Estimated Cable Fill Width in (mm) in 2 mm 2.30 OD. Cable Fill Area

Transcription

1 ONTRAC WIRE MESH CABLE TRAY SYSTEM OnTrac Wire Mesh Cable Tray System CPI s OnTrac Wire Mesh Cable Tray System is an excellent solution for indoor cable pathway applications to create point-to-point pathways for network cabling in data centers, network equipment rooms and office spaces. In addition to standard tray, we now offer OnTrac Shaped Tray as an option when supporting high performance and high density cabling. OnTrac Wire Mesh Cable Tray is available in two styles: Shaped Tray and Standard Tray. Shaped Tray is the best choice for high density cabling applications because it features flattened cross wires to provide a larger surface for supporting cables. Shaped Tray features 400% larger contact surface, up to 63% reduction in cabling strain. Select tray size based on cable fill ( requirements considering the space available for trays in the location. Some sites will use multiple sizes. When stacked, leave at least 12 (300 mm) between trays. Trays are sold in standard 10 L (3 m) lengths. Note that the trays are available in different finishes, but both tray styles use the same splices, supports and accessories. *Pre-Galvanized Shaped Tray Standard Tray Nominal Dimensions Height Cable Fill Area Estimated Cable Fill in 2 mm 2.30 OD Cable Max. Load 6 L (1.8 m) Span Splices (50) 4 (100) (5.0) (50) 6 (150) (5.4) (50) 8 (200) (6.4) (50) 12 (300) (7.7) (50) 16 (400) (9.1) (50) 18 (450) (9.5) (50) 20 (500) (11.8) (50) 24 (600) (11.8) (100) 4 (100) (6.4) (100) 6 (150) (7.3) (100) 8 (200) (8.7) (100) 12 (300) (8.5) (100) 16 (400) (10.9) (100) 18 (450) (11.3) (100) 20 (500) (12.2) (100) 24 (600) (13.6) (150) 8 (200) (10.0) (150) 12 (300) (11.3) (150) 16 (400) (12.7) (150) 18 (450) (13.2) (150) 20 (500) (14.1) (150) 24 (600) (15.4) Notes: 1) Above part numbers have a pre-galvanized finish and are UL Classified in U.S. only except for 2 H x 4 W (50 mm x 100 mm) Standard Tray (P/N X04), which is not UL Classified regardless of finish. 2) Above products also available in Black (-7XX) and Glacier White (-EXX) finishes. Only Standard Tray is available in Zinc electroplate finish (-5XX). Black, Glacier White and Zinc finishes are UL Classified in the U.S. and Canada. Zinc electroplate finish has longer lead time. 3) Max. Load is reduced by 20% (multiply by 0.8) when tray is spliced using the Spring Splice Kit (P/N or ). Spring Splice Kit cannot be used with Shaped Tray. lb/ft kg/m Min. Qty. 6-3 CPI:

2 ONTRAC WIRE MESH CABLE TRAY ACCESSORIES XX XX L Support Bracket Kit Use to support a wire mesh cable tray pathway along a wall or under a floor, Installation requires two 3/8 lag bolts and two flat washers for plywood backer boards or two 1/4 hex cap bolts, two flat washers and two appropriate anchors for concrete walls (order separately). Use the 16 W (400 mm) or smaller version to support cable tray from an access floor pedestal. Attach to the pedestal with a single Pedestal Clamp Bracket Kit (P/N X01); floor height must be at least 12 (300 mm). Attach tray to the L Support Bracket with two splice washers from the Splice Washer & Bolt Kit (P/N X01), or use the fold-over tab at the end of the bracket to secure the tray. Can be used to support multiple trays of varying widths; the combined width of multiple trays must not exceed the width of the tray stated in the order table below. Manufactured from steel; length varies, sold individually. Trapeze Support Bracket Use to support wire mesh cable tray from the ceiling using a pair of threaded rods. Installation requires a pair of 1/2, 3/8 or 1/4 threaded rods, four hex nuts, two (1/2 ) or four (3/8, 1/4 ) flat washers, two split lock washers and two appropriate anchors/ceiling clamps (order separately). Tray attaches to the Trapeze Support Bracket with two slice washers from the Splice Washer & Bolt Kit (P/N X01). Can be used to support multiple trays of varying widths; the combined width of multiple trays must not exceed the width of the tray stated in the order table below. Manufactured from steel; length varies, sold individually. Edge Hanger Use in pairs to support wire mesh cable tray from the ceiling using threaded rod. Installation requires a single 3/8 or 1/4 threaded rod, two hex nuts, one 3/8 or two 1/4 flat washers, one split lock washer and an appropriate anchor/ceiling clamp (order separately). The side of the tray is supported in the two J-shaped hooks at the bottom of the hanger; use pliers to close hooks and secure tray once cable has been loaded. Use in pairs to support a single cable tray. Manufactured from steel X04 L Support Bracket, for 4 (100) Tray 1 (0.5) X08 L Support Bracket, for 8 (200) Tray 2 (0.9) X12 L Support Bracket, for 12 (300) Tray 2 (0.9) X16 L Support Bracket, for 16 (400) Tray 3 (1.4) X20 L Support Bracket, for 20 (500) Tray 3 (1.4) X24 L Support Bracket, for 24 (600) Tray 4 (1.8) X12 Trapeze Support Bracket, for 12 (300) Tray 2 (0.9) X16 Trapeze Support Bracket, for 16 (400) Tray 2 (0.9) X20 Trapeze Support Bracket, for 20 (500) Tray 3 (1.4) X24 Trapeze Support Bracket, for 24 (600) Tray 3 (1.4) X01 Edge Hanger, Pack of 50 7 (3.2) X=finish; 5=Zinc, 6=Pre-Galvanized, 7=Black, E=Glacier White. 6-5 CPI:

3 ONTRAC WIRE MESH CABLE TRAY ACCESSORIES Center Support Bracket Use to support wire mesh cable tray from the ceiling with a single 3/8 threaded rod. Attach tray to the Center Support Bracket with two splice washers from the Splice Washer & Bolt Kit (P/N X01), or use fold-over tabs to secure the tray on all sizes except the 4 W (100 mm) version. Used to support a single cable tray. Manufactured from steel; length varies, sold individually XX XX XX Triangle Support Bracket Use to support a wire mesh cable tray pathway along a wall. Installation requires two 3/8 lag bolts and two flat washers for plywood backer boards or two 1/4 hex cap bolts, two flat washers and two appropriate anchors for concrete walls (order separately). Attach Tray to the Triangle Support Bracket with two splice washers from the Splice Washer & Bolt Kit (P/N X01), or use the fold-over tab at the end of the bracket to secure the tray. Manufactured from steel; height and length vary, sold individually. Wall-Mount Angle Use to support the end of wire mesh cable tray against the wall. Installation requires two 1/4 lag bolts and two flat washers for plywood backer boards or two 1/4 hex cap bolts, two flat washers and two appropriate anchors for concrete walls (order separately). Tray attaches to the Wall-Mount Angle with two splice washers from the Splice Washer & Bolt Kit (P/N X01). Manufactured from steel; length varies, sold individually X04* Center Support Bracket, for 4 (100) Tray 1 (0.5) X08* Center Support Bracket, for 8 (200) Tray 1 (0.5) X12* Center Support Bracket, for 12 (300) Tray 2 (0.9) X16* Center Support Bracket, for 16 (400) Tray 2 (0.9) X20* Center Support Bracket, for 20 (500) Tray 2 (0.9) X24* Center Support Bracket, for 24 (600) Tray 3 (1.4) X04 Triangle Support Bracket, for 4 (100) Tray 1 (0.5) X08 Triangle Support Bracket, for 8 (200) Tray 1 (0.5) X12 Triangle Support Bracket, for 12 (300) Tray 2 (0.9) X16 Triangle Support Bracket, for 16 (400) Tray 2 (0.9) X20 Triangle Support Bracket, for 20 (500) Tray 3 (1.4) X24 Triangle Support Bracket, for 24 (600) Tray 4 (1.8) X08** Wall Mount Angle, for 8 (200) Tray 1 (0.5) X12** Wall Mount Angle, for 12 (300) Tray 1 (0.5) X16** Wall Mount Angle, for 16 (400) Tray 1 (0.5) X20** Wall Mount Angle, for 20 (500) Tray 2 (0.9) X24** Wall Mount Angle, for 24 (600) Tray 2 (0.9) X=finish; 5=Zinc, 6=Pre-Galvanized, 7=Black, E=Glacier White. *Available in Zinc, Black & Glacier White finishes only. **Available in Pre-Galvanized, Black and Glacier White finishes only. 6-6 CPI:

4 Dim. 15 W (380 mm) 24 W (610 mm) A (393.2) (612.9) B (393.2) (612.9) Junction-Splice Kit CABLE RUNWAY JUNCTION PRODUCTS Used to create a 90 degree junction splice with all types of 1-1/2 x 3/8 or 2 x 3/8 (38.1 mm x 9.53 mm and 50.8 mm x 9.53 mm) Cable Runway. (4) corner clamp plates (2) 3/8-16 x 1 3/8 trimmed head bolts (2) 3/8-16 hex nuts (2) 3/8 split lock washers X01 Junction-Splice Kit 1-1/2 x 3/8 (38mm x 9.53) Stringer 1 (0.5) X02 Junction-Splice Kit 2 x 3/8 (50.8 x 9.53) Stringer 1 (0.5) X01 UL Classified Junction Kit 1 (0.5) X=color over zinc: 0=Gold, 7=Black Dim A Dim B Cable Runway Corner Bracket X X01 Creates a radius for L, T or X-shaped intersections of Cable Runway formed when two or more pieces of Cable Runway are connected together with the Junction-Splice Kit (P/N or 16302) or Heavy-Duty Junction-Splice Kit (P/N or 16298). Single-piece welded assembly fabricated from 3/8 x 1-1/2 x.065 (9.53 mm x 38.1 mm x 1.65 mm) wall rectangular steel tubing Easy installation; brackets/hardware included 15 W (380 mm) 24 W (610 mm) X X24 Corner Bracket X=color over zinc: 0=Gold, 1=Gray, 2=Computer Gray, 7=Black, E=Glacier White. Transition Adapter Butt-Splice Kits Enables 1-1/2 x 3/8 (38.1 mm x 9.53 mm) side stringers to be spliced to 2 x 3/8 (50.8 mm x 9.53 mm) side stringers. P/N allows Swivel- Splice Kits to be used with 2 x 3/8 (50.8 mm x 9.53 mm) side stringers. Kit X01 consists of: (1) 2 Butt-Splice Kit (P/N X02) (2) steel bars Kit X01 consists of: (1) 2 Butt-Splice Kit (P/N X02) (1) 1-1/2 Butt-Splice Kit (P/N X01) (2) Gray or Black finish/color steel transition bars X=color over zinc: 0=Gold, 7=Black X01 Adapter Kit, 1-1/2 to 2 (38.1 to 50.8) 2 (0.9) X01 Transition Kit, 1-1/2 to 2 (38.1 to 50.8) 2 (0.9) 6-19 CPI:

5 CABLE RUNWAY SUPPORT PRODUCTS Adjustable Floor Support Stands, Cable Runway Use for floor support for cable runway grids. Sold in pairs Design allows mounting of any width cable runway Heights from 5 to 10 (130 mm to 250 mm) Should be securely fastened to floor (2) 2 pipe caps (2) floor flanges (2) 2 pipe (4) grid clamps (2) spacers, 3/8 x 1.5 (2) 5/8-11 threaded rod (2) 5/8 lock washers (6) 5/8-11 nuts Height X01 5 to 6 (130 to 150) X01 6 to 8 (150 to 200) X01 8 to 10 (200 to 300) X=color: 1=Gray, 2=Computer Beige, 7=Black, E=Glacier White. Adjustable Floor Support Channel, Cable Runway Use for floor support of Cable Runway. Sold in pairs Cable Runway height adjustable from 3 to 8 (80 mm to 200 mm) Must be securely fastened to floor with 5/8 rods and anchors (included) Runway X12 12 (300) X15 15 (380) X18 18 (460) 1/2 Pair Shown X=color: 1=Gray, 2=Computer Beige, 7=Black, E=Glacier White. To install the anchors, use the specially designed anchor setting tool (P/N ); sold separately CPI:

6 CABLE RUNWAY SUPPORT PRODUCTS The Cable Runway Center Support Kit is available in sizes to support 6 to 24 W (150 mm to 610 mm) cable runway. Not included: Threaded Rod (P/N X) and Ceiling Support Bracket (P/N ). Cable Runway Center Support Kit This kit has been designed to make installation of cable runway in the ceiling even easier by using just a single point of attachment. The center attachment design not only makes installation easy, but also provides quick and simple cable routing with no need to thread the cable between the runway supports. The support kit securely attaches to the cable runway stringer, eliminating possible dislocations. Made of steel Provides an open support system with quick and simple cable routing Threaded rod cover protects cable insulation from damage (1) support bracket (1) reinforcement bar (2) 5/8-11 hex nuts (1) 5/8 split lock washers (1) 12 L (300 mm) threaded rod cover (1) J-bolt kit (2 J-bolts; 2 nuts; 2 washers) - Dim. A X06 6 (150) 6.56 (166.6) 2 (0.9) X12 12 (300) (319.0) 2 (0.9) X15 15 (380) (411.5) 3 (1.4) X18 18 (460) (487.7) 4 (1.8) X24 24 (610) (640.1) 5 (2.3) X=color: 1=Gray, 2=Computer Beige, 7=Black, E=Glacier White. Kits have gold colored hardware. Gray (-1) and Black (-7) kits have black colored hardware. Post and bracket are gold over zinc plating or painted gray, black or white. White kits include gold color hardware. Gray and Black kits include black color hardware. End cap is black. Cable Retaining Post Provides extra cable depth to existing 1-1/2 (38 mm) cable runway installation. Mounts onto Cable Runway side stringers. Post is 1/2 x 1 x.065 (12.7 mm x 25.4 mm x 1.7 mm) wall rectangular steel tubing; bracket is 1046 steel (1) Post, bracket and end cap (1) 1/4-20 x 1-1/4 hex cap screw, split lock washer and hex nut Height A X06 6 (150) 1 (0.5) X08 8 (200) 1 (0.5) X10 10 (250) 1 (0.5) X56 6 (150), Pack of (13.2) X58 8 (200), Pack of (15.0) X50 10 (250), Pack of (17.2) X=color: 1=Gray, 2=Computer Beige, 7=Black, E=Glacier White. Kits have gold colored hardware. Gray (-1) and Black (-7) kits have black colored hardware. End caps are black CPI:

7 CABLE RUNWAY ACCESSORIES Gold and Beige kits include gold color hardware. Gray and Black kits include black color hardware. Tray rests on cross members between stringers. Cable Runway Insulator Bar Kit Electrically isolates Cable Runway sections, isolating grounded sections of runway or where strong EMI/RFI fields could generate eddy-currents, which could disturb down-line equipment. Made of durable, non-conductive Delrin. (2) insulator bars, 1.5 H x 3/8 W x 5.5 L (38 mm x 9.53 mm x 140 mm) (2) butt-splice kits (P/N/ ) End Closing Kit, Cable Runway Used to close an unspliced end of Cable Runway. Made of 3/8 x 1-1/2 x.065 (9.53 mm x 38 mm x 1.65 mm) thick rectangular steel tubing. (1) end closing bar (4) corner clamp plates (2) 3/8-16 x 1 3/8 trimmed round head square neck bolts (2) 3/8-16 hex nuts X=color: 0=Gold, 1=Gray, 2=Computer Beige, 7=Black, E=Glacier White. Kits have gold colored hardware. Gray (-1) and Black (-7) kits have black colored hardware Insulator Bar Kit, 1 Kit 2 (0.9) Insulator Bar Kit, 10 Kits 24 (10.9) X04 End Closing Kit, Cable Runway 4 (100) X05 End Closing Kit, Cable Runway 5 (130) X06 End Closing Kit, Cable Runway 6 (150) X09 End Closing Kit, Cable Runway 9 (230) X12 End Closing Kit, Cable Runway 12 (300) X15 End Closing Kit, Cable Runway 15 (380) X18 End Closing Kit, Cable Runway 18 (460) X20 End Closing Kit, Cable Runway 20 (510) X24 End Closing Kit, Cable Runway 24 (610) Cable Runway Tray For use with Universal (10250) Cable Runway. Material is.032 (.81 mm) thick sheet aluminum. Length is /2 /119.5 (3035 mm) X06 6 (150) 2 (0.9) X09 9 (230) 3 (1.4) X12 12 (300) 4 (1.8) X15 15 (380) 5 (2.3) X18 18 (460) 6 (2.7) X24 24 (610) 9 (4.1) X=color: 1=Gray, 2=Computer Beige, 7=Black, E=Glacier White. CPI: