Pole Basics January, 2008

Transcription

1 Pole asics Table of ontents Available Poles... Page 2 olt-on rackets... Page 3 Tenon ount rackets... Page 4 Internal Slipfitter... Page 5 Handhole overs... Page 5 Pole aps... Page 5 Anchor olts... Page 6 ase overs... Page 7 EPAs... Page 8 Wall ount rackets... Page 8

2 Pole asics Available Poles STEE ROUN POES STEE SQUARE POES STEE ROUN TAPERE POES OPTIONA FOO IGHT PREPARATION (standard 3/4 of the way up the pole) Standard rill 2-olt Pattern (2 mounting holes - 1 wireway) SQO RPO RTPO Tenon ount SQN RPN Standard Tennon RTPN 2 3/8" dia. x 4 3/ Tall HAN-HOE Pole Top ount SQP RPP RTPP Top View ASE OVER No rilling SQI For use with Internal Slip-Fitter racket (See p.5) PROETION 1 STANAR Flood ight Preparation Available on all Above Poles GROUN EVE FOUNATION Y OTHERS (4) ANHOR OTS For use with FO rackets (See p.3) Square Poles Round and Round Tapered Poles SI Industries Inc. 3305

3 Pole asics olt-on rackets SQO, RPO, RTPO (2-bolt pattern) 2-1/ x 5-3/8" x 2-1/ x 5-3/8" x 8" 2-1/ x 5-3/8" x 1 2-1/ x 5-3/8" x 2-1/ x 6-7/8" x KA O S (6, 8, or 12) R R Aluminum 2-bolt pattern- Use with all area light fixtures except hallenger, Patriot or Patriot Small. (Round pole applications use RPP2) Part # R 8" Part # R 1 Part # R KA HRO S 6 R Aluminum 2-bolt pattern- Use with Hilton II & Hilton II Small on round poles. Part # R KA HIO S 6 R Aluminum 2-bolt pattern- Use with Hilton arge on round poles. Part # 43050R KA O E 6 R Aluminum extension bracket- Use with hallenger or Patriot. Part # R For Patriot Small, order KA-O-PTS-E6-R Part # R (Round pole applications require RPP) KA O A 6 R - Adjustable Aluminum 2-bolt pattern (both sides)- Standard arm is not used. annot be used with top-access fixtures, Hilton arge, hallenger, Patriot or Patriot Small. For use with square pole only. Part # R KS O PA 40 R - Parallel Arm 1 piece steel 2-bolt pattern designed for direct mounting of fixture to face of bracket. Standard arms are not required except for Hilton Series. Part # R KU O S 19 R - Upsweep Arm 3 piece aluminum 2-bolt pattern- ompatible with hallenger, Patriot and Patriot Small. Part # R RPP2 K - Round Pole Plate Part # K RPP R - Round Pole Plate For hallenger, Patriot and Patriot Small Part # R KA O RA 8 R - Radius Arm For hallenger, hallenger edium, Patriot, Patriot Small, all Square and Rectangular Fixtures Part # R rilling ocations A (Hand-hole ) Note: onsult factory for custom variations. Standard SF and F pole preparations are located 3/4 of the height of the pole from the base, unless otherwise specified. (Except on Round Tapered pole -aximum height for SF & F is 13' from base.) Hand-hole Single s A X X 180 X X 90 X X T90 X X X TN120 * X Q90 X X X X Single FO(SF) X ouble FO(F) X X *Other two locations will be 120 to the left and right of A. Fixture onfigurations Single 90 N Parallel T90 TN120 QN90 Q90 Flood rackets - For use with SF & F pole preparations 4-3/ 18-7/8" 30" KS FO 5 * R Part # R KS FO 18 * R Part # R KS FO 30 R Part # R 2008 SI Industries Inc

4 Pole asics Tenon ount rackets SQN, RPN, RTPN Tenon ount Fitters Single/180 (drilled 2 sides) 90/Q90/T90 (drilled 4 sides) Front KA N * R For flat surface brackets. Single/180 - Part # 43549R 90/Q90/T90 - Part # 43548R KA RN TN120 * R rilled 3 sides at 120. For radius surface brackets. Round pole plate is required for use with all fixtures except Hilton Series. Part # R KA RN Q90 * R rilled 4 sides at 90. For radius surface brackets. Round pole plate is required for use with all fixtures except Hilton Series. Part # R KA N A 5 R ast Arm Adaptor For use with existing mast arm by others. annot be used with Hilton Series. Slipfits 2 pipe (2-3/8 O..) Part # R ounting Hole Plugs Set of 3 for square pole. Part # H mounting hole decal is available for round poles. onsult factory. Tenon ount Adjustable Tenon ount Parallel Arm Thru bolt 9-3/ x 8" x 40" Tenon Adaptor KA N A * R Aluminum round slipfitter for 2-3/8" O.. or 2-7/8" O.. tenon - should not be used with standard arm. annot be used with top-access fixtures, hallenger, Patriot, Hilton arge or Patriot Small Series. Part No R Tenon Reducers N-R Steel round slipfitter reducer, comes with set screws and one through bolt. Pole Top Adaptors KS N PA 40 R One piece steel arm, round slipfitter for 2 3/8" O.. tenon. esigned for direct mounting of fixtures to face of bracket. Standard arm is not required, except for Hilton Series. Part No R RPT-TA Steel round slipfitter reducer, comes with set screws and one through bolt. P/N escription I.. O.. Fits How uch Play R KS-N-R-2.5-R 3.068" O.. 2-5/8" to 2-7/8" R KS-N-R-3.0-R 3.640" 4.0" 3. O.. 3-1/ to 3-1/ R KS-N-R-3.5-R 4.140" " O.. 3-3/ to NOTES: Part description refers to pipe size. Our standard tenon is 2-3/8" dia. x 4-3/ high. I.. = Inside diameter of the reducer/pole adaptor. O.. = Outside diameter of the reducer. P/N escription I.. O.. Fits How uch Play R KS-RPT-TA-2-R 2.469" O.. 1-7/8" to 2-3/8" R KS-RPT-TA-2.5-R 3.068" O.. 2-5/8" to 2-7/8" R KS-RPT-TA-3-R 3.548" 4.0" 3. O.. 3-1/ to 3-1/ How uch Play = For the in between sizes of their tenon, you have about 1/ play. Fits = ustomer's existing tenon size. Flood rackets - Used with tenon mount poles 17"17" 30" 30" 17"17" 17" 17" 17" 17" KS-PT-2-R Part# R KS-PT-3-R Part# R KS-PT-3-30-R Part# R KS-PT R Part# R KS-PT-4-R Part# R 48" " 2 KS-PT-12-R Part# R KS-PT-13-R Part# R KS-PT R Part# R KS-PT-14-R Part# R KS-PT-15-R Part# R SI Industries Inc. 3305

5 Pole asics Internal Slipfitter/Handhole overs/pole aps SQI (no drilling) Internal Slip Fitter racket U.S. Patent # 5,599,094 KA (4ISF, 5ISF) (Q90, 180) R Utilize to retrofit existing & square poles. Use with or SQI poles with wall thickness of 11 ga. (0.120) or 7 ga. (0.180). 180 slipfitters come with (1) set of plugs Q90 slipfitters come with (2) sets of plugs * o not use on round tapered or round poles KA 4ISF 180 * R KA 4ISF Q90 * R KA 5ISF 180 * R KA 5ISF Q90 * R PART# R PART# R PART# R PART# R racket cap Hole plugs Positioning rings in lowest threads 3 1/ Top View Positioning Rings Handhole overs 6-1/ 6-1/ 6-1/ 6-1/ 3-1/ 4-1/ 3-1/ 4-1/ Part #53919R Used on all square steel poles and all round steel poles 18'-0" and above except Round Tapered Steel. Part #53911R Used on all Round Tapered Steel Poles. Part #53306R Used on all ER2 & GFI options for all Square Steel Poles, and all Round Steel Poles 18'-0" and above except Round Tapered Steel. No receptacle. Part #53928R Used on all ER2 & GFI options for Round Tapered Steel Poles. No receptacle. 7" 5 3/ 3 1/ Part #53458R Used on all & Round Steel Poles under 18'-0" 2 1/ Part #158152R Used on all S & ST oral rackets 3 1/ Part # R Used on all ER2 & GFI options for & Round Steel Poles under 18'-0". No receptacle. 2 1/ 3" Part # In use cover. Used on all ER2 & GFI options Pole aps ROUN TAPERE 3" 20/25 ft. Part # / 30/50 ft. Part # / 35/39 ft. Part # ft. Part #54015 ROUN Part #54015 Part #54016 SQUARE Part #54008 Part # Part #54010 OT-ON TN120 for square pole Part #132029R Part #132030R TENON FITTER (KA RN) Part #53460R 2008 SI Industries Inc

6 Pole asics Anchor olts 3/8" x 10" GAV. STEE 10" 1" in 3/8" Used with: A kit# ollards 4 1/ OT IRE. Each anchor bolt furnished with: (2) 3/8"-16 zinc plated hex nuts and (2) U.S.S. 3/8" flat washers (7/1 I.. x 1" O.. x 5/6 thick) zinc plated 3/ x 30" STEE / 3/ x 30" GAVANIZE (FUY) 3" 30" 3/ Steel used with: A kit# SQ ST. / 8-11" OT IRE A kit# RP ST. S10G 11" OT IRE A kit# SQ ST. 11" OT IRE A kit# RP ST. 11" OT IRE Galvanized used with: A kit# SQ ST. GA / 8-11" OT IRE A kit# RP ST. GA S10G 11" OT IRE A kit# SQ ST. GA 11" OT IRE Each anchor bolt furnished with: A kit# RP ST. GA 11" OT IRE (2) 3/-10 zinc plated or galvanized hex nuts and (2) U.S.S. 3/ flat washers (13/1 I.. x O.. x 5/3 thick) zinc plated or galvanized 1" x 3 STEE / 1" x 3 GAVANIZE (PARTIAY) 3 4 1/ in. Steel used with: A kit# SQ. ST. S11H/ 11" OT IRE A kit# RP ST. 11" OT IRE 1" A kit# SQ ST. 1 OT IRE A kit# RTP ST. 20/25/30' 11" OT IRE A kit# RTP ST. 35/39' 1 OT IRE 3 1/ Galvanized used with: A kit# SQ ST. GA S11H/ 11" OT IRE A kit# RP ST. GA 11" OT IRE A kit# SQ ST. GA 1 OT IRE A kit# RTP ST. GA 20/25/30' 11" OT IRE Each anchor bolt furnished with: (2) 1"-8 zinc plated or galvanized hex nuts and A kit# RTP ST. GA 35/39' 1 OT IRE (2) U.S.S. 1" flat washers (1 1/1 I.. x 2 1/ O.. x 11/6 thick) zinc plated or galvanized 1-1/ x 4 STEE / 1-1/ x 4 GAVANIZE (PARTIAY) Anchor olt onversion Table 4 in. Steel used with: A kit# RTP ST. 39' 1 OT IRE A kit# RTP ST. 45'/50' 1 OT IRE Galvanized used with: A kit# RTP ST. GA 39' 1 OT IRE A kit# RTP ST. GA 45/50' 1 OT IRE Each anchor bolt furnished with: (2) 1 1/-7 zinc plated or galvanized hex nuts and (2) U.S.S. 1 1/ flat washers (1 3/8" I.. x 3" O.. x.16 thick) zinc plated or galvanized 1 1/ "A" = "" olt Square olt ircle 3.19" 4.50" A olt ircle olt Square SI Industries Inc. 3305

7 Pole asics ase overs ase overs " Square " Square " Square SQUARE STEE POES 4.3" tall with 4.12 sq. opening Part #122559R 4.8" tall with 5.12 sq. opening Part #122561R tall with 6.12 sq. opening Part #122563R ROUN STEE POES SR 4.3" tall with 4.12 dia. opening Part #158450R SR 4.8" tall with 5.12 dia. opening Part #158451R ROUN TAPERE STEE POES SRT " sq. x 4.8" tall with 6.1 dia. opening Part #158388R 25' SRT " sq. x 4.8" tall with 6.8 dia. opening Part #158390R 30' SRT " sq. x 4.8" tall with 7.7 dia. opening Part #158392R 35' SRT 13" sq. x 4.87 tall with 8.7 dia. opening Part #158554R 39' SRT sq. x 5. tall with 9.2 dia. opening Part #155887R(7 & 11 GAUGE) 45' SRT 14. sq. x 5.87 tall with 10.2 dia. opening Part #158571R 50' SRT 14. sq. x 5.87 tall with 10.2 dia. opening Part #158578R 2008 SI Industries Inc

8 Pole asics Pole EPAs Height 14' 16' 16' 18' 18' 28' 28' 30' 30' 35' 39' EPA* 70 PH 80 PH 90 PH 100 PH STEE SQUARE POES ROUN TAPERE STEE POES 25' 30' 35' 39' 39' 45'** 50'** STEE ROUN POES 18' 28' 30' Outside imensions aterial S07 Ga. S07 Ga. S07 Ga. S10G S10G S10G S10G olt ircle N N N Q Q S T T * OT IRES 11" olt ircle 11" olt ircle 11" olt ircle EPAs/Wall ount rackets Slotted 8" to 11" square square square square 10-1/8" sq. 10-1/8" sq. 10-1/8" sq. 1 sq. N 11" olt ircle Slotted 9" to11" Q 11" 1 11" olt ircle Slotted 9" to 11" Round Tapered Round Tapered Round Tapered 10-1/8" sq. 1 sq. 1 sq. Round 10-1/8" sq. 11" 1 olt ircle 11" olt ircle 1 olt ircle Round 10-1/8" sq. 11" S 1 1 olt ircle 1 olt ircle 11" olt ircle 1 T 13-1/ sq. 1 Round 10-1/8" sq. All SI ighting Systems poles are guaranteed to meet the EPA requirements listed. SI ighting Systems is not responsible if a pole order has a lower EPA rating than the indicated wind-loading zone where the pole will be located. aution: This guarantee does not apply if the pole/bracket/fixture combination is used to support any other items such as flags, pennants, or signs, which would add stress to the pole. SI ighting Systems cannot accept responsibility for harm or damage caused in these situations. Note: Pole calculations include a 1.3 gust factor over steady wind velocity. Example: poles designed to withstand 80 PH steady wind will withstand gusts to 104 PH. EPAs are for locations 100 miles away from hurricane ocean lines. Note: Hurricane ocean lines are the Atlantic and Gulf of exico coastal areas. For applications in Florida or anada, consult factory. ** 45' and 50' poles are two-piece; bottom is and top is. If luminaire total weight exceeds 250 lbs., consult factory. 11" Wall ount rackets 8" x 8" 8" x 8" KS O W * R Steel 2-bolt pattern Wall ount Plate for flat surfaced arm. Part# R For Patriot Small use KS-O-PTS-W-*-R Part# R KA RO W * R Aluminum 2-bolt pattern Wall ount Plate - radiused arm for use with round fixtures. Part# R KA W A 6 R Adjustable aluminum 2-bolt pattern. Standard fixture arm is not used. annot be used with top-access fixtures, hallenger, Patriot, Hilton arge or Patriot Small fixtures. Part# R SI INUSTRIES IN Alliance Road incinnati, Ohio (513) FAX (513) SI Industries Inc. 3305