Catalogue For Metal Alloy Inductor

Transcription

1 Catalogue For Metal Alloy Inductor Features A coil embedded inductor with magnetic metal alloy powder. Shielded construction. Superior DC current characteristics, suitable for large current application. Low loss realized with low DC resistance. Ultra low buzz noise. Lead free and RoHS cohmpliant. Application Ideal for DC/DC converters in personal computer, notebook PC, VTR and Set top box etc.. High current POL converters. DC/DC converters in other portable game devices, Communication equipment and Office automation electronic equipment. Part Numbering HMPL(F) R22 M T 1 product Type code Coil Code HMPL A B F Power Inductor 2 Product Dimensions(L W)( mm) Product height (H) ( mm) Nominal Example Nominal Value R μh 1R0 1.0 μh μh μh μH(1mH) μH(10 mh) 4 J ±5% K ±10% L ±15% M ±20% N ±30% 5Package T Tape & Reel

2 List of Metal Alloy Inductors series HMPLF0420 HMPLF0520 HMPLF0530 HMPLF0540 HMPLF0620 HMPLF0624 HMPLF0630 HMPLF0640 HMPLB1040 HMPLF1040 HMPLB/F1250 HMPLB/F1260 Dimension W x L x T (mm) 4.0x 4.3 x x 5.5 x x 5.5 x x 5.5 x x 7.3 x x 7.3 x x 7.3 x x 7.3 x x11.0 x x11.0 x x14.0 x x13.7 x 6.0 Saturation Heat Rating DCR Range Current Current Range (μh) (mω) Isat (A) Irms (A) 0.47 ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~38.0 Notes is measured with a Q meter LCR meter or an impedance analyzer. Test frequency:l:100khz/1.0v; DC resistance is measured with a digital DCR analyzer; Saturation current(isat)that will cause L 0 to approximately drop 20%. Heat rating current (Irms) that will cause a temperature rise T of 40 approximately. Withstand voltage: 30 V DC. Operating temperature range - 55 C to C. Please contact us before using our products for other conditions. 2

3 Electrical Characteristics HMPLB/F 1260 Series resistance Saturation Heat rating HMPLB1260-R ±20% HMPLB1260-1R ±20% HMPLB1260-1R ±20% HMPLB1260-2R ±20% HMPLF1260-3R ±20% HMPLF1260-4R ±20% HMPLF1260-5R ±20% HMPLF1260-6R ±20% HMPLF1260-8R ±20% HMPLF ±20% HMPLF ±20% HMPLF ±20% HMPLF ±20% HMPLF ±20% HMPLF ±20% HMPLF ±20% HMPLF ±20% HMPLF ±20% HMPLF ±20%

4 HMPLB/F 1250 Series HMPLB1250-R ±20% HMPLB1250-R ±20% HMPLB1250-R ±20% HMPLB1250-R ±20% HMPLF1250-3R ±20% HMPLB 1040 Series HMPLB1040-R ±20% HMPLB1040-R ±20% HMPLB1040-R ±20% HMPLB1040-R ±20% HMPLB1040-R ±20% HMPLB1040-R ±20% HMPLB1040-1R ±20% HMPLB1040-1R ±20%

5 HMPLF 1040 Series HMPLF1040-2R ±20% HMPLF1040-3R ±20% HMPLF1040-4R ±20% HMPLF1040-6R ±20% HMPLF1040-8R ±20% HMPLF ±20% HMPLF ±20% HMPLF ±20% HMPLF ±20% HMPLF ±20%

6 HMPLF 0630 Series HMPLF0630-R ±20% HMPLF0630-R ±20% HMPLF0630-R ±20% HMPLF0630-R ±20% HMPLF0630-R ±20% HMPLF0630-1R ±20% HMPLF0630-1R ±20% HMPLF0630-2R ±20% HMPLF0630-3R ±20% HMPLF0630-4R ±20% HMPLF0630-6R ±20% HMPLF0630-8R ±20% HMPLF ±20% HMPLF ±20% HMPLF ±20%

7 HMPLF 0624 Series Electrical Characteristic HMPLF0624-2R ±20% HMPLF0624-3R ±20% HMPLF0624-4R ±20% HMPLF0624-6R ±20% HMPLF ±20% HMPLF 0620 Series HMPLF0620-1R ±20% HMPLF0620-1R ±20% HMPLF0620-2R ±20% HMPLF0620-3R ±20% HMPLF0620-4R ±20% HMPLF0620-6R ±20%

8 HMPLF 0640 Series HMPLF0640-1R ±20% HMPLF0640-2R ±20% HMPLF0640-3R ±20% HMPLF0640-4R ±20% HMPLF ±20% HMPLF ±20% HMPLF 0540 Series HMPLF0540-4R ±20% HMPLF0540-6R ±20% HMPLF ±20%

9 HMPLF 0530 Series HMPLF0530-1R ±20% HMPLF0530-1R ±20% HMPLF0530-2R ±20% HMPLF0530-3R ±20% HMPLF0530-4R ±20% HMPLF 0520 Series HMPLF0520-R ±20% HMPLF0520-R ±20% HMPLF0520-R ±20% HMPLF0520-1R ±20% HMPLF0520-1R ±20% HMPLF0520-2R ±20%

10 HMPLF 0420 Series HMPLF0420-R ±20% HMPLF0420-1R ±20% HMPLF0420-1R ±20% HMPLF0420-2R ±20% HMPLF0420-3R ±20% HMPLF0420-4R ±20% Reliability and test condition NO. Item Performance Test condition 1 Humidity Resistance Appearance: no damage : within±10%of initial value Humidity:90-95%RH. Temperature:40±5 Duration:500±12h. Measured at room temperature after placing for 2 to 3h. Frequency:10-55Hz for 1 min AHMPLitude:1.5mm. 2 Random Appearance: cracking, shipping and any Directions and times: X,Y,Z Vibration Test other defects harmful to the characteristics should not be allowed. directions for 2h. A period of 2h in each of 3 Impedance: within ±10%. mutually perpendicular directions(total 6h) 3 High Temperature Life Test Appearance: no damage : within±10%of initial value Temperature: +85 ±2 Duration:500±12h. Measured at room temperature after placing for 2 to 3h Temperature: -40±2 Low Appearance: no damage Duration:500±12h. 10

11 台灣歆亞科技股份有限公司 4 Temperature Life Test : within±10%of initial value Measured at room temperature after placing for 2 to 3h Condition for 1 cycle Step 1: -40±3 30±3min. Step 2: Room temperature. Thermal Appearance: no damage within 3min. 5 Shock : within±10%of initial value Step 3: +85±3 30±3min. Step 4: Room temperature within 3min. Number of cycles: 100 Measured at room temperature after placing for 2 to 3h 6 Solder Heat Resistance Appearance: no significant abnormality. change: within±10%. Preheat: 150,60sec. Solder:Sn-Cu0.5% Solder temperature:260±5 Flux: resin Dip time: 10±0.5sec. 7 Solderability Test More than 95% of the terminal electrode Should be covered with solder. Dip pads in flux then dip in solder pot at ( ) for 5 sec. Flux: rosin flux 8 PCB Bend Strength Appearance: no damage : within±10%of initial value PCB thickness: 1.6mm Bend: 2mm,5sec. 11