Electrical 25 C Operating Temperature -40 C to 125 C. Application 2 Secondary Inductance Inductance Pri.
|
|
- Rosemary Johnson
- 6 years ago
- Views:
Transcription
1 EFD Platforms - EFD, EFD0 and EFD Transformers and Inductors Power: 0W to 0W Three Different Platforms: THT and Low Profile Platforms:.mm to.mm Custom designs available Electrical C Operating Temperature -0 C to C Part, Turns Ratio Leakage DCR (mω ) Number Application Secondary Inductance Inductance Pri. Pri. Sec. Sec. Pri. Sec. Pri. Aux. Isolation (µh MIN) (µh ) Aux. A B EFD PLATFORMS - UP TO0W EFD - 0 PIN - (.MM X.MM X.MM) PBNL W Flyback Transformer Vin=-v, Freq.=kHz 00Vrms Vout=v/.A, N/A EFD - PIN - (.MM X.MM X.MM) PA0NL W Flyback Transformer Vin=-v, Freq.=00kHz 00Vrms Vout=v/A, 0v/0mA. 0.. N/A PA0NL Vin=0-v, W Flyback Freq.=00kHz Transformer & Vout=.v/A,.v/0mA0v/0mA (.v) (.v) W Flyback Transformer PA0NL 00Vdc. Vin=-v, Freq.=00kHz 0 0 & PA0NL 0W Forward Transformer Vin=-v, Freq.=kHz 0 & 00Vrms 0 0 & 0 Vout=.v/A, v/ma (reset) (reset) N/A EFD 0 PLATFORMS - UP TO0W EFD 0 - PIN THT - (.0MM X.0MM X.0MM) PA00NL 0W Forward Transformer 00Vdc Vin=0-v, Freq.=0kHz & Vout=v/A, -v/.a, v/0.a 0 EFD 0-0 PIN - (.MM X.MM X 0.MM) PB00NL 0W Flyback Transformer Vin=-v, Freq.=00kHz 00Vrms. Vout=v/A, N/A EFD 0 - PIN - (.MM X.MM X.MM) PA0NL 0W Forward Transformer 00Vrms Vin=-v, Freq.=0kHz 0 0 Vout=v/.A, v/0.a N/A PA0NL W Flyback Transformer 00Vdc Vin=-v, Freq.=0kHz Vout=.v/.A, v/0.a 00 N/A PA0NL 00W Forward Transformer 00Vdc &. Vin=-v, Freq.=0kHz &. 0 0 (±v) (v) Vout=±v/.A, v/a & PA0NL W Forward Transformer Vin=0-v, Freq.=0kHz & & Vout=±v/.A, v/0ma (reset) 00Vrms 00 & N/A PB0NL W Forward Transformer 00Vrms 0.. Vin=-v, Freq.=0kHz N/A N/A (+v) (-v Sec) Vout=v/A, -v/a & PB0NL W Forward Transformer 00Vrms. Vin=-v, Freq.=0kHz & (.v Sec) (.v Sec) Vout=.v/0A,.v/0.0A (reset) PBNL W Flyback Transformer 00Vdc Vin=-v, Vout=.v/.A, v/0.a 00 N/A (Transformers continued on next page) USA 00 Germany Singapore Shanghai / China Taiwan 0 SPM00 (/0)
2 EFD Platforms - EFD, EFD0 and EFD (continued) Electrical C Operating Temperature -0 C to C Part, Turns Ratio Leakage DCR (mω ) Number Application Secondary Inductance Inductance Pri. Pri. Sec. Sec. Pri. Sec. Pri. Aux. Isolation (µh MIN) (µh ) Aux. A B EFD PLATFORMS - UP TO0W EFD - 0 PIN THT - (.MM X.MM X.0MM) PA0NL 00W Forward Transformer Vin=-v, Freq.=0kHz 00Vdc Vout=.v/0A, v/0.a N/A EFD - 0 PIN - (.0MM X.MM X.MM) PA00NL F-Bridge Transformer Vin=-v, Freq.=0kHz 00Vrms Vout=v/A 0. 0 EFD - PIN - (.0MM X.MM X.MM) PA000NL W Forward Transformer Vin=v, Freq.=0kHz N/A 0Vrms Vout=v/.A. 0. N/A N/A INDUCTORS Induct. DCR (mω ) ±v Induct. Saturation Heating Part, Irated Irated Turns Ratio 0 Adc Current Current Winding Number (µh MIN) (Adc) Winding Winding Winding to Aux. (µh (A) Isolation EFD 0 PLATFORMS EFD 0 - PIN - (.MM X.MM X.MM) PB0NL Output Inductor 00 for PB0 ::... Vrms Transformer (+v:-v:aux) (+v) (+v) (v Aux.) Notes:. The temperature of the component (ambient plus temperature rise) must be within the stated operating temperature range.. The above transformers and inductors have been tested and approved by Pulse's power IC partners and are sited in the appropriate datasheet or evaluation board documentation at these companies. To determine which IC and IC partners are matched with the above Pulse part numbers please consult the IC Cross Reference on the Pulse website.. The rated current as listed is either % of the saturation current or the heating current whichever is lower.. The saturation current is the current which causes the inductance to drop EFD.0, 0-PIN Mechanicals by 0% at C. This current is determined by placing the component in the specified ambient environment and applying a short duration pulse current (to eliminate self-heating effects) to the component.. The heating current is the dc current which causes the temperature of the part to increase by approximately 0 C.. Add 'T' suffix to the part number for Tape & Reel version (ie: PB0NLT).. The "NL" suffix indicates an RoHS-compliant part number. Non-NL suffixed parts are not necessarily RoHS compliant, but are electrically and mechanically equivalent to NL versions. If a part number does not have the "NL" suffix, but an RoHS compliant version is required, please contact Pulse for availability.., -PIN 0X.0 0,.0,0.,.0,.0, 0X.0 0,0.0,0.,.0, X.0 0,.0,0.0,.,., 0X.0 0,0.0,0.0,.00,.0, 0X 0 -.0,.00 0,.00/0, 0 SURFACES.0 ±.00 0X, ± 0,.00 ±.00 0, ± 0,0.00/0,0 SURFACES X.0, USA 00 Germany Singapore Shanghai / China Taiwan 0 SPM00 (/0)
3 EFD Platforms - EFD, EFD0 and EFD EFD 0 Mechanicals 0X.0,00.,.0,.,.00, 0-PIN.0, 0X.00,0.,.,.00,.0, X.0 0,.,00.0,.0, -PIN.0,.0 0, X.00,.,00.0,.0 0,.0,.00 ±.00 0, ± 0,0.00/0, 0 SURFACES 0X.0,00.00 ±.00 0, ± 0,0.00 /0, SURFACES X.00,0. 0, -PIN THT.,00 Pin Pin Pin Pin X Ø.0 0,. 0,. ±.00,0 ± 0,.,00. ±.00,0 ± 0, USA 00 Germany Singapore Shanghai / China Taiwan 0 SPM00 (/0)
4 EFD Platforms - EFD, EFD0 and EFD EFD Mechanicals.00, 0-PIN.00, -PIN 0X.0,0.,00. 0,00.0,00.0, 0X.0,.,00. 0,00.0, X.0,0.,0.0 0,0.0,00.0, X.0,.,0.0 0,0.00,0.0,.0,.00 ±.00 0, ± 0,0.00/0, 0 SURFACES 0X.0 0,.0 ±.00 0,0 ± 0,0.00/0, SURFACES X.0 0,.0, Pin Chamfer.00, 0-PIN THT.00,0.00 0,.,0 0X Ø.0,.0,.00 0,.00,0. ±.0,0 ± 0,0 0X.0 0,.,0 0 USA 00 Germany Singapore Shanghai / China Taiwan 0 SPM00 (/0)
5 EFD Platforms - EFD, EFD0 and EFD Schematics EFD -v khz v/0.a PB +v/.a,, NOTE: Pins to and Pins to to be -v Auxiliary 0v/.0A PA0 PA0 +v/a 0 -v 00kHz 0v/0.0A PA0.v/A 0.v/0.0A NOTE: Pins, and 0 to be 0-v 00kHz 0v/0.0A PA0.0v/A 0.v/0.0A NOTE: Pins, and 0 to be RESET,,0 -v.v/a,, AUX v/ma EFD 0 0-v 0kHz PA00 +v/a -v/.a 0 -v Auxiliary v/0.a PB00 +v/a,, -v Pri. Aux. v/0.a PA0 +v/.a,, 0,, -v 0kHz v/0.a PA0.v/.A,,0,, -v 0kHz v/0.a PA0 +v/a +v/.a -v/.a 0 NOTE: Pins & and Pins & to be RESET -v AUX v/ma PA0 v/.a v/.a 0 (EFD 0 Schematics continued on next page) USA 00 Germany Singapore Shanghai / China Taiwan 0 SPM00 (/0)
6 EFD Platforms - EFD, EFD0 and EFD Schematics EFD 0 (continued) -v PB0 +v/a 0 -v/a -v PB0 +.v/0a +.v/.0a 0 -v 00kHz v/0.a PB +.v/.a 0 NOTE: Pins &, Pins & 0, and Pins & to be NOTE: Pins & and Pins & to be NOTE: Pins 0 &, Pins & to be -v Bias 0.v/0.0A PB +.v/.a 0 +v/a 0 -v/a PB0 NOTE: Pins, & and Pins, 0 & to be v Side Aux Winding EFD T T T PA0 T 0 -v Auxiliary PA00 v/a PA v/.a v NOTE: Pins and 0 to be USA 00 Germany Singapore Shanghai / China Taiwan 0 SPM00 (/0)
Champs Technologies. About Us. Champs Technologies. Formation Factory Location: Taiwan (Main Plant) ISO Certification.
About Us Champs Technologies Formation 1992 Factory Location: Taiwan (Main Plant) ISO9001-2008 Certification UL File #251699 RoHS Compliant Capabilities Design & Manufacture Planar Transformers & Inductors.
More informationPower Inductors - RFB Series
Document 277-1 Power Inductors - RFB Series These low cost power inductors offer a wide range of inductance values, from 2.2 µh to 18 mh. They have an open magnetic construction that gives them high current
More informationSMT Power Inductor High Current Molded Power Inductor - PA4342.XXXNLT Series
Height: 4.0mm Max Footprint: 11.5mm x 10.3mm Max Current Rating: up to 43.0A Inductance Range: 0.15uH to 68.0uH Shielded construction and compact design High current, low DCR, and high efficiency Minimized
More informationLow-Profile, Shielded Drum Core, Tapped Inductor SDT30 Series
Low-Profile, Shielded Drum Core, Tapped Inductor SDT0 Series SMD Device Description Halogen Free Approved for use with Maxim MAX45 chip set 5 C maximum total temperature operation. x. x.0mm shielded drum
More informationPower Inductors RFB Series
Document 277-1 Power Inductors RFB Series Low cost, high current power inductors 2.2 µh to 18 mh inductance range 500 V isolation from winding to core. RFB0810 and RFB1010 have a flame retardant polyolefin
More informationSELECTION GUIDE. Nominal Input Voltage. Output Voltage. Input reflected ripple current. Switching frequency NXE1S0305MC 85
SELECTION GUIDE Order Code 1 Nominal Input Voltage Output Voltage Input Current Output Current Load Regulation (Typ) Load Regulation (Max) Output Ripple & Noise (Typ) Output Ripple & Noise (Max) Efficiency
More informationNXE1 Series Isolated 1W Single Output SM DC-DC Converters
NXE1 Series SELECTION GUIDE Order Code 1 Nominal Input Voltage Output Voltage Input Current Output Current Load Regulation (Typ) Load Regulation (Max) Output Ripple & Noise (Typ) Output Ripple & Noise
More information74 ( ) 127 ( ) A [0,315] 2,20 [0,079] [0,087] 1,60 [0,063] Land Pattern
A FEATURES Shielded Construction with very low DCR Heating Current rating up to 17.9 Amps Saturation Current rating up to 7.5 Amps (based on only 10% inductance drop) Inductance up to 1mH for all case
More informationCoiltronics HCM1104 Series High current power inductors
Supersedes March 2012 Coiltronics High current power inductors Applications Voltage Regulator Module (VRM) Multi-phase regulators Point-of-load modules Desktop and server VRMs and EVRDs Base station equipment
More informationHigh Current, High Frequency Power Inductors HCM1103 Series
High Current, High Frequency Power Inductors HCM1103 Series HALOGEN HF FREE Pb Description Halogen free, lead free, RoHS compliant 125 C maximum total temperature operation 11.5 x 10.3 x 3.0mm maximum
More informationCoiltronics HCM0703 Series High current power inductors
Supersedes September, 2010 Coiltronics HCM0703 Series High current power inductors Applications Voltage Regulator Module (VRM) Multi-phase regulators Point-of-load modules Desktop and server VRMs and EVRDs
More informationSELECTION GUIDE. Nominal Input Voltage. Output Voltage. Input Current. Input reflected ripple current
SELECTION GUIDE NXE2 Series FEATURES Patents pending Lower Profile UL69 Recognised ANSI/AAMI ES661-1 Recognised 3kVDC Isolation Hi Pot Test Substrate Embedded Transformer Automated Manufacture Industry
More informationNXE1 Series Isolated 1W Single Output SM DC/DC Converters
NXE1 Series SELECTION GUIDE FEATURES Patents pending Lower Profile UL695 Recognition pending ANSI/AAMI ES661-1 Recognition pending 3kVDC Isolation Hi Pot Test Substrate Embedded Transformer Automated Manufacture
More informationNXE2 Series Isolated 2W Single Output SM DC-DC Converters
SELECTION GUIDE NXE2 Series FEATURES Patents pending Lower Profile UL69 Recognised ANSI/AAMI ES661-1 Recognised 3kVDC Isolation Hi Pot Test Substrate Embedded Transformer Automated Manufacture Industry
More informationNXJ1 Series Isolated 1W Single Output SM DC-DC Converters
SELECTION GUIDE FEATURES Patents pending Lower Profile UL9 Recognised ANSI/AAMI ES-, 2 MOOP, MOPP Recognised 4.2kVDC Isolation Hi Pot Test Substrate Embedded Transformer Automated Manufacture Industry
More informationSELECTION GUIDE. Nominal Input Voltage. Output Voltage. Input Current. Input reflected ripple current
SELECTION GUIDE FEATURES Patents pending Lower Profile UL9 Recognised ANSI/AAMI ES1-1 Recognised 3kVDC Isolation Hi Pot Test Substrate Embedded Transformer Automated Manufacture Industry Standard Footprint
More informationHigh Current Power Inductors HCM1104 Series
High Current Power Inductors HCM1104 Series HALOGEN HF FREE Pb SMD Device Description Halogen free, lead free, RoHS compliant 125 C maximum total operating temperature 11.5x 10.3 x 4.0mm maximum surface
More informationNTA Series Isolated 1W Dual Output SM DC/DC Converters
www.murata-ps.com NTA Series FEATURES RoHS compliant Efficiency up to 78% Wide temperature performance at full 1 Watt load, 40 C to 85 C UL 94V-0 Package material Footprint over pins 1.64cm 2 Lead frame
More informationMagnetic Products. Inductors Pulse Transformers Current Sensing Transformers Databus Isolators Common-Mode Chokes.
Magnetic Products Inductors Pulse Transformers Sensing Transformers Databus Isolators Common-Mode Chokes Magnetic Products Two essential elements of the vast majority of power electronics applications
More informationSELECTION GUIDE. Nominal Input Voltage. Output Voltage. Input Current. Input reflected ripple current
SELECTION GUIDE FEATURES Patents pending Lower Profile UL9 Recognition pending ANSI/AAMI ES1-1 Recognition pending 3kVDC Isolation Hi Pot Test Substrate Embedded Transformer Automated Manufacture Industry
More informationMPI2520 High Current, Low Profile, Miniature Power Inductors HALOGEN FREE
Technical Data 10199 MPI2520 High Current, Low Profile, Product description: Pb Halogen free, lead free, RoHS compliant 125 C maximum total temperature operation 2.7 x 2.2 x 1.0 / 1.2mm maximum surface
More informationSELECTION GUIDE. Nominal Input Order Code 1 Voltage. Output Voltage
www.murata-ps.com NTE Series FEATURES RoHS compliant Lead frame technology Single isolated output 1kVDC Isolation Efficiency up to 78% Power density 1.8W/cm 3 Wide temperature performance at full 1 Watt
More informationNXJ2 Series Isolated 2W Single Output SM DC-DC Converters
NXJ2 Series SELECTION GUIDE FEATURES Patents pending Lower Profile UL69 Recognition pending ANSI/AAMI ES661-1, 2 MOOP, 1MOPP recognition pending 5.2kVDC Isolation Hi Pot Test Substrate Embedded Transformer
More informationFP1008R5 and FP1008R6 High frequency, high current power inductors
Technical Data 152 Effective April 217 FP18R5 and FP18R6 High frequency, high current power inductors Applications Multi-phase and Vcore regulators Voltage Regulator Modules (VRMs) and high power density
More informationMagnetics Short Form Catalog Electronics Division
Magnetics Short Form Catalog Electronics Division Eaton Electronics Product Selection Tools PARAMETRIC SEARCH Drill down into the Eaton Electronics product database to find the right part for your application.
More informationFlat Coil Inductor Catalog. Electronics Division 2015 A0
Flat Coil Inductor Catalog Electronics Division 2015 A0 Index Mentech flat coil inductor provide exceptionally low and higher rated current.applications in telcom switches and routers,server,dc-dc converters,
More informationHigh Current Power Inductors HCM1104 Series
High Current Power Inductors HCM1104 Series HALOGEN HF FREE Pb SMD Device Description Halogen free, lead free, RoHS compliant 125 C maximum total operating temperature 11.5x 10.3 x 4.0mm maximum surface
More informationDesigns available to match a variety of PWM control IC s. Designs meet UL/CSA/TUV/VDE Safety Standards.
Information shown uses standard parts. Modified or special designs are available. S.M.P.S Transformers Designs available to match a variety of PWM control IC s. Designs meet UL/CSA/TUV/VDE Safety Standards.
More informationMTU2 Series Isolated 2W Single & Dual Output SM DC/DC Converters
www.murata-ps.com MTU2 Series SELECTION GUIDE FEATURES Patent Protected UL 9 Recognised Footprint over pins.69cm 2 Single & dual isolated output 1kVDC Isolation Hi Pot Test Efficiency up to 85% (Typ.)
More information2R2. Design Code Design Code M ±20%
Wire Wound SMD Power Inductors WPN Series Operating Temp. : -40 ~+125 (Including self-heating) FEATURES Fe base metal material core provides large saturation current Metallization on ferrite core results
More informationP7609 Family POWER INDUCTOR PRODUCT DATA SHEET
PRODUCT DATA SHEET POWER INDUCTOR P7609 Family Features Current to 3.8A Low DCR (to 30mΩ) Low profile (to 2.2mm) Surface Mount Flat top for pick & place Electroplated terminals Applications DC-DC Converters
More informationMTU1 Series Isolated 1W Single & Dual Output SM DC/DC Converters
www.murata-ps.com MTU1 Series SELECTION GUIDE FEATURES Patent Protected UL60950 recognised Footprint over pins 0.69cm 2 Single & dual isolated output 1kVDC Isolation Hi Pot Test Efficiency up to 88% (Typ.)
More informationP7604 Family SHIELDED POWER INDUCTOR PRODUCT DATA SHEET
PRODUCT DATA SHEET SHIELDED POWER INDUCTOR P7604 Family Features Magnetic Shielding High Current (to 5A) Low DCR (to 20mΩ) Low profile (3-7mm) Surface Mount Flat top for pick & place Pb-free Applications
More informationMulti-Phase Power Inductors CL0904 Series
Multi-Phase Power Inductors CL0904 Series HALOGEN HF FREE Pb Applications For exclusive use with Volterra VPR-Devices Environmental Data Storage temperature range: -40 C to +125 C Operating temperature
More informationNME 5V & 12V SERIES. Technical enquiries tel: +44 (0) Isolated 1W Single Output DC/DC Converters
FEATURES RoHS compliant Single isolated output 1kVDC isolation Efficiency up to 80% Wide temperature performance at full 1 watt load, 40 C to 85 C Power density 1.53W/cm 3 UL 94V-0 package material Footprint
More informationMTC2 Series Isolated 2W SM 2:1 Input Single Output DC-DC Converters
MTC2 Series SELECTION GUIDE FEATURES UL 9 recognised for reinforced insulation ANSI/AAMI ES1-1, 1 MOPP/ 2 MOOPs recognised 3kVAC isolation test voltage Hi Pot Test Continuous short circuit protection Output
More informationMEV3 Series 3kVDC Isolated 3W Single Output DC/DC Converters
SELECTION GUIDE FEATURES RoHS compliant Typical effi ciency from 83% Power density 1.9W/cm 3 Wide temperature performance at full 3 Watt load, 4 C to 85 C UL 94V- package material No heatsink required
More informationNME 5V & 12V Series Isolated 1W Single Output DC/DC Converters
FEATURES RoHS compliant Single isolated output 1kVDC isolation Efficiency up to 80% Wide temperature performance at full 1 watt load, 40 C to 85 C Power density 1.53W/cm 3 UL 94V-0 package material Footprint
More informationInductors for Power Circuits
Inductors for Power Circuits Wound/STD magnetic shielded CLF-D series Type: CLF7-D (.9x7. mm) Issue date: May Conformity to RoHS Directive: This means that, in conformity with EU Directive /9/EC, lead,
More informationSELECTION GUIDE. Order code B0303NXT-1W B0305NXT-1W B0309NXT-1W
B-NXT-1W 1W, FIXED INPUT, ISOLATED SINGLE OUTPUT SMD DC-DC CONVERTER FEATURES Footprint over pins 1.37cm 2 Short Circuit Protection(automatic recovery) I/O isolation voltage 1000VDC Operating Temperature:
More informationMGJ1 Series 5.7kVDC Isolated 1W SM Gate Drive DC/DC Converters
www.murata-ps.com MGJ1 Series FEATURES Patent pending Optimised bipolar output voltages for IGBT/ SiC & MOSFET gate drives Reinforced insulation to UL69 recognised ANSI/AAMI ES661-1 recognition pending
More informationSilvertel. Ag Features. 2. Description. Power-Over-Ethernet Module for CCTV. IEEE802.3af compliant
Silvertel V2.4 August 202 Datasheet Pb. Features IEEE802.3af compliant Standard CCTV package sizes - 38mm x 38mm x 6mm (H) or 42mm x 42mm x 6mm (H) Low cost Input voltage range 36V to 57V Input diode bridges
More informationSELECTION GUIDE. Nominal Input Order Code Voltage. Output Voltage. Reflected ripple current
www.murata-ps.com NML Series FEATURES RoHS compliant Single isolated output 1kVDC isolation Efficiency up to 85% Wide temperature performance at full 2 watt load, 40 C to 85 C Power density 2.01W/cm 3
More informationSELECTION GUIDE - SINGLE OUTPUT 1. Nominal Input Voltage Output Voltage
www.murata-ps.com SELECTION GUIDE - SINGLE OUTPUT 1 Order Code Nominal Input Voltage Output Voltage Output Current Input Current at Rated Load Load Regulation (Typ) Load Regulation (Max) Ripple & Noise
More informationNMA 5V, 12V & 15V Series Isolated 1W Dual Output DC/DC Converters
www.murata-ps.com NMA 5V, 12V & 15V Series FEATURES Efficiency up to 80% Wide temperature performance at full 1 Watt load, 40 C to 85 C Dual output from a single input rail Industry standard pinout Power
More informationS J
1. Part Number Identification SPECIFICATION Brightek (Europe) Limited S01-2220 - 240 250 J Series Name Inner Code Size 1206~3220 250 250 = 25 10 0 V=25J 1R5 1R5 = 1.5J Breakdown Voltage 240 = 24 10 0 V=24V
More information2R2. Design Code M ±20%
Wire Wound SMD Power Inductors WPN Series Operating Temp. : -40 ~+125 (Including self-heating) FEATURES Fe base metal material core provides large saturation current Metallization on ferrite core results
More informationSELECTION GUIDE. Order code Voltage(VDC) NTE0303XMC NTE0305XMC
1W, FIXED INPUT, ISOLATED SINGLE OUTPUT SMD DC-DC CONVERTER FEATURES Footprint over pins 1.37cm 2 Short Circuit Protection(automatic recovery) I/O isolation voltage 1000VDC Operating Temperature: -40 ~+85
More informationShielded SMD Power Inductor
PCDR 0728 / 0730 / 0732 / 0745 / 1045 PCDR 0628 / 1255 / 1265 / 1275 Features Dimensions Unit:mm -Compact, low profile with low DCR and large current -With magnetically shielded against radiation -Flat
More informationSRP1238A Series - Shielded Power Inductors
*RoHS and AEC-Q COMPLIANT Features Shielded construction Carbonyl powder core High saturation current Inductance range:.1 to 1 µh AEC-Q compliant RoHS compliant* and halogen free** SRP1A Series - Shielded
More informationSELECTION GUIDE. Nominal Input Order Code Voltage. Output Voltage. Reflected ripple current
www.murata-ps.com FEATURES RoHS compliant Efficiency up to 82% Wide temperature performance at full 1 Watt load, 40 C to 85 C UL 94V-0 package material Reduced footprint at 0.98cm 2 Industry standard pinout
More informationSELECTION GUIDE. Nominal Input Voltage. Voltage. Output. Order Code. Voltage range. Reflected ripple current. Isolation test voltage
www.murata-ps.com CME Series SELECTION GUIDE FEATURES Single Isolated output 1kVDC or 3kVDC option Wide temperature performance at full 1 Watt load -40 C to 85C Industry Standard Pinout 3.3V and 5V Inputs
More informationNMA 5V, 12V & 15V Series Isolated 1W Dual Output DC/DC Converters
NMA 5V, 12V & 15V Series FEATURES RoHS compliant Effi ciency up to 80% Power density up to 0.85W/cm 3 Wide temperature performance at full 1 Watt load, 40 C to 85 C Dual output from a single input rail
More information16 ~ 250 VDC -40 ~ +105 C 820~250000µF ± 20% For capacitance values > 33000µF, add the value of:
T-HA Series 105 C, 3000 hours Long Life - endurance rating of 3000 hours at 105 C 4 or 5 terminal mounting provides stability and keyed polarity Extended higher CV ratings RoHS Compliant Rated Working
More informationCOMPACT SHIELDED SMD POWER INDUCTOR FOR AUTOMOTIVE
FEATURES APPLICATIONS Low profile 3mm height for compact applications Advanced and high reliability wire-wound construction Shielded construction reduces EMI Automotive grade power inductor TS-16949 qualified
More information2R2. 4 Nominal Inductance Packing Tape & Reel. Design Code M ±20%
Wire Wound SMD Power Inductors WPN Series Operating temperature range : -40 ~+125 (Including self-heating) FEATURES Fe base metal material core provides large saturation current Metallization on ferrite
More informationNMH Series Isolated 2W Dual Output DC/DC Converters
www.murata-ps.com NMH Series SELECTION GUIDE Order Code Nominal Input Voltage Output Voltage Output Current Input Current at Rated Load Efficiency Isolation Capacitance MTTF1 V V ma ma % pf khrs Package
More informationMEA1 Series 1kVDC Isolated 1W Dual Output DC/DC Converters
www.murata-ps.com MEA1 Series FEATURES UL 695 recognised Typical efficiency to 89.5% 1kVDC isolation Hi Pot Test Wide temperature performance at full 1 Watt load, 4 C to 85 C Industry standard pinout Power
More informationSFI Electronics Technology
1. Part Number Identification SFI 2220 SA 240 250 J Company Logo Inner Code Size 1206~3220 SA SHA Series 250 250 = 25 10 0 V=25J 1R5 1R5 = 1.5J Breakdown Voltage 240 = 24 10 0 V=24V 151 = 15 10 1 V=150V
More informationMolded Chip Wirewound Inductors
FEATURES EIA SIZES A (1210), B (1812), C (1008) AND D (0805) EXCELLENT HIGH Q AND HIGH CHARACTERISTICS BOTH FLOW AND REFLOW SOLDERING APPLICABLE HIGH INDUCTANCE AVAILABLE IN SMALL SIZE EMBOSSED PLASTIC
More informationINPAQ Global RF/Component Solutions
WIP252012Q ZF Series Specification Product Name Series Power Inductor WIP252012Q ZF Series Size EIAJ 2520 WIP252012Q ZF Series Engineering Specification 1. Feature This specification applies Low Profile
More informationSurface Mount Shielded Power Inductors
SCRB Series ( ------SCRB Applications( : Features( : 1, To be high saturation for surface mounting.( 2, Surface mount inductor with high current rating.( 3.Low resistance to keep power loss minimum.( 4,
More informationCMR Series Isolated 0.75W Single and Dual Output Isolated DC/DC Converters
www.murata-ps.com CMR Series SELECTION GUIDE FEATURES Short circuit protection options UL 60950 recognised Single or Dual Isolated Outputs 1kVDC or 3kVDC options Hi Pot Test Wide temperature performance
More informationWire Wound Chip Inductor (Ferrite) Standard LN1210 LN1812
Wire Wound Chip Inductor (Ferrite) Standard LN1210 LN1812 Wire Wound Chip Inductor (Ferrite) - Standard Features Very strong solderability by flow soldering, soldering iron or wave soldering Highly accurate
More informationLatching SPST EPIC Sealed Contactor Amp Power Switching RoHS Compliant, all date codes
Latching SPST EPIC Sealed Contactor - 350+ Power Switching RoHS Compliant, all date codes Patent Pending Latching version of GIGAVAC GX14. Chassis level UL508 sized power terminals No need for specially
More informationSELECTION GUIDE. Nominal Input Voltage. Output Current. Output Voltage. Reflected ripple current
www.murata-ps.com SELECTION GUIDE Order Code Nominal Input Voltage Output Voltage Output Current Input Current at Rated Load Isolation Efficiency Capacitance MTTF1 V V ma % pf khrs Package Style FEATURES
More informationLANC245.1W12. DC/DC Converter VDC Input 5.1 VDC Output at 2.4A. Features:
DC/DC Converter 18-36 VDC Input 5.1 VDC Output at 2.4A Features: Applications: Distributed Power Architectures Communications Equipment Computer Equipment Work Stations UL TUV CB CE MARK RoHS Compliant
More informationFor capacitance values > 33000µF, add the value of: 3 CV (µa) max. after 5 minutes; C = Capacitance in µf, V = WV ~ k 10k
T-UP Series 85 C, 3000 hours 4 or 5 terminal mounting provides stability and keyed polarity Extended CV ratings Can vent construction RoHS Compliant Rated Working Voltage: Operating Temperature: Nominal
More informationInductors for Power Circuits
Inductors for Power Circuits Wound/STD magnetic shielded CLF series Type: CLF7045 (6.9x7.2 mm) CLF0040 (9.7x0.0 mm) Issue date: September 202 (/4) Inductors for Power Circuits Wound/STD Magnetic Shielded
More informationRated voltage Capacitance Cap. Tol. Suffix Suffix. Crimped taping. Ammo 3 E C Q P R Z. Rated voltage Capacitance 7.5 mm.
Polypropylene Film Capacitor Type: ECQP(Z) Non-inductive construction using Polypropylene film with epoxy resin coating Features Excellent temperature and frequency characteristics Excellent long term
More informationSTANDARD CASE DIMENSIONS: millimeters (inches) W 1 dimension applies to the termination width for A dimensional area only.
L W FEATURES Non-burn safe technology Reliability level: 0.5%/1000 hours at 85ºC 13 case sizes available, standard and low profile Environmentally friendly, RoHS Compliant CV range: 2.2-1000μF / 1.8-10V
More informationRecommended Applications AV equipment, Wireless communication equipment and various types of general electronic equipment.
4. High Power Type PF, PE, PC, PA, PB Features Low DCR and large current capability, suitable for power circuitry. Wire wound, resin molded chip inductor. (PC, PA, PB types) Unique Ceramic Core/Laser-cut
More informationPower Inductor. Non-shielded. PDH Series 2. PD Series 4. PCD Series 7. Packaging Info 10 Environmental Specifications 12
Power Inductor Non-shielded PDH Series 2 PD Series 4 PCD Series 7 Packaging Info 10 Environmental Specifications 12 Tel: 1-888-734-7347 Fax: 919-850-9504 E-mail marketing@seielect.com http://www.seielect.com
More informationShielded SMD Power Inductor
PCS62B / 64B PCS73 / 74 Features 1.5 -High power, High saturation inductors -With magnetically shielded against radiation 5.0 -Directly connected electrode on ferrite core -Highly accurate dimensions for
More informationJapan China. Recommended Applications AV equipment, Wireless communication equipment and various general electronic equipment.
4. High Power Type PF, PC, PA, PB Japan China Features Low DCR and large current, suitable for power circuit. Wire wound and resin molded chip inductor. (PC, PA, PB type) Non wound structure using unique
More informationEPIC Hermetic Sealed DC and AC Contactor Amp Power Switching RoHS Compliant, all date codes
EPIC Hermetic Sealed DC and AC Contactor - 150+ Power Switching RoHS Compliant, all date codes File E320908 All contact ratings and coil versions may not be UL recognized. Contact GIGAVAC for a copy of
More informationSELECTION GUIDE. Nominal Input Voltage. Voltage. Output. Reflected ripple current. Case Temperature rise above ambient ABSOLUTE MAXIMUM RATINGS
MEE3 Series SELECTION GUIDE FEATURES UL 695 recognized RoHS compliant Typical efficiency from 83% Power density 2.68W/cm 3 Wide temperature performance at full 3 Watt load, 4 C to 85 C 3 UL 94V- package
More informationSurface Mount Aluminum Electrolytic Capacitors NACEW Series
FEATURES CYLINDRICAL V-CHIP CONSTRUCTION WIDE TEMPERATURE -55 ~ +105 O C DESIGNED FOR REFLOW SOLDERING MEETS THE REQUIREMENTS OF AEC-Q200* *Contact NIC for supporting test data CHARACTERISTICS Rated Voltage
More informationInput Voltage Range ±10% Output Voltage Accuracy Line Voltage Regulation RSS, RSS8, RSD, RSD10 1.2%/1% of Vin typ.
END OF LIFE Dec.11 Features Unregulated Converters Selection Guide RoHS 5/6 Conform 1kVDC or3kvdc Isolation Options H version Approved for Medical Applications Suitable for Fully Automated Assembly Optional
More informationTantalum Chip Capacitors
FEATURES EXPANDED VALUE RANGE & REDUCED CASE SIZES MOLDED CONSTRUCTION FOR HIGH SOLDERING HEAT RESISTANCE ELEVEN CASE SIZES (J, P, A2, A, B2, B, C2, C, V, D AND E) BOTH FLOW AND REFLOW SOLDERING APPLICABLE
More informationSMD Power Inductor SR0602/SR0603/SR0604 SR0805/SR1006/SR1011/SR1307 Series
SMD Power Inductor SR0602/SR0603/SR0604 SR0805/SR1006/SR1011/SR17 Series CONFIGURATION & DIMENSIONS(m/m) 101 A A FEATURES Excellent solderability and high heat resistance Excellent terminal strength construction
More informationMEE1 Series Isolated 1W Single Output DC/DC Converters
www.murata-ps.com MEE1 Series FEATURES UL69 recognised Operation to zero load Single isolated output 1kVDC isolation Hi Pot Test Efficiency up to 87% typical Wide temperature performance at full 1 watt
More informationFeatures. Figure 1. EFIL-28 Connection Diagram
Description The EFIL-28 Module is an EMI Filter designed for use with Calex DC/DC Converters. Built in a 1/2 brick package for systems with 24VDC and 28VDC nominal input, the EFIL-28 module can provide
More information150 WATT HEW SINGLE SERIES DC/DC CONVERTERS
Features Description The 4:1 Input Voltage 150 W single HEW Series of DC/DC converters provide precisely regulated dc outputs. The output voltage is fully isolated from the input, allowing the output to
More informationSilvertel. Ag Features. 2 Description. Power-Over-Ethernet Module. IEEE802.3af compliant. Small SIL package size - 56mm (L) x 14mm (H) Low cost
Silvertel V2.5 Feb 2014 Datasheet Pb 1 Features IEEE802.3af compliant Small SIL package size - 56mm (L) x 14mm (H) Low cost Input voltage range 36V to 57V Minimal (low cost) external components required
More informationCM45, CM32, CM25, CM20, CM16, CM10 SMT Chip Inductors
*RoHS COMPLIANT 220K Features High resistance to heat and humidity Resistance to mechanical shock and pressure Accurate dimensions for automatic surface mounting Wide inductance range (1.0 nh to 1000 µh)
More informationINDUCTORS SMD POWER INDUCTORS SMD
INDUCTORS, COIS, FITERS & FERRITES INDUCTORS SMD POWER INDUCTORS SMD K AND CK SERIES STANDARD MUTIAYER INDUCTORS Features: Internal printed coil structure that creates a closed magnetic circuit which acts
More informationSurface Mount Shielded Power Inductors
SDRH Series ( ------SDRH Applications( : Features( : 1, To be high saturation for surface mounting.( 2, Surface mount inductor with high current rating.( 3.Low resistance to keep power loss minimum.( 4,
More informationSeries AM5T-Z 5 Watt DC-DC Converter
Click on Series name for product info on aimtec.com s Single Output FEATURES: RoHS compliant Operating temperature -40 o C to + 85 o C 24 Pin DIP Package Input / Output isolation 1500 and 3500VDC High
More informationTMJ Tantalum SMD S1gma TM Series Capacitors
The AVX S1gma TM series is offering a next generation of statistical screening and process control enhancement of tantalum capacitors for professional applications with improved reliability and extremely
More informationSeries AM1P-Z 1 Watt DC-DC Converter
Click on Series name for product info on aimtec.com FEATURES: Series AM1P-Z Models Single output Model Input Voltage (V) RoHS compliant Operating temperature - o C to + 85 o C 8 Pin DIP Package Input /
More informationMYBSP01201ABF Isolated DC-DC converter for PoE PD
Typical unit () FEATURES IEEE802.3af class0 compliant 12W DC-DC converter 37-57V Input Voltage range 14.8 x 26 x 6.2mm Size 84% efficiency (typical) Surface mount module 2250Vdc Input-Output Isolation
More informationNKE Series. Isolated Sub-Miniature 1W Single Output DC/DC Converters FEATURES
www.murata-ps.com NKE Series SELECTION GUIDE Order Code Nominal Input Voltage Output Voltage Output Current Input Current at Rated Load Efficiency Isolation Capacitance MTTF 1 Package Style FEATURES RoHS
More informationRecommended Applications AV equipment, Wireless communication equipment and various types of general electronic equipment.
4. High Power Type PF, PE, PC, PA, PB, LC, LA Features Low DCR and large current capability, suitable for power circuitry. Wire wound, resin molded chip inductor. (PC, PA, PB, LC, LA type) Unique Ceramic
More informationSWITCH MODE TRANSFORMERS SERIES CORE TYPE OUTPUT POWER (W) PAGE
The new exigencies in the applications where the size, height and efficiency of power supply have priority make these transformers the most suitable for an optimal working in high frequency applications
More informationApplication Note TES 1 Series
1W, Miniature SMD, Single & Dual Output DC/DC Converters Features SMD Package with Industry Standard Pinout Small Footprint: 11.0 x 13.7 mm (0.43 x 0.54 ) Single Output Models 11.0 x 16.3 mm (0.43 x 0.64
More informationMetal Alloy Low-Resistance Resistor Specifications
Page 1 of 14 Metal Alloy Low-Resistance Resistor Specifications March 2010 Specification Number:GCT-SPEC-011-11 Issued Date:2010/03/01 Page 2 of 14 1. Scope: 1.1 This specification is covered following
More informationGlass Encapsulated SMD Varistor MLV
(VJ12, 2, 13, 14, 15, 32) Transient Voltage Suppression, ESD Protection Devices & EMI Devices GENERAL DESCRIPTION AVX s Professional Multilayer Varistors include 3 series of glass coated products as listed
More information(TCRC) Power Choke Coil Inductors. Token Electronics Industry Co., Ltd. Version: July 31, Web:
Version: July 31, 2017 (TCRC) Power Choke Coil Inductors Token Electronics Industry Co., Ltd. Web: www.token.com.tw Email: rfq@token.com.tw Taiwan: No.137, Sec. 1, Zhongxing Rd., Wugu District, New Taipei
More informationCOMPACT SHIELDED SMD POWER INDUCTOR FOR AUTOMOTIVE
FEATURES APPLICATIONS High reliability wire-wound construction Shielded construction reduces EMI Automotive grade power inductor TS-16949 qualified production PPAP level 3 support AEC-Q200 qualified with
More information