CAT. No. KS-570E. SCS Single Action Push Type. SCD Double Action Type. super. cylinder FUJIKURA RUBBER LTD.
|
|
|
- Rafe Rogers
- 5 years ago
- Views:
Transcription
1 CAT. No. KS-570E SC SCS Single Action Push Type SCD Double Action Type super cylinder FUJIKURA RUBBER LTD.
2 General Description of BF Cylinders FC Series : Single/Double Action Standard Cylinders SC Series : Single/Double Action Super Cylinders PC Series : Single/Double Action Pocket Cylinders TC Series : Single Thin Cylinders TD Series : Double Action Thin Cylinders BF Cylinders are bound together by unique unrivaled common features, which are all attributable to the rolling action of BF Diaphragms. Perfect Leak-proof Very Low Friction Lubrication-Free Excellent resistance to pressure No Blow-By Leakage. : Responsive to minute pressure variations. : Virtually no hysteresis- loss in movement. : Low start up pressure as low as 0.01MPa. : Smooth "Non- Jarring" action. : Ready to start even after long interval. No Lubricator required in the air line. Assured by the rolling principle of BF Diaphragms. ( Molded products of durable fabric-reinforced NBR) BF Cylinders find its best applications in such cases where air leakage is not allowed and/or sensitive response is desired to minute pressure variations. Sensitive Actuators in Automatic Controllers & Instruments, Pressure rollers and Dancer rollers. Air line equipment in the clean factories disliking oil mist contamination. Polishing equipment for Lenses and Jewels. Precision actuators of constant output force. ( Spot welder etc.) Actuator for emergency use. 1
3 s c uper ylinder SC Model SCS: Single Action(Push) SPECIFICATIONS Model SCD: Double Action Operating Style Single Action (Push) / Double Action Cylinder Diameter Stroke Single Double Working Fluid Working Pressure Range Working Temperature Range Rod Bearing Mounting Compressed Air (Non-Lubricated) Linear ball bearing without seal, Linear ball bearing with seal on both sides Direct, L, Front Flange, Rear Flange,Trunnion, Pivot-Mounting SC Series is equipped with a linear ball bearing, having the same dimensions and structure as FC Series, to maximize the features of the BF diaphragm. The frictional resistance is smaller than the conventional types. The pressure fluctuation following capability is excellent. Operation is possible even under very small pressure. This series can be used as an ideal actuator for the following control operations: To ensure correct control under low pressure Control of tension of printing machines and plastic production facilities Control of contact pressure of textile processing and metalworking machines Control of pressing force of polishing machines and testers SCD S0 B0 P Cylinder dia. Stroke SCS SCD Model No. Single Action Double Action None S0 S1 B0 B1 Spring In case of FCD None Standard Spring Bearing Linear ball bearing without seal Linear ball bearing with seal on both sides Mount None --- L L F Front Flange R Rear Flange T Trunnion P Pivot 2
4 INTERNAL CONSTRUCTION/PARTS DESCRIPTION SINGLE ACTION TYPE PARTS LIST DESCRIPTION Bonnet F/R O-Ring Piston MATERIAL NBR Alloy Casting A Cylinder/Spacer A Alloy Rod BF Diaphragm Return Spring Bearing Hole Stopper Ring Tie Rod A Alloy Die-Casting A Alloy Casting (FCS-0 & over) Stainless Steel Hard Steel, Hard Chrome Plated (FCS-80 & over) Fabric Reinforced NBR Spring Steel Wire Linear Ball Bearing Steel (SKS) Carbon Steel Note : 1. A parts are anodic treated. 2. Unless otherwise specified, steel parts are galvanized. 3. A die-casting parts are bake painted. DOUBLE ACTION TYPE PARTS LIST DESCRIPTION Bonnet F/R O-Ring Piston BF Diaphragm F Ass'y MATERIAL A Alloy Die-Casting A Alloy Casting (FCS-0 & over) NBR Alloy Casting A Cylinder/Spacer A Alloy Rod Stainless Steel Hard Steel, Hard Chrome Plated (FCS-80 & over) Fabric Reinforced NBR with Fitting Caulked BF Diaphragm Fabric Reinforced NBR Return Spring Spring Steel Wire Bearing Linear Ball Bearing Hole Stopper Ring Steel (SKS) Tie Rod Carbon Steel Note : 1. A parts are anodic treated. 2. Unless otherwise specified, steel parts are galvanized. 3. A die-casting parts are bake painted. 3
5 s c uper ylinder SPECIAL TYPE CYLINDER SCD-40 0 SUPER CYLINDER DOUBLE ACTION TYPE PARTS LIST DESCRIPTION Bonnet F/R O-Ring Piston BF Diaphragm F Ass'y MATERIAL A Alloy Die-Casting A Alloy Casting (FCS-0 & over) NBR Alloy Casting A Cylinder/Spacer A Alloy Rod Stainless Steel Hard Steel, Hard Chrome Plated (FCS-80 & over) Fabric Reinforced NBR with Fitting Caulked BF Diaphragm Fabric Reinforced NBR Return Spring Spring Steel Wire Bearing Linear Ball Bearing Hole Stopper Ring Steel (SKS) Tie Rod Carbon Steel Note : 1. A parts are anodic treated. 2. Unless otherwise specified, steel parts are galvanized. 3. A die-casting parts are bake painted. Fujikura BF Cylinders 4
6 SCS Outline Dimensions OUTLINE DIMENSIONS F0/F1 : Spring force at zero/full stroke (N) Ae : Effective area (mm 2 ) N : Wrench flat width DcSTROKE A B C D E F G H I J K L M N O P Q R S T Ae SPRING FORCE M Rc1/ M 6DP M M 1. 6 Rc 1/8 50 M 6DP M M Rc 1/ M 8DP M M 1.5 Rc 1/4 80 M 8DP M M Rc 1/4 98 MDP M M Rc 3/ MDP M M Rc 3/ MDP M M Rc 3/ M12DP M L Type Mount Ds-STROKE AA AB AC AD AE AF AG AH AI AJ AK Front Flange Type Mount Ds-STROKE BA BB BC BD BE BF BG BH BI
7 s c uper ylinder Rear Flange Type Mount Ds-STROKE BA BB BC BD BE BF BG BJ Trunnion Type Mount Ds-STROKE CA CB CC CD CE CF CG CH Pivot Type Mount Ds-STROKE DA DB DC DD DE DF DG DH DI M M M M M M M M1235 DE : Bearing Size No. 6
8 SCD Outline Dimensions OUTLINE DIMENSIONS DcSTROKE A B C D E F G H I J K L M N O P Q R S T Ae M 81 6 Rc 1/ M 6 DP M M 1. 6 Rc 1/8 50 M 6 DP M M Rc 1/ M 8 DP M M 1.5 Rc 1/4 80 M 8 DP M M Rc 1/4 98 M DP M M Rc 3/ M DP M M Rc 3/ M DP M M Rc 3/ M12 DP M Ae : Effective area (mm 2 ) N : Wrench flat width L Type Mount Ds-STROKE AA AB AC AD AE AF AG AH AI AJ AK Front Flange Type Mount Ds-STROKE BA BB BC BD BE BF BG BH BI
9 s c uper ylinder Rear Flange Type Mount Ds-STROKE BA BB BC BD BE BF BG BJ Trunnion Type Mount Ds-STROKE CA CB CC CD CE CF CG CH Pivot Type Mount Ds-STROKE DA DB DC DD DE DF DG DH DI M M M M M M M M1235 DE : Bearing Size No. 8
10 SCS Outline Dimensions OUTLINE DIMENSIONS F0/F1 : Spring force at zero/full stroke (N) Ae : Effective area (mm 2 ) N : Wrench flat width DcSTROKE A B C D UD E F G H I J K L M N O P Q R S T U V Ae SPRING FORCE M M Rc 1/ M DP M M Rc 1/ M DP M M Rc 3/ M DP F0 F1 L Type Mount DcSTROKE AA AB AC AD AE AF AG AH AI AJ AK M M M Front Flange Type Mount DcSTROKE BA BB BC BD BE BF BG BH BI M M M
11 s c uper ylinder Rear Flange Type Mount DcSTROKE BA BB BC BD BE BF BG BJ M M M Trunnion Type Mount DcSTROKE CA CB CC CD CE CF CG CH Pivot Type Mount DcSTROKE DA DB DC DD DE DF DG DH DI M M M DE : Bearing Size No.
12 SCD Outline Dimensions OUTLINE DIMENSIONS DcSTROKE A B C D UD E F G H I J K L M N O P Q R S T Ae : Effective area (mm 2 ) N : Wrench flat width Ae M M Rc 1/ M DP M M Rc 1/ M DP M M Rc 3/ M DP L Type Mount DcSTROKE AA AB AC AD AE AF AG AH AI AJ AK M M M Front Flange Type Mount DcSTROKE BA BB BC BD BE BF BG BH BI M M M
13 s c uper ylinder Rear Flange Type Mount DcSTROKE BA BBBCBD BE BF BG BJ M M M Trunnion Type Mount DcSTROKE CA CB CC CD CE CF CG CH Pivot Type Mount DcSTROKE DA DB DC DD DE DF DG DH DI M M M DE : Bearing Size No. 12
14 13
15 MEMO Fujikura BF Cylinders
16
Heavy Duty Actuators CONTROLS. Pneumatic Actuators for Quarter-Turn Valves and Dampers Torques to 1,600,000 in. lbs. Double Acting and Spring Return
CONTROLS Division of A-T Controls Heavy Duty Actuators Pneumatic Actuators for Quarter-Turn Valves and Dampers Torques to,600,000 in. lbs. Double Acting and Spring Return THD S E R I E S The Triac line
THD. Series. Heavy Duty Actuators. Pneumatic Actuators for Quarter-Turn Valves and Dampers CONTROLS. Torques to 1,600,000 In-lbs
CONTROLS Division of A-T Controls, Inc. THD Series Heavy Duty Actuators Pneumatic Actuators for Quarter-Turn Valves and Dampers Torques to 1,600,000 In-lbs Double Acting and Spring Return Symmetric and
TM ETRS-TM35FIN-ETRS89 WTG
Noise calculation model: ISO 9613-2 General Wind speed: 8,0 m/s Ground attenuation: General, Ground factor: 0,4 Meteorological coefficient, C0: 0,0 db Type of demand in calculation: 1: WTG noise is compared
S: With magnet. Bore x stroke (basic type) Cushion P: pneumatic adjustable
series MK Standard cylinders according to ISO 15552 How to order? M K A P S 50 x 100 M: Marani A: Double acting S: With magnet Bore x stroke (basic type) K: According to ISO 15552, Mickey-mouse type Cushion
KNOCK CYLINDERS CONTENTS ACTUATORS GENERAL CATALOG. Caution KNOCK CYLINDERS
CAD drawing data catalog is available. ACTUATORS GENERAL CATALOG CONTENTS Features/Introductions of Variations 79 Double Acting Type Specifications 81 Order s 82 Inner Construction and Major Parts 83 Dimensions
The friction free alternative
Rolling The Rolling Diaphragm Air Cylinder The advent of the long stroke rolling diaphragm as a means of low-friction dynamic sealing has led to the development of the ControlAir Diaphragm Air Cylinder.
Vacuum Automation 2.1. The future depends on good product choices
Vacuum Automation 2.1 The future depends on good product choices Combined pump and gripper 432 433 Combined pump and gripper Introduction...434 Small...436 Medium...438 Large...452 Accessories...455 434
PRIME 3-BURNER PROPANE BARBECUE Assembly Manual
PRIME 3-BURNER PROPANE BARBECUE Assembly Manual 85-3135-0 / G32010 1 Year limited Warranty Read and save manual for future reference. Assemble your grill immediately. Missing or damaged parts claims must
AUTUMN 2013 TIME SCHEDULE
AUTUMN 2013 TIME SCHEDULE Instructor 110 A LC 3 M W F 830-920 195 L EEB 105 CRAIG 11903 11904 AA QZ T 930-1020 25 L MUS 219 11905 # AB QZ T 1030-1120 25 L DEN 213 11906 AC QZ T 1230-120 25 L SMI 107 11907
Air Cylinders. Fine Quality. Precision Engineered. Advanced Design. Excellent Prices S T C. Tel:
Air Cylinders Precision Engineered Fine Quality Excellent Prices Advanced Design connects fluid power to industrial automation Tel: 650-856 8833 www.stcvalve.com H1 83 Contents Air Cylinder Numbering System
The Product Range. Technical Data
The Product Range Section 3.1 - Basic Cylinder Bore sizes (mm): 10, 16, 25, 32, 40, 50 The basic cylinder series satisfies the support and guidance requirements of a great diversity of applications. Various
PRIME 3-BURNER PROPANE BARBECUE Assembly Manual
PRIME -BURNER PROPANE RBECUE Assembly Manual 85-15-0 / G2012 1 YEAR LIMITED WARRANTY READ AND SAVE MANUAL FOR FUTURE REFERENCE. Assemble your grill immediately. Missing or damaged parts claims must be
Combined pump and gripper Medium
VGS 3010 H D W Dimension and connection W D H Feed pressure Vacuum Exhaust/blow mm mm mm 1 Housing VGS3010 23 30 Ø6 mm, 3x G1/8", M5 2 COAX cartridge 2:1 No COAX cartridge 65 2:2 COAX cartridge 2-stage
SELECT 3-BURNER PROPANE BARBECUE Assembly Manual
SELECT 3-BURNER PROPANE BARBECUE Assembly Manual 85-3096-2 (G31221) Propane 1 Year limited Warranty Read and save manual for future reference. Assemble your grill immediately. Missing or damaged parts
DATE: May 19, 2000 Service Instruction No. 1443E (Supersedes Service Instruction No. 1443D) Engineering Aspects are FAA Approved
DATE: May 19, 2000 (Supersedes Service Instruction No. 1443D) Engineering Aspects are FAA Approved SUBJECT: MODELS AFFECTED: TIME OF COMPLIANCE: Approved Slick Magnetos on Textron Lycoming Engines See
SITRANS P measuring instruments for pressure
Overview Siemens AG 009 Supplementary electronics for 4-wire connection Design Dimensions (W x H x D) in mm (inch) Electrical connection 80 x 10 x 60 (3.15 x 4.7 x.36) Screw terminals (Pg 13.5 cable inlet)
There are many pre-designs of Vulkan launcher.
There are many pre-designs of Vulkan launcher. This is next one: age A(x8) - h=45 m, d=3,9 m age B - h=57 m, d=7,75 m age C - h=27 m, d=6,7 m escape syem - h=3,8 m, d=1,1 m Model 2 H ~920 mm Paper used:
Industrial Controls. 8WN Signaling Columns.
s Industrial Controls 8WN Signaling Columns www.siemens.co.in 8WN signaling columns 8WN44 Signaling columns, 70mm diameter, modular Selection and ordering data Buzzer elements Version Rated voltage Color
REV: 000. Super Seca Flash Cure Units
REV: 000 Super Seca Flash Cure Units Table Of Contents Introduction 2 Standard Operating Guide 2 Features & Specs 2 External Layout 4-15 Internal Layout 16-24 Plug Guide 25 Wiring Diagrams 26-28 F.A.Q.
There are many pre-designs of Vulkan launcher.
There are many pre-designs of Vulkan launcher. This is next one: ge A(x8) - h=45 m, d=3,9 m ge B - h=57 m, d=7,75 m ge C - h=27 m, d=7,75 m escape syem - h=3,8 m, d=1,1 m Model 1 H ~920 mm Paper used:
VACUUM PRESSURE PUMPS INSTALLATION CAUTIONS AND INFORMATION READ AND FOLLOW CAREFULLY!
F.A.A.-P.M.A. MODEL 1U128A AND 1U128B REVISION 17 February 21, 2002 VACUUM PRESSURE PUMPS INSTALLATION CAUTIONS AND INFORMATION READ AND FOLLOW CAREFULLY! The following information applies to all installations
CUSTOM ADD-ONS FOR ENGLISH UNITS
Spindles Flange Piloted Slot Collet Jacobs Taper Morse Taper See note on next page for location in the Specification Code No. Description A B C AA Flange 2.625 3.619/3.621 5.313 AB Piloted Slot 2.3125
Process connection. Further designs. Order code. to EN
Replacement measuring cell for pressure for SITRANS P, DS III, DS III PA and DS III FF series 7 M F 4 9 9 0-7 7 7 7 0-0 D C 0 0.01... 1 bar g (0.15... 14.5 psi g) B 0.04... 4 bar g (0.6... 58 psi g) C
Guide blocks for ISO/VDMA cylinders
Actuators Guide blocks or ISO/VDMA cylinders QA/8/51/ QA/8/61/ QA/8/81/ (long coupling) QA/8/85/ (short coupling) Ø 32 to 1 mm QA/8/61/ QA/8/51/ Conorms to ISO 6431, VDMA 24562 and NFE 49 3 1 Ensures protection
SELECT 4-BURNER PROPANE BARBECUE Assembly Manual
SELECT 4-BURNER PROPANE RBECUE Assembly Manual 85-3064-8 (G43257) Propane 1 Year limited Warranty Read and save manual for future reference. Assemble your grill immediately. Missing or damaged parts claims
SITRANS F flowmeters. SITRANS F O delta p - Primary differential pressure devices. Orifice plate with annular chambers. 4/358 Siemens FI
Application Dimensional drawings Suitable for non-corrosive and corrosive gases, vapors and liquids; permissible operating temperature -60 to +550 C. Design Two support rings with replaceable orifice disk
Series 83. Stainless Steel Mini Cylinder
Stainless Steel Mini Cylinder Magnet included in 7/8 and 1-1/4 bore only in double acting cylinder THEORETICAL CYLINDER FORCE (LBS). Operating Pressures (PSI) Size Action 25 50 75 100 125 150 3/4" Out
AS/ASH SERIES ALUMINUM PNEUMATIC AND HYDRAULIC CYLINDERS... 6
AS/ASH SERIES ALUMINUM PNEUMATIC AND HYDRAULIC CYLINDERS............. 6 Section 6 8 ORDERING INFORMATION For Rod End Dimensions see back cover foldout... Basic Cylinder No Mount.0" to 4.00" For pressure
Type 520C 85 C Long Life, Inverter Grade, Aluminum High Ripple, Long Life Screw Terminal Type
click here to see hardware and mounting options Type 520C 85 C Long Life, Inverter Grade, Aluminum Type 520C is the 85 C version of the Type 550C Inverter-Grade capacitor. It delivers the ripple-current
Type 550C 105 C High Ripple, Inverter Grade, Aluminum Ultra-Ripple, Long Life Screw Terminal Type
click here to see hardware and mounting options Specifications Temperature Range 4 C to +5 C Rated Voltage Range 2 Vdc to 5 Vdc Capacitance Range 68 µf to 35, µf Capacitance Tolerance % +5% Type 55C is
Heavy-Duty Pneumatic Actuator. IS & IC Series
Heavy-Duty Pneumatic Actuator BS EN ISO 9001:2000 INTRODUCTION Heavy-Duty Pneumatic Actuator - The IS & IC series of Heavy Duty scotch yoke actuators are designed to suit a wide range of valves and damper
Rodless cylinders. Standard magnetic version. High reliability and long lifetime. Low friction and good resistance to loads
Rodless cylinders Standard magnetic version High reliability and long lifetime Low friction and good resistance to loads Installation in any position Mounting elements and switches can be ordered separately
Application. Additional Features. Description. Features
1199 Series Packaged Valve and Motor Assemblies Bulletin 1199 January 2010 Direct coupled / packaged assembly no linkage to adjust. Easy setup. Accurate, consistent response. Wide selection of valve types
APPENDIX A Instruction Set. Op Code. T states Flags Main Effects. Instructions
APPENDIX A 8085 Instruction Set Instructions ACI byte CE 7 ALL A A + CY + byte ADC A 8F 4 ALL A A + A + CY ADC B 88 4 ALL A A + B + CY ADC C 89 4 ALL A A + C + CY ADC D 8A 4 ALL A A + D + CY ADC E 8B 4
Overhaul and repair procedures for the following Standard Cast Cylinder Stud Assemblies and Cylinder Valve Assemblies:
Technical Aspects are FAA Approved Number: L00-13 C Replace L00-13 B Date: 04/29/2005 Subject: Overhaul and repair procedures for the following Standard Cast Cylinder Stud Assemblies and Cylinder Valve
Partner for Change : Appendix A
11/8/217 Partner for Change - 218: Appendix A Practice Greenhealth Awards Probo.CI CEC_HOSPITAL no.35321 Partner for Change - 218: Appendix A Introduction Completion of Appendix A mandatory. Please indicate
ELITE 2-BURNER PROPANE BARBECUE Assembly Manual
ELITE 2-BURNER PROPANE BARBECUE Assembly Manual 85-3136-8 (G36402) Propane 1 Year limited Warranty Read and save manual for future reference. Assemble your grill immediately. Missing or damaged parts claims
Installation, Maintenance & Parts Manual
Installation, Maintenance & Parts Manual Flat Belt Center Drive LPZ Conveyors Table of Contents Warnings General Safety........................... 2 Introduction.......................................
Standard Cylinders DNC Inch Series, to ISO 15552
Standard Cylinders DNC Inch Series, to ISO 5552 DNC Standard Cylinders meet ISO 5552 mounting, rod, bore and thread dimension specifications for easy interchangeability. Piston ¼ to 2½ Strokes of up to
SPARE CONNECTORS 2008
SPARE PARTS MANUAL ART.NO.: 3208201 ENGLISH INDEX SPARE CONNECTORS AA-AR SPARE CONNECTORS AS-BK SPARE CONNECTORS BL-BZ SPARE CONNECTORS CA-CP 1x 2x 3x 4x SPARE CONNECTORS CQ-DM SPARE CONNECTORS DN-EL
Flat Belt Center Drive LPZ Conveyors
Flat Belt Center Drive LPZ Conveyors Installation, Maintenance & Parts Manual DORNER MFG. CORP. INSIDE THE USA OUTSIDE THE USA P.O. Box 20 975 Cottonwood Ave. TEL: 1-800-397-8664 TEL: 262-367-7600 Hartland,
STC Air Cylinders. Fine Quality. Precision Engineered. Advanced Design. Excellent Prices. Air Cylinders
Catalog: PUB 06 CYL STC Advanced Design Precision Engineered Fine Quality Excellent Prices connects fluid power to industrial automation F1 Table of Contents STC Air Cylinder Numbering System............F2
Tie rods cylinders to ISO standard Ø
Tie rods cylinders to ISO 5552 standard 25 DESCRIPTION Cylinders series "XL" comply with ISO 5552 standard, being in this way completely interchangeable with the former cylinders to ISO 643 /VDMA 24562
Discharge oil capacity cm Discharge oil capacity. Max. stroke volume on retraction Remarks.
2 High Power Systems High Power Systems 3 Working pneumatic pressure range MPa 0.2 to 0.2 to 0.7 0.2 to 0.7 0.2 to 0.7 0.2 to 0.7 Boosting ratio Theoretical output oil pressure at max. working pneumatic
European Aviation Safety Agency
European Aviation Safety Agency EASA TYPE-CERTIFICATE DATA SHEET Number: IM.E.032 Issue: 01 Date: 27 September 2012 Type: Lycoming Engines Models IO-360-A1A IO-360-C1B AEIO-360-A1E6 HIO-360-F1AD IO-360-A1B
LYCOMING CYLINDER PRICING
SHIPPING: 2415 EMBARCADERO WAY, PALO ALTO, CA 94303 MAILING: P.O. BOX 50608, PALO ALTO, CA. 94303-0608 Phone: 650-354-1399 Fax: 650-354-1395 LYCOMING CYLINDER PRICING CYLINDER PRICING ENGINE MODEL: O-235
Directional Seat Valve Series D4S (Denison)
Characteristics Seat valves series D4S are designed for directional control functions. A large variety of poppets, springs and covers - including shuttle valves, stroke limiters, solenoid valves (VV01)
Relays & Volume Boosters
Relays & Volume Boosters Type 20 Type 20 HR Type 20 X HR Relays / Volume Boosters Type 72 Type 72 HR Type 75 Type 75 HR Type 79 Type 79 HR www.marshbellofram.com 800.727.5646 37 Relays - Volume Boosters
Transmission in Limp Home Mode (S- B-27.00/102b, December 16, 2008)
Transmission in Limp Home Mode (S- B-27.00/102b, December 16, 2008) Topic number Version 1 Function group LI27.00-P-045638 27.00 General Date 01-19-2009 Validity Reason for change All Models Equipped with
Air-oil Systems. Air-oil Systems
2 3 r r r ff ff ff 4 5 6 7 8 9 Socket type No. of cores Finished cord OD Conductor sectional area 2 cores f6.6mm 0.75mm 2 DIN socket (equivalent to 3 cores f7mm AWG6 to 20) Socket type Cable OD Conductor
SSR SSR SSR SSR
DMX 52 Page DMX52 decoder firing board module 20 VAC reference Input 2 3 4 The Thyristor Firing board is compatible withdmx52 control standard 4 DMX52 triggers 2 3 4 - +- +- +- + The can trigger control
MOONEY INTERNATIONAL CORPORATION The Symbol of Performancet MOONEY SPECIAL LETTER Date:
MOONEY INTERNATIONAL CORPORATION The Symbol of Performancet MOONEY SPECIAL LETTER 15-24 Date: 11-19-2015 SUBJECT: MODELS/ S/N AFFECTED: To ADVISE MOONEY OWNERS/OPERATORS of the LYCOMING Service Instruction
G3 UNIVERSAL GRIP CONFIGURATION GUIDE
G3 UNIVERSAL GRIP CONFIGURATION GUIDE www.ottoexcellence.com Industrial Grips for Demanding Applications OTTO serves agriculture, construction, off-highway, material handling and specialized industrial
SITRANS F flowmeters. SITRANS F O delta p - Primary differential pressure devices Metering pipe with orifice plate and annular chambers 4/369
and annular chambers Application Suitable for non-corrosive and corrosive gases, vapors and liquids; permissible operating temperature -10 to +00 C. Design Orifice plate with annular chambers consisting
MULTIMOUNT CYLINDERS FOR VACUUM PADS
MULTIMOUNT CYLINDERS FOR VACUUM DS These devices preserve the multimount cylinder design concept while employing a hollow rod structure to keep total length very short. Furthermore, all the piping is concentrated
aluminum guide carriage cover with wiper and grease nipple roller hardened steel rail Example: PS 25/35 width of guide rail (35 mm)
Technical Data Versions for pneumatic linear drive: Series OSP-P aluminum guide carriage Roller Guide Powerslide Loads, Forces and Moments aluminum clamping rail hardened steel rail roller cover with wiper
QA/8000. Guide blocks with plain bearings/ roller bearings Ø 32 to 100 mm
Guide blocks with plain bearings/ roller bearings Ø 3 to mm Conorms to ISO 643, VDMA 46 and NFE 49 3 Ensures protection against external rotary and bending orces Guide rods run through bearings protected
SERVICE INSTRUCTION. 652 Oliver Street Williamsport, PA U.S.A. Tel Fax
652 Oliver Street Williamsport, PA. 17701 U.S.A. Tel. 570 323 6181 Fax. 570 327 7101 www.lycoming.com SERVICE INSTRUCTION DATE: March 8, 2012 Service Instruction No. 1098H (Supersedes Service Instruction
Active and Passive Brakes Series OSP-P
Active and Passive Brakes Series OSP-P Contents Description Page Overview 51-52 Standard cylinder with Active brake 53-56 Plain bearing SLIDELINE with Active brake 33-34 Aluminium roller guide PROLINE
Installation, Maintenance & Parts Manual
Installation, Maintenance & Parts Manual 00 Series Center Drive Conveyors Table of Contents Warnings General Safety........................... Introduction....................................... Product
Issue/Rev. 0.3 (2/04) Bulletin P
Form No. P0906.03 E-Type Transmitter Parts List Issue/Rev. 0.3 (2/04) Bulletin P0906.03 (Previous Design) Switch and Network Assembly The Switch and Network Assembly is no longer available. To replace
AN RPM to TACH Counts Conversion. 1 Preface. 2 Audience. 3 Overview. 4 References
AN 17.4 RPM to TACH Counts Conversion 1 Preface 2 Audience 3 Overview 4 References This application note provides look up tables for the calculation of RPM to TACH Counts for use with the EMC2103, EMC2104,
7. Are you upgrading a complete engine from a TCM/ Bendix to a Slick system? If yes, purchase a complete Slick Ignition Upgrade Kit.
1.1 PRODUCT APPLICATION INFORMATION WORKSEET The following information will aid you in selecting the correct magneto, upgrade kit, or ignition harness: 1. Engine Manufacturer 2. Engine Model Number 3.
Push Button Units and Indicator Lights
3SB3, Inscriptions, 22 mm Insert labels Push Button Units and Indicator Lights Push buttons (clear) and illuminated push buttons with a flat button can be fitted with insert labels for identification purposes,
SERVICE INSTRUCTION. All Certified Lycoming direct drive engines. TIME OF COMPLIANCE: At owner s discretion.
652 Oliver Street Williamsport, PA. 17701 U.S.A. Telephone +1 (800) 258-3279 U.S. and Canada (Toll Free) Telephone +1 (570) 323-6181 (Direct) Facsimile +1 (570) 327-7101 Email Technicalsupport@lycoming.com
INSTRUMENT PANEL CLUSTERS
INSTRUMENT PANEL CLUSTERS NOT BUYING AT THIS TIME REVISED ##### PART # MAKE APPLICATION 6/18/2018 PRICE 56045618 CHRY IPC 40.00 56045679 CHRY IPC 40.00 56051103 CHRY IPC 40.00 56049833 AC,AD CHRY IPC 40.00
Milroyal C. PD 3661 Effective 6/2009. MilRoyal C
Milroyal C Milroyal C Pumps Milroyal C DUPLEX with HPD Liquid End GENERAL SPECIFICATIONS Drive Polar crank design all moving parts sub merged in oil. Front end scavenging The plunger always set to top
Installation, Maintenance & Parts Manual
Installation, Maintenance & Parts Manual 2100 Series Center Drive Conveyors Table of Contents Warnings General Safety........................... 2 Introduction....................................... 2
2200 Series Center Drive Conveyors
2200 Series Center Drive Conveyors Installation, Maintenance & Parts Manual DORNER MFG. CORP. INSIDE THE USA OUTSIDE THE USA P.O. Box 20 975 Cottonwood Ave. TEL: 1-800-397-8664 TEL: 262-367-7600 Hartland,
1.56 L INEAR A CTUATORS: AIR C YLINDERS S ERIES CA1
1.56 L INEAR A CTUATORS: AIR C YLINDERS A IR C YLINDER Auto switch sensing optional s Ø4, 5, 63, 8, 1 Non-rotating piston rod & double rod types available Ultra low friction, maximum 5% Long life, high
Direct solenoid and solenoid pilot operated valves
Direct solenoid and solenoid pilot operated valves Individual mounting Series Inline Sub-base non plug-in 4 6 Air return Manual operator Solenoid 4-way pilot with balanced poppet Bonded spool 2 7 8 2 67
FAST Program 2013 Festo Assured Shipping Time
FAST Program 203 Festo Assured Shipping Time TM A complete line of automation components available when you need them! FAST TM Program 203 Festo Assured Shipping Time A complete line of automation components
MAC VALVES, INC. Rev. T
REVISION LEVEL DATE RELEASED CHANGE DESCRIPTION ECN NUMBER P.E. APPROVAL P.D APPROVAL A 5-11-95 ENGINEERING RELEASE 12727 EPJ B 1-15-96 ADDED 35 SERIES 13228 EPJ ADDED MOD 2938 TO 6500 SERIES, MODS 2910
Rodless cylinders. Series General. Construction characteristics. Technical characteristics. Use and maintenance
Series 1600 Rodless cylinders General The purpose of producing a rodless cylinder is to provide a space saving option over conventional cylinders. On a traditional rod type cylinder, the total space occupied
Autumn Quarter 1999 Class Time Schedule and Teaching Assignments 7/10/99 8:48 PM
120 A LC 5 M T W F 930-1020 288 L BAG 131 MACKLIN AA LB M 1230-220 32 L BAG 133 Liang/Bondzie AB LB M 230-420 32 L BAG 133 Anderson/Lockwood AC LB M 430-620 32 L BAG 133 Lincoln/Babic AD LB T 1230-220
FA SERIES KNIFE GATE PNEUMATIC CYLINDERS... 8
FA SERIES KNIFE GATE PNEUMATIC CYLINDERS......... 8 section 8 154 ORDERING INFORMATION For Rod End Dimensions see back cover foldout... Dimensional Information FA SERIES DIMENSIONS BASIC DIMENSIONS PLUS
Type 500X. Electropneumatic Transducer (I/P, E/P) Installation, Operation and Maintenance Instructions. Ordering Information.
Type 500X Electropneumatic Transducer (I/P, E/P) Installation, Operation and Maintenance Instructions Ordering Information Type 500X I/P Transducers Output Range Part Number Input psi kpa Impedance 500-AA
Keystone F89 pneumatic quarter-turn actuator General purpose / hazardous area
Compact, reliable and low operation costs for all types of quarter-turn valves are the keywords of the Keystone F89 range of pneumatic actuators Features Direct mounting to all Keystone butterfly valves
KEYSTONE F89 pneumatic quarter-turn actuator GENERAL PURPOSE / HAZARDOUS AREA
compact, reliable and low operation costs for all types of quarter-turn valves are the keywords of the Keystone F89 range of pneumatic actuators FEATURES Direct mounting to all Keystone butterfly valves
Short-stroke cylinders ADVC/AEVC
Short-stroke cylinders ADVC/AEVC q/w Worldwide: Superb: Easy: Festo core product range Covers 80% of your automation tasks Always in stock Festo quality at an attractive price Reduces procurement and storing
P-920, Revision 32 Page 2 of 13
DEPARTMENT OF TRANSPORTATION P-920 FEDERAL AVIATION ADMINISTRATION Revision 32 Hartzell HC-C2Y, BHC-C2Y, CHC-C2Y, DHC-C2Y TYPE CERTIFICATE DATA SHEET NO. P-920 March 9, 2010 Propellers of models described
PNEUMATIC GROUP Brakes ORIGA SYSTEM PLUS
PNEUMATIC GROUP Brakes ORIGA SYSTEM PLUS HOLDING DEVICES AND BRAKES FOR OSP-P 35 OSP ORIGA SYSTEM PLUS Holding Devices and Brakes Holding Device for pneumatic linear drive Series OSP-P Piston diameters
PRA/182000, PRA/182000/M
Profile barrel with concealed tie rods Pneumatic Profile Cylinders ISO 6431, VDMA 24562 and NFE 49-003-1 Non-magnetic and Magnetic Piston Double Acting Ø 32 to 125 mm M/50 Switches can be mounted flush
Features. How to Order ACS3. Max. Temperature Without bellows J Nylon Tarpaulin 60 K Neoprene Cloth 110. Material ACM ACMW. 7 Rod end attachment
Symbol -N B80-S100 Features With built-in magnet. (Standard) With non-lubricated seal. Improved cushion ring and special seal increase the absorbable kinetic energy. Cushion needle avoid detachment. Double
CLOGGING INDICATORS SUMMING-UP DESCRIPTION
SUMMINGUP CLOGGING PRESSURE FILTERS Pressure gauges Pressure switches Differential, visual Differential, electrical Differential, el. + LED Differential, el. + thermostat Differential, el. + visual Differential,
Parts List, Wiring Diagrams
Parts List, Wiring Diagrams PAS180-300 SERIES PACKAGE GAS ELECTRIC UNITS TABLE OF CONTENTS PARTS LIST----------- 2-16 PARTS DRAWING - - - - - 17-28 WIRING DIAGRAMS - - - 29-52 Printed in U.S.A. 5/22/08
Pneumatic Spring Diaphragm Actuators
Pneumatic Spring Diaphragm Actuators DD/DR-Series Direct Action (DA-series) / Reverse Action(RA-series) Best Flow Solutions FEATURES bfs Model DD-series direct-acting and DR-series reveres-action pneumatic
Type E-10, E-11 Hazardous Area Explosion-proof Transmitters
Electronic Pressure Catalog > Hazardous Area > E-10, E-11 Type E-10, E-11 Hazardous Area Explosion-proof Transmitters Meets ANSI / ISA 12.27.01-2003 single seal requirements - no dual seal required Applications
Position Control Hard chrome-plated carbon steel piston rod with blackened threads and wrench flats Sintered bronze rod bushing Internally lubricated
Position Control System Products Cylinders 7.3-7.9 Cylinder Rod Lock 7.10-7.11 Cylinder Accessories 7.12-7.15 Pneu-Turn 7.16-7.24 Position Control System 7.25-7.36 Digital Panel Meter 7.37-7.42 Electronic
Limit Switches and Safety
and Safety Introduction Overview 3SE5 23., 3SE5 21. 3SF1 2.4 3SE5 24., 3SF1 244 3SE5 13., 3SE5 11., 3SF1 114 3SE5 12., 3SF1 124 3SE5 16. 3SE5 232, 3SE5 212, 3SF1 2.4 3SE5 132, 3SE5 112, 3SF1 1.4 Position
Features. when stopping. Various mounting styles. Rod type. Bore size (Heavy Duty) (Standard)
Features Symbol Standard tie rod type hydraulic cylinder Double acting hydraulic cylinder for 70 kgf/cm 2 or 140kgf/cm 2 with bore sizes from 40 to 250. High performance cushion to reduce shock Double
Mini Rotary Actuator/Rack & Pinion Style
Mini Rotary Actuator/Rack & Pinion Style Series CRJ :, CRB2 CRBU2 CRB MSU CRJ CRA CRQ2 MSQ MSZ CRQ2X MSQX MRQ PAT. PEND D- 79 Mini Rotary Actuator Series CRJ Rack & Pinion Style/:, Compact 9.5 23.5 43(54)
2. COMPACT CYLINDERS series STRONG (RS, RQ)
2. COMPACT CYLINDERS series STRONG (RS, RQ) A new series of compact cylinders for long s and heavy-duty applications standard supplied with oversized guides and rods, the first one with adjustable pneumatic
RAISEBORING DRILL PIPES
Secoroc Rock Drilling Tools RAISEBORING DRILL PIPES Catalogue Introducing Raiseboring drill string components Atlas Copco Secoroc has a long history in Raiseboring that finds its roots in the Robbins Raiseboring
6-3 [D5A0] WIRING DIAGRAM. 5. Wiring Diagram. 5. Wiring Diagram A: POWER SUPPLY ROUTING SU01-04A
![6-3 [D5A0] WIRING DIAGRAM. 5. Wiring Diagram. 5. Wiring Diagram A: POWER SUPPLY ROUTING SU01-04A](/thumbs/95/126021946.jpg "6-3 [D5A0] WIRING DIAGRAM. 5. Wiring Diagram. 5. Wiring Diagram A: POWER SUPPLY ROUTING SU01-04A")
6-3 [D5A0] WIRING DIAGRAM A: POWER SUPPLY ROUTING SU01-04A 12 WIRING DIAGRAM [D5A0] 6-3 SU01-04B 13 6-3 [D5A0] WIRING DIAGRAM No. Load No. Load MB-1 MB-2 MB-3 MB-4 MB-5 MB-6 MB-7 MB-8 MB-9 MB-10 SBF-7
Vehicle Technical Specifications
Vehicle Manufacturer: Year and Model: Dodge (2003-2007) Viper Competition Coupe This specifications form was developed by SCCA Pro Racing and will be used by the TECHNICAL MANAGER to establish technical
Flat SquareFlat Flat SquareFlat FO2, FO3, FO4(multiple power)
Flat Cylinders Flat-1 2.3-2.11 SquareFlat-1 2.12-2.18 Flat-11 2.19-2.23 SquareFlat-11 2.24-2.28 FO2, FO3, FO4(multiple power) 2.29-2.34 FOP(multiple position) 2.35-2.41 Flat Accessories 2.42-2.43 EF1 Cylinders
W22 NEMA Brake Motors - NEMA Premium
101 www.pamensky.com TEFC Standard Features Motors are compliant with DOE and NRCAN Three-phase, 2, 4, 6 and 8 pole, 60Hz Voltage: 208-230/460V, 575V Brake power supply: 220/230/240/460/575V Totally Enclosed
Set-up, Operation & Maintenance Manual
Set-up, Operation & Maintenance Manual 2100 Series Center Drive Conveyors Table of Contents Warnings General Safety.................... 2 Introduction................................ 2 Product Description..........................
Miniature Valves MH1. Extremely small, fast and versatile. Info 206
Miniature Valves MH1 Extremely small, fast and versatile Info 206 MH1 Miniature Valves Benefits and Applications of the MH1 Miniature Valve The MH1 offers maximum reliability, even in constant operation