Surface Mount Aluminum Electrolytic Capacitors
|
|
|
- Rolf Snow
- 6 years ago
- Views:
Transcription
1 CYLINDRICL VCHIP CONSTRUCTION FOR SURFCE MOUNTING VERY LOW IMPEDNCE WIDE TEMPERTURE RNGE (55 +5 O C) REDUCED SIZE DESIGNED FOR UTOMTIC MOUNTING ND REFLOW SOLDERING MEETS THE REQUIREMENTS OF ECQ200* *Contact NIC for supporting test data See NZT for New Designs Rated Voltage Range Rated Capactance Range Operating Temperature Range Capacitance Tolerance Maximum Leakage Current after 2 20 C Maximum 120Hz/20 C Low Temperature Stability Impedance 120Hz Load Life 5 C 4 ~ mm Dia. 2,000 Hours 8x.5mm 5,000 (Opt.) x.5mm 5,000 (Opt.) 12.5 ~ 18mm Dia. 5,000 Hours 6.3 ~ 0Vdc 3.3 ~ 6,800µF 55 C ~ +5 C ±20%(M) 0.01CV or 3µ, whichever is greater W.V. (Vdc) S.V. (Vdc) C 1,000µF C = 2,200µF ll Case Sizes C = 3,300µF C = 4,700µF C = 6,800µF Z 25 C/Z +20 C Z 40 C/Z +20 C Z 55 C/Z +20 C Capacitance Change Tanδ Leakage Current RoHS Compliant includes all homogeneous materials *See Part Number System for Details Within ±30% of initial measured value Less than 200% of specified maximum value Less than specified maximum value Cap (µf) Code Working Voltage (Vdc) R3 5x R7 4x6.1 4x6.1 5x x x6.1 4x6.1 4x6.1 5x x6.1 5x x x6.1 4x6.1 4x6.1 5x6.1 5x x6.1 5x6.1 8x.5 8x x6.1 5x x1 5x x6.1 8x.5 8x.5 x x6.1 5x x x6.1 5x x6.1 8x.5 x x x x6.1 8x x x x x x6.1 8x.5 8x.5 x x14 16x x6.1 8x.5 8x.5 x x14 16x x6.1 8x.5 8x.5 x x x.5 8x.5 8x.5 x x14 16x17 18x x x.5 8x.5 8x.5 x x14 16x17 16x x.5 x x14 16x x.5 x x14 16x17 16x x x14 16x x14 16x x14 16x x x17 vailable in "Y" Control Option (for utomotive Equipment) 1 NCK rev
2 STNDRD VLUES, CSE SIZES ND SPECIFICTIONS NIC Part Number* Cap. W.V. Dissipaton Factor Max. Ripple Current (m) Max. Impedance (Ω) Load Life Hours (μf) (Vdc) (Tan δ) +5 C/0KHz C NCK220M6.3V4x6.1TR13F ,000 NCK470M6.3V4x6.1TR13F , NCK470M6.3V5x6.1TR13F ,000 NCK1M6.3V5x6.1TR13F ,000 0 NCK1M6.3V6.3x6.1TR13F ,000 NCK221M6.3V6.3x6.1TR13F ,000 NCK331M6.3VTR13F , NCK331M6.3VTR13F , NCK471M6.3V8x.5TR13F ,000 NCK471M6.3V8x.5TR13EF ,000 NCK2M6.3V8x.5TR13F ,000 NCK2M6.3V8x.5TR13EF ,000 NCK152M6.3Vx.5TR13F ,000 NCK152M6.3Vx.5TR13F NCK332M6.3V12.5x14TR13F ,000 NCK682M6.3V16x17TR15F ,000 NCK220MV4x6.1TR13F ,000 NCK330MV4x6.1TR13F , NCK330MV5x6.1TR13F ,000 NCK151MV6.3x6.1TR13F ,000 NCK221MVTR13F , NCK221MVTR13F ,000 NCK331MV8x.5TR13F ,000 NCK331MV8x.5TR13F NCK471MV8x.5TR13F ,000 NCK471MV8x.5TR13F NCK681MV8x.5TR13F ,000 NCK681MV8x.5TR13F NCK2MVx.5TR13F ,000 NCK2MVx.5TR13F NCK222MV12.5x14TR13F ,000 NCK472MV16x17TR15F ,000 NCK0M16V4x6.1TR13F ,000 NCK220M16V4x6.1TR13F , NCK220M16V5x6.1TR13F ,000 NCK470M16V5x6.1TR13F , NCK470M16V6.3x6.1TR13F ,000 NCK680M16V6.3x6.1TR13F ,000 NCK1M16V6.3x6.1TR13F ,000 NCK151M16VTR13F ,000 NCK221M16VTR13F , NCK221M16VTR13F ,000 NCK331M16V8x.5TR13F ,000 NCK331M16V8x.5TR13F NCK471M16V8x.5TR13F ,000 NCK471M16V8x.5TR13F NCK681M16Vx.5TR13F ,000 NCK681M16Vx.5TR13F NCK152M16V12.5x14TR15F ,000 NCK332M16V16x17TR15F ,000 NCK0M25V4x6.1TR13F ,000 NCK220M25V5x6.1TR13F ,000 NCK330M25V5x6.1TR13F , NCK330M25V6.3x6.1TR13F ,000 NCK470M25V6.3x6.1TR13F ,000 NCK680M25V6.3x6.1TR13F ,000 NCK1M25VTR13F ,000 vailable in "Y" Control Option (for utomotive Equipment) *See part numbering system for how to denote WT termination style 2
3 STNDRD VLUES, CSE SIZES ND SPECIFICTIONS NIC Part Number* Cap. W.V. Dissipaton Factor Max. Ripple Current (m) Max. Impedance (Ω) Load Life Hours (μf) (Vdc) (Tan δ) +5 C/0KHz C NCK1M25VTR13F ,000 NCK151M25V8x.5TR13F ,000 NCK151M25V8x.5TR13F NCK221M25V8x.5TR13F ,000 NCK221M25V8x.5TR13F NCK331M25V8x.5TR13F ,000 NCK331M25V8x.5TR13F NCK471M25Vx.5TR13F ,000 NCK471M25Vx.5TR13F NCK2M25V12.5x14TR15F ,000 NCK222M25V16x17TR15F ,000 NCK4R7M35V4x6.1TR13F ,000 NCK0M35V4x6.1TR13F ,000 NCK0M35V5x6.1TR13F ,000 NCK220M35V5x6.1TR13F ,000 NCK330M35V6.3x1TR13F ,000 NCK470M35V6.3x6.1TR13F ,000 NCK680M35VTR13F ,000 NCK1M35VTR13F ,000 0 NCK1M35V8x.5TR13F ,000 NCK1M35V8x.5TR13F NCK151M35V8x.5TR13F ,000 NCK151M35V8x.5TR13F NCK221M35V8x.5TR13F ,000 NCK221M35V8x.5TR13F NCK331M35Vx.5TR13F ,000 NCK331M35Vx.5TR13F NCK471M35V12.5x14TR15F ,000 NCK681M35V12.5x14TR15F ,000 NCK2M35V16x17TR15F ,000 NCK152M35V16x17TR15F ,000 NCK4R7M50V4x6.1TR13F ,000 NCK0M50V5x6.1TR13F ,000 NCK0M50V6.3x6.1TR13F ,000 NCK220M50V6.3x6.1TR13F ,000 NCK330M50VTR13F , NCK330M50VTR13F ,000 NCK470M50VTR13F , NCK470M50VTR13F ,000 NCK1M50V8x.5TR13F ,000 NCK1M50V8x.5TR13F NCK151M50Vx.5TR13F ,000 NCK151M50Vx.5TR13F NCK221M50Vx.5TR13F ,000 NCK221M50Vx.5TR13F NCK331M50V12.5x14TR15F ,000 NCK391M50V12.5X14TR13F ,000 NCK471M50V16x17TR15F ,000 NCK681M50V16x17TR15F ,000 NCK2M50V16x17TR15F ,000 NCK4R7M63V5x6.1TR13F ,000 NCK0M63V6.3x6.1TR13F ,000 NCK220M63VTR13F , NCK220M63VTR13F ,000 NCK330M63V8x.5TR13F ,000 NCK470M63V8x.5TR13F ,000 vailable in "Y" Control Option (for utomotive Equipment) *See part numbering system for how to denote WT termination style 3
4 STNDRD VLUES, CSE SIZES ND SPECIFICTIONS NIC Part Number* Cap. W.V. Dissipaton Factor Max. Ripple Current (m) Max. Impedance (Ω) Load Life Hours (μf) (Vdc) (Tan δ) +5 C/0KHz C NCK680M63V8x.5TR13F ,000 NCK1M63Vx.5TR13F , NCK221M63V12.5x14TR13F ,000 NCK471M63V16x17TR15F ,000 NCK3R3M80V5x6.1TR13F ,000 NCK4R7M80V6.3x6.1TR13F ,000 NCK0M80VTR13F ,000 NCK0M80VTR13F ,000 NCK220M80V8x.5TR13F ,000 NCK330M80V8x.5TR13F ,000 NCK470M80Vx.5TR13F ,000 NCK680M80V12.5x14TR15F ,000 NCK1M80V12.5x14TR15F ,000 NCK151M80V12.5x14TR15F ,000 NCK331M80V16x17TR15F ,000 NCK220M0V8x.5TR13F ,000 NCK330M0Vx.5TR13F ,000 NCK470M0V12.5x14TR15F ,000 NCK680M0V12.5x14TR15F ,000 NCK1M0V16x17TR15F ,000 NCK151M0V16x17TR15F ,000 NCK331M0V18x17TR13F ,000 vailable in "Y" Control Option (for utomotive Equipment) *See part numbering system for how to denote WT termination style Frequency 60Hz 120Hz 1KHz KHz 0KHz Correction Factor PRT NUMER SYSTEM NCK 1 M 50V 8x.5 TR 13 P E WT Y F RoHS Compliant Series Opt. WT = Wide Terminal Opt. 5,000 hour (8x.5 & x.5) Optional plastic reel (standard material is cardboard). See page 5 & 6 13 = 13" (330mm) Reel, 15 = 15" (380mm) Reel Tape & Reel Size in mm Working Voltage Tolerance Code M=20% Capacitance Code in μf, first 2 digits are significant Third digit is no. of zeros, R indicates decimal for values under µf Optional: Suitable for automotive equipment, sourced to special production and inspection at TS16949 certified production site Review & Compare Reflow Soldering Heat Limits Vchip SMT luminum Electrolytic Capacitors PRECUTIONS Please review the notes on correct use, safety and precautions found at If in doubt or uncertainty, please review your specific application process details with NIC s technical support personnel: tpmg@niccomp.com 4
5 COMPONENT DIMENSIONS Case Size Dφ ±0.5 L max., H max. I ±0.3 P ±0.3 W K R S T 4x ± ± ± 0.2 5x ± ± ± x ± ± ± ± ± ± ± ± ± 0.2 WT ± ± ± ± ± ± 0.2 8x ± ± /0.5 8x.5WT ± ± ± ± ± ± 0.2 x ± ± /0.5 x.5wt ± ± ± ± ± ± 0, x ± ± / x14WT ± ± ± ± ± ± x ± ± /0.4 16x17WT ± ± / ± ± ± x ± ± ± x17WT ± ± ± ± ± ± 0.2 ntivibration Skirt on WT Style 8mm ~ 18mm Dia. Dφ STNDRD TERMINTION WT STYLE TERMINTION + I I + I I W K W K L Termination deflection: Standard = ±0.30mm WT = +0.15mm/0.05mm P H P RECOMMENDED LND PTTERN (mm) STNDRD TERMINL Case Dia. a b c 4x x x x x x x x RECOMMENDED LND PTTERN (mm) WIDE TERMINL Case Dia. d e f STNDRD TERMINTION Solder Pads + b a b WT STYLE TERMINTION Solder Pads Support Terminals c WT x.5WT x.5wt f 12.5x14WT x17WT x17WT e d e 5
6 Test Method D Capacitance Tangent of Loss Leakage Current WT (Wide Terminations) ntivibration Test Direction: X, Y, Z axis Frequency & Duration: 5 to 2000Hz reciprocation for 20 minutes, 2 hours each direction Peak to Peak mplitude: 5mm Peak cceleration: 30G Sweep Type: Log Within ± % of initial value < Specified value < Specified value CRRIER TPE Case Size ±0.5 ±0.2 C ±0.3 D ±0.1 P ±0.1 T ±0.2 4x x x WT x.5 8x.5WT x.5 x.5wt x x14WT x17 16x17WT x17 18x17WT TPING SPECIFICTIONS (mm) 1. oth Leader and Trailer tape: Minimum 40mm (1.57") empty carrier tape pockets. 2. Leader tape: pproximately 20cm of cover tape at leader. 3. Connection: Maximum 3 connections (slices) per reel CRRIER TR13 330mm (13") REEL TR15 380mm (15") REEL (see page 8 for plastic reel specifications) Case Size W ±1.0 Quantity Per Reel 13" Reel 15" Reel 4x ,200 pcs 2,000 pcs 5x pcs 1,000 pcs 6.3x pcs 1,000 pcs pcs 900 pcs pcs 1,000 pcs 8x pcs 500 pcs x pcs 500 pcs 12.5x pcs* 250 pcs* 16x pcs* 200 pcs* 18x pcs 150 pcs *See specific part number in standard values tables for available reel diameter φ+0.1/ ± P Feeding CRDORD REEL T 3.0 ± Min. 330 or 380mm 13 ±0.5 D C 2.0± ±0.8 6 W
7 Optional VChip 13" (330mm) Plastic Reels (TR13P suffix) W2 W1 Dimensions (mm) Case Size Tape Width W1 W2 4x6.1, 5x ~ ~ x6.1,, ~ ~ x.5, x ~ ~ x ~ ~ x17, 18x ~ ~ 50.4 Case Size Tape Width C D E 4x6.1, 5x x6.1,, 16.0 f330 ±2.0 f50~5 f13 f x.5, x ±0.5 ±1.0 ± x x17, 18x E Color lack or lue D C Optional VChip 15" (380mm) Plastic Reels (TR15P suffix) Dimensions (mm) Case Size Tape Width W1 W2 4x6.1, 5x ~ ~ x6.1,, ~ ~ x.5, x ~ ~ x ~ ~ x17, 18x ~ ~ 50.5 W2 W1 Case Size Tape Width C D E 4x6.1, 5x x6.1,, 16.0 f380 f13 f f80~5 8x.5, x ±2 ±0.5 ±1.0 ± x x17, 18x E Color lack or lue C D Case Size Quantity Per Reel 13" Reel 15" Reel 4x6.1 1,200 pcs 2,000 pcs 5x pcs 1,000 pcs 6.3x pcs 1,000 pcs 500 pcs 900 pcs 800 pcs 1,000 pcs 8x pcs 500 pcs x pcs 500 pcs 12.5x pcs* 250 pcs* 16x pcs* 200 pcs* 18x pcs 150 pcs *See specific part number in standard values tables for available reel diameter. 7
Surface Mount Aluminum Electrolytic Capacitors NACEW Series
FEATURES CYLINDRICAL V-CHIP CONSTRUCTION WIDE TEMPERATURE -55 ~ +105 O C DESIGNED FOR REFLOW SOLDERING MEETS THE REQUIREMENTS OF AEC-Q200* *Contact NIC for supporting test data CHARACTERISTICS Rated Voltage
Surface Mount Aluminum Electrolytic Capacitors
FEATURES CYLINDRICAL V-CHIP CONSTRUCTION FOR SURFACE MOUNTING VERY LOW IMPEDANCE & HIGH RIPPLE CURRENT AT 100KHz SUITABLE FOR DC-DC CONVERTER, DC-AC INVERTER, ETC. NEW EXPANDED CV RANGE, UP TO 6800μF NEW
Surface Mount Aluminum Electrolytic Capacitors
FETURES YLINDRIL V-HIP ONSTRUTION FOR SURFE MOUNTING REDUED SIZE VILLE WITH NTI-VIRTION TERMINTIONS (8 & 10mm DIMETER) SUIT FOR HIGH TEMPERTURE REFLOW SOLDERING (UP TO 260 ) 2,000 HOUR LOD LIFE @ +105
Surface Mount Aluminum Electrolytic Capacitors
FEATURES CYLINDRICAL V-CHIP CONSTRUCTION LOW COST, GENERAL PURPOSE, 2000 HOURS AT 85 O C NEW EXPANDED CV RANGE (up to 6800µF) ANTI-SOLVENT (2 MINUTES) DESIGNED FOR AUTOMATIC MOUNTING AND REFLOW SOLDERING
Surface Mount Aluminum Electrolytic Capacitors NACZF Series
FETURES YLINRIL LELESS TYPE FOR SURFE MOUNTING HIGH PITNE VLUES (UP TO 6800µF) LO IMPENE/HIGH RIPPLE URRENT T 100KHz 12.5mm x 17mm ~ 18mm x 22mm SE SIZES IE TERMINTION STYLE FOR HIGH VIRTION.PPLITIONS
Surface Mount Aluminum Electrolytic Capacitors
FEATURES CYLINDRICAL V-CHIP CONSTRUCTION FOR SURFACE MOUNTING AVAILALE ITH ANTI-VIRATION IDE TERMINATIONS VERY LO IMPEDANCE & HIGH RIPPLE CURRENT AT 100KHz EXTENDED LOAD LIFE (2,000 ~ 5,000 HOURS @ +105
Surface Mount Aluminum Electrolytic Capacitors
FETURES YLINRIL V-HIP ONSTRUTION LONG LIFE (7,000 ~ 10,000 HOURS) IE TEMPERTURE RNGE (-25 ~ +105 ) ESIGNE FOR REFLO SOLERING RoHS ompliant includes all homogeneous materials *See Part Number System for
Surface Mount Aluminum Electrolytic Capacitors
FEATURES CYLINDRICAL V-CHIP CONSTRUCTION LOW COST, GENERAL PURPOSE, 2000 HOURS AT 85 O C NEW EXPANDED CV RANGE (up to 6800μF) ANTI-SOLVENT (2 MINUTES) DESIGNED FOR AUTOMATIC MOUNTING AND REFLOW SOLDERING
Surface Mount Aluminum Electrolytic Capacitors
FEATURES YLINDRIAL V-HIP ONSTRUTION FOR SURFAE MOUNTING AVAILALE WITH ANTI-VIRATION WIDE TERMINATIONS VERY LOW IMPEDANE & HIGH RIPPLE URRENT AT 100KHz EXTENDED LOAD LIFE (2,000 ~ 5,000 HOURS @ +105 ) SUITALE
Surface Mount Aluminum Electrolytic Capacitors
FETURES YLINRIL V-HIP ONSTRUTION FOR SURFE MOUNTING SUIT FOR HIGH TEMPERTURE REFLOW SOLERING (UP TO 260 ) 2,000 HOUR LO LIFE @ +85 ) ESIGNE FOR UTOMTI MOUNTING N REFLOW SOLERING HRTERISTIS Rated Voltage
Miniature Aluminum Electrolytic Ca pac i tors
ULTRA LOW IMPEDANCE, RADIAL LEADS, POLARIZED, ALUMINUM ELEC TRO LYT IC FEATURES VERY LOW IMPEDANCE LONG LIFE AT 105 C (1000 ~ 5000 hrs.) HIGH STABILITY AT LOW TEMPERATURE IDEALLY FOR SWITCHING POWER SUPPLIES
Large Can Aluminum Electrolytic Capacitors
FEATURES LONG LIFE AT +105 C (2,000 ~ 3,000 HOURS) HIGH RIPPLE CURRENT HIGH VOLTAGE (UP TO 500VDC) SUITABLE FOR SWITCHING POWER SUPPLIES SPECIFICATIONS *See System for Details Operating Temperature Range
Technical Support: Voltage Capacitance Alternate Suggested Replacement Part Numbers NPC101M2D5ZATRF 2VDC 100uF
www.niccomp.com/pcn Technical Support: tpmg@niccomp.com October 28 th 2016 SUB: EOL End of Life Notification Products impacted by this notice: NPC Series SMT Solid Polymer Aluminum Electrolytic Capacitors
Type AHA SMT Aluminum Electrolytic Capacitors -55 C to +105 C - Long Life
Long Life Filtering, Bypassing, Power Supply Decoupling Capacitors deliver twice the life of many SMT aluminum capacitor types, and they handle high levels of ripple current. The AHA can handle the ripple
Type AVS SMT Aluminum Electrolytic Capacitors - General Purpose, 85 C
General Purpose Filtering, Bypassing, Power Supply Decoupling Specifications Operating Temperature: Rated voltage: Capacitance: D.F. (@ 20 C): Capacitance Tolerance: Leakage Current: Ripple Current Multipliers:
High Power Thin Film Chip Resistors
FETURES IMPROVE POWER RTING (HIGHER THN NTR SERIES) PRECISE TOLERNCE N TEMPERTURE COEFFICIENT EI STNR CSE SIZES (0603 ~ 2512) LOW NOISE, THIN FILM (NiCr) CONSTRUCTION REFLOW SOLERLE (Pb FREE TERMINTION
55 C to +105 C 6.3, 10, 16, 25, 35, 50, 63, 80 & 100 Vdc. Shelf Test: C. 0.3 mm Max. A
Type AFK 55 C to 5 C SMT Aluminum Electrolytic Capacitors - Lowest E.S.R., 5 C Low Impedance and Long-Life for Filtering, Bypassing and Power Supply Decoupling Specifications Life Test: Operating Temperature:
16 ~ 250 VDC -40 ~ +105 C 820~250000µF ± 20% For capacitance values > 33000µF, add the value of:
T-HA Series 105 C, 3000 hours Long Life - endurance rating of 3000 hours at 105 C 4 or 5 terminal mounting provides stability and keyed polarity Extended higher CV ratings RoHS Compliant Rated Working
Tantalum Chip Capacitors
FEATURES EXPANDED VALUE RANGE & REDUCED CASE SIZES MOLDED CONSTRUCTION FOR HIGH SOLDERING HEAT RESISTANCE ELEVEN CASE SIZES (J, P, A2, A, B2, B, C2, C, V, D AND E) BOTH FLOW AND REFLOW SOLDERING APPLICABLE
For capacitance values > 33000µF, add the value of: 3 CV (µa) max. after 5 minutes; C = Capacitance in µf, V = WV ~ k 10k
T-UP Series 85 C, 3000 hours 4 or 5 terminal mounting provides stability and keyed polarity Extended CV ratings Can vent construction RoHS Compliant Rated Working Voltage: Operating Temperature: Nominal
tan δ (120 Hz/+20 C) Add 0.02 per 1000 µf for products of 1000 µf or more. F±0.5 L<16 :L±1.5 L>20 :L±2.0
Radial Lead Type Series: FK Type: A Features Low impedance (10 % to 30 % less than FC Se ries) Miniaturization (30 % to 40 % less than FC Series) Endurance : 3000 h to 5000 h at +105 C RoHS directive compliant
-40 to C 6.3 to 50 V.DC 22 to 6800 µ F ±20 % (120Hz/+20 C) I < 0.01 CV (µa) after 2 minutes application of rated working voltage at +20 C
Radial Type Series: FM Type :A n Features Low impedance(40 to 70% less than FC Series) Endurance : 2000 to 7000 hours at +105 C Country of Origin Japan Malaysia China n s Category temp. range Rated W.V.
Anti-Surge Thick Film Chip Resistors
FEATURES EXCELLENT ANTI-SURGE CHARACTERISTICS AEC-Q200 QUALIFIED RATED POWER UPGRADE IN SMALLER PACKAGE SIZE MEETS +85 C/85%RH TEST 000 HOURS MEETS CLIMATE CATEGORY (IEC 60068): 55/55/56 AVAILABLE IN ±
Multilayer Ceramic Chip Capacitors
RoHS Compliant FEATURES Includes all homogeneous materials STANDARD EIA 0805 & 1206 PACKAGING *See Part Number System for Details EACH COMPONENT CONTAINS 4 ISOLATED CERAMIC CAPACITORS AVAILABLE IN A WIDE
Type SLP 105 C Snap-In Aluminum Electrolytic Best Value 105 C Snap-In Type
Type SLP is the best value package snap-in series for 05 ºC, 3000 h operation. This series is the most cost-effective choice for DC filtering and power supply applications where high temperature, long
LPH Large Capacitance Aluminum Electrolytic Capacitors
Series LPH 105 C, Miniaturized, High-Reliability, High-Ripple Capacitors ULTRAMINI, HIGH RELIABLILITY TYPE Smaller-sized and higher-ripple than L3J. Guaranteed for 2000 hours at 105 C. Outline Drawing
Anti-Surge Thick Film Chip Resistors
FEATURES EXCELLENT ANTI-SURGE & ANTI-SULFUR CHARACTERISTICS AEC-Q200 QUALIFIED RATED POWER UPGRADE IN SMALLER PACKAGE SIZE AVAILABLE IN ± TOLERANCE BOTH FLOW SOLDER AND REFLOW SOLDERING ARE APPLICABLE
Summary of Specifications
Series Snap Mount Large High CV High Ripple RoHS Compliant 85 C Maximum Temperature The series capacitors are the standard 85 C, large capacitance, snap-in capacitors from United Chemi-Con. The load life
CONDUCTIVE POLYMER ALUMINUM SOLID CAPACITORS
CONDUCTIVE POLYMER ALUMINUM SOLID CAPACITORS FEH Series Radial Lead, 125 C Low CUSTOMER APPROVAL : *Contents in this sheet are subject to change without prior notice. 1. Features Ultra Low & high ripple
Contents CORNELL DUBILIER
Contents Products Listed by Type Designation........................................................ Chip and SMT Selector Guide................................................................... 1.001
Snap-in Type Aluminium Electrolytic Capacitors
Endurance:105 3000 hours Recommended Applications : Smoothing circuit, TV/Monitor,Adapter, SMPS Corresponding product to RoHS Long Life LG SPECIFICATIONS Item Category Temperature Range Range Rated acitance
Automotive Grade Thin Film Chip Resistors
FEATURES PRECISE TOLERANCE AND TEMPERATURE COEFFICIENT EIA STANDARD CASE SIZES (0402 ~ 2512) AEC-Q200 QUALIFIED FOR AUTOMOTIVE APPLICATIONS LOW NOISE, THIN FILM (NiCr) CONSTRUCTION TEMPERATURE RANGE -55
FEATURES. SMD Style. Reflow soldering. Lead (Pb)-free APPLICATIONS. U R (V) x 5.8
ECV Aluminum Capacitors FEATURES Polarized aluminum electrolytic capacitors SMD Style Miniature dimension Pb-free Available RoHS* COMPLIANT Extended temperature range: 105 C QUICK REFERENCE DATA DESCRIPTION
Size code Rated W.V. Cap. change. 4 W.V to 50 W.V. 6.3 W.V > 10 W.V 1000 hours ±20 % < 200 % initial specifi ed value
Surface Mount Type Series: S Type: V Features Endurance: 85 C 2000 h Vibration-proof product is available upon request. (φ8 mm and larger) RoHS directive compliant s Category Temp. Range 40 C to +85 C
Multilayer Acrylic Polymer Film Capacitors
FEATURES HIGH CAPACITANCE (UP TO 22μF) WIDE VOLTAGE & TEMPERATURE RANGE (16 ~ 100V, -55 C ~ +125 C or ±105 C) UPGRADE PERFORMANCE VS. MLCC's STABLE OVER FREQUENCY, TEMPERATURE & VOLTAGE NO PIEZO ELECTRIC
Snap-in Type Aluminium Electrolytic Capacitors
Endurance: 85 2000hours Recommended Applications : Applying to switching power supply and other industry/ commercial field Corresponding product to RoHS SPECIFICATIONS Item Category Temperature Range -40~+85
SMM SERIES Engineering Bulletin Mar 07
Series SERIES Snap Mount Downsize High Long Life RoHS Compliant 85 C Maximum Temperature The series is a high voltage, long life snap-in capacitor series that offers downsized versions of the SMH series.
Low ESR and High Frequency Radial Electrolytic Capacitor. TZE Series. Features. Applications. Dimensions (in mm)
Low ESR and High Frequency Radial Electrolytic Capacitor Low ESR and High Frequency Radial Electrolytic Capacitor Features Radial leads, cylindrical aluminum case Low impedance and high frequency High
KMG Series. Miniature General Purpose Solvent Proof 105 C Maximum Temperature
Miniature General Purpose Solvent Proof 5 C Temperature The series capacitors are designed for general purpose use with an operating temperature range for most of these capacitors from 55 C to 5 C. The
NPI Power Inductors. NPI W Series
FETURES HIGH URRENT, SMLL SIZE (UP TO 8.6 MPS) SURFE MOUNTLE ONSTRUTION HIGH INUTNE (UP TO 1000µH) TPE N REELE FOR UTOMTI INSERTION FOR USE IN / ONVERTERS HRTERISTIS ase Size NPI16W NPI31W NPI34W NPI52W
Polyester (PET) film capacitor for surface mounting. Encapsulation in self-extinguishing material meeting the requirements of UL 94V-0.
MMC Metallized polyester (PET) SMD According to IEC 6384-19 RoHS Compliant typical applications Construction.5 H B Bypassing, signal coupling. General purpose for highest reliability. Technical data Polyester
STANDARD CASE DIMENSIONS: millimeters (inches) W 1 dimension applies to the termination width for A dimensional area only.
L W FEATURES Non-burn safe technology Reliability level: 0.5%/1000 hours at 85ºC 13 case sizes available, standard and low profile Environmentally friendly, RoHS Compliant CV range: 2.2-1000μF / 1.8-10V
SWITCH-MODE CERAMIC CAPACITORS
Switch-Mode ceramic capacitors feature large capacitance values and exhibit low ESR (equivalent series resistance) and low ESL (equivalent series inductance) making them well suited for high power and
FEATURES Compliant to the RoHS2 directive 2011/65/EU For high frequency SMD Conformal Small and high CV. CASE DIMENSIONS: millimeters (inches)
FEATURES Compliant to the RoHS2 directive 2011/65/EU For high frequency SMD Conformal Small and high CV APPLICATIONS Smartphone Tablet PC Wireless module e-book LEAD-FREE COMPATI- BLE COMPONENT Resin Solder
Reliability testing of solid and liquid type aluminum electrolytic capacitor after long storage
February 4, 2009 SUB: Component testing after Long Period on Shelf Reliability testing of solid and liquid type aluminum electrolytic capacitor after long storage The following pages show the reliability
TMJ Tantalum SMD S1gma TM Series Capacitors
The AVX S1gma TM series is offering a next generation of statistical screening and process control enhancement of tantalum capacitors for professional applications with improved reliability and extremely
DATA SHEET. 152 RMH Aluminum electrolytic capacitors Radial Miniature, High voltage. BCcomponents
DATA SHEET Supersedes data of 18th January 2000 File under BCcomponents, BC01 2000 Apr 07 FEATURES Polarized aluminum electrolytic capacitors, non-solid electrolyte Radial leads, cylindrical aluminum case,
FEATURES Compliant to the RoHS2 directive 2011/65/EU For high frequency SMD Conformal Small and high CV. CASE DIMENSIONS: millimeters (inches)
FEATURES Compliant to the RoHS2 directive 2011/65/EU For high frequency SMD Conformal Small and high CV APPLICATIONS Smartphone Tablet PC Wireless module e-book LEAD-FREE COMPATI- BLE COMPONENT Resin Solder
Summary of Specifications
Miniature General Purpose Solvent Proof Large and Small 85 C Temperature Actual Size The series capacitors are a miniaturized version of the SME series. These capacitors are designed for a load life of,000
Rated voltage Capacitance Cap. Tol. Suffix Suffix. Crimped taping. Ammo 3 E C Q P R Z. Rated voltage Capacitance 7.5 mm.
Polypropylene Film Capacitor Type: ECQP(Z) Non-inductive construction using Polypropylene film with epoxy resin coating Features Excellent temperature and frequency characteristics Excellent long term
*See Part Number System for Details SPECIFICATIONS. Case Dimensions Type Case Size P 2 NFCC04
FETURES RECTNGULR PCKGE ITH METL STRIP FUSE ELEMENT EI SIZES 42, 63, 85 ND 126 CURRENT RTINGS FROM.2 ~ 5. MPS SFETY STNDRD PPROVL (UL and c-ul File Number E32168) Pb-FREE COMPTILE ITH FLO ND REFLO SOLDERING
ESC Aluminum Electrolytic Capacitors
H Description S Capacitors for high frequency applications. H Applications S Computers switching regulator mother board output. H Features S Case with D 6.0 mm has the safety vent at the bottom. H Diagram
6.3 W.V < D(06.3) Miniature > 10 W.V 1000 hours ±20 %
Surface Mount Type Series: S Type: V Features Endurance: 85 C 2000 h Vibration-proof product is available upon request. (08 mm and larger) AEC-Q200 qualifi ed RoHS directive compliant s Category Temp.
PTC Thermistor for Automotive:TPM-C Series
Features 1. Qualification based on AEC-Q200 Rev-C 2. RoHS & Halogen-free compliant 3. EIA size 0603,0805 4. Fast and reliable response Recommended Applications 1. Automotive electronics Part Number Code
LARGE CAPACITANCE ALUMINUM ELECTROLYTIC CAPACITORS. (at 20 after 5 minutes) Dissipation Factor (tanδ) 420 & 450V 0.20
from KMQ series Endurance with ripple : 2,000 to 3,000 hours at 105 Non solvent resistant type RoHS Compliant LXS P246 KMS P225 Downsized LXQ P249 KMM KMQ P215 SPECIFICATIONS Items Category Temperature
Japan Malaysia China. Frequency(Hz) k 10k 100k 1.0 to φ10. ( 6.3mm dia) Vent P±0.5
Radial Lead Type Series: FC Type :A Features Endurance : 5 C 00 h to 5000 h Low impedance Japan Malaysia China Specifications Category Temp. Range Rated W.V. Range Nominal Cap. Range Capacitance Tolerance
APPLICATIONS Smart phone, Tablets, Notebook, LCD TV, Power supplies. P (0.081) 1.35 (0.050) 1.50 (0.059) max
FEATURES Conductive polymer electrode Benign failure mode under recommended use conditions Lower 3x reflow 260 C compatible CV range: 0.47-470μF / 2.5-125V 18 case sizes available APPLICATIONS Smart phone,
Metal Film MELF Resistors
FEATURES SURFACE MOUNT IN SIZES 0102 (0805), 0204 (1406) AND 0207 (2410) AVAILABLE IN PRECISION TOLERANCE AND TC (TO ±0.1% TOL. AND ±10PPM TC) ALL SIZES ARE AVAILABLE IN TAPE/REEL FOR AUTOMATIC MOUNTING
Input Voltage Range ±10% Output Voltage Accuracy Line Voltage Regulation RSS, RSS8, RSD, RSD10 1.2%/1% of Vin typ.
END OF LIFE Dec.11 Features Unregulated Converters Selection Guide RoHS 5/6 Conform 1kVDC or3kvdc Isolation Options H version Approved for Medical Applications Suitable for Fully Automated Assembly Optional
Aluminum Electrolytic Capacitor JNK
FEATES Extended Lifetime at High ripple current High Professional Switch Mode Power Supplies Frequency Converters SPECIFICATIONS Items Performance Characteristics Operating Temperature Range ( ) -40 ~
Conductive Polymer Aluminum Capacitors SMD (Chip), Low Impedance
Conductive Polymer Aluminum Capacitors SMD (Chip), Low Impedance FEATURES Useful life: up to 2000 h at 105 C Very low ESR and high ripple current High voltages up to 100 V AEC-Q200 qualified products on
Rated DC Voltage 004 = 4V 006 = 6.3V 010 = 10V 016 = 16V 020 = 20V 025 = 25V 035 = 35V 050 = 50V
FEATURES Improved reliability 2x standard reduced by 25% to 0.0075 CV Robust against higher thermo-mechanical stresses during assembly process CV range: 0.10-680μF / 4-50V 6 case sizes available 130 low
PTC Thermistor for Automotive:TPM-C Series
SMD PTC Thermistor for Features 1. Qualification based on AEC-Q200 Rev-C 2. RoHS & Halogen-free compliant 3. EIA size 0603,0805 4. Fast and reliable response Recommended Applications 1. Automotive electronics
W.V. (V) tan δ For capacitance value > 1000 µf, add 0.02 per every 1000 µf.
Radial Lead Type Series: FC Type: A Features Endurance : 105 C h to 5000 h Low impedance RoHS directive compliant Specifi cations Category Temp. Range 55 C to +105 C Rated Range 6.3 V.DC to 100 V.DC Nominal
Country of Origin. Standard. -40 to + 85 C 6.3 to 100 V.DC 0.1 to µ F ±20 % (120Hz/+20 C) Please see the attached standard products list
= Radial Lead Type M Series: Type : n Features A Endurance:85 C 2000 h Smaller than series SU RoHS directive compliant Standard Country of Origin Japan Malaysia China n Specifications Category temp.range
SOLID TANTALUM CHIP CAPACITORS T510 SERIES High Capacitance-Low ESR
SOLID TANTALUM CHIP CAPACITORS T510 SERIES High Capacitance-Low Ultra Low < 30 mω New E/7260 Case with < 18 mω Up to 5 Amps ripple current RoHS Compliant & Leadfree Termination (see www. kemet.com for
EP Series Sealed Tiny Pushbutton Switches
Features/Benefits Sealed against solder & cleaning processes Thru-hole and surface mount models Snap-fitting actuator accepts standard caps Tape & reel packaging available RoHS compliant models available
S J
1. Part Number Identification SPECIFICATION Brightek (Europe) Limited S01-2220 - 240 250 J Series Name Inner Code Size 1206~3220 250 250 = 25 10 0 V=25J 1R5 1R5 = 1.5J Breakdown Voltage 240 = 24 10 0 V=24V
Aluminum Electrolytic Capacitors (Radial Lead Type)
Radial ead Type Series : FC Type : A Features : 105 C h to 5000 h ow impedance RoHS compliant Specifications Category temperature range 55 C to +105 C Rated voltage range 6.3 V.DC to 100 V.DC Capacitance
Radial Aluminium Electrolytic Capacitors 105 C
Radial Aluminium Electrolytic Capacitors 105 C Standard, miniaturized, Endurance 1.000h to 2.500h at 105 C Rated voltage range: 6,3V to 100V, Rated capacitance range: 0,47µF to 12.000µF range: Ø 5,5 x
ECE-A1HKA010 ECE-A1HKA010B ECE-A1HKA010I ECE-A1HKS010 ECE-A1HKS010B ECE-A1HKS010I ECE-A1HKSR47 ECE-A1HKSR47B ECE-A1HKSR47I EEA-GA1H1R0 EEA-GA1H1R0B
ECE-A1HKA0 ECE-A1HKA0B ECE-A1HKA0I ECE-A1HKS0 ECE-A1HKS0B ECE-A1HKS0I ECE-A1HKSR47 ECE-A1HKSR47B ECE-A1HKSR47I EEA-GA1H1R0 EEA-GA1H1R0B EEA-GA1H1R0H EEA-GA1HR68 EEA-GA1HR68B EEA-GA1HR68H EEE-1HARAR EEE-1HARAR
FEATURES Compliant to the RoHS2 directive 2011/65/EU SMD J-lead Low profile case sizes
FEATURES Compliant to the RoHS2 directive 2011/65/EU SMD J-lead Low profile case sizes APPLICATIONS Handheld electronics USB accessories LEAD-FREE COMPATI- BLE COMPONENT CASE DIMENSIONS: millimeters (inches)
Performance Characteristics -40 to +85 (160Vdc~450Vdc) -25 to +85 (500Vdc~630Vdc) 160 to 630 V DC Working Voltage(VDC) 160~ ~550
Standard capacitors Applications Frequency converters Uninterruptible power supplies All-welded construction ensures reliable electrical contact Self-extinguishing electrolyte RoHS-compatible Specifications
Rated DC Voltage 004 = 4V 006 = 6.3V 010 = 10V 016 = 16V 020 = 20V 025 = 25V 035 = 35V 050 = 50V
FEATURES Improved reliability 2x standard DCL reduced by 25% to 0.0075 CV Robust against higher thermo-mechanical stresses during assembly process CV range: 0.10-680μF / 4-50V 6 case sizes available 130
Molded Chip Wirewound Inductors
FEATURES EIA SIZES A (1210), B (1812), C (1008) AND D (0805) EXCELLENT HIGH Q AND HIGH CHARACTERISTICS BOTH FLOW AND REFLOW SOLDERING APPLICABLE HIGH INDUCTANCE AVAILABLE IN SMALL SIZE EMBOSSED PLASTIC
ALS30. ALS31 Stud Mounting
25 This range offers high CV per unit volume coupled with high ripple currents and long life performance. They are also capable of handling high peak voltages and currents. Capacitance range... 68µF to
ALS40. ALS41 Stud Mounting
31 This range offers high CV per unit volume coupled with high ripple currents and long life performance at 105 C. They are also capable of handling high peak voltages and currents. Capacitance range...
Resin-Coated, Radial-Leaded Solid Tantalum Capacitors
FEATURES RoHS Compliant design available Flame retardant encapsulation Very high temperature range Improved humidity class Low leakage current Very high CV product Low failure rate Pb-free Available RoHS*
General Purpose Ceramic Capacitors (C Series)
Features: RoHS Compliant and Halogen Free Capacitance range: 0.1pF to 220uF range: 4V to 100V Terminations: 100% matte Tin (Sn), Palladium (Pd-Ag), Gold (Au) and Lead (Pb) Very low ESR in X7R/X5R (
Radial Type Aluminium Electrolytic Capacitors
SH Radial Type Aluminium Electrolytic acitors Endurance: 105 2000hours SH Recommended Applications :For high quality, reliability application, high CV product High Temperature Corresponding product to
Summary of Specifications
Series Large Can Screw Terminal 85 C General Purpose High Ripple Current Capability Extended Range to 550VDC Dimensions in Inches The series is ideal for inverter applications requiring high ripple current
SOLID TANTALUM CHIP CAPACITORS T496 SERIES Fail-Safe Fused
Built-in fuse protects against damaging short circuit failure mode Precision-molded, laser-marked case Symmetrical, compliant terminations Taped and reeled per EIA 481-1 geometry and footprints equivalent
Aluminum Electrolytic Capacitors: SMD
Aluminum Electrolytic Capacitors: SMD Series/Type: The following products presented in this data sheet are being withdrawn. Ordering Code Substitute Product Date of Withdrawal Deadline Last Orders Last
SFI Electronics Technology
1. Part Number Identification SFI 2220 SA 240 250 J Company Logo Inner Code Size 1206~3220 SA SHA Series 250 250 = 25 10 0 V=25J 1R5 1R5 = 1.5J Breakdown Voltage 240 = 24 10 0 V=24V 151 = 15 10 1 V=150V
PEG C and 105 C
125 C and 105 C 125 C and 105 C Long life > 30 years at 50 C Low ESR Low ESL RoHS Compliant application Basic design Smoothing, coupling/decoupling and energy storage in telecommunication, power supply
FEATURES APPLICATIONS. Audio Systems GPS Seat Controls Dashboard
FEATURES General purpose SMT chip tantalum series 6 case sizes available CV range: 0.22-680μF / 6.3-50V APPLICATIONS Audio Systems GPS Seat Controls Dashboard LEAD-FREE COMPATI- BLE COMPONENT MARKING A,
CB Series Tantalum Capacitors
Series Features: Lead-Free. Specially designed of general purpose. Highly reliable resin dipped type. xcellent frequency and temperature characteristics. Non-flammable epoxy resin. Specifications: Item
Applications MDC K 50 A52 P3 TUBE. Capacitance Tolerance. J = ±5 K = ±10% Other tolerances on request. F 15 3 A A 333 K 050 T
Overview Dual in-line (DIL) metallized polyester (PET) film capacitor for surface mounting. Encapsulation in self-extinguishing material meeting the requirements of UL 94 V 0. Applications Typical applications
FEATURES APPLICATIONS. High power DC/DC general applications MULTIANODE CONSTRUCTION
Tantalum Ultra Low Capacitor FEATURES Multi-anode construction Super low CV range: 10-2200μF / 2.5-50V 5 case sizes available Mirror multi-anode construction used with D, Y case capacitors reduces ESL
handbook, halfpage lower RLL 116
FEATURES Polarized aluminium electrolytic capacitors, non-solid Radial leads, cylindrical aluminium case with pressure relief, insulated with a blue vinyl sleeve Charge and discharge proof Long useful
FEATURES Low ESR series of robust Mn0 2 solid electrolyte capacitors CV range: μF / V 5 case sizes available Power supply applications
Low - Automotive Product Range FEATURES Low series of robust Mn0 2 solid electrolyte capacitors CV range: 0.22-680μF / 6.3-50V 5 case sizes available Power supply applications APPLICATIONS Power Supply
CCDSeries FEATURES ORDERING CODE CCD B 101 K H 7 2 (1) (2) (3) (4) (5) (6) (7) (8) (9) Safety Standard Recognized Ceramic Capacitors
CCDSeries Safety Standard Recognized Ceramic s Configuration FEATURES Complying with IEC60384-14 4 th Edition Class X1Y1 and Class X1Y2 Dielectric Strength: AC2600V (r.m.s) for X1Y2 and AC4000V (r.m.s)
Packaging (1) Package
Features Switching Regulator RoHS / conform (% lead free) High reflow temperature SMD package Adjustable output voltage Short circuit protection, thermal shutdown Remote ON/OFF control very low shutdown
Configuration. Specification: Capacitance Range. Insulation Resistance. Maximum Pulse Rise Time(V/μsec.): Shown As Following Table.
Metallized Polyester Film s (Radial Dipped) Configuration FEATURES Self healing characteristics. Miniature size, light in weight. High stability of temperature vs. Cap. and tanδ. High density thermosetting
PTS645 Series 6 mm Tact Switches
PTS5 Series mm Tact Switches Features/enefits Compact size x mm Variety of actuator lengths Choice of actuation force RoHS compliant and compatible Typical Applications Consumer products Instrumentation
Reference Only. *B: Bulk packing also available. Inductance. Tolerance M:±20% N:±30% 0.150±25% 1.0 * * N:±30% 0.23±25% 0.8 *2 0.
CHIP COIL (CHIP INDUCTORS) LQM21PN GRD REFERENCE SPECIFICATION P.1/9 1. Scope This reference specification applies to LQM21PN_GR series, Chip Coil (Chip Inductors). 2. Part Numbering (ex) LQ M 21 P N 1R
MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS. High frequency,low impedance. Wide Temperature, Long life For Switching power supply,ip-board,adaptor,etc.
S YD286 Series High frequency,low edance 105, 2000 hours Wide Temperature, Long life For Switching power supply,ip-board,adaptor,etc. Specifications: Item Characteristics Rated Voltage Range: 6.3V ~100VDC
Aluminum Capacitors Power High Ripple Current Screw Terminals
101/102 PHR-ST Aluminum Capacitors FEATURES ST STB Fig.1 Component outline Polarized aluminum electrolytic capacitors, non-solid electrolyte Large types, cylindrical aluminum case, insulated with a blue
EP Series Sealed Tiny Pushbutton Switches
Features/Benefits Sealed against solder & cleaning processes Thru-hole and surface mount models Snap-fitting actuator accepts standard caps Tape & reel packaging available RoHS compliant models available
EP Series Sealed Tiny Pushbutton Switches
Sealed Tiny Switches Features/Benefits Sealed against solder & cleaning processes Thru-hole and surface mount models Snap-fitting actuator accepts standard caps Tape & reel packaging available RoHS compliant