The ASPIAIG-F series of molded smd power inductors come in a variety of package sizes. The series supports current handling up TOLERANCE M: ±20%
|
|
|
- Marshall Lyons
- 6 years ago
- Views:
Transcription
1 SERIES DESCRIPTION The SPIIG-F series of molded smd power inductors come in a variety of package sizes. The series supports current handling up FETURES PPLICTIONS PPP ready and supported Excellent current handling up to 36 Soft saturation Shielded construction reduces EMI utomotive grade 1 and electric vehicles DS and body electronics Infotainment systems Lighting Motor control Solar inverters and solar power DC/DC converters in distributed power systems DC/DC converters for FPG (Field Programmable Gate rray) Battery powered device Thin type on-board power supply module for exchangers VRM (Voltage Regulator Module) for server converters Graphics card (Buck converters) OPTIONS ND PRT IDENTIFICTION - SPIIG-F SERIES # 4020 LR INDUCTNCE CODE Please refer to Electrical Spec Table TOLERNCE M: ± SERIES # 4020 LR PCKGING (T = TPE ND REEL) T: 3k pcs / reel T: 3k pcs / reel T: 3k pcs /reel T: 2k pcs /reel T: 1k pcs /reel T: 800 pcs /reel T: 2k pcs/reel T: 1.5k pcs/reel
2 ELECTRICL SPECIFICTIONS OPERTING TEMPERTURE -40 C C (including self-temperature rise) PRT NUMBER UNITS SYMBOL SPIIG-F4020-R10 SPIIG-F4020-R22 SPIIG-F4020-R36 SPIIG-F4020-R40 SPIIG-F4020-R56 SPIIG-F4020-R60 SPIIG-F4020-R72 SPIIG-F4020-1R0 SPIIG-F4020-1R2 SPIIG-F4020-1R5 SPIIG-F4020-1R8 SPIIG-F4020-2R2 SPIIG-FLR4020-R47 SPIIG-FLR4020-R68 SPIIG-FLR4020-R82 SPIIG-FLR4020-1R0 SPIIG-FLR4020-1R2 SPIIG-FLR4020-1R5 SPIIG-FLR4020-2R0 SPIIG-FLR4020-2R2 SPIIG-FLR4020-3R3 SPIIG-FLR4020-4R7 SPIIG-F5020-R15 SPIIG-F5020-R16 SPIIG-F5020-R33 SPIIG-F5020-R47 SPIIG-F5020-R56 SPIIG-F5020-R68 SPIIG-F5020-R80 SPIIG-F5020-R82 SPIIG-F5020-1R0 SPIIG-F5020-1R2 SPIIG-F5020-1R5 INDUCTNCE 0.1MHz/0.1V µh L TOLERNCE % M STORGE CONDITION -10 C C and R.H. 60%max DC RESISTNCE DCR STURTION CURRENT Isat TEMPERTURE RISE CURRENT Irms
3 ELECTRICL SPECIFICTIONS PRT NUMBER UNITS SYMBOL SPIIG-F5030-R15 SPIIG-F5030-R16 SPIIG-F5030-R33 SPIIG-F5030-R56 SPIIG-F5030-R60 SPIIG-F5030-R80 SPIIG-F5030-R82 SPIIG-F5030-1R0 SPIIG-F5030-1R2 SPIIG-F5030-1R5 SPIIG-F5030-1R8 SPIIG-F5030-2R2 SPIIG-F5030-3R3 SPIIG-F5030-4R7 SPIIG-F6050-1R0 SPIIG-F6050-1R2 SPIIG-F6050-1R5 SPIIG-F6050-1R8 SPIIG-F6050-2R2 SPIIG-F6050-3R3 SPIIG-F6050-4R3 SPIIG-F6050-4R7 PRT NUMBER UNITS SYMBOL SPIIG-F6030-R18 SPIIG-F6030-R33 SPIIG-F6030-R56 SPIIG-F6030-1R0 SPIIG-F6030-1R2 SPIIG-F6030-1R8 SPIIG-F6030-2R2 SPIIG-F6030-3R3 SPIIG-F6030-4R5 INDUCTNCE TOLERNCE 0.1MHz/0.1V µh L INDUCTNCE 0.1MHz/0.1V % M TOLERNCE % M L DC RESISTNCE DCR SELF-RESONNT FREQUENCY REF MHz SRF STURTION CURRENT Isat DC RESISTNCE DCR TEMPERTURE RISE CURRENT Irms STURTION CURRENT Isat TEMPERTURE RISE CURRENT Irms
4 ELECTRICL SPECIFICTIONS PRT NUMBER INDUCTNCE TOLERNCE 0.1MHz/0.1V UNITS SYMBOL SPIIG-F7020-R27 SPIIG-F7020-R31 SPIIG-F7020-R33 SPIIG-F7020-R47 SPIIG-F7020-R68 SPIIG-F7020-1R0 SPIIG-F7030-R60 SPIIG-F7030-1R0 SPIIG-F7030-1R5 SPIIG-F7030-2R2 SPIIG-F7030-3R3 SPIIG-F7030-4R7 SPIIG-F7030-5R6 SPIIG-F7030-6R8 SPIIG-F7030-8R2 % M L DC RESISTNCE DCR STURTION CURRENT Isat TEMPERTURE RISE CURRENT Irms D ±0.3 mm ELECTRICL CHRCTERISTICS SPIIG-F4020-R10 SPIIG-F4020-R22 SPIIG-F4020-R40 SPIIG-F4020-R56 SPIIG-F4020-R36 SPIIG-F4020-R60
5 ELECTRICL SPECIFICTIONS SPIIG-F4020-R72 SPIIG-F4020-1R0 SPIIG-F4020-1R5 SPIIG-F4020-1R8 SPIIG-FLR4020-R47 SPIIG-FLR4020-R68 SPIIG-FLR4020-1R0 SPIIG-FLR4020-1R2 SPIIG-F4020-1R2 SPIIG-F4020-2R2 SPIIG-FLR4020-R82 SPIIG-FLR4020-1R5
6 ELECTRICL CHRCTERISTICS SPIIG-FLR4020-2R0 SPIIG-FLR4020-2R2 SPIIG-FLR4020-3R3 SPIIG-FLR4020-4R7 SPIIG-F5020-R15 SPIIG-F5020-R16 SPIIG-F5020-R47 SPIIG-F5020-R47 SPIIG-F5020-R33 SPIIG-F5020-R68
7 ELECTRICL CHRCTERISTICS SPIIG-F5020-R80 SPIIG-F5020-R82 SPIIG-F5020-1R2 SPIIG-F5020-1R0 SPIIG-F5020-1R5 SPIIG-F5030-R15 SPIIG-F5030-R16 SPIIG-F5030-R56 SPIIG-F5030-R60 SPIIG-F5030-R33 SPIIG-F5030-R80
8 ELECTRICL CHRCTERISTICS SPIIG-F5030-R82 SPIIG-F5030-1R0 SPIIG-F5030-1R5 SPIIG-F5030-1R8 SPIIG-F5030-3R3 SPIIG-F5030-1R2 SPI-IGF5030-2R2 SPIIG-F5030-4R7 SPIIG-F6030-R18 SPIIG-F6030-R33 SPIIG-F6030-R56
9 ELECTRICL CHRCTERISTICS SPIIG-F6030-1R0 SPIIG-F6030-1R2 SPIIG-F6030-1R8 SPIIG-F6030-2R2 SPIIG-F6030-3R3 SPIIG-F6030-4R5 SPIIG-F6050-1R0 SPIIG-F6050-1R2 SPIIG-F6050-1R5 SPIIG-F6050-1R8 SPIIG-F6050-2R2 SPIIG-F6050-3R3
10 ELECTRICL CHRCTERISTICS SPIIG-F6050-4R3 SPIIG-F6050-4R7 SPIIG-F7020-R27 SPIIG-F7020-R31 SPIIG-F7020-R33 SPIIG-F7020-R47 SPIIG-F7020-R68 SPIIG-F7020-1R0 SPIIG-F7030-R60 SPIIG-F7030-1R0 SPIIG-F7030-1R5
11 ELECTRICL SPECIFICTIONS SPIIG-F7030-2R2 SPIIG-F7030-3R3 SPIIG-F7030-5R6 SPIIG-F7030-4R7 SPIIG-F7030-6R8 SPIIG-F7030-8R2 MECHNICL DIMENSIONS Dimension: mm SERIES SPIIG-F4020 SPIIG-FLR4020 SPIIG-F5020 SPIIG-F5030 SPIIG-F6030 SPIIG-F6050 SPIIG-F ± ± ± ± ± ± ± 0.25 B 4.1 ± ± ± ± ± ± ± 0.2 C 1.9 ± ± ± ± ± ± ± 0.2 D 3.4 ± ± ± ± ± ± 0.3 SEE SPEC TBLE E 0.88 ± ± ± ± ± ± ± 0.2 SPIIG-F ± ± ± 0.2 SEE SPEC TBLE 1.75 ± 0.2 F 1.6 ± ± ± ± ± ± ± ± 0.25 SERIES SPIIG-F4020 SPIIG-FLR4020 SPIIG-F5020 SPIIG-F5030 SPIIG-F6030 SPIIG-F6050 SPIIG-F7020 SPIIG-F7030 L typ G typ H typ
12 REFLOW Zone Description 1 Preheat Temperature TSMIN ~ TS 150 C ~ 180 C TL 217 C TP 245 C 2 3 Peak heat Times 120 ~ 180 sec. 60 ~ 150 sec. 5 sec. PCKING (TPE & REEL) SERIES SPIIG-F4020 SPIIG-FLR4020 SPIIG-F5020 SPIIG-F5030 SPIIG-F6030 SPIIG-F6050 SPIIG-F7020 SPIIG-F7030 W 12.0± ± ± ± ± ± ± ±0.3 F 5.5± ± ± ± ± ± ± ±0.1 P 8.0± ± ± ± ± ± ± ±0.1 D 0 4.4± ± ± ± ± ± ± ±0.1 B0 4.4 ± ± ± ± ± ± ± ±0.1 T 0.35± ± ± ± ± ± ± ±0.1 SERIES B SPIIG-F4020 SPIIG-FLR / ± 2 SPIIG-F5020 SPIIG-F5030 SPIIG-F6030 SPIIG-F / ± 2 SPIIG-F7020 SPIIG-F7030 Dimension: mm K0 2.3± ± ± ± ± ± ± ±0.1 C D +0.5/ /
COMPACT SHIELDED SMD POWER INDUCTOR FOR AUTOMOTIVE
FEATURES APPLICATIONS High reliability wire-wound construction Shielded construction reduces EMI Automotive grade power inductor TS-16949 qualified production PPAP level 3 support AEC-Q200 qualified with
COMPACT SHIELDED SMD POWER INDUCTOR FOR AUTOMOTIVE
FEATURES APPLICATIONS Low profile 3mm height for compact applications Advanced and high reliability wire-wound construction Shielded construction reduces EMI Automotive grade power inductor TS-16949 qualified
Iron Powder Core SMD Power Inductors
Iron powder core inductors feature a homogeneous construction, exhibiting low loss and reduced inductance drop due to applied current, allowing for higher current ratings in low profile packages. PRODUCT
Vishay Dale Inductors
IM Inductors Military, MIL-C- ualified, Type LT and Commercial, Molded FETURES Wide inductance range in small package. Flame retardant coating. Precision performance, excellent reliability, sturdy construction.
Power Inductors. Type 3622 Series. Type 3622 Series. Electrical Characteristics A Series. Key Features
The 3622 Series is an innovative design for a high power SMD choke. It combines Tyco quality with low price and high long-term reliability. The layout and profile make it a highly appropriate component
74 ( ) 127 ( ) A [0,315] 2,20 [0,079] [0,087] 1,60 [0,063] Land Pattern
![74 ( ) 127 ( ) A [0,315] 2,20 [0,079] [0,087] 1,60 [0,063] Land Pattern](/thumbs/85/91716071.jpg "74 ( ) 127 ( ) A [0,315] 2,20 [0,079] [0,087] 1,60 [0,063] Land Pattern")
A FEATURES Shielded Construction with very low DCR Heating Current rating up to 17.9 Amps Saturation Current rating up to 7.5 Amps (based on only 10% inductance drop) Inductance up to 1mH for all case
SMD Power Inductors. Type 3624 Series. Type 3624 Series. Electrical Characteristics A Series. Environmental Characteristics A Series
The 3624 series unique design allows for a range of products which give not only a high current rating, but minimizes the board space required for this product. Tyco Sigma quality, matched with reliability
2R2. Design Code Design Code M ±20%
Wire Wound SMD Power Inductors WPN Series Operating Temp. : -40 ~+125 (Including self-heating) FEATURES Fe base metal material core provides large saturation current Metallization on ferrite core results
High Current Power Inductors HCM1104 Series
High Current Power Inductors HCM1104 Series HALOGEN HF FREE Pb SMD Device Description Halogen free, lead free, RoHS compliant 125 C maximum total operating temperature 11.5x 10.3 x 4.0mm maximum surface
Power Inductors - RFB Series
Document 277-1 Power Inductors - RFB Series These low cost power inductors offer a wide range of inductance values, from 2.2 µh to 18 mh. They have an open magnetic construction that gives them high current
SMD POWER INDUCTORS SELECTION GUIDE
SMD POWER INDUCTORS SELECTION GUIDE Unshielded Inductor Type Item Type Dimension (mm) Inductance (uh) Isat (A) Lead Free P/N. DA SERIES DA42 4.0 4.5 3.0 1.0 ~ 68 0.30 ~ 2.18 DA42NP DA43 4.0 4.5 3.5 1.0
High Current Power Inductors HCM1104 Series
High Current Power Inductors HCM1104 Series HALOGEN HF FREE Pb SMD Device Description Halogen free, lead free, RoHS compliant 125 C maximum total operating temperature 11.5x 10.3 x 4.0mm maximum surface
SPECIFICATION FOR APPROVAL INDEX
SPECIFICATION FOR APPROVAL INDEX COVER PAGE INDEX. 0 SHAPES & DIMENSION. 1 PART NUMBER CODE 2 PRODUCT DETAIL 3-5 REEL DIMENSIONS 6 REEL PACKAGING QUANTITY 6 RELIABILITY TEST AND CONDITIONS 7 RECOMMENDED
SRP1238A Series - Shielded Power Inductors
*RoHS and AEC-Q COMPLIANT Features Shielded construction Carbonyl powder core High saturation current Inductance range:.1 to 1 µh AEC-Q compliant RoHS compliant* and halogen free** SRP1A Series - Shielded
2R2. 4 Nominal Inductance Packing Tape & Reel. Design Code M ±20%
Wire Wound SMD Power Inductors WPN Series Operating temperature range : -40 ~+125 (Including self-heating) FEATURES Fe base metal material core provides large saturation current Metallization on ferrite
2R2. Design Code M ±20%
Wire Wound SMD Power Inductors WPN Series Operating Temp. : -40 ~+125 (Including self-heating) FEATURES Fe base metal material core provides large saturation current Metallization on ferrite core results
Power Inductors RFB Series
Document 277-1 Power Inductors RFB Series Low cost, high current power inductors 2.2 µh to 18 mh inductance range 500 V isolation from winding to core. RFB0810 and RFB1010 have a flame retardant polyolefin
High Current, High Frequency Power Inductors HCM1103 Series
High Current, High Frequency Power Inductors HCM1103 Series HALOGEN HF FREE Pb Description Halogen free, lead free, RoHS compliant 125 C maximum total temperature operation 11.5 x 10.3 x 3.0mm maximum
Wire Wound Chip Inductor (Ferrite)
FEATURES Very strong solderability by reflow soldering, soldering iron or wave soldering Highly accurate dimensions Automated mounting capable Terminals are highly resistant to pull forces Highly resistant
P7604 Family SHIELDED POWER INDUCTOR PRODUCT DATA SHEET
PRODUCT DATA SHEET SHIELDED POWER INDUCTOR P7604 Family Features Magnetic Shielding High Current (to 5A) Low DCR (to 20mΩ) Low profile (3-7mm) Surface Mount Flat top for pick & place Pb-free Applications
SMT Shielded Power Inductors IDM6025, IDM6028, IDM6045, IDM7032, IDM7045, IDM7055, IDM10145, IDM12555, IDM12565, IDM12575, IDM6028.
SMT Shielded Power s IDM6025, IDM6028, IDM6045, IDM7032, IDM7045, IDM7055, IDM10145, IDM12555, IDM12565, IDM12575, IDM6028 Configurations: FEATURES Magnetically shielded construction. Compact and thin.
Power Inductor. Non-shielded. PDH Series 2. PD Series 4. PCD Series 7. Packaging Info 10 Environmental Specifications 12
Power Inductor Non-shielded PDH Series 2 PD Series 4 PCD Series 7 Packaging Info 10 Environmental Specifications 12 Tel: 1-888-734-7347 Fax: 919-850-9504 E-mail marketing@seielect.com http://www.seielect.com
NPI Power Inductors. NPI W Series
FETURES HIGH URRENT, SMLL SIZE (UP TO 8.6 MPS) SURFE MOUNTLE ONSTRUTION HIGH INUTNE (UP TO 1000µH) TPE N REELE FOR UTOMTI INSERTION FOR USE IN / ONVERTERS HRTERISTIS ase Size NPI16W NPI31W NPI34W NPI52W
Catalogue For Metal Alloy Inductor
Catalogue For Metal Alloy Inductor Features A coil embedded inductor with magnetic metal alloy powder. Shielded construction. Superior DC current characteristics, suitable for large current application.
High Power Thin Film Chip Resistors
FETURES IMPROVE POWER RTING (HIGHER THN NTR SERIES) PRECISE TOLERNCE N TEMPERTURE COEFFICIENT EI STNR CSE SIZES (0603 ~ 2512) LOW NOISE, THIN FILM (NiCr) CONSTRUCTION REFLOW SOLERLE (Pb FREE TERMINTION
TYPE A B C D A B C BPSC ± ± BPSC ± ±
SMD Shielded Power Inductors Series Series Features RoHS, Halogen Free and REACH Compliance Magnetic shielded Various package size and wide inductance range Applications AP Routers STBs LCD TVs and monitors
INPAQ Global RF/Component Solutions
WIP252012Q ZF Series Specification Product Name Series Power Inductor WIP252012Q ZF Series Size EIAJ 2520 WIP252012Q ZF Series Engineering Specification 1. Feature This specification applies Low Profile
SMT T SERIES SURFACE MOUNT TINY SWITCHES Distinctive features
Distinctive features ENTIRELY DESIGNED FOR SURFCE MOUNT Surface mount devices (SMD) are subjected to more stringent constraints of temperature, solderability and space savings than through-hole components.
Shielded SMD Power Inductor
PCDR 0728 / 0730 / 0732 / 0745 / 1045 PCDR 0628 / 1255 / 1265 / 1275 Features Dimensions Unit:mm -Compact, low profile with low DCR and large current -With magnetically shielded against radiation -Flat
SPECIFICATION FOR APPROVAL
PGE: 1 Ⅰ. CONFIGURTION & DIMENSIONS: Marking Dot is start winding & Inductance code 101 : 5.6±0.2 B : 4.5±0.3 C : 2.3 ref. D : 5.8 ref. E : 6.0 ref. F : 1.7 ref. B C D F E ( PCB Pattern ) Ⅱ. SCHEMTIC DIGRM:
Japan. ND (Size 2012) (Size 1608) Non winding (RF, 1E) and wire wound type chip inductors for automatic mounting and high-density mounting
Chip Inductors Japan Series: Chip Type: RF, NC, FA, PE, EA RE, ND, NA, FC, FB, SA, PC, PA, RF (Size 5) 1E (Size 1608) ND (Size 2012) 1C (Size 2520) 1A (Size 3225) FB (Size 4532) Non winding (RF, 1E) and
SPECIFICATION FOR APPROVAL REF : A PAGE: 1 ABC'S DWG NO. ABC'S ITEM NO. Peak Temp:260 max. Max time above 200 :70sec max.
REF : 20080801- PGE: 1 Ⅰ. CONFIGURTION & DIMENSIONS: B C : 3.80±0.30 B : 3.80±0.30 C : 1.65±0.15 D : 1.30 typ. E : 1.20 typ. G : 1. ref. H : 4.30 ref. I : 1.60 ref. R : 1.30 ref. H D E D R I G I ( PCB
Coiltronics HCM0703 Series High current power inductors
Supersedes September, 2010 Coiltronics HCM0703 Series High current power inductors Applications Voltage Regulator Module (VRM) Multi-phase regulators Point-of-load modules Desktop and server VRMs and EVRDs
Flat Coil Inductor Catalog. Electronics Division 2015 A0
Flat Coil Inductor Catalog Electronics Division 2015 A0 Index Mentech flat coil inductor provide exceptionally low and higher rated current.applications in telcom switches and routers,server,dc-dc converters,
SCDS Series. Shielded SMD Power Inductors. Features
YAGEO CORPORATION SMD INDUCTOR / BEADS Series Shielded SMD Power Inductors Applications Power Supply for VTRs OA Equipment LCD Televisions Notebook PCs Portable Communication Equipment DC / DC Converters,
FrelTec GmbH. SMD Power Inductors
GmbH Mathildenstr. 10A 82319 Starnberg Germany 10/12/2011 1/13 GmbH www.freltec.com SPECIFICATION Part Number 107 252010 * G * 100 * M E02 * Type Size Use Value Packing 107 : SMD Power Inductor 252010:
Coiltronics HCM1104 Series High current power inductors
Supersedes March 2012 Coiltronics High current power inductors Applications Voltage Regulator Module (VRM) Multi-phase regulators Point-of-load modules Desktop and server VRMs and EVRDs Base station equipment
Multi-Layer Power Inductors (IP Series)
Multi-Layer Power Inductors (IP Series) For DC/DC Converter Application ORDERING CODE IP R M P S 9 PRODUCT CODE IP : Multilayer Power Inductor (Lead Free) DIMENSION (L X W) Code Dimension EIA. x. mm. X.
SMD Power Inductor SR0602/SR0603/SR0604 SR0805/SR1006/SR1011/SR1307 Series
SMD Power Inductor SR0602/SR0603/SR0604 SR0805/SR1006/SR1011/SR17 Series CONFIGURATION & DIMENSIONS(m/m) 101 A A FEATURES Excellent solderability and high heat resistance Excellent terminal strength construction
(mω) 1. Temperature ( C) Voltage (V) ULRG1 /
Resistors Metl Strip Current Sense Resistors Surfce Mount Metl Element Current Metl Element Sense Resistor UR Series UR Current Series Sense Resistor Mke Possible Resistnce R0005 (m ) to R015 (15m ) Metl
Power Inductor. Shielded. PS Series 2. PCS Series 4. PCDR Series 7. PCDS Series. SCDS Series 12. Packaging Info 14. Environmental Specifications
Power Inductor Shielded PS Series 2 PCS Series 4 PCDR Series 7 PCDS Series 10 SCDS Series 12 Packaging Info 14 Environmental Specifications 16 Tel: 1-888-734-7347 Fax: 919-850-9504 E-mail marketing@seielect.com
SPECIFICATION FOR APPROVAL
PGE: 1 Ⅰ. CONFIGURTION & DIMENSIONS: Marking D C : 12.0±0.3 m/m : 12.0±0.3 m/m C : 8.0 max m/m D : E : 5.0 typ. 5.7 typ. m/m m/m F : 4.5 ref. m/m G : 5.5 ref. m/m H : 4.0 ref. m/m G H E F H Ⅱ. SCHEMTIC
SMD High Frequency Inductors. Characteristics Electrical Q min 100 Hz. Q Typical 800 MHz H1N2S
Type 3671 Series Key Features Frequency to 10GHz Four sizes available Supplied on tape Available via distribution Applications Cellular phones WLAN High Speed Communication Devices TE Connectivity is pleased
Power Inductor DIP Type
In EC TYPE series color band are marked for identification. These bands indicate inductance value and tolerance. For values below 0.1uH, Gold indicates the decimal point and the next three bands indicate
Recommended Applications AV equipment, Wireless communication equipment and various types of general electronic equipment.
4. High Power Type PF, PE, PC, PA, PB, LC, LA Features Low DCR and large current capability, suitable for power circuitry. Wire wound, resin molded chip inductor. (PC, PA, PB, LC, LA type) Unique Ceramic
MPI2520 High Current, Low Profile, Miniature Power Inductors HALOGEN FREE
Technical Data 10199 MPI2520 High Current, Low Profile, Product description: Pb Halogen free, lead free, RoHS compliant 125 C maximum total temperature operation 2.7 x 2.2 x 1.0 / 1.2mm maximum surface
Low-Profile, Shielded Drum Core, Tapped Inductor SDT30 Series
Low-Profile, Shielded Drum Core, Tapped Inductor SDT0 Series SMD Device Description Halogen Free Approved for use with Maxim MAX45 chip set 5 C maximum total temperature operation. x. x.0mm shielded drum
Shielded SMD Power Inductor
PCS62B / 64B PCS73 / 74 Features 1.5 -High power, High saturation inductors -With magnetically shielded against radiation 5.0 -Directly connected electrode on ferrite core -Highly accurate dimensions for
Power Inductor SMT Type
UPI F SRIS ULTRA HIGH CURRNT SMT POWR INDUCTOR. Applications:.PDA/Notebook/Desktop, and server applications..dc/dc converters in distributed power systems..dc/dc converter for Field Prograable Gate Array(FPGA).
This specification applies to the Pb Free high current type SMD inductors for
SCOPE: This specification applies to the Pb Free high current type SMD inductors for Warn : This product series can t be used in synchronous rectification circuit that is over 24V. PRODUCT INDENTIFICATION
Multilayer Chip Inductor-CL Series
Multilayer Chip Inductor-CL Series Construction A L 5 4 T 1 3 2 W 1 Ceramic Material 3 Inner Electrode (Ag) 5 Direction Mark 2 Through Hole 4 End-termination (Ag/Ni/Sn) Features -A ceramic material construction
FP1008R5 and FP1008R6 High frequency, high current power inductors
Technical Data 152 Effective April 217 FP18R5 and FP18R6 High frequency, high current power inductors Applications Multi-phase and Vcore regulators Voltage Regulator Modules (VRMs) and high power density
Power Inductors (IP Series)
Multi-Layer Power Inductors (IP Series) ORDERING CODE... 1 Standard External Dimensions... 2 Power Inductor for Choke (L Type)... 3 Power Inductor for DC/DC converter (S Type)... 4 Testing Condition &
Japan China. Recommended Applications AV equipment, Wireless communication equipment and various general electronic equipment.
4. High Power Type PF, PC, PA, PB Japan China Features Low DCR and large current, suitable for power circuit. Wire wound and resin molded chip inductor. (PC, PA, PB type) Non wound structure using unique
Recommended Applications AV equipment, Wireless communication equipment and various types of general electronic equipment.
4. High Power Type PF, PE, PC, PA, PB Features Low DCR and large current capability, suitable for power circuitry. Wire wound, resin molded chip inductor. (PC, PA, PB types) Unique Ceramic Core/Laser-cut
Multi-Layer Power Inductors (IP_L Series)
Multi-Layer Power Inductors (IP_L Series) For Choke Application ORDERING CODE IP 2012 2R2 M P L 9 PRODUCT CODE IP : Multilayer Power Inductor (Lead Free) DIMENSION (L X W) Code Dimension EIA 1608 1.6 x
RF Type 5 (0402) 0.2± ± ± ±0.05 Standard Packing uantity 00 pcs./reel Standard Parts (E12 series) 0.5± to to
1. High Frequency Use (Non Magnetic Core) RF, RE, ND, NC, NA Features High frequency capability due to its non magnetic core. Capable of being Re-fl ow or fl ow soldered. Wide line-up from 5 to 3225 case
*See Part Number System for Details SPECIFICATIONS. Case Dimensions Type Case Size P 2 NFCC04
FETURES RECTNGULR PCKGE ITH METL STRIP FUSE ELEMENT EI SIZES 42, 63, 85 ND 126 CURRENT RTINGS FROM.2 ~ 5. MPS SFETY STNDRD PPROVL (UL and c-ul File Number E32168) Pb-FREE COMPTILE ITH FLO ND REFLO SOLDERING
Wire Wound Chip Inductors Ferrite SMD
GmbH Mathildenstr. 10A 82319 Starnberg Germany Wire Wound Chip Inductors Ferrite SMD 5/10/2018 1/13 GmbH www.freltec.com SPECIFICATION Part Number 095 05 * 101 * J * E02 _ * Type Size Value Packing Current
INDUCTORS SMD POWER INDUCTORS SMD
INDUCTORS, COIS, FITERS & FERRITES INDUCTORS SMD POWER INDUCTORS SMD K AND CK SERIES STANDARD MUTIAYER INDUCTORS Features: Internal printed coil structure that creates a closed magnetic circuit which acts
Extended InGaAs Photodiodes IG26-Series
Description The IG26-series is pnchromtic PIN photodiode with nominl wvelength cut-off t 2.6 µm. This series hs been designed for demnding spectroscopic nd rdiometric pplictions. It offers excellent shunt
ABC'S DWG NO. ABC'S ITEM NO. m/m Marking. Peak Temp:260 max. Max time above 230 :50sec max. Max time above 200 :70sec max. Temperature Rising Area
PGE: 1 Ⅰ. CONFIGURTION & DIMENSIONS: : 5.6±0.2 Marking Dot is start winding & Inductance code 101 B : 4.5±0.3 C : 2.3 ref. D : 5.8 ref. E : 6.0 ref. F : 1.7 ref. B C D F E ( PCB Pattern ) Ⅱ. SCHEMTIC DIGRM:
QM10HA-HB MEDIUM POWER SWITCHING USE
MITSUBISHI TRNSISTOR MODULES IC Collector current... CEX Collector-emitter voltage... 6 hfe current gain... Insulated Type UL Recognized Yellow Card No. E86 (N) File No. E81 PPLICTION C motor controllers,
RJ45 SINGLE PORT 100/1000/2.5G/5G BASE-T MAGNETICS
SERIES DESCRIPTION The series of RJ45 jacks with internal magnetics supports a wide range of configurations in 10/100Base-T, 1000Base-T, 2.5GBase-T and 5GBase-T applications. This series offers the ability
CONTENT Ferrites for cable assembly
www.schmid-m.com EMC & Inductors CONTENT Ferrites for cable assembly Round cable snap ferrites SMLF Flat Ferrite with Clip SRPS Flat Ferrite Cores SRP Toroidal Cores ST Axial Ferrite Beads SRH Ferrite
Wirewound Resistor, Industrial High Power, Vitreous Tubular, Adjustable, Low Values 0.12 to 560
Wirewound Resistor, Industrial High Power, Vitreous Tubular, djustable, Low Values to 560 FETURES High power rating: 16 W to 600 W at 25 C Heavy overloads 10 P n 15 s 1 % Low ohmic values 0.10 available
SPECIFICATION FOR APPROVAL
MGIC SPECIFICTION FOR PPROVL CUSTOMER : VENDOR : MGIC TECHNOLOGY CO.,LTD. PRODUCTS : Shielded Molding - SMD PRT NO : WSRPG0603-R33M-G CUST NO : DTE : 2013.01.22 SLES DEP. : E-MIL : PURCHSER CONFIRMED PPROVL
EP Series Sealed Tiny Pushbutton Switches
Features/Benefits Sealed against solder & cleaning processes Thru-hole and surface mount models Snap-fitting actuator accepts standard caps Tape & reel packaging available RoHS compliant models available
EP Series Sealed Tiny Pushbutton Switches
Sealed Tiny Switches Features/Benefits Sealed against solder & cleaning processes Thru-hole and surface mount models Snap-fitting actuator accepts standard caps Tape & reel packaging available RoHS compliant
Approval sheet. WLCM0603 WLCM1005 Multi-Layer Ceramic High Frequency Inductors. *Contents in this sheet are subject to change without prior notice.
WLCM0603 WLCM1005 Multi-Layer Ceramic High Frequency Inductors *Contents in this sheet are subject to change without prior notice. Page 1 of 11 ASC_WLCM Series_V7.0 Jul. 2017 FEATURES 1. Ceramic structure
NS6A5.0AFT3G, SZNS6A5.0AFT3G Series. 500 Watt Peak Power Zener Transient Voltage Suppressors. Unidirectional
OBSOLETE/EOL NS65.0FT3G, SZNS65.0FT3G Series DTE June/30/2018 PCN/ECN# LFPCN41246 REPLCED BY SM6L Series 500 Watt Peak Power Zener Transient Voltage Suppressors Littelfuse.com Unidirectional The NS6xxFT3G
Product Specification 12010E00 EQUALIZER AND 12010C00 CONVERTER, 12V TO 24V FAMILY
001 4178 PRODUCTION RELESE 8/5/04 BF 4583 DD PIN DETIL TO PGE 8 7/15/05 BF Product Specification 12010E00 EQULIZER ND 12010C00 CONVERTER, 12V TO 24V FMILY PROPRIETRY THIS DRWING IS THE PROPERTY OF SURE
Gas Discharge Tubes SL1002A Series
SL12A Series SL12A Series RoHS Agency Approvals AGENCY AGENCY FILE NUMBER E128662 2 Electrode GDT Graphical Symbol Additional Information Description The Broadband Optimized SL12A series has been especially
EP Series Sealed Tiny Pushbutton Switches
Features/Benefits Sealed against solder & cleaning processes Thru-hole and surface mount models Snap-fitting actuator accepts standard caps Tape & reel packaging available RoHS compliant models available
SRP7030F Series - Shielded Power Inductors
*RoHS COMPLIANT 8R2 Features Shielded construction Flat wire Unit height as low as 3. mm Inductance range:.1 to 1 μh Rated current up to 32 A RoHS compliant* This series is currently available but not
Content (RF Inductors) Multi-Layer High Frequency Inductors (IQ & HI Series) Cautions... 18
Content (RF Inductors) Multi-Layer High Inductors (IQ & HI Series)... 2 Ordering Code... 2 Standard External Dimensions... 3 High Q Type (IQ Series)... 4 Standard Type (HI Series)... 5 Testing Condition
BATTERY DISCONNECT UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN INCHES [MM]
![BATTERY DISCONNECT UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN INCHES [MM]](/thumbs/83/88584280.jpg "BATTERY DISCONNECT UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN INCHES [MM]")
ISIONS DESCRIPTION DTE BY 366 PRODUCTION RELESE 8/2/02 BF 002 3698 LOWER INPUT IMPEDNCE LEVEL 9/19/02 BF 003 4688 DD CONFORML COTING 1/23/06 BF 004 48 DD HETSHRINK TO TERMINL POST //06 BF 5303 UPDTE I
SPECIFICATION FOR APPROVAL
SPEIFITION FOR PPROVL Ⅰ. onfiguration and dimensions: 'S W NO. S0704 F - REV. 20130727- PE 1 1R0 E F (P Pattern) Unit:m/m 7.30 ±0.2 7.30 ±0.2 4. ±0.2 2.00 typ. E 4.60 typ. F 4.80 ref. 2.40 ref. 1. ref.
(1) SHAPES AND DIMENSIONS
Ⅰ. SCOPE: This specification applies to the Pb Free high current type SMD inductors for PRODUCT INDENTIFICATION MSI - 100807 - R12 M 1 2 3 4 1 Product Code 2 Dimensions Code 3 Inductance Code 4 Tolerance
Gas Discharge Tube (GDT) Products CG/CG2 Series. CG/CG2 Series
Description Littelfuse highly reliable GDTs provide a high degree of surge protection in a small size ideal for board level circuit protection. GDTs function as switches which dissipate a minimum amount
3-Way Ball Valve Assemblies Using TAC DuraDrive Actuators
3-Wy Bll Vlve Assemblies Using TAC DurDrive Actutors Note: All vlve sizes ANSI Clss IV (0.01% of C v ) shut off, piped coil-side outlet to A. Tble-5 Selection Chrt3-Wy Mixing Bll Vlve Assemblies with TAC
PTC Thermistor:TPM-S Series
Features 1. RoHS & Halogen-free compliant 2. Thermistor chip with lead-free tinned terminals 3. EIA size 0402,0603,0805 4. Fast and reliable response 5. Suitable for reflow soldering 6. Agency Recognition:
P3IC / P3ICP. Datenblatt. Absolute pressure transducer. Industrial Class" Special features. Dimensions (in mm) B en
P3IC / P3ICP Absolute pressure trnsducer Industril Clss" Dtenbltt Specil fetures For sttic nd dynmic pressure vrince, pressure peks nd pressure oscilltions Nominl (rted) pressure 10 br to 3000 br Strin
JS Series Sub-Miniature Slide Switches
Su-Miniture Switches Fetures/enefits Positive detent Low profile IR reflow to 60º solder profile Surfce nd thru hole mounting, DPDT, DPT models RoHS complint Typicl pplictions Telecommuniction products
Datasheet RS Pro AL Series Wire-wound SMD Inductor with a Ceramic Core, 4.7 nh ±0.1nH Wire-Wound 320mA Idc Q:13 RS Stock No:
Datasheet RS Pro AL Series Wire-wound SMD Inductor with a Ceramic Core, 4.7 nh ±0.1nH Wire-Wound 320mA Idc Q:13 RS Stock No: 763-1434 Product Details RS Pro SMD inductor offers an inductance of 4.7 nh
No. Test Requirement Test Condition Test Reference. 10 cycles
*RoHS COMPLIANT & **HALOGEN FREE SinglFuse SF-1210SxxxW Series Features n Single blow fuse for overcurrent protection n 3225 (EIA 1210) footprint n Slow blow fuse n UL 248-14 listed n RoHS compliant* and
Surface Mount Fuses 0603Size> Fast Acting > S0603-F Series
Page:1 of 6 General Fast Acting 1.6mm 0.8mm physical size Thick film manufacturing method, ceramic substrate, silver fusing element -50 ~125 operating temperature Excellent environmental integrity RoHS
SIDACtor Protection Thyristors Baseband Protection (Voice-DS1) SIDACtor Series - DO-214 E Description
SIDACtor Series - DO-214 RoHS Pb e3 Description SIDACtor Series DO-214AA are designed to protect baseband equipment such as modems, line cards, CPE and DSL from damaging overvoltage transients. The series
P7609 Family POWER INDUCTOR PRODUCT DATA SHEET
PRODUCT DATA SHEET POWER INDUCTOR P7609 Family Features Current to 3.8A Low DCR (to 30mΩ) Low profile (to 2.2mm) Surface Mount Flat top for pick & place Electroplated terminals Applications DC-DC Converters
Wire Wound Chip Inductor (Ferrite)-NL Series
Wire Wound Chip Inductor (Ferrite)-NL Series Construction Molding Type 1 2 3 4 1 Molded resin 3 Ferrite core 2 Electrode (Ag) 4 Magnet wire Open Type 4 1 3 2 1 Ferrite core 3 Electrode (Ag/Pd+Ni+Sn) 2
WLFI1608 Ferrite Chip Inductors
WLFI1608 Ferrite Chip Inductors *Contents in this sheet are subject to change without prior notice. Page 1 of 7 ASC_ WLFI1608 Series_V1.0 July. 2015 FEATURES 1. General purpose chip ferrite power inductor
Surface Mount Fuses 0603Size> Slow Blow> S0603-S-5.0A
Page: 1 of 6 General Slow Blow 1.6mm 0.8mm physical size Thick film manufacturing method, ceramic substrate, silver fusing element -50 ~125 operating temperature Excellent environmental integrity RoHS
Surface Mount Fuses 0603Size> Slow Blow> S0603-S Series
Revision:F Page:1 of 6 General Slow Blow 1.6mm 0.8mm physical size Thick film manufacturing method, ceramic substrate, silver fusing element -50 ~125 operating temperature Excellent environmental integrity
TA25DU0.4 Overload Relay a. Features. Descriptions
3804 South Street 7594-723, TX Ncogdoches Phone: 93-59-7941 Fx: 93-50-485 0.4 Overlod Rely-0.25 0.4 Thoms&Betts-Abb Ins Prod Ctlog Number Mnufcturer Description Weight per unit Product Ctegory Fetures
Power Inductor DIP Type
PK SERIES PEAKING COIS. Applications:.TVs and Audio equipment..telecommunication devices..personal computer..switching Power Supply..Other noise filter. Shape and Dimensions(Dimensions are in mm) : Item
Molded Chip Wirewound Inductors
FEATURES EIA SIZES A (1210), B (1812), C (1008) AND D (0805) EXCELLENT HIGH Q AND HIGH CHARACTERISTICS BOTH FLOW AND REFLOW SOLDERING APPLICABLE HIGH INDUCTANCE AVAILABLE IN SMALL SIZE EMBOSSED PLASTIC
ChipLead Technology VAS A USB/Adapter Switching Charger. Features. General Description. Applications
2.5A USB/Adapter Switching Charger General Description The is a highly-integrated switch-mode battery charge management device for 1 cell Li-Ion and Li-polymer batteries in a wide range of tablet and other
WLPM Series SMD Molded Power Inductors
WLPM545230 Series SMD Molded Power Inductors *Contents in this sheet are subject to change without prior notice. Page 1 of 7 ASC_WLPM545230 Series_V3.0 June. 2015 FEATURES 1. Shielded construction. 2.
n For use in telecommunication circuit applications requiring low current protection with high surge tolerance
*RoHS COMPLIANT & **HALOGEN FREE 0.5 SinglFuse SF-3812TM-T Series Features n Replacement for Bourns Telefuse models B0500T, B1250T and B2000T n For use in telecommunication circuit applications requiring
P3IC / P3ICP. Datenblatt. Absolute pressure transducer. Industrial Class. Special features. Dimensions (in mm) B en 1
P3IC / P3ICP Absolute pressure trnsducer Industril Clss Dtenbltt Specil fetures - For sttic nd dynmic pressure vrince, pressure peks nd pressure oscilltions - Nominl (rted) pressure 10 br to 3000 br -