Type 520C 85 C Long Life, Inverter Grade, Aluminum High Ripple, Long Life Screw Terminal Type
|
|
- Augustine Spencer
- 6 years ago
- Views:
Transcription
1 click here to see hardware and mounting options Type 520C 85 C Long Life, Inverter Grade, Aluminum Type 520C is the 85 C version of the Type 550C Inverter-Grade capacitor. It delivers the ripple-current capability and exceptional life needed for motor-drive bus capacitors and approaches the performance of the 550C at lower cost. It is rated for 8000 h life with full ripple current, rated voltage, 85 C and 00 lfm airflow while mounted horizontally. Horizontal mounting is more severe than vertical mounting. The extended cathode foil of the 520C assures heat flow from the capacitor element to the can in all orientations. Specifications Highlights - 8,000 hour load life - Ripple current to 55 amps - ESRs to 8 mω - Best value high ripple current - Thermal-Pak extended cathode construction Temperature Range 40 C to +85 C Rated Voltage Range 200 Vdc to 500 Vdc Capacitance Range 84 µf to 39,000 µf Capacitance Tolerance 0% +50% Leakage Current Ripple Current Multipliers 3 CV µa, 5 ma max, 5 minutes Ambient Temperature 45 ºC 55 ºC 65 ºC 75 ºC 85 ºC Frequency k 5 k 0 k & up 3/8 & 3/4 Diameters 200 to 350 V to 500 V & 2 /2 Diameters 200 to 350 V to 500 V & 3 /2 Diameters 200 to 350 V to 500 V Low Temperature Characteristics Impedance ratio: Z 20⁰C Z +25⁰C 3 ( Vdc) Endurance Life Test 8000 h at full load at 85 C Capacitance ±20% ESR 200% of limit DCL 00% of limit Shelf Life Test 500 h at 85 C Capacitance 00% of limit ESR 00% of limit DCL 00% of limit Vibration 0 to 55, 0.06 and 0 g max,.5 h each of 2 axes RoHS Compliant CDM Cornell Dubilier 40 Technology Place Liberty, SC Phone: (864) Fax: (864)
2 ing System 520C 572 T 400 DF 2 B S Type Capacitance Tolerance Voltage Case Code Insulation Terminal Can Style 572 =5700 µf M = ±20% 200 = 200 Vdc 0= None U = 0%+75% 400 = 400 Vdc = Polyester T = 0%+50% 2= PVC Outline Drawing D Standard insulation is in PVC sleeve with 0.0-in polypropylene end disk. Polyester insulation is not available for 3.5 inch diameter units. A = Low Post B = High Post D = High Current, Low Post E = High Current, High Post F or M = M5 Post G = M6 Low Post H = M6 High Post Blank= Standard Can S= Stud Bottom P= Stud with Thermal Pad + S L H ( ) Stud Dimensions Case Stud P± Diam. Thread (±.0 mm).375 M (2.0).750 M (2.0) M (6.0) M (6.0) M (6.0) M (6.0) Optional Stud P NOTE: With the stud-mount feature, a thermally-conductive disk can be inserted in the bottom flush with the outer insulating sleeve.this reduces the thermal resistance through the can bottom by 0.3 C/W. Can Style P. Terminal Dimensions For Case Post Diameter H max min Full Thread Torque Terminal Style Diameters Code in mm in mm Thread in mm in lb N m Low Post ⅜ to 3 A High Post ⅜ to 3 B High Current, Low 2½ to 3½ D ¼ High Current, High 2½ to 3½ E ¼ M5 Post, Small ⅜ to 2 M M M5 Post 2½ & 3 F M M6 Low Post 2½ to 3½ G M M6 High Post 2½ to 3½ H M CDM Cornell Dubilier 40 Technology Place Liberty, SC Phone: (864) Fax: (864)
3 Uninsulated Case Dimensions For insulated case, add (0.60 mm) to D and (0.762 mm) to length. Diam. (D) Length (L) Terminals (S) Typical Weight Case Code ±.03 Inches ±.78 mm ±.062 Inches ±.57 mm ±0.05 Inches ±.38 mm oz g AK AA AH AB AJ AC AD AE AF EA EH EB EJ EC ED EE EF BA BH BB BJ BC BD BE BF CH CB CJ CC CD CE CF DB DJ DC DD DE DF DM DP DN DG FC FD FE FF FP FN FG FM CDM Cornell Dubilier 40 Technology Place Liberty, SC Phone: (864) Fax: (864)
4 25 C 20 Ripple 85 C 20 (A) Nominal Size D x L (inches) Additional Smaller Sizes available at 25 C Vdc (250 Vdc Surge) 250 Vdc (300 Vdc Surge) Ripple 85 C 20 (A) Nominal Size D x L (inches) C322T200CH2B /2 x 2 5/ C63T250FP2D /2 x 5 7/ C442T200CB2B /2 x 3 / C83T250DG2D x 8 5/ C572T200CJ2B /2 x 3 5/ C223T250FN2D /2 x 7 5/ C642T200DB2B x 3 / C263T250FG2D /2 x 8 5/ C702T200CC2B /2 x 4 /8 300 Vdc (350 Vdc Surge) C822T200CD2B /2 x 4 5/ C62T300CH2B /2 x 2 5/ C822T200DJ2B x 3 5/ C222T300CB2B /2 x 3 / C952T200CD2B /2 x 5 / C292T300CJ2B /2 x 3 5/ C03T200DC2B x 4 / C342T300DB2B x 3 / C3T200CF2B /2 x 5 5/ C352T300CC2B /2 x 4 / C23T200DD2B x 4 5/ C42T300CD2B /2 x 4 5/ C43T200DE2B x 5 / C432T300DJ2B x 3 5/ C53T200FC2D /2 x 4 / C482T300CD2B /2 x 5 / C63T200DF2B x 5 5/ C532T300DC2B x 4 / C63T200DP2B x 5 7/ C542T300CF2B /2 x 5 5/ C73T200FD2D /2 x 4 5/ C632T300DD2B x 4 5/ C203T200FE2D /2 x 5 / C722T300DE2B x 5 / C223T200DN2D x 7 5/ C742T300FC2D /2 x 4 / C233T200FF2D /2 x 5 5/ C822T300DF2B x 5 5/ C243T200FP2D /2 x 5 7/ C872T300DP2B x 5 7/ C263T200DG2D x 8 5/ C882T300FD2D /2 x 4 5/ C343T200FN2D /2 x 7 5/ C03T300FE2D /2 x 5 / C393T200FG2D x 8 5/ C3T300FF2D /2 x 5 5/8 250 Vdc (300 Vdc Surge) C23T300DN2B x 7 5/ C22T250CH2B /2 x 2 5/ C23T300FP2D /2 x 5 7/ C302T250CB2B /2 x 3 / C43T300DG2B x 8 5/ C392T250CJ2B /2 x 3 5/ C73T300FN2D /2 x 7 5/ C432T250DB2B x 3 / C203T300FG2D /2 x 8 5/ C472T250CC2B /2 x 4 /8 350 Vdc (400 Vdc Surge) C562T250CD2B /2 x 4 5/ C52T350CH2B /2 x 2 5/ C562T250DJ2B x 3 5/ C202T350CB2B /2 x 3 / C642T250CD2B /2 x 5 / C262T350CJ2B /2 x 3 5/ C682T250DC2B x 4 / C32T350DB2B x 3 / C732T250CF2B /2 x 5 5/ C322T350CC2B /2 x 4 / C802T250DD2B x 4 5/ C382T350CD2B /2 x 4 5/ C932T250DE2B x 5 / C402T350DJ2B x 3 5/ C03T250FC2D /2 x 4 / C442T350CD2B /2 x 5 / C3T250DF2B x 5 5/ C482T350DC2B x 4 / C3T250DP2B x 5 7/ C492T350CF2B /2 x 5 5/ C23T250FD2D /2 x 4 5/ C572T350DD2B x 4 5/ C43T250FE2D /2 x 5 / C662T350DE2B x 5 / C53T250FF2D /2 x 5 5/ C682T350FC2D /2 x 4 / C63T250DN2B x 7 5/ C752T350DF2B x 5 5/8 CDM Cornell Dubilier 40 Technology Place Liberty, SC Phone: (864) Fax: (864)
5 Additional Smaller Sizes available at 25 C 20 Ripple 85 C 20 Nominal Size (A) D x L 25 C Vdc (400 Vdc Surge) 450 Vdc (500 Vdc Surge) Ripple 85 C 20 (A) Nominal Size D x L (inches) C792T350DP2B x 5 7/ C252T450DJ2B x 3 5/ C802T350FD2D /2 x 4 5/ C272T450CE2B /2 x 5 / C922T350FE2D /2 x 5 / C32T450CF2B /2 x 5 5/ C03T350FF2D /2 x 5 5/ C32T450DC2B x 4 / C03T350FF2D /2 x 5 5/ C362T450DD2B x 4 5/ C3T350FP2D /2 x 5 7/ C422T450DE2B x 5 / C33T350DG2B x 8 5/ C432T450FC2D /2 x 4 / C53T350FN2D /2 x 7 5/ C472T450DF2B x 5 5/ C83T350FG2D /2 x 8 5/ C502T450DP2B x 5 7/8 400 Vdc (450 Vdc Surge) C502T450FD2D /2 x 4 5/ C2T400CH2B /2 x 2 5/ C582T450FE2D /2 x 5 / C62T400CB2B /2 x 3 / C662T450FF2D /2 x 5 5/ C202T400CJ2B /2 x 3 5/ C702T450FP2D /2 x 5 7/ C242T400CC2B /2 x 4 / C702T450DN2B x 7 5/ C242T400DB2B x 3 / C82T450DG2B x 8 5/ C292T400CD2B /2 x 4 5/ C952T450FN2D /2 x 7 5/ C302T400DJ2B x 3 5/ C3T450FG2D /2 x 8 5/ C332T400CD2B /2 x 5 /8 500 Vdc (550 Vdc Surge) C372T400DC2B x 4 / C63T500CH2B /2 x 2 5/ C382T400CF2B /2 x 5 5/ C89T500CB2B /2 x 3 / C442T400DD2B x 4 5/ C2T500CJ2B /2 x 3 5/ C502T400DE2B x 5 / C32T500DB2B x 3 / C522T400FC2D /2 x 4 / C42T500CC2B /2 x 4 / C572T400DF2B x 5 5/ C62T500CD2B /2 x 4 5/ C62T400DP2B x 5 7/ C72T500DJ2B x 3 5/ C62T400FD2D /2 x 4 5/ C92T500CD2B /2 x 5 / C702T400FE2D /2 x 5 / C22T500DC2B x 4 / C802T400FF2D /2 x 5 5/ C222T500CF2B /2 x 5 5/ C842T400DN2B x 7 5/ C252T500DD2B x 4 5/ C852T400FP2D /2 x 5 7/ C292T500DE2B x 5 / C982T400DG2B x 8 5/ C302T500FC2D /2 x 4 / C23T400FN2D /2 x 7 5/ C332T500DF2B x 5 5/ C43T400FG2D /2 x 8 5/ C352T500DP2B x 5 7/8 450 Vdc (500 Vdc Surge) C352T500FD2D /2 x 4 5/ C92T450CH2B /2 x 2 5/ C402T500FE2D /2 x 5 / C32T450CB2B /2 x 3 / C462T500FF2D /2 x 5 5/ C62T450CJ2B /2 x 3 5/ C482T500FP2D /2 x 5 7/ C92T450DB2B x 3 / C482T500DN2B x 7 5/ C202T450CC2B /2 x 4 / C562T500DG2B x 8 5/ C242T450CD2B /2 x 4 5/ C672T500FN2D /2 x 7 5/8 CDM Cornell Dubilier 40 Technology Place Liberty, SC Phone: (864) Fax: (864)
6 Typical Performance Curves Ratio to 25 ºC, 20 Value Capacitance vs Frequency and Temperature 3600 µf 400 V 85 ºC 65 ºC 25 ºC 0 ºC 20 ºC Ratio to Initial Value Ripple Life Test, 4700 ºF 400 Vdc (60 ºC, 360 V, 34 ) ESR 25 ºC ESR 85 ºC Capacitance 40 ºC Frequency () Time (hours) 000 ESR vs Frequency and Temperature 3600 µf 400 V 00 Impedance vs Frequency and Temperature 3600 µf 400 V Ratio to 25 ºC, 20 Value ºC 0 20 ºC 0 ºC 25 ºC 65 ºC 85 ºC Frequency () Ratio to 25 ºC, 20 Value ºC 20 ºC 0 ºC 25 ºC 65 ºC 85 ºC Frequency () Expected Operating Life, kh Expected Operating Life, kh Type 520C Operating Life in Kilohours vs Ripple Current 000 Type 520C Operating Life in Kilohours vs Ripple Current ⁰C 45 ºC 55⁰C 55 ºC 00 65⁰C ºC 75⁰C 75 ºC 85⁰C 85 ºC Rated Ripple-Current Multiple Rated Ripple-Current Multiple CDM Cornell Dubilier 40 Technology Place Liberty, SC Phone: (864) Fax: (864)
7 Notice and Disclaimer: All product drawings, descriptions, specifications, statements, information and data (collectively, the Information ) in this datasheet or other publication are subject to change. The customer is responsible for checking, confirming and verifying the extent to which the Information contained in this datasheet or other publication is applicable to an order at the time the order is placed. All Information given herein is believed to be accurate and reliable, but it is presented without any guarantee, warranty, representation or responsibility of any kind, expressed or implied. Statements of suitability for certain applications are based on the knowledge that the Cornell Dubilier company providing such statements ( Cornell Dubilier ) has of operating conditions that such Cornell Dubilier company regards as typical for such applications, but are not intended to constitute any guarantee, warranty or representation regarding any such matter and Cornell Dubilier specifically and expressly disclaims any guarantee, warranty or representation concerning the suitability for a specific customer application, use, storage, transportation, or operating environment. The Information is intended for use only by customers who have the requisite experience and capability to determine the correct products for their application. Any technical advice inferred from this Information or otherwise provided by Cornell Dubilier with reference to the use of any Cornell Dubilier products is given gratis (unless otherwise specified by Cornell Dubilier), and Cornell Dubilier assumes no obligation or liability for the advice given or results obtained. Although Cornell Dubilier strives to apply the most stringent quality and safety standards regarding the design and manufacturing of its products, in light of the current state of the art, isolated component failures may still occur. Accordingly, customer applications which require a high degree of reliability or safety should employ suitable designs or other safeguards (such as installation of protective circuitry or redundancies or other appropriate protective measures) in order to ensure that the failure of an electrical component does not result in a risk of personal injury or property damage. Although all product-related warnings, cautions and notes must be observed, the customer should not assume that all safety measures are indicated in such warnings, cautions and notes, or that other safety measures may not be required.
Type 550C 105 C High Ripple, Inverter Grade, Aluminum Ultra-Ripple, Long Life Screw Terminal Type
click here to see hardware and mounting options Specifications Temperature Range 4 C to +5 C Rated Voltage Range 2 Vdc to 5 Vdc Capacitance Range 68 µf to 35, µf Capacitance Tolerance % +5% Type 55C is
More informationType 4CMC 85 ºC, High Cap, Plug-in, Radial Leaded Aluminum Rugged Value, High-Capacitance 85 C Board-Mount Type
Type 4CMC is the PC-mount version of the high-capacitance Type DCMC screw-terminal capacitor and has about 50% more capacitance per can size through 250 V. It s for bus fltering applications where more
More informationType 381LQ 105 ºC Compact, High Ripple, Snap-In Aluminum Higher Capacitance per Case Size
Type 381LQ is on average 23% smaller and more than 5 mm shorter than Type 381LX. This is achieved with a new can closure method that permits installing capacitor elements into smaller cans. Approaching
More informationType 381LQ 105 ºC Compact, High Ripple, Snap-In Aluminum Higher Capacitance per Case Size
Type 381LQ is on average 23% smaller and more than 5 mm shorter than Type 381LX. This is achieved with a new can closure method that permits installing capacitor elements into smaller cans. Approaching
More informationType 381EL 105 ºC Ultra-Long Life Snap-In, Aluminum More than 100,000 Hours Operation at 65 C and Rated 105 C Ripple OBSOLETE
Specifications Temperature Range Rated Voltage Range 160 to 450 Vdc Capacitance Range 39 µf to 2,200 µf ± 20% Capacitance Tolerance ± 20% Leakage Current Ripple Current Multipliers The new 381EL extends
More informationType 381LX / 383LX 105 C High Ripple, Snap-In Aluminum High Ripple, Long Life, 2, 4 and 5 pin styles available
High Ripple, Long Life, 2, 4 and 5 pin styles available Specifications Temperature Range Rated Voltage Range Adding longer-life and more ripple capability to the excellent value of Type 380L/LX capacitors,
More informationType 380LX / 382LX 85 C High Capacitance, Snap-In Aluminum
The excellent value of Type 380L/LX capacitors finds application in switching power supply input and output circuits and even motor drives where the high surface area of multiple units in parallel approaches
More informationType 947D Polypropylene, High Energy Density, DC Link Capacitors
Type 947D series uses the most advanced metallized film technology for long life and high reliability in DC Link applications. This series combines high capacitance and very high ripple current capability
More informationType CGS High-Cap Screw Terminal Aluminum Electrolytic Capacitor
High CV, Screw Terminal Capacitors Specifcations Type CGS screw terminal, aluminum electrolytic capacitors have a high CV rating and are suitable for use in most demanding applications requiring high current
More informationType 401C 55 C to 105 C Low-ESR, Wide Temperature Grade
The Ultimate in Cold Performance and ESR Specifications Operating Temperature: Rated Voltage: Capacitance: DC Leakage Current: Cold Impedance: The Type 401C is the wide-temperature, low-voltage version
More informationType BPDS Polypropylene Board Mount DC Link Capacitors PCB Mount Power Film Capacitors
Specifications Capacitance Range Capacitance Tolerance 1μF - 200 μf ±5%(J) ±10%(K) Rated Voltage 450 Vdc - 1800 Vdc @ 85 C, 500 Vdc - 2000 Vdc @ 70 C Maximum Operating Temperature +105 C Upper Temperature
More informationDISCONTINUED CONTACT KEMET FOR EQUIVALENT REPLACEMENT
Dipped, Radial Leaded, Solid Tantalum Capacitors Specifications Capacitance Range: Voltage Range: Tolerance: Operating Temperature Range: DC Leakage: Capacitance Change imum: Reverse Voltage (Non-continuous):
More informationType SLP 105 C Snap-In Aluminum Electrolytic Best Value 105 C Snap-In Type
Type SLP is the best value package snap-in series for 05 ºC, 3000 h operation. This series is the most cost-effective choice for DC filtering and power supply applications where high temperature, long
More informationOBSOLETE. General Specifications. Key Features. Applications. Outline Dimensions CLR 79 (MIL-C-39006/22) CLR 81 (MIL-C-39006/25)
General Specifications Operating : Working Voltage: Key Features Applications -55 C to +125 C, with voltage derating above 85 C, ( voltage at 125ºC is 2/3 of the value at 85ºC) 6 to 125 WVdc Tolerance:
More informationCylindrical Types, High-Voltage Mica Capacitors Types 291, 292, 293, 294 Cylindrical Case, High-Current and High-Voltage Circuits
Types 291, 292, 293, 294 Cylindrical Case, High-Current and High-Voltage Circuits Specifications acitance Range: 47 pf to 0.1 µf Voltage Range: 1 to 30 kvpk acitance Tolerance: ±2% (G), ±5% (J) Temperature
More informationApplications. Capacitance Tolerance Snap-In type Aluminum Electrolytic. Capacitance Code Version
Snap-In Aluminum Electrolytic Capacitors PEH506 Series, +85 C Overview Applications KEMET's PEH506 is a long-life electrolytic capacitor designed to offer high ripple current capability and low mounting
More informationApplications. Capacitance Tolerance Snap-In type Aluminum Electrolytic. Capacitance Code Version
Snap-In Aluminum Electrolytic Capacitors PEH534 Series, +105 C Overview Applications KEMET's PEH534 is a long-life electrolytic capacitor designed to offer high ripple current capability and low mounting
More informationApplications. Capacitance Tolerance Snap-In type Aluminum Electrolytic. Capacitance Code Version
Snap-In Aluminum Electrolytic Capacitors PEH536 Series, +105 C Overview Applications KEMET's PEH536 is a long-life electrolytic capacitor designed to offer high ripple current capability and low mounting
More informationApplications. Overview. Technical Specifications
FLLD4 TH, 53/35 VAC, 8 A High Performance Chassis Mount Three-Phase and Neutral Filters Overview These are compact, general purpose, three-phase + N filters, with terminal blocks for quick installation
More informationApplications MDC K 50 A52 P3 TUBE. Capacitance Tolerance. J = ±5 K = ±10% Other tolerances on request. F 15 3 A A 333 K 050 T
Overview Dual in-line (DIL) metallized polyester (PET) film capacitor for surface mounting. Encapsulation in self-extinguishing material meeting the requirements of UL 94 V 0. Applications Typical applications
More informationApplications MDS K 50 A52 P3 TUBE. Capacitance Tolerance J = ±5 K = ±10% Other tolerances on request. F 17 3 A A 333 K 050 T
MDS, Dual In-Line Low Profile, 50 630, High Current Overview Dual in-line (DIL) metallized polyester (PET) film capacitor is encapsulated in a self-extinguishing material, meeting the requirements of UL
More informationU36D SERIES Engineering Bulletin Mar 07
Series SERIES Large Can Screw Terminals High Ripple Up to 550VDC Dimensions in Inches RoHS Compliant 85 C Maximum Temperature The series is ideal for inverter applications requiring high ripple current
More informationApplications. represent significant figures. Third digit specifies number of zeros.
Snap-In Aluminum Electrolytic Capacitors ALC80, +105 C Overview Applications The KEMET ALC80 High CV snap-in capacitors offer high performance and reliability in a wide range of case sizes and voltage
More informationGeneral Purpose, Pulse and DC Transient Suppression MDK Series Metallized Polyester Film, Dual In-Line, Low ESR/ESL, VDC.
General Purpose, Pulse and DC Transient Suppression MDK Series Metallized Polyester Film, Dual In-Line, Low ESR/ESL, 50 630 VDC Overview Dual in-line (DIL) metallized polyester (PET) film capacitor. Encapsulation
More informationInsulated Version M8 Stud (M12 Stud) Non-Insulated Version M8 Stud (M12 Stud) Aluminum Electrolytic Capacitors Accessories Mounting Kits
Insulated Version M8 Stud (M12 Stud) Non-Insulated Version M8 Stud (M12 Stud) Dimensions in mm. All of the above accessories may be ordered individually using the part number shown or as kits using the
More informationSummary of Specifications
Series Large Can Screw Terminals High Ripple 6.3 to 400VDC Range Dimensions in Inches RoHS Compliant 105 C Maximum Temperature The series allows for extremely high ripple currents for applications such
More information55 C to +105 C 6.3, 10, 16, 25, 35, 50, 63, 80 & 100 Vdc. Shelf Test: C. 0.3 mm Max. A
Type AFK 55 C to 5 C SMT Aluminum Electrolytic Capacitors - Lowest E.S.R., 5 C Low Impedance and Long-Life for Filtering, Bypassing and Power Supply Decoupling Specifications Life Test: Operating Temperature:
More informationApplications. Capacitance Code Version. The last two digits represent significant figures. The first digit indicates the total number digits.
Axial Aluminum Electrolytic Capacitors PEG124, +105 C and +125 C Overview Applications KEMET's PEG124 is an electrolytic capacitor with very longlife and outstanding electrical performance. The device
More information16 ~ 250 VDC -40 ~ +105 C 820~250000µF ± 20% For capacitance values > 33000µF, add the value of:
T-HA Series 105 C, 3000 hours Long Life - endurance rating of 3000 hours at 105 C 4 or 5 terminal mounting provides stability and keyed polarity Extended higher CV ratings RoHS Compliant Rated Working
More informationALC40 Series 105 C. RoHS. Compliant
ALC40 Series Compact Long life, 9000 hours at 105 C (Ur, Ir applied High ripple current Excellent surge voltage capability Optimized designs available on request RoHS Compliant application Suited for high
More informationType AVS SMT Aluminum Electrolytic Capacitors - General Purpose, 85 C
General Purpose Filtering, Bypassing, Power Supply Decoupling Specifications Operating Temperature: Rated voltage: Capacitance: D.F. (@ 20 C): Capacitance Tolerance: Leakage Current: Ripple Current Multipliers:
More informationALC10 Series 85 C. RoHS. Compliant
ALC10 Series Compact size Long Life, 18000 hours at (Ur, Ir applied High ripple current Excellent surge voltage capability Optimized designs available on request RoHS Compliant application They are ideally
More informationPrinted Circuit Board Mount Power Film Capacitors C4G Series, Axial Round, VDC/ VAC. Applications. Lead Diameter (mm) Insulation
Printed Circuit Board Mount Power Film Capacitors Overview Applications The C4G capacitor is a polypropylene metallized film capacitor with a polyester tape wrapping filled with resin, and uses tinned
More informationOverview. Applications. Benefits. Part Number System. Screw Terminal Supercapacitors S301 Series, Screw Termination, 2.7 V, 65ºC
Screw Terminal Supercapacitors S301 Series, Screw Termination, 2.7 V, 65ºC Overview KEMET S301 Series Supercapacitors utilize a proprietary electrode design to deliver a very high power density. This product
More informationFor capacitance values > 33000µF, add the value of: 3 CV (µa) max. after 5 minutes; C = Capacitance in µf, V = WV ~ k 10k
T-UP Series 85 C, 3000 hours 4 or 5 terminal mounting provides stability and keyed polarity Extended CV ratings Can vent construction RoHS Compliant Rated Working Voltage: Operating Temperature: Nominal
More informationApplications. represent significant figures. Third digit specifies number of zeros.
Snap-In Aluminum Electrolytic Capacitors ALC10, +85 C Overview Applications The KEMET ALC10 snap-in capacitors covers a wide range of case sizes and voltage ratings. The ALC10 is designed for high voltage,
More informationHeavy Duty Actuators CONTROLS. Pneumatic Actuators for Quarter-Turn Valves and Dampers Torques to 1,600,000 in. lbs. Double Acting and Spring Return
CONTROLS Division of A-T Controls Heavy Duty Actuators Pneumatic Actuators for Quarter-Turn Valves and Dampers Torques to,600,000 in. lbs. Double Acting and Spring Return THD S E R I E S The Triac line
More informationType AHA SMT Aluminum Electrolytic Capacitors -55 C to +105 C - Long Life
Long Life Filtering, Bypassing, Power Supply Decoupling Capacitors deliver twice the life of many SMT aluminum capacitor types, and they handle high levels of ripple current. The AHA can handle the ripple
More informationpart of the EVOX RIFA GROUP
part of the EVOX RIFA GROUP 29 series Listed here are only samples of the range of PCB mounting Snap-In Capacitors we can produce. Electrical characteristics and case size are just two parameters that
More informationOverview. Applications. Benefits. Part Number System. Screw Terminal Supercapacitors S301 Series, Screw Termination, 2.7 V, 65ºC
Screw Terminal Supercapacitors S301 Series, Screw Termination, 2.7 V, 65ºC Overview KEMET S301 Series Supercapacitors utilize a proprietary electrode design to deliver a very high power density. This product
More informationSee Dimension Table. The last two digits represent significant figures. The first digit specifies the total number of digits.
Screw Terminal Aluminum Electrolytic Capacitors PEH169 Series, +85 C Overview Applications KEMET's PEH169 Series is a long-life electrolytic capacitor with outstanding reliability and electrical performance.
More informationNot for new design after March 31, 2016 Snap-In Supercapacitors S501 Series, Snap-In, 2.7 V, 65ºC
Snap-In Supercapacitors S501 Series, Snap-In, 2.7 V, 65ºC Overview KEMET S501 Series Supercapacitors use a proprietary electrode design to deliver a very high power density. This product features high
More informationPrinted Circuit Board Mount Power Film Capacitors C4G Series, Axial Round, VDC/ VAC. Applications. Lead Diameter (mm) Insulation
Printed Circuit Board Mount Power Film Capacitors Overview Applications The C4G Series is a polypropylene metallized film with polyester tape wrapping filled with resin and tinned copper wires. Typical
More informationApplications. represent significant figures. Third digit specifies number of zeros.
Press-Fit Aluminum Electrolytic Capacitors ALF40, +105 C Overview Applications The KEMET ALF40 Press-Fit capacitors eliminate the need for solder, the associated production and quality issues. They are
More informationApplications. represent significant figures. Third digit specifies number of zeros.
Press-Fit Aluminum Electrolytic Capacitors ALF20, +85 C Overview Applications The KEMET ALF20 Press-Fit capacitors eliminate the need for solder, and therefore, the associated production and quality issues.
More informationSummary of Specifications
Large an Screw erminals Longer Life U36 Grade High Ripple 350 to 500VD Ratings RoHS ompliant 85 Maximum emperature he series is a longer life version of the industry standard U36D specifically designed
More informationSITRANS F flowmeters. SITRANS F O delta p - Primary differential pressure devices. Orifice plate with annular chambers. 4/358 Siemens FI
Application Dimensional drawings Suitable for non-corrosive and corrosive gases, vapors and liquids; permissible operating temperature -60 to +550 C. Design Two support rings with replaceable orifice disk
More informationSupercapacitor Development Balancing Kit
Overview The KEMET Supercapacitor Development Kit includes a two-stage active balancing circuit to complement the S301 Screw Terminal Supercapacitor Series. Each kit contains enough balancing cards, bus
More informationSee Dimension table. The last two digits represent significant figures. The first digit specifies the total number of digits.
Screw Terminal Aluminum Electrolytic Capacitors PEH200 Series, +85 C Overview Applications KEMET's PEH200 Series of capacitors has a polarized all-welded design, heavy duty screw terminals, extended cathode
More informationApplications F 622 J F 104 M 050 C. Capacitance Code (pf) First two digits represent significant figures. Third digit specifies number of zeros.
General Purpose, Pulse and DC Transient Suppression F622 Series Metallized Polyester Film, 5 mm Lead Spacing, 50 630 VDC Overview The F622 Series is constructed of metallized stacked polyester film capacitor
More informationSnap-in Type Aluminium Electrolytic Capacitors
Endurance: 85 2000hours Recommended Applications : Applying to switching power supply and other industry/ commercial field Corresponding product to RoHS SPECIFICATIONS Item Category Temperature Range -40~+85
More informationApplications C87 8 B F AA 4 J
C87, Cylindrical Aluminum Case, Overpressure Protection, 420 VAC/470 VAC Overview C87 is a polypropylene metallized film, with a cylindrical aluminium can-type construction filled with resin. It uses faston,
More informationApplications SPC K 100 K33 TR12. Capacitance Tolerance G = ±2% H = ±2.5% J = ±5% K = ±10% F 127 S L 471 K 100 V
SPC Series Encapsulated Double Metallized, Size 2824 6560, 100 630 VDC Overview Film capacitor for surface mounting. Double sided metallized film as electrode. Plain polyphenylene sulfide (PPS) as dielectric.
More informationPerformance Characteristics -40 to +85 (160Vdc~450Vdc) -25 to +85 (500Vdc~630Vdc) 160 to 630 V DC Working Voltage(VDC) 160~ ~550
Standard capacitors Applications Frequency converters Uninterruptible power supplies All-welded construction ensures reliable electrical contact Self-extinguishing electrolyte RoHS-compatible Specifications
More informationPrinted Circuit Board Mount Power Film Capacitors C4G Series, Axial Round, VDC/ VAC. Applications. Lead Diameter (mm) Insulation
Printed Circuit Board Mount Power Film Capacitors Overview Applications The C4G Series is a polypropylene metallized film with polyester tape wrapping filled with resin and tinned copper wires. Typical
More informationApplications ALC10 A 392 BB 040. Series Termination Capacitance Code (µf) Size Code Rated Voltage (VDC) Snap-In type Aluminum Electrolytic
Snap-In Aluminum Electrolytic Capacitors ALC10 Series, +85ºC Overview KEMET s ALC10 Series of snap-in capacitors covers a wide range of case sizes and voltage ratings. The ALC10 Series is designed for
More informationALS30 Series 85 C. RoHS. Compliant
ALS30 Series Compact size Long life, 20000 hours at (Ur, Ir applied High ripple current Excellent surge voltage capability Optimized designs available on request RoHS Compliant application Basic design
More informationSSR SSR SSR SSR
DMX 52 Page DMX52 decoder firing board module 20 VAC reference Input 2 3 4 The Thyristor Firing board is compatible withdmx52 control standard 4 DMX52 triggers 2 3 4 - +- +- +- + The can trigger control
More informationAN RPM to TACH Counts Conversion. 1 Preface. 2 Audience. 3 Overview. 4 References
AN 17.4 RPM to TACH Counts Conversion 1 Preface 2 Audience 3 Overview 4 References This application note provides look up tables for the calculation of RPM to TACH Counts for use with the EMC2103, EMC2104,
More informationAluminum Capacitors +85 C, Large Can
Aluminum Capacitors +85 C, arge Can FEATURES Useful life: 2000 h at +85 C The industry standard for large can aluminum capacitors Ideal for high wattage power supplies and energy storage applications Capacitance
More informationTHD. Series. Heavy Duty Actuators. Pneumatic Actuators for Quarter-Turn Valves and Dampers CONTROLS. Torques to 1,600,000 In-lbs
CONTROLS Division of A-T Controls, Inc. THD Series Heavy Duty Actuators Pneumatic Actuators for Quarter-Turn Valves and Dampers Torques to 1,600,000 In-lbs Double Acting and Spring Return Symmetric and
More informationApplications F5A H C 4100 DQ A 6 K. Lead and Packaging Code See Ordering Options Table. Capacitance Code (pf)
F5A Series Metallized Polyester Film with Integrated Ceramic Varistor, 18 63 VDC Overview The F5A Series is a metallized polyester (MKT) film capacitor with integrated ceramic varistor encapsulated in
More informationSELECT 3-BURNER PROPANE BARBECUE Assembly Manual
SELECT 3-BURNER PROPANE BARBECUE Assembly Manual 85-3096-2 (G31221) Propane 1 Year limited Warranty Read and save manual for future reference. Assemble your grill immediately. Missing or damaged parts
More informationDATE: May 19, 2000 Service Instruction No. 1443E (Supersedes Service Instruction No. 1443D) Engineering Aspects are FAA Approved
DATE: May 19, 2000 (Supersedes Service Instruction No. 1443D) Engineering Aspects are FAA Approved SUBJECT: MODELS AFFECTED: TIME OF COMPLIANCE: Approved Slick Magnetos on Textron Lycoming Engines See
More informationApplications. Capacitance Code. First two digits represent significant figures. Third digit specifies number of zeros.
Screw Terminal Aluminum Electrolytic Capacitors ALS36/37 Series, +85 C Overview Applications KEMET's ALS36/37 Series of screw terminal capacitors meets the requirements of the North American market. This
More informationSnap-in Type Aluminium Electrolytic Capacitors
Endurance:105 3000 hours Recommended Applications : Smoothing circuit, TV/Monitor,Adapter, SMPS Corresponding product to RoHS Long Life LG SPECIFICATIONS Item Category Temperature Range Range Rated acitance
More informationGeneral Purpose, High Stability and AC Line EMI Suppression MDC Series Dual In-Line, VDC, High Current. Applications
General Purpose, High Stability and AC Line EMI Suppression MDC Series Dual In-Line, 50 630 VDC, High Current Overview Dual in-line (DIL) metallized polyester (PET) film capacitor for surface mounting.
More informationOverview. Applications. Benefits. Part Number System. Screw Terminal Aluminum Electrolytic Capacitors ALS32/33 Series, +85 C
Screw Terminal Aluminum Electrolytic Capacitors ALS32/33 Series, +85 C Overview Applications KEMET s ALS32/33 Series of screw terminal capacitors meets the requirements of the Asian market. This range
More informationApplications PEG124 E F Q T1
Axial Aluminum Electrolytic Capacitors PEG124 Series, +105ºC and +125ºC Overview KEMET's PEG124 is an electrolytic capacitor with very longlife and outstanding electrical performance. The device has a
More informationCAT. No. KS-570E. SCS Single Action Push Type. SCD Double Action Type. super. cylinder FUJIKURA RUBBER LTD.
CAT. No. KS-570E SC SCS Single Action Push Type SCD Double Action Type super cylinder FUJIKURA RUBBER LTD. General Description of BF Cylinders FC Series : Single/Double Action Standard Cylinders SC Series
More informationVACUUM PRESSURE PUMPS INSTALLATION CAUTIONS AND INFORMATION READ AND FOLLOW CAREFULLY!
F.A.A.-P.M.A. MODEL 1U128A AND 1U128B REVISION 17 February 21, 2002 VACUUM PRESSURE PUMPS INSTALLATION CAUTIONS AND INFORMATION READ AND FOLLOW CAREFULLY! The following information applies to all installations
More informationApplications. Output Voltage (V) V21 = 2
Current Sensors L2, Magnetic Direct Current Sensor Overview The L2 Magnetic Direct Current Sensors (MDCS TM ) use our proprietary magnetic material and hall element for magnetic detection of direct current
More informationSummary of Specifications
Series Snap Mount Large High CV High Ripple RoHS Compliant 85 C Maximum Temperature The series capacitors are the standard 85 C, large capacitance, snap-in capacitors from United Chemi-Con. The load life
More informationContents CORNELL DUBILIER
Contents Products Listed by Type Designation........................................................ Chip and SMT Selector Guide................................................................... 1.001
More informationGeneral Purpose, High Stability and AC Line EMI Suppression MMC Series Encapsulated Winding, Size , VDC.
General Purpose, High Stability and AC Line EMI Suppression MMC Series Encapsulated Winding, Size 2220 6560, 50 400 Overview KEMET s MMC Series polyester (PET) film capacitor for surface mounting is encapsulated
More informationAluminum Capacitors, Power High Ripple Current, Screw Terminals
Aluminum Capacitors, Power High Ripple Current, Screw Terminals FEATURES Long useful life: 10 000 h to 15 000 h at +85 C Available in case sizes up to Ø 90 mm x 220 mm Polarized aluminum electrolytic capacitors,
More informationAluminum Electrolytic Capacitors Radial Standard Ultra Miniature
Aluminum Electrolytic Capacitors Radial Standard Ultra Miniature FEATURES Polarized aluminum electrolytic capacitors, non-solid electrolyte Radial leads, cylindrical aluminum case, insulated with a blue
More informationSM20 B 153 K 501 B M. Capacitance Tolerance K = ±10% M = ±20%
KPS HV, Large Case, SM Series, X7R Dielectric, 500 10,000 VDC (Industrial Grade) Overview KPS HV (KEMET Power Solutions, High Voltage), Large Case ( 1515), SM Series capacitors in X7R dielectric are designed
More informationSummary of Specifications
Series Large Can Screw Terminal 85 C General Purpose High Ripple Current Capability Extended Range to 550VDC Dimensions in Inches The series is ideal for inverter applications requiring high ripple current
More informationSM20 N 472 J 501 B M. Capacitance Tolerance J = ±5% K = ±10% M = ±20%
KPS HV, Large Case, SM Series, C0G Dielectric, 500 10,000 VDC (Industrial Grade) Overview KPS HV (KEMET Power Solutions, High Voltage), Large Case ( 1515), SM Series capacitors in C0G dielectric are designed
More informationAluminum Electrolytic Capacitors Radial Very Low Impedance
Aluminum Electrolytic Capacitors Radial Very Low Impedance FEATURES Very low impedance and low ESR Very long useful life: 4000 h to 0 000 h at 05 C, very high reliability Excellent ripple current capability
More informationApplications. Internal Connection
Overview Polypropylene metallized film with cylindrical aluminium can type filled with oil, 3 phase terminal delta and safety device FPU. Applications Typical applications include power factor correction.
More informationAluminum Electrolytic Capacitors Power Miniaturized Economy Long Life Snap-In
Aluminum Electrolytic Capacitors Power Miniaturized Economy Long Life Snap-In FEATURES Useful life: 2000 h at 105 C Polarized aluminum electrolytic capacitors, non-solid electrolyte Large types, miniaturized
More informationSMM SERIES Engineering Bulletin Mar 07
Series SERIES Snap Mount Downsize High Long Life RoHS Compliant 85 C Maximum Temperature The series is a high voltage, long life snap-in capacitor series that offers downsized versions of the SMH series.
More informationtan δ (120 Hz/+20 C) Add 0.02 per 1000 µf for products of 1000 µf or more. F±0.5 L<16 :L±1.5 L>20 :L±2.0
Radial Lead Type Series: FK Type: A Features Low impedance (10 % to 30 % less than FC Se ries) Miniaturization (30 % to 40 % less than FC Series) Endurance : 3000 h to 5000 h at +105 C RoHS directive compliant
More informationAluminum Capacitors Power High Ripple Current Screw Terminals
101/102 PHR-ST Aluminum Capacitors FEATURES ST STB Fig.1 Component outline Polarized aluminum electrolytic capacitors, non-solid electrolyte Large types, cylindrical aluminum case, insulated with a blue
More informationAluminum Electrolytic Capacitors Power Ultra Long Life Snap-In
Aluminum Electrolytic Capacitors Power Ultra Long Life Snap-In 059 PLL-SI 159 miniaturized 85 C PUL-SI Fig. 1 157 PUM-SI QUICK REFERENCE DATA DESCRIPTION VALUE Nominal case size (Ø D x L in mm) 22 x 25
More informationApplications. Capacitance Code. First two digits represent significant figures. Third digit specifies number of zeros.
Screw Terminal Aluminum Electrolytic Capacitors ALS40/41 Series, +105 C Overview Applications KEMET's ALS40/41 Series of screw terminal capacitors features the same high ripple currents and long-life characteristics
More informationAluminum Capacitors Power High Ripple Current Snap-In
Aluminum Capacitors 198 PHR-SI 057 PSM-SI smaller dimensions Fig. 1 Component outlines 198 PHR-SI QUICK REFERENCE DATA longer life higher ripple 157 PUM-SI DESCRIPTION VALUE Nominal case size (Ø D x L
More informationAluminum Electrolytic Capacitor JNK
FEATES Extended Lifetime at High ripple current High Professional Switch Mode Power Supplies Frequency Converters SPECIFICATIONS Items Performance Characteristics Operating Temperature Range ( ) -40 ~
More informationPolypropylene Pulse/High Frequency Capacitors R74 Series Single Metallized Polypropylene Film, Radial, AC Applications (Automotive Grade)
Polypropylene Pulse/High Frequency Capacitors R74 Series Single Metallized Polypropylene Film, Radial, AC Applications (Automotive Grade) Overview The R74 Series is constructed of metallized polypropylene
More informationAluminum Electrolytic Capacitors, Power High Ripple Current, Screw Terminals
Aluminum Electrolytic Capacitors, Power High Ripple Current, Screw Terminals FEATURES Long useful life: 10 000 h to 15 000 h at +85 C Available in case sizes up to Ø 90 mm x 220 mm Polarized aluminum electrolytic
More informationAluminum Electrolytic Capacitors Power Ultra Miniature Snap-In
Aluminum Electrolytic Capacitors Power Ultra Miniature Snap-In 057 PSM-SI smaller dimensions 159 PUL-SI 105 C 157 PUM-SI Fig. 1 longer life higher ripple 198 PHR-SI QUICK REFERENCE DATA DESCRIPTION VALUE
More informationELITE 2-BURNER PROPANE BARBECUE Assembly Manual
ELITE 2-BURNER PROPANE BARBECUE Assembly Manual 85-3136-8 (G36402) Propane 1 Year limited Warranty Read and save manual for future reference. Assemble your grill immediately. Missing or damaged parts claims
More informationPRIME 3-BURNER PROPANE BARBECUE Assembly Manual
PRIME 3-BURNER PROPANE BARBECUE Assembly Manual 85-3135-0 / G32010 1 Year limited Warranty Read and save manual for future reference. Assemble your grill immediately. Missing or damaged parts claims must
More informationAluminum Electrolytic Capacitors Power Ultra Long Life Snap-In
Aluminum Electrolytic Capacitors Power Ultra Long Life Snap-In 158 PUL-SI 090 miniaturized 85 C PUL-SI Fig. 1 156 PUM-SI QUICK REFERENCE DATA DESCRIPTION VALUE Nominal case sizes (Ø D x L in mm) 22 x 25
More informationSITRANS F flowmeters. SITRANS F O delta p - Primary differential pressure devices Metering pipe with orifice plate and annular chambers 4/369
and annular chambers Application Suitable for non-corrosive and corrosive gases, vapors and liquids; permissible operating temperature -10 to +00 C. Design Orifice plate with annular chambers consisting
More informationLong life with high capacitance (30% smaller than HB series) 2 and 3 pin versions available RoHS compliant PVC and RoHS compliant PET sleeve options
TS-HC Series 105 C, 2000 hours Long life with high capacitance (30% smaller than HB series) 2 and 3 pin versions available RoHS compliant PVC and RoHS compliant PET sleeve options RoHS Compliant Rated
More informationTM ETRS-TM35FIN-ETRS89 WTG
Noise calculation model: ISO 9613-2 General Wind speed: 8,0 m/s Ground attenuation: General, Ground factor: 0,4 Meteorological coefficient, C0: 0,0 db Type of demand in calculation: 1: WTG noise is compared
More informationApplications. Rated Voltage (VDC) 160 = = = = = = = = = 500
Snap-In Aluminum Electrolytic Capacitors ELD, +105ºC Overview Applications The KEMET ELD aluminum electrolytic snap-in capacitors are designed with snap-lock terminals for printed circuit board mounting.
More information