Power Inductors. Type 3622 Series. Type 3622 Series. Electrical Characteristics A Series. Key Features
|
|
- Janice Potter
- 5 years ago
- Views:
Transcription
1 The 3622 Series is an innovative design for a high power SMD choke. It combines Tyco quality with low price and high long-term reliability. The layout and profile make it a highly appropriate component for modern industrial equipment, power supplies, bench test instruments, and automotive requirements where long life and high reliability are key design requirements. Inductance Inductance Tolerance S.R.F. R.D.C. Isat Irms Code (µh) (%) (MHz) Typ. (Ω) Max. (A) (A) 1R R R R R R Key Features Low Profile Construction Wide Value Range Isat up to 30A Irms up to 10A Rapid Response Taped and Reeled Available in 4 sizes Rated Current: DC Current base on temp. rise & ΔL/L=10% typ. 15 C typ. Series A B C E F G H I J K 3622A 6.6 max max max typ typ typ ref ref ref ref. are shown for are in passives.
2 Inductance Inductance Tolerance R.D.C. Irms Isat Code (µh) (%) (Ω) Max. (A) Max. (A) Typ. 3R R R C max. 3622B 8.0± ± ± ± ± ± ref. 2.2 ref. 2.4 ref. are shown for are in passives.
3 Inductance Inductance (µh) Tolerance R.D.C. S.R.F. Isat Irms Code 0.1 V / 100 KHz (%) (Ω) Max. (MHz) Typ. (A) (A) 1R R R R R R C typ. 3622C 10.0± ± ± ± ± ± ref. 2.8 ref. 3.0 ref. are shown for are in passives.
4 Inductance Inductance Tolerance S.R.F. R.D.C. Irms Isat Code (µh) (%) (MHz) Typ. (Ω) Max. (A) (A) 1R R R R C max. 3622D 14.0± ± ± ± ± ± ref. 2.9 ref. 3.2 ref. are shown for are in passives.
5 A Series Thermal Shock Test: ΔL/L ±30% Room Temp. -25± 2 C Humidity Resistance Test: ΔL/L ±30% Temperature: 40± 2 C High Temp. Resistance Test: ΔL/L ±30% Temperature: 85± 2 C B Series Thermal Shock Test: ΔL/L ±20% Room Temp. -25± 2 C Humidity Resistance Test: ΔL/L ±20% Temperature: 40± 2 C High Temp. Resistance Test: ΔL/L ±20% Temperature: 105± 2 C C, D Series Thermal Shock Test: ΔL/L ±20% Room Temp. -25± 2 C Humidity Resistance Test: ΔL/L ±20% Temperature: 40± 2 C High Temp. Resistance Test: ΔL/L ±20% Temperature: 105± 2 C How to Order 3622 A 1R0 K Common Part Style Inductance Tolerance K - ±10% 3622 A, B, C, or D See Relevant Table for Inductance Code L - ±15% M - 20% are shown for are in passives.
SMD Power Inductors. Type 3624 Series. Type 3624 Series. Electrical Characteristics A Series. Environmental Characteristics A Series
The 3624 series unique design allows for a range of products which give not only a high current rating, but minimizes the board space required for this product. Tyco Sigma quality, matched with reliability
More informationCOMPACT SHIELDED SMD POWER INDUCTOR FOR AUTOMOTIVE
FEATURES APPLICATIONS High reliability wire-wound construction Shielded construction reduces EMI Automotive grade power inductor TS-16949 qualified production PPAP level 3 support AEC-Q200 qualified with
More informationCOMPACT SHIELDED SMD POWER INDUCTOR FOR AUTOMOTIVE
FEATURES APPLICATIONS Low profile 3mm height for compact applications Advanced and high reliability wire-wound construction Shielded construction reduces EMI Automotive grade power inductor TS-16949 qualified
More informationPower Inductors - RFB Series
Document 277-1 Power Inductors - RFB Series These low cost power inductors offer a wide range of inductance values, from 2.2 µh to 18 mh. They have an open magnetic construction that gives them high current
More informationPower Inductors RFB Series
Document 277-1 Power Inductors RFB Series Low cost, high current power inductors 2.2 µh to 18 mh inductance range 500 V isolation from winding to core. RFB0810 and RFB1010 have a flame retardant polyolefin
More informationSMD POWER INDUCTORS SELECTION GUIDE
SMD POWER INDUCTORS SELECTION GUIDE Unshielded Inductor Type Item Type Dimension (mm) Inductance (uh) Isat (A) Lead Free P/N. DA SERIES DA42 4.0 4.5 3.0 1.0 ~ 68 0.30 ~ 2.18 DA42NP DA43 4.0 4.5 3.5 1.0
More information2R2. Design Code Design Code M ±20%
Wire Wound SMD Power Inductors WPN Series Operating Temp. : -40 ~+125 (Including self-heating) FEATURES Fe base metal material core provides large saturation current Metallization on ferrite core results
More informationTYPE A B C D A B C BPSC ± ± BPSC ± ±
SMD Shielded Power Inductors Series Series Features RoHS, Halogen Free and REACH Compliance Magnetic shielded Various package size and wide inductance range Applications AP Routers STBs LCD TVs and monitors
More informationWire Wound Chip Inductor (Ferrite)
FEATURES Very strong solderability by reflow soldering, soldering iron or wave soldering Highly accurate dimensions Automated mounting capable Terminals are highly resistant to pull forces Highly resistant
More informationFrelTec GmbH. SMD Power Inductors
GmbH Mathildenstr. 10A 82319 Starnberg Germany 10/12/2011 1/13 GmbH www.freltec.com SPECIFICATION Part Number 107 252010 * G * 100 * M E02 * Type Size Use Value Packing 107 : SMD Power Inductor 252010:
More information74 ( ) 127 ( ) A [0,315] 2,20 [0,079] [0,087] 1,60 [0,063] Land Pattern
A FEATURES Shielded Construction with very low DCR Heating Current rating up to 17.9 Amps Saturation Current rating up to 7.5 Amps (based on only 10% inductance drop) Inductance up to 1mH for all case
More informationINPAQ Global RF/Component Solutions
WIP252012Q ZF Series Specification Product Name Series Power Inductor WIP252012Q ZF Series Size EIAJ 2520 WIP252012Q ZF Series Engineering Specification 1. Feature This specification applies Low Profile
More informationPower Inductor. Non-shielded. PDH Series 2. PD Series 4. PCD Series 7. Packaging Info 10 Environmental Specifications 12
Power Inductor Non-shielded PDH Series 2 PD Series 4 PCD Series 7 Packaging Info 10 Environmental Specifications 12 Tel: 1-888-734-7347 Fax: 919-850-9504 E-mail marketing@seielect.com http://www.seielect.com
More informationYAGEO CORPORATION SMD INDUCTOR / BEADS. LCN Series. Lead-free / For RF Signals / Customer Design
YAGEO CORPORATION SMD INDUCTOR / EADS Wound Chip Inductors High Frequency LCN Series Lead-free / For RF Signals / Customer Design Due to technical expertise of accurately wounding skill,these chip inductors
More informationSPECIFICATION FOR APPROVAL INDEX
SPECIFICATION FOR APPROVAL INDEX COVER PAGE INDEX. 0 SHAPES & DIMENSION. 1 PART NUMBER CODE 2 PRODUCT DETAIL 3-5 REEL DIMENSIONS 6 REEL PACKAGING QUANTITY 6 RELIABILITY TEST AND CONDITIONS 7 RECOMMENDED
More informationPower Inductor. Shielded. PS Series 2. PCS Series 4. PCDR Series 7. PCDS Series. SCDS Series 12. Packaging Info 14. Environmental Specifications
Power Inductor Shielded PS Series 2 PCS Series 4 PCDR Series 7 PCDS Series 10 SCDS Series 12 Packaging Info 14 Environmental Specifications 16 Tel: 1-888-734-7347 Fax: 919-850-9504 E-mail marketing@seielect.com
More informationPower Inductor DIP Type
In EC TYPE series color band are marked for identification. These bands indicate inductance value and tolerance. For values below 0.1uH, Gold indicates the decimal point and the next three bands indicate
More informationPower Inductor DIP Type
PK SERIES PEAKING COIS. Applications:.TVs and Audio equipment..telecommunication devices..personal computer..switching Power Supply..Other noise filter. Shape and Dimensions(Dimensions are in mm) : Item
More information2R2. Design Code M ±20%
Wire Wound SMD Power Inductors WPN Series Operating Temp. : -40 ~+125 (Including self-heating) FEATURES Fe base metal material core provides large saturation current Metallization on ferrite core results
More informationThis specification applies to the Pb Free high current type SMD inductors for
SCOPE: This specification applies to the Pb Free high current type SMD inductors for Warn : This product series can t be used in synchronous rectification circuit that is over 24V. PRODUCT INDENTIFICATION
More informationWLCW1608 SMD Wire Wound Ceramic Chip Inductors
WLCW1608 SMD Wire Wound Ceramic Chip Inductors *Contents in this sheet are subject to change without prior notice. Page 1 of 7 ASC_WLCW1608 Series_V7.0 Jun. 2017 Features 1. Standard chip size bobbin with
More information2R2. 4 Nominal Inductance Packing Tape & Reel. Design Code M ±20%
Wire Wound SMD Power Inductors WPN Series Operating temperature range : -40 ~+125 (Including self-heating) FEATURES Fe base metal material core provides large saturation current Metallization on ferrite
More informationShielded SMD Power Inductor
PCDR 0728 / 0730 / 0732 / 0745 / 1045 PCDR 0628 / 1255 / 1265 / 1275 Features Dimensions Unit:mm -Compact, low profile with low DCR and large current -With magnetically shielded against radiation -Flat
More informationNPI Power Inductors. NPI W Series
FETURES HIGH URRENT, SMLL SIZE (UP TO 8.6 MPS) SURFE MOUNTLE ONSTRUTION HIGH INUTNE (UP TO 1000µH) TPE N REELE FOR UTOMTI INSERTION FOR USE IN / ONVERTERS HRTERISTIS ase Size NPI16W NPI31W NPI34W NPI52W
More informationRF Type 5 (0402) 0.2± ± ± ±0.05 Standard Packing uantity 00 pcs./reel Standard Parts (E12 series) 0.5± to to
1. High Frequency Use (Non Magnetic Core) RF, RE, ND, NC, NA Features High frequency capability due to its non magnetic core. Capable of being Re-fl ow or fl ow soldered. Wide line-up from 5 to 3225 case
More informationSMD Common Mode Choke - CUW Series. CUW Series For USB 2.0, IEEE1394b, LVDS Applications. Product Identification
SMD Common Mode Choke - CUW Series CUW Series For USB 2.0, IEEE1394b, LVDS Applications A full series of common mode choke is designed for excellent noise attenuation with compact sizing for use in wide
More informationMulti-Layer Power Inductors (IP_L Series)
Multi-Layer Power Inductors (IP_L Series) For Choke Application ORDERING CODE IP 2012 2R2 M P L 9 PRODUCT CODE IP : Multilayer Power Inductor (Lead Free) DIMENSION (L X W) Code Dimension EIA 1608 1.6 x
More informationSRP1238A Series - Shielded Power Inductors
*RoHS and AEC-Q COMPLIANT Features Shielded construction Carbonyl powder core High saturation current Inductance range:.1 to 1 µh AEC-Q compliant RoHS compliant* and halogen free** SRP1A Series - Shielded
More informationApproval sheet. WLCW1608HQ SMD Wire Wound Ceramic Chip Inductors (High Q) *Contents in this sheet are subject to change without prior notice.
WLCW1608HQ SMD Wire Wound Ceramic Chip Inductors (High Q) *Contents in this sheet are subject to change without prior notice. Page 1 of 7 ASC_WLCW1608HQ Series_V3.0 Jun. 2017 Features 1. Standard chip
More informationSMD Power Inductor-VLH
SMD Power Inductor-VLH Applications Pagers, Cordless phone. High frequency communication products. Personal computers. Disk drives and computer peripherals. power supply circuits. and rated current ranges
More informationThe ASPIAIG-F series of molded smd power inductors come in a variety of package sizes. The series supports current handling up TOLERANCE M: ±20%
SERIES DESCRIPTION The SPIIG-F series of molded smd power inductors come in a variety of package sizes. The series supports current handling up FETURES PPLICTIONS PPP ready and supported Excellent current
More informationSMD Power Inductor SR0602/SR0603/SR0604 SR0805/SR1006/SR1011/SR1307 Series
SMD Power Inductor SR0602/SR0603/SR0604 SR0805/SR1006/SR1011/SR17 Series CONFIGURATION & DIMENSIONS(m/m) 101 A A FEATURES Excellent solderability and high heat resistance Excellent terminal strength construction
More informationCM45, CM32, CM25, CM20, CM16, CM10 SMT Chip Inductors
*RoHS COMPLIANT 220K Features High resistance to heat and humidity Resistance to mechanical shock and pressure Accurate dimensions for automatic surface mounting Wide inductance range (1.0 nh to 1000 µh)
More informationB Unit: mm TYPE A B C D E F. How to Order KL 1410 M T R60. SEI Type Dimensions Tolerance Packaging Inductance
DIP Power Inductor KL Scope This specification applies to DIP Power Choke. High power Features Magnetic shielded construction for high density board assembly High performance excellent DC current characteristics
More informationSPECIFICATION FOR APPROVAL REF : A PAGE: 1 ABC'S DWG NO. ABC'S ITEM NO. Peak Temp:260 max. Max time above 200 :70sec max.
REF : 20080801- PGE: 1 Ⅰ. CONFIGURTION & DIMENSIONS: B C : 3.80±0.30 B : 3.80±0.30 C : 1.65±0.15 D : 1.30 typ. E : 1.20 typ. G : 1. ref. H : 4.30 ref. I : 1.60 ref. R : 1.30 ref. H D E D R I G I ( PCB
More informationHigh Current Power Inductors HCM1104 Series
High Current Power Inductors HCM1104 Series HALOGEN HF FREE Pb SMD Device Description Halogen free, lead free, RoHS compliant 125 C maximum total operating temperature 11.5x 10.3 x 4.0mm maximum surface
More informationWLFI1608 Ferrite Chip Inductors
WLFI1608 Ferrite Chip Inductors *Contents in this sheet are subject to change without prior notice. Page 1 of 7 ASC_ WLFI1608 Series_V1.0 July. 2015 FEATURES 1. General purpose chip ferrite power inductor
More informationP7604 Family SHIELDED POWER INDUCTOR PRODUCT DATA SHEET
PRODUCT DATA SHEET SHIELDED POWER INDUCTOR P7604 Family Features Magnetic Shielding High Current (to 5A) Low DCR (to 20mΩ) Low profile (3-7mm) Surface Mount Flat top for pick & place Pb-free Applications
More informationSLF Series. SMD Power Inductors APPLICATIONS OUTLINE PRODUCT IDENTIFICATION FEATURES SLF - -
Yageo corporation INUCTORS / BEAS SLF Series SM Power Inductors APPLICATIONS Portable telephones, computers, hard disk drives and other electronic equipment. OUTLINE SLF series is designed for low profile
More informationFrelTec GmbH. Wire Wound Ceramic Chip Inductors SMD
GmbH Mathildenstr. 10A 82319 Starnberg Germany Wire Wound Ceramic Chip Inductors SMD 8/2/2017 1/15 GmbH www.freltec.com SPECIFICATION Part Number 091 02 * 101 * J * S * T05 ** _ Type Size Value Toleranc
More informationWLFI2012 Ferrite Chip Inductors
WLFI2012 Ferrite Chip Inductors *Contents in this sheet are subject to change without prior notice. Page 1 of 7 ASC_ WLFI2012 Series_V1.0 July. 2015 FEATURES 1. General purpose chip ferrite power inductor
More informationSMT Shielded Power Inductors IDM6025, IDM6028, IDM6045, IDM7032, IDM7045, IDM7055, IDM10145, IDM12555, IDM12565, IDM12575, IDM6028.
SMT Shielded Power s IDM6025, IDM6028, IDM6045, IDM7032, IDM7045, IDM7055, IDM10145, IDM12555, IDM12565, IDM12575, IDM6028 Configurations: FEATURES Magnetically shielded construction. Compact and thin.
More informationShielded SMD Power Inductor
PCS62B / 64B PCS73 / 74 Features 1.5 -High power, High saturation inductors -With magnetically shielded against radiation 5.0 -Directly connected electrode on ferrite core -Highly accurate dimensions for
More informationPower Inductors (IP Series)
Multi-Layer Power Inductors (IP Series) ORDERING CODE... 1 Standard External Dimensions... 2 Power Inductor for Choke (L Type)... 3 Power Inductor for DC/DC converter (S Type)... 4 Testing Condition &
More informationWire Wound Chip Inductor
FEATURES Ceramic base provides high SRF Ultra-compact inductors provide high Q factors High current range available Miniature SMD chip inductor for fully automated assembly Outstanding endurance from Pull-up
More informationSPECIFICATION FOR APPROVAL
PGE: 1 Ⅰ. CONFIGURTION & DIMENSIONS: Marking Dot is start winding & Inductance code 101 : 5.6±0.2 B : 4.5±0.3 C : 2.3 ref. D : 5.8 ref. E : 6.0 ref. F : 1.7 ref. B C D F E ( PCB Pattern ) Ⅱ. SCHEMTIC DIGRM:
More informationReference Only. Inductance Frequency (μh) Tolerance Typ Max (MHz min.) 85 *
P.1/10 CHIP COIL (CHIP INDUCTORS) LQM2HPN G0L REFERENCE SPECIFICATION 1. Scope This reference specification applies to LQM2HPN_G0 series, Chip Coil (Chip Inductors). 2. Part Numbering (ex) LQ M 2H P N
More informationHigh Current Power Inductors HCM1104 Series
High Current Power Inductors HCM1104 Series HALOGEN HF FREE Pb SMD Device Description Halogen free, lead free, RoHS compliant 125 C maximum total operating temperature 11.5x 10.3 x 4.0mm maximum surface
More informationApplication Note TES 1 Series
1W, Miniature SMD, Single & Dual Output DC/DC Converters Features SMD Package with Industry Standard Pinout Small Footprint: 11.0 x 13.7 mm (0.43 x 0.54 ) Single Output Models 11.0 x 16.3 mm (0.43 x 0.64
More informationContent (RF Inductors) Multi-Layer High Frequency Inductors (IQ & HI Series) Cautions... 18
Content (RF Inductors) Multi-Layer High Inductors (IQ & HI Series)... 2 Ordering Code... 2 Standard External Dimensions... 3 High Q Type (IQ Series)... 4 Standard Type (HI Series)... 5 Testing Condition
More informationReference Only. 1. Scope This reference specification applies to LQM2MPN_G0L series, Chip Coil (Chip Inductors).
Spec No. JELF243B-22L-1 P1/9 CHIP COIL (CHIP INDUCTORS) LQM2MPN GL REFERENCE SPECIFICATION 1. Scope This reference specification applies to LQM2MPN_GL series, Chip Coil (Chip Inductors). 2. Part Numbering
More informationLGA LGA TYPE COLOR CODE INDUCTORS HOW TO ORDER FOR EXAMPLE LGA K P 52. Body Dimensions(mm) Product type. Type LGA
LGA LGA TYPE COLOR CODE INDUCTORS HOW TO ORDER FOR EXAMPLE LGA 07 - P 52 A B C D E F A B Product type Body Dimensions(mm) LGA Axial color code inductor 020 07 010 0510 Dmax 2.3 2.8.0 5.0 Lmax.2 7.0 10.5
More informationAfter 5 seconds at +260 C (with pre-conditioning) (±20% for 0402 & 0603 case sizes) After 500 hours at 60 C and 90 ~ 95% RH Humidity
FEATURES SIZES K(0402), J (0603), D (0805) AND C (1008) HIGH Q, HIGH CURRENT AND HIGH CHARACTERISTICS BOTH FLOW AND REFLOW SOLDERING APPLICABLE* HIGH AVAILABLE IN SMALL SIZE EMBOSSED PLASTIC TAPE PACKAGE
More information(TCRC) Power Choke Coil Inductors. Token Electronics Industry Co., Ltd. Version: July 31, Web:
Version: July 31, 2017 (TCRC) Power Choke Coil Inductors Token Electronics Industry Co., Ltd. Web: www.token.com.tw Email: rfq@token.com.tw Taiwan: No.137, Sec. 1, Zhongxing Rd., Wugu District, New Taipei
More informationWLPM Series SMD Molded Power Inductors
WLPM545230 Series SMD Molded Power Inductors *Contents in this sheet are subject to change without prior notice. Page 1 of 7 ASC_WLPM545230 Series_V3.0 June. 2015 FEATURES 1. Shielded construction. 2.
More informationFeature. -Low profile, High Current are Available. Shock and Pressure. -Tighter Tolerance of ±2% -Smaller Size of 0402 (1005) -CATV Filter, Tuner
Wire Wound Chip Inductor-WL Series Feature -Wire wound Ceramic Construction Provide High SRFs -Ultra-compact Inductors Provide Exceptional Q Values -Low profile, High are Available -Miniature SMD Chip
More informationWL Series Wire Wound Chip Inductor
Feature -Wire wound Ceramic Construction Provide High SRFs -Ultra-compact Inductors Provide Exceptional Q Values -Low profile, High are Available -Miniature SMD Chip Inductor for Fully Automated Assembly
More information(TCRB) Radial High Rated Current Choke
Version: December 22, 2017 Electronics Tech. (TCRB) Radial High Rated Current Choke Web: www.direct-token.com Email: rfq@direct-token.com Direct Electronics Industry Co., Ltd. China: 12F, Zhong Xing Industry
More informationMulti-Layer Power Inductors (IP Series)
Multi-Layer Power Inductors (IP Series) For DC/DC Converter Application ORDERING CODE IP R M P S 9 PRODUCT CODE IP : Multilayer Power Inductor (Lead Free) DIMENSION (L X W) Code Dimension EIA. x. mm. X.
More informationData sheet SMD Wire Wound Chip Inductor WL Series
Data sheet SMD Wire Wound Chip Inductor W Series Scope -Ceramic body and wire wound construction provide highest s available.. Features -Ceramic base provide high -Ultra-compact inductors provide high
More informationReference Only. *B: Bulk packing also available. Inductance. Tolerance M:±20% N:±30% 0.150±25% 1.0 * * N:±30% 0.23±25% 0.8 *2 0.
CHIP COIL (CHIP INDUCTORS) LQM21PN GRD REFERENCE SPECIFICATION P.1/9 1. Scope This reference specification applies to LQM21PN_GR series, Chip Coil (Chip Inductors). 2. Part Numbering (ex) LQ M 21 P N 1R
More informationMultilayer Chip Inductor-CL Series
Multilayer Chip Inductor-CL Series Construction A L 5 4 T 1 3 2 W 1 Ceramic Material 3 Inner Electrode (Ag) 5 Direction Mark 2 Through Hole 4 End-termination (Ag/Ni/Sn) Features -A ceramic material construction
More informationWire Wound Chip Inductors Ferrite SMD
GmbH Mathildenstr. 10A 82319 Starnberg Germany Wire Wound Chip Inductors Ferrite SMD 5/10/2018 1/13 GmbH www.freltec.com SPECIFICATION Part Number 095 05 * 101 * J * E02 _ * Type Size Value Packing Current
More informationPOLYFUSE Resettable PTCs Surface Mount > 2920L Series
Surface Mount > Description The device provides surface mount overcurrent protection for medium voltage ( 60V) applications where resettable protection is desired. Features Agency Approvals AGENCY AGENCY
More information2920L Series. POLY-FUSE Resettable PTCs. Surface Mount > 2920L Series. Description
RoHS Description The PTC provides surface mount overcurrent protection for medium voltage ( 60V) applications where resettable protection is desired. Features RoHS compliant, lead-free and halogen-free
More informationPower Inductor SMT Type
UPI F SRIS ULTRA HIGH CURRNT SMT POWR INDUCTOR. Applications:.PDA/Notebook/Desktop, and server applications..dc/dc converters in distributed power systems..dc/dc converter for Field Prograable Gate Array(FPGA).
More informationRADIAL LEADED FIXED INDUCTORS
PK0406/0608/0707/0807/0810/1010/1012/1018/1213 TYPE Shape and size : (Dimensions are in mm) Features : Ordering information :.Low cost. PK 0608-503 K - S0 - TF.Wide range of inductance. (1) (2) (3) (4)
More informationNTC thermistors for temperature measurement
NTC thermistors for temperature measurement SMD NTC thermistors with nickel barrier termination, case size 0805 Series/Type: Date: June 2008 EPCOS AG 2008. Reproduction, publication and dissemination of
More informationRJ45 SINGLE PORT 100/1000/2.5G/5G BASE-T MAGNETICS
SERIES DESCRIPTION The series of RJ45 jacks with internal magnetics supports a wide range of configurations in 10/100Base-T, 1000Base-T, 2.5GBase-T and 5GBase-T applications. This series offers the ability
More information(1) SHAPES AND DIMENSIONS
Ⅰ. SCOPE: This specification applies to the Pb Free high current type SMD inductors for PRODUCT INDENTIFICATION MSI - 100807 - R12 M 1 2 3 4 1 Product Code 2 Dimensions Code 3 Inductance Code 4 Tolerance
More informationVLS-E series. Inductors for Power Circuits. Wound Ferrite
May 2013 Inductors for Power Circuits Wound Ferrite VLS-E series VLS201610E VLS201612E VLS2010E VLS2012E VLS252008E VLS252010E VLS252012E VLS252015E VLS3010E VLS3012E VLS3015E VLS4012E (1/52) REMINDERS
More informationSPECIFICATION FOR APPROVAL
PGE: 1 Ⅰ. CONFIGURTION & DIMENSIONS: Marking D C : 12.0±0.3 m/m : 12.0±0.3 m/m C : 8.0 max m/m D : E : 5.0 typ. 5.7 typ. m/m m/m F : 4.5 ref. m/m G : 5.5 ref. m/m H : 4.0 ref. m/m G H E F H Ⅱ. SCHEMTIC
More informationP7609 Family POWER INDUCTOR PRODUCT DATA SHEET
PRODUCT DATA SHEET POWER INDUCTOR P7609 Family Features Current to 3.8A Low DCR (to 30mΩ) Low profile (to 2.2mm) Surface Mount Flat top for pick & place Electroplated terminals Applications DC-DC Converters
More informationFlat Coil Inductor Catalog. Electronics Division 2015 A0
Flat Coil Inductor Catalog Electronics Division 2015 A0 Index Mentech flat coil inductor provide exceptionally low and higher rated current.applications in telcom switches and routers,server,dc-dc converters,
More informationRF Inductor. SMD Wirewound Inductors Chip Open-Type - WL Series / 绕线贴片电感 of 13
SMD Wirewound Inductors Chip Open-Type - WL Series / 绕线贴片电感 Wirewound Chip Inductor Features - Wire wound Ceramic Construction Provide High s. - Ultra-compact Inductors Provide Exceptional Values. - Low
More informationWire Wound Chip Inductor-WB Series
Wire Wound Chip Inductor-WB Series Construction 4 1 3 1 Ceramic Core 3 Electrode (Ag/Pd+Ni+Sn) 2 Magnet Wire 4 UV Glue 2 Features -Ceramic base provide high -Ultra-compact inductors provide high Q factors
More informationFrelTec GmbH. Multilayer Ceramic Chip Inductors SMD
GmbH Mathildenstr. 10A 82319 Starnberg Germany Multilayer Ceramic Chip Inductors SMD 10/12/2010 1/12 Freltec GmbH www.freltec.com SPECIFICATION Part Number 090 02 * 101 * J * T04 Type Size Value Tolerance
More informationRF Type 5 (04) Dimensions in mm (not to scale) Recommended Land Pattern in mm (not to scale) 0.2± ± ± ±0.05 Standard Packing uantit
Chip Inductors High Frequency Use (Non Magnetic Core) Type: ELJRF ELJRE Features High frequency capability due to its non magnetic core. Capable of being Re-fl ow or fl ow soldered. Unique Ceramic Core/Laser-cut
More informationLGA LGA TYPE COLOR CODE INDUCTORS HOW TO ORDER FOR EXAMPLE LGA K P 52. Body Dimensions(mm) Product type. Type LGA
LGA HOW TO ORDER FOR EXAMPLE LGA 07 - P 52 A B C D E F A B Product type Body Dimensions(mm) LGA Axial color code inductor 0204 07 0410 0510 Dmax 2.3 2.8 4.0 5.0 Lmax 4.2 7.0 10.5 10.5 C Nominal lnductance(
More informationPower Inductor SMT Type
SMD SERIES WIRE WOUND SMD CHIP INDUCTORS Applications :.DSC, DVC products..pcs.hard disk drives and computer peripherals..telecommunications devices..tv circuits..test equipment. Shape and Dimensions (Dimensions
More informationHigh Current, High Frequency Power Inductors HCM1103 Series
High Current, High Frequency Power Inductors HCM1103 Series HALOGEN HF FREE Pb Description Halogen free, lead free, RoHS compliant 125 C maximum total temperature operation 11.5 x 10.3 x 3.0mm maximum
More informationPOLY-FUSE Resettable PTCs Surface Mount > 1206L Series
Description The PTC provides surface mount overcurrent protection for applications where space is at a premium and resettable protection is desired. Features Agency Approvals AGENCY AGENCY FILE NUMBER
More informationPOLYFUSE Resettable PTCs Surface Mount > 2920L Series
Surface Mount > Description The PTC provides surface mount overcurrent protection for medium voltage ( 60V) applications where resettable protection is desired. Features Agency Approvals AGENCY AGENCY
More informationFIXED INDUCTORS FEATURES
FEATURES Extremely reliable inductors that are ideal for automatic insertion. Highly efficient automated production processes can provide high quality inductors in large volumes. Wide selection of configurations
More informationSMD Wire Wound Chip Inductor
GSW Series SMD Wire Wound Chip Inductor Scope -Ceramic body and wire wound construction provide highest s available.. Features -Ceramic base provide high -Ultra-compact inductors provide high Q factors
More informationMLK1005 Type. Inductors for High Frequency Circuits. MLK Series (For automobiles) Multilayer Ceramic [0402 inch]* January 2015
January 2015 Inductors for High Frequency Circuits Multilayer Ceramic MLK Series (For automobiles) MLK1005 1005 [0402 inch]* * Dimensions Code JIS[EIA] (2/10) REMINDERS FOR USING THESE PRODUCTS Before
More informationINDUCTORS SMD POWER INDUCTORS SMD
INDUCTORS, COIS, FITERS & FERRITES INDUCTORS SMD POWER INDUCTORS SMD K AND CK SERIES STANDARD MUTIAYER INDUCTORS Features: Internal printed coil structure that creates a closed magnetic circuit which acts
More informationABC'S DWG NO. ABC'S ITEM NO. m/m Marking. Peak Temp:260 max. Max time above 230 :50sec max. Max time above 200 :70sec max. Temperature Rising Area
PGE: 1 Ⅰ. CONFIGURTION & DIMENSIONS: : 5.6±0.2 Marking Dot is start winding & Inductance code 101 B : 4.5±0.3 C : 2.3 ref. D : 5.8 ref. E : 6.0 ref. F : 1.7 ref. B C D F E ( PCB Pattern ) Ⅱ. SCHEMTIC DIGRM:
More informationNXJ1 Series Isolated 1W Single Output SM DC-DC Converters
SELECTION GUIDE FEATURES Patents pending Lower Profile UL9 Recognised ANSI/AAMI ES-, 2 MOOP, MOPP Recognised 4.2kVDC Isolation Hi Pot Test Substrate Embedded Transformer Automated Manufacture Industry
More informationSRP7030F Series - Shielded Power Inductors
*RoHS COMPLIANT 8R2 Features Shielded construction Flat wire Unit height as low as 3. mm Inductance range:.1 to 1 μh Rated current up to 32 A RoHS compliant* This series is currently available but not
More informationInductors for Power Circuits
Inductors for Power Circuits Wound/STD magnetic shielded CLF-D series Type: CLF7-D (.9x7. mm) Issue date: May Conformity to RoHS Directive: This means that, in conformity with EU Directive /9/EC, lead,
More informationS J
1. Part Number Identification SPECIFICATION Brightek (Europe) Limited S01-2220 - 240 250 J Series Name Inner Code Size 1206~3220 250 250 = 25 10 0 V=25J 1R5 1R5 = 1.5J Breakdown Voltage 240 = 24 10 0 V=24V
More informationInductors for High-frequency Circuits
Inductors for High-frequency Circuits Multilayer/STD MLG series Type: MLG0603S MLG1005S MLG1608 0603[0201 inch]* 1005[0402 inch] 1608[0603 inch] * Dimensions Code JIS[EIA] Issue date: November 2011 Conformity
More informationNXE1 Series Isolated 1W Single Output SM DC-DC Converters
NXE1 Series SELECTION GUIDE Order Code 1 Nominal Input Voltage Output Voltage Input Current Output Current Load Regulation (Typ) Load Regulation (Max) Output Ripple & Noise (Typ) Output Ripple & Noise
More informationSELECTION GUIDE. Nominal Input Voltage. Output Voltage. Input Current. Input reflected ripple current
SELECTION GUIDE NXE2 Series FEATURES Patents pending Lower Profile UL69 Recognised ANSI/AAMI ES661-1 Recognised 3kVDC Isolation Hi Pot Test Substrate Embedded Transformer Automated Manufacture Industry
More informationNXJ2 Series Isolated 2W Single Output SM DC-DC Converters
NXJ2 Series SELECTION GUIDE FEATURES Patents pending Lower Profile UL69 Recognition pending ANSI/AAMI ES661-1, 2 MOOP, 1MOPP recognition pending 5.2kVDC Isolation Hi Pot Test Substrate Embedded Transformer
More informationFeatures. Non Isolated Power Module ROF-78E ROF-78E - SMD-R. DC/DC Converter
Features Low profile 4.mm Low cost Wide input range (5V - 36V) Short circuit protection Casellated connections DC/DC Converter Description The is a switching regulator with a wide input voltage range,
More informationNXE2 Series Isolated 2W Single Output SM DC-DC Converters
SELECTION GUIDE NXE2 Series FEATURES Patents pending Lower Profile UL69 Recognised ANSI/AAMI ES661-1 Recognised 3kVDC Isolation Hi Pot Test Substrate Embedded Transformer Automated Manufacture Industry
More informationSCDS Series. Shielded SMD Power Inductors. Features
YAGEO CORPORATION SMD INDUCTOR / BEADS Series Shielded SMD Power Inductors Applications Power Supply for VTRs OA Equipment LCD Televisions Notebook PCs Portable Communication Equipment DC / DC Converters,
More informationSELECTION GUIDE. Nominal Input Voltage. Output Voltage. Input Current. Input reflected ripple current
SELECTION GUIDE FEATURES Patents pending Lower Profile UL9 Recognised ANSI/AAMI ES1-1 Recognised 3kVDC Isolation Hi Pot Test Substrate Embedded Transformer Automated Manufacture Industry Standard Footprint
More information