All-steel construction For installation of #16 diffuser when not using a damper. Golden Sand enamel finish. 12 Butterfly Damper
|
|
|
- Helena Lane
- 6 years ago
- Views:
Transcription
1 11 Duct Ring All-steel For installation of #16 diffuser when not using a damper Golden Sand enamel finish Size A 6 7-1/ / / / / /16 11 Available Sizes (in.) 6, 8, 10, 12, 14, Butterfly Damper All-steel Controls air volume evenly over entire #16 diffuser Removable knob operator for adjustment from closed to fully open Golden Sand enamel finish 12 Available Sizes (in.) Size A B / / / / / / / / / / / / 16 Note: Knob permits diffuser to be held in position while attaching face screws. Only available in sizes shown 16 Ceiling Diffuser All-steel Step-down diffuser rings deflect air stream 360 degrees 16 Available Sizes (in.) 6, 8, 10, 12, 14, 18 Only available in sizes shown Engineering Data on Page 49 27
2 24 All-steel Step-down face deflects air stream 360 degrees Bright White finish Only available in sizes shown. 24 Ceiling Diffuser (in.) Size Free Area Sq. Inches No. of Cones Installation Frame All-steel Golden Sand enamel finish Used but not furnished with #24 ceiling diffusers. Not required when using 22 Butterfly Damper or 23 Opposed Blade Damper. Cannot be used with SD and SDD. 21 Available Sizes (in.) 6, 8, 10, 12, 14, 16, 18, 20, 22, Butterfly Damper All-steel Used with #24 Ceiling Diffuser Knob control for quick adjustment (removable) Installation flange included Golden Sand enamel finish 22 Available Sizes (in.) Size A B / / / / / / / / / / 16 Only available in sizes shown. 28
3 23 Opposed-Blade Damper All-steel Used with #24 Ceiling Diffuser Controls air volume over entire diffuser Key operated Mill finish 23 Available Sizes (in.) 6, 8, 10, 12, 14, 16, 18, 20, 22, 24 A501/A501 Extruded One-way air diffusion Face mount for easy installation fingertip lever for air volume control A502/A502 Extruded Two-way air diffusion fingertip lever for air volume control Bright White A501/A501 (in.) A502/A502 (in.) Engineering Data on Page
4 A503/A503 Extruded Three-way air diffusion fingertip lever for air volume control A503/A503 (in.) A504/A504 Extruded Four-way air diffusion fingertip lever for air volume control A504/A504 (in.) A505/A505 Extruded Two-way corner air diffusion fingertip lever for air volume control A505/A505 (in.) 30 Engineering Data on Page 50
5 SD/SDD Diffuser Extruded Annular rings to provide minimum resistance Face only on SD Opposed-blade damper available with SDD Only available in sizes shown Note: SDD in size 20" x 20" is furnished with two separate dampers and operators. SD/SDD Available Sizes (in.) X SDD ECFM Aluminum Diffuser Integral damper with lever for face operation Center mullions provided on sizes over 18" x 18" All extruded Furnished with mounting screws and optional gasket Adjustable bars ECFM Available Sizes (in.) 12x12, 14x14, 16x16, 18x18, 20x20, 22x22, 24x24 Engineering Data on Page 52 31
6 Rezzin Registers & Diffusers T-Bar Backer Plate or Rafter Rough-In Plate Available RZ500 Plastic Square Ceiling Diffuser Engineered polymer 12"x12" face 6", 7" and 8" collars included Ratcheting cam lock install without screws Removable core and integral damper Available in 4-way, 3-way and 2-way corner Contains metal parts RZ500 Available Size (in.) 12 x 12 RZ503 RZ504 RZ505 T-Bar Backer Plate or Rafter Rough-In Plate Available RZ16 Plastic Round Ceiling Diffuser Engineered polymer 12" round face 6", 7" and 8" collars included Ratcheting cam lock install without screws Removable core and integral damper Contains metal parts RZ16 Available Size (in.) Engineering Data on Page 51
7 ECBX 4-way Ceiling Diffuser Box Adjustable dampers provide directional airflow or closure capabilities Mounting holes provided for easy installation Heavy-duty steel For 24x24 T-Bar installation, order ECBX-T Available in T-Bar version, see page 102 ECSD/ECSDD Diffuser Heavy-duty steel For evaporative coolers or central blower systems Step-down design louvers provide four-way air delivery Face only ECSD with slide in plate for offseason closure Multi-shutter damper on ECSDD Countersunk mounting holes for flush appearance with screws provided (ECSDD only) ECBX Available Sizes (in.) 14x14, 18x18, 20x20, 22x22, 24x24, 30x30, 36x36 ECSD ECSD/ECSDD Available Sizes (in.) 14x14, 16x16, 18x18, 20x20 ECSDD ECHVD Evaporative Cooler Diffuser Heavy-duty steel Durable finish for high quality appearance and corrosion resistance Two-way deflection ECHVD Available Sizes (in.) 6x6, 8x8, 10x10, 12x12, 14x14, 16x16, 18x18, 20x20, 22x22, 24x24 Engineering Data on Page 52 33
makes sure products are delivered Products are offered in steel,
Residential Construction Features Residential Registers, Grilles & Diffusers No one satisfies the demands for For example: an electro-deposition air distribution solutions better than paint creates a flawless
LINEAR DIFFUSERS AND BAR GRILLES
49-240 48LL1 49-280 49-480 48LL2 Linear ar Grilles The Nailor 4900 Series provides an extruded aluminum bar grille that offers beautiful styling and efficient performance. Linear bar grilles offer a choice
GRILLES, REGISTERS AND DIFFUSERS 2014 PRODUCT CATALOG REV. 6-14
GRILLES, REGISTERS AND DIFFUSERS 2014 PRODUCT CATALOG REV. 6-14 AIRMATE IS A RECOGNIZED LEADER IN THE HVAC INDUSTRY, PROVIDING SUPERIOR DESIGN AND SETTING THE STANDARD FOR QUALITY AirMate s comprehensive
DRUM JET DIFFUSERS TYPE: DJA DJB DJAP DJBP
TYPE: DJA DJB DJAP DJBP APPLICATION Type DJ As with type AJ diffusers, this product is also designed to project large volumes of air over long distances, but particularly lends itself to sidewall or ductmounting,
SECURITY PRODUCTS GENERAL PRODUCT OVERVIEW. Security Products
GENERAL PRODUCT OVERVIEW Security Products Nailor offers a complete line of Security Grilles, Registers and Diffusers. The product line includes grilles and registers for maximum, medium and minimum security
Optima EXHAUST GRILL AND AIR LOUVER. Perforated Ceiling Diffusers. Features: Standard square sizes:
Perforated Ceiling Diffusers OPTIMA ceiling diffuser with perforated face, are recoended for heating, ventilating and cooling in centralized air conditioning systems. Perforated face diffusers, with 4-3-
NAILOR COMMERCIAL REGISTERS, GRILLES AND DIFFUSERS
INDEX CEILING DIFFUSERS... 9-2 ARCHITECTURAL (LAY-IN T-BAR)... 9-2 SQUARE (LAY-IN T-BAR ) 3 CONE... 9-2 SQUARE (LAY-IN T-BAR) 4 CONE... 9-2 SQUARE (LAY-IN T-BAR) ADJUSTABLE SLIDING TYPE... 9-2 SQUARE (PANEL
DRUM LOUVERS DRUM LOUVERS 45DL SERIES. Models: 45DL1 Single Vanes 45DL2 Split Vanes G151 HIGH CAPACITY LONG THROW ALUMINUM CONSTRUCTION
DRUM LOUVERS 45DL SERIES HIH CAPACITY LON THROW ALUMINUM CONSTRUCTION Models: Single Vanes 45DL2 Split Vanes Suffix '-O' adds a steel opposed blade damper Models -O and 45DL2 Model Series 45DL Drum Louvers
Product Nomenclature G-X-AB-Z 0 = Zero Degree, 1 = 15 Degree, 2 = 15 Degree (2-way)
Fixed Bar Grills - Series G Description Caryaire Fixed Bar Grills are ideal for Supply as well as Return air, in both Cooling as well as Heating. It can be used in high side wall or ceiling applications.
STEEL LOUVERED DIFFUSERS [CFM Range is only a guide. See Manufacturer Catalog for complete data. All NC Levels in Acceptable Range<32.
STEEL LOUVERED DIFFUSERS TUTTLE & BAILEY Model 1300 - Round Neck Steel, Lay-In Tee Bar Mounting Neck Size Panel Size CFM Range Price Each Volume Damper Model RBN *6 12 x 12 75-180 $19 $12 6 24 x 24 75-180
LAMINAR FLOW DIFFUSER Model DLAB
Laminar & Radial Flow Diffuser LAMINAR FLOW DIFFUSER Model DLAB Application Laminar Flow diffusers are used to deliver air to surface directly underneath in a non-aspirating air pattern, with the minimum
GRILLES, REGISTERS, DIFFUSERS, DAMPERS & LOUVERS Product Catalog
GRILLES, REGISTERS, DIFFUSERS, DAMPERS & LOUVERS Product Catalog USAire 1985 Carroll Street Clearwater, Florida 33765 800-998-9929 toll free 800-965-8383 toll free fax www.usaire.com 2010 All rights reserved
Incorporating V2.1. Product spec >>> > Series ECG - Egg crate grilles
Incorporating V2.1 Product spec >>> > Series ECG - Egg crate grilles Grilles Egg crate Recommended for: Wall, ceiling & duct Extract Overview Industry standard extract grille Plastic egg crate core optional
EXCITING NEW PRODUCTS FROM TRU AIRE. Model 115/118 Baseboard Supply & Return Page 03. Model 800 Round Ceiling Diffuser Page 16
EXCITING NEW PRODUCTS FROM TRU AIRE What s New... Model 154R Floor Return Grille Page 0 Model 115/118 Baseboard Supply & Return Page 03 Model 14 Baseboard 1/3 Supply Page 03 New Product Lineup Model 13
Square/Rect. and Square Louvered Face and Plaque Face Diffuser
/Rect. and Louvered Face and Plaque Face Diffuser Series J: Easily Adjustable from Horizontal to Vertical Vertical Discharge Application: Carnes steel (SK) and aluminum (SE) louvered face diffusers are
Steel Single Deflection Supply Grille, Register (RSSB, RTSB)
Steel Single Deflection Supply Grille, Register (RSSB, RTSB) 1-3/8 2-9/16 Listed Size +2 Listed Size - 2/3 Listed Size 1-1/4 Listed Size +2 3/4 Application: Single Deflection Supply R&G provide a discharge
SECURITY PRODUCTS GENERAL PRODUCT OVERVIEW. Security Products
GENERAL PRODUCT OVERVIEW Security Products Nailor offers a complete line of Security Grilles, Registers and Diffusers. The product line includes grilles and registers for maximum, medium and minimum security
Premium Correctional Air Distribution. The First Name in Air Diffusion.
Premium Correctional Air Distribution The First Name in Air Diffusion www.anemostat.com PRODUCT DIRECTORY APPLICATIONS Stainless Steel S-Vent MAXIMUM SECURITY GRILLES NEW CONSTRUCTION page 16 page 4 &
MOTORIZED VOLUME DAMPER
MOTORIZED VOLUME DAMPER 1 a perfect partner in performance... Our Product Ranges Dampers 1 Fire Dampers 2 Fire / Smoke Dampers 3 Volume Control Dampers 4 Motorized Control Dampers 5 Pressure Relief Dampers
INDEX. Chapter1 1. A. Jet diffusers 1. Jet diffuser...: AJD-P
Chapter1 1 INDEX A. s 1....: AJD-P...11.1 Standard sizes...11.1 Fixing details...11.2 Panel arrangement...11.2 How to order...11.2 B. Air flow data 1. at o o position...: Tab: 11.1 (A)...11.3 2. at o position...:
Positive Seal Damper Blades with Vinyl Gaskets 2.5" SERIES 3000 SIDE MOUNT - NO FLANGE ORDERING METHOD FOR BACKDRAFT & MOTORIZED BACKDRAFT DAMPERS
BACKDRAFT DAMPERS BLADE OPTION: SR: 0.016-0.020 roll formed aluminum with vinyl gasket - used with fan motors under 1 HP SE: 0.05 extruded aluminum with vinyl gasket - used with fan motors over 1 HP Positive
CURTAIN TYPE FIRE DAMPER
MODEL: IBD-2 / IBD-2H STANDARD CONSTRUCTION FIRE RATING UL 555 1-1/2 hours UL classification damper SS: 4 hours rating classification damper NOTES Damper s dimension is usually about 10 mm smaller than
MODULAR CORE CEILING DIFFUSERS
MOEL SQUARE 12345-10 MOULAR CORE SQUARE IFFUSERS ROUN NECK SQUARE 1, 2, 3 OR ROUN 4-WAY AJUSTABLE NECK SQUARE ISCHARGE ROUN PATTERN NECK Steel Model: 7500 Suffix '-O' adds a steel opposed blade damper
SECURITY PRODUCTS GENERAL PRODUCT OVERVIEW. Security Products
GENERAL PRODUCT OVERVIEW Security Products Nailor offers a complete line of Security Grilles, Registers and Diffusers. The product line includes grilles and registers for maximum, medium and minimum security
Series DD & SD-20 Supply Grilles & Registers
Series DD & SD-20 Supply Grilles & Registers Grille - Two Sets of Louver Blades Model DDL-20 Two sets of louver blades. Front set parallel to long dimension. Rear set parallel to short dimension. All louver
Incorporating V2.0. Product spec >>> > Series NV - Non vision grilles
Incorporating V2.0 Product spec >>> > Series NV - Non vision grilles Grilles Non-vision Recommended for: Wall & door Supply & extract Overview Block line of sight into private areas Giving adequate ventilation
Application Guidelines
Grilles and Registers Application Guidelines Introduction Overview It is the intent of this section to give some basic application guidelines for the use of supply and return grilles and registers in a
aj manufacturing company custom and stainless air distribution products
aj manufacturing company custom and curved blade single deflection supply grille SSCB (1, 2, 3 & 4-way deflection) stainless steel... 9-5 door grille SSDG stainless steel... 9-5 eggcrate SSec stainless
J1-2. Table of Contents RETURN GRILLES
J1 RETURN GRILLE Table of Contents RETURN GRILLE / These fixedblade return grilles feature 3/4 blade spacing. Deflection will be fixed at 3 or. Available in aluminum or steel construction. / These fixedblade
CEILING DIFFUSERS D12 CEILING DIFFUSERS
PREMIUM This perforated return has an extruded aluminum frame with a narrow border that is visible within the T-Bar module. See Model Series 4330 and 4330CB for the matching supply air diffusers. Flush
Incorporating V2.0. Product spec >>> > Series DD - Double deflection grilles
Incorporating V2.0 Product spec >>> > Series DD - Double deflection grilles Grilles Double deflection Recommended for: Wall, ceiling & duct Supply & extract Overview Enhanced functionality As per the name,
INDEX. Chapter1 0. air master. Round Ceiling Diffusers
air master Chapter1 0 INDEX A. Round ceiling diffusers 1. Fixed round ceiling diffuser...: ARDF...10.1 2. Round ceiling diffuser with adjustable pattern...: ARD...10.2 Standard sizes...10.3 Air pattern...10.3
Model ABV Pressure Independent Automatic Balancing Valve. Application: Standard Construction: Performance: Configurations Available:
Model ABV Tag: Project: Location: Date: Engineer: Contractor: Architect: Submitted by: Application: The ABV Automatic maintains a constant airflow volume in HVAC applications. The highly engineered damper
Air Louvers OFAL 300 SERIES
Fresh / Exhaust Model : OFAL GI 359 Description: Stationary Louvers is designed to provide air intake and air exhaust openings in building exterior walls to protect against the direct ingress of rain.
WAREHOUSE STOCK CATALOG
Commercial HVAC Products WAREHOUSE STOCK CATALOG Registers, Grilles, & Diffusers Humidifiers Ventilators Your path to quality HVAC solutions VERONA, WI 53593 Phone: 877/945-9175 Fax: 608/845-6504 info@airspecialties.com
CEILING DIFFUSERS GENERAL PRODUCT OVERVIEW
GENERAL PROUCT OVERVIEW Ceiling iffusers Quality Assured Products, unobtrusive clean lines for appearance, careful engineering and professional workmanship with the backing of an industry leader - these
PERFORATED CEILING DIFFUSERS
PERFORAE MOEL PERFORAE 12345-10 CEILING SQUARE IFFUSERS ROUN NECK SQUARE ROUN NECK SUPPLY SQUARE 1, 2, 3 OR ROUN 4-WAY AJUSABLE NECK ISCHARGE PAERN Steel Models: 4320 Flush Face 4325 rop Face Aluminum
VCD-43V. Vertical Airfoil Blade Control Damper. Application and Design. Ratings. Size Limitations. Features and Options: Pressure:
Application and Design is a low leakage damper with vertical blade orientation designed to meet the highest standards established for commercial control dampers. The is intended for application in medium
LINEAR DIFFUSERS AND BAR GRILLES
LINEAR DIFFUSERS AND AR GRILLES LINEAR DIFFUSERS AND AR GRILLES LINEAR SLOT DIFFUSER PLENUMS FOR TECHZONE TYPE CEILINGS Model Series 5300TZ Plenums are designed to fit the 5000TZ Series Slot Diffusers.
Model VCD-40. Extruded Airfoil Blade Control Damper Narrowline Frame Construction. Application. Ratings. Flange Options.
Model Application The is a low leakage high performance control damper with extruded aluminum airfoil blades. Blades are completely contained within the frame allowing the damper to be directly mounted
SafidDampers SPK Description. Standard Construction SPK ( Flange Type )
( Flange Type ) SPK 30-300 Description SPK 30 - Series The single and multi-leaf s with extruded aluminum airfoil blades are designed for quite, efficient and reliable air volume control in air conditioning
AIRODYNE CATALOGUE VOLUME CONTROL TAMPERS CONSTRUCTION / MATERIALS
AIRODYNE CATALOGUE VOLUME CONTROL TAMPERS CONSTRUCTION / MATERIALS Airodyne multi leaf volume control tampers have been specifically designed for use in air conditioning and ventilation system for volume,
Series HCD Airfoil Control Damper
Series HCD Airfoil Control Damper Model: HCD-1 The Holyoake HCD-1 is a precisely made volume and pressure control device with extremely low leakage when closed, (in the range of 0.003m 3 /s at 100 Pa).
EGG CRATE RETURN GRILLE
80 EGG CRATE RETURN GRILLE 80 The 80 Series is available in various mounting styles and features sturdy construction, consisting of a heavy gauge aluminum grid core, optional extruded aluminum borders
Wall and Ceiling Grille
September 14 Wall and Ceiling Grille Models SD, DD, EC, PG, G45, NVG, NB, GN, WB and GW Single and Double Deflection Fixed and Removable Core Eggcrate Perforated Grille 45 Fixed Blade Non Vision Bar Grilles
LOUVERED FACE GRILLES AND REGISTERS
Performance Notes for Supply rilles and Registers, 6 and 67 Series Throw, Spread and Drop The isovel diagrams shown below, illustrate in plan view, the relationship of horizontal spread to throw for three
CONCENTRIC Product Information & Applications
CONCENTRIC Product Information & pplications Concentrics s the leading manufacturer of Concentric Diffusers for the past 30 years, Ruskin Rooftop Systems offers a cost effective way of distributing air
OVERVIEW Combination Supply/Return Diffuser (SARM)
OVERVIEW Combination Supply/Return Diffuser (SARM) APPLICATION INFORMATION The extruded aluminum square and rectangular supply and return diffusers are designed principally for packaged roof top type heating
Bulletin BCF 103 DESIGN 10A BACKWARD INCLINED WHEELS
Bulletin BCF 10 DESIGN 10A BACKWARD INCLINED WHEELS Proven Reliability in Industrial Environments and Corrosive Atmospheres Design 10A s with Backward Inclined Wheels Chicago s Design 10A is a rugged multi-purpose
A1GRILLES & REGISTERS
1GRILLES & REGISTERS GRILLES ND REGISTERS Contents Page No. GRILLES ND REGISTERS General Product Overview Louvered Face Grilles and Registers Models GDS, GDL - luminum - Double Deflection - Supply Models
INDEX. Chapter3. air master. Linear Bar Grilles
Chapter3 INDEX A Linear bar grilles: 1. Supply linear bar grille...: ASLG...3.1 2. Supply linear bar register...: ASLR...3.2 3. Return linear bar grille...: ARLG...3.3 4. Return linear bar register...:
CEILING DIFFUSERS CEILING DIFFUSERS
CEILING IFFUSERS "TWISTER" HIGH INUCTION STAMPE FACE The "Twister" diffuser is engineered to optimize air distribution effectiveness. This next generation diffuser has a high induction, 360 swirl pattern
INDEX. Chapter2. air master. Grilles and Registers
Chapter2 INDEX A.Grilles and registers. 1. Supply air grille - front horizontal blades...: ASG-H...2.1 2. Supply air grille - front vertical blades...: ASG-V...2.2 3. Supply air register - front horizontal
SD-1250 and SD-1600 Series Smoke Dampers
SD-1250 and SD-1600 Series Smoke Dampers Product Bulletin Code No. LIT-1201592 Issued January 30, 2014 Supersedes October 14, 2013 Johnson Controls provides a leakage-rated damper for life safety smoke
CEILING DIFFUSERS CEILING DIFFUSERS
Model 4340M Model 4330CB Premium, Curved Blade Pattern Controllers The perforated diffusers in this series have an extruded aluminum frame with a narrow border that is visible within the T-Bar module.
Application Guidelines
Grilles and Registers Application Guidelines Introduction Overview It is the intent of this section to give some basic application guidelines for the use of supply and return grilles and registers in a
EYELASH DIFFUSERS E SERIES. Quality and efficiency without compromise
EYELASH DIFFUSERS E SERIES Quality and efficiency without compromise Weltech Business Centre - Ridgeway - Welwyn Garden City - Hertfordshire AL7 2AA Tel: 01707 71526 - Fax: 01707 71 527 - email sales@jprservices.co.uk
BC 08. Sand Trap Louvers STL-AB-11A LISTED
BC 08 Sand Trap Louvers STL-AB-11A Table Of Contents S. No Description Page No 1 General Information 1 2 Various Models 2 3 STL - B-10 Series 4 STL - BC-20 Series 3 4 5 6 STL - B-30 Series STL - B-40 Series
A. Product Data: For each type of product. TLC ENGINEERING FOR ARCHITECTURE - PROJECT NO AIR DUCT ACCESSORIES
SECTION - PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification Sections, apply to this
ISO 9001:2008
DOOR Dutch, Standard Duty, Individual Dog Model Features 1 FREEMAN MARINE Dutch doors perform like a single panel door when regular access is needed, yet the top half can be operated separately from the
K1-2. Table of Contents LINEAR BAR GRILLES 1500, 1500MC, 1800, 1800MC
K Table of Contents, This series of extruded aluminum supply and return linear bar grilles are for ceiling, sidewall, sill (), and floor () applications. Blade thickness is 7/32., This series of extruded
When Time is Everything... We Manufacture in Days - Not Weeks!
When Time is Everything... We Manufacture in Days - Not Weeks! DAMPERS ACCESS DOORS LOUVERS July 2014 Specializing In Products For The HVAC Industry 763-783-7173 fax: 763-785-6977 1-800-297-9360 Customer:
Plastic Diffusers & Grilles
Diffusers & Grilles No rust, no corrosion Won t fade or yellow Scratches don t show No painting or repainting Won t bend Mildew resistant Consistent smooth finish Indistinguishable from metal when installed
Plastic Diffusers & Grilles
Diffusers & Grilles No rust, no corrosion Won t fade or yellow Scratches don t show No painting or repainting Won t bend Mildew resistant Consistent smooth finish Indistinguishable from metal when installed
We make dampers easy for you!
FIRE DAMPERS & CEILING RADIATION DAMPERS We make dampers easy for you! In over 50 years of business, we ve learned how to make business easy for our customers, and dampers are no exception. We ve honed
Aluminium Grilles. supply, exhaust and transfer ventilation systems. flow control / equalisation & pressure regulating dampers
Publication Part J GILLES section 1 SEPT 2005 Aluminium Grilles supply, exhaust and transfer ventilation systems flow control / equalisation & pressure regulating dampers Pressure regulating dampers PESSUE
IN STAL LA TION IN STRUC TIONS FOR CON CEN TRIC DIF FUSER
IN STAL LA TION IN STRUC TIONS FOR CON CEN TRIC DIF FUSER UNIT FILTER PLENUM CONTROL MOTOR ECONOMIZER FRESH AIR EXHAUST AIR ROOF CURB FLEXIBLE DUCT CON CEN TRIC DIFFUSER BOX Concentric Diffuser Flush Mount
Price O.R. Systems AIR CURTAIN SYSTEM
Price O.R. Systems AIR CURTAIN SYSTEM The Price Air Curtain System includes non-aspirating laminar flow diffusers directly above the surgical area with a surrounding four-sided linear slot diffuser system
CUSTOMISED PRODUCTS COMPETITIVE PRICING ON-TIME DELIVERY PRODUCT GUIDE.
CUSTOMISED PRODUCTS COMPETITIVE PRICING ON-TIME DELIVERY PRODUCT GUIDE ABOUT US Dragon Grilles has over 50 years experience in the manufacture and supply of air handling products. Our production facility
HCD-230 Industrial Control Damper
Application and Design Model is a heavy duty industrial control damper with a flanged frame. It is designed to control airflow and provide shut off in HVAC or industrial process control systems. A variety
J1-2. Table of Contents RETURN GRILLES
J1 RETURN GRILLE Table of Contents RETURN GRILLE / These fixedblade return grilles feature 3/4 blade spacing. Deflection will be fixed at 3 or. Available in aluminum or steel construction. / These fixedblade
IMPERIAL REGISTERS AND GRILLES
Revised: July 205 Replaces: August 204 INDEX DIFFUSERS BASEBOARD WHITE... 8-0 GRILLES BASEBOARD RETURN AIR... 8-8 8-9 PROJECTION 2" PROJECTION WHITE... 8-0 SIDEWALL 3/6" PROJECTION PAINTED STEEL WHITE...
C O L M A N. Air Distribution LINEAR BAR GRILLES T SERIES SERIES
C O L M A N Air Distribution E N G I N E E R E D A I R P R O D U C T S LINEAR BAR GRILLES T SERIES T SERIES C O L M A N Air Distribution E N G I N E E R E D A I R P R O D U C T S LINEAR BAR GRILLES T SERIES
Extruded Aluminum Construction 1/4 Bars on 1/2 Centers Floor, Sidewall or Ceiling Mount Pencil Proof
OVERVIEW Linear Bar, Grilles and Registers OVERVIEW LINEAR BAR, GRILLES and REGISTERS Curtainaire Trimaire Varicore Extruded Aluminum Construction 1/4 Bars on 1/2 Centers Floor, Sidewall or Ceiling Mount
GRILLES AND REGISTERS
Heavy Duty Steel rilles and Registers, ymnasium Strength Nailor s Heavy Duty Steel rilles and Registers are manufactured with 16 gauge steel frames and 14 gauge steel blades which gives them strength to
EX C E L L E N C E ISO 9001 CERTIFIED COMPANY LINEAR BAR GRILLES.
25 YEARS OF EX C E L L E N C E ISO 9001 CERTIFIED COMPANY 3.0 INDEX ISO 9001 CERTIFIED COMPANY SECTION TOPIC PAGE 3.1 Double deflection linear bar grille ASLG 3 3.2 Double deflection linear bar register
Perforated Face Ceiling Diffusers
February 2011 Perforated Face Ceiling Diffusers Perforated Face Ceiling Diffuser Models PD, DFP and DPP Features NEW DROP PLQUE DESIGN 3 Model Types 1, 2, 3 or 4 way ir Patterns Extruded luminium Sections
Plaster In Grilles 1/1.5/B/1. AHP Plaster-in Linear Bar Grille ADMP Plaster-in Linear Diffuser ALSP Plaster-in Linear Slot Diffuser
1/1.5/B/1 Plaster In Grilles AHP Plaster-in Linear Bar Grille ADMP Plaster-in Linear Diffuser ALSP Plaster-in Linear Slot Diffuser TROX UK Ltd Caxton Way Thetford Norfolk IP24 3SQ Telephone +44 (0) 1842
L O U V E R S & D A M P E R S
L O U V E R S & D A M P E R S www.alggin.com CALGARY EDMONTON LETHBRIDGE 4540-46th Ave. SE 12110-154 St. NW 1126-36 St. N (403) 252-0132 (780) 424-0132 (403) 320-8732 sales@alggin.com edmsales@alggin.com
EXTRUDED ALUMINUM LINEAR BAR GRILLES AND REGISTERS
SAUDI AIR CONTROL SYSTEM INDUSTRIAL REGISTRATION NO.353 EXTRUDED ALUMINUM LINEAR BAR GRILLES AND REGISTERS EXTRUDED ALUMINUM LINEAR BAR GRILLES AND REGISTERS SERIES GLG and GLR 1, 2, 3, 4/5,6,7,8,9,10.
GRILLES AND REGISTERS
Models 51EC, 67EC Models 51PR, 67PR Eggcrate Return and Exhaust rilles The eggcrate grilles and registers are constructed of thin, interlocked aluminum or stainless steel strips assembled in a square grid
AL-Maraj Central A/C Systems Accessories Mfg Co.
AL-Maraj is one of the renowned Manufacturer, Stockist and Supplier of all kinds of HVAC products, Ducting accessories, Pipe support system, Electro-mechanical and A/C Accessories in U.A.E since 2000.
GRILLES AND REGISTERS
Heavy Duty Steel rilles and Registers, ymnasium Strength Nailor s Heavy Duty Steel rilles and Registers are manufactured with 16 gauge steel frames and 14 gauge steel blades which gives them strength to
LINEAR BAR GRILLES T SERIES. Quality and e!ciency without compromise
LINEAR BAR GRILLES T SERIES Quality and e!ciency without compromise Weltech Business Centre - Ridgeway - Welwyn Garden City - Hertfordshire AL7 2AA Tel: 01707 871526 - Fax: 01707 871 527 - email sales@jprservices.co.uk
HCD-135. Industrial Control Damper. Application and Design. Ratings (see page 2 and 3 for specific limitations) Standard Construction.
Application and Design Model is a heavy duty industrial control damper with a flanged frame. It is designed to control airflow and provide shut off in HVAC or industrial process control systems. A variety
Model VCD-20V. 3V Vertical Control Damper. Application and Design. Ratings (See page 4 for specific limitations) Flange Options.
Application and Design The series is a vertical blade general purpose damper for application as an automatic control or manual balancing damper. This model is intended for application in low to medium
SECURITY PRODUCTS SECURITY PRODUCTS
GRILLES & REGISTERS These louvered blade grilles and registers are paired up with a lattice face plate to meet minimum security requirements. They are available for both supply and return air applications
PERFORATED CEILING DIFFUSERS
PERFORAE PERFORAE CURVE MOEL BLAE 12345-10 IFFUSERS SQUARE ROUN NECK SQUARE SUPPLYROUN NECK 4-WAY AJUSABLE ISCHARGE SQUARE ROUN NECK PAERN (SANAR) 1, 2 OR 3-WAY ISCHARGE PAERN (OPIONAL) Steel Models: 4320CB
Control Dampers. Leakage Performance. Model FDNB (Opposed Blade) FDQB (Parallel Blade) Galvanized 3V Blade Control Dampers
Control s Model FDCB (Opposed Blade) FDHB (Parallel Blade) Aluminum Low Leakage Control s Frame:.081 extruded aluminum Blades:.125 extruded aluminum Bearings: bronze oilite Linkage: *concealed in frame
LINEAR BAR GRILLES. GRILLES-Linear Bar
LINEAR BAR GRILLES A range of linear bar grilles with horizontal blades at either 0, 15, 0 or 45 deflection and fixed or removable cores. Usually used in sidewall applications, but they are also designed
GRILLES AND REGISTERS
RILLES AND REISERS HEAVY DUY SAINLESS SEEL his grille is used mainly for return air applications that require strength and durability in corrosive or high humidity environments. he frame is welded and
AFL-501. Aluminum FEMA 361 Louver Chevron Blade Application and Design
FEMA 361 Louver Chevron Blade Application and Design is an aluminum louver designed to protect exterior wall penetrations on FEMA 361 or FEMA 320 compliant storm shelters or safe rooms. Design incorporates
FBV-43. Vertical Face & Bypass Control Damper Ultra Low Leakage Aluminum Frame Construction. Application and Design. Size Limitations.
Application and Design The is a vertical style face and bypass low leakage damper. This model is intended for application in medium to high pressure and velocity systems. Smooth profile extruded aluminum
product description model AL UP TO 120" SINGLE PIECE CONSTRUCTION REDUCES JOINTS Airline Linear Grilles & Registers Aluminum Bar Grilles & Registers
product description APPLICATION UP TO 120" PIC CONSTRUCTION RDUCS JOINTS Recommended for heating, cooling, or general ventilation applications Supply or return air systems Sill installation blankets glass
2018 STOCK CATALOG. Sales Offices. Serving Upstate New York, Vermont & Western Massachusetts with Quality HVAC Products for over 50 Years
Serving Upstate New York, Vermont & Western Massachusetts with Quality HVAC Products for over 50 Years 2018 STOCK CATALOG Sales Offices ALBANY, NEW YORK BUFFALO, NEW YORK ROCHESTER, NEW YORK SYRACUSE,
ceiling & inline/cabinet ventilators
Air Moving Solutions. ceiling & inline/cabinet ventilators T-Series ( T TL ) CATALOG 4600 March 2012 Ceiling&InlineVentilators T-Series T TL Twin City Fan & Blower s T Series Ceiling and TL Series Inline/Cabinet
Baked Enamel, Epoxy, Hi Pro Polyester, Industrial Epoxy, Kynar/Hylar (70%) Permatector. Single or Reverse Flange 8 x 6 (203 x 178)
Application and Design The is an extremely low leakage damper designed to meet the highest standards established for commercial control dampers. The is intended for application in medium to high pressure
DCG Adjustable Aluminum Round Diffusers
51 DCG Adjustable Aluminum Round Diffusers H V A C TM Rev 27-05-2018 52 DCG SEries Aluminum Adjustable Round Diffusers Adjust core up and down to move from horizontal to vertical airflow Architecturally
CEILING AIR INLETS CORROSION PROOF ECONOMICAL DURABLE. Ideal for all Agricultural applications.
CEILING AIR INLETS CORROSION PROOF ECONOMICAL DURABLE Ideal for all Agricultural applications. These durable ceiling inlets are rotational moulded with high impact polyethylene. They are designed to offer
SECTION HVAC CONTROL SYSTEM PART 1 GENERAL 1.01 SUMMARY. A. Section Includes:
SECTION 15970 HVAC CONTROL SYSTEM PART 1 GENERAL 1.01 SUMMARY A. Section Includes: 1. Thermostats, temperature transmitters, controllers, automatic valves, dampers, damper operators, pneumatic/ electric