INTERIOR INSTALLATION
|
|
|
- Todd Norton
- 5 years ago
- Views:
Transcription
1 HOOK ON CROSS CONNECTOR CLAMP AT ALL INTERSECTIONS OF S 4-1 4" PANEL 1/2" x 1-1/2" 16 GA CR CHANNEL PRIMARY AT 48" O.C. MAX SPACING, TYPICAL. PANEL " 12 GA HANGER WIRE, BY OTHERS, NOT BY HUNTER DOUGLAS. SEE DETAIL A1.2 1/2" x 1-1/2" 16 GA CR CHANNEL PRIMARY AT 48" O.C. MAX SPACING, TYPICAL. 12 GA HANGER WIRE, BY OTHERS " HOOK ON PANEL FACE DETAIL 'A' HOOK ON PANEL FACE DETAIL 'B' PANEL SEE DETAIL A1.1 SUSPENSION REQUIREMENTS SEE DETAIL A1.2 WALL TRIM CONDITIONS SEE DETAIL A1.4 FLOATING TRIM CONDITIONS SEE DETAIL A1.5 AND A1.6 FIXTURE SEE DETAIL A1.7 THRU A1.9 SPLICE SEE DETAIL A1.3 not be submi tted f or STEEL OVERALL ISOMETRIC VIEW PROJECT: HOOK-ON PRODUCT DRAWING NUMBER: HOOKON-A1.0
2 CROSS CONNECTOR CLAMP PRIMARY " " " 2. SHIFT PANEL IN PLACE 2" 24" MIN LENGTH - MAX LENGTH 1. LIFT PANEL PANEL CONFIGURATIONS: 8" MIN. WIDTH TO 24" MAX. WIDTH 24" MIN. LENGTH TO MAX. LENGTH OTHER SIZES AVAILABLE, CONTACT MATERIAL THICKNESS HOOK-ON PLANKS:.032",.040",.050", OR.063" ALUMINUM PANEL FINISHES PAINTED & POWDER COATED - INTERIOR & EXTERIOR LUXACOTE - INTERIOR & EXTERIOR DECORATED WOOD FINISH (POWDER COATED) - INTERIOR & EXTERIOR SEE TABLE FOR PERFORATION OPTIONS HOOK-ON PLANKS ARE DESCRIBED AS A METAL PANEL 24" TO IN LENGTH. CONSTRUCTED AS DETAILED IN THIS SET. HOOK-ON PLANKS ARE DESIGNED TO BE INSTALLED ON HOOK-ON SUSPENSION SYSTEM. JOINTS BETWEEN PANELS WILL BE BUTT AND FLUSH. FOR PANEL WIDTHS OTHER THAN 24". PLEASE CONTACT. SOME WIDTHS WILL INCUR AN ADDITIONAL TOOLING CHARGE. PERFORATION MAX LENGTH 102 (14.0% OPEN) 103 (20.0% OPEN) 106 (16.0% OPEN) 107 (28.0% OPEN) 72"* 109 (36.0% OPEN) 72" 110 (36.0% OPEN) 60" 111 (4.0% OPEN) *PANEL SIZE LIMITED TO 8 SQUARE FEET PERFORATION OPTIONS PERFORATION MAX LENGTH PERFORATION MAX LENGTH PERFORATION MAX LENGTH 112 (7.0% OPEN) 315 (6.25% OPEN) 114 (5.0% OPEN) 350 (70.0% OPEN) 119 (8.0% OPEN) 122 (5.5% OPEN) 125 (13.0% OPEN) 127 (25.0% OPEN) 132 (20.0% OPEN) 96" 72" 150 (4.0% OPEN) 185 (3.1% OPEN) 201 (19.6% OPEN) 202 (5.43% OPEN) 301 (11.0% OPEN) 312 (33.0% OPEN) 314 (25.0% OPEN) 24" 60" 355 (18.0% OPEN) 375 (25.0% OPEN) 625 (19.5% OPEN) 750 (19.2% OPEN) 24" STEEL PERFORATION: SEE TABLE ABOVE PANEL PROJECT: HOOK-ON PRODUCT DRAWING NUMBER: HOOKON-A1.1
3 STANDARD HOOK-ON FLANGE DETAIL STANDARD LAY-ON FLANGE DETAIL A C B HOOK-ON SYSTEM DIMENSIONS A = 48" MAXIMUM HANGER WIRE B = 48" MAXIMUM 16GA CR CHANNEL C = 12" MAXIMUM OVERHANG D = 24" MIN - MAX LENGTH E = 12" MAXIMUM OVERHANG " HOOK FLANGE 2" E PRIMARY D HOOK-ON SYSTEM COMPONENTS 3 1 = 1/2" x 1-1/2" 16 GA CR CHANNEL 2 = CROSS CONNECTOR CLAMP 3 = HOOK-ON 4 = 2'x4' HOOK-ON PLANK, TYP. 5 = 12 GA HANGER WIRE HDarchitectural.com not be submi tted f or STEEL PERFORATION: SEE TABLE ABOVE SUSPENSION PROJECT: HOOK-ON PRODUCT DRAWING NUMBER: HOOKON-A1.2
4 FASTENING NUT & BOLT, INCLUDED WITH SPLICE SPLICE 'B' SPLICE HOOK ON PANEL FACE 1 4 " APPROX. 'B' SECTION 'A' IF THE DESIRED LENGTH EXCEEDS THE MAXIMUM OF 16'-0", USE A SPLICE TO CONNECT THE FACTORY S. FASTENING NUT CONTINUING SPLICE (UPPER) SPLICE (LOWER) ING THROUGH BOLT SECTION 'B' SCALE: FULL (1:1) STEEL PROJECT: HOOK-ON PRODUCT DRAWING NUMBER: HOOKON-A1.3
5 REMOVED PANEL FIELD CUT 1/2" x 1-1/2" 16 GA CR CHANNEL PRIMARY AT 48" O.C. MAXIMUM SPACING, TYPICAL " DETAIL 'A' 1" BOX MOLD TRIM WITH HOLD DOWN CLIP FIELD MITER TRIM AT CORNER FIELD CUT PANEL 1" BOX MOLD TRIM WITH HOLD DOWN CLIP DETAIL 'B' 12 GA HANGER WIRE, BY OTHERS HOLD DOWN CLIP 24" X 48" HOOK-ON PANEL HOOK-ON CROSS CONNECTOR CLAMP FIELD CUT PANEL STEEL WALL TRIM PROJECT: HOOK-ON PRODUCT DRAWING NUMBER: HOOKON-A1.4
6 4-1/4" 1" BOX MOLD WITH HOLD DOWN CLIP THROUGH FASTEN TO 'FIELD CUT' FLOATING TRIM 12" MAXIMUM OVERHANG, TYP. ADDITIONAL CR CHANNEL FIELD MITER TRIM AT CORNER 1" BOX MOLD WITH HOLD DOWN CLIP THROUGH FASTEN TO 'FIELD CUT' FLOATING TRIM " 1/2" X 1-1/2" 16 GA CRC PRIMARY AT 48" O.C. MAX SPACING, BY OTHERS, TYP. OR PANEL 4-1/4" DETAIL 'A' 1" REMOVED PANEL. FIELD CUT 2" ADDITIONAL CR CHANNEL AS REQ'D 'FIELD CUT' FLOATING PERIMETER TRIM FIELD CUT / MITER 1" 2" DETAIL 'B' 12 GA HANGER WIRE, BY OTHERS HOOK-ON CROSS CONNECTOR CLAMP HOLD DOWN CLIP FIELD CUT PANEL 24" X 48" HOOK-ON PANEL *BOX MOLD TRIM & HOLD DOWN CLIP OMITTED FOR CLARITY STEEL FIELD CUT FLOATING TRIM PROJECT: HOOK-ON PRODUCT DRAWING NUMBER: HOOKON-A1.5
7 4-1/4" DETAIL 'A' 12" MAXIMUM CANTILEVER.063" 1x1 ANGLE, 1/2" x 1-1/2" 16 GA CR CHANNEL & FASTENERS CONTINUOUS BY OTHERS, NOT BY 2" FLOATING PERIMETER TRIM AT FULL PANEL 12 GA HANGER WIRE, BY OTHERS, TYP. 1/2" X 1-1/2" 16 GA CRC PRIMARY AT 48" O.C. MAX SPACING, BY OTHERS, TYP. CROSS CONNECTOR CLAMP AT ALL INTERSECTIONS OF S, TYP. FIELD MITER TRIM AT CORNER 1/2" X 1-1/2" 16 GA CRC PRIMARY AT 48" O.C. MAX SPACING, BY OTHERS, TYP " PANEL FLOATING PERIMETER TRIM FIELD CUT / MITER CROSS CONNECTOR CLAMP AT ALL INTERSECTIONS OF S, TYP. 2" 4-1/4" DETAIL 'B' 12 GA HANGER WIRE, BY OTHERS HOOK-ON CROSS CONNECTOR CLAMP FACTORY CUT PANEL 24" X 48" HOOK-ON PANEL STEEL FULL PANEL FLOATING TRIM PROJECT: HOOK-ON PRODUCT DRAWING NUMBER: HOOKON-A1.6
8 NOTE A: FIXTURE OR DIFFUSER MUST BE INDEPENTLY SUPPORTED IN ACCORDANCE WITH LOCAL BUILDING CODES AND MANUFACTURER'S INSTRUCTIONS NOTE B: USE - PANEL IN FIELD TO CREATE 24" CLEAR OPENING FOR FIXTURE OR DIFFUSER. CONTACT TO REQUEST CUSTOM FABRICATED - PANEL. ADDITIONAL BEYOND, FLIPPED, TYP. CROSS CONNECTOR CLAMP ADDITIONAL CR CHANNEL, TO SUPPORT FLIPPED 24" X 24" - DIFFUSER PANEL, SEE NOTE B. 1/2" x 1-1/2" 16 GA CR CHANNEL, SECTION 'A' 23" ADDITIONAL LENGTH 24" CLEAR OPENING ADDITIONAL, 23" LONG BETWEEN PLANKS HOOK-ON CROSS CONNECTOR CLAMP AT ALL INTERSECTIONS OF S 1/2" x 1-1/2" 16 GA CR CHANEL PRIMARY AT 48" O.C. MAX SPACING, TYPICAL. BY OTHERS, NOT BY BEYOND FULL 24" X 48" HOOK-ON PANEL, TYP. TYPICAL ISOMETRIC SCALE: NOT TO SCALE SECTION 'B' 24" CLEAR OPENING FLIP, SEE NOTE B. *HANGER WIRE OMITTED FOR CLARITY STEEL 2'-0" X 2'-0" FIXTURE OPENING PROJECT: HOOK-ON PRODUCT DRAWING NUMBER: HOOKON-A1.7
9 NOTE A: FIXTURE OR DIFFUSER MUST BE INDEPENTLY SUPPORTED IN ACCORDANCE WITH LOCAL BUILDING CODES AND MANUFACTURER'S INSTRUCTIONS NOTE B: USE - PANEL IN FIELD TO CREATE 48" CLEAR OPENING FOR FIXTURE OR DIFFUSER. CONTACT TO REQUEST CUSTOM FABRICATED - PANEL. FIELD CUT AND FLIPPED BEYOND, TYP. CROSS CONNECTOR CLAMP 1/2" x 1-1/2" 16 GA CR CHANNEL, 24" X 48" - DIFFUSER PANEL, SEE NOTE B. 23" FIELD CUT LENGTH 24" CLEAR OPENING FIELD CUT AND FLIP, 23" LONG BETWEEN PLANKS SECTION 'A' ADDITIONAL CR CHANNEL, TO SUPPORT FLIPPED HOOK-ON CROSS CONNECTOR CLAMP AT ALL INTERSECTIONS OF S 1/2" x 1-1/2" 16 GA CR CHANEL PRIMARY AT 48" O.C. MAX SPACING, TYPICAL. BY OTHERS, NOT BY BEYOND FULL 24" X 48" HOOK-ON PANEL, TYP. TYPICAL ISOMETRIC SCALE: NOT TO SCALE SECTION 'B' 48" CLEAR OPENING FLIP, SEE NOTE B. *HANGER WIRE OMITTED FOR CLARITY STEEL 2'-0" X 4'-0" FIXTURE OPENING PROJECT: HOOK-ON PRODUCT DRAWING NUMBER: HOOKON-A1.8
10 NOTE: FIXTURE OR DIFFUSER MUST BE INDEPENTLY SUPPORTED IN ACCORDANCE WITH LOCAL BUILDING CODES AND MANUFACTURER'S INSTRUCTIONS CROSS CONNECTOR CLAMP 1/2" x 1-1/2" 16 GA CR CHANNEL, PANEL C-Z BEYOND 6" MAX FROM PANEL EDGE 24" PANEL WIDTH 12" FIXTURE OPENING FIXTURE INDEPENTLY SUPPORTED. SEE NOTE FLANGED FIXTURE REQUIRED BEYOND SECTION 'A' FIELD CUT PANEL FOR FIXTURE WIDTH, 1/2" x 1-1/2" 16 GA CR CHANNEL PRIMARY AT 48" O.C. MAX SPACING, TYPICAL. FIXTURE INDEPENTLY SUPPORTED. SEE NOTE FULL 24" X 48" HOOK-ON PANEL, TYP. TYPICAL ISOMETRIC SCALE: NOT TO SCALE FLANGED FIXTURE REQUIRED SECTION 'B' 36" FIXTURE OPENING FIELD CUT PANEL FOR FIXTURE LENGTH, *HANGER WIRE OMITTED FOR CLARITY not be submi tted f or STEEL FIELD CUT PANEL OPENING PROJECT: HOOK-ON PRODUCT DRAWING NUMBER: HOOKON-A1.9
11 SPLAYED 12 GA HANGER WIRE, BY OTHERS, TYP. COMPRESSION STRUT, BY OTHERS /2" x 1-1/2" 16 GA CR CHANNEL, LATERAL BRACING: BRACE WITH HANGER WIRES AND STRUTS PER ASTM E-580 AND IN ACCORDANCE WITH LOCAL CODE REQUIREMENTS. (4) #12 GAUGE WIRES SPLAYED 90 FROM EACH OTHER AT ANGLE NOT EXCEEDING 45 FROM PLANE OF CEILING. A STRUT FASTENED TO MAIN RUNNER SHALL BE EXTED TO AND FASTENED TO STRUCTURE ABOVE. SPLAYED WIRE AND STRUT BRACING TO BE PLACED NOT MORE THAN 12 FEET ON CENTER IN EACH DIRECTION, WITH THE FIRST POINT WITHIN 6 FEET FROM EACH WALL. STEEL SEISMIC PROJECT: HOOK-ON PRODUCT DRAWING NUMBER: HOOKON-A1.10
DETAIL 'A' INTERIOR INSTALLATION. OVERALL ISOMETRIC VIEW (unless noted otherwise) 300C CARRIER 12 GA HANGER WIRE, BY OTHERS, NOT BY HUNTER DOUGLAS
3 " NOM. 316 G, ER V RO N HA. TYP SEE DETAILS A1.7 THROUGH A1.10 FOR FIXTURE OPENING RECOMMENDATIONS IE ARR XC 12 GA HANGER WIRE, BY OTHERS, NOT BY HUNTER DOUGLAS SEE DETAIL A1.2 A "M 1'-0 300C PANEL SPLICE
12 GA HANGER WIRE, BY OTHERS, NOT BY HUNTER DOUGLAS SEE DETAIL A1.1 MAIN RUNNER SPLICE. SPECIFICATIONS (unless noted otherwise)
12 GA HANGER WIRE, BY OTHERS, NOT BY HUNTER DOUGLAS SEE DETAIL A1.1 4' OPEN CELL RUNNER SEE DETAIL A1.7 FOR INFILL PANEL FIXTURE OPENING RECOMMENDATIONS CROSS RUNNER FIELD CUT AT PERIMETER TYPICAL SYSTEM
MIDDLE SECTION REPRESENTS "BLADE SIZE" (EXAMPLE: 24 = 24/32" [3/4"] 48 = 48/32" [1 1/2"]) REPRESENTS NUMBER OF BLADES PER 12" WIDE PANEL WG WB
![MIDDLE SECTION REPRESENTS BLADE SIZE (EXAMPLE: 24 = 24/32 [3/4] 48 = 48/32 [1 1/2]) REPRESENTS NUMBER OF BLADES PER 12 WIDE PANEL WG WB](/thumbs/96/128948679.jpg "MIDDLE SECTION REPRESENTS BLADE SIZE (EXAMPLE: 24 = 24/32 [3/4] 48 = 48/32 [1 1/2]) REPRESENTS NUMBER OF BLADES PER 12 WIDE PANEL WG WB")
HOW TO READ PRODUCT "SKU" : FIRST TWO LETTERS REPRESENT "PRODUCT TYPE" MIDDLE SECTION REPRESENTS "BLADE SIZE" (EXAMPLE: 24 = 24/32" [3/4"] 48 = 48/32" [1 1/2"]) REPRESENTS NUMBER OF BLADES PER 12" WIDE
PANEL SPLICE SEE DETAIL A1.3 FLOATING TRIM SEE DETAIL A1.7 TRIM NOT SHOWN FOR CLARITY
V-7 CAIE 4" MODULE OPTIONAL FLUSH CLOSUE OPTIONAL ECESSED CLOSUE 21 32 " 3 11 32 " 1 1 8 " 5 8 " 1 29 32 " 12 GA HANGE WIE, BY OTHES, NOT BY HUNTE DOUGLAS SEE DETAIL A1.2 TYPICAL SECTION SUSPENSION EQUIEMENTS
SafeLite Installation Steps For a 2 x 2 Light Fixture
SafeLite Installation Steps For a 2 x 2 Light Fixture SafeLite Installation Instructions Fluorescent Fixtures (Refer to Diagrams) 1) For existing ceiling applications, remove ceiling tile from both sides
SECTION METAL LOCKERS. A. ADAAG - Americans with Disabilities Act, Accessibility Guidelines.
Section 10_51_13_MetalLockerPenco-ProTough_8-19-09 PART 1 GENERAL SECTION 10 51 13 METAL LOCKERS 1.01 SECTION INCLUDES A. Heavy Duty Welded Tubular Frame Lockers. B. Locker benches. 1.02 REFERENCES A.
R & S Manufacturing and Sales Company
R & S Manufacturing and Sales Company KNOCKED DOWN RIDGE VENTS RV9-12 ASSEMBLY INSTRUCTIONS April 2013 PARTS LIST End Caps (2 per vent) Wind Bands (2 per vent) Skirt Flashings (2 per vent) Skirt Cross
CUSTOM FLOW ARCHITECTURAL SLOT DIFFUSER
ARCHITECTURAL SLOT DIFFUSER Custom Flow (CF) slot diffusers are uniquely designed for curving and long continuous installations. The CF offers a large range of airflow flexibility with one or two slot
High Performance Linear System Recessed
Extruded aluminum linear corners complete an area that contains corners or straight turns. Tove corners have mitered cuts that are available in a standard, or custom angle. The Tove Corner is suitable
SECTION METAL LOCKERS. A. ADAAG Americans with Disabilities Act, Accessibility Guidelines.
SECTION 10 51 13 METAL LOCKERS PART 1 GENERAL 1.01 SECTION INCLUDES A. Heavy Duty Welded Gear Lockers. B. Locker benches. 1.02 REFERENCES A. ADAAG Americans with Disabilities Act, Accessibility Guidelines.
Wall/Slot -II 85N Recessed Perimeter
Type: Project: Wall/Slot -II 85N Recessed Perimeter Specifications 10 1/2 (267 ± 19) 9" (229) baffle shown in flush F/position 3 5/8" (92) FIXTURE SUPPORT RAIL. Extruded white aluminum, wall-mounted rail
GRAVITY VENTILATORS SIZING
GRAVITY VENTILATORS SIZING RCXII (sizes 6-20) RCXII (sizes 24-36) RCXII-SF BGH RLX Sizing The tables shown offer quick selections at common static pressure points. Selection choices vary widely due to
2006 Saturn Ion ACCESSORIES & EQUIPMENT Doors - Ion
POWER DOOR LOCK SWITCH REPLACEMENT Removal Procedure Fig. 28: View Of Power Door Lock Switch 1. Using a flat-bladed tool, pry the switch from the door trim panel enough to expose the locking tabs. 2. Press
CLEANROOM PRODUCTS FLUSH HEPA GRID WITH INTEGRAL LIGHTING PLENUM MODULES CUSTOM AIR HANDLERS PLENUM MODULES FAN POWERED PLENUM MODULES
TOP LOAD FLUSH GRID BOTTOM LOAD FLUSH GRID FLUSH HEPA GRID WITH INTEGRAL LIGHTING TOP LOAD FLUSH HEPA CEILING GRID BOTTOM LOAD FLUSH HEP CEILING GRID 34 & 316 BOTTOM LOAD FLUSH PLENUM MODULES PLENUM MODULES
Rigid Rak. Closet Accessories & Wardrobe Furniture /DAT BuyLine 3206
Rigid Rak Closet Accessories & Wardrobe Furniture 10 57 13/DAT BuyLine 3206 Tubular Steel Wall Racks 1-1/8 square steel tubing wall mount brackets with mitered angle and hidden weld. 3/4 round tubular
Estimated Cable Fill Width in (mm) in 2 mm 2.30 OD. Cable Fill Area
ONTRAC WIRE MESH CABLE TRAY SYSTEM OnTrac Wire Mesh Cable Tray System CPI s OnTrac Wire Mesh Cable Tray System is an excellent solution for indoor cable pathway applications to create point-to-point pathways
Installation instructions for the LUX LED-GYM WAVE
Installation instructions for the LUX LED-GYM WAVE LUX WAVE 5 BAR LUX dynamics luminaires install in ¼ the time. It s a bold statement, but it s the truth. We do all the work for you. Simply snap on the
ISO 9001:2008
DOOR Dutch, Standard Duty, Individual Dog Model Features 1 FREEMAN MARINE Dutch doors perform like a single panel door when regular access is needed, yet the top half can be operated separately from the
"CLARITY WALL" VIF " 1 1 8" SECTION 1 2 " 3 8 " "CLARITY" SLIDING DOOR with FIXED GLASS PANEL BLOCKING & SUPPORT AS NEEDED SCHEDULED CEILING
VIF BLOCKING & SUPPORT AS NEEDED 2 13 16" SCHEDULED CEILING FOAM GASKET 1/2" x 1/8" CORRIDOR SIDE 3 8 " OFFICE SIDE UPPER TRACK UPPER TRACK VALANCE DRY FIT CLEAR GASKET FIXED PANEL SLIDING DOOR 1 1 8"
WORK STATION BRIDGE CRANES
FREE STANDING WORK STATION BRIDGE CRANES CAPACITIES: SPANS: ENCLOSED TRACKS: PRODUCTIVITY: Up to 4000 lbs Up to 30' Steel, Aluminum & Stainless Steel Average 28% Increase A Class Above... In Productivity.
600 SERIES STANDARD DUTY STRAIGHT TRACK INSTALLATION INSTRUCTIONS
600 SERIES STANDARD DUTY STRAIGHT TRACK INSTALLATION INSTRUCTIONS PLEASE READ INSTRUCTIONS THOROUGHLY BEFORE BEGINNING. A. BI-PARTING TRAVEL 1. Before raising track into position, determine location of
CEILING MOUNTED WORK STATION STEEL BRIDGE CRANE
SECTION 14636 CEILING MOUNTED WORK STATION STEEL BRIDGE CRANE ***** Gorbel, Inc. manufactures a broad range of material handling cranes including monorail, bridge, gantry, and jib cranes. Numerous work
WILSONSTAK CANTILEVER SHELVING DETAIL SHEETS
WILSONSTAK CANTILEVER SHELVING DETAIL SHEETS - 1 - INDEX (in alphabetical order) Backs, Closed... 49 Backstop, Adjustable Shelf... 39 Book Supports - Findable, Hook-on, Wire... 37 Sliding... 38 Bracket
CEILING MOUNTED WORK STATION BRIDGE CRANES & MONORAILS
CEILING MOUNTED WORK STATION BRIDGE CRANES & MONORAILS CAPACITIES: SPANS: ENCLOSED TRACKS: PRODUCTIVITY: Up to lbs Up to 0', Aluminum & Stainless Average 28% increase A Class Above... In Productivity.
Chicago Metallic 200 Snap Grid 15/16
Part of The ROCKWOOL Group Chicago Metallic 200 Snap Grid 15/16 coustical ceiling suspension system Ideal for: Retail, classrooms, general interiors. Performance Properties: -Intermediate and heavy duty
GP Lam LVL. Grade Thickness Depth , , , , , 149, 169, 189, 249 (209and 229 by special order) 2.
GP Lam LVL Grade Thickness Depth 2.0E 1 3 49, 3 1 29 7 1 49, 9 1 49, 9 1 29, 11 1 49, 11 7 89, 149, 169, 189, 249 (209and 229 by special order) 1.5E 1 3 49 7 1 49, 9 1 49, 9 1 29, 11 1 49, 11 7 89, 149,
GP Lam LVL. Grade Thickness Depth , 9 1 4, 9 1 2, , , 14, 16, 18, 24 (20 and 22 by special order) 2.
GP Lam LVL GP Lam LVL Introduction.....................32 Bearing Details...................34 Handling and Installation..........35 Floor Beams.....................35 Window, Patio Door and Garage Door
TG/RB/2M/Web Rev.12/1/16. Pipe Hangers & Devices
TG/RB/2M/Web Rev.12/1/16 Pipe Hangers & Devices Pipe Welcome Hangers to PHD & Devices Manufacturing PHD Manufacturing, Inc. was founded in 1972 by a group of industry veterans with strong management, financial,
INSTALLATION INSTRUCTION W Track Recessed 120V Flangeless
W Track Recessed 120V Flangeless WT4-RTL, WT8-RTL, WT12-RTL SAFETY INSTRUCTION Read all of these instructions before installing the track system. Turn off power at main switch before installing or modifying
SHOW YOUR PROFILE WITH OCTANORM ALUMINIUM PROFILES Overview of OCTANORM's extensive collection of extrusions. Product is sorted by function and form.
SHOW YOUR PROFILE WITH OCTANORM ALUMINIUM PROFILES Overview of OCTANORM's extensive collection of extrusions. Product is sorted by function and form. exhibition systems interior design systems presentation
A. This Section includes the following types of sectional overhead doors:
SECTION 08361 - SECTIONAL OVERHEAD DOORS PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 1 Specification
Chicago Metallic /16
Part of The ROCKWOOL Group Chicago Metallic 1200 15/16 coustical ceiling suspension system Ideal for: Retail, classrooms, general interiors. Performance Properties: -coustical grid system comes in intermediate
Series 3 & 4 Stainless Steel - Accessories
- Accessories Splice Plates Standard 8-hole pattern for all steel splice plates. One pair including hardware provided with straight section. (Expansion splice quantity subtracted) Boxed in pairs with hardware.
HORD INSTALLATION & SERVICE MANUAL. Hospital Operating Room Diffusers INSTALLATION & SERVICE MANUAL. Date: 06 / 12 Reference # : E-10 1
HORD Hospital Operating Room Diffusers Date: 06 / 12 Reference # : E-10 1 2 Table of Contents Prior to Installation... 4 Ductwork Layout... 4 Installation of HORD Air Curtain System...5-9 T-Bar Ceiling...5-6
REVISION DESCRIPTION:
REVISION DESCRIPTION: 1) Page: 12-03 REV 1: Step 1: and Figure 1: Final-Drill s.b. Match-Drill. Step 4: Updated flox mixture description to match later description (removed "peanut butter-like" description).
Industrial and Stainless Steel Track and Hardware Pg 53. Straight Sliding Industrial wood. Door Hardware metal
Contents Introduction to P C Henderson Pg 2 Commercial Straight Sliding Systems Pg 3 Husky Husky Pacer Pacer Flexirol Commercial Folding Systems Pg 4 Husky Pacer Centerfold Pacer Endfold Pacer Endfold
HSpecialties Inc. TABLE OF CONTENTS
TABLE OF CONTENTS Introduction... Curtain Track Selection Guide...2 Ordering COMPLETE Tracks...3 00 Series Standard-Duty Straight Track...4 200 Series Black Medium-Duty Straight Track...8 300 Series Standard-Duty
General Information SECTION DIRECTORY
SECTION DIRECTORY General Information Product Summary... V-AW-2 Product Selection Guide... V-AW-3 Size and Performance Data... V-AW-3 Features and Options... V-AW-3 Sound Transmission Class and Outdoor-Indoor
Dearborn Overhead Crane
A Class Above... In Productivity. In Safety. In Ease of Positioning and Movement. In Ease of Installation. In Designs, Capacities, and Spans. It s no wonder more and more businesses like yours are choosing
Ceiling swirl diffusers
X X testregistrierung Ceiling swirl diffusers Type Horizontal swirling air discharge Adjustable blades Protective cage For high rooms, with adjustable air control blades Circular ceiling swirl diffusers,
SECTION METAL LOCKERS
SECTION 10 5113 METAL LOCKERS This section includes editing notes to assist the user in editing the section to suit project requirements. These notes are included as hidden text, and can be revealed or
Section 3. Custom. Recessed
Section 3 Custom Recessed BX Connector 13.375" 11.375" Hanging Cable Typ (By others) Threaded Rod Typ (By others) 23.375" OAL Fixture Lamp Housing PAR30 Lamp Holder Ballast Compartment 6.781" 45 " 12.000"
CPG Series. Submittal Data Form. 3- to 6-Ton Self-Contained. Packaged Gas/Electric. with R-410A
CPG Series 3- to 6-Ton Self-Contained Submittal Data Form Purchaser Order No. Engineer Unit No. Model No. Unit Designation Performance Data Certified By: Packaged Gas/Electric with R-410A Standard Features
Specialties Inc. DISCLAIMER TABLE OF CONTENTS
TABLE OF CONTENTS Curtain Track Selection Guide...2 Ordering COMPLETE Tracks...3 Recommended Track Hanger Spacing...4 100 Series Standard-Duty Straight Track...6 200 Series Black Medium-Duty Straight Track...10
Tove. High Performance Linear System Perimeter
The Tove family of luminaires offers unmatched performance, design flexibility, simplified installation and superior quality. The family of luminaires includes pendants, surface mounted, wall mounted,
Armstrong Trulok Suspension System Accessories (56GA)
Armstrong Trulok Suspension System Accessories (56GA) A comprehensive range of accessories which provide a high standard of both installation and finished appearance to Armstrong suspension systems. Images:
Track Accessories. Single Circuit Track. L Connector T Connector X Connector. Mini Connector Floating Canopy End Feed Kit.
Single Circuit Single Circuit Track Live End Connector Flexible Connector Straight Connector Track supplied with dead end and mounting hardware Live end connector used for direct wiring Flexible connector
A B C D E F. b.tools Required (supplied by others) 3/16" Drill Bit 3/8" Wrench Phillips Head Screwdriver
Page 1 of 13 5E.1 Parts List a. Below Deck Automatic Retractable Security Cover Kit (1) Tube End Bearing Plate (A) (1) Rope Reel with Motor Attached (B) (1) Rope Reel Cover (C) (1) Cover Drum (1) Cover
Submittal CBAM Active Modular Chilled Beam 4-Way Discharge Horizontal Coil
Submittal CBAM Active Modular Chilled Beam 4-Way Discharge Horizontal Coil CBAM-1.0 09-16-16 Top Inlet Configurations INTEGRATED 1/4" PRESSURE PORT FOR BALANCING/COMMISSIONING ACCESSABLE FROM ROOM SIDE
POWER RAIL P4 ASSEMBLY INSTRUCTIONS. step-by-step assembly and installation. Version 1, Rev A PCN
TM POWER RAIL P4 ASSEMBLY INSTRUCTIONS step-by-step assembly and installation Version 1, Rev A PCN 080814-1 TM Power Rail P4 WARNING: Follow the procedures and precautions in these instructions carefully.
Mirror Kits and Assemblies
Mirror Kits and Assemblies Stylmark offers sturdy, high-quality fitting room systems designed to fit together easily and quickly allowing for rapid field installation. With the flexibility of our post-andpanel
ZODIAC 601 XL. Trim the outboard corner of the front flange of the center spar 6W4-1. Corner should not touch the side of the cabin floor skin 6B10-1.
Trim the outboard corner of the front flange of the center spar 6W4-1. Corner should not touch the side of the cabin floor skin 6B10-1. Tape the side skins to the cabin floor skin (area in front of the
300 SERIES STANDARD DUTY CURVED TRACK
300 SERIES STANDARD DUTY CURVED TRACK COMPLETE TRACK MODEL NUMBERS 301A 301W 316A 316W 328A 328W 300B SERIES BLACK CURVED TRACK COMPLETE TRACK MODEL NUMBERS 301AB 301WB 316AB 316WB 328AB 328WB SINGLE CARRIER
4DS 4.5 Downlight Square
CATALOG #: 4-1/2 5-1/2 TYPE: PROJECT: NEW CONSTRUCTION AND REMODEL FEATURES Tunable white from 2700K to 5000K CCT, minimum 80 CRI 4 inch aperture is unobtrusive in small scale spaces Square shape accentuates
FOR YOUR CORDED APPLICATION AND CAN BE USED WITH WOOD POLE FASCIA
FOR YOUR CORDED APPLICATION AND CAN BE USED WITH WOOD POLE FASCIA CCS - Contract Cord System Aluminum extrusion, white, powder coated, lubricated, wall and ceiling mount with separate channels for use
CUSTOM VENTILATED AWNINGS
CUSTOM VENTILATED AWNINGS FASHION AWNINGS offer you a variety of styles. They are priced differently, they are designed differently both from appearance and from the purpose for which they are to be used.
8' - 10' Dinghy NOTE: Deck Camber is actually 5 degrees downwards on Beatrix. This drawing shows it as horizontal.
Threefold purchase. Place two triple-sheave blocks 3 feet apart, with the hooks or straps facing outboard, positioning the blocks so one is face down and the other is cheek down. Start reeving in the center
F-1202D-L PANEL ATTACH STRIP F L UPPER FWD FUSELAGE SKIN RIB F CABIN EGRESS HANDLE F-1240B COVER PLATE
SECTION 29iS/U: F-1202D-L PANEL ATTACH STRIP F-01240-1 UPPER FORWARD FUSELAGE SKIN (SHOWN TRANSPARENT) VAN'S AIRCRAFT, INC. FWD UPPER FUSELAGE F-00078 CABIN EGRESS HANDLE F-00077-L UPPER FWD FUSELAGE SKIN
Bag 1. Bag 1. Center Pivot. Center Pivot
8 00734 01901 5 Center Pivot Bag 1 3374 - Center Pivot Socket 4019 - Alum Pivot ball 3254-2-56 Button Head *Note - Sometimes it is helpful to slightly over-tighten the top clamp screws, then work the ball
ISO 9001:2008
DOOR Dutch, Heavy Duty, Individual Dog Model Features 1 FREEMAN MARINE Dutch doors perform like a single panel door when regular access is needed, yet the top half can be operated separately from the bottom
6DS 6 Downlight Square
CATALOG #: L7 - L13: 5-7/8 L21: 7-3/8 6 TYPE: PROJECT: NEW CONSTRUCTION AND REMODEL FEATURES Dim to warm from 1800K to 3000K CCT, minimum 95 CRI Beam angles ranging from 25º narrow to 65º wide for tailored
Running Magnet 2.0 Recessed High-tech LED lighting system for interior architecture
Description Fun with magnets and light. Simultaneously graphic and subtle, the Running Magnet is flexible, precise, and as creative as you. It is track lighting redesigned and elegantly refined. Light
HALO H7T. 6" RECESSED DOWNLIGHTING Incandescent
6" RECESSED DOWNLIGHTING Incandescent 6" Aperture Non-IC Ceiling 120V Line Voltage RECESSED DOWNLIGHTING Thermally Protected Housing Insulation must be kept 3" from all sides of the housing For use with
OWAtecta. OWA metal ceilings. OWAtecta Metal ceilings
OWAtecta OWA metal ceilings OWAtecta Metal ceilings 3 OWAtecta Metal ceilings Contents Inhalt Perforations steel... 4 Perforations aluminium... Systems System S b OWAline... 7 System S 6M Tube Ceiling....
4DS 4.5 Downlight Square
CATALOG #: - : 5 : 6-1/2 4-1/2 5-1/2 TYPE: PROJECT: NEW CONSTRUCTION AND REMODEL FEATURES Dim to warm from 1800K to 3000K CCT, minimum 95 CRI 4 inch aperture is unobtrusive in small scale spaces Square
DIAMOND DOOR PRODUCTS TECHNICAL DETAILS MARCH 2010
DIAMOND DOOR PRODUCTS TECHNICAL DETAILS 1. Table of Contents 2. Overall Specifications 3. Warranty 4. Door Overall Dimensions Standard locations 5. Door Construction 6. Total Preassembled Dimensions 7.
DTC Series. Submittal Data Form 3- TO 5-TON SINGLE-PHASE PACKAGED AIR CONDITIONER
DTC Series Submittal Data Form 3- TO 5-TON SINGLE-PHASE PACKAGED AIR CONDITIONER Job Name Purchaser Order No. Engineer Unit No. Model No. Unit Designation Performance Data Certified By: Cabinet Features
LIFT CORP. CUSTOMER SERVICE: (562) (800) FAX: (888) Slauson Ave. Santa Fe Springs, CA TECHNICAL SERVICE: (800)
M-90-1 REV. B JAN. 2000 INSTALLATION MANUAL RC-2B RC-3B RC-4B RC-5B RC-6B RC-6K 11921 Slauson Avenue. Santa Fe Springs, CA. 90670 (800) 227-4116 C MAXON Lift Corp. 1999 LIFT CORP. CUSTOMER SERVICE: (562)
4DR 4.5 Downlight Round
CATALOG #: - : 5-3/4 : 6-1/2 ø4-1/2 ø5-1/2 TYPE: PROJECT: NEW CONSTRUCTION AND REMODEL FEATURES Williams TrimLock reflector retention system eliminates trim sag Tunable white from 2700K to 5000K CCT, minimum
KAWNEER 1686 EL CONCEALED EXIT DEVICE
FEBRUARY, 2012 1 ROD AND CENTER CASE ASSEMBLY: 1) For inactive doors or doors without exterior cylinder, or doors without the need for exterior cylinder dogging, the removal of the cylinder dogging pawl
PC-125x Counter-Balanced Backdraft Damper
PC-15x Counter-Balanced Backdraft Damper Product Bulletin Code No. LIT-101180 Issued April 7, 015 Refer to the QuickLIT Web site for the most up-to-date version of this document. Since 1885, Johnson Controls
Type: Quantity: Project:
SLOTLIGHT LED II 2-1/2" Recessed Straight Applications: SLOTLIGHT LED II provides an elegant, uniform line of light with consistent color that blends seamlessly into the surrounding architecture and can
SIDE DETAIL ELEVATION DETAIL RAILING OPTIONS
RAILING OPTIONS ) Ø 2" or Ø 2" SS* 2) Ø 2" WOOD CHERRY RED OAK WHITE OAK MAPLE 3" 3) Ø 2" LED irail M0 3'6" 3 4 " GAP TYP. CIRCA POST ) STAINLESS STEEL* (STANDARD) 2) PVD COATING WIRE MESH M 3'0" PERFORATED
V3 Series Awning Windows (2011 to Present)
What s in This Section Standard and Custom Windows...................................... Page 3 Parts Illustration........................................................... 3 Options- Exterior..................................................
DOOR French, Heavy Duty, Individual Dog Model 1620 Features 1
DOOR French, Heavy Duty, Individual Dog Model Features 1 When wider access is needed, FREEMAN MARINE French doors perform like two single panel doors that seal to each other. The same high quality tooling
3.25, 4.5, 7.5 Tabletop Conveyor Specifications
3.25, 4.5, 7.5 Tabletop Conveyor Specifications Complete Conveyor Systems and Equipment Conveyor Specifications Frame Material Thickness Material Finish Design 12 GA Mild steel Stardust Silver" powder
Choice of mud-in flange or overlap trims and cover profiles for custom appearances. Two-channel design for multiple zone controls
by Recessed Power Track Housing is a revolutionary all-in-one slot power delivery system. Express your creativity by dynamically repositioning every light fixture to personalize your lighting design. FEATURES
1) Page: REV 5: Changed depiction to show added hardware and T-01220
REVISION DESCRIPTION: 1) Page: 37-01 REV 5: Changed depiction to show added hardware and T-01220 Page: 37-02 REV 4: Added Figure 3 depicting Separating the T-01220 Doublers. Figure 4 was Figure 3. Added
EXTERIOR BASE MOUNT INSTALLATION (FIG. 2)
EXTERIOR BASE MOUNT INSTALLATION (FIG. 2) IMPORTANT! The installer is responsible for determining the most appropriate fastener to secure the base mount to the roof and weatherproofing all holes with sealant.
RECESSED TRACK (120V) SPECIFICATIONS
RECESSED TRACK (120V) SPECIFICATIONS GENERAL Recessed track shall be approved by the NEC for flush-mounting into ceiling or any flat surface. Recessed Track shall allow fixtures to be easily focused, switched,
Edition 1 August Overhead Rail System. Models ZRAT, ZRA1, ZRA2 & ZRS2/3
65985 Edition August 007 Overhead Rail System Models ZRAT, ZRA, ZRA & ZRS/ Table of Contents ZRAT Aluminum Rail & Components... Engineering Data for ZRAT Aluminum Rail... How to Order ZRAT Aluminum Runway
Standard Installation Fire Damper Models: 319, 319(SS), D39
Standard Installation Fire Damper Models: 319, 319(SS), D39 Page 1 or 6 APPLICATION This fi re damper is intended to restrict the passage of fl ame. The standard installation requires that the damper is
FIVE BOW FB Suspended, Surface LED
FIVE BOW FB LED Find additional images and information at alwusa.com/fb 1. BASE MODEL FBD 1.75" suspended, direct FBI 1.75" suspended, indirect FBSMB 1.75" suspended, surface-mount Page 2 of 6 Type: 2.
argco.com
800-854-1015 argco.com STRUT SUPORT SYSTEM STRUT SUPPORT CHANNEL US Strut Support Channel Quick, strong attachment of single or multiple pipes horizontally or vertically Unlimited applications - range
SLIDING DOOR SYSTEM_ S42 TECHNICAL BOOK. System description Accessories
SLIDING DOOR SYSTEM_ S42 TECHNICAL BOOK System description Accessories 1 SLIDING DOOR SYSTEM_ S42 1.0_ System description, Sliding panel_ page 03 2.0_ Profiles_ page 04 3.0_ System description, Fixed panels_
INSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS Commercial Supplemental Instructions (For use with Commercial & Industrial Sectional Doors Installation & Maintenance Manual) Things to Know Before You Begin This is a supplement
Avenue B. Narrow 3" slot LED with frosted satin lens. Shielding options include corrugated or solid regressed trim or flush lens.
LED corrugated regress trim solid regress trim flush lens DIMENSIONAL DATA FEATURES Narrow 3" slot LED with frosted satin lens. Shielding options include corrugated or solid regressed trim or flush lens.
Initiate WARNING. Illustration 1. Panel Connection Guidelines:
Failure to install product as instructed, use of hardware other than that which is provided with the product, or failure to comply with all instructions can result in product failure and/or personal injury
Components & Methods of Attachment Series 99 Fixed & Moving Rail Tracks
Components & Methods of Attachment Series 99 Fixed & Moving Rail Tracks 9946 9943 9956 Internal Joining Fixed Track 9952 Ceiling Cover 78mm Diameter 9950 Swivel Hanger Attachment 9951P Two Screw Attachment
LAMINAR FLOW DIFFUSER Model DLAB
Laminar & Radial Flow Diffuser LAMINAR FLOW DIFFUSER Model DLAB Application Laminar Flow diffusers are used to deliver air to surface directly underneath in a non-aspirating air pattern, with the minimum
Inde-Pendants Family. 32L Cylinder with Ring Chicago Plenum Ceiling Types. Document No
Inde-Pendants Family 32L with Ring Chicago Plenum Ceiling Types Installation instructions for: 32L-CRxx-P-ID-CCEA 32L-CRxx-P-D-CCEA Document No. 32L Inde-Pendants: with Ring (Plaster Trim, Grid and Drywall
MOUNTING SYSTEMS SPECIFICATIONS
MOUNTING SYSTEMS SPECIFICATIONS GENERAL Mounting Systems shall allow Track Systems to be fastened to or from various surfaces in a wide range of safe and approved methods. Mounting Systems shall have a
6DR 6 Downlight Round
- : 6-5/8 : 7-3/8 CATALOG #: ø6 ø7 TYPE: PROJECT: NEW CONSTRUCTION AND REMODEL FEATURES Innovative TrimLock reflector retention system ensures trim remains flush with ceiling plane Dim to warm from 1800K
TABLE OF CONTENTS AMERICAN NATIONAL STANDARDS INSTITUTE. Series 2232 Fiberglass Stepladder 3. Series 2032 Fiberglass Stepladder 4
PRODUCT CATALOG TABLE OF CONTENTS Product Page AMERICAN NATIONAL STANDARDS INSTITUTE Series 2232 Fiberglass Stepladder 3 Series 2032 Fiberglass Stepladder 4 Series 2114 Fiberglass Stepladder 4 PRODUCT
L10 - L40: 6-5/8 L50 - L60: 7-3/ K K K K. EM/10W 10-watt emergency battery [4] TrimLock.
![L10 - L40: 6-5/8 L50 - L60: 7-3/ K K K K. EM/10W 10-watt emergency battery [4] TrimLock.](/thumbs/95/124178661.jpg "L10 - L40: 6-5/8 L50 - L60: 7-3/ K K K K. EM/10W 10-watt emergency battery [4] TrimLock.")
CATALOG #: - : 6-5/8 - : 7-3/8 TYPE: ø6 ø7 PROJECT: FEATURES Williams TrimLock reflector retention system eliminates trim sag Beam angles ranging from 1 narrow to 65º wide for tailored performance Open
MANUAL INSTALLATION. Active Chilled Beam Linear. ACBL Series. v101 Issue Date: 04/10/ Price Industries Limited. All rights reserved.
MANUAL INSTALLATION Active Chilled Beam Linear ACBL Series v11 Issue Date: 4/1/18 218 Price Industries Limited. All rights reserved. TABLE OF CONTENTS Product Overview Before You Start...1 Maintenance...1
Ship To. Item Code Description Qu... Price Each Amount 3H Rawhide Trailer 2010 Serial #1D9CS2423AP363770
# Safetack Rawhide 3H 3H Rawhide Trailer 2010 Serial #1D9CS2423AP36 Structural: NOTE: Black Exterior **24 box length, 31 6 overall **Height 7'; Interior Width 81 **2x8 pressure treated pine flooring front
Aluminum Box Culverts
Steel and Aluminum s The Solution for Small Bridge Replacement: s Contech s are a practical and costefficient solution for small bridge replacement. They have a lower installed cost because they are faster
A B C D E F. Tools Required (supplied by others)
Page 1 of 17 Parts List Below Deck Automatic Retractable Security Cover Kit (1) Tube End Bearing Plate (A) (1) Rope Reel and Cover Drum Motor Assembly (B) (1) Cover Drum (1) Pulley Support Channel (2)
STEP LADDER ALUMINIUM
STEP LADDER ALUMINIUM STEP LADDER ALUMINIUM with or without HANDLE Steel Step Ladder Light Grey 6-8 steps W D H h 3-6 steps Features: Light weight Easy to use 3-5 steps 3-6 steps 2-3 steps Certificate