Surface Mount Aluminum Electrolytic Capacitors
|
|
|
- Scot Newton
- 5 years ago
- Views:
Transcription
1 FETURES YLINDRIL V-HIP ONSTRUTION FOR SURFE MOUNTING REDUED SIZE VILLE WITH NTI-VIRTION TERMINTIONS (8 & 10mm DIMETER) SUIT FOR HIGH TEMPERTURE REFLOW SOLDERING (UP TO 260 ) 2,000 HOUR LOD +105 DESIGNED FOR UTOMTI MOUNTING ND REFLOW SOLDERING MEETS THE REQUIREMENTS OF E-Q200* *ontact NI for supporting test data HRTERISTIS S lloy ompatible 260 RoHS ompliant includes all homogeneous materials *See Part Number System for Details Rated Voltage Rating 6.3 ~ 50Vdc Rated apacitance Range 10 ~ 2,200μF Operating Temp. Range -55 ~ +105 apacitance Tolerance ±20% (M) Max. Leakage urrent fter V or 3μ whichever is greater W.V. (Vdc) Tan 120Hz/20 S.V. (Vdc) Tan 120Hz/ W.V. (Vdc) Low Temperature Z-25 /Z Stability Impedance 120Hz Z-40 /Z Z-55 /Z apacitance hange Within ±30% of initial measured value Load Life 105 Tan δ Less than ±200% of the specified maximum value ll ase Sizes = 2,000 hours Leakage urrent Less than the specified maximum value STNDRD VLUES ND SE SIZES (mm) ap. Working Voltage (Vdc) ode (µf) x6.1 5x x6.1 4x6.1 5x x6.1 5x x6.1 5x6.1 5x x x6.1 5x6.1 5x x x6.1-5x x x x x x x8 6.3x x x x x8-8x x x8 6.3x8-8x x x x8 6.3x8-8x x x x8-8x x x x PEK REFLOW TERMINTION FINISH & x x x TEMPERTURE ODES PKGING OPTIONS ODES x x Peak Reflow ode Finish & Reel Size ode x x Temperature Sn-i Finish & 13" Reel x N 260 L Sn-i Finish & 15" Reel PRT NUMER SYSTEM NZH 681 M 16V 8x10.5 N L P W Y F RoHS ompliant Optional Wide Terminations* Optional plastic reel (standard material is cardboard). See page 5 & 6 Termination/Packaging ode Reflow Temperature ode Size in mm Working Voltage Tolerance ode M=20% apacitance ode in µf, first 2 digits are significant Third digit is no. of zeros, R indicates decimal for values under 10µF Series *Wide terminations available on 8mm & 10mm diameter parts. See page 4 for details. Optional: Suitable for automotive equipment, sourced to special production and inspection at TS certified production site 1
2 STNDRD VLUES, SE SIZES ND SPEIFITIONS NI Part Number ap. W.V. Dissipaton Factor Max. ESR (W) Max. Ripple urrent (m) Load Life Hours (μf) (Vdc) (Tan δ) +20 /100KHz NZH101M6.3V4X6.1NF ,000 NZH221M6.3V5X6.1NF ,000 NZH331M6.3V6.3X6.1NLF ,000 NZH471M6.3V6.3X8NLF , NZH681M6.3V6.3X8NLF ,000 NZH122M6.3V8X10.5NLF ,000 NZH152M6.3V8X10.5NLF ,000 NZH222M6.3V10X10.5NLF ,000 NZH680M10V4X6.1NF ,000 NZH151M10V5X6.1NF ,000 NZH221M10V6.3X6.1NLF ,000 NZH331M10V6.3X8NLF ,000 NZH471M10V6.3X8NLF ,000 NZH102M10V8X10.5NLF ,000 NZH152M10V10X10.5NLF ,000 NZH470M16V4X6.1NF ,000 NZH680M16V5X6.1NF ,000 NZH101M16V5X6.1NF ,000 NZH151M16V6.3X6.1NLF ,000 NZH221M16V6.3X6.1NLF , NZH331M16V6.3X8NLF ,000 NZH681M16V8X10.5NLF ,000 NZH821M16V8X10.5NF ,000 NZH102M16V10X10.5NLF ,000 NZH122M16V10X10.5NF ,000 NZH220M25V4X6.1NF ,000 NZH330M25V4X6.1NF ,000 NZH470M25V5X6.1NF ,000 NZH680M25V5X6.1NF ,000 NZH101M25V6.3X6.1NLF ,000 NZH151M25V6.3X8NLF ,000 NZH221M25V6.3X8NLF ,000 NZH471M25V8X10.5NLF ,000 NZH561M25V8X10.5NF ,000 NZH821M25V10X10.5NLF ,000 NZH102M25V10X10.5NF ,000 NZH220M35V4X6.1NF ,000 NZH330M35V5X6.1NF ,000 NZH470M35V5X6.1NF ,000 NZH680M35V6.3X6.1NLF ,000 NZH101M35V6.3X6.1NLF , NZH151M35V6.3X8NLF ,000 NZH331M35V8X10.5NLF ,000 NZH391M35V8X10.5NF ,000 NZH561M35V10X10.5NLF ,000 NZH681M35V10X10.5NF ,000 NZH100M50V4X6.1NF ,000 NZH100M50V5X6.1NF ,000 NZH220M50V5X6.1NF ,000 NZH470M50V6.3X6.1NF ,000 NZH101M50V6.3X8NF ,000 NZH221M50V8X10.5NF ,000 NZH331M50V10X10.5NF ,000 RIPPLE URRENT FREQUENY ORRETION FTORS Frequency 120Hz 1KHz 10KHz 100KHz~ ll Values
3 OMPONENT DIMENSIONS (mm) ase Size φd±0.5 L max. ±0.2 ±0.2 I±0.3 W P±0.3 4x ~ x ~ x ~ x ~ x10.5* ~ x10.5* ~ *See page 4 wide termination component dimensions. 0.3mm max. Dφ L Note: L dimension does not include termination deflection. Polarity Marking W + - I I P Production ode apacitance t Series Voltage Rating REOMMENDED LND PTTERN DIMENSIONS (mm) ase Size a b c 4x x x3x x x x c b a Temperature - Deg Preheat seconds max. (160 ) Peak Temperature Time bove 200 Time bove 230 Time bove 217 Time (Seconds) Review & ompare Reflow Soldering Heat Limits V-chip SMT luminum Electrolytic apacitors 3
4 WIDE TERMINTION (WT) DIM. (mm) ase Size Dφ ± 0.5 L max., ± 0.2 max. P ref. W R ± 0.2 T ± 0.2 8x (3.1) 0.7 ~ x (4.6) 0.7 ~ Dφ W R R T WT nti-vibration Skirt L P Termination deflection: WT = 0.15mm max. from bottom of support terminals a WT LND PTTERN DIM. (mm) ase Size a b c 8x x c b b Test Method D apacitance Tangent of Loss Leakage urrent W (Wide Terminations) nti-vibration Test Direction: X, Y, Z axis Frequency & Duration: 5 to 2000Hz reciprocation for 20 minutes, 2 hours each direction Peak to Peak mplitude: 5mm Peak cceleration: 30G Sweep Type: Log Within ± 10% of initial value < Specified value < Specified value PREUTIONS Please review the notes on correct use, safety and precautions found at If in doubt or uncertainty, please review your specific application - process details with NI s technical support personnel: tpmg@niccomp.com 4
5 PEK REFLOW TEMPERTURE ND DURTION Number of Diameter Peak Temperature Duration Time > 230 Time > 217 Time > 200 Reflow Passes* 260 Time > 250, 5 sec. 4 ~ 6.3mm φ Time > 250, 10 sec. 30 sec. 40 sec. 70 sec. 260 Time > 250, 5 sec. 1 8 ~ 10mm φ 245 Time > 240, 10 sec. 2 *Second reflow shall be at least one hour after natural cool to room temperature. RESISTNE TO SOLDERING HET fter reflow soldering the capacitor shall be stablized at room temperature prior to measuring. Resistance to apacitance hange Within ±10% of initial measured value Soldering Heat Tan d Less than specified maximum value Leakage urrent Less than specified maximum value ppearance No significant change can be observed RRIER TPE DIMENSIONS ase Size ± / -0.2 ±0.3 D ±0.1 P ±0.1 T ±0.2 t ±0.1 4x / x x x x x Leader and trailer will have a minimum of 10 empty pockets and 20cm of extended cover tape. 2. maximum of 3 connections (splices) per reel φ+0.1/ t D suffix 330mm (13") RDORD REEL L suffix 380mm (15") RDORD REEL (See page 6 for plastic reel dimensions) ase Size W ±1.0 Reel Quantity TR 13" (330mm) TR 15" (380mm) 4x ,200-5x x x x10.5* x10.5* *See Standard Values tables for standard reel size. ontact NI regarding availability of optional reel size/quantity. P Feeding T 3.0 ± ±0.5 21± ± Min. 330mm or 380mm W 5
6 Optional V-hip 13" (330mm) Plastic Reels (P suffix) Dimensions (mm) ase Size Tape Width W1 W2 4x6.1, 5x ~ ~ x6.1, 6.3x ~ ~ x10.5, 10x ~ ~ 32.0 ase Size Tape Width D E 4x6.1, 5x f330 ±2.0 f50~105 f13 f x6.1, 6.3x ±0.5 ±1.0 ±0.5 8x10.5, 10x W1 W2 olor lack or lue E D Optional V-hip 15" (380mm) Plastic Reels (LP suffix) Dimensions (mm) ase Size Tape Width W1 W2 8x10.5, 10x ~ ~ 32.0 ase Size Tape Width D E f380 f13 f x10.5, 10x f80~105 ±2 ±0.5 ±1.0 ±0.5 W1 W2 E olor lack or lue D ase Size Reel Quantity 13" (330mm) 15" (380mm) 4x6.1 1,200-5x x x x x
Surface Mount Aluminum Electrolytic Capacitors
FETURES YLINRIL V-HIP ONSTRUTION FOR SURFE MOUNTING SUIT FOR HIGH TEMPERTURE REFLOW SOLERING (UP TO 260 ) 2,000 HOUR LO LIFE @ +85 ) ESIGNE FOR UTOMTI MOUNTING N REFLOW SOLERING HRTERISTIS Rated Voltage
Surface Mount Aluminum Electrolytic Capacitors
FETURES YLINRIL V-HIP ONSTRUTION LONG LIFE (7,000 ~ 10,000 HOURS) IE TEMPERTURE RNGE (-25 ~ +105 ) ESIGNE FOR REFLO SOLERING RoHS ompliant includes all homogeneous materials *See Part Number System for
Surface Mount Aluminum Electrolytic Capacitors
FEATURES YLINDRIAL V-HIP ONSTRUTION FOR SURFAE MOUNTING AVAILALE WITH ANTI-VIRATION WIDE TERMINATIONS VERY LOW IMPEDANE & HIGH RIPPLE URRENT AT 100KHz EXTENDED LOAD LIFE (2,000 ~ 5,000 HOURS @ +105 ) SUITALE
Surface Mount Aluminum Electrolytic Capacitors NACZF Series
FETURES YLINRIL LELESS TYPE FOR SURFE MOUNTING HIGH PITNE VLUES (UP TO 6800µF) LO IMPENE/HIGH RIPPLE URRENT T 100KHz 12.5mm x 17mm ~ 18mm x 22mm SE SIZES IE TERMINTION STYLE FOR HIGH VIRTION.PPLITIONS
Surface Mount Aluminum Electrolytic Capacitors
CYLINDRICL VCHIP CONSTRUCTION FOR SURFCE MOUNTING VERY LOW IMPEDNCE WIDE TEMPERTURE RNGE (55 +5 O C) REDUCED SIZE DESIGNED FOR UTOMTIC MOUNTING ND REFLOW SOLDERING MEETS THE REQUIREMENTS OF ECQ200* *Contact
Surface Mount Aluminum Electrolytic Capacitors
FEATURES CYLINDRICAL V-CHIP CONSTRUCTION FOR SURFACE MOUNTING VERY LOW IMPEDANCE & HIGH RIPPLE CURRENT AT 100KHz SUITABLE FOR DC-DC CONVERTER, DC-AC INVERTER, ETC. NEW EXPANDED CV RANGE, UP TO 6800μF NEW
Surface Mount Aluminum Electrolytic Capacitors NACEW Series
FEATURES CYLINDRICAL V-CHIP CONSTRUCTION WIDE TEMPERATURE -55 ~ +105 O C DESIGNED FOR REFLOW SOLDERING MEETS THE REQUIREMENTS OF AEC-Q200* *Contact NIC for supporting test data CHARACTERISTICS Rated Voltage
Surface Mount Aluminum Electrolytic Capacitors
FEATURES CYLINDRICAL V-CHIP CONSTRUCTION FOR SURFACE MOUNTING AVAILALE ITH ANTI-VIRATION IDE TERMINATIONS VERY LO IMPEDANCE & HIGH RIPPLE CURRENT AT 100KHz EXTENDED LOAD LIFE (2,000 ~ 5,000 HOURS @ +105
Surface Mount Aluminum Electrolytic Capacitors
FEATURES CYLINDRICAL V-CHIP CONSTRUCTION LOW COST, GENERAL PURPOSE, 2000 HOURS AT 85 O C NEW EXPANDED CV RANGE (up to 6800µF) ANTI-SOLVENT (2 MINUTES) DESIGNED FOR AUTOMATIC MOUNTING AND REFLOW SOLDERING
Surface Mount Aluminum Electrolytic Capacitors
FEATURES CYLINDRICAL V-CHIP CONSTRUCTION LOW COST, GENERAL PURPOSE, 2000 HOURS AT 85 O C NEW EXPANDED CV RANGE (up to 6800μF) ANTI-SOLVENT (2 MINUTES) DESIGNED FOR AUTOMATIC MOUNTING AND REFLOW SOLDERING
NPI Power Inductors. NPI W Series
FETURES HIGH URRENT, SMLL SIZE (UP TO 8.6 MPS) SURFE MOUNTLE ONSTRUTION HIGH INUTNE (UP TO 1000µH) TPE N REELE FOR UTOMTI INSERTION FOR USE IN / ONVERTERS HRTERISTIS ase Size NPI16W NPI31W NPI34W NPI52W
Miniature Aluminum Electrolytic Ca pac i tors
ULTRA LOW IMPEDANCE, RADIAL LEADS, POLARIZED, ALUMINUM ELEC TRO LYT IC FEATURES VERY LOW IMPEDANCE LONG LIFE AT 105 C (1000 ~ 5000 hrs.) HIGH STABILITY AT LOW TEMPERATURE IDEALLY FOR SWITCHING POWER SUPPLIES
Technical Support: Voltage Capacitance Alternate Suggested Replacement Part Numbers NPC101M2D5ZATRF 2VDC 100uF
www.niccomp.com/pcn Technical Support: tpmg@niccomp.com October 28 th 2016 SUB: EOL End of Life Notification Products impacted by this notice: NPC Series SMT Solid Polymer Aluminum Electrolytic Capacitors
Type AHA SMT Aluminum Electrolytic Capacitors -55 C to +105 C - Long Life
Long Life Filtering, Bypassing, Power Supply Decoupling Capacitors deliver twice the life of many SMT aluminum capacitor types, and they handle high levels of ripple current. The AHA can handle the ripple
Large Can Aluminum Electrolytic Capacitors
FEATURES LONG LIFE AT +105 C (2,000 ~ 3,000 HOURS) HIGH RIPPLE CURRENT HIGH VOLTAGE (UP TO 500VDC) SUITABLE FOR SWITCHING POWER SUPPLIES SPECIFICATIONS *See System for Details Operating Temperature Range
Type AVS SMT Aluminum Electrolytic Capacitors - General Purpose, 85 C
General Purpose Filtering, Bypassing, Power Supply Decoupling Specifications Operating Temperature: Rated voltage: Capacitance: D.F. (@ 20 C): Capacitance Tolerance: Leakage Current: Ripple Current Multipliers:
tan δ (120 Hz/+20 C) Add 0.02 per 1000 µf for products of 1000 µf or more. F±0.5 L<16 :L±1.5 L>20 :L±2.0
Radial Lead Type Series: FK Type: A Features Low impedance (10 % to 30 % less than FC Se ries) Miniaturization (30 % to 40 % less than FC Series) Endurance : 3000 h to 5000 h at +105 C RoHS directive compliant
Tantalum Chip Capacitors
FEATURES EXPANDED VALUE RANGE & REDUCED CASE SIZES MOLDED CONSTRUCTION FOR HIGH SOLDERING HEAT RESISTANCE ELEVEN CASE SIZES (J, P, A2, A, B2, B, C2, C, V, D AND E) BOTH FLOW AND REFLOW SOLDERING APPLICABLE
55 C to +105 C 6.3, 10, 16, 25, 35, 50, 63, 80 & 100 Vdc. Shelf Test: C. 0.3 mm Max. A
Type AFK 55 C to 5 C SMT Aluminum Electrolytic Capacitors - Lowest E.S.R., 5 C Low Impedance and Long-Life for Filtering, Bypassing and Power Supply Decoupling Specifications Life Test: Operating Temperature:
-40 to C 6.3 to 50 V.DC 22 to 6800 µ F ±20 % (120Hz/+20 C) I < 0.01 CV (µa) after 2 minutes application of rated working voltage at +20 C
Radial Type Series: FM Type :A n Features Low impedance(40 to 70% less than FC Series) Endurance : 2000 to 7000 hours at +105 C Country of Origin Japan Malaysia China n s Category temp. range Rated W.V.
High Power Thin Film Chip Resistors
FETURES IMPROVE POWER RTING (HIGHER THN NTR SERIES) PRECISE TOLERNCE N TEMPERTURE COEFFICIENT EI STNR CSE SIZES (0603 ~ 2512) LOW NOISE, THIN FILM (NiCr) CONSTRUCTION REFLOW SOLERLE (Pb FREE TERMINTION
Anti-Surge Thick Film Chip Resistors
FEATURES EXCELLENT ANTI-SURGE CHARACTERISTICS AEC-Q200 QUALIFIED RATED POWER UPGRADE IN SMALLER PACKAGE SIZE MEETS +85 C/85%RH TEST 000 HOURS MEETS CLIMATE CATEGORY (IEC 60068): 55/55/56 AVAILABLE IN ±
Multilayer Acrylic Polymer Film Capacitors
FEATURES HIGH CAPACITANCE (UP TO 22μF) WIDE VOLTAGE & TEMPERATURE RANGE (16 ~ 100V, -55 C ~ +125 C or ±105 C) UPGRADE PERFORMANCE VS. MLCC's STABLE OVER FREQUENCY, TEMPERATURE & VOLTAGE NO PIEZO ELECTRIC
Anti-Surge Thick Film Chip Resistors
FEATURES EXCELLENT ANTI-SURGE & ANTI-SULFUR CHARACTERISTICS AEC-Q200 QUALIFIED RATED POWER UPGRADE IN SMALLER PACKAGE SIZE AVAILABLE IN ± TOLERANCE BOTH FLOW SOLDER AND REFLOW SOLDERING ARE APPLICABLE
GENERAL DESCRIPTION. AVX Capacitor Array - W2A41A***K S21 Magnitude Frequency (GHz)
apacitor rray apacitor rray (I) NFIS OF USING IOR RRYS V capacitor arrays offer designers the opportunity to lower placement costs, increase assembly line output through lower component count per board
FEATURES. SMD Style. Reflow soldering. Lead (Pb)-free APPLICATIONS. U R (V) x 5.8
ECV Aluminum Capacitors FEATURES Polarized aluminum electrolytic capacitors SMD Style Miniature dimension Pb-free Available RoHS* COMPLIANT Extended temperature range: 105 C QUICK REFERENCE DATA DESCRIPTION
Type SLP 105 C Snap-In Aluminum Electrolytic Best Value 105 C Snap-In Type
Type SLP is the best value package snap-in series for 05 ºC, 3000 h operation. This series is the most cost-effective choice for DC filtering and power supply applications where high temperature, long
CONDUCTIVE POLYMER ALUMINUM SOLID CAPACITORS
CONDUCTIVE POLYMER ALUMINUM SOLID CAPACITORS FEH Series Radial Lead, 125 C Low CUSTOMER APPROVAL : *Contents in this sheet are subject to change without prior notice. 1. Features Ultra Low & high ripple
HIGH VOLTAGE THICK FILM CHIP FIXED RESISTOR
HIGH VOLTGE THIK FILM HIP FIXED RESISTOR 3000V Max Operating voltage 3000V Stable electrical capability, high reliability Superior mechanical and frequency characteristics ROHS ompliant with RoHS directive
CB Series Tantalum Capacitors
Series Features: Lead-Free. Specially designed of general purpose. Highly reliable resin dipped type. xcellent frequency and temperature characteristics. Non-flammable epoxy resin. Specifications: Item
*See Part Number System for Details SPECIFICATIONS. Case Dimensions Type Case Size P 2 NFCC04
FETURES RECTNGULR PCKGE ITH METL STRIP FUSE ELEMENT EI SIZES 42, 63, 85 ND 126 CURRENT RTINGS FROM.2 ~ 5. MPS SFETY STNDRD PPROVL (UL and c-ul File Number E32168) Pb-FREE COMPTILE ITH FLO ND REFLO SOLDERING
16 ~ 250 VDC -40 ~ +105 C 820~250000µF ± 20% For capacitance values > 33000µF, add the value of:
T-HA Series 105 C, 3000 hours Long Life - endurance rating of 3000 hours at 105 C 4 or 5 terminal mounting provides stability and keyed polarity Extended higher CV ratings RoHS Compliant Rated Working
Summary of Specifications
Large an Screw erminals Longer Life U36 Grade High Ripple 350 to 500VD Ratings RoHS ompliant 85 Maximum emperature he series is a longer life version of the industry standard U36D specifically designed
Size code Rated W.V. Cap. change. 4 W.V to 50 W.V. 6.3 W.V > 10 W.V 1000 hours ±20 % < 200 % initial specifi ed value
Surface Mount Type Series: S Type: V Features Endurance: 85 C 2000 h Vibration-proof product is available upon request. (φ8 mm and larger) RoHS directive compliant s Category Temp. Range 40 C to +85 C
Contents CORNELL DUBILIER
Contents Products Listed by Type Designation........................................................ Chip and SMT Selector Guide................................................................... 1.001
LPH Large Capacitance Aluminum Electrolytic Capacitors
Series LPH 105 C, Miniaturized, High-Reliability, High-Ripple Capacitors ULTRAMINI, HIGH RELIABLILITY TYPE Smaller-sized and higher-ripple than L3J. Guaranteed for 2000 hours at 105 C. Outline Drawing
Type AFK, -55 C to 105 C SMT Aluminum Electrolytic Capacitors - Lowest E.S.R., 105 C
hip and SMT apacitors Type AFK, -55 to 05 SMT Aluminum Electrolytic apacitors - Lowest E.S.R., 05 Lowest ESR and Long Life for Filtering, Bypassing, Power Supply Decoupling Specifications Operating Temperature:
Conductive Polymer Aluminum Capacitors SMD (Chip), Low Impedance
Conductive Polymer Aluminum Capacitors SMD (Chip), Low Impedance FEATURES Useful life: up to 2000 h at 105 C Very low ESR and high ripple current High voltages up to 100 V AEC-Q200 qualified products on
For capacitance values > 33000µF, add the value of: 3 CV (µa) max. after 5 minutes; C = Capacitance in µf, V = WV ~ k 10k
T-UP Series 85 C, 3000 hours 4 or 5 terminal mounting provides stability and keyed polarity Extended CV ratings Can vent construction RoHS Compliant Rated Working Voltage: Operating Temperature: Nominal
Low ESR and High Frequency Radial Electrolytic Capacitor. TZE Series. Features. Applications. Dimensions (in mm)
Low ESR and High Frequency Radial Electrolytic Capacitor Low ESR and High Frequency Radial Electrolytic Capacitor Features Radial leads, cylindrical aluminum case Low impedance and high frequency High
Summary of Specifications
Series Snap Mount Large High CV High Ripple RoHS Compliant 85 C Maximum Temperature The series capacitors are the standard 85 C, large capacitance, snap-in capacitors from United Chemi-Con. The load life
CONDUCTIVE POLYMER ALUMINUM SOLID CAPACITOR
CONDUCTIVE POLYMER ALUMINUM SOLID CAPACITOR 1 Application Guidelines 1. Polarity CSCAP is solid aluminum electrolytic capacitors with positive and negative electrodes. Do not reverse the polarity when
Molded Chip Wirewound Inductors
FEATURES EIA SIZES A (1210), B (1812), C (1008) AND D (0805) EXCELLENT HIGH Q AND HIGH CHARACTERISTICS BOTH FLOW AND REFLOW SOLDERING APPLICABLE HIGH INDUCTANCE AVAILABLE IN SMALL SIZE EMBOSSED PLASTIC
Reliability testing of solid and liquid type aluminum electrolytic capacitor after long storage
February 4, 2009 SUB: Component testing after Long Period on Shelf Reliability testing of solid and liquid type aluminum electrolytic capacitor after long storage The following pages show the reliability
PRCP POLYMER RESETTABLE CIRCUIT PROTECTORS FEATURES APPLICATIONS PART NUMBER DESIGNATION P R C P - M S M F / 2 4 X - 2 E- 9 9.
FETURES PPLITIONS PRT NUMER ESIGNTION P R P - M S M F 0 7 5 / 4 X - E- 9 9 Product name Product number Hold current (I hold) Higher voltage option lankstandard 66 volt rated volt rated 4040 volt rated
Multilayer Ceramic Chip Capacitors
RoHS Compliant FEATURES Includes all homogeneous materials STANDARD EIA 0805 & 1206 PACKAGING *See Part Number System for Details EACH COMPONENT CONTAINS 4 ISOLATED CERAMIC CAPACITORS AVAILABLE IN A WIDE
Wirewound Resistors, Industrial Power, Vitreous Coated, Adjustable Tubular
Wirewound Resistors, Industrial Power, Vitreous oated, djustable Tubular FETURES High temperature vitreous coating omplete welded construction Tight tolerance of 5 % for values above 1 Excellent stability
SWITCH-MODE CERAMIC CAPACITORS
Switch-Mode ceramic capacitors feature large capacitance values and exhibit low ESR (equivalent series resistance) and low ESL (equivalent series inductance) making them well suited for high power and
JS Series Sub-Miniature Slide Switches
Su-Miniture Switches Fetures/enefits Positive detent Low profile IR reflow to 60º solder profile Surfce nd thru hole mounting, DPDT, DPT models RoHS complint Typicl pplictions Telecommuniction products
U37L SERIES Engineering Bulletin Mar 2013
EIE Large an crew erminals General Purpose U37 Grade High ipple 350 to 500VD atings oh ompliant 10,000 Hours Lifetime at 85 Up to 175,000 Hours Useful Life he series is a longer life version of the U37
MODULAR TELEPHONE JACKS
dam Technologies, Inc. MODULR TELEPHONE JKS INTRODUTION: dam Tech MTJ series Modular Telephone Jacks are a complete line of P and wire leaded jacks which are UL and S approved and meet all required F rules
W2A (0508) Capacitor Arrays. 4 pcs 0402 Capacitors = 1 pc 0508 Array. 2.1 (0.083) AREA = 3.95mm2 (0.156 in2)
apacitor rray apacitor rray (I) NFI OF UING IOR RRY V capacitor arrays offer designers the opportunity to lower placement costs, increase assembly line output through lower component count per board and
U37F SERIES Engineering Bulletin Mar 2013
EIE Large an crew erminals General Purpose U37 Grade High ipple 350 to 500VD atings oh ompliant 5,000 Hours Lifetime at 85 Up to 150,000 Hours Useful Life he series is a general purpose, screw mount U37
U37X SERIES Engineering Bulletin Mar 2013
EIE Large an crew erminals General Purpose U37 Grade High ipple 350 to 500VD atings oh ompliant 15,000 Hours Lifetime at 85 Up to 175,000 Hours Useful Life he series is the longest life version of the
Reference Only. *B: Bulk packing also available. Inductance. Tolerance M:±20% N:±30% 0.150±25% 1.0 * * N:±30% 0.23±25% 0.8 *2 0.
CHIP COIL (CHIP INDUCTORS) LQM21PN GRD REFERENCE SPECIFICATION P.1/9 1. Scope This reference specification applies to LQM21PN_GR series, Chip Coil (Chip Inductors). 2. Part Numbering (ex) LQ M 21 P N 1R
Automotive Grade Thin Film Chip Resistors
FEATURES PRECISE TOLERANCE AND TEMPERATURE COEFFICIENT EIA STANDARD CASE SIZES (0402 ~ 2512) AEC-Q200 QUALIFIED FOR AUTOMOTIVE APPLICATIONS LOW NOISE, THIN FILM (NiCr) CONSTRUCTION TEMPERATURE RANGE -55
SMM SERIES Engineering Bulletin Mar 07
Series SERIES Snap Mount Downsize High Long Life RoHS Compliant 85 C Maximum Temperature The series is a high voltage, long life snap-in capacitor series that offers downsized versions of the SMH series.
Reference Only. Inductance Frequency (μh) Tolerance Typ Max (MHz min.) 85 *
P.1/10 CHIP COIL (CHIP INDUCTORS) LQM2HPN G0L REFERENCE SPECIFICATION 1. Scope This reference specification applies to LQM2HPN_G0 series, Chip Coil (Chip Inductors). 2. Part Numbering (ex) LQ M 2H P N
DATA SHEET. 152 RMH Aluminum electrolytic capacitors Radial Miniature, High voltage. BCcomponents
DATA SHEET Supersedes data of 18th January 2000 File under BCcomponents, BC01 2000 Apr 07 FEATURES Polarized aluminum electrolytic capacitors, non-solid electrolyte Radial leads, cylindrical aluminum case,
KMG Series. Miniature General Purpose Solvent Proof 105 C Maximum Temperature
Miniature General Purpose Solvent Proof 5 C Temperature The series capacitors are designed for general purpose use with an operating temperature range for most of these capacitors from 55 C to 5 C. The
PTC Thermistor for Automotive:TPM-C Series
Features 1. Qualification based on AEC-Q200 Rev-C 2. RoHS & Halogen-free compliant 3. EIA size 0603,0805 4. Fast and reliable response Recommended Applications 1. Automotive electronics Part Number Code
Polyester (PET) film capacitor for surface mounting. Encapsulation in self-extinguishing material meeting the requirements of UL 94V-0.
MMC Metallized polyester (PET) SMD According to IEC 6384-19 RoHS Compliant typical applications Construction.5 H B Bypassing, signal coupling. General purpose for highest reliability. Technical data Polyester
SPECIFICATION COMMERCIALLY AVAILABLE. CERAMIC FILTER PART NUMBER: CF RoHS ISSUED / REVISION ENGINEER APPROVED DOCUMENT CHECKED DRAFTSMAN
DIELECTRIC CERAMIC FILTER SPECIFICATION 1 OF 6 SPECIFICATION COMMERCIALLY AVAILABLE CERAMIC FILTER PART NUMBER: CF-22505105 RoHS ISSUED / REVISION ENGINEER APPROVED DOCUMENT CHECKED DRAFTSMAN 7/6/07**
W.V. (V) tan δ For capacitance value > 1000 µf, add 0.02 per every 1000 µf.
Radial Lead Type Series: FC Type: A Features Endurance : 105 C h to 5000 h Low impedance RoHS directive compliant Specifi cations Category Temp. Range 55 C to +105 C Rated Range 6.3 V.DC to 100 V.DC Nominal
Nov 7, 2006 DIELECTRIC CERAMIC FILTER SPECIFICATION 1 OF 9 SPECIFICATION ITEM: DIELECTRIC CERAMIC FILTER PART NUMBER: CF
Nov 7, 2006 DIELECTRIC CERAMIC FILTER SPECIFICATION 1 OF 9 SPECIFICATION ITEM: DIELECTRIC CERAMIC FILTER PART NUMBER: CF-19100328 4/14/06 Added recommended PCB layout and plots. 6/2/06 Added Tape and Reel
DC2-Wire Cylindrical Long-Distance No-Polarity Proximity Switches
D-Wire ylindrical Long-Distance No-Polarity Proximity Switches FL7M Series Rigid structure reduces damage from collision with workpiece. Long sensing distance (M: mm, M: mm, M: 5 mm) D -wire switch with
Snap-in Type Aluminium Electrolytic Capacitors
Endurance: 85 2000hours Recommended Applications : Applying to switching power supply and other industry/ commercial field Corresponding product to RoHS SPECIFICATIONS Item Category Temperature Range -40~+85
Reference Only. 1. Scope This reference specification applies to LQM2MPN_G0L series, Chip Coil (Chip Inductors).
Spec No. JELF243B-22L-1 P1/9 CHIP COIL (CHIP INDUCTORS) LQM2MPN GL REFERENCE SPECIFICATION 1. Scope This reference specification applies to LQM2MPN_GL series, Chip Coil (Chip Inductors). 2. Part Numbering
Metal Oxide Varistor:TVM-B Series
Features 1. RoHS compliant 2. High surge suppress capability 3. EIA size 0402 ~ 2220 4. Operating voltage: 5.5 ~ 85 Vdc 5. Bidirectional and symmetrical V/I characteristics 6. Multilayer ceramic construction
Performance Characteristics -40 to +85 (160Vdc~450Vdc) -25 to +85 (500Vdc~630Vdc) 160 to 630 V DC Working Voltage(VDC) 160~ ~550
Standard capacitors Applications Frequency converters Uninterruptible power supplies All-welded construction ensures reliable electrical contact Self-extinguishing electrolyte RoHS-compatible Specifications
Packaging Information
PKGING ORDERING ODE NTI-STTI PKGE ODE PREFERRED PKGE ODE PKGING DESRIPTION 51, ulk 52, 52T P SM (DO-214) /SMG (DO-215), 12 mm tape, 7" diameter plastic reel 2D P SM5-8 (DO-218), 24 mm tape, 13" diameter
SPECIFICATION COMMERCIALLY AVAILABLE CERAMIC BAND PASS PART NUMBER:CF ISSUED / REVISION ENGINEER APPROVED DOCUMENT CHECKED DRAFTSMAN
FILTER SPECIFICATION 1 OF 6 SPECIFICATION COMMERCIALLY AVAILABLE CERAMIC BAND PASS PART NUMBER:CF-10300024 ISSUED / REVISION ENGINEER APPROVED DOCUMENT CHECKED DRAFTSMAN 6/04/04 ** 5/13/2010 SRJ 5/13/2010
PTC Thermistor for Automotive:TPM-C Series
SMD PTC Thermistor for Features 1. Qualification based on AEC-Q200 Rev-C 2. RoHS & Halogen-free compliant 3. EIA size 0603,0805 4. Fast and reliable response Recommended Applications 1. Automotive electronics
Gecko Connectors. SPECIFICATIONS Gecko. mating PROFiles. Mechanical. Materials. Environmental. Electrical.
onnectors SPEIFITIONS Materials Mouldings: Female ontacts: Male ontacts: Finish: Electrical Glass-filled thermoplastic UL94V-0 opper lloy PT / SMT: Phosphor ronze rimp: rass Gold urrent (individual contacts
SPECIFICATION FOR APPROVAL
FEB 25, 2004 CERAMIC DIPLEX FILTER SPECIFICATION 1 OF 6 SPECIFICATION FOR APPROVAL ITEM: CERAMIC DIPLEX FILTER PART NUMBER: CFD-122715756 ISSUED CHECKED CHECKED CHECKED APPROVED FILTRONETICS Inc FEB 25,
Gecko Connectors Introduction
Gecko ontents Introduction Screw-Lok mm pitch High-Reliability onnectors Specifications Mating Profiles Female P onnectors Female able onnectors Male P onnectors Male able onnectors Latched mm pitch High-Reliability
SPECIFICATION COMMERCIALLY AVAILABLE CERAMIC BAND PASS FILTER PART NUMBER: CF RoHS ISSUED CHECKED CHECKED CHECKED APPROVED.
Page 1 of 6 SPECIFICATION COMMERCIALLY AVAILABLE CERAMIC BAND PASS FILTER PART NUMBER: CF-22500024 RoHS 12/7/09 Added Attenuation and graph 9/1/17 Added Recommended Solder Pattern ISSUED CHECKED CHECKED
CGA Series Automotive Grade Capacitors
CGA Series Automotive Grade Capacitors Type: CGA2 [EIA CC0402] CGA3 [EIA CC0603] CGA4 [EIA CC0805] CGA5 [EIA CC1206] CGA6 [EIA CC1210] Issue date: April 2011 TDK MLCC US Catalog REMINDERS Please read before
Rated voltage Capacitance Cap. Tol. Suffix Suffix. Crimped taping. Ammo 3 E C Q P R Z. Rated voltage Capacitance 7.5 mm.
Polypropylene Film Capacitor Type: ECQP(Z) Non-inductive construction using Polypropylene film with epoxy resin coating Features Excellent temperature and frequency characteristics Excellent long term
9 ORDERING INFORMATION MTJ MTJ SERIES
MODULR JKS Introduction: dam Tech MTJ series Modular Jacks are a complete line of P and wire leaded jacks which are UL and S approved and meet all required F rules and regulations. dam Tech offers a multitude
X-CON CONDUCTIVE POLYMER ALUMINUM SOLID CAPACITORS
X-CON CONDUCTIVE POLYMER ALUMINUM SOLID CAPACITORS 2016-2017 Series Table P.3 Index Contents Index Series Chart P.3 Application Guidelines P.4 Part Number System P.8 Taping Specifications P.9 Lead Forming
DIELECTRIC CERAMIC FILTER SPECIFICATION 1 OF 6 SPECIFICATION COMMERCIALLY AVAILABLE. CERAMIC FILTER PART NUMBER: CF RoHS
DIELECTRIC CERAMIC FILTER SPECIFICATION 1 OF 6 SPECIFICATION COMMERCIALLY AVAILABLE CERAMIC FILTER PART NUMBER: CF-13501505 RoHS ISSUED CHECKED CHECKED CHECKED APPROVED 12/14/09 kn 10/25/12 DS 11/15/12
Oct 25, 2007 DIELECTRIC CERAMIC FILTER SPECIFICATION 1 OF 6 SPECIFICATION COMMERCIALLY AVAILABLE
Oct 25, 2007 DIELECTRIC CERAMIC FILTER SPECIFICATION 1 OF 6 SPECIFICATION COMMERCIALLY AVAILABLE ITEM: DIELECTRIC CERAMIC FILTER PART NUMBER: CF-14200604 ISSUED CHECKED CHECKED CHECKED APPROVED FILTRONETICS
DIELECTRIC CERAMIC FILTER SPECIFICATION 1 OF 6 SPECIFICATION COMMERCIALLY AVAILABLE. CERAMIC FILTER PART NUMBER: CF RoHS
DIELECTRIC CERAMIC FILTER SPECIFICATION 1 OF 6 SPECIFICATION COMMERCIALLY AVAILABLE CERAMIC FILTER PART NUMBER: CF-10000064 RoHS ISSUED / REVISION ENGINEER APPROVED DOCUMENT CHECKED DRAFTSMAN 1/31/11 DS
ESC Aluminum Electrolytic Capacitors
H Description S Capacitors for high frequency applications. H Applications S Computers switching regulator mother board output. H Features S Case with D 6.0 mm has the safety vent at the bottom. H Diagram
SOLID TANTALUM CHIP CAPACITORS T510 SERIES High Capacitance-Low ESR
SOLID TANTALUM CHIP CAPACITORS T510 SERIES High Capacitance-Low Ultra Low < 30 mω New E/7260 Case with < 18 mω Up to 5 Amps ripple current RoHS Compliant & Leadfree Termination (see www. kemet.com for
June 26, 2006 DIELECTRIC CERAMIC DUPLEX FILTER SPECIFICATION 1 OF 6 SPECIFICATION ITEM: DIELECTRIC CERAMIC DUPLEX FILTER PART NUMBER: CFDM
June 26, 2006 DIELECTRIC CERAMIC DUPLEX FILTER SPECIFICATION 1 OF 6 SPECIFICATION ITEM: DIELECTRIC CERAMIC DUPLEX FILTER PART NUMBER: CFDM-0902094710 Application: GSM 900 Duplexer ISSUED CHECKED CHECKED
TMJ Tantalum SMD S1gma TM Series Capacitors
The AVX S1gma TM series is offering a next generation of statistical screening and process control enhancement of tantalum capacitors for professional applications with improved reliability and extremely
2920L Series. POLY-FUSE Resettable PTCs. Surface Mount > 2920L Series. Description
RoHS Description The PTC provides surface mount overcurrent protection for medium voltage ( 60V) applications where resettable protection is desired. Features RoHS compliant, lead-free and halogen-free
C Series Mid Voltage Application
C Series Mid Application Type: C1005 [EIA CC0402] C1608 [EIA CC0603] C2012 [EIA CC0805] C3216 [EIA CC1206] C3225 [EIA CC1210] C4532 [EIA CC1812] C5750 [EIA CC2220] Issue date: April 2011 TDK MLCC US Catalog
POLYFUSE Resettable PTCs Surface Mount > 2920L Series
Surface Mount > Description The PTC provides surface mount overcurrent protection for medium voltage ( 60V) applications where resettable protection is desired. Features Agency Approvals AGENCY AGENCY
Switch EDG/EDS SPST EDG/EDS DPST EDG/EDS SPDT EDG/EDS 3PST EDG/EDS 4PST EDG/EDS DPDT
EDG/EDS SERIES SLIDE TYPE EDG/EDS SPST EDG/EDS DPST EDG/EDS SPDT EDG/EDS PST EDG/EDS 4PST EDG/EDS DPDT FETURES Tactile response is performed directly by larger contact pressure to ensure very stable contact.
handbook, halfpage 059 PLL-SI 200 V, 250 V, 400 V, 450 V Category temperature range 25 to +105 C Endurance test at 105 C
FEATURES Polarized aluminium electrolytic capacitors, non-solid arge types, very small dimensions, cylindrical aluminium case, insulated with a blue sleeve Pressure relief on the top of the aluminium case
SOLID TANTALUM CHIP CAPACITORS T495 SERIES Low ESR, Surge Robust
CATHODE (-) END VIEW W SOLID TANTALUM CHIP CAPACITORS Designed for very low ESR High ripple current capability High surge current capability 100% accelerated steady-state aging 100% Surge Current test
ccessories (sold separately) Name ppearance O.D. Mounting bracket Protective cover Spatter-guarded protective cover For M12 For M18 For M30 For M12 Fo
D3-Wire ylindrical Proximity Switches Model FL7M Extensive lineup includes M8 to M30 sizes, with NPN and PNP output models available for each. ompact size saves space Indicator lamp can be checked even
Summary of Specifications
Miniature General Purpose Solvent Proof Large and Small 85 C Temperature Actual Size The series capacitors are a miniaturized version of the SME series. These capacitors are designed for a load life of,000
Radial Aluminium Electrolytic Capacitors 105 C
Radial Aluminium Electrolytic Capacitors 105 C Standard, miniaturized, Endurance 1.000h to 2.500h at 105 C Rated voltage range: 6,3V to 100V, Rated capacitance range: 0,47µF to 12.000µF range: Ø 5,5 x
LANC245.1W12. DC/DC Converter VDC Input 5.1 VDC Output at 2.4A. Features:
DC/DC Converter 18-36 VDC Input 5.1 VDC Output at 2.4A Features: Applications: Distributed Power Architectures Communications Equipment Computer Equipment Work Stations UL TUV CB CE MARK RoHS Compliant
General Purpose Ceramic Capacitors (C Series)
Features: RoHS Compliant and Halogen Free Capacitance range: 0.1pF to 220uF range: 4V to 100V Terminations: 100% matte Tin (Sn), Palladium (Pd-Ag), Gold (Au) and Lead (Pb) Very low ESR in X7R/X5R (
Wirewound Chip Inductors
EATURES CERAMIC BODY, WIRE WOUND CHIP INDUCTOR SIZES K (0402) and J (0603) RoHS Compliant includes all homogeneous materials HIGH CURRENT AND LOW *See Part Number System for Details RELOW SOLDERING APPLICABLE