SECURITY PRODUCTS SECURITY PRODUCTS
|
|
|
- Ross Fletcher
- 5 years ago
- Views:
Transcription
1 GRILLES & REGISTERS These louvered blade grilles and registers are paired up with a lattice face plate to meet minimum security requirements. They are available for both supply and return air applications with a choice of steel or aluminum construction. Double Deflection Supply Stainless Steel - Models SG-67DV, 67D Steel - Models SG-61DV, SG-61D Aluminum - Models SG-51DV, SG-51D Suffix '-O' adds an opposed blade damper. Page 17 Page 18 Page 18 Fixed, 45 Deflection Steel - Models SG-6145, SG-6145V Aluminum - Models SG-5145, SG-5145V Suffix '- O' adds an opposed blade damper. Page 20 Page 20 Single Deflection Supply Steel - Models SG-61SV, SG-61S Aluminum - Models SG-51SV, SG-51S Suffix '- O' adds an opposed blade damper. Fixed, 0 Deflection Steel - Models SG-61F, SG-61FV Aluminum - Models SG-51F, SG-51FV Suffix '- O' adds an opposed blade damper. Page 19 Page 19 Page 21 Page 21 Models SG-67D, SG-61D, SG-6145 GRILLES These lattice face grilles are offered as an economical return air grille for minimum security applications. They are available in heavy gauge steel or heavy gauge aluminum with a selection of hole pattern designs. Steel Aluminum Model SG-LGS Model SG-LGA Page 22 Page 22 Model SG-LGS-B3 OPTIONS & ACCESSORIES A selection of mounting angles, security bars, opposed blade dampers and directional blades are the enhancements that are offered on the maximum and medium security grilles. Mounting Angles Masonry Anchor Tabs Security Bars Opposed Blade Dampers Directional Blades 4 Page 24 Page 24 Page 24 Page 25 Page 25 Options A and J shown
2 MINIMUM DOUBLE DEFLECTION SUPPLY LOUVERED S SG-67DV and D Stainless Steel Suffix '-O' adds an opposed blade damper Model SG-67DV same as the corresponding Nailor 6700 Series grilles with the addition of a lattice face for additional security. Lattice Face: 12 gauge Type 304 stainless steel with 13/16" (21) square holes on 1" (25) centers. 3/16" (5) fret bars. Other lattice configurations are available. corresponding 6700 Series. Front blades are vertical (V) or horizontal () with the rear blades having the opposite orientation. lattice face from table on page 23. FINIS OPTIONS: Standard finish is #4 Brushed Satin Polished. AW Appliance White is optional. Opposed blade damper (stainless steel) has a screwdriver slot operator accessible through face of register. 3 9/16" (90) 1 13/16" (46) RUNNER Model SG-67DV/ 17
3 MINIMUM DOUBLE DEFLECTION SUPPLY LOUVERED S SG-61DV and D SG-51DV and D Steel Aluminum Suffix '-O' adds an opposed blade damper Model SG-61DV same as the corresponding Nailor 6100 and 5100 Series range of grilles with the addition of a lattice face for additional security. FINIS OPTIONS: Lattice Face: 12 gauge steel or aluminum with 13/16" (21) square holes on 1" (25) centers. 3/16" (5) fret bars. Other lattice configurations are available. corresponding 6100 or 5100 Series. Front blades are vertical (V) or horizontal () with the rear blades having the opposite orientation. lattice face from table on page 23. Standard finish is AW Appliance White. Opposed blade damper (steel or aluminum) has a screwdriver slot operator accessible through face of register. 1 13/16" (46) 3 9/16" (90) 1 13/16" (46) 3 9/16" (90) DAMPER DAMPER Model SG-61DV/ Model SG-51DV/ 18
4 MINIMUM SINGLE DEFLECTION SUPPLY LOUVERED S SG-61SV and S Steel SG-51SV and S Aluminum Suffix '-O' adds an opposed blade damper Model SG-61S same as the corresponding Nailor 6100 and 5100 Series range of grilles with the addition of a lattice face for additional security. FINIS OPTIONS: Lattice Face: 12 gauge steel or aluminum with 13/16" (21) square holes on 1" (25) centers. 3/16" (5) fret bars. Other lattice configurations are available. corresponding 6100 or 5100 Series. Available with vertical (V) or horizontal () blades. lattice face from table on page 23. Standard finish is AW Appliance White. Opposed blade damper (steel or aluminum) has a screwdriver slot operator accessible through face of register. DAMPER DAMPER Model SG-61SV/ Model SG-51SV/ 19
5 MINIMUM FIXED RETURN 45 DEFLECTION S SG-6145 and 45V Steel SG-5145 and 45V Aluminum Suffix '-O' adds an opposed blade damper Model SG-6145 same as the corresponding Nailor 6100 and 5100 Series range of return grilles with the addition of a lattice face for additional security. FINIS OPTIONS: Lattice Face: 12 gauge steel or aluminum with 13/16" (21) square holes on 1" (25) centers. 3/16" (5) fret bars. Other lattice configurations are available. corresponding 6100 or 5100 Series. Available with vertical (V) or horizontal () blades. lattice face from table on page 23. Standard finish is AW Appliance White. Opposed blade damper (steel or aluminum) has a screwdriver slot operator accessible through face of register. DAMPER 3/4" (19) DAMPER 3/4" (19) Model SG-6145/V Model SG-5145/V 20
6 MINIMUM FIXED RETURN 0 DEFLECTION S SG-61F and FV SG-51F and FV Steel Aluminum Suffix '-O' adds an opposed blade damper Model SG-61F same as the corresponding Nailor 6100 and 5100 Series range of return grilles with the addition of a lattice face for additional security. FINIS OPTIONS: Lattice Face: 12 gauge steel or aluminum with 13/16" (21) square holes on 1" (25) centers. 3/16" (5) fret bars. Other lattice configurations are available. corresponding 6100 or 5100 Series. Available with vertical (V) or horizontal () blades. lattice face from table on page 23. Standard finish is AW Appliance White. Opposed blade damper (steel or aluminum) has a screwdriver slot operator accessible through face of register. DAMPER DAMPER Model SG-61F/V Model SG-51F/V 21
7 MINIMUM SIZING SCEDULE AND PERFORMANCE DATA: MODEL SERIES SG-LGS & SG-LGA GRILLES DAYLIGT OPENING DIMENSION NO. OF CODE A1, B1, C1 CODE A2, B2, C2 CODE A3, B3, C3 CODE A4, B4, C4 NO. OF CODE A5, B5, C5 2 1/2" x 1/2" OLES 3/4" SQ. 1/2" SQ. 13/16" SQ. 1" SQ. OLES WIDT EIGT in. mm in. mm in. mm in. mm in. mm in. mm 6 5 3/ / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / Pressure Loss Through Lattice Grille Option Code Core Velocity VP A1, B1, C1 (60%) A2, B2, C2 (50%) A3, B3, C3 (70%) Neg. SP A4, B4, C4 (68%) A5, B5, C5 (65%) VP - velocity pressure - inches w.g. Neg. SP - negative static pressure - inches w.g. Core Velocity is in feet per minute. Core represents daylight opening dimensions. 23
8 SECURITY PRODUCT OPTIONS & ACCESSORIES Options and Accessories MOUNTING ANGLES: Option A 1" x 1" x 1/8" (25 x 25 x 3) welded rear angle frame. Shipped loose for field attachment (weld or bolt). Option B 4 pcs. 1" x 1" x 1/8" (25 x 25 x 3) mounting angles, with holes and bolts. Shipped loose for field attachment. Option C 2 pcs. 1" x 1" x 1/8" (25 x 25 x 3) mounting angles (long dim.). Shipped loose for field attachment (weld or bolt). MASONRY ANCOR TABS AND SECURITY BARS: Option D 1/2" (13) dia. steel anchor tabs. 3" (76) long for concrete or brick walls. Minimum one per side. Option E 2 1/2" x 3/8" (64 x 10) flat security bars welded in sleeve, 4" (102) max. on center. Option F 1/2" (13) dia. round security bars welded in sleeve, 6" (152) max. on center. Option G Barrier Grille. 1/2" (13) dia. round security bars, vertical and horizontal, 6" (152) max. on center welded to sleeve and at each crosspoint. Option Barrier Grille. 3/4" (19) dia. vertical bars with 2" x 1/4" (51 x 6) horizontal flat bars welded to sleeve and at each cross-point. 24
9 SECURITY PRODUCT OPTIONS & ACCESSORIES Options and Accessories DAMPERS: Option J Opposed Blade Damper. Face operator (screwdriver slot or lever). Option K Opposed Blade Damper. Rear operator (screwdriver slot). OPERATOR OPERATOR DIRECTIONAL S: Option L Adjustable single deflection horizontal blades on 3/4" (19) centers. Option M Adjustable single deflection vertical blades on 3/4" (19) centers. Option N Adjustable double deflection blades on 3/4" (19) centers. orizontal front blades. Option P Adjustable double deflection blades on 3/4" (19) centers. Vertical front blades. Important note for all options and accessories: Not all options shown, or certain combinations, are necessarily available on individual security products. Consult the individual model description to determine which options apply. 25
SECURITY PRODUCTS GENERAL PRODUCT OVERVIEW. Security Products
GENERAL PRODUCT OVERVIEW Security Products Nailor offers a complete line of Security Grilles, Registers and Diffusers. The product line includes grilles and registers for maximum, medium and minimum security
SECURITY PRODUCTS GENERAL PRODUCT OVERVIEW. Security Products
GENERAL PRODUCT OVERVIEW Security Products Nailor offers a complete line of Security Grilles, Registers and Diffusers. The product line includes grilles and registers for maximum, medium and minimum security
SECURITY PRODUCTS GENERAL PRODUCT OVERVIEW. Security Products
GENERAL PRODUCT OVERVIEW Security Products Nailor offers a complete line of Security Grilles, Registers and Diffusers. The product line includes grilles and registers for maximum, medium and minimum security
GRILLES AND REGISTERS
HEAVY DUTY STAINLESS STEEL This grille is used mainly for return air applications that require strength and durability in corrosive or high humidity environments. The frame is welded and the blades are
LINEAR DIFFUSERS AND BAR GRILLES
49-240 48LL1 49-280 49-480 48LL2 Linear ar Grilles The Nailor 4900 Series provides an extruded aluminum bar grille that offers beautiful styling and efficient performance. Linear bar grilles offer a choice
DRUM LOUVERS DRUM LOUVERS 45DL SERIES. Models: 45DL1 Single Vanes 45DL2 Split Vanes G151 HIGH CAPACITY LONG THROW ALUMINUM CONSTRUCTION
DRUM LOUVERS 45DL SERIES HIH CAPACITY LON THROW ALUMINUM CONSTRUCTION Models: Single Vanes 45DL2 Split Vanes Suffix '-O' adds a steel opposed blade damper Models -O and 45DL2 Model Series 45DL Drum Louvers
LINEAR DIFFUSERS AND BAR GRILLES
LINEAR DIFFUSERS AND AR GRILLES LINEAR DIFFUSERS AND AR GRILLES LINEAR SLOT DIFFUSER PLENUMS FOR TECHZONE TYPE CEILINGS Model Series 5300TZ Plenums are designed to fit the 5000TZ Series Slot Diffusers.
GRILLES AND REGISTERS
Heavy Duty Steel rilles and Registers, ymnasium Strength Nailor s Heavy Duty Steel rilles and Registers are manufactured with 16 gauge steel frames and 14 gauge steel blades which gives them strength to
LOUVERED FACE GRILLES AND REGISTERS
Performance Notes for Supply rilles and Registers, 6 and 67 Series Throw, Spread and Drop The isovel diagrams shown below, illustrate in plan view, the relationship of horizontal spread to throw for three
GRILLES AND REGISTERS
RILLES AND REISTERS RETURN AIR FIXED BARS This return air grille has extruded aluminum fixed blades that are reinforced for strength. Models H-HD, V-HD, FH-HD, FV-HD Page 1 Suffix '-O' adds a steel OBD
GRILLES AND REGISTERS
RILLES AND REISTERS Models 45DL1, 45DL2 Models 813SH-O, 813DV Drum Louvers These extruded aluminum drum louvers are appropriate when high volumes of air are used and in spot heating and cooling applications.
MODULAR CORE CEILING DIFFUSERS
MOEL SQUARE 12345-10 MOULAR CORE SQUARE IFFUSERS ROUN NECK SQUARE 1, 2, 3 OR ROUN 4-WAY AJUSTABLE NECK SQUARE ISCHARGE ROUN PATTERN NECK Steel Model: 7500 Suffix '-O' adds a steel opposed blade damper
GRILLES AND REGISTERS
Curved Spiral Duct rilles Nailor s unique curved spiral duct grille design offers an architecturally superior appearance and saves installation time and money by directly mounting to the duct. This eliminates
CEILING DIFFUSERS D12 CEILING DIFFUSERS
PREMIUM This perforated return has an extruded aluminum frame with a narrow border that is visible within the T-Bar module. See Model Series 4330 and 4330CB for the matching supply air diffusers. Flush
GRILLES AND REGISTERS
Heavy Duty Steel rilles and Registers, ymnasium Strength Nailor s Heavy Duty Steel rilles and Registers are manufactured with 16 gauge steel frames and 14 gauge steel blades which gives them strength to
GRILLES AND REGISTERS
Airfoil Blade Return Air Models 71FH, 7145H 45 Deflection, 3/4" (19) Blade Spacing The airfoil blades are fixed at a 45 angle. This grille is vision proof when installed in a low or high sidewall location
GRILLES AND REGISTERS
AIRFOIL BLADE RETURN AIR 45 DEFLECTION, 3/4 () BLADE SPACIN The airfoil blades are fixed at a 45 angle. This grille is vision proof when installed in a low or high sidewall location with grille blade deflection
GRILLES AND REGISTERS
RILLES AND REISERS HEAVY DUY SAINLESS SEEL his grille is used mainly for return air applications that require strength and durability in corrosive or high humidity environments. he frame is welded and
GRILLES AND REGISTERS
ECRATE RETURN AND EXHAUST RILLES The eggcrate grilles and registers are constructed of thin, interlocked aluminum or stainless steel strips assembled in a square grid fashion that is available in a variety
GRILLES AND REGISTERS
Models 51EC, 67EC Models 51PR, 67PR Eggcrate Return and Exhaust rilles The eggcrate grilles and registers are constructed of thin, interlocked aluminum or stainless steel strips assembled in a square grid
GRILLES AND REGISTERS
RILLES AND REISTERS DOOR/ TRANSFER RILLES Nailor provides an assortment of door grilles that are designed to be completely sight proof and unobtrusive in appearance. They are constructed using extruded
NAILOR COMMERCIAL REGISTERS, GRILLES AND DIFFUSERS
INDEX CEILING DIFFUSERS... 9-2 ARCHITECTURAL (LAY-IN T-BAR)... 9-2 SQUARE (LAY-IN T-BAR ) 3 CONE... 9-2 SQUARE (LAY-IN T-BAR) 4 CONE... 9-2 SQUARE (LAY-IN T-BAR) ADJUSTABLE SLIDING TYPE... 9-2 SQUARE (PANEL
CEILING DIFFUSERS GENERAL PRODUCT OVERVIEW
CEILING IFFUSERS CEILING IFFUSERS GENERAL PROUCT OVERVIEW Ceiling iffusers Quality Assured Products, unobtrusive clean lines for appearance, careful engineering and professional workmanship with the backing
GRILLES AND REGISTERS
HEAVY DUY SAINLESS SEEL his grille is used mainly for return air applications that require strength and durability in corrosive or high humidity environments. he frame is welded and the blades are spaced
CEILING DIFFUSERS GENERAL PRODUCT OVERVIEW
GENERAL PROUCT OVERVIEW Ceiling iffusers Quality Assured Products, unobtrusive clean lines for appearance, careful engineering and professional workmanship with the backing of an industry leader - these
GRILLES AND REGISTERS
RILLES AND REISERS CURVED SPIRAL DUC RILLES Nailor s unique curved spiral duct grille design offers an architecturally superior appearance and saves installation time and money by directly mounting to
CEILING DIFFUSERS CEILING DIFFUSERS
CEILING IFFUSERS "TWISTER" HIGH INUCTION STAMPE FACE The "Twister" diffuser is engineered to optimize air distribution effectiveness. This next generation diffuser has a high induction, 360 swirl pattern
CEILING DIFFUSERS GENERAL PRODUCT OVERVIEW
GENERAL PROUCT OVERVIEW Ceiling iffusers Quality Assured Products, unobtrusive clean lines for appearance, careful engineering and professional workmanship with the backing of an industry leader - these
Application Guidelines
Grilles and Registers Application Guidelines Introduction Overview It is the intent of this section to give some basic application guidelines for the use of supply and return grilles and registers in a
PATTERN CEILING DIFFUSERS
PATTERN CEILING IFFUSERS Model 4260 Model 7500 Eggcrate Return This aluminum face return diffuser features 1/2" x 1/2" x 1/2" (13 x 13 x 13) eggcrate that provides a high free area. It is offered with
PERFORATED CEILING DIFFUSERS
PERFORAE PERFORAE CURVE MOEL BLAE 12345-10 IFFUSERS SQUARE ROUN NECK SQUARE SUPPLYROUN NECK 4-WAY AJUSABLE ISCHARGE SQUARE ROUN NECK PAERN (SANAR) 1, 2 OR 3-WAY ISCHARGE PAERN (OPIONAL) Steel Models: 4320CB
B1-2. Table of Contents LOUVERED FACE DIFFUSERS
1 LOUVERED FACE DIFFUER Table of Contents LOUVERED FACE DIFFUER 12 1400, 1400FR, 1400, M1400 & M1400 These supply diffusers feature a round neck and four cones. 1400A & 1400A These supply diffusers feature
EGG CRATE RETURN GRILLE
80 EGG CRATE RETURN GRILLE 80 The 80 Series is available in various mounting styles and features sturdy construction, consisting of a heavy gauge aluminum grid core, optional extruded aluminum borders
CEILING DIFFUSERS CEILING DIFFUSERS
Model 4340M Model 4330CB Premium, Curved Blade Pattern Controllers The perforated diffusers in this series have an extruded aluminum frame with a narrow border that is visible within the T-Bar module.
PERFORATED CEILING DIFFUSERS
PERFORAE MOEL PERFORAE 12345-10 CEILING SQUARE IFFUSERS ROUN NECK SQUARE ROUN NECK SUPPLY SQUARE 1, 2, 3 OR ROUN 4-WAY AJUSABLE NECK ISCHARGE PAERN Steel Models: 4320 Flush Face 4325 rop Face Aluminum
GRILLES AND REGISTERS
RILLES AND REISERS REURN AIR FIXED BARS his return air grille has extruded aluminum fixed blades that are reinforced for strength. Models 51H-HD, 51V-HD, 51FH-HD, 51FV-HD Page 144 Suffix '-O' adds a steel
L1-2. Table of Contents SECURITY GRILLES 1310, 1310TF, Introduction & Dimensional Information... L1-13
L Table of Contents 0, 0TF & 50 These perforated face supply grilles feature 5/6 diameter holes on 7/6 staggered centers. This perforated face supply grille features /6 diameter holes on 9/2 staggered
CEILING DIFFUSERS CEILING DIFFUSERS
"TWISTER" HIGH INUCTION STAMPE FACE The "Twister" diffuser is engineered to optimize air distribution effectiveness. This next generation diffuser has a high induction, 360 swirl pattern for a superior
Dimensional Data Curb Optional Glass Damper Hood. A B C Size (O.D.) Size (O.D.) Qty Size Actuator Qty
Submittal Data Model PELV-100 Penthouse Elevator Vented Hood Application and Design The PELV-100 Penthouse Elevator Vented Hood is a gravity ventilator penthouse with an 18" x 18" gasketed access door
CEILING DIFFUSERS CEILING DIFFUSERS
CEILING IFFUSERS "TWISTER" HIGH INUCTION STAMPE FACE The "Twister" diffuser is engineered to optimize air distribution effectiveness. This next generation diffuser has a high induction, 360 swirl pattern
Incorporating V2.1. Product spec >>> > Series ECG - Egg crate grilles
Incorporating V2.1 Product spec >>> > Series ECG - Egg crate grilles Grilles Egg crate Recommended for: Wall, ceiling & duct Extract Overview Industry standard extract grille Plastic egg crate core optional
B1-2. Table of Contents LOUVERED FACE DIFFUSERS
B1 LOUEED FACE DIFFUE Table of Contents LOUEED FACE DIFFUE B12 1400, 1400F, 1400, M1400 & M1400 feature a round neck and four cones. 1400A & 1400A feature a round neck, four cones, and adjustable pattern
HCD-230 Industrial Control Damper
Application and Design Model is a heavy duty industrial control damper with a flanged frame. It is designed to control airflow and provide shut off in HVAC or industrial process control systems. A variety
aj manufacturing company custom and stainless air distribution products
aj manufacturing company custom and curved blade single deflection supply grille SSCB (1, 2, 3 & 4-way deflection) stainless steel... 9-5 door grille SSDG stainless steel... 9-5 eggcrate SSec stainless
Price O.R. Systems AIR CURTAIN SYSTEM
Price O.R. Systems AIR CURTAIN SYSTEM The Price Air Curtain System includes non-aspirating laminar flow diffusers directly above the surgical area with a surrounding four-sided linear slot diffuser system
ARROW UNITED INDUSTRIES
IP-3R ARROW UNITED INDUSTRIES Building Tomorrow s Ventilation Today Heavy Duty Dampers Industrial, Power Plant & Commercial Applications ARROW UNITED INDUSTRIES has specialized in the design and manufacturing
HCD-135. Industrial Control Damper. Application and Design. Ratings (see page 2 and 3 for specific limitations) Standard Construction.
Application and Design Model is a heavy duty industrial control damper with a flanged frame. It is designed to control airflow and provide shut off in HVAC or industrial process control systems. A variety
Application Guidelines
Grilles and Registers Application Guidelines Introduction Overview It is the intent of this section to give some basic application guidelines for the use of supply and return grilles and registers in a
ARROW INDUSTRIAL PRODUCTS
IP-2R ARROW INDUSTRIAL PRODUCTS For Applications in Industrial, Power Plant & Commercial Projects ARROW UNITED INDUSTRIES ARROW UNITED INDUSTRIES has specialized in the manufacturing of air control products
INLET BOXES AND INLET-BOX DAMPERS
INLET BOXES AND INLET-BOX DAMPERS Available on these Arrangement 1, 4, 8, 9, 9F, and 10 fans: GENERAL PURPOSE FANS ACOUSTAFOIL/PLR FANS CLASS IV FANS AF FANS RTS FANS GI FANS HPBC FANS BC FANS BCPB FANS
CEILING DIFFUSERS CEILING DIFFUSERS. Aluminum Construction Model 6300R See Page D135. Fully Adjustable Horizontal/Vertical Pattern
6 Model TWR "Twister" High Induction Stamped Face The "Twister" diffuser is engineered to optimize air distribution effectiveness. This next generation diffuser has a high induction, 360 swirl pattern
CONTROL DAMPERS. Model Model 1370CB. Model 1380CB. Model 1390CB B7
CONTROL DAMPERS MODEL 1380 HIGH PERFORMANCE ACKDRAFT DAMPER EXTRUDED ALUMINUM HEAVY DUTY Model 1380 is a high performance extruded aluminum gravity operated backdraft damper for use in medium to heavy
Square/Rect. and Square Louvered Face and Plaque Face Diffuser
/Rect. and Louvered Face and Plaque Face Diffuser Series J: Easily Adjustable from Horizontal to Vertical Vertical Discharge Application: Carnes steel (SK) and aluminum (SE) louvered face diffusers are
Series DD & SD-20 Supply Grilles & Registers
Series DD & SD-20 Supply Grilles & Registers Grille - Two Sets of Louver Blades Model DDL-20 Two sets of louver blades. Front set parallel to long dimension. Rear set parallel to short dimension. All louver
INDEX. Chapter3. air master. Linear Bar Grilles
Chapter3 INDEX A Linear bar grilles: 1. Supply linear bar grille...: ASLG...3.1 2. Supply linear bar register...: ASLR...3.2 3. Return linear bar grille...: ARLG...3.3 4. Return linear bar register...:
FIRE RATED PRODUCTS FIRE RATED PRODUCTS
IRE RTED PRODUCTS IRE RTED DUCTLESS RETURN ILTER GRILLES Model Series 4100 Ductless Return ir ilter Grilles have been designed to compliment the Nailor range of fire rated supply diffusers. These grilles
K1-2. Table of Contents LINEAR BAR GRILLES 1500, 1500MC, 1800, 1800MC
K Table of Contents, This series of extruded aluminum supply and return linear bar grilles are for ceiling, sidewall, sill (), and floor () applications. Blade thickness is 7/32., This series of extruded
Model S3HS. Model S3VS. Vertical Blades, 0 Deflection 3/4" Spacing. Model S3VOS with Opposed Blade Damper Vertical Blades, 0 Deflection 3/4" Spacing
model S3 Steel Return Grilles & Registers 0 Deflection 0 fixed blade deflection maximizes free area for low pressure loss and sound levels Potential line of sight into duct thru grille is acceptable using
STEEL LOUVERED DIFFUSERS [CFM Range is only a guide. See Manufacturer Catalog for complete data. All NC Levels in Acceptable Range<32.
STEEL LOUVERED DIFFUSERS TUTTLE & BAILEY Model 1300 - Round Neck Steel, Lay-In Tee Bar Mounting Neck Size Panel Size CFM Range Price Each Volume Damper Model RBN *6 12 x 12 75-180 $19 $12 6 24 x 24 75-180
Product Nomenclature G-X-AB-Z 0 = Zero Degree, 1 = 15 Degree, 2 = 15 Degree (2-way)
Fixed Bar Grills - Series G Description Caryaire Fixed Bar Grills are ideal for Supply as well as Return air, in both Cooling as well as Heating. It can be used in high side wall or ceiling applications.
Incorporating V2.0. Product spec >>> > Series DD - Double deflection grilles
Incorporating V2.0 Product spec >>> > Series DD - Double deflection grilles Grilles Double deflection Recommended for: Wall, ceiling & duct Supply & extract Overview Enhanced functionality As per the name,
CEILING DIFFUSERS. Supply Air
Perforated Ceiling iffusers Nailor manufactures a full range of supply air and matching return air Perforated Ceiling iffusers. he perforated face is available in both corrosion-resistant steel and aluminum,
CEILING DIFFUSERS CEILING DIFFUSERS. Aluminum Construction Model 6300R See Page D135. Fully Adjustable Horizontal/Vertical Pattern
6 Model TWR "Twister" High Induction Stamped Face The "Twister" diffuser is engineered to optimize air distribution effectiveness. This next generation diffuser has a high induction, 360 swirl pattern
DAMPERS FOR COMMERCIAL & INDUSTRIAL APPLICATIONS IN HEATING, VENTILATING & AIR CONDITIONING
PUB. NO. 732-3 DAMPERS FOR COMMERCIAL & INDUSTRIAL APPLICATIONS IN HEATING, VENTILATING & AIR CONDITIONING The most widely used dampers in commercial HVAC applications Control Dampers - Extruded Aluminum
HORD HOSPITAL OPERATING ROOM AIR CURTAIN
HORD HOSPITAL OPERATING ROOM AIR CURTAIN The Hospital Operating Room Diffuser (HORD) air curtain system is engineered specifically for the demanding needs of operating room environments. The HORD air curtain
M1-2. Table of Contents INDUSTRIAL GRILLES. 680, 5680, 6880, 56880, 680MP, 5680MP Introduction... M1-3 Dimensional Data... M1-4
1 Table of Contents & These industrial supply grilles feature adjustable, single deflection, extruded aluminum airfoil blades with a steel or extruded aluminum frame. Horizontal or vertical blades at 1
Incorporating V2.0. Product spec >>> > Series NV - Non vision grilles
Incorporating V2.0 Product spec >>> > Series NV - Non vision grilles Grilles Non-vision Recommended for: Wall & door Supply & extract Overview Block line of sight into private areas Giving adequate ventilation
Extruded Aluminum Construction 1/4 Bars on 1/2 Centers Floor, Sidewall or Ceiling Mount Pencil Proof
OVERVIEW Linear Bar, Grilles and Registers OVERVIEW LINEAR BAR, GRILLES and REGISTERS Curtainaire Trimaire Varicore Extruded Aluminum Construction 1/4 Bars on 1/2 Centers Floor, Sidewall or Ceiling Mount
Motorized Fire Dampers
Model : OMFD-611 (Fusible link and spring return actuator) GI steel sheet construction In accordance with UL555 & UL555S suitable for installation in walls and partitions having rating 2 Hrs. Static and
Premium Correctional Air Distribution. The First Name in Air Diffusion.
Premium Correctional Air Distribution The First Name in Air Diffusion www.anemostat.com PRODUCT DIRECTORY APPLICATIONS Stainless Steel S-Vent MAXIMUM SECURITY GRILLES NEW CONSTRUCTION page 16 page 4 &
EX C E L L E N C E ISO 9001 CERTIFIED COMPANY LINEAR BAR GRILLES.
25 YEARS OF EX C E L L E N C E ISO 9001 CERTIFIED COMPANY 3.0 INDEX ISO 9001 CERTIFIED COMPANY SECTION TOPIC PAGE 3.1 Double deflection linear bar grille ASLG 3 3.2 Double deflection linear bar register
4880 This heavy duty, double deflection, supply grille features 1/2 front and 3/4 back blade. spacing. Available in steel construction only.
I1I Table of Contents 1/51 1M/51M These supply grilles feature individually adjustable curved blades. Available in steel or aluminum construction. /5 These single deflection supply grilles feature 3/ blade
ISSUE B, OCT Architectural Square Ceiling Diffusers. UNI & AUNI Diffusers. Advanced Air
ISSUE B, OCT 2009 Architectural Square Ceiling Diffusers UNI & AUNI Diffusers Product Overview - Uni Series Architectural Ceiling Diffusers Uni Series High Performance Square Face Round Neck The Model
INDEX. Chapter1 1. A. Jet diffusers 1. Jet diffuser...: AJD-P
Chapter1 1 INDEX A. s 1....: AJD-P...11.1 Standard sizes...11.1 Fixing details...11.2 Panel arrangement...11.2 How to order...11.2 B. Air flow data 1. at o o position...: Tab: 11.1 (A)...11.3 2. at o position...:
makes sure products are delivered Products are offered in steel,
Residential Construction Features Residential Registers, Grilles & Diffusers No one satisfies the demands for For example: an electro-deposition air distribution solutions better than paint creates a flawless
Supplemental Information Control Damper Panel & Jackshaft Arrangements Volume Control Damper Models: AC1, AC2, 515, 516, 525, 526, AC18, AC19
Supplemental Information Control Panel & Jackshaft Arrangements Volume Control Models: AC1, AC2, 515, 516, 525, 526, AC18, AC19 Page 1 of 6 I. Panel and jackshaft arrangements are produced for assembly
CONTROL DAMPERS. Models 1810 & Model Model Model 1370
CONTROL DAMPERS CONTROL DAMPERS MODELS 1810 & 1820 MANUAL ALANCING DAMPERS STEEL Models 1810 and 1820 have been engineering and designed for manual balancing applications in low to medium pressure and
VANEAXIAL & TUBEAXIAL FANS
BULLETIN 482 July 2008 VANEAXIAL & TUBEAXIAL FANS Type "S" Belt Driven Featuring Welded Steel Propellers Models VSBD & TSBD Model TSBD Belt Driven Tubeaxial Type "S" Vaneaxial & Tubeaxial Fans For applications
Duct-D-Fuser Terminal Outlets Product Guide
United McGill products Duct-D-Fuser Terminal Outlets Product Guide Duct Registers Factair Industrial Diffusers Perforated Grilles An enterprise of United McGill Corporation Family owned and operated since
Model ABV Pressure Independent Automatic Balancing Valve. Application: Standard Construction: Performance: Configurations Available:
Model ABV Tag: Project: Location: Date: Engineer: Contractor: Architect: Submitted by: Application: The ABV Automatic maintains a constant airflow volume in HVAC applications. The highly engineered damper
All-steel construction For installation of #16 diffuser when not using a damper. Golden Sand enamel finish. 12 Butterfly Damper
11 Duct Ring All-steel For installation of #16 diffuser when not using a damper Golden Sand enamel finish Size A 6 7-1/2 8 9-1/2 10 10-7/8 12 12-7/8 14 14-7/8 18 18-3/16 11 Available Sizes (in.) 6, 8,
SD-1250 and SD-1600 Series Smoke Dampers
SD-1250 and SD-1600 Series Smoke Dampers Product Bulletin Code No. LIT-1201592 Issued January 30, 2014 Supersedes October 14, 2013 Johnson Controls provides a leakage-rated damper for life safety smoke
HORD HOSPITAL OPERATING ROOM AIR CURTAIN
HORD HOSPITAL OPERATING ROOM AIR CURTAIN The Hospital Operating Room Diffuser (HORD) air curtain system is engineered specifically for the demanding needs of operating room environments. The HORD air curtain
PRODUCT MANUAL Gecko Wireless One Zone LED Dimmer and Receiver
Product Description The Gecko Wireless One Zone Wall LED Dimmer has been designed to bring light control easily. No wires or switch box locations are needed, just stick or mount the Gecko to any flat location
C O L M A N. Air Distribution LINEAR BAR GRILLES T SERIES SERIES
C O L M A N Air Distribution E N G I N E E R E D A I R P R O D U C T S LINEAR BAR GRILLES T SERIES T SERIES C O L M A N Air Distribution E N G I N E E R E D A I R P R O D U C T S LINEAR BAR GRILLES T SERIES
Control Dampers and Fire Dampers. Volume 1 - March Insulated Control Dampers. Non-Insulated Control Dampers. Framing. Accessories.
Insulated Control Dampers 2 Volume 1 - March 2010 6 Non-Insulated Control Dampers 8 Framing Accessories 9 Jack Shaft Steel Control Dampers Fire Dampers 10 11 Control Dampers and Fire Dampers 3900 Insulated
General TAHVIEH HAMOON Airfoil Centrifugal Fans Utilize the latest design techniques to product a quiet highly efficient air mover.
General TAHVIEH HAMOON Airfoil Centrifugal Fans Utilize the latest design techniques to product a quiet highly efficient air mover. Aerodynamically designed blades and air passages allow more air to be
MODEL OAL. Water Penetration. Water Penetration. Free Area OAL PERFORMANCE REGISTERS GRILLES &
MODEL OAL The OAL series of etruded aluminum stationary louvers is manufactured for installation in eterior wall openings. They are designed to allow fresh air and ehaust air to flow into/out of the building
LINEAR DIFFUSERS AND BAR GRILLES
LINEAR DIFFUSERS AND AR GRILLES GENERAL PRODUCT OVERVIEW Linear Diffusers and ar Grilles Linear type diffusers and grilles have been developed to satisfy architectural and engineering applications that
VOLUME CONTROL DAMPERS
VOLUME CONTROL DAMPERS CONSTRUCTION FEATURES FRAME Roll formed 16 gauge galvanized steel channel with welded corners. X-Standard, Z-optional AXLES Roll formed 18 gauge galvanized steel. 1/2" Round chrome
INDEX. Chapter2. air master. Grilles and Registers
Chapter2 INDEX A.Grilles and registers. 1. Supply air grille - front horizontal blades...: ASG-H...2.1 2. Supply air grille - front vertical blades...: ASG-V...2.2 3. Supply air register - front horizontal
SECTION AXIAL HVAC FANS
SECTION 233413 - AXIAL HVAC FANS 1. PART 1 GENERAL 1.1. RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification
SERIES GP. Security Grilles
PUBLICATION GRILLES 10 JUNE 16 Features - Robust 2mm Thick Stainless Steel Fascia. - Available for Air Supply, Air Extract or Air Transfer Applications. - High Security Rear Bolt Fixings. - Screwdriver
C O L M A N. Air Distribution PERFORATED FACE DIFFUSERS P SERIES SERIES
C O L M A N Air Distribution E N G I N E E R E D A I R P R O D U C T S PERFORATED FACE DIFFUSERS P SERIES P SERIES PERFORATED FACE DIFFUSERS P SERIES QUALITY AND EFFICIENCY WITHOUT COMPROMISE Application:
CONTROL DAMPERS GENERAL PRODUCT OVERVIEW MODELS 1010 & 1020 LOW LEAKAGE CONTROL DAMPER VEE GROOVE BLADE MODELS 1012 & 1022 STANDARD CONTROL DAMPER
GENERAL PRODUCT OVERVIE ith today s stringent design criteria for energy efficient 'green' building technology and indoor air quality, individual product engineering, testing and quality of workmanship
LINEAR BAR GRILLES T SERIES. Quality and e!ciency without compromise
LINEAR BAR GRILLES T SERIES Quality and e!ciency without compromise Weltech Business Centre - Ridgeway - Welwyn Garden City - Hertfordshire AL7 2AA Tel: 01707 871526 - Fax: 01707 871 527 - email sales@jprservices.co.uk
INDEX. Chapter1 0. air master. Round Ceiling Diffusers
air master Chapter1 0 INDEX A. Round ceiling diffusers 1. Fixed round ceiling diffuser...: ARDF...10.1 2. Round ceiling diffuser with adjustable pattern...: ARD...10.2 Standard sizes...10.3 Air pattern...10.3
Optima EXHAUST GRILL AND AIR LOUVER. Perforated Ceiling Diffusers. Features: Standard square sizes:
Perforated Ceiling Diffusers OPTIMA ceiling diffuser with perforated face, are recoended for heating, ventilating and cooling in centralized air conditioning systems. Perforated face diffusers, with 4-3-
SERIES PG. Perforated Face
SERIES PG Perforated Face PUBLICATION Diffuser DIFFUSERS 4 JULY 2015 Features - Concealed Deflection for 1, 2, 3 or 4 Way Throw. - Air Pattern Adjustable Core Option - Hinged Opening Fascia for Access
SMOKE DAMPERS SMOKE DAMPERS SMOKE DAMPERS
SMOKE DAMPERS 96 97 SD SERIES SD for Use in Dynamic Systems Types Galvanized Steel Construction as Standard.. Sleeve Type, Model: SD - 0-00. Circular Type, Model: SD - 50-00. Oval Type, Model: SD - 60-00