AML series. Caution. Choke coil for DC motors EMC. Products in this catalog are in preparation for mass production.

Transcription

1 May 207 hoke coil for motors M M series M03 M04 M04 M05 M06 M08 M09 M0 M3 aution Products in this catalog are in preparation for mass production.

2 (2/3) RMINRS OR USING THS PROUTS efore using these products, be sure to request the delivery specifications. STY RMINRS Please pay sufficient attention to the warnings for safe designing when using this products. RMINRS The storage period is less than 2 months. e sure to follow the storage conditions (temperature: 5 to 40, humidity: 0 to 75% RH or less). If the storage period elapses, the soldering of the terminal electrodes may deteriorate. o not use or store in locations where there are conditions such as gas corrosion (salt, acid, alkali, etc.). Soldering corrections after mounting should be within the range of the conditions determined in the specifications. If overheated, a short circuit, performance deterioration, or lifespan shortening may occur. When embedding a printed circuit board where a product is mounted to a set, be sure that residual stress is not given to the product due to the overall distortion of the printed circuit board and partial distortion such as at screw tightening portions. Self heating (temperature increase) occurs when the power is turned ON, so the tolerance should be sufficient for the set thermal design. arefully lay out the coil for the circuit board design of the non-magnetic shield type. malfunction may occur due to magnetic interference. Use a wrist band to discharge static electricity in your body through the grounding wire. o not expose the products to magnets or magnetic fields. o not use for a purpose outside of the contents regulated in the delivery specifications. The products listed on this catalog are intended for use in general electronic equipment (V equipment, telecommunications equipment, home appliances, amusement equipment, computer equipment, personal equipment, office equipment, measurement equipment, industrial robots) under a normal operation and use condition. The products are not designed or warranted to meet the requirements of the applications listed below, whose performance and/or quality require a more stringent level of safety or reliability, or whose failure, malfunction or trouble could cause serious damage to society, person or property. If you intend to use the products in the applications listed below or if you have special requirements exceeding the range or conditions set forth in the each catalog, please contact us. () erospace/aviation equipment (2) Transportation equipment (electric trains, ships, etc.) (3) Medical equipment (4) Power-generation control equipment (5) tomic energy-related equipment (6) Seabed equipment (7) Transportation control equipment (8) Public information-processing equipment (9) Military equipment (0) lectric heating apparatus, burning equipment () isaster prevention/crime prevention equipment (2) Safety equipment (3) Other applications that are not considered general-purpose applications When designing your equipment even for general-purpose applications, you are kindly requested to take into consideration securing protection circuit/device or providing backup circuits in your equipment / power_line_chokes_aml_en.fm

3 (3/3) hoke coil for motors M Overview of the M series TURS Miniaturization by high saturation magnetic flux density of ferrite cores used in-house development Mount possible terminal STRUTUR to a motor drive digital orrespond to onboard requiring quality Having excellent high-frequency characteristics, and eliminate noise of wide frequency bands PPITION The noise removing circuit of on - board - motor lectronically controlled throttle, power seat motor, variable valve controller S, electric power steering, blow Wow, an air pump, etc. Support of the automotive quality requirements PRT NUMR ONSTRUTION M 04 S 5-4R0 M 6R0 - R Series name Max O (mm) ategory (optional) ength (mm) Inductance (µh) Inductance tolerance Rated current () Terminal type 04 4 to 5mm Nothing lassifying non 5 5mm 4R0 4µH K ±0% 6R0 6 S Straight O Size M ±20% xial direction O Size Y ±other R Radial O Size Special specifications Internal code OPRTING TMPRTUR RNG Operating temperature Temperature ranges Storage temperature 40 to to 50 Operating temperature range includes self-temperature rise. The storage temperature range is for after the assembly / power_line_chokes_aml_en.fm

4 (4/3) Overview of the M series HRTRISTIS SPIITION TS Series name Width ength Wire gage Inductance Rdc Weight Rated current (mm) (mm) (mm) (µh)typ. (m )typ. (g) ()max. M033-2R3M5R0-S M037-4R4M3R5-S M039-5R9M2R5-S M043-2R2M6R5-S M046-4RM4R7-S M049-6R0M3R7-S M043-2R3M9R0-S M046-4R6M6R5-S M048-6R2M5R0-S M053-2R3M00-S M056-4R5M8R0-S M059-6R7M6R5-S M065-2R9M30-S M068-4R4M00-S M0620-5R9M8R2-S M0820-3R7M20-S M0925-8R0M0-S M025-R9M240-S M330-4R7M250-S / power_line_chokes_aml_en.fm

5 (5/3) M03 type SHP & IMNSIONS imensions in mm (Soldering portion) M033-2R3M5R0-S M037-4R4M3R5-S M039-5R9M2R5-S TRI HRTRISTIS M033-2R3M5R0-S M037-4R4M3R5-S M039-5R9M2R5-S k 6.0 M039-5R9M2R5-S k M037-4R4M3R5-S M033-2R3M5R0-S k 00 0 M039-5R9M2R5-S.0 M037-4R4M3R5-S M033-2R3M5R0-S current() / power_line_chokes_aml_en.fm

6 (6/3) M04 type SHP & IMNSIONS imensions in mm (Soldering portion) M043-2R2M6R5-S M046-4RM4R7-S M049-6R0M3R7-S TRI HRTRISTIS M043-2R2M6R5-S M046-4RM4R7-S M049-6R0M3R7-S k 6.0 M049-6R0M3R7-S M046-4RM4R7-S M043-2R2M6R5-S current() 0k k M049-6R0M3R7-S M046-4RM4R7-S M043-2R2M6R5-S / power_line_chokes_aml_en.fm

7 (7/3) M04 type SHP & IMNSIONS imensions in mm (Soldering portion) M043-2R3M9R0-S M046-4R6M6R5-S M048-6R2M5R0-S TRI HRTRISTIS M043-2R3M9R0-S M046-4R6M6R5-S M048-6R2M5R0-S k M048-6R2M5R0-S 6.0 M046-4R6M6R5-S M043-2R3M9R0-S k k 00 0 M048-6R2M5R0-S M046-4R6M6R5-S M043-2R3M9R0-S current() / power_line_chokes_aml_en.fm

8 (8/3) M05 type SHP & IMNSIONS imensions in mm (Soldering portion) M053-2R3M00-S M056-4R5M8R0-S M059-6R7M6R5-S TRI HRTRISTIS M053-2R3M00-S M056-4R5M8R0-S M059-6R7M6R5-S k M059-6R7M6R5-S k M056-4R5M8R0-S M053-2R3M00-S k 00 0 M059-6R7M6R5-S.0 M056-4R5M8R0-S M053-2R3M00-S current() / power_line_chokes_aml_en.fm

9 (9/3) M06 type SHP & IMNSIONS imensions in mm (Soldering portion) M065-2R9M30-S M068-4R4M00-S M0620-5R9M8R2-S TRI HRTRISTIS M065-2R9M30-S M068-4R4M00-S M0620-5R9M8R2-S k 6.0 M0620-5R9M8R2-S k M068-4R4M00-S M065-2R9M30-S k 00 0 M0620-5R9M8R2-S.0 M068-4R4M00-S M065-2R9M30-S current() / power_line_chokes_aml_en.fm

10 (0/3) M08 type SHP & IMNSIONS imensions in mm (Soldering portion) M0820-3R7M20-S TRI HRTRISTIS M0820-3R7M20-S k 0k k current() / power_line_chokes_aml_en.fm

11 (/3) M09 type SHP & IMNSIONS imensions in mm (Soldering portion) M0925-8R0M0-S TRI HRTRISTIS M0925-8R0M0-S k 0k k current() / power_line_chokes_aml_en.fm

12 (2/3) M0 type SHP & IMNSIONS imensions in mm (Soldering portion) M025-R9M240-S TRI HRTRISTIS M025-R9M240-S k 0k k current() / power_line_chokes_aml_en.fm

13 (3/3) M3 type SHP & IMNSIONS imensions in mm (Soldering portion) M330-4R7M250-S TRI HRTRISTIS M330-4R7M250-S k k k current() / power_line_chokes_aml_en.fm