STEEL. P ole P roducts
|
|
- Brook George
- 5 years ago
- Views:
Transcription
1 STEEL P ole P roducts Value. Durability. Safety.
2 SSS A Mounting Height Square Straight Steel Pole No Arm Removable Pole Cap (Tenon Option Available - See Mounting Designation) D Top Square B Wall Gauge Square Straight Steel Tube ASTM A500 Grade B Steel Pole Pole shaft shall be weldable-grade, cold-rolled, commercial quality carbon steel tubing conforming to ASTM A500 Grade B. Options include 11 gauge and 7 gauge. All Welds shall conform to AWS D1.2 using ER70S-6 electrodes. 4- Steel Plate Base Flange of fabricated hot rolled carbon steel conforming to ASTM A36 or equivalent (36 ksi minimum yield) with 2-piece Base Cover and attaching hardware. Base Cover will be fabricated from ABS plastic or metal materials. Reinforced, 3" x 5" with Cover, Stainless Steel Screw and Backbar. A Grounding Provision incorporating a tapped 1/2"-13NC hole will be welded to the handhole frame. Anchorage Kit will include four (4) L-shaped Steel Anchor s conforming to AASHTO M3-90 Grade 55. Ten inches (") of threaded end will be galvanized per ASTM A153. Kits will contain eight (8) Hex Nuts, four (4) Lock Washers, and eight (8) Flat Washers (all components Galvanized Steel). A bolt circle template will be provided. Anchorage G Base Square 27 - H Proj. 18 F Circle - Size Vibration Damper f determined necessary by Hapco, a top-mount, field installed First Mode Vibration Damper will be provided. Customer specification of the damper is available. 1'-6" C Butt Square With Cover Mounting Designation Side Drill Mount For Side Drill Mount applications specify luminaire type, quantity and orientation. A luminaire drilling template must be supplied at time of order. 18 Powder Coated, Galvanized or Powder Coated over Galvanized Finish Per Customer Specification C D F G H Butt Sq. Top Sq. Cir. Dia. Base Sq. Proj. Size 4 (11 Gauge) x 17 x 3 4 (7 Gauge) x x x 36 x x 36 x 4 Tenon Mount For Tenon Mount applications specify both Tenon diameter (2.375", 2.875", 3.5", 4", etc.) and length (3", 4", 5", 6", etc.). Dimensions in nches 2 WARNNG: Do not install light pole without luminaire.
3 A B C Total Mtg. Wall Butt Lum. maximum epa Hgt. Gauge Sq. Weight Catalog Number SSSB4-4-** SSS12B4-4-** SSSB4-4-** SSS16B4-4-** SSS18B4-4-** SSSB4-4-** SSSD4-4-** SSSB5-4-** SSSD5-4-** SSS22B4-4-** SSS22D4-4-** SSSB4-4-** SSSD4-4-** SSSB5-4-** SSSD5-4-** SSS28B4-4-** SSS28D4-4-** SSSD4-4-** SSSB5-4-** SSSD5-4-** SSSD6-4-** SSSD5-4-** SSSD6-4-** SSSD6-4-** Catalog Number System The catalog number for Hapco poles utilizes the following identification system. MOUNTNG HEGHT S S S SHAFT ASSEMBLY WALL GAUGE BUTT SQ. TOP SQ. BASE STYLE FNSH Catalog Number Example - SSS D 5-4 BA Square Straight Steel, Mounting Height, 7 Gauge, 5" Butt Square, No Taper,, Black Powder Coat Finish. Wall Gauge B = 11 Gauge D = 7 Gauge Butt Square 4 = 4" 5 = 5" 6 = 6" Top Square - = No Taper 4 = 4- Anchor Base GALV. Finish BA = Black Powder Coat BH = White Powder Coat BM = Dark Bronze Powder Coat BV = Dark Green Powder Coat GC = Gray Powder Coat = Specify Finish ** 00 = Galvanized Only (No Powder Coat) Galvanization G = Galvanized Code G to be used only if pole is to be specified Powder Paint Over Galvanized or Galvanized Only. SSS- Square Straight Steel Pole No Arm ABS plastic base covers are standard in all SSS poles specified in BA-Black, BM-Dark Bronze, and BH-White. SSS poles specified in all other colors will be manufactured of metal materials. Metal Base Covers for poles in BA, BM and BH can be specified. EPA Notes: Effective Projected Area (EPA) in square feet. EPA s calculated using wind velocity (mph) indicated in accordance with 09 AASHTO LTS-5 using a year design life. Maximum EPA is based on the luminaire weight shown. ncreased luminaire weight may reduce the maximum EPA. f weight is exceeded, or if other design life or code is required, please consult the factory. 3
4 RSS A Mounting Height Round Straight Steel Pole No Arm Removable Pole Cap (Tenon Option Available - See Mounting Designation) D Top Diameter B Wall Thickness Round Straight Steel Tube ASTM A500 Grade B Steel Pole Pole shaft shall be weldable-grade, cold-rolled, commercial quality carbon steel tubing conforming to ASTM A500 Grade B. Options include 11 gauge and 7 gauge. All Welds shall conform to AWS D1.2 using ER70S-6 electrodes. 4- Steel Base Plate of fabricated hot rolled carbon steel conforming to ASTM A36 or equivalent (36 ksi minimum yield) with 2-piece Base Cover and Attaching Hardware. Base Cover will be fabricated from ABS plastic or metal materials. 3 Butt Diameter - Reinforced, 2 x 4 with Cover And Stainless Steel Screws. A Grounding Provision incorporating a tapped 1/2-13NC hole will be welded to the handhole frame. 4+ Butt Diameters - Reinforced, 3 x 5 with Cover, Stainless Steel Screw and Back Bar. A Grounding Provision incorporating a tapped 1/2-13NC hole will be welded to the handhole frame. Anchorage Kit will include four (4) L-shaped Steel Anchor s conforming to AASHTO M3-90 Grade 55. Ten inches ( ) of threaded end will be galvanized per ASTM A153. Kits will contain eight (8) Hex Nuts, four (4) Lock Washers, and eight (8) Flat Washers (all components Galvanized Steel). A bolt circle template will be provided. Anchorage G Base Square 27 - H Proj. 18 F Circle - Size 1'-6" C Butt Diameter With Cover Powder Coated, Galvanized or Powder Coated over Galvanized Finish Per Customer Specification. C D F G H Butt Dia. Top Dia. Cir. Dia. Base Sq. Proj. Size x 17 x x 17 x x 17 x 3 5 (11 Gauge) x 17 x 3 5 (7 Gauge) x 36 x 4 Dimensions in nches Vibration Damper f determined necessary by Hapco an internal, factory installed, Second Mode Vibration Damper will be provided. Customer specification of the damper is available. Mounting Designation Side Drill Mount For Side Drill Mount applications specify luminaire type, quantity and orientation. A luminaire drilling template must be supplied at time of order Tenon Mount For Tenon Mount applications specify both Tenon diameter (2.375", 2.875", 3.5", 4", etc.) and length (3", 4", 5", 6", etc.) WARNNG: Do not install light pole without luminaire.
5 A B C Total Mtg. Wall Butt Lum. maximum epa Hgt. Gauge Dia. Weight Catalog Number RSS08B3-4-** RSS08B4-4-** RSSB3-4-** RSSB4-4-** RSSBG-4-** RSS12B3-4-** RSS12B4-4-** RSS12BG-4-** RSSB3-4-** RSSB4-4-** RSSBG-4-** RSS16B3-4-** RSS16B4-4-** RSS16BG-4-** RSS18B3-4-** RSS18B4-4-** RSS18BG-4-** RSSB3-4-** RSSB4-4-** RSSBG-4-** RSSB5-4-** RSSD5-4-** RSS22BG-4-** RSS22B5-4-** RSSB4-4-** RSSBG-4-** RSSB5-4-** RSSD5-4-** RSSBG-4-** RSSB5-4-** RSSD5-4-** RSSD5-4-** Round ABS plastic base covers are standard in all 11 Gauge RSS poles that are specified in the following powder coat finishes: BA-Black, BM-Dark Bronze, and BH-White. For 7 Gauge poles and all other colors please see Square Metal base cover note below. Catalog Number System The catalog number for Hapco poles utilizes the following identification system. MOUNTNG HEGHT R S S SHAFT ASSEMBLY WALL GAUGE BUTT DA. TOP DA. BASE STYLE FNSH GALV. Catalog Number Example - RSS B 4-4 BH Round Straight Steel, ' Mounting Height, 11 Gauge, 4" Butt Diameter, No Taper,, White Powder Coat Finish. Wall Gauge B = 11 Gauge D = 7 Gauge Butt Diameter 3 = 3" 4 = 4" G = 4.5" 5 = 5" Top Diameter - = No Taper 4 = 4- Anchor Base Finish BA = Black Powder Coat BH = White Powder Coat BM = Dark Bronze Powder Coat BV = Dark Green Powder Coat GC = Gray Powder Coat = Specify Finish ** 00 = Galvanized Only (No Powder Coat) Galvanization G = Galvanized Code G to be used only if pole is to be specified Powder Paint Over Galvanized or Galvanized Only. RSS- Round Straight Steel Pole No Arm Square Metal powder coated base covers are standard in all 11 Gauge RSS poles that are specified in colors other than BA-Black, BM-Dark Bronze, and BH-White AND in all 7 Gauge poles in ALL COLORS. Custom specification of RSS Square Metal style base covers in BA, BM and BH powder coated finishes is available. EPA Notes: Effective Projected Area (EPA) in square feet. EPA s calculated using wind velocity (mph) indicated in accordance with 09 AASHTO LTS-5 using a year design life. Maximum EPA is based on the luminaire weight shown. ncreased luminaire weight may reduce the maximum EPA. f weight is exceeded, or if other design life or code is required, please consult the factory. 5
6 RTS Round Tapered Steel Pole No Arm Removable Pole Cap (Tenon Option Available - See Mounting Designation) D Top Diameter B Wall Thickness Round Tapered Steel Tube ASTM A595 Grade A Steel Pole Pole shaft shall be weldable-grade, hot-rolled, commercial quality carbon steel tubing conforming to ASTM A595 Grade A. Options include 11 gauge and 7 gauge. All Welds shall conform to AWS D1.2 using ER70S-6 electrodes. 4- Steel Base Plate of fabricated hot rolled carbon steel conforming to ASTM A36 or equivalent (36 ksi minimum yield) with 2-piece Base Cover and attaching hardware. Base Cover will be fabricated from metal materials. A Mounting Height Up To 5.9 Butt Diameters - Reinforced, 3 x 5 with Cover, Stainless Steel Screw and Back Bar. A Grounding Provision incorporating a tapped 1/2-13NC hole will be welded to the handhole frame. 6+ Butt Diameters - Reinforced, 4 x 6-1/2" with Cover, Stainless Steel Screw and Back Bar. A Grounding Provision incorporating a tapped 1/2-13NC hole will be welded to the handhole frame. Anchorage Kit will include four (4) L-shaped Steel Anchor s conforming to AASHTO M3-90 Grade 55. Ten inches ( ) of threaded end will be galvanized per ASTM A153. Kits will contain eight (8) Hex Nuts, four (4) Lock Washers, and eight (8) Flat Washers (all components Galvanized Steel). A bolt circle template will be provided. Anchorage G Base Square 27 - H Proj. 18 F Circle - Size *Nominal 1'-6" 6 C Butt Diameter With Cover Powder Coated, Galvanized or Powder Coated over Galvanized Finish Per Customer Specification. C F G H Butt Dia. Cir. Dia. Base Sq. Proj. Size x 17 x x 17 x x x x x 3 7.0* x 36 x x 36 x x 36 x (11 Gauge) x 36 x (7 Gauge) x 48 x x 48 x x 48 x x 54 x 6 Dimensions in nches Vibration Damper f determined necessary by Hapco an internal, factory installed, Second Mode Vibration Damper will be provided. Customer specification of the damper is available. Mounting Designation Side Drill Mount For Side Drill Mount applications specify luminaire type, quantity and orientation. A luminaire drilling template must be supplied at time of order Tenon Mount For Tenon Mount applications specify both Tenon diameter (2.375", 2.875", 3.5", 4", etc.) and length (3", 4",5", 6", etc.). 18 WARNNG: Do not install light pole without luminaire.
7 A B C D Total Mtg. Wall Butt Top Lum. maximum epa Hgt. Gauge Dia. Dia. Weight Catalog Number 2-Piece Shaft Design A B C D Total Mtg. Wall Butt Top Lum. maximum epa Hgt. Gauge Dia. Dia. Weight Catalog Number RTSB45-4-** RTSB52-4-** RTSB61-4-** RTSB66-4-** RTSB61-4-** RTSB68-4-** RTSB70-4-** RTSB68-4-** RTSB70-4-** RTSB75-4-** RTSB80-4-** RTSB85-4-** RTSB90-4-** RTSD90-4-** RTSB75-4-** RTSB81-4-** RTSB85-4-** RTSB90-4-** RTSD90-4-** RTSB81-4-** RTSB90-4-** RTSD90-4-** RTSB-4-** RTSD11-4-** RTS45B-4-** RTS45D11-4-** RTS45D12-4-** RTS50B-4-** RTS50D11-4-** RTS50D12-4-** Catalog Number System The catalog number for Hapco poles utilizes the following identification system. MOUNTNG HEGHT R T S SHAFT ASSEMBLY WALL GAUGE BUTT DA. TOP DA. BASE STYLE FNSH GALV. Catalog Number Example - RTS B 80-4 BM Round Tapered Steel, ' Mounting Height, 11 Gauge, 8.0" Butt Diameter, Tapered,, Dark Bronze Powder Coat Finish. Wall Gauge B = 11 Gauge D = 7 Gauge Butt Diameter 45 = 4.5" 52 = 5.2" 61 = 6.1" 66 = 6.6" 68 = 6.8" 70 (Nominal) = 6.8" 75 = 7.5" 80 = 8.0" 81 = 8.1" 8.5 = 8.5" 9.0 = 9.0" = " 11 = 11" 12 = 12" Top Diameter - = Varies (See Table) 4 = 4- Anchor Base Finish BA = Black Powder Coat BH = White Powder Coat BM = Dark Bronze Powder Coat BV = Dark Green Powder Coat GC = Gray Powder Coat = Specify Finish ** 00 = Galvanized Only (No Powder Coat) Galvanization G = Galvanized Code G to be used only if pole is to be specified Powder Paint Over Galvanized or Galvanized Only. RTS- Round Tapered Steel Pole No Arm Square Metal powder coated base covers are standard in all RTS poles. EPA Notes: Effective Projected Area (EPA) in square feet. EPA s calculated using wind velocity (mph) indicated in accordance with 09 AASHTO LTS-5 using a year design life. Maximum EPA is based on the luminaire weight shown. ncreased luminaire weight may reduce the maximum EPA. f weight is exceeded, or if other design life or code is required, please consult the factory. 7
8 STEEL P ole P roducts Value. Durability. Safety. Proudly Supporting Our ndustry 262 Hillman Highway Abingdon, VA info@hapco.com H-1 (08-16) 16 HAPCO American Welding Society AWS D1.2 Committee American Association of State Highway and Transportation Officials AASHTO NCHRP National Electrical Manufacturers Society NEMA ANS C136 Accredited Standards Committee
LIGHT POLES FBC EPA s. Florida Building Code Guide. Advanced, State-Of-The-Art Manufacturing Combined With Exceptional Engineering and Design!
LGHT POLES 17 FBC EPA s Advanced, State-Of-The-Art Manufacturing Combined With Exceptional Engineering and Design! A 60+ year history of providing quality pole products to Lighting Professionals worldwide.
More informationCatalog Number. Notes
Catalog Number FEATURES & SPECIFICATIONS INTENDED USE Round Tapered Aluminum Pole with Single or Twin s is a special purpose light pole to provide up to 40-foot mounting heights for Roadway lighting applications.
More informationSSS Square Straight Steel
SSS Square Straight Steel Square Straight Steel Shaft One-piece construction Side, Tenon, or Pad mounting available Ground lug standard Galvanized anchor bolts and template included (4-bolt design) Base
More informationFixture Type: Date: Base Cover: Poles are Provided With a Two-Piece Formed Steel Base Cover that is Easily Assembled and Fitted Over Pole Base.
Rev. 030118 Project Name: Project Information Fixture Type: Complete Catalog #: Date: Comments: The DuraGuard DSSS Series Straight Square Steel poles are built from high strength steel tube and are available
More informationLUM SERIES-PLED w/ POLE RATED FOR 100MPH SHAFT
EXPEDITED AVAILABILITY LUM SERIES-PLED w/ POLE RATED FOR 100MPH SHAFT PROJECT NAME: FIXTURE TYPE: FIXTURE HOUSING Heavy cast low copper aluminum assembly (A360 alloy,
More informationLumark PFPRV PREVAIL POLE AND FIXTURE COMBO
DESCRIPTION The Prevail TM LED pole and fixture combination makes selection and installation of poles and fixtures simple. Included is the die-cast Prevail area, site and roadway luminaire with standard
More informationLumark PFPRV PREVAIL POLE AND FIXTURE COMBO
DESCRIPTION The Prevail TM LED pole and fixture combination makes selection and installation of poles and fixtures simple. Included is the die-cast Prevail area, site and roadway luminaire with standard
More informationService to Communication Equipment on PG&E Owned Steel Streetlight Poles with Antenna Provisions
SUMMARY This bulletin illustrates the service requirements for the specifically designed steel streetlight pole that is to be used when communication antenna attachments are needed. This bulletin also
More informationQty: L50 50W. B4 Two 12V 146 Ah. B5 One 12V 176 Ah. P4 150W Double. 4 XXX 4 hours PM 0 hours AM. 5 XXX 6 hours PM 0 hours AM PM4 45 PM6 60.
Date: Customer: Project: Type: Qty: Avanza 450 LED Solar Order Code: AV4LS - - - - - - - - - - AV4LS Series AV4LS Avanza 450 LED Solar Optics RW Type III Distribution (Wide) RN Type III Distribution (Narrow)
More informationQty: R4 Type IV Distribution. B4 Two 12V 146 Ah. B5 One 12V 176 Ah. P4 150W Double. 4 XXX 4 hours PM 0 hours AM. 5 XXX 6 hours PM 0 hours AM PM4 45
Date: Customer: Project: Type: Qty: SonneLITER LED Solar Order Code: SDSLS SDSLS Series - - - - - - - - - - SDSLS SonneLITER LED Solar Optics R Type I Distribution R Type II Distribution R Type III Distribution
More informationBavaria Downs. Chaska, MN. Lighting
Bavaria Downs Chaska, MN Lighting Jason Kinsella City View Electric, Inc. 14309 Lake Drive NE Columbus, MN 55025 Phone 651.659.9496 Fax 651.659.0905 cityviewelectric.com DESCRIPTION Lumark The Prevail
More informationTO BE USED FOR MAINTENANCE MICHIGAN DEPARTMENT OF TRANSPORTATION. 2 3/16" x 2 3/16" x 10 Ga. 12" 15.5" 1 1/2" x 1 1/2" x 12 Ga.
2 3/16" x 2 3/16" x 10 Ga. TOP VIEW 18" 1" 7/16" Hole 1 1/2" x 1 1/2" x 12 Ga. two sides only steel tubing 1 1/2" x 1 1/2" x 12 Ga. @ 18" long steel angle 15.5" 12" TRAFFIC 3/8" Hex head grade 5 steel
More informationRitorno Square Asymmetrical LED
Date: Customer: Project: Type: Qty: Ritorno Square Asymmetrical LED Order Code: RSAL RSAL Series - - - - - - - Pole Order Code: - - - Series Height Finish Options RSAL Ritorno Square Asymmetrical LED Mounting
More informationSaturn Cutoff. Order Code: Pole Order Code: Series Height Finish Options. Customer: Date: Project: Qty: Type: SAC Saturn Cutoff SAC
Date: Customer: Project: Type: Qty: Saturn Cutoff Order Code: SAC - - - - - - - - SAC Series SAC Saturn Cutoff Pole Order Code: - - - Series Height Finish Options Optics R Type II Distribution R Type V
More information1 With internal stepdown transformer 26 7 /8" (683mm)
Project: Type: _ RRSL L55 Series Mounting Height Light CCT Finish Voltage Engine Options Qty: Series RRSL Ritorno Round Symmetrical LED Mounting Height Light Engine CCT Finish Voltage Options 1 Single
More informationEXPEDITED AVAILABILITY
EXPEDITED AVAILABILITY Q S R - P L E D PROJET NAME: PROJET TYPE: OPTIAL HOUSING Heavy cast low copper aluminum (A356 alloy;
More informationSpecifications CCS1902
CCS1902 23 1/2 10 3/8 Weight: 11 lbs Specifications : All parts are durable 356 cast aluminum. All hardware provided shall be stainless steel or zinc plated steel. Available with aluminum bolt down fluted
More informationDIVISION: METALS SECTION: COLD-FORMED METAL FRAMING REPORT HOLDER: WARE INDUSTRIES D/B/A MARINO\WARE
0 Most Widely Accepted and Trusted ICC-ES Report ICC-ES 000 (800) 423-6587 (562) 699-0543 www.icc-es.org ESR-3578 Reissued 0/206 This report is subject to renewal 0/208. DIVISION: 05 00 00 METALS SECTION:
More informationCI/W_ C2 C2A CI/W_ C2 C2A
ARMS, AND BASES GUIDE ARMS, AND BASES This section showcases a vast assortment of mounting arms, s, and bases. Poles are available in steel or aluminum, with varying wall thickness. Whether classic, traditional
More informationPresby Steel, LLC. 143 East Milan Road Berlin, NH FAX:
143 East Milan Road 603-752-3022 FAX: 603-752-2821 1 S BEAMS (I Beams) Conforms to ASTM A36 Designation Web Depth/Inches Thickness Flange in Inches Area x Wt./Ft./Lbs. in Inches Width Thickness Sq. In.
More informationDesign PTS6-XX SERIES
Design PTS6-XX SERIES Arm Mount to Pole with Disconnect Unit H E C B J I D F A K G A. HEAVY DUTY ELECTRICAL DISCONNECT UNIT WITH MULTI-CONTACT CONNECTOR. B. DISCONNECT UNIT FITTER WITH PULLEY AND U-BOLT
More informationAEROSYSTEM POLE AND BRACKET SPECIFICATIONS NO PAIN, ALL GAIN ORDERING CHART FINISHES. by LSI Courtsider Sports Lighting. Installation As Easy As 1 2 3
POLE AND BRACKET SPECIFICATIONS NO PAIN, ALL GAIN 3' The Aerosystem s modular assembly process is simple genius. The components of the system have been designed to be easy to install, easy to handle, and
More informationFLAGPOLE TRUCKS & ACCESSORIES
ST-1 SERIES Cast aluminum construction with a 1 outside diameter nylon pulley on a 3/16 stainless 20NC stainless steel set screw. The top is designed to accept an ornament with a spindle screw. Maximum
More informationuse pulldowns to assign fixture # to arm locations: K K K 14W LED 27W LED 1 Full-Cutoff optics
Lines 2, 3 and 4 and line quantities applicable to SSx mounting only Project: Type: Qty: FIT # qty SERIES - OPTICS - MOUNTING - LIGHT ENGINE - CCT - FINISH - VOLTAGE - ACCESS.1 - ACCESS.2 1 OLML- - - -
More informationSECURITY PRODUCTS GENERAL PRODUCT OVERVIEW. Security Products
GENERAL PRODUCT OVERVIEW Security Products Nailor offers a complete line of Security Grilles, Registers and Diffusers. The product line includes grilles and registers for maximum, medium and minimum security
More informationSSS SERIES POLES SQUARE STRAIGHT STEEL
SSS SERIES POLES SQUARE STRAIGHT STEEL Cat.# Job Approvals APPLICATIONS Lighting installations for side and top mounting of luminaires with effective projected area (EPA) not exceeding maximum allowable
More informationInovus Solar On-Grid Solar Lighting System
On-Grid Solar Lighting System Inovus Solar On-Grid Solar Lighting System Design Advantages: Economics Permanently reduce the cost of outdoor lighting Energy generation during daytime peak (more expensive)
More informationCC/CCS21 21" Post Top Mounted, Curvilinear, LED revision 5/9/11 kim_cc21pled_spec.pdf
Catalog number: Approvals: / / / / Mtg. Fixture Electrical Module Finish Options See page 4 See page 2 See page 3 Select pole from Kim Arms and Poles Selection Guide. If pole is provided by others indicate
More informationFord Fabricated Steel Products
Ford Fabricated Steel Products Section N2 12/2000 The Ford Meter Box Co., Inc. 775 Manchester Avenue, P.O. Box 443, Wabash, Indiana, USA 46992-0443 Telephone: 219/563-3171 FAX: 1-800-826-3487 Overseas
More information80 Watt Multi-Purpose LED Area Light
JGMPAL Watt Multi-Purpose LED Area Light STANDARD Project: Type: Catalog #: WET kv Surge Protection IP65 The JGMPAL series is a group of architectural LED area luminaires designed to illuminate parking
More informationShearing, bending, and rolling capabilities are available along with fabricating from hand drawn sketches to engineered drawings.
Tazgo Machine Inc. is a full service stocking warehouse. Items we stock include carbon, aluminum & stainless steel shapes, angles, beams, flats, hex bar, bar grating, squares, CR rounds in 1018,1045 &
More informationWestinghouse Electric Corporation Distribution Apparatus Division Bloomington, Indiana Indoor-Outdoor Altitude 0-10,000 feet KV
May 975 Supersedes 8-2 F WE A, Pages -2, dated January 975 E, D, C/98 /DB Dimensions, Weights and Creep These notes apply to all ratings.. These arresters are designed for 0,000 feet. ncrease clearances
More informationTwo Seas Metalworks Shell Lane fax Rev
This catalog provides product information and pricing for our complete line of Battery Enclosures and Battery Racks designed specifically for the PV industry to hold different sized batteries from all
More informationSECTION WELDING FUME EXHAUST SYSTEM
SECTION 233500 WELDING FUME EXHAUST SYSTEM PART 1 - GENERAL 1.1 WORK INCLUDES Welding fume exhaust system and controls Accessories Additional System Equipment Engineering Support Commissioning 1.2 RELATED
More informationLEDMPAL15 15 Watt Multi-Purpose LED Area Light
LEDMPAL15 15 Watt Multi-Purpose LED Area Light Project: Type: Catalog #: STANDARD FEATURES WET 1kV Surge Protection Available in 3000k (warm white), 4000K (neutral white) and 5000K (cool white). * Long-life
More informationFlashing Arrow Panel - 615/815 T/Y
Flashing Arrow Panel - 615/815 T/Y All LED 15-Lamp Portable Flashing Arrow Panel Product Specifications American Signal Company FAP X 15 Page 1 of 8 6/11/17 2755 Bankers Industrial Drive Atlanta, GA 30360
More informationBulletin 1494V Variable Depth, Flange Operated Disconnect Switch Kits for 400 and 600 Amperes (Series A) Switches
Bulletin 494V Variable Depth, Flange Operated Disconnect Switch Kits for and Amperes (Series A) Switches ATTENTION: To prevent electrical shock, disconnect from power source before installing or servicing.
More informationMEH Series Sectionalizing Enclosures. Single-Phase and Three-Phase
MEH Series Sectionalizing Enclosures Single-Phase and Three-Phase ABB MEH Sectionalizing Enclosures ABB s MEH Sectionalizing Enclosures provide an economical and safe sectionalizing tap point for underground
More informationHeight Finish Pole Options. Mounting Lamping Finish Voltage. Metal Halide. Single. H w H070 70w H w H w 15 1 /4" (387mm) 15 3 /4"
Vektor Project: Series Reflector Mounting Lamping Finish Voltage VE Vektor R Type II Aluminum Reflector Single R5 Type V Aluminum Reflector Double M Single ' Arm M Double ' Arm W Wall T Single Fitter Type:
More informationGrinnell Grooved Fire Protection Products Grooved Fittings
Technical Services: Tel: (800) 38-932 / Fax: (800) 79-5500 www.tyco-fire.com Grinnell Grooved Fire Protection Products Grooved Fittings General Description LPCB Vd S The grooved fittings provide an economical
More informationType. Listings: The luminaire shall be NRTL certified to UL 1598 and 8750 standards for use in wet locations.
VIPER S + L Cat.# Type Job design. per formance. technology pprovals LUMINIRE POLE COMO LUMINIRE ND POLE PRODUCT IMGE(S) SPECIFICTIONS The eacon Viper luminaire is available in two sizes with a wide choice
More informationB. Base occupied space sound level estimates on ARI 885. C. Terminal heating coils shall conform to ARI 410.
PART 1 - GENERAL 1.01 Purpose: A. This standard is intended to provide useful information to the Professional Service Provider (PSP) to establish a basis of design. The responsibility of the engineer is
More informationOptions. Pole and Arm. Suitable for wet locations
Catalog number: / / / Mtg. Fixture Electrical Module Finish See page 2 See page 3 Options Pole and Arm Select pole from Kim Arms and Poles Selection Guide. If pole is provided by others indicate O.D. for
More informationFlammable Safety Cabinets RELIABILITY MORE DURABLE A SAFER WORK ENVIRONMENT. Our Quality Serves You Longer
Flammable Safety Cabinets RELIABILITY MORE DURABLE A SAFER WORK ENVIRONMENT Our Quality Serves You Longer Experience the Jamco Difference JAMCO benefits you with increased productivity, load-tested, durable
More informationSafety 14 ga. Welded Plastic Bin Security Fire Resistant Gas Cylinder
All Cabinets Ship Flyer CAB07B...Many in 48 hrs. Heavy Duty All Welded CABINETS 40 Models Safety 14 ga. Welded Plastic Bin Security Fire Resistant Gas Cylinder Powder Coated Finish Safety Cabinets are
More informationORDERING: Specify size, figure number, description, nominal pipe size or special O.D. and C-to-C dimension. C - C LOAD lb.
Fig. 2110 www.pipingtech.com/fig2110 Sway Strut with 4 of Adjustment Engineered spring supports option 1 option 2 ORDERING: Specify size, figure number, description, nominal pipe size or special O.D. and
More informationUniversal TAU-IIR Redirective, Non-Gating, Crash Cushion
TB 110927 Rev. 0 Page 1 of 5 Product Specification Universal TAU-IIR Redirective, Non-Gating, Crash Cushion I. General The Universal TAU-IIR system is a Redirective, Non-Gating Crash Cushion in accordance
More informationQty: Pole Order Code: Series Height Finish Options. R4 Type IV. R5R Type V Round. Distribution. Distribution. 4C Quadruple Cluster.
Date: Customer: Project: Type: Qty: Beta Pendant LED Order Code: BPL BPL Series - - - - - - - - BPL Beta Pendant LED Pole Order Code: - - - Series Height Finish Options Optics R Type I Distribution R Type
More informationFlagpoles & Flagpole Accessories
SportsEdge PH: 800-334-5057 www.sportsedge.com Flagpoles & Flagpole Accessories PRIDE. QUALITY. TRADITION. HALYARD SYSTEMS A halyard system s truck determines how a flagpole works. Choose from stationary,
More informationCONSTRUCTION SPECIFICATION FOR THE INSTALLATION OF ROADWAY LUMINAIRES
ONTARIO PROVINCIAL STANDARD SPECIFICATION METRIC OPSS 617 SEPTEMBER 1984 CONSTRUCTION SPECIFICATION FOR THE INSTALLATION OF ROADWAY LUMINAIRES 617.01 SCOPE 617.02 REFERENCES 617.05 MATERIALS TABLE OF CONTENTS
More informationHole-cutting. cutting a hole. After the hole has been cut all rough edges must be removed and the area within 5/8 (16mm) of the hole
Mechanical Tees Hole-cutting Shurjoint mechanical tees provide a fast and easy mid-point branch outlet, eliminating the need for welding or the use of multiple fittings. The Model M21 features a female
More informationThis catalog has been designed to assist you in selecting an
Aluminum INTRODUCTION This catalog has been designed to assist you in selecting an aluminum product which meets your specific requirements. The diverse selection of pole sizes and mounting bracket options
More informationSPORTS LIGHTING SYSTEM DESIGN GUIDE SPORTS FLOOD A NEW TEAM WITH THE EXPERIENCE OF A PRO.
SPORTS LIGHTING SYSTEM DESIGN GUIDE SPORTS FLOOD A NEW TEAM WITH THE EXPERIENCE OF A PRO www.americansportslighting.com 2 A NEW TEAM WITH THE EXPERIENCE OF A PRO We are proud to introduce the American
More informationSECURITY PRODUCTS GENERAL PRODUCT OVERVIEW. Security Products
GENERAL PRODUCT OVERVIEW Security Products Nailor offers a complete line of Security Grilles, Registers and Diffusers. The product line includes grilles and registers for maximum, medium and minimum security
More informationPole Series. Series Reflector Lens Mounting Lamping Finish Voltage. S w S w S w S w
Type: Qty: QHO Series Reflector Lens Mounting Lamping Finish Voltage QHO Quadro HO R Type II Aluminum reflector R5 Type V Aluminum reflector L S Project: Flat Glass Sagged Glass Series Reflector Lens Mounting
More informationSPECIFICATIONS EFFLUENT/SUMP DUPLEX SYSTEM ZOELLER SUBMERSIBLE DEWATERING OR EFFLUENT PUMPS
Product information presented here reflects conditions at time of publication. Consult factory regarding discrepancies or inconsistencies. MAIL TO: P.O. BOX 16347 Louisville, KY 40256-0347 SHIP TO: 3649
More informationSL12 SL12 SOLAR LED STREET / PARKING LOT LIGHT 10W,15W, 20W, 25W LED Lamp & Complete Solar Sytem
Modular design allows for longer life and greater efficiency. Philips LUMILEDS LUXEON T Up to 142 lm/w efficiency. Sold as a complete lighting system with all components necessary for a typical installation.
More informationEvolve LED Area Lighting EALS
Evolve LED Area Lighting EALS Product Features The EAL Area Light luminaires are the newest members of the GE Evolve LED Area Light family. They offer a wide range of optical patterns, color temperatures,
More informationGE Evolve LED Area Lighting Scalable EASC High Lumen
GE Evolve LED Area Lighting Scalable EASC High Lumen Product Features The next evolution of the GE Evolve EASC LED Area Light continues to deliver outstanding features, while adding greater lumen output,
More informationVERTICAL TURBINE PUMPS SECTION 115. Discharge Head and Accessories
Peerless Pump Company SECTION 115 Page 0.1 May 19, 2005 Application Data Discharge Head and Accessories INDEX DATA & DIMENSIONS ITEM Type C & CHP 4 Type FA, FRA 7 Type S & SHP 5 Type UG 6 Column Flange,
More informationINSTALLATION INSTRUCTIONS EUROLINE/EUROLINE PRO ISLAND RANGE HOOD
Read and Save These Instructions All Hoods Must Be Installed By A Qualified Installer INSTALLATION INSTRUCTIONS EUROLINE/EUROLINE PRO ISLAND RANGE HOOD Read All Instructions Thoroughly Before Beginning
More informationSection N. 09/2017 Web Revision 10/23/2017 THE FORD METER BOX COMPANY, INC. CERTIFIED TO ISO 9001: Ford Fabricated Steel Products
DQS Inc. THE FORD METER BOX COMPANY, INC. CERTIFIED TO ISO 9001:2015 10004466 Section N 09/2017 Web Revision 10/23/2017 Ford Fabricated Steel Products Contents Page Product Numbering System... 3 Information...............................................................
More information229 B-Line series Pipe Hangers & Supports
accessories offered in this section are designed to reduce installation time. wide range of types and sizes are available for various applications. Materials For maximum loading design, Carbon Steel, Forged
More informationOperating Instructions
DuroSite & SafeSite Area Light with Adapters Important Information: These instructions contain safety information, read and follow them carefully. Dialight will not accept any responsibility for injury,
More informationProject: Type: Qty: QH2L. Options QH2L 27 3 /8" 23 3 /16" 3 1 /2" O.D. Pole. Options
Quadro H LED Project: Type: Qty: QHL _ Series Mounting Optics Light Engine CCT Finish Voltage Option _ Pole Series Height Finish Options Series Mounting Optics Light Engine CCT Finish Voltage QHL Quadro
More informationPROJ. NO SECTION HYDRONIC PUMPS
SECTION 23 21 23 HYDRONIC PUMPS PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification Sections,
More informationNeoSphere CLASSIC SPHERICAL LUMINAIRE
SITE /ROADWAY NS SERIES NeoSphere CLASSIC SPHERICAL LUMINAIRE 70-175W H.I.D. 85W INDUCTION FOUR VARIATIONS Table of Contents The NeoSphere 1 Area & Path Application 2-3 Design & Site Coordination 4-5 Optical
More informationAutobahn Series ATB0 Roadway Lighting
Autobahn Series ATB0 Roadway Lighting PRODUCT OVERVIEW Features: OPTICAL Same Light: Performance is comparable to 70-250W HPS roadway luminaires. White Light: Correlated color temperature - 4000K, 70 CRI
More informationVF Series High-Pressure, High-Temperature Butterfly Valves
Product Bulletin VF Series No. 3 Issue Date 11/01/01 VF Series High-Pressure, High-Temperature Butterfly s VF Series High-Pressure, High-Temperature Butterfly s are specifically designed for a wide range
More informationProduct Specifications for Phase Over Phase GOABS(r)
1. General a) This specification covers the design, manufacture, and shipment of phase-over-phase, 1-way, 2-way, 3-way, and 4-way, gang-operated disconnecting switches, both air-break and load-break, for
More informationSECTION LIFT ARM PARKING GATES
St. Anthony of Padua Catholic Church Phase I The Woodlands, Texas JRA Proj. No. 15004 Issued for Bidding - 1/20/2016 SECTION 11 12 33.13 LIFT ARM PARKING GATES PART 1 - GENERAL 1.01 SUMMARY A. Section
More informationSOLAR HEATING SYSTEM
SECTION 13600 SOLAR HEATING SYSTEM PART 1 GENERAL 1.01 SUMMARY A. Related Sections: 1. 07600 - Flashing and Sheet Metal. 2. 07900 - Joint Sealers. 3. 15260 - Thermal Insulation (Plumbing). 4. 15410 - Piping
More information2.88 OD Universal Mast Mount
Revision A January 19, 2006 ASSEMBLY MANUAL 2.88 OD Universal Mast Mount GENERAL DYNAMICS PRODELIN CORPORATION 1500 Prodelin Drive Newton NC 28658USA Phone 828-464-4141 www.gdsatcom.com 2.88 O.D. Universal
More informationCITY OF TAMPA ADDENDUM NO. 2. DATE: June 27, Contract 15-C-00021; Howard F. Curren AWTP HPO Gearbox/Mixer Upgrades and Piping Replacement
CITY OF TAMPA Bob Buckhorn, Mayor CONTRACT ADMINISTRATION DEPARTMENT Michael W. Chucran, Director ADDENDUM NO. 2 DATE: June 27, 2016 Contract 15-C-00021; Howard F. Curren AWTP HPO Gearbox/Mixer Upgrades
More informationGrooved End Fittings. System No. Submitted By Spec Sect Para Location Date Approved Date CARBON STEEL PIPE - GROOVED FITTINGS
SEE VICTAULIC PUBLICATION 10.01 FOR DETAILS Victaulic offers a broad line of fittings in sizes through 60"/1500 in a variety of straight and reducing styles. Most standard fittings are cast of durable
More informationSECTION PIPE HANGERS AND SUPPORTS
Part I - GENERAL 1.01 SECTION INCLUDES A. The work covered under this section consists of the furnishing of all necessary labor, supervision, materials, equipment, and services to completely execute the
More informationKRANE-KING Jib & Gantry Cranes Gantries Free Standing Jibs Tension & Cantilevered Jibs Hoists
KRANE-KING Jib & Gantry Cranes Gantries Pages H.4 - H.17 Free Standing Jibs Pages H.18 - H.30 Tension & Cantilevered Jibs Pages H.31 - H.35 Hoists Pages H.36 - H.42 Index to Krane-King Jib & Gantry Cranes
More informationWIND MAP. United States
Special Wind Region (Consult Local Authorities) LOCATION V mph (m/s) Hawaii 105 (47) Puerto Rico 145 (65) Guam 170 (76) Virgin Islands 145 (65) American Samoa 125 (56) Notes: 1. Values are nominal design
More informationSteel Fabricated Coupling
Steel Fabricated Coupling Straight Connection IMPORTANT LINKS Click appropriate words to go to: Standard Limited Warranty Sales Terms & Conditions Freight Policy Returns Policy Corrosion & Product Selection
More informationTRU-WELD Stud Welding
HEAE CONCRETE ANCHOR FU WE BASE TYPE CA STU TYPE F FERRUE SUPPIE Head (H) 1/2 for all 1/4 Headed Concrete Anchors. Head Height (HT) 3/16 for all 1/4 Headed Concrete Anchors. WE STU SPECIFICATIONS WE STU
More informationGrooved End Fittings. System No. Submitted By Spec Sect Para Location Date Approved Date CARBON STEEL PIPE - GROOVED FITTINGS
SEE VICTAULIC PUBLICATION 10.01 FOR DETAILS Victaulic offers a broad line of fittings in sizes through 60"/1500 in a variety of straight and reducing styles. Most standard fittings are cast of durable
More informationVOLUME CONTROL DAMPERS
VOLUME CONTROL DAMPERS CONSTRUCTION FEATURES FRAME Roll formed 16 gauge galvanized steel channel with welded corners. X-Standard, Z-optional AXLES Roll formed 18 gauge galvanized steel. 1/2" Round chrome
More informationBore (B) Pitch Diam. Drilling Template Flanges (1) Diam of Diam of. Groove. Neck D X G A Raised Face Raised Face P Raised face
Class 300 Orifice s Pipe size Thickness of Depth of jack Jack screw s (1) screw slot size & of and raised face Hub Bevel threaded Length of of Stud stud bolts Face face face bolt circle Bolts Bolts Bolt
More informationBALL VALVE of carbon steel with welded ends / threaded ends / flanges series
with welded ends / threaded ends / flanges 34000-34500 series C ont R o L Operation Edition 05-07-2016 Ball valve series 34000-34500 is a tight on-off valve and suitable for liquid and air pipe systems.
More informationCheck Valves DN PN 80, 100, 160
47 DN 300-1000 PN 80, 100, 160 Designed to automatically prevent back flow of working medium, when transmitting non-aggressive natural gas and other non-aggressive media at the temperature ranged -60 C
More information516509_tabs 11/16/10 4:55 AM Page 1 FIRE HYDRANTS
Date Printed: November 2010 FIRE HYDRANTS or Tyton (6"),6, or 8" A EDDY FIRE HYDRANTS PARTS LIST WORKING PRESSURE: 150 PSI Note: Discontinued For Reference Only 350 PSI Working Pressure
More informationEvolve LED Area Lighting EALP
Evolve LED Area Lighting EALP Product Features The GE Evolve LED Area Light, EALP, is optimized for customers needing an energy saving LED solution while adding flexibility, style and scalability at at
More informationALUMINUM DISTRIBUTING, INC S.W. 2nd Ave. Ft. Lauderdale, FL Table of Contents
Table of Contents Page 2.........Equal & Unequal Angle Structural & Architectural Page 3.......................Flat Bar Structural Page 4.....................Flat Bar Architectural Page 5..... U Channel,
More informationVULCAN BARRIER TL-3 GENERAL SPECIFICATIONS
VULCAN BARRIER TL-3 GENERAL SPECIFICATIONS I. GENERAL A. The VULCAN BARRIER TL-3 (VULCAN TL-3) shall be a highly portable and crashworthy longitudinal barrier especially suited for use as a temporary barrier
More informationPC-125x Counter-Balanced Backdraft Damper
PC-15x Counter-Balanced Backdraft Damper Product Bulletin Code No. LIT-101180 Issued April 7, 015 Refer to the QuickLIT Web site for the most up-to-date version of this document. Since 1885, Johnson Controls
More informationSection 2. Shurjoint Grooved Fittings Flow Data / Friction Resistance Ductile Iron Grooved Fittings. Wrought Grooved Fittings
Section 2 Cast & Wrought Grooved Fittings Shurjoint Grooved Fittings... 56 Flow Data / Friction Resistance... 56 Ductile Iron Grooved Fittings 7110 / 7111 / 7112 / 7113 Elbows... 57 7120 / 7135 / 7130
More informationVULCAN BARRIER TL-3 GENERAL SPECIFICATIONS
VULCAN BARRIER TL-3 GENERAL SPECIFICATIONS I. GENERAL A. The VULCAN BARRIER TL-3 (VULCAN TL-3) shall be a highly portable and crashworthy longitudinal barrier especially suited for use as a temporary barrier
More informationFREE STANDING WORK STATION JIB CRANE
SECTION 14661 FREE STANDING WORK STATION JIB CRANE ***** Gorbel, Inc. manufacturers a broad range of material handling cranes including monorail, bridge, gantry, and jib cranes. Numerous work station and
More informationSECURITY PRODUCTS SECURITY PRODUCTS
GRILLES & REGISTERS These louvered blade grilles and registers are paired up with a lattice face plate to meet minimum security requirements. They are available for both supply and return air applications
More informationAxial Propeller Panel Fans, PAF-Series
Axial Propeller Panel Fans, PAF-Series TABLE OF CONTENTS 3 Introduction 4 Certifications & Listings 4 Options & Accessories 9 Motor Availability 11 Direct Drive Dimensional & Performance Data 14 Belt Drive
More informationA. This Section includes the following types of sectional overhead doors:
SECTION 08361 - SECTIONAL OVERHEAD DOORS PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 1 Specification
More informationPole Basics January, 2008
Pole asics Table of ontents Available Poles... Page 2 olt-on rackets... Page 3 Tenon ount rackets... Page 4 Internal Slipfitter... Page 5 Handhole overs... Page 5 Pole aps... Page 5 Anchor olts... Page
More informationStopGate TM Barrier Arm GENERAL SPECIFICATIONS
StopGate TM Barrier Arm GENERAL SPECIFICATIONS I. GENERAL All StopGate Barrier Arms shall be designed and manufactured by Energy Absorption Systems, Inc., of Chicago, Illinois. II. DESCRIPTION OF SYSTEM
More informationSection 8 AMERICAN. Flanged Pipe
Section 8 AMERICAN Flanged Pipe The principal standards covering Flanged Pipe are ANSI/AWWA C115/A21.15 and ANSI/AWWA C110/A21.10. These and other standards are referenced throughout this Section either
More informationFixed Pitch Vane Axial Fan
Fixed Pitch Vane Axial Fan Page Introduction...........................................2 Construction Features...................................3 Mounting Options.......................................3
More information