ISO 9001:2008

Size: px
Start display at page:

Download "ISO 9001:2008"

Transcription

1 DOOR Dutch, Standard Duty, Individual Dog Model Features 1 FREEMAN MARINE Dutch doors perform like a single panel door when regular access is needed, yet the top half can be operated separately from the bottom half to improve ventilation and visibility. Double-skin panel construction offers simplicity yet broad flexibility for configuring doors to specific needs. Doors have.080 mill finished aluminum skins captured in an extruded aluminum panel framework, clamp-grip style windows with 3/16 clear glass, and marine grade lever handle locksets. The outer skin is trapped by the door panel extrusion, and the inner skin is riveted. Solidly constructed and fully insulated, Standard Duty Dutch doors are suitable for the following typical high traffic access installations: Pilothouse Galley Salon Main Deck Where suitable, doors can be designated to include additional windows and/or dogs or omit windows and/or dogs. Pilothouse doors are often provided with windows in both top and bottom of the panel to allow greater operator visibility to deck or waterline areas. DUTCH, STANDARD DUTY DESIGN FEATURES Custom Sizing, width and height.080 Panel Skins, outside and inside Welded Panel Frame for Strength Outer Skin Captured in Frame Extrusion, Riveted Inner Skin Gasket on Door Panel for Long Life and Positive Sealing Gasketed Joint Between Upper and Lower Panels Radius or Mitered Corners Bolt-in, Weld-in or Clamp-in Frames Welded Internal Doublers at All Seams Mill Finish Door Skins Cast Dogging Handles, powder coated finish Dog Shafts Glass Filled Striker Wedges Solid Polyurethane Insulation Hinges, butt style only Fasteners Clamp-Grip Window, 3/16 or 1/4 Clear Tempered Glass, (opt avail) Standard Duty Dutch doors are custom fabricated to each applications specific needs. Layout Photos Model Windows Hinges Handles Coaming Panel

2 DOOR Dutch, Standard Duty, Individual Dog Model Photos 1 Individual dog on striker, Inside Joint facia strip, Detail of upper panel Photos Model Clamp grip window, Two dogs, weld-in frame door, Interior view Custom sized per customer specs, Most common standard features shown Compression seal edge on top of lower panel Blind dog, TrioVing lockset with escutcheon plate, Exterior Blind dog joining upper and lower panel Mitered corners, Special shape, Clamp-in large view port Custom shape, Interior view Wide window, Steel weld-in frame Interior view of blind dog, TrioVing lockset, Custom shape panel and window Special shape, Flush pocket handles on lower panel, Opening window

3 DOOR Dutch, Standard Duty, Individual Dog Model Layout 1 Layout Model INTERIOR EXTERIOR inches mm Dimensions For options A Bottom of Clear Glass to Bottom Rough Opening B Clear Glass Height C Top of Clear Glass to Top of Rough Opening, min 7 D Clear Glass Width, min side clearance 6 E Handle/Lockset C/L to Bottom Rough Opening S Panel Split Height EXTERIOR HANDING EXTERIOR Scale None All Rights reserved

4 PANEL Fabricated, Standard Duty series 1X10 Panel 1 Panel Sealing Performance Weather Tight Availability 1110 Single Dutch French All Rights reserved Degree of watertightness depends on panel and coaming construction, number of dogs, proper installation and sealing adjustment. Closures are individually defined, specified and fabricated for each application.

5 DOOR - Coaming, Weather Tight Model Coaming mm mm mm CLEAR OPENING mm ROUGH OPENING mm mm = CLEAR 2.62 OPENING mm OVERALL WIDTH OR HEIGHT ROUGH = CLEAR mm mm mm mm Coaming mm mm mm mm Coaming Assembly No Gasket Seal Stop Type 1 Wide Flat Gasket in Coaming 3/4 Wide Flat Gasket in Coaming Coaming Material Coaming Configuration Extrusion w/ Flange Corner Radius - Rough 4.1 / 104mm Stop Type / Material / Degree of watertightness depends on panel and coaming construction, number of dogs, proper installation and sealing adjustment. Closures are individually defined, specified and fabricated for each application. All Rights reserved

6 DOOR - Coaming, Weather Tight, Options Model Coaming " 101.6mm 4.00" 101.6mm 1.35" 34.3mm 1.35" 34.3mm 1.00" 1.37" 34.8mm.37" 9.4mm 1.00".31" 7.9mm - Flat Bar, 4.00" x.37", No Flange Stop -, 1.00" wide Steel - Flat Bar, 4.00" x.31", No Flange Stop -, 1.00" wide " 76.2mm 4.00" 101.6mm mm 6.00" 152.4mm 1.35" 34.3mm Coaming 1.00" 1.35" 34.3mm.25" 6.4mm mm mm mm 1.00".25" 6.4mm Steel - Angle, 4.00 x 3.00 x.25, Stop -, 1.00" wide Flat Bar 4.00 x 3/8 Stop -, 1.00 wide Flat Bar 6.00" X.25", Stop, " wide Degree of watertightness depends on panel and coaming construction, number of dogs, proper installation and sealing adjustment. Closures are individually defined, specified and fabricated for each application. All Rights reserved

7 DOOR - Coaming, Weather Tight, Options Model Coaming mm mm mm mm mm mm Coaming Degree of watertightness depends on panel and coaming construction, number of dogs, proper installation and sealing adjustment. Closures are individually defined, specified and fabricated for each application. All Rights reserved

8 DOG HANDLE Set individual Handles 1 Available on Door: Handle NO BEARING Handle inside DOG ONLY, no BEARING no outside dog Hex option - Removable handle option Inside Dog Only, No Bearing no outside dog outside spindle head visible Handle Available on Door: Handles Handle FLUSH, no bearing outside & inside Scale None All Rights reserved

9 DOG HANDLE Set individual Handles 2 Available on Door: Handle Cam follower Handle Inside dog only, Cam follower no outside dog Handle Bi-Square Outside / Dog inside, Cam follower Handles removable Handles Concealed Handle Handle concealed, Edge-of-Panel Scale None All Rights reserved

10 DOOR Hinges Hinges 1 Available on Door: Butt Hinge adjustable stop coamings 4.5 x 4.5, 6.0 x 4.5, 8.0 x 6.0 Polished Satin (1X10 series requires butt hinge) Polished Butt Hinge, With Dome Pin fixed or adjustable stop coamings 4.5 x 4.5 Available on Door: Butt Hinge fixed stop or adjustable stop coamings 4.5 x 4.5 Polished Satin (1X10 series requires butt hinge) Polished Butt Hinge, With Dome Pin adjustable stop coamings 4.5 x 4.5, 6.0 x 4.5, 8.0 x 6.0 Hinges Scale None All Rights reserved

11 DOOR Hinges Hinges (Hinge shown is in flange extrusion) Painted Vibratory Weld-on Flush Hinge Blade Hinge Painted Vibratory Weld-on Bolt-to-coaming Painted Vibratory Euro Hinge NOTE: Yoke hinges remain in clear opening space even though door panel swings completely out of opening. Maximum opening Yoke Hinge (Concealed) universal, with rubber bumpers Polished Painted Vibratory Hinges Scale None All Rights reserved

ISO 9001:2008

ISO 9001:2008 DOOR Dutch, Heavy Duty, Individual Dog Model Features 1 FREEMAN MARINE Dutch doors perform like a single panel door when regular access is needed, yet the top half can be operated separately from the bottom

More information

DOOR French, Heavy Duty, Individual Dog Model 1620 Features 1

DOOR French, Heavy Duty, Individual Dog Model 1620 Features 1 DOOR French, Heavy Duty, Individual Dog Model Features 1 When wider access is needed, FREEMAN MARINE French doors perform like two single panel doors that seal to each other. The same high quality tooling

More information

ISO 9001:2008

ISO 9001:2008 HATCH Single Leaf, Premium Duty, Individual Dog Model 3130 Features FREEMAN MARINE custom fabricated Premium Duty hatches offer a wide range of options to meet virtually any specification. Rugged construction

More information

Galley Salon Entry Felt Strip Weather Sealed Economical Versatile Precision Crafted Panels Painted Noise-isolating Rollers Quality Latches and Hardware Custom Sized Windows Flat and Knuckle Panels Single

More information

Durulite Door Hardware Manual

Durulite Door Hardware Manual R Durulite Door Hardware Manual World s Leading Manufacturer Of Traffic Doors Cincinnati, Ohio and Redmond, Oregon Phone: 1-800-543-4455 FAX: 1-800-245-7045 Www.chasedoors.com TABLE OF CONTENTS DESCRIPTION

More information

Cincinnati, Ohio and Redmond, Oregon Phone: Fax:

Cincinnati, Ohio and Redmond, Oregon Phone: Fax: Durulite Retailer Hardware Manual Durulite Retailer Hardware Manual World s Leading Manufacturer Of Traffic Doors Cincinnati, Ohio and Redmond, Oregon Phone: 1-800-543-4455 Fax: 1-800-245-7045 www.chasedoors.com

More information

THE ENCLOSURE HARDWARE SUPPLIER

THE ENCLOSURE HARDWARE SUPPLIER FABTECH SUPPLY THE ENCLOSURE HARDWARE SUPPLIER Our Products JIC Style Enclosures JIC Style Cover Clamp Bracket... 5 JIC Style Cover Clamp... 6 JIC Style Cover Clamp Assembly... 6 JIC Cover Clamp Screws...

More information

Door, Hatch & Interior Fittings

Door, Hatch & Interior Fittings Sea Blue Security Locks NEW 10 Year Guarantee Sea Blue Security locks have been developed in the lock capital of England to withstand both corrosion and physical attack. Heavy steel full casings are used

More information

SAF-T-LINER MVP-ER PARTS MANUAL. Doors Section. Page 4-1. Doors 10/96

SAF-T-LINER MVP-ER PARTS MANUAL. Doors Section. Page 4-1. Doors 10/96 Doors Section Doors Page 4-1 Stepwell - Outward Opening Page 4-2 Doors Stepwell - Outward Opening Item Part Num. Number Qty. Description Notes 1 47001449 1 Trim - Step, Entrance, Diamond Plate 2 47001450

More information

Double Full Doors Single Full Door Keyless Entry Available

Double Full Doors Single Full Door Keyless Entry Available Double Full Doors A The Double Full door option offers There are two things that naturally make hard work easier the right tool and the skill to make it work. The A.R.E. Deluxe Commercial Unit does both.

More information

Section Traffic Doors

Section Traffic Doors Section 08380 Traffic Doors SR 9000 Series Part 1: General 1.1 Summary 1. ABS outer skin, foamed in place insulated High Impact Traffic Doors. 2. Lower hinge guards 3. Spring Bumpers, Impact Plates 4.

More information

Section Traffic Doors

Section Traffic Doors Section 08380 Traffic Doors RT 9000 Series Part 1: General 1.1 Summary 1. ABS outer skin, foamed in place insulated High Impact Traffic Doors. 2. Lower hinge guards 3. Spring Bumpers, Impact Plates 4.

More information

ACCESS DOORS. Model Model Model Model Model

ACCESS DOORS. Model Model Model Model Model MODEL 0840-6 PLENUM CCESS DOOR Nailor Model 0840-6 ultra-low leakage plenum access door provides easy access to larger plenums and equipment housings and is suitable for use in high, medium or low pressure

More information

Contents TRANSOM CLOSER 690 SERIES 23 LOCK OF GLASS DOOR 800 SERIES 24 AUTO HINGE 820 SERIES 25 PANIC EXIT DEVICE 910 SERIES 26

Contents TRANSOM CLOSER 690 SERIES 23 LOCK OF GLASS DOOR 800 SERIES 24 AUTO HINGE 820 SERIES 25 PANIC EXIT DEVICE 910 SERIES 26 www.usaf.com.tw Contents ELECTRIC STRIKE 100 SERIES 1 E-SAVE SLIDER 171 SERIES 2 SHOWER HINGE 230 SERIES 3 SHOWER HINGE 240 SERIES 4 FREE HINGE 20 SERIES GLASS CONNECTOR 280 SERIES 6 PVC GASKET 290 SERIES

More information

9560 Series Senior Swing. Features. Special Templates. Cover Fasteners Mounting. Certifications

9560 Series Senior Swing. Features. Special Templates. Cover Fasteners Mounting. Certifications Senior Features The 9560 SENIOR SWING by LCN is an ADA door operator that is a two-in-one swing door operator. SENIOR SWING operators when activated, opens doors automatically for wheelchair access, yet

More information

ARCHITECTURAL HARDWARE 'ALL-GLASS' ENTRANCE AND STOREFRONT SYSTEMS HEAVY GLASS DOOR SYSTEMS STRUCTURAL GLASS FITTINGS

ARCHITECTURAL HARDWARE 'ALL-GLASS' ENTRANCE AND STOREFRONT SYSTEMS HEAVY GLASS DOOR SYSTEMS STRUCTURAL GLASS FITTINGS 08-OPENINGS ARCHITECTURAL HARDWARE GLASS ENTRANCES AND STOREFRONTS 'ALL-GLASS' ENTRANCE AND STOREFRONT SYSTEMS HEAVY GLASS DOOR SYSTEMS S TA C K I N G P A R T I T I O N S Y S T E M C O M M E R C I A L

More information

Design Guidelines and Standards Manual University of Cincinnati

Design Guidelines and Standards Manual University of Cincinnati SECTION 08710D - A. SPECIFICATIONS FORMAT 1. It is preferred that this section include all items of door hardware. Window hardware and operators should be specified in the window section. This approach

More information

9550 Series Senior Swing. Features. Special Templates. Certifications. Fasteners Mounting

9550 Series Senior Swing. Features. Special Templates. Certifications. Fasteners Mounting Senior Features The 9550 SENIOR SWING by LCN is an ADA door operator that is a two-in-one swing door operator. SENIOR SWING operators when activated, opens doors automatically for wheelchair access, yet

More information

9530 Series Senior Swing. Features. Special Templates. Fasteners Mounting. Certifications

9530 Series Senior Swing. Features. Special Templates. Fasteners Mounting. Certifications Features The 9530 SENIOR SWING by LCN is an ADA door operator that is a two-in-one swing door operator. SENIOR SWING operators when activated, opens doors automatically for wheelchair access, yet allows

More information

makes sure products are delivered Products are offered in steel,

makes sure products are delivered Products are offered in steel, Residential Construction Features Residential Registers, Grilles & Diffusers No one satisfies the demands for For example: an electro-deposition air distribution solutions better than paint creates a flawless

More information

CENTERLINE GLASS RAILING - NEW! 2.5 Post System Mechanical/Welded Combo Accepts 7/16 and 9/16 Glass Tested and Engineered System

CENTERLINE GLASS RAILING - NEW! 2.5 Post System Mechanical/Welded Combo Accepts 7/16 and 9/16 Glass Tested and Engineered System CENTERLINE 2.5 Post System Mechanical/ Combo Accepts 7/16 and 9/16 2.5 Post 28-60-735 Round Top Cap 28-63-700 Intermediate Rail Option - 28-63-720 Alternate Radius Top Cap - 28-63-710 Option 2.5 Rail Post

More information

OPTIONAL PANEL MOUNTING FLANGES. Case shown with optional feature.

OPTIONAL PANEL MOUNTING FLANGES. Case shown with optional feature. CENTURION CENTURION The watertight Centurion Polaris Series from ZERO Manufacturing, Inc. features deep-drawn heat-treated aluminum case shells with wrinkle-free surfaces, accented by distinctive styling

More information

SECTION DUCTWORK ACCESSORIES

SECTION DUCTWORK ACCESSORIES SECTION 15910 DUCTWORK ACCESSORIES PART 1- GENERAL SCOPE This sections includes accessories used in the installation of duct systems. Included are the following topics: PART 1- GENERAL Related Work Reference

More information

EXTRUDED ALUMINUM BALANCED DOORS AND ENTRANCES

EXTRUDED ALUMINUM BALANCED DOORS AND ENTRANCES WIKK INDUSTRIES, INC. MasterFormat 95 SECTION 08480 MasterFormat 04 SECTION 08 42 36 EXTRUDED ALUMINUM BALANCED DOORS AND ENTRANCES PART 1 GENERAL 1.1 DESCRIPTION A. Work included: Entrance and vestibule

More information

Incorporating V2.1. Product spec >>> > Series WL - Standard weather louvres

Incorporating V2.1. Product spec >>> > Series WL - Standard weather louvres Incorporating V2.1 Product spec >>> > Series WL - Standard weather louvres Louvres Standard Recoended for: Exterior walls Intake & return Overview Good rain protection Flanged, recessed and reversed available

More information

SECTION METAL LOCKERS. A. ADAAG - Americans with Disabilities Act, Accessibility Guidelines.

SECTION METAL LOCKERS. A. ADAAG - Americans with Disabilities Act, Accessibility Guidelines. Section 10_51_13_MetalLockerPenco-ProTough_8-19-09 PART 1 GENERAL SECTION 10 51 13 METAL LOCKERS 1.01 SECTION INCLUDES A. Heavy Duty Welded Tubular Frame Lockers. B. Locker benches. 1.02 REFERENCES A.

More information

9550 SERIES FEATURES OPERATOR MOUNTS SIMULTANEOUS PAIR, SURFACE MOUNT *PULL SIDE PUSH SIDE DOUBLE EGRESS

9550 SERIES FEATURES OPERATOR MOUNTS SIMULTANEOUS PAIR, SURFACE MOUNT *PULL SIDE PUSH SIDE DOUBLE EGRESS MOUNTS SIMULTANEOUS PAIR, SURFACE MOUNT *PULL SIDE PUSH SIDE DOUBLE EGRESS 9550 SERIES The 9550 SENIOR by LCN is an ADA door operator that is a two-in-one swing door operator. SENIOR operators when activated,

More information

SERIES 700 TECHNICAL DETAILS MONDAY, JANUARY 21, 2008

SERIES 700 TECHNICAL DETAILS MONDAY, JANUARY 21, 2008 SERIES 700 TECHNICAL DETAILS 1. Table of Contents 2. Overall Specifications 3. Overall Preassembled Door Dimensions 4. Door Leaf Dimensions 5. Door Leaf Construction 6. Cylindrical Lock Preparation 7.

More information

Superior by Design. Euro vista wood impact/non impact rated wood folding door systems

Superior by Design. Euro vista wood impact/non impact rated wood folding door systems Superior by Design. Euro vista wood impact/non impact rated wood folding door systems Approved for use in Miami-Dade HVHZ Zones Florida Building Code Approved Product Approval FL 15472 www.euro-wall.com

More information

Pre-Packaged Hardware

Pre-Packaged Hardware New! Pre-Packaged Hardware Panel & Pilaster Packs 2-Ear Wall Bracket Headrail Bracket Wrap-Around Pivot Hinge () Strike / Keeper (Outswing) Slide (Outswing) Door Stop Door Hardware Packs The Story Originally

More information

Driver Side Support Bracket pictured in "no-tow hook" direction. Reverse direction for tow hook equipped vehicles

Driver Side Support Bracket pictured in no-tow hook direction. Reverse direction for tow hook equipped vehicles PARTS LIST: 1 Bull Bar 2 10-1.5mm x 35mm Hex Bolts 2 Tube Brackets (Bull Bar) passenger or driver side 2 10mm Lock Washers 2 Upper Frame Brackets (models w/o tow hooks only) 4 10mm x 27mm OD x 3mm Flat

More information

in no time. Sealed TRUMPF seam lockers: Perfect for Pittsburgh seams. Fastening

in no time. Sealed TRUMPF seam lockers: Perfect for Pittsburgh seams. Fastening TRUMPF seam lockers: Sealed in no time. Perfect for Pittsburgh seams. Whether working with standing, angular or Pittsburgh seams, TRUMPF seam lockers offer fast, reliable and portable sealing for assembly

More information

KAWNEER 1686 EL CONCEALED EXIT DEVICE

KAWNEER 1686 EL CONCEALED EXIT DEVICE FEBRUARY, 2012 1 ROD AND CENTER CASE ASSEMBLY: 1) For inactive doors or doors without exterior cylinder, or doors without the need for exterior cylinder dogging, the removal of the cylinder dogging pawl

More information

Strikeplates for Locks

Strikeplates for Locks Strikeplates for Locks STONE 2/₄ 3 Bright Brass 5 Antique Brass /₂ 3/₄ 2 2/₂ 3 4 P Vintage Bronze NOTE: width of lip strikes measured from center of screw holes to end of lip Jeske no. 5 Satin Nickel 26

More information

Superior Products for your Woodie Wagon

Superior Products for your Woodie Wagon .. Customs Classics & Rods.. Since 1988 Superior Products for your Woodie Wagon Under construction 2009 catalog #7.2 Preston Wilson s 1950 Ford Woodie 2008 SEMA Convention Tom Fritz Shop Phone: (763) 241-1252

More information

Hale Trailer Brake & Wheel, Inc. HYUNDAI Refrigerated Van 2018

Hale Trailer Brake & Wheel, Inc. HYUNDAI Refrigerated Van 2018 HYUNDAI 889001-889012 Refrigerated Van 2018 GVWR GVWR: VIN Plate: Product Type: Product Class: Trailer to meet 68,000# GVWR Canadian/Transport Canada Compliant VIN Plate to read in English and French,

More information

EXTRUDED ALUMINUM TEMPERED GLASS BALANCED DOORS AND ENTRANCES

EXTRUDED ALUMINUM TEMPERED GLASS BALANCED DOORS AND ENTRANCES WIKK INDUSTRIES, INC. MasterFormat 95 SECTION 08480 MasterFormat 04 SECTION 08 42 36 EXTRUDED ALUMINUM TEMPERED GLASS BALANCED DOORS AND ENTRANCES PART I GENERAL 1.1 DESCRIPTION A. Work included: Entrance

More information

Superior by Design EURO (3876)

Superior by Design EURO (3876) Superior by Design. Euro-C2 Aluminum Folding Door System www.euro-wall.com 888.989.EURO (3876) Specifications Euro-C2 Exterior Aluminum Folding Door System Maximum / Minimum Specifications Max Panel Weight:

More information

Installation Instructions - D-Series Warming Cabinet Instruction Door for Hinge UseReversal (Glass and Stainless Steel Doors)

Installation Instructions - D-Series Warming Cabinet Instruction Door for Hinge UseReversal (Glass and Stainless Steel Doors) Header Cam Lock Reversal... pg 1-4 Glass Door hinge reversal..... pg 5-9 Steel Door hinge reversal..... pg 10-13 Remove Panels Before reversing door hinges, the Header Cam Lock assembly must be reversed.

More information

ISO DRY CONTAINER REPAIRING SPARE PARTS CATALOG Edition

ISO DRY CONTAINER REPAIRING SPARE PARTS CATALOG Edition ISO DRY CONTAINER REPAIRING SPARE PARTS CATALOG 2015 Edition NO. ITEM PART NO. SIZE SPEC PAGE 1 Roof Panel CIMC-D01-01 2.0X1045X2356 5 Corr. 1 CIMC-D01-05 2.0X1045X600 5 Corr. Patch CIMC-D01-05-2 2.0X1045X1200

More information

standard design options sight glass weld pad type optional features

standard design options sight glass weld pad type optional features standard design wetted material: ASTM SA-240 316LSS; non-wetted: 304SS with studs and hex nuts with non asbestos gaskets with tempered borosilicate glass sight glass weld pad type options materials: HC-276,

More information

2850 Series Senior Swing. Features. Special Templates. Certifications. Fasteners Mounting

2850 Series Senior Swing. Features. Special Templates. Certifications. Fasteners Mounting Features The 2850 SENIOR SWING by LCN is an ADA door operator that is a two-in-one swing door operator. SENIOR SWING operator when activated, opens doors automatically for wheelchair access, yet allows

More information

Sheet metal work. Mechanisms and accessories

Sheet metal work. Mechanisms and accessories Sheet metal work GENERAL LOWER STRUCTURE UPPER SIDE STRUCTURE UPPER REAR STRUCTURE TOP OF BODY Mechanisms and accessories EXTERIOR PROTECTION JE0 AL - JE0 EL - JE0 HL 77 11 196 742 DECEMBER 1997 Edition

More information

Telescopic Cover Support

Telescopic Cover Support 6-170.01 Telescopic Cover Support long, steel zinc plated Telescopic Cover Support for covers and desk-leafs with automatic locking and release device. Extending the telescopic cover support completely,

More information

Alignment Spec. Power Rack & Pinion: 5 degrees positive Camber 0 degrees Toe-In 1/32

Alignment Spec. Power Rack & Pinion: 5 degrees positive Camber 0 degrees Toe-In 1/32 333-TCIE237 1967-1969 Chevy Camaro Front Suspension 1968-1972 Chevy Nova Front Suspension 1967-1969 Pontiac Firebird Front Suspension 1-800-984-6259 www.totalcostinvolved.com 1967-1969 Chevy Camaro Front

More information

Chevrolet 1500HD 135. Chevrolet 2500HD 135. Ford E150SD 138. Ford E250SD 138

Chevrolet 1500HD 135. Chevrolet 2500HD 135. Ford E150SD 138. Ford E250SD 138 The following specifications are provided in order to describe and specify the design, construction, materials and equipment utilized and installed in the fabrication of a Swab Model ARF-6V Modular Fiberglass

More information

STORM DOORS & PORCH ENCLOSURES

STORM DOORS & PORCH ENCLOSURES STORM DOORS & PORCH ENCLOSURES built for living...engineered for life! group of companies ALUMINUM storm doors FEATURES Self lubricating hinges Heavy wall extruded aluminum frame Diecast internal miter

More information

AIRCRAFT FINISHING Assembling the Front Seat Frames

AIRCRAFT FINISHING Assembling the Front Seat Frames AIRCRAFT FINISHING Assembling the Front Seat Frames Front Seat (shown with custom leather upholstery) The front seat frame assembly is supplied without upholstery. The seat back is hinged at the bottom

More information

Multi-Point Lock Systems. Manufacturer & Wholesaler of Winly Products

Multi-Point Lock Systems. Manufacturer & Wholesaler of Winly Products ARCHITECTURAL, DESIGNER, BUILDER HARDWARE Multi-Point Lock Systems... 1 Gripsets... 4 Lever Handlesets... 12 Interior & Exterior Matching Sets... 14 Mortise Handlesets... 16 European Style Levers... 17

More information

HiBoy Maverick/Commander Doors Part # HiBoy4 Maverick/Commander Doors Black

HiBoy Maverick/Commander Doors Part # HiBoy4 Maverick/Commander Doors Black Racing 3191 N Washington St. Suite 2 Chandler, AZ 85225 1 (800) 708-9803 http://www.racing.com HiBoy Maverick/Commander Doors Part # 07-2001 HiBoy4 Maverick/Commander Doors Black Congratulations on your

More information

SWING DOOR SOFT ENCLOSURE (part# 16733)

SWING DOOR SOFT ENCLOSURE (part# 16733) 800-643-7332 americanlandmaster.com This kit is for use with all fullsize, 2 passenger ALM utility vehicles. SWING DOOR SOFT ENCLOSURE (part# 16733) NOTE TOOLS REQUIRED Drill 1/4 Drill Bit 7/16 Wrench

More information

Aluminium Sliding Door System

Aluminium Sliding Door System Aluminium Sliding Door System This system focuses on modern, sharp lines which are the result of the small radii achieved in the design of the aluminium sections. It allows designers to create distinctive

More information

VENTILATION Opal Hatches Hatch Vent

VENTILATION Opal Hatches Hatch Vent Opal Hatches Onepiece aluminum lid with a thick frame section to provide optimum rigidity Slim, 3/4" (19mm) lid height Must be mounted on a flat surface CE approved areas: II, III, and IV Adjustable stay

More information

8600 SERIES. SPACE$SAVER DOORWARE Page C SPACE$SAVER. Page C-6. PREMIER DOORWARE Page C-11 ASSURED EXCELLENCE 8200 SPACE$SAVER

8600 SERIES. SPACE$SAVER DOORWARE Page C SPACE$SAVER. Page C-6. PREMIER DOORWARE Page C-11 ASSURED EXCELLENCE 8200 SPACE$SAVER 8200 SPACE$SAVER 8000 PREMIUM 8600 SINGLE CONTENTS 8200 SERIES SPACE$SAVER DOORWARE Page C-2 8200 SPACE$SAVER 8200 SELF-CLOSING SPACE$SAVER Quick, easy horizontal sliding door operation with these space

More information

422 Series. Cam Action Door Closer

422 Series. Cam Action Door Closer Cam Action Door Closer Copyright SARGENT Manufacturing Company 2005-2018. All rights reserved. Reproduction in whole or in part without the express written permission of Sargent Manufacturing Company is

More information

TruckSkin F.A.Q.s and Tips

TruckSkin F.A.Q.s and Tips 1 TruckSkin F.A.Q.s and Tips Here are some helpful answers and tips for your self installation. You can see more installation information on our website TruckSkin.com Please contact us with any questions.

More information

9540 SERIES FEATURES SINGLE DOOR, SURFACE MOUNT (PUSH) OFFSET PIVOT/BUTT HINGE

9540 SERIES FEATURES SINGLE DOOR, SURFACE MOUNT (PUSH) OFFSET PIVOT/BUTT HINGE SINGLE DOOR, SURFACE MOUNT (PUSH) OFFSET PIVOT/BUTT HINGE 9540 SERIES The 9540 SENIOR SWING by LCN is an ADA door operator that is a two-in-one swing door operator. SENIOR SWING operators when activated,

More information

4840 with EDA arm and 459 Door Loop

4840 with EDA arm and 459 Door Loop PARALLEL ARM (PUSH SIDE) MOUNTING The 4840 AUTO EQUALIZER is LCN s pneumatically powered MULTI- DOOR solution. This low-energy automatic operator provides easy access for people with disabilities, or the

More information

INSTALLATION INSTRUCTION BULL BAR DODGE RAM 1500 PART NUMBER

INSTALLATION INSTRUCTION BULL BAR DODGE RAM 1500 PART NUMBER INSTALLATION INSTRUCTION 09-12 DODGE RAM 1500 PART NUMBER - 200691 PARTS LIST: Qty Description Qty Description 1 Bull Bar 10 12mm Lock Washers 2 Upper Frame Mounting Brackets (for trucks without tow hooks

More information

I-Sheet Number Rev.B 3-1/2 OVAL BULL BAR DODGE RAM 1500

I-Sheet Number Rev.B 3-1/2 OVAL BULL BAR DODGE RAM 1500 PARTS LIST: 1 Bull Bar 2 10-1.5mm x 35mm Hex Bolts 2 Tube Brackets (Bull Bar) passenger or driver side 2 10mm Lock Washers 2 Upper Frame Brackets (models w/o tow hooks only) 4 10mm x 27mm OD x 3mm Flat

More information

350/500 Heavy Wall TM Entrances 1

350/500 Heavy Wall TM Entrances 1 350/500 Heavy Wall TM Entrances 1 FEATURES Features 350 medium stile has 3-1/2" (88.9) vertical stile, 3-1/2" (88.9) top and 6-1/2" (165.1) bottom rail 500 wide stile has 5" (127) vertical stile, 5" (127)

More information

INTERIOR INSTALLATION

INTERIOR INSTALLATION HOOK ON CROSS CONNECTOR CLAMP AT ALL INTERSECTIONS OF S 4-1 4" PANEL 1/2" x 1-1/2" 16 GA CR CHANNEL PRIMARY AT 48" O.C. MAX SPACING, TYPICAL. PANEL 1 1 2 " 12 GA HANGER WIRE, BY OTHERS, NOT BY HUNTER DOUGLAS.

More information

Telescopic Cover Support

Telescopic Cover Support 6-170.01 Telescopic Cover Support long, steel zinc plated Telescopic Cover Support for covers and desk-leafs with automatic locking and release device. Extending the telescopic cover support completely,

More information

A. Product Data: For each type of product. TLC ENGINEERING FOR ARCHITECTURE - PROJECT NO AIR DUCT ACCESSORIES

A. Product Data: For each type of product. TLC ENGINEERING FOR ARCHITECTURE - PROJECT NO AIR DUCT ACCESSORIES SECTION - PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification Sections, apply to this

More information

Factory Five Racing, Inc. 818 Kit Assembly manual revision 1J update

Factory Five Racing, Inc. 818 Kit Assembly manual revision 1J update Factory Five Racing, Inc. 818 Kit Assembly manual revision 1J update Turbo coolant overflow tank...1 Shifter handle...4 Install...4 Door skin...7 Door Liner... 10 Side mirrors... 14 Door handles and pulls...

More information

NEWTON KWIK DUMP WATER VALVES

NEWTON KWIK DUMP WATER VALVES NEWTON KWIK DUMP WATER VALVES ***ALL VALVES AVAILABLE WITH SQUARE FLANGE, SEE MISCELLANEOUS ***FINISH PAINT AVAILABLE- SEE ACCESSORY PRICING *** All MILD STEEL VALVES POWDER COATED ZINC PRIMER & FINISH

More information

A NEW GENERATION OF DOORS FOR TEMPERATURE CONTROLLED ENVIRONMENTS

A NEW GENERATION OF DOORS FOR TEMPERATURE CONTROLLED ENVIRONMENTS A NEW GENERATION OF DOORS FOR TEMPERATURE CONTROLLED ENVIRONMENTS QUALITY, DURABILITY & HIGH PERFORMANCE Wood Free Construction Superior Sealing Energy Efficient The ICS door designs incorporate the latest

More information

1) Page: REV 5: Changed depiction to show added hardware and T-01220

1) Page: REV 5: Changed depiction to show added hardware and T-01220 REVISION DESCRIPTION: 1) Page: 37-01 REV 5: Changed depiction to show added hardware and T-01220 Page: 37-02 REV 4: Added Figure 3 depicting Separating the T-01220 Doublers. Figure 4 was Figure 3. Added

More information

SERIES 500 TECHNICAL DETAILS THURSDAY, JANUARY 24, 2008

SERIES 500 TECHNICAL DETAILS THURSDAY, JANUARY 24, 2008 SERIES 500 TECHNICAL DETAILS 1. Table of Contents 2. Overall Specifications 3. Door Overall Dimensions 4. Door Construction 5. Total Preassembled Dimensions 6. Overall Frame Dimensions 7. Frame Profile

More information

LCN 4310ME SERIES FEATURES HINGE (PULL) SIDE MOUNTING. The 4310ME SENTRONIC is a. heavy duty, electrically controlled

LCN 4310ME SERIES FEATURES HINGE (PULL) SIDE MOUNTING. The 4310ME SENTRONIC is a. heavy duty, electrically controlled HINGE (PULL) SIDE MOUNTING The 4310ME SENTRONIC is a heavy duty, electrically controlled closer/holder designed to provide infinitely adjustable hold-open for FEATURES fire and smoke barrier doors. Door

More information

Page 1 Monumental Blank Entrances Applied Hardware & Preps, Tubelite Standard Hardware

Page 1 Monumental Blank Entrances Applied Hardware & Preps, Tubelite Standard Hardware Page 1 Monumental Blank Entrances Applied Hardware & Preps, Tubelite Standard Hardware Butt Hinges Pivots Pull Handles/Push Bars Heavy Duty P094 Mortised Butt Hinge P094MD P094MF (includes P2093 $ 123

More information

SINCE SMARTER. BETTER.

SINCE SMARTER. BETTER. SINCE 1914. SMARTER. BETTER. A LEGACY OF INNOVATION. A COMMITMENT TO QUALITY. It has long been a family tradition of Utility Trailer Manufacturing Company to lead by design innovation and engineering advances.

More information

NON-SIZED SIZED HANDED

NON-SIZED SIZED HANDED HINGE (PULL) SIDE MOUNTING 4310ME SERIES The 4310ME SENTRONIC is a heavy duty, electrically controlled closer/holder designed to provide infinitely adjustable hold-open for fire and smoke barrier doors.

More information

INSTALLATION OF THE ENCLOSURE FOR THE MULE 3010 TRANS INSTALLATION GUIDE FOR THE MULE 3000 TRANS ENCLOSURE P. 1. Sept 07

INSTALLATION OF THE ENCLOSURE FOR THE MULE 3010 TRANS INSTALLATION GUIDE FOR THE MULE 3000 TRANS ENCLOSURE P. 1. Sept 07 INSTALLATION GUIDE FOR THE MULE 3000 TRANS ENCLOSURE P. 1 INSTALLATION OF THE ENCLOSURE FOR THE MULE 3010 TRANS Sept 07 www.essexmfg.com PO Box 92864 Southlake, TX 76092 Ph:888-643-7739 INSTALLATION GUIDE

More information

4040XPT Series Door controls

4040XPT Series Door controls 4040XPT Series Door controls Fire Rated: Tested on fire door assemblies in accordance with Australian Standards, refer fire door manufacturer for specific approval details The LCN 4040XPT Series is a non-handed,

More information

STORM DOORS & PORCH ENCLOSURES

STORM DOORS & PORCH ENCLOSURES STORM DOORS & PORCH ENCLOSURES built for living...engineered for life! ALUMINUM LTD. ALUMINUM storm doors FEATURES Self lubricating hinges Heavy wall extruded aluminum frame Diecast internal miter corners

More information

THE NEW HARDWARE SYSTEM ALU 540. Roto ALU 540. FB 44-0 GB July 2005 Alu B.U./J.S. (Translation: Prunty 9/05)

THE NEW HARDWARE SYSTEM ALU 540. Roto ALU 540. FB 44-0 GB July 2005 Alu B.U./J.S. (Translation: Prunty 9/05) THE NEW HARDWARE SYSTEM ALU 540 1 APPLICATION RANGE Hinge-side compatible with all conventional Euro-chamber profiles Clampable hinge-side with preassembled clamp-strips Available for all standard opening

More information

4310ME Series. Features E25. Special Templates. Certifications. Cover Fasteners Mounting Arms

4310ME Series. Features E25. Special Templates. Certifications. Cover Fasteners Mounting Arms 4310ME Features The 4310ME SENTRONIC is a heavy duty, electrically controlled closer/holder designed to provide infinitely adjustable hold-open for fire and smoke barrier doors. Door is held open until

More information

ROOF HATCHES. Over 45 years of proven performance in Standard & Custom Designed Hatches SINCE 1965 NOW WITH R-20 INSULATED ROOF HATCHES!

ROOF HATCHES. Over 45 years of proven performance in Standard & Custom Designed Hatches SINCE 1965 NOW WITH R-20 INSULATED ROOF HATCHES! ROOF HATCHES SINCE 1965 NOW WITH R-20 INSULATED ROOF HATCHES! Over 45 years of proven performance in Standard & Custom Designed Hatches ROOF HATCHES Better by design LEXCOR COMPANY PROFILE Lexcor was incorporated

More information

Allegis Outswing Latch Installation

Allegis Outswing Latch Installation Allegis Latch Kit F E D B A A B Latch Mechanism Foam Gasket C Tinnerman Escutcheon G D Lock Nut C E Roller Cam J F G Inside Handle Flange Nut H Outside Door Handle I H I J Machine Screw Screw Cover Plug

More information

NON-SIZED SIZED HANDED

NON-SIZED SIZED HANDED 4410ME SERIES TOP JAMB (PUSH SIDE) MOUNTING The 4410ME SENTRONIC is a heavy duty, electrically controlled closer/holder designed to provide infinitely adjustable hold-open for fire and smoke barrier doors.

More information

GETO Megaport II Flush rear doors

GETO Megaport II Flush rear doors For body kits, curtainsider kits and other bodywork kits Approved to DIN EN 1262 Code XL Decisive weight advantage GETO Megaport II Flush rear doors TITGEMEYER For all those who have something to say The

More information

CONCEALED CLOSER SERIES

CONCEALED CLOSER SERIES CLOSER SERIES PRODUCT SELECTION GUIDE The concealed LCN closers feature a modern design for concealment in either the head frame or top rail of the door. This guide is based on the desired mounting of

More information

Installation: 4.b. Using Armaflex sheet insulation on pipes. Application to pipes. Application to fittings

Installation: 4.b. Using Armaflex sheet insulation on pipes. Application to pipes. Application to fittings 4.b. Using Armaflex sheet insulation on pipes Application to pipes 1. Apply Armaflex Sheet Insulation on pipes larger than 5 IPS. Cut the sheet insulation to proper width, permitting it to fit loosely

More information

Bohle SlideTec Optima 150 Sliding Door Systems

Bohle SlideTec Optima 150 Sliding Door Systems Bohle SlideTec Optima 150 Sliding Door Systems www.bohle-america.com LEGEND FOR SLIDING By-parting Application types Single panel Pocket door Door mounting / Installation types Wall mounted / Barn Door

More information

Incorporating V2.1. Product spec >>> > Series ECG - Egg crate grilles

Incorporating V2.1. Product spec >>> > Series ECG - Egg crate grilles Incorporating V2.1 Product spec >>> > Series ECG - Egg crate grilles Grilles Egg crate Recommended for: Wall, ceiling & duct Extract Overview Industry standard extract grille Plastic egg crate core optional

More information

1130 Series. Door Closers. SARGENT Manufacturing Company 2004, 2007 All rights reserved

1130 Series. Door Closers. SARGENT Manufacturing Company 2004, 2007 All rights reserved SARGENT Manufacturing Company 2004, 2007 All rights reserved Table of Contents General Information.................................................. 1 Applications........................................................

More information

FOR WOOD AND. Track 600A. Top. Pivot 21B/P. Lock Nut 1. Lock Nut Adjustable Nut 1 (13-28) Nut (5) (5) (155.6) 1 2 (12.7) Flush Bolt F3715

FOR WOOD AND. Track 600A. Top. Pivot 21B/P. Lock Nut 1. Lock Nut Adjustable Nut 1 (13-28) Nut (5) (5) (155.6) 1 2 (12.7) Flush Bolt F3715 PACER MULTIDIRECTIONAL FOR WOOD AND 2 6 52.4) Track 600A ALUMINUM DOORS 2 6 55.5) /2"- /8" -28) /6" Top 2B/P Hanger 2B/MD Lock Lock /2"- /8" -28) 5) 5) /2"- /8" -28) /6" /6" /6" /6" " " Hanger 6B/MD Lock

More information

Disco Automotive Hardware Sulphur, Oklahoma. Bumper Hardware. G.M. Bumper Hardware 11164PK. 50 Pcs. 50 Pcs PK 11142PK. 25 Pcs. 3010PK. 50 Pcs.

Disco Automotive Hardware Sulphur, Oklahoma. Bumper Hardware. G.M. Bumper Hardware 11164PK. 50 Pcs. 50 Pcs PK 11142PK. 25 Pcs. 3010PK. 50 Pcs. 11164PK 4.2-1.41 x 20mm Phillips Washer Head 11mm O.D. Washer Head Black Finish Hi-Lo Thread Bumper Cover Screws G.M. # 22549046 11153PK 11142PK 3010PK 4.2-1.40 x 16mm Phillips Flat Top 8mm O.D. Washer

More information

High Security Closers Series

High Security Closers Series High Security Closers APPLICATIONS n For any concealed or surface mounted installation subject to potential abuse or vandalism. n For correctional, aluminum, hollow metal, or wood doors and frames. n Can

More information

Rail Fittings. Top Fittings Handrail Fittings Handrails Track Fittings Hinge Fittings Head Screws

Rail Fittings. Top Fittings Handrail Fittings Handrails Track Fittings Hinge Fittings Head Screws 5 Top Fittings Handrail Fittings Handrails Track Fittings Hinge Fittings Head Screws Connectors Stanchion & End Fittings Elbow Tees Rail Tees Canvas Fasteners Rail Fittings 5 Rail Fittings BIMINI FITTINGS

More information

EX C E L L E N C E ISO 9001 CERTIFIED COMPANY LINEAR BAR GRILLES.

EX C E L L E N C E ISO 9001 CERTIFIED COMPANY LINEAR BAR GRILLES. 25 YEARS OF EX C E L L E N C E ISO 9001 CERTIFIED COMPANY 3.0 INDEX ISO 9001 CERTIFIED COMPANY SECTION TOPIC PAGE 3.1 Double deflection linear bar grille ASLG 3 3.2 Double deflection linear bar register

More information

KAWNEER 1686 CONCEALED EXIT DEVICE

KAWNEER 1686 CONCEALED EXIT DEVICE FEBRUARY, 2015 1 ROD AND CENTER CASE ASSEMBLY: 1) For inactive doors or doors without exterior cylinder, or doors without the need for exterior cylinder dogging, the removal of the cylinder dogging pawl

More information

INSTALLATION & OWNER S MANUAL

INSTALLATION & OWNER S MANUAL p. 1 of 13 INSTALLATION & OWNER S MANUAL Polaris Ranger 400-EV PathPro SS Cab (fits 2010 - current) (p/n: 1PRG400FS) The contents of this envelope are the property of the owner. Be sure to leave with the

More information

REAR ENGINE RIDER EUROPEAN SERIES 22

REAR ENGINE RIDER EUROPEAN SERIES 22 Parts Manual for REAR ENGINE RIDER EUROPEAN SERIES 22 MODELS E2822BE E2822BE E1522KVE CONTENTS DESCRIPTION PAGE(S) DESCRIPTION PAGE(S) WHEELS, TIRES...2, DRIVE DISC ASSEMBLY... 22 FRONT END, STEERING...4,

More information

INSTALLATION INSTRUCTIONS GRILLE GUARD TOYOTA TUNDRA TOYOTA SEQUOIA PART # P2067

INSTALLATION INSTRUCTIONS GRILLE GUARD TOYOTA TUNDRA TOYOTA SEQUOIA PART # P2067 INSTALLATION INSTRUCTIONS GRILLE GUARD 07-14 TOYOTA TUNDRA 08-14 TOYOTA SEQUOIA PART # P2067 PARTS LIST: GRILLE GUARD 1 Grille Guard 2 10mm Cam Lever Quick Release Bolts with Special Pivot Washer 1 Driver/left

More information

Specification Sheet Doc Rev. 12/15/95

Specification Sheet Doc Rev. 12/15/95 Specification Sheet Doc Rev. 12/15/95 Date: 24 April 1997 MODEL 2000 x 4 ALUMINUM VACUUM PNEUMATIC DRY BULK DRAWING NO Spec. No. 2061 A. VESSEL 1. Capacity 2000 Cubic Feet - Four 45-degree hoppers - 102"

More information

Swing Doors. The New American Standard for Hinged Cold Storage Doors. New and replacement cold storage doors for

Swing Doors. The New American Standard for Hinged Cold Storage Doors. New and replacement cold storage doors for New and replacement cold storage doors for Walk-In Manufacturers Cold Storage Contractors Distribution Centers Food Processing Plants Mass Merchants Supermarkets Convenience Stores Restaurants Colleges

More information

CONCEALED CLOSER SERIES

CONCEALED CLOSER SERIES CONCEALED CLOSER SERIES APPLICATIONS n For aluminum, hollow metal, or wood doors and frames. n Can be used with hinge or pivot mounted door. n Closers for 4 or minimum 1-3/4 head frame or 4 top rail. n

More information

All-steel construction For installation of #16 diffuser when not using a damper. Golden Sand enamel finish. 12 Butterfly Damper

All-steel construction For installation of #16 diffuser when not using a damper. Golden Sand enamel finish. 12 Butterfly Damper 11 Duct Ring All-steel For installation of #16 diffuser when not using a damper Golden Sand enamel finish Size A 6 7-1/2 8 9-1/2 10 10-7/8 12 12-7/8 14 14-7/8 18 18-3/16 11 Available Sizes (in.) 6, 8,

More information