M1-2. Table of Contents INDUSTRIAL GRILLES. 680, 5680, 6880, 56880, 680MP, 5680MP Introduction... M1-3 Dimensional Data... M1-4
|
|
|
- Stewart Randall
- 5 years ago
- Views:
Transcription
1 1 Table of Contents & These industrial supply grilles feature adjustable, single deflection, extruded aluminum airfoil blades with a steel or extruded aluminum frame. Horizontal or vertical blades at 1 1/4, 2, or 3 spacing available. & These industrial supply grilles feature adjustable, double deflection, extruded aluminum airfoil blades with a steel or extruded aluminum frame. Horizontal or vertical front blades at 1 1/4, 2, or 3 spacing available. & These industrial supply grilles feature fully adjustable extruded aluminum front blades with pole operated rear blades, with a steel or extruded aluminum frame. Horizontal or vertical front blades at 3/4 spacing.,,,,, Introduction Dimensional Data Reference Charts... 1 erformance Data Engineering Specifications DL, DL2 Introduction & Dimensional Data attern Selection & Detail Heavy Duty Damper (odel DOBHD) Reference Charts erformance Data Engineering Specification DL This industrial supply drum louver features extruded aluminum, rear hinged vanes, aluminum frame, and up to of rotation. DL2 This industrial supply drum louver features extruded aluminum, rear hinged, split vanes, an aluminum frame, and up to of rotation Excellence in Air Distribution KRUEGER 212
2 Introduction:,, Series The / series industrial grilles feature aluminum extruded airfoil blades enhancing the look and performance of the grille. The / blade spacing ranges from 1 1/4 to 3 resulting in single section airflow ranges from 7 CF to 7,2 CF. ultisection construction allows for an unlimited airflow range. These grilles are an excellent choice for large room applications where high volumes of air are required. 1,, Series Industrial Airfoil & ultipole ODEL Single Deflection Industrial Supply Grille with Steel Frame Construction Single Deflection Industrial Supply Grille with Extruded Aluminum Frame Construction Double Deflection Industrial Supply Grille with Steel Frame Construction Double Deflection Industrial Supply Grille with Extruded Aluminum Frame Construction Industrial Supply Grille with Fully Adjustable Front Blades and ole Operated Rear Blades with Steel Frame Construction Industrial Supply Grille with Fully Adjustable Front Blades and ole Operated Rear Blades with Extruded Aluminum Frame Construction FEATURES Extruded aluminum blades. B o r d e r : 1 1/4. Blade Spacing: 1 1/4, 2, or 3 (,,, and only); 3/4 front and 1 rear ( and only). KRUEGER 212 ACCESSORY Heavy Duty Damper (odel OBDHD)* Steel Opposed Blade Damper (odel OBD)** Steel ainted Opposed Blade Damper (odel OBD)** Aluminum Opposed Blade Damper (odel OBD)** FINISHES Standard finish is #44 British White. Optional finishes available. * Accessory available with,,, Series only. ** A ccessory available with, Series only. roviding You With Air Distribution Solutions 13
3 1,,, Industrial Airfoil,,, Dimensional Data,, 1 1/4 BLADE SACING: FACE VIEW, SIDE VIEW, CROSS SECTIONS, & BLADE DETAIL INUS 1/2 (13) 1 1/4 (32) 9/1 (14)** LUS 1 3/4 (44) HORIZONTAL VIEW SHOWN WITH OBDHD 1/4 () 4 1/ (1) REF 2 13/1 (71) (**) 3/1 () DIAETER CSK SCREW HOLES HORIZONTAL LUS 1 3/4 (44) 1 1/4 (32) 1 1/4 (32) 1 / (41) VIEW BLADE DETAIL HORIZONTAL INUS 1/4 (),, 1 1/4 BLADE SACING: FACE VIEW, SIDE VIEW, CROSS SECTIONS, & BLADE DETAIL INUS 1/2 (13) HORIZONTAL VIEW SHOWN WITH OBDHD 1 1/4 (32) 9/1 (14)** NOTE: Dimensions in parentheses are mm. 1/4 () (**) 3/1 () DIAETER CSK SCREW HOLES 1/2 (14) REF 2 13/1 (71) HORIZONTAL LUS 1 3/4 (44) HORIZONTAL INUS 1/4 () LUS 1 3/4 (44) 1 1/4 (32) 1 1/4 (32) 3 (7) VIEW BLADE DETAIL KRUEGER Excellence in Air Distribution
4 1,,, Industrial Airfoil,,, Dimensional Data,, 2 BLADE SACING: FACE VIEW, SIDE VIEW, CROSS SECTIONS, & BLADE DETAIL INUS 1/4 () 2 (1) LUS 1 3/4 (44) 9/1 (14)** 1/4 () HORIZONTAL VIEW SHOWN WITH OBDHD 4 7/ (124) REF 2 13/1 (71) (**) 3/1 () DIAETER CSK SCREW HOLES HORIZONTAL LUS 1 3/4 (44) 2 (1) 1 1/4 () 2 3/ () VIEW HORIZONTAL INUS 1/4 () BLADE DETAIL,, 2 BLADE SACING: FACE VIEW, SIDE VIEW, CROSS SECTIONS, & BLADE DETAIL KRUEGER 212 INUS 1/4 () 1/4 () HORIZONTAL VIEW SHOWN WITH OBDHD 7 (17) REF 2 (1) 9/1 (14)** NOTE: Dimensions in parentheses are mm. 2 13/1 (71) (**) 3/1 () DIAETER CSK SCRE HOLES HORIZONTAL LUS 1 3/4 (44) HORIZONTAL INUS 1/4 () LUS 1 3/4 (44) 1 1/4 (32) 2 (1) BLADE DETAIL 4 1/2 (114) VIEW roviding You With Air Distribution Solutions 1
5 1,,, Industrial Airfoil,,, Dimensional Data,, 3 BLADE SACING: FACE VIEW, SIDE VIEW, CROSS SECTIONS, & BLADE DETAIL INUS 1/4 () 3 (7) LUS 1 3/4 (44) 9/1 (14)** 1/4 () (**) 3/1 DIAETER CSK SCREW HOLES HORIZONTAL VIEW SHOWN WITH OBDHD 7/ (149) REF 2 13/1 (71) HORIZONTAL LUS 1 3/4 (44) 1 1/4 (32) 3 (7) 3 3/ () VIEW NOTE: inimum size is 12 x12. HORIZONTAL INUS 1/4 () BLADE DETAIL,, 3 BLADE SACING: FACE VIEW, SIDE VIEW, CROSS SECTIONS, & BLADE DETAIL INUS 1/4 () 1/4 () HORIZONTAL VIEW SHOWN WITH OBDHD NOTE: inimum size is 12 x12. NOTE: Dimensions in parentheses are mm. 9 7/ (21) REF 3 (7) 2 13/1 (71) 9/1 (14)** (**) 3/1 () DIAETER CSK SCREW HOLES HORIZONTAL DUCT LUS 1 3/4 (44) HORIZONTAL INUS 1/4 () LUS 1 3/4 (44) 1 1/4 (32) 7 (17) VIEW 3 (7) BLADE DETAIL KRUEGER Excellence in Air Distribution
6 1,,, Industrial Airfoil,,, Reference Charts AIRFLOW VS. LEVEL:,,,, 1 1/4 BLADE SACING (NO DAER) 4 3 Neck Size Airflow (CF) Sound Level, 3" x 14" 3" x 1" 2" x 2" 3" x 12" 1" x 1" 1" x 1" 1" x 1" 27" x " 1" x " 12" x " 1" x " " x " AIRFLOW VS. LEVEL:,,,, 1 1/4 BLADE SACING (NO DAER) 1 1 Airflow (CF) Sound Level, Neck Size 4" x 4" 4" x 4" 4" x 3" 4" x 3" 42" x 3" 3" x 3" 3" x 3" 42" x 1" 3" x 1" 3" x 1" KRUEGER Excellence in Air Distribution
7 1,,, Industrial Airfoil,,, Reference Charts AIRFLOW VS. LEVEL:,,,, 2 BLADE SACING (NO DAER) 4 Airflow (CF) Sound Level, Neck Size 3" x 14" 3" x 1" 2" x 2" 3" x 12" 1" x 1" 1" x 1" 1" x 1" 27" x " 1" x " 12" x " 1" x " " x " AIRFLOW VS. LEVEL:,,,, 2 BLADE SACING (NO DAER) 1 1 KRUEGER 212 Airflow (CF) Sound Level, Neck Size 4" x 4" 4" x 4" 4" x 3" 4" x 3" 42" x 3" 3" x 3" 3" x 3" 42" x 1" 3" x 1" 3" x 1" roviding You With Air Distribution Solutions 19
8 1,,, Industrial Airfoil,,, Reference Charts AIRFLOW VS. LEVEL:,,,, 3 BLADE SACING (NO DAER) 7 7 Neck Size Airflow (CF) " x 3" 3" x 3" 2" x 3" 3" x 2" 4" x 1" 44" x 1" 32" x 1" 3" x 1" 24" x 1" 1" x 1" 12" x 1" 12" x 12" Sound Level, AIRFLOW VS. LEVEL:,,,, 3 BLADE SACING (NO DAER) 1 1 Airflow (CF) Sound Level, Neck Size 4" x 4" 47" x 47" 4" x 44" 4" x 4" 4" x 3" 4" x 3" 3" x 42" 3" x 3" 3" x 3" 3" x 34" KRUEGER Excellence in Air Distribution
9 ,,, erformance Data: Horizontal Throw 1,,, Industrial Airfoil KRUEGER 212 I DATA:,,,, 1 1/4 BLADE SACING (NO DAER) 1 3 Duct Area Vel Flow t Throw t Throw t Throw in ft² F CF "WG ft "WG ft "WG ft " x " " x " " x " " x " " x " " x " " x " " x " " x " " x " " x " NOTES: Throw values are given for terminal velocities of 1, 1, and F. Throw values are given for isothermal conditions. values are based on octave band 2 7 sound power levels minus a room absorption of 1dB, re 1 12 Watts. Dash in space denotes a or db value of less than 1. Data was obtained from tests conducted in accordance with ANSI/ASHRAE Standard 7, ISO Standard 219, and ISO Standard roviding You With Air Distribution Solutions 111
10 1,,, Industrial Airfoil,,, erformance Data: Horizontal Throw I DATA:,,,, 1 1/4 BLADE SACING (NO DAER) 1 3 Duct Area Vel Flow t Throw t Throw t Throw in ft² F CF "WG ft "WG ft "WG ft " x " " x " " x " " x " " x " " x " " x " " x " " x " " x " " x " NOTES: Throw values are given for terminal velocities of 1, 1, and F. Throw values are given for isothermal conditions. values are based on octave band 2 7 sound power levels minus a room absorption of 1dB, re 1 12 Watts. Dash in space denotes a or db value of less than 1. Data was obtained from tests conducted in accordance with ANSI/ASHRAE Standard 7, ISO Standard 219, and ISO Standard Excellence in Air Distribution KRUEGER 212
11 ,,, erformance Data: Horizontal Throw 1,,, Industrial Airfoil KRUEGER 212 I DATA:,,,, 2 BLADE SACING (NO DAER) 1 3 Duct Area Vel Flow t Throw t Throw t Throw in ft² F CF "WG ft "WG ft "WG ft " x " " x " " x " " x " " x " " x " " x " " x " " x " " x " " x " NOTES: Throw values are given for terminal velocities of 1, 1, and F. Throw values are given for isothermal conditions. values are based on octave band 2 7 sound power levels minus a room absorption of 1dB, re 1 12 Watts. Dash in space denotes a or db value of less than 1. Data was obtained from tests conducted in accordance with ANSI/ASHRAE Standard 7, ISO Standard 219, and ISO Standard roviding You With Air Distribution Solutions 113
12 1,,, Industrial Airfoil,,, erformance Data: Horizontal Throw I DATA:,,,, 2 BLADE SACING (NO DAER) 1 3 Duct Area Vel Flow t Throw t Throw t Throw in ft² F CF "WG ft "WG ft "WG ft " x " " x " " x " " x " " x " " x " " x " " x " " x " " x " " x " NOTES: Throw values are given for terminal velocities of 1, 1, and F. Throw values are given for isothermal conditions. values are based on octave band 2 7 sound power levels minus a room absorption of 1dB, re 1 12 Watts. Dash in space denotes a or db value of less than 1. Data was obtained from tests conducted in accordance with ANSI/ASHRAE Standard 7, ISO Standard 219, and ISO Standard Excellence in Air Distribution KRUEGER 212
13 ,,, erformance Data: Horizontal Throw 1,,, Industrial Airfoil KRUEGER 212 I DATA:,,,, 3 BLADE SACING (NO DAER) 1 3 Duct Area Vel Flow t Throw t Throw t Throw in ft² F CF "WG ft "WG ft "WG ft " x " " x " " x " " x " " x " " x " " x " " x " " x " " x " " x " NOTES: Throw values are given for terminal velocities of 1, 1, and F. Throw values are given for isothermal conditions. values are based on octave band 2 7 sound power levels minus a room absorption of 1dB, re 1 12 Watts. Dash in space denotes a or db value of less than 1. Data was obtained from tests conducted in accordance with ANSI/ASHRAE Standard 7, ISO Standard 219, and ISO Standard roviding You With Air Distribution Solutions 11
14 1,,, Industrial Airfoil,,, erformance Data: Horizontal Throw I DATA:,,,, 3 BLADE SACING (NO DAER) 1 3 Duct Area Vel Flow t Throw t Throw t Throw in ft² F CF "WG ft "WG ft "WG ft " x " " x " " x " " x " " x " " x " " x " " x " " x " " x " " x " NOTES: Throw values are given for terminal velocities of 1, 1, and F. Throw values are given for isothermal conditions. values are based on octave band 2 7 sound power levels minus a room absorption of 1dB, re 1 12 Watts. Dash in space denotes a or db value of less than 1. Data was obtained from tests conducted in accordance with ANSI/ASHRAE Standard 7, ISO Standard 219, and ISO Standard 11 Excellence in Air Distribution KRUEGER 212
15 ,,, erformance Data: Horizontal Throw 1,,, Industrial Airfoil KRUEGER 212 ETRIC DATA:,,,, 1 1/4 BLADE SACING (NO DAER) 1 3 Duct Area Vel Flow t Throw t Throw t Throw mm m² m/s L/s a m a m a m x x x x x x x x x x x NOTES: Throw values are given for terminal velocities of.7,., and.2 m/s. Throw values are given for isothermal conditions. values are based on octave band 2 7 sound power levels minus a room absorption of 1dB, re 1 12 Watts. Dash in space denotes a or db value of less than 1. Data was obtained from tests conducted in accordance with ANSI/ASHRAE Standard 7, ISO Standard 219, and ISO Standard roviding You With Air Distribution Solutions 117
16 1,,, Industrial Airfoil,,, erformance Data: Horizontal Throw ETRIC DATA:,,,, 1 1/4 BLADE SACING (NO DAER) 1 3 Duct Area Vel Flow t Throw t Throw t Throw mm m² m/s L/s a m a m a m x x x x x x x x x x x NOTES: Throw values are given for terminal velocities of.7,., and.2 m/s. Throw values are given for isothermal conditions. values are based on octave band 2 7 sound power levels minus a room absorption of 1dB, re 1 12 Watts. Dash in space denotes a or db value of less than 1. Data was obtained from tests conducted in accordance with ANSI/ASHRAE Standard 7, ISO Standard 219, and ISO Standard 11 Excellence in Air Distribution KRUEGER 212
17 ,,, erformance Data: Horizontal Throw 1,,, Industrial Airfoil KRUEGER 212 ETRIC DATA:,,,, 2 BLADE SACING (NO DAER) 1 3 Duct Area Vel Flow t Throw t Throw t Throw mm m² m/s L/s a m a m a m x x x x x x x x x x x NOTES: Throw values are given for terminal velocities of.7,., and.2 m/s. Throw values are given for isothermal conditions. values are based on octave band 2 7 sound power levels minus a room absorption of 1dB, re 1 12 Watts. Dash in space denotes a or db value of less than 1. Data was obtained from tests conducted in accordance with ANSI/ASHRAE Standard 7, ISO Standard 219, and ISO Standard roviding You With Air Distribution Solutions 119
18 1,,, Industrial Airfoil,,, erformance Data: Horizontal Throw ETRIC DATA:,,,, 2 BLADE SACING (NO DAER) 1 3 Duct Area Vel Flow t Throw t Throw t Throw mm m² m/s L/s a m a m a m x x x x x x x x x x x NOTES: Throw values are given for terminal velocities of.7,., and.2 m/s. Throw values are given for isothermal conditions. values are based on octave band 2 7 sound power levels minus a room absorption of 1dB, re 1 12 Watts. Dash in space denotes a or db value of less than 1. Data was obtained from tests conducted in accordance with ANSI/ASHRAE Standard 7, ISO Standard 219, and ISO Standard 12 Excellence in Air Distribution KRUEGER 212
19 ,,, erformance Data: Horizontal Throw 1,,, Industrial Airfoil KRUEGER 212 ETRIC DATA:,,,, 3 BLADE SACING (NO DAER) 1 3 Duct Area Vel Flow t Throw t Throw t Throw mm m² m/s L/s a m a m a m x x x x x x x x x x x NOTES: Throw values are given for terminal velocities of.7,., and.2 m/s. Throw values are given for isothermal conditions. values are based on octave band 2 7 sound power levels minus a room absorption of 1dB, re 1 12 Watts. Dash in space denotes a or db value of less than 1. Data was obtained from tests conducted in accordance with ANSI/ASHRAE Standard 7, ISO Standard 219, and ISO Standard roviding You With Air Distribution Solutions 121
4880 This heavy duty, double deflection, supply grille features 1/2 front and 3/4 back blade. spacing. Available in steel construction only.
I1I Table of Contents 1/51 1M/51M These supply grilles feature individually adjustable curved blades. Available in steel or aluminum construction. /5 These single deflection supply grilles feature 3/ blade
D1-2. Table of Contents MODULAR CORE DIFFUSERS. 1240, Introduction & Product Description... D1-3. Dimensional Information...
D Table of Contents, These supply, ceiling diffusers feature four handremovable modular cores. Available in steel or aluminum construction. P, P These supply, ceiling diffusers feature four handremovable
K1-2. Table of Contents LINEAR BAR GRILLES 1500, 1500MC, 1800, 1800MC
K Table of Contents, This series of extruded aluminum supply and return linear bar grilles are for ceiling, sidewall, sill (), and floor () applications. Blade thickness is 7/32., This series of extruded
ROUND DIFFUSERS G1. RM, RA Series Cone Diffusers. Introduction: RM, RA Series ROUND DIFFUSERS R M - R A S E R I E S
OUND DIFFUSES G, A Series Cone Diffusers Introduction:, A Series Krueger s /A round ceiling diffusers provide excellent performance in variable air volume systems. The round ceiling diffusers have three
6490, These perforated. ceiling returns feature a. square neck. Aluminum or steel perforated face. is available. 6600, 56600, 6600FR
C1 Table of Contents 1, 15 51, 515 supply ceiling diffusers feature a neck mounted rotatable core with either a round or square neck. Aluminum or steel perforated face is available. 2, 52 2FR, 2F supply,
J1-2. Table of Contents RETURN GRILLES
J1 RETURN GRILLE Table of Contents RETURN GRILLE / These fixedblade return grilles feature 3/4 blade spacing. Deflection will be fixed at 3 or. Available in aluminum or steel construction. / These fixedblade
6490, These perforated. ceiling returns feature a. square neck. Aluminum or steel perforated face. is available. 6600, 56600, 6600FR
C Table of Contents 6, 6 6, 6 supply ceiling diffusers feature a neck mounted rotatable core with either a round or square neck. Aluminum or steel perforated face is available. 62, 62 62FR, 629F supply,
J1-2. Table of Contents RETURN GRILLES
J1 RETURN GRILLE Table of Contents RETURN GRILLE / These fixedblade return grilles feature 3/4 blade spacing. Deflection will be fixed at 3 or. Available in aluminum or steel construction. / These fixedblade
Series DD & SD-20 Supply Grilles & Registers
Series DD & SD-20 Supply Grilles & Registers Grille - Two Sets of Louver Blades Model DDL-20 Two sets of louver blades. Front set parallel to long dimension. Rear set parallel to short dimension. All louver
LINEAR DIFFUSERS AND BAR GRILLES
49-240 48LL1 49-280 49-480 48LL2 Linear ar Grilles The Nailor 4900 Series provides an extruded aluminum bar grille that offers beautiful styling and efficient performance. Linear bar grilles offer a choice
B1-2. Table of Contents LOUVERED FACE DIFFUSERS
Table of Contents 2, FR,, M & M feature a round neck and four cones. & feature a round neck, four cones, and adjustable pattern controllers.,, M, & M feature a round neck and three cones. & feature a round
F1-2. Table of Contents PLENUM SLOT DIFFUSERS PTBS. Introduction & Dimensional Information... F1-3. Accessories... F1-54. Reference Charts...
F1 LENUM LO DIFFUE able of ontents his plenum slot supply diffuser features an adjustable blade. lots: 1 to 4 lot Widths: ¾, 1, 1½ Introduction & Dimensional Information... F13 Accessories... F15 eference
B1-2. Table of Contents LOUVERED FACE DIFFUSERS
B1 LOUEED FACE DIFFUE Table of Contents LOUEED FACE DIFFUE B12 1400, 1400F, 1400, M1400 & M1400 feature a round neck and four cones. 1400A & 1400A feature a round neck, four cones, and adjustable pattern
L1-2. Table of Contents SECURITY GRILLES 1310, 1310TF, Introduction & Dimensional Information... L1-13
L Table of Contents 0, 0TF & 50 These perforated face supply grilles feature 5/6 diameter holes on 7/6 staggered centers. This perforated face supply grille features /6 diameter holes on 9/2 staggered
CRNRR, 5CRNRR These concentric ring nozzles feature a stub duct mounting frame for smaller duct work
H1 AI NOZZLES & OUN GILLES Table of Contents AI NOZZLES & OUN GILLES PN This round punkah nozzle features a surface mounting frame. PN This round punkah nozzle features a stub duct mounting frame. PN This
DRUM LOUVERS DRUM LOUVERS 45DL SERIES. Models: 45DL1 Single Vanes 45DL2 Split Vanes G151 HIGH CAPACITY LONG THROW ALUMINUM CONSTRUCTION
DRUM LOUVERS 45DL SERIES HIH CAPACITY LON THROW ALUMINUM CONSTRUCTION Models: Single Vanes 45DL2 Split Vanes Suffix '-O' adds a steel opposed blade damper Models -O and 45DL2 Model Series 45DL Drum Louvers
B1-2. Table of Contents LOUVERED FACE DIFFUSERS
1 LOUVERED FACE DIFFUER Table of Contents LOUVERED FACE DIFFUER 12 1400, 1400FR, 1400, M1400 & M1400 These supply diffusers feature a round neck and four cones. 1400A & 1400A These supply diffusers feature
LOUVERED FACE GRILLES AND REGISTERS
Performance Notes for Supply rilles and Registers, 6 and 67 Series Throw, Spread and Drop The isovel diagrams shown below, illustrate in plan view, the relationship of horizontal spread to throw for three
SUPPLY ROUND DIFFUSERS TABLE OF CONTENTS ROUND DIFFUSERS. M-2 Excellence in Air Distribution MODELS RM1/5RM1/RM2/5RM2/RM4/5RM4/RA2/RA4
SUPPLY OUN IFFUSES TBLE OF CONTENTS OUN IFFUSES 1/51 These supply ceiling diffusers discharge horizontally only. They feature three cones with two position settings to control room air induction. 2/52/2
A1-2. Table of Contents ARCHITECTURAL & PLAQUE DIFFUSERS
A1 Table of Contents PRIM features an arcuate faceplate. Center square appliqué offers nine standard colors to match interior décor. PLQ & 5PLQ features a square plaque faceplate. PLQR features a round
SECURITY PRODUCTS GENERAL PRODUCT OVERVIEW. Security Products
GENERAL PRODUCT OVERVIEW Security Products Nailor offers a complete line of Security Grilles, Registers and Diffusers. The product line includes grilles and registers for maximum, medium and minimum security
GRILLES AND REGISTERS
RILLES AND REISTERS Models 45DL1, 45DL2 Models 813SH-O, 813DV Drum Louvers These extruded aluminum drum louvers are appropriate when high volumes of air are used and in spot heating and cooling applications.
Product Nomenclature G-X-AB-Z 0 = Zero Degree, 1 = 15 Degree, 2 = 15 Degree (2-way)
Fixed Bar Grills - Series G Description Caryaire Fixed Bar Grills are ideal for Supply as well as Return air, in both Cooling as well as Heating. It can be used in high side wall or ceiling applications.
SECURITY PRODUCTS GENERAL PRODUCT OVERVIEW. Security Products
GENERAL PRODUCT OVERVIEW Security Products Nailor offers a complete line of Security Grilles, Registers and Diffusers. The product line includes grilles and registers for maximum, medium and minimum security
D3-2. Table of Contents DISPLACEMENT VENTILATION
D3 Table of Contents This rectangular unit is ideal for wall or ceiling installations. B The U-shaped 180 discharge pattern and high capacity is ideal for retail spaces, commercial, or lobbies. ENGINEERING
CONCENTRIC Product Information & Applications
CONCENTRIC Product Information & pplications Concentrics s the leading manufacturer of Concentric Diffusers for the past 30 years, Ruskin Rooftop Systems offers a cost effective way of distributing air
Wall and Ceiling Grille
September 14 Wall and Ceiling Grille Models SD, DD, EC, PG, G45, NVG, NB, GN, WB and GW Single and Double Deflection Fixed and Removable Core Eggcrate Perforated Grille 45 Fixed Blade Non Vision Bar Grilles
ISSUE B, OCT Architectural Square Ceiling Diffusers. UNI & AUNI Diffusers. Advanced Air
ISSUE B, OCT 2009 Architectural Square Ceiling Diffusers UNI & AUNI Diffusers Product Overview - Uni Series Architectural Ceiling Diffusers Uni Series High Performance Square Face Round Neck The Model
Square/Rect. and Square Louvered Face and Plaque Face Diffuser
/Rect. and Louvered Face and Plaque Face Diffuser Series J: Easily Adjustable from Horizontal to Vertical Vertical Discharge Application: Carnes steel (SK) and aluminum (SE) louvered face diffusers are
Application Guidelines
Grilles and Registers Application Guidelines Introduction Overview It is the intent of this section to give some basic application guidelines for the use of supply and return grilles and registers in a
RPD ROUND PLAQUE DIFFUSER
ROUND PLAQUE DIFFUSER s (RPD) provide a balance between engineering and architectural needs, with a flush appearance and superior VAV performance in both ceiling and exposed duct mounting applications.
LINEAR DIFFUSERS AND BAR GRILLES
LINEAR DIFFUSERS AND AR GRILLES LINEAR DIFFUSERS AND AR GRILLES LINEAR SLOT DIFFUSER PLENUMS FOR TECHZONE TYPE CEILINGS Model Series 5300TZ Plenums are designed to fit the 5000TZ Series Slot Diffusers.
fsfdfsdfsdfssfsf OMNI DIFFUSER
fsfdfsdfsdfssfsf OMNI DIFFUSER Architectural Ceiling Diffusers diffusers OMNI The Titus OMNI diffuser satisfies architectural as well as engineering criteria. Its strong, clean, unobtrusive lines harmonize
EGG CRATE RETURN GRILLE
80 EGG CRATE RETURN GRILLE 80 The 80 Series is available in various mounting styles and features sturdy construction, consisting of a heavy gauge aluminum grid core, optional extruded aluminum borders
MODULAR CORE CEILING DIFFUSERS
MOEL SQUARE 12345-10 MOULAR CORE SQUARE IFFUSERS ROUN NECK SQUARE 1, 2, 3 OR ROUN 4-WAY AJUSTABLE NECK SQUARE ISCHARGE ROUN PATTERN NECK Steel Model: 7500 Suffix '-O' adds a steel opposed blade damper
GRILLES AND REGISTERS
HEAVY DUY SAINLESS SEEL his grille is used mainly for return air applications that require strength and durability in corrosive or high humidity environments. he frame is welded and the blades are spaced
SECURITY PRODUCTS GENERAL PRODUCT OVERVIEW. Security Products
GENERAL PRODUCT OVERVIEW Security Products Nailor offers a complete line of Security Grilles, Registers and Diffusers. The product line includes grilles and registers for maximum, medium and minimum security
GRD PRODUCT CATALOG DISPLACEMENT VENTILATION PRODUCTS
GRD PRODUCT CATALOG PRODUCTS 2018 Metal Industries, Inc. PRODUCTS Displacement Ventilation systems provide conditioned air at floor level at very low velocity and allow heat sources within the room (like
SINGLE DUCT AIR TERMINAL UNITS
SINGLE DUCT AIR terminal units SINGLE DUCT AIR TERMINAL UNITS MODEL NUMBER LEGEND XXXXX XXX -XXXX Model TH TL THECO Inlet Size (04, 05, 06, etc.) Generation 5, 6, 7 The METALAIRE single duct terminal units
GRILLES AND REGISTERS
RILLES AND REISERS HEAVY DUY SAINLESS SEEL his grille is used mainly for return air applications that require strength and durability in corrosive or high humidity environments. he frame is welded and
INDEX. Chapter1 1. A. Jet diffusers 1. Jet diffuser...: AJD-P
Chapter1 1 INDEX A. s 1....: AJD-P...11.1 Standard sizes...11.1 Fixing details...11.2 Panel arrangement...11.2 How to order...11.2 B. Air flow data 1. at o o position...: Tab: 11.1 (A)...11.3 2. at o position...:
DRUM JET DIFFUSERS. Available in Aluminium & Stainless Steel
DRUM JET DIFFUSERS Available in Aluminium & Stainless Steel Introduction The JPR range of Drum Jet diffusers are high air capacity terminals designed for applications requiring a long jet throw. They are
Premium Correctional Air Distribution. The First Name in Air Diffusion.
Premium Correctional Air Distribution The First Name in Air Diffusion www.anemostat.com PRODUCT DIRECTORY APPLICATIONS Stainless Steel S-Vent MAXIMUM SECURITY GRILLES NEW CONSTRUCTION page 16 page 4 &
for Pleasant & Healthy Air-Distribution ISO 9001:2000 Linear Bar & Floor Grilles Product Bulletin 135-D
for Pleasant & Healthy Air-Distribution ISO 90012000 Product Bulletin 135-D Linear Bar & Floor Grilles Pleasant.. Serene.. YOU & DASCO... Since 1964 Partners for good health INTRODUCTION DASCO Linear Bar
PERFORATED CEILING DIFFUSERS
PERFORAE MOEL PERFORAE 12345-10 CEILING SQUARE IFFUSERS ROUN NECK SQUARE ROUN NECK SUPPLY SQUARE 1, 2, 3 OR ROUN 4-WAY AJUSABLE NECK ISCHARGE PAERN Steel Models: 4320 Flush Face 4325 rop Face Aluminum
FAN POWERED TERMINAL UNITS
Benefits: Fan powered terminals are typically used for heating and cooling of perimeter zones. Operating cost savings can be achieved through the use of waste heat recovery from the ceiling plenum and
LINEAR SLOT DIFFUSERS PLENUMS
LINEAR SLOT DIFFUSER PLENUMS ADAPTORS FOR MODEL SERIES 5000 LINEAR SLOT CEILING DIFFUSERS Standard Models: 5350(I) 1/2" (13) Slot 5375(I) 3/4" (19) Slot 5310(I) 1" (25) Slot Modified Performance Models:
Application Guidelines
Grilles and Registers Application Guidelines Introduction Overview It is the intent of this section to give some basic application guidelines for the use of supply and return grilles and registers in a
JVR CONTENTS. Page Introduction 2 Models and dimensions 3 Technical data. Selection tables 4 Technical data. Selection charts 5 Product codes 6
1 CONTENTS Page Introduction 2 Models and dimensions 3 Technical data. Selection tables 4 Technical data. Selection charts 5 Product codes 6 2 VAV regulator, model Description The variable air volume regulators
Cell Ventilation Security Grille
June 2010 Cell Ventilation Security Grille Cell Ventilation Security Grille Model CV Features Stainless Steel Construction Galvanised Steel/ PPC Construction Supply and Exhaust Tested "Fit For Purpose"
Extruded Aluminum Construction 1/4 Bars on 1/2 Centers Floor, Sidewall or Ceiling Mount Pencil Proof
OVERVIEW Linear Bar, Grilles and Registers OVERVIEW LINEAR BAR, GRILLES and REGISTERS Curtainaire Trimaire Varicore Extruded Aluminum Construction 1/4 Bars on 1/2 Centers Floor, Sidewall or Ceiling Mount
DRUM JET DIFFUSERS TYPE: DJA DJB DJAP DJBP
TYPE: DJA DJB DJAP DJBP APPLICATION Type DJ As with type AJ diffusers, this product is also designed to project large volumes of air over long distances, but particularly lends itself to sidewall or ductmounting,
fan powered terminals
PTFS-F, ATFS-F, DTFS-F / AIRFLOW VS. DOWSTREAM STATIC PRESSURE TFS-F Size B 650 600 550 450 350 250 200 1 1200 1100 600 TFS-F Size C 150 TFS-F Size D 2 TFS-F Size E 1 2600 1 1 1600 1 1 1 1200 1100 2 2
BP - Floor grilles E-04/07
BP - Floor grilles 1-8.0-01.00-E-04/07 Floor grilles BP BP Floor grilles Versions - BP5 (deflection 0 ) - BP3 (deflection 15 ) - BP-RG (adjustable millimetrically) - BP-CTX (with counterframe) The supply
FAN POWERED SERIES FCI-600 CONSTANT VOLUME FAN TERMINAL UNIT SPECIFIABLE FEATURES
FAN TERMINAL UNIT SPECIFIABLE FEATURES Galvanized steel casing, mechanically sealed for low leakage construction NEMA TYPE 1 rated hinged control enclosure with standoff to prevent penetration of casing
FAN POWERED TERMINAL UNITS
Benefits: Fan powered terminals are typically used for heating and cooling of perimeter zones. Operating cost savings can be achieved through the use of waste heat recovery from the ceiling plenum and
GDD - Supply Grille. Halton GDD. Supply Grille
Halton GDD Supply Grille Horizontal supply, for circular duct installations For cooling and heating applications; suitable also for exhaust Adjustable vertical front vanes, adjustable horizontal rear vanes
PERFORATED CEILING DIFFUSERS
PERFORAE PERFORAE CURVE MOEL BLAE 12345-10 IFFUSERS SQUARE ROUN NECK SQUARE SUPPLYROUN NECK 4-WAY AJUSABLE ISCHARGE SQUARE ROUN NECK PAERN (SANAR) 1, 2 OR 3-WAY ISCHARGE PAERN (OPIONAL) Steel Models: 4320CB
Incorporating V2.0. Product spec >>> > Series DJ - Drum jet diffusers
Incorporating V2.0 Product spec >>> > Series DJ - Drum jet diffusers Diffusers Drum jets (Premium) Recommended for: Wall, ceiling & duct Supply Overview Exceptional throw Throw completely adjustable Drum
GRILLES AND REGISTERS
Airfoil Blade Return Air Models 71FH, 7145H 45 Deflection, 3/4" (19) Blade Spacing The airfoil blades are fixed at a 45 angle. This grille is vision proof when installed in a low or high sidewall location
INDEX. Chapter3. air master. Linear Bar Grilles
Chapter3 INDEX A Linear bar grilles: 1. Supply linear bar grille...: ASLG...3.1 2. Supply linear bar register...: ASLR...3.2 3. Return linear bar grille...: ARLG...3.3 4. Return linear bar register...:
Optima EXHAUST GRILL AND AIR LOUVER. Perforated Ceiling Diffusers. Features: Standard square sizes:
Perforated Ceiling Diffusers OPTIMA ceiling diffuser with perforated face, are recoended for heating, ventilating and cooling in centralized air conditioning systems. Perforated face diffusers, with 4-3-
EXTRUDED ALUMINUM LINEAR BAR GRILLES AND REGISTERS
SAUDI AIR CONTROL SYSTEM INDUSTRIAL REGISTRATION NO.353 EXTRUDED ALUMINUM LINEAR BAR GRILLES AND REGISTERS EXTRUDED ALUMINUM LINEAR BAR GRILLES AND REGISTERS SERIES GLG and GLR 1, 2, 3, 4/5,6,7,8,9,10.
SINGLE DUCT AIR TERMINAL UNITS
AIR terminal units AIR TERMINAL UNITS MODEL NUMBER LEGEND XXXXX XXX -XXXX Model TH TL THECO Inlet Size (04, 05, 06, etc.) Generation 5, 6, 7 The METALAIRE single duct terminal units are at the core of
FALCON Ceiling. Circular ceiling air diffuser for supply air QUICK FACTS
Circular ceiling air diffuser for supply air QUICK FACTS Manages large supply airflows Horizontal or vertical distribution pattern Provision for motorised adjustment of the distribution pattern Suitable
SPD SQUARE PLAQUE DIFFUSER
SQUARE PLAQUE DIFFUSER The (SPD) has a flush appearance, making it ideal for architecturally-conscience commercial spaces, and provides industry-leading low pressure drop and sound generation with a 360
FlowBar High Capacity Slot Diffuser
October 2016 FlowBar High Capacity Diffuser Model HT (High Throw) Model JT (Jet Throw) Features HT & JT 25mm, 38mm, 51mm, 63mm & 76mm s Ceiling or Sidewall Applications Modular or Continuous s Curved Sections
LAMINAR FLOW DIFFUSER Model DLAB
Laminar & Radial Flow Diffuser LAMINAR FLOW DIFFUSER Model DLAB Application Laminar Flow diffusers are used to deliver air to surface directly underneath in a non-aspirating air pattern, with the minimum
CEILING DIFFUSERS. Supply Air
Perforated Ceiling iffusers Nailor manufactures a full range of supply air and matching return air Perforated Ceiling iffusers. he perforated face is available in both corrosion-resistant steel and aluminum,
VAV TERMINAL UNIT KYODO-ALLIED TECHNOLOGY PTE LTD
VAV TERMINAL UNIT KYODO-ALLIED TECHNOLOGY PTE LTD R CONTENTS MODEL: KYODO / KYODO-R... 1 INTRODUCTION... 1 APPLICATION... 1 VARIABLE AIR VOLUME SYSTEM... 1 FEATURES... 2 MATERIALS... 3 AIR VOLUME CONTROL
Anti-Ligature Grille. There s a much bigger picture to be found at Ruskin Air Management. Model AL/35 Model AL/24. range available.
June 2013 Anti-Ligature Grille Model AL/35 Model AL/24 l Cost effective l Robust construction l Supply and exhaust l Complete plenum box range available l Full range of accessories available There s a
OVERVIEW Combination Supply/Return Diffuser (SARM)
OVERVIEW Combination Supply/Return Diffuser (SARM) APPLICATION INFORMATION The extruded aluminum square and rectangular supply and return diffusers are designed principally for packaged roof top type heating
Incorporating V2.0. Product spec >>> > Series DD - Double deflection grilles
Incorporating V2.0 Product spec >>> > Series DD - Double deflection grilles Grilles Double deflection Recommended for: Wall, ceiling & duct Supply & extract Overview Enhanced functionality As per the name,
INDEX. Chapter2. air master. Grilles and Registers
Chapter2 INDEX A.Grilles and registers. 1. Supply air grille - front horizontal blades...: ASG-H...2.1 2. Supply air grille - front vertical blades...: ASG-V...2.2 3. Supply air register - front horizontal
GRILLES AND REGISTERS
RILLES AND REISERS CURVED SPIRAL DUC RILLES Nailor s unique curved spiral duct grille design offers an architecturally superior appearance and saves installation time and money by directly mounting to
WE GUIDE AIR LOUVERS
WE GUIDE AIR LOUVERS index >> SAND TRAP LOUVERS - STL / STLC 01-02 >> 2 INCH EXHAUST AIR LOUVERS - EAL - 2 03 >> 4 INCH EXHAUST AIR LOUVERS - EAL - 4 04 >> GRAVITY AIR LOUVERS - GAL 05 >> FRESH AIR LOUVERS
Aircell Polymer Range
Aircell Polymer Range S, D Aircell Adjustable Blade Grilles G, A Aircell Polymer Ehaust Grilles T Aircell Polymer Air Transfer Grilles E Aircell Polymer Eggcrate Grilles Aircell - S Aircell - D Aircell
HCD-230 Industrial Control Damper
Application and Design Model is a heavy duty industrial control damper with a flanged frame. It is designed to control airflow and provide shut off in HVAC or industrial process control systems. A variety
CEILING DIFFUSERS CEILING DIFFUSERS
Model 4340M Model 4330CB Premium, Curved Blade Pattern Controllers The perforated diffusers in this series have an extruded aluminum frame with a narrow border that is visible within the T-Bar module.
D2-2. Table of Contents RETROFIT/BYPASS TERMINAL UNITS
D2 RETROFIT/YPASS TERMINA UNITS Table of Contents RETROFIT/YPASS TERMINA UNITS RVE This retrofit terminal unit is designed to convert high pressure mechanical constant volume systems to low pressure variable
Multicore diffusers. introduction. type control. options. finish. sizes SQUARE AND RECTANGULAR DIFFUSERS
SQUARE AND RECTANGULAR DIFFUSERS introduction The IC diffuser is a versatile form of air terminal offering the facility of multi directional throw patterns in a wide range of frame sizes. Each core style
High Performance Fan Coils FCHG Genesis Series Horizontal
Dimensional Data 5 7 /8 (150) D 14 (356) 2 (51) Diverter - Slides Into Discharge Ductwork Optional: Second Drain Pan Connection E Coil Section X Dimensional Data - IP (in.) / SI [mm] Unit Fan Outlet Duct
CEILING DIFFUSERS CEILING DIFFUSERS
CEILING IFFUSERS "TWISTER" HIGH INUCTION STAMPE FACE The "Twister" diffuser is engineered to optimize air distribution effectiveness. This next generation diffuser has a high induction, 360 swirl pattern
RETROFIT TERMINAL UNITS
GENERAL PROUCT OVERVIEW Retrofit Terminal s Convert Constant Air Volume Systems to Variable Air Volume. Convert Constant Volume ual uct Systems to Variable Air Volume. Convert Multizone Systems to Variable
Catalog Air Terminal Units. Models MQTH, MQFCI and MQFVI. Model MQTH. Model MQFCI. Model MQFVI
Air Terminal Units Models MQTH, MQFCI and MQFVI Catalog 903-1 Model MQTH Model MQFCI Model MQFVI Table of Contents Single Duct Air Terminal Units.... 3 Introduction....3 MQTH-500 Single Duct Air Terminal
ATU PRODUCT CATALOG AIR TERMINAL UNITS FCI-600 CONSTANT VOLUME FAN TERMINAL UNIT Metal Industries, Inc.
ATU PRODUCT CATALOG AIR TERMINAL UNITS FCI-600 CONSTANT VOLUME FAN TERMINAL UNIT 15 Metal Industries, Inc. BENEFITS: Fan powered terminals are typically used for heating and cooling of perimeter zones.
Linear Slot Diffusers Model Slot 20 & Model Slot 25
Model Slot & Model Slot 25 Contents Introduction!!!!!! Page 3 Di"user Specification!!!! Page 4 Air Patterns!!!!!! Page 5 Flange Styles!!!!!! Page 6 Corner Sections!!!!! Page 7 Selection Procedure!!!! Page
PELICANTM. Wall. Rectangular perforated wall air diffusers for supply air. Quick guide
PELICANTM Wall Rectangular perforated wall air diffusers for supply air Quick facts Flexible air distribution pattern, easy to set Cleanable, removable damper Simple commissioning, fixed measurement tapping
Insulated Control Damper. 1/2 in. (13mm) 1/2 in. (13mm) 12 x 12 (305 x 305) 8 x 12 (203 x in. W x 120 in. H (3658mm x 3048mm) 5 in.
R Application and Design The is a low leakage thermally insulated damper with extruded airfoil blades. features thermally broken frame and blade to eliminate the transfer of heat or cold penetration and
EAGLE Wall. Wall air diffusers with discs for supply air and flush mounting QUICK FACTS
Wall air diffusers with discs for supply air and flush mounting QUICK FACTS Rotatable discs % flexible distribution pattern Cleanable Adjustable slot for enhanced capacity Simple adjustment Used together
SUPPLY AND RETURN AIR GRILLES TYPE: AS/GS120 AS/GS130
SUPPLY AND RETURN AIR GRILLES TYPE: AS/GS120 AS/GS130 Installation dimensions AS/GS120 AS/GS130 Application The grille type AS / GS is used for the supply and exhaust of cooled or heated air in facilities
Wall air diffusers with discs for supply air and flush mounting. Quick guide COLIBRI WALL
Wall air diffusers with discs for supply air and flush mounting General Rectangular supply air diffusers with rotatable discs. The disc technique enables supply of air above or below room temperature as
SECURITY PRODUCTS SECURITY PRODUCTS
GRILLES & REGISTERS These louvered blade grilles and registers are paired up with a lattice face plate to meet minimum security requirements. They are available for both supply and return air applications
GRILLES AND REGISTERS
AIRFOIL BLADE RETURN AIR 45 DEFLECTION, 3/4 () BLADE SPACIN The airfoil blades are fixed at a 45 angle. This grille is vision proof when installed in a low or high sidewall location with grille blade deflection
SERIES GF. Heavy Duty Floor Grilles
SERIES GF Heavy Duty Floor Grilles PUBLICATION GRILLES 15 MARCH 2015 Features - Numerous Frame Formats to Suit Floor Types of all Manufacturers - Robust Design. - Strong and Rigid Assembly. - Fully Tested
Series HCD Airfoil Control Damper
Series HCD Airfoil Control Damper Model: HCD-1 The Holyoake HCD-1 is a precisely made volume and pressure control device with extremely low leakage when closed, (in the range of 0.003m 3 /s at 100 Pa).
Insulated Control Damper. 12 x 7 (305 x 178) 8 x 7 (203 x 178)
R Application and Design The is a low leakage thermally insulated damper with extruded airfoil blades. features thermally broken blade to eliminate the transfer of heat or cold penetration and reduced
Catalogue. FlowBar. High Capacity Slot Diffuser.
Catalogue FlowBar High Capacity Slot Diffuser www.air-diffusion.co.uk sales@air-diffusion.co.uk Content Introduction... 4 Diffuser Specification... 5 Air Patterns... 6 Flange Styles... 7 Curved Sections...
GRILLES AND REGISTERS
HEAVY DUTY STAINLESS STEEL This grille is used mainly for return air applications that require strength and durability in corrosive or high humidity environments. The frame is welded and the blades are
500-YCI SERIES FAN-POWERED AIR TERMINAL UNIT FORM EG2 (404)
500-YCI SERIES FAN-POWERED AIR TERMINAL UNIT Table of Contents General Information...3 500-YCI Features...4-5 Dimensional Data...6-7 ARI Rating Points...8 Statement of Standard Test Conformity...8 Motor