Steel Single Deflection Supply Grille, Register (RSSB, RTSB)
|
|
|
- Irene Osborne
- 6 years ago
- Views:
Transcription
1 Steel Single Deflection Supply Grille, Register (RSSB, RTSB) 1-3/8 2-9/16 Listed Size +2 Listed Size - 2/3 Listed Size 1-1/4 Listed Size +2 3/4 Application: Single Deflection Supply R&G provide a discharge directly away from the wall or ceiling and either vertical or horizontal adjustment of the air stream. Standard Features: Steel construction is durable and inexpensive. Blades are 3/4 deep, on 2/3 centers. Individually adjustable teardrop blades. Blades can be aligned horizontally or vertically. Mounts in most wall or ceiling styles. Foam gasket around edge of frame is standard. Register uses model RXEA opposed blade damper (p. A437). Minimum panel size is 4 x 4. Maximum panel size is 36 x 36. Panels can be joined for larger sizes (p. A311). Standard finish is electrocoat acrylic baked enamel. Standard color is #11 bright white. Optional Features: UL listed fusible link (p. A343). Tamper-proof screws (p. A342). Concealed hangers (p. A343). Pull cord and lever damper operators (p. A343). Debris screen (p. A343). Quick Select Chart This shows grilles with: A maximum NC of 35. A minimum duct velocity of 300 FPM. CFM Size Area 8 x x x x x x x x x x (75-275) (85-295) ( ) ( ) ( ) ( ) ( ) ( ) ( ) ( ) Model Numbering System OPTIONS R S S B H R - Register or Grille S - Steel Grille T - Steel Register Design Series S - Single Deflection, Supply FRONT BLADE ALIGNMENT H - Horizontal (Blades Parallel to Width) V - Vertical (Blades Parallel to Height) WIDTH Minimum HEIGHT 04-4 Minimum FRACTIONAL SIZE /8 2-1/4 3-3/ /8 6-3/4 7-7/8 FINISH 11 - Bright White (Default) 01 - Off-White 04 - Gray ADD ONS G - Gasket (Default) F - Fusible Link Q - Gasket & Fusible Link 1 - Debris Screen 2 - Gasket & Debris Screen 3 - Gasket, Debris Screen & Fusible Link 4 - Fusible Link & Debris Screen DAMPER OPERATOR X - Std. Operator (Default) P - Pull Cord Ceiling A - Pull Cord Wall V - Lever MOUNTING Y - Std. Screws (Default) N - No Screw Holes S - Sheared Frame for T-bar B - Tamper-proof Screws U - W-clips for Snap-in Ceiling C - Concealed Hangers Z - Z-clips for Spline Ceiling T - Panel: 24 x24 T-bar Ceiling A-249
2 Stainless Steel Single Deflection Supply R&G (RLSB, RMSB, RKSB) 1-3/8 2-9/16 Listed Size +2 Listed Size - 2/3 Listed Size 1-1/4 Listed Size +2 3/4 Application: Single Deflection Supply R&G provide a discharge directly away from the wall or ceiling and either vertical or horizontal adjustment of the air stream. Standard Features: Stainless steel (type 304) construction is highly corrosion resistant. Blades are 3/4 deep, on 2/3 centers. Individually adjustable teardrop blades. Blades can be aligned horizontally or vertically. Mounts in most wall or ceiling styles. Foam gasket around edge of frame is standard. Register RMSB uses opposed blade damper RXEA (p. A437). Register RKSB uses opposed blade damper RXTA (p. A437). Minimum panel size is 4 x 4. Maximum panel size is 36 x 36. Panels can be joined for larger sizes (p. A311). Standard finish is #22 satin polish with one coat of clear lacquer. Optional Features: Tamper-proof screws (p. A342). Concealed hangers (p. A343). Pull cord and lever damper operators (p. A343). Debris screen (p. A343). Quick Select Chart This shows grilles with: A maximum NC of 35. A minimum duct velocity of 300 FPM. CFM Size Area 8 x x x x x x x x x x (75-275) (85-295) ( ) ( ) ( ) ( ) ( ) ( ) ( ) ( ) Model Numbering System R - Register or Grille OPTIONS R L S B H L - Stainless Steel Grille M - Stainless Steel Register w/steel Damper K - Stainless Steel Register w/stainless Steel Damper DESIGN SERIES FRONT BLADE ALIGNMENT H - Horizontal (Blades Parallel to Width) V - Vertical (Blades Parallel to Height) S - Single Deflection, Supply WIDTH Minimum HEIGHT 04-4 Minimum Fractional Size /8 2-1/4 3-3/ /8 6-3/4 7-7/8 FINISH 22 - Satin Polish with One Coat Clear Lacquer (Default) 11 - Bright White Add Ons G - Gasket (Default) F - Fusible Link Q - Gasket & Fusible Link 1 - Debris Screen 2 - Gasket & Debris Screen 3 - Gasket, Debris Screen & Fusible Link 4 - Fusible Link & Debris Screen DAMPER OPERATOR X - Std. Operator (Default) P - Pull Cord Ceiling A - Pull Cord Wall V - Lever MOUNTING Y - Std. Screws (Default) N - No Screw Holes S - Sheared Frame for T-bar B - Tamper-proof Screws U - W-clips for Snap-in Ceiling C - Concealed Hangers Z - Z-clips for Spline Ceiling T - Panel: 24 x24 T-bar Ceiling A-250
3 PERFORMANCE DATA Single Deflection Supply R&G Steel (RSSB, RTSB) Stainless Steel (RLSB, RMSB, RKSB) Correction Factors for Grille Performance Total Pressure (Pt) Use table data unchanged. Throw Use table data unchanged for 0 setting. Multiply the table data by the following factor for different blade angle settings. Blade Angle Setting 22-1/2 45 Factor Sound Level Use table data unchanged for 0 setting. Add the following to arrive at NC values for different blade angle settings. Duct Velocity (fpm) Blade Setting Correction Factors for Register Performance Total Pressure (Pt) Use table data unchanged for 0 setting. Multiply the table data for Total Pressure by the following factor for different blade angle settings. Blade Angle Setting /2 45 Factor Throw Use table data unchanged for 0 setting. Multiply the table data by the following factor for different blade angle settings. Blade Angle Setting 22-1/2 45 Factor Sound Level Use table data unchanged for 0 setting. Add the following to arrive at NC values for different blade angle settings. Duct Velocity (fpm) Blade Setting Duct Velocity Duct Total Nominal Area Press. 22-1/ Size (ft 2 ) (Pt) x Flow (CFM) Throw Sound (NC) <20 <20 <20 <20 <20 <20 < x Flow (CFM) x4 Throw Sound (NC) <20 <20 <20 <20 <20 < x Flow (CFM) Throw Sound (NC) <20 <20 <20 <20 < x Flow (CFM) Throw Sound (NC) <20 <20 <20 <20 < x Flow (CFM) Throw Sound (NC) <20 <20 <20 < x Flow (CFM) x6 Throw Sound (NC) <20 <20 <20 < Notes on Performance Data: Throw data is based on wall mounting height of 8-10 feet. Throw values are given in feet to a terminal velocity of 50 fpm. Testing was conducted under 20 ΔT cooling conditions. NC values are based on a room absorption of 10db re watts. Actual performance in the field may vary. A-251
4 PERFORMANCE DATA Single Deflection Supply R&G Steel (RSSB, RTSB) Stainless Steel (RLSB, RMSB, RKSB) Notes on Performance Data: Throw data is based on wall mounting height of 8-10 feet. Throw values are given in feet to a terminal velocity of 50 fpm. Testing was conducted under 20 ΔT cooling conditions. NC values are based on a room absorption of 10db re watts. Actual performance in the field may vary. Duct Velocity Duct Total Nominal Area Press. 22-1/ Size (ft 2 ) (Pt) x Flow (CFM) Throw Sound (NC) <20 <20 <20 < x Flow (CFM) x4 Throw x6 Sound (NC) <20 <20 < x Flow (CFM) Throw Sound (NC) <20 <20 < x Flow (CFM) Throw Sound (NC) <20 <20 < x Flow (CFM) x6 Throw Sound (NC) <20 < x Flow (CFM) Throw Sound (NC) <20 < x Flow (CFM) x12 Throw Sound (NC) <20 < x Flow (CFM) Throw Sound (NC) <20 < x Flow (CFM) x18 Throw x10 Sound (NC) <20 < x Flow (CFM) Throw Sound (NC) < x Flow (CFM) Throw Sound (NC) < x Flow (CFM) x12 Throw Sound (NC) < x Flow (CFM) x14 Throw x24 Sound (NC) < x Flow (CFM) Throw Sound (NC) < x Flow (CFM) Throw Sound (NC) < x Flow (CFM) Throw Sound (NC) < x Flow (CFM) Throw Sound (NC) x Flow (CFM) Throw Sound (NC) A-252
5 Multi-Panel Construction Multi-Panel Construction for the following Registers & Grilles Steel Stainless Steel Aluminum Single Deflection RSSB, RTSB RLSB, RMSB, RKSB RASM, RNSM Double Deflection RSDB, RTDB RLDB, RMDB, RKDB RADM, RNDM 0 Fixed Return RSRB, RTRB RLRB, RMRB, RKRB RARM, RNRM 45 Fixed Return RSAB, RTAB RLAB, RMAB, RKAB RAAM, RNAM In-line Construction W: Over 72 W: H: Up to 36 H: Up to 36 Height: Up to 36 Width: 38 to 72 Two sections. Any blade alignment. Height: Up to 36 Width: Over 72 Three or more sections. Any blade alignment. Height: Width: Up to 36 Any blade alignment Height: Over 72 Width: Up to 36 Three or More Sections Any blade alignment W: Up to 36 (13) 1/4 (6) W: Up to Maximum single panel width and height is 36 listed size regardless of blade alignment. 2. Panels are made in even inch increments unless specified otherwise. 3. Front blade alignment is as pictured. 4. Grille height & width dimensions shown are listed size dimensions. 5. Panel flanges are sheared and aligned with joining strips. H: H: Over 72 Ganged Construction 1. Maximum single panel width is 36 listed size. 2. Maximum single panel height is 36 listed size. 3. Panels will be made in even inch increments unless specified otherwise. 4. Front blade alignment is always parallel to center support. 5. Either the vertical or horizontal joint can be sheared down, but not both. 6. The center support can be aligned vertically or horizontally, depending on blade alignment desired. It is shown here mounted horizontally. 7. Grille height and width dimensions shown are listed size dimensions. 8. Metric dimensions are shown in millimeters. Duct Height Duct Width W: Center Support installs flush with wall Wall Angle Center Support Attachment to Wall Opening Wall 2-3/8 (60) Cross-Sectional View of Center Support with Grilles Attached (13) 1/4 (6) H: /2 (13) 2- (64) 1-1/4 (32) 2 (51) A-299
6 Multi-Panel Construction Multi-Panel Construction for the following Registers & Grilles Louvered Return Perforated Return In-Line Construction Steel RSLA, RTLA RSFA, RTFA Height: Up to 36 Height: Up to 48 Width: Over 96 Width: Over 72 Horizontal Blade Alignment Vertical Blade Alignment Three or More Sections Three or More Sections W Height: Width: Up to 48 Horizontal Blade Alignment W Height: Over 72 Width: Up to 48 Horizontal Blade Alignment Three or More Sections W W H H H Height: Up to 36 Height: Up to 48 Width: 50 to 96 Width: 38 to 72 Horizontal Blade Alignment Vertical Blade Alignment H (13) 1/4 (6) Height: Width: Up to 36 Vertical Blade Alignment Ganged Construction 1. Either the vertical or horizontal joint can be sheared down, but not both. 2. Maximum single panel width is 48 listed size. 3. Maximum blade length on louvered face models is listed size Maximum single panel height is 36 listed size. 5. Panels are made in even inch increments unless specified otherwise. 6. Blade alignment is always parallel to center support. 7. The center support can be aligned vertically or horizontally, depending on the blade alignment desired. It is shown here mounted horizontally. 8. Grille dimensions shown are listed size dimensions. (13) 1/4 (6) Height: Over 96 Width: Up to 36 Vertical Blade Alignment Three or more Sections Duct Height H: Panels will be made in even inch increments unless specified otherwise. 2. Dimensions shown are listed size dimensions. 3. Max. blade length on louvered face models is nominal Panels are sheared and aligned with joining strips. Duct Width W: Center Support install flush with wall Wall Angle Center Support Attachment to Wall Opening Wall Cross-Sectional View of Center Support with Grilles Attached 1/2 (13) 2- (64) 1-1/4 (32) 2-3/8 (60) A (51)
7 Multi-Panel In-Line & Ganged Construction Multi-Panel In-Line Construction 1. Maximum single panel width and height is 48 nominal size, regardless of blade alignment. 2. Panels are made in even inch increments unless specified otherwise. 3. Front blade alignment is as pictured. 4. Grille dimensions shown are nominal dimensions. 5. Panel flanges are sheared and aligned with joining strips. Height: Width: Up to 48 Any Blade Alignment H (50-96 ) W (Up to 48 ) Height: Up to 48 Width: (Two Sections) Any Blade Alignment 1/4 Height: Up to 48 Width: Over 96 Three or more Sections Any Blade Alignment Height: Over 96 Width: Up to 48 Three or more Sections Any Blade Alignment W (Up to 48 ) W (50-96 ) W (Over 96 ) H: (Up to 48 ) H: (Up to 48 ) Multi-Panel Ganged Construction 1. Maximum single panel width and height are 48 nominal size. 2. Panels are made in even inch increments unless specified otherwise. 3. Front blade alignment is always parallel to center support. 4. Either the vertical or horizontal joint can be sheared down, but not both. 5. The center support can be aligned vertically or horizontally, depending on blade alignment desired. 6. Grille dimensions shown are nominal dimensions. W: Cross-Sectional View of Center Support H: (50-98) 2-1-1/4 (13) Duct Height 2 Duct Width 1/4 2-3/8 (60) Center Support installs flush with wall Wall Angle Wall Center Support Mounted flush with wall (Shown aligned horizontally). A-301
8 Multi-Panel Construction for M-Series Alum. R&G All Sections of Butted Grilles or Registers will be made in Listed Sizes as Standard. STANDARD REGISTERS AND GRILLES Applies to all models except louvered return air registers and grilles and door partition grilles. Registers and grilles over 36 x 36 butting two or more grilles together. GRILLES AND REGISTERS HAVING FOUR SECTIONS AND OVER NOTES: Extruded aluminum supporting members with mounting angles, are furnished where required. Center support may run vertically or horizontally, depending upon combination of grilles used. Combination of panels will be furnished to fit duct opening with satisfactory clearance. A-302
9 Screw Hole Locations Screw Hole Location for the following Registers & Grilles Steel Aluminum Stainless Steel Single Deflection RSSB, RTSB RASM, RNSM RLSB, RMSB, RKSB Double Deflection RSDB, RTDB RADM, RNDM RLDB, RMDB, RKDB 0 Fixed Return RSRB, RTRB RARM, RNRM RLRB, RMRB, RKRB 45 Fixed Return RSAB, RTAB RAAM, RNAM RLAB, RMAB, RKAB Louvered Return RSLA, RTLA Perforated Return RSFA, RTFA RAFM, RNFM Screw holes on the face are standard on Registers and Grilles. Steel R&G can be ordered without screw holes, for use with concealed hangers (Opt. N). The screw holes is 5/32 in diameter. Each Register or Grille is provided with the appropriate number of screws as standard. The standard screw is #8 x 1-1/4 pan head screw, with a flat blade head. Tamper-proof screws are available as an option (Opt. B). Nominal Size Plus 2 1/2 Nominal +1 One Screw hole per Side Nominal Size Range 4 through 18. Nominal Size Two Screw holes per Side Nominal Size Range 19 through 31. 1/2 Nominal +1 Nominal Size Three Screw holes per Side Nominal Size Range 32 through A-303
Square/Rect. and Square Louvered Face and Plaque Face Diffuser
/Rect. and Louvered Face and Plaque Face Diffuser Series J: Easily Adjustable from Horizontal to Vertical Vertical Discharge Application: Carnes steel (SK) and aluminum (SE) louvered face diffusers are
LAMINAR FLOW DIFFUSER Model DLAB
Laminar & Radial Flow Diffuser LAMINAR FLOW DIFFUSER Model DLAB Application Laminar Flow diffusers are used to deliver air to surface directly underneath in a non-aspirating air pattern, with the minimum
OVERVIEW Combination Supply/Return Diffuser (SARM)
OVERVIEW Combination Supply/Return Diffuser (SARM) APPLICATION INFORMATION The extruded aluminum square and rectangular supply and return diffusers are designed principally for packaged roof top type heating
EXTRUDED ALUMINUM LINEAR BAR GRILLES AND REGISTERS
SAUDI AIR CONTROL SYSTEM INDUSTRIAL REGISTRATION NO.353 EXTRUDED ALUMINUM LINEAR BAR GRILLES AND REGISTERS EXTRUDED ALUMINUM LINEAR BAR GRILLES AND REGISTERS SERIES GLG and GLR 1, 2, 3, 4/5,6,7,8,9,10.
SECURITY PRODUCTS GENERAL PRODUCT OVERVIEW. Security Products
GENERAL PRODUCT OVERVIEW Security Products Nailor offers a complete line of Security Grilles, Registers and Diffusers. The product line includes grilles and registers for maximum, medium and minimum security
Extruded Aluminum Construction 1/4 Bars on 1/2 Centers Floor, Sidewall or Ceiling Mount Pencil Proof
OVERVIEW Linear Bar, Grilles and Registers OVERVIEW LINEAR BAR, GRILLES and REGISTERS Curtainaire Trimaire Varicore Extruded Aluminum Construction 1/4 Bars on 1/2 Centers Floor, Sidewall or Ceiling Mount
LINEAR DIFFUSERS AND BAR GRILLES
49-240 48LL1 49-280 49-480 48LL2 Linear ar Grilles The Nailor 4900 Series provides an extruded aluminum bar grille that offers beautiful styling and efficient performance. Linear bar grilles offer a choice
K1-2. Table of Contents LINEAR BAR GRILLES 1500, 1500MC, 1800, 1800MC
K Table of Contents, This series of extruded aluminum supply and return linear bar grilles are for ceiling, sidewall, sill (), and floor () applications. Blade thickness is 7/32., This series of extruded
LINEAR DIFFUSERS AND BAR GRILLES
LINEAR DIFFUSERS AND AR GRILLES LINEAR DIFFUSERS AND AR GRILLES LINEAR SLOT DIFFUSER PLENUMS FOR TECHZONE TYPE CEILINGS Model Series 5300TZ Plenums are designed to fit the 5000TZ Series Slot Diffusers.
DRUM LOUVERS DRUM LOUVERS 45DL SERIES. Models: 45DL1 Single Vanes 45DL2 Split Vanes G151 HIGH CAPACITY LONG THROW ALUMINUM CONSTRUCTION
DRUM LOUVERS 45DL SERIES HIH CAPACITY LON THROW ALUMINUM CONSTRUCTION Models: Single Vanes 45DL2 Split Vanes Suffix '-O' adds a steel opposed blade damper Models -O and 45DL2 Model Series 45DL Drum Louvers
MODULAR CORE CEILING DIFFUSERS
MOEL SQUARE 12345-10 MOULAR CORE SQUARE IFFUSERS ROUN NECK SQUARE 1, 2, 3 OR ROUN 4-WAY AJUSTABLE NECK SQUARE ISCHARGE ROUN PATTERN NECK Steel Model: 7500 Suffix '-O' adds a steel opposed blade damper
Optima EXHAUST GRILL AND AIR LOUVER. Perforated Ceiling Diffusers. Features: Standard square sizes:
Perforated Ceiling Diffusers OPTIMA ceiling diffuser with perforated face, are recoended for heating, ventilating and cooling in centralized air conditioning systems. Perforated face diffusers, with 4-3-
SECURITY PRODUCTS GENERAL PRODUCT OVERVIEW. Security Products
GENERAL PRODUCT OVERVIEW Security Products Nailor offers a complete line of Security Grilles, Registers and Diffusers. The product line includes grilles and registers for maximum, medium and minimum security
STEEL LOUVERED DIFFUSERS [CFM Range is only a guide. See Manufacturer Catalog for complete data. All NC Levels in Acceptable Range<32.
STEEL LOUVERED DIFFUSERS TUTTLE & BAILEY Model 1300 - Round Neck Steel, Lay-In Tee Bar Mounting Neck Size Panel Size CFM Range Price Each Volume Damper Model RBN *6 12 x 12 75-180 $19 $12 6 24 x 24 75-180
INDEX. Chapter3. air master. Linear Bar Grilles
Chapter3 INDEX A Linear bar grilles: 1. Supply linear bar grille...: ASLG...3.1 2. Supply linear bar register...: ASLR...3.2 3. Return linear bar grille...: ARLG...3.3 4. Return linear bar register...:
Series DD & SD-20 Supply Grilles & Registers
Series DD & SD-20 Supply Grilles & Registers Grille - Two Sets of Louver Blades Model DDL-20 Two sets of louver blades. Front set parallel to long dimension. Rear set parallel to short dimension. All louver
SECURITY PRODUCTS GENERAL PRODUCT OVERVIEW. Security Products
GENERAL PRODUCT OVERVIEW Security Products Nailor offers a complete line of Security Grilles, Registers and Diffusers. The product line includes grilles and registers for maximum, medium and minimum security
EX C E L L E N C E ISO 9001 CERTIFIED COMPANY LINEAR BAR GRILLES.
25 YEARS OF EX C E L L E N C E ISO 9001 CERTIFIED COMPANY 3.0 INDEX ISO 9001 CERTIFIED COMPANY SECTION TOPIC PAGE 3.1 Double deflection linear bar grille ASLG 3 3.2 Double deflection linear bar register
D1-2. Table of Contents MODULAR CORE DIFFUSERS. 1240, Introduction & Product Description... D1-3. Dimensional Information...
D Table of Contents, These supply, ceiling diffusers feature four handremovable modular cores. Available in steel or aluminum construction. P, P These supply, ceiling diffusers feature four handremovable
4880 This heavy duty, double deflection, supply grille features 1/2 front and 3/4 back blade. spacing. Available in steel construction only.
I1I Table of Contents 1/51 1M/51M These supply grilles feature individually adjustable curved blades. Available in steel or aluminum construction. /5 These single deflection supply grilles feature 3/ blade
EGG CRATE RETURN GRILLE
80 EGG CRATE RETURN GRILLE 80 The 80 Series is available in various mounting styles and features sturdy construction, consisting of a heavy gauge aluminum grid core, optional extruded aluminum borders
LOUVERED FACE GRILLES AND REGISTERS
Performance Notes for Supply rilles and Registers, 6 and 67 Series Throw, Spread and Drop The isovel diagrams shown below, illustrate in plan view, the relationship of horizontal spread to throw for three
Product Nomenclature G-X-AB-Z 0 = Zero Degree, 1 = 15 Degree, 2 = 15 Degree (2-way)
Fixed Bar Grills - Series G Description Caryaire Fixed Bar Grills are ideal for Supply as well as Return air, in both Cooling as well as Heating. It can be used in high side wall or ceiling applications.
GRILLES AND REGISTERS
Airfoil Blade Return Air Models 71FH, 7145H 45 Deflection, 3/4" (19) Blade Spacing The airfoil blades are fixed at a 45 angle. This grille is vision proof when installed in a low or high sidewall location
PERFORATED CEILING DIFFUSERS
PERFORAE MOEL PERFORAE 12345-10 CEILING SQUARE IFFUSERS ROUN NECK SQUARE ROUN NECK SUPPLY SQUARE 1, 2, 3 OR ROUN 4-WAY AJUSABLE NECK ISCHARGE PAERN Steel Models: 4320 Flush Face 4325 rop Face Aluminum
C O L M A N. Air Distribution LINEAR SLOT DIFFUSERS CD SERIES SERIES
C O L M A N Air Distribution E N G I N E E R E D A I R P R O D U C T S LINEAR SLOT DIFFUSERS CD SERIES CD SERIES LINEAR SLOT DIFFUSERS QUALITY AND EFFICIENCY WITHOUT COMPROMISE Application Colman Moducel
CEILING DIFFUSERS D12 CEILING DIFFUSERS
PREMIUM This perforated return has an extruded aluminum frame with a narrow border that is visible within the T-Bar module. See Model Series 4330 and 4330CB for the matching supply air diffusers. Flush
makes sure products are delivered Products are offered in steel,
Residential Construction Features Residential Registers, Grilles & Diffusers No one satisfies the demands for For example: an electro-deposition air distribution solutions better than paint creates a flawless
All-steel construction For installation of #16 diffuser when not using a damper. Golden Sand enamel finish. 12 Butterfly Damper
11 Duct Ring All-steel For installation of #16 diffuser when not using a damper Golden Sand enamel finish Size A 6 7-1/2 8 9-1/2 10 10-7/8 12 12-7/8 14 14-7/8 18 18-3/16 11 Available Sizes (in.) 6, 8,
PERFORATED CEILING DIFFUSERS
PERFORAE PERFORAE CURVE MOEL BLAE 12345-10 IFFUSERS SQUARE ROUN NECK SQUARE SUPPLYROUN NECK 4-WAY AJUSABLE ISCHARGE SQUARE ROUN NECK PAERN (SANAR) 1, 2 OR 3-WAY ISCHARGE PAERN (OPIONAL) Steel Models: 4320CB
GRILLES AND REGISTERS
RILLES AND REISTERS Models 45DL1, 45DL2 Models 813SH-O, 813DV Drum Louvers These extruded aluminum drum louvers are appropriate when high volumes of air are used and in spot heating and cooling applications.
PATTERN CEILING DIFFUSERS
PATTERN CEILING IFFUSERS Model 4260 Model 7500 Eggcrate Return This aluminum face return diffuser features 1/2" x 1/2" x 1/2" (13 x 13 x 13) eggcrate that provides a high free area. It is offered with
GRILLES AND REGISTERS
Heavy Duty Steel rilles and Registers, ymnasium Strength Nailor s Heavy Duty Steel rilles and Registers are manufactured with 16 gauge steel frames and 14 gauge steel blades which gives them strength to
GRILLES AND REGISTERS
Heavy Duty Steel rilles and Registers, ymnasium Strength Nailor s Heavy Duty Steel rilles and Registers are manufactured with 16 gauge steel frames and 14 gauge steel blades which gives them strength to
LINEAR SLOT DIFFUSERS
LINEAR SLOT DIFFUSERS MODEL CD Weltech Business Centre - Ridgeway - Welwyn Garden City - Hertfordshire AL7 2AA Tel: 01707 871526 - Fax: 01707 871 527 - email sales@jprservices.co.uk - www.jprservices.co.uk
Registers for spiral ducts
Registers for spiral ducts RGS-3 5 The RGS-3 is a supply/return register with adjustable double deflection blades and a volume damper designed specifically for direct mounting on a spiral duct. The use
CEILING DIFFUSERS GENERAL PRODUCT OVERVIEW
GENERAL PROUCT OVERVIEW Ceiling iffusers Quality Assured Products, unobtrusive clean lines for appearance, careful engineering and professional workmanship with the backing of an industry leader - these
CEILING DIFFUSERS CEILING DIFFUSERS
CEILING IFFUSERS "TWISTER" HIGH INUCTION STAMPE FACE The "Twister" diffuser is engineered to optimize air distribution effectiveness. This next generation diffuser has a high induction, 360 swirl pattern
Application Guidelines
Grilles and Registers Application Guidelines Introduction Overview It is the intent of this section to give some basic application guidelines for the use of supply and return grilles and registers in a
CEILING DIFFUSERS GENERAL PRODUCT OVERVIEW
GENERAL PROUCT OVERVIEW Ceiling iffusers Quality Assured Products, unobtrusive clean lines for appearance, careful engineering and professional workmanship with the backing of an industry leader - these
GRILLES AND REGISTERS
Curved Spiral Duct rilles Nailor s unique curved spiral duct grille design offers an architecturally superior appearance and saves installation time and money by directly mounting to the duct. This eliminates
Application Guidelines
Grilles and Registers Application Guidelines Introduction Overview It is the intent of this section to give some basic application guidelines for the use of supply and return grilles and registers in a
CEILING DIFFUSERS CEILING DIFFUSERS
Model 4340M Model 4330CB Premium, Curved Blade Pattern Controllers The perforated diffusers in this series have an extruded aluminum frame with a narrow border that is visible within the T-Bar module.
CRNRR, 5CRNRR These concentric ring nozzles feature a stub duct mounting frame for smaller duct work
H1 AI NOZZLES & OUN GILLES Table of Contents AI NOZZLES & OUN GILLES PN This round punkah nozzle features a surface mounting frame. PN This round punkah nozzle features a stub duct mounting frame. PN This
GRILLES AND REGISTERS
Models 51EC, 67EC Models 51PR, 67PR Eggcrate Return and Exhaust rilles The eggcrate grilles and registers are constructed of thin, interlocked aluminum or stainless steel strips assembled in a square grid
CEILING DIFFUSERS CEILING DIFFUSERS. Aluminum Construction Model 6300R See Page D135. Fully Adjustable Horizontal/Vertical Pattern
6 Model TWR "Twister" High Induction Stamped Face The "Twister" diffuser is engineered to optimize air distribution effectiveness. This next generation diffuser has a high induction, 360 swirl pattern
J1-2. Table of Contents RETURN GRILLES
J1 RETURN GRILLE Table of Contents RETURN GRILLE / These fixedblade return grilles feature 3/4 blade spacing. Deflection will be fixed at 3 or. Available in aluminum or steel construction. / These fixedblade
FILTERED SUPPLY CENTRIFUGAL Belt Drive
FILTERED SUPPLY CENTRIFUGAL Belt Drive FILTERED SUPPLY CENTRIFUGAL - BELT DRIVE SECTION 9 Carnes Models VSBB and VHBB centrifugal filtered roof supply fans are available in six sizes - 8 through 20 with
Multicore diffusers. introduction. type control. options. finish. sizes SQUARE AND RECTANGULAR DIFFUSERS
SQUARE AND RECTANGULAR DIFFUSERS introduction The IC diffuser is a versatile form of air terminal offering the facility of multi directional throw patterns in a wide range of frame sizes. Each core style
CUSTOM FLOW ARCHITECTURAL SLOT DIFFUSER
ARCHITECTURAL SLOT DIFFUSER Custom Flow (CF) slot diffusers are uniquely designed for curving and long continuous installations. The CF offers a large range of airflow flexibility with one or two slot
FlowBar High Capacity Slot Diffuser
October 2016 FlowBar High Capacity Diffuser Model HT (High Throw) Model JT (Jet Throw) Features HT & JT 25mm, 38mm, 51mm, 63mm & 76mm s Ceiling or Sidewall Applications Modular or Continuous s Curved Sections
Price O.R. Systems AIR CURTAIN SYSTEM
Price O.R. Systems AIR CURTAIN SYSTEM The Price Air Curtain System includes non-aspirating laminar flow diffusers directly above the surgical area with a surrounding four-sided linear slot diffuser system
C O L M A N. Air Distribution LINEAR SLOT DIFFUSERS CE SERIES SERIES
C O L M A N Air Distribution E N G I N E E R E D A I R P R O D U C T S LINEAR SLOT DIFFUSERS CE SERIES CE SERIES LINEAR SLOT DIFFUSERS CE SERIES QUALITY AND EFFICIENCY WITHOUT COMPROMISE Application Colman
FAN TERMINAL UNITS Constant Volume (Series Flow), Standard Design
FAN TERAL UNITS Constant Volume (Series Flow), Standard Design Models ACF w/o Coil ACW w/hot Water Coil ACE w/electric Coil The Carnes constant volume fan terminal unit provides constant air volume to
LINEAR SLOT DIFFUSERS PLENUMS
LINEAR SLOT DIFFUSER PLENUMS ADAPTORS FOR MODEL SERIES 5000 LINEAR SLOT CEILING DIFFUSERS Standard Models: 5350(I) 1/2" (13) Slot 5375(I) 3/4" (19) Slot 5310(I) 1" (25) Slot Modified Performance Models:
AIRODYNE CATALOGUE VOLUME CONTROL TAMPERS CONSTRUCTION / MATERIALS
AIRODYNE CATALOGUE VOLUME CONTROL TAMPERS CONSTRUCTION / MATERIALS Airodyne multi leaf volume control tampers have been specifically designed for use in air conditioning and ventilation system for volume,
LINEAR BAR GRILLES. GRILLES-Linear Bar
LINEAR BAR GRILLES A range of linear bar grilles with horizontal blades at either 0, 15, 0 or 45 deflection and fixed or removable cores. Usually used in sidewall applications, but they are also designed
Wall and Ceiling Grille
September 14 Wall and Ceiling Grille Models SD, DD, EC, PG, G45, NVG, NB, GN, WB and GW Single and Double Deflection Fixed and Removable Core Eggcrate Perforated Grille 45 Fixed Blade Non Vision Bar Grilles
ceiling & inline/cabinet ventilators
Air Moving Solutions. ceiling & inline/cabinet ventilators T-Series ( T TL ) CATALOG 4600 March 2012 Ceiling&InlineVentilators T-Series T TL Twin City Fan & Blower s T Series Ceiling and TL Series Inline/Cabinet
LINEAR DIFFUSERS AND BAR GRILLES
LINEAR DIFFUSERS AND AR GRILLES GENERAL PRODUCT OVERVIEW Linear Diffusers and ar Grilles Linear type diffusers and grilles have been developed to satisfy architectural and engineering applications that
LINEAR BAR GRILLES T SERIES. Quality and e!ciency without compromise
LINEAR BAR GRILLES T SERIES Quality and e!ciency without compromise Weltech Business Centre - Ridgeway - Welwyn Garden City - Hertfordshire AL7 2AA Tel: 01707 871526 - Fax: 01707 871 527 - email sales@jprservices.co.uk
CEILING DIFFUSERS GENERAL PRODUCT OVERVIEW
CEILING IFFUSERS CEILING IFFUSERS GENERAL PROUCT OVERVIEW Ceiling iffusers Quality Assured Products, unobtrusive clean lines for appearance, careful engineering and professional workmanship with the backing
RPD ROUND PLAQUE DIFFUSER
ROUND PLAQUE DIFFUSER s (RPD) provide a balance between engineering and architectural needs, with a flush appearance and superior VAV performance in both ceiling and exposed duct mounting applications.
Single Wall Round. Double Wall Round. Flat Oval. Comfort. Silencer. Industrial
Single Wall Round Double Wall Round Flat Oval Comfort Silencer Industrial Table of Contents Products Registers RGS-3 TRGSU TRGSUI XRGSU XRGSUI SRTRGSU SRTRGSUI SRXRGSU SRXRGSUI...........................
Positive Seal Damper Blades with Vinyl Gaskets 2.5" SERIES 3000 SIDE MOUNT - NO FLANGE ORDERING METHOD FOR BACKDRAFT & MOTORIZED BACKDRAFT DAMPERS
BACKDRAFT DAMPERS BLADE OPTION: SR: 0.016-0.020 roll formed aluminum with vinyl gasket - used with fan motors under 1 HP SE: 0.05 extruded aluminum with vinyl gasket - used with fan motors over 1 HP Positive
C O L M A N. Air Distribution LINEAR BAR GRILLES T SERIES SERIES
C O L M A N Air Distribution E N G I N E E R E D A I R P R O D U C T S LINEAR BAR GRILLES T SERIES T SERIES C O L M A N Air Distribution E N G I N E E R E D A I R P R O D U C T S LINEAR BAR GRILLES T SERIES
SPD SQUARE PLAQUE DIFFUSER
SQUARE PLAQUE DIFFUSER The (SPD) has a flush appearance, making it ideal for architecturally-conscience commercial spaces, and provides industry-leading low pressure drop and sound generation with a 360
ISSUE B, OCT Architectural Square Ceiling Diffusers. UNI & AUNI Diffusers. Advanced Air
ISSUE B, OCT 2009 Architectural Square Ceiling Diffusers UNI & AUNI Diffusers Product Overview - Uni Series Architectural Ceiling Diffusers Uni Series High Performance Square Face Round Neck The Model
B1-2. Table of Contents LOUVERED FACE DIFFUSERS
1 LOUVERED FACE DIFFUER Table of Contents LOUVERED FACE DIFFUER 12 1400, 1400FR, 1400, M1400 & M1400 These supply diffusers feature a round neck and four cones. 1400A & 1400A These supply diffusers feature
HIGH CAPACITY LINEAR SLOT DUFFUSERS
HIGH CAPACITY LINEAR SLOT DUFFUSERS CB SERIES Quality and efficiency without compromise Weltech Business Centre - Ridgeway - Welwyn Garden City - Hertfordshire AL7 2AA Tel: 01707 871526 - Fax: 01707 871
EYELASH DIFFUSERS E SERIES. Quality and efficiency without compromise
EYELASH DIFFUSERS E SERIES Quality and efficiency without compromise Weltech Business Centre - Ridgeway - Welwyn Garden City - Hertfordshire AL7 2AA Tel: 01707 71526 - Fax: 01707 71 527 - email sales@jprservices.co.uk
BP - Floor grilles E-04/07
BP - Floor grilles 1-8.0-01.00-E-04/07 Floor grilles BP BP Floor grilles Versions - BP5 (deflection 0 ) - BP3 (deflection 15 ) - BP-RG (adjustable millimetrically) - BP-CTX (with counterframe) The supply
LINEAR SLOT DUFFUSERS
LINEAR SLOT DUFFUSERS CE SERIES Quality and efficiency without compromise Weltech Business Centre - Ridgeway - Welwyn Garden City - Hertfordshire AL 2AA Tel: 010 12 - Fax: 010 1 2 - email sales@jprservices.co.uk
CEILING DIFFUSERS CEILING DIFFUSERS. Aluminum Construction Model 6300R See Page D135. Fully Adjustable Horizontal/Vertical Pattern
6 Model TWR "Twister" High Induction Stamped Face The "Twister" diffuser is engineered to optimize air distribution effectiveness. This next generation diffuser has a high induction, 360 swirl pattern
CEILING & INLINE/CABINET VENTILATORS
Twin City Fan INDUSTRIAL PROCESS AND COMMERCIAL VENTILATION SYSTEMS CEILING & INLINE/CABINET VENTILATORS T-Series TL-Series CATALOG 4600 MARCH 2018 CEILING & INLINE VENTILATORS OVERVIEW T I TL T-Series
CEILING DIFFUSERS CEILING DIFFUSERS
"TWISTER" HIGH INUCTION STAMPE FACE The "Twister" diffuser is engineered to optimize air distribution effectiveness. This next generation diffuser has a high induction, 360 swirl pattern for a superior
MODELS FF & FFC CEILING AND INLINE/CABINET VENTILATORS
Model FF Model FFC Model ff Features Exhaust air up to 1500 CFM Forward curve centrifugal wheel for high static pressure capabilities to 1 w.g. Resilient mount, low RPM motor for quiet operation (except
GRILLES AND REGISTERS
RILLES AND REISTERS RETURN AIR FIXED BARS This return air grille has extruded aluminum fixed blades that are reinforced for strength. Models H-HD, V-HD, FH-HD, FV-HD Page 1 Suffix '-O' adds a steel OBD
TURNING AIR INTO SOLUTIONS. CEILING & INLINE/CABINET VENTILATORS. T-Series TL-Series
TURNING AIR INTO SOLUTIONS. CEILING & INLINE/CABINET VENTILATORS T-Series TL-Series CATALOG 4600 March 2018 CEILING & INLINE VENTILATORS Overview T I TL Twin City Fan & Blower s T-Series Ceiling and TL-Series
DRUM JET DIFFUSERS TYPE: DJA DJB DJAP DJBP
TYPE: DJA DJB DJAP DJBP APPLICATION Type DJ As with type AJ diffusers, this product is also designed to project large volumes of air over long distances, but particularly lends itself to sidewall or ductmounting,
Catalogue. FlowBar. High Capacity Slot Diffuser.
Catalogue FlowBar High Capacity Slot Diffuser www.air-diffusion.co.uk sales@air-diffusion.co.uk Content Introduction... 4 Diffuser Specification... 5 Air Patterns... 6 Flange Styles... 7 Curved Sections...
L1-2. Table of Contents SECURITY GRILLES 1310, 1310TF, Introduction & Dimensional Information... L1-13
L Table of Contents 0, 0TF & 50 These perforated face supply grilles feature 5/6 diameter holes on 7/6 staggered centers. This perforated face supply grille features /6 diameter holes on 9/2 staggered
INDEX. Chapter2. air master. Grilles and Registers
Chapter2 INDEX A.Grilles and registers. 1. Supply air grille - front horizontal blades...: ASG-H...2.1 2. Supply air grille - front vertical blades...: ASG-V...2.2 3. Supply air register - front horizontal
Integrated 1/4" Pressure Port (Balancing/commissioning) (Accessible From Face Side) Cooling Water Connections
Dimensional Data Integrated 1/4" Pressure Port (Balancing/commissioning) (Accessible From Face Side) Heating Water Connections (Not Supplied On 2 Pipe) Primary Air Connection (D - 1/8") 4 Way Air Discharge
COMMERCIAL HYDRONIC PRODUCTS A MESTEK COMPANY. Convectors STEAM AND HOT WATER RADIATION CC-14
COMMERCIAL HYDRONIC PRODUCTS A MESTEK COMPANY Convectors STEAM AND HOT WATER RADIATION CC-1 Sterling Convectors are engineered for both forced hot water and two-pipe steam heating system installation with
6490, These perforated. ceiling returns feature a. square neck. Aluminum or steel perforated face. is available. 6600, 56600, 6600FR
C1 Table of Contents 1, 15 51, 515 supply ceiling diffusers feature a neck mounted rotatable core with either a round or square neck. Aluminum or steel perforated face is available. 2, 52 2FR, 2F supply,
Concentric Supply/Return Diffusers. Models CSR & CSR-P. Redefine your comfort zone.
Concentric Supply/Return Diffusers Models CSR & CSR-P Redefine your comfort zone. www.titus-hvac.com Concentric Supply/Return Diffusers Models CSR & CSR-P Plenum CSR Rectangular Ceiling Diffuser Combination
AFG501 ALUMINUM FEMA 361 LOUVER LOUVER TYPE RECOMMENDED SPECIFICATION
LOUVER TYPE AFG501 ALUMINUM FEMA 361 LOUVER Visible Mullion Louver Type... AFG501 Blade Material... Extruded Aluminum, Alloy 6061-T6 Blade... 0.25 in. (6.35 mm) Frame Material... Formed Aluminum, Alloy
IAQ. ROUND DUCT RETROFIT Model ARR
Non Fan Powered Units ROUND DUCT RETROFIT Model ARR IAQ External Insulation Standard The Carnes Model ARR offers low pressure drop, low sound levels, and valve characteristics which create stable control
CEILING DIFFUSERS CEILING DIFFUSERS
CEILING IFFUSERS "TWISTER" HIGH INUCTION STAMPE FACE The "Twister" diffuser is engineered to optimize air distribution effectiveness. This next generation diffuser has a high induction, 360 swirl pattern
6490, These perforated. ceiling returns feature a. square neck. Aluminum or steel perforated face. is available. 6600, 56600, 6600FR
C Table of Contents 6, 6 6, 6 supply ceiling diffusers feature a neck mounted rotatable core with either a round or square neck. Aluminum or steel perforated face is available. 62, 62 62FR, 629F supply,
Incorporating V2.0. Product spec >>> > Series DD - Double deflection grilles
Incorporating V2.0 Product spec >>> > Series DD - Double deflection grilles Grilles Double deflection Recommended for: Wall, ceiling & duct Supply & extract Overview Enhanced functionality As per the name,
MODEL FF/FFC CEILING AND INLINE/CABINET VENTILATORS
MODEL FF/FFC CEILING AND INLINE/CABINET VENTILATORS APPLICATION The extremely quiet FF and FFC ventilators are used to exhaust air from a variety of commercial and institutional applications, such as restrooms,
Control Dampers. Leakage Performance. Model FDNB (Opposed Blade) FDQB (Parallel Blade) Galvanized 3V Blade Control Dampers
Control s Model FDCB (Opposed Blade) FDHB (Parallel Blade) Aluminum Low Leakage Control s Frame:.081 extruded aluminum Blades:.125 extruded aluminum Bearings: bronze oilite Linkage: *concealed in frame
J1-2. Table of Contents RETURN GRILLES
J1 RETURN GRILLE Table of Contents RETURN GRILLE / These fixedblade return grilles feature 3/4 blade spacing. Deflection will be fixed at 3 or. Available in aluminum or steel construction. / These fixedblade
GRILLES AND REGISTERS
RILLES AND REISTERS DOOR/ TRANSFER RILLES Nailor provides an assortment of door grilles that are designed to be completely sight proof and unobtrusive in appearance. They are constructed using extruded
CONCENTRIC Product Information & Applications
CONCENTRIC Product Information & pplications Concentrics s the leading manufacturer of Concentric Diffusers for the past 30 years, Ruskin Rooftop Systems offers a cost effective way of distributing air
SD-1250 and SD-1600 Series Smoke Dampers
SD-1250 and SD-1600 Series Smoke Dampers Product Bulletin Code No. LIT-1201592 Issued January 30, 2014 Supersedes October 14, 2013 Johnson Controls provides a leakage-rated damper for life safety smoke
for Pleasant & Healthy Air-Distribution ISO 9001:2000 Linear Bar & Floor Grilles Product Bulletin 135-D
for Pleasant & Healthy Air-Distribution ISO 90012000 Product Bulletin 135-D Linear Bar & Floor Grilles Pleasant.. Serene.. YOU & DASCO... Since 1964 Partners for good health INTRODUCTION DASCO Linear Bar
Linear Slot Diffusers Model Slot 20 & Model Slot 25
Model Slot & Model Slot 25 Contents Introduction!!!!!! Page 3 Di"user Specification!!!! Page 4 Air Patterns!!!!!! Page 5 Flange Styles!!!!!! Page 6 Corner Sections!!!!! Page 7 Selection Procedure!!!! Page