AC axial fan. blades with special design (K series) with guard grille for full nozzle

Size: px

Start display at page:

Download "AC axial fan. blades with special design (K series) with guard grille for full nozzle"

Dustin Walton
5 years ago
Views:

SE6-EC-5 ebm-papst Mulfingen GmbH & Co. KG Bachmühle D-767 Mulfingen Phone +9 798 8- Fax +9 798 8- info@de.ebmpapst.

com Limited partnership Headquarters Mulfingen County court Stuttgart HRA 59 General partner Elektrobau Mulfingen GmbH Headquarters Mulfingen County court Stuttgart HRB 59 Nominal data Type Motor

1 SE6-EC-5 ebm-papst Mulfingen GmbH & Co. KG Bachmühle D-767 Mulfingen Phone Fax Limited partnership Headquarters Mulfingen County court Stuttgart HRA 59 General partner Elektrobau Mulfingen GmbH Headquarters Mulfingen County court Stuttgart HRB 59 Nominal data Type Motor SE6-EC-5 ME68-DF Phase ~ ~ Nominal voltage VAC Frequency Hz 5 6 Type of data definition fa fa Valid for approval / standard CE CE Speed min - Power input W 5 5 Current draw A.5.6 Motor capacitor µf Capacitor voltage VDB Capacitor standard P (CE) P (CE) Max. back pressure Pa Min. ambient temperature C -5-5 Max. ambient temperature C Starting current A..6 ml = Max. load me = Max. efficiency fa = Running at free air cs = Customer specs cu = Customer unit Subject to alterations Item no Revision 8 Release --8 Page / 5 ebm-papst Mulfingen GmbH & Co. KG Bachmühle D-767 Mulfingen Phone +9 () Fax +9 () info@de.ebmpapst.com

2 SE6-EC-5 Technical features Mass Size Surface of rotor Material of blades Number of blades Direction of air flow Direction of rotation kg 6 mm Coated in black PP plastic "V" Counter-clockwise, seen on rotor Type of protection IP ; Depending on installation and position as per EN 6- Insulation class "B" Humidity class F- Max. permissible ambient motor temp. (transp./ storage) Min. permissible ambient motor temp. (transp./storage) Mounting position Condensate discharge holes Operation mode Motor bearing Touch current acc. IEC 699 (measuring network Fig., TN system) Motor protection Cable exit Protection class Product conforming to standard + 8 C - C Shaft horizontal or rotor on bottom; rotor on top on request Rotor-side S Ball bearing <.75 ma Thermal overload protector (TOP) wired internally Axial I (if protective earth is connected by customer at the connection point of the housing) EN 65-; CE Approval UL Item no Revision 8 Release --8 Page / 5 ebm-papst Mulfingen GmbH & Co. KG Bachmühle D-767 Mulfingen Phone +9 () Fax +9 () info@de.ebmpapst.com

3 SE6-EC-5 Product drawing Direction of air flow "V" Connection line PVC G AWG, x lead tips crimped Connection screen U blue Z brown U black PE green/yellow Item no Revision 8 Release --8 Page / 5 ebm-papst Mulfingen GmbH & Co. KG Bachmühle D-767 Mulfingen Phone +9 () Fax +9 () info@de.ebmpapst.com

4 SE6-EC-5 Charts: Air flow 5 Hz 9 rho=, kg/m³ qv [CFM] 6 8,6 pfs [Pa] ,,,,8,6,,,,8,6 pfs [InHO] Measurement: LU-798 Air performance measured as per ISO 58 Installation category A. For detailed information on the measuring set-up, please contact ebm-papst. Suction-side noise levels: LwA measured as per ISO 7 / LpA measured with m distance to fan axis. The values given are valid under the measuring conditions mentioned above and may vary according to the actual installation situation. With any deviation from the standard set-up, the specific values have to be checked and reviewed with the unit installed. 5,, 5,,8 5,6, qv [m³/h] 6 8, Measured values U V f Hz n min - 95 P e W I A qv m /h p fs Pa U = Supply voltage f = Frequency n = Speed P e = Power input I = Current draw qv = Air flow p fs = Pressure increase Item no Revision 8 Release --8 Page / 5 ebm-papst Mulfingen GmbH & Co. KG Bachmühle D-767 Mulfingen Phone +9 () Fax +9 () info@de.ebmpapst.com

5 SE6-EC-5 Charts: Air flow 6 Hz pfs [Pa] rho=, kg/m³ qv [CFM] qv [m³/h] 5,8,7,6,5,,,,,,9,8,7,6,5,,,,,,9,8,7,6,5,,,, pfs [InHO] Measurement: LU-799 Air performance measured as per ISO 58 Installation category A. For detailed information on the measuring set-up, please contact ebm-papst. Suction-side noise levels: LwA measured as per ISO 7 / LpA measured with m distance to fan axis. The values given are valid under the measuring conditions mentioned above and may vary according to the actual installation situation. With any deviation from the standard set-up, the specific values have to be checked and reviewed with the unit installed. Measured values U V f Hz n min P e W I A qv m /h p fs Pa 5 5 U = Supply voltage f = Frequency n = Speed P e = Power input I = Current draw qv = Air flow p fs = Pressure increase Item no Revision 8 Release --8 Page 5 / 5 ebm-papst Mulfingen GmbH & Co. KG Bachmühle D-767 Mulfingen Phone +9 () Fax +9 () info@de.ebmpapst.com

AC axial fan. Limited partnership Headquarters Mulfingen County court Stuttgart HRA

AC axial fan. Limited partnership Headquarters Mulfingen County court Stuttgart HRA S4D45-AP3- ebm-papst Mulfingen GmbH & Co. KG Bachmühle D-74673 Mulfingen Phone +49 7938 8- Fax +49 7938 8- info@de.ebmpapst.com www.ebmpapst.com Limited partnership Headquarters Mulfingen County court