Single Phase 110 Single Phase 115 Single Phase 220 Single Phase 230 Single Phase 230 Three Phase 200 Three Phase 200 Three Phase 220 Three Phase 230
|
|
- Hortense Warren
- 5 years ago
- Views:
Transcription
1 INDUTION MOTORS Single-Phase, Three-Phase 9 (1/8 HP) Frame Size 3.54 in.sq.(9mm sq.) GER SFETY STD. Specifications ontinuous Rating Upper Name:Pinion Shaft Type Lower Name( ):Round Shaft Type Output Power oltage Frequency urrent Starting Torque Rated Torque Rated Speed Lead ire Type Dimension 1 Terminal Box Type Dimension 2 onduit Box Type Dimension 3 5IK9GU-U 5IK9GU-TU 5IK9GU-FH (5IK9-U) (5IK9-TU) (5IK9-FH) 5IK9GU-E (5IK9-E) 5IK9GU-S (5IK9-S) 5IK9GU-FUL (5IK9-FUL) 5IK9GU-TE (5IK9-TE) 5IK9GU-ST (5IK9-ST) 5IK9GU-EH (5IK9-EH) 5IK9GU-SH (5IK9-SH) HP 1/8 9 Single Phase 11 Single Phase 1 Single Phase 2 Single Phase 23 Single Phase 23 Three Phase Three Phase Three Phase 2 Three Phase 23 Single Phase 1 Hz oz-in mn m oz-in mn m The product contains a built-in thermal protector. hen a motor overheats for any reason, the thermal protector is opened and the motor stops. hen the motor temperature drops, the thermal protector closes and the motor restarts. Be sure to turn the motor off before inspecting. The "U" and "E" at the end of the model name indicate that the unit includes a capacitor. These two letters are not listed on the motor nameplate. hen the motor is approved under various safety standards, the nameplate is adopted. The conduit box type of the motors are not DE approved r/min F Gearmotor Torque Table The maximum permissible torque with a decimal gearhead with a gear ratio of 1 is lb-in (N m). Right-ngle gearhead may be connected. See page [-21] for more information on the right-angle gearheads. Single-Phase 1/23, Three-Phase 23 Hz Unit = Upper values: lb-in / Lower values: N m 5IK9GU-U 5IK9GU-TU 5IK9GU-FH Speed r/min Gear Ratio IK9GU-E 5IK9GU-TE 5IK9GU-EH IK9GU-S 5IK9GU-ST 5IK9GU-SH 5IK9GU-FUL Single-Phase 23/5Hz Unit = Upper values : lb-in / Lower values : N m Speed r/min Gear Ratio IK9GU-E 5IK9GU-TE 5IK9GU-EH Gearheads are sold separately. Enter the gear ratio in the box ( ) within the model number. colored background indicates gear shaft rotation in the same direction as the motor shaft; a white background indicates rotation in the opposite direction. The speed is calculated by dividing the motor s synchronous speed (5 Hz: r/min, Hz: r/min) by the gear ratio. The actual speed is 2 % less than the displayed value, depending on the size of the load. -1 ORIENTL MOTOR GENERL TLOG -3
2 Dimensions Scale 1/4, Unit = inch (mm) q/gearhead 5IK9GU-U 5IK9GU-E 5IK9GU-S 5IK9GU-FUL eight (Mass): 7.1 lb.(3.2 kg) 5IK9-U 5IK9-E 5IK9-S 5IK9-FUL eight (Mass): 7.1 lb.(3.2 kg) 5.31(135) 2.5(5).3 () 1.5(38) 1.5.DI..24DI. ( ) (9 9).8(2) (.) (9 9) (9 9).71 () 4.7DI. (.5) (3) ( 83.35) 4.7DI. (.5) (3)-LEDS UL Style 3271, G 22 3' 22 3' w/gearhead 5IK9GU-TU 5IK9GU-TE 5IK9GU-ST 5IK9-TU 5IK9-TE 5IK9-ST.98 (9 9) () 1.1MX. (28) 2.95(75).24() 1.5.DI..24DI. ( ).71 () 2.44 (2) 1.9 (43) 4.7DI. (.5).8(2) (3) (.) ( 83.35) (9 9) 4.7DI. (.5) e/gearhead.3() 5.31(135) 2.5(5) 1.5 (38).DI.(.5) -4HOLES (9 9) Use cabtyre cable with the diameter of.24di.( ).47DI.( ). 5IK9GU-FH 5IK9GU-EH eight (Mass): 8.2 lb.(3.7 kg).di.( 21.5) 2.91(74) 3.94(1).DI..24DI. ( ) 2.5(5) 1.22 (31) (9 9) () 4.7DI. (.5).3() 5.31(135) MOTOR LED IRE 3 GROUND LED IRE 1.28 (7) 2.5(5) 1.5 UL style 32, G UL style 32, G (38).DI. (.5) -4HOLES (9 9) -4-1 ORIENTL MOTOR GENERL TLOG
3 5IK9-FH 5IK9-EH eight (Mass): 8.2 lb.(3.7 kg).8(2) (3) (.) ( 83.35) (9 9) 4.7DI. (.5) 5IK9GU-SH.DI.( 21.5) 1.77(45).91(23) 2.13(54) 2.95(75) (9 9) 1.5.DI..24DI. ( ).71() 4.7DI. ( ±.5).3() 5.31(135) 2.5(5) 1.5(38) (9 9) MOTOR LED IRE 3 UL style 32, G GROUND LED IRE 1 UL style 32, G 5IK9-SH Round Shaft Type.8(2) (3) (.) ( 83.35) (9 9) 4.7DI. (.5) -1 ORIENTL MOTOR GENERL TLOG -5
4 Decimal Gearhead 5GU1XKB eight (Mass): 1.32 lb.(. kg) Key and Key Slot Scale 1/2 (The key is provided with the gearhead) 2.4(1) (21) (4).8 (2) ( 83.35) (9 9) 4.7DI. (.5) 1.5±.79 (28.58±.2).8. (4.73.3) (4.73 ).8. (4.73.3) (2.743 ).4DI.( 1.8)-4HOLES (included with the motor) 1.19DI ( 4.3).79 () B.1(4) B+.59().39 (1) R.39(1).24() 2.19DI. ( 4.3).79 ().1(4).28 B.39(1) (7) B.59() 5IK9GU- U HFUL 5IK9- U 5IK9GU- E 5IK9- E 5IK9GU-FUL 5IK9-FUL HBFUL HUL Dimensions in. (mm) B 1. (29) 1. (29).91 (23.5) 1.1 (41) 1.1 (41) 1.4 (37) eight oz (g) Dimension No (95) 1 3. (85) (5) 2 If you need to order a capacitor without a motor, add "-" to the capacitor model number shown. capacitor cap is always included with a capacitor. Right-ngle Gearheads The right-angle gearhead provides an output shaft that is at a right angle to the motor s output shaft. See page [-21] for specifications and other information ORIENTL MOTOR GENERL TLOG
5 iring Diagrams The direction of motor rotation is as viewed from the shaft end of the motor. Lead ire Type Direction 5IK9GU-U 5IK9GU-E 5IK9GU-S 5IK9GU-FUL S (U) R () S () T Yellow () direction, flip switch S to. () direction, flip switch S to. Yellow Terminal Box Type onduit Box Type Direction 5IK9GU-TU 5IK9GU-TE 5IK9GU-ST 5IK9GU-FH 5IK9GU-EH 5IK9GU-SH S Z2 U2 U1 (U) R () S () T U S Green/Yellow U Green/Yellow () direction, flip switch S to. () direction, flip switch S to. () direction, flip switch S to. () direction, flip switch S to. hange the direction of motor rotation only after bringing the motor to a stop. If an attempt is made to change the direction of rotation while the motor is rotating, the motor may ignore the reversing command or change its direction of rotation after some delay. ccessories Mounting Brackets Optional die-cast aluminum mounting brackets are available. They can be used to install motors with or without gearheads. See page [-2] for the dimensions. name SOL5U Flexible oupling Optional clamping couplings are available. See page [-2] for the dimensions. -1 ORIENTL MOTOR GENERL TLOG -7
Features. Structure. Safety Standards and CE Marking For -AWMU, -CWME, -SWM Type. Construction A ORIENTAL MOTOR GENERAL CATALOG
Electromagnetic Brake Motors This power off, electromagnetic brake coupled to reversible motors and induction motors (three-phase type) provides output of W W (three-phase: W W). These motors are best
More informationCOMPONENT Type SS21-UL Type
SPEED CONTROL MOTORS COMPONENT Type Type A tachogenerator built into induction motors, in combination with the specially designed control pack, allows multi-functional operation such as speed control,
More informationUS U. Speed Control Motors. Features. Safety Standards and CE Marking M o t o r. Product Number Code
Speed Control Motors US Series The US series combines a speed control motor and a control unit. The capacitor and the potentiometer have been integrated into one compact control unit. The series is designed
More informationInduction Motors. Standard AC Motors. Constant Speed Motors. Standard AC Motors C-19. Induction Motors
Standard AC Introduction Induction Induction Standard AC Constant Speed Induction Reversible Electromagnetic Brake Clutch & Synchronous Brake Low-Speed Synchronous Watertight, Dust-Resistant Gearheads
More informationCurrent. Starting Torque. Rated Torque Single-Phase Three-Phase
Standard C s High Power Induction s BH Series 2 Frame Size: 14 mm Right-ngle Shaft Parallel Shaft Features 6 15 25 4 6 9 2 BH Series High Power 2 Smallest frame size among 2 motors Hypoid Gear-Employed
More informationRated Torque. Current. Starting Torque Single-Phase Three-Phase
Standard C s High Power Induction s BH Series 2 Frame Size: 14 mm Right-ngle Shaft Parallel Shaft Features 6 15 25 4 6 9 2 BH Series High Power 2 Smallest frame size among 2 motors Hypoid Gear-Employed
More informationC B Motors CB I W U. Clutch and Brake Motors. Features. Product Number Code. Construction A ORIENTAL MOTOR GENERAL CATALOG
lutch and Brake s B s This compact precision motor is equipped with an internal clutch and brake for use with a gearhead. The combination makes it the ideal motor for uses involving frequent START/STOP
More informationOutput Power W HP VAC Hz A Three-Phase Three-Phase
Induction 1 W, 3 W (1/75 HP, 1/25 HP) 6 W (1/125 HP) High Power Induction BH Series 2 W (1/4 HP) Frame Size: 14 mm ( 4.9 in.) Cable Type Right-Angle Hollow Shaft Terminal Box Type Parallel Shaft 15 W (1/5
More informationConforms to Power Supply Voltages in Asia Induction Motors, Reversible Motors, and Electromagnetic Brake Motors
RoHS Directive-Compliant Standard AC Motors World K Series Conforms to Power Supply Voltages in Asia Induction Motors, Reversible Motors, and Electromagnetic Brake Motors New products that conform to power
More informationReversible Motors. Standard AC Motors. Constant Speed Motors. Standard AC Motors C-75. Reversible Motors
Standard AC Introduction Induction Standard AC Constant Reversible Reversible Reversible Electromagnetic Brake Clutch & Synchronous Brake Low- Synchronous Watertight, Dust-Resistant Torque Gearheads Linear
More informationElectromagnetic. Brake Motors. Constant Speed Motors. Standard AC Motors A-109. Standard AC Motors Introduction. Brake Motors
Standard AC Constant Speed Standard AC Introduction Induction Reversible V Series Clutch & Synchronous Low-Speed Watertight, Synchronous Dust-Resistant Gearheads Page Features and Types of A-11 General
More informationLow-Speed. Constant Speed Motors. Standard AC Motors A-203. Standard AC Motors Introduction. Low-Speed Synchronous Motors.
Standard C Constant Speed Low-Speed Synchronous Standard C Introduction Induction Reversible Electromagnetic Brake V Series Clutch & Brake Synchronous Low-Speed Synchronous Low-Speed Synchronous Watertight,
More informationRoHS-Compliant. Watertight, Dust-Resistant Motors FPW Series
RoHS-Compliant Watertight, Dust-Resistant s FPW Series 1 RoHS-Compliant Watertight, Dust-Resistant s FPW Series Induction Type The FPW Series are geared motors which conform to the IEC standard IP67 (Recognized
More informationTorque Motors 3 W, 6 W, 10 W, 20 W
Torque 3 W, 6 W, 1 W, W Connection Information Technical reference Page G-1 Safety standards Page H- Introduction These torque motors conform to safety standards. By providing an external voltage adjustment
More informationK Series. Next-Generation Right-Angle Shaft Geared Motors. Compact Standard AC Motors
Compact Standard C Motors K Series Induction Motors Hypoid Right-ngle Hollow Shaft JH Gear Hypoid Right-ngle Solid Shaft JL Gear 4 W 6 W 9 W Highly Efficient, Strong Next-Generation Right-ngle Shaft Geared
More informationUS Series Single-Phase 110/115 VAC Single-Phase 220/230 VAC
RoHS-Compliant Speed Control Motor and Control Unit Package US Series Single-Phase 11/11 VAC Single-Phase 22/23 VAC RoHS-Compliant Speed Control Motor and Control Unit Package US Series Single-Phase 11/11
More informationAC Motor Systems US Series
US Series The US Series combines a control unit and an AC speed control motor. Connection between the motor and control unit is simplified by an easy-to-use connector. The US Series is designed for applications
More informationSMK Series. Additional Information. Stepping Motors. Technical Reference F-1 General Information G-1. Motor & Driver Packages.
Stepping s Low-Speed Synchronous s SMK Series dditional Information Technical Reference F-1 General Information G-1 Introduction S S PLUS SC RK CFK2 CSK PMC UMK CSK PKPV PK UI212G EMP41 SC EMP42 SCE SG8J
More informationWatertight, Dust-Resistant. Motors. Standard AC Motors A-207. Standard AC Motors Intro duction. Motors. AC Speed Control Motors Inverter.
Standard AC Standard AC Intro duction Induction Reversible Electromagnetic Brake Right-Angle Gearheads SB5W US ES2 FE1/FE2 AC Speed Control Inverter Torque Accessories Installation A-27 Standard AC RoHS-Compliant
More informationHBL Series HBL 5 40 K - GN HBL 5 60 N - 5. Features. Product Number Code A ORIENTAL MOTOR GENERAL CATALOG
HBL Series This slim line motor and compact driver produces constant torque throughout its speed range of r/min. The HBL series is suitable for smaller size applications. In the HBL series, a driver is
More informationStandard AC Motors C-9
Standard AC C-9 Overview, Product Standard AC Constant Speed Constant Speed Reversible Reversible Brake Brake Clutch & Brake Clutch & Brake Synchronous Synchronous Torque Watertight, Dust-Resistant Gearheads
More informationStandard AC Motors. Single-Phase Induction Motors K Series. Three-Phase High-Efficiency Induction Motors. K S Series
Standard C s Single-Phase s K Three-Phase High-Efficiency s Since 188 Founded In 188. Legendary Craftsmanship. Oriental was founded in 188. We were successful in making the prototype of an electric motor
More informationAdditional Information. Stepping Motors. Technical Reference F-1 General Information G-1. Motor & Driver Packages.
Stepping Stepping dditional Information Technical Reference F- General Information G- Introduction S S PLUS SC RK CFK2 CSK PMC UMK CSK PKPV PK UI22G EMP4 SC88 EMP42 SC88E SG8J SMK ccessories Closed Loop
More informationMB Series AC Centrifugal Blowers
MB Series AC Centrifugal Blowers Impeller Diameter 6.3 in. dia. ( 16 mm) SAFETY STD. AC INPUT Specifications c Materials Motor Case: Casing: Impeller: Aluminum Voltage Frequency Current Input Power Max.
More informationConstant Speed Motors
Standard AC Standard AC Constant Speed Brake High-Strength, Long Life, Low Noise V Series Constant Speed Torque Brake V Series TM Series Torque Features and Types of Constant Speed C-10 How to Read Specifi
More informationProvided Capacitor E: Single-Phase 220V/230V. Motor
Standard AC Motor Type MSSW Series This is unit products which is combined a compact speed control pack and W-9W speed control motor. The gearhead shown in the photograph is sold separately. Product Number
More informationStandard AC Motors E-75
Standard AC E-75 Overview Standard AC Three-Phase Reversible Electromagnetic Brake Clutch & Brake Low-Speed Synchronous IP67 Watertight, Dust-Resistant Brake Pack AC Speed Control AC input DSC E-75 E-76
More informationBrushless Motors BLE Series. Features
Brushless Motors BLE Series The BLE Series sets a new standard for brushless motors by contributing to energy savings in a compact yet powerful package. By using the control module (sold separately), further
More informationDC Input. Brushless Motors/AC Speed Control Motors D-117. Brushless Motors/AC Speed Control Motors D-117. BLH Series. Overview, Product Series
Brushless /C Speed Control D-117 Overview, Series Brushless /C Speed Control Brushless Brushless BMU BLE BLF BX BLH Series BLH C Speed Control DSC BHF ccessories Installation D-117 D-118 Brushless BLH
More informationConstant Speed Motors
Standard AC Introduction Induction Induction Standard AC Constant Speed Reversible Brake Reversible Brake High-Strength, Long Life, Low Noise Clutch and Brake Synchronous Synchronous Clutch & Synchronous
More informationBrushless DC Motor Systems AXU Series
RUN LOW HIGH POWER ALARM STAND-BY Brushless DC Systems AXU Series The AXU Series combines a compact, brushless DC motor with a speed control unit. These systems provide space savings, easy wiring and simple
More informationORIENTAL MOTOR CATALOGUE. Gearheads A-177. Features and Types A-178 Right-Angle Gearheads A-180. Standard AC Motors
ORIENTAL MOTOR CATALOGUE Standard AC Gearheads Features and Types A-7 Right-Angle Gearheads A-0 Brake FBL AXU AXH HBL MSS W ES US Gearheads Linear Heads Brushless Motor and Driver AC Speed Control Water
More informationDC Input. Brushless Motors/AC Speed Control Motors D-89. Brushless Motors/AC Speed Control Motors D-89. BLH Series. Overview, Product Series
Brushless /C Speed Control D-89 Overview, Series Brushless /C Speed Control Brushless Brushless BMU BLE2 BX BLH Series BLH C Speed Control DSC US2 ccessories Installation D-89 D-9 Brushless BLH Series
More informationBrushless DC Motor Systems AXU Series
RUN LOW ORIENTAL MOTOR HIGH POWER ALARM STAND-BY Brushless DC Systems AXU Series The AXU Series combines a compact, brushless DC motor with a speed control unit. These systems provide space savings, easy
More informationStandard AC Motors. Single-Phase Induction Motors. Series. Three-Phase High-Efficiency Induction Motors K S Series
Standard C Motors Single-Phase Motors K Three-Phase High-Efficiency Motors Since 188 Founded In 188. Legendary Craftsmanship. Oriental Motor was founded in 188. We were successful in making the prototype
More informationDC MOTOR INDEX DC MOTOR FEATURES W ( 60mm) W ( 80mm) W ( 80mm) W ( 90mm) W ( 90mm) 227.
DC MOTOR INDEX DC MOTOR FEATURES 216 15W ( 60mm) 219 25W ( 80mm) 221 40W ( 80mm) 223 60W ( 90mm) 225 90W ( 90mm) 227 120W ( 90mm) 229 DC Characteristic of D.C. magnet motor, Torque and Speed (r/min) When
More informationStandard Products Catalog
Standard Products atalog Induction Permanent Magnet D rushless D Parallel Gearmotors Motors ontrols Upgraded 3-Phase Models! pages 8 bodine-electric.com S-17a D 4 3 4 14.0/11.0 2.378 SQ MX 3 5.522 MX.554
More informationFE100/FE200. AC Speed Control Motors. Features
AC Speed Control Motors FE1/FE2 Additional Information Technical reference Page G-1 Safety standards Page H-2 The FE1/FE2 is a speed controller using inverter technology that enables speed control to be
More informationRoHS-Compliant Brushless Motor Systems BLF Series. Features
Speed Control Systems RoHS-Compliant Brushless Motor Systems BLF Series The BLF Series brushless motor achieved a maximum motor speed of 4 r/min. With the digital operator, digital setting and display
More informationFeatures and Types A-178 Right-Angle Gearheads A-180
ORIENTAL MOTOR CATALOGUE Standard AC Gearheads Features and Types A-7 Right-Angle Gearheads A-0 Brake FBL AXU AXH HBL MSS W ES US Gearheads Linear Heads Brushless Motor and Driver AC Speed Control Water
More informationFE100/FE200. Inverter
RoHS-Compliant FE1/FE2 A new inverter that enables speed control to be set easily with a built-in digital display. The inverter parameters have been set exclusively for Oriental Motor's three-phase motors,
More informationBrushless DC Motor Systems FBL2 Series
FBL2 Series The FBL2 Series consists of a high performance, compact, brushless DC motor and driver. This product is available with 75 W (1/1 HP) and 12 W (1/6 HP) output power. For easy installation, the
More informationAXH Series. Brushless Motor and Driver Package. Features
Brushless Motor and AC Speed Control Standard AC Brake FBL2 AXU AXH HBL MSS W ES US Gearheads Linear Heads Water Tight FPW Accessories Brushless Motor and Package AXH Series More compact, Higher power.
More informationHow to Read Gearhead Specifications Gearheads are shown for both AC standard motors and Speed Control Systems. Gearmotor Torque Table (Example)
How to Read Gearhead Specifications Gearheads are shown for both AC standard motors and Speed Control Systems. Gearmotor Table (Example) Single-Phase115/230 VAC, 60 Hz Speed r/min 600 5R90GU-AWU 5R90GU-AWTU
More informationRight-Angle Gearheads
Brushless Motor and Driver AC Speed Control Standard AC Brake FBL AXU AXH HBL MSS W ES US Gearheads Linear Heads Water Tight FPW Right-Angle Gearheads Right-Angle gearheads are flange-mounted gearheads
More informationBrushless Motors. Brushless Motors/AC Speed Control Motors. Brushless Motors/AC Speed Control Motors D-11. AC Input BX Series. AC Input BLF Series
Brushless Motors/C Speed Control Motors Introduction Brushless Motors/C Speed Control Motors Brushless Motors C Input BX Series C Input BLF Series C Input BLE Series C Input BLU Series DC Input BLH Series
More informationBLU Series. RoHS-Compliant. Brushless DC Motor and Driver Package. Features
RoHS-Compliant Brushless DC Motor and Driver Package BLU Series The BLU Series combines a brushless DC motor and a panel-installation type driver, enabling speed control via simple wiring and easy operation.
More informationHBL 5 60 N - 5. Brushless Motor and Driver Package. Features. Product Number Code A-126 ORIENTAL MOTOR GENERAL CATALOGUE. Standard AC Motors
Brushless and AC Speed Control Standard AC Brake FBL AXU AXH HBL MSS W ES US Gearheads Linear Heads Water Tight FPW Brushless and Package HBL Series This slim line motor and compact driver produces constant
More informationRoHS-Compliant. Brushless DC Motor and Driver Package BX Series
RoHS-Compliant Brushless DC Motor and Driver Package BX Series RoHS-Compliant Brushless DC Motor and Driver Package BX Series The BX Series brushless DC motor and driver packages offer high performance
More informationBLH. 24 VDC Input 15W / 30W / 50W / 100W BLH
BLH 24 VDC Input 15W / 30W / 50W / 100W BLH BLH BLH BLH BLH 2 3 System Configuration Geared Type/Combination Type Parallel Shaft Gearhead/Round Shaft Type The system configuration shown above is an example.
More informationBrushless DC Motor and Driver Package
RoHS-Compliant Brushless DC Motor and Driver Package BLH Series 24 VDC Input 15W (1/50HP) / 30W (1/25HP) / 50W (1/15HP) / 100W (1/8HP) The Brushless DC Motor and Driver Package BLH Series is a 24 VDC Power
More informationArtisan Technology Group is your source for quality new and certified-used/pre-owned equipment
Artisan Technology Group is your source for quality new and certified-used/pre-owned equipment FAST SHIPPING AND DELIVERY TENS OF THOUSANDS OF IN-STOCK ITEMS EQUIPMENT DEMOS HUNDREDS OF MANUFACTURERS SUPPORTED
More informationBrake Pack SB50W. Standard AC Motors A-143. Standard AC Motors Intro duction. Brake Pack. AC Speed Control Motors Inverter.
Standard AC SB5W Standard AC Intro duction Induction Reversible Right -Angle Gearheads SB5W AC Speed Control Inverter SB5W US ES2 FE1/FE2 Watertight, Dust-Resistant Torque Accessories Installation A-143
More informationBrushless DC Motor Systems
Introduction AC Input DC Input AC Motor Systems BX FBL2 AXU AXH BHF ES US Before Using a Speed Control System Additional Information Technical Reference F-1 General Information G-1 BX Series B-1 FBL2 Series
More informationAC Motor Systems. Speed Control Systems B-137. Speed Control Systems Introduction. BHF Series FE200 ES01/ US Series
AC Motor Systems Speed Control Systems Introduction BHF Series FE1/FE2 ES1/ES2 US Series FB FE1/ FE2 ES1/ ES2 US Installation Page BHF Series B-138 FE1/FE2 B-156 ES1/ES2 B-172 US Series B-22 B-137 RoHS-Compliant
More informationECP44304T-4 300HP,1785RPM,3PH,60HZ,449T,A44152M,TEFC
Product Information Packet EP44304T-4 300HP,785RPM,3PH,60HZ,449T,A445M,TEF opyright All product information within this document is subject to Baldor Electric ompany copyright protection, unless otherwise
More information2668CE CHI CHI CE CE CHI CHI VE VGHI44
WOB-L 2668/2688 SERIES MODELS models 2668CE22 2668CE44 2668CHI22 2668CHI44 2688CE22 2688CE44 2688CHI22 2688CHI44 2688VE44 2688VGHI44 Other models based on availability and minimum purchase. 2668CE32 2668CE40
More informationSUB-FHP AC GEARMOTORS PARALLEL SHAFT GEARMOTORS
SUB-FHP AC GEARMOTORS PARALLEL SHAFT GEARMOTORS 12-100 In-Lbs Single phase gearmotors, totally enclosed for continuous duty, general purpose applications. Permanent TEFC split capacitor designs are rated
More informationStandard Products Catalog
Standard Products atalog nduction Permanent Magnet rushless Right ngle earmotors s ontrols Upgraded 3-Phase s! pages 8 bodine-electric.com S-17a 4 3 4 14.0/11.0 2.378 SQ MX 3 5.522 MX.554 2 1.56±.06.5000
More informationLS Linear Heads. Standard AC Motors A-259. Standard AC Motors Introduction. Induction Motors. Reversible Motors. Brake Motors.
Standard C S inear Heads Standard C Introduction Induction Reversible Electromagnetic Brake V Series Clutch & Brake Synchronous ow-speed Watertight, Synchronous Dust-Resistant Torque Right-ngle Gearheads
More informationBX Series D-62. Brushless Motor and Driver Package. Features Speed Control. Position Control D-62
D-62 Brushless Motor and Driver Package Technical reference Page H-1 Regulations & Standards Page I-2 $For $ detailed information about regulations and standards, please see the
More informationBLE Series D-42. Brushless Motor and Driver Package. Features Speed Control Range of r/min (Speed ratio 40:1) Energy Savings
D-42 Brushless Motor and Driver Package BLE Series Technical reference Page H-1 Regulations & Standards Page I-2 RS-485 For detailed information about regulations and standards,
More informationEM4410TS-4 125HP,1785RPM,3PH,60HZ,444TS,A44076M,TEF
Product Information Packet EM0TS- HP,RPM,PH,0HZ,TS,A0M,TEF opyright All product information within this document is subject to Baldor Electric ompany copyright protection, unless otherwise noted. Part
More informationHigh Torque Gearheads
rushless DC Motor High Torque Gearheads 6W, 12W, 2W, 3W Gear Ratio 5-12 Right-ngle Hollow Shaft Hypoid JH Gearhead Foot Mount Type J Gearhead Parallel Shaft JV Gearhead Parallel Shaft Gearhead Right-ngle
More informationInstallation. Standard AC Motors A-305. Standard AC Motors Introduction. Installation. Induction Motors. Reversible Motors.
Installation Introduction Synchronous Low-Speed Watertight, Synchronous Dust-Resistant Installation Heads Pack Accessories Installation A-35 Installation Handling the Handling Always carry the motor by
More informationpoollux Power plx-pw60 & plx-pw100
poollux Power plx-pw60 & plx-pw100 ETL LISTED Conforms to UL STD 379; Certifi.ed.to.CSA.STD.C22.2.#218.1 5005508 Installation Instructions Read all instructions before attempting to perform installation
More informationRoHS-Compliant Brushless Motor Systems FBL Series. Features
Speed Control Systems RoHS-Compliant Brushless Motor Systems FB Series The FB Series consists of a high performance, compact, brushless motor and driver. This product is available with 75 W (1/1 HP) and
More informationORIENTAL MOTOR GENERAL CATALOG. Speed Control Motors A-113
ORIENTAL MOTOR GENERAL CATALOG Standard AC Motors Induction Motors Reversible Motors Synchronous Motors Speed Control Motors Product Line and Features A-114 Motor Selection A-116 FBL2 Series A-120 HBL
More informationAccessories. Standard AC Motors A-287. Standard AC Motors Introduction. Accessories
Standard AC Accessories Standard AC Introduction Induction Reversible Electromagnetic Brake Clutch & Brake Synchronous Low-Speed Watertight, Synchronous Dust-Resistant Right-Angle Gearheads Page Motor/Gearhead
More information5-Phase Stepping Motor and Driver Package CRKSeries 24 VDC Photocoupler Input 1-Pulse/2-Pulse Input Specifications
RoHS-Compliant -Phase Stepping Motor and Driver Package CRKSeries VDC Photocoupler Input -Pulse/-Pulse Input Specifications High-Resolution Type Standard Type PN Geared Type High-Torque Type TH Geared
More information2750 SERIES MODELS FEATURES WOB-L. Standard models 2750CE CGHI50. Other models based on availability and minimum purchase.
WOB-L 2750 SERIES MODELS models 2750CE50 2750CGHI50 Other models based on availability and minimum purchase. 2750CE60 2750CGHI60 2750CS50 2750CS60 2750TGHI48 2750BE75 2750BGHI75 275OBS75 275OVEF75 2750VHI75
More informationBLV Series Standard Type/Electromagnetic Brake Type
Brushless Motor and Driver Package DC Power Supply Input, High Power BLV Series Standard Type/Electromagnetic Brake Type Introducing the new high power, DC input BLV Series brushless motor and driver with
More informationBLV Series. Brushless Motor and Driver Package DC Power Supply Input, High Power. Features. Standard Type/Electromagnetic Brake Type
rushless Motor and river Package Power Supply Input, High Power LV Series Standard Type/Electromagnetic rake Type Introducing the new high power, input LV Series brushless motor and driver with output
More informationWheeler Mfg. Div Rex Intl USA Inc Jefferson Road Ashtabula, OH Tel: Fax:
Wheeler Mfg. Div Rex Intl USA Inc. 3744 Jefferson Road Ashtabula, OH 44004 Tel: 800-321-7950 Fax: 440-992-2925 wheeler@wheelerrex.com www.wheelerrex.com Some Operating Hints...... 2 The 68115 features
More informationECP4413T-4 150HP,3570RPM,3PH,60HZ,445TS,A4478M,TEFC
Product Information Packet EP4413T-4 150HP,3570RPM,3PH,60HZ,445TS,A4478M,TEF opyright All product information within this document is subject to Baldor Electric ompany copyright protection, unless otherwise
More informationMINA-GEAR GEARMOTORS P-1. Mina-Gear Features... P-2 Application & Selection... P-3 Right-Angle Worm Gearmotors Series Parallel Shaft Gearmotors
MINA-GEAR GEARMOTORS Mina-Gear..................................................... -2 Application & Selection................................................... -3 Right-Angle Worm Gearmotors 2100 Series
More informationInstallation. Standard AC Motors. Standard AC Motors C-277. Installation. Introduction. Induction Motors. Reversible Motors
Standard AC Standard AC Installation Brake Brake s Installation C-277 Installation Installation Handling the Handling Always carry the motor by placing it in the original package. If the motor must be
More informationModifiable TITAN Horizontal Motors Accessories and Modifications
36. Rotor, Standard And Optional Construction Standard rotor construction of 449, 5000 and 5800 frame TITAN products is typically die-cast aluminum. 720 RPM and slower is typically fabricated aluminum.
More informationMODIFICATIONS/ACCESSORIES
tigear_2_mod_access Page 90 Friday, October 15, 2004 1:30 PM TORQUE-RM II TORQUE-RM MXUM oncentric Reducer TIGER-2 MODIFITIONS/ESSORIES TIGER-2 MOTOR DPTER KIT TIGER-2 motor adapter kits are available
More informationMADE IN U.S.A. Inverter Grade Magnet Wire. Fan Cooled for High Output Power. Selectively hardened all steel gears
Bodine Electric s extensive line of stock 3-phase, inverter duty, induction motors and gearmotors was designed with your application needs in mind. Bodine offers the widest selection of inverter duty,
More informationCooling Fans MU Series 119 mm 38 mm Thick ( 4.69 in. 1. in. Thick) Ambient Temperature: 1 + C (+14 +14 F) Operating Voltage Range: ±1% Materials Frame: Die Cast Aluminum Blades: Polycarbonate (Flammability
More information5-Phase Stepping Motor and Driver Package RK Series
RoHS-Compliant -Phase Stepping Motor and Driver Package RK Series Standard Type PN Geared Type TH Geared Type Harmonic Geared Type RoHS-Compliant -Phase Stepping Motor and Driver Package RK Series The
More informationBLV Series. Brushless Motor and Driver Package DC Power Supply Input, High Power. Features. Standard Type/Electromagnetic Brake Type
Brushless Motor and Driver Package DC Power Supply Input, High Power BLV Series Standard Type/Electromagnetic Brake Type Introducing the new high power, DC input BLV Series brushless motor and driver with
More informationStepper Motors ver ver.5
A Stepper s Stepper s A-1 Overview... A-2 Overview and... A-15 & Stepper and RK Series A-16 RK... A-47... A-51 Stepper Series A-52 Stepper Series A-8 See Full Product Details Online www.orientalmotor.com
More informationCRK Series /0.72 Stepping Motor and Driver Package. Features
.6 /.7 Stepping Motor and Driver This series is a motor and driver package product that combines a high-performance,.6 /.7 stepping motor with a compact and low-vibration microstep driver. The lineup consists
More informationStandard AC Motors. Structure of Standard AC Motors. Brake Mechanism of Reversible Motors. Structure of an Electromagnetic Brake
VDE Standard AC Motors Structure of Standard AC Motors The following figure shows the structure of a standard AC motor. 3Motor Case 8Painting 2Stator 4Rotor 1Flange Bracket 6Ball Bearing Brake Mechanism
More informationElectronic Temperature Control & Bulb Well Assembly (AC)
Electronic Temperature ontrol & ulb Well ssembly () 0916 86816 This is a line voltage single-stage electronic temperature control with singlepole, double-throw relay output and LED indication. It is designed
More informationFor 2D/3D CAD drawings and distributor locations, go to
TYP TYP For 2/3 C drawings and distributor locations, go to www.bodine-electric.com Our website features the latest product specifications, technical documents, connection diagrams and instruction manuals.
More informationAC axial fans, AC diagonal fans
fans, C diagonal fans Technology ccessories EC-SYSTEMS ESM General information K series Q-motor EC axial EC axial fans series fans fans Ø 130 - Ø 250 14 C diagonal fans Ø 208 20 13 Contacts fans Ø 130
More informationMTF-E. Technical features
Technical features Power supply Threephase voltage from 220V to 690V, 50Hz or 60Hz; suitable for use with a PM inverter from 20Hz to the base frequency with constant torque load profile. Polarity 2 and
More informationLow Voltage Fuses For Motor Protection
Code Requirements The NEC or CEC requires that motor branch circuits be protected against overloads and short circuits. Overload protection may be provided by fuses, overload relays or motor thermal protectors.
More informationcause injury to humans and other physical damage. : Gives information that does not fall in the WARNING or CAUTION categories.
Be sure to thoroughly read and understand the SAFETY PRES given in this section before using the equipment in order to operate the equipment correctly. The precautionary measures described in this section
More informationInternational Motors/Gearmotors/Controls
International Motors/Gearmotors/Controls AC INTENATIONAL PODUCTS INTODUCTION The metric products listed in this section have been designed with international design standards in mind. The 230 volt, 50
More informationSt epping Mot or s C-i ORIENTAL MOTOR GENERAL CATALOG 2009/2010
C-i ORIENTAL MOTOR GENERAL CATALOG 29/21 C Introduction C-2 Stepping Motor and Driver Packages AC Input Stepping Motor and Driver Packages DC Input Stepping Motors AC Input AS Series C-14 DC Input ASC
More information56 mm sq. (2.20 inch sq.)
56 mm sq. (2.2 inch sq.) 1.8 /step RoHS Bipolar winding, Lead wire type Unipolar winding, Lead wire type p. 68 Customizing Hollow Shaft modification Decelerator Encoder Varies depending on the model number
More informationQUICK REFERENCE Stock Sub-FHP Gearmotors
QUICK REFERENCE Stock Sub-FHP Right-Angle Worm Type 10 & 13 Series AC Single & Three Phase Single Phase 115/230V 14-113 In-Lbs Page 155 DC SCR & Low Voltage DC SCR 90 & 180V 5-135 In-Lbs Low Voltage (12V)
More information56 mm sq inch sq.
Stepping Motors 56 mm sq. 2.2 inch sq. 1.8 /step Unipolar winding Lead wire type Bipolar winding Lead wire type P.4 Unipolar winding Lead wire type Model number Holding torque at Rated current Wiring Winding
More informationFYD Series DC24V BRUSHLESS DC MOTOR & SPEED CONTROL DRIVERS
BRUSESS DC MOTOR & SPEED CONTRO DRIVERS In this series, motors and drivers are sold separately. Please indicate the model type of each product. FYD Series DCV Distinguishing Features. Motors are designed
More informationSeries Mounting Accessory Distribution Source Color Temperature Voltage 10DEG 20DEG 40DEG 60DEG 60X15DEG
705M - ase Mount dditional mounts shown on page 5 12-1/2 8-3/8 (213mm) 6-3/4 (171mm) 8 onstruction Rugged die cast aluminum housing with clear tempered glass lens & 100% silicone rubber gaskets. ll hardware
More informationProtection against mechanical impacts IK 08 according to IEC 68, EN Insulation class Class F (155 C), class H (180 C) on request.
MVSI The MVSI series represents the line of reference products for manufacturer s of vibrating machines and plants operating in many industrial sectors and is made up of the largest range on the market,
More information