Flat Coil Inductor Catalog. Electronics Division 2015 A0
|
|
- Jade Bradford
- 6 years ago
- Views:
Transcription
1 Flat Coil Inductor Catalog Electronics Division 2015 A0
2 Index Mentech flat coil inductor provide exceptionally low and higher rated current.applications in telcom switches and routers,server,dc-dc converters, high current NPUsin networking equipments,point of load converters, graphics cards, multi-phasevoltage regulator Index 1 Product Catalogue 2 Datasheet /2015
3 Part No. PIC Size () L W H (m Ω) (g) MHW1807SG4R0K MHW2007SG7R0K EIR20-009SG EIR20-019SG EIR20-015SG MHW2610SG230K EER25-003SG EIR30-011SG MCEP125SG1R0M MHW1306SG1R0M MHW1206SGR40M MHW2617SG100K /2015
4 MHW1807SG4R0K Flat wire windings provide exceptionally low 3.5±0.3 9± ±1 18.2± MAX 8.5MAX 13±0.4 MHW1807SG4R0K ± ± ± ± Operating temperature rang -40 to pcs per reel 9.0g/pcs 2. tested at 100 khz, 0.1Vrms. 3. is the DC current at which inductance drop 20%max from its value without current. 4. is the current that caused a approx /2015
5 MHW2007SG7R0K Flat wire windings provide exceptionally low 20.5MAX MHW2007SG7R0K 3.5± ± ±0.7 MHW2007SG7R0K MAX 20.5 MAX 14.0± MAX 1.5± ± pcs per reel 12.0g/pcs 2. tested at 100 khz, 0.1Vrms. 3. is the DC current at which inductance drop 30% typ from its value without current. 4. is the current that caused a approx /2015
6 EIR20-009SG Fe base metal material core provides large saturation current Flat wire windings provide exceptionally low EIR20-009SG (D)8.0±0.7 (E)11.5± (F)20±0.35 (G)14±0.3 EIR20-009SG (C)9.6± 0.25 (H)2.0±0.5 (I)1.3±0.5 (J)3.0±0.5 (K)1.5±0.5 (P)3.5 (L)3.5±0.2 (Q)2.5 (R) (B)22.5 (M)16.5± 0.5 (X)0.75 (O)3.5 (S)14.0 ( µh) 1.0 (N)2.5±0.3 (W)3.0 (V)5.0 (U)8.0 (T)4.5 Temperature Rise ( ) Current Current 200pcs per reel 13.2g/pcs 2. tested at 100 khz, 1.0Vrms. 3. is the DC current at which inductance drop 20% max from its value without current. 4. is the current that caused a approx /2015
7 EIR20-019SG Fe base metal material core provides large saturation current Flat wire windings provide exceptionally low ±0.3 R9.5MAX B (22.5MAX) EIR20-019SG A (21.5MAX) EIR20-019SG ± ±0.5 C (12.0± 0.3) 14± ± ±0.5 1± ± ± pcs per reel 20.0g/pcs 2. tested at 100 khz, 1.0Vrms. 3. Hi-Pot: coil to core 500VDC,2mA,5Sec 4. is the DC current at which inductance drop 20% max from its value without current. 5. is the current that caused a approx /2015
8 EIR20-015SG Fe base metal material core provides large saturation current Flat wire windings provide exceptionally low 3 (B)18.5 EIR20-015SG 1 2 EIR20-015SG (C) (D)20±0.35 (E)7.5 (I) SURFACES (H)14± ( µh) 1.0 (J)3.8± 0.3 (N)2.5± 0.3 (M)2.5±0.5 (L)1.5 (K)1.95 (K)1.95 (O)18.5 (P)8.0 (Q)4.5 (R)13.5 Temperature Rise ( ) Current Current 250pcs per reel 9.5g/pcs 2. tested at 100 khz, 1.0Vrms. 3. Hi-Pot: coil to core 200VDC,1mA,60Sec 4. is the DC current at which inductance drop 20% max from its value without current. 5. is the current that caused a approx /2015
9 MHW2610SG230K Flat wire windings provide exceptionally low MHW2610SG230K MHW2610SG230K MAX 2.0MAX 18.0±0.3 MAX 4.0± ± ± ± MAX () 0~ 双面导热胶 Tray 44pcs per Tray 21.3g/pcs 2. tested at 100 khz, 0.1Vrms. 3. is the DC current at which inductance drop 20% typ from its value without current. 4. is the current that caused a approx /2015
10 EER25-003SG large saturation current Flat wire windings provide exceptionally low 24.0 ref EER25-003SG ref 顶视图 EER25-003SG REF 1.0 MIN 19.0± REF 0~ ± ± max 19.1± ± ± ± 0.5 8± 0.58± 0.5 底视图 俯视焊盘图 Tray 44pcs per Tray 44.2g/pcs 2. tested at 100 khz, 1.0Vrms. 3. Hi-Pot: coil to core 500VDC,2mA,5Sec 4. is the DC current at which inductance drop 35% max from its value without current. 5. is the current that caused a approx /2015
11 EIR30-011SG Fe base metal material core provides large saturation current Flat wire windings provide exceptionally low 30.2±0.6 EIR30-011SG (B)20.0± (E)6.0±0.3 EIR30-011SG (C)± 0.5 (F)17.0±1.0 (D)0~0.15 (H)5.0±0.5 (G)3.0± (I)1.2 ( µh) 1.0 (J)4.6 (K)8.0 (L)25.0 Temperature Rise ( ) Current Current Tray 36pcs per Tray 28.5g/pcs 2. tested at 100 khz, 1.0Vrms. 3. Hi-Pot: coil to core 500VDC,2mA,5Sec 4. is the DC current at which inductance drop 10% max from its value without current. 5. is the current that caused a approx /2015
12 MCEP125SG1R0M MnZn ferrite core Flat wire windings provide low Tape & reel packing Telecom soft switches, Battery powered devices VRM, multi-phase buck regulators PDA,Notebook computers,, Routers, (B)12.5± ±0.5 1R0M (C)5.5MAX MCEP125SG1R0M (D)8.2 (E)2.6 (I)14.0 (H)7.0 (F)6.9 (J)4.4 (K)11.2 (G)2.5 (L)3.7 ( µh) 1.0 Temperature Rise ( ) Current Current 450pcs per reel 2.7g/pcs 2. tested at 100 khz, 0.1Vrms. 3. is the DC current at which inductance drop 25% max from its value without current. 4. is the current that caused a approx /2015
13 MHW1306SG1R0M 12.7mm x 12.5mm x 6.1mm ferrite core Low resistance Tape & reel packing 12.5±0.5 (E)3.2 Telecom soft switches, Battery powered devices personal navigation systems PDA,Notebook computers,, Routers, (B)12.7± 0.5 1R0M (F)7.5 (D)2.5 (G)2.5 MHW1306SG1R0M (C)6.1 (H)2.4 (K)14.0 (I)7.8 (J)3.7 (H)2.4 (L)3.5 (M) ( µh) Current (N)4.4 (O)11.2 Temperature Rise ( ) Current 450pcs per reel 4.5g/pcs 2. tested at 100 khz, 1.0Vrms. 3. Hi-Pot: coil to core 100VDC,2mA,2Sec 4. Insulation impedance: coil to core 100M Ω 5. is the DC current at which inductance drop (0.8uH Min) from its value without current. 6. is the current that caused a approx /2015
14 MHW1206SGR40M Closed magnetic circuit design reduces leakage flux Fe base metal material core provides large saturation current Low resistance decreases power loss Tape & reel packing Telecom soft switches, Battery powered devices VRM, multi-phase buck regulators PDA,Notebook computers,, Routers, R40M B 13.0±0.5 MHW1206SGR40M C 6.3max. D 2.4± A 12.7± 0.4 F 3.0± Operating temperature rang -40 to pcs per reel 4.1g/pcs 2. tested at 100 khz, 1.0Vrms. 3. Hi-Pot: coil to core 100VDC,2mA,2Sec 4. Insulation impedance: coil to core 100M Ω 5. is the DC current at which inductance drop 20% max from its value without current. 6. is the current that caused a approx /2015
15 MHW2617SG100K Flat wire windings provide exceptionally low 27.9MAX 5.28 Pad is for mounting stability only. Do not connect to ground or other circuits MHW2617SG100K (E)6.9± 0.5 (D)19.8MAX (G)3.6±0.20 MHW2617SG100K 1 2 (B)27.9MAX (F)6.6± (C)17.78MAX ( µh) 1.0 (H)3.8MIN <0.15mm Temperature Rise ( ) Current Current Tray 40pcs per Tray 33.6g/pcs 2. tested at 100 khz, 0.1Vrms. 3. is the DC current at which inductance drop 20% typ from its value without current. 4. is the current that caused a approx /2015
Shielded SMD Power Inductor
PCS62B / 64B PCS73 / 74 Features 1.5 -High power, High saturation inductors -With magnetically shielded against radiation 5.0 -Directly connected electrode on ferrite core -Highly accurate dimensions for
More information2R2. Design Code Design Code M ±20%
Wire Wound SMD Power Inductors WPN Series Operating Temp. : -40 ~+125 (Including self-heating) FEATURES Fe base metal material core provides large saturation current Metallization on ferrite core results
More informationShielded SMD Power Inductor
PCDR 0728 / 0730 / 0732 / 0745 / 1045 PCDR 0628 / 1255 / 1265 / 1275 Features Dimensions Unit:mm -Compact, low profile with low DCR and large current -With magnetically shielded against radiation -Flat
More informationSMD Power Inductors. Type 3624 Series. Type 3624 Series. Electrical Characteristics A Series. Environmental Characteristics A Series
The 3624 series unique design allows for a range of products which give not only a high current rating, but minimizes the board space required for this product. Tyco Sigma quality, matched with reliability
More informationPower Inductor. Shielded. PS Series 2. PCS Series 4. PCDR Series 7. PCDS Series. SCDS Series 12. Packaging Info 14. Environmental Specifications
Power Inductor Shielded PS Series 2 PCS Series 4 PCDR Series 7 PCDS Series 10 SCDS Series 12 Packaging Info 14 Environmental Specifications 16 Tel: 1-888-734-7347 Fax: 919-850-9504 E-mail marketing@seielect.com
More information2R2. 4 Nominal Inductance Packing Tape & Reel. Design Code M ±20%
Wire Wound SMD Power Inductors WPN Series Operating temperature range : -40 ~+125 (Including self-heating) FEATURES Fe base metal material core provides large saturation current Metallization on ferrite
More informationSPECIFICATION FOR APPROVAL INDEX
SPECIFICATION FOR APPROVAL INDEX COVER PAGE INDEX. 0 SHAPES & DIMENSION. 1 PART NUMBER CODE 2 PRODUCT DETAIL 3-5 REEL DIMENSIONS 6 REEL PACKAGING QUANTITY 6 RELIABILITY TEST AND CONDITIONS 7 RECOMMENDED
More informationPower Inductor. Non-shielded. PDH Series 2. PD Series 4. PCD Series 7. Packaging Info 10 Environmental Specifications 12
Power Inductor Non-shielded PDH Series 2 PD Series 4 PCD Series 7 Packaging Info 10 Environmental Specifications 12 Tel: 1-888-734-7347 Fax: 919-850-9504 E-mail marketing@seielect.com http://www.seielect.com
More information2R2. Design Code M ±20%
Wire Wound SMD Power Inductors WPN Series Operating Temp. : -40 ~+125 (Including self-heating) FEATURES Fe base metal material core provides large saturation current Metallization on ferrite core results
More informationPower Inductors - RFB Series
Document 277-1 Power Inductors - RFB Series These low cost power inductors offer a wide range of inductance values, from 2.2 µh to 18 mh. They have an open magnetic construction that gives them high current
More informationPower Inductors RFB Series
Document 277-1 Power Inductors RFB Series Low cost, high current power inductors 2.2 µh to 18 mh inductance range 500 V isolation from winding to core. RFB0810 and RFB1010 have a flame retardant polyolefin
More informationPower Inductor DIP Type
In EC TYPE series color band are marked for identification. These bands indicate inductance value and tolerance. For values below 0.1uH, Gold indicates the decimal point and the next three bands indicate
More informationINPAQ Global RF/Component Solutions
WIP252012Q ZF Series Specification Product Name Series Power Inductor WIP252012Q ZF Series Size EIAJ 2520 WIP252012Q ZF Series Engineering Specification 1. Feature This specification applies Low Profile
More informationPower Inductors. Type 3622 Series. Type 3622 Series. Electrical Characteristics A Series. Key Features
The 3622 Series is an innovative design for a high power SMD choke. It combines Tyco quality with low price and high long-term reliability. The layout and profile make it a highly appropriate component
More informationTYPE A B C D A B C BPSC ± ± BPSC ± ±
SMD Shielded Power Inductors Series Series Features RoHS, Halogen Free and REACH Compliance Magnetic shielded Various package size and wide inductance range Applications AP Routers STBs LCD TVs and monitors
More informationCOMPACT SHIELDED SMD POWER INDUCTOR FOR AUTOMOTIVE
FEATURES APPLICATIONS High reliability wire-wound construction Shielded construction reduces EMI Automotive grade power inductor TS-16949 qualified production PPAP level 3 support AEC-Q200 qualified with
More informationFerrite Cores. Short Form Catalog
Ferrite Cores Short Form Catalog Index Introduction...2 Materials...3 Toroids...4 E, I Cores...14 EFD Cores...18 ETD Cores...20 EER Cores...22 EC Cores...24 U, I, UR Cores...26 Planar E, I Cores...28
More informationMagnetic Products. Inductors Pulse Transformers Current Sensing Transformers Databus Isolators Common-Mode Chokes.
Magnetic Products Inductors Pulse Transformers Sensing Transformers Databus Isolators Common-Mode Chokes Magnetic Products Two essential elements of the vast majority of power electronics applications
More informationFP1008R5 and FP1008R6 High frequency, high current power inductors
Technical Data 152 Effective April 217 FP18R5 and FP18R6 High frequency, high current power inductors Applications Multi-phase and Vcore regulators Voltage Regulator Modules (VRMs) and high power density
More informationSMD POWER INDUCTORS SELECTION GUIDE
SMD POWER INDUCTORS SELECTION GUIDE Unshielded Inductor Type Item Type Dimension (mm) Inductance (uh) Isat (A) Lead Free P/N. DA SERIES DA42 4.0 4.5 3.0 1.0 ~ 68 0.30 ~ 2.18 DA42NP DA43 4.0 4.5 3.5 1.0
More informationWire Wound Chip Inductor (Ferrite)
FEATURES Very strong solderability by reflow soldering, soldering iron or wave soldering Highly accurate dimensions Automated mounting capable Terminals are highly resistant to pull forces Highly resistant
More informationElectrical 25 C Operating Temperature -40 C to 125 C. Application 2 Secondary Inductance Inductance Pri.
EFD Platforms - EFD, EFD0 and EFD Transformers and Inductors Power: 0W to 0W Three Different Platforms: THT and Low Profile Platforms:.mm to.mm Custom designs available Electrical Specifications @ C Operating
More informationSMD Power Inductor-VLH
SMD Power Inductor-VLH Applications Pagers, Cordless phone. High frequency communication products. Personal computers. Disk drives and computer peripherals. power supply circuits. and rated current ranges
More informationCatalogue For Metal Alloy Inductor
Catalogue For Metal Alloy Inductor Features A coil embedded inductor with magnetic metal alloy powder. Shielded construction. Superior DC current characteristics, suitable for large current application.
More informationThe ASPIAIG-F series of molded smd power inductors come in a variety of package sizes. The series supports current handling up TOLERANCE M: ±20%
SERIES DESCRIPTION The SPIIG-F series of molded smd power inductors come in a variety of package sizes. The series supports current handling up FETURES PPLICTIONS PPP ready and supported Excellent current
More informationThermo-set plastic coated parts can withstand a minimum breakdown voltage of 1000Vrms, uniformly applied across the C dimension of the core.
136 14th Edition The ring configuration provides the ultimate in the utilization of the ferrite material properties. Power input filters, ground-fault interrupters, common mode filters, and a variety of
More informationP7604 Family SHIELDED POWER INDUCTOR PRODUCT DATA SHEET
PRODUCT DATA SHEET SHIELDED POWER INDUCTOR P7604 Family Features Magnetic Shielding High Current (to 5A) Low DCR (to 20mΩ) Low profile (3-7mm) Surface Mount Flat top for pick & place Pb-free Applications
More informationMulti-Layer Power Inductors (IP_L Series)
Multi-Layer Power Inductors (IP_L Series) For Choke Application ORDERING CODE IP 2012 2R2 M P L 9 PRODUCT CODE IP : Multilayer Power Inductor (Lead Free) DIMENSION (L X W) Code Dimension EIA 1608 1.6 x
More informationIHLP Selection Example
VISHAY DALE www.vishay.com Magnetics IHLP-1616 APPLICATIONS IHLP-1616AB-01 IHLP-1616AB-11 0.047 0.00325 13.00 32.00 63.11 0.63 0.02 0.14 0.00028 0.10 0.00550 11.50 25.00 47.65 0.84 0.08 1.13 0.00028 0.0050
More informationWire Wound Chip Inductor (Ferrite)-NL Series
Wire Wound Chip Inductor (Ferrite)-NL Series Construction Molding Type 1 2 3 4 1 Molded resin 3 Ferrite core 2 Electrode (Ag) 4 Magnet wire Open Type 4 1 3 2 1 Ferrite core 3 Electrode (Ag/Pd+Ni+Sn) 2
More informationHigh Current, High Frequency Power Inductors HCM1103 Series
High Current, High Frequency Power Inductors HCM1103 Series HALOGEN HF FREE Pb Description Halogen free, lead free, RoHS compliant 125 C maximum total temperature operation 11.5 x 10.3 x 3.0mm maximum
More informationMagnetics Short Form Catalog Electronics Division
Magnetics Short Form Catalog Electronics Division Eaton Electronics Product Selection Tools PARAMETRIC SEARCH Drill down into the Eaton Electronics product database to find the right part for your application.
More informationSLF Series. SMD Power Inductors APPLICATIONS OUTLINE PRODUCT IDENTIFICATION FEATURES SLF - -
Yageo corporation INUCTORS / BEAS SLF Series SM Power Inductors APPLICATIONS Portable telephones, computers, hard disk drives and other electronic equipment. OUTLINE SLF series is designed for low profile
More informationCOMPACT SHIELDED SMD POWER INDUCTOR FOR AUTOMOTIVE
FEATURES APPLICATIONS Low profile 3mm height for compact applications Advanced and high reliability wire-wound construction Shielded construction reduces EMI Automotive grade power inductor TS-16949 qualified
More informationWire Wound Chip Inductor (Ferrite)-NL Series
Wire Wound Chip Inductor (Ferrite)-NL Series Construction 1 Molded resin 3 Ferrite core 2 Electrode (Ag) 4 Magnet wire 1.These revolutionary, highly reliable wound chip inductors for automatic mounting,
More informationSMD Wire Wound Chip Inductors / NLF TYPE(For Signal Line)
.Features: 1.Utilizing a miniaturized winding structure. 2.These products provide higher Q characteristics. 3.Low DC resistance design is ideal for low loss. 4.RoHS compliant..applications: 1.Personal
More informationCM45, CM32, CM25, CM20, CM16, CM10 SMT Chip Inductors
*RoHS COMPLIANT 220K Features High resistance to heat and humidity Resistance to mechanical shock and pressure Accurate dimensions for automatic surface mounting Wide inductance range (1.0 nh to 1000 µh)
More informationPower Inductor DIP Type
PK SERIES PEAKING COIS. Applications:.TVs and Audio equipment..telecommunication devices..personal computer..switching Power Supply..Other noise filter. Shape and Dimensions(Dimensions are in mm) : Item
More informationRM 5 Core and Accessories
Core and Accessories Individual parts Part no. Page Adjusting screwdriver (for assembly only) B63399 204 Matching handle B63399 204 Adjusting screw B65539 B65806 204 Core B65805 98 Clamps B65806 20 Insulating
More informationRADIAL LEADED FIXED INDUCTORS
PK0406/0608/0707/0807/0810/1010/1012/1018/1213 TYPE Shape and size : (Dimensions are in mm) Features : Ordering information :.Low cost. PK 0608-503 K - S0 - TF.Wide range of inductance. (1) (2) (3) (4)
More informationCoiltronics HCM0703 Series High current power inductors
Supersedes September, 2010 Coiltronics HCM0703 Series High current power inductors Applications Voltage Regulator Module (VRM) Multi-phase regulators Point-of-load modules Desktop and server VRMs and EVRDs
More informationFrelTec GmbH. SMD Power Inductors
GmbH Mathildenstr. 10A 82319 Starnberg Germany 10/12/2011 1/13 GmbH www.freltec.com SPECIFICATION Part Number 107 252010 * G * 100 * M E02 * Type Size Use Value Packing 107 : SMD Power Inductor 252010:
More informationSMT Power Inductor High Current Molded Power Inductor - PA4342.XXXNLT Series
Height: 4.0mm Max Footprint: 11.5mm x 10.3mm Max Current Rating: up to 43.0A Inductance Range: 0.15uH to 68.0uH Shielded construction and compact design High current, low DCR, and high efficiency Minimized
More informationPower Inductor SMT Type
UPI F SRIS ULTRA HIGH CURRNT SMT POWR INDUCTOR. Applications:.PDA/Notebook/Desktop, and server applications..dc/dc converters in distributed power systems..dc/dc converter for Field Prograable Gate Array(FPGA).
More informationHigh Current Power Inductors HCM1104 Series
High Current Power Inductors HCM1104 Series HALOGEN HF FREE Pb SMD Device Description Halogen free, lead free, RoHS compliant 125 C maximum total operating temperature 11.5x 10.3 x 4.0mm maximum surface
More informationAXIAL LEADED COATED INDUCTORS
EC TYPE COLOR CODE GUIDE In EC TYPE series color band are marked for identification. These bands indicate inductance value and tolerance. For values below 0.1uH, Gold indicates the decimal point and the
More informationCoiltronics HCM1104 Series High current power inductors
Supersedes March 2012 Coiltronics High current power inductors Applications Voltage Regulator Module (VRM) Multi-phase regulators Point-of-load modules Desktop and server VRMs and EVRDs Base station equipment
More informationINDUCTORS SMD POWER INDUCTORS SMD
INDUCTORS, COIS, FITERS & FERRITES INDUCTORS SMD POWER INDUCTORS SMD K AND CK SERIES STANDARD MUTIAYER INDUCTORS Features: Internal printed coil structure that creates a closed magnetic circuit which acts
More informationJapan. ND (Size 2012) (Size 1608) Non winding (RF, 1E) and wire wound type chip inductors for automatic mounting and high-density mounting
Chip Inductors Japan Series: Chip Type: RF, NC, FA, PE, EA RE, ND, NA, FC, FB, SA, PC, PA, RF (Size 5) 1E (Size 1608) ND (Size 2012) 1C (Size 2520) 1A (Size 3225) FB (Size 4532) Non winding (RF, 1E) and
More informationNXE1 Series Isolated 1W Single Output SM DC-DC Converters
NXE1 Series SELECTION GUIDE Order Code 1 Nominal Input Voltage Output Voltage Input Current Output Current Load Regulation (Typ) Load Regulation (Max) Output Ripple & Noise (Typ) Output Ripple & Noise
More informationUNI-PAC Power Inductors (Surface Mount) NOW AVAILABLE WITH A PROTECTIVE CASE
UNI-PC Description Miniature surface mount design range from 0.470uH to 000uH Current range from 9. to.47 mps imum power density Ideal for applications requiring low inductance and high current in a miniature
More informationRoHS. 1 Ferrite core 3 Electrode (Ag/Pd+Ni+Sn) 2 Magnet wire 4 UV Glue
FEATURES Very strong solderability by flow soldering, soldering iron or wave soldering Highly accurate dimensions, can be mounted automatically Terminals are highly resistant to pull forces Highly resistant
More informationRM 6 Core and Accessories
Core and Accessories Individual parts Part no. Page Adjusting screwdriver (for assembly only) B63399 220 Matching handle B63399 220 Adjusting screw B65659 220 Core B65807 212 Clamps B65808 217 Insulating
More informationMultilayer Suppressors and Inductors. Technical Note
Multilayer Suppressors and Inductors Technical Note A Y A G E O C O M P A N Y Multilayer Suppressors and Inductors Contents Introduction 3 Multilayer Suppressors Features 4 Applications 5 Type Number structure
More informationLow-Profile, Shielded Drum Core, Tapped Inductor SDT30 Series
Low-Profile, Shielded Drum Core, Tapped Inductor SDT0 Series SMD Device Description Halogen Free Approved for use with Maxim MAX45 chip set 5 C maximum total temperature operation. x. x.0mm shielded drum
More informationB Unit: mm TYPE A B C D E F. How to Order KL 1410 M T R60. SEI Type Dimensions Tolerance Packaging Inductance
DIP Power Inductor KL Scope This specification applies to DIP Power Choke. High power Features Magnetic shielded construction for high density board assembly High performance excellent DC current characteristics
More informationSRP1238A Series - Shielded Power Inductors
*RoHS and AEC-Q COMPLIANT Features Shielded construction Carbonyl powder core High saturation current Inductance range:.1 to 1 µh AEC-Q compliant RoHS compliant* and halogen free** SRP1A Series - Shielded
More informationMolded Chip Wirewound Inductors
FEATURES EIA SIZES A (1210), B (1812), C (1008) AND D (0805) EXCELLENT HIGH Q AND HIGH CHARACTERISTICS BOTH FLOW AND REFLOW SOLDERING APPLICABLE HIGH INDUCTANCE AVAILABLE IN SMALL SIZE EMBOSSED PLASTIC
More information1 Moulded resin 2 Electrode (Ag) 3 Ferrite core 4 Magnet wire
Features: Very strong solderability by flow soldering, soldering iron or wave soldering. Highly accurate dimensions, can be mounted automatically. Terminals are highly resistant to pull forces. Highly
More informationHigh Current Power Inductors HCM1104 Series
High Current Power Inductors HCM1104 Series HALOGEN HF FREE Pb SMD Device Description Halogen free, lead free, RoHS compliant 125 C maximum total operating temperature 11.5x 10.3 x 4.0mm maximum surface
More informationSELECTION GUIDE. Nominal Input Voltage. Output Voltage. Input Current. Input reflected ripple current
SELECTION GUIDE NXE2 Series FEATURES Patents pending Lower Profile UL69 Recognised ANSI/AAMI ES661-1 Recognised 3kVDC Isolation Hi Pot Test Substrate Embedded Transformer Automated Manufacture Industry
More informationMTU1 Series Isolated 1W Single & Dual Output SM DC/DC Converters
www.murata-ps.com MTU1 Series SELECTION GUIDE FEATURES Patent Protected UL60950 recognised Footprint over pins 0.69cm 2 Single & dual isolated output 1kVDC Isolation Hi Pot Test Efficiency up to 88% (Typ.)
More informationYAGEO CORPORATION SMD INDUCTOR / BEADS. LCN Series. Lead-free / For RF Signals / Customer Design
YAGEO CORPORATION SMD INDUCTOR / EADS Wound Chip Inductors High Frequency LCN Series Lead-free / For RF Signals / Customer Design Due to technical expertise of accurately wounding skill,these chip inductors
More informationNXE2 Series Isolated 2W Single Output SM DC-DC Converters
SELECTION GUIDE NXE2 Series FEATURES Patents pending Lower Profile UL69 Recognised ANSI/AAMI ES661-1 Recognised 3kVDC Isolation Hi Pot Test Substrate Embedded Transformer Automated Manufacture Industry
More informationSELECTION GUIDE. Nominal Input Voltage. Output Voltage. Input Current. Input reflected ripple current
SELECTION GUIDE FEATURES Patents pending Lower Profile UL9 Recognised ANSI/AAMI ES1-1 Recognised 3kVDC Isolation Hi Pot Test Substrate Embedded Transformer Automated Manufacture Industry Standard Footprint
More informationSELECTION GUIDE. Order code B0303NXT-1W B0305NXT-1W B0309NXT-1W
B-NXT-1W 1W, FIXED INPUT, ISOLATED SINGLE OUTPUT SMD DC-DC CONVERTER FEATURES Footprint over pins 1.37cm 2 Short Circuit Protection(automatic recovery) I/O isolation voltage 1000VDC Operating Temperature:
More informationNXJ2 Series Isolated 2W Single Output SM DC-DC Converters
NXJ2 Series SELECTION GUIDE FEATURES Patents pending Lower Profile UL69 Recognition pending ANSI/AAMI ES661-1, 2 MOOP, 1MOPP recognition pending 5.2kVDC Isolation Hi Pot Test Substrate Embedded Transformer
More informationCONTENT Ferrites for cable assembly
www.schmid-m.com EMC & Inductors CONTENT Ferrites for cable assembly Round cable snap ferrites SMLF Flat Ferrite with Clip SRPS Flat Ferrite Cores SRP Toroidal Cores ST Axial Ferrite Beads SRH Ferrite
More informationRJ45 SINGLE PORT 100/1000/2.5G/5G BASE-T MAGNETICS
SERIES DESCRIPTION The series of RJ45 jacks with internal magnetics supports a wide range of configurations in 10/100Base-T, 1000Base-T, 2.5GBase-T and 5GBase-T applications. This series offers the ability
More informationDesign of DC/DC Converters for 42V Automotive Applications
Design of DC/DC Converters for 42V Automotive Applications J. Mark Christini, PE Senior Application Engineer, Electromechanical Products Ansoft Corporation Pittsburgh, PA Outline Introducing the application:
More informationSELECTION GUIDE. Nominal Input Voltage. Output Voltage. Input reflected ripple current. Switching frequency NXE1S0305MC 85
SELECTION GUIDE Order Code 1 Nominal Input Voltage Output Voltage Input Current Output Current Load Regulation (Typ) Load Regulation (Max) Output Ripple & Noise (Typ) Output Ripple & Noise (Max) Efficiency
More informationP7609 Family POWER INDUCTOR PRODUCT DATA SHEET
PRODUCT DATA SHEET POWER INDUCTOR P7609 Family Features Current to 3.8A Low DCR (to 30mΩ) Low profile (to 2.2mm) Surface Mount Flat top for pick & place Electroplated terminals Applications DC-DC Converters
More informationSMT Shielded Power Inductors IDM6025, IDM6028, IDM6045, IDM7032, IDM7045, IDM7055, IDM10145, IDM12555, IDM12565, IDM12575, IDM6028.
SMT Shielded Power s IDM6025, IDM6028, IDM6045, IDM7032, IDM7045, IDM7055, IDM10145, IDM12555, IDM12565, IDM12575, IDM6028 Configurations: FEATURES Magnetically shielded construction. Compact and thin.
More informationFEATURES 特性 APPLICATIONS 用途 PART NUMBERING SYSTEM 品名系统 STRUCTURAL DRAWING 结构图. containing ferrite powder 1. 表面贴装, 小型 超薄电感器, 大功率, 高饱和, 低电阻之特性.
FEATURES 特性 1. 表面贴装, 小型 超薄电感器, 大功率, 高饱和, 低电阻之特性. he inductor designed as surface mounting, smallest and thinnest with high power, high saturation and low resistance 2. 磁性胶水涂敷结构极大减少了噪声, 闭合磁路结构设计, 漏磁少, 抗
More informationSELECTION GUIDE FOR STANDARD COILS
Variable Coils TYPE 10EZ 10mm TYPE 10EZ, 10EZ High Frequency Frequency Range: 0.2~2MHz (10EZ) 2~15MHz (10EZ High ) Inductance Range: 1µH~2mH (10EZ) 2~55µH (10EZ High ) Temperature Coefficient: Inductor
More informationMTU2 Series Isolated 2W Single & Dual Output SM DC/DC Converters
www.murata-ps.com MTU2 Series SELECTION GUIDE FEATURES Patent Protected UL 9 Recognised Footprint over pins.69cm 2 Single & dual isolated output 1kVDC Isolation Hi Pot Test Efficiency up to 85% (Typ.)
More informationDesign Kits with free lifetime refills. Ferrites Inductors RF components Gasketing Transformers Varistors
Design Kits with free lifetime refills Ferrites Inductors RF components Gasketing Transformers Varistors Design Kits with free lifetime refills Ferrites Inductors RF components Gasketing Transformers Varistors
More informationNXJ1 Series Isolated 1W Single Output SM DC-DC Converters
SELECTION GUIDE FEATURES Patents pending Lower Profile UL9 Recognised ANSI/AAMI ES-, 2 MOOP, MOPP Recognised 4.2kVDC Isolation Hi Pot Test Substrate Embedded Transformer Automated Manufacture Industry
More informationVLS-E series. Inductors for Power Circuits. Wound Ferrite
May 2013 Inductors for Power Circuits Wound Ferrite VLS-E series VLS201610E VLS201612E VLS2010E VLS2012E VLS252008E VLS252010E VLS252012E VLS252015E VLS3010E VLS3012E VLS3015E VLS4012E (1/52) REMINDERS
More information(TCRC) Power Choke Coil Inductors. Token Electronics Industry Co., Ltd. Version: July 31, Web:
Version: July 31, 2017 (TCRC) Power Choke Coil Inductors Token Electronics Industry Co., Ltd. Web: www.token.com.tw Email: rfq@token.com.tw Taiwan: No.137, Sec. 1, Zhongxing Rd., Wugu District, New Taipei
More informationNXE1 Series Isolated 1W Single Output SM DC/DC Converters
NXE1 Series SELECTION GUIDE FEATURES Patents pending Lower Profile UL695 Recognition pending ANSI/AAMI ES661-1 Recognition pending 3kVDC Isolation Hi Pot Test Substrate Embedded Transformer Automated Manufacture
More informationRF Type 5 (04) Dimensions in mm (not to scale) Recommended Land Pattern in mm (not to scale) 0.2± ± ± ±0.05 Standard Packing uantit
Chip Inductors High Frequency Use (Non Magnetic Core) Type: ELJRF ELJRE Features High frequency capability due to its non magnetic core. Capable of being Re-fl ow or fl ow soldered. Unique Ceramic Core/Laser-cut
More information74 ( ) 127 ( ) A [0,315] 2,20 [0,079] [0,087] 1,60 [0,063] Land Pattern
A FEATURES Shielded Construction with very low DCR Heating Current rating up to 17.9 Amps Saturation Current rating up to 7.5 Amps (based on only 10% inductance drop) Inductance up to 1mH for all case
More informationWire Wound Chip Inductors Ferrite SMD
GmbH Mathildenstr. 10A 82319 Starnberg Germany Wire Wound Chip Inductors Ferrite SMD 5/10/2018 1/13 GmbH www.freltec.com SPECIFICATION Part Number 095 05 * 101 * J * E02 _ * Type Size Value Packing Current
More informationPower Inductors (IP Series)
Multi-Layer Power Inductors (IP Series) ORDERING CODE... 1 Standard External Dimensions... 2 Power Inductor for Choke (L Type)... 3 Power Inductor for DC/DC converter (S Type)... 4 Testing Condition &
More informationRecommended Applications AV equipment, Wireless communication equipment and various types of general electronic equipment.
4. High Power Type PF, PE, PC, PA, PB, LC, LA Features Low DCR and large current capability, suitable for power circuitry. Wire wound, resin molded chip inductor. (PC, PA, PB, LC, LA type) Unique Ceramic
More informationAML series. Caution. Choke coil for DC motors EMC. Products in this catalog are in preparation for mass production.
May 207 hoke coil for motors M M series M03 M04 M04 M05 M06 M08 M09 M0 M3 aution Products in this catalog are in preparation for mass production. (2/3) RMINRS OR USING THS PROUTS efore using these products,
More informationSMT power inductors. Size 12.5 x 12.5 x 6 (mm) B82477P2 IN TCF PMD A
Series/Type: Ordering code: Date: May 2009 Version: 02 Content of header bars 1 and 2 of data sheet will be automatically entered in headers and footers! Please fill in the table and then change the color
More informationWire Wound Chip Inductor Ferrite
Applications: Features: Very strong solderability by flow soldering, soldering iron or wave soldering Highly accurate dimensions, can be mounted automatically Terminals are highly resistant to pull forces
More informationSurface Mount Shielded Power Inductors
SCRB Series ( ------SCRB Applications( : Features( : 1, To be high saturation for surface mounting.( 2, Surface mount inductor with high current rating.( 3.Low resistance to keep power loss minimum.( 4,
More informationAXIAL LEAD TYPE INDUCTOR
KH CODE NUMBER COMPOSITION AL 0410-331 K T 1 2 3 4 5 1 Product name : Axial Leaded Inductor 2 Dimension ( Diameter Height ) 0307: 3.0mm 7.0 mm 0410: 4.2mm 9.8 mm 3 Inductance 4R7: 4.7 μh, 331: 330 μh,
More informationGas Discharge Tubes SL1002A Series
SL12A Series SL12A Series RoHS Agency Approvals AGENCY AGENCY FILE NUMBER E128662 2 Electrode GDT Graphical Symbol Additional Information Description The Broadband Optimized SL12A series has been especially
More informationType AHA SMT Aluminum Electrolytic Capacitors -55 C to +105 C - Long Life
Long Life Filtering, Bypassing, Power Supply Decoupling Capacitors deliver twice the life of many SMT aluminum capacitor types, and they handle high levels of ripple current. The AHA can handle the ripple
More informationLow Signal Relay. To Order: Select the part number and add the desired coil voltage rating, (e.g., G6A-274P-ST-US-DC12).
Low Signal Relay High sensitivity can be driven by digital circuits Low-profile design allows use in 12.70 mm (0.50 in) PC board rack Surge withstand voltage meets FCC Part 68 regulation Units can be mounted
More information(TCRB) Radial High Rated Current Choke
Version: December 22, 2017 Electronics Tech. (TCRB) Radial High Rated Current Choke Web: www.direct-token.com Email: rfq@direct-token.com Direct Electronics Industry Co., Ltd. China: 12F, Zhong Xing Industry
More informationFIXED INDUCTORS FEATURES
FEATURES Extremely reliable inductors that are ideal for automatic insertion. Highly efficient automated production processes can provide high quality inductors in large volumes. Wide selection of configurations
More informationType AVS SMT Aluminum Electrolytic Capacitors - General Purpose, 85 C
General Purpose Filtering, Bypassing, Power Supply Decoupling Specifications Operating Temperature: Rated voltage: Capacitance: D.F. (@ 20 C): Capacitance Tolerance: Leakage Current: Ripple Current Multipliers:
More informationPower Inductor SMT Type
SMD SERIES WIRE WOUND SMD CHIP INDUCTORS Applications :.DSC, DVC products..pcs.hard disk drives and computer peripherals..telecommunications devices..tv circuits..test equipment. Shape and Dimensions (Dimensions
More information2A Switch-Mode Li-Ion Battery Charger
2A Switch-Mode Li-Ion Battery Charger General Description The is a highly integrated switch-mode Li-Ion Battery Charger. With few external components, is well suited for a wide range of portable applications.
More informationSELECTION GUIDE. Order code Voltage(VDC) NTE0303XMC NTE0305XMC
1W, FIXED INPUT, ISOLATED SINGLE OUTPUT SMD DC-DC CONVERTER FEATURES Footprint over pins 1.37cm 2 Short Circuit Protection(automatic recovery) I/O isolation voltage 1000VDC Operating Temperature: -40 ~+85
More information