SUPPLY ROUND DIFFUSERS TABLE OF CONTENTS ROUND DIFFUSERS. M-2 Excellence in Air Distribution MODELS RM1/5RM1/RM2/5RM2/RM4/5RM4/RA2/RA4
|
|
- Eileen Cummings
- 5 years ago
- Views:
Transcription
1 SUPPLY OUN IFFUSES TBLE OF CONTENTS OUN IFFUSES 1/51 These supply ceiling diffusers discharge horizontally only. They feature three cones with two position settings to control room air induction. 2/52/2 These supply ceiling diffusers discharge both horizontally and vertically. They feature four cones with three position settings (2/52) or may be fully adjustable (2) to control vertical discharge. /5/ These supply ceiling diffusers discharge both horizontally and vertically. They feature four cones (outer antismudge cone) with three position settings (/5) or may be fully adjustable () to control vertical discharge. 2PLQ This supply ceiling diffuser discharges both horizontally and vertically. It features a round plaque face with three position settings available to control vertical discharge. OELS 1/51/2/52//5/2/ Introduction /51 imensional Information & eference Charts /51 Performance ata /52 imensional Information & eference Chart /5 imensional Information & eference Chart imensional Information & eference Chart imensional Information & eference Chart /52//5/2/ eference Charts /52//5/2/ Performance ata Engineering Specifi cations OELS 2PLQ/PLQ Introduction PLQ imensional Information & eference Chart PLQ imensional Information & eference Chart PLQ/PLQ eference Charts PLQ/PLQ Performance ata Engineering Specifi cations OEL 1B1 Introduction & imensional Information B1 eference Charts B1 Performance ata Engineering Specifi cation PLQ This supply ceiling diffuser discharges both horizontally and vertically. It features a round plaque face with an outer anti-smudge cone. There are three position settings available to control vertical discharge. 1B1 This supply ceiling diffuser discharges both horizontally and vertically. It features a ring-operated center downblow adjustment with an anti-smudge outer cone. KUEGE 26-2 Excellence in ir istribution
2 SUPPLY OUN IFFUSES / SEIES CONE IFFUSES INTOUCTION: / SEIES Krueger s / round ceiling diffusers provide excellent performance in variable air volume systems. The round ceiling diffusers have three or four cones depending on model selected to provide a uniform appearance regardless of design specifi cations. Krueger s round ceiling diffusers come in three styles. 1 The fi rst style, 1/51, is used when vertical throw is not needed, but the consumer needs to adjust the room air induction. This is accomplished by utilizing the two position inner cones. t position one, capacity is maximized. In position two, room air induction is increased. The second style, 2/52//5, is used when horizontal and vertical discharge is required. This is accomplished by utilizing the three position inner cones. t position one, capacity is maximized and throw is horizontal. In position two, room air induction is increased and the throw remains horizontal. When set in position three, the air projects vertically from the diffuser. The third style, 2/, is used when horizontal and vertical discharge is required with infi nite adjustability between horizontal and vertical. In the full open setting, capacity is maximized and throw is horizontal. In the full closed setting, air projects vertically from the diffuser. 2 OUN IFFUSES Krueger s round ceiling diffusers come with a safety cable to secure the inner cones after removal. (Safety cable is optional for 12 inlet size or smaller.) OELS OEL 1 - Steel, 3-Cones, Position djustments OEL 51 - luminum, 3-Cones, Position djustments OEL 2 - Steel, -Cones, 3-Position djustments OEL 52 - luminum, -Cones, 3-Position djustments OEL - Steel, -Cones, 3-Position djustments with Large Outer nti-smudge Cone OEL 5 - luminum, -Cones, 3-Position djustments with Large Outer nti-smudge Cone OEL 2 - Steel, -Cones, Fully djustable OEL - luminum, -Cones, Fully djustable, with Large Outer nti-smudge Cone KUEGE 26 FETUES Horizontal Only (1/51) ir istribution Horizontal/Vertical (2/52//5/2/) ir istribution esigned for Heating and Cooling pplications 36 ischarge ir Pattern Excellent Performance in Variable ir Volume Systems esigned for Exposed uct or Hard Ceiling pplications CCESSOIES Optional Safety Cable (12 Inlets or Smaller) Optional ound Straightening Grid FINISHES Standard Finish is British White Optional Finishes vailable - S E IE S Excellence in ir istribution -3
3 SUPPLY OUN IFFUSES 2/52 FOU-CONES 2/52 IENSIONL INFOTION 2/52, COSS SECTION 2/52, POSITIONS 3/" (19) H OUTSIE IETE (C) CEILING OPENING IETE (B) UCT INUS 1/32" (1) POSITION 1 POSITION 2 POSITION 3 OUN IFFUSES 2/52, VILBLE NECK SIZES Nominal ound uct Size Steel (2) Nominal ound uct Size luminum (52) B C Position 1 (Horizontal) Position 3 (Vertical) 6" 6" 12" (35) 13 1/2" (33) 1 7/16" (37) 11/16" (17) 1 5/8" (1) 8" 8" 16" (6) 18" (57) 1 13/16" (6) 7/8" (19) 2 1/8" (5) 1" 1" 2" (58) 22 1/2" (572) 2 1/" (57) 1 1/8" (29) 2 5/8" (67) 12" 12" 2" (635) 27" (686) 2 11/16" (68) 1 1/" (32) 3 1/" (83) 1" 1" 28" (711) 31 1/2" (8) 3 1/8" (79) 1 3/16" (3) 3 3/" (95) 16" 16" 32" (813) 36" (91) 3 5/16" (8) 1 5/16" (33) 1/" (18) 18" 18" 36" (91) 1/2" (129) 3 3/" (95) 1 1/2" (38) 7/8" (12) 2" - " (116) 5" (113) 1/8" (15) 1 5/8" (1) 5 3/8" (137) 2" - 8" (1219) 5" (1372) 7/8" (121) 1 7/8" (8) 6 1/2" (165) 3" - 6" (152) 67 1/2" (1715) 5 9/16" (11) 1 7/8" (8) 8" (23) 36" - 6" (152) 67 1/2" (1715) 5 9/16" (11) 1 7/8" (8) 8" (23) imensions in ( ) are mm. H 2/52 EFEENCE CHT IFLOW VS. NC LEVEL: 2/52 (NO PE) irflow (CF) Neck Size 36" 3" 2" 2" 18" 16" 1" 12" 1" 8" 6" Sound Level, NC KUEGE 26-8 Excellence in ir istribution
4 SUPPLY OUN IFFUSES /5 FOU-CONES WITH NTI-SUGE ING /5 IENSIONL INFOTION /5, COSS SECTION /5, POSITIONS 3/" (19) OUTSIE IETE (C) CEILING OPENING IETE (B) UCT INUS 1/32" (1) POSITION 1 POSITION 2 POSITION 3 /5, VILBLE NECK SIZES Nominal ound uct Size Steel () Nominal ound uct Size luminum (5) Position 1 (Horizontal) Position 3 (Vertical) Ceiling Opening iameter B Outside iameter C 6" 6" 3 1/16" (78) 2 5/16" (59) 7" (178) 17 3/8" (1) 8" 8" 3 15/16" (1) 3" (76) 9" (229) 23 1/" (591) 1" 1" 7/8" (12) 3 3/" (95) 11" (279) 29" (737) 12" 12" 5 15/16" (151) 1/2" (11) 13" (33) 3 7/8" (886) 1" 1" 6 7/8" (175) 15/16" (125) 15" (381) 5/8" (132) 16" 16" 7 9/16" (192) 5 9/16" (11) 17" (32) 6 3/8" (1178) 18" 18" 8 5/8" (219) 6 3/8" (162) 19" (83) 51 3/8" (135) 2" - 9 1/2" (21) 7" (178) 21" (533) 56 1/" (129) 2" /8" (289) 8 3/8" (213) 25" (635) 67 1/2" (1715) imensions in ( ) are mm. OUN IFFUSES /5 EFEENCE CHT IFLOW VS. NC LEVEL: /5 (NO PE) 35 irflow (CF) Neck Size 2" 2" 18" 16" 1" 12" 1" 8" 6" 5 - KUEGE Sound Level, NC 5 Excellence in ir istribution -9
5 SUPPLY OUN IFFUSES 2 FOU-CONES 2 IENSIONL INFOTION 2, COSS SECTION 3/" (19) OUTSIE IETE (C) CEILING OPENING IETE (B) UCT INUS 1/32" (1) H OUN IFFUSES 2, VILBLE NECK SIZES Nominal ound uct Size Ceiling Opening iameter B Outside iameter C Position 1 (Horizontal) Position 3 (Vertical) 6" 12" (35) 13 1/2" (33) 1 7/16" (37) 11/16" (17) 1 5/8" (1) - 8" 16" (6) 18" (57) 1 13/16" (6) 7/8" (19) 2 1/8" (5) - 1" 2" (58) 22 1/2" (572) 2 1/" (57) 1 1/8" (29) 2 5/8" (67) - 12" 2" (635) 27" (686) 2 11/16" (68) 1 1/" (32) 3 1/" (83) - 1" 28" (711) 31 1/2" (8) 3 1/8" (79) 1 3/16" (3) 3 3/" (95) 2 1/2" (6) 16" 32" (813) 36" (91) 3 5/16" (8) 1 5/16" (33) 1/" (18) 2 5/8" (67) 18" 36" (91) 1/2" (129) 3 3/" (95) 1 1/2" (38) 7/8" (12) 2 3/" (7) 2" " (116) 5" (113) 1/8 (15) 1 5/8" (1) 5 3/8" (137) 3" (76) 2" 8" (1219) 5" (1372) 7/8" (121) 1 7/8" (8) 6 1/2" (165) 3 1/8" (79) 3" 6" (152) 67 1/2" (1715) 5 9/16" (11) 1 7/8" (8) 8" (23) 3/8" (111) 36" 6" (152) 67 1/2" (1715) 5 9/16" (11) 1 7/8" (8) 8" (23) 3/8" (111) imensions in ( ) are mm. H P 2 EFEENCE CHT IFLOW VS. NC LEVEL: 2 (NO PE) 7 65 irflow (CF) Neck Size 36" 3" 2" 2" 18" 16" 1" 12" 1" 8" 6" Sound Level, NC KUEGE 26-1 Excellence in ir istribution
6 SUPPLY OUN IFFUSES FOU-CONES WITH NTI-SUGE ING IENSIONL INFOTION, COSS SECTION P 3/" (19) OUTSIE IETE (C) CEILING OPENING IETE (B) UCT INUS 1/32" (1), VILBLE NECK SIZES Nominal ound uct Size Position 1 (Horizontal) Position 3 (Vertical) P Ceiling Opening iameter B Outside iameter C 6" 3 1/16" (78) 2 5/16" (59) - 7" (178) 17 3/8" (1) 8" 3 15/16" (1) 3" (76) - 9" (229) 23 1/" (591) 1" 7/8" (12) 3 3/" (95) - 11" (279) 29" (737) 12" 5 15/16" (151) 1/2" (11) - 13" (33) 3 7/8" (886) 1" 6 7/8" (175) 15/16" (125) 2 1/2" (6) 15" (381) 5/8" (132) 16" 7 9/16" (192) 5 9/16" (11) 2 5/8" (67) 17" (32) 6 3/8" (1178) 18" 8 5/8" (219) 6 3/8" (162) 2 3/" (7) 19" (83) 51 3/8" (135) 2" 9 1/2" (21) 7" (178) 3 1/2" (89) 21" (533) 56 1/" (129) 2" 11 3/8" (289) 8 3/8" (213) 3 1/8" (79) 25" (635) 67 1/2" (1715) imensions in ( ) are mm. OUN IFFUSES EFEENCE CHT IFLOW VS. NC LEVEL: (NO PE) 35 irflow (CF) Neck Size 2" 2" 18" 16" 1" 12" 1" 8" 6" 5 KUEGE Sound Level, NC Excellence in ir istribution -11
7 SUPPLY OUN IFFUSES 2//2/ SEIES FOU-CONES 2/52//5/2/ EFEENCE CHTS: HOIZONTL THOW IFFUSE SPCING FO 8% PI: 2/52//5/2/, 6 NECK (NO PE) 2 OUN IFFUSES 1/2 Unit Separation istance, L 15 NC= CF/Sq.Ft. CF ange IFFUSE SPCING FO 8% PI: 2/52//5/2/, 1 NECK (NO PE) 5 5 1/2 Unit Separation istance, L NC=1 CF ange CF/Sq.Ft. Charts are at 2 BTUH/ft 2 loads. See the Engineering section of this catalog for instructions on how to read these charts and additional PI information. KUEGE Excellence in ir istribution
8 SUPPLY OUN IFFUSES 2//2/ SEIES FOU-CONES KUEGE 26 2/52//5/2/ PEFONCE T: HOIZONTL/VETICL THOW IP/ETIC T: 2/52//5/2/ (NO PE) IP ata Excellence in ir istribution etric ata Neck ir Horizontal Vertical Horizontal Vertical Projection HZ VT Neck ir Horizontal Vertical Horizontal Vertical Projection Vel Flow Ps Pt Ps Pt Throw 1ºF 2ºF 3ºF ºF Vel Flow Ps Pv Pt Pt Throw 5ºC 11ºC 17ºC 22ºC FP CF "WG "WG "WG "WG ft ft ft ft ft NC NC m/s L/s Pa Pa Pa Pa m m m m m " ia " ia " ia " ia " ia " ia Throw values are given terminal velocities of 15, 1, and 5 FP (.75,.5, and.25 m/s). Horizontal throw values are given for isothermal conditions. Vertical throw values are for a terminal velocity of 5 FP at the temperature differences shown. NC values are based on octave band 2-7 sound power levels minus a room absorption of 1dB, re 1-12 watts. ash (-) in space denotes a NC value of less than 1. ata was obtained from tests conducted in accordance with NSI/SHE Standard 7, ISO Standard 5219, and ISO Standard 371. See K-Select program for performance data not shown, including octave band data. -13 OUN IFFUSES -
9 SUPPLY OUN IFFUSES 2//2/ SEIES FOU-CONES 2/52//5/2/ PEFONCE T: HOIZONTL/VETICL THOW OUN IFFUSES - IP/ETIC T: 2/52//5/2/ (NO PE) IP ata etric ata Neck ir Horizontal Vertical Horizontal Vertical Projection HZ VT Neck ir Horizontal Vertical Horizontal Vertical Projection Vel Flow Ps Pt Ps Pt Throw 1ºF 2ºF 3ºF ºF Vel Flow Ps Pv Pt Pt Throw 5ºC 11ºC 17ºC 22ºC FP CF "WG "WG "WG "WG ft ft ft ft ft NC NC m/s L/s Pa Pa Pa Pa m m m m m " ia " ia " ia " ia " ia Throw values are given terminal velocities of 15, 1, and 5 FP (.75,.5, and.25 m/s). Horizontal throw values are given for isothermal conditions. Vertical throw values are for a terminal velocity of 5 FP at the temperature differences shown. NC values are based on octave band 2-7 sound power levels minus a room absorption of 1dB, re 1-12 watts. ash (-) in space denotes a NC value of less than 1. ata was obtained from tests conducted in accordance with NSI/SHE Standard 7, ISO Standard 5219, and ISO Standard 371. See K-Select program for performance data not shown, including octave band data. KUEGE 26-1 Excellence in ir istribution
10 SUPPLY OUN IFFUSES 2//2/ SEIES FOU-CONES 2/52//5/2/ SUGGESTE SPECIFICTION & CONFIGUTION OUN IFFUSES 2/52//5 The round ceiling diffuser shall be Krueger model 2 (steel) or 52 (aluminum). The 2 and 52 models shall be constructed of -cones. The inner 3-cone assembly shall be adjustable to provide 3 different discharge settings from horizontal to vertical and be easily removable using a spring locking mechanism. The removable core shall be supported by a safety cable to provide ease of installation and maintenance for neck sizes 1 and larger. iffusers shall be constructed of 18 gage steel (2) or.51 aluminum (52). deep, one-piece outer cone shall be provided for the enhancement to the anti-smudge characteristics of the (steel) and 5 (aluminum) series. Optional round damper shall be constructed of heavy gage steel. amper shall be operable from the face of the diffuser. 2/ The round ceiling diffuser shall be Krueger model 2. The 2 model shall be constructed of -cones. The inner 3-cone assembly shall be fully adjustable by rotating the center cone to modify the discharge air setting from horizontal to vertical and be easily removable using a spring locking mechanism. The removable core shall be supported by a safety cable to provide ease of installation and maintenance for neck sizes 1 and larger. iffusers shall be constructed of 18 gage steel. deep, one-piece outer cone shall be provided for the enhancement to the anti-smudge characteristics of the series. Optional round damper shall be constructed of heavy gage steel. amper shall be operable from the face of the diffuser. 1. SEIES: (XXXX) 2-3-Position ound, Steel iffuser - 3-Position ound, nti-smudge Steel iffuser 52-3-Position ound, luminum iffuser 5-3-Position ound, nti-smudge luminum iffuser 2 - djustable ound, Steel iffuser - djustable ound, nti-smudge Steel iffuser 2. INLET: (XX) * 6-2 in 2 Increments, 2, 3, or PE: (XX) - NONE 3 - P1 - P1 6 - P PN1. CCESSOIES: (XX) ** - No ccessories C - Safety Cable - ound Straightening Grid 5. FINISH: (XX) 1 - ill 1 - lumican 35 - Black - British White (*) Largest inlet size available for & is 2. Largest inlet size available for 52 & 5 is 18. (**) Safety cable included on all units with 1 or greater neck size. PEFONCE The manufacturer shall provide published (printed or electronic) performance data for the diffuser. Performance data shall include 2-7 octave band sound power levels. The diffuser shall be tested in accordance to the data standards at the time of product introduction or NSI/SHE Standard 7. - FINISH The paint fi nish shall be # White and be an anodic acrylic paint, baked at 315 F for 3 minutes. The paint thickness shall be.8 1. mils, gloss at 6 per ST of 5 85%, pencil hardness per ST of HB H, crosshatch adhesion per ST of B 5B, impact per ST of direct impact >1 in/lb and reverse impact >8 in/lb, salt spray per ST B of 96 hours, humidity per ST of >5 hours and water soak per ST of 25 hours. SPLE CONFIGUTION: KUEGE Excellence in ir istribution
ROUND DIFFUSERS G1. RM, RA Series Cone Diffusers. Introduction: RM, RA Series ROUND DIFFUSERS R M - R A S E R I E S
OUND DIFFUSES G, A Series Cone Diffusers Introduction:, A Series Krueger s /A round ceiling diffusers provide excellent performance in variable air volume systems. The round ceiling diffusers have three
More informationD1-2. Table of Contents MODULAR CORE DIFFUSERS. 1240, Introduction & Product Description... D1-3. Dimensional Information...
D Table of Contents, These supply, ceiling diffusers feature four handremovable modular cores. Available in steel or aluminum construction. P, P These supply, ceiling diffusers feature four handremovable
More informationA1-2. Table of Contents ARCHITECTURAL & PLAQUE DIFFUSERS
A1 Table of Contents PRIM features an arcuate faceplate. Center square appliqué offers nine standard colors to match interior décor. PLQ & 5PLQ features a square plaque faceplate. PLQR features a round
More informationL1-2. Table of Contents SECURITY GRILLES 1310, 1310TF, Introduction & Dimensional Information... L1-13
L Table of Contents 0, 0TF & 50 These perforated face supply grilles feature 5/6 diameter holes on 7/6 staggered centers. This perforated face supply grille features /6 diameter holes on 9/2 staggered
More informationB1-2. Table of Contents LOUVERED FACE DIFFUSERS
Table of Contents 2, FR,, M & M feature a round neck and four cones. & feature a round neck, four cones, and adjustable pattern controllers.,, M, & M feature a round neck and three cones. & feature a round
More informationCRNRR, 5CRNRR These concentric ring nozzles feature a stub duct mounting frame for smaller duct work
H1 AI NOZZLES & OUN GILLES Table of Contents AI NOZZLES & OUN GILLES PN This round punkah nozzle features a surface mounting frame. PN This round punkah nozzle features a stub duct mounting frame. PN This
More informationB1-2. Table of Contents LOUVERED FACE DIFFUSERS
B1 LOUEED FACE DIFFUE Table of Contents LOUEED FACE DIFFUE B12 1400, 1400F, 1400, M1400 & M1400 feature a round neck and four cones. 1400A & 1400A feature a round neck, four cones, and adjustable pattern
More informationK1-2. Table of Contents LINEAR BAR GRILLES 1500, 1500MC, 1800, 1800MC
K Table of Contents, This series of extruded aluminum supply and return linear bar grilles are for ceiling, sidewall, sill (), and floor () applications. Blade thickness is 7/32., This series of extruded
More information6490, These perforated. ceiling returns feature a. square neck. Aluminum or steel perforated face. is available. 6600, 56600, 6600FR
C Table of Contents 6, 6 6, 6 supply ceiling diffusers feature a neck mounted rotatable core with either a round or square neck. Aluminum or steel perforated face is available. 62, 62 62FR, 629F supply,
More information6490, These perforated. ceiling returns feature a. square neck. Aluminum or steel perforated face. is available. 6600, 56600, 6600FR
C1 Table of Contents 1, 15 51, 515 supply ceiling diffusers feature a neck mounted rotatable core with either a round or square neck. Aluminum or steel perforated face is available. 2, 52 2FR, 2F supply,
More informationB1-2. Table of Contents LOUVERED FACE DIFFUSERS
1 LOUVERED FACE DIFFUER Table of Contents LOUVERED FACE DIFFUER 12 1400, 1400FR, 1400, M1400 & M1400 These supply diffusers feature a round neck and four cones. 1400A & 1400A These supply diffusers feature
More informationJ1-2. Table of Contents RETURN GRILLES
J1 RETURN GRILLE Table of Contents RETURN GRILLE / These fixedblade return grilles feature 3/4 blade spacing. Deflection will be fixed at 3 or. Available in aluminum or steel construction. / These fixedblade
More informationJ1-2. Table of Contents RETURN GRILLES
J1 RETURN GRILLE Table of Contents RETURN GRILLE / These fixedblade return grilles feature 3/4 blade spacing. Deflection will be fixed at 3 or. Available in aluminum or steel construction. / These fixedblade
More informationM1-2. Table of Contents INDUSTRIAL GRILLES. 680, 5680, 6880, 56880, 680MP, 5680MP Introduction... M1-3 Dimensional Data... M1-4
1 Table of Contents & These industrial supply grilles feature adjustable, single deflection, extruded aluminum airfoil blades with a steel or extruded aluminum frame. Horizontal or vertical blades at 1
More informationMODULAR CORE CEILING DIFFUSERS
MOEL SQUARE 12345-10 MOULAR CORE SQUARE IFFUSERS ROUN NECK SQUARE 1, 2, 3 OR ROUN 4-WAY AJUSTABLE NECK SQUARE ISCHARGE ROUN PATTERN NECK Steel Model: 7500 Suffix '-O' adds a steel opposed blade damper
More information4880 This heavy duty, double deflection, supply grille features 1/2 front and 3/4 back blade. spacing. Available in steel construction only.
I1I Table of Contents 1/51 1M/51M These supply grilles feature individually adjustable curved blades. Available in steel or aluminum construction. /5 These single deflection supply grilles feature 3/ blade
More informationRPD ROUND PLAQUE DIFFUSER
ROUND PLAQUE DIFFUSER s (RPD) provide a balance between engineering and architectural needs, with a flush appearance and superior VAV performance in both ceiling and exposed duct mounting applications.
More informationCEILING DIFFUSERS CEILING DIFFUSERS
CEILING IFFUSERS "TWISTER" HIGH INUCTION STAMPE FACE The "Twister" diffuser is engineered to optimize air distribution effectiveness. This next generation diffuser has a high induction, 360 swirl pattern
More informationD3-2. Table of Contents DISPLACEMENT VENTILATION
D3 Table of Contents This rectangular unit is ideal for wall or ceiling installations. B The U-shaped 180 discharge pattern and high capacity is ideal for retail spaces, commercial, or lobbies. ENGINEERING
More informationPERFORATED CEILING DIFFUSERS
PERFORAE MOEL PERFORAE 12345-10 CEILING SQUARE IFFUSERS ROUN NECK SQUARE ROUN NECK SUPPLY SQUARE 1, 2, 3 OR ROUN 4-WAY AJUSABLE NECK ISCHARGE PAERN Steel Models: 4320 Flush Face 4325 rop Face Aluminum
More informationPERFORATED CEILING DIFFUSERS
PERFORAE PERFORAE CURVE MOEL BLAE 12345-10 IFFUSERS SQUARE ROUN NECK SQUARE SUPPLYROUN NECK 4-WAY AJUSABLE ISCHARGE SQUARE ROUN NECK PAERN (SANAR) 1, 2 OR 3-WAY ISCHARGE PAERN (OPIONAL) Steel Models: 4320CB
More informationISSUE B, OCT Architectural Square Ceiling Diffusers. UNI & AUNI Diffusers. Advanced Air
ISSUE B, OCT 2009 Architectural Square Ceiling Diffusers UNI & AUNI Diffusers Product Overview - Uni Series Architectural Ceiling Diffusers Uni Series High Performance Square Face Round Neck The Model
More informationUNDERFLOOR PRODUCTS E3
E3 Introduction: Krueger s round diffusers are designed to seamlessly integrate into any underfloor installation. The units are made of a durable and long lasting cast aluminum construction. The can be
More informationSquare/Rect. and Square Louvered Face and Plaque Face Diffuser
/Rect. and Louvered Face and Plaque Face Diffuser Series J: Easily Adjustable from Horizontal to Vertical Vertical Discharge Application: Carnes steel (SK) and aluminum (SE) louvered face diffusers are
More informationCEILING DIFFUSERS CEILING DIFFUSERS
CEILING IFFUSERS "TWISTER" HIGH INUCTION STAMPE FACE The "Twister" diffuser is engineered to optimize air distribution effectiveness. This next generation diffuser has a high induction, 360 swirl pattern
More informationCEILING DIFFUSERS Previous View Home Contents Dimensions Specification Performance
1 Contents Page No. General Product Overview 5 Exclusive Steel Grille, Register and iffuser Warranty 12 Square and Rectangular Pattern Ceiling iffusers 6500 - Steel - Fixed Pattern 13 6550 - Steel - djustable
More informationF1-2. Table of Contents PLENUM SLOT DIFFUSERS PTBS. Introduction & Dimensional Information... F1-3. Accessories... F1-54. Reference Charts...
F1 LENUM LO DIFFUE able of ontents his plenum slot supply diffuser features an adjustable blade. lots: 1 to 4 lot Widths: ¾, 1, 1½ Introduction & Dimensional Information... F13 Accessories... F15 eference
More informationCEILING DIFFUSERS GENERAL PRODUCT OVERVIEW
CEILING IFFUSERS CEILING IFFUSERS GENERAL PROUCT OVERVIEW Ceiling iffusers Quality Assured Products, unobtrusive clean lines for appearance, careful engineering and professional workmanship with the backing
More informationCEILING DIFFUSERS GENERAL PRODUCT OVERVIEW
GENERAL PROUCT OVERVIEW Ceiling iffusers Quality Assured Products, unobtrusive clean lines for appearance, careful engineering and professional workmanship with the backing of an industry leader - these
More informationCEILING DIFFUSERS. Supply Air
Perforated Ceiling iffusers Nailor manufactures a full range of supply air and matching return air Perforated Ceiling iffusers. he perforated face is available in both corrosion-resistant steel and aluminum,
More informationINDEX. Chapter1 0. air master. Round Ceiling Diffusers
air master Chapter1 0 INDEX A. Round ceiling diffusers 1. Fixed round ceiling diffuser...: ARDF...10.1 2. Round ceiling diffuser with adjustable pattern...: ARD...10.2 Standard sizes...10.3 Air pattern...10.3
More informationLINEAR DIFFUSERS AND BAR GRILLES
49-240 48LL1 49-280 49-480 48LL2 Linear ar Grilles The Nailor 4900 Series provides an extruded aluminum bar grille that offers beautiful styling and efficient performance. Linear bar grilles offer a choice
More informationCEILING DIFFUSERS CEILING DIFFUSERS
Model 4340M Model 4330CB Premium, Curved Blade Pattern Controllers The perforated diffusers in this series have an extruded aluminum frame with a narrow border that is visible within the T-Bar module.
More informationCEILING DIFFUSERS GENERAL PRODUCT OVERVIEW
GENERAL PROUCT OVERVIEW Ceiling iffusers Quality Assured Products, unobtrusive clean lines for appearance, careful engineering and professional workmanship with the backing of an industry leader - these
More informationSPD SQUARE PLAQUE DIFFUSER
SQUARE PLAQUE DIFFUSER The (SPD) has a flush appearance, making it ideal for architecturally-conscience commercial spaces, and provides industry-leading low pressure drop and sound generation with a 360
More informationCEILING DIFFUSERS CEILING DIFFUSERS
"TWISTER" HIGH INUCTION STAMPE FACE The "Twister" diffuser is engineered to optimize air distribution effectiveness. This next generation diffuser has a high induction, 360 swirl pattern for a superior
More informationCEILING DIFFUSERS CEILING DIFFUSERS. Aluminum Construction Model 6300R See Page D135. Fully Adjustable Horizontal/Vertical Pattern
6 Model TWR "Twister" High Induction Stamped Face The "Twister" diffuser is engineered to optimize air distribution effectiveness. This next generation diffuser has a high induction, 360 swirl pattern
More information500-YCI SERIES FAN-POWERED AIR TERMINAL UNIT FORM EG2 (404)
500-YCI SERIES FAN-POWERED AIR TERMINAL UNIT Table of Contents General Information...3 500-YCI Features...4-5 Dimensional Data...6-7 ARI Rating Points...8 Statement of Standard Test Conformity...8 Motor
More informationCEILING DIFFUSERS D12 CEILING DIFFUSERS
PREMIUM This perforated return has an extruded aluminum frame with a narrow border that is visible within the T-Bar module. See Model Series 4330 and 4330CB for the matching supply air diffusers. Flush
More informationPATTERN CEILING DIFFUSERS
PATTERN CEILING IFFUSERS Model 4260 Model 7500 Eggcrate Return This aluminum face return diffuser features 1/2" x 1/2" x 1/2" (13 x 13 x 13) eggcrate that provides a high free area. It is offered with
More informationRETROFIT TERMINAL UNITS
GENERAL PROUCT OVERVIEW Retrofit Terminal s Convert Constant Air Volume Systems to Variable Air Volume. Convert Constant Volume ual uct Systems to Variable Air Volume. Convert Multizone Systems to Variable
More informationFALCON Ceiling. Circular ceiling air diffuser for supply air QUICK FACTS
Circular ceiling air diffuser for supply air QUICK FACTS Manages large supply airflows Horizontal or vertical distribution pattern Provision for motorised adjustment of the distribution pattern Suitable
More informationVAV TERMINAL UNITS. VVD VAV Diffusers
Introduction ASLI VAV diffusers, VVD are variable air volume diffuser for supply air in variable air volume system. In many conventional HVAC systems, multiple work spaces are controlled by a single thermostat.
More informationfsfdfsdfsdfssfsf OMNI DIFFUSER
fsfdfsdfsdfssfsf OMNI DIFFUSER Architectural Ceiling Diffusers diffusers OMNI The Titus OMNI diffuser satisfies architectural as well as engineering criteria. Its strong, clean, unobtrusive lines harmonize
More informationCEILING DIFFUSERS CEILING DIFFUSERS. Aluminum Construction Model 6300R See Page D135. Fully Adjustable Horizontal/Vertical Pattern
6 Model TWR "Twister" High Induction Stamped Face The "Twister" diffuser is engineered to optimize air distribution effectiveness. This next generation diffuser has a high induction, 360 swirl pattern
More information500-YVI PARALLEL FAN-POWERED AIR TERMINAL UNIT FORM EG3 (404)
500-YVI PARALLEL FAN-POWERED AIR TERMINAL UNIT Table of Contents Introduction...3 500-YVI Features...4-5 Dimensional Data...6-7 ARI Rating Points...8 Statement of Standard Test Conformity...8 Motor Amperage
More informationSeries DD & SD-20 Supply Grilles & Registers
Series DD & SD-20 Supply Grilles & Registers Grille - Two Sets of Louver Blades Model DDL-20 Two sets of louver blades. Front set parallel to long dimension. Rear set parallel to short dimension. All louver
More informationLINEAR SLOT DIFFUSERS PLENUMS
LINEAR SLOT DIFFUSER PLENUMS ADAPTORS FOR MODEL SERIES 5000 LINEAR SLOT CEILING DIFFUSERS Standard Models: 5350(I) 1/2" (13) Slot 5375(I) 3/4" (19) Slot 5310(I) 1" (25) Slot Modified Performance Models:
More informationC2-2. Table of Contents DUAL DUCT TERMINAL UNITS
C2 UA UCT TERINA UNITS Table of Contents UA UCT TERINA UNITS This unit features a compact design for variable volume applications where blending of hot and cold air is not required. T This unit features
More informationOptima EXHAUST GRILL AND AIR LOUVER. Perforated Ceiling Diffusers. Features: Standard square sizes:
Perforated Ceiling Diffusers OPTIMA ceiling diffuser with perforated face, are recoended for heating, ventilating and cooling in centralized air conditioning systems. Perforated face diffusers, with 4-3-
More informationSPD/SPDV SPD SPDV. High Velocity/High Aspiration Air Outlet. Construction
SPD/SPDV SPD O D-1/8 C Saturn Plaque Diffuser US Patent B H SPDV SPD Dimensions in Inches MODEL A B C D H O SPD-04 7-1/2 2 1-1/4 4 3-3/4 5-1/8 SPD-06 10 2 1-3/16 6 4 7-1/2 SPD-08 12 2 1-3/16 8 4 9-1/2
More informationCONCENTRIC Product Information & Applications
CONCENTRIC Product Information & pplications Concentrics s the leading manufacturer of Concentric Diffusers for the past 30 years, Ruskin Rooftop Systems offers a cost effective way of distributing air
More informationPerforated Face Ceiling Diffusers
February 2011 Perforated Face Ceiling Diffusers Perforated Face Ceiling Diffuser Models PD, DFP and DPP Features NEW DROP PLQUE DESIGN 3 Model Types 1, 2, 3 or 4 way ir Patterns Extruded luminium Sections
More informationE3-22. FDD Round Diffuser, Displacement Air Pattern. Introduction: FDD UNDERFLOOR PRODUCTS F D D
E3 UNERLOOR PROUCTS Round iffuser, isplacement Air Pattern Introduction: Krueger s round displacement diffusers are designed to seamlessly integrate into any underfloor installation and can supplement
More information2/6.1/EN/1. High Induction. Variable / Constant Volume Swirl Diffuser Types HIVV HICV
2/6.1/EN/1 High Induction Variable / Constant Volume Swirl Diffuser Types HIVV HICV Contents Description Description... Specification Dimensions... HIVV-E Operation... Quick Selection Table... Technical
More informationseries RVV Variable flow rate controllers
series RVV Variable flow rate controllers www.koolair.com Series RVV 1 CONTENTS Variable flow rate controllers, type RVV Description 2 Dimensions and product code 3 Selection tables 4 Variable flow rate
More information(click on page links below) General & Performance Data 1. Suggested Spec 3. Accessories 4
HAR Variable Air Volume Diffusers Contents: (click on page links below) General & Performance Data 1 Suggested Spec 3 Accessories 4 AUCKLAND ph 09 279 5250 fax 09 275 5637 sales@temperzone.co.nz WELLINGTON
More informationMulticore diffusers. introduction. type control. options. finish. sizes SQUARE AND RECTANGULAR DIFFUSERS
SQUARE AND RECTANGULAR DIFFUSERS introduction The IC diffuser is a versatile form of air terminal offering the facility of multi directional throw patterns in a wide range of frame sizes. Each core style
More informationDFB - Conical Ceiling Diffuser. Halton DFB. Conical Ceiling Diffuser
Halton DFB Conical Ceiling Diffuser Horizontal air supply, suitable also for exhaust Installation flush to the ceiling, light-weight aluminium design Circular duct connection with rubber gasket All sizes
More informationC O L M A N. Air Distribution PERFORATED FACE DIFFUSERS P SERIES SERIES
C O L M A N Air Distribution E N G I N E E R E D A I R P R O D U C T S PERFORATED FACE DIFFUSERS P SERIES P SERIES PERFORATED FACE DIFFUSERS P SERIES QUALITY AND EFFICIENCY WITHOUT COMPROMISE Application:
More informationPELICANTM. Wall. Rectangular perforated wall air diffusers for supply air. Quick guide
PELICANTM Wall Rectangular perforated wall air diffusers for supply air Quick facts Flexible air distribution pattern, easy to set Cleanable, removable damper Simple commissioning, fixed measurement tapping
More informationC O L M A N. Air Distribution SWIRL DIFFUSERS DWT SERIES DWT SERIES
C O L M A N Air Distribution E N G I N E E R E D A I R P R O D U C T S SWIRL DIFFUSERS DWT SERIES DWT SERIES DISTRIBUTION PATTERNS & FIXING OPTIONS Application The DWT Series of swirl diffusers have been
More informationVAV RETROFIT/BYPASS TERMINAL UNITS TABLE OF CONTENTS RETROFIT/BYPASS TERMINAL UNITS. E-2 Excellence in Air Distribution MODEL RVE MODEL KLB MODEL SVE
TALE OF CONTENTS RETROFIT/YPASS TERMINAL UNITS RVE This retrofi t terminal unit is designed to convert high pressure mechanical constant volume systems to low pressure variable volume systems and also
More informationLINEAR DIFFUSERS AND BAR GRILLES
LINEAR DIFFUSERS AND AR GRILLES LINEAR DIFFUSERS AND AR GRILLES LINEAR SLOT DIFFUSER PLENUMS FOR TECHZONE TYPE CEILINGS Model Series 5300TZ Plenums are designed to fit the 5000TZ Series Slot Diffusers.
More informationLINEAR BAR GRILLES. GRILLES-Linear Bar
LINEAR BAR GRILLES A range of linear bar grilles with horizontal blades at either 0, 15, 0 or 45 deflection and fixed or removable cores. Usually used in sidewall applications, but they are also designed
More information500-YH SINGLE DUCT AIR TERMINAL UNIT FORM EG1 (1101)
500-YH SINGLE DUCT AIR TERMINAL UNIT FORM 130.12-EG1 (1101) Table of Contents General Description.......................................................................3 500-YH Features........................................................................4-5
More informationLAMINAR FLOW DIFFUSER Model DLAB
Laminar & Radial Flow Diffuser LAMINAR FLOW DIFFUSER Model DLAB Application Laminar Flow diffusers are used to deliver air to surface directly underneath in a non-aspirating air pattern, with the minimum
More informationSERIES GD. Square and Circular Fixed Swirl Diffusers
SERIES G Square and ircular Fixed Swirl iffusers PULITION IFFUSERS 18 MY 2018 Features - istinctive architecturally appealing designs - Two swirl pattern options - order styles compatible with modern ceiling
More informationEYELASH DIFFUSERS E SERIES. Quality and efficiency without compromise
EYELASH DIFFUSERS E SERIES Quality and efficiency without compromise Weltech Business Centre - Ridgeway - Welwyn Garden City - Hertfordshire AL7 2AA Tel: 01707 71526 - Fax: 01707 71 527 - email sales@jprservices.co.uk
More informationLOUVERED FACE GRILLES AND REGISTERS
Performance Notes for Supply rilles and Registers, 6 and 67 Series Throw, Spread and Drop The isovel diagrams shown below, illustrate in plan view, the relationship of horizontal spread to throw for three
More informationDCG Adjustable Aluminum Round Diffusers
51 DCG Adjustable Aluminum Round Diffusers H V A C TM Rev 27-05-2018 52 DCG SEries Aluminum Adjustable Round Diffusers Adjust core up and down to move from horizontal to vertical airflow Architecturally
More informationDFA - Conical Ceiling Diffuser. Halton DFA. Conical Ceiling Diffuser
Halton DFA Conical Ceiling Diffuser Horizontal air supply, suitable also for exhaust Installation flush to the ceiling, light-weight aluminium design Circular duct connection with rubber gasket Openable
More informationKEY FEATURES. Product Overview. Product Line Drawing
Main Valves Options Model 106-C 106-PG-C Globe KEY FETURES Solves high pressure drop problems Controls variable flows & vibration Significantly reduces noise Self-contained actuators not required Customizable
More informationFAN POWERED TERMINAL UNITS
POWERE TERMINAL UNITS MOEL SERIES 134-10 FLOW CONSTANT VOLUME SQUARE ROUN NECK W/ OUTSIE INLET (OAI) SQUARE ROUN NECK 3S-OAI & 3SST-OAI SERIES SQUARE ROUN NECK MINIMUM VENTILATION 'IAQ' APPLICATIONS Models:
More informationWall and Ceiling Grille
September 14 Wall and Ceiling Grille Models SD, DD, EC, PG, G45, NVG, NB, GN, WB and GW Single and Double Deflection Fixed and Removable Core Eggcrate Perforated Grille 45 Fixed Blade Non Vision Bar Grilles
More informationEAGLE Wall. Wall air diffusers with discs for supply air and flush mounting QUICK FACTS
Wall air diffusers with discs for supply air and flush mounting QUICK FACTS Rotatable discs % flexible distribution pattern Cleanable Adjustable slot for enhanced capacity Simple adjustment Used together
More informationTCM - Conical Ceiling Diffuser. Halton TCM. Conical Ceiling Diffuser
Halton TCM Conical Ceiling Diffuser Horizontal air supply, suitable also for exhaust Suitable for cooling applications with supply/room air temperature difference as low as -12 C Installation flush to
More informationWall air diffusers with discs for supply air and flush mounting. Quick guide COLIBRI WALL
Wall air diffusers with discs for supply air and flush mounting General Rectangular supply air diffusers with rotatable discs. The disc technique enables supply of air above or below room temperature as
More informationFAN POWERED TERMINAL UNITS
Benefits: Fan powered terminals are typically used for heating and cooling of perimeter zones. Operating cost savings can be achieved through the use of waste heat recovery from the ceiling plenum and
More informationApplication Guidelines
Grilles and Registers Application Guidelines Introduction Overview It is the intent of this section to give some basic application guidelines for the use of supply and return grilles and registers in a
More informationCUSTOM FLOW ARCHITECTURAL SLOT DIFFUSER
ARCHITECTURAL SLOT DIFFUSER Custom Flow (CF) slot diffusers are uniquely designed for curving and long continuous installations. The CF offers a large range of airflow flexibility with one or two slot
More informationVAV TERMINAL UNIT KYODO-ALLIED TECHNOLOGY PTE LTD
VAV TERMINAL UNIT KYODO-ALLIED TECHNOLOGY PTE LTD R CONTENTS MODEL: KYODO / KYODO-R... 1 INTRODUCTION... 1 APPLICATION... 1 VARIABLE AIR VOLUME SYSTEM... 1 FEATURES... 2 MATERIALS... 3 AIR VOLUME CONTROL
More informationProduct Data. Features/Benefits. 35K Bypass Terminal. 110 to 4400 cfm
Product Data 35K Bypass Terminal 110 to 4400 cfm Carrier s 35K Series bypass terminals offer: 20-gage, galvanized steel casing construction 1/2-in. thick, dual density fiberglass insulation meeting NFPA
More informationFan Powered Terminal Units FPV, FDV Series Variable Volume Parallel Flow
Recommended Air Volume Ranges CP 101 Unit Size L/s Min.* L/s Max. cfm Min.* cfm Max. 6 31 212 66 450 8 62 378 132 800 10 104 637 221 1350 12 146 991 310 2100 14 207 1416 439 3000 16 268 1888 568 4000 CP
More informationPremium Correctional Air Distribution. The First Name in Air Diffusion.
Premium Correctional Air Distribution The First Name in Air Diffusion www.anemostat.com PRODUCT DIRECTORY APPLICATIONS Stainless Steel S-Vent MAXIMUM SECURITY GRILLES NEW CONSTRUCTION page 16 page 4 &
More informationDRUM LOUVERS DRUM LOUVERS 45DL SERIES. Models: 45DL1 Single Vanes 45DL2 Split Vanes G151 HIGH CAPACITY LONG THROW ALUMINUM CONSTRUCTION
DRUM LOUVERS 45DL SERIES HIH CAPACITY LON THROW ALUMINUM CONSTRUCTION Models: Single Vanes 45DL2 Split Vanes Suffix '-O' adds a steel opposed blade damper Models -O and 45DL2 Model Series 45DL Drum Louvers
More informationCatalogue. FlowBar. High Capacity Slot Diffuser.
Catalogue FlowBar High Capacity Slot Diffuser www.air-diffusion.co.uk sales@air-diffusion.co.uk Content Introduction... 4 Diffuser Specification... 5 Air Patterns... 6 Flange Styles... 7 Curved Sections...
More informationEGG CRATE RETURN GRILLE
80 EGG CRATE RETURN GRILLE 80 The 80 Series is available in various mounting styles and features sturdy construction, consisting of a heavy gauge aluminum grid core, optional extruded aluminum borders
More informationFixed Pitch Vane Axial Fan
Fixed Pitch Vane Axial Fan Page Introduction...........................................2 Construction Features...................................3 Mounting Options.......................................3
More informationSECURITY PRODUCTS GENERAL PRODUCT OVERVIEW. Security Products
GENERAL PRODUCT OVERVIEW Security Products Nailor offers a complete line of Security Grilles, Registers and Diffusers. The product line includes grilles and registers for maximum, medium and minimum security
More informationCentriflow Plus EC. Technical data
Technical data Centriflow Plus CTLOGUE Contents General description...3 General survey chart...4 Design description Fan Impeller...5 Inlet cone and supporting frame...5 EC motor...5 ir flow sensor...6
More informationSINGLE DUCT TERMINAL UNITS 30X/HQX SERIES
30X/HQX SERIES 30X SERIES EXHUST 30HQX SERIES EXHUST HOSPITL GRDE QUIET TYPE WITH DISSIPTIVE SILENCER PRODUCT OVERVIEW Nailor Single Duct Exhaust Terminal Units are used to modulate exhaust flow from an
More informationMULTIDIRECTIONAL DIFFUSERS WITH EXTRACTABLE CONES
MULTIDIRECTIONAL DIFFUSERS WITH ETRACTABLE CONES OVERVIEW AND TECHNICAL DATA 4 Multidirectional 4-ways-diffusers in aluminium - dimensions from mm. 150 x 150 to mm. 600 x 600. MODEL A B D mm mm mm 150
More informationTHL - Conical Ceiling Diffuser. Halton THL. Conical Ceiling Diffuser
Halton THL Conical Ceiling Diffuser Horizontal or vertical air supply, suitable for both heating and cooling applications Adjustable throw pattern and pressure drop Installation flush to the ceiling, or
More informationFlowBar High Capacity Slot Diffuser
October 2016 FlowBar High Capacity Diffuser Model HT (High Throw) Model JT (Jet Throw) Features HT & JT 25mm, 38mm, 51mm, 63mm & 76mm s Ceiling or Sidewall Applications Modular or Continuous s Curved Sections
More informationFIXED BLADE LOUVRE FACED CEILING DIFFUSER
IFFUSERSFixed lade Louvre Faced FIXE LE LOUVRE FCE CEILING IFFUSER range of fixed blade ceiling diffusers with a 2 position, removable core for use in heating / cooling applications where the mounting
More informationOVERVIEW Combination Supply/Return Diffuser (SARM)
OVERVIEW Combination Supply/Return Diffuser (SARM) APPLICATION INFORMATION The extruded aluminum square and rectangular supply and return diffusers are designed principally for packaged roof top type heating
More informationcritical environment diffusers
FlowBar Critical Environment Diffusers Hard Diffusers Ceiling Table Applications of Contents 2 CRITICAL ENVIRONMENT DIFFUSERS Critical Environment Diffusers... 3 Applications... 3 General Clean Room Information...
More informationATU PRODUCT CATALOG AIR TERMINAL UNITS FCI-600 CONSTANT VOLUME FAN TERMINAL UNIT Metal Industries, Inc.
ATU PRODUCT CATALOG AIR TERMINAL UNITS FCI-600 CONSTANT VOLUME FAN TERMINAL UNIT 15 Metal Industries, Inc. BENEFITS: Fan powered terminals are typically used for heating and cooling of perimeter zones.
More informationTRB - Conical Ceiling Diffuser. Halton TRB. Conical Ceiling Diffuser
Halton TRB Conical Ceiling Diffuser Horizontal or vertical air supply, suitable for both heating and cooling applications Supply air jet velocity is effectively reduced due to high mixing effect Installation
More information