4880 This heavy duty, double deflection, supply grille features 1/2 front and 3/4 back blade. spacing. Available in steel construction only.
|
|
|
- Lesley McDonald
- 5 years ago
- Views:
Transcription
1 I1I Table of Contents 1/51 1M/51M These supply grilles feature individually adjustable curved blades. Available in steel or aluminum construction. /5 These single deflection supply grilles feature 3/ blade spacing. Available in steel or aluminum construction. 55 This single deflection supply grille features 1/2 blade spacing. Available in aluminum construction only. /5 These double deflection supply grilles feature 3/ blade spacing. Available in steel or aluminum construction. 55 This double deflection supply grille features 1/2 blade spacing. Available in aluminum construction only. This heavy duty, double deflection, supply grille features 1/2 front and 3/ back blade spacing. Available in steel construction only. /5 These single deflection, steel supply registers feature a gangoperated rear louver and 3/ blade spacing. Available in steel or aluminum construction. AF/AF5 These single deflection, supply grilles feature airfoil blades at 3/ spacing. Blades are aluminum construction only with steel or aluminum frame. AF/AF5 These double deflection, supply grilles feature airfoil blades at 3/ spacing. Blades are aluminum construction only with steel or aluminum frame. 1, 51, 1M, 51M Introduction & Blade Spacing...I13 Dimensional Information...I1 Reference Charts...I15 Performance Data...I16 Engineering Specification...I12, 5,, 5, 55, 55,,,, 5 Introduction...I125 Dimensional Information...I126 Frame Styles...I129 Reference Charts...I13 Performance Data...I132 Engineering Specification...I1 AF, AF5, AF, AF5 Introduction...I17 Dimensional Information...I1 Reference Charts...I19 Performance Data...I151 Engineering Specification...I Introduction & Dimensional Information...I16 Reference Charts...I165 Performance Data...I167 Engineering Specification...I175 This heavy duty, single deflection, supply grille features 1/2 blade spacing. Available in steel construction only. 515 This fixedblade supply grille features a removable, reversible core. Deflection may be set at 5 or 15 up/down. Available in aluminum construction only. I12 Excellence in Air Distribution KRUEGER 212
2 I1I,,, Series Supply Introduction:,,, Series Krueger offers a wide variety of supply grilles to meet the needs of today s grille applications. The most common single and double deflection Krueger grilles are the /5 and /5 series. Both series offer 3/ blade spacing and a 1 1/ flange. If 1/2 blade spacing is required, the 55 single deflection or 55 double deflection grille is available. Gymnasium applications require grilles that resist accidental abuse from gymnasium equipment, including basketballs and dodge balls impacting the surface of the grilles. Krueger offers the heavy duty single or double deflection gym supply grille series for this type of application; the 1 gage blades can stand up to the accidental collision of most gymnasium equipment. KRUEGER 212 Apartment applications have occupants with varying air distribution needs. The occupant has the ability to easily adjust the throw direction of a register. Krueger s /5 multilouver register is an ideal choice. The multilouver gang operates a set of rear deflectors allowing for easy adjustments of throw direction and volume. MODELS Single Deflection Steel Supply Grille, 3/ Blade Spacing 5 Single Deflection Aluminum Supply Grille, 3/ Blade Spacing Double Deflection Steel Supply Grille, 3/ Blade Spacing 5 Double Deflection Aluminum Supply Grille, 3/ Blade Spacing 55 Single Deflection Aluminum Supply Grille, 1/2 Blade Spacing 55 Double Deflection Aluminum Supply Grille, 1/2 Blade Spacing Heavy Duty, Single Deflection Steel, Supply Grille, 1/2 Blade Spacing Heavy Duty, Double Deflection Steel, Supply Grille, 1/2 Blade Spacing Front Blades, 3/ Blade Spacing Rear Blades Single Deflection Steel Supply Register with Gang Operated Rear Louver, 3/ Blade Spacing 5 Single Deflection Aluminum Supply Register with Gang Operated Rear Louver, 3/ Blade Spacing FEATURES Horizontal (H) or vertical (V) front blades. Fully adjustable blades. ACCESSORIES Steel Opposed Blade Damper (Model OBD) Steel Painted Opposed Blade Damper (Model POBD) Aluminum Opposed Blade Damper (Model 5OBD) Square to Round Adapter (Model SRAC325) Plaster Frame (Model PF & 5PF) FINISHES Standard finish is # British White. Optional finishes available Heavy Duty Heavy Duty Providing You With Air Distribution Solutions I125
3 I1I,,, Series Supply, 5,, 5 Dimensional Information, 5, FACE VIEW, SIDE VIEW, & CROSS SECTION 1 1/" (32) 9/16" (1) PLUS 1 3/" (5) MINUS 3/" (19) HORIZONTAL BLADE PATTERN 2 3/" (7) HORIZONTAL PLUS 1 3/" (5) HORIZONTAL MINUS 1/" (6) 3/" (19) SHOWN WITH CLOSED OBD BLADE PATTERN, 5, FACE VIEW, SIDE VIEW, & CROSS SECTION 1 3/" (5) 9/16" (1) PLUS 1 3/" (5) MINUS 3/" (19) HORIZONTAL BLADE PATTERN 3 1/" (3) NOTE: Dimensions in parentheses are mm. HORIZONTAL PLUS 1 3/" (5) HORIZONTAL MINUS 1/" (6) 3/" (19) SHOWN WITH CLOSED OBD BLADE PATTERN KRUEGER 212 I126 Excellence in Air Distribution
4 I1I,,, Series Supply 55, 55 Dimensional Information 55, FACE VIEW, SIDE VIEW, & CROSS SECTION 1 1/" (32) 9/16" (1) PLUS 1 3/" (5) MINUS 3/" (19) HORIZONTAL BLADE PATTERN 2 3/" (7) HORIZONTAL PLUS 1 3/" (5) HORIZONTAL MINUS 1/" (6) 1/2" (13) SHOWN WITH CLOSED OBD BLADE PATTERN 55, FACE VIEW, SIDE VIEW, & CROSS SECTION 1 3/" (5) 9/16" (1) PLUS 1 3/" (5) MINUS 3/" (19) KRUEGER 212 HORIZONTAL BLADE PATTERN 3 1/" (3) NOTE: Dimensions in parentheses are mm. HORIZONTAL PLUS 1 3/" (5) HORIZONTAL MINUS 1/" (6) 1/2" (13) SHOWN WITH CLOSED OBD BLADE PATTERN Providing You With Air Distribution Solutions I127
5 I1I,,, Series Supply, Dimensional Information, FACE VIEW, SIDE VIEW, & CROSS SECTION HORIZONTAL MINUS 5/" (16) NOMINAL MINUS 1/" (6) TYP 1/2" (13) TYP SHOWN WITH OBD CLOSED PLUS 1 3/" (5) MINUS 5/" (16) 2 3/" (7) TYP 1/" (6) TYP HORIZONTAL BLADE PATTERN PLUS 1 3/" (5) BLADE SUPPORT MULLION TYP " (23) MAXIMUM SPACING 1 1/" (32) º º PATTERN DEFLECTION DETAIL BLADE PATTERN 1 1/2" (3), FACE VIEW, SIDE VIEW, & CROSS SECTION HORIZONTAL MINUS 5/" (16) SHOWN WITH CLOSED OBD NOMINAL MINUS 1/" (7) SUPPORT MULLION " (23) MAX SPACING TYP 2 3/" (7) 1/2" (13) TYP HORIZONTAL BLADE PATTERN BLADE PATTERN NOTE: Dimensions in parentheses are mm. 1/" (6) PLUS 1 3/" (5) 1 1/2" (3) PLUS 1 3/" (5) MINUS 5/" (16) 3/" (19) TYP º º PATTERN DEFLECTION DETAIL KRUEGER 212 I12 Excellence in Air Distribution
6 I1I,,, Series Supply, 5 Dimensional Information, 5, FACE VIEW, SIDE VIEW, & CROSS SECTION 1" (25) 9/16" (1) PLUS 1 3/" (5) MINUS 1/" (6) 1 5/" (1) MULTI LOUVER CLOSED HORIZONTAL PLUS 1 3/" (5) 3/" (19) 1 1/" (32) MULTI LOUVER OPEN,, Series Frame Styles & Concealed Mounting, 5,, 5, 55, 55,,,, 5, FRAME STYLES, 5,, 5, 55, 55,,, COEALED MOUNTING KRUEGER 212 PLUS 1 3/" (5) 1 1/" (32) 1 1/" (32) 1/" (6) 1 1/" (32) PANEL MINUS 1/" (6) FRAME 22 FRAME 23 1/" (6) NOTES: Dimensions in parentheses are mm. Frame 23 is not available with the / series. INSIDE OF GRILLE # SCREW 3/" x 1 1/" (19 x 32) ANGLE BY KRUEGER GRILLE FRAME BY OTHERS SHEETROCK EXISTING NOTES: Concealed mounting is not available with an OBD or with the /5 series. Maximum unit size is 36 x2. Providing You With Air Distribution Solutions I129
7 I1I,,, Series Supply,, Series Reference Charts AIRFLOW VS. :, 5,, 5, 55, 55,,,, 5 (WITH OBD/MULTILOUVER) Airflow (CFM) Sound Level, Neck Size 2" x 1" 22" x 1" 1" x 1" 1" x 1" 22" x 6" 1" x 6" 1" x 6" 1" x 6" 6" x 6" I13 AIRFLOW VS. :, 5,, 5, 55, 55,,,, 5 (WITH OBD/MULTILOUVER) Airflow (CFM) Sound Level, NOTES: Charts are at 2 BTUH/ft 2 loads. See the Engineering section of this catalog for instructions on how to read these charts and additional ADPI information. Excellence in Air Distribution Neck Size 2" x 1" 3" x 2" 36" x 16" 3" x 1" 36" x 1" 3" x 16" 2" x 16" 1" x 1" 16" x 16" KRUEGER 212
8 I1I,,, Series Supply,, Series Reference Charts AIRFLOW VS. :, 5,, 5, 55, 55,,,, 5 (WITH OBD/MULTILOUVER) Airflow (CFM) Sound Level, Neck Size " x " 6" x 3" 3" x 3" 2" x 3" 3" x 3" 36" x 3" 36" x 2" 3" x 3" 3" x 2" KRUEGER 212 AIRFLOW VS. :, 5,, 5, 55, 55,,,, 5 (WITH OBD/MULTILOUVER) Airflow (CFM) Sound Level, NOTES: Charts are at 2 BTUH/ft 2 loads. See the Engineering section of this catalog for instructions on how to read these charts and additional ADPI information. Neck Size " x " " x 6" 6" x 6" " x 2" " x " 2" x 2" " x 36" Providing You With Air Distribution Solutions I131
9 I1I I132,,, Series Supply,, Series Performance Data: Horizontal Throw IP DATA:, 5,, 5, 55, 55,,,, 5 (WITH OBD/MULTILOUVER) in ft² FPM CFM "WG ft "WG ft "WG ft " x " " x " " x " " x " " x " " x " " x " " x " " x " " x " " x " NOTE: See notes on page I Excellence in Air Distribution KRUEGER 212
10 I1I,,, Series Supply,, Series Performance Data: Horizontal Throw KRUEGER 212 IP DATA:, 5,, 5, 55, 55,,,, 5 (WITH OBD/MULTILOUVER) in ft² FPM CFM "WG ft "WG ft "WG ft " x " " x " " x " " x " " x " " x " " x " " x " " x " " x " " x " NOTE: See notes on page I137. Providing You With Air Distribution Solutions I133
11 I1I I13,,, Series Supply,, Series Performance Data: Horizontal Throw IP DATA:, 5,, 5, 55, 55,,,, 5 (WITH OBD/MULTILOUVER) in ft² FPM CFM "WG ft "WG ft "WG ft " x " " x " " x " " x " " x " " x " " x " " x " " x " " x " " x " NOTE: See notes on page I Excellence in Air Distribution KRUEGER 212
12 I1I,,, Series Supply,, Series Performance Data: Horizontal Throw KRUEGER 212 IP DATA:, 5,, 5, 55, 55,,,, 5 (WITH OBD/MULTILOUVER) in ft² FPM CFM "WG ft "WG ft "WG ft " x " " x " " x " " x " " x " " x " " x " " x " " x " " x " " x " NOTE: See notes on page I137. Providing You With Air Distribution Solutions I135
13 I1I I136,,, Series Supply,, Series Performance Data: Horizontal Throw IP DATA:, 5,, 5, 55, 55,,,, 5 (WITH OBD/MULTILOUVER) in ft² FPM CFM "WG ft "WG ft "WG ft " x " " x " " x " " x " " x " " x " " x " " x " " x " " x " " x " NOTE: See notes on page I Excellence in Air Distribution KRUEGER 212
14 I1I,,, Series Supply,, Series Performance Data: Horizontal Throw IP DATA:, 5,, 5, 55, 55,,,, 5 (WITH OBD/MULTILOUVER) in ft² FPM CFM "WG ft "WG ft "WG ft " x " " x " " x " " x " " x " " x " NOTES: Throw values are given for terminal velocities of 15, 1, and 5 FPM. Throw values are given for isothermal conditions. values are based on octave band 2 7 sound power levels minus a room absorption of 1dB, re 1 12 Watts. Dash in space denotes a or db value of less than 1. Data was obtained from tests conducted in accordance with ANSI/ASHRAE Standard 7, ISO Standard 5219, and ISO Standard 371. See correction factors in table below. See Krueger s selection software for performance data not shown, including octave band data. Correction Damper (Add) Correction Blade Deflection (Add) Throw Correction (Multiply) Pt Correction (Multiply) OBD No OBD º 22.5º 5º OBD No OBD OBD No OBD KRUEGER 212 Providing You With Air Distribution Solutions I137
15 I1I I13,,, Series Supply,, Series Performance Data: Horizontal Throw METRIC DATA:, 5,, 5, 55, 55,,,, 5 (WITH OBD/MULTILOUVER) mm m² m/s L/s Pa m Pa m Pa m x x x x x x x x x x x NOTE: See notes on page I13. Excellence in Air Distribution KRUEGER 212
16 I1I,,, Series Supply,, Series Performance Data: Horizontal Throw KRUEGER 212 METRIC DATA:, 5,, 5, 55, 55,,,, 5 (WITH OBD/MULTILOUVER) mm m² m/s L/s Pa m Pa m Pa m x x x x x x x x x x x NOTE: See notes on page I13. Providing You With Air Distribution Solutions I139
17 I1I I1,,, Series Supply,, Series Performance Data: Horizontal Throw METRIC DATA:, 5,, 5, 55, 55,,,, 5 (WITH OBD/MULTILOUVER) mm m² m/s L/s Pa m Pa m Pa m x x x x x x x x x x x NOTE: See notes on page I13. Excellence in Air Distribution KRUEGER 212
18 I1I,,, Series Supply,, Series Performance Data: Horizontal Throw KRUEGER 212 METRIC DATA:, 5,, 5, 55, 55,,,, 5 (WITH OBD/MULTILOUVER) mm m² m/s L/s Pa m Pa m Pa m x x x x x x x x x x x NOTE: See notes on page I13. Providing You With Air Distribution Solutions I11
19 I1I I12,,, Series Supply,, Series Performance Data: Horizontal Throw METRIC DATA:, 5,, 5, 55, 55,,,, 5 (WITH OBD/MULTILOUVER) mm m² m/s L/s Pa m Pa m Pa m x x x x x x x x x x x NOTE: See notes on page I13. Excellence in Air Distribution KRUEGER 212
20 I1I,,, Series Supply,, Series Performance Data: Horizontal Throw METRIC DATA:, 5,, 5, 55, 55,,,, 5 (WITH OBD/MULTILOUVER) mm m² m/s L/s Pa m Pa m Pa m x x x x x x NOTES: Throw values are given for terminal velocities of.75,.5, and.25 m/s. Throw values are given for isothermal conditions. values are based on octave band 2 7 sound power levels minus a room absorption of 1dB, re 1 12 Watts. Dash in space denotes a or db value of less than 1. Data was obtained from tests conducted in accordance with ANSI/ASHRAE Standard 7, ISO Standard 5219, and ISO Standard 371. See correction factors in table below. See Krueger s selection software for performance data not shown, including octave band data. Correction Damper (Add) Correction Blade Deflection (Add) Throw Correction (Multiply) Pt Correction (Multiply) OBD No OBD º 22.5º 5º OBD No OBD OBD No OBD KRUEGER 212 Providing You With Air Distribution Solutions I13
D1-2. Table of Contents MODULAR CORE DIFFUSERS. 1240, Introduction & Product Description... D1-3. Dimensional Information...
D Table of Contents, These supply, ceiling diffusers feature four handremovable modular cores. Available in steel or aluminum construction. P, P These supply, ceiling diffusers feature four handremovable
M1-2. Table of Contents INDUSTRIAL GRILLES. 680, 5680, 6880, 56880, 680MP, 5680MP Introduction... M1-3 Dimensional Data... M1-4
1 Table of Contents & These industrial supply grilles feature adjustable, single deflection, extruded aluminum airfoil blades with a steel or extruded aluminum frame. Horizontal or vertical blades at 1
J1-2. Table of Contents RETURN GRILLES
J1 RETURN GRILLE Table of Contents RETURN GRILLE / These fixedblade return grilles feature 3/4 blade spacing. Deflection will be fixed at 3 or. Available in aluminum or steel construction. / These fixedblade
K1-2. Table of Contents LINEAR BAR GRILLES 1500, 1500MC, 1800, 1800MC
K Table of Contents, This series of extruded aluminum supply and return linear bar grilles are for ceiling, sidewall, sill (), and floor () applications. Blade thickness is 7/32., This series of extruded
6490, These perforated. ceiling returns feature a. square neck. Aluminum or steel perforated face. is available. 6600, 56600, 6600FR
C1 Table of Contents 1, 15 51, 515 supply ceiling diffusers feature a neck mounted rotatable core with either a round or square neck. Aluminum or steel perforated face is available. 2, 52 2FR, 2F supply,
6490, These perforated. ceiling returns feature a. square neck. Aluminum or steel perforated face. is available. 6600, 56600, 6600FR
C Table of Contents 6, 6 6, 6 supply ceiling diffusers feature a neck mounted rotatable core with either a round or square neck. Aluminum or steel perforated face is available. 62, 62 62FR, 629F supply,
ROUND DIFFUSERS G1. RM, RA Series Cone Diffusers. Introduction: RM, RA Series ROUND DIFFUSERS R M - R A S E R I E S
OUND DIFFUSES G, A Series Cone Diffusers Introduction:, A Series Krueger s /A round ceiling diffusers provide excellent performance in variable air volume systems. The round ceiling diffusers have three
J1-2. Table of Contents RETURN GRILLES
J1 RETURN GRILLE Table of Contents RETURN GRILLE / These fixedblade return grilles feature 3/4 blade spacing. Deflection will be fixed at 3 or. Available in aluminum or steel construction. / These fixedblade
B1-2. Table of Contents LOUVERED FACE DIFFUSERS
Table of Contents 2, FR,, M & M feature a round neck and four cones. & feature a round neck, four cones, and adjustable pattern controllers.,, M, & M feature a round neck and three cones. & feature a round
B1-2. Table of Contents LOUVERED FACE DIFFUSERS
B1 LOUEED FACE DIFFUE Table of Contents LOUEED FACE DIFFUE B12 1400, 1400F, 1400, M1400 & M1400 feature a round neck and four cones. 1400A & 1400A feature a round neck, four cones, and adjustable pattern
B1-2. Table of Contents LOUVERED FACE DIFFUSERS
1 LOUVERED FACE DIFFUER Table of Contents LOUVERED FACE DIFFUER 12 1400, 1400FR, 1400, M1400 & M1400 These supply diffusers feature a round neck and four cones. 1400A & 1400A These supply diffusers feature
L1-2. Table of Contents SECURITY GRILLES 1310, 1310TF, Introduction & Dimensional Information... L1-13
L Table of Contents 0, 0TF & 50 These perforated face supply grilles feature 5/6 diameter holes on 7/6 staggered centers. This perforated face supply grille features /6 diameter holes on 9/2 staggered
CRNRR, 5CRNRR These concentric ring nozzles feature a stub duct mounting frame for smaller duct work
H1 AI NOZZLES & OUN GILLES Table of Contents AI NOZZLES & OUN GILLES PN This round punkah nozzle features a surface mounting frame. PN This round punkah nozzle features a stub duct mounting frame. PN This
LINEAR DIFFUSERS AND BAR GRILLES
49-240 48LL1 49-280 49-480 48LL2 Linear ar Grilles The Nailor 4900 Series provides an extruded aluminum bar grille that offers beautiful styling and efficient performance. Linear bar grilles offer a choice
A1-2. Table of Contents ARCHITECTURAL & PLAQUE DIFFUSERS
A1 Table of Contents PRIM features an arcuate faceplate. Center square appliqué offers nine standard colors to match interior décor. PLQ & 5PLQ features a square plaque faceplate. PLQR features a round
LOUVERED FACE GRILLES AND REGISTERS
Performance Notes for Supply rilles and Registers, 6 and 67 Series Throw, Spread and Drop The isovel diagrams shown below, illustrate in plan view, the relationship of horizontal spread to throw for three
F1-2. Table of Contents PLENUM SLOT DIFFUSERS PTBS. Introduction & Dimensional Information... F1-3. Accessories... F1-54. Reference Charts...
F1 LENUM LO DIFFUE able of ontents his plenum slot supply diffuser features an adjustable blade. lots: 1 to 4 lot Widths: ¾, 1, 1½ Introduction & Dimensional Information... F13 Accessories... F15 eference
Series DD & SD-20 Supply Grilles & Registers
Series DD & SD-20 Supply Grilles & Registers Grille - Two Sets of Louver Blades Model DDL-20 Two sets of louver blades. Front set parallel to long dimension. Rear set parallel to short dimension. All louver
SECURITY PRODUCTS GENERAL PRODUCT OVERVIEW. Security Products
GENERAL PRODUCT OVERVIEW Security Products Nailor offers a complete line of Security Grilles, Registers and Diffusers. The product line includes grilles and registers for maximum, medium and minimum security
SECURITY PRODUCTS GENERAL PRODUCT OVERVIEW. Security Products
GENERAL PRODUCT OVERVIEW Security Products Nailor offers a complete line of Security Grilles, Registers and Diffusers. The product line includes grilles and registers for maximum, medium and minimum security
D3-2. Table of Contents DISPLACEMENT VENTILATION
D3 Table of Contents This rectangular unit is ideal for wall or ceiling installations. B The U-shaped 180 discharge pattern and high capacity is ideal for retail spaces, commercial, or lobbies. ENGINEERING
Square/Rect. and Square Louvered Face and Plaque Face Diffuser
/Rect. and Louvered Face and Plaque Face Diffuser Series J: Easily Adjustable from Horizontal to Vertical Vertical Discharge Application: Carnes steel (SK) and aluminum (SE) louvered face diffusers are
SUPPLY ROUND DIFFUSERS TABLE OF CONTENTS ROUND DIFFUSERS. M-2 Excellence in Air Distribution MODELS RM1/5RM1/RM2/5RM2/RM4/5RM4/RA2/RA4
SUPPLY OUN IFFUSES TBLE OF CONTENTS OUN IFFUSES 1/51 These supply ceiling diffusers discharge horizontally only. They feature three cones with two position settings to control room air induction. 2/52/2
MODULAR CORE CEILING DIFFUSERS
MOEL SQUARE 12345-10 MOULAR CORE SQUARE IFFUSERS ROUN NECK SQUARE 1, 2, 3 OR ROUN 4-WAY AJUSTABLE NECK SQUARE ISCHARGE ROUN PATTERN NECK Steel Model: 7500 Suffix '-O' adds a steel opposed blade damper
SECURITY PRODUCTS GENERAL PRODUCT OVERVIEW. Security Products
GENERAL PRODUCT OVERVIEW Security Products Nailor offers a complete line of Security Grilles, Registers and Diffusers. The product line includes grilles and registers for maximum, medium and minimum security
DRUM LOUVERS DRUM LOUVERS 45DL SERIES. Models: 45DL1 Single Vanes 45DL2 Split Vanes G151 HIGH CAPACITY LONG THROW ALUMINUM CONSTRUCTION
DRUM LOUVERS 45DL SERIES HIH CAPACITY LON THROW ALUMINUM CONSTRUCTION Models: Single Vanes 45DL2 Split Vanes Suffix '-O' adds a steel opposed blade damper Models -O and 45DL2 Model Series 45DL Drum Louvers
RPD ROUND PLAQUE DIFFUSER
ROUND PLAQUE DIFFUSER s (RPD) provide a balance between engineering and architectural needs, with a flush appearance and superior VAV performance in both ceiling and exposed duct mounting applications.
Wall and Ceiling Grille
September 14 Wall and Ceiling Grille Models SD, DD, EC, PG, G45, NVG, NB, GN, WB and GW Single and Double Deflection Fixed and Removable Core Eggcrate Perforated Grille 45 Fixed Blade Non Vision Bar Grilles
LINEAR SLOT DIFFUSERS PLENUMS
LINEAR SLOT DIFFUSER PLENUMS ADAPTORS FOR MODEL SERIES 5000 LINEAR SLOT CEILING DIFFUSERS Standard Models: 5350(I) 1/2" (13) Slot 5375(I) 3/4" (19) Slot 5310(I) 1" (25) Slot Modified Performance Models:
for Pleasant & Healthy Air-Distribution ISO 9001:2000 Linear Bar & Floor Grilles Product Bulletin 135-D
for Pleasant & Healthy Air-Distribution ISO 90012000 Product Bulletin 135-D Linear Bar & Floor Grilles Pleasant.. Serene.. YOU & DASCO... Since 1964 Partners for good health INTRODUCTION DASCO Linear Bar
LINEAR DIFFUSERS AND BAR GRILLES
LINEAR DIFFUSERS AND AR GRILLES LINEAR DIFFUSERS AND AR GRILLES LINEAR SLOT DIFFUSER PLENUMS FOR TECHZONE TYPE CEILINGS Model Series 5300TZ Plenums are designed to fit the 5000TZ Series Slot Diffusers.
Product Nomenclature G-X-AB-Z 0 = Zero Degree, 1 = 15 Degree, 2 = 15 Degree (2-way)
Fixed Bar Grills - Series G Description Caryaire Fixed Bar Grills are ideal for Supply as well as Return air, in both Cooling as well as Heating. It can be used in high side wall or ceiling applications.
Premium Correctional Air Distribution. The First Name in Air Diffusion.
Premium Correctional Air Distribution The First Name in Air Diffusion www.anemostat.com PRODUCT DIRECTORY APPLICATIONS Stainless Steel S-Vent MAXIMUM SECURITY GRILLES NEW CONSTRUCTION page 16 page 4 &
ISSUE B, OCT Architectural Square Ceiling Diffusers. UNI & AUNI Diffusers. Advanced Air
ISSUE B, OCT 2009 Architectural Square Ceiling Diffusers UNI & AUNI Diffusers Product Overview - Uni Series Architectural Ceiling Diffusers Uni Series High Performance Square Face Round Neck The Model
Application Guidelines
Grilles and Registers Application Guidelines Introduction Overview It is the intent of this section to give some basic application guidelines for the use of supply and return grilles and registers in a
EGG CRATE RETURN GRILLE
80 EGG CRATE RETURN GRILLE 80 The 80 Series is available in various mounting styles and features sturdy construction, consisting of a heavy gauge aluminum grid core, optional extruded aluminum borders
GRILLES AND REGISTERS
Airfoil Blade Return Air Models 71FH, 7145H 45 Deflection, 3/4" (19) Blade Spacing The airfoil blades are fixed at a 45 angle. This grille is vision proof when installed in a low or high sidewall location
GRD PRODUCT CATALOG DISPLACEMENT VENTILATION PRODUCTS
GRD PRODUCT CATALOG PRODUCTS 2018 Metal Industries, Inc. PRODUCTS Displacement Ventilation systems provide conditioned air at floor level at very low velocity and allow heat sources within the room (like
EXTRUDED ALUMINUM LINEAR BAR GRILLES AND REGISTERS
SAUDI AIR CONTROL SYSTEM INDUSTRIAL REGISTRATION NO.353 EXTRUDED ALUMINUM LINEAR BAR GRILLES AND REGISTERS EXTRUDED ALUMINUM LINEAR BAR GRILLES AND REGISTERS SERIES GLG and GLR 1, 2, 3, 4/5,6,7,8,9,10.
Application Guidelines
Grilles and Registers Application Guidelines Introduction Overview It is the intent of this section to give some basic application guidelines for the use of supply and return grilles and registers in a
GRILLES AND REGISTERS
RILLES AND REISTERS Models 45DL1, 45DL2 Models 813SH-O, 813DV Drum Louvers These extruded aluminum drum louvers are appropriate when high volumes of air are used and in spot heating and cooling applications.
SPD SQUARE PLAQUE DIFFUSER
SQUARE PLAQUE DIFFUSER The (SPD) has a flush appearance, making it ideal for architecturally-conscience commercial spaces, and provides industry-leading low pressure drop and sound generation with a 360
GRILLES AND REGISTERS
Heavy Duty Steel rilles and Registers, ymnasium Strength Nailor s Heavy Duty Steel rilles and Registers are manufactured with 16 gauge steel frames and 14 gauge steel blades which gives them strength to
fsfdfsdfsdfssfsf OMNI DIFFUSER
fsfdfsdfsdfssfsf OMNI DIFFUSER Architectural Ceiling Diffusers diffusers OMNI The Titus OMNI diffuser satisfies architectural as well as engineering criteria. Its strong, clean, unobtrusive lines harmonize
GRILLES AND REGISTERS
RILLES AND REISERS HEAVY DUY SAINLESS SEEL his grille is used mainly for return air applications that require strength and durability in corrosive or high humidity environments. he frame is welded and
Steel Single Deflection Supply Grille, Register (RSSB, RTSB)
Steel Single Deflection Supply Grille, Register (RSSB, RTSB) 1-3/8 2-9/16 Listed Size +2 Listed Size - 2/3 Listed Size 1-1/4 Listed Size +2 3/4 Application: Single Deflection Supply R&G provide a discharge
PERFORATED CEILING DIFFUSERS
PERFORAE MOEL PERFORAE 12345-10 CEILING SQUARE IFFUSERS ROUN NECK SQUARE ROUN NECK SUPPLY SQUARE 1, 2, 3 OR ROUN 4-WAY AJUSABLE NECK ISCHARGE PAERN Steel Models: 4320 Flush Face 4325 rop Face Aluminum
CONCENTRIC Product Information & Applications
CONCENTRIC Product Information & pplications Concentrics s the leading manufacturer of Concentric Diffusers for the past 30 years, Ruskin Rooftop Systems offers a cost effective way of distributing air
INDEX. Chapter3. air master. Linear Bar Grilles
Chapter3 INDEX A Linear bar grilles: 1. Supply linear bar grille...: ASLG...3.1 2. Supply linear bar register...: ASLR...3.2 3. Return linear bar grille...: ARLG...3.3 4. Return linear bar register...:
HCD-230 Industrial Control Damper
Application and Design Model is a heavy duty industrial control damper with a flanged frame. It is designed to control airflow and provide shut off in HVAC or industrial process control systems. A variety
PERFORATED CEILING DIFFUSERS
PERFORAE PERFORAE CURVE MOEL BLAE 12345-10 IFFUSERS SQUARE ROUN NECK SQUARE SUPPLYROUN NECK 4-WAY AJUSABLE ISCHARGE SQUARE ROUN NECK PAERN (SANAR) 1, 2 OR 3-WAY ISCHARGE PAERN (OPIONAL) Steel Models: 4320CB
STATIONARY LOUVERS STATIONARY LOUVERS STATIONARY LOUVERS
STATIONARY LOUVERS 14 15 STATIONARY LOUVER STATIONARY LOUVER SSL - 100 SSL SERIES SSL SERIES [SSL - 100, SSL - 110, SSL - 120] Air Performance Pressure Drop SSL - 100 Stationary Louver is a weather louver
500-YCI SERIES FAN-POWERED AIR TERMINAL UNIT FORM EG2 (404)
500-YCI SERIES FAN-POWERED AIR TERMINAL UNIT Table of Contents General Information...3 500-YCI Features...4-5 Dimensional Data...6-7 ARI Rating Points...8 Statement of Standard Test Conformity...8 Motor
GRILLES AND REGISTERS
Heavy Duty Steel rilles and Registers, ymnasium Strength Nailor s Heavy Duty Steel rilles and Registers are manufactured with 16 gauge steel frames and 14 gauge steel blades which gives them strength to
Extruded Aluminum Construction 1/4 Bars on 1/2 Centers Floor, Sidewall or Ceiling Mount Pencil Proof
OVERVIEW Linear Bar, Grilles and Registers OVERVIEW LINEAR BAR, GRILLES and REGISTERS Curtainaire Trimaire Varicore Extruded Aluminum Construction 1/4 Bars on 1/2 Centers Floor, Sidewall or Ceiling Mount
FlowBar High Capacity Slot Diffuser
October 2016 FlowBar High Capacity Diffuser Model HT (High Throw) Model JT (Jet Throw) Features HT & JT 25mm, 38mm, 51mm, 63mm & 76mm s Ceiling or Sidewall Applications Modular or Continuous s Curved Sections
Optima EXHAUST GRILL AND AIR LOUVER. Perforated Ceiling Diffusers. Features: Standard square sizes:
Perforated Ceiling Diffusers OPTIMA ceiling diffuser with perforated face, are recoended for heating, ventilating and cooling in centralized air conditioning systems. Perforated face diffusers, with 4-3-
GRILLES AND REGISTERS
RILLES AND REISTERS RETURN AIR FIXED BARS This return air grille has extruded aluminum fixed blades that are reinforced for strength. Models H-HD, V-HD, FH-HD, FV-HD Page 1 Suffix '-O' adds a steel OBD
Series HCD Airfoil Control Damper
Series HCD Airfoil Control Damper Model: HCD-1 The Holyoake HCD-1 is a precisely made volume and pressure control device with extremely low leakage when closed, (in the range of 0.003m 3 /s at 100 Pa).
GRILLES AND REGISTERS
Curved Spiral Duct rilles Nailor s unique curved spiral duct grille design offers an architecturally superior appearance and saves installation time and money by directly mounting to the duct. This eliminates
GRILLES AND REGISTERS
RILLES AND REISERS CURVED SPIRAL DUC RILLES Nailor s unique curved spiral duct grille design offers an architecturally superior appearance and saves installation time and money by directly mounting to
GRILLES AND REGISTERS
HEAVY DUY SAINLESS SEEL his grille is used mainly for return air applications that require strength and durability in corrosive or high humidity environments. he frame is welded and the blades are spaced
Catalog Swirl diffuser DAL 359
Catalog 1.1.1 DAL 359 Restaurant, Lingen, Germany DAL 359 Model Description, area of application and product benefits............ DAL 359 1 Configuration...................................................
DCG Adjustable Aluminum Round Diffusers
51 DCG Adjustable Aluminum Round Diffusers H V A C TM Rev 27-05-2018 52 DCG SEries Aluminum Adjustable Round Diffusers Adjust core up and down to move from horizontal to vertical airflow Architecturally
High Performance Fan Coils FCHG Genesis Series Horizontal
Dimensional Data 5 7 /8 (150) D 14 (356) 2 (51) Diverter - Slides Into Discharge Ductwork Optional: Second Drain Pan Connection E Coil Section X Dimensional Data - IP (in.) / SI [mm] Unit Fan Outlet Duct
GRILLES AND REGISTERS
AIRFOIL BLADE RETURN AIR 45 DEFLECTION, 3/4 () BLADE SPACIN The airfoil blades are fixed at a 45 angle. This grille is vision proof when installed in a low or high sidewall location with grille blade deflection
Incorporating V2.0. Product spec >>> > Series DD - Double deflection grilles
Incorporating V2.0 Product spec >>> > Series DD - Double deflection grilles Grilles Double deflection Recommended for: Wall, ceiling & duct Supply & extract Overview Enhanced functionality As per the name,
EX C E L L E N C E ISO 9001 CERTIFIED COMPANY LINEAR BAR GRILLES.
25 YEARS OF EX C E L L E N C E ISO 9001 CERTIFIED COMPANY 3.0 INDEX ISO 9001 CERTIFIED COMPANY SECTION TOPIC PAGE 3.1 Double deflection linear bar grille ASLG 3 3.2 Double deflection linear bar register
500-YVI PARALLEL FAN-POWERED AIR TERMINAL UNIT FORM EG3 (404)
500-YVI PARALLEL FAN-POWERED AIR TERMINAL UNIT Table of Contents Introduction...3 500-YVI Features...4-5 Dimensional Data...6-7 ARI Rating Points...8 Statement of Standard Test Conformity...8 Motor Amperage
OVERVIEW Combination Supply/Return Diffuser (SARM)
OVERVIEW Combination Supply/Return Diffuser (SARM) APPLICATION INFORMATION The extruded aluminum square and rectangular supply and return diffusers are designed principally for packaged roof top type heating
STEEL LOUVERED DIFFUSERS [CFM Range is only a guide. See Manufacturer Catalog for complete data. All NC Levels in Acceptable Range<32.
STEEL LOUVERED DIFFUSERS TUTTLE & BAILEY Model 1300 - Round Neck Steel, Lay-In Tee Bar Mounting Neck Size Panel Size CFM Range Price Each Volume Damper Model RBN *6 12 x 12 75-180 $19 $12 6 24 x 24 75-180
makes sure products are delivered Products are offered in steel,
Residential Construction Features Residential Registers, Grilles & Diffusers No one satisfies the demands for For example: an electro-deposition air distribution solutions better than paint creates a flawless
CUSTOM FLOW ARCHITECTURAL SLOT DIFFUSER
ARCHITECTURAL SLOT DIFFUSER Custom Flow (CF) slot diffusers are uniquely designed for curving and long continuous installations. The CF offers a large range of airflow flexibility with one or two slot
CEILING DIFFUSERS GENERAL PRODUCT OVERVIEW
CEILING IFFUSERS CEILING IFFUSERS GENERAL PROUCT OVERVIEW Ceiling iffusers Quality Assured Products, unobtrusive clean lines for appearance, careful engineering and professional workmanship with the backing
CEILING DIFFUSERS CEILING DIFFUSERS
CEILING IFFUSERS "TWISTER" HIGH INUCTION STAMPE FACE The "Twister" diffuser is engineered to optimize air distribution effectiveness. This next generation diffuser has a high induction, 360 swirl pattern
500-YH SINGLE DUCT AIR TERMINAL UNIT FORM EG1 (1101)
500-YH SINGLE DUCT AIR TERMINAL UNIT FORM 130.12-EG1 (1101) Table of Contents General Description.......................................................................3 500-YH Features........................................................................4-5
SPD/SPDV SPD SPDV. High Velocity/High Aspiration Air Outlet. Construction
SPD/SPDV SPD O D-1/8 C Saturn Plaque Diffuser US Patent B H SPDV SPD Dimensions in Inches MODEL A B C D H O SPD-04 7-1/2 2 1-1/4 4 3-3/4 5-1/8 SPD-06 10 2 1-3/16 6 4 7-1/2 SPD-08 12 2 1-3/16 8 4 9-1/2
SINGLE DUCT AIR TERMINAL UNITS
SINGLE DUCT AIR terminal units SINGLE DUCT AIR TERMINAL UNITS MODEL NUMBER LEGEND XXXXX XXX -XXXX Model TH TL THECO Inlet Size (04, 05, 06, etc.) Generation 5, 6, 7 The METALAIRE single duct terminal units
CEILING DIFFUSERS D12 CEILING DIFFUSERS
PREMIUM This perforated return has an extruded aluminum frame with a narrow border that is visible within the T-Bar module. See Model Series 4330 and 4330CB for the matching supply air diffusers. Flush
PATTERN CEILING DIFFUSERS
PATTERN CEILING IFFUSERS Model 4260 Model 7500 Eggcrate Return This aluminum face return diffuser features 1/2" x 1/2" x 1/2" (13 x 13 x 13) eggcrate that provides a high free area. It is offered with
INLET BOXES AND INLET-BOX DAMPERS
INLET BOXES AND INLET-BOX DAMPERS Available on these Arrangement 1, 4, 8, 9, 9F, and 10 fans: GENERAL PURPOSE FANS ACOUSTAFOIL/PLR FANS CLASS IV FANS AF FANS RTS FANS GI FANS HPBC FANS BC FANS BCPB FANS
Integrated 1/4" Pressure Port (Balancing/commissioning) (Accessible From Face Side) Cooling Water Connections
Dimensional Data Integrated 1/4" Pressure Port (Balancing/commissioning) (Accessible From Face Side) Heating Water Connections (Not Supplied On 2 Pipe) Primary Air Connection (D - 1/8") 4 Way Air Discharge
Ventilation grilles for installation into walls, sills or rectangular
X X testregistrierung Ventilation grilles for installation into walls, sills or rectangular ducts Type Ventilation grilles, made of aluminium, with fixed horizontal blades also for horizontal runs Single
Catalogue. FlowBar. High Capacity Slot Diffuser.
Catalogue FlowBar High Capacity Slot Diffuser www.air-diffusion.co.uk sales@air-diffusion.co.uk Content Introduction... 4 Diffuser Specification... 5 Air Patterns... 6 Flange Styles... 7 Curved Sections...
Ventilation grilles for installation into walls, sills or rectangular
X X testregistrierung Ventilation grilles for installation into walls, sills or rectangular ducts Type Ventilation grilles, made of sheet steel, with individually adjustable, horizontal blades Ventilation
INDEX. Chapter2. air master. Grilles and Registers
Chapter2 INDEX A.Grilles and registers. 1. Supply air grille - front horizontal blades...: ASG-H...2.1 2. Supply air grille - front vertical blades...: ASG-V...2.2 3. Supply air register - front horizontal
Linear Slot Diffusers Model Slot 20 & Model Slot 25
Model Slot & Model Slot 25 Contents Introduction!!!!!! Page 3 Di"user Specification!!!! Page 4 Air Patterns!!!!!! Page 5 Flange Styles!!!!!! Page 6 Corner Sections!!!!! Page 7 Selection Procedure!!!! Page
Ventilation grilles for installation into walls, sills or rectangular
X X testregistrierung Ventilation grilles for installation into walls, sills or rectangular ducts Type Ventilation grilles with flat border construction also for continuous horizontal runs The new ventilation
CEILING DIFFUSERS GENERAL PRODUCT OVERVIEW
GENERAL PROUCT OVERVIEW Ceiling iffusers Quality Assured Products, unobtrusive clean lines for appearance, careful engineering and professional workmanship with the backing of an industry leader - these
CEILING DIFFUSERS CEILING DIFFUSERS
CEILING IFFUSERS "TWISTER" HIGH INUCTION STAMPE FACE The "Twister" diffuser is engineered to optimize air distribution effectiveness. This next generation diffuser has a high induction, 360 swirl pattern
LAMINAR FLOW DIFFUSER Model DLAB
Laminar & Radial Flow Diffuser LAMINAR FLOW DIFFUSER Model DLAB Application Laminar Flow diffusers are used to deliver air to surface directly underneath in a non-aspirating air pattern, with the minimum
CEILING DIFFUSERS CEILING DIFFUSERS
"TWISTER" HIGH INUCTION STAMPE FACE The "Twister" diffuser is engineered to optimize air distribution effectiveness. This next generation diffuser has a high induction, 360 swirl pattern for a superior
DRUM JET DIFFUSERS TYPE: DJA DJB DJAP DJBP
TYPE: DJA DJB DJAP DJBP APPLICATION Type DJ As with type AJ diffusers, this product is also designed to project large volumes of air over long distances, but particularly lends itself to sidewall or ductmounting,
FCVC Series VERTICAL FAN COILS
VERTICAL FAN COILS The FCVC is designed for concealed, wall mounted installations with flexible heating/ cooling loads and minimal duct requirements. With a variety of options, such as fiber free insulation,
Multicore diffusers. introduction. type control. options. finish. sizes SQUARE AND RECTANGULAR DIFFUSERS
SQUARE AND RECTANGULAR DIFFUSERS introduction The IC diffuser is a versatile form of air terminal offering the facility of multi directional throw patterns in a wide range of frame sizes. Each core style
HCD-135. Industrial Control Damper. Application and Design. Ratings (see page 2 and 3 for specific limitations) Standard Construction.
Application and Design Model is a heavy duty industrial control damper with a flanged frame. It is designed to control airflow and provide shut off in HVAC or industrial process control systems. A variety
WE GUIDE AIR LOUVERS
WE GUIDE AIR LOUVERS index >> SAND TRAP LOUVERS - STL / STLC 01-02 >> 2 INCH EXHAUST AIR LOUVERS - EAL - 2 03 >> 4 INCH EXHAUST AIR LOUVERS - EAL - 4 04 >> GRAVITY AIR LOUVERS - GAL 05 >> FRESH AIR LOUVERS
CEILING DIFFUSERS. Supply Air
Perforated Ceiling iffusers Nailor manufactures a full range of supply air and matching return air Perforated Ceiling iffusers. he perforated face is available in both corrosion-resistant steel and aluminum,
LINEAR DIFFUSERS AND BAR GRILLES
LINEAR DIFFUSERS AND AR GRILLES GENERAL PRODUCT OVERVIEW Linear Diffusers and ar Grilles Linear type diffusers and grilles have been developed to satisfy architectural and engineering applications that
Catalog Air Terminal Units. Models MQTH, MQFCI and MQFVI. Model MQTH. Model MQFCI. Model MQFVI
Air Terminal Units Models MQTH, MQFCI and MQFVI Catalog 903-1 Model MQTH Model MQFCI Model MQFVI Table of Contents Single Duct Air Terminal Units.... 3 Introduction....3 MQTH-500 Single Duct Air Terminal