CUSTOM FLOW ARCHITECTURAL SLOT DIFFUSER
|
|
- Collin Daniels
- 5 years ago
- Views:
Transcription
1 ARCHITECTURAL SLOT DIFFUSER
2 Custom Flow (CF) slot diffusers are uniquely designed for curving and long continuous installations. The CF offers a large range of airflow flexibility with one or two slot arrangements, various slot widths, and vertical or horizontal pattern adjustment. Extruded aluminum construction Fully adjustable pattern controllers provide air pattern flexibility Custom curving options for architectural applications Various slot widths and quantities to meet airflow capacity requirements 2 For more information visit
3 DESIGN FLEXIBILITY Custom Flow diffusers feature extruded aluminum construction and are ideal for highly architectural applications. The CF is available with countless design options to provide ultimate flexibility, including: + + Adjusta (horizontal air pattern) and Jet (vertical air pattern) pattern controller configurations to maximize air pattern performance. + + Five slot widths for low, medium, and high capacity requirements. + + Multiple frame styles including: exposed mounting, mud-in concealed frame, tegular and Techzone. + + Discrete and continuous sections. Continuous installations are supplied with alignment strips for high quality architectural installations. + + Flexible position for supply plenums, allowing active and return sections along the same diffuser. This is popular for continuous slot, perimeter applications. + + Flat-faced, convex and concave curving sections that easily integrate with straight sections. + + Flat, inside and outside mitered corners. + + Assemblies can be easily trimmed to length on-site to meet exact room dimensions. + + Multiple finish options, including anodized and wood-grain. TYPICAL APPLICATIONS Custom Flow linear diffusers are specifically designed for the most demanding architectural and performance applications. As a premium linear slot diffuser, Custom Flow is manufactured using extruded aluminum ensuring a crisp, clean appearance. Custom Flow is ideal for long, continuous runs and often used for perimeter heating and cooling. CONSTRUCTION + + Pattern Controller Style Adjusta Jet Return + + s 1 in. 1 ½ in. 2 in. 2 ½ in. 3 in. + + quantity 1 or 2 Various mounting options designed for ease of installation For more information visit 3
4 PATTERN CONTROLLER STYLE Custom Flow diffusers offer superior performance and function, featuring dual layered pattern controllers for full airflow adjustment, dampering and blank-off capabilities. The pattern controllers are provided in section lengths up to 24 in.; this feature provides multiple pattern and airflow possibilities along the length of a continuous diffuser. Pattern controller styles may be selected for optimal horizontal (Adjusta ) or vertical (Jet ) airflow performance. Adjusta-slot (AS) + + Adjusta-slot pattern controllers are designed for ceiling installations and produce a strong, horizontal air pattern over a wide range of ariflows. + + Adjusta-slot units are particularly well suited for open office perimeter zones, main floor entrance foyers and lobbies, elevator lobbies, conference rooms, mall atriums and theatres. Continuous installations are typically located at the perimeter of a zone in which a large air volume must be introduced. One slot air pattern adjustment Horizontal Vertical Angular Two slot air pattern adjustment (may differ for each slot) Opposed horizontal Horizontal & vertical Volume adjustments Fully open Partially dampered Shutoff 4 For more information visit
5 Jet-slot (JS) + + Jet-slot pattern controllers are designed to provide a strong vertical air pattern perpendicular to the diffuser face. + + Jet-slot diffusers are ideal for projecting conditioned air down a high perimeter window where it is necessary for airflow to reach the floor to prevent stagnant zones, as well as interior zones with unusually high ceilings, such as auditoriums, entrance foyers, mall atriums, convention centers and theaters. One slot air pattern adjustment Horizontal Vertical Angular Two slot air pattern adjustment (may differ for each slot) Opposed horizontal Horizontal & vertical Volume adjustments NOTE: PATTERN CONTROLLERS MUST BE DAMPERED SLIGHTLY IN ORDER TO ACHIEVE HORIZONTAL PATTERN IN 2 SLOT CONFIGURATIONS Fully open Partially dampered Shutoff OPTIONAL ACCESSORIES + + Custom Flow Architectural Diffusers are available with an assortment of accessories including: Return Air Sight Baffle Metal Blank-Offs Sight Baffle Blank-Off For more information visit 5
6 USTA SLOT AS - ADJUSTA SLOT JS - JET SLOT JS - JET SLOT RT - RETURN RT - RETURN STYLE: Architectural CF - CUSTOM Diffuser FLOW SLOT QUANTITY: Submittal Sheet CONFIGURATION OPTIONS F - Frame Style SLOT JS - JET SLOT LOT 2 SLOT LI - TEE BAR LAY-IN RT - RETURN 1 SLOT 2 SLOT LI - TEE BAR LAY-IN APPLICATION OPENING/PLENUM APPLICATION WIDTH APPLICATION: OPENING/PLENUM WIDTH W Submittal OPENING/PLENUM Sheet WIDTH APPLICATION: SM - SURFACE MOUNT DRYWALL APPLICATION (SM (CMF) ONLY) OPENING/PLENUM PLENUM WIDTH H (EF) E (CMF) E (EF) W WIDTH (SM)* 1 4" (184) (LI) 6 7 8" (175) 5 3 4" (146) 6 3 8" (162) 7 16" (164) 2 3 8" (60) (CMF ONLY) 4" (57) 8" (73) 9 16" (65) " (64) 4" (184) 6 (LI 7 ONLY) 8" (175) 5 3 4" (146) 2 1 2" (64) 2 3 8" (60) 2 1 4" (57) 2 7 8" (73) " (65) 2 1 2" (64) " (110) " (99) 2 3 4" (70) 3 3 8" (86) " (62) 16" (46) 1 3 4" (44) 8" (321) " (311) ENGINEER: " (281) " (321) " 12 (297) 1 4" (311) " 4" (273) (281) " (297) " (170) 6 1 4" (159) " (129) " (144) 4 3 4" (121) MF) 8 1 4" (210) 7 7 8" (200) 6 3 4" (171) 7 3 8" (187) 2 5 8" (67) A (EF) " (135) 3 3 8" 4 (86) 7 8" (124) " 3 (71) 16" (214) 2 1 2" (64) C 1 H (CMF) H (EF) 3 4" (95) 3 4" (70) E (CMF) E (EF) W 8 OPENING/PLENUM 1 4" (210) 7 7 8" (200) PLENUM 6 WIDTH 3 4" (171) 7 3 8" (187) 3" (76) 2 5 8" (67) 4 3 8" (111) 3 3 8" (86) " 16" (87) (71) 16" (214) 2 1 2" (64) 2 3 4" (70) 16" (52) 2" (51) " (371) " (262) " (332) 14 5 WIDTH 8" (371) 13 (SM)* 11 16" 14 (348) 1 4" (262) (LI) " 4" (324) (332) " (348) " (324) TSIDE DIMENSION OF 8 11 FIELD 16" (221) BUILT 8 PLENUM 1 4" (210) WITH 7 HEMMED 1 16" (179) EDGES " 5 IF 16" NO (195) (110) PLENUM IS 36 USED, 73 4" 8" (171) (99) OPENING 2 3 WIDTH 4" (70) MAY BE ADDITIONALLY 3 3 8" (86) REDUCED 2 BY 7 16" UP (62) TO 1/ 4" (6). " (43) 1 1 * OPENING FACE OVERALL FACE " 3 WIDTH FACE OVERALL LENGTH IS OVERALL (160) 5 7 8" (149) 4 3 4" (121) 5 3 8" (137) " (113) 16" ENSIONS (59) 2 ( 1 4" ) ARE (57) SOFT CONVERTED. 8" (35) 1 13 OUTSIDE LENGTH LENGTH DIMENSION 2" (38) IMPERIAL 16" (46) 1 3 OF FIELD BUILT FACE PLENUM OVERALL FACE FACE OVERALL WITH LENGTH OVERALL HEMMED LENGTH LENGTH CUSTOMER: EDGES. IF NO PLENUM FACE IS USED, OVERALL FACE OPENING FACE OVERALL LENGTH OVERALL LENGTH WIDTH LENGTH MAY BE ADDITIONALLY REDUCED FACE OVERALL FACE BY FACE OVERALL LENGTH UP OVERALL TO DIMENSIONS 4" (44) 1/ LENGTH 4" (6). LENGTH ALL METRIC DIMENSIONS ( ) ARE SOFT ARE 6 CONVERTED " (170) TO IMPERIAL METRIC 6 1 4" (159) DIMENSIONS AND ROUNDED " ARE (129) TO CONVERTED THE NEAREST 5 11 TO 16" METRIC MILLIMETER. (144) AND ROUNDED 4 3 4" (121) TO THE NEAREST MILLIMETER " (271) " (260) " (230) " (246) 8 3 4" (222) PROJECT: 7 4" (184) 6 7 8" (175) 5 3 4" (146) " 16" (162) (135) " 8" (124) (164) 3 3 4" (95) 4 3 8" (111) " (87) 16" " (49) (65) " 4" (64) (44) 1 7 8" (48) " (52) 2" (51) SUBMITTAL DATE: " (321) " (311) " (281) " 16" (297) (221) " 4" (210) (273) " (179) " (195) 6 3 4" (171) 8 1 4" (210) 7 7 8" (200) 6 3 4" (171) " 5 (187) 6 16" (214) 16" (71) 2 3 4" (70) 16" (160) 5 7 8" (149) 4 3 4" (121) 5 3 8" (137) " (56) " 8" (60) (371) " 16" (59) 16" (113) 2" (51) 2 1 (262) " (332) 4" (57) Copyright PRICE INDUSTRIES " (348) " (324) ITH HEMMED EDGES. IF NO PLENUM IS USED, OPENING WIDTH MAY BE ADDITIONALLY 16" (271) 10 1 REDUCED BY UP TO (260) 9 1 1/ 4" (6). 16" (230) " (246) 8 CF 3 4" (222) L DIMENSIONS ARE CONVERTED TO METRIC AND ROUNDED TO THE NEAREST MILLIMETER " (184) 6 7 8" (175) 5 3 4" (146) 6 3 8" (162) " (164) ENGINEER: (60) 2 1 4" (57) 2 7 8" (73) " (65) 2 1 2" (64) " (321) " (311) " (281) " (297) " (273) CUSTOMER: LINEAR SLOT DIFFUSER 1 4" (210) 7 7 8" (200) 6 3 4" (171) 7 3 8" (187) (67) 3 3 8" (86) " (71) 16" (214) 2 1 2" (64) 2 3 4" (70) " (371) " (262) " (332) " (348) " (324) E E: DIMENSION SUBMITTAL OF FIELD BUILT PLENUM SPEC. DATE: WITH SYMBOL: HEMMED EDGES. IF NO PLENUM SPEC. IS USED, CF SYMBOL: OPENING WIDTH MAY BE ADDITIONALLY REDUCED BY UP TO 2017/12/04 1/ 4" (6). 2017/12/04 ONS ( ) ARE SOFT CONVERTED. IMPERIAL DIMENSIONS ARE CONVERTED METRIC AND ROUNDED TO THE NEAREST MILLIMETER. STRIES 2017 Copyright PRICE INDUSTRIES LINEAR SLOT DIFFUSER SHEET FOR SPLICING FOR 1 FOR SPLICING OF TOGETHER FOR SPLICING 3 TOGETHER MULTIPLE TOGETHER REV MULTIPLE SECTIONS MULTIPLE 0 SECTIONS SHEET SECTIONS 1CF-1-1 OF 3 REV 0 YMBOL: W - FLANGED END (EF ONLY) X - MITRED END Y - OPEN END Z - FLUSH END FACE 2017/12/04 OVERALL FACE FACE OVERALL LENGTH OVERALL LENGTH LENGTH PATTERN PATTERN PATTERN CONTROLLER CONTROLLER ADJUSTMENTS: ADJUSTMENTS: END CONDITION END END CONDITION CONDITION CMF (SM) CMF CMF (SM) SHEET (SM) 1EF OF (SM) 3EF (SM) EF EF REV (SM) 0 EF (LI) EF CF-1-1 (LI) EF EF (LI) (LI) CF WW WW WW NOM. NOM. + 1 NOM. 1 16" + 1 (27) " 1 1 (27) 1 16" NOM. 16" (27) NOM. + 1 NOM. 1 4" + (32) " 1 1 (32) 1 4" 4" NOM. (32) NOM " NOM. (6) - 1 4" - 1 -(6) 1 4" 4" (6) (6) FULLY FULLY OPEN: FULLY OPEN: CUSTOM OPEN: FLOW LINEAR SLOT DIFFUSER WX WX WX WX NOM. NOM. + 1 NOM. 1 16" + 1 (27) " 1 1 (27) 1 16" NOM. 16" (27) NOM NOM. 16" + (24) " (24) 16" 16" NOM. (24) NOM " NOM. (6) - 1 4" - 1 -(6) 1 4" 4" (6) (6) Solid Edge APPLICATION: A S C E CEILING OPENING = NOM. LENGTH SM - SURFACE MOUNT DRYWALL APPLICATION EF - EXPOSED FRAME CEILING MODULE = NOM. LENGTH CEILING OPENING W = NOM. LENGTH E C A S C 2" (51) " (56) 2" (51) 2 3 8" (60) " (59) 2 1 4" (57 XPOSED E FRAME E 5/8" (16) OR 1/2" (13) DRYWALL 5/8" (16) OR 1/2" (13) DRYWALL CONCEALED MUD MP-DR FRAME - REVERSIBLE CMF - DRYWALL CONCEALED MUD C - FRAME CONCEALED A COUNTERSUNK MOUNTING BRACKET HOLES HB - HANGER BRACKETS (SM ONLY) MOUNTING CLIP MP-DR REVERSIBLE (SM ONLY) (CMF ONLY) DRYWALL A - COUNTERSUNK 1 (SM ONLY) 2 1 2" (64) MOUNTING HOLES 2 3 8" (60) (LI ONLY) BRACKET 2 1 4" (57) HB - 2 HANGER 7 8" (73) BRACKETS " (65) 2 1 2" (64 G/PLENUM WIDTH MP-DR - REVERSIBLE A - COUNTERSUNK C - CONCEALED (CMF ONLY) 2 MOUNTING Submittal HB - HANGER Sheet Sheet (LI ONLY) W (SM ONLY) MOUNTING CLIP (SM ONLY) DRYWALL MOUNTING HOLES (CMF ONLY) (SM ONLY) 1 SLOT SIZE DRYWALL SCREWS OPENING/PLENUM PLENUM WIDTH A (CMF) A (EF) (BY SLOT OTHERS) CQTY. A H (CMF) A H (EF) E C(CMF) H (CMF) E (EF) H (EF) 3" W (76) BRACKET (SM OPENING/PLENUM PLENUM WIDTH E (CMF) (S) WIDTH 2 E (EF) 2 ONLY) BRACKETS (LI ONLY) CLIP (SM ONLY) 5 8" (67) 2 1 W 2" (64) 3 3 8" (86) " (71) 2 3 4" (70 DRYWALL CF SCREWS CF - CF CUSTOM - FLOW (SM)* (LI) WIDTH (SM)* (LI) " (110) 3 7 8" (99) 2 3 4" (70) 3 3 8" (86) 7 16" (62) " (43) 1 1 2" (38) 1 3 H (BY OTHERS) * OPENING 1 8" (35) 13 (46) WIDTH IS 4" (44) 16" (110) 3 7 OUTSIDE DIMENSION 8" (99) 2 3 OF FIELD 4" (70) 3 3 BUILT PLENUM 1" (25) 8" (86) 2 7 WITH HEMMED EDGES 16" (62) D END CONDITIONS: END CONDITIONS: " (43) 1 1 2" (38) 1 3 8" (35) " (46) 1 3 4" (44) " (170) 6 1 4" (159) " (129) 6 11 ALL 16" (170) 5 METRIC 11 16" 6 (144) 1 DIMENSIONS 4" (159) ( ) 16" 4" (121) (129) ARE SOFT 5 11 CONVERTED. 16" (144) IMPERIAL 4 3 4" (121) DIMENSIONS ARE C " (135) 4 7 8" (124) 3 3 4" (95) 4 3 8" (111) 7 16" 15 (87) C 16" (49) 1 3 4" (44) " (48) (52) 2" (51) 16" (135) 4 7 8" (124) 3 3 4" (95) " (38) 8" (111) " (87) " (49) 1 3 4" (44) 1 7 8" (48) " (52) PROJECT: 2" (51) W End - FLANGED W A - W COUNTERSUNK FLANGED W Conditions FLANGED END2 END HOLES END X - HB MITRED - 8 X HANGER 11 - X 16" MITRED X -(221) - END MITRED BRACKETS END 8 1 END 4" (210) " (179) " Y - (221) OPEN 7 Y 11-16" Y OPEN 8 Y END -(195) 1 - OPEN 4" (210) END END " 4" (171) (179) 7 11 Z 16" - (195) FLUSH Z - Z FLUSH Z - END - FLUSH 6 3 END 4" END (171) E (EF ONLY) (EF ONLY) (CMF (EF (EF ONLY) " (LI ONLY) (160) 5 7 8" (149) 4 3 4" (121) 5 3 8" (137) " (56) " (60) 5 7 (59) 16" (113) CEALED MUD 2" FRAME " (57) 16" (160) 5 7 8" (149) 4 3 4" (121) 5 3 2" (51) 8" (137) " (56) 2" (51) 2 2 A - COUNTERSUNK 3 8" (60) " (59) " (271) HOLES 1 4" (57) " (260) " (230) " HB (271) 9-11 HANGER 16" 10 (246) 1 4" (260) BRACKETS " 4" (222) (230) " (246) 6 3 8" (162) WY WY WY WYNOM. NOM. + SPEC. 9 16" NOM. + (14) + SYMBOL: 9 16" + 9 (14) 9 16" 16" NOM. (14) NOM " NOM. (16) + 5 8" (16) 5 8" 8" (16) NOM. NOM " NOM. (3) - 1 8" /12/04 1 (3) 1 8" 8" (3) (3) WZ WZ WZ WZNOM. NOM " NOM. + (8) 5 16" (8) 5 16" 16" NOM. (8) (8) NOM " NOM. (10) + 3 8" (10) 3 8" 8" (10) NOM. NOM " NOM. (6) - 1 4" - 1 -(6) 1 4" 4" (6) (6) IES SHEET 1PARTIALLY OF PARTIALLY 3 PARTIALLY REVDAMPERED: 0 XX XX XXNOM. NOM. + 1 NOM CF " (27) 1 16" 1 (27) 1 16" NOM. 16" (27) NOM NOM. 16" + (17) " (17) 16" 16" NOM. (17) NOM " NOM. (6) - 1 4" - 1 -(6) 1 4" 4" (6) (6) W Solid Edge CF LINEAR SLOT DIFFUSER Solid Edge CEILING H OPENING = NOM. LENGTH CEILING MODULE = NOM. LENGTH JS - JET SLOT RT - RETURN FRAME STYLE: MOUNTING: SM MOUNTING: - SURFACE MOUNT APPLICATION: CEILING OPENING DRYWALL H APPLICATION H OPENING/PLENUM WIDTH OPENING/PLENUM WIDTH CEILING FRAMING = NOM. LENGTH CEILING FRAMING W W (BY OTHERS) (BY OTHERS) SM - SURFACE MOUNT CEILING MODULE DRYWALL APPLICATION = NOM. LENGTH A S C A S C H SCREWS E H SCREWS 2 SLOT (BY OTHERS) CEILING MODULE LI - TEE BAR LAY-IN (BY OTHERS) E = NOM. LENGTH APPLICATION EF - EXPOSED FRAME CMF CMF - CONCEALED - MOUNTING MUD FRAME 2 SLOT LI - TEE BAR LAY-IN C A S C (SM ONLY) APPLICATION E E MOUNTING: - EXPOSED Mounting FRAME EF - EXPOSED FRAME 5/8" (16) OR 1/2" (13) DRYWALL G/PLENUM WIDTH MOUNTING: SLOT SIZE 5/8" (16) OR 1/2" (13) DRYWALL CEILING FRAMING W MP-DR (BY OTHERS) SLOT QTY. A (CMF) A (EF) C H (CMF) H (EF) - REVERSIBLE DRYWALL MP-DR (S) - C REVERSIBLE - CONCEALED DRYWALL MOUNTING BRACKET C - CONCEALED MOUNTING BRACKET OPENING/PLENUM WIDTH CEILING FRAMING OPENING/PLENUM WIDTH W (BY OTHERS) MOUNTING CLIP (SM ONLY) W MOUNTING CLIP (SM ONLY) 1 (SM ONLY) (SM ONLY) 1" (25) " (43) 1 1 2" (38) 1 3 8" (35) " (46) 1 3 4" (44 H SCREWS 2 SCREWS (BY OTHERS) DRYWALL SCREWS DRYWALL SCREWS (BY OTHERS) H (BY OTHERS) H (BY OTHERS) " (38) " (49) 1 3 4" (44) 1 7 8" (48) " (52) 2" (51) 2 C 1 2 XY XY XY XYNOM. NOM " NOM. + (14) 9 16" (14) 9 16" 16" NOM. (14) NOM " NOM. (10) + 3 8" (10) 3 8" 8" (10) NOM. NOM " NOM. (3) - 1 8" - 1 -(3) 1 8" 8" (3) (3) XZ XZ XZ XZ NOM. NOM " NOM. + (8) 5 16" (8) 5 16" 16" NOM. (8) (8) NOM " NOM. (3) + 1 8" (3) 1 8" 8" (3) NOM. (3) NOM " NOM. (6) - 1 4" - 1 -(6) 1 4" 4" (6) (6) YY6 YY YY YY NOM. NOM. LENGTH NOM. LENGTH LENGTH NOM. NOM. LENGTH NOM. LENGTH LENGTH NOM. NOM. LENGTH NOM. LENGTH LENGTH SHUTOFF: SHUTOFF: SHUTOFF: For more information visit YZ YZ YZ YZ NOM. NOM " NOM. (6) - 1 4" - 1 -(6) 1 4" 4" (6) NOM. (6) NOM " NOM. (6) - 1 4" - 1 -(6) 1 4" 4" (6) NOM. (6) NOM " NOM. (3) - 1 8" - 1 -(3) 1 8" 8" (3) (3) " (113) 8 3 4" (222) " (164) " (273) SPEC. SYMBOL: CF-1-1 Solid Edge
7 CURVED LINEAR SLOT DIFFUSER (CFC) ++ Curved Custom Flow diffusers are available in flat-in-plane, concave or convex curves for supply or return applications making them ideal for highly architectural projects. ++ With fully adjustable pattern controllers, airflow adjustment remains flexible, even after curving. ++ Factory built plenums are an available option, built to suit the curvature of the diffuser, minimizing complications due to custom field fabrication and mounting. Flat curve For more information visit Convex curve Concave curve 7
8 PLENUMS (CFP) + + Price offers factory built and tested plenum assemblies in various sizes and configurations. To ensure on-site performance matches published performance data, factory built plenums are necessary. + + Optional fiberglass or fiber free foam plenum insulation is available. Curved plenum CONSTRUCTION + + Style Straight Curved + + Length 24 in in. + + Mounting Type Surface mount T-bar lay-in + + Insulation Fiberglass Fiber free foam + + Options Cable operated damper (VCR8EC) Optional cable operated damper 8 For more information visit
9 MODULAR CUSTOM FLOW DIFFUSER (ASM) + + Adjusta-slot Modular 4-sided single slot diffuser provides a unique architectural look and allows a matching ceiling tile to be used on the interior of the diffuser for visual consistency within the space. + + ASM diffusers are designed for most Lay-in suspension systems with a nominal module size of 24 in. x 24 in. and a 1 in. slot. + + Each slot can be field adjusted from the face of the diffuser to provide horizontal or vertical air patterns. CONSTRUCTION + + Application Supply Return + + Size 24 in. x 24 in. + + Mounting T-bar Bolt slot + + Options Insulated plenum For more information visit 9
10 AS with Pressurized Ceiling Plenum (Non-Ducted) Flow Rate (cfm/ft) Static Pressure (in. w.g.) Sound (NC) Throw (ft) Flow Rate (cfm/ft) Static Pressure (in. w.g.) Sound (NC) Throw (ft) Flow Rate (cfm/ft) Static Pressure (in. w.g.) Sound (NC) Throw (ft) Flow Rate (cfm/ft) Static Pressure (in. w.g.) Sound (NC) Throw (ft) Flow Rate (cfm/ft) Static Pressure (in. w.g.) Sound (NC) Throw (ft) Flow Rate (cfm/ft) Static Pressure (in. w.g.) Sound (NC) Throw (ft) Flow Rate (cfm/ft) Static Pressure (in. w.g.) Sound (NC) Throw (ft) Flow Rate (cfm/ft) Static Pressure (in. w.g.) Sound (NC) Throw (ft) Flow Rate (cfm/ft) Static Pressure (in. w.g.) Sound (NC) Throw (ft) Flow Rate (cfm/ft) Static Pressure (in. w.g.) Sound (NC) Throw (ft) Performance Notes: 1. Testing in accordance with ASHRAE Standard Method of Testing for Rating the Performance of Air Outlets and s. 2. Data is based on pressurized ceiling plenum application with no plenum effect for pressure or sound. 3. All pressures are in in. w.g. 4. Throw values are measured in feet for terminal velocities of 150 fpm (minimum), 100 fpm (middle) and 50 fpm (maximum). 5. Throw data is based on active sections 4 ft long. For other lengths refer to Table A. 6. Throw data is based on supply air and room air being at isothermal conditions. 7. Throw values are based on 1 way air pattern. For 2 way pattern, throw is determined from the 1-slot data at 1/2 the specified air volume. 8. NC values are based on a room absorption of 10 db, re watts, for a 4 ft section. For other lengths refer to Table B. 9. For supply units used as a return add 3 NC. 10. Blanks - indicate an NC level below 15. Table A. Throw Correction Multiplier for Length Length, ft Throw Correction Table B. NC Correction for Length Length, ft Supply Return For more information visit
11 24 Length 1 AS with Engineered Plenum (CFP) Flow Rate (cfm) Total Pressure (in. w.g.) Static Pressure (in. w.g.) Sound (NC) Throw (ft) Flow Rate (cfm) Total Pressure (in. w.g.) Static Pressure (in. w.g.) Sound (NC) Throw (ft) Flow Rate (cfm) Total Pressure (in. w.g.) Static Pressure (in. w.g.) Sound (NC) Throw (ft) Flow Rate (cfm) Total Pressure (in. w.g.) Static Pressure (in. w.g.) Sound (NC) Throw (ft) Flow Rate (cfm) Total Pressure (in. w.g.) Static Pressure (in. w.g.) Sound (NC) Throw (ft) Flow Rate (cfm) Total Pressure (in. w.g.) Static Pressure (in. w.g.) Sound (NC) Throw (ft) Flow Rate (cfm) Total Pressure (in. w.g.) Static Pressure (in. w.g.) Sound (NC) Throw (ft) Flow Rate (cfm) Total Pressure (in. w.g.) Static Pressure (in. w.g.) Sound (NC) Throw (ft) Flow Rate (cfm) Total Pressure (in. w.g.) Static Pressure (in. w.g.) Sound (NC) Throw (ft) Flow Rate (cfm) Total Pressure (in. w.g.) Static Pressure (in. w.g.) Sound (NC) Throw (ft) Flow Rate (cfm) Total Pressure (in. w.g.) Static Pressure (in. w.g.) Sound (NC) Throw (ft) Flow Rate (cfm) Total Pressure (in. w.g.) Static Pressure (in. w.g.) Sound (NC) Throw (ft) For performance notes, see end of section Flow Rate (cfm) Total Pressure (in. w.g.) Static Pressure (in. w.g.) Sound (NC) Throw (ft) For more information visit 11
12 48 Length 1 AS with Engineered Plenum (CFP) Flow Rate (cfm) Total Pressure (in. w.g.) Static Pressure (in. w.g.) Sound (NC) Throw (ft) Flow Rate (cfm) Total Pressure (in. w.g.) Static Pressure (in. w.g.) Sound (NC) Throw (ft) Flow Rate (cfm) Total Pressure (in. w.g.) Static Pressure (in. w.g.) Sound (NC) Throw (ft) Flow Rate (cfm) Total Pressure (in. w.g.) Static Pressure (in. w.g.) Sound (NC) Throw (ft) Flow Rate (cfm) Total Pressure (in. w.g.) Static Pressure (in. w.g.) Sound (NC) Throw (ft) Flow Rate (cfm) Total Pressure (in. w.g.) Static Pressure (in. w.g.) Sound (NC) Throw (ft) Flow Rate (cfm) Total Pressure (in. w.g.) Static Pressure (in. w.g.) Sound (NC) Throw (ft) Flow Rate (cfm) Total Pressure (in. w.g.) Static Pressure (in. w.g.) Sound (NC) Throw (ft) Flow Rate (cfm) Total Pressure (in. w.g.) Static Pressure (in. w.g.) Sound (NC) Throw (ft) Flow Rate (cfm) Total Pressure (in. w.g.) Static Pressure (in. w.g.) Sound (NC) Throw (ft) Flow Rate (cfm) Total Pressure (in. w.g.) Static Pressure (in. w.g.) Sound (NC) Throw (ft) Flow Rate (cfm) Total Pressure (in. w.g.) Static Pressure (in. w.g.) Sound (NC) Throw (ft) For performance notes, see end of section Flow Rate (cfm) Total Pressure (in. w.g.) Static Pressure (in. w.g.) Sound (NC) Throw (ft) For more information visit
13 60 Length 1 AS with Engineered Plenum (CFP) Flow Rate (cfm) Total Pressure (in. w.g.) Static Pressure (in. w.g.) Sound (NC) Throw (ft) Flow Rate (cfm) Total Pressure (in. w.g.) Static Pressure (in. w.g.) Sound (NC) Throw (ft) Flow Rate (cfm) Total Pressure (in. w.g.) Static Pressure (in. w.g.) Sound (NC) Throw (ft) Flow Rate (cfm) Total Pressure (in. w.g.) Static Pressure (in. w.g.) Sound (NC) Throw (ft) Flow Rate (cfm) Total Pressure (in. w.g.) Static Pressure (in. w.g.) Sound (NC) Throw (ft) Flow Rate (cfm) Total Pressure (in. w.g.) Static Pressure (in. w.g.) Sound (NC) Throw (ft) Flow Rate (cfm) Total Pressure (in. w.g.) Static Pressure (in. w.g.) Sound (NC) Throw (ft) Flow Rate (cfm) Total Pressure (in. w.g.) Static Pressure (in. w.g.) Sound (NC) Throw (ft) Flow Rate (cfm) Total Pressure (in. w.g.) Static Pressure (in. w.g.) Sound (NC) Throw (ft) Flow Rate (cfm) Total Pressure (in. w.g.) Static Pressure (in. w.g.) Sound (NC) Throw (ft) Flow Rate (cfm) Total Pressure (in. w.g.) Static Pressure (in. w.g.) Sound (NC) Throw (ft) Flow Rate (cfm) Total Pressure (in. w.g.) Static Pressure (in. w.g.) Sound (NC) Throw (ft) For performance notes, see end of section Flow Rate (cfm) Total Pressure (in. w.g.) Static Pressure (in. w.g.) Sound (NC) Throw (ft) For more information visit 13
14 24 Length 2 AS with Engineered Plenum (CFP) Flow Rate (cfm) Total Pressure (in. w.g.) Static Pressure (in. w.g.) Sound (NC) Throw (ft) Flow Rate (cfm) Total Pressure (in. w.g.) Static Pressure (in. w.g.) Sound (NC) Throw (ft) Flow Rate (cfm) Total Pressure (in. w.g.) Static Pressure (in. w.g.) Sound (NC) Throw (ft) Flow Rate (cfm) Total Pressure (in. w.g.) Static Pressure (in. w.g.) Sound (NC) Throw (ft) Flow Rate (cfm) Total Pressure (in. w.g.) Static Pressure (in. w.g.) Sound (NC) Throw (ft) Flow Rate (cfm) Total Pressure (in. w.g.) Static Pressure (in. w.g.) Sound (NC) Throw (ft) Flow Rate (cfm) Total Pressure (in. w.g.) Static Pressure (in. w.g.) Sound (NC) Throw (ft) Flow Rate (cfm) Total Pressure (in. w.g.) Static Pressure (in. w.g.) Sound (NC) Throw (ft) Flow Rate (cfm) Total Pressure (in. w.g.) Static Pressure (in. w.g.) Sound (NC) Throw (ft) Flow Rate (cfm) Total Pressure (in. w.g.) Static Pressure (in. w.g.) Sound (NC) Throw (ft) Flow Rate (cfm) Total Pressure (in. w.g.) Static Pressure (in. w.g.) Sound (NC) Throw (ft) Flow Rate (cfm) Total Pressure (in. w.g.) Static Pressure (in. w.g.) Sound (NC) Throw (ft) For performance notes, see end of section Flow Rate (cfm) Total Pressure (in. w.g.) Static Pressure (in. w.g.) Sound (NC) Throw (ft) For more information visit
15 48 Length 2 AS with Engineered Plenum (CFP) Flow Rate (cfm) Total Pressure (in. w.g.) Static Pressure (in. w.g.) Sound (NC) Throw (ft) Flow Rate (cfm) Total Pressure (in. w.g.) Static Pressure (in. w.g.) Sound (NC) Throw (ft) Flow Rate (cfm) Total Pressure (in. w.g.) Static Pressure (in. w.g.) Sound (NC) Throw (ft) Flow Rate (cfm) Total Pressure (in. w.g.) Static Pressure (in. w.g.) Sound (NC) Throw (ft) Flow Rate (cfm) Total Pressure (in. w.g.) Static Pressure (in. w.g.) Sound (NC) Throw (ft) Flow Rate (cfm) Total Pressure (in. w.g.) Static Pressure (in. w.g.) Sound (NC) Throw (ft) Flow Rate (cfm) Total Pressure (in. w.g.) Static Pressure (in. w.g.) Sound (NC) Throw (ft) Flow Rate (cfm) Total Pressure (in. w.g.) Static Pressure (in. w.g.) Sound (NC) Throw (ft) Flow Rate (cfm) Total Pressure (in. w.g.) Static Pressure (in. w.g.) Sound (NC) Throw (ft) Flow Rate (cfm) Total Pressure (in. w.g.) Static Pressure (in. w.g.) Sound (NC) Throw (ft) Flow Rate (cfm) Total Pressure (in. w.g.) Static Pressure (in. w.g.) Sound (NC) Throw (ft) Flow Rate (cfm) Total Pressure (in. w.g.) Static Pressure (in. w.g.) Sound (NC) Throw (ft) For performance notes, see end of section Flow Rate (cfm) Total Pressure (in. w.g.) Static Pressure (in. w.g.) Sound (NC) Throw (ft) For more information visit 15
16 60 Length 2 AS with Engineered Plenum (CFP) Flow Rate (cfm) Total Pressure (in. w.g.) Static Pressure (in. w.g.) Sound (NC) Throw (ft) Flow Rate (cfm) Total Pressure (in. w.g.) Static Pressure (in. w.g.) Sound (NC) Throw (ft) Flow Rate (cfm) Total Pressure (in. w.g.) Static Pressure (in. w.g.) Sound (NC) Throw (ft) Flow Rate (cfm) Total Pressure (in. w.g.) Static Pressure (in. w.g.) Sound (NC) Throw (ft) Flow Rate (cfm) Total Pressure (in. w.g.) Static Pressure (in. w.g.) Sound (NC) Throw (ft) Flow Rate (cfm) Total Pressure (in. w.g.) Static Pressure (in. w.g.) Sound (NC) Throw (ft) Flow Rate (cfm) Total Pressure (in. w.g.) Static Pressure (in. w.g.) Sound (NC) Throw (ft) Flow Rate (cfm) Total Pressure (in. w.g.) Static Pressure (in. w.g.) Sound (NC) Throw (ft) Flow Rate (cfm) Total Pressure (in. w.g.) Static Pressure (in. w.g.) Sound (NC) Throw (ft) Flow Rate (cfm) Total Pressure (in. w.g.) Static Pressure (in. w.g.) Sound (NC) Throw (ft) Flow Rate (cfm) Total Pressure (in. w.g.) Static Pressure (in. w.g.) Sound (NC) Throw (ft) Flow Rate (cfm) Total Pressure (in. w.g.) Static Pressure (in. w.g.) Sound (NC) Throw (ft) Flow Rate (cfm) Total Pressure (in. w.g.) Static Pressure (in. w.g.) Sound (NC) Throw (ft) Performance Notes: 1. Testing in accordance with ASHRAE Standard Method of Testing for Rating the Performance of Air Outlets and s. 2. Data is based on Adjusta-slot complete with Price Engineered Plenums (insulated) as a composite assembly. 3. Plenums not provided by Price may demonstrate performance variations from data published by Price. Price cannot guarantee performance if a factory engineered plenum is not provided. 4. All pressures are in in. w.g. 5. Throw values are measured in feet for terminal velocities of 150 fpm (minimum), 100 fpm (middle) and 50 fpm (maximum). 6. Throw data is based on supply air and room air being at isothermal conditions. 7. Throw values are based on 1-way air pattern. For 2-way pattern, throw is determined from the 1-slot data at ½ the specified air volume. 8. NC values are based on a room absorption of 10 db re watts and one diffuser. 9. Blanks - indicate an NC level below For more information visit
17 1 ASM with 1 in. 1 in. 1 in. 1 in. dia dia. dia. Neck Velocity, fpm Velocity Pressure, in. w.g Flow Rate (cfm) Total Pressure (in. w.g.) Sound (NC) Throw (ft) Flow Rate (cfm) Total Pressure (in. w.g.) Sound (NC) Throw (ft) Flow Rate (cfm) Total Pressure (in. w.g.) Sound (NC) Throw (ft) Performance Notes: 1. Testing in accordance with ASHRAE Standard Method of Testing for Rating the Performance of Air Outlets and s. 2. All pressures are in in. w.g. 3. Throw values are measured in feet for terminal velocities of 150 fpm (minimum), 100 fpm (middle) and 50 fpm (maximum). 4. Throw data is based on supply air and room air being at isothermal conditions. 5. NC values are based on a room absorption of 10 db re watts. 6. Blanks - indicate an NC level below 15. For more information visit 17
RPD ROUND PLAQUE DIFFUSER
ROUND PLAQUE DIFFUSER s (RPD) provide a balance between engineering and architectural needs, with a flush appearance and superior VAV performance in both ceiling and exposed duct mounting applications.
More informationLINEAR SLOT DIFFUSERS PLENUMS
LINEAR SLOT DIFFUSER PLENUMS ADAPTORS FOR MODEL SERIES 5000 LINEAR SLOT CEILING DIFFUSERS Standard Models: 5350(I) 1/2" (13) Slot 5375(I) 3/4" (19) Slot 5310(I) 1" (25) Slot Modified Performance Models:
More informationLINEAR DIFFUSERS AND BAR GRILLES
LINEAR DIFFUSERS AND AR GRILLES GENERAL PRODUCT OVERVIEW Linear Diffusers and ar Grilles Linear type diffusers and grilles have been developed to satisfy architectural and engineering applications that
More informationLINEAR DIFFUSERS AND BAR GRILLES
LINEAR DIFFUSERS AND AR GRILLES LINEAR DIFFUSERS AND AR GRILLES LINEAR SLOT DIFFUSER PLENUMS FOR TECHZONE TYPE CEILINGS Model Series 5300TZ Plenums are designed to fit the 5000TZ Series Slot Diffusers.
More informationHORD HOSPITAL OPERATING ROOM AIR CURTAIN
HORD HOSPITAL OPERATING ROOM AIR CURTAIN The Hospital Operating Room Diffuser (HORD) air curtain system is engineered specifically for the demanding needs of operating room environments. The HORD air curtain
More informationK1-2. Table of Contents LINEAR BAR GRILLES 1500, 1500MC, 1800, 1800MC
K Table of Contents, This series of extruded aluminum supply and return linear bar grilles are for ceiling, sidewall, sill (), and floor () applications. Blade thickness is 7/32., This series of extruded
More informationLINEAR DIFFUSERS AND BAR GRILLES
49-240 48LL1 49-280 49-480 48LL2 Linear ar Grilles The Nailor 4900 Series provides an extruded aluminum bar grille that offers beautiful styling and efficient performance. Linear bar grilles offer a choice
More informationHORD HOSPITAL OPERATING ROOM AIR CURTAIN
HORD HOSPITAL OPERATING ROOM AIR CURTAIN The Hospital Operating Room Diffuser (HORD) air curtain system is engineered specifically for the demanding needs of operating room environments. The HORD air curtain
More informationISSUE B, OCT Architectural Square Ceiling Diffusers. UNI & AUNI Diffusers. Advanced Air
ISSUE B, OCT 2009 Architectural Square Ceiling Diffusers UNI & AUNI Diffusers Product Overview - Uni Series Architectural Ceiling Diffusers Uni Series High Performance Square Face Round Neck The Model
More informationEGG CRATE RETURN GRILLE
80 EGG CRATE RETURN GRILLE 80 The 80 Series is available in various mounting styles and features sturdy construction, consisting of a heavy gauge aluminum grid core, optional extruded aluminum borders
More informationMODULAR CORE CEILING DIFFUSERS
MOEL SQUARE 12345-10 MOULAR CORE SQUARE IFFUSERS ROUN NECK SQUARE 1, 2, 3 OR ROUN 4-WAY AJUSTABLE NECK SQUARE ISCHARGE ROUN PATTERN NECK Steel Model: 7500 Suffix '-O' adds a steel opposed blade damper
More informationfsfdfsdfsdfssfsf OMNI DIFFUSER
fsfdfsdfsdfssfsf OMNI DIFFUSER Architectural Ceiling Diffusers diffusers OMNI The Titus OMNI diffuser satisfies architectural as well as engineering criteria. Its strong, clean, unobtrusive lines harmonize
More informationSPD/SPDV SPD SPDV. High Velocity/High Aspiration Air Outlet. Construction
SPD/SPDV SPD O D-1/8 C Saturn Plaque Diffuser US Patent B H SPDV SPD Dimensions in Inches MODEL A B C D H O SPD-04 7-1/2 2 1-1/4 4 3-3/4 5-1/8 SPD-06 10 2 1-3/16 6 4 7-1/2 SPD-08 12 2 1-3/16 8 4 9-1/2
More informationSPD SQUARE PLAQUE DIFFUSER
SQUARE PLAQUE DIFFUSER The (SPD) has a flush appearance, making it ideal for architecturally-conscience commercial spaces, and provides industry-leading low pressure drop and sound generation with a 360
More informationPrice O.R. Systems AIR CURTAIN SYSTEM
Price O.R. Systems AIR CURTAIN SYSTEM The Price Air Curtain System includes non-aspirating laminar flow diffusers directly above the surgical area with a surrounding four-sided linear slot diffuser system
More informationFlowBar High Capacity Slot Diffuser
October 2016 FlowBar High Capacity Diffuser Model HT (High Throw) Model JT (Jet Throw) Features HT & JT 25mm, 38mm, 51mm, 63mm & 76mm s Ceiling or Sidewall Applications Modular or Continuous s Curved Sections
More informationGRILLES AND REGISTERS
RILLES AND REISTERS Models 45DL1, 45DL2 Models 813SH-O, 813DV Drum Louvers These extruded aluminum drum louvers are appropriate when high volumes of air are used and in spot heating and cooling applications.
More informationOptima EXHAUST GRILL AND AIR LOUVER. Perforated Ceiling Diffusers. Features: Standard square sizes:
Perforated Ceiling Diffusers OPTIMA ceiling diffuser with perforated face, are recoended for heating, ventilating and cooling in centralized air conditioning systems. Perforated face diffusers, with 4-3-
More informationDRUM LOUVERS DRUM LOUVERS 45DL SERIES. Models: 45DL1 Single Vanes 45DL2 Split Vanes G151 HIGH CAPACITY LONG THROW ALUMINUM CONSTRUCTION
DRUM LOUVERS 45DL SERIES HIH CAPACITY LON THROW ALUMINUM CONSTRUCTION Models: Single Vanes 45DL2 Split Vanes Suffix '-O' adds a steel opposed blade damper Models -O and 45DL2 Model Series 45DL Drum Louvers
More informationConcentric Supply/Return Diffusers. Models CSR & CSR-P. Redefine your comfort zone.
Concentric Supply/Return Diffusers Models CSR & CSR-P Redefine your comfort zone. www.titus-hvac.com Concentric Supply/Return Diffusers Models CSR & CSR-P Plenum CSR Rectangular Ceiling Diffuser Combination
More informationCatalogue. FlowBar. High Capacity Slot Diffuser.
Catalogue FlowBar High Capacity Slot Diffuser www.air-diffusion.co.uk sales@air-diffusion.co.uk Content Introduction... 4 Diffuser Specification... 5 Air Patterns... 6 Flange Styles... 7 Curved Sections...
More informationSECURITY PRODUCTS GENERAL PRODUCT OVERVIEW. Security Products
GENERAL PRODUCT OVERVIEW Security Products Nailor offers a complete line of Security Grilles, Registers and Diffusers. The product line includes grilles and registers for maximum, medium and minimum security
More informationEXTRUDED ALUMINUM LINEAR BAR GRILLES AND REGISTERS
SAUDI AIR CONTROL SYSTEM INDUSTRIAL REGISTRATION NO.353 EXTRUDED ALUMINUM LINEAR BAR GRILLES AND REGISTERS EXTRUDED ALUMINUM LINEAR BAR GRILLES AND REGISTERS SERIES GLG and GLR 1, 2, 3, 4/5,6,7,8,9,10.
More informationD1-2. Table of Contents MODULAR CORE DIFFUSERS. 1240, Introduction & Product Description... D1-3. Dimensional Information...
D Table of Contents, These supply, ceiling diffusers feature four handremovable modular cores. Available in steel or aluminum construction. P, P These supply, ceiling diffusers feature four handremovable
More informationCEILING DIFFUSERS CEILING DIFFUSERS
CEILING IFFUSERS "TWISTER" HIGH INUCTION STAMPE FACE The "Twister" diffuser is engineered to optimize air distribution effectiveness. This next generation diffuser has a high induction, 360 swirl pattern
More informationGRD PRODUCT CATALOG LINEAR DIFFUSERS & GRILLES
GRD PRODUCT CATALOG LINEAR DIFFUSERS & GRILLES The METALAIRE line of Linear Diffusers and Grilles is designed to satisfy the most discerning architect's design concept without compromising engineering
More informationCEILING DIFFUSERS CEILING DIFFUSERS
Model 4340M Model 4330CB Premium, Curved Blade Pattern Controllers The perforated diffusers in this series have an extruded aluminum frame with a narrow border that is visible within the T-Bar module.
More informationCEILING DIFFUSERS GENERAL PRODUCT OVERVIEW
CEILING IFFUSERS CEILING IFFUSERS GENERAL PROUCT OVERVIEW Ceiling iffusers Quality Assured Products, unobtrusive clean lines for appearance, careful engineering and professional workmanship with the backing
More informationfor Pleasant & Healthy Air-Distribution ISO 9001:2000 Linear Bar & Floor Grilles Product Bulletin 135-D
for Pleasant & Healthy Air-Distribution ISO 90012000 Product Bulletin 135-D Linear Bar & Floor Grilles Pleasant.. Serene.. YOU & DASCO... Since 1964 Partners for good health INTRODUCTION DASCO Linear Bar
More informationLinear Slot Diffusers Model Slot 20 & Model Slot 25
Model Slot & Model Slot 25 Contents Introduction!!!!!! Page 3 Di"user Specification!!!! Page 4 Air Patterns!!!!!! Page 5 Flange Styles!!!!!! Page 6 Corner Sections!!!!! Page 7 Selection Procedure!!!! Page
More informationCEILING DIFFUSERS GENERAL PRODUCT OVERVIEW
GENERAL PROUCT OVERVIEW Ceiling iffusers Quality Assured Products, unobtrusive clean lines for appearance, careful engineering and professional workmanship with the backing of an industry leader - these
More informationPATTERN CEILING DIFFUSERS
PATTERN CEILING IFFUSERS Model 4260 Model 7500 Eggcrate Return This aluminum face return diffuser features 1/2" x 1/2" x 1/2" (13 x 13 x 13) eggcrate that provides a high free area. It is offered with
More informationCEILING DIFFUSERS D12 CEILING DIFFUSERS
PREMIUM This perforated return has an extruded aluminum frame with a narrow border that is visible within the T-Bar module. See Model Series 4330 and 4330CB for the matching supply air diffusers. Flush
More informationLINEAR SLOT DIFFUSERS
LINEAR SLOT DIFFUSERS MODEL CD Weltech Business Centre - Ridgeway - Welwyn Garden City - Hertfordshire AL7 2AA Tel: 01707 871526 - Fax: 01707 871 527 - email sales@jprservices.co.uk - www.jprservices.co.uk
More informationDCG Adjustable Aluminum Round Diffusers
51 DCG Adjustable Aluminum Round Diffusers H V A C TM Rev 27-05-2018 52 DCG SEries Aluminum Adjustable Round Diffusers Adjust core up and down to move from horizontal to vertical airflow Architecturally
More informationSTEEL LOUVERED DIFFUSERS [CFM Range is only a guide. See Manufacturer Catalog for complete data. All NC Levels in Acceptable Range<32.
STEEL LOUVERED DIFFUSERS TUTTLE & BAILEY Model 1300 - Round Neck Steel, Lay-In Tee Bar Mounting Neck Size Panel Size CFM Range Price Each Volume Damper Model RBN *6 12 x 12 75-180 $19 $12 6 24 x 24 75-180
More informationEX C E L L E N C E ISO 9001 CERTIFIED COMPANY LINEAR BAR GRILLES.
25 YEARS OF EX C E L L E N C E ISO 9001 CERTIFIED COMPANY 3.0 INDEX ISO 9001 CERTIFIED COMPANY SECTION TOPIC PAGE 3.1 Double deflection linear bar grille ASLG 3 3.2 Double deflection linear bar register
More informationSquare/Rect. and Square Louvered Face and Plaque Face Diffuser
/Rect. and Louvered Face and Plaque Face Diffuser Series J: Easily Adjustable from Horizontal to Vertical Vertical Discharge Application: Carnes steel (SK) and aluminum (SE) louvered face diffusers are
More information6490, These perforated. ceiling returns feature a. square neck. Aluminum or steel perforated face. is available. 6600, 56600, 6600FR
C1 Table of Contents 1, 15 51, 515 supply ceiling diffusers feature a neck mounted rotatable core with either a round or square neck. Aluminum or steel perforated face is available. 2, 52 2FR, 2F supply,
More informationC O L M A N. Air Distribution LINEAR SLOT DIFFUSERS CD SERIES SERIES
C O L M A N Air Distribution E N G I N E E R E D A I R P R O D U C T S LINEAR SLOT DIFFUSERS CD SERIES CD SERIES LINEAR SLOT DIFFUSERS QUALITY AND EFFICIENCY WITHOUT COMPROMISE Application Colman Moducel
More informationPERFORATED CEILING DIFFUSERS
PERFORAE MOEL PERFORAE 12345-10 CEILING SQUARE IFFUSERS ROUN NECK SQUARE ROUN NECK SUPPLY SQUARE 1, 2, 3 OR ROUN 4-WAY AJUSABLE NECK ISCHARGE PAERN Steel Models: 4320 Flush Face 4325 rop Face Aluminum
More informationPERFORATED CEILING DIFFUSERS
PERFORAE PERFORAE CURVE MOEL BLAE 12345-10 IFFUSERS SQUARE ROUN NECK SQUARE SUPPLYROUN NECK 4-WAY AJUSABLE ISCHARGE SQUARE ROUN NECK PAERN (SANAR) 1, 2 OR 3-WAY ISCHARGE PAERN (OPIONAL) Steel Models: 4320CB
More informationcritical environment diffusers
FlowBar Critical Environment Diffusers Hard Diffusers Ceiling Table Applications of Contents 2 CRITICAL ENVIRONMENT DIFFUSERS Critical Environment Diffusers... 3 Applications... 3 General Clean Room Information...
More information6490, These perforated. ceiling returns feature a. square neck. Aluminum or steel perforated face. is available. 6600, 56600, 6600FR
C Table of Contents 6, 6 6, 6 supply ceiling diffusers feature a neck mounted rotatable core with either a round or square neck. Aluminum or steel perforated face is available. 62, 62 62FR, 629F supply,
More informationSERIES GSL. Linear Slot Diffuser
PUBLICATION DIFFUSERS 6 JANUARY 2017 Curved Linear Slot Diffuser Features - One to Eight Slot Widths. - Adjustable for Horizontal & Vertical Distribution. - Unique Multi Purpose Removable Air Deflection
More informationPhotographer: BRUCE T. MARTIN, LFD Laminar Flow Diffuser
Photographer: BRUCE T. MARTIN, 2011 LFD Laminar Flow Diffuser Typical Applications The LFD s non-aspirating, unidirectional, laminar flow air pattern is ideal for applications where a low velocity and
More informationMulticore diffusers. introduction. type control. options. finish. sizes SQUARE AND RECTANGULAR DIFFUSERS
SQUARE AND RECTANGULAR DIFFUSERS introduction The IC diffuser is a versatile form of air terminal offering the facility of multi directional throw patterns in a wide range of frame sizes. Each core style
More informationCEILING DIFFUSERS CEILING DIFFUSERS
CEILING IFFUSERS "TWISTER" HIGH INUCTION STAMPE FACE The "Twister" diffuser is engineered to optimize air distribution effectiveness. This next generation diffuser has a high induction, 360 swirl pattern
More informationC O L M A N. Air Distribution LINEAR SLOT DIFFUSERS CE SERIES SERIES
C O L M A N Air Distribution E N G I N E E R E D A I R P R O D U C T S LINEAR SLOT DIFFUSERS CE SERIES CE SERIES LINEAR SLOT DIFFUSERS CE SERIES QUALITY AND EFFICIENCY WITHOUT COMPROMISE Application Colman
More informationCEILING DIFFUSERS CEILING DIFFUSERS. Aluminum Construction Model 6300R See Page D135. Fully Adjustable Horizontal/Vertical Pattern
6 Model TWR "Twister" High Induction Stamped Face The "Twister" diffuser is engineered to optimize air distribution effectiveness. This next generation diffuser has a high induction, 360 swirl pattern
More informationCEILING DIFFUSERS CEILING DIFFUSERS
"TWISTER" HIGH INUCTION STAMPE FACE The "Twister" diffuser is engineered to optimize air distribution effectiveness. This next generation diffuser has a high induction, 360 swirl pattern for a superior
More informationINDEX. Chapter3. air master. Linear Bar Grilles
Chapter3 INDEX A Linear bar grilles: 1. Supply linear bar grille...: ASLG...3.1 2. Supply linear bar register...: ASLR...3.2 3. Return linear bar grille...: ARLG...3.3 4. Return linear bar register...:
More informationGRILLES AND REGISTERS
Curved Spiral Duct rilles Nailor s unique curved spiral duct grille design offers an architecturally superior appearance and saves installation time and money by directly mounting to the duct. This eliminates
More informationINDEX. Chapter1 1. A. Jet diffusers 1. Jet diffuser...: AJD-P
Chapter1 1 INDEX A. s 1....: AJD-P...11.1 Standard sizes...11.1 Fixing details...11.2 Panel arrangement...11.2 How to order...11.2 B. Air flow data 1. at o o position...: Tab: 11.1 (A)...11.3 2. at o position...:
More informationSECURITY PRODUCTS GENERAL PRODUCT OVERVIEW. Security Products
GENERAL PRODUCT OVERVIEW Security Products Nailor offers a complete line of Security Grilles, Registers and Diffusers. The product line includes grilles and registers for maximum, medium and minimum security
More informationLINEAR SLOT DUFFUSERS
LINEAR SLOT DUFFUSERS CE SERIES Quality and efficiency without compromise Weltech Business Centre - Ridgeway - Welwyn Garden City - Hertfordshire AL 2AA Tel: 010 12 - Fax: 010 1 2 - email sales@jprservices.co.uk
More informationLAMINAR FLOW DIFFUSER Model DLAB
Laminar & Radial Flow Diffuser LAMINAR FLOW DIFFUSER Model DLAB Application Laminar Flow diffusers are used to deliver air to surface directly underneath in a non-aspirating air pattern, with the minimum
More informationGRILLES AND REGISTERS
Airfoil Blade Return Air Models 71FH, 7145H 45 Deflection, 3/4" (19) Blade Spacing The airfoil blades are fixed at a 45 angle. This grille is vision proof when installed in a low or high sidewall location
More informationRedefine your comfort zone. chilled beams. energy solutions
integrated lighting u open ceiling k-12 education wood grains dual-function energy solutions Table of Contents CHILLED BEAM PRODCTS Chilled Beam Products...3 Overview...6 ACTIVE CHILLED BEAMS CBAL-24 /
More informationHIGH CAPACITY LINEAR SLOT DUFFUSERS
HIGH CAPACITY LINEAR SLOT DUFFUSERS CB SERIES Quality and efficiency without compromise Weltech Business Centre - Ridgeway - Welwyn Garden City - Hertfordshire AL7 2AA Tel: 01707 871526 - Fax: 01707 871
More informationCEILING DIFFUSERS GENERAL PRODUCT OVERVIEW
GENERAL PROUCT OVERVIEW Ceiling iffusers Quality Assured Products, unobtrusive clean lines for appearance, careful engineering and professional workmanship with the backing of an industry leader - these
More informationExtruded Aluminum Construction 1/4 Bars on 1/2 Centers Floor, Sidewall or Ceiling Mount Pencil Proof
OVERVIEW Linear Bar, Grilles and Registers OVERVIEW LINEAR BAR, GRILLES and REGISTERS Curtainaire Trimaire Varicore Extruded Aluminum Construction 1/4 Bars on 1/2 Centers Floor, Sidewall or Ceiling Mount
More informationSERIES HSL. High Capacity Linear
High Capacity Linear PUBLICATION Slot Diffuser DIFFUSERS 20 NOVEMBER 2016 Features - High Capacity One and Two Slot Widths. - Adjustable for Horizontal & Vertical Distribution. - Removable Air Deflection
More informationGRILLES AND REGISTERS
RILLES AND REISERS CURVED SPIRAL DUC RILLES Nailor s unique curved spiral duct grille design offers an architecturally superior appearance and saves installation time and money by directly mounting to
More informationGRD PRODUCT CATALOG DISPLACEMENT VENTILATION PRODUCTS
GRD PRODUCT CATALOG PRODUCTS 2018 Metal Industries, Inc. PRODUCTS Displacement Ventilation systems provide conditioned air at floor level at very low velocity and allow heat sources within the room (like
More informationApplication Guidelines
Grilles and Registers Application Guidelines Introduction Overview It is the intent of this section to give some basic application guidelines for the use of supply and return grilles and registers in a
More informationIncorporating V2.0. Product spec >>> > Series DJ - Drum jet diffusers
Incorporating V2.0 Product spec >>> > Series DJ - Drum jet diffusers Diffusers Drum jets (Premium) Recommended for: Wall, ceiling & duct Supply Overview Exceptional throw Throw completely adjustable Drum
More information500-YCI SERIES FAN-POWERED AIR TERMINAL UNIT FORM EG2 (404)
500-YCI SERIES FAN-POWERED AIR TERMINAL UNIT Table of Contents General Information...3 500-YCI Features...4-5 Dimensional Data...6-7 ARI Rating Points...8 Statement of Standard Test Conformity...8 Motor
More informationIN STAL LA TION IN STRUC TIONS FOR CON CEN TRIC DIF FUSER
IN STAL LA TION IN STRUC TIONS FOR CON CEN TRIC DIF FUSER UNIT FILTER PLENUM CONTROL MOTOR ECONOMIZER FRESH AIR EXHAUST AIR ROOF CURB FLEXIBLE DUCT CON CEN TRIC DIFFUSER BOX Concentric Diffuser Flush Mount
More informationGRILLES AND REGISTERS
Heavy Duty Steel rilles and Registers, ymnasium Strength Nailor s Heavy Duty Steel rilles and Registers are manufactured with 16 gauge steel frames and 14 gauge steel blades which gives them strength to
More information500-YVI PARALLEL FAN-POWERED AIR TERMINAL UNIT FORM EG3 (404)
500-YVI PARALLEL FAN-POWERED AIR TERMINAL UNIT Table of Contents Introduction...3 500-YVI Features...4-5 Dimensional Data...6-7 ARI Rating Points...8 Statement of Standard Test Conformity...8 Motor Amperage
More informationLinear Slot Diffusers Model Slot 20 and Model Slot 25
December 06 Linear Slot Diffusers Linear Slot Diffusers Model Slot and Model Slot 25 Features 1 to 8 Slots mm or 25mm Slot widths Ceiling or Sidewall Applications Modular or Continuous Lengths Curved Sections
More informationSLLS Linear Ceiling Diffuser
SLLS Linear Ceiling Diffuser ASLI SLLS is a type of diffuser combine a high air change rate capacity with maximum flexibility in air pattern and volume control. It offers unobtrusive good looks together
More informationProduct Nomenclature G-X-AB-Z 0 = Zero Degree, 1 = 15 Degree, 2 = 15 Degree (2-way)
Fixed Bar Grills - Series G Description Caryaire Fixed Bar Grills are ideal for Supply as well as Return air, in both Cooling as well as Heating. It can be used in high side wall or ceiling applications.
More informationCEILING DIFFUSERS CEILING DIFFUSERS. Aluminum Construction Model 6300R See Page D135. Fully Adjustable Horizontal/Vertical Pattern
6 Model TWR "Twister" High Induction Stamped Face The "Twister" diffuser is engineered to optimize air distribution effectiveness. This next generation diffuser has a high induction, 360 swirl pattern
More informationHORD INSTALLATION & SERVICE MANUAL. Hospital Operating Room Diffusers INSTALLATION & SERVICE MANUAL. Date: 06 / 12 Reference # : E-10 1
HORD Hospital Operating Room Diffusers Date: 06 / 12 Reference # : E-10 1 2 Table of Contents Prior to Installation... 4 Ductwork Layout... 4 Installation of HORD Air Curtain System...5-9 T-Bar Ceiling...5-6
More informationC O L M A N. Air Distribution PERFORATED FACE DIFFUSERS P SERIES SERIES
C O L M A N Air Distribution E N G I N E E R E D A I R P R O D U C T S PERFORATED FACE DIFFUSERS P SERIES P SERIES PERFORATED FACE DIFFUSERS P SERIES QUALITY AND EFFICIENCY WITHOUT COMPROMISE Application:
More informationJ1-2. Table of Contents RETURN GRILLES
J1 RETURN GRILLE Table of Contents RETURN GRILLE / These fixedblade return grilles feature 3/4 blade spacing. Deflection will be fixed at 3 or. Available in aluminum or steel construction. / These fixedblade
More informationINDEX. Chapter2. air master. Grilles and Registers
Chapter2 INDEX A.Grilles and registers. 1. Supply air grille - front horizontal blades...: ASG-H...2.1 2. Supply air grille - front vertical blades...: ASG-V...2.2 3. Supply air register - front horizontal
More informationADJUSTABLE SLOT DIFFUSER TYPE: SE800
TYPE: SE800 Installation dimensions Construction with hanger brackets Construction without hanger brackets D C Application 7 E A 0 7 E A 0 The slot diffuser, type SE800 is used for the supply of cooled
More informationOVERVIEW Combination Supply/Return Diffuser (SARM)
OVERVIEW Combination Supply/Return Diffuser (SARM) APPLICATION INFORMATION The extruded aluminum square and rectangular supply and return diffusers are designed principally for packaged roof top type heating
More informationGRILLES AND REGISTERS
RILLES AND REISTERS RETURN AIR FIXED BARS This return air grille has extruded aluminum fixed blades that are reinforced for strength. Models H-HD, V-HD, FH-HD, FV-HD Page 1 Suffix '-O' adds a steel OBD
More informationLINEAR BAR GRILLES T SERIES. Quality and e!ciency without compromise
LINEAR BAR GRILLES T SERIES Quality and e!ciency without compromise Weltech Business Centre - Ridgeway - Welwyn Garden City - Hertfordshire AL7 2AA Tel: 01707 871526 - Fax: 01707 871 527 - email sales@jprservices.co.uk
More informationCEILING DIFFUSERS. Supply Air
Perforated Ceiling iffusers Nailor manufactures a full range of supply air and matching return air Perforated Ceiling iffusers. he perforated face is available in both corrosion-resistant steel and aluminum,
More informationCeiling swirl diffusers with perforated face plate
X X testregistrierung Ceiling swirl diffusers with perforated face plate Type Horizontal swirling air discharge For horizontal swirling supply air discharge creating high induction levels, with fixed air
More informationDonn. Air Diffuser. Technical Data. plenum. diffuser frame. Features
Technical Data Donn Features The DONN brand air diffuser provides air delivery and return for the ceiling system. Air is supplied through the lay-in diffuser, which is placed on the 2 x 2, narrow-suspension
More informationCeiling Slot Diffusers
Ceiling Slot Diffusers Series CJD, CJD-LED, CJD-MF, CSD, CSDA/I, CSDE, CSDF, CSDL, CSDR, CSD-T, CSD-MF, CWD, CWD-MF B CJD & CJD-LED Ceiling Jet Diffuser & Lighted Ceiling Jet Diffuser CSD Ceiling Slot
More informationPerforated Face Ceiling Diffusers
February 2011 Perforated Face Ceiling Diffusers Perforated Face Ceiling Diffuser Models PD, DFP and DPP Features NEW DROP PLQUE DESIGN 3 Model Types 1, 2, 3 or 4 way ir Patterns Extruded luminium Sections
More informationSeries HCD Airfoil Control Damper
Series HCD Airfoil Control Damper Model: HCD-1 The Holyoake HCD-1 is a precisely made volume and pressure control device with extremely low leakage when closed, (in the range of 0.003m 3 /s at 100 Pa).
More informationSERIES MBD. Multi-Blade Linear Diffuser
SERIES MBD Multi-Blade Linear Diffuser PUBLICATION DIFFUSERS 2 JULY 2015 Features - Singular or continuous designs. - One or two way blow. - Removable core with safety cord. - Alternate frames available
More informationB1-2. Table of Contents LOUVERED FACE DIFFUSERS
Table of Contents 2, FR,, M & M feature a round neck and four cones. & feature a round neck, four cones, and adjustable pattern controllers.,, M, & M feature a round neck and three cones. & feature a round
More informationGRILLES AND REGISTERS
ECRATE RETURN AND EXHAUST RILLES The eggcrate grilles and registers are constructed of thin, interlocked aluminum or stainless steel strips assembled in a square grid fashion that is available in a variety
More informationPremium Correctional Air Distribution. The First Name in Air Diffusion.
Premium Correctional Air Distribution The First Name in Air Diffusion www.anemostat.com PRODUCT DIRECTORY APPLICATIONS Stainless Steel S-Vent MAXIMUM SECURITY GRILLES NEW CONSTRUCTION page 16 page 4 &
More informationGRILLES AND REGISTERS
AIRFOIL BLADE RETURN AIR 45 DEFLECTION, 3/4 () BLADE SPACIN The airfoil blades are fixed at a 45 angle. This grille is vision proof when installed in a low or high sidewall location with grille blade deflection
More informationGRILLES AND REGISTERS
Heavy Duty Steel rilles and Registers, ymnasium Strength Nailor s Heavy Duty Steel rilles and Registers are manufactured with 16 gauge steel frames and 14 gauge steel blades which gives them strength to
More informationGRILLES AND REGISTERS
RILLES AND REISERS HEAVY DUY SAINLESS SEEL his grille is used mainly for return air applications that require strength and durability in corrosive or high humidity environments. he frame is welded and
More informationHigh Performance Linear System Recessed
Extruded aluminum linear corners complete an area that contains corners or straight turns. Tove corners have mitered cuts that are available in a standard, or custom angle. The Tove Corner is suitable
More informationWall and Ceiling Grille
September 14 Wall and Ceiling Grille Models SD, DD, EC, PG, G45, NVG, NB, GN, WB and GW Single and Double Deflection Fixed and Removable Core Eggcrate Perforated Grille 45 Fixed Blade Non Vision Bar Grilles
More informationSECURITY PRODUCTS GENERAL PRODUCT OVERVIEW. Security Products
GENERAL PRODUCT OVERVIEW Security Products Nailor offers a complete line of Security Grilles, Registers and Diffusers. The product line includes grilles and registers for maximum, medium and minimum security
More informationACTIVE CHILLED BEAM 6 1/4" HEATING 9 1/2" DISCHARGE DIRECTION. 1 7/8" u 1/4" NOZZLE SIZE:
LINEAR 24" WIDE Submittal Sheet WATER COIL CONNECTIONS 9 1/2" 6 1/4" HEATING 9 3/8" COOLING PRIMARY AIR CONNECTION DISCHARGE DIRECTION 17 1/16" FACE WIDTH 23 3/4" 2-WAY SHOWN DISCHARGE DIRECTION MOUNTING
More information