SITRANS F flowmeters. SITRANS F O delta p - Primary differential pressure devices. Orifice plate with annular chambers. 4/358 Siemens FI

Save this PDF as:
 WORD  PNG  TXT  JPG

Size: px
Start display at page:

Download "SITRANS F flowmeters. SITRANS F O delta p - Primary differential pressure devices. Orifice plate with annular chambers. 4/358 Siemens FI"

Transcription

1 Application Dimensional drawings Suitable for non-corrosive and corrosive gases, vapors and liquids; permissible operating temperature -60 to +550 C. Design Two support rings with replaceable orifice disk form A, B or D (see types of primary differential pressure devices in "Technical description", "Function"); see Ordering data for materials. Graphite gasket with noncorrosive metal foil insert between orifice disk and support ring outlet Overall length 65 mm to DIN Nominal diameters EN: DN 50 to DN 1000 ASME: 2 inch to 0 inch Nominal pressure EN: PN 6 to PN 100 ASME: class 150 to 600 Sealing face to the mating flanges Plane, sealing face turned, N10/N12 to DIN ISO 1302, for soft gasket (PN 6 to PN 0) Plane, sealing face turned, N8 to DIN ISO 1302, f or grooved gasket to DIN 2697 (PN 63 to PN 100) Plane, RF (raised faced) for version to ASME Tapping sockets For the dimensions of the following tapping sockets (see page /351): With connection thread G½ DIN ISO 228/1, connection dimensions to DIN form V With threaded connection ½-1 NPT male, for version to ASME with ferrule for pipe Ø 12 mm, S series with welding connection Ø 21.3 mm See "Technical description" and "Function" for position of the tapping sockets. Orifice plate with annular chamber (left); tapping socket with threaded connection, dimensions in mm Tapping socket: Socket length is fixed in accordance with the pressure and nominal diameter (DIN , Part 2). - Threaded connections of tapping sockets for liquids and gases up to PN 160, for steam up to PN 100, dimensions in mm Versions for steam lines: See "Technical description", "Function" for position of the tapping sockets. /358 Siemens FI

2 SITRANS F flowmeters Nominal diameter acc. to EN DN Inside diameter External diameter d / sealing face: plane, with recess or with groove. PN 6 PN 10 PN 16 PN 25 PN 0 PN 63 PN Orifice plates with annular chambers for installation between EN flanges to EN , dimensions in mm and weights DN L E Weight (approx. in kg) PN 6 PN PN 25 PN 0 PN PN 100 PN 6... PN 100 With smallest nominal pressure With largest nominal pressure ±0.2 2, ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± Orifice plates with annular chambers for installation between EN flanges to EN , dimensions in mm and weights (contd.) Siemens FI /359

3 Nominal diameter acc. to ASME Nominal diameter External diameter d / sealing face: Plane, RF (raised faced) Class 150 Class 300 Class 600 Class 150 Class 300 Class 600 Class L E Weight (approx. in kg) Orifice plates with annular chambers for installation between ASME flanges to ASME B16.5, dimensions in mm and weights With smallest nominal pressure 2 inch ± ½ inch ± inch ± inch ± inch ± inch ± inch ± inch ± inch ± inch ± inch ± inch ± inch ± With largest nominal pressure /360 Siemens FI

4 SITRANS F flowmeters 7 M E Z 7 M E Z for mounting between flanges Sealing faces to the mating flanges: plane. Nominal diameter acc. to EN DN DN DN DN 100 and PN 0 3 DN 125 and PN 0 3 DN 150 and PN 0 3 DN 200 PN 0 3 DN 250 PN 0 3 DN 300 PN 0 3 1GA 1GE 1GF 1GG 1HA 1HE 1HF 1HG 1JA 1JE 1JF 1JG 2AA 2AC 2AE 2AF 2AG 2BA 2BC 2BE 2BF 2BG 2CA 2CC 2CE 2CF 2CG 2EA 2EC 2ED 2EE 2EF 2EG 2FA 2FB 2FC 2FD 2FE 2FF 2FG 2GA 2GB 2GC 2GD 2GE 2GF 2GG DN 350 PN 0 3 DN 00 PN 0 3 DN 500 PN 0 DN 600 DN 700 DN 800 DN 900 DN 1000 Nominal diameter acc. to ASME 2 inch 2½ inch 3 inch inch 2HA 2HB 2HC 2HD 2HE 2HF 2HG 2JA 2JB 2JC 2JD 2JE 2JF 2KA 2KB 2KC 2KD 2KE 3AA 3AB 3AC 3AD 3BA 3BB 3BC 3BD 3CA 3CB 3CC 3CD 3DA 3DB 3DC 3DD 3EA 3EB 3EC 3ED 5GA 5GB 5GC 5HA 5HB 5HC 5JA 5JB 5JC 6AA 6AB Siemens FI /361

5 7 M E Z 7 M E Z 5 inch 6 inch 8 inch 10 inch 12 inch 1 inch 16 inch 20 inch 2 inch for non-corrosive media Support rings made of P250GH, Mat.No or P265GH, Mat.No ; Tappet sockets made of P235G1TH, Mat.No ; orifice disk made of X 6 CrNiMoTi , Mat.No ; permissible operating temperature 10 up to +50 C, for tapping socket with ferrule for pipe, 12 mm, S series, max. 200 C 6AC 6BA 6BB 6BC 6CA 6CB 6CC 6EA 6EB 6EC 6FA 6FB 6FC 6GA 6GB 6GC 6HA 6HB 6HC 6JA 6JB 6JC 6KA 6KB 6KC 7AA 7AB 7AC 1 2 Tapping sockets With threaded connection G½; for liquids and gases PN 160, for steam PN Opposite one another, straight 1 A 1 B - Arranged on one side, 1 C for horizontal pipelines With threaded connection ½-1 NPT male - Opposite one another, straight 1 Q 1 R - Arranged on one side, 1 S for horizontal pipelines With ferrule for pipe Ø 12 mm, S series - Opposite one another, straight 1 J 1 K - Arranged on one side, 1 L for horizontal pipelines With welding connection 21.3 mm; for liquids and gases PN 100 to PN 00 for steam PN Opposite one another, straight 1 D 1 E - Arranged on one side, 1 F for horizontal pipelines Shape of orifice disk aperture (see figure "Shapes of orifice disk aperture") For flow in one direction - Orifice plate form A A - Quarter-circle nozzle form B B For flow in both directions - Cylindrical orifice plate form D D Manufactured according to pressure equipment directive (see "Questionnaire" (page /356)) Without² ) 0 According to Article 3, 1 Paragraph 3 According to category 1 2 According to category 2 3 According to category 3 For corrosive media Support rings, tapping socket and orifice disk made of X 6 CrNiMoTi , Mat.No ; permissible temperature 60 to +550 C, for tapping socket with ferrule for pipe, 12 mm, S series, max. 00 C 1 /362 Siemens FI

6 SITRANS F flowmeters 7 M E Z Further designs Order code 1) Add "-Z" to and specify Order code(s) and plain text. Calculation of orifice disk A11 aperture Enclose a calculation sheet "Questionnaire for calculation of a primary differential pressure device according to DIN EN ISO 5167" with the order! Orifice plate without calculation Y01 Specify in plain text: Diameter of orifice disk aperture d =... mm Internal diameter of pipe D =... mm Radius of quarter-circle nozzle r =... mm Material certificate C01 Acceptance test certificate to EN Orifice plate degreased A12 for oxygen measurements Note: Cleaned and foil-packed. When using, note that the orifice plate must be completely degreased when fitted in the pipeline. Orifice disk including gasket On request Other materials On request Additional nominal diameters On request and nominal pressure stages according to EN and ASME Cold water pressure test On request 1.5 x PN, acceptance test certificate to EN 1020 Flushing rings On request Support rings made of On request Sealing face of orifice plate On request with recess or groove 1) Order codes additive, any sequence. 2) Option only available outside Europe (manufactured according to Article 3, Paragraph 3 of the pressure equipment directive, without CE marking). Note on ordering Enclose a filled-out calculation sheet "Questionnaire for calculation of a primary differential pressure device according to DIN EN ISO 5167" with the order (necessary for device selection)! scope of delivery Two support rings with tapping sockets, one orifice disk, one gasket between orifice disk and support ring. Graphite (99.85 %) flat gasket with foil insert (1.01, 0.1 mm). Application for liquids, steam, gases, liquid gases, acids, hydrocarbons, oils and oil products. Accessories See "SITRANS P measuring instruments for pressure". Siemens FI /363

7 Application Suitable for non-corrosive and corrosive gases, vapors and liquids; permissible operating temperature -60 to +570 C Design One-piece orifice plate, orifice disk form A, B or D (see types of primary differential pressure devices in "Technical description", "Function"); see Ordering data for materials. Overall length 0 mm to DIN Nominal diameters EN: DN 50 to DN 500 ASME: 2 inch to 20 inch Nominal pressure EN: PN 6 to PN 315 ASME: class 150 to 2500 Sealing face to the mating flanges Plane, sealing face turned, N10/N12 to DIN ISO 1302, for soft gasket (PN 6 to PN 0) Plane, sealing face turned, N8 to DIN ISO 1302, for grooved gasket to DIN 2697 (PN 63 to PN 00) Plane, RF (raised faced) for versions to ASME Tapping sockets With connection thread G½ DIN ISO 228/1, for connection dimensions to DIN form V(see page /351) With threaded connection ½-1 NPT male, for version to ASME With ferrule for pipe Ø 12 mm, S series With welding connection Ø 21.3 mm Connection size The connection size depends on the operating pressure, the temperature of the medium (DIN and ) and the medium, e.g. For liquids and gases, - up to PN 160: Thread G½ or welding connection Ø 21.3 mm - from PN 6 and PN 00: Welding connection Ø 21.3 mm - > PN 00: Welding connection Ø 2 mm For steam - up to PN 100: Thread G½ or welding connection Ø 21.3 mm - from PN 6: Welding connection Ø 2 mm See "Technical description" and "Function" for position of the tapping sockets. /36 Siemens FI

8 SITRANS F flowmeters Dimensional drawings Tapping socket: Socket length is fixed in accordance with the pressure and nominal diameter (DIN , Part 2), dimensions in mm - Threaded connections of tapping sockets for liquids and gases up to PN 160, for steam up to PN 100, Versions for steam lines: See "Technical description", "Function" for position of the tapping sockets. Nominal diameter acc. to EN DN Inside diameter External diameter d / sealing face: plane, with recess or with groove. Orifice plates with single tappings for installation between EN flanges to EN , dimensions in mm and weights Nominal diameter acc. to ASME Orifice plates with single tappings for installation between ASME flanges to ASME B 16.5, dimensions in mm and weights Weight (approx. in kg) PN 6 PN 10 PN 16 PN 25 PN 0 PN 63 PN 100 PN 160 PN 250 PN 315 With smallest nom. pressure Nominal diameter With largest nom. pressure External diameter d / sealing face: plane, with recess Weight (approx. in kg) or with groove. Class 150 Class 300 Class 600 With smallest nominal pressure With largest nominal pressure 2 inch ½ inch inch inch inch inch inch inch inch inch inch inch Siemens FI /365

9 7 M E Z 7 M E Z for mounting between flanges Sealing faces to the mating flanges: plane. Nominal diameter acc. to EN DN and PN 160 DN and PN 160 DN and PN 160 DN 100 and PN 0 3 and PN 160 DN 125 and PN 0 3 and PN 160 DN 150 and PN 0 3 and PN 160 DN 200 PN 0 PN 63 and PN 160 1GA 1GE 1GF 1GH 1GJ 1GK 1HA 1HE 1HF 1HH 1HJ 1HK 1JA 1JE 1JF 1JH 1JJ 1JK 2AA 2AC 2AE 2AF 2AH 2AJ 2AK 2BA 2BC 2BE 2BF 2BH 2BJ 2BK 2CA 2CC 2CE 2CF 2CH 2CJ 2CK 2EA 2EC 2ED 2EE 2EF 2EH 2EJ 2EK DN 250 PN 0 PN 63 and PN 160 DN 300 PN 16 PN 0 PN 63 and PN 160 DN 350 PN 16 PN 0 PN 63 DN 00 PN 16 PN 0 PN 63 DN 500 PN 16 PN 0 Nominal diameter acc. to ASME 2 inch 2½ inch 3 inch inch 5 inch 2FA 2FC 2FD 2FE 2FF 2FH 2FJ 2FK 2GA 2GB 2GC 2GD 2GE 2GF 2GH 2HA 2HB 2HC 2HD 2HE 2HF 2HG 2JA 2JB 2JC 2JD 2JE 2JF 2KA 2KB 2KC 2KD 2KE 5GA 5GB 5GC 5HA 5HB 5HC 5JA 5JB 5JC 6AA 6AB 6AC 6BA 6BB 6BC /366 Siemens FI

10 SITRANS F flowmeters 7 M E Z 7 M E Z 6 inch 8 inch 10 inch 12 inch 1 inch 16 inch 20 inch for non-corrosive media Orifice plate and tapping socket made of 13 CrMo -5, Mat.No ; metering edge with X 5 CrNiMoNb 19 12, Mat.No , deposition welded; permissible working pressure 10 to +570 C, for tapping socket with ferrule for pipe, 12 mm, S series, max. 200 C for corrosive media Orifice plate and tapping socket made of X 6 CrNiMoTi , Mat. No ; permissible operating temperature -200 to +550 C, for tapping socket with ferrule for pipe, 12 mm, S series, max. 00 C 6CA 6CB 6CC 6EA 6EB 6EC 6FA 6FB 6FC 6GA 6GB 6GC 6HA 6HB 6HC 6JA 6JB 6JC 6KA 6KB 6KC Tapping sockets With threaded connection G½; for liquids and gases PN 160, for steam PN Opposite one another, straight 1 A 1 B - Any arrangement of tapping 1 G sockets (specify angle in plain text) With threaded connection ½-1 NPT male - Opposite one another, straight 1 Q 1 R - Any arrangement of tapping 1 T sockets (specify angle in plain text -Z Y02) With ferrule for pipe Ø 12 mm, S series, max. 200 C permissible - Opposite one another, straight 1 J 1 K - Any arrangement of tapping 1 M sockets (specify angle in plain text -Z Y02) With welding connection 21.3 mm; for liquids and gases PN , for steam PN 100 or 2 mm; for liquids and gases over PN 00, for steam over PN Opposite one another, straight 1 D 1 E - Any arrangement of tapping 1 H sockets (specify angle in plain text) Shape of orifice disk aperture (see figure "Shapes of orifice disk aperture") For flow in one direction - Orifice plate form A A - Quarter-circle nozzle form B B For flow in both directions - Cylindrical orifice plate form D D Manufactured according to pressure equipment directive (see "Questionnaire" (page /356)) Without² ) 0 According to Article 3, 1 Paragraph 3 According to category 1 2 According to category 2 3 According to category 3 Siemens FI /367

11 7 M E Z Further designs Order code 1) Add "-Z" to and specify Order code(s) and plain text. Calculation of orifice disk A11 aperture Add calculation sheet "Questionnaire for calculation of a primary differential pressure device acc. to DIN EN ISO 5167" to the order! Orifice plate without calculation Y01 Specify in plain text: Diameter of orifice disk aperture d =... mm Internal diameter of pipe D =... mm Radius of quarter-circle nozzle r =... mm Material certificate C01 Acceptance test certificate to EN Orifice plate degreased A12 for oxygen measurements Note: Cleaned and foil-packed. When using, note that the orifice plate must be completely degreased when fitted in the pipeline. Angle between tapping sockets Y02 (specify in plain text: Angle between the tapping sockets... ) Other materials On request Additional nominal diameters On request and nominal pressure stages according to EN and ASME Overall length 65 mm On request (required for tapping sockets arranged on one side) Cold water pressure test On request 1.5 x PN, acceptance test certificate to EN 1020 Flushing rings On request Sealing face of orifice plate On request with recess or groove Note on ordering Enclose a filled-out calculation sheet "Questionnaire for calculation of a primary differential pressure device according to DIN EN ISO 5167" with the order (necessary for device selection)! Scope of delivery: One-part orifice plate with tapping sockets Accessories: See "SITRANS P measuring instruments for pressure". 1) Order codes additive, any sequence. 2) Option only available outside Europe (manufactured according to Article 3, Paragraph 3 of the pressure equipment directive, without CE marking). /368 Siemens FI

SITRANS F flowmeters. SITRANS F O delta p - Primary differential pressure devices Metering pipe with orifice plate and annular chambers 4/369

SITRANS F flowmeters. SITRANS F O delta p - Primary differential pressure devices Metering pipe with orifice plate and annular chambers 4/369 and annular chambers Application Suitable for non-corrosive and corrosive gases, vapors and liquids; permissible operating temperature -10 to +00 C. Design Orifice plate with annular chambers consisting

More information

Flow Measurement SITRANS F O delta p - Primary differential pressure devices

Flow Measurement SITRANS F O delta p - Primary differential pressure devices Technical description Primary differential pressure devices to DIN EN ISO 5167 Nominal diameters EN: DN 50... DN 1000 ASME: 2 inch 40 inch Nominal pressure EN:... 0 ASME: 600 Orifice plates with annular

More information

CFR Series. Power Inductors OUTLINE FEATURES APPLICATIONS SPECIFICATIONS MITSUMI

CFR Series. Power Inductors OUTLINE FEATURES APPLICATIONS SPECIFICATIONS MITSUMI CFR Series Coils, Transformers OUTLINE Power inductors for preventing the diffusion of noises generated from power circuits and suppressing noise components coming through the power lines. ø8.7 ø11 max.

More information

Table 1d - FSA for All Returns, Females Tax Year

Table 1d - FSA for All Returns, Females Tax Year PR 10 Newfoundland and Labrador A0A 20,250 597,345 1,920 1,720 2,580 3,150 1,960 1,610 1,360 1,030 1,020 740 550 460 630 470 410 290 290 70 20 A0B 8,850 249,804 780 740 1,200 1,520 1,010 790 540 430 370

More information

Orifice flowmeter F O N4

Orifice flowmeter F O N4 Special features Suitable for any mounting positions without reduction in accuracy Complies with requirements for treatment and disinfection of swimming/ bathing pools (DIN 9 643) Simple installation Direct

More information

INSTRUMENT PANEL CLUSTERS

INSTRUMENT PANEL CLUSTERS INSTRUMENT PANEL CLUSTERS NOT BUYING AT THIS TIME REVISED ##### PART # MAKE APPLICATION 6/18/2018 PRICE 56045618 CHRY IPC 40.00 56045679 CHRY IPC 40.00 56051103 CHRY IPC 40.00 56049833 AC,AD CHRY IPC 40.00

More information

VACUUM PRESSURE PUMPS INSTALLATION CAUTIONS AND INFORMATION READ AND FOLLOW CAREFULLY!

VACUUM PRESSURE PUMPS INSTALLATION CAUTIONS AND INFORMATION READ AND FOLLOW CAREFULLY! F.A.A.-P.M.A. MODEL 1U128A AND 1U128B REVISION 17 February 21, 2002 VACUUM PRESSURE PUMPS INSTALLATION CAUTIONS AND INFORMATION READ AND FOLLOW CAREFULLY! The following information applies to all installations

More information

SITRANS P measuring instruments for pressure

SITRANS P measuring instruments for pressure Overview Siemens AG 009 Supplementary electronics for 4-wire connection Design Dimensions (W x H x D) in mm (inch) Electrical connection 80 x 10 x 60 (3.15 x 4.7 x.36) Screw terminals (Pg 13.5 cable inlet)

More information

Distributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. CERAMIC CHIP CAPACITORS C0G (NP0), X7R, X5R, Z5U and Y5V Dielectrics 10,

More information

Distributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. CERAMIC CHIP CAPACITORS C0G (NP0), X7R, X5R, Z5U and Y5V Dielectrics 10,

More information

Direct solenoid and solenoid pilot operated valves

Direct solenoid and solenoid pilot operated valves Direct solenoid and solenoid pilot operated valves Individual mounting Series Inline Manual operator Solenoid 4-way pilot with balanced poppet Air return 33 34 36 3 37 38 5 67 69 44 46 4 47 48P SERIES

More information

Field Variable Area Flowmeters BFP Global Purgemaster

Field Variable Area Flowmeters BFP Global Purgemaster Data Sheet IT Field Variable Area Flowmeters BFP Global Purgemaster 10A6100 n High Strength Stainless Steel Body - Rigid construction to maintain tube alignment and resistance to pipe strain. n "Snap-in"

More information

DATE: May 19, 2000 Service Instruction No. 1443E (Supersedes Service Instruction No. 1443D) Engineering Aspects are FAA Approved

DATE: May 19, 2000 Service Instruction No. 1443E (Supersedes Service Instruction No. 1443D) Engineering Aspects are FAA Approved DATE: May 19, 2000 (Supersedes Service Instruction No. 1443D) Engineering Aspects are FAA Approved SUBJECT: MODELS AFFECTED: TIME OF COMPLIANCE: Approved Slick Magnetos on Textron Lycoming Engines See

More information

Direct solenoid and solenoid pilot operated valves

Direct solenoid and solenoid pilot operated valves Direct solenoid and solenoid pilot operated valves Individual mounting Series Inline Oval shaped armature Encapsulated coil Push pin Manifold mounting Stacking Manifold base plug-in Manifold base plug-in

More information

7. Are you upgrading a complete engine from a TCM/ Bendix to a Slick system? If yes, purchase a complete Slick Ignition Upgrade Kit.

7. Are you upgrading a complete engine from a TCM/ Bendix to a Slick system? If yes, purchase a complete Slick Ignition Upgrade Kit. 1.1 PRODUCT APPLICATION INFORMATION WORKSEET The following information will aid you in selecting the correct magneto, upgrade kit, or ignition harness: 1. Engine Manufacturer 2. Engine Model Number 3.

More information

SERVICE INSTRUCTION. 652 Oliver Street Williamsport, PA U.S.A. Tel Fax

SERVICE INSTRUCTION. 652 Oliver Street Williamsport, PA U.S.A. Tel Fax 652 Oliver Street Williamsport, PA. 17701 U.S.A. Tel. 570 323 6181 Fax. 570 327 7101 www.lycoming.com SERVICE INSTRUCTION DATE: March 8, 2012 Service Instruction No. 1098H (Supersedes Service Instruction

More information

Grade boundaries June 2018 exams. GCSE Reformed (subjects which use the 9 to 1 grade scale)

Grade boundaries June 2018 exams. GCSE Reformed (subjects which use the 9 to 1 grade scale) Version 1.0 Grade boundaries June 2018 exams GCSE Reformed (subjects which use the 9 to 1 grade scale) This document presents grade boundaries for the new reformed GCSEs which use the 9 to 1 grade scale.

More information

Process connection. Further designs. Order code. to EN

Process connection. Further designs. Order code. to EN Replacement measuring cell for pressure for SITRANS P, DS III, DS III PA and DS III FF series 7 M F 4 9 9 0-7 7 7 7 0-0 D C 0 0.01... 1 bar g (0.15... 14.5 psi g) B 0.04... 4 bar g (0.6... 58 psi g) C

More information

Multiplication Tables of Various Bases

Multiplication Tables of Various Bases THE NUMBER BASE 10 100 Ternary (Base 3) 1 2 10 2 11 20 10 20 100 Quaternary (Base 4) 1 2 3 10 2 10 12 20 3 12 21 30 10 20 30 100 Quinary (Base 5) 1 2 3 4 10 2 4 11 13 20 3 11 14 22 30 4 13 22 31 40 10

More information

SERVICE INSTRUCTION. All Certified Lycoming direct drive engines. TIME OF COMPLIANCE: At owner s discretion.

SERVICE INSTRUCTION. All Certified Lycoming direct drive engines. TIME OF COMPLIANCE: At owner s discretion. 652 Oliver Street Williamsport, PA. 17701 U.S.A. Telephone +1 (800) 258-3279 U.S. and Canada (Toll Free) Telephone +1 (570) 323-6181 (Direct) Facsimile +1 (570) 327-7101 Email Technicalsupport@lycoming.com

More information

Direct solenoid and solenoid pilot operated valves

Direct solenoid and solenoid pilot operated valves Direct solenoid and solenoid pilot operated valves Individual mounting Series Inline Sub-base non plug-in 4 6 Air return Manual operator Solenoid 4-way pilot with balanced poppet Bonded spool 2 7 8 2 67

More information

LYCOMING CYLINDER PRICING

LYCOMING CYLINDER PRICING SHIPPING: 2415 EMBARCADERO WAY, PALO ALTO, CA 94303 MAILING: P.O. BOX 50608, PALO ALTO, CA. 94303-0608 Phone: 650-354-1399 Fax: 650-354-1395 LYCOMING CYLINDER PRICING CYLINDER PRICING ENGINE MODEL: O-235

More information

Direct solenoid and solenoid pilot operated valves

Direct solenoid and solenoid pilot operated valves Direct solenoid and solenoid pilot operated valves SIZE 26 mm Individual mounting Valve only No base non plug-in Conform to ISO 15407/1 Manifold mounting Valve only No base non plug-in Conform to ISO 15407/1

More information

3RG4 BERO Inductive Proximity Switches

3RG4 BERO Inductive Proximity Switches 3RG40 11 3RG40 11 0AA00 10/14 3RG40 11 0AB00 10/14 3RG40 11 0AF00 10/13 3RG40 11 0AF05 10/18 3RG40 11 0AF33 10/17 3RG40 11 0AG00 10/13 3RG40 11 0AG05 10/18 3RG40 11 0AG33 10/17 3RG40 11 0CC00 10/14 3RG40

More information

MOONEY INTERNATIONAL CORPORATION The Symbol of Performancet MOONEY SPECIAL LETTER Date:

MOONEY INTERNATIONAL CORPORATION The Symbol of Performancet MOONEY SPECIAL LETTER Date: MOONEY INTERNATIONAL CORPORATION The Symbol of Performancet MOONEY SPECIAL LETTER 15-24 Date: 11-19-2015 SUBJECT: MODELS/ S/N AFFECTED: To ADVISE MOONEY OWNERS/OPERATORS of the LYCOMING Service Instruction

More information

Heavy Duty Actuators CONTROLS. Pneumatic Actuators for Quarter-Turn Valves and Dampers Torques to 1,600,000 in. lbs. Double Acting and Spring Return

Heavy Duty Actuators CONTROLS. Pneumatic Actuators for Quarter-Turn Valves and Dampers Torques to 1,600,000 in. lbs. Double Acting and Spring Return CONTROLS Division of A-T Controls Heavy Duty Actuators Pneumatic Actuators for Quarter-Turn Valves and Dampers Torques to,600,000 in. lbs. Double Acting and Spring Return THD S E R I E S The Triac line

More information

Genuine Metaris Gear Product Technical Catalog. Pumps & Components - MH Series Bearing & Bushing Style

Genuine Metaris Gear Product Technical Catalog. Pumps & Components - MH Series Bearing & Bushing Style Genuine Metaris Gear Product Technical Catalog Pumps & Components - MH Series Bearing & Bushing Style www.metaris.com MH365 Series Bushing Pump Features Metaris Bushing Pumps & Motors are available in

More information

THD. Series. Heavy Duty Actuators. Pneumatic Actuators for Quarter-Turn Valves and Dampers CONTROLS. Torques to 1,600,000 In-lbs

THD. Series. Heavy Duty Actuators. Pneumatic Actuators for Quarter-Turn Valves and Dampers CONTROLS. Torques to 1,600,000 In-lbs CONTROLS Division of A-T Controls, Inc. THD Series Heavy Duty Actuators Pneumatic Actuators for Quarter-Turn Valves and Dampers Torques to 1,600,000 In-lbs Double Acting and Spring Return Symmetric and

More information

DATE: February 13, 2019 Service Instruction No. 1037V (Supersedes Service Instruction No. 1037U) Engineering Aspects are FAA Approved

DATE: February 13, 2019 Service Instruction No. 1037V (Supersedes Service Instruction No. 1037U) Engineering Aspects are FAA Approved 652 Oliver Street Williamsport, PA. 17701 U.S.A. Telephone +1 (800) 258-3279 U.S. and Canada (Toll Free) Telephone +1 (570) 323-6181 (Direct) Facsimile +1 (570) 327-7101 Email Technicalsupport@lycoming.com

More information

Limit Switches and Safety

Limit Switches and Safety and Safety Introduction Overview 3SE5 23., 3SE5 21. 3SF1 2.4 3SE5 24., 3SF1 244 3SE5 13., 3SE5 11., 3SF1 114 3SE5 12., 3SF1 124 3SE5 16. 3SE5 232, 3SE5 212, 3SF1 2.4 3SE5 132, 3SE5 112, 3SF1 1.4 Position

More information

ROTARY SHAFT / OIL SEALS GASKETS LINER RINGS REPAIR KITS BONDED SEALS O RINGS. Automotive Seals VW BARNWELL THE SEAL OF APPROVAL

ROTARY SHAFT / OIL SEALS GASKETS LINER RINGS REPAIR KITS BONDED SEALS O RINGS. Automotive Seals VW BARNWELL THE SEAL OF APPROVAL ROTARY SHAFT / OIL SEALS GASKETS LINER RINGS REPAIR KITS BONDED SEALS O RINGS Automotive Seals VW BARNWELL THE SEAL OF APPROVAL QUALITY AND SERVICE GUARANTEED Total Sealing Solutions Founded in 1972, M

More information

"#$%#$ &! ' ( )% *+! )%,-$#./! #0! 1#$. "#$%#$ *$%$ &! ( 2$/# 3$#! 4%. "#$%#$,5!#6! 70$ *#0! 80 */$6! 90!/ *6+.#0! *#0% ".::6,5!#6!

#$%#$ &! ' ( )% *+! )%,-$#./! #0! 1#$. #$%#$ *$%$ &! ( 2$/# 3$#! 4%. #$%#$,5!#6! 70$ *#0! 80 */$6! 90!/ *6+.#0! *#0% .::6,5!#6! ! "#$%#$&! '()%*+! )%,-$#./! #0! 1#$."#$%#$ *$%$&!(2$/#3$#! 4%."#$%#$,5!#6! 70$*#0! 0*/$6! 90!/*6+.#0! *#0%".::6,5!#6! 23451617241051240 1040 0#'09./$.%,:++0#;0:+ 9%>

More information

Stars or starlets? Competitor overview switching devices. Only for internal use. sirius IN COMPARISON

Stars or starlets? Competitor overview switching devices. Only for internal use. sirius IN COMPARISON Only for internal use Stars or starlets? Competitor overview switching devices sirius IN COMPARISON Who are the real stars? The comparison. Under ideal conditions, the human eye can make-out approximately

More information

General. Principles. 3-Trapped Key Switches. 11-Cat. No. Index. Logic. Power. Safety Switches Trapped Key Switches Overview

General. Principles. 3-Trapped Key Switches. 11-Cat. No. Index. Logic. Power. Safety Switches Trapped Key Switches Overview R Safety Trapped Key Overview Key Coding Below is an example reference guide that is useful in selecting and tracking codes. Start down the Aa column as the lower codes (typically Aa to Za) are stocked.

More information

BC. Materials. Working temperature (Seals) Sectors: Industrial, Agricultural

BC. Materials. Working temperature (Seals) Sectors: Industrial, Agricultural 1 SERI ISO-A Manufactured according ISO 7241-A norm, size meets also ISO 5675 requirements. Poppet Valve or Ball closing system. BSP, NPTF, SAE/ORB threads. Others available upon request. Materials Body:

More information

The Product Range. Technical Data

The Product Range. Technical Data The Product Range Section 3.1 - Basic Cylinder Bore sizes (mm): 10, 16, 25, 32, 40, 50 The basic cylinder series satisfies the support and guidance requirements of a great diversity of applications. Various

More information

MAC VALVES, INC. Rev. T

MAC VALVES, INC. Rev. T REVISION LEVEL DATE RELEASED CHANGE DESCRIPTION ECN NUMBER P.E. APPROVAL P.D APPROVAL A 5-11-95 ENGINEERING RELEASE 12727 EPJ B 1-15-96 ADDED 35 SERIES 13228 EPJ ADDED MOD 2938 TO 6500 SERIES, MODS 2910

More information

SSR SSR SSR SSR

SSR SSR SSR SSR DMX 52 Page DMX52 decoder firing board module 20 VAC reference Input 2 3 4 The Thyristor Firing board is compatible withdmx52 control standard 4 DMX52 triggers 2 3 4 - +- +- +- + The can trigger control

More information

FAR51. Insertion adapter with venting element Universal insertion adapter for existing flange nozzles, suitable for high temperature applications

FAR51. Insertion adapter with venting element Universal insertion adapter for existing flange nozzles, suitable for high temperature applications f ti r : FAR51 Insertion adapter with venting element Universal insertion adapter for existing flange nozzles, suitable for high temperature applications Application Process adapter for the microwave barriers

More information

Position and Safety Switches

Position and Safety Switches Siemens AG 20 Position and Safety Switches groups 41K, 42A /2 Introduction SIRIUS 3SE5 mechanical position switches /4 General data 3SE5, plastic enclosures /13 - Enclosure width 31 mm acc. to EN 50047

More information

Temperature Measurement Resistance thermometers

Temperature Measurement Resistance thermometers Temperature transmitters for mounting in the connection head The following temperature transmitters are available for mounting in the connection head: SITRANS TH100 Programmable two-wire temperature transmitter

More information

Specifications 54 Series Valve

Specifications 54 Series Valve Specifications 54 Series Valve Fluids: Compressed Air or Inert Gases Lubrication: Not required. If used, select a medium aniline point lubricant (between 180ºF and 210ºF) Safe Operating Temperature Range:

More information

2. COMPACT CYLINDERS series STRONG (RS, RQ)

2. COMPACT CYLINDERS series STRONG (RS, RQ) 2. COMPACT CYLINDERS series STRONG (RS, RQ) A new series of compact cylinders for long s and heavy-duty applications standard supplied with oversized guides and rods, the first one with adjustable pneumatic

More information

APPENDIX A Instruction Set. Op Code. T states Flags Main Effects. Instructions

APPENDIX A Instruction Set. Op Code. T states Flags Main Effects. Instructions APPENDIX A 8085 Instruction Set Instructions ACI byte CE 7 ALL A A + CY + byte ADC A 8F 4 ALL A A + A + CY ADC B 88 4 ALL A A + B + CY ADC C 89 4 ALL A A + C + CY ADC D 8A 4 ALL A A + D + CY ADC E 8B 4

More information

Direct solenoid and solenoid pilot operated valves

Direct solenoid and solenoid pilot operated valves Direct solenoid and solenoid pilot operated valves Individual mounting Series Inline Manual operator Solenoid 4-way pilot with balanced poppet Inlet (1) Exhaust (3) Cylinder () 33 34 36 3 37 38 5 67 69

More information

ELITE 2-BURNER PROPANE BARBECUE Assembly Manual

ELITE 2-BURNER PROPANE BARBECUE Assembly Manual ELITE 2-BURNER PROPANE BARBECUE Assembly Manual 85-3136-8 (G36402) Propane 1 Year limited Warranty Read and save manual for future reference. Assemble your grill immediately. Missing or damaged parts claims

More information

P-920, Revision 32 Page 2 of 13

P-920, Revision 32 Page 2 of 13 DEPARTMENT OF TRANSPORTATION P-920 FEDERAL AVIATION ADMINISTRATION Revision 32 Hartzell HC-C2Y, BHC-C2Y, CHC-C2Y, DHC-C2Y TYPE CERTIFICATE DATA SHEET NO. P-920 March 9, 2010 Propellers of models described

More information

Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs) Commercial L Series, SnPb Termination, X7R Dielectric 6.3V 250 VDC (Commercial Grade)

Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs) Commercial L Series, SnPb Termination, X7R Dielectric 6.3V 250 VDC (Commercial Grade) Commercial L Series, SnPb Termination, X7R Dielectric V 2 VDC (Commercial Grade) Overview KEMET s Commercial L Series with Tin/Lead Termination surface mount capacitors in X7R dielectric are designed to

More information

Bullet Valve (BV) Series

Bullet Valve (BV) Series ullet Valve (V) Series VERY FEW PARTS LONG LIFE LIFTING SOLENOID ONE PIECE POPPET / ARMATURE ALANCED DESIGN SOLENOID ISOLATED FROM CONTAMINATED AIR UNIQUE MOUNTING D-SEAL TECHNOLOGY LONG LIFE LIFTING SOLENOID

More information

~... se_rv_ic_e M_A_NU_AL_2_44_4._z1,~

~... se_rv_ic_e M_A_NU_AL_2_44_4._z1,~ WABCO... se_rv_ic_e M_A_NU_AL_2_44_4._z1, DN-11 DC NEUTRAL RELAYS PARTS LIST This service manual provides parts lists for 4-, 6-, 8-, and IO-point DN-11 DC Neutral Relays. Included in this Parts List is

More information

Order No. of the options EMC filter Class A

Order No. of the options EMC filter Class A Ordering Data for Variant Dependent Options The options listed here (filters, chokes, brake resistors, gland plates, fuses and circuit breakers) are inverter specific. The inverter and the associated options

More information

Service Manual Trucks

Service Manual Trucks Service Manual Trucks Group 37 Electrical Schematic VN, VHD VERSION2 From Build Date December 2004 PV776-20 040447 Foreword The descriptions and service procedures contained in this manual are based on

More information

SELECT 3-BURNER PROPANE BARBECUE Assembly Manual

SELECT 3-BURNER PROPANE BARBECUE Assembly Manual SELECT 3-BURNER PROPANE BARBECUE Assembly Manual 85-3096-2 (G31221) Propane 1 Year limited Warranty Read and save manual for future reference. Assemble your grill immediately. Missing or damaged parts

More information

THE Ultra 4-Link Rear

THE Ultra 4-Link Rear THE Ultra 4-Link Rear Fully machined lightweight aluminum housing & components 16, 17", 18" and 19" center to center 4-link widths 3/4 thick and internally ribbed faceplate Integral wheelie bar mounts

More information

There are many pre-designs of Vulkan launcher.

There are many pre-designs of Vulkan launcher. There are many pre-designs of Vulkan launcher. This is next one: age A(x8) - h=45 m, d=3,9 m age B - h=57 m, d=7,75 m age C - h=27 m, d=6,7 m escape syem - h=3,8 m, d=1,1 m Model 2 H ~920 mm Paper used:

More information

There are many pre-designs of Vulkan launcher.

There are many pre-designs of Vulkan launcher. There are many pre-designs of Vulkan launcher. This is next one: ge A(x8) - h=45 m, d=3,9 m ge B - h=57 m, d=7,75 m ge C - h=27 m, d=7,75 m escape syem - h=3,8 m, d=1,1 m Model 1 H ~920 mm Paper used:

More information

Overview. Benefits. Applications. Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs) X7R Dielectric, VDC (Commercial Grade)

Overview. Benefits. Applications. Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs) X7R Dielectric, VDC (Commercial Grade) X7R Dielectric, 2 VDC (Commercial Grade) Overview KEMET s X7R dielectric features a 1 C maximum operating temperature and is considered temperature stable. The Electronics Components, Assemblies and Materials

More information

Overview. Benefits. Applications. Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs) X7R Dielectric, VDC (Commercial Grade)

Overview. Benefits. Applications. Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs) X7R Dielectric, VDC (Commercial Grade) X7R Dielectric, 2 VDC (Commercial Grade) Overview KEMET s X7R dielectric features a C maximum operating temperature and is considered temperature stable. The Electronics Components, Assemblies and Materials

More information

94D / 94F / 94M / 96M

94D / 94F / 94M / 96M 94D / 94F / 94M / 96M - 2016 1 Meter Runs MBL 500 Application Meter runs combine inlet and outlet piping with a flow element which is used for flow measurement of one-phase aggressive and non-aggressive

More information

CERAMIC CHIP CAPACITORS

CERAMIC CHIP CAPACITORS CERAMIC CHIP CAPACITORS INTRODUCTION Ceramic chips consist of formulated ceramic dielectric materials which have been fabricated into thin layers, interspersed with metal electrodes alternately exposed

More information

Applications C 1206 C 106 M 4 R A C TU. Rated Voltage (VDC) 9 = = 10 4 = 16 3 = 25 6 = 35 5 = 50 1 = = 200 A = 250

Applications C 1206 C 106 M 4 R A C TU. Rated Voltage (VDC) 9 = = 10 4 = 16 3 = 25 6 = 35 5 = 50 1 = = 200 A = 250 X7R Dielectric, 2 VDC (Commercial Grade) Overview KEMET s X7R dielectric features a 1 C maximum operating temperature and is considered temperature stable. The Electronics Components, Assemblies & Materials

More information

AERO ACCESSORIES, Inc.

AERO ACCESSORIES, Inc. www.tempestplus.com AERO ACCESSORIES, Inc. COVERS APPLICATIONS FOR FAA PMA APPROVED AVIATION SPARK PLUGS APPLICATION GUIDE ISSUED REVISED PAGES REVISION MO DAY YR MO DAY YR 06 21 10 00 00 00 1 of 10 Original

More information

GH General Horizontal, Close Coupled and Frame Mounted Pumps

GH General Horizontal, Close Coupled and Frame Mounted Pumps GH General Horizontal, Close Coupled and Frame Mounted Pumps Technical Specification Pages This page left intentionally blank. 1.0 Overview. The GH Series is Carver s horizontal, end suction pump for handling

More information

RAISEBORING DRILL PIPES

RAISEBORING DRILL PIPES Secoroc Rock Drilling Tools RAISEBORING DRILL PIPES Catalogue Introducing Raiseboring drill string components Atlas Copco Secoroc has a long history in Raiseboring that finds its roots in the Robbins Raiseboring

More information

Type 520C 85 C Long Life, Inverter Grade, Aluminum High Ripple, Long Life Screw Terminal Type

Type 520C 85 C Long Life, Inverter Grade, Aluminum High Ripple, Long Life Screw Terminal Type click here to see hardware and mounting options Type 520C 85 C Long Life, Inverter Grade, Aluminum Type 520C is the 85 C version of the Type 550C Inverter-Grade capacitor. It delivers the ripple-current

More information

IEC CONTACTORS. Contacts Model List Model List AC3 UL 115 V 230 V 200 V 230 V 460 V 575 V NO NC Number Price Number Price 3RT101

IEC CONTACTORS. Contacts Model List Model List AC3 UL 115 V 230 V 200 V 230 V 460 V 575 V NO NC Number Price Number Price 3RT101 IEC CONTACTORS Description: RT01 Contactors Are Available With Cage Clamps On The Main Terminal Connections As Well As The Auxiliary Terminal Connections. RT02, RT0 and RT04 Contactors Are Available With

More information

Updated June Cylinder Application Charts

Updated June Cylinder Application Charts Updated June 2017 Cylinder Application Charts NIC3 CYLINDER COATING EXTENDED LIFE REDUCED WEAR NIC3 CYLINDERS BETTER PERFORMANCE Nickel silicon carbide is a chemical compound coating of nickel and silicon

More information

Push Button Units and Indicator Lights

Push Button Units and Indicator Lights 3SB3, Inscriptions, 22 mm Insert labels Push Button Units and Indicator Lights Push buttons (clear) and illuminated push buttons with a flat button can be fitted with insert labels for identification purposes,

More information

AN RPM to TACH Counts Conversion. 1 Preface. 2 Audience. 3 Overview. 4 References

AN RPM to TACH Counts Conversion. 1 Preface. 2 Audience. 3 Overview. 4 References AN 17.4 RPM to TACH Counts Conversion 1 Preface 2 Audience 3 Overview 4 References This application note provides look up tables for the calculation of RPM to TACH Counts for use with the EMC2103, EMC2104,

More information

Flow Measurement SITRANS F S Clamp-on

Flow Measurement SITRANS F S Clamp-on Clamp-on ultrasonic flowmeters SITRANS FS20 Overview SITRANS F S clamp-on ultrasonic flowmeters provide highly accurate measurement while minimizing installation time and maintenance expense. Benefits

More information

Protection Equipment

Protection Equipment Protection Equipment Price Groups 101, 102, 121, 131, 143 /2 Introduction Motor Starter Protectors/ Circuit Breakers SIRIUS 3RV2 Motor Starter Protectors up to 40 A new /7 General data /13 For motor protection

More information

CRN. Series 740 Safety Valves. Aquatrol Safety Relief Valves

CRN. Series 740 Safety Valves. Aquatrol Safety Relief Valves Series 740 Safety Valves Series 740 safety and relief valve is designed for accuracy and reliability. Engineered for heavy-duty industrial usage. Multiple purpose safety and relief valve for all services:

More information

Direct solenoid and solenoid pilot operated valves

Direct solenoid and solenoid pilot operated valves Direct solenoid and solenoid pilot operated valves Series ISO Individual mounting Valve only No base non plug-in Conform to ISO 99/ Valve only No base plug-in Conform to ISO 99/ Manifold mounting Valve

More information

Series 240 Type 3351 Pneumatic On/off Valve

Series 240 Type 3351 Pneumatic On/off Valve Series 240 Type 3351 Pneumatic On/off Valve Application Shut-off valve with tight shut-off for liquids, gases and vapors according to DIN or ANSI standards Valve size DN 15 to 100 NPS ½ to 4 Pressure rating

More information

Direct solenoid and solenoid pilot operated valves

Direct solenoid and solenoid pilot operated valves Direct solenoid and solenoid pilot operated valves Individual mounting Series Inline Oval shaped armature Encapsulated coil Push pin onded balanced poppet Return spring Manifold mounting Stacking plug-in

More information

Type 550C 105 C High Ripple, Inverter Grade, Aluminum Ultra-Ripple, Long Life Screw Terminal Type

Type 550C 105 C High Ripple, Inverter Grade, Aluminum Ultra-Ripple, Long Life Screw Terminal Type click here to see hardware and mounting options Specifications Temperature Range 4 C to +5 C Rated Voltage Range 2 Vdc to 5 Vdc Capacitance Range 68 µf to 35, µf Capacitance Tolerance % +5% Type 55C is

More information

TM ETRS-TM35FIN-ETRS89 WTG

TM ETRS-TM35FIN-ETRS89 WTG Noise calculation model: ISO 9613-2 General Wind speed: 8,0 m/s Ground attenuation: General, Ground factor: 0,4 Meteorological coefficient, C0: 0,0 db Type of demand in calculation: 1: WTG noise is compared

More information

Flow Measurement SITRANS F S Clamp-on

Flow Measurement SITRANS F S Clamp-on Clamp-on ultrasonic flowmeters Overview SITRANS F S clamp-on ultrasonic flowmeters provide highly accurate measurement while minimizing installation time and maintenance expense. Benefits Easy installation;

More information

SIRIUS Innovations. Technical information for ring terminals SIRIUS. Answers for industry.

SIRIUS Innovations. Technical information for ring terminals SIRIUS. Answers for industry. SIRIUS Innovations. Technical information for ring terminals SIRIUS Answers for industry. Order data Assembly up to 7.5 kw (S00) fused assembly 2 Motor Starter (Fuses, Contactor, Overload Relay) Contactor

More information

CRN. Series 740 Safety Valves. 4 Aquatrol Safety Relief Valves

CRN. Series 740 Safety Valves. 4 Aquatrol Safety Relief Valves Series 740 Safety Valves Series 740 safety and relief valve is designed for accuracy and reliability. Engineered for heavy-duty industrial usage. Multiple purpose safety and relief valve for all services:

More information

CUSTOM ADD-ONS FOR ENGLISH UNITS

CUSTOM ADD-ONS FOR ENGLISH UNITS Spindles Flange Piloted Slot Collet Jacobs Taper Morse Taper See note on next page for location in the Specification Code No. Description A B C AA Flange 2.625 3.619/3.621 5.313 AB Piloted Slot 2.3125

More information

Collision Avoidance System CAS-M light. Manual

Collision Avoidance System CAS-M light. Manual Collision Avoidance System CAS-M light Manual V 1.10, 2/14/2017 Table of Contents Table of contents 1 System Overview... 3 1.1 Function principle... 3 1.2 Hardware... 3 1.3 Wiring... 4 1.4 CAN communication...

More information

Direct solenoid and solenoid pilot operated valves

Direct solenoid and solenoid pilot operated valves Direct solenoid and solenoid pilot operated valves Manual operator Solenoid Individual mounting Sub-base non Sub-base Manifold mounting Manifold base Sub-base/ manifold base non with latching solenoid

More information

Applications C 1206 C 106 M 4 R A C TU. Capacitance Tolerance J = ±5% K = ±10% M = ±20%

Applications C 1206 C 106 M 4 R A C TU. Capacitance Tolerance J = ±5% K = ±10% M = ±20% Surface Mount Multilayer Ceramic Chip acitors (SMD MLCCs) X7R Dielectric, 2 VDC (Commercial Grade) Overview KEMET s X7R dielectric features a 1 C maximum operating temperature and is considered temperature

More information

Pressure Measurement Fittings

Pressure Measurement Fittings Siemens G 2018 Overview ll shut-off fittings can be secured onto walls, racks (72 mm grid) and vertical and horizontal pipes. This offers the advantage when assembling a plant that the shutoff fittings

More information

Applications C 1206 C 106 M 4 R A C TU. Rated Voltage (VDC) 9 = = 10 4 = 16 3 = 25 6 = 35 5 = 50 1 = = 200 A = 250

Applications C 1206 C 106 M 4 R A C TU. Rated Voltage (VDC) 9 = = 10 4 = 16 3 = 25 6 = 35 5 = 50 1 = = 200 A = 250 Surface Mount Multilayer Ceramic Chip acitors (SMD MLCCs) X7R Dielectric, 2 VDC (Commercial Grade) Overview KEMET s X7R dielectric features a 1 C maximum operating temperature and is considered temperature

More information

Overload Relays. SIRIUS 3RU2 Thermal Overload Relays 3RU2 up to 40 A for standard applications. 5/78 Siemens IC Overview

Overload Relays. SIRIUS 3RU2 Thermal Overload Relays 3RU2 up to 40 A for standard applications. 5/78 Siemens IC Overview SIRIUS 3RU2 Thermal Overload Relays 3RU2 up to 40 A Overview 1 2 3 4 6 1 2 NSB0_0207a Connection for mounting onto contactors: Optimally adapted in electrical, mechanical and design terms to the contactors.

More information

Level Limit Switch liquiphant FTL 360 / FTL 361

Level Limit Switch liquiphant FTL 360 / FTL 361 Technical Information TI 184F/00/en evel imit Switch liquiphant FT 360 / FT 361 evel limit switch iquiphant II with vibrating probe. For all types of liquid. iquiphant level limit switch: FT 360, compact

More information

Measurement designations. General. BEP codes

Measurement designations. General. BEP codes BEP (Bodywork Exchange Parameter) are codes that identify unique targets on the vehicle to make information transfer between the vehicle manufacturer and bodybuilder simpler. The BEP codes follow the international

More information

Fluid Flow Components Composantes pour un monde fluide

Fluid Flow Components Composantes pour un monde fluide 6011 Fluid Flow Components Composantes pour un monde fluide Vancouver Edmonton Winnipeg Toronto Montreal Moncton Product Index BRASS FITTINGS Page Carded...45-46 Closet Bolt...42 Compression...9-12 Compression

More information

10/97 N Our policy is one of continued research and development. We therefore reserve the right

10/97 N Our policy is one of continued research and development. We therefore reserve the right ISO Cylinders Magnetic Piston Double Acting Ø 10 to 25 mm Magnetic piston as standard Conforming to ISO 6432 Corrosion resistance Buffer and adjustable cushioned models Supplied complete with nose mounting

More information

Microbore Hose, Assemblies & accessories

Microbore Hose, Assemblies & accessories bar DN2 and DN4 High pressure Microbore hose Technical data Microbore hose The microbore hose assembly, most commonly used to connect to a Minimess test point for pressure testing, has many other diverse

More information

Linear Guides Pneumatic linear drive Series OSP - P Adaptive modular system The Ortman System Plus OSP provides a comprehensive range of linear guides

Linear Guides Pneumatic linear drive Series OSP - P Adaptive modular system The Ortman System Plus OSP provides a comprehensive range of linear guides PNEUMATIC GROUP Guides ORTMAN SYSTEM PLUS LINEAR GUIDES FOR OSP-P 19 Linear Guides Pneumatic linear drive Series OSP - P Adaptive modular system The Ortman System Plus OSP provides a comprehensive range

More information

Level instruments. Continuous level measurement - Capacitance transmitters SITRANS LC300. 5/262 Siemens FI Overview.

Level instruments. Continuous level measurement - Capacitance transmitters SITRANS LC300. 5/262 Siemens FI Overview. Overview Configuration is an inverse frequency shift capacitance continuous It is ideal for standard industrial applications in chemical, hydrocarbon processing, food and beverage and mining, aggregate

More information

SIRIUS 3RU2 Thermal Overload Relays

SIRIUS 3RU2 Thermal Overload Relays Overview 1 2 3 4 6 1 2 NSB0_0207a Connection for mounting onto contactors: Optimally adapted in electrical, mechanical and design terms to the contactors. The overload relay can be connected directly to

More information

CAT. No. KS-570E. SCS Single Action Push Type. SCD Double Action Type. super. cylinder FUJIKURA RUBBER LTD.

CAT. No. KS-570E. SCS Single Action Push Type. SCD Double Action Type. super. cylinder FUJIKURA RUBBER LTD. CAT. No. KS-570E SC SCS Single Action Push Type SCD Double Action Type super cylinder FUJIKURA RUBBER LTD. General Description of BF Cylinders FC Series : Single/Double Action Standard Cylinders SC Series

More information

8WH2 Spring-Loaded Terminals

8WH2 Spring-Loaded Terminals 8WH2 Spring-Loaded Terminals /2 Introduction /3 General data on 8WH /7 8WH through-type terminals 1) /18 8WH hybrid through-type terminals 1) /21 8WH fuse terminals /23 8WH isolating blade terminals /25

More information

BRIEF INFORMATION Accelerator Pedal Sensors

BRIEF INFORMATION Accelerator Pedal Sensors BRIEF INFORMATION Accelerator Pedal Sensors Market and technological leader in accelerator pedal sensors with production experience. Production facilities and technical support worldwide (e.g. Mexico,

More information

Terminal Blocks Product Catalog Terminal Block Supplement. Introduction. 8WH6 ipo Plug-In Terminals. 8WH6 ipo Installation Terminals

Terminal Blocks Product Catalog Terminal Block Supplement. Introduction. 8WH6 ipo Plug-In Terminals. 8WH6 ipo Installation Terminals Terminal Blocks 2013 Product Catalog Terminal Block Supplement Introduction 8WH6 ipo Plug-In Terminals 8WH6 ipo Installation Terminals 8WH2 Spring-Loaded Terminals 1 2 3 4 8WH 8WH5 Combination Plug-In

More information

ALC40 Series 105 C. RoHS. Compliant

ALC40 Series 105 C. RoHS. Compliant ALC40 Series Compact Long life, 9000 hours at 105 C (Ur, Ir applied High ripple current Excellent surge voltage capability Optimized designs available on request RoHS Compliant application Suited for high

More information