MB Series AC Centrifugal Blowers
|
|
- April Blake
- 5 years ago
- Views:
Transcription
1 MB Series AC Centrifugal Blowers Impeller Diameter 6.3 in. dia. ( 16 mm) SAFETY STD. AC INPUT Specifications c Materials Motor Case: Casing: Impeller: Aluminum Voltage Frequency Current Input Power Max. Air Flow Max. Noise level V Hz A W r/min CFM m 3 /min in H2O Pa db(a) F Single-Phase MB1665-B Single-Phase Single-Phase Single-Phase Single-Phase Single-Phase MB1665-D Single-Phase Single-Phase Single-Phase Three-Phase MB1665-T Three-Phase Three-Phase Values for maximum air flow and maximum static pressure are measured by the double-chamber method. Noise level is measured in the A range, at a distance of 3.3 feet from the fan intake side. A thermal protector is installed. If the fan heats up, the thermal protector goes into operation and the fan stops. Once the fan temperature drops, it will automatically restart. Perform inspection work after turning off the power source. Fans bearing the CE mark should only be used with class1equipment. When installing into the equipment, either ground the fan or ensure that there is no contact with bare hands. Standards specifications are listed on page D-2. See page D-4 for VDE certified products. Air Flow Characteristics Audible Noise Frequency Analysis Measure at a distance of 3.3 feet from the fan intake side [r/min] [in H2O] [Pa] Hz 6Hz 5Hz Static Pressure 6Hz Air Flow [m 3 /min] Noise Level(dB) Hz 5Hz K 2K 4K 8K 16K 1/3 Octave Band Center Frequency [Hz] Air Flow [CFM] C ORIENTAL MOTOR GENERAL CATALOG
2 Dimensions Scale1/4, Unit inch (mm) Weight (Mass): 11 lb. (5kg) 4.76 DIA. ( 121) 4.45(113) 8.74(222) (2) 3.94(1).39(1) AIR FLOW 3.27(83) 2.99(76) 8.98(228) 3.66(93) 1.57(4) PROTECTIVE EARTHING TERMINAL M4 8mm PROTECTIVE EARTHING MARK.39 DIA.( 1) UNPAINTED.98 (25) ROTATION (24.5) 8.94(227) 5.2 DIA.( 132) 3.54( 9) 1.18 (3) 3-LEADS 11.81(3) UL Style 3271, AWG2.51(13).28(7) 2.99(76) A 5.2 DIA. ( 132).17DIA ( 4.3) (2).24(6).16(4) C Panel Cut-Out Scale1/4, Unit inch (mm) ( and capacitor cap are provided with the blower.) 3.66(93) B B+.59(15).28(7).39 (1) R.39(1) Intake side Outlet side MB1665-B MB1665-D Dimensions inch (mm) Weight (Mass) A B C oz. (g) CH4CFAUL 2.28 (58) 1.61 (41) 2.28 (58) 6.7 (19) CH8BFAUL 2.28 (58) 1.14 (29) 1.61 (41) 5.3 (15) Wiring Diagrams MB1665-B, D Line Black Red White Accessories (Sold separately) Item Page Mounting PAS5A C-18 MB1665-T U Line V W Black Red White Mounting 2-21 ORIENTAL MOTOR GENERAL CATALOG C-73
3 MB Series AC Centrifugal Blowers Impeller Diameter 4.72 in. dia. ( 12 mm) SAFETY STD. AC INPUT Specifications MB1255-B c Materials Motor Case: Casing: Impeller: Voltage Frequency Current Input Power Max. Air Flow Max. Noise level V Hz A W r/min CFM m 3 /min in H2O Pa db(a) F Single-Phase Single-Phase Single-Phase Aluminum Single-Phase Single-Phase Single-Phase MB1255-D Single-Phase Single-Phase Single-Phase Values for maximum air flow and maximum static pressure are measured by the double-chamber method. Noise level is measured in the A range, at a distance of 3.3 feet from the fan intake side. A thermal protector is installed. If the fan heats up, the thermal protector goes into operation and the fan stops. Once the fan temperature drops, it will automatically restart. Perform inspection work after turning off the power source. Fans bearing the CE mark should only be used with class1equipment. When installing into the equipment, either ground the fan or ensure that there is no contact with bare hands. For protection, use the optional finger guard. Standards specifications are listed on page D-2. See page D-4 for VDE certified products. 1 Air Flow Characteristics Audible Noise Frequency Analysis Measure at a distance of 3.3 feet from the fan intake side [r/min] [in H2O] [Pa] Hz 6Hz 5Hz Static Pressure 6Hz Air Flow [m 3 /min] Noise Level(dB) Hz 5Hz K 2K 4K 8K 16K 1/3 Octave Band Center Frequency [Hz] Air Flow [CFM] C ORIENTAL MOTOR GENERAL CATALOG
4 Dimensions Scale1/4, Unit inch (mm) Weight (Mass): 8.8 lb. (4kg) PROTECTIVE EARTHING MARK.39 DIA.( 1) UNPAINTED.98 (25) PROTECTIVE EARTHING TERMINAL M4 8mm 7.5(179).26(6.5) 2.56(65).8(2) 2.28(58).39(1) 6.85(174) 3.54(9) 3.9(78.5) AIR FLOW 3.35(85) 1.18 (3) 4.2 DIA.( 12) 3.78 DIA.( 96) 6.93(176).59 (15) DIA. ( 84) ROTATION.51(13) 3-LEADS 11.81(3) UL Style 3271, AWG2.71 (18) Panel Cut-Out Scale1/4, Unit inch (mm) 2.3(58.5) ( and capacitor cap are provided with the blower.) A 3.9(78.5) 3.78 DIA. ( 96).17DIA. ( 4.3) (2) B.18(4.5) B+.39(1).39 (1).24(6) Outlet side Intake side.16(4) C MB1255-B MB1255-D CH1CFAUL Dimensions inch (mm) Weight (Mass) A B C oz. (g) 1.89 (48).89 (22.5) 1.24 (31.5) 1.4 (4) CH2BFAUL 1.89 (48).75 (19) 1.14 (29) 1.4 (4) Wiring Diagram Black Red White Line Accessories (Sold separately) Item Page Finger Guard FGB12 C-1 Filter FLB12 C-13 Mounting PAS6A C-18 Duct Joint FD12 C-19 Filter Duct Joint Mounting A finger guard can be installed in place of the filter ORIENTAL MOTOR GENERAL CATALOG C-75
5 MB Series AC Centrifugal Blowers Impeller Diameter 3.94 in. dia. ( 1 mm) SAFETY STD. AC INPUT Specifications MB14-B c Materials Motor Case: Casing: Impeller: Voltage Frequency Current Input Power Max. Air Flow Max. Noise level V Hz A W r/min CFM m 3 /min in H2O Pa db(a) F Single-Phase Single-Phase Single-Phase Aluminum Single-Phase Single-Phase Single-Phase MB14-D Single-Phase Single-Phase Single-Phase Values for maximum air flow and maximum static pressure are measured by the double-chamber method. Noise level is measured in the A range, at a distance of 3.3 feet from the fan intake side. A thermal protector is installed. If the fan heats up, the thermal protector goes into operation and the fan stops. Once the fan temperature drops, it will automatically restart. Perform inspection work after turning off the power source. Fans bearing the CE mark should only be used with class 1 equipment. When installing into the equipment, either ground the fan or ensure that there is no contact with bare hands. For protection, use the optional finger guard. Standards specifications are listed on page D-2. See page D-4 for VDE certified products. 3. Air Flow Characteristics Audible Noise Frequency Analysis Measure at a distance of 3.3 feet from the fan intake side [r/min] 4 35 [in H2O] 1.2 [Pa] Static Pressure 1.2 5Hz 6Hz 5Hz 6Hz Air Flow [m 3 /min] Air Flow [CFM] Noise Level(dB) K 2K 4K 8K 16K 1/3 Octave Band 6Hz 5Hz Center Frequency [Hz] C ORIENTAL MOTOR GENERAL CATALOG
6 Dimensions Scale1/4, Unit inch (mm) Weight (Mass): 4.4 lb. (2kg) PROTECTIVE EARTHING MARK.39 DIA.( 1) UNPAINTED.98 (25) PROTECTIVE EARTHING TERMINAL M4 8mm 1.81 (3) 3.11 DIA.( 79) 5.28(134).18(4.5) 1.97(5).8(2) 1.75(44.5).39(1) 2.72(69) 3.39 DIA ( 86) AIR FLOW 6.14(156) 2.95(75).59 (15) (148) 2.91(74) 2.91 DIA. ( 74) ROTATION.39(1) 3-LEADS 11.81(3) UL Style 3266, AWG2.47 (12) Panel Cut-Out Scale1/4, Unit inch (mm) 1.75(44.5) ( and capacitor cap are provided with the blower.) A 2.72(69) 3.39 DIA. ( 86).17DIA. ( 4.3) (2) B.18(4.5) B+.39(1).39 (1).24(6) Outlet side Intake side.16(4) C MB14-B MB14-D Dimensions inch (mm) Weight (Mass) A B C oz. (g) CH3BFAUL 2.28 (58).83 (21) 1.22 (31) 1.8 (5) CH12BFAUL 1.46 (37).71 (18) 1.6 (27) 1.1 (3) Wiring Diagram Black Red White Line Accessories (Sold separately) Item Page Finger Guard FGB1 C-1 Filter FLB1 C-13 Mounting PAS4B C-18 Duct Joint FD1 C-19 Filter Duct Joint Mounting A finger guard can be installed in place of the filter ORIENTAL MOTOR GENERAL CATALOG C-77
7 MB Series AC Centrifugal Blowers Impeller Diameter 3.15 in. dia. ( 8 mm) SAFETY STD. AC INPUT Specifications MB84-B c Materials Motor Case: Casing: Impeller: Voltage Frequency Current Input Power Max. Air Flow Max. Noise level V Hz A W r/min CFM m 3 /min in H2O Pa db(a) F Single-Phase Single-Phase Single-Phase Aluminum Single-Phase Single-Phase Single-Phase MB84-D Single-Phase Single-Phase Single-Phase Values for maximum air flow and maximum static pressure are measured by the double-chamber method. Noise level is measured in the A range, at a distance of 3.3 feet from the fan intake side. A thermal protector is installed. If the fan heats up, the thermal protector goes into operation and the fan stops. Once the fan temperature drops, it will automatically restart. Perform inspection work after turning off the power source. The MB84 is protected with impedance protection that prevents the temperature from rising to the temperature at which the thermal protector is triggered even if the fan is locked due to the usage voltage or ambient temperature. Fans bearing the CE mark should only be used with class 1 equipment. When installing into the equipment, either ground the fan or ensure that there is no contact with bare hands. For protection, use the optional finger guard. Standards specifications are listed on page D-2. See page D-4 for VDE certified products. 1.5 Air Flow - Characteristics [r/min] [inh2o] [Pa] Hz 1.2 5Hz 6Hz Static Pressure 6Hz Air Flow [m 3 /min] Air Flow [CFM] Audible Noise Frequency Analysis Measure at a distance of 3.3 feet from the fan intake side Noise Level(dB) K 2K 4K 8K 16K 1/3 Octave Band 6Hz 5Hz Center Frequency [Hz] C ORIENTAL MOTOR GENERAL CATALOG
8 Dimensions Scale1/4, Unit inch (mm) Weight (Mass): 2.9 lb. (1.3kg) PROTECTIVE EARTHING MARK.39DIA. UNPAINTED.98 (25) PROTECTIVE EARTHING TERMINAL M4 8mm 4.49(114) 1.97(5) 1.73(44).8(2).39(1) 2.36(6) 4.8(122) 1.81 (3) 3.15DIA.( 8) 2.13 (54) 2.99DIA.( 76) AIR FLOW 5.4(128).55(14) 2.36(6) DIA. ( 64) ROTATION.22.51(13) (5.5) 3-LEADS 11.81(3) UL Style 3266, AWG2.39(1) Panel Cut-Out Scale1/4, Unit inch (mm) 1.73(44) ( and capacitor cap are provided with the blower.) A 2.13(54) 2.99 DIA. ( 76).17DIA. ( 4.3) (2) B.18(4.5) B+.39(1).39 (1).24(6) Outlet side Intake side.16(4) C MB84-B MB84-D CH15FAUL Dimensions inch (mm) Weight (Mass) A B C oz. (g) 1.22 (31).57 (14.5).93 (23.5) 1.2 (35) CH25FAUL 1.22 (31).67 (17) 1.6 (27) 1.4 (4) Wiring Diagram Black Red White Line Accessories (Sold separately) Item Page Finger Guard FGB8 C-1 Filter FLB8 C-13 Mounting PAS4B C-18 Duct Joint FD8 C-19 Filter Duct Joint Mounting A finger guard can be installed in place of the filter ORIENTAL MOTOR GENERAL CATALOG C-79
9 MB Series AC Centrifugal Blowers Impeller Diameter 2.36 in. dia. ( 6 mm) SAFETY STD. AC INPUT Specifications c Materials Motor Case: Casing: Impeller: Voltage Frequency Current Input Power Max. Air Flow Max. Noise level V Hz A W r/min CFM m 3 /min in H2O Pa db(a) Single-Phase MB63-B Single-Phase Single-Phase Single-Phase Single-Phase Single-Phase MB63-D Single-Phase Single-Phase Single-Phase Aluminum Values for maximum air flow and maximum static pressure are measured by the double-chamber method. Noise level is measured in the A range, at a distance of 3.3 feet from the fan intake side. These products are impedance protected. Fans bearing the CE mark should only be used with class1equipment. When installing into the equipment, either ground the fan or ensure that there is no contact with bare hands. Standards specifications are listed on page D-2. Air Flow - Characteristics Audible Noise Frequency Analysis Measure at a distance of 3.3 feet from the fan intake side [r/min] [in H2O] [Pa] Hz 5Hz 6Hz Static Pressure 6Hz Noise Level(dB) Hz 5Hz K 2K 4K 8K 16K 1/3 Octave Band Center Frequency [Hz] Air Flow [m 3 /min] Air Flow [CFM] C ORIENTAL MOTOR GENERAL CATALOG
10 Dimensions Scale1/4, Unit inch (mm) Weight (Mass): 1.1 lb. (.5kg) PROTECTIVE EARTHING MARK.39DIA.( 1) UNPAINTED.59 PROTECTIVE (15) EARTHING TERMINAL M4 8mm (2) 2.36DIA. ( 6) 1.42(36) 2.95(75) 1.57(4) 1.38 (35).4(1).24(6) 1.89DIA. ( 48).35(9).4(1) AIR FLOW 2.64DIA. ( 67) 3.54(9).39(1) 1.57(4) 3.54(9) 1.81(46).31(8) M3P DIA. ( 42).28DIA. ( 7) ROTATION 2-LEADS 11.81(3) UL Style 3266, AWG2 Panel Cut-Out Scale1/4, Unit inch (mm) 1.38 (35) 1.42 (36).14 DIA. 3 HOLES ( 3.5) 1.89 DIA. ( 48) DIA. ( 67) Outlet side Intake side Wiring Diagram Line Accessories (Sold separately) Item Page Mounting PAS2B C-18 Mounting 2-21 ORIENTAL MOTOR GENERAL CATALOG C-81
11 MB Series AC Centrifugal Blowers Impeller Diameter 1.97 in. dia. ( 5 mm) SAFETY STD. AC INPUT Specifications c Materials Motor Case: Casing: Impeller: Voltage Frequency Current Input Power Max. Air Flow Max. Noise level V Hz A W r/min CFM m 3 /min in H2O Pa db(a) Single-Phase MB52-B Single-Phase Single-Phase Single-Phase Single-Phase Single-Phase MB52-D Single-Phase Single-Phase Single-Phase Aluminum Values for maximum air flow and maximum static pressure are measured by the double-chamber method. Noise level is measured in the A range, at a distance of 3.3 feet from the fan intake side. These products are impedance protected. Fans bearing the CE mark should only be used with class1equipment. When installing into the equipment, either ground the fan or ensure that there is no contact with bare hands. Standards specifications are listed on page D-2. Air Flow - Characteristics Audible Noise Frequency Analysis Measure at a distance of 3.3 feet from the fan intake side [r/min] [in H2O] [Pa] Hz 5Hz 6Hz Static Pressure 6Hz Noise Level(dB) Hz 5Hz K 2K 4K 8K 16K 1/3 Octave Band Center Frequency [Hz] Air Flow [m 3 /min] Air Flow [CFM] C ORIENTAL MOTOR GENERAL CATALOG
12 Dimensions Scale1/4, Unit inch (mm) Weight (Mass):.66 lb. (.3kg) PROTECTIVE EARTHING MARK.39DIA. ( 1) UNPAINTED.39(1) PROTECTIVE EARTHING TERMINAL M4 8mm (2) 2.36DIA. ( 6) 2.26(57.5).98 (25) 1.42 (36).2(.5).16(4).81(2.5) 1.57.DIA ( 4).31(8).2(.5) 2.2DIA. ( 56) AIR FLOW 3.7(78) 1.57(4).16(4).31 (8) 1.57(4) 3.7(78) M3P DIA. ( 36).28DIA. ( 7) ROTATION 2-LEADS 11.81(3) UL Style 3266, AWG2 Panel Cut-Out Scale1/4, Unit inch (mm).81(2.5) (36).14 DIA. 3 HOLES ( 3.5) 1.57 DIA. ( 4) 2.2 DIA. ( 56) Outlet side Intake side Wiring Diagram Line Accessories (Sold separately) Item Page Mounting PAS2B C-18 Mounting 2-21 ORIENTAL MOTOR GENERAL CATALOG C-83
Cooling Fans MU Series 119 mm 38 mm Thick ( 4.69 in. 1. in. Thick) Ambient Temperature: 1 + C (+14 +14 F) Operating Voltage Range: ±1% Materials Frame: Die Cast Aluminum Blades: Polycarbonate (Flammability
More informationUS U. Speed Control Motors. Features. Safety Standards and CE Marking M o t o r. Product Number Code
Speed Control Motors US Series The US series combines a speed control motor and a control unit. The capacitor and the potentiometer have been integrated into one compact control unit. The series is designed
More informationReversible Motors. Standard AC Motors. Constant Speed Motors. Standard AC Motors C-75. Reversible Motors
Standard AC Introduction Induction Standard AC Constant Reversible Reversible Reversible Electromagnetic Brake Clutch & Synchronous Brake Low- Synchronous Watertight, Dust-Resistant Torque Gearheads Linear
More informationElectromagnetic. Brake Motors. Constant Speed Motors. Standard AC Motors A-109. Standard AC Motors Introduction. Brake Motors
Standard AC Constant Speed Standard AC Introduction Induction Reversible V Series Clutch & Synchronous Low-Speed Watertight, Synchronous Dust-Resistant Gearheads Page Features and Types of A-11 General
More informationInduction Motors. Standard AC Motors. Constant Speed Motors. Standard AC Motors C-19. Induction Motors
Standard AC Introduction Induction Induction Standard AC Constant Speed Induction Reversible Electromagnetic Brake Clutch & Synchronous Brake Low-Speed Synchronous Watertight, Dust-Resistant Gearheads
More informationRoHS-Compliant. Watertight, Dust-Resistant Motors FPW Series
RoHS-Compliant Watertight, Dust-Resistant s FPW Series 1 RoHS-Compliant Watertight, Dust-Resistant s FPW Series Induction Type The FPW Series are geared motors which conform to the IEC standard IP67 (Recognized
More informationCOMPONENT Type SS21-UL Type
SPEED CONTROL MOTORS COMPONENT Type Type A tachogenerator built into induction motors, in combination with the specially designed control pack, allows multi-functional operation such as speed control,
More informationTorque Motors 3 W, 6 W, 10 W, 20 W
Torque 3 W, 6 W, 1 W, W Connection Information Technical reference Page G-1 Safety standards Page H- Introduction These torque motors conform to safety standards. By providing an external voltage adjustment
More informationProduct Data. FS3QX Slim Line Ducted Fan Coil With Plenum Sizes 018 thru 060 SLIM LINE DUCTED FAN COIL WITH PLENUM ON/OFF DISPLAY TEMP
FS3QX Slim Line Ducted Fan Coil With Plenum Sizes 018 thru 060 Product Data A114 SLIM LINE DUCTED FAN COIL WITH PLENUM Installation Ease S Factory installed 24 volt transformer and relay S High and low
More informationAC centrifugal fan. forward-curved, single-intake with housing (flange)
GE8-AA- ebm-papst Mulfingen GmbH & Co. KG Bachmühle D-767 Mulfingen Phone +9 798 8- Fax +9 798 8- info@de.ebmpapst.com www.ebmpapst.com Limited partnership Headquarters Mulfingen Amtsgericht (court of
More informationUS Series Single-Phase 110/115 VAC Single-Phase 220/230 VAC
RoHS-Compliant Speed Control Motor and Control Unit Package US Series Single-Phase 11/11 VAC Single-Phase 22/23 VAC RoHS-Compliant Speed Control Motor and Control Unit Package US Series Single-Phase 11/11
More informationAC Fans. AC Fans Overview 117. AC Axial Fans 118. AC Radial Fans 138. Technology. DC Axial Fans. DC Radial Fans. Specials. ACmaxx Axial Fans.
4 AC Fans AC Fans Overview 7 AC Axial Fans 8 AC Radial Fans 38 AC Radial Fans AC Axial Fans AC Fans ACmaxx Axial Fans Technology DC Axial Fans Specials DC Radial Fans 5 Accessories AC Fans Technical Informations
More informationAC centrifugal fan. forward-curved, dual-intake with housing (without flange)
DE-AM7-65 ebm-papst Mulfingen GmbH & Co. KG Bachmühle D-767 Mulfingen Phone +9 798 8- Fax +9 798 8- info@de.ebmpapst.com www.ebmpapst.com Limited partnership Headquarters Mulfingen Amtsgericht (court of
More informationCAS 460 2T 7.5. Impeller size motor poles 2=3500 r/min. 60 Hz. Installed power
CAS CAS: High pressure, single inlet centrifugal fans with sheet steel casing and impeller : High pressure, single inlet centrifugal fans with sheet steel casing and impeller, fitted with acoustic attenuators
More informationProduct Data Sheet ACi 4420 MLR
ACi 4420 MLR INDEX 1 General... 3 2 Mechanics... 3 2.1 General... 3 2.2 Connections... 4 3 Operating Data... 5 3.1 Operating Data - Electrical Interface - Input... 5 3.2 Electrical Operating Data... 5
More informationTSAT: Single inlet, belt-driven centrifugal fans fitted with electric motors. CJTSA: Ventilation units with a forward-curved impeller.
TSA TSAT CJTSA TSA: Single inlet, belt-driven centrifugal fans with shaft outlet and forward-curved impeller. TSAT: Single inlet, belt-driven centrifugal fans fitted with electric motors, a set of pulleys
More informationProduct Data Sheet ACi 4420 HHR
ACi 4420 HHR INDEX 1 General... 3 2 Mechanics... 3 2.1 General... 3 2.2 Connections... 4 3 Operating Data... 5 3.1 Operating Data - Electrical Interface - Input... 5 3.2 Electrical Operating Data... 5
More informationHammond Electronic Rack Packaging
Hammond Electronic Rack Packaging 195 1 4-20 spring loaded nuts and 0.62 round head slotted bolts and washers for C channels. Description Net Price l 1421S Pkg. of 4 $14.82 CABLE ORGANIZING RING PANELS
More informationNCF fans 50 Hz. Protection class IP 55
The Nederman NCF Fans have direct drive motors which means a safe and cost effective operation. Installing an energy efficient NCF fan with our other Nederman products saves time and reduces energy costs.
More informationDynamically-balanced impellers with extremely robust cores CMP T 5.5
Medium pressure, single inlet centrifugal fans with sheet steel casing and impeller Fan: Sheet steel casing. Forward-curved impeller made of galvanised sheet steel. 38-2M model casing in cast aluminium.
More informationProvided Capacitor E: Single-Phase 220V/230V. Motor
Standard AC Motor Type MSSW Series This is unit products which is combined a compact speed control pack and W-9W speed control motor. The gearhead shown in the photograph is sold separately. Product Number
More informationAC centrifugal module - RadiCal
KE5-RA- ebm-papst Mulfingen GmbH & Co. KG Bachmühle D-767 Mulfingen Phone +9 798 8- Fax +9 798 8- info@de.ebmpapst.com www.ebmpapst.com Limited partnership Headquarters Mulfingen Amtsgericht (court of
More informationSUNON SPECIFICATION FOR APPROVAL DESCRIPTION : DC BRUSHLESS FAN. DIMENSIONS : 120X120X25 mm M O D E L : KD2412PTB1-6A
SUNON SPECIFICATION FOR APPROVAL CUSTOMER : DESCRIPTION : DC BRUSHLESS FAN DIMENSIONS : 120X120X25 mm M O D E L : KD2412PTB1-6A APPROVED NO : APPROVED BY : (AUTHORIZED) SPEC.NO D120012 DAWN. ISSUE DATE
More informationProduct Data Sheet 4118 N/ The engineer's choice
The engineer's choice 4118 N/12-190 INDEX 1 General... 3 2 Mechanics... 3 2.1 General... 3 2.2 Connections... 3 3 Operating Data... 4 3.1 Electrical Operating Data... 4 3.2 Operating Data - Electrical
More informationConforms to Power Supply Voltages in Asia Induction Motors, Reversible Motors, and Electromagnetic Brake Motors
RoHS Directive-Compliant Standard AC Motors World K Series Conforms to Power Supply Voltages in Asia Induction Motors, Reversible Motors, and Electromagnetic Brake Motors New products that conform to power
More informationSUNON SPECIFICATION FOR APPROVAL DESCRIPTION : DC BRUSHLESS BLOWER. DIMENSIONS : 45X45X9 mm M O D E L : GB0545AFV1-8
SPECIFICATION FOR APPROVAL CUSTOMER : DESCRIPTION : DC BRUSHLESS BLOWER DIMENSIONS : 45X45X9 mm M O D E L : GB0545AFV1-8 APPROVED NO : APPROVED BY : (AUTHORIZED) SPEC. NO. B450068 ISSUE DATE 01.20.2000
More informationAC centrifugal fan with housing (small flange)
DE-HT- ebm-papst Mulfingen GmbH & Co. KG Bachmühle Mulfingen Phone: + - Fax: + - www.ebmpapst.com info@de.ebmpapst.com Nominal data Type Motor DE-HT- ME-EC Phase ~ ~ Nominal voltage [V] Frequency [Hz]
More informationPSC Thermal Solutions. size 273 x 220 x202mm
Impeller: PP UL94V-O Reinforced Plastic(f1) Connector:AMP 350781-1 Motor: Capacitor-Run Inductionexternal rotor Motor Insulation:Class B T.P.F. Safety: UL. CE.CUL Operation Temperature:-10 ~+70 size 273
More informationSpecifications. Applications Ventilation of safety cabinets (STORM 10), scrubbers, fume capture arms, filter housing, etc. (STORM 12, 14, 16).
Specifications Applications Ventilation of safety cabinets (STORM 10), scrubbers, fume capture arms, filter housing, etc. (STORM 12, 14, 16). Housings: PP* Single block strong high density UV treated and
More informationProduct Data Sheet 4184 NXHH
The engineer's choice 4184 NXHH INDEX 1 General... 3 2 Mechanics... 3 2.1 General... 3 2.2 Connections... 3 3 Operating Data... 5 3.1 Operating Data - Electrical Interface - Input... 5 3.2 Electrical Operating
More informationProduct Data Sheet DV5214 NU
The engineer's choice DV5214 NU INDEX 1 General... 3 2 Mechanics... 3 2.1 General... 3 2.2 Connections... 3 3 Operating Data... 4 3.1 Operating Data - Electrical Interface - Input... 4 3.2 Electrical Operating
More informationNALSRF BELT DRIVE ACOUSTIC SINGLE EXTERNAL ROOF FANS
NALSRF BELT DRIVE ACOUSTIC SINGLE EXTERNAL ROOF FANS External roof mounted single fan unit manufactured from aluzinc. 7.111 +44 (0) 29 2085 8515 BENEFITS Hard wearing on site External single fan unit manufactured
More informationProduct Data Sheet 624 NR. The engineer's choice
Product Data Sheet 624 NR Product Data Sheet 624 NR The engineer's choice Product Data Sheet 624 NR 624 NR INDEX 1 General... 3 2 Mechanics... 3 2.1 General... 3 2.2 Connections... 3 3 Operating Data...
More informationProduct Data Sheet 3214 JH3-195
3214 JH3-195 INDEX 1 General... 3 2 Mechanics... 3 2.1 General... 3 2.2 Connections... 3 3 Operating Data... 5 3.1 Operating Data - Electrical Interface - Input... 5 3.2 Electrical Operating Data... 6
More informationPERFORMANCE SPECIFICATIONS SINGLE-SPEED, 110 CFM VENTILATION FAN
PERFORMANCE SPECIFICATIONS SINGLE-SPEED, 110 CFM VENTILATION FAN HVI PERFORMANCE ELECTRICAL & WEIGHT 6" Duct 0.1 Ps - Static Pressure (inh2o) 0.25 Ps Sound (Sones) Power (Watts) Efficacy (CFM/Watt) Volts
More informationWOB-L. PISTON Pumps and Compressors. 607/668/669/688/689 Series MODELS:
WOB-L PISTON Pumps and Compressors 607/668/669/688/689 Series MODELS: Standard models available. 607CA22, 607CA32, 607CD22, 607CD32 668CE44, 668CGHI44 688CE44, 688CGHI44 669CE44, 669CHGI44 689CE44, 689CGHI44
More informationProduct Data Sheet 4184 NXHH
The engineer's choice 4184 NXHH INDEX 1 General... 3 2 Mechanics... 3 2.1 General... 3 2.2 Connections... 3 3 Operating Data... 4 3.1 Operating Data - Electrical Interface - Input... 4 3.2 Electrical Operating
More informationProduct Data Sheet 8412 N/ The engineer's choice
The engineer's choice 8412 N/12-252 INDEX 1 General... 3 2 Mechanics... 3 2.1 General... 3 2.2 Connections... 3 3 Operating Data... 4 3.1 Electrical Operating Data... 4 3.2 Electrical Interface - Output...
More informationProduct Data Sheet 4184 NGX
The engineer's choice 4184 NGX INDEX 1 General... 3 2 Mechanics... 3 2.1 General... 3 2.2 Connections... 3 3 Operating Data... 4 3.1 Operating Data - Electrical Interface - Input... 4 3.2 Electrical Operating
More informationAC axial fan. blades with special design (K series) with guard grille for full nozzle
SE6-EC-5 ebm-papst Mulfingen GmbH & Co. KG Bachmühle D-767 Mulfingen Phone +9 798 8- Fax +9 798 8- info@de.ebmpapst.com www.ebmpapst.com Limited partnership Headquarters Mulfingen County court Stuttgart
More informationVHIA High-Static Ducted Indoor Units - 60HZ
PRODUCT SPECIFICATIONS Compact design for limited space requirements. Installs out of sight between the drop ceiling and ceiling slab with ducted distribution to the indoor space. All models have three-stage
More informationProduct Data Sheet DV4118 N
The engineer's choice DV4118 N INDEX 1 General... 3 2 Mechanics... 3 2.1 General... 3 2.2 Connections... 3 3 Operating Data... 5 3.1 Operating Data - Electrical Interface - Input... 5 3.2 Electrical Operating
More informationSUNON SPECIFICATION FOR APPROVAL DESCRIPTION : DC BRUSHLESS FAN. DIMENSIONS : 92X92X25 mm M O D E L : KD1209PTB1 P/N : (2).H
SUNON SPECIFICATION FOR APPROVAL CUSTOMER : DESCRIPTION : DC BRUSHLESS FAN DIMENSIONS : 92X92X25 mm M O D E L : KD1209PTB1 APPROVED NO : APPROVED BY : (AUTHORIZED) SPEC.NO D920849 ISSUE DATE 08.21.2000
More informationV33B High Efficiency 360 Cassette Indoor Models - 60HZ
PRODUCT SPECIFICATIONS Low-sound, high efficiency cassette, encased in galvanized steel offers 360 airflow for immediate, equal distribution of wide-range cooling and heating. Cassette has motor-driven
More informationTechnical Service Manual. TVR LX Systems Medium Static Pressure Duct Units with DC Fan Motor V/50-60Hz/1ph
Technical Service Manual TVR LX Systems Medium Static Pressure Duct Units with DC Fan Motor 220-240V/50-60Hz/1ph August 20 Medium Static Pressure Duct Unit With DC Fan Motor 1. Features...2 2. Specifications...4
More informationPlate mounted axial flow fans HXBR / HXTR Series
Plate mounted axial flow fans manufactured from high grade galvanised steel and provided with a Sickle blade impeller, low sound level, protected against corrosion by cataforesis primer and a polyester
More informationProduct Data Sheet 4184 N/17X. The engineer's choice
Product Data Sheet 4184 N/17X The engineer's choice 4184 N/17X INDEX 1 General... 3 2 Mechanics... 3 2.1 General... 3 2.2 Connections... 3 3 Operating Data... 4 3.1 Electrical Operating Data... 4 3.2 Electrical
More informationVMDA Concealed Medium Static Ducted Indoor Models - 60HZ
VARIABLE REFRIGERANT FLOW SYSTEMS VRF VMDA Concealed Medium Static Ducted Indoor Models - 60HZ PRODUCT ECIFICATIONS Slim, compact design for limited space requirements. Installs out of sight between the
More informationProduct Data Sheet 4414/2H
The engineer's choice 4414/2H INDEX 1 General... 3 2 Mechanics... 3 2.1 General... 3 2.2 Connections... 3 3 Operating Data... 4 3.1 Operating Data - Electrical Interface - Input... 4 3.2 Electrical Operating
More informationCentrifugal Inline Fans Models SQ-M and BSQ-M. Direct and Belt Drive
Centrifugal Inline s Models SQ-M and BSQ-M Direct and Belt Drive July 2010 Centrifugal Inline Duct s Greenheck's model SQ-M and BSQ-M centrifugal square inline fans feature a unique combination of installation
More informationLow Static Pressure Duct(V shape evaporator)
Low Static Pressure Duct (V shape evaporator) 1. Features... 116 2. Specifications... 118 3. Dimensions... 121 4. Service Spaces... 123 5. Piping Diagrams... 124 7.Fan Performance... 126 8.Capacity Tables...
More informationProduct Data Sheet 8412 NHU-519
The engineer's choice 8412 NHU-519 INDEX 1 General... 3 2 Mechanics... 3 2.1 General... 3 2.2 Connections... 3 3 Operating Data... 4 3.1 Operating Data - Electrical Interface - Input... 4 3.2 Electrical
More informationProduct Data Sheet 614 N/2HH-169 The engineer's choice
The engineer's choice 614 N/2HH-169 INDEX 1 General... 3 2 Mechanics... 3 2.1 General... 3 2.2 Connections... 3 3 Operating Data... 4 3.1 Electrical Operating Data... 4 3.2 Operating Data - Electrical
More informationC B Motors CB I W U. Clutch and Brake Motors. Features. Product Number Code. Construction A ORIENTAL MOTOR GENERAL CATALOG
lutch and Brake s B s This compact precision motor is equipped with an internal clutch and brake for use with a gearhead. The combination makes it the ideal motor for uses involving frequent START/STOP
More informationProduct Data Sheet 632 NU-006
The engineer's choice 632 NU-006 INDEX 1 General... 3 2 Mechanics... 3 2.1 General... 3 2.2 Connections... 3 3 Operating Data... 4 3.1 Operating Data - Electrical Interface - Input... 4 3.2 Electrical
More informationProduct Data Sheet 3214 J/2H3F-191
The engineer's choice 3214 J/2H3F-191 INDEX 1 General... 3 2 Mechanics... 3 2.1 General... 3 2.2 Connections... 3 3 Operating Data... 4 3.1 Operating Data - Electrical Interface - Input... 4 3.2 Electrical
More informationInside Front cover White
TUBE FAN Inside Front cover White INDEX INTRODUCTION PERFORMANCE GRAPHS TECHNICAL DATA DIMENSIONS pages - 3 - ACOUSTIC DATA - SOUND PRESSURE LEVEL ELECTRICAL DETAILS 3 4 Index back side white Introduction
More informationMultifunctional roof fans for large flows. Multifunctional roof fans, highly robust construction, for large flows
HTMH Multifunctional roof fans for large flows Multifunctional roof fans, highly robust construction, for large flows Fan: Painted galvanised sheet steel base plate Turnable impellers cast aluminium. Protection
More informationService manual MIV V4+ Indoor units
Service manual MIV V4+ Indoor units Floor Standing MVF22A-VA1 MVF28A-VA1 MVF36A-VA1 MV5A-VA1 MVF56A-VA1 MVF71A-VA1 MVF80A-VA1 MVB22A-VA1 MVB28A-VA1 MVB36A-VA1 MVB45A-VA1 MVB56A-VA1 MVB71A-VA1 MVB80A-VA1
More informationproduct specification
4414 ML Customer specification: No Version: 1.0 Created: 16.09.2011 INDEX 1 General... 2 2 Mechanics... 2 2.1 GENERAL... 2 2.2 MOTOR... 2 2.3 CONNECTIONS... 3 3 Operating Data... 4 3.1 OPERATING DATA -
More informationCSXRT: Single inlet, belt-driven centrifugal fans fitted with electric motors. CJSXR: Ventilation units with a backward-curved impeller
CSXR CSXRT CJSXR CSXR: Belt-driven single inlet centrifugal fans with shaft outlet and backward-curved impeller CSXRT: Belt-driven single inlet centrifugal fans fitted with electric motors, a set of pulleys
More informationVMDB Concealed Medium Static Ducted Indoor Models - 60HZ
VARIABLE REFRIGERANT FLOW SYSTEMS VRF VMDB Concealed Medium Static Ducted Indoor Models - 60HZ PRODUCT ECIFICATIONS Bulletin No. 210711 March 2018 Slim, compact design for limited space requirements. Installs
More informationSeries VENTS KSK. Centrifugal kitchen fan in sound-insulated casing with air flow up to 8138 m 3 /h
SOUND-INSULATED KITCHEN FAN Series device. The impeller is mounted on the motor shaft and is balanced statically and dynamically. The motor has F class motor winding insulation and ingress protection rating.
More informationSUNON SPECIFICATION FOR APPROVAL DESCRIPTION : DC BRUSHLESS FAN. DIMENSIONS : 40X40X10 mm M O D E L : KD1204PFS2-8
SPECIFICATION FOR APPROVAL CUSTOMER : DESCRIPTION : DC BRUSHLESS FAN DIMENSIONS : 40X40X10 mm M O D E L : KD1204PFS2-8 APPROVED NO : APPROVED BY : (AUTHORIZED) SPEC.NO D400007 ISSUE DATE 07.06.1999 DAWN.
More informationMODEL KSF BELT DRIVE CENTRIFUGAL FILTERED ROOF SUPPLY FAN
R MODEL BELT DRIVE CENTRIFUGAL FILTERED ROOF SUPPLY FAN APPLICATION s fans are primarily used for filtered make-up air in kitchen hood applications but may also be specified for make-up air in commercial
More informationProduct Data Sheet 8414 NGH
The engineer's choice 8414 NGH INDEX 1 General... 3 2 Mechanics... 3 2.1 General... 3 2.2 Connections... 3 3 Operating Data... 4 3.1 Operating Data - Electrical Interface - Input... 4 3.2 Electrical Operating
More information400ºC/2h centrifugal roof fans with horizontal or vertical air outlet CHT 200 4T BS. Installed capacity
400ºC/2h centrifugal roof fans with horizontal or vertical air outlet : 400ºC/2h centrifugal roof fans with horizontal air outlet, hood in aluminium : 400ºC/2h centrifugal roof fans with vertical air outlet,
More informationService Manual. Frequency (Hz) Noise (sones) < <0.3
PEG1312056CE Service Manual Version:1501 Ventilating Fan (North America Market) Model No. Duct diameter (inches) Air direction Voltage (V) Frequency (Hz) Noise (sones) Power consumption (W) Speed (r/min)
More informationROOF FAN ROOFMASTER STEC NON-INSULATED VERSION TECHNICAL CATALOGUE
ROOF FAN ROOFMASTER STEC NON-INSULATED VERSION TECHNICAL CATALOGUE Roofmaster STEC non-insulated version - Technical Catalogue 3 CONTENTS GENERAL DESCRIPTION Application/specification...4 Features...4
More informationAC axial fans, AC diagonal fans
fans, C diagonal fans Technology ccessories EC-SYSTEMS ESM General information K series Q-motor EC axial EC axial fans series fans fans Ø 130 - Ø 250 14 C diagonal fans Ø 208 20 13 Contacts fans Ø 130
More informationMAX FLUID TEMPERATURE
Operation is similar to standard centrifugal pumps, except the impeller is driven with a magnetic coupling, eliminating the need for a shaft seal. Magnetic drive pumps must be used where flooded suction
More informationFBA08A (80 X 25.5 L )
FBA08A (80 X 25.5 L ) EMINEBEA.COM Allowable Ambient Temperature Range: -10 C ~ +70 C (65%RH) (Operating) -40 C ~ +75 C (65%RH) (Operating) (non-condensing environment) Failure Rate: 10% 50,000 Hours (40
More informationAC centrifugal fan. backward curved
RE-AB6- ebm-papst Mulfingen GmbH & Co. KG Bachmühle D-767 Mulfingen Phone +9 798 8- Fax +9 798 8- info@de.ebmpapst.com www.ebmpapst.com Limited partnership Headquarters Mulfingen County court Stuttgart
More informationEnergy-saving motors (ESM)
Energy-saving motors (ESM) Technology Accessories EC-SYSTEMS ESM General information K series Q-motor EC axial EC axial fans A series fans Energy-saving motors (ESM) 316 Air performance curves 3 Energy-saving
More informationVWMB Wall-Mounted Non-Ducted Indoor Models - 60HZ
PRODUCT SPECIFICATIONS VARIABLE REFRIGERANT FLOW SYSTEMS VRF VWMB Wall-Mounted Non-Ducted Indoor Models - 60HZ Bulletin No. 210712 March 2018 Low-sound, three-speed Wall Mount with LED display offers three
More informationMODEL KSF BELT DRIVE CENTRIFUGAL FILTERED ROOF SUPPLY FAN
R BELT DRIVE CENTRIFUGAL FILTERED ROOF SUPPLY FAN APPLICATION s fans are primarily used for filtered make-up air in kitchen hood applications but may also be specified for make-up air in commercial and
More informationAC axial fan. sickled blades (S series), single inlet Wall ring with guard grille
WE5-CO5-66 ebm-papst Mulfingen GmbH & Co. KG Bachmühle D-767 Mulfingen Phone +9 798 8- Fax +9 798 8- info@de.ebmpapst.com www.ebmpapst.com Limited partnership Headquarters Mulfingen County court Stuttgart
More informationV33A Standard/High Efficiency 360 Cassette Indoor Models - 60HZ
PRODUCT SPECIFICATIONS Low-sound, standard or high efficiency cassette, encased in galvanized steel offers 360 airflow for immediate, equal distribution of wide-range cooling and heating. Cassette has
More informationCUSTOMER: MODEL NO: 4020III (CeraDyna Fan) PART NO: FD1240-A0241D0AL DATE: CUSTOMER APPROVAL. Taiwan. Approved QC Checked Checked Prepared
CUSTOMER: MODEL NO: 4020III (CeraDyna Fan) PART NO: FD1240-A0241D0AL DATE: 2013.08.28 CUSTOMER APPROVAL Taiwan ACT-RX TECHNOLOGY CORPORATION TEL: 886-2-82421111 2F, No.192, Lian Cheng Road, Zhonghe Dist.,
More informationFCVC Series VERTICAL FAN COILS
VERTICAL FAN COILS The FCVC is designed for concealed, wall mounted installations with flexible heating/ cooling loads and minimal duct requirements. With a variety of options, such as fiber free insulation,
More informationHigh Capacity Ventilation
High Capacity Ventilation DECEMBER 2012 Broan high capacity fans are an exceptionally quiet solution to continuous ventilation. With their heavy-duty motors, high capacity fans are an ideal solution for
More informationThe Straight Way. Rectangular Cabinet Fan. Fans Air Handling Units Air Distribution Products Fire Safety Air Curtains and heating Products Tunnel Fans
Fans Air Handling Units Air Distribution Products Fire Safety Air Curtains and heating Products Tunnel Fans The Straight Way Rectangular Cabinet Fan Systemair India Pvt. Ltd. certifies that the Rectangular
More informationLow Static Pressure Duct (V shape evaporator)
MCAC-VTSM-2015-04 Low Static Pressure Duct Type Low Static Pressure Duct (V shape evaporator) 1. Features... 100 2. Specifications... 101 3. Dimensions... 105 4.Service Spaces... 106 5.Piping Diagrams...
More informationMODEL FF/FFC CEILING AND INLINE/CABINET VENTILATORS
MODEL FF/FFC CEILING AND INLINE/CABINET VENTILATORS APPLICATION The extremely quiet FF and FFC ventilators are used to exhaust air from a variety of commercial and institutional applications, such as restrooms,
More informationAC axial fan. sickled blades (S series) Wall ring with guard grille
W4E3-DN2-39 ebm-papst Mulfingen GmbH & Co. KG Bachmühle 2 D-74673 Mulfingen Phone +49 7938 81- Fax +49 7938 81-11 info1@de.ebmpapst.com www.ebmpapst.com Limited partnership Headquarters Mulfingen County
More informationWatertight, Dust-Resistant. Motors. Standard AC Motors A-207. Standard AC Motors Intro duction. Motors. AC Speed Control Motors Inverter.
Standard AC Standard AC Intro duction Induction Reversible Electromagnetic Brake Right-Angle Gearheads SB5W US ES2 FE1/FE2 AC Speed Control Inverter Torque Accessories Installation A-27 Standard AC RoHS-Compliant
More informationSINGLE STAGE TWO STAGES
BLOWERS CATALOG Table of contents SINGLE STAGE TWO STAGES 3 4 1 1 5 6 7 8 9 10 11 12 Weight (Kg) 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 2RSC 50-65 Performance curve for Vacuum
More informationAC Motor Systems US Series
US Series The US Series combines a control unit and an AC speed control motor. Connection between the motor and control unit is simplified by an easy-to-use connector. The US Series is designed for applications
More informationProduct Data. FFMA Base Series Fan Coil Sizes 018 thru 037 FEATURES
FFMA Base Series Fan Coil Sizes 018 thru 037 Product Data A13417 FEATURES The FFMA Series Fan Coil unit is primarily designed for apartment applications as an upflow only indoor fan coil for split -system
More informationVertical Air Handling Unit type
Vertical Air Handling Unit type Engineering Databook MMD-AP0120VHG2UL MMD-AP0180VHG2UL MMD-AP0240VHG2UL MMD-AP0300VHG2UL MMD-AP0360VHG2UL MMD-AP0420VHG2UL MMD-AP0480VHG2UL MMD-AP0600VHG2UL Contents 1.
More informationAC Line / Load Reactors
AC Line / Load Reactors Table of Contents Delivery / Lead Time.PB03-1100 -2 Selection & Pricing PB03-1100 -4 Replacement Parts..PB03-1100-8 Product Modifications / Options..PB03-1100 -9 Product Specifications..PB03-1100
More informationHIGH-POWERED VENTILATORS
HIGH-POWERED VENTILATORS WITH ROOF FANS 400ºC/2h The THT/HATCH series was designed using high-powered ventilator technology for smoke extraction in the event of a fire, and is equipped with THT series
More informationProduct Data FFMA BASE SERIES FAN COIL SIZES 018 TO 037 FEATURES
FFMA BASE SERIES FAN COIL SIZES 018 TO 037 Product Data A13417 FEATURES The FFMA Series Fan Coil unit is primarily designed for apartment applications as an upflow only indoor fan coil for split- system
More informationMODEL FF/FFC CEILING AND INLINE/CABINET VENTILATORS
R MODEL FF/FFC CEILING AND INLINE/CABINET VENTILATORS APPLICATION The extremely quiet FF and FFC ventilators are used to exhaust air from a variety of commercial and institutional applications, such as
More information500-YH SINGLE DUCT AIR TERMINAL UNIT FORM EG1 (1101)
500-YH SINGLE DUCT AIR TERMINAL UNIT FORM 130.12-EG1 (1101) Table of Contents General Description.......................................................................3 500-YH Features........................................................................4-5
More informationProduct Data. CFM (L/s) Dimensions. Filter Size Ship Wt. H x W x D in. (mm) FMA4P1800AL 1 1/2 18, (212) 675 (319) 36 1/2 x 20 1/2 x 15
Product Data FMA4X, FMA4P APARTMENT FAN COIL UNIT 1 1/2 TONS THROUGH 3 TONS APARTMENT FAN COILS ALL MODELS 1 1/2, 2, 2 1/2, and 3 Tons Upflow application only Accessory field installed electric heat kits
More informationSquare Duct Fans - ESTOC Range. Estoc Features. Electrical Supply. Product Code. Sizes 355, 400, 450, 500, 560, 630 and 710.
Square Duct Fans - ESTOC Range Features Sizes from 355 to 71 mm diameter Air flow 1,9 m 3 /h (5.2 m 3 /s) Static pressures up to 115 Pa Maximum temperature from +4 C to +7` C (depending on the model) Adjustable
More informationCUSTOMER: MODEL NO: 4020II (CeraDyna Fan) NO: FD2440-C0151D2AL. DATE : September 3, 2007 CUSTOMER APPROVAL
CUSTOMER: MODEL NO: 4020II (CeraDyna Fan) PART NO: FD2440-C0151D2AL DATE : September 3, 2007 CUSTOMER APPROVAL Taiwan TEL: 886-2-82421111 2F, No. 192, Lien Chen Road, Chung Ho City, FAX: 886-2-82452200
More informationTECHNICAL GUIDELINE. Medium Voltage Conductor Ampacities ALUMINUM COPPER. Single Conductor 5kV - 35kV
Medium Voltage Ampacities Single 5kV - 35kV 2 130 145 150 165 2 100 115 115 130 1 155 175 170 190 1 120 135 130 150 1/0 180 200 195 215 1/0 140 155 150 170 2/0 205 225 225 255 2/0 160 175 175 200 3/0 240
More informationEngineering Data Book
40VMM Medium Static Duct Indoor Unit for Variable Refrigerant Flow (VRF) Systems Engineering Data Book Manufacturer reserves the right to discontinue, or change at any time, specifications or designs without
More information