Plate mounted axial flow fans HXBR / HXTR Series
|
|
- Marcia Tamsin Gallagher
- 6 years ago
- Views:
Transcription
1 Plate mounted axial flow fans manufactured from high grade galvanised steel and provided with a Sickle blade impeller, low sound level, protected against corrosion by cataforesis primer and a polyester black paint finish (1), single phase external rotor motor (HXBR) or three phase motor (HXTR), IP44 (models 25 to 355) or IP54 (models 4 to 8), Class F, equipped with thermal protection and terminal box with capacitor incorporated in single phase models. (1) Model 8: impeller motor unpainted. Motors Available in 2, 4, 6, 8 or poles, depending on versions. Electrical supplies: Single phase 23V5Hz Three phase 4V5Hz 23/4V5Hz (models 25) Three phase motors suitable for inverter control. (See characteristics chart). Additional information Standard air direction: form (A) configuration (motor over impeller). On request Three phase motors 23/4V5Hz. Compact design This very low profile design optimises airflow performances whilst minimising noise generation. Corrosion resistance Mounting plate, motor support and finger proof guard protected by cataforesis primer and black polyester paint finish. Stainless steel screws. Terminal box Capacitor incorporated in single phase models. High efficiency Sickle blade impeller Designed to ensure the highest and most efficient airflow performance with the lowest noise level. Dynamically balanced to ISO 194 standard. Manufactured from aluminium plate; Ø 25 to 355 models which are manufactured from pressed sheet steel. 54
2 Technical characteristics Before installation check that the product electrical characteristics listed on the data plate label (voltage, power, frequency, etc.) match those of the intended electrical supply. Model Speed (rpm) Voltage Maximum absorbed power (W) Maximum current (A) Sound pressure level* (db(a)) Maximum airflow (m 3 /h) Operating temperature range ( C) Weight (kg) Speed controller Variable frequency inverter to 23 V to 4 V Min. Max. REB RMB/T VFTM VFKB SINGLE PHASE 2 POLE HXBR/ V 5Hz 8, REB1 RMB1,5 HXBR/ V 5Hz 4, REB1 RMB1,5 SINGLE PHASE 4 POLE HXBR/ V 5Hz 42, ,5 REB1 RMB1,5 HXBR/ V 5Hz 1, REB1 RMB1,5 HXBR/ V 5Hz 145, ,5 REB1 RMB1,5 HXBR/ V 5Hz 268 1, REB2,5 RMB1,5 HXBR/ V 5Hz ,5 REB2,5 RMB3,5 HXBR/ V 5Hz 847 3, REB5 RMB3,5 HXBR/ V 5Hz 25 5, ,5 HXBR/ V 5Hz 5, SINGLE PHASE 6 POLE HXBR/ V 5Hz 4, REB1 RMB1,5 HXBR/ V 5Hz 138, ,5 REB1 RMB1,5 HXBR/ V 5Hz 255 1, REB2,5 RMB3,5 HXBR/ V 5Hz ,5 REB2,5 RMB3,5 HXBR/ V 5Hz 587 2, REB5 RMB3,5 THREE PHASE 2 POLE HXTR/ /4V 5Hz 1,5, Tri,37 VFKB45 THREE PHASE 4 POLE HXTR/ /4V 5Hz 47,4, ,5 RMT1,5 Tri,37 VFKB45 HXTR/ V 5Hz 98, RMT1,5 Tri,37 VFKB45 HXTR/ V 5Hz 145, ,5 RMT1,5 Tri,37 VFKB45 HXTR/ V 5Hz 258, RMT1,5 Tri,37 VFKB45 HXTR/ V 5Hz 45, ,5 RMT1,5 Tri,37 VFKB45 HXTR/ V 5Hz 943 1, RMT2,5 Tri,55 VFKB45 HXTR/ V 5Hz 18 2, ,5 Tri,75 VFKB45 HXTR/ V 5Hz 16 2, Tri,75 VFKB45 THREE PHASE 6 POLE HXTR/ V 5Hz 3, RMT1,5 Tri,37 VFKB45 HXTR/ V 5Hz 156, ,5 RMT1,5 Tri,37 VFKB45 HXTR/ V 5Hz 27, RMT1,5 Tri,37 VFKB45 HXTR/ V 5Hz 482, ,5 RMT1,5 Tri,37 VFKB45 HXTR/ V 5Hz 651 1, RMT1,5 Tri,37 VFKB45 HXTR/ V 5Hz , Tri,75 VFKB45 HXTR/ V 5Hz 191 3, Tri 1,5 VFKB45 THREE PHASE 8 POLE HXTR/ V 5Hz 82 1, Tri,37 VFKB45 THREE PHASE POLE HXTR/8 45 4V 5Hz 39, Tri,37 VFKB45 * Sound pressure level measured in free field conditions at a distance equivalent to three times the diameter of the impeller with a minimum of 1,5 meters. 55
3 Acoustic characteristics The sound levels NPS shown in the technical characteristic chart, correspond to the value of sound pressure db(a), measured in free field conditions at a distance equivalent to three times the diameter of the impeller with a minimum of 1.5 meters. Sound power level spectrum in db(a) at the corresponding octave band average frequencies in Hz. Model LwA
4 Plate mounted axial flow fans DIMENSIONS (mm) D D1 D2 A B E L F J C K M HT Model A Models: 2, 25, 315 and 355 B C D D1 D2 Models: 4, 45, 5, 56, 63 and 71 E F HT Single phase / ,5 1 /4 Three phase /6 /2 /4 J Single phase /6 K L Three phase M Single phase Three phase 25, ,5 1, HT B C D1 D2 E F HT K , , , A A 68 E D1 D2 C K F Model B 57
5 Performance curves HXBR/HXTR qv: Airflow in m 3 /h and m 3 /s. : Static pressure in Pa. p g : Protection guard pressure drop in Pa. SFP: Specific fan power in W/m 3 /s. P: Input power in W. Measurement category: A. Efficiency category: static. Fan efficiency without speed control. Fan tested without protection guard. Airflow data in accordance with ISO 581. Sound pressure level db(a), measured in a free field distance equal to 3 times the diameter, with a minimum of 1,5 m. Select the airflow performance in the area of the graph right of the dashed line. MC Measurement category EC Efficiency category VSD Speed control: supplied with the fan SR Specific ratio h[%] Efficiency N Efficiency grade [kw] Absorbed power [m 3 /h] Airflow Static pressure [RPM] Speed EXAMPLE CURVE HXTR/ q v [m 3 /h],4,6,8 1, 1,2 q v [m 3 /s] p g SFP MC* EC* VSD* SR* h[%]* N* [kw] [m 3 /h] [RPM] A Static No 1 28,5 38,5, V 58
6 Performance curves 2 POLE MOTORS HXBR/ V q v [m 3 /h],8,,16,2,24q v [m 3 /s] p g SFP 56 HXBR/225 HXTR/ V 1 6 4V q v [m 3 /h],15,2,25,3,35,4 q v [m 3 /s] p g SFP q v [m 3 /h],15,2,25,3,35,4 q v [m 3 /s] p g SFP 59
7 Performance curves 4 POLE MOTORS HXBR/425 HXBR/ V V q v [m 3 /h],15,2,25,3,35,4 q v [m 3 /s] p g SFP q v [m 3 /h],2,3,4,5 q v [m 3 /s] p g SFP HXBR/4355 HXBR/ V V q v [m 3 /h] MC* EC* VSD* SR* h[%]* N* [kw] [m 3 /h] [RPM] B Static No 1,1 28,4 4,1, ,2,3,4,5,6,7,8q v [m 3 /s] p g SFP q v [m 3 /h] MC* EC* VSD* SR* h[%]* N* [kw] [m 3 /h] [RPM] A Static No 1 3,1 4,, ,4,6,8 1, 1,2 1,4 q v [m 3 /s] p g SFP 6
8 Performance curves 4 POLE MOTORS HXBR/445 HXBR/ q v [m 3 /h],3,6,9 1,2 1,5 1,8 q v [m 3 /s] p g SFP 64 23V 64 MC* EC* VSD* SR* h[%]* N* [kw] [m 3 /h] [RPM] A Static No 1 29,6 38,1, q v [m 3 /h] 23V,4,8 1,2 1,6 2, 2,4q v [m 3 /s] p g SFP MC* EC* VSD* SR* h[%]* N* [kw] [m 3 /h] [RPM] A Static No 1 34, 41,1, HXBR/456 HXBR/ q v [m 3 /h] 23V 1, 1,5 2, 2,5 3, 3,5 q v [m 3 /s] p g SFP 69 MC* EC* VSD* SR* h[%]* N* [kw] [m 3 /h] [RPM] A Static No 1 3, 36, 1, q v [m 3 /h] 23V q v [m 3 /s] p g SFP 67 MC* EC* VSD* SR* h[%]* N* [kw] [m 3 /h] [RPM] A Static No 1 32, 38, 1,
9 Performance curves 4 POLE MOTORS HXTR/425 HXTR/ V 4 4 4V q v [m 3 /h],15,2,25,3,35,4 q v [m 3 /s] p g SFP q v [m 3 /h],2,3,4,5 q v [m 3 /s] p g SFP HXTR/4355 HXTR/ η q v [m 3 /h] 4V,2,3,4,5,6,7,8q v [m 3 /s] p g SFP MC* EC* VSD* SR* h[%]* N* [kw] [m 3 /h] [RPM] A Static No 1 3,4 42,, q v [m 3 /h] 4V,4,6,8 1, 1,2 q v [m 3 /s] p g SFP MC* EC* VSD* SR* h[%]* N* [kw] [m 3 /h] [RPM] A Static No 1 28,5 38,5,
10 Performance curves 4 POLE MOTORS HXTR/445 HXTR/ q v [m 3 /h],3,6,9 1,2 1,5 1,8 q v [m 3 /s] p g SFP 64 4V 64 MC* EC* VSD* SR* h[%]* N* [kw] [m 3 /h] [RPM] A Static No 1 33,6 42,2, q v [m 3 /h] 4V,8 1,2 1,6 2, 2,4 q v [m 3 /s] p g SFP MC* EC* VSD* SR* h[%]* N* [kw] [m 3 /h] [RPM] A Static No 1 31,5 38,3, HXTR/456 HXTR/ V V q v [m 3 /h] 1, 1,5 2, 2,5 3, 3,5 q v [m 3 /s] p g SFP MC* EC* VSD* SR* h[%]* N* [kw] [m 3 /h] [RPM] A Static No 1 33,7 39,7 1, q v [m 3 /h] 1, 1,5 2, 2,5 3, 3,5 q v [m 3 /s] p g SFP MC* EC* VSD* SR* h[%]* N* [kw] [m 3 /h] [RPM] A Static No 1 32,6 38,8 1,
11 Performance curves 6 POLE MOTORS HXBR/64 HXBR/ q v [m 3 /h] 23V,3,4,5,6,7,8,9 q v [m 3 /s] p g SFP η ,,2,4,6,8 1, 1, V q v [m 3 /h] SFP q v [m 3 /s] p g MC* EC* VSD* SR* h[%]* N* [kw] [m 3 /h] [RPM] A Static No 1 28,3 4,1, HXBR/65 HXBR/ q v [m 3 /h],4,6,8 1, 1,2 1,4 1,6 q v [m 3 /s] p g SFP 56 23V 57 MC* EC* VSD* SR* h[%]* N* [kw] [m 3 /h] [RPM] A Static No 1 27,4 37,8, q v [m 3 /h],4,8 1,2 1,6 2, 2,4q v [m 3 /s] p g SFP 62 23V 6 MC* EC* VSD* SR* h[%]* N* [kw] [m 3 /h] [RPM] A Static No 1 27,2 36,,
12 Performance curves 6 POLE MOTORS HXBR/663 HXTR/ q v [m 3 /h],8 1,2 1,6 2, 2,4 2,8 3,2 q v [m 3 /s] p g SFP 63 23V q v [m 3 /h],3,4,5,6,7,8,9 1, q v [m 3 /s] p g SFP 52 23V 52 5 MC* EC* VSD* SR* h[%]* N* [kw] [m 3 /h] [RPM] A Static No 1 32, 4,, HXTR/645 HXTR/ V V ,,2,4,6,8 1, 1,2 q v [m 3 /h] p g SFP q v [m 3 /s] MC* EC* VSD* SR* h[%]* N* [kw] [m 3 /h] [RPM] A Static No 1 26,4 37,9, q v [m 3 /h],4,6,8 1, 1,2 1,4 1,6 1,8 q v [m 3 /s] p g SFP MC* EC* VSD* SR* h[%]* N* [kw] [m 3 /h] [RPM] A Static No 1 28,2 38,4,
13 Performance curves 6 POLE MOTORS HXTR/656 HXTR/ q v [m 3 /h],8 1,2 1,6 2, 2,4 q v [m 3 /s] p g SFP 62 23V 6 MC* EC* VSD* SR* h[%]* N* [kw] [m 3 /h] [RPM] A Static No 1 27,7 36,2, q v [m 3 /h] ,8 1,2 1,6 2, 2,4 2,8 3,2 q v [m 3 /s] p g SFP 65 4V MC* EC* VSD* SR* h[%]* N* [kw] [m 3 /h] [RPM] A Static No 1 28,3 36,, HXTR/671 HXTR/ V V q v [m 3 /h] 1, 1,5 2, 2,5 3, 3,5 4, 4,5q v [m 3 /s] p g SFP MC* EC* VSD* SR* h[%]* N* [kw] [m 3 /h] [RPM] A Static No 1 29,7 36, 1, q v [m 3 /h] q v [m 3 /s] p g SFP MC* EC* VSD* SR* h[%]* N* [kw] [m 3 /h] [RPM] A Static No 1 37,5 42,2 1,
14 Performance curves 8 and POLE MOTORS HXTR/88 HXTR/ V V q v [m 3 /h] q v [m 3 /s] p g SFP MC* EC* VSD* SR* h[%]* N* [kw] [m 3 /h] [RPM] A Static No 1 33,5 4,5, q v [m 3 /h],8 1,2 1,6 2, 2,4 2,8 3,2 q v [m 3 /s] p g SFP MC* EC* VSD* SR* h[%]* N* [kw] [m 3 /h] [RPM] A Static No 1 28,4 38,, Mounting accessories Model Wire protection Exhaust side louvre shutters guards Plastic Aluminium 25 DEF25 D PER25 W PER25 CN 315 DEF325 D PER355 W PER355 CN 355 DEF375 D PER355 W PER355 CN 4 DEF45 D PER4 W PER4 CN 45 DEF45 D PER45 W PER45 CN 5 DEF525 D PER5 W PER5 CN 56 DEF63 D PER56 W PER63 CN 63 DEF63 D PER63 W PER63 CN 71 DEF8 D PER71 W PER71 CN 8 DEF8 D PER8 W PER8 CN Electrical accessories REB1N / REB 2,5N Single phase electronic speed controllers. REB4 Auto Electronic single phase speed controllers with temperature sensor. For agricultural applications. REB5 Single phase electronic speed controllers. VFKB IP65 Adjustable frequency drives for three phase motors to 4V. RMB Single phase 23V RMT Three phase 4V Single and three phase auto transformer speed controllers. VFTM IP21/IP54 Adjustable frequency drive for three phase motors to 4V. 67
PLATE MOUNTED SICKLE BLADE AXIAL FANS WITH EXTERNAL ROTOR MOTOR HXBR / HXTR Series. Plate mounted axial flow fans HXBR/HXTR. Corrosion resistance
A P P L I C A T I O N S PLATE MOUNTED SICKLE BLADE AXIAL FANS WITH EXTERNAL ROTOR MOTOR HXBR / HXTR Series Range of plate mounted axial fans manufactured from high grade galvanised steel and provided with
More informationHXBR / HXTR Series PLATE MOUNTED SICKLE BLADE AXIAL FANS WITH EXTERNAL ROTOR MOTOR. Plate mounted axial flow fans HXBR/HXTR. Corrosion resistance
PLATE MOUNTED SICKLE BLADE AXIAL FANS WITH EXTERNAL ROTOR MOTOR HXBR / HXTR Series 0 017982 603075 A P P L I C A T I O N S Range of plate mounted axial fans manufactured from high grade galvanised steel
More informationCONTRA ROTATING CASED AXIAL FANS TCBBx2 / TCBTx2 Series
Range of cylindrical cased axial fans fitted with aluminium impellers and manufactured from high grade rolled galvanised steel and protected against corrosion by cataforesis primer and black polyester
More informationCOMPACT Series type HCFB / HCFT (Plastic impellers)
Plate mounted axial flow fans COMPACT HCFB/HCFT PLATE MOUNTED AXIAL FLOW FANS COMPACT Series type HCFB / HCFT (Plastic impellers) 0 017582 603079 Compact design Corrosion resistance Flame retardant terminal
More informationACOUSTIC CABINET FANS CVAB / CVAT Series
Range of in-line cabinet fans, manufactured from galvanised steel sheet with double thickness side panels internally lined with 17 mm thickness of fireproof fibreglass acoustic insulation (M). All models
More informationsupplied in Form (B) configuration. Airflow over Impeller- Motor.
CYLINDRICAL CASED AXIAL FLOW FANS COMPACT Series TCBB-TCBT (Aluminium impellers) and TCFB-TCFT (Plastic impellers) NEW VERSIONS Description The S&P Cylindrical Cased Axial Fans feature, as the name suggests,
More informationROOF MOUNTED AXIAL FLOW FANS HCTB / HCTT Series
asy to install Supports to facilitate installation in the roof. XTRACTION (type B) SUPPLY (type A) High quality steel sleeve nsuring the long life of the fan. Range of axial roof fans with horizontal air
More informationCBM Series LOW PRESSURE CENTRIFUGAL FANS CBM. Low pressure centrifugal fans. Impeller dynamically balanced. Anti-vibration mounts
LOW PRESSURE CENTRIFUGAL FANS Series Range of double inlet direct driven low pressure centrifugal fans manufactured from galvanised sheet steel. All the models are fitted with forward curved centrifugal
More informationCBM Small Series LOW PRESSURE CENTRIFUGAL FANS. CBM Small. Low pressure centrifugal fans. Impeller dynamically balanced.
LOW PRESSURE CENTRIFUGAL FANS CBM Small Series Range of single and double inlet direct driven low pressure centrifugal fans manufactured from galvanised sheet steel and protected against corrosion by a
More informationCVAB / CVAT Series ACOUSTIC CABINET FANS CVAB / CVAT. Acoustic cabinet fans. Backward curved centrifugal impellers.
ACOUSTIC CABINET FANS Series Range of in-line cabinet fans, manufactured from galvanised steel sheet with double thickness side panels internally lined with 17 mm thickness of fireproof fibreglass acoustic
More informationACOUSTIC CABINET FANS CVB / CVT Series
Cabinet fans manufactured from heavy gauge galvanised steel sheet and internally lined with melamine foam flame retardant acoustic insulation (M1). All models incorporate double inlet single phase direct-drive
More informationCENTRIFUGAL IN-LINE FANS VENT Series
Range of in-line duct centrifugal fans, manufactured from high grade corrosion resistant pressed galvanised steel and supplied as standard with a prewired wiring junction box and a robust mounting foot.
More informationVENT Series CENTRIFUGAL IN-LINE FANS VENT. In-Line duct fans. Mounting foot
CENTRIFUGAL IN-LINE FANS Series Range of in-line duct centrifugal fans, manufactured from high grade corrosion resistant pressed galvanised steel and supplied as standard with a pre-wired wiring junction
More informationIN-LINE MIXED FLOW DUCT FANS TD-MIXVENT Series
Range of low profile in-line mixed flow duct fans manufactured in tough reinforced plastic (from 16 to 8 models) or with metal casing steel finished in a tough epoxy-polyester paint coating (from 1 to
More informationIN-LINE MIXED FLOW DUCT FANS TD-MIXVENT Series
Range of low profile in-line mixed flow duct fans manufactured in tough reinforced plastic (from to models) or with metal casing steel finished in a tough epoxy-polyester paint coating (from to models).
More informationMultifunctional roof fans for large flows. Multifunctional roof fans, highly robust construction, for large flows
HTMH Multifunctional roof fans for large flows Multifunctional roof fans, highly robust construction, for large flows Fan: Painted galvanised sheet steel base plate Turnable impellers cast aluminium. Protection
More informationBACKWARD CURVE CENTRIFUGAL FANS KABB / KABT Series
Cabinet fans manufactured from galvanised steel sheet with double thickness side panels lined with 17 mm thickness of fireproof fibreglass acoustic insulation (M0). Circular duct connection flange on the
More informationMultifunctional 400ºC/2h and 300ºC/2h roof fans
HTMF Multifunctional 400ºC/2h and 300ºC/2h roof fans Multifunctional 400ºC/2h ceiling fans to work inside fire danger zones, designed for smoke extraction in industrial or similar buildings. 0370-CPR-0544
More informationACOUSTIC CABINET FANS CENTRIBOX CVB/CVT. Acoustic cabinet fans. Circular duct connection flanges. Flame retardant IP55 remote terminal box
ACOUSTIC CABINET FANS CENTRIBOX CVB / CVT Series Cabinet fans manufactured from heavy gauge galvanised steel sheet and internally lined with melamine foam flame retardant acoustic insulation (M1). All
More informationAxial fans 400ºC/2h and 300ºC/2h With soundproofed box. Extraction units with axial fans to work inside fire danger zones.
CJTHT Axial fans 400ºC/2h and 300ºC/2h With soundproofed box Extraction units with axial fans to work inside fire danger zones. Fan: Sheet steel long casing fan. Galvanised sheet steel structure with thermal
More informationCGT Series Adjustable Pitch Fans
AXIAL FLOW CABINET FAN CGT Series Adjustable Pitch Fans New Ø 400-450-500 Range of adjustable pitch aerofoil blade, axial flow cabinet fans.fan casing manufactured from heavy gauge galvanised sheet steel
More informationDIRECT-AIR ILB / ILT Series Rectangular duct fans
IN-LINE DUCT FAN Series Rectangular duct fans Range of in-line rectangular duct fan manufactured from galvanised steel sheet and provided with an inspection cover that can be removed to access the motor/impeller
More informationCGT Series Adjustable Pitch Fans
AXIAL FLOW CABINET FAN CGT Series Adjustable Pitch Fans New Ø 400-450-500 Range of adjustable pitch aerofoil blade, axial flow cabinet fans.fan casing manufactured from heavy gauge galvanised sheet steel
More informationSabre Plate Mounted Sickle Fans (VSP)
Sabre Plate Mounted Sickle Fans (VSP) Swept impeller with Aerofoil blades, winglets and serrated trailing edge for optimum performance One shot die cast impeller, dynamically balanced for smoother operation
More informationIN-LINE CENTRIFUGAL DUCT FANS VT Series
IN-LINE CENTRIFUGAL DUCT FANS VT Series DESCRIPTION The VT series of circular in-line duct centrifugal fans consists of model variations within nominal model sizes of,,,,, and mm respectively. The VT range
More informationTHT/HATCH THT/HATCH. Order code THT/HATCH 40 2T 1 N 1 G
THT/HATCH High-powered ventilators with motorised opening and equipped with a roof fan, for smoke extraction in the event of a fire, 400ºC/2h High-powered ventilators with roof fan and motorised opening.
More information400ºC/2h centrifugal roof fans with horizontal or vertical air outlet CHT 200 4T BS. Installed capacity
400ºC/2h centrifugal roof fans with horizontal or vertical air outlet : 400ºC/2h centrifugal roof fans with horizontal air outlet, hood in aluminium : 400ºC/2h centrifugal roof fans with vertical air outlet,
More information400ºC/2h and 300ºC/2h roof-mounted helical extractor fans with vertical air outlet
THT/ROOF ROOF-MOUNTED SMOKE EXTRACTOR FANS THT/ROOF 400ºC/2h and 300ºC/2h roof-mounted helical extractor fans with vertical air outlet Roof-mounted helical extractor fans with vertical air outlet, for
More informationSeries VENTS OVK. Low pressure axial fans in the steel casing with the air capacity up to m 3 /h for wall mounting
AXIAL FANS Series VENTS OV Series VENTS OVK Series VENTS Low pressure axial fans in the steel casing with the air capacity up to 122 m 3 /h for wall mounting Low pressure axial fans in the steel casing
More informationAxial-flow Fan AFC. Model numbering system AF C / T. Accessories Three phase. Power rate 1.
xial-flow Fan FC Construction xial fan designed for installation in a ducted system. Casing of rolled and electro-welded steel sheet, powder coated RL5. Impeller in polypropylene. Casing in acid-proof
More informationShort casing. Long casing (L version) Commercial premises
CYLINDRICAL CASED AXIAL FLOW FANS TGT Series Adjustable Pitch Fans Long casing (L version) Short casing A P P L I C A T I O N S Range of adjustable pitch cased axial flow fans. Casings formed from rolled
More informationRobust wall-mounted axial or long-cased fans, PL version supplied with plastic impeller and AL version supplied with aluminium impeller
HCH HCT HCH HCT Order code Robust wall-mounted axial or long-cased fans Robust wall-mounted axial or long-cased fans, PL version supplied with plastic impeller and AL version supplied with aluminium impeller
More informationCHVB / CHVT Series. Cabinet fans designed for smoke extraction in fire condition F BACKWARD CURVED CENTRIFUGAL FANS CHVB / CHVT
BACKWARD CURVED CENTRIFUGAL FANS Series The CHVB-CHVT range is suitable for many general ventilation applications where high system resistances are present; i.e. systems with filters, dampers etc. Range
More informationUltra-quiet circular duct fans TD-SILENT ECOWATT Series
TD-SILENT ECOWATT - MODELS 5 to TD-SILENT ECOWATT - MODELS AND At 5% of full speed fan power consumption is reduced by 7% Low profile Mixed-flow fans with sound-absorbent insulation, extremely quiet, fan
More informationCJBD/ALF CJBX/ALS CJBX/ALF CJBD/ALS VENTILATION UNITS WITH ALUMINIUM PROFILES. According EU Regulation
CJBD/AL CJBD/ALS CJBD/ALF CJBX/AL CJBX/ALS CJBX/ALF VENTILATION UNITS WITH ALUMINIUM PROFILES According EU Regulation CJBD/AL CJBD/ALS CJBD/ALF CJBD/AL: Soundproofed ventilation units with profiles in
More informationAxial fans. What s more, non-stock models are normally available within two weeks.
Axial fans 7 sees the introduction of a new production line at Xpelair s Peterborough plant for the Scimitar Sickle blade fans in Plate, Short Case and Roof versions up to 63mm. Scimitar will join an impressive
More informationCENTRIFUGAL DIRECT DRIVE FANS CMT-CMB
CENTRIFUGAL DIRECT DRIVE FANS CMT-CMB Applications The CMT-CMB range of fans are suitable for many general and OEM ventilation applications where the extract of nonhazardous heated air is required. The
More informationPerformance. Sound Levels. Impellers. Motors. Accessories
EuroSeries (ESP) Die cast aluminium impellers Fully speed controllable Air Volumes up to 13.89m 3 /s Sizes 250 to 1000 dia protected to IP54 Operating Temperatures from -40 C up to +70 C Insulation Class
More informationCAS 460 2T 7.5. Impeller size motor poles 2=3500 r/min. 60 Hz. Installed power
CAS CAS: High pressure, single inlet centrifugal fans with sheet steel casing and impeller : High pressure, single inlet centrifugal fans with sheet steel casing and impeller, fitted with acoustic attenuators
More informationHIGH-POWERED VENTILATORS
HIGH-POWERED VENTILATORS WITH ROOF FANS 400ºC/2h The THT/HATCH series was designed using high-powered ventilator technology for smoke extraction in the event of a fire, and is equipped with THT series
More informationWINDER. Impellers with higher efficiency and less sound level
WINDER Impellers with higher efficiency and less sound level Winder Solutions The last new generation impeller With the Serrated Novovent Concept (S.N.C.), NOVOVENT, S.A. has developed a new blades generation.
More informationBELT DRIVEN CABINET FANS CVTT Series
Range of forward curved belt drive cabinet fans manufactured from galvanised steel sheet, internally lined with melamine thermo-acoustic insulation. ll models incorporate a double inlet low pressure centrifugal
More informationBOX BLB Centrifugal Box Fan
Centrifugal Box Fan Select models available for next day delivery Product Overview 3 sizes from 260mm to 400mm Air volume flow rates up to 0.751m³/s Static pressures up to 733 Pa Suitable for operating
More informationCHMT Series, F Rated Fans
CNTRIFUGAL SINGL INLT FANS CT Series, F400 120 Rated Fans Officially approved to N12101-3 standard (certificate number 0370-CPD-0348) Range of single inlet direct drive centrifugal fans designed for smoke
More informationROOF MOUNTED FANS TH-MIXVENT Series Mixed Flow Fans TH-MIXVENT. Roof mounted fans. Flame retardant terminal box. Circular spigot coupling
ROOF MOUNTED FNS Series Mixed Flow Fans P P L I T I O N S Workshops ommercial premises Offices Restaurants and cafes Wine cellars asements Range of roof mounted mixed flow fans supplied as standard for
More informationDynamically-balanced impellers with extremely robust cores CMP T 5.5
Medium pressure, single inlet centrifugal fans with sheet steel casing and impeller Fan: Sheet steel casing. Forward-curved impeller made of galvanised sheet steel. 38-2M model casing in cast aluminium.
More informationVersatility. Features. By installing the SILENT MV, you will never experience the disturbance of noisy ventilation again. Benefits
Ultra quiet and low profile helicocentrifugal in-line fans suitable for a wide range of domestic and commercial applications. Fitted with sound absorbent insulation and manufactured with an adjustable
More informationIN-LINE DUCT FANS MIXVENT-TD Fan Systems
IN-LINE DUCT FANS MIXVENT-TD Fan Systems NEW TD-EXTRACTOR KIT (see page 175) MIXVENT TD / MIXVENT TD-T MIXVENT TDx2 ACCESSORIES Description Range Construction The MIXVENT system has been designed to compliment
More informationCMP-L/EW B T D. Industrial Brushless Motors E.C. Motor power (CV) Three-phase VSD 400 V50/60 Hz. electrical power Maximum.
CMP-L/EW BRUSHLESS INDUSTRIAL BRUSHLESS MOTOR E.C. VARIABLE SPEED DRIVE VSD: Variable Speed Drive.. VSD1/B. VSD3/B Supply included with fan CONTROL Supply optional accesory SUPPLY VSD1/B: 220-240 V 50/60
More informationSquare Mixed Flow Fans (MFQ)
Square Mixed Flow Fans (MFQ) Features and Benefits Motors protected to IP44 Motor insulation Class B Maximum operating temperature +40 C Standard Thermal Overload Protection Sizes 400 to 500 3 phase are
More informationIn-Line Fans. Roof Fans. Fans ATEX. Centrifugal Fans. Chip Extractors. Domestic Fans. Accessories. Electric Diagrams. General Information.
In-Line Fans xial-flow Fans Wall Versions xial-flow Fans Cased Versions Roof Fans Fans TEX Centrifugal Fans VISP/VSP Centrifugal Fans Side Channel lowers Chip Extractors COMPCT 44 TCx, TCTx FC 54 FC-V
More informationSquare Duct Fans - ESTOC Range. Estoc Features. Electrical Supply. Product Code. Sizes 355, 400, 450, 500, 560, 630 and 710.
Square Duct Fans - ESTOC Range Features Sizes from 355 to 71 mm diameter Air flow 1,9 m 3 /h (5.2 m 3 /s) Static pressures up to 115 Pa Maximum temperature from +4 C to +7` C (depending on the model) Adjustable
More informationGigaBox centrifugal fans Product specific information
GigaBox centrifugal fans Product specific information GigaBox and accessories Wall bracket GB-WK (ccessories) Outdoor cover hood GB-WSD (ccessories) Included in delivery: a) Flexible sleeve b) Outlet spigot,
More informationAcoustic Twin Fans (ATQ)
Acoustic Twin Fans (ATQ) Features and Benefits Available in sizes from 100 to 500mm dia 50mm Acoustically treated housing, Class O rated, self extinguishing, zero burn rate, resists ignition, no toxic
More informationSabre Sickle Fan Assisted Roof Cowls (VSR)
Sabre Sickle Fan Assisted Roof Cowls (VSR) Swept impeller with Aerofoil blades, winglets and serrated trailing edge for optimum performance Fully assembled cowl, separate plate axial fan Optional backdraught
More informationNEW Acoustic In-Line Fans (ACQ)
NEW Acoustic In-Line Fans (ACQ) Acoustically treated housing, Class O rated, sandwich construction selected for maximum noise absorption Motors protected to IP44 Motor insulation Class B Maximum operating
More informationSection 4 e c tio - P lat F a n s
Plate Fans Section 4 The Fläkt Woods Plate Fan Range is the result of detailed market analysis and intensive research and development by the world leaders in air movement technology. By setting and achieving
More informationCentrifugal performance characteristics with axial flow pattern: RADAX VAR
High pressure in-line mixed-flow fans RADAX VAR Centrifugal performance characteristics with axial flow pattern: RADAX VAR COMPACT PRESSURE-RESISTANT UNIVERSAL In their compact casing, the RADAX VAR impellers
More informationTGT Series Adjustable Pitch Fans
CYLINDRICAL CASED AXIAL FLOW FANS Series Adjustable Pitch Fans Range of adjustable pitch aerofoil blade, cased axial flow fans.casings formed from rolled sheet steel with a corrosion resistant hot dipped
More informationShort casing. Long casing (L version) Highly versatile range due to different number of available blades and adjustable pitch angles
CYLINDRICAL CASED AXIAL FLOW FANS TGT Series Additional Information Standard air direction: form (B) configuration (Impeller over ). models description: incorporated an "L" after blade pitch angle. E.g.
More informationErP POWERBOX EC FANS - ESTOC EC FEATURES ELECTRICAL SUPPLY TEMPERATURE RANGE SIZES FEATURES AND CONSTRUCTION PRODUCT CODE IMPELLER MOTOR
13 POWERBOX EC FANS - ESTOC EC FEATURES Sizes from 3 to 3 mm diameter Air flow up to.1 m 3 /s Static pressures up to Pa Controllable EC motors Multiple outlet orientations ELECTRICAL SUPPLY 22-2V/Hz/1f
More informationMixed Flow Roof Fans (RMH)
Mixed Flow Roof Fans (RMH) Motors protected to IP44 Motor insulation Class B Maximum operating temperature 4 C Standard Thermal Overload Protection IP65 service isolator Bird guard included as standard
More informationTGT Series Adjustable Pitch Fans
CYLINDRICAL CASED AXIAL FLOW FANS TGT Series Adjustable Pitch Fans Range of adjustable pitch aerofoil blade, cased axial flow fans.casings formed from rolled sheet steel with a corrosion resistant hot
More informationBifurcated Case Axial Fans (BIFA)
Bifurcated Case Axial Fans (BIFA) Sizes 250 to 1000 dia Motors protected to IP55 Motor insulation Class F Maximum ambient temperature 200 C Speed controllable via transformer or inverter (when the ambient
More informationMegaBox Product-specific information
MegaBox Product-specific information Application Noise-encapsulating centrifugal fans with retractable motor impeller unit and motor located outside the air flow Suitable for rough operating conditions
More informationVent-Axia Sabre Sickle Roof Fans (VSR)
Vent-Axia Sabre Sickle Roof Fans (VSR) Features and Benefits High performance roof sickle fan Fully assembled cowl. Optional backdraught shutters and birdguard Moulded from recyclable polymeric material,
More informationUniclass L7534. Manufacture controlled to ISO9001
CABINET & TWIN FANS FOR INDUSTRIAL / COMMERCIAL USE "ACFS" - Quiet Duct Centrifugal - Single Fan "DMTSQ" - Quiet Duct Centrifugal - Twin Fan "RMS" - Roof Centrifugal - Single Fan "RMTS" - Roof Centrifugal
More informationThe Straight Way. Rectangular Cabinet Fan. Fans Air Handling Units Air Distribution Products Fire Safety Air Curtains and heating Products Tunnel Fans
Fans Air Handling Units Air Distribution Products Fire Safety Air Curtains and heating Products Tunnel Fans The Straight Way Rectangular Cabinet Fan Systemair India Pvt. Ltd. certifies that the Rectangular
More informationMixed Flow Roof Fans (RMH)
Mixed Flow Roof Fans (RMH) Features and Benefits Motors protected to IP44 Motor insulation Class B Maximum operating temperature 4 C Standard Thermal Overload Protection IP65 P65 service isolator Guard
More informationNEW WINDER. Impellers with higher efficiency and less sound level
NEW Impellers with higher efficiency and less sound level Winder Solutions The last new generation impeller With the Serrated Novovent Concept (S.N.C.), NOVOVENT, S.A. has developed a new blades generation.
More informationTerminal Box Are to IP54, as standard, protected against dust and water from any angle allowing outside applications.
EuroSeries (ESR) Cowl & base moulded from recyclable polymeric material All sizes resistant to UV light Sizes 250 to 1000 dia are protected to IP54 Optional backdraught shutters and bird guard (250-630mm)
More informationNEW Slimpak EC Box Fan (SLPT EC)
NEW Slimpak EC Box Fan (SLPT EC) Compact low profile design Duct Sizes 100 500mm Performance - Airflow 0.01 to 1.2m 3 /s, Pressure up to 650Pa Latest energy saving EC/DC motors Internal mounting IPX2 Manufactured
More informationKitchen exhaust fan GLEB
Kitchen exhaust fan GLEB Contents General description...3 Quick selection...5 Design description...5 Material and design...6 Fan impeller...6 Motor...6...6 Quality...6 Specification...6 Technical data
More informationIN-LINE MIXED FLOW DUCT FANS MIXVENT-TD Fan Systems
IN-LINE MIXED FLOW DUCT FANS MIXVENT-TD Fan Systems MIXVENT TD / MIXVENT TD-T MIXVENT TDx2 ACCESSORIES Description Range Construction The MIXVENT system has been designed to compliment the MIXVENT-TD range
More informationAxial or tubular wall-mounted fans, PL version fitted with a plastic rotor and AL version with an aluminium rotor.
HCH HCH Extremely robust wall-mounted, axial or tubular fans Axial or tubular wall-mounted fans, PL version fitted with a plastic rotor and AL version with an aluminium rotor. Fan: Airflow direction from
More informationCentrifugal medium-pressure fans fitted with multi-blade
CMP/ATEX CMP/ATEX impeller Centrifugal medium-pressure fans fitted with multi-blade with ATEX certification Centrifugal single-inlet, medium-pressure fans with casing and sheet steel impeller to work in
More informationAAVC. Accessories HIGH PRESSURE FANS HIGH PRESSURE WITH BACKWARD IMPELLER MANUFACTURING FEATURES:
AAVC HIGH PRESSURE WITH BACKWARD IMPELLER MANUFACTURING FEATURES: Accessories Fan made of Fe360 sheet. The fan paint finish is based on a Qualicoat polyester powder coating stoved at 200ºC, with an average
More informationHigh-efficiency long-cased axial fans fitted industrial Brushless motor E.C. Fibreglass-reinforced plastic impeller.
HEPT/EW with High-efficiency long-cased axial fans fitted industrial Brushless motor E.C. BRUSHLESS MOTOR BRUSHLESS INDUSTRIAL E.C. Fibreglass-reinforced plastic impeller. Fan: Airflow direction from motor
More informationCRH RANGE - TECHNICAL DATA CENTRIFUGAL ROOF FANS
ge 2 CENTRIFUGAL CRH RANGE - TECHNICAL ROOF DATA FANS FOR INDUSTRIAL / COMMERCIAL USE CRH - Horizontal Discharge CRV - Vertical Discharge CRL - Low Profile Uniclass L7534 Tel: +44 ()1494 522333 Fax: Vectaire
More informationBATHROOM EXTRACT FANS DECOR-100 Series
DECOR-1 Series Range of axial extractors with airflow rates of 1 m 3 /h, for connection to 1 mm diameter circular ducting. All the fans are manufactured from injection moulded plastic, fitted with neon
More informationSILENT MV Ultra Quiet In-line Fans
Ultra Quiet In-line Fans 5 IP44 2 YEAR GUARANTEE Ultra quiet and low profile helicocentrifugal in-line fans suitable for a wide range of domestic and commercial applications. Fitted with sound absorbent
More informationTD-MIXVENT Series IN-LINE MIXED FLOW DUCT FANS TD-MIXVENT. In-Line duct fans
IN-LINE MIXED FLOW DUCT FANS Series Range of low profile in-line mixed flow duct fans manufactured in tough reinforced plastic (from 160 to 800 models) or with metal casing steel finished in a tough epoxy-polyester
More informationCENTRIFLOW 3D WITH AC MOTOR >> Technical catalouge
CENTRIFLOW 3D plug fan WITH AC MOTOR >> Technical catalouge air comfort Centriflow 3D 2 GMEB CentriFlow 3D - Technical Catalouge Contents GENERAL Description and survey chart Application... 3 General Survey
More informationVKAP 100 MD/LD 3.0 Product version Motor power level (M higher power level, L lower power level) Diameter Product name. Guard grille.
Application Features Power supply Circular duct fans are used in low-to medium-pressure ducted systems. Fans are suitable for air supply or exhaust of residential buildings, warehouses, bathrooms, lavatories,
More informationCMB / CMT Series CENTRIFUGAL SINGLE INLET FANS. Centrifugal direct drive fans CMB/CMT 80 C. Impeller dynamically balanced
CENTRIFUGAL SINGLE INLET FANS CMB / CMT Series 80 C CONTINUOUS operation Range of centrifugal single inlet fans suitable for continuous extraction of airstreams temperature up to 80ºC (Series 1) or 150ºC
More informationCMR/EW EFFICIENT WORK
CMR/EW AC VARIABLE SPEED DRIVE VSD: Variable Speed Drive.. VSD1/A-RFM. VSD3/A-RFT Supply on request CONTROL Supply optional accesory SUPPLY VSD1/A-RFM: 220-240 V 50/60 Hz VSD3/A-RFT: 380-415 V 50/60 Hz
More informationAC Commercial Fans Edition. ErP ready
AC Commercial Fans 213 Edition ErP ready AC Commercial Fans Axair Fans UK Ltd / 1782 34943 About Axair Fans UK Axair is an independent industrial fan manufacturer and distributor. What we offer : Application
More informationEco Mixed Flow (emf) Energy Saver. Terminal Box. Performance. Quality Assurance. Impellers. Accessories. Motors
Eco Mixed Flow (emf) High efficiency Mixed Flow Fan with guide vanes Available in sizes 355 to 710mm dia. IP54 Fan rating (duct mounted) Operating temperatures up to 80 C (see technical specification)
More informationAXIAL FLOW CABINET FAN CGT Series
Range of adjustable pitch aerofoil blade, axial flow cabinet fans. Fan casing manufactured from heavy gauge galvanised sheet steel internally lined with 25 mm thickness fireproof fibreglass acoustic insulation
More informationCENTRIFLOW 3D WITH AC MOTOR >> Technical catalogue
CENTRIFLOW 3D plug fan WITH AC MOTOR >> Technical catalogue air comfort Centriflow 3D 2 GMEB CentriFlow 3D - Technical Catalogue Contents GENERAL Description and survey chart Application... 3 General Survey
More informationBPF. Centrifugal Plug Fans
BPF Centrifugal Plug Fans Introduction INTRODUCTION Plug Fans S&P - THE COMPANY Soler & Palau was founded in 1951 in Ripoll (Spain) and since this date has become one of the world s leading companies engaged
More informationSeries VENTS KSK. Centrifugal kitchen fan in sound-insulated casing with air flow up to 8138 m 3 /h
SOUND-INSULATED KITCHEN FAN Series device. The impeller is mounted on the motor shaft and is balanced statically and dynamically. The motor has F class motor winding insulation and ingress protection rating.
More informationSquare Duct Fans - ESTOC TARGE Range. Estoc Targe Features. Electrical Supply. Sizes 355, 400, 450, 500, 560 and 630.
Square Duct Fans - ESTOC TARGE Range Features Sizes from 55 to 6 mm diameter Air flow 21, m /h (5.8 m /s) Static pressures up to 145 Pa Maximum temperature up to 11 C Controllable external rotor motors
More informationCircular Duct Fan prioair
Fans Air Handling Units Air Distribution Products Fire Safety Air Curtains and Heating Products Tunnel Fans Circular Duct Fan prioair More performance. Less energy consumption. The new EC circular duct
More informationVORTICENT C E RANGE Centrifugal fans
NEW VORTICENT C E RANGE Centrifugal fans Suitable for domestic, commercial and industrial applications: kitchens, bathrooms, offices, laboratories, factories, shops, laundromats, models, restaurants, bars,
More informationCMP/EW EFFICIENT WORK
CMP/EW High-efficiency centrifugal single-inlet, medium-pressure fans with a direct motor and impeller with forward-facing blades fitted with IE3 asynchronous motor adjustable electronically. AC HIGHLY
More informationCentriflow Plus EC. Technical data
Technical data Centriflow Plus CTLOGUE Contents General description...3 General survey chart...4 Design description Fan Impeller...5 Inlet cone and supporting frame...5 EC motor...5 ir flow sensor...6
More informationROOFMASTER STEF-HT ROOF FAN
fire safety Air movement Roof Fans ROOFMASTER STEF-HT ROOF FAN» Technical CATALOGuE Contents ROOFMASTER STEF-HT...3 Performance Data...4 Performance Table...5 General description...6 Fan Chart-explanation
More informationCYLINDRICAL CASED AXIAL FLOW FANS
- Adjustable pitch fans Range of adjustable pitch aerofoil blade, cased axial flow fans. Casings formed from rolled sheet steel with a corrosion resistant hot dipped galvanised finish. All models incorporate
More informationCONTINUO. Radial centrifugal impeller. Radial centrifugal impellers dynamically balanced, according to ISO 1940 standard,
RADIAL CENTRIFUGAL FANS CBT-N Series CONTINUO Range of single inlet direct driven centrifugal fans designed for the continuous extraction of air stream up to 120ºC(1). The casings are manufactured from
More information