ANT025020LCT1575MA1. Multilayer Antenna (Triple Band type) For MHz / MHz / MHz. 2.5x2.0mm [EIA 1008]* September 2016
|
|
- Emery James
- 5 years ago
- Views:
Transcription
1 R F C o m p o n e n t s September 216 Multilayer Antenna (Triple Band type) For MHz / MHz / MHz ANT252LCT1575MA1 2.5x2.mm [EIA 18]* * Dimensions Code JIS[EIA]
2 Multilayer Antenna (Triple Band type) For MHz / MHz / MHz Conformity to RoHS Directive ANT252LCT1575MA1 SHAPES AND DIMENSIONS [Top view] 2.5±.2 (4).6±.1 (1) (3) 2.±.2 (2) Marking [Bottom view] (.21).52±.2 (.21).74±.2 Terminal functions 1 Radiator electrode for GPS 2 Radiator electrode for 5.5GHz 3 Feed point 4 Radiator electrode for 2.4GHz Dimensions in mm RECOMMENDED LAND PATTERN SOLDER RESIST PATTERN Dimensions in mm 1.9 Dimensions in mm RoHS Directive Compliant Product: See the following for more details / rf_ant_ant252lct1575ma1_summary
3 ANT252LCT1575MA1 EVALUATION BOARD Mt Common Ft 5.5GHz ANT252LCT1575MA1 Ft GPS PCB size : 13mm x 75mm x 1mm Antenna area : 16 x 6 mm Ft 2.4GHz Ft GPS Ft 2.4GHz Ft 5.5GHz Mt Common Component P/N 3.nH 1.6pF 1.nH 2.7nH Measurement condition for Radiation Pattern Er PCB θ Eø Chip antenna Eθ ø / rf_ant_ant252lct1575ma1_summary
4 ANT252LCT1575MA1 ELECTRICAL CHARACTERISTICS Item Frequency Range (MHz) Min. Typ. Max to to to Polarization Linear PCB size (mm) 13 x 75 Antenna keep-out area (mm) 16 x 6 Characteristic Impedance ( ) 5 (Nominal) This is typical antenna performance with the standard PCB. TEMPERATURE RANGE Operating temperature Storage temperature C C 4 to to +85 FREQUENC CHARACTERISTICS GPS BAND Efficiency(dB) Efficiency Spec () 2.4GHz BAND 5.5GHz BAND Efficiency(dB) Efficiency Spec () Efficiency(dB) Efficiency Spec () Tested antenna has been soldered. Evaluation board size is 13x75x1 mm / rf_ant_ant252lct1575ma1_summary
5 ANT252LCT1575MA1 RADIATION PATTERNS GPS BAND RHCP - plane - plane - plane 27 1(dBi) (dBi) (dBi) Average(dBic) Maximum(dBic) Minimum(dBic) Average(dBic) Maximum(dBic) Minimum(dBic) Average(dBic) Maximum(dBic) Minimum(dBic) Tested antenna has been soldered. Evaluation board size is 13x75x1 mm / rf_ant_ant252lct1575ma1_summary
6 ANT252LCT1575MA1 RADIATION PATTERNS 2.4GHz BAND 27 1(dBi) (dBi) GHz GHz GHz GHz GHz GHz (dBi) GHz GHz GHz 27 1(dBi) GHz GHz GHz 27 1(dBi) (dBi) GHz GHz GHz GHz GHz GHz Tested antenna has been soldered. Evaluation board size is 13x75x1 mm / rf_ant_ant252lct1575ma1_summary
7 ANT252LCT1575MA1 RADIATION PATTERNS 5.5GHz BAND 27 1(dBi) (dBi) GHz 5.5GHz 5.85GHz GHz 5.5GHz 5.85GHz (dBi) GHz 5.5GHz 5.85GHz 27 1(dBi) GHz 5.5GHz 5.85GHz 27 1(dBi) (dBi) GHz 5.5GHz 5.85GHz GHz 5.5GHz 5.85GHz Tested antenna has been soldered. Evaluation board size is 13x75x1 mm / rf_ant_ant252lct1575ma1_summary
8 ANT252LCT1575MA1 RECOMMENDED REFLOW PROFILE Soaking Working Soldering Peak T4 T5 T4 T: Temperature T2 T3 t3 T3 T1 t1 t2 t: Time Soaking Working Soldering Peak Temp. Time Temp. Time Temp. Time Temp. T1 T2 t1 T3 t2 T4 t3 T5 15 C 18 C 6 to 12s 23 C 3 to 6s 247 to 253 C within 1s 26 C max / rf_ant_ant252lct1575ma1_summary
9 ANT252LCT1575MA1 PACKAGING STLE REEL DIMENSIONS 2.±.5 ø ø ø13±.2 ø21± ±1. Dimensions in mm TAPE DIMENSIONS ø ±.5 4.± ±.1.25±.5 B 3.5±.5 8.±.2 A 4.±.1 K Dimensions in mm A B K 2.35± ±.5.9±.5 PACKAGE QUANTIT Standard package quantity (pieces/reel) 2, / rf_ant_ant252lct1575ma1_summary
10 REMINDERS FOR USING THESE PRODUCTS Before using these products, be sure to request the delivery specifications. SAFET REMINDERS Please pay sufficient attention to the warnings for safe designing when using these products. REMINDERS The products listed on this catalog are intended for use in general electronic equipment (AV equipment, telecommunications equipment, home appliances, amusement equipment, computer equipment, personal equipment, office equipment, measurement equipment, industrial robots) under a normal operation and use condition. The products are not designed or warranted to meet the requirements of the applications listed below, whose performance and/or quality require a more stringent level of safety or reliability, or whose failure, malfunction or trouble could cause serious damage to society, person or property. Please understand that we are not responsible for any damage or liability caused by use of the products in any of the applications below or for any other use exceeding the range or conditions set forth in this catalog. (1) Aerospace/Aviation equipment (2) Transportation equipment (cars, electric trains, ships, etc.) (3) Medical equipment (4) Power-generation control equipment (5) Atomic energy-related equipment (6) Seabed equipment (7) Transportation control equipment (8) Public information-processing equipment (9) Military equipment (1) Electric heating apparatus, burning equipment (11) Disaster prevention/crime prevention equipment (12) Safety equipment (13) Other applications that are not considered general-purpose applications When using this product in general-purpose applications, you are kindly requested to take into consideration securing protection circuit/ equipment or providing backup circuits, etc., to ensure higher safety / rf_ant_ant252lct1575ma1_summary
June Multilayer Low Pass Filter. For MHz DEA162500LT-1217A1. 1.6x0.8mm [EIA 0603]* * Dimensions Code JIS[EIA]
R F C o m p o n e n t s June 2015 Multilayer Low Pass Filter For 2400-2500MHz 1.6x0.8mm [EIA 0603]* * Dimensions Code JIS[EIA] Multilayer Low Pass Filter For 2400-2500MHz Conformity to RoHS Directive SHAPES
More informationJuly Multilayer Band Pass Filter. For MHz DEA162450BT-1210A1. 1.6x0.8mm [EIA 0603]* * Dimensions Code JIS[EIA]
R F C o m p o n e n t s July 2017 Multilayer Band Pass Filter For 2400-2500MHz 1.6x0.8mm [EIA 0603]* * Dimensions Code JIS[EIA] Multilayer Band Pass Filter For 2400-2500MHz Conformity to RoHS Directive
More informationJune Multilayer Low Pass Filter. For MHz DEA163800LT-5017C1. 1.6x0.8mm [EIA 0603]* * Dimensions Code JIS[EIA]
R F C o m p o n e n t s June 2015 Multilayer Low Pass Filter For 3300-3800MHz 1.6x0.8mm [EIA 0603]* * Dimensions Code JIS[EIA] Multilayer Low Pass Filter For 3300-3800MHz Conformity to RoHS Directive SHAPES
More informationJune Multilayer Band Pass Filter. For MHz DEA162450BT-1260B2. 1.6x0.8mm [EIA 0603]* * Dimensions Code JIS[EIA]
R F C o m p o n e n t s June 2015 Multilayer Band Pass Filter For 2400-2500MHz 1.6x0.8mm [EIA 0603]* * Dimensions Code JIS[EIA] Multilayer Band Pass Filter For 2400-2500MHz Conformity to RoHS Directive
More informationJune Multilayer Band Pass Filter. For MHz DEA203600BT-1240B2. 2.0x1.25mm [EIA 0805]* * Dimensions Code JIS[EIA]
R F C o m p o n e n t s June 2015 Multilayer Band Pass Filter For 3300-3900MHz 2.0x1.25mm [EIA 0805]* * Dimensions Code JIS[EIA] Multilayer Band Pass Filter For 3300-3900MHz Conformity to RoHS Directive
More informationJanuary Multilayer Low Pass Filter. For MHz DEA101990LT-6302B1. 1.0x0.5mm [EIA 0402]* * Dimensions Code JIS[EIA]
R F C o m p o n e n t s January 2016 Multilayer Low Pass Filter For 1710-1990MHz 1.0x0.5mm [EIA 0402]* * Dimensions Code JIS[EIA] Multilayer Low Pass Filter For 1710-1990MHz Conformity to RoHS Directive
More informationJune Multilayer Low Pass Filter. For MHz DEA160960LT-5044C1. 1.6x0.8mm [EIA 0603]* * Dimensions Code JIS[EIA]
R F C o m p o n e n t s June 2015 Multilayer Low Pass Filter For 699-960MHz 1.6x0.8mm [EIA 0603]* * Dimensions Code JIS[EIA] Multilayer Low Pass Filter For 699-960MHz Conformity to RoHS Directive SHAPES
More informationApril Multilayer Phase Shifter (Delay Line) For MHz DEA101910DT-6016A1. 1.0x0.5mm [EIA 0402]* * Dimensions Code JIS[EIA]
R F C o m p o n e n t s April 2015 Multilayer Phase Shifter (Delay Line) For 1710-1910MHz 1.0x0.5mm [EIA 0402]* * Dimensions Code JIS[EIA] Multilayer Phase Shifter (Delay Line) For 1710-1910MHz Conformity
More informationApril Multilayer Directional Coupler. For MHz HHM2220SA3. 1.6x0.8mm [EIA 0603]* * Dimensions Code JIS[EIA]
R F C o m p o n e n t s April 2015 Multilayer Directional Coupler For 1920-1980MHz 1.6x0.8mm [EIA 0603]* * Dimensions Code JIS[EIA] Multilayer Directional Coupler For 1920-1980MHz Conformity to RoHS Directive
More informationOctober Circulator SMD. CU4S0506 Series. 5x5mm* * Dimensions Code JIS
R F C o m p o n e n t s October 2015 Circulator SMD 5x5mm* * Dimensions Code JIS Circulator SMD Product compatible with RoHS directive Overview of PART NUMBER CONSTRUCTION CU4S0506 C - - Series name A
More informationOctober Isolator SMD. CU4S0506 Series. 5x5mm* * Dimensions Code JIS
R F C o m p o n e n t s October 2015 Isolator SMD CU4S0506 Series 5x5mm* * Dimensions Code JIS Isolator SMD Product compatible with RoHS directive Overview of CU4S0506 Series PART NUMBER CONSTRUCTION CU4S0506
More informationDecember Inductors for high frequency circuits. Multilayer ceramic. MLG series (for automotive) MLG1005S type. * Dimensions Code JIS[EIA]
I N D U C T O R S December 2017 Inductors for high frequency circuits Multilayer ceramic MLG series (for automotive) MLG1005S 1005 [0402 inch]* * Dimensions Code JIS[EIA] (2/16) REMINDERS FOR USING THESE
More informationNovember Inductors for high frequency circuits. Multilayer ceramic. MHQ-P series. MHQ1005P type. * Dimensions code: JIS[EIA]
I N D U C T O R S November 2017 Inductors for high circuits Multilayer ceramic MHQ-P series MHQ1005P 1005 [0402 inch]* * Dimensions code: JIS[EIA] (2/20) REMINDERS FOR USING THESE PRODUCTS Before using
More informationFebruary Inductors for High Frequency Circuits. Multilayer Ceramic. MLG-P Series. MLG0402P Type. * Dimensions Code JIS[EIA]
I N D U C T O R S February 2017 Inductors for High Frequency Circuits Multilayer Ceramic MLG-P Series MLG0402P 0402 [01005 inch]* * Dimensions Code JIS[EIA] (2/16) REMINDERS FOR USING THESE PRODUCTS Before
More informationNovember Inductors for high frequency circuits. Multilayer ceramic. MHQ-P series (for automotive) MHQ1005P type. * Dimensions code: JIS[EIA]
I N D U C T O R S November 2017 Inductors for high circuits Multilayer ceramic MHQ-P series (for automotive) MHQ1005P 1005 [0402 inch]* * Dimensions code: JIS[EIA] (2/20) REMINDERS FOR USING THESE PRODUCTS
More informationFebruary Inductors for High Frequency Circuits. Multilayer Ceramic. MLG-P Series. MLG0603P Type. * Dimensions Code JIS[EIA]
I N D U C T O R S February 2017 Inductors for High Frequency Circuits Multilayer Ceramic MLG-P Series MLG0603P 0603 [0201 inch]* * Dimensions Code JIS[EIA] (2/17) REMINDERS FOR USING THESE PRODUCTS Before
More informationFebruary Inductors for High Frequency Circuits. Multilayer Ceramic. MLK Series. MLK0603 Type [0201 inch]* * Dimensions Code JIS[EIA]
February 2015 Inductors for High Frequency Circuits Multilayer Ceramic MLK Series MLK0603 0603 [0201 inch]* * Dimensions Code JIS[EIA] (2/10) REMINDERS FOR USING THESE PRODUCTS Before using these products,
More informationChip beads. For power line Large current/low DC resistance type. MPZ-H series. MPZ1005-H type. * Dimensions code JIS[EIA]
E M C C o m p o n e n t s September 27 Chip beads For power line Large current/low DC resistance type MPZ-H series MPZ5-H type MPZ5-H 5[42 inch]* * Dimensions code JIS[EIA] (2/) REMINDERS FOR USING THESE
More informationChip beads. For power line Soft termination. KPZ-HR series (for automobiles) KPZ1608-HR type. * Dimensions code JIS[EIA]
E M C C o m p o n e n t s March 217 Chip beads For power line Soft termination KPZ-HR series (for automobiles) KPZ168-HR 168[63 inch]* * Dimensions code JIS[EIA] (2/1) REMINDERS FOR USING THESE PRODUCTS
More informationMLK1005 Type. Inductors for High Frequency Circuits. MLK Series (For automobiles) Multilayer Ceramic [0402 inch]* January 2015
January 2015 Inductors for High Frequency Circuits Multilayer Ceramic MLK Series (For automobiles) MLK1005 1005 [0402 inch]* * Dimensions Code JIS[EIA] (2/10) REMINDERS FOR USING THESE PRODUCTS Before
More informationMLG1608 Type. Inductors for High Frequency Circuits. Caution. MLG Series (For automobiles) Multilayer Ceramic [0603 inch]* December 2015
December 2015 Inductors for High Frequency Circuits Multilayer Ceramic MLG Series (For automobiles) MLG1608 1608 [0603 inch]* * Dimensions Code JIS[EIA] Caution Nov.4, 2015 Dec.29, 2016 Jan.30, 2017 (2/12)
More informationSeptember Inductors for High Frequency Circuits. Multilayer Ceramic. MLG-Q, MLG-Pseries. * Dimensions Code JIS[EIA]
September 2014 Inductors for High Frequency Circuits Multilayer Ceramic MLG-Q, MLG-Pseries MLG0402P MLG0402Q MLG0603P 0402 [01005 inch]* 0402 [01005 inch] 0603 [0201 inch] * Dimensions Code JIS[EIA] (2/38)
More informationJuly Inductors for High Frequency. Multilayer Ceramic. MLG series. * Dimensions Code JIS[EIA]
July 2013 Inductors for High Frequency Multilayer Ceramic MLG series MLG0603S MLG1005S MLG1608 0603 [0201 inch]* 1005 [0402 inch] 1608 [0603 inch] * Dimensions Code JIS[EIA] (1/23) REMINDERS FOR USING
More informationVLS-E series. Inductors for Power Circuits. Wound Ferrite
May 2013 Inductors for Power Circuits Wound Ferrite VLS-E series VLS201610E VLS201612E VLS2010E VLS2012E VLS252008E VLS252010E VLS252012E VLS252015E VLS3010E VLS3012E VLS3015E VLS4012E (1/52) REMINDERS
More informationOctober Isolator. Drop-in. CU1L2581 Series
R F C o m p o n e n t s October 2015 Isolator Drop-in Isolator Drop-in Product compatible with RoHS directive Overview of PART NUMBER CONSTRUCTION CU1L2581 T - - Series name A B Direction CW CCW Center
More informationMULTILAYER CERAMIC CHIP CAPACITORS
April 2018 Commercial grade, Soft termination (Low resistance type) CNC series CNC5 CNC6 3216 [1206 inch] 3225 [1210 inch] * Dimensions code: JIS[EIA] (2/6) REMINDERS FOR USING THESE PRODUCTS Before using
More informationMULTILAYER CERAMIC CHIP CAPACITORS
April 2018 Automotive grade, Soft termination (Low resistance type) CNA series CNA5 CNA6 3216 [1206 inch] 3225 [1210 inch] * Dimensions code: JIS[EIA] (2/6) REMINDERS FOR USING THESE PRODUCTS Before using
More informationCAPACITORS. February Ultra high voltage ceramic capacitors. With metal terminals For high voltage power supplies/lasers.
February 2017 Ultra high voltage ceramic capacitors With metal terminals For high voltage power supplies/lasers (2/5) REMINDERS FOR USING THESE PRODUCTS (1) During transportation and storage Do not transport
More informationMULTILAYER CERAMIC CHIP CAPACITORS
October 2017 Automotive Grade, General (Up to 50V) CGA series CGA1 CGA2 CGA3 CGA4 CGA5 CGA6 CGA8 CGA9 0603 [0201 inch] 1005 [0402 inch] 1608 [0603 inch] 2012 [0805 inch] 3216 [1206 inch] 3225 [1210 inch]
More informationMULTILAYER CERAMIC CHIP CAPACITORS
August 2017 Automotive Grade, Soft Termination CGA series CGA2 CGA3 CGA4 CGA5 CGA6 CGA7 CGA8 CGA9 CGAD 1005 [0402 inch] 1608 [0603 inch] 2012 [0805 inch] 3216 [1206 inch] 3225 [1210 inch] 4520 [1808 inch]
More informationCAPACITORS. February Ultra high voltage ceramic capacitors. With metal terminals For distribution lines. FD/MD series
February 2017 Ultra high voltage ceramic capacitors With metal terminals For distribution lines FD/MD series (2/6) REMINDERS FOR USING HESE PRODUCS (1) During transportation and storage Do not transport
More informationMULTILAYER CERAMIC CHIP CAPACITORS
August 2017 Commercial Grade, Soft Termination C series C1005 C1608 C2012 C3216 C3225 C4520 C4532 C5750 C7563 [0402 inch] [0603 inch] [0805 inch] [1206 inch] [1210 inch] [1808 inch] [1812 inch] [2220 inch]
More informationAML series. Caution. Choke coil for DC motors EMC. Products in this catalog are in preparation for mass production.
May 207 hoke coil for motors M M series M03 M04 M04 M05 M06 M08 M09 M0 M3 aution Products in this catalog are in preparation for mass production. (2/3) RMINRS OR USING THS PROUTS efore using these products,
More informationJuly terminal Filters. For Large-current Power Line. YFF-HC Series [1206 inch]* Feed through filter. * Dimensions Code JIS[EIA]
E M C C o m p o n e n t s July 215 3-terminal Filters For Large-current Power Line YFF31HC 3216 [126 inch]* Feed through filter * Dimensions Code JIS[EIA] (1/4) 3-terminal Filters For Large-current Power
More informationInductors for High-frequency Circuits
Inductors for High-frequency Circuits Multilayer/STD MLG series Type: MLG0603S MLG1005S MLG1608 0603[0201 inch]* 1005[0402 inch] 1608[0603 inch] * Dimensions Code JIS[EIA] Issue date: November 2011 Conformity
More informationSPECIFICATION. Part No. : GW
SPECIFICATION Part No. : GW.71.13 Product Name : 2.4GHz/.8GHz Dipole Antenna for ISM Band and WLAN IEEE 82.11a/b/g/h Feature : dbi High Performance Antenna RP-SMA(M) Hinged Antenna RoHS Compliant SPE-11-8-12/C
More informationNov 7, 2006 DIELECTRIC CERAMIC FILTER SPECIFICATION 1 OF 9 SPECIFICATION ITEM: DIELECTRIC CERAMIC FILTER PART NUMBER: CF
Nov 7, 2006 DIELECTRIC CERAMIC FILTER SPECIFICATION 1 OF 9 SPECIFICATION ITEM: DIELECTRIC CERAMIC FILTER PART NUMBER: CF-19100328 4/14/06 Added recommended PCB layout and plots. 6/2/06 Added Tape and Reel
More informationSpecification Status: Released
PAGE NO.: 1 of 9 Specification Status: Released BENEFITS ESD protection for high frequency applications (HDMI 1.3) Smaller form factor for board space savings Helps protect electronic circuits against
More informationSpecification Status: Released
PAGE NO.: 1 OF 9 Specification Status: Released BENEFITS ESD protection for high frequency applications (HDMI 1.3) Smaller form factor for board space savings Helps protect electronic circuits against
More informationCUSTOMER'S PRODUCT NAME TDK PRODUCT NAME 3-terminal Feed Through Filter Tape packaging RoHS compliant YFF15,YFF18,YFF21,YFF31 Type
DELIVERY SPECIFICATION SPEC. No. C-YFF-d D A T E : 2018, Aug. To Non-Controlled Copy Upon the acceptance of this spec. previous spec. (C2011-0454) shall be abolished. CUSTOMER'S PRODUCT NAME TDK PRODUCT
More informationGAS DISCHARGE TUBES (GDTS)
GAS DISCHARGE TUBES (GDTS) Littelfuse's GDTs (Gas Discharge Tubes) are placed in front of, and in parallel with, sensitive telecom equipment such as power lines, communication lines, signal lines and data
More informationSolidMatrix 1206 Fast Acting Surface Mount Fuses
SolidMatrix 206 Fast Acting Surface Mount Fuses Features: Multilayer monolithic structure with glass ceramic body and silver fusing element Silver termination with nickel and pure-tin solder plating, providing
More informationMetal-Oxide Varistors (MOVs) Surface Mount Multilayer Varistors (MLVs) > MLN Series. MLN SurgeArray TM Suppressor. Description
MLN SurgeArray TM Suppressor RoHS Description The MLN SurgeArray Suppressor is designed to help protect components from transient voltages that exist at the circuit board level. This device provides four
More informationType AHA SMT Aluminum Electrolytic Capacitors -55 C to +105 C - Long Life
Long Life Filtering, Bypassing, Power Supply Decoupling Capacitors deliver twice the life of many SMT aluminum capacitor types, and they handle high levels of ripple current. The AHA can handle the ripple
More informationWLCW1608 SMD Wire Wound Ceramic Chip Inductors
WLCW1608 SMD Wire Wound Ceramic Chip Inductors *Contents in this sheet are subject to change without prior notice. Page 1 of 7 ASC_WLCW1608 Series_V7.0 Jun. 2017 Features 1. Standard chip size bobbin with
More informationReference Only. 1. Scope This reference specification applies to LQM2MPN_G0L series, Chip Coil (Chip Inductors).
Spec No. JELF243B-22L-1 P1/9 CHIP COIL (CHIP INDUCTORS) LQM2MPN GL REFERENCE SPECIFICATION 1. Scope This reference specification applies to LQM2MPN_GL series, Chip Coil (Chip Inductors). 2. Part Numbering
More informationApproval sheet. WLCW1608HQ SMD Wire Wound Ceramic Chip Inductors (High Q) *Contents in this sheet are subject to change without prior notice.
WLCW1608HQ SMD Wire Wound Ceramic Chip Inductors (High Q) *Contents in this sheet are subject to change without prior notice. Page 1 of 7 ASC_WLCW1608HQ Series_V3.0 Jun. 2017 Features 1. Standard chip
More informationApplications. Car audio. Robo
Rotary Position Sensor High Rotational Life Type Features High Durability: 1M cycles Pb Free Soldering: 260 C Operating Temperature: -40 C to +85 C Terminal Shape: SMD Type and Lead Type Rotational Rotor:
More informationNotice for TAIYO YUDEN Products
Notice for TAIYO YUDEN Products [ For General Electronic Equipment (General Environment) ] Please read this notice before using the TAIYO YUDEN products. REMINDERS Product information in this catalog is
More informationMulti-Layer Power Inductors (IP_L Series)
Multi-Layer Power Inductors (IP_L Series) For Choke Application ORDERING CODE IP 2012 2R2 M P L 9 PRODUCT CODE IP : Multilayer Power Inductor (Lead Free) DIMENSION (L X W) Code Dimension EIA 1608 1.6 x
More informationReference Only. Inductance Frequency (μh) Tolerance Typ Max (MHz min.) 85 *
P.1/10 CHIP COIL (CHIP INDUCTORS) LQM2HPN G0L REFERENCE SPECIFICATION 1. Scope This reference specification applies to LQM2HPN_G0 series, Chip Coil (Chip Inductors). 2. Part Numbering (ex) LQ M 2H P N
More informationContent (RF Inductors) Multi-Layer High Frequency Inductors (IQ & HI Series) Cautions... 18
Content (RF Inductors) Multi-Layer High Inductors (IQ & HI Series)... 2 Ordering Code... 2 Standard External Dimensions... 3 High Q Type (IQ Series)... 4 Standard Type (HI Series)... 5 Testing Condition
More informationWirewound Chip Inductors
EATURES CERAMIC BODY, WIRE WOUND CHIP INDUCTOR SIZES K (0402) and J (0603) RoHS Compliant includes all homogeneous materials HIGH CURRENT AND LOW *See Part Number System for Details RELOW SOLDERING APPLICABLE
More informationSurface Mount Aluminum Electrolytic Capacitors
FEATURES CYLINDRICAL V-CHIP CONSTRUCTION LOW COST, GENERAL PURPOSE, 2000 HOURS AT 85 O C NEW EXPANDED CV RANGE (up to 6800μF) ANTI-SOLVENT (2 MINUTES) DESIGNED FOR AUTOMATIC MOUNTING AND REFLOW SOLDERING
More information2920L Series. POLY-FUSE Resettable PTCs. Surface Mount > 2920L Series. Description
RoHS Description The PTC provides surface mount overcurrent protection for medium voltage ( 60V) applications where resettable protection is desired. Features RoHS compliant, lead-free and halogen-free
More informationSurface Mount Aluminum Electrolytic Capacitors
FEATURES CYLINDRICAL V-CHIP CONSTRUCTION FOR SURFACE MOUNTING VERY LOW IMPEDANCE & HIGH RIPPLE CURRENT AT 100KHz SUITABLE FOR DC-DC CONVERTER, DC-AC INVERTER, ETC. NEW EXPANDED CV RANGE, UP TO 6800μF NEW
More informationReference Only. *B: Bulk packing also available. Inductance. Tolerance M:±20% N:±30% 0.150±25% 1.0 * * N:±30% 0.23±25% 0.8 *2 0.
CHIP COIL (CHIP INDUCTORS) LQM21PN GRD REFERENCE SPECIFICATION P.1/9 1. Scope This reference specification applies to LQM21PN_GR series, Chip Coil (Chip Inductors). 2. Part Numbering (ex) LQ M 21 P N 1R
More informationHigh Frequency Winding Type LQW15A/LQW18A Series. Rated Current (ma)
Chip Coils High Frequency Winding Type LW15A/LW18A Series LW15A_00 Series The LW15A series consists of air core chip coil using a miniature alumina core. The tight inductance tolerance (+0.2nH, +%) is
More informationPOLYFUSE Resettable PTCs Surface Mount > 2920L Series
Surface Mount > Description The PTC provides surface mount overcurrent protection for medium voltage ( 60V) applications where resettable protection is desired. Features Agency Approvals AGENCY AGENCY
More informationPower Splitter/Combiner
Ultra-Small Ceramic Power Splitter/Combiner 2 Way-90 50Ω 2500 to 4500 MHz Maximum Ratings Operating Temperature -55 C to 100 C Storage Temperature -55 C to 100 C Power Input (as a splitter) 15W* max. *
More informationMHz Filter
Applications Broadband tuners DOCSIS 3.0 gateways DOCSIS 3.0 cable modems SMP12D 3.00 x 3.00 x 1.22 mm Product Features Usable bandwidth 100 MHz High attenuation Balanced operation Small Size: 3.00 x 3.00
More informationG6K. Surface Mounting Relay with the World s Smallest Mounting Area. Application Examples. Model Number Legend. Ordering Information
with the World s Smallest Mounting Area Subminiature model as small as.2 (H). (W) (L) mm is ideal for high-density mounting ((U)-2F(-Y)). Low profile of.2 mm improves mounting efficiency ((U)-2F(-Y)).
More informationNotice for TAIYO YUDEN Products
Notice for TAIYO YUDEN Products [ For General Electronic Equipment (General Environment) ] Please read this notice before using the TAIYO YUDEN products. REMINDERS Product information in this catalog is
More informationApplications MDS K 50 A52 P3 TUBE. Capacitance Tolerance J = ±5 K = ±10% Other tolerances on request. F 17 3 A A 333 K 050 T
MDS, Dual In-Line Low Profile, 50 630, High Current Overview Dual in-line (DIL) metallized polyester (PET) film capacitor is encapsulated in a self-extinguishing material, meeting the requirements of UL
More informationSurface Mount Aluminum Electrolytic Capacitors NACEW Series
FEATURES CYLINDRICAL V-CHIP CONSTRUCTION WIDE TEMPERATURE -55 ~ +105 O C DESIGNED FOR REFLOW SOLDERING MEETS THE REQUIREMENTS OF AEC-Q200* *Contact NIC for supporting test data CHARACTERISTICS Rated Voltage
More informationShock Sensor Specification. Part No. : PSLE382E-R44. RoHS Compliant. Halogen-Free Compliant. 16.Dec KYOCERA CORPORATION
EQM08-4KC-F5AS102-00 Messrs. Shock Sensor Specification Part No. : PSLE382E-R44 RoHS Compliant Halogen-Free Compliant 16.Dec. 2010 Approved by Checked by Issued by Kazuki Shimizu Yasuhiro Nakai Akira Oikawa
More informationFixed Inductors (Chip Inductors) 2. High Frequency Use High-Q (Non Magnetic Core) QF, QE
2. High requency Use High- (Non Magnetic Core), E eatures Capable of being Re-fl ow or fl ow soldered. Unique Ceramic Core/Laser-cut Technology. Non polarity product. High self resonance frequency. Good
More informationThin-Film Directional Couplers
6 High Directivity LGA Termination GENERAL DESCRIPTION ITF (Integrated Thin-Film) TECHNOLOGY The ITF LGA Coupler is based on thin-film multilayer technology. The technology provides a miniature part with
More informationApproval sheet. WLCM0603 WLCM1005 Multi-Layer Ceramic High Frequency Inductors. *Contents in this sheet are subject to change without prior notice.
WLCM0603 WLCM1005 Multi-Layer Ceramic High Frequency Inductors *Contents in this sheet are subject to change without prior notice. Page 1 of 11 ASC_WLCM Series_V7.0 Jul. 2017 FEATURES 1. Ceramic structure
More informationTechnical Support: Voltage Capacitance Alternate Suggested Replacement Part Numbers NPC101M2D5ZATRF 2VDC 100uF
www.niccomp.com/pcn Technical Support: tpmg@niccomp.com October 28 th 2016 SUB: EOL End of Life Notification Products impacted by this notice: NPC Series SMT Solid Polymer Aluminum Electrolytic Capacitors
More informationDatasheet RS Pro AL Series Wire-wound SMD Inductor with a Ceramic Core, 4.7 nh ±0.1nH Wire-Wound 320mA Idc Q:13 RS Stock No:
Datasheet RS Pro AL Series Wire-wound SMD Inductor with a Ceramic Core, 4.7 nh ±0.1nH Wire-Wound 320mA Idc Q:13 RS Stock No: 763-1434 Product Details RS Pro SMD inductor offers an inductance of 4.7 nh
More informationSPECIFICATION FOR APPROVAL
SPECIFICATION FOR APPROVAL CUSTOMER CUSTOMER P/N OUR DWG No Lead-Free & RoHs Compliance!! QUANTITY Pcs. DATE 2010/11/01 ITEM SBK160808T-121Y-N COMPONENT ENGINEER ELECTRICAL ENGINEER MECHANICAL ENGINEER
More informationMetal Oxide Varistor:TVM-B Series
Features 1. RoHS compliant 2. High surge suppress capability 3. EIA size 0402 ~ 2220 4. Operating voltage: 5.5 ~ 85 Vdc 5. Bidirectional and symmetrical V/I characteristics 6. Multilayer ceramic construction
More informationYAGEO CORPORATION Lead-Free & RoHs Compliance!!
Lead-Free & RoHs Compliance!! SPECIFICATION FOR APPROVAL CUSTOMER: CUSTOMER P/N: OUR DWG No: QUANTITY: Pcs. DATE: ITEM: PBY321611T-SERIES-N SPECIFICATION ACCEPTED BY: COMPONENT ENGINEER ELECTRICAL ENGINEER
More informationPOLYFUSE Resettable PTCs Surface Mount > 2920L Series
Surface Mount > Description The device provides surface mount overcurrent protection for medium voltage ( 60V) applications where resettable protection is desired. Features Agency Approvals AGENCY AGENCY
More informationDear Customer, Terms & Conditions for last Time Buy. Best Regards. Meng Wang. Product Manager, Tel: EXT 7955
Littelfuse, Inc. 8755 West Higgins Road, Suite 5 Chicago, IL 6631 USA (773) 628-1 7.1,218 RE: LFPCN41214 From: Littelfuse Product Management Team Dear Customer, Please be aware that Littelfuse is discontinuing
More informationMultilayer Chip Inductor-CL Series
Multilayer Chip Inductor-CL Series Construction A L 5 4 T 1 3 2 W 1 Ceramic Material 3 Inner Electrode (Ag) 5 Direction Mark 2 Through Hole 4 End-termination (Ag/Ni/Sn) Features -A ceramic material construction
More informationRatings 0402 inch size : Type ERBRD ERBRD R X 0R25 0R3 0R37 0R50 0R75 R00 R25 R50 2R00 2R50 3R00 Rated Current (A)
Micro Chip Fuse Type: ERBRD Features Small size Fast-acting and withstanding in-rush current characteristics RoHS compliant Approved Safety Standards UL248-4 : File No.E94052 c-ul C22.2 No.248-4 : File
More informationRF Type 5 (04) Dimensions in mm (not to scale) Recommended Land Pattern in mm (not to scale) 0.2± ± ± ±0.05 Standard Packing uantit
Chip Inductors High Frequency Use (Non Magnetic Core) Type: ELJRF ELJRE Features High frequency capability due to its non magnetic core. Capable of being Re-fl ow or fl ow soldered. Unique Ceramic Core/Laser-cut
More informationGas Discharge Tubes SL1002A Series
SL12A Series SL12A Series RoHS Agency Approvals AGENCY AGENCY FILE NUMBER E128662 2 Electrode GDT Graphical Symbol Additional Information Description The Broadband Optimized SL12A series has been especially
More informationNotice for TAIYO YUDEN Products
Notice for TAIYO YUDEN Products [ For General Electronic Equipment (General Environment) ] Please read this notice before using the TAIYO YUDEN products. REMINDERS Product information in this catalog is
More information74 ( ) 127 ( ) A [0,315] 2,20 [0,079] [0,087] 1,60 [0,063] Land Pattern
A FEATURES Shielded Construction with very low DCR Heating Current rating up to 17.9 Amps Saturation Current rating up to 7.5 Amps (based on only 10% inductance drop) Inductance up to 1mH for all case
More informationGas Discharge Tube (GDT) Products CG/CG2 Series. CG/CG2 Series
Description Littelfuse highly reliable GDTs provide a high degree of surge protection in a small size ideal for board level circuit protection. GDTs function as switches which dissipate a minimum amount
More informationTactile Switch. Ordering Information. A Wide Range of Models: 6 x 6 mm, 12 x 12 mm, Vertical, and High-force.
Tactile Switch A Wide Range of Models: 6 x 6 mm, 1 x 1 mm, Vertical, and High-force. A positive click action plus a long life equal to that of a no-contact switch. Radial models (taping specifications)
More informationReference Only. Spec.No. JENF243H-0008M-01 P 1/ 14. Rated Current. Withstanding Voltage 20A 125V (DC) (DC) 250V (DC) 20A (DC) 20A 40V (DC) (DC) (DC)
Spec.No. JENF243H-0008M-01 P 1/ 14 SMD Block Type EMIFIL BNX02-01 Reference Specification 1.Scope This reference specification applies to SMD Block Type EMIFIL. 2.Part Numbering BN X 022-01 L Product ID
More informationINPAQ. Specification. MCB & MHC W Series. Product Name Multilayer Chip Ferrite Bead Series MCB & MHC W Series Size EIAJ 1005/1608/2012/3216/4516
MCB & MHC W Series Specification Product Name Multilayer Chip Ferrite Bead Series MCB & MHC W Series Size EIAJ 1005/1608/2012/3216/4516 RoHS Pb Chip Ferrite Bead for Automotive Engineering Spec. Qualified
More informationModel C2023J5003A00. Ultra Low Profile db, 90 Hybrid Coupler
Model C223J53A Ultra Low Profile 85 3 db, 9 Hybrid Coupler Description The C223J53A is a low cost, low profile sub-miniature high performance 3 db coupler in an easy to use surface mount package. It is
More informationCHIPSESD DEVICES BENEFITS APPLICATIONS FEATURES
CHIPSES EVICES Littelfuse s ChipSES family of Silicon ES devices, available in EIA-0201 and EIA-0402 sized rectangular SMT passive component packages, can help protect electronic circuits against damage
More informationSurface Mount Multilayer Ceramic Chip Capacitors for High Reliability Applications
Surface Mount Multilayer Ceramic Chip Capacitors for High Reliability Applications ELECTRICAL SPECIFICATIONS FEATURES Manufactured with a combination of design, materials and tight process control to achieve
More informationMetal-Oxide Varistors (MOVs) Surface Mount Multilayer Varistors (MLVs) > MLA Automotive Series
MLA Automotive Varistor Series RoHS Description The MLA Automotive Series of transient voltage surge suppression devices is based on the Littelfuse Multilayer fabrication technology. These components are
More informationMultilayer Acrylic Polymer Film Capacitors
FEATURES HIGH CAPACITANCE (UP TO 22μF) WIDE VOLTAGE & TEMPERATURE RANGE (16 ~ 100V, -55 C ~ +125 C or ±105 C) UPGRADE PERFORMANCE VS. MLCC's STABLE OVER FREQUENCY, TEMPERATURE & VOLTAGE NO PIEZO ELECTRIC
More informationFeatures. P d typ. (W) I max (A) 1206L012 A X X 1206L016 B
RoHS Description The PTC provides surface mount overcurrent protection for applications where space is at a premium and resettable protection is desired. Features Agency Approvals AGENCY AGENCY FILE NUMBER
More informationApplications MDC K 50 A52 P3 TUBE. Capacitance Tolerance. J = ±5 K = ±10% Other tolerances on request. F 15 3 A A 333 K 050 T
Overview Dual in-line (DIL) metallized polyester (PET) film capacitor for surface mounting. Encapsulation in self-extinguishing material meeting the requirements of UL 94 V 0. Applications Typical applications
More informationGHz Standard Performance Dual Pole Parabolic Reflector Antenna
5.25-5.85 GHz Standard Performance Dual Pole Parabolic Reflector Antenna Standard Performance Dual Pole Parabolic Reflector Antennas from Cambium Networks are well suited for deployment with any of the
More informationSMD B 15-22/R6G6C-A32/2T
Features Package in 8mm tape on 7 diameter reel. Compatible with automatic placement equipment. Compatible with infrared and vapor phase reflow solder process. Multi-color type. Pb-free. The product itself
More information15-22/R6G6C-A32/2T SMD B
Features Package in 8mm tape on 7 diameter reel. Compatible with automatic placement equipment. Compatible with infrared and vapor phase reflow solder process. Multi -color type. Pb-free. The product itself
More informationDatasheet RS Pro RS Series Thick Film Surface Mount Resistor 0402 Case 402Ω ±1% 0.063W ±100ppm/ C RS Stock No:
Datasheet RS Pro RS Series hick Film Surface Mount Resistor 0402 Case 402Ω ±1% 0.063 ±100ppm/ C RS Stock No: 716-8721 Product Details RS Pro 0402 thick film surface mount resistor with ±1% tolerance, provides
More information17-223/R6G6C-D30/3C SMD B
Features Package in 8mm tape on 7 diameter reel. Compatible with automatic placement equipment. Compatible with infrared and vapor phase reflow solder process. Mono-color type. Pb-free. The product itself
More informationReference Only. Spec No. JELF243C-0023D-01. This reference specification applies to LQP02HQ series, Chip coil (Chip Inductors).
P.1/16 CHIP COIL (CHIP INDUCTORS) LQP02HQ 02 Reference Specification 1.Scope This reference specification applies to LQP02HQ series, Chip coil (Chip Inductors). 2.ing (ex) LQ P 02 H Q 0N4 W 0 2 L Product
More informationSurface Mount Aluminum Electrolytic Capacitors
FEATURES CYLINDRICAL V-CHIP CONSTRUCTION FOR SURFACE MOUNTING AVAILALE ITH ANTI-VIRATION IDE TERMINATIONS VERY LO IMPEDANCE & HIGH RIPPLE CURRENT AT 100KHz EXTENDED LOAD LIFE (2,000 ~ 5,000 HOURS @ +105
More information