Solid-Electrolyte TANTALEX Capacitors, Military MIL-PRF-39003/01 Qualified, Style CSR13
|
|
- Abner Lynch
- 5 years ago
- Views:
Transcription
1 olid-electrolyte TANTALEX apacitors, ilitary IL-F-39003/01 Qualified, tyle 13 FEATUE Hermetically sealed etal cased Axial lead Weibull failure rates,,, Exponential failure rates,,, Tape and reel available per EIA-296 standard TYLE, ILITAY EIFIATION HEET tyle 13, IL-F-39003/1 EFOANE HAATEITI Operating Temperature: -55 to (above 85, voltage derating is required) apacitance ange: μf to 330 μf EITION olid-electrolyte TANTALEX capacitors to military specification IL-F Exponential and Weibull istribution: hermetically sealed, metal cased, axial leaded tubular capacitors manufactured as military style 13. These capacitors are furnished to the requirements of the military specification, including marking, testing and inspection. In accordance with the specification, all capacitors are marked with the military part number (39003/xx-xxxx) rather than the older style designation (xxxxxxxx) and should be ordered as such. All capacitors covered by IL-F are now ordered with the military part number as illustrated in the art Numbering ystem chart. apacitors must not be ordered using the style number identification. apacitance Tolerance: ± 5 %, ± 10 %, ± 20 % Voltage ating: 6 V to 100 V IL-F establishes failure rates (expressed in percent per 1000 h) based on exponential and Weibull distribution. are must be exercised in ordering to insure the part number correctly identifies the desired failure rate level. In addition, each order for military style 13, 21, 23 capacitors requiring government inspection must state whether inspection is to be at the destination or at the plant. Orders requiring source inspection cannot be shipped until this has been accomplished. tyle 13 capacitors previously shown in IL are directly replaced by style 13 and style 23 capacitors are extended capacitance range versions of military style 13. For information on the performance characteristics of these capacitors, please refer to the latest issue of the military specification. OEIN INFOATION / A /T AI OUENT NUE LAH HEET AH NUE UE UENT OTION LETTE AKAIN OTION (1) Indicates the asic pecification; in this case IL-F Indicates the pecification heet of the asic ilitary pecification Taken from atings table of the pecification heet lank = standard (no surge current) A =, after Weibull = -55 and, after Weibull = -55 and, before Weibull =, after Weibull, high temperature solder E = -55 and, after Weibull, high temperature solder F = -55 and, before Weibull, high temperature solder H = high temperature solder only (no surge) lank = bulk /T = tape and reel /H = tape and reel, half reel / = tape and reel, partial reel / = tape and reel, option /W = tape and reel, option W e (1) ee detailed packaging information following the tandard atings table evision: 16-Nov-17 1 ocument Number: 40018
2 IENION in inches [millimeters] J ± [38.10 ± 6.35] [2.4] ax. L OE L ± [0.79] + 6 [0.41] - 5 [0.38] ± [0.05] J (AX.) A [7.26] 35 [3.43] [0.51] [10.72] [12.04] 85 [4.70] [0.51] [15.49] [17.42] [7.34] [0.64] [20.88] [19.96] [8.92] [0.64] [23.42] es The case insulation shall extend 5" [0.38 mm] minimum beyond each end. However, when a shrink-fitted insulation is used, it shall lap over the ends of the capacitor body. A minimum lead length of " [2.54 mm] for use with tape and reel automatic insertion equipment is available upon request. ATIN AN OE μf 6 V 10 V 15 V 20 V 35 V 50 V 75 V 100 V A A A A A A A A A A A A 0 A A A 2 A A A 5 A A A 8 A A A 0.22 A A A 0.27 A A A 0.33 A A A 0.39 A A A 0.47 A A A 0.56 A A A 0.68 A A 0.82 A A 1.2 A 1.5 A 1.8 A 2.2 A 2.7 A 3.3 A 3.9 A 4.7 A 5.6 A 6.8 A evision: 16-Nov-17 2 ocument Number: 40018
3 ATIN AN OE μf 6 V 10 V 15 V 20 V 35 V 50 V 75 V 100 V TANA ATIN OE A. AT NO. - FAILUE ATE LEVEL (%/1000 h) AX. L (μa) AT -55 AX. F (%) AT 6 V AT, UE = 8 V; 4 V AT 5.6 A A A A A evision: 16-Nov-17 3 ocument Number: 40018
4 TANA ATIN OE A. AT NO. - FAILUE ATE LEVEL (%/1000 h) AX. L (μa) AT AX. F (%) AT 10 V AT, UE = 13 V; 7 V AT 3.9 A A A A A V AT, UE = 20 V; 10 V AT 2.7 A A A A A evision: 16-Nov-17 4 ocument Number:
5 TANA ATIN OE A. AT NO. - FAILUE ATE LEVEL (%/1000 h) AX. L (μa) AT AX. F (%) AT 20 V AT, UE = 26 V; 13 V AT 1.2 A A A A A A A A A A V AT, UE = 46 V; 23 V AT evision: 16-Nov-17 5 ocument Number:
6 TANA ATIN OE A. AT NO. - FAILUE ATE LEVEL (%/1000 h) AX. L (μa) AT AX. F (%) AT 50 V AT, UE = 65 V; 33 V AT A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A evision: 16-Nov-17 6 ocument Number:
7 TANA ATIN OE A. AT NO. - FAILUE ATE LEVEL (%/1000 h) AX. L (μa) AT AX. F (%) AT 50 V AT, UE = 65 V; 33 V AT V AT, UE = 98 V; 50 V AT 0 A A A A A A A A A A A A A A A A A evision: 16-Nov-17 7 ocument Number:
8 TANA ATIN OE A. AT NO. - FAILUE ATE LEVEL (%/1000 h) AX. L (μa) AT AX. F (%) AT 75 V AT, UE = 98 V; 50 V AT 0.33 A A A A A A A A A A A evision: 16-Nov-17 8 ocument Number:
9 TANA ATIN OE A. AT NO. - FAILUE ATE LEVEL (%/1000 h) AX. L (μa) AT AX. F (%) AT 100 V AT, UE = 130 V; 67 V AT A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A evision: 16-Nov-17 9 ocument Number:
10 TANA ATIN OE A. AT NO. - FAILUE ATE LEVEL (%/1000 h) 100 V AT, UE = 130 V; 67 V AT AX. L (μa) AT -55 AX. F (%) AT evision: 16-Nov ocument Number: 40018
11 TANA AKAIN QUANTITY OE QUANTITY (pcs/reel) ULK QUANTITY FULL EEL HALF EEL ATIAL EEL E TAY E OX A n/a INIE TAE AIN AKAIN OTION OE TAE AIN /T; /H; / / /W A,, A,, 2.47 ± 0.02 [62.7 ± 0.51] 2.88 ± 0.02 [73.0 ± 0.51] 2.05 ± 0.02 [52.1 ± 0.51] 2.47 ± 0.02 [62.7 ± 0.51] A, -, 2.05 ± 0.02 [52.1 ± 0.51] OUT INFOATION Quick eference uide elector uide arameter omparison uide ounting of Through-Hole omponents Frequently Asked Questions evision: 16-Nov ocument Number: 40018
12 Legal isclaimer ice Vishay isclaimer ALL OUT, OUT EIFIATION AN ATA AE UJET TO HANE WITHOUT NOTIE TO IOVE ELIAILITY, FUNTION O EIN O OTHEWIE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, Vishay ), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. tatements regarding the suitability of products for certain types of applications are based on Vishay s knowledge of typical requirements that are often placed on Vishay products in generic applications. uch statements are not binding statements about the suitability of products for a particular application. It is the customer s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. arameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer s technical experts. roduct specifications do not expand or otherwise modify Vishay s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. ustomers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. lease contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. roduct names and markings noted herein may be trademarks of their respective owners VIHAY INTETEHNOLOY, IN. ALL IHT EEVE evision: 08-Feb-17 1 ocument Number: 91000
Solid-Electrolyte TANTALEX Capacitors, Military MIL-PRF-39003/09 Qualified, Style CSR21
Solid-Electrolyte TANTALEX Capacitors, ilitary IL-PRF-39003/09 Qualified, Style CSR21 FEATURES Hermetically sealed etal cased Axial lead Weibull failure rates B, C, Exponential failure rates, P, R, S Low
More informationWet Tantalum Capacitors Sintered Anode TANTALEX Capacitors for Operation to +125 C, Elastomer-Sealed
Wet Tantalum Capacitors Sintered Anode TANTALEX Capacitors for Operation to, Elastomer-Sealed FEATURES Axial through-hole terminations: standard tin / lead (SnPb), 100 % tin (RoHS-compliant) available
More informationAluminum Capacitors Standard C Snap-In
Aluminum Capacitors Standard - 105 C Snap-In FEATURES Useful life: 2000 h at +105 C Polarized aluminum electrolytic capacitors Small dimensions High C x U product Material categorization: for definitions
More informationAluminum Capacitors Standard - 85 C Snap-In
Aluminum Capacitors Standard - 85 C Snap-In FEATURES Useful life: 2000 h at +85 C Polarized aluminum electrolytic capacitors Small dimension High C x U product Material categorization: for definitions
More informationSurface Mount Multilayer Ceramic Chip Capacitors for Non-Magnetic Applications (IR Reflow Soldering)
Surface Mount Multilayer Ceramic Chip Capacitors for Non-Magnetic Applications (IR Reflow Soldering) FEATURES Manufactured with non-magnetic materials Safety screened for magnetic properties C0G (NP0)
More informationNTC Thermistors, 2-Point Micro Chip Sensor Insulated Leads
NTC Thermistors, 2-Point Micro Chip Sensor Insulated Leads QUICK REFERENCE DATA PARAMETER VALUE UNIT Resistance value at 25 C 2.06K to 10K Ω Tolerance on R 25 -value ± 1.92; ± 2.19 % B 25/85 -value 3511
More informationSolid Tantalum Surface Mount, TANTAMOUNT, Molded Case, Very Low DCL
Solid Tantalum Surface Mount, TANTAMOUNT, Molded Case, Very Low DCL PERFORMANCE/ELECTRICAL CHARACTERISTICS www.vishay.com/doc?40088 Operating Temperature: - 55 C to + 125 C (above 85 C voltage derating
More informationSurface Mount Multilayer Ceramic Chip Capacitors for High Reliability Applications
Surface Mount Multilayer Ceramic Chip Capacitors for High Reliability Applications ELECTRICAL SPECIFICATIONS FEATURES Manufactured with a combination of design, materials and tight process control to achieve
More informationAluminum Electrolytic Capacitors Power Ultra Long Life Snap-In
Aluminum Electrolytic Capacitors Power Ultra Long Life Snap-In 158 PUL-SI 090 miniaturized 85 C PUL-SI Fig. 1 156 PUM-SI QUICK REFERENCE DATA DESCRIPTION VALUE Nominal case sizes (Ø D x L in mm) 22 x 25
More informationAC and Pulse Metallized Polypropylene Film Capacitors MKP Radial Potted Type
www.vishay.com AC and Pulse Metallized Polypropylene Film Capacitors MKP Radial Potted Type FEATURES Low loss dielectric Material categorization: for definitions of compliance please see www.vishay.com/doc?99912
More informationSurface Mount Multilayer Ceramic Chip Capacitors MIL Qualified, Type MIL-123
Surface Mount Multilayer Ceramic Chip Capacitors MIL Qualified, Type MIL-123 ELECTRICAL SPECIFICATIONS Note Electrical characteristics at +25 C, unless otherwise specified FEATURES Space-level reliability
More informationAluminum Electrolytic Capacitors Radial Very Low Impedance
Aluminum Electrolytic Capacitors Radial Very Low Impedance FEATURES Very low impedance and low ESR Very long useful life: 4000 h to 0 000 h at 05 C, very high reliability Excellent ripple current capability
More informationT95 D 107 K 010 E A A S TYPE CASE CODE DC VOLTAGE RATING AT + 85 C TERMINATION AND PACKAGING
T95 Solid Tantalum Chip Capacitors, FEATURES High reliability; Weibull grading available Surge current testing per MIL-PRF-55365 options available Standard and low ESR options Terminations: SnPb, standard.
More informationAluminum Electrolytic Capacitors Power Ultra Miniature Snap-In
Aluminum Electrolytic Capacitors Power Ultra Miniature Snap-In 057 PSM-SI smaller dimensions 159 PUL-SI 105 C 157 PUM-SI Fig. 1 longer life higher ripple 198 PHR-SI QUICK REFERENCE DATA DESCRIPTION VALUE
More informationAluminum Electrolytic Capacitors Power Miniaturized Economy Long Life Snap-In
Aluminum Electrolytic Capacitors Power Miniaturized Economy Long Life Snap-In FEATURES Useful life: 2000 h at 105 C Polarized aluminum electrolytic capacitors, non-solid electrolyte Large types, miniaturized
More informationAluminum Electrolytic Capacitors Radial Standard Ultra Miniature
Aluminum Electrolytic Capacitors Radial Standard Ultra Miniature FEATURES Polarized aluminum electrolytic capacitors, non-solid electrolyte Radial leads, cylindrical aluminum case, insulated with a blue
More informationAluminum Electrolytic Capacitors Power Ultra Long Life Snap-In
Aluminum Electrolytic Capacitors Power Ultra Long Life Snap-In 059 PLL-SI 159 miniaturized 85 C PUL-SI Fig. 1 157 PUM-SI QUICK REFERENCE DATA DESCRIPTION VALUE Nominal case size (Ø D x L in mm) 22 x 25
More information1/4" Square Single-Turn Cermet Sealed Trimmer
/4" Square Single-Turn Cermet Sealed Trimmer FEATURES Industrial grade Fully sealed Miniature package Rotor designed for automatic machine adjust interface Withstands harsh environments and immersion cleaning
More informationØ 5 mm Film Dielectric Trimmers
Ø 5 mm Film Dielectric Trimmers FEATURES Housing diameter 5 mm Top and bottom or top adjustment Round head Mounting: radial Material categorization: for definitions of compliance please see www.vishay.com/doc?99912
More informationHigh Voltage Ceramic DC Disc Capacitors with Axial Leads, 10 kv DC to 30 kv DC
High Voltage Ceramic DC Disc Capacitors with Axial Leads, 10 kv DC to 30 kv DC FEATURES Available Class 1 and class 2 ceramic High insulation resistance Epoxy encapsulated Wide capacitance range Ceramic
More informationAluminum Electrolytic Capacitors, Power High Ripple Current, Screw Terminals
Aluminum Electrolytic Capacitors, Power High Ripple Current, Screw Terminals FEATURES Long useful life: 10 000 h to 15 000 h at +85 C Available in case sizes up to Ø 90 mm x 220 mm Polarized aluminum electrolytic
More informationSurface Mount Multilayer Ceramic Chip Capacitors for Commercial Applications
Surface Mount Multilayer Ceramic Chip Capacitors for Commercial Applications ELECTRICAL SPECIFICATIONS FEATURES C0G (NP0) and X7R dielectrics offered C0G (NP0) is an ultra-stable dielectric offering a
More informationFilm Dielectric Trimmers
Film Dielectric Trimmers FEATURES High temperature type Housing dimensions: 8 mm x 9 mm x 10 mm For a basic grid of 2.54 mm Versions available with 1 or 2 rotor contacts Top and bottom adjustment Mounting:
More informationFilm Dielectric Trimmers
Film Dielectric Trimmers FEATURES High temperature type Housing dimensions: 11 mm x 14 mm x 9 mm For a basic grid of 2.54 mm Top adjustment Mounting: radial Material categorization: for definitions of
More informationSurface Mount Multilayer Ceramic Chip Capacitors for Non-Magnetic Applications (Epoxy Bonding)
Surface Mount Multilayer Ceramic Chip Capacitors for Non-Magnetic Applications (Epoxy Bonding) ELECTRICAL SPECIFICATIONS NON-MAGNETIC C0G (NP0) GENERAL SPECIFICATION Note Electrical characteristics at
More informationNTC Thermistors, 2-Point Radial Leaded, Automotive Grade
NTC Thermistors, 2-Point Radial Leaded, Automotive Grade FEATURES High accuracy over a wide temperature range High stability over a long life Exceptional thermal shock withstanding performance AEC-Q200
More informationAC and Pulse Polypropylene Film Capacitors MKP Radial Epoxy Lacquered Type
A and Pulse Polypropylene Film apacitors MKP Radial Epoxy Lacquered Type seating plane (1) P APPLIATIONS Low losses due to low contact resistance and low loss dielectric result in applications where high
More informationAutomotive, Sulfur Resistant Lead (Pb)-Free Thick Film, Rectangular Chip Resistors
Automotive, Sulfur Resistant Lead (Pb)-Free Thick Film, Rectangular Chip Resistors STANDARD ELECTRICAL SPECIFICATIONS MODEL CASE SIZE INCH CASE SIZE METRIC POWER RATING P 70 C W LIMITING ELEMENT VOLTAGE
More informationHigh Power, High Current EDG Mica Grid Resistors, Grid Mill Bank Design
High Power, High Current EDG Mica Grid Resistors, Grid Mill Bank Design FEATURES assembly 8 kw at 40 C Superior watt density for higher powers in same space EDG technology support system improved for lighter
More informationAluminum Capacitors, Power High Ripple Current, Screw Terminals
Aluminum Capacitors, Power High Ripple Current, Screw Terminals FEATURES Long useful life: 10 000 h to 15 000 h at +85 C Available in case sizes up to Ø 90 mm x 220 mm Polarized aluminum electrolytic capacitors,
More informationHigh Current Thermal Fuse
High Current Thermal Fuse FEATURES Functioning temperature: F = (235 ± 15) C Holding temperature: H = 160 C Current: 50 A Suitable for insert assembly systems Material categorization: For definitions of
More informationWirewound Resistors, Industrial Power, Tubular, Ribwound (RB), Fixed (RBEF, RBSF)
REF, RSF Wirewound Resistors, Industrial Power, Tubular, Ribwound (R), Fixed (REF, RSF) FETURES High temperature silicone or vitreous enamel coatings Excellent for pulsing applications ll welded construction
More informationNTC Thermistors, Mini Epoxy PVC Insulated Leads
NTC Thermistors, Mini Epoxy PVC Insulated Leads FEATURES High adhesive strength between the PVC wire and the encapsulating lacquer Accurate down to ± 0.3 C Small body of max. 3 mm for easy installation
More informationAluminum Capacitors, Power General Purpose Screw Terminals
Aluminum Capacitors, Power General Purpose Screw erminals FEAURES Useful life: 5000 h at +85 C Efficient design Available in case sizes up to Ø 90 mm x 220 mm Polarized aluminum electrolytic capacitors,
More informationAluminum Capacitors +85 C, Large Can
Aluminum Capacitors +85 C, arge Can FEATURES Useful life: 2000 h at +85 C The industry standard for large can aluminum capacitors Ideal for high wattage power supplies and energy storage applications Capacitance
More informationWet Tantalum Capacitors Cylindrical Body, Hermetically Sealed
Wet Tantalum Capacitors Cylindrical Body, ermetically Sealed PERFORMANCE CARACTERISTICS Operating Temperature: to +175 C with proper derating Voltage Range: 8 V C to 630 V C at 85 C Reverse Voltage: none
More information1/2" (12.7 mm) Conductive Plastic and Cermet Potentiometer
1/2" (12.7 mm) Conductive Plastic and Cermet Potentiometer FEATURES Robust construction High rotational life (50 000 cycles) Up to three sections PC support plates Rotary switches and solder lugs terminals
More informationSMD 0805, NTC Thermistors AgPd Terminations
NTCS0805E4.../2381 615 1... SMD 0805, NTC Thermistors AgPd REMARK Non preferred type (replaced by NTCS0805E3...T/2381 615 5...) QUICK REFERENCE DATA PARAMETER VALUE UNIT Resistance value at 25 C 2K to
More information1/4" Square Single-Turn Cermet Sealed Trimmer
/4" Square Single-Turn Cermet Sealed Trimmer FEATURES Industrial grade Fully sealed Miniature package Rotor designed for automatic machine adjust interface Withstands harsh environments and immersion cleaning
More informationWirewound Resistors, Industrial Power, Vitreous Coated, Adjustable Edgewound Tubular
Wirewound Resistors, Industrial Power, Vitreous oated, djustable Edgewound Tubular STNR ELETRIL SPEIFITIONS GLOL HISTORIL POWER RTING P 25 W FETURES High temperature vitreous coating omplete welded construction
More informationPower Panel 6 W Potentiometer
Power Panel 6 W Potentiometer FEATURES High power rating 6 W at 50 C Cermet element Full sealing Mechanical strength Industrial and professional grade Tests according to CECC 41000 or IEC 60393-1 Material
More informationCeramic Singlelayer DC Disc Capacitors for General Purpose Class 1, Class 2, and Class 3, 1 kv DC, 2 kv DC, 3 kv DC, 6 kv DC
Ceramic Singlelayer DC Disc Capacitors for General Purpose Class 1, Class 2, and Class 3, 1 kv DC, 2 kv DC, 3 kv DC, 6 kv DC EATURES High capacitance with small size High stability Crimp and straight lead
More information9 mm Multi-Ganged Potentiometer
9 mm Multi-Ganged Potentiometer QUICK REFERENCE DATA Multiple module Up to 7 modules Switch module n/a Detent module Yes Special electrical laws A: linear, L: logarithmic, F: reverse logarithmic and others
More informationNTC Thermistors, Flex Foil Sensors
NTC Thermistors, Flex Foil Sensors QUICK REFERENCE DATA PARAMETER VALUE UNIT Resistance value at 25 C 10K, 47K Tolerance on R 25 -value ± 3 % B 25/85 -value 3960 K Tolerance on B 25/85 -value ± 1 % Operating
More informationAluminum Electrolytic Capacitors, Power High Ripple for Traction, Screw Terminals
Aluminum Electrolytic Capacitors, Power igh Ripple for raction, Screw erminals FEAURES ong useful life: > 10 000 h at +85 C Available in case sizes up to Ø 90 mm x 220 mm ow ESR Polarized aluminum electrolytic
More informationFilm Dielectric Trimmers
TEST VOLTAGE (DC) FOR 1 MINUTE: 5 V MAXIMUM CONTACT RESISTANCE: 5 mω MINIMUM INSULATION RESISTANCE: 1 MΩ FEATURES High temperature type Housing dimensions: 1 mm x 11 mm x 11 mm For a basic grid of 2.54
More informationWirewound Resistors, Industrial Power, Vitreous Coated, Adjustable Tubular
Wirewound Resistors, Industrial Power, Vitreous oated, djustable Tubular FETURES High temperature vitreous coating omplete welded construction Tight tolerance of 5 % for values above 1 Excellent stability
More informationWirewound Resistor, Industrial High Power, Vitreous Tubular, Adjustable, Low Values 0.12 to 560
Wirewound Resistor, Industrial High Power, Vitreous Tubular, djustable, Low Values to 560 FETURES High power rating: 16 W to 600 W at 25 C Heavy overloads 10 P n 15 s 1 % Low ohmic values 0.10 available
More information9 mm Multi-Ganged Potentiometer
9 mm Multi-Ganged Potentiometer FEATURES Conductive plastic element Ultra compact (extra miniature module size) Multiple assemblies (up to seven modules) Shaft and panel sealed option Center mechanical
More informationPolyester Capacitors Filmite E, ORANGE DROP, Radial Lead
Polyester Capacitors Filmite E, ORANGE DROP, Radial ead PERFORMANCE CHARACTERITIC Operating Temperature: - 55 C to + 85 C To + 105 C when working voltage is reduced to 70 % of + 85 C rating; to + 125 C
More informationAluminum Capacitors Power High Ripple Current Snap-In
Aluminum Capacitors 198 PHR-SI 057 PSM-SI smaller dimensions Fig. 1 Component outlines 198 PHR-SI QUICK REFERENCE DATA longer life higher ripple 157 PUM-SI DESCRIPTION VALUE Nominal case size (Ø D x L
More informationSolid Tantalum Chip Capacitors TANTAMOUNT Conformal Coated, Maximum CV, Low ESR
TANTAMOUNT Conformal Coated, FEATURES Large capacitance rating range Lowest for a surface mount tantalum chip capacitor % surge current conditioning for C, D and R cases Terminations: Tin (2) standard
More informationPower Panel 6 W Potentiometer
Power Panel 6 W Potentiometer FEATURES High power rating 6 W at 50 C Cermet element Full sealing Mechanical strength Industrial and professional grade Tests according to CECC 41000 or IEC 60393-1 Material
More informationAluminum Capacitors Power Ultra Long Life Snap-In
059 PLL-SI QUICK REFERENCE DATA DESCRIPTION Nominal case size (Ø D x L in mm) Fig.1 Component outlines 159 miniaturized 85 C PUL-SI VALUE 22 x 25 to 35 x 60 157 PUM-SI Rated capacitance range (E6/E12 series),
More informationAluminum Capacitors + 85 C, Powerlytic Electrolytics
Aluminum Capacitors + 85 C, Powerlytic Electrolytics QUICK REFERENCE DATA + 75 %, - 10 % DESCRIPTION VALUE Operating temperature - 20 C to + 85 C Tolerance on C R : 3 WV DC to 75 WV DC 100 WV DC to 450
More informationNTC Thermistors, Radial Leaded and Coated
N hermistors, Radial Leaded and oated QUIK REFERENE DAA PARAEER VALUE UNI Resistance value at 25 30 to 1 olerance on R 25 -value (point matched) ± 1, ± 5, ± 10 % emperature accuracy (curve tracking) ±
More informationSolid Tantalum Chip Capacitors TANTAMOUNT, Commercial, Surface Mount
Solid Tantalum Chip Capacitors PERFORMANCE/ELECTRICAL CHARACTERISTICS Operating Temperature: - 55 C to + 85 C (To + 125 C with voltage derating) Note: Refer to Doc. 40088 Capacitance Range: 0.10 µf to
More informationLower Voltage Ceramic Disc Capacitors 2 kvdc to 7.5 kvdc
Lower Voltage eramic isc apacitors 2 kv to 7.5 kv Fig. 1 FEAURES max. 1.250" min. (32 mm) inned opper Leads LO Low losses High capacitance in small sizes High stability Radial leads 0.125" (3.2 mm) max.
More informationResin-Coated, Radial-Leaded Solid Tantalum Capacitors
FEATURES RoHS Compliant design available Flame retardant encapsulation Very high temperature range Improved humidity class Low leakage current Very high CV product Low failure rate Pb-free Available RoHS*
More informationNTC Thermistors, Radial Leaded and Coated
N hermistors, Radial Leaded and oated QUIK REFERENE DAA PARAEER VALUE UNI Resistance value at 25 30 to 1 Ω olerance on R 25 -value (point matched) ± 1, ± 5, ± 10 % emperature accuracy (curve tracking)
More informationSMD 0402, Glass Protected NTC Thermistors
2381 615 4.../NTCS0402E3...T SMD 0402, Glass Protected QUICK REFERENCE DATA PARAMETER Resistance value at 25 C VALUE 4.7 kω to 100 kω Tolerance on R 25 - value ± 1 %; ± 2 %; ± 3 %; ± 5 % B 25/85 value
More informationSolid Tantalum Surface Mount Capacitors TANTAMOUNT Molded Case, Low ESR
Solid Tantalum Surface Mount Capacitors TR3 FEATURES Terminations: 100 % Matte Tin, standard Tin/lead available Molded case available in six case codes Compatible with High Volume automatic pick and place
More informationTransient Voltage Suppressor
Features 400W surge capability at 1ms Excellent clamping capability Low zener impedance Fast response time : typically less then 1.0 ps from 0 volt to VBR(min.) Typical IR less then 1μA above 10V RoHS
More informationMKT 368 Vishay BCcomponents
Metallized Polyester Film apacitors MKT 368 Vishay Bcomponents 168x12(halfpage) l w FEATURES Available taped on reel and loose in box seating plane (1) α h Lead (Pb)-free product RoHS-compliant product
More informationØ 7.5 mm Film Dielectric Trimmers
TEST VOLTAGE (DC) FO 1 MINUTE: 5 V MAXIMUM CONTACT ESISTANCE: 1 mω MINIMUM INSULATION ESISTANCE: 1 MΩ CATEGOY TEMPEATUE ANGE: PP - 4 to + 7 C PE, PC, PTFE, PET - 4 to + 85 C CLIMATIC CATEGOY (IEC 668):
More informationMetallized Polyester Film Capacitors MKT Radial Potted Type
MKT 373 168x12(halfpage) l w h FEATURES Available taped and loose in box Lead (Pb)-free product RoHS-compliant product APAITANE TOLERANE ± 10 %; ± 5 % e3 RoHS OMPLIANT P lt Ødt RATED (D) VOLTAGE V; 250
More informationWet Tantalum Capacitors, Military Established Reliability, MIL-PRF Qualified Styles CLR65, 69, 79, 81, 90, 91
Wet Tantalum Capacitors, ilitary Established eliability, IL-F-39006 Qualified Styles CL65, 69, 79, 81, 90, 91 FEUES Hermetically sealed etal cased Axial lead Tubular SECIFICIONS Style CL65, 39006/09 Style
More information1/2" (12.7 mm) Conductive Plastic and Cermet Potentiometers
, /" 7 mm Conductive Plastic and Cermet FEATURES Robust construction High rotational life cycles Up to three sections PC support plates Rotary switches and solder lugs terminals available Compliant to
More informationXTH-K-L-M-V Vishay Wet Tantalum Capacitors Cylindrical Body, Hermetically Sealed
XT-K-L-M-V Wet Tantalum Capacitors FEATURES igh temperature igh voltage igh capacitance Withstands high frequency vibration to 2000 z ermetically sealed Long shelf life SCC rawings 04032 & 04033 PERFORMANCE
More informationAluminum Capacitors Power High Ripple Current Screw Terminals
101/102 PHR-ST Aluminum Capacitors FEATURES ST STB Fig.1 Component outline Polarized aluminum electrolytic capacitors, non-solid electrolyte Large types, cylindrical aluminum case, insulated with a blue
More informationNTC Thermistors, Molded Range
2381 641 6... N Thermistors, Molded Range FEATURES Excellent for surface temperature measurement Designed for harsh environments Based on the 2322 640 0... naked thermistor chips. Old part number was 2322
More informationWet Tantalum Capacitors, Military Established Reliability, MIL-PRF Qualified Styles CLR65, 69, 79, 81, 90, 91
39006/09/21/22/25/30/31 Wet Tantalum Capacitors, ilitary Established eliability, FEATUES Hermetically sealed etal cased Axial lead Tubular SECIFICATIONS Style CL65, 39006/09 Style CL69, 39006/21 Style
More informationFEATURES. SMD Style. Reflow soldering. Lead (Pb)-free APPLICATIONS. U R (V) x 5.8
ECV Aluminum Capacitors FEATURES Polarized aluminum electrolytic capacitors SMD Style Miniature dimension Pb-free Available RoHS* COMPLIANT Extended temperature range: 105 C QUICK REFERENCE DATA DESCRIPTION
More informationAluminum Capacitors Radial Style
FEATURES Polarized Aluminum electrolytic capacitor High C x U product Small dimensions Compliant to RoHS directive 2002/95/EC Component outlines. Obsolete - please refer to: www.vishay.com/doc?25014 APPLICATIONS
More informationTruckWeigh. PM Onboard. Selection Guide. Overload Monitoring System for Medium and High Capacity Trucks. A Brand of VPG On-Board Weighing
Selection Guide Overload Monitoring for Medium High Capacity Trucks PM Onboard A Br of VPG On-Board Weighing www.obwvpg.com DISCLAIMER: ALL PRODUCTS, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE
More information1N4728A to 1N4764A. Zener Diodes. Vishay Semiconductors
Zener Diodes Features Silicon Planar Power Zener Diodes For use in stabilizing and clipping circuits with high power rating. Standard Zener voltage tolerance is ± 5 %. Applications Voltage stabilization
More informationAluminum Capacitors + 85 C, Powerlytic Electrolytics
FEATURES Designed for applications requiring greatest possible capacitance in small physical case sizes QUICK REFERENCE DATA DESCRIPTION VALUE Operating temperature - 20 C to + 85 C Tolerance on C R :
More informationTrimmable Thick Film Flat Chip Resistors
Trimmable Thick Film Flat Chip Resistors FEATURES Designed for state of the art laser trimming Enables economical functional circuit adjustment Low TCR available Excellent stability ± 0.25 % (1000 h rated
More informationSelf Contained Weighing Module
Self Contained Weighing Module Model 9010 FEATURES Capacities 3-90kg Unique adjustable tare load cancelling mechanism Highly effective viscous damping 6 Built-in overload limit stops in three directions
More informationMarket Solutions. High-Speed Weighing Celtron Sensortronics Revere Tedea-Huntleigh Brands of VPG Transducers.
Market Solutions High-Speed Weighing Celtron Sensortronics Revere Tedea-Huntleigh Brands of www.vpgtransducers.com Build the VPG Advantage into Your High-Speed Weighing Applications Shorter settling time
More informationCB Series Tantalum Capacitors
Series Features: Lead-Free. Specially designed of general purpose. Highly reliable resin dipped type. xcellent frequency and temperature characteristics. Non-flammable epoxy resin. Specifications: Item
More informationPTC Thermistors Motor Start Packages
PTC Thermistors Motor Start Packages QUICK REFERENCE DATA PARAMETER VALUE UNIT Resistance value at 25 C 15 to 75 Tolerance on resistance value ± 30 % Maximum current ratings 6 to 36 A RMS Switching temperature
More informationROTARY SWITCHES 50% +20º P.M. P.F.
O SICHS PIC PPICIONS Fully Customiseable to V ccording Pb (2/53/C) / ohs2 (2/65/U) Cost ffective asy Design For more than 2 years PIH has been manufacturing rotary switches for all types of applications.
More informationThin Film Chip Fuses
Thin Film Chip Fuses FEATURES Advanced thin film technology Very quick acting fuse characteristics Outstanding stability of fusing characteristics Green product, supports lead (Pb)-free soldering Merial
More information1W, 10V - 200V Surface Mount Silicon Zener Diode
1W, 10V - 200V Surface Mount Silicon Zener Diode FEATURES Photo Glass passivated junction Ideal for automated placement Low inductance Typical IR less than 1μA above 11V Compliant to RoHS Directive 2011/65/EU
More informationEND USER TERMS OF USE
END USER TERMS OF USE The following is the End Users Terms of Use as it currently appears in the Mobileye User Manual and Warranty information. This is here for your review and information; it is subject
More informationMarket Solutions. High-Speed Weighing Celtron Sensortronics Revere Tedea-Huntleigh Brands of VPG Transducers.
Market Solutions High-Speed Weighing Celtron Sensortronics Revere Tedea-Huntleigh Brands of www.vpgtransducers.com Build the VPG Advantage into Your High-Speed Weighing Applications Shorter settling time
More informationK3020P/ K3020PG Series
Optocoupler, Phototriac Output, 400 V V DRM K3020P/ K3020PG Series Features Isolation materials according to UL 94-VO Pollution degree 2 (DIN/VDE 0110 resp. IEC 60664) Climatic classification 55/100/21
More informationSRP7030F Series - Shielded Power Inductors
*RoHS COMPLIANT 8R2 Features Shielded construction Flat wire Unit height as low as 3. mm Inductance range:.1 to 1 μh Rated current up to 32 A RoHS compliant* This series is currently available but not
More informationAluminum Capacitors + 85 C, Powerlytic Electrolytics
39D Aluminum Capacitors FEATURES Designed for applications requiring greatest possible capacitance in small physical case sizes QUICK REFERENCE DATA DESCRIPTION VALUE Operating temperature - 20 C to +
More informationMACP TB. 23 db Coupler MHz Rev. V1. Features. Functional Schematic. Description. Pin Configuration 4. Ordering Information 1,2
23 Coupler Features 23 Coupling Ratio Surface Mount Package Available on Tape and Reel Excellent Temperature Stability RoHS Compliant and Pb Free 260 C Reflow Compatible Description The MACP-0145 is a
More informationAgilent N2763A Rack Mount Kit for 4000 X-Series Oscilloscopes
Agilent N2763A Rack Mount Kit for 4000 X-Series Oscilloscopes Installation Guide Agilent Technologies Notices Agilent Technologies, Inc. 2012 No part of this manual may be reproduced in any form or by
More information1.5KE SERIES Taiwan Semiconductor
Transient Voltage Suppressor FEATURES - Excellent clamping capability - Low dynamic impedance - 1500W surge capability at 10 / 0 μs waveform - Fast response time: Typically less than 1.0ps from 0 volt
More information1N5221B~1N5266B SILICON ZENER DIODES FEATURES MECHANICAL DATA MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS. VOLTAGE 2.4 to 68 Volt POWER 500 mwatt
SILION ZENER DIODES VOLTAGE 2.4 to 68 Volt POWER 500 mwatt FEATURES Planar Die construction 500mW Power Dissipation Ideally Suited for Automated Assembly Processes Lead free in compliance with EU RoHS
More informationU37L SERIES Engineering Bulletin Mar 2013
EIE Large an crew erminals General Purpose U37 Grade High ipple 350 to 500VD atings oh ompliant 10,000 Hours Lifetime at 85 Up to 175,000 Hours Useful Life he series is a longer life version of the U37
More informationConductive Polymer Aluminum Capacitors SMD (Chip), Low Impedance
Conductive Polymer Aluminum Capacitors SMD (Chip), Low Impedance FEATURES Useful life: up to 2000 h at 105 C Very low ESR and high ripple current High voltages up to 100 V AEC-Q200 qualified products on
More informationType 381EL 105 ºC Ultra-Long Life Snap-In, Aluminum More than 100,000 Hours Operation at 65 C and Rated 105 C Ripple OBSOLETE
Specifications Temperature Range Rated Voltage Range 160 to 450 Vdc Capacitance Range 39 µf to 2,200 µf ± 20% Capacitance Tolerance ± 20% Leakage Current Ripple Current Multipliers The new 381EL extends
More informationAgilent N5470A Series Oscilloscope Rack Mount Kit
Agilent N5470A 90000 Series Oscilloscope Rack Mount Kit Installation Guide Agilent Technologies Notices Agilent Technologies, Inc. 2005, 2007 No part of this manual may be reproduced in any form or by
More informationToro Sprayer Calibration Tool
Commercial Products Toro Sprayer Calibration Tool User Guide & Installation Instructions Toro Sprayer Calibration Tool 1 Table of Contents Introduction... 2 Program Instructions... 4 Toro Software End
More informationU37F SERIES Engineering Bulletin Mar 2013
EIE Large an crew erminals General Purpose U37 Grade High ipple 350 to 500VD atings oh ompliant 5,000 Hours Lifetime at 85 Up to 150,000 Hours Useful Life he series is a general purpose, screw mount U37
More information