5.0Max. 154 to to to 124

Size: px

Start display at page:

Download "5.0Max. 154 to to to 124"

Eileen Phillips
6 years ago
Views:

1 4- Dimensions Characteristic graph POLYESTER ILM CAPACITOR Type Very small size, especially in dimension, which is advantageous to save space of PC Board. Good reputations for use in general and industrial application. Small allowance in the lead pitch dimensions. Suitable for automatic insertion due to their small size and light weight. Temp range -4 to +85 C (+5 C) Tangent of loss angle.8 or less (at kz) Voltage 5V, V, 5V, 4V.d.c Insulation resistance 3,MΩ or more 5V. to.5μ (C<.47μ:E-,C.47μ:E-) V. to.47μ (C<.47μ:E-,C.47μ:E-) Capacitance 5V. to.μ (E-) Endurance 4V. to.μ (E-) Cap. tolerance ±5%(J), ±%(K) Damp heat *( ) Marked temperature shows an operational range when a voltage is derated. 85 C.V. 4% hr C/C ±3%within tanδ.or less IR 45MΩ or more 4 C 9 to 95%R.V.hr C/C + -%within tanδ. or less IR 9MΩ or more Straight lead type Single formed lead type Max Max T Style.Max Max P Min ±.5 ±.5 5.Max 5.±.5 ±.5 5.Max 5.±.5 ±.5.Max 5.± V -. V~4V ±.5 5V.d.c to 54 to 54 to 333 Cap range V.d.c 5V.d.c to 474 to 83 to 474 to to to 4 4V.d.c to 473 to to 4 or a pitch space() of the taping specification, refer to TAPAING DEMENSIONS Taping dimensions

2 4- eatures Characteristic graph POLYESTER ILM CAPACITOR Type Dimensions(mm) Capacitors Code Cap(µ) 5V.dc V.dc T P T P / / / / / / / /7.5.

3 4-3 eatures Characteristic graph POLYESTER ILM CAPACITOR Type Dimensions(mm) Capacitors Code Cap(µ) 5V.dc 4V.dc T P T P / / / / / / / / / / / / / / / / / / / / /..

4 4-4 eatures Dimensions POLYESTER ILM CAPACITOR Type Characteristics of permissible current to frequency 5V V Permissible Current (Arms) Permissible Current (Arms) requency (kz) requency (kz) 5V 4V Permissible Current (Arms) Permissible Current (Arms) requency (kz) requency (kz)

5 4- PART NUMBER SEQUENCE Internal code Model code Series code Lead configuration Rated voltage code Capacitance Nominal capacitance (Standard "") Lead dimensions code / code tolerance code value code Packaging configulation code Lead configuration code Lead dimension code / Packing configuration code(* ) Code Lead configuration Typical code example Description * Straight, long leads, bulk A code for products with straight leads (bulk packaging) is "". C Straight, long leads, bulk 5 or products with cut leads, dimension codes have been set according to length Single formed leads, bulk Lead spacing (mm) Code Lead spacing (mm) Code ( * 3) Each code stands for the spacing between leads of a product with formed leads. (bulk) S ormed leads, taped V ormed leads, taped SMD, taped ormed leads type 4 Style Code ( * 4) D D D A code stands for the configuration taping. (Ammo packaging) or more information, see a taping specification for automatic mounting. A code stands for the configuration taping. or more information, see a taping specification for automatic mounting. * A blank stands for straight leads. * Depending on types, there might be exception out of this role. Confirm when ordering. *3 A code for Cap 47 to 33 of series with model code of is defined as I5. *4 A code for Cap 47 to 33 of series with model code of is defined as A. Rated voltage code(v.d.c, V.a.c) Voltage code Capacitance tolerance code Code G J K M Capacitance tolerance(%) ± ± ±3 ±5 ± ± Nominal capacitance value code This is expressed in p by using a three figures. The first two figures : Significant figures of nominal capacitance value. The third figures : The number of zeros to follow the significant figures. Example ) hen ordering capacitors with single-formed leads of 5V,.µ±5%, taped and ammo-packaged. A (Standard "") Internal use Model code ) hen ordering capacitors with single-formed leads of 5.mm of MMC 5V,.µ±.%, in bulk. M M ZV 5 J 4 M C 5 Internal use Model code 3) hen ordering capacitors with straight leads of 5V.µ±5%, in bulk. MM T 5 J 4 3 K 5 (Standard "") (Standard "") 5 Internal use 4 Model code 5

6 4- TE RACTERISTICS O CAPACITORS The characteristics vary according to ratings of capacitance, voltage and so on. Examples of the characteristics of capacitors with a capacitance value of.µ are shown below. requency Characteristics C C Rate of capacitance drift (%) - - C/C-f tanδ Tangent of loss angle 5 tanδ-f MM(*) AS APS 4 3 MM (*) AS APS impeadance(ω) Impedance Z-f Cap.Ω Cap.Ω Cap.Ω requency (z) Temperature characteristics C C Rate of capacitance drift C/C-Temp (%) MM ( * ) AS 4 APS requency (z) IR tanδ (MΩ) Tangent of loss angle tanδ-temp Insulation resistance IR-Temp.4 8. MM ( * ) AS APS 7 MM ( * ) AS APS 7 8 requency (z) Temperature ( C) Temperature ( C) ight-temperature endurance with load C C Rate of capacitance drift 3 C/C-Time (%) MM(*) AS APS Temperature ( C) IR Temp 85 C tanδ (MΩ) Tangent of loss angle.8 tanδ-time Temp 85 C 8 Insulation resistance IR-Time Temp 85 C MM (*) AS APS 7 MM(*) AS APS ,,5, Damp heat endurance with load C C Rate of capacitance drift C/C-Time (%) 8 MM (*) AS APS Temp.4 C umid 95% 5,,5,. 4 5,,5, Temp.4 C IR tanδ (MΩ) Tangent or loss angle tanδ-time umid 95% Insulation resistance IR-Time.8.8 MM(*).7 AS APS.7. MM (*) AS APS Temp.4 C umid 95% ,,5, 5,,5, ,,5,5,75,

7 - 3 SPECIICATIONS O TAPING OR AUTOMATIC INSERTION Standard-taping dimensions(mm) Straight ormed Lead Type Type V Lead Type Style Style Style3 Style4 Style5 Style 5 47to4 47 to4 5 to54 to54 to4 to4 4 to84 4to to84 4to474 5 to to83 83 to84 393to83 83 to84 4 to3 3 to to83 3to to83 AM 5 to54 APS to33 393to4 393 to4 5 to3 4 to3 AS 5 7to4 7to4 4to84 4to34 4to84 4to34 8to 73 8to to83 4to4 333 to83 4to4 5 3 to5 3to to5 3 to55 3to5 5 3to4 MT 5 3 to55 MM 333to to5 5to5 54 to5 5to to83 83to4 74to84 83to4 74to to83 4 to394 3 to83 4to394 3 to to4 to to4 to3 to3 5 to8 to8 MMC 5 to54 84 to to5 84 to to55 4/45 to to4 4to to4 4to474 3 to8 3to to4 3 to to4 MMX 5 to to84 394to5 394to84 84 to395 4 to4 4to474 4to5 4to474 54to to474 4 to5 4to to5 3 to to4 53to394 53to4 74to54 MMD 5 3to83 83to4 74 to474 83to4 74to to to84 3to473 53to4 MML 5 3to4 74to84 84to to84 84to to to4 4to to4 4to84 5 3to93 3to334 3to93 4to to93 3to 4 3to93 4to54 4/45 3to93 3to74 3to93 4to34 3 3to33 3to53 3to33 333to4 8 to33 to4 to33 to4 5 to3 to53 to9 to3 NSM /5 Packaging style T L L T or, L is 335, is 3555, T is 455(mm) Reel packing avaiable in Style. Please contact Nissei for detailed assistance.

8 L 4-3 SPECIICATIONS O TAPING OR AUTOMATIC INSERTION Standard-taping dimensions(mm) Type V Straight Lead Type ormed Lead Type Style Style Style3 Style4 Style5 Style 5 47to4 47 to4 5 to54 to54 to4 to4 4 to84 4to to84 4to474 5 to to83 83 to84 393to83 83 to84 4 to3 3 to to83 3to to83 AM 5 to54 APS to33 393to4 393 to4 5 to3 4 to3 AS 5 7to4 7to4 4to84 4to34 4to84 4to34 8to 73 8to to83 4to4 333 to83 4to4 5 3 to5 3to to5 3 to55 3to5 5 3to4 MT 5 3 to55 MM 333to to5 5to5 54to5 5to to83 83to4 74to84 83to4 74to to83 4 to394 3 to83 4to394 3 to to4 to to4 to3 to3 5 to8 to8 MMC 5 to54 84 to to5 84 to to55 4/45 to to4 4to to4 4to474 3 to8 3to to4 3 to to4 MMX 5 to to84 394to5 394to84 84 to395 4 to4 4to474 4to5 4to474 54to to474 4 to5 4to to5 3 to to4 53to394 53to4 74to54 MMD 5 3to83 83to4 74 to474 83to4 74to to to84 3to473 53to4 MML 5 3to4 74to84 84to to84 84to to to4 4to to4 4to84 5 3to93 3to334 3to93 4to to93 3to 4 3to93 4to54 4/45 3to93 3to74 3to93 4to34 3 3to33 3to53 3to33 333to4 8 to33 to4 to33 to4 5 to3 to53 to9 to3 NSM /5 Packaging style Ammo Pack L T 3±7 3±7 3±7 3±7 3±7 3±7 45±5 5±5 55±5 or, L is 33±7, is 355±7, T is 45±5(mm) Reel packing avaiable in Style. Please contact Nissei for detailed assistance. T

9 t 4-4 TAPAING SPECIICATIONS OR AUTOMATIC INSERTION Taping specification by type Shape Straight Lead Type P.7±. P.7±.3 P 4. or 3.85±.7 P.35±.3 See the list of dimensions shown by type. 3.5 or 5. or h ± Min. 9.±.5 3. Max. D 4.±. t.7±. 8.5±.5 P P Style P P D *or NSMS -dimension is.±5 mm. or taped products, order in an integral multiple of quantity packaged in a box. or bulk (both products with straight leads and formed leads), order in an integral multiple of pieces. Standard-taping dimensions (mm) Shape ormed Lead Type Style Style Style 5 P.7±. 5.±. 5.±. P.7±.3 5.±.3 5.±.3 P 3.85±.7 5.± ±.7 P.35±.3 7.5±.3 7.5±.3 See the list of dimensions shown by type h ±. ±. ± Min. 5. Min. 5. Min. 9.±.5 9.±.5 9.±.5 3. Max. 3. Max. 3. Max..±.5.±.5.±.5 D 4.±. 4.±. 4.±. t.7±..7±..7±..5 Max.. Max.. Max. Shape ormed Lead Type Style 3 Style 4 Style P 5.4±. 3.±. 3.±. P.7±.3 5.±.3 5.±.3 P 3.85±.7 5.± ±.7 P.35±.3 7.5±.3 7.5±.3 See the list of dimensions shown by type h ±. ±. ± Min. 5. Min. 5. Min. 9.±.5 9.±.5 9.±.5 3. Max. 3. Max. 3. Max..±.5.±.5.±.5 D 4.±. 4.±. 4.±. t.7±..7±..7±.. Max.. Max.. Max. P P h P P Shape P Shape P P D P D

10 4-5 SPECIICATIONS O TAPING OR AUTOMATIC INSERTION CIP Type Taping Dimensions(mm) Taping dimensions of chip type (mm) Type V Size Cap A B C E T P P P d d 5 to 8.45 to..3 to..5±. 8. to. 3.5±.5.75±..5±.5 4.±. 4.±. 4.±..5+./-.±. 5 8,3.55 to..3±. 3 to 3.9±. 3.5 to..±..±. V.dc 3 73,333.3± ,473.± to 83.8 to..8± ±. 5 to 7.55 to..3 to..5±..± to 3.9±. 3.5 to..3±..± to 83.8 to. 35 3,73.8± ,393.3±. 5V.Dc ,53 5. to..±..±. 5.5±.5 8.±..7± ,83.9± ± to..45±..±..3± ,84.± ±. 3 to 3.9±. 3.5±..3±. 8.±. 3.5±.5.5±.5 4.±..± to 83.8 to. 35 3,73.8± ,393.3±. V.dc ,53 5.±..±..±. 5.5±.5 8.±..7± ± ,4.± to..45±..±..3± ,84.± ±. φd P P E T B A P φd C Reel dimensions(mm) Type V Size Cap A B C D r 5 to3 8+/-3 ±. ±.8 3±..±.5 9.±.5.4 ±. V.dc 3 to to4 5 to to3 5V.dc 35 3 to to4 33±. 8±. 3.4 ±. 7.4 ±. 4 4 to4 3 to3 8+/-3.±. 9. ±.5.4±. V.dc 35 3 to to4 33±. 8±. 3.4 ±. 7.4±. 4 4 to4 C r A D B

METALLIZED POLYESTER FILM CAPACITOR

METALLIZED POLYESTER FILM CAPACITOR Dimensions Characteristic graph 4-39 METALLIZED POLYESTER ILM CAPACITOR Type MMC eatures Smaller version of MM type. Very small size, achieved by our unique manufacturing method. ighly reliable because