Product Data Sheet 3214 J/2H3F-191

Transcription

1 The engineer's choice

2 3214 J/2H3F-191 INDEX 1 General Mechanics General Connections Operating Data Operating Data - Electrical Interface - Input Electrical Operating Data Operating Data - Electrical Interface -Output Electrical Features Aerodynamic Sound Data Environment General Climatic requirements*) Safety Electrical Safety Approval Tests Reliability General /7/2012 page 2 of 11

3 1 General Fan type Rotational direction looking at rotor Airflow direction Bearing system Mounting position Fan clockwise Air outlet over struts Ball bearing any 2 Mechanics 2.1 General Width Height Depth Weight Housing material Impeller material Max. torque when mounted across both mounting flanges Screw size 92,0 mm 92,0 mm 38,0 mm 0,240 kg Plastic Plastic wire outlet corner: 30 Ncm remaining corners: 30 Ncm ISO M4 degreased, without an additional brace and without washer 2.2 Connections Electrical connection Wires Length of lead wire 310 mm Wire gauge (AWG) 24 Insulation diameter 1,55 mm Contact see drawing +- 10,0 mm Colour Operation Wire 1 red + UB Wire 2 blue - GND Wire 3 violet FREQ Wire 4 white Tacho The auxilliaries shown on the schematic diagram (which are required for the intended use) are not part of our delivery. 5/7/2012 page 3 of 11

4 3 Operating Data 3.1 Operating Data - Electrical Interface - Input Control input Features Inpute type Input frequency range TTL 116 Hz Hz Characteristics Attention: Important information to the speed control! Hz; TTL Logik; /min 0 Hz Hz -> not permitted, because: 0 Hz (high level), 0 1/min and 0 Hz (low level), /min 5/7/2012 page 4 of 11

5 3.2 Electrical Operating Data Measurement conditions: Normal air density = 1,2 kg/m3; Temperature 23 C +/- 3 C; Motor axis horizontal;warm-up time before measuring 5 minutes (unless otherwise specified).in the intake and outlet area should not be any solid obstruction within 0,5 m. p = 0: corresp. to free air flow (see section 3.5) I: corresp. to arithm. mean current value Name 0001 Condition : 350 Hz Features Condition Symbol Values Voltage range p = 0 U 20,0 V 26,0 V Nominal voltage p = 0 U N 24,0 V Power consumption p = 0 20,0 W 28,3 W 31,2 W +- 18,0 % +- 25,0 % +- 25,0 % P 0001 Current consumption p = ma ma ma +- 18,0 % +- 25,0 % +- 25,0 % I 0001 Speed p = /min /min /min Starting current consumption 0001 n +- 13,0 % +- 3,0 % +- 3,0 % <= ma Name 0002 Condition : 116 Hz Features Condition Symbol Values Voltage range p = 0 U 20,0 V 26,0 V Nominal voltage p = 0 U N 24,0 V Power consumption p = 0 3,4 W 3,8 W 4,2 W +- 25,0 % +- 25,0 % +- 25,0 % P 0002 Current consumption p = ma 160 ma 160 ma +- 25,0 % +- 25,0 % +- 25,0 % I 0002 Speed p = /min /min /min 0002 n +- 3,0 % +- 3,0 % +- 3,0 % 5/7/2012 page 5 of 11

6 3.3 Operating Data - Electrical Interface -Output Tacho type /2 (Open collector) Features Note Values Tacho operating voltage (UBS) <= 60,0 V Tacho signal Low I sink: 2 ma <= 0,4 V Tacho signal High I source: 0 ma 60 V Maximum sink current <= 4 ma External resistor External resistor Ra from UBS to US required. All voltages measured to GND. Tacho frequency (2 x n) / 60 Tacho isolated from motor No Slew rate => 0,5 V/us Alarm type 5/7/2012 page 6 of 11

7 3.4 Electrical Features Electronic function Reversed polarity protection Max. residual current at Un Locked rotor protection Locked rotor current at Un Clock signal t3/t4 at locked rotor Speed-Controlled Auto restart approx ma Typical: 0,3 s / 10,0 s 5/7/2012 page 7 of 11

8 3.5 Aerodynamic Measurement conditions: Measured with a double chamber intake rig acc. to DIN EN ISO Normal air density = 1,2 kg/m3; Temperature 23 C +/- 3 C; In the intake and outlet area should not be any solid obstruction within 0,5 m. a.) Operation condition: /min at free air flow : 350Hz Max. free-air flow ( p = 0 / = max.) 230,0 m3/h Max. static pressure ( p = max. / =0) 615 Pa 5/7/2012 page 8 of 11

9 3.6 Sound Data Measurement conditions: Sound pressure level: 1 Meter distance between microphone and the air intake. Sound power level: Acc. to DIN part 38 (ISO 10302) Measured in a semianchoic chamber with a background noise level of Lp(A) < 5 db(a) For further measurement conditions see section 3.5 a.) Operation condition: /min at free air flow : 350Hz Optimal operating point Sound power level at the optimal operating point Sound pressure level at free air flow, measured in rubber bands 150,0 224 Pa 7,5 bel(a) 66,0 db(a) 4 Environment 4.1 General Min. permitted ambient temperature TU min. -20 C Max. permitted ambient temperature TU max. 55 C Min. permitted storage temperature TL min. -40 C Max. permitted storage temperature TL max. 80 C 4.2 Climatic requirements*) Humidity requirements humid heat, constant; according to DIN EN , 14 days Water exposure Radiation exposure Dust requirements Salt fog requirements Harmful gas requirements *) Permittet application area: The product is intended for use in sheltered rooms with controlled temperature and controlled humidity. Directly exposure to water must be avoided. Pollution degree 1 (according DIN EN ) There is either no pollution or it occurs only dry, non-conductive pollution. The pollution has no negative impact.please require severity levels and specification parameters from the responsible development departments 5/7/2012 page 9 of 11

10 5 Safety 5.1 Electrical Safety Dielectric strength DIN EN (VDE 0805) and DIN EN (VDE 0700) A.) Type test Measuring conditions: After 48h of storage at 95% R.H. and 25 C. No arcing or breakdown is allowed! All connections together to ground. B.) Routine test Measuring conditions: At indoor climate. No arcing or breakdown is allowed! All connections together to ground. Isolation resistance Measuring conditions: After 48h of storage at 95% R.H. and 25 C measured with U=500 VDC for 1 min. Air and leakage distances Protection class 500 VAC / 1 Min. 500 VAC / 1 Sec. RI > 10 MOhm 1,0 mm / 1,2 mm III 5.2 Approval Tests CE UL VDE CSA CCC Yes Yes / UL507, Electric Fans No Yes / CSA audited by UL according to C22.2 No. 113 Fans and Ventilators No The approval tests are observed to: Maximal permitted operating voltage (see section 3.1) and max. permitted ambient temperature TU max. 6 Reliability 6.1 General Life expectancy L10 at TU = 40 C Life expectancy L10 at TU max h h 5/7/2012 page 10 of 11

11

12 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: ebm-papst: 3214J/2H3F-191