SMD POWER INDUCTORS SELECTION GUIDE
|
|
- Clement Hicks
- 5 years ago
- Views:
Transcription
1 SMD POWER INDUCTORS SELECTION GUIDE Unshielded Inductor Type Item Type Dimension (mm) Inductance (uh) Isat (A) Lead Free P/N. DA SERIES DA ~ ~ 2.18 DA42NP DA ~ ~ 5.50 DA43NP DA ~ ~ 6.79 DA53NP DA ~ ~ 4.50 DA54NP DA ~ ~ 1.59 DA73NP DA ~ ~ 2.30 DA75NP DA ~ ~ 2.38 DA104NP DA ~ ~ 3.50 DA105NP FDA SERIES FDA ~ ~ 3.5 FDA32NP FDA ~ ~ 4.5 FDA43NP FDA ~ ~ 13.5 FDA54NP FD SEIES FD ~ ~ 4.4 FD42NP DH SERIES DH ~ ~ 3.0 DH104NP DBS SERIES DBS ~ ~ 2.88 DBS73NP DBS ~ ~ 2.88 DBS75NP DBS ~ ~ 2.40 DBS133NP DBS ~ ~ 9.90 DBS135NP DBS ~ ~ 8.0 DBS1312NP DBS187C ~ ~ 25.0 DBS187CNP DRH SERIES DBS ~ ~ 5.3 DBS119NP Shielded Inductor Type DRH ~ ~ 1.84 DRH73NP DRH ~ ~ 2.1 DRH74NP DRH ~ ~ 8.26 DRH124NP DRH ~ ~ 4.5 DRH125NP DRH ~ ~ DRH127NP Specifications other than the above will be furnished upon request. 161
2 DRH-R SERIES DRH5D28R ~ ~ 3.09 DRH5D28RNP DRH104R ~ ~ 9.82 DRH104RNP DRH-D SERIES DRH4D ~ ~ 2.46 DRH4D18NP DRH4D ~ ~ 3.52 DRH4D28NP DRH5D ~ ~ 1.97 DRH5D18NP DRH5D ~ ~ 2.77 DRH5D28NP DRH6D ~ ~ 3.00 DRH6D28NP DRH6D ~ ~ 3.50 DRH6D38NP SD SERIES SD ~ ~ 3.5 SD73NP SD ~ ~ 4.0 SD75NP SD ~ ~ 0.22 SD104NP SD ~ ~ 3.6 SD125NP SD ~ ~ 10.0 SD126NP SD ~ ~ 13.0 SD127NP SP SERIES SP ~ ~ SP52NP DC/DC Converter Inductor DRH124B DRH124BNP DRH125B CUSTOMER OFFER DRH125BNP DRH126B REQUIRE DRH126BNP DRH127B DRH127BNP RDBS RDBS62NP Typical Schematic Circuit (for ref.) Securable construction and electrical specification SIZE: 4.0X4.0X2.0 (max.) ~ 12.0x12.0x8.0 (max.) mm INDUCTANCE: RATED CURRENT: 0.6uH-10mH 0-20A Produce Schematic: 162
3 SMD POWER INDUCTORS MODEL DA Series Ferrite core & AG electrode. Large terminal surface suitable for good PCB mounting. High current capacity. Low core loss for high frequency power application. Operating temperature -25 to + 85 Output choke coil for DC/DC converter etc. Used in power supply of all kinds of small size electrical device, such as switching power supplies, charger, various computer peripheral equipment etc. DIMENSION (mm) TYPE A B C D E F G Package (pcs/reel) DA32 3.0± ±0.3 Max2.5 Φ DA42 4.0± ±0.2 Max3.0 Φ DA43 4.0± ±0.3 Max.3.5 Φ DA53 5.2± ±0.3 Max3.3 Φ DA54 5.2± ±0.3 Max.4.8 Φ DA73 7.0± ±0.3 Max3.8 Φ DA75 7.0± ±0.3 Max5.3 Φ DA ± ±0.3 Max4.3 Φ DA ± ±0.3 Max5.7 Φ
4 ELECTRICAL CHARACTERISTIC SMD POWER INDUCTORS TYPE: *DA32 DA42. DA43. DA53. DA54. DA73. DA75. DA104. DA105 PART D.C.R.(mΩ) MAX. RATED CURRENT (A) No. L(µH) DA42DA43 DA53DA54 DA73DA75 DA104DA105DA42DA43DA53DA54 DA73DA75 DA104DA105 1R R R R R R R R R R R R R R R R R R *DA NEW DEVELOPMENT MEASURING FREQUENCY (L): DA42 DA43 DA53 DA54 (1.0~8.2µH) at 100kHz/1.0V DA42 DA43 DA53 DA54 ( 10µH) at 1kHz/1.0V DA73 DA75 DA104 DA105 at 1kHz/1V TOLERANCE OF INDUCTANCE: DA42 DA43 (1.0~27µH) DA53 DA54(1.0~18µH) DA104(10~47µH) DA105(10~39µH) ±20%(M) DA43(33~68µH) DA54(22~330µH) DA73 DA75 DA104(56~560µH) DA105(47~820µH) ±10%(K) RATED CURRENT: THE VALUE OF DIRECT CURRENT WHEN THE INDUCTANCE IS 10% LOWER THAN IT'S INITIAL VALUE AT D.C SUPERPOSITION OR WHEN COIL TEMPERATURE RISE T=40,WHICHEVER IS SMALLER. (Ta=20 ) 164
5 SMD POWER INDUCTORS MODEL SD Series The SD series are characterized by low profile, low DC resistance, and high current handing capacities. Because they ate magnetically shielded, these parts can be used in high-density mounting configurations. Flat bottom surface ensures secure, reliable mounting. Provided in embossed carrier tape packaging for use with automatic mounting machines. Operating temperature -25 to + 85 Portable telephones. Personal computers. Hard disk drives. Other electronic equipment. DIMENSION (mm) TYPE A B C D E F G H Package (pcs/reel) SD73 7.0± ± Max 2.0± SD75 7.0± ± Max 2.0± SD ± ± ± ± SD ± ± ± ± SD ± ± ± ± SD ± ± ± ±
6 ELECTRICAL CHARACTERISTIC SMD POWER INDUCTORS TYPE: SD73, SD75, SD125, SD126, SD127 PARTS No. L (µh) D.C.R. (mω) Isat (A) Max. Irms (A) Max. SD73 SD75 SD104 SD125 SD126 SD127 SD73 SD75 SD104 SD125 SD126 SD127 SD73 SD75 SD104 SD125 SD126 SD12 1R R R R R R R R R R R R Tolerance of inductance: at 1.0uH~8.2uH ±30%(N), at 10uH~1500uH ±20%(M) Tolerance of DCR: SD73; SD75 (Max.) SD104; SD125; SD126; SD127 (TYP.) TESTING FREQUENCY OF INDUCTANCE: 1 khz, 1.0V; Isat: THE CURRENT WHEN THE INDUCTANCE DECREASES TO 10% OVER OF INITIAL VALUE. (Ta=25 ) Irms: THE CURRENT WHEN THE TEMPERATURE OF COIL IS INCREASED BY 40. (Ta=25 ) THE RATED CURRENT INDICATED THE SMALLER ONE BETWEEN Isat AND Irms. 166
7 SMD POWER INDUCTORS MODEL FDA Series STAMPING B 100 D E A C Surface mounting type. High mounting stability. Large rated current and high inductance. Use high performance ferrite core. Density design, small size, low cost. Low radiation. Operating temperature -25 to + 85 Output choke coil for DC/DC converter etc. Used in power supply of all kinds of small size electrical devices, such as switching power supplies, charger, PDA, LCD, various computer peripheral equipment etc. DIMENSION (mm) TYPE A B C D E F G H Package (pcs/reel) FDA31 1.6± ± ± ± Min FDA32 2.5± ± ± ± Min FDA43 3.2± ± ± ± Min FDA54 5.0± ± ± ± Min
8 ELECTRICAL CHARACTERISTIC TYPE: PARTS No. FDA31, FDA32, FDA43, FDA54. SMD POWER INDUCTORS L D.C.R.(Max.) S.R.F (MHz) Isat(A) Max. Irms (A) Max. (µh) FDA31 FDA32 FDA43 FDA54 FDA31 FDA32 FDA43 FDA54 FDA31 FDA32 FDA43 FDA54 FDA31 FDA32 FDA43 FDA54 R R R R R R R R R R R R R R R R *FDA NEW DEVELOPMENT Tolerance of inductance: 0.39uH~8.2uH ±20%(M); 10.0uH~1000.0uH± 10%(K). TESTING FREQUENCY OF INDUCTANCE: at 0.39uH~82uH@1MHz, 1.0V; 100uH~1000uH@1KHz, 1.0V. Isat: THE CURRENT WHEN THE INDUCTANCE DECREASES TO 10% OF INITIAL VALUE. (Ta=25 ) Irms: THE CURRENT WHEN THE TEMPERATURE OF COIL IS INCREASED BY 40. (Ta=25 ) THE RATED CURRENT INDICATED THE SMALLER ONE BETWEEN Isat AND Irms. 168
9 SMD POWER INDUCTORS MODEL FD Series Miniature, low profiles DC choke. Suitable for reflow soldering. Supplied on tape and reel for auto assembly. Operating temperature -25 to + 85 Output choke coil for DC/DC converter etc. Used in power supply of all kinds of small size electrical devices, such as switching power supplies, charger, various computer peripheral equipment etc. DIMENSION (mm) TYPE A B C D E F G H Package (pcs/reel) FD Max. 6.5 Max. 3.5 Max ELECTRICAL CHARACTERISTIC PART NO L (uh) D.C.R. (mω) Max. I.D.C. (A) Max. 1R R R R R R Tolerance of inductance: ±20%(M). TESTING FREQUENCY OF INDUCTANCE: 100KHz, 1.0V. Isat: THE CURRENT WHEN THE INDUCTANCE DECREASES TO 90% OVER OF INITIAL VALUE. (Ta=25 ) Irms: THE CURRENT WHEN THE TEMPERATURE OF COIL IS INCREASED BY 40. (Ta=25 ) THE RATED CURRENT INDICATED THE SMALLER ONE BETWEEN Isat AND Irms. Specifications other than the above will be furnished upon request. 169
10 SMD POWER INDUCTORS MODEL DBS Series Surface mounting type. Low profile Large rated current and high inductance. Density design, small size, low cost. Low radiation Operating temperature -25 to + 85 Output choke coil for DC/DC converter etc. Used in power supply of all kinds of small size electrical devices, such as switching power supplies, charger, various computer peripheral equipment etc. DIMENSION (mm) TYPE A B C D E F G H J FIG Package (pcs/reel) DBS73 7.3± ± Max DBS75 7.3± ± Max DBS ± ± Max DBS ± ± Max DBS ± ± Max DBS187C Max 14.5 Max 7.3 Max
11 ELECTRICAL CHARACTERISTIC SMD POWER INDUCTORS TYPE: PARTS No. DBS73, DBS75, DBS133, DBS135, DBS1312, DBS187 L (µh) D.C.R. (mω) Max. Isat (A) Max. Irms (A) Max. DBS73 DBS75 DBS133 DBS135 DBS1312 DBS187 DBS73 DBS75 DBS133 DBS135 DBS1312DBS187C DBS73 DBS75 DBS133 DBS135 DBS1312DBS187C R R R R R R R R R R R R R Tolerance of inductance: K= ±10%; M= ±20%. TESTING FREQUENCY OF INDUCTANCE: AT 100KHz, 0.1V Isat: THE CURRENT WHEN THE INDUCTANCE DECREASES TO 90% OVER OF INITIAL VALUE. (Ta=25 ) Irms: THE CURRENT WHEN THE TEMPERATURE OF COIL IS INCREASED BY 40. (Ta=25 ) THE RATED CURRENT INDICATED THE SMALLER ONE BETWEEN Isat AND Irms. 171
12 SMD POWER INDUCTORS MODEL DH Series S 220 Miniature, low profile DC choke. Suitable for reflow soldering. Supplied on tape and reel for auto assembly. Operating temperature -25 to + 85 Output choke coil for DC/DC converter etc. Used in power supply of all kinds of small size electrical devices, such as switching power supplies, charger, various computer peripheral equipment etc. * * MAX. 5.0 DH104 * MAX. 6.0 DH105 * MAX. 7.0 DH106 * MAX. 8.0 DH107 ELECTRICAL CHARACTERISTIC PART NO L (uh) D.C.R. (mω) Max. I.D.C. (A) Max Tolerance of inductance: K= ±10%; M= ±20%. TESTING FREQUENCY OF INDUCTANCE: 100KHz, 1.0V. Isat: THE CURRENT WHEN THE INDUCTANCE DECREASES TO 90% OVER OF INITIAL VALUE. (Ta=25 ) Irms: THE CURRENT WHEN THE TEMPERATURE OF COIL IS INCREASED BY 40. (Ta=25 ) THE RATED CURRENT INDICATED THE SMALLER ONE BETWEEN Isat AND Irms. Specifications other than the above will be furnished upon request. 172
13 SMD POWER INDUCTORS MODEL DRH Series With magnetic shield against radiation. Large terminal surface for good PCB mounting. High current capacity. Low core loss for high frequency power application. Operating temperature-25 to +85 Output choke coil for DC/DC converter etc. Used in power supply of all kinds of small size electrical devices, such as switching power supplies, charger, various computer peripheral equipment etc. DIMENSION (mm) TYPE A B C D E F G H Package (pcs/reel) FIG DRH73 7.3± ± Max DRH74 7.3± ± Max DRH ± ± Max DRH ± ± Max DRH ± ± Max
14 ELECTRICAL CHARACTERISTIC SMD POWER INDUCTORS TYPE: DRH73, DRH74, DRH124, DRH125, DRH127. PARTS No. L(µH) D.C.R.(Max.) Isat (Max.) Irms (Max.) DRH73 DRH74 DRH124 DRH125 DRH127 DRH73 DRH74 DRH124 DRH125 DRH127 DRH73 DRH74 DRH124 DRH125 DRH127 1R R R R R R R R TESTING FREQUENCY OF INDUCTANCE: 1 khz, 1.0V Tolerance of inductance: 1.0uH~8.2uH ±30%(N); 10.0uH~1000.0uH± 20%(M). RATED CURRENT: THE VALUE OF DIRECT CURRENT WHEN THE INDUCTANCE IS 10% LOWER THAN IT'S INITIAL VALUE AT D.C. SUPERPOSITION OR WHEN COIL TEMPERATURE RISE T=40, WHICHEVER IS SMALLER. (Ta=20 ). 174
15 SMD POWER INDUCTORS MODEL DRH-R Series Magnetically shielded. Surface mounting type. Low profile. Large rated current and high inductance. Density design, small size, low cost. Low radiation. Operating temperature -25 to + 85 Output choke coil for DC/DC converter etc. Used in power supply of all kinds of small size electrical devices, such as switching power supplies, charger, various computer peripheral equipment etc. DIMENSION (mm) TYPE A B C D E F G H J Package (pcs/reel) DRH5D28R 5.9± ± ± Max DRH104R 10.0± ± ± Max
16 ELECTRICAL CHARACTERISTIC TYPE: PARTS No. SMD POWER INDUCTORS DRH5D28R, DRH104R L (µh) D.C.R. (mω) Max. Isat (A) Max. Irms (A) Max. DRH5D28R DRH104R DRH5D28R DRH104R DRH5D28R DRH104R 1R R R R R R R R R R Tolerance of inductance: DRH5D28R: ±30%(N), DRH104R: 1.5uH~8.2uH: ±30%(N); 10uH~1000uH:±20%(M). TESTING FREQUENCY OF INDUCTANCE: at 100KHz, 1.0V Isat: THE CURRENT WHEN THE INDUCTANCE DECREASES TO 65% OVER OF INITIAL VALUE. (Ta=25 ) Irms: THE CURRENT WHEN THE TEMPERATURE OF COIL IS INCREASED BY 30 (DRH104R); 40 (DRH5D28R). (Ta=25 ) THE RATED CURRENT INDICATED THE SMALLER ONE BETWEEN Isat AND Irms. 176
17 SMD POWER INDUCTORS MODEL DRH-D Series With magnetic shield against radiation. Large terminal surface for good PCB mounting. High current capacity. Low core loss for high frequency power application. Operating temperature-25 to +85. Output choke coil for DC/DC converter etc. Used in power supply of all kinds of small size electrical devices, such as switching power supplies, charger, various computer peripheral equipment etc. DIMENSION (mm) TYPE A B C D E F G H Package (pcs/reel) DRH4D Max 5.0 Max 2.0 Max Max DRH4D Max 5.0 Max 3.0 Max Max DRH5D Max 6.0 Max 2.0 Max Max DRH5D Max 6.0 Max 3.0 Max Max DRH6D Max 7.0 Max 3.0 Max Max DRH6D Max 7.0 Max 4.0 Max Max
18 ELECTRICAL CHARACTERISTIC SMD POWER INDUCTORS TYPE: DRH4D18, DRH4D28, DRH5D18, DRH5D28, DRH6D28, DRH6D38. PARTS No. L(µH) (A) D.C.R.(Max.) (mω) Isat (Max.) Irms (Typ.) DRH4D18 DRH4D28 DRH5D18 DRH5D28 DRH6D28 DRH6D38 DRH4D18 DRH4D28 DRH5D18 DRH5D28 DRH6D28 DRH6D38 DRH4D18 DRH4D28 DRH5D18 DRH5D28 DRH6D28 DRH6D3 1R R R R R R R R R R R R R R R Tolerance of inductance: ±30%(N). TESTING FREQUENCY OF INDUCTANCE: 10 khz, 1.0V; DRH4D18; DRH4D28 AT 100KHz, 1.0V Isat: THE CURRENT WHEN THE INDUCTANCE DECREASES TO 65% OVER OF INITIAL VALUE. (Ta=25 ) Irms: THE CURRENT WHEN THE TEMPERATURE OF COIL IS INCREASED BY 30. (Ta=25 ) THE RATED CURRENT INDICATED THE SMALLER ONE BETWEEN Isat AND Irms. 178
19 MODEL SP52 Series SMD POWER INDUCTORS G E F Low radiation DC choke. Suitable for reflow soldering. Supplied on tape and reel for auto assembly. High inductance voltage. Operating temperature -25 to + 85 Step--up coil for buzzer and DC/DC circuit, such as watches, toys, digital camera,pda. DIMENSION (mm) TYPE A B C D E F G Package (pcs/reel) SP52 4.5± Max 6.6± ± ELECTRICAL CHARACTERISTIC PART NO. L (Uh) D.C.R. (Ω) Max Tolerance of inductance: ±30%(N). TESTING FREQUENCY OF INDUCTANCE: 1KHz, 1.0V. Specifications other than the above will be furnished upon request. 179
20 SMD POWER INDUCTORS MODEL DRH-B Series RDBS62 Series DRH-B Magnetically shielded. Surface mounting type. Low profile. Large rated current and high inductance. Density design, small size, low cost. Low radiation Operating temperature -25 to + 85 RDBS62 STAMP 470 Choke coil for DC/DC converter filter etc. Converter inductor for set-up and set-down DC power. DIMENSION (mm) TYPE A B C D E F G H J Package (pcs/reel) DRH124B 12.0± ± Max DRH125B 12.0± ± Max DRH126B 12.0± ± Max DRH127B 12.0± ± Max Electrical specification is customer offer require. RDBS 62 Series Packing: tape and reel :1500pcs 180
Power Inductors. Type 3622 Series. Type 3622 Series. Electrical Characteristics A Series. Key Features
The 3622 Series is an innovative design for a high power SMD choke. It combines Tyco quality with low price and high long-term reliability. The layout and profile make it a highly appropriate component
More informationCOMPACT SHIELDED SMD POWER INDUCTOR FOR AUTOMOTIVE
FEATURES APPLICATIONS High reliability wire-wound construction Shielded construction reduces EMI Automotive grade power inductor TS-16949 qualified production PPAP level 3 support AEC-Q200 qualified with
More informationSMD Power Inductors. Type 3624 Series. Type 3624 Series. Electrical Characteristics A Series. Environmental Characteristics A Series
The 3624 series unique design allows for a range of products which give not only a high current rating, but minimizes the board space required for this product. Tyco Sigma quality, matched with reliability
More informationPower Inductor. Non-shielded. PDH Series 2. PD Series 4. PCD Series 7. Packaging Info 10 Environmental Specifications 12
Power Inductor Non-shielded PDH Series 2 PD Series 4 PCD Series 7 Packaging Info 10 Environmental Specifications 12 Tel: 1-888-734-7347 Fax: 919-850-9504 E-mail marketing@seielect.com http://www.seielect.com
More informationCOMPACT SHIELDED SMD POWER INDUCTOR FOR AUTOMOTIVE
FEATURES APPLICATIONS Low profile 3mm height for compact applications Advanced and high reliability wire-wound construction Shielded construction reduces EMI Automotive grade power inductor TS-16949 qualified
More informationPower Inductor. Shielded. PS Series 2. PCS Series 4. PCDR Series 7. PCDS Series. SCDS Series 12. Packaging Info 14. Environmental Specifications
Power Inductor Shielded PS Series 2 PCS Series 4 PCDR Series 7 PCDS Series 10 SCDS Series 12 Packaging Info 14 Environmental Specifications 16 Tel: 1-888-734-7347 Fax: 919-850-9504 E-mail marketing@seielect.com
More informationShielded SMD Power Inductor
PCDR 0728 / 0730 / 0732 / 0745 / 1045 PCDR 0628 / 1255 / 1265 / 1275 Features Dimensions Unit:mm -Compact, low profile with low DCR and large current -With magnetically shielded against radiation -Flat
More informationShielded SMD Power Inductor
PCS62B / 64B PCS73 / 74 Features 1.5 -High power, High saturation inductors -With magnetically shielded against radiation 5.0 -Directly connected electrode on ferrite core -Highly accurate dimensions for
More information2R2. Design Code Design Code M ±20%
Wire Wound SMD Power Inductors WPN Series Operating Temp. : -40 ~+125 (Including self-heating) FEATURES Fe base metal material core provides large saturation current Metallization on ferrite core results
More informationTYPE A B C D A B C BPSC ± ± BPSC ± ±
SMD Shielded Power Inductors Series Series Features RoHS, Halogen Free and REACH Compliance Magnetic shielded Various package size and wide inductance range Applications AP Routers STBs LCD TVs and monitors
More informationPOWER INDUCTOR PIP. AiT Semiconductor Inc. FEATURE APPLICATION ORDERING INFORMATION
FEATURE 1. Low profile and Compact Size 2. Low DC resistance 3. Open magnetic circuit construction APPLICATION 3011 2810-R 3015B 10040 1. LCD panels, DC/DC Converters 2. Digital camera, PDA 3. Portable
More informationP7609 Family POWER INDUCTOR PRODUCT DATA SHEET
PRODUCT DATA SHEET POWER INDUCTOR P7609 Family Features Current to 3.8A Low DCR (to 30mΩ) Low profile (to 2.2mm) Surface Mount Flat top for pick & place Electroplated terminals Applications DC-DC Converters
More information2R2. 4 Nominal Inductance Packing Tape & Reel. Design Code M ±20%
Wire Wound SMD Power Inductors WPN Series Operating temperature range : -40 ~+125 (Including self-heating) FEATURES Fe base metal material core provides large saturation current Metallization on ferrite
More informationWire Wound Chip Inductor (Ferrite)
FEATURES Very strong solderability by reflow soldering, soldering iron or wave soldering Highly accurate dimensions Automated mounting capable Terminals are highly resistant to pull forces Highly resistant
More informationSPECIFICATION FOR APPROVAL INDEX
SPECIFICATION FOR APPROVAL INDEX COVER PAGE INDEX. 0 SHAPES & DIMENSION. 1 PART NUMBER CODE 2 PRODUCT DETAIL 3-5 REEL DIMENSIONS 6 REEL PACKAGING QUANTITY 6 RELIABILITY TEST AND CONDITIONS 7 RECOMMENDED
More informationSMD Power Inductor-VLH
SMD Power Inductor-VLH Applications Pagers, Cordless phone. High frequency communication products. Personal computers. Disk drives and computer peripherals. power supply circuits. and rated current ranges
More informationSMD Power Inductor SR0602/SR0603/SR0604 SR0805/SR1006/SR1011/SR1307 Series
SMD Power Inductor SR0602/SR0603/SR0604 SR0805/SR1006/SR1011/SR17 Series CONFIGURATION & DIMENSIONS(m/m) 101 A A FEATURES Excellent solderability and high heat resistance Excellent terminal strength construction
More information74 ( ) 127 ( ) A [0,315] 2,20 [0,079] [0,087] 1,60 [0,063] Land Pattern
A FEATURES Shielded Construction with very low DCR Heating Current rating up to 17.9 Amps Saturation Current rating up to 7.5 Amps (based on only 10% inductance drop) Inductance up to 1mH for all case
More informationPower Inductors - RFB Series
Document 277-1 Power Inductors - RFB Series These low cost power inductors offer a wide range of inductance values, from 2.2 µh to 18 mh. They have an open magnetic construction that gives them high current
More information2R2. Design Code M ±20%
Wire Wound SMD Power Inductors WPN Series Operating Temp. : -40 ~+125 (Including self-heating) FEATURES Fe base metal material core provides large saturation current Metallization on ferrite core results
More informationP7604 Family SHIELDED POWER INDUCTOR PRODUCT DATA SHEET
PRODUCT DATA SHEET SHIELDED POWER INDUCTOR P7604 Family Features Magnetic Shielding High Current (to 5A) Low DCR (to 20mΩ) Low profile (3-7mm) Surface Mount Flat top for pick & place Pb-free Applications
More informationPower Inductors RFB Series
Document 277-1 Power Inductors RFB Series Low cost, high current power inductors 2.2 µh to 18 mh inductance range 500 V isolation from winding to core. RFB0810 and RFB1010 have a flame retardant polyolefin
More informationInductors for Power Circuits
Inductors for Power Circuits Wound/STD magnetic shielded CLF series Type: CLF7045 (6.9x7.2 mm) CLF0040 (9.7x0.0 mm) Issue date: September 202 (/4) Inductors for Power Circuits Wound/STD Magnetic Shielded
More informationPower Inductor DIP Type
In EC TYPE series color band are marked for identification. These bands indicate inductance value and tolerance. For values below 0.1uH, Gold indicates the decimal point and the next three bands indicate
More informationMulti-Layer Power Inductors (IP_L Series)
Multi-Layer Power Inductors (IP_L Series) For Choke Application ORDERING CODE IP 2012 2R2 M P L 9 PRODUCT CODE IP : Multilayer Power Inductor (Lead Free) DIMENSION (L X W) Code Dimension EIA 1608 1.6 x
More informationJapan. ND (Size 2012) (Size 1608) Non winding (RF, 1E) and wire wound type chip inductors for automatic mounting and high-density mounting
Chip Inductors Japan Series: Chip Type: RF, NC, FA, PE, EA RE, ND, NA, FC, FB, SA, PC, PA, RF (Size 5) 1E (Size 1608) ND (Size 2012) 1C (Size 2520) 1A (Size 3225) FB (Size 4532) Non winding (RF, 1E) and
More informationWire Wound Chip Inductors Ferrite SMD
GmbH Mathildenstr. 10A 82319 Starnberg Germany Wire Wound Chip Inductors Ferrite SMD 5/10/2018 1/13 GmbH www.freltec.com SPECIFICATION Part Number 095 05 * 101 * J * E02 _ * Type Size Value Packing Current
More informationFrelTec GmbH. SMD Power Inductors
GmbH Mathildenstr. 10A 82319 Starnberg Germany 10/12/2011 1/13 GmbH www.freltec.com SPECIFICATION Part Number 107 252010 * G * 100 * M E02 * Type Size Use Value Packing 107 : SMD Power Inductor 252010:
More informationINPAQ Global RF/Component Solutions
WIP252012Q ZF Series Specification Product Name Series Power Inductor WIP252012Q ZF Series Size EIAJ 2520 WIP252012Q ZF Series Engineering Specification 1. Feature This specification applies Low Profile
More informationThis specification applies to the Pb Free high current type SMD inductors for
SCOPE: This specification applies to the Pb Free high current type SMD inductors for Warn : This product series can t be used in synchronous rectification circuit that is over 24V. PRODUCT INDENTIFICATION
More informationCONTENT Ferrites for cable assembly
www.schmid-m.com EMC & Inductors CONTENT Ferrites for cable assembly Round cable snap ferrites SMLF Flat Ferrite with Clip SRPS Flat Ferrite Cores SRP Toroidal Cores ST Axial Ferrite Beads SRH Ferrite
More informationSRP1238A Series - Shielded Power Inductors
*RoHS and AEC-Q COMPLIANT Features Shielded construction Carbonyl powder core High saturation current Inductance range:.1 to 1 µh AEC-Q compliant RoHS compliant* and halogen free** SRP1A Series - Shielded
More informationSLF Series. SMD Power Inductors APPLICATIONS OUTLINE PRODUCT IDENTIFICATION FEATURES SLF - -
Yageo corporation INUCTORS / BEAS SLF Series SM Power Inductors APPLICATIONS Portable telephones, computers, hard disk drives and other electronic equipment. OUTLINE SLF series is designed for low profile
More informationPower Inductors (IP Series)
Multi-Layer Power Inductors (IP Series) ORDERING CODE... 1 Standard External Dimensions... 2 Power Inductor for Choke (L Type)... 3 Power Inductor for DC/DC converter (S Type)... 4 Testing Condition &
More informationSCDS Series. Shielded SMD Power Inductors. Features
YAGEO CORPORATION SMD INDUCTOR / BEADS Series Shielded SMD Power Inductors Applications Power Supply for VTRs OA Equipment LCD Televisions Notebook PCs Portable Communication Equipment DC / DC Converters,
More informationB Unit: mm TYPE A B C D E F. How to Order KL 1410 M T R60. SEI Type Dimensions Tolerance Packaging Inductance
DIP Power Inductor KL Scope This specification applies to DIP Power Choke. High power Features Magnetic shielded construction for high density board assembly High performance excellent DC current characteristics
More informationThe ASPIAIG-F series of molded smd power inductors come in a variety of package sizes. The series supports current handling up TOLERANCE M: ±20%
SERIES DESCRIPTION The SPIIG-F series of molded smd power inductors come in a variety of package sizes. The series supports current handling up FETURES PPLICTIONS PPP ready and supported Excellent current
More informationIron Powder Core SMD Power Inductors
Iron powder core inductors feature a homogeneous construction, exhibiting low loss and reduced inductance drop due to applied current, allowing for higher current ratings in low profile packages. PRODUCT
More information(1) SHAPES AND DIMENSIONS
Ⅰ. SCOPE: This specification applies to the Pb Free high current type SMD inductors for PRODUCT INDENTIFICATION MSI - 100807 - R12 M 1 2 3 4 1 Product Code 2 Dimensions Code 3 Inductance Code 4 Tolerance
More informationINDUCTORS SMD POWER INDUCTORS SMD
INDUCTORS, COIS, FITERS & FERRITES INDUCTORS SMD POWER INDUCTORS SMD K AND CK SERIES STANDARD MUTIAYER INDUCTORS Features: Internal printed coil structure that creates a closed magnetic circuit which acts
More informationCatalogue For Metal Alloy Inductor
Catalogue For Metal Alloy Inductor Features A coil embedded inductor with magnetic metal alloy powder. Shielded construction. Superior DC current characteristics, suitable for large current application.
More informationRADIAL LEADED FIXED INDUCTORS
PK0406/0608/0707/0807/0810/1010/1012/1018/1213 TYPE Shape and size : (Dimensions are in mm) Features : Ordering information :.Low cost. PK 0608-503 K - S0 - TF.Wide range of inductance. (1) (2) (3) (4)
More informationWire Wound Chip Inductor (Ferrite)-NL Series
Wire Wound Chip Inductor (Ferrite)-NL Series Construction 1 Molded resin 3 Ferrite core 2 Electrode (Ag) 4 Magnet wire 1.These revolutionary, highly reliable wound chip inductors for automatic mounting,
More informationHigh Current Power Inductors HCM1104 Series
High Current Power Inductors HCM1104 Series HALOGEN HF FREE Pb SMD Device Description Halogen free, lead free, RoHS compliant 125 C maximum total operating temperature 11.5x 10.3 x 4.0mm maximum surface
More informationWire Wound Chip Inductor
FEATURES Ceramic base provides high SRF Ultra-compact inductors provide high Q factors High current range available Miniature SMD chip inductor for fully automated assembly Outstanding endurance from Pull-up
More informationPower Inductor DIP Type
PK SERIES PEAKING COIS. Applications:.TVs and Audio equipment..telecommunication devices..personal computer..switching Power Supply..Other noise filter. Shape and Dimensions(Dimensions are in mm) : Item
More informationSMD Common Mode Choke - CUW Series. CUW Series For USB 2.0, IEEE1394b, LVDS Applications. Product Identification
SMD Common Mode Choke - CUW Series CUW Series For USB 2.0, IEEE1394b, LVDS Applications A full series of common mode choke is designed for excellent noise attenuation with compact sizing for use in wide
More informationHigh Current, High Frequency Power Inductors HCM1103 Series
High Current, High Frequency Power Inductors HCM1103 Series HALOGEN HF FREE Pb Description Halogen free, lead free, RoHS compliant 125 C maximum total temperature operation 11.5 x 10.3 x 3.0mm maximum
More informationFrelTec GmbH. Wire Wound Ceramic Chip Inductors SMD
GmbH Mathildenstr. 10A 82319 Starnberg Germany Wire Wound Ceramic Chip Inductors SMD 8/2/2017 1/15 GmbH www.freltec.com SPECIFICATION Part Number 091 02 * 101 * J * S * T05 ** _ Type Size Value Toleranc
More informationSMD Wire Wound Chip Inductor
GSW Series SMD Wire Wound Chip Inductor Scope -Ceramic body and wire wound construction provide highest s available.. Features -Ceramic base provide high -Ultra-compact inductors provide high Q factors
More informationData sheet SMD Wire Wound Chip Inductor WL Series
Data sheet SMD Wire Wound Chip Inductor W Series Scope -Ceramic body and wire wound construction provide highest s available.. Features -Ceramic base provide high -Ultra-compact inductors provide high
More informationPrevention of electromagnetic interference to signals on the secondary side of electronic equiepmet.
Multilayer Ferrite Chip Inductors - CKFI Features 1. Monolithic structure for high reliability compact size inductor possible. 2. No cross coupling due to magnetic shield. 3. Perfect shape for mounting
More information1 Moulded resin 2 Electrode (Ag) 3 Ferrite core 4 Magnet wire
Features: Very strong solderability by flow soldering, soldering iron or wave soldering. Highly accurate dimensions, can be mounted automatically. Terminals are highly resistant to pull forces. Highly
More informationCM45, CM32, CM25, CM20, CM16, CM10 SMT Chip Inductors
*RoHS COMPLIANT 220K Features High resistance to heat and humidity Resistance to mechanical shock and pressure Accurate dimensions for automatic surface mounting Wide inductance range (1.0 nh to 1000 µh)
More informationMulti-Layer Power Inductors (IP Series)
Multi-Layer Power Inductors (IP Series) For DC/DC Converter Application ORDERING CODE IP R M P S 9 PRODUCT CODE IP : Multilayer Power Inductor (Lead Free) DIMENSION (L X W) Code Dimension EIA. x. mm. X.
More informationWire Wound Chip Inductor (Ferrite)-NL Series
Wire Wound Chip Inductor (Ferrite)-NL Series Construction Molding Type 1 2 3 4 1 Molded resin 3 Ferrite core 2 Electrode (Ag) 4 Magnet wire Open Type 4 1 3 2 1 Ferrite core 3 Electrode (Ag/Pd+Ni+Sn) 2
More informationSMT Shielded Power Inductors IDM6025, IDM6028, IDM6045, IDM7032, IDM7045, IDM7055, IDM10145, IDM12555, IDM12565, IDM12575, IDM6028.
SMT Shielded Power s IDM6025, IDM6028, IDM6045, IDM7032, IDM7045, IDM7055, IDM10145, IDM12555, IDM12565, IDM12575, IDM6028 Configurations: FEATURES Magnetically shielded construction. Compact and thin.
More informationUnshielded Power Inductor / PI Series
.Features: 1. Excellent solderability and high heat resistance. 2. Excellent terminal strength construction. 3. Packed in embossed carrier tape and can be used by automatic mounting machine..applications:
More informationSurface Mount Shielded Power Inductors
SDRH Series ( ------SDRH Applications( : Features( : 1, To be high saturation for surface mounting.( 2, Surface mount inductor with high current rating.( 3.Low resistance to keep power loss minimum.( 4,
More informationMTU1 Series Isolated 1W Single & Dual Output SM DC/DC Converters
www.murata-ps.com MTU1 Series SELECTION GUIDE FEATURES Patent Protected UL60950 recognised Footprint over pins 0.69cm 2 Single & dual isolated output 1kVDC Isolation Hi Pot Test Efficiency up to 88% (Typ.)
More informationHigh Current Power Inductors HCM1104 Series
High Current Power Inductors HCM1104 Series HALOGEN HF FREE Pb SMD Device Description Halogen free, lead free, RoHS compliant 125 C maximum total operating temperature 11.5x 10.3 x 4.0mm maximum surface
More informationVLS-E series. Inductors for Power Circuits. Wound Ferrite
May 2013 Inductors for Power Circuits Wound Ferrite VLS-E series VLS201610E VLS201612E VLS2010E VLS2012E VLS252008E VLS252010E VLS252012E VLS252015E VLS3010E VLS3012E VLS3015E VLS4012E (1/52) REMINDERS
More informationWLCW1608 SMD Wire Wound Ceramic Chip Inductors
WLCW1608 SMD Wire Wound Ceramic Chip Inductors *Contents in this sheet are subject to change without prior notice. Page 1 of 7 ASC_WLCW1608 Series_V7.0 Jun. 2017 Features 1. Standard chip size bobbin with
More informationInductors for Power Circuits
Inductors for Power Circuits Wound/STD magnetic shielded CLF-D series Type: CLF7-D (.9x7. mm) Issue date: May Conformity to RoHS Directive: This means that, in conformity with EU Directive /9/EC, lead,
More informationWire Wound Chip Inductor (Ferrite) Standard LN1210 LN1812
Wire Wound Chip Inductor (Ferrite) Standard LN1210 LN1812 Wire Wound Chip Inductor (Ferrite) - Standard Features Very strong solderability by flow soldering, soldering iron or wave soldering Highly accurate
More informationPower Inductor SMT Type
UPI F SRIS ULTRA HIGH CURRNT SMT POWR INDUCTOR. Applications:.PDA/Notebook/Desktop, and server applications..dc/dc converters in distributed power systems..dc/dc converter for Field Prograable Gate Array(FPGA).
More informationAXIAL LEADED COATED INDUCTORS
EC TYPE COLOR CODE GUIDE In EC TYPE series color band are marked for identification. These bands indicate inductance value and tolerance. For values below 0.1uH, Gold indicates the decimal point and the
More informationMTU2 Series Isolated 2W Single & Dual Output SM DC/DC Converters
www.murata-ps.com MTU2 Series SELECTION GUIDE FEATURES Patent Protected UL 9 Recognised Footprint over pins.69cm 2 Single & dual isolated output 1kVDC Isolation Hi Pot Test Efficiency up to 85% (Typ.)
More informationMagnetics Short Form Catalog Electronics Division
Magnetics Short Form Catalog Electronics Division Eaton Electronics Product Selection Tools PARAMETRIC SEARCH Drill down into the Eaton Electronics product database to find the right part for your application.
More informationFP1008R5 and FP1008R6 High frequency, high current power inductors
Technical Data 152 Effective April 217 FP18R5 and FP18R6 High frequency, high current power inductors Applications Multi-phase and Vcore regulators Voltage Regulator Modules (VRMs) and high power density
More informationDatasheet RS Pro AL Series Wire-wound SMD Inductor with a Ceramic Core, 4.7 nh ±0.1nH Wire-Wound 320mA Idc Q:13 RS Stock No:
Datasheet RS Pro AL Series Wire-wound SMD Inductor with a Ceramic Core, 4.7 nh ±0.1nH Wire-Wound 320mA Idc Q:13 RS Stock No: 763-1434 Product Details RS Pro SMD inductor offers an inductance of 4.7 nh
More informationMagnetic Products. Inductors Pulse Transformers Current Sensing Transformers Databus Isolators Common-Mode Chokes.
Magnetic Products Inductors Pulse Transformers Sensing Transformers Databus Isolators Common-Mode Chokes Magnetic Products Two essential elements of the vast majority of power electronics applications
More informationIMDFPSeries FEATURES APPLICATIONS. Wire Wound SMT Shielded Power Inductors (Miniature Size) TRIGON COMPONENTS IMDFP3010 M 4R7 T (1) (2) (3) (4)
CONFIGURATIONS: FEATURES Small size, low profile Miniature size for tiny portable DC to DC Converter line. Low DCR to provide low loss solution Higher efficiency due to the lower loss Customer design is
More informationSELECTION GUIDE. Order code B0303NXT-1W B0305NXT-1W B0309NXT-1W
B-NXT-1W 1W, FIXED INPUT, ISOLATED SINGLE OUTPUT SMD DC-DC CONVERTER FEATURES Footprint over pins 1.37cm 2 Short Circuit Protection(automatic recovery) I/O isolation voltage 1000VDC Operating Temperature:
More informationApproval sheet. WLCW1608HQ SMD Wire Wound Ceramic Chip Inductors (High Q) *Contents in this sheet are subject to change without prior notice.
WLCW1608HQ SMD Wire Wound Ceramic Chip Inductors (High Q) *Contents in this sheet are subject to change without prior notice. Page 1 of 7 ASC_WLCW1608HQ Series_V3.0 Jun. 2017 Features 1. Standard chip
More informationMultilayer Ferrite Chip Inductor
Features -Closed magnetic circuit avoids crosstalk -Suitable for high density installation and re-flow soldering -Sizes 0603 / 0805 / 1206 Construction Applications -Personal Computers -Portable Equipment
More informationWire Wound Chip Inductor-WB Series
Wire Wound Chip Inductor-WB Series Construction 4 1 3 1 Ceramic Core 3 Electrode (Ag/Pd+Ni+Sn) 2 Magnet Wire 4 UV Glue 2 Features -Ceramic base provide high -Ultra-compact inductors provide high Q factors
More informationChip Inductor. Power Inductor
Chip Inductor Type Style Features Series Page Thin Film Multilayer Thin Film Chip Inductor A 3 Multilayer Chip Inductor C 8 Multilayer Ferrite Chip Inductor M 13 Multilayer Chip Bead CB 19 Wire Wound Wire
More informationMTC K - CXX - X - E - XX
MTC Inductors - Radal type Applcaton Feld TVs and audo Telecommuncatons devce. Swtchng Power Supples. Buzzers and Alarm systems Other nose flters. Characterstcs: Inductance range : 1.0uH to 10000uH Current
More informationFIXED INDUCTORS FEATURES
FEATURES Extremely reliable inductors that are ideal for automatic insertion. Highly efficient automated production processes can provide high quality inductors in large volumes. Wide selection of configurations
More informationLow-Profile, Shielded Drum Core, Tapped Inductor SDT30 Series
Low-Profile, Shielded Drum Core, Tapped Inductor SDT0 Series SMD Device Description Halogen Free Approved for use with Maxim MAX45 chip set 5 C maximum total temperature operation. x. x.0mm shielded drum
More informationSELECTION GUIDE. Order code Voltage(VDC) NTE0303XMC NTE0305XMC
1W, FIXED INPUT, ISOLATED SINGLE OUTPUT SMD DC-DC CONVERTER FEATURES Footprint over pins 1.37cm 2 Short Circuit Protection(automatic recovery) I/O isolation voltage 1000VDC Operating Temperature: -40 ~+85
More informationSurface Mount Shielded Power Inductors
SCRB Series ( ------SCRB Applications( : Features( : 1, To be high saturation for surface mounting.( 2, Surface mount inductor with high current rating.( 3.Low resistance to keep power loss minimum.( 4,
More informationNXE1 Series Isolated 1W Single Output SM DC/DC Converters
NXE1 Series SELECTION GUIDE FEATURES Patents pending Lower Profile UL695 Recognition pending ANSI/AAMI ES661-1 Recognition pending 3kVDC Isolation Hi Pot Test Substrate Embedded Transformer Automated Manufacture
More informationRM 5 Core and Accessories
Core and Accessories Individual parts Part no. Page Adjusting screwdriver (for assembly only) B63399 204 Matching handle B63399 204 Adjusting screw B65539 B65806 204 Core B65805 98 Clamps B65806 20 Insulating
More informationSPECIFICATION FOR APPROVAL REF : A PAGE: 1 ABC'S DWG NO. ABC'S ITEM NO. Peak Temp:260 max. Max time above 200 :70sec max.
REF : 20080801- PGE: 1 Ⅰ. CONFIGURTION & DIMENSIONS: B C : 3.80±0.30 B : 3.80±0.30 C : 1.65±0.15 D : 1.30 typ. E : 1.20 typ. G : 1. ref. H : 4.30 ref. I : 1.60 ref. R : 1.30 ref. H D E D R I G I ( PCB
More informationFlat Coil Inductor Catalog. Electronics Division 2015 A0
Flat Coil Inductor Catalog Electronics Division 2015 A0 Index Mentech flat coil inductor provide exceptionally low and higher rated current.applications in telcom switches and routers,server,dc-dc converters,
More informationRecommended Applications AV equipment, Wireless communication equipment and various types of general electronic equipment.
4. High Power Type PF, PE, PC, PA, PB, LC, LA Features Low DCR and large current capability, suitable for power circuitry. Wire wound, resin molded chip inductor. (PC, PA, PB, LC, LA type) Unique Ceramic
More informationWire Wound Chip Inductor Ferrite
Applications: Features: Very strong solderability by flow soldering, soldering iron or wave soldering Highly accurate dimensions, can be mounted automatically Terminals are highly resistant to pull forces
More informationRoHS. 1 Ferrite core 3 Electrode (Ag/Pd+Ni+Sn) 2 Magnet wire 4 UV Glue
FEATURES Very strong solderability by flow soldering, soldering iron or wave soldering Highly accurate dimensions, can be mounted automatically Terminals are highly resistant to pull forces Highly resistant
More informationReference Only. Inductance Frequency (μh) Tolerance Typ Max (MHz min.) 85 *
P.1/10 CHIP COIL (CHIP INDUCTORS) LQM2HPN G0L REFERENCE SPECIFICATION 1. Scope This reference specification applies to LQM2HPN_G0 series, Chip Coil (Chip Inductors). 2. Part Numbering (ex) LQ M 2H P N
More informationChip Inductor. Power Inductor
Chip Inductor Type Style Features Series Page Thin Film Thin Film Chip Inductor A 3 Thin Film Common Mode Filter CMF 10 Multilayer Multilayer Chip Inductor C 14 Multilayer Ferrite Chip Inductor M 20 Multilayer
More informationWLFI1608 Ferrite Chip Inductors
WLFI1608 Ferrite Chip Inductors *Contents in this sheet are subject to change without prior notice. Page 1 of 7 ASC_ WLFI1608 Series_V1.0 July. 2015 FEATURES 1. General purpose chip ferrite power inductor
More informationPower Inductor SMT Type
SMD SERIES WIRE WOUND SMD CHIP INDUCTORS Applications :.DSC, DVC products..pcs.hard disk drives and computer peripherals..telecommunications devices..tv circuits..test equipment. Shape and Dimensions (Dimensions
More informationCoiltronics HCM1104 Series High current power inductors
Supersedes March 2012 Coiltronics High current power inductors Applications Voltage Regulator Module (VRM) Multi-phase regulators Point-of-load modules Desktop and server VRMs and EVRDs Base station equipment
More informationNPI Power Inductors. NPI W Series
FETURES HIGH URRENT, SMLL SIZE (UP TO 8.6 MPS) SURFE MOUNTLE ONSTRUTION HIGH INUTNE (UP TO 1000µH) TPE N REELE FOR UTOMTI INSERTION FOR USE IN / ONVERTERS HRTERISTIS ase Size NPI16W NPI31W NPI34W NPI52W
More informationReference Only. 1. Scope This reference specification applies to LQM2MPN_G0L series, Chip Coil (Chip Inductors).
Spec No. JELF243B-22L-1 P1/9 CHIP COIL (CHIP INDUCTORS) LQM2MPN GL REFERENCE SPECIFICATION 1. Scope This reference specification applies to LQM2MPN_GL series, Chip Coil (Chip Inductors). 2. Part Numbering
More informationWLFI2012 Ferrite Chip Inductors
WLFI2012 Ferrite Chip Inductors *Contents in this sheet are subject to change without prior notice. Page 1 of 7 ASC_ WLFI2012 Series_V1.0 July. 2015 FEATURES 1. General purpose chip ferrite power inductor
More informationNXJ2 Series Isolated 2W Single Output SM DC-DC Converters
NXJ2 Series SELECTION GUIDE FEATURES Patents pending Lower Profile UL69 Recognition pending ANSI/AAMI ES661-1, 2 MOOP, 1MOPP recognition pending 5.2kVDC Isolation Hi Pot Test Substrate Embedded Transformer
More informationNXE1 Series Isolated 1W Single Output SM DC-DC Converters
NXE1 Series SELECTION GUIDE Order Code 1 Nominal Input Voltage Output Voltage Input Current Output Current Load Regulation (Typ) Load Regulation (Max) Output Ripple & Noise (Typ) Output Ripple & Noise
More information