AXIAL LEAD TYPE INDUCTOR

Transcription

1 KH CODE NUMBER COMPOSITION AL K T Product name : Axial Leaded Inductor 2 Dimension ( Diameter Height ) 0307: 3.0mm 7.0 mm 0410: 4.2mm 9.8 mm 3 Inductance 4R7: 4.7 μh, 331: 330 μh, 103: μh 4 Tolerance K: ±10%, M: ±20% 5 Style : AXIAL Taping type KH CODE NUMBER COMPOSITION Color Inductance[μH] 1st(1) 2nd(2) Multiplier(3) Tolerance(4) 1st(1) Multiplier(3) 2nd(2) Tolerance(4) Black 0 1 ±20% Brown Red Orange Yellow Green Blue Purple Grey White Gold ±5% Silver ±10%

2 APPEARANCE & DIMENSION (UNIT:m/m) Type Dimensions A ΦB ΦC D E F G H AL ±0.05 5± ±1.0 52±2.0 AL ±0.05 5± ±1.0 52±2.0

3 Electrical Characteristics (AL03) Ordering AL0307-1R0KT AL KT AL KT AL KT AL KT AL0307-8R2KT AL KT AL KT 12.0 AL KT AL KT AL0307-1R8KT AL0307-3R3KT AL0307-3R9KT AL0307-4R7KT AL KT AL KT AL KT 33.0 ±10% AL KT AL KT AL KT AL KT AL KT AL KT AL KT AL KT AL KT AL KT AL KT AL KT AL0307-2R2KT AL0307-2R7KT AL0307-5R6KT AL0307-6R8KT AL KT AL KT AXIAL LEAD TYPE INDUCTOR Inductance [μh] AL0307-1R2KT 1.2 Inductanced Tolerance Q (min.) Measuring [ MHz ] Self-Resonant [ MHz ](min.) DC Resistance [Ω]() AL0307-1R5KT Rated Current [ma] ()

4 Electrical Characteristics (AL04) Ordering AL0410-1R0KT 1.0 AL0410-6R8KT AL0410-8R2KT AL KT AL KT 12.0 AL KT AL KT AL KT AL KT AL KT AL KT AL KT AL KT AL KT AL KT AL KT ±10% AL KT AL KT AL KT AL KT AL KT AL KT AL KT AL KT AL KT AL KT AL KT AL KT AL KT AL KT AL KT AL KT AL KT AL0410-4R7KT AL0410-5R6KT AL KT AL KT AL KT AL KT AL KT AL KT AL KT AL0410-1R2KT AL0410-1R5KT AL0410-1R8KT AL0410-2R2KT AL0410-2R7KT AXIAL LEAD TYPE INDUCTOR Inductance [μh] 2.7 Inductanced Tolerance Q (min.) Measuring [ MHz ] Self-Resonant [ MHz ](min.) DC Resistance [Ω]() Rated Current [ma] () AL0410-3R3KT AL0410-3R9KT

5 INSIDE CONSTRUCTION & MATERIALS NO Item Materials 1 Core Ferrite Core 2 Glue Epoxt resin 3 Lead pin Copper wire plated Tin 100% 4 Magnet wire Modified polyester 5 Solder Solder bar Sn98% / Solder wire sn98% 6 Under coat Butadiene resin 7 Out coat Epoxy resin 8 Color ink Ink REMARK KUMHO guarantees Pb-free product and commits to comply with all environmental laws and regulation. & components made KUMHO, don't be included any environmetally banned and relevant substances.

6 Physicals Load Circumstance General AXIAL LEAD TYPE INDUCTOR RELIABILTY RELIABILTY Item Specification Test method Operation Temperature Range. Appearance Construction inductance Q -25 ~+85 Including Self-generated heat. HP4285A LCR METER+42851A PRECISION Q ADAPTER or equivalent Self Resonant DC Resistance In accordance with individual standard require meanest Agilent 4294A RECISION IMPEDDANCE ANALYZER +Agilent 16092A SPRING CLIP FIXTURE or its equivalent Hioki3226( MΩ Tester) or its equivalent Rated current Less then 10% inductance of duplicated current character or rise temp 20 is opposed to current Over current test No emission of smoke nor firing. A current in the size of twice as much as the rated current is applied of 5 minutes. Temperature characteristics L/L:Within ±5% -25 ~+85 (Standard:20 ) Damp heat Temp:40 ±2, RH:90~95% Tiem:1000hours Thermal shock High heat Low temperature Loading under tensile damp heat L/L:Within ±10% Q/Q:Within ±30% Temp: ,Time:30min, 10cycle Temp:85 ±2,Time:1000hours Temp:-25 ±2,Time:1000hours Temp:40 ±2,RH:90~95% applying rated current, duration in 1000hours. Loading at high temperature Temp:85 ±2,applying rated current, duration in 1000hours. Solder ability Solder more than 95% on of lead pin Solder after immersing in flux, dip in the 230±5,3±0.5SEC. Inductance to soldering heat Vibration test L/L:Within ±5% Q/Q:Within ±30% Solder after immersing in flux, dip in the 270±5,3±0.5SEC. (Dip under 3mm from wound body) Soldering lead of inductor on pcb 2hours each in X,Y and Z directions total 6hours 10 to Hz sweep in 60sec appliqued. Drop test Dropping 10cycle at 1m high on the ground Tensile strength Applying slowly direct load to 2.5kgf for 5sec. In the direction of the longitudinal axis of the lead pin. Bending test No abnormality such as cutoff of looseness of lead Inductence to a bending test with a force of 250g for duty rotation in altercating Directions so that the lead pins shell be Bent through 90 in the both sides a the rate of approx. 5seconds per rotation Body strength No abnormality such as damage Applying direct lot to 5Kgf for 10 seconds Specifications given herein may be changed at any time without prior notice. Please confirm technical specifications before y our order and/or use.

7 PACKING Inner Box Out Box Item Size (mm) (LxWxH) Quantity (pcs) Size (mm) (LxWxH) Quantity (pcs) Weight AL x75x85 2, x285x295 45,000 11Kg AL x75x115 2, x380x260 30,000 15Kg