REMOTE BALLAST SYSTEM

Size: px

Start display at page:

Download "REMOTE BALLAST SYSTEM"

Hilda Monica Bryan
6 years ago
Views:

Features RMOT LLST SYSTM SportsLiter Solutions Systems is an integrated modular lighting system designed to meet the demanding requirements of

ach system includes all you need to light a sporting event including pole top crossarms, optics/lamps, poles, wiring harness, electrical

The remote system crossarms are shipped factory aimed and pre-wired for reliability and cost effective installation.

connection to the pole top assembly. Steel or concrete poles are included and are matched to the wind zone and luminaire quantity per location.

SPORTSLITR SOLUTIONS System omponents ) Pole Top rossarm ssembly and Optics Pre-wired to single connectors 100% electrically tested Factory aimed

aluminum knuckle nodal finished optics Re-positioning pin Tempered glass lens Labeled with pole reference Stainless steel lens ring Labeled with

factory electrically tested 12 gauge wire olor coded Labeled with pole reference ) irect mbedded Steel Poles orrocote II protective coating (below

finished aluminum Stainless steel latches Pre-wired to single plug in connector Individual fusing Wiring entry Thermal magnetic or load break

1 Features RMOT LLST SYSTM SportsLiter Solutions Systems is an integrated modular lighting system designed to meet the demanding requirements of today s sports lighting specifications. ach system includes all you need to light a sporting event including pole top crossarms, optics/lamps, poles, wiring harness, electrical enclosures, professional lighting designs and installation help. The remote system crossarms are shipped factory aimed and pre-wired for reliability and cost effective installation. The remote ballast enclosures are pre-wired to a keyed connector so attachment of the factory built wiring harness will complete the electrical connection to the pole top assembly. Steel or concrete poles are included and are matched to the wind zone and luminaire quantity per location. This engineered system is designed to work together guaranteeing performance and long trouble free operation. SPORTSLITR SOLUTIONS System omponents ) Pole Top rossarm ssembly and Optics Pre-wired to single connectors 100% electrically tested Factory aimed Optional spill / glare control optics oncealed wiring Silicone gaskets Hot-dip Galvanized steel crossarm Lektrocote painted knuckle ie-cast aluminum knuckle nodal finished optics Re-positioning pin Tempered glass lens Labeled with pole reference Stainless steel lens ring Labeled with optic type Hubbell Gard treated hardware Stainless steel mounting bolts / S certified ) Internal Wiring Harness Pre-wired to keyed connectors 100% factory electrically tested 12 gauge wire olor coded Labeled with pole reference ) irect mbedded Steel Poles orrocote II protective coating (below grade to 6 above) oncrete Poles entrifugal Spun Pre-stressed Shipped as single piece Smooth, natural finish ) Remote allast nclosure or Lektrocote finished aluminum Stainless steel latches Pre-wired to single plug in connector Individual fusing Wiring entry Thermal magnetic or load break switch nclosed in flex conduit Kellums cable support grip Matched to pole length / S certified nchor ase Steel Poles nchor bolts and templates included Poles Galvanized steel hinges Gasketed Grounding lug Wiring schematic Pole top arraignment drawing Pole location label / S certified xial Optic Horizontal Optic Spill/Glare Optic SGV Spill/Glare Optic wtih visor Remote nclosure Pole top crossarm assembly Wiring Harness 647

2 INTGRL LLST SYSTM SPORTSLITR SOLUTIONS Features SportsLiter Solutions Systems is an integrated modular lighting system designed to meet the demanding requirements of today s sports lighting specifications. ach system includes pre-wired pole top crossarms (wired to junction boxes and distribution blocks), pre-wired integral ballast luminaires with optics and lamps, professional lighting designs and installation help. Steel or concrete poles are included and are matched to the wind zone and luminaire quantity per location.this engineered system is designed to work together guaranteeing performance and long trouble free operation. System onfiguration ) Pole Top rossarm ssembly Pre-wired to distribution blocks Junction box included for wiring connections (hot-dip galvanized) Hot-dip Galvanized steel crossarm Mounting hardware included Labeled with pole reference Labeled with optic type Tubular steel crossarms / S certified ) Integral allasted Luminaire ie-cast aluminum housing Pre-wired with cord / plug set Isolated ballast compartment from lamp Stainless steel lens ring Silicone gasketing Filtered optics uilt in lamp support Isolated wiring chamber Hubbell Gard treated hardware Lektrocote polyester powder paint Horizontal and vertical aiming indicators nvironmental spill/glare control optional Steel and concrete pole mounting options ase plate or clamp on mount available 100% electrically tested at factory Strain relief support included Fillet type welds Single phase wired 2-6 luminaires Three phase wired 7-18 luminaires Mounting hardware included Fast im system Repositioning stop nodal finished parabolic reflector Thermal shock, impact resistant tempered lens Stainless steel hinge Four point lens latching iming sights included and S certified Note, luminaires must be aimed at site xial Optic Horizontal Optic Spill/Glare Optic ) irect mbedded Steel Poles orrocote II protective coating (below grade to 6 above) Power cord support hangers (cord by others) nchor ase Steel Poles nchor bolts and templates included Power cord support hangers (cord by others) SGV Spill/Glare optic with visor oncrete Poles entrifugal Spun Pre-stressed Shipped as single piece Smooth, natural finish Poles 648

Features SLS series Sportsliter luminaires are ideally suited for recreational, collegiate and professional sporting events where quality levels of illumination and uniformity are required.

ie-cast aluminum housing Isolated ballast compartment from lamp Stainless steel lens ring Silicone gasketing Filtered optics uilt in lamp support Mounting hardware included Isolated wiring chamber

3 Features SLS series Sportsliter luminaires are ideally suited for recreational, collegiate and professional sporting events where quality levels of illumination and uniformity are required. They are equally suited for large open areas such as parking lots, storage areas and transfer yards. ie-cast aluminum housing Isolated ballast compartment from lamp Stainless steel lens ring Silicone gasketing Filtered optics uilt in lamp support Mounting hardware included Isolated wiring chamber Hubbell Gard treated hardware Lektrocote polyester powder paint Horizontal and vertical aiming indicators Fast im system Repositioning stop Super Sodium 600w hot re-strike nodal finished parabolic reflector Thermal shock, impact resistant tempered lens Stainless steel hinge Four point lens latching iming sights included nvironmental spill/glare control optional Remote ballast system available and S certified SLS SRIS SPORTSLITR SOLUTIONS Ordering Information xample: SLS H PH Watts Lamp allast eam ist. Volts Options SLS Sportsliter Wattage W Metal Halide W Metal Halide W Metal Halide W High Pressure Sodium W High Pressure Sodium Lamp Type H Metal Halide S High Pressure Sodium allast Type 0 No allast (remote head only) 2 1 HPF Regulated, Peak Lead uto, W, uto Regulated eam istribution 12 2 NM Type 2 3 NM Type 3 4 NM Type 4 5 NM Type 5 6 NM Type 6 N Narrow eam Horizontal lamp 11 M Medium eam Horizontal lamp 11 W Wide eam Horizontal lamp 11 Voltage 5 480V 4 6 Tri-Tap (120, 277, 347V) V 1 8 Quad Tap (120, 208, 240, 277V) 0 No allast (remote head only) 2 220/240V 50 Hz 3 347/480V 5 Options -3(X) 3 Prewired SOW ord (specify voltage) 7, 14-6(X) 6 Prewired SOW ord (specify voltage) 7, 14-12(X) 12 Prewired SOW ord (specify voltage) 7, 14 -F(X) Fusing: replace X with 1-120V, 2-208V, 3-240V, 4-277V, 5-480V, 6-347V fuses incl., externally mtd. 8 -PH Protective Heavy-uty Outer Hull 9 -L Unit with Lamp (shipped separately) -HO High Output 1000 or 1500W MH POM Socket (lamp not included) -SG Spill/Glare ontrol (internal faceted louver, MH only) 10 -SGV High end spill/glare control (Internal faceted louver with external visor, metal halide only). 10 -M51 ronze Lektrocote finish 1 S certified only, not UL listed. 2 Remote head units, specify wattage and lamp type to be used H for MH and S for HPS. xample: SLS100H-020. NOT: 600W HPS may not be remote ballasted and 1500W MH only. ll other wattages and sources consult factory. 4 xcept 1650W MH. For 480V 1650W, use W MH only W HPS. Single voltage only (347V). 7 For wire gauge, replace X with 6-16/3; 4-14/3; or 2-12/3. NOT: 120V 1500W units must use 14/3 or 12/3. 8 To denote voltage, replace X with 1-120V; 2-208V; 3-240V; 4-277V; 5-480V; 6-347V. 9 Hull adds 4 lbs. to total weight - shipped separately except on N/M/W optics (assembled on unit). 10 Internal faceted louvers for beam type N/M/W only. 11 Not available in HPS. Luminaire shipped as completely assembled unit. 12 Units not suitable for up aiming. 13 Lamp included. 14 Specific wire gauge and wiring methods may be required by local or national codes. onsult local inspection agencies for details prior to ordering. Note Order accessories separately. 649

4 SLS SRIS IMNSIONS SPORTSLITR SOLUTIONS SLS Integrated allast imed 40 degrees below horizontal imed 40 degrees below horizontal 22 1/2 5 33/ /8 35 3/4 xial Optics 572 mm 140 mm 511 mm 908 mm 22 1/2 36 5/8 5 1/4 Horizontal Optics 572 mm 930 mm 133 mm SLS Remote Head F G F G 20 1/8 22 1/2 4 3/ /8 18 7/8 R 9 R xial Optics 511 mm 572 mm 121 mm 305 mm 206 mm 479 mm 229 mm /2 3 1/2 13 Horizontal Optics 533 mm 572 mm 89 mm 330 mm SLS Remote Yoke 3 1/8 7/8 dia. 17/32 dia mm 22 mm 14 mm 51 mm 650

5 SLS SRIS SSORIS SPORTSLITR SOLUTIONS Ordering Information: Sportsliter System ccessories atalog Number escription Weight lbs. (kg) 4024SLS Slipfitter for 2 (2 3/8 O) tenon 4 (1.8) Slipfitter for 2 (2 3/8 O) tenon for remote head units only 4 (1.8) Heavy duty cast iron crossarm fitting for horizontal trunnion for remote heads only 3 (1.4) SLSV 1, 4 Visor assembly (10 deep) 3 (1.4) SL-HL 4 Half internal concentric louver 2 (0.9) SLS-L 4 Full internal concentric louver 3 (1.4) SL-SP 2 Polycarbonate Shield 5 (2.3) SLS--RM Remote head aiming sight - FL ft. #14/3 SOW- cord - FL ft. #16/3 SOW- cord - FL ft. #14/3 SOW- cord - FL ft. #16/3 SOW- cord - SLSF Field installed single fuse holder (120, 277 & 347V) - SLSFF Field installed double fuse holder (208, 240 & 480V) Heavy duty steel fitting 2 (0.9) Heavy duty steel crossarm fitting for remote head units only 1 (0.5) SLS Safety cable - 1 Visor adds 1.1 P (.12 m²) to Sportsliter. 2 Suitable for NM 5/6/W beam spreads W only. 3 Must use with SLS (integral ballasted) when mounting on center location of T-W3 & T-R3 style crossarm brackets. 4 NM 2-6 only. Not for use with beam type N/M/W. 5 For use with remote head only. Note For other mounting accessories, see floodlight mounting accessories. Ordering Information: SLS Mounting ccessories atalog Number Maximum Loading Weight P Weight escription Fixture Quantity lbs. (kg) ft² (m²) lbs. (kg) Round Steel Pole - rossarm Type T-R - lamps 3 to 5 1/2 dia. 1 T-R (95.3) For two fixtures 28 (12.7).8 (0.1) T-R (142.9) For three fixtures 2 70 (31.7) 1.6 (0.2) T-R (190.5) For four fixtures 106 (48) 2.5 (0.2) Wood Pole - rossarm Type T-W - Thru or Lag olt (Not Included) 1 T-W (95.3) For two fixtures 21 (9.5) 1 (0.1) T-W (142.9) For three fixtures 2 80 (36.3) 1.8 (0.2) T-W (190.5) For four fixtures 106 (48) 2.4 (0.2) 1 rossarm fitting hardware (for 5090, 4090) included. 2 One 5010 mounting bracket included. Note Galvanized available, add suffix -M T-R SL-H L SL S-V T-R2 T-W3 SL-L 4024 SLS SLS-SP T-W T-W 76 mm 914 mm 914 mm 152 mm 813 mm 3 36 dia T-R 76 mm 914 mm 914 mm 914 mm - T-W4 651

6 TPR STL POLS SPORTSLITR SOLUTIONS Features RLS and MLS high mount poles are tapered steel assemblies complete with mounting crossarms, platforms and needed wire entrance couplings. These assemblies simplify the often complicated tasks of choosing an economical, yet safe mounting system for heights above 40 The RLS is round tapered steel with angle crossarms designed for luminaire maintenance from a bucket truck or similar method. Standard finish is prime paint. The MLS pole is either multi-sided or round tapered steel, and has a field mounted angle iron or tubular cage for servicing. To accommodate periodic maintenance, steps and safety cable are also included. ach pole has a reinforced handhole and a steel base plate along with required anchor bolts and leveling nuts with washers. To ensure correct installation, bolt template is included. Pole finish may be prime painted or hot dipped galvanized. Ordering Information RLS Round Tapered RLS atalog Number 2 Steady Wind Velocity 3 Nominal Pole Height ft. (m) Max. Qty Sportsliters 1 80 MPH 100 MPH RLS RLS (15.2) 4 RLS RLS (15.2) 6 RLS RLS (15.2) 8 RLS RLS (18.2) 4 RLS RLS (18.2) 6 RLS RLS (18.2) 8 1 Sportsliter luminaire and crossarm mounting brackets are not included. 2 Includes poles, crossarms and anchorage. 3 Steady wind velocities of 80 and 100 MPH with gusts to 104 and 130 MPH respectively. MLS atalog Number 1, 2 Steady Wind Velocity Nominal Pole Height ft. (m) Max. Qty Luminaires Number of Pole Sections 80 MPH 100 MPH MLS MLS (21.3) 8 2 MLS MLS (21.3) 12 2 MLS MLS (21.3) 16 2 MLS MLS (24.4) 8 2 or 3 MLS MLS (24.4) 12 2 or 3 MLS MLS (24.4) 16 2 or 3 MLS MLS (30.5) 12 3 MLS MLS (30.5) 16 3 MLS MLS (30.5) Steady wind velocities of 80 and 100 MPH with gusts to 104 and 130 MPH respectively. atalog number includes pole, platform, and anchorage. 2 Factory supplied templates must be used when setting anchor bolts. will deny any claim for incorrect anchorage placement resulting from failure to use factory supplied template. MLS Options ue to the highly specialized application requirements for this type of pole, factory supplied options such as extra handholes, wiring outlets, pole grains, transformer mountings, galvanizing and weathering steel must be specified. onsult factory. 652

Features SLS TNNIS OURT SYSTM SportsLiter Solutions SLS Tennis ourt System is a sharp cut-off lighting system ideally suited for tennis courts, basketball courts, volleyball courts and in-line

One-piece formed and welded aluminum housing Two mills minimum of electrostatically applied powder coating xtruded aluminum door frame lear flat tempered glass lens ellular urethane foam gasketing

ballast compartment for prolonged ballast life UL 1598 wet location listed SPORTSLITR SOLUTIONS ) rms atalog Number SLT-S-1 SLT-S-2 SLT-S-7 ) Twin and Quad ouplers escription Single arm, ronze Single

Quad coupler, lack Quad coupler, Green 4 common arm for twin and quad couplers Twin couplers good for 70 and 180 orientations Mounting hardware and set screws included ) Shroud atalog Number 1

) Luminaire Logic SLT - - 1000H - HT - 8-1 Housing Watts/ Optics Volts olor Style Source SLT SLT Housing Style Version Wattage/Source 1000H 1000W MH 0400H 400W MH Optics HT Horizontal Forward Throw

7 Features SLS TNNIS OURT SYSTM SportsLiter Solutions SLS Tennis ourt System is a sharp cut-off lighting system ideally suited for tennis courts, basketball courts, volleyball courts and in-line skating parks. It s innovative luminaire design and optics minimize light spillage and keep the light where you want it - on the playing surface. One-piece formed and welded aluminum housing Two mills minimum of electrostatically applied powder coating xtruded aluminum door frame lear flat tempered glass lens ellular urethane foam gasketing oor mounted with concealed hinges Ordering Information omputer designed optics provides sharp cut-off and uniform lighting T-56 lamp included allast factory mounted on galvanized plate Isolated ballast compartment for prolonged ballast life UL 1598 wet location listed SPORTSLITR SOLUTIONS ) rms atalog Number SLT-S-1 SLT-S-2 SLT-S-7 ) Twin and Quad ouplers escription Single arm, ronze Single arm, lack Single arm, Green SLT-T-X SLT-Q-X atalog Number SLT-T-1 SLT-T-2 SLT-T-7 SLT-Q-1 SLT-Q-2 SLT-Q-7 escription Twin coupler, ronze Twin coupler, lack Twin coupler, Green Quad coupler, ronze Quad coupler, lack Quad coupler, Green 4 common arm for twin and quad couplers Twin couplers good for 70 and 180 orientations Mounting hardware and set screws included ) Shroud atalog Number 1 SHROUX-M50 SHROUX-M51 SHROUX-M57 escription Shroud, lack Shroud, ronze Shroud, Green 1 Replace X with 4-4 poles, 5-5 poles or 6-6 poles. Must be ordered when twin or quad couplers are used. ) Luminaire Logic SLT H - HT Housing Watts/ Optics Volts olor Style Source SLT SLT Housing Style Version Wattage/Source 1000H 1000W MH 0400H 400W MH Optics HT Horizontal Forward Throw Voltage 8 Quad Tap (120, 208, 240, 277V) 5 480V olor 1 ronze 2 lack 7 Green ) Round Straight Steel Pole Logic SLT M50 Nominal Nominal Mt. Shaft Shaft Gauge olor ase Size Length SLT SLT Nominal Shaft Size 4 Four inches 5 Five inches 6 Six inches Nominal Shaft Length 18 ighteen foot 20 Twenty foot Gauge Gauge Gauge Gauge Mounting ase nchor 4 base steel irect embedded steel olor 1 ronze 2 lack 7 Green 1 Six inch shafts only. 2 Four and five inch shafts only. 3 Four inch shafts only. 4 nchor base poles include base cover. 653

SPORTS LIGHTING SYSTEM DESIGN GUIDE SPORTS FLOOD A NEW TEAM WITH THE EXPERIENCE OF A PRO.

SPORTS LIGHTING SYSTEM DESIGN GUIDE SPORTS FLOOD A NEW TEAM WITH THE EXPERIENCE OF A PRO www.americansportslighting.com 2 A NEW TEAM WITH THE EXPERIENCE OF A PRO We are proud to introduce the American