FiberGuide Fibre Management Systems

Size: px
Start display at page:

Download "FiberGuide Fibre Management Systems"

Transcription

1 FiberGuide Fibre Management Systems

2 Table of Contents Introduction Features and Benefits New Products System Description Patch Cord Densities Applications Combining System Parts Downspout Drop Options Express Exit Drop Options Trumpet Flare Options Raceway Reconfigurations x12 Island T Feeding Next Generation Frame Supporting Overhead Systems x2 System Fittings Downspouts and Attachments Straight Section and Junction x6 System Fittings and Downspouts Straight Section and Junction x4 System Fittings Downspouts and Attachments Straight Section and Snap-Fit Junction x6 System Fittings Downspouts and Attachments Straight Section and Snap-Fit Junction x12 System Fittings Downspouts and Attachments Straight Section and Snap-Fit Junction Express Exit Family Vertical Slotted Duct Systems 1"x 2" and 2"x 2" "x 4" and 4"x 4" Support Kits 2x2 System x6, 4x4, 4x6 Systems x12 System Accessories

3 Table of Contents Dimensional Drawings 2x2 System x6 System x4 System x6 System x12 System Express Exit TM Family Support Kits Plenum FiberGuide System System Description Typical Installations Patch Cord Densities Plenum Express Exit TM Family x2 System x6 System x12 System Accessories Index

4 FiberGuide Fibre Management System Introduction The Industry s Most Comprehensive Optical Raceway System ADC KRONE s FiberGuide fibre management system offers the greatest breadth of optical raceway products in the industry. In response to customer requirements, ADC KRONE continues to innovate and improve the FiberGuide system, adding greater flexibility and driving down installation time to ensure a smooth deployment. The FiberGuide raceway system is designed to protect and route fibre optic patch cords, multi-fibre cable assemblies and intrafacility fibre cable (IFC) to and from fibre splice enclosures, fibre distribution frames and fibre optic terminal devices. The FiberGuide system ensures a two-inch minimum bend radius is maintained throughout. And new tool-less SnapFit junctions, cover options and Plenum Express Exit drops significantly reduce the amount of time required for installation. The FiberGuide system is a complete set of products designed and manufactured to ensure total offframe protection and ease of use. Basic components include horizontal and vertical straight sections, horizontal and vertical elbows, downspouts, junctions and numerous support hardware and flex-tube kits. Available in a variety of sizes: 2x2 Ideal for smaller installations or for vertical routing of a maximum of four hundred 2mm fibreoptic patch cords. All 2x2 FiberGuide products are shipped with covers. 2x6 Designed for height-restricted environments, this robust system provides the same support and system flexibility of the traditional 4-inch-high system while saving 2 inches of overhead space. It features a maximum capacity of 1,200, 2mm patch cords. 4x4 Features the maximum capacity to support 1,600, 2mm patch cords. It has been engineered to allow straight sections to be selfsupporting over a span of up to 1.83m. 4x6 Features the same benefits of the 4-inch system and a maximum trough capacity of 2,400, 2mm patch cords. 4x12 The largest system in the FiberGuide family, this 12-inch-wide trough has a maximum capacity to support nearly 5,000, 2mm patch cords. Perfect for runs over fibre frame lineups and perimeter routes. See page 5 for patch cord density tables. 1

5 FiberGuide Fibre Management System Features and Benefits Features and Benefits Speed of Installation The FiberGuide system features a variety of products that allow for quick and easy installation. Express Exit drops as well as tool-less products including Snap-Fit junctions, snap-on covers and new hinged cover options save valuable time for installers. Speed of Deployment The Express Exit system enables new drops to be added or removed quickly and easily. A drop can be added into a fully loaded raceway in seconds without cutting. Raceway Flexibility The FiberGuide system features 38 support structures, over 75 fittings, multiple drop options and several other components to suit any application you create. Fibre Protection ADC KRONE s broadband expertise translates into maximum protection for your network. Two-inch minimum bend radius is maintained throughout the system regardless of the raceway size. Strength and Durability 100% raceway reliability stands up to any challenge. 2

6 FiberGuide Fibre Management System New Products ADC KRONE continues to add innovative products to FiberGuide fibre management system to ensure they remains the most comprehensive solutions for all optical raceway requirements and applications. These new products increase functionality and flexibility and are compatible with existing raceway components. Snap-Fit and Hinged Cover Options To reduce installation time, ADC KRONE introduces tool-less Snap-Fit and hinged cover options. Featuring simple, durable plastic hardware, these covers install in minutes and require no tools. The hinged cover option provides easy access, enabling installers and technicians to deploy the product quickly and easily. In addition, the covers do not need to be fully opened for maintenance. Snap-Fit Junction ADC KRONE s Snap-Fit junction is the industry s first completely tool-less junction. No additional tools are needed for installation or removal. Quick and easy to install, the FiberGuide Snap-Fit junction saves valuable time and money. Express Exits The FiberGuide system features a number of innovative Express Exit options: Low profile, 2-inch and 4-inch options round out this product line, designed to meet your most demanding network requirements. And now Plenum Express Exit systems are also available. By simply securing an Express Exit to the sidewall of a Plenum FiberGuide straight section, jumpers can be permanently or temporarily routed to the fibre optic terminal (FOT) equipment or fibre frames. No cutting is required. Positioning a drop with a member of the Express Exit family greatly simplifies installation, protects the integrity of existing fibres and increases the overall flexibility of the raceway system. 2x6 FiberGuide System The 2x6 FiberGuide system provides another option to securely route and protect patch cords. Designed for height-restricted environments, this robust system provides the same support and system flexibility of the traditional 4x6 system while saving two inches of overhead space. A complete set of fittings, straight sections, junction and an Express Exit drop are available along with adapters to both the 4x4 and 4x6 systems. Raceway Reconfiguration Solutions ADC KRONE offers two products to facilitate easy on-site raceway reconfigurations. Available for the 4x4, 4x6 and 4x12 systems, the cut-in T and the expandable straight section offer the required flexibility to optimise raceway systems in retrofit applications without jeopardizing the integrity of existing cables. NEW Hinged Cover System Express Exit Family 2x6 FiberGuide system Cut-in T 3

7 FiberGuide Fibre Management System System Description FiberGuide Materials Product Statement The FiberGuide fibre management system is a UL-listed (E151158) general purpose fibre optic raceway system. All FiberGuide products are manufactured from flame-retardant materials. No FiberGuide system parts contain PVC. The table summarizes the fire-resistant properties of FiberGuide straight sections, molded parts and flex tube. Raw Material Meets UL Requirement Finished Product Meets UL Requirement FiberGuide Straight Sections (All FiberGuide systems) FiberGuide Molded Fittings (All FiberGuide systems) FiberGuide Flex Tube (2") FiberGuide Flex Tube (1") FiberGuide Flex Tube (7/8") Flame rated: UL94V-0 Flame rated: UL94V-0 Flame rated: UL94V-0 Flame rated: UL94V-0 Flame rated: UL94V-2 UL94V-0 & UL2024 UL94V-0 & UL2024 UL2024 UL2024 UL2024 Note: FiberGuide flex tube complies with the National Electrical Code (NEC) Article and Underwriters Laboratory UL2024 requirements for General Purpose Fibre Optic Raceways. 4

8 FiberGuide Fibre Management System Patch Cord Densities Recommended capacity takes into consideration random jumper placement into the FiberGuide system. Maximum density refers to the maximum number of fibre jumpers in a given cross-section of a FiberGuide installation. The TracerLight Connector Identification system is ADC KRONE s newest patch cord solution. It features slightly different dimensions than standard patch cords. Recommended Density Recommended Patch Cord Density (per in 2 ) Trough Pileup 2-inch 3-inch 4-inch 2x2 2x6 FiberGuide System FiberGuide System 2.0 mm mm 160 Maximum Density Maximum Patch Cord Density (per in 2 ) Trough Pileup 2-inch 3-inch 4-inch 1.7 mm 480 2x2 FiberGuide System 1.7 mm mm mm mm Patch Cords mm mm Patch Cords mm mm 480 2x6 FiberGuide System 1.7 mm mm mm mm Patch Cords 90 4x4 FiberGuide System 1.7 mm mm Patch Cords mm mm x4 FiberGuide System 1.7 mm mm 3.0 mm mm Patch Cords 40 4x6 FiberGuide System 1.7 mm mm mm Patch Cords mm x12 FiberGuide System 1.7 mm mm 3.0 mm x6 4x12 FiberGuide System FiberGuide System 1.7 mm TracerLight Patch Cords 65 Patch Cords per in 2 Trough Pileup 2x2 FiberGuide System 2x6 FiberGuide System 4x4 FiberGuide System 2.0 mm 3.0 mm 1.7 mm mm 3.0 mm x6 4x12 FiberGuide System FiberGuide System 2-inch inch inch

9 Applications Combining System Parts A combination of components from the various sized raceway systems typically comprise overhead FiberGuide installations. Adapters are used to make the transition between sizes. An example of an overhead system that combines many of ADC KRONE s FiberGuide systems can be seen below. FGS x12 Straight Section 4x12 Horizontal Cross with Two 6" Exits 4x12 45º Down Elbow Trumpet Flare FGS x12 Horizontal T FGS Express Exit 4x6 45º Down Elbow FGS FGS FGS FGS FGS x6 45º Up Elbow with Cover FGS Low Profile Express Exit FGS x6 Horizontal Cross FGS x12 90º Horizontal Elbow FGS x6 90º Down Elbow FGS x12 to Dual 4x6 Adapter Trumpet Flare 4x12 Horizontal T with Single 6" Exit 4" Express Exit 2x6 Straight Section 4x6 to 2x6 Adapter FGS x6 Straight Section FGS FGS FGS FGS FGS FGS x6 90º Up Elbow with Cover FGS x6 Straight Section FGS x2 to 4x4 Adapter FGS x2 90º Horizontal Elbow Note: Junction kits are part of this assembly, but have been removed for clarity. FGS x6 90º Horizontal Elbow FGS x6 45º Horizontal Elbow FGS x6 End Cap FGS x4 to 4x6 Adapter FGS x4 90º Horizontal Elbow FGS x2 90º Horizontal Elbow 2x2 Horizontal Straight Section FGS

10 Applications Downspout Drop Options The rigid 2-inch drop option and 2-inch flex tube option are two methods for directing fibres out of overhead FiberGuide downspouts and into optical equipment bays. The rigid system is recommended because it offers excellent bend radius control and ensures a quality fibre backbone installation. FGS FGS FGS FGS FGS x6 Straight Section FGS x6 Snap-Fit Junction FGS x2 Junction Kit 4x6 Downspout *Shown without cover 4x6 End Cap Kit 2x2 Vertical Slotted Duct Kit 2"x 2" Rigid Drop Option 4x4/4x6 Downspout Insert 2x2 45 Down Elbow FGS FGS FGS FGS x2 45 Up Elbow 4x6 Straight Section 4x6 Downspout 4x6 Snap-Fit Junction 4x6 End Cap Kit Cover for 4x6 Downspout 4x4 End Cap with one 2" Flex Tube, 5' long 2x2 Vertical Slotted Duct Kit 2" Flex Tube Drop Option FGS FGS FGS FGS FGS

11 Applications Express Exit Drop Options The rigid 2-inch drop option and 2-inch flex tube drop option are two methods for delivering patch cords out of overhead FiberGuide straight sections and into optical equipment bays. The Express Exit allows a vertical transition virtually anywhere along FiberGuide straight sections. FGS x6 Straight Section FGS x2 Junction Kit (4) FGS Express Exit 2x2 * Shown without Cover FGS x2 45 Down Elbow FGS x2 Horizontal Solid Straight Section FGS "x 2" Vertical Slotted Duct Kit FGS x6 Straight Section * Shown without Cover FGS Express Exit 2x2 2"x 2" Rigid Drop Option 2" Flex Tube Drop Option FGS " Flex Tube Attachment with 5' of Flex Tube FGS "x 2" Vertical Slotted Duct Kit 8

12 Applications Trumpet Flare Options The trumpet flare is recommended at the bottom of a downspout when directing fibres into a fibre distribution bay. Trumpet flares provide bend radius protection and allow for a large number of fibre patch cords to transition into a fibre bay. A 4x4 trumpet flare is used for the 4x4 and 4x6 downspouts and a 4x6 trumpet flare is used for the 4x12 downspout. FGS x12 Horizontal T with single 6" Exit FGS x12 Horizontal Straight Section FGS x6 Downspout FGS x12 Snap-Fit Junction (2) FGS x6 Trumpet Flare Kit Horizontal T and Trumpet Flare FGS x6 Straight Section FGS New Threaded Rod Bracket Kit Downspout with Trumpet Flare 4x6 Snap-Fit Junction (2) 4x4 Trumpet Flare Kit When attaching a straight section or fitting to the exit of a 4x4 or 4x6 downspout, the FGS junction must be used. This junction is only required to connect the vertical part. JUNCTION,SNAP-FIT -X FGS FGS FGS Shown Assembled Exploded View 9

13 Applications with Raceway Reconfigurations Cut-in T and Fitting The innovative cut-in T fitting and fixture enable on-site raceway modifications without jeopardizing the integrity of installed fibres. Available in 4-, 6-, and 12-inch widths, the cut-in T fitting can be retrofitted to any installed 4-, 6-, and 12-inch straight section using the cut-in T fixture and the hardware supplied with the fitting. No special tools are required. Fixture attached to sidewall of raceway Fitting fills gap left by removed sidewall Fixture protects cables during cutting of sidewall Supplied hardware secures fitting to raceway and completes installation 10

14 Applications with Raceway Reconfigurations Expandable Straight Sections The FiberGuide expandable straight section simplifies installation and enhances the overall flexibility of the raceway system. The innovative straight section also provides an access point for future reconfigurations. Available in 4-, 6-, and 12-inch widths, the expandable straight section reduces the installation time necessary to connect opposing runs and provides continuous support for patch cords. Raceway system with gap between opposing runs Expandable straight section extends to connect runs Completed installation 11

15 Applications 4x12 Island T The 4x12 Island T is designed to be used over the ADC KRONE Next Generation Frame (NGF) or an FOT storage bay. The 4x12 Island T, a horizontal T with spool and factory-installed trumpet flare, channels fibre directly into the vertical cableways below. 4x12 Island T shown installed over an FOT storage bay ADC KRONE also offers a 12-inch island T with recessed spool (see page X). Designed to be used over the NGF or FOT storage bay, it is used in applications where the drop is positioned high above the frame and protection is required for exiting cables. The part is shipped as a T with a factory-installed, recessed spool. A junction and fitting can then be attached to manage the exiting cables. 12

16 Applications Supporting Overhead Systems A variety of support kits are available for each FiberGuide system. Whenever possible, FiberGuide support kits should be attached to existing hardware (cable racks, digital cableways, existing threaded rods or equipment racks). 2x6, 4x4, 4x6 Systems Auxiliary Framing Support Kit Unistrut Nut Kit Ladder Rack Bracket Kit New Threaded Rod Bracket Kit Auxiliary Framing Support 4x12 System Threaded Rod Threaded Rod Top of Rack/Cabinet Support Unistrut Nut Kit Trapeze Bracket Kit New Threaded Rod Bracket Kit Center Support Bracket Kit Threaded Rod Threaded Rod Threaded Rod Unistrut Support Top Support C-Bracket Center Support Bracket Kit New Threaded Rod Bracket Kit Ladder Rack Support Top Support Low Profile C-Bracket Threaded Rod Threaded Rod Trapeze Bracket Kit Top of Rack/Cabinet Support Anchor Support Threaded Rod 13

17 Applications Supporting 4x12 Systems The straight sections on the 4x12 FiberGuide system are exceptionally strong, making frequent placement of supports beneath them unnecessary. Whenever possible the supports on the 4x12 system should be placed under the fittings using the mounting bosses as shown (photos 1 and 2). This placement provides the strongest system and requires the least amount of support hardware to be used. Occasionally it is not possible to attach the support bracket to the mounting bosses on the fittings; in those instances the variable fitting support locator can be installed on the bottom of the fitting, allowing the support to be attached anywhere along the fitting bottom (photos 3, 4 and 5). When combining several 4x12 straight sections, it is recommended that support brackets are installed on both sides of each junction. Typical 4x12 system installation over a Next Generation Frame Line-up Variable Fitting Support Locator Note: see page 34 for 4x12 system fittings 14

18 2x2 System Fittings 2"H x 2"W Ordering Information Description 2x2 Horizontal T FGS x2 90 Horizontal Elbow FGS Yellow System Catalogue Number 2x2 Horizontal Cross FGS x2 90 Extended Horizontal Elbow FGS Orange System Catalogue Number Number of Junctions 2x2 horizontal T FGS FGSO cover included 2x2 horizontal cross FGS FGSO cover included two 2x2 junctions included; two additional 2x2 junctions required (see page X) 2x2 45 horizontal elbow FGS FGSO cover included 2x2 90 horizontal elbow FGS FGSO cover included 2x2 90 extended horizontal elbow FGS FGSO cover included; similar to two 45 horizontal elbows joined 2x2 45 up elbow FGS FGSO cover included 2x2 90 up elbow FGS FGSO cover included 2x2 45 down elbow FGS FGSO cover included 2x2 90 down elbow FGS FGSO cover included 2x2 to 4x4 straight adapter FGS FGSO (1) 2x2, (1) 4x4 cover included 2x2 end cap FGS FGSO includes 2x2 junction 2x2 45 Horizontal Elbow FGS x2 45 Up Elbow FGS x2 45 Down Elbow FGS x2 to 4x4 Straight Adapter FGS x2 End Cap FGS

19 2x2 System Downspouts and Attachments 2"H x 2"W Ordering Information Description Yellow System Orange System Catalogue Number Catalogue Number Number of Junctions 2x2 standard downspout FGS FGSO cover included 2x2 extended downspout FGS FGSO cover included 2x2 extended downspout, kit with 2" FGS FGSO flex tube cover included, with 2" flex tube, 2' long 2x2 trumpet flare includes 2x2 junction FGS FGSO Flex tube clamp kit of 10 FGS FGS attaches 7 /8" flex tube to rack 2x2 flex tube attachment includes 2" flex tube and a 2x2 junction 5' length FGS FGSO ' length FGS FGSO ' length FGS FGSO Dual 7 /8" flex tube attachment includes two lengths of 7 /8" flex tube and a 2x2 junction (2) 5' length FGS FGSO (2) 10' length FGS FGSO (2) 15' length FGS FGSO x2 Standard Downspout FGS Dual 7 /8" Flex Tube Attachment FGS x2 Extended Downspout FGS FGS Shown Attached to Downspout FGS Shown Attached to 2x2 FiberGuide system 2x2 Trumpet Flare FGS

20 2x2 System Straight Section and Junction 2"H x 2"W Straight Section The 2x2 straight section is a U-shaped trough that provides a protective raceway for optical fibres. Available in 6-foot lengths, the straight section carries fibres horizontally throughout the system. It can also be installed vertically when routing around obstructions. A warning label is included with each junction kit. Ordering Information Description 2x2 horizontal straight section 6' long, cover included Junction Description 2x2 junction Yellow System Orange System Catalogue Number Catalogue Number FGS FGSO The 2x2 junction is used for mechanically joining FiberGuide sections. No tools are required for assembly. Ordering Information Yellow System Catalogue Number FGS Orange System Catalogue Number FGSO x2 Horizontal Straight Section FGS x2 Junction FGS

21 2x6 System Fittings and Downspouts 2"H x 6"W Ordering Information Description Yellow System Catalogue Number 2x6 to 2x2 downspout FGS x6 horizontal T FGS x6 horizontal cross FGS x6 90 horizontal elbow FGS x6 90 down elbow FGS x6 45 horizontal elbow FGS x6 45 up elbow, metal cover included FGS x6 45 down elbow FGS Number of Junctions 2x6 to 4x4 adapter FGS (1) 2x6, (1) 4x4 2x6 to 4x6 adapter FGS (1) 2x6, (1) 4x4 2x6 trumpet flare FGS x6 end cap FGS x6 dual 2" flex tube attachment FGS

22 2x6 System Fittings and Downspouts 2"H x 6"W 2x6 to 2x2 Downspout 2x6 Horizontal T 2x6 Horizontal Cross FGS FGS FGS x6 90 Horizontal Elbow 2x6 90 Down Elbow 2x6 45 Horizontal Elbow FGS FGS FGS x6 45 Up Elbow 2x6 45 Down Elbow 2x6 to 4x4 Adapter FGS FGS FGS Metal cover included 2x6 to 4x6 Adapter 2x6 Trumpet Flare FGS FGS

23 2x6 System Straight Section 2"H x 6"W The unique four-channel design of the 2x6 FiberGuide straight section allows the standard system to be attached to the support structure without the need to cut or drill any holes within the trough. This ensures that the patch cords will not come in contact with any screw heads or bolts. Ordering Information Description 2x6 horizontal straight section, 6' long New 2x6 hinged cover kit for horizontal straight section includes three mounting hinges and three clips 6-inch snap-on cover kit for horizontal straight section includes six capture clips with mounting clasps Kit-10 black capture clips* Yellow System Catalogue Number FGS FGS FGS *see drawings on page 54 for more detail on how capture clips and hinges are used Express Exit FGS Designed for low-ceiling or height-restricted environments, the Express Exit for the 2x6 FiberGuide system extends only two inches above the straight section sidewall. The Express Exit accommodates up to 150 (3mm) patch cords, includes removable rear cable guides for additional cable management, and features a 2x2 exit opening. It is designed specifically for the 2x6 FiberGuide system and should not be used on any other FiberGuide system. Ordering Information Description Express Exit for 2x6 system includes base, cover, mounting hardware, and support bracket Yellow System Catalogue Number FGS x6 Straight Section FGS NEW Hinged Cover Kit for Horizontal Straight Section FGS inch snap-on cover FGS Express Exit 2x6 FGS

24 2x6 System Junction 2"H x 6"W The one-piece junction employs factory-installed setscrews to assure strength and durability. No cutting or drilling of the components is required for assembly. A warning label is included with each junction kit. Ordering Information Description 2x6 junction Yellow System Catalogue Number FGS x6 Junction FGS

25 4x4 System Fittings 4"H x 4"W Ordering Information Yellow System Orange System Fixed Yellow System Snap-on Cover Orange System Snap-on Cover Metal Cover Number of Description Catalogue No. Catalogue No. Catalogue No. Catalogue No. Catalogue No. Junctions 4x4 horizontal T FGS FGS FGSO FGSO FGS x4 horizontal cross FGS FGS FGSO FGSO FGS x4 90 horizontal elbow FGS FGS FGSO FGSO FGS x4 90 up elbow FGS FGS FGSO FGSO metal cover included 4x4 90 down elbow FGS FGS FGSO FGSO FGS x4 45 horizontal elbow FGS FGS FGSO FGSO FGS x4 45 up elbow FGS FGS FGSO FGSO metal cover included 4x4 45 down elbow FGS FGS FGSO FGSO FGS x4 to 4x6 straight FGS FGS FGSO FGSO FGS (1) 4x4, adapter (1) 4x6 4x4 expandable FGS FGSO straight section 4x4 cut-in T FGS FGSO assembly hardware included Cut-in T fixture FGS FGS x4 end cap FGS FGS

26 4x4 System Fittings 4"H x 4"W 4x4 Horizontal T 4x4 Horizontal Cross 4x4 90 Horizontal Elbow FGS FGS FGS x4 90 Up Elbow 4x4 90 Down Elbow 4x4 45 Horizontal Elbow FGS FGS FGS Metal cover included 4x4 45 Up Elbow FGS Metal cover included 4x4 45 Down Elbow FGS x4 to 4x6 Straight Adapter FGS x4 Expandable Straight Section FGS x4 Cut-in T FGS Cut-in T Fixture FGS (Shown on straight section) 4x4 End Cap FGS Snap-on Plastic Cover (Shown attached to 45 horizontal elbow with junctions) FGS

27 4x4 System Downspouts and Attachments An array of 4x4 downspout options are available to feed fibre from overhead straight sections into fibre optic equipment below. Ordering Information Yellow System Orange System Number of Description Catalogue Number Catalogue Number Junctions 4x4 downspout FGS FGSO * Cover for 4x4 downspout FGS FGSO x4 extended downspout FGS FGSO Cover for 4x4 extended downspout FGS FGSO x4 insertable downspout FGS FGSO x4 trumpet flare used on both FGS FGSO x4 and 4x6 downspouts no 4" junction kit required 4x4 downspout exit junction kit FGS FGSO x4/4x6 downspout insert FGS FGS converts bottom of downspout to 2"x 2" without using 2" to 4" adapter, saving vertical space 4" square to 2" round adapter with flex tube one 4x4 junction kit (FGS-MJWR-A) required to attach to a downspout drop 5' length FGS FGSO ' length FGS FGSO ' length FGS FGSO x4 dual 2" flex tube attachment no 4x4 junction kit required (2) 5' length FGS FGSO (2) 10' length FGS FGSO (2) 15' length FGS FGSO x4 single 2" flex tube attachment no 4x4 junction kit required 5' length FGS FGSO ' length FGS FGSO ' length FGS FGSO x4 quad 2" flex tube attachment no 4x4 junction kit required (4) 5' length FGS FGSO (4) 10' length FGS FGSO (4) 15' length FGS FGSO x4 quad 7 /8" flex tube attachment no 4x4 junction kit required (4) 5' length FGS FGSO (4) 10' length FGS FGSO (4) 15' length FGS FGSO *A third junction is needed if drop is to a fitting or straight section. This drop junction must be a junction type FGS-MJWR-A. 24

28 4x4 System Downspouts and Attachments 4x4 Downspout Cover for 4x4 Downspout 4x4 Extended Downspout FGS FGS FGS (Shown with and without cover) 4x4 Insertable Downspout FGS x4 Trumpet Flare FGS x4 Downspout Exit Junction Kit FGS x4/4x6 Downspout Insert 4" Square to 2" Round 4x4 Dual 2" FGS Adapter with Flex Tube Flex Tube Attachment FGS FGS Requires FGS Junction Kit 4x4 Single 2" Flex Tube Attachment FGS " Quad Flex Tube Attachment FGS Fibre Cable Raceway Systems 25

29 4x4 System Straight Section 4"H x 4"W The unique four-channel design of the 4x4 FiberGuide straight section allows the standard system to be attached to the support structure without the need to cut or drill any holes within the trough. This ensures that the patch cords will not come in contact with any screw heads or bolts, an important consideration in 4x4 systems where higher cable counts apply increased pressure on patch cords at the bottom of the trough. Ordering Information Description Yellow System Catalogue Number *see drawings on page 57 for more detail on how capture clips and hinges are used 4x4 Horizontal 4x4 Expandable NEW 4x4 Hinged Cover for Straight Section Straight Section Horizontal Straight Section FGS FGS FGS Orange System Catalogue Number 4x4 horizontal straight section FGS FGSO ' long 4x4 expandable straight section FGS FGSO NEW 4x4 hinged cover kit for horizontal straight FGS FGSO section includes three mounting hinges and three clips 4x4 snap-on cover kit for horizontal straight section FGS FGSO includes six capture clips with mounting clasps Vertical spring hinges, kit of 3 FGS FGS Kit 10 black capture clips* FGS FGS Kit 10 black capture clips and 10 hinges* FGS FGSO (Yellow Hinge) (Yellow Hinge) 4x4 Snap-On Cover for Horizontal Straight Section FGS

30 4x4 Snap-Fit Junction 4"H x 4"W The Snap-Fit junction assembly is available for the 4-inch FiberGuide system. The Snap-Fit junction is a completely tool-less junction. No additional tools are required for installation or removal. The junction exhibits superior holding force and accommodates support brackets. A warning label is included with each junction kit. Ordering Information Description 4x4 Snap-Fit junction Yellow System Catalogue Number FGS Orange System Catalogue Number FGSO x4 Snap-Fit Junction FGS

31 4x6 System Fittings 4"H x 6"W Ordering Information Yellow System Orange System Fixed Yellow System Snap-on Cover Orange System Snap-on Cover Metal Cover Number of Description Catalogue No. Catalogue No. Catalogue No. Catalogue No. Catalogue No. Junctions 4x6 horizontal T FGS FGS FGSO FGSO FGS x6 horizontal FGS FGS FGSO FGSO FGS cross 4x6 90 FGS FGS FGSO FGSO FGS horizontal elbow 4x6 90 up FGS FGSO elbow metal cover included 4x6 90 down FGS FGS FGSO FGSO FGS elbow 4x6 45 FGS FGS FGSO FGSO FGS horizontal elbow 4x6 45 up FGS FGS FGSO FGSO elbow metal cover included 4x6 45 down FGS FGS FGSO FGSO FGS elbow 4x4 to 4x6 FGS FGS FGSO FGSO FGS (1) 4x4, straight adapter (1) 4x6 4x12 to single FGS FGS FGSO FGSO x6 adapter 4x6 expandable FGS FGS straight section 4x6 cut-in T FGS FGSO assembly hardware included Cut-in T fixture FGS FGS x6 end cap FGS FGS

32 4x6 System Fittings 4"H x 6"W 4x6 Horizontal T 4x6 Horizontal Cross 4x6 90 Horizontal Elbow FGS FGS FGS x6 90 Up Elbow 4x6 90 Down Elbow 4x6 45 Horizontal Elbow FGS FGS FGS Cover included 4x6 45 Up Elbow 4x6 45 Down Elbow 4x4 to 4x6 Straight Adapter FGS Cover included FGS FGS x6 Expandable 4x6 Cut-in T Cut-in T Fixture Straight Section FGS FGS FGS (Shown on a straight section) 4x12 to Single 4x6 Adapter FGS COVER FGS x6 End Cap FGS Snap-on Plastic Cover (Shown attached to 45 horizontal elbow with junctions) FGS

33 4x6 System Downspouts and Attachments An array of 4x6 downspouts and attachments are available to feed fibre from overhead straight sections into fibre optic equipment below. All 4x6 downspouts feature 4-inch exits and attach to the 4-inch exit attachments listed below. Ordering Information Description Yellow System Orange System Catalogue Number Catalogue Number Number of junction kits 4x6 downspout FGS FGSO * Note: If a trumpet flare is required use a 4x4 flare (FGS-MTRM-A or FGSO-MTRM-A) Cover for 4x6 downspout and dual downspout FGS ** FGSO ** 4x6 extended downspout FGS FGSO Cover for 4x6 extended downspout FGS FGSO x6 insertable downspout FGS FGSO x6 dual drop downspout FGS FGSO * Trumpet flare for dual drop downspout (kit of 2) FGS FGSO x6 dual drop downspout with divider FGS FGSO Trumpet flare for dual drop downspout FGS FGSO with divider (kit of 2) 4x4 downspout exit junction FGS FGSO x4/4x6 downspout insert converts bottom FGS FGS of downspout to 2"x 2" without using 2" to 4" adapter, saving vertical space 4x4 trumpet flare used on both 4x4 and 4x6 FGS FGSO downspouts no 4" junction kit required 4x4 square to 2" round adapter with flex tube one 4x4 junction kit (FGS-MJWR-A) required to attach to a downspout drop 5' length FGS FGSO ' length FGS FGSO ' length FGS FGSO x4 dual 2" flex tube attachment no 4x4 junction kit required (2) 5' length FGS FGSO (2) 10' length FGS FGSO (2) 15' length FGS FGSO x4 single 2" flex tube attachment no 4x4 junction kit required 5' length FGS FGSO ' length FGS FGSO ' length FGS FGSO x4 quad 2" flex tube attachment no 4x4 junction kit required (4) 5' length FGS FGSO (4) 10' length FGS FGSO (4) 15' length FGS FGSO x4 quad 7 /8" flex tube attachment no 4x4 junction kit required (4) 5' length FGS FGSO (4) 10' length FGS FGSO (4) 15' length FGS FGSO *A 4x4 junction is needed to drop to a fitting or a straight section. This drop junction must be a junction type FGS **Dual downspout requires two covers. 30

34 4x6 System Downspouts and Attachments 4x6 Downspout FGS Cover for 4x6 Downspout FGS x6 Extended Downspout FGS (Shown with and without cover) 4x6 Insertable Downspout 4x6 Dual Downspout 4x6 Dual Downspout FGS FGS with Divider FGS Trumpet Flare Kit for 4x6 Dual Downspout Trumpet Flare Kit for Dual Downspout with Divider 4x4 Single 2" Flex Tube Attachment FGS FGS FGS x4 Trumpet Flare Kit 4x4/4x6 Downspout Insert Downspout Exit Junction Kit FGS FGS FGS " Square to 2" Round Adapter with Flex Tube FGS-0010 Requires FGS Junction Kit 4x4 Dual 2" Flex Tube Attachment FGS " Quad Flex Flex Tube Attachment FGS

35 4x6 System Straight Section and Junction 4"H x 6"W The unique four-channel design of the 4x6 FiberGuide straight sections allows the standard system to be attached to the support structure without the need to cut or drill any holes within the trough. This ensures that the patch cords will not come in contact with any screw heads or bolts, an important consideration in 4x6 systems where higher cable counts apply increased pressure on patch cords at the bottom of the trough. Straight Section Ordering Information Description 4x6 Horizontal Straight Section FGS x6 Expandable Straight Section FGS Yellow System Catalogue Number *see drawings on page 59 for more detail on how capture clips and hinges are used NEW Hinged Cover Kit for Horizontal Straight Section FGS Orange System Catalogue Number 4x6 horizontal straight section, 6' long FGS FGSO x6 expandable straight section FGS FGSO x6 slack storage straight section FGS FGSO NEW 4x6 hinged cover kit for horizontal straight FGS FGSO section includes three mounting hinges and three clips 6" snap-on cover kit for horizontal straight section FGS FGSO includes six quick knobs with mounting clasps Vertical spring hinges FGS FGS Kit-10 black capture clips FGS FGS Kit-10 black capture clips and 10 hinges FGS FGSO (yellow hinge) (orange hinge) 6" Snap-on Cover for Horizontal Straight Section FGS

36 4x6 Snap-Fit Junction 4"H x 6"W The Snap-Fit junction assembly is available for the 6-inch FiberGuide system. The new junction is a completely tool-less junction. No additional tools are required for installation or removal. The Snap-Fit junction exhibits superior holding force and accommodates support brackets. A warning label is included with each junction kit. Ordering Information Description Yellow System Catalogue Number Orange System Catalogue Number 4x6 Snap-Fit Junction FGS x6 Snap-Fit junction FGS FGSO

37 4x12 System Fittings 4"H x 12"W Ordering Information Description Yellow System Catalogue No. Yellow System Snap-on Cover Catalogue No. Orange System Catalogue No. Orange System Snap-on Cover Catalogue Sys. Number of Junctions 4x12 horizontal T FGS FGS FGSO FGSO x12 horizontal cross FGS FGS FGSO FGSO x12 90 horizontal FGS FGS FGSO FGSO elbow 4x12 90 down elbow FGS FGS FGSO FGSO x12 45 horizontal FGS FGS FGSO FGSO elbow 4x12 45 up elbow FGS FGS FGSO FGSO x12 45 down elbow FGS FGS FGSO FGSO x12 horizontal T FGS FGS FGSO FGSO (2) 4x12, with single 6" exit (1)4x6 4x12 horizontal cross FGS FGS FGSO FGSO (2) 4x12, with two 6" exits (2) 4x6 4x12 to dual 4x6 FGS FGS FGSO FGSO (1) 4x12, adapter (2) 4x6 4x12 to single 4x6 FGS FGS FGSO FGSO (1) 4x12, adapter (1) 4x6 4x12 to 4x6 right FGS FGS adapter includes fastening hardware Fixed metal cover for FGS FGS right adapter 4x12 to 4x6 left adapter FGS FGS includes fastening hardware Fixed metal cover for FGS FGS left adapter 4x12 end cap FGS FGS x12 expandable FGS FGSO straight section 4x12 cut-in T FGS FGSO Cut-in T fixture FGS FGS Variable support locator kits Each kit contains all necessary mounting hardware. Fitting sold separately Kit for: FGS FGS FGS FGS FGS FGS FGS FGS FGS FGS FGS FGS FGS FGS FGS FGS-MHXP-B/F FGS-MHXP-B/F-VS FGS-MHXP-B/F-VS Snap-on cover installation 34

38 4x12 System Fittings 4"H x 12"W 4x12 Horizontal T 4x12 Horizontal Cross 4x12 90 Horizontal Elbow 4x12 90 Down Elbow FGS FGS FGS FGS x12 45 Horizontal Elbow 4x12 45 Up Elbow 4x12 45 Down Elbow 4x12 Horizontal T with FGS FGS FGS Single 6" Exit FGS x12 Horizontal Cross 4x12 to Dual 4x6 Adapter 4x12 to Single 4x6 4x12 to 4x6 with Two 6" Exits FGS Adapter Adapter Right FGS FGS FGS x12 to 4x6 Adapter Left 4x12 End Cap 4x12 Expandable 4x12 Cut-in T FGS FGS Straight Section FGS FGS Cut-in T Fixture FGS (Shown on a straight section) 35

39 4x12 System Downspouts and Attachments An array of 4x12 downspouts and attachments are available to feed fibre from overhead straight sections into fibre optic equipment below. The 4x12 downspout features a 4x6 exit and accepts the 4x6 exit attachments listed below. Ordering Information Description Yellow System Catalogue Number Orange System Catalogue Number *An additional junction is needed if drop is to fitting or straight section. This 4x6 junction must be a junction type FGS Number of Junction Kits 4x12 downspout FGS FGSO * 4X12 Insertable downspout FGS FGSO Cover for 4x12 downspout FGS FGSO x12 trumpet flare FGS FGSO x12 downspout with rear T FGS FGSO * 4x12 Island T with spool and factory FGS FGSO installed trumpet flare designed for use over ADC KRONE Next Generation Frame Storage Bay 4x12 Island T with trumpet and dividing spool FGS FGSO designed for use over ADC KRONE 600mm wide Next Generation Frame Variable Support Locator Kit included 4x12 Island T with recessed dividing spool FGS FGSO x6 dual 2" flex tube attachment 5' length FGS FGSO ' length FGS FGSO ' length FGS FGSO x6 trumpet flare kit FGS FGSO used on 4x12 downspouts 4x12 to 4x4 downspout converter FGS FGS converts downspout opening to accept 4x4 slotted duct 4x12 to 2x2 downspout converter FGS FGS

40 4x12 System Downspouts and Attachments 4x12 Downspout Cover for 4x12 Downspout 4x12 Trumpet Flare FGS FGS FGS x12 Downspout with Rear T FGS x6 Dual 2" Flex Tube Attachment FGS x12 Island T FGS x6 Trumpet Flare Kit Shown Alone and Attached to 4x12 Downspout FGS Attached to Both the 4x12 Downspout and the 4x4 Slotted Duct without the use of hardware 4x12 Island T with Recessed Dividing Spool FGS (Shown with 12" Junction, 90º Down Elbow and Trumpet Flare) 4x12 to 4x4 Downspout Converter FGS

41 4x12 System Straight Section 4"H x 12"W The unique nine-channel design of the 4x12 FiberGuide straight sections provides unmatched strength and allows the attachment of support structure without the need to cut or drill holes within the raceway. This ensures that the patch cords will not come in contact with any screw heads or bolts, an important consideration in 4x4, 4x6, and 4x12 systems where higher cable counts apply increased pressure on the patch cords at the bottom of the raceway. The 4x12 system covers feature a snap-on design. This allows the cover to be used in environments with limited headroom. Two 3-foot cover sections come with each order; the shorter length makes it easier for one person to remove the covers. Each cover kit includes a tether kit. The straight section covers are designed to be placed over the 4x12 downspouts, speeding installation time by reducing the number of measurements and cuts that need to be made. 4x12 Horizontal Straight Section FGS New 12" Hinged Cover for Horizontal Straight Section FGS Ordering Information 4x12 Horizontal Straight Section Cover (includes two 3' Lengths and Tethering Hardware) FGS x12 Straight Section Cover in Tethered Position 4x12 Expandable Straight Section FGS x12 Straight Section Cover Attached to Straight Section Yellow System Orange System Description Catalogue Number Catalogue Number 4x12 horizontal straight section, 6' long FGS FGSO x12 expandable straight section FGS FGSO x12 slack storage straight section FGS FGSO New 4x12 hinged cover kit FGS FGSO for horizontal straight section, includes five mounting hinges and three clips Kit-10 black capture clips* FGS FGSO x12 snap-on cover kit* FGS FGSO for horizontal straight section includes two 3' covers, optional tethering kit *see drawings on page 62 for more detail on how capture clips and hinges are used 38

42 4x12 Snap-Fit Junction 4" H x 12" W The new Snap-Fit junction is available for the 12-inch (30 48cm) FiberGuide system. The Snap-Fit junction is a completely tool-less junction. No additional tools are required for installation or removal. The Snap-Fit junction exhibits superior holding force and accommodates support brackets. Ordering Information Description 4x12 Snap-Fit junction Yellow System Catalogue Number FGS Orange System Catalogue Number FGSO x12 Snap-Fit Junction FGS

43 Express Exit Family For 4x4, 4x6, and 4x12 Systems The patented* Express Exit family accommodates various raceway environments and applications. By simply securing an Express Exit to the sidewall of any 4x4, 4x6, or 4x12 FiberGuide straight section, jumpers can be permanently or temporarily routed to fibre optic terminal (FOT) equipment below. No cutting of the FiberGuide system is required. Positioning a drop with a member of the Express Exit family greatly simplifies installation, protects the integrity of fibres already present in the raceway, and increases overall flexibility of the raceway system. All Express Exits guarantee 2-inch bend radius protection. Express Exit Family Express Height Above Exit 3mm Patch 2mm Patch Hinged Exit Fin Exit Style Sidewall Opening Cord Capacity Cord Capacity Rear Cover Inserts 2-Inch Express Exit 4" 2" x 2" No No Low-Profile Express Exit 2" 2" x 2" No No 4-Inch Express Exit 4" 4" x 4" Yes Yes 1 Accepts all standard 2"x 2" attachments. 2 Accepts all standard 4"x 4" attachments. 4-Inch Express Exit The 4-Inch Express Exit is designed to distribute and manage medium cable counts to FOT or FDF equipment. It features a 4-inch by 4-inch exit opening to accept all standard 4x4 downspout attachments and includes insertable exit fins and removable rear cable guides for additional cable management. See page X for 4-Inch Express Exit downspout attachments. Ordering Information Description *Other patents pending Yellow System Catalogue Number 4-Inch Express Exit Orange System Catalogue Number 4-Inch Express Exit FGS FGSO includes base, base cover, mounting hardware, support bracket, and exit inserts 4-Inch Express Exit rear hinged cover kit FGS FGSO one 4x4, 4x6, 4x12 rear hinged cover 4-Inch Express Exit rear hinged cover for 4x4 raceway FGS FGSO Inch Express Exit rear hinged cover for 4x6 raceway FGS FGSO Inch Express Exit rear hinged cover for 4x12 raceway FGS FGSO

44 Express Exit Family For 4x4, 4x6, and 4x12 Systems 2-Inch Express Exit The 2-Inch Express Exit accommodates up to 350, 2mm patch cords. The patch cords are routed from a 4x4, 4x6, or 4x12 straight section to FOT equipment below the raceway. Ordering Information 2-Inch Express Exit Description 2-Inch Express Exit includes base, base cover, mounting hardware, and support bracket Low-Profile Express Exit Designed for low-ceiling or height-restricted environments, the low-profile Express Exit features a front-removable cover and extends only 2 inches above the FiberGuide straight section sidewall. It also includes removable rear cable guides for additional cable management. Ordering Information Description Low-Profile Express Exit includes base, base cover, mounting hardware, and support bracket Attachments for 2-Inch Express Exit and Low-Profile Express Exit Ordering Information Description Yellow System Catalogue Number FGS Yellow System Catalogue Number FGS Yellow System Catalogue Number Orange System Catalogue Number FGSO Low-Profile Express Exit Orange System Catalogue Number FGSO Orange System Catalogue Number 2x2 trumpet flare FGS FGSO includes junction Single 2" flex tube attachment includes 2" flex tube and a 2x2 junction to attach to Express Exit unit 5' length FGS FGSO ' length FGS FGSO ' length FGS FGSO Dual 7 /8" flex tube attachment includes two lengths of 7 /8" flex tube and a 2" junction to attach to Express Exit unit (2) 5' lengths FGS FGSO (2) 10' lengths FGS FGSO (3) 15' lengths FGS FGSO

45 Vertical Slotted Duct Systems 1"x 2" and 2"x 2" Ordering Information Description 2"x 2" Vertical Slotted Duct Kit 4" Slot Spacing FGS "x 1" Vertical Slotted Duct Kit FGS "x 2" Vertical Slotted Duct Kit 1.5" Slot Spacing FGS "x 2" to 2"x 1" Conversion Piece FGS Yellow System Catalogue Number Orange System Catalogue Number Kits 2"x 2" vertical slotted (4" slot spacing) duct kit FGS FGSO ' long includes duct, cover, hose end clamp and five universal mounting brackets 2"x 2" vertical slotted (1.5" slot spacing) duct kit FGS FGSO ' long includes duct, cover, hose end clamp and five universal mounting brackets 2"x 2" vertical solid duct kit FGS FGSO ' long includes duct, cover, hose end clamp and five universal mounting brackets 2"x 1" vertical slotted duct kit (4" slot spacing) FGS FGSO ' long includes duct, cover, hose end clamp and five universal mounting brackets 2"x 1" vertical solid duct kit FGS FGSO ' long includes duct, cover, hose end clamp and five universal mounting brackets Components 2"x 2" to 2"x 1" conversion piece order when FGS FGSO converting from 2"x 2" to 2"x 1" system 2"x 2" vertical slotted (4" slot spacing) duct, 6' long FGS FGSO "x 2" vertical slotted (1.5" slot spacing) duct, 6' long FGS FGSO Cover for 2"x 2" duct, 6' long FGS FGSO "x 2" vertical slotted duct cover clip FGS FGS "x 2" vertical duct universal mounting bracket, kit of 5 FGS FGS typically five brackets used for every 6' section of 2"x 2" vertical duct 2"x 2" Vertical Solid Duct Kit FGS "x 2" Vertical Duct Universal Mounting Brackets FGS

46 Vertical Slotted Duct Systems 2"x 4" and 4"x 4" Ordering Information Description 4"x 4" Vertical 2"x 4" Vertical 4"x 4" Vertical Slotted Slotted Duct Kit Slotted Duct Kit Adapter Junction Kit FGS FGS FGS "x 4" Vertical Duct Mounting Bracket FGS Yellow System Catalogue No. Orange System Catalogue No. Kits 4"x 4" vertical slotted, (4" slot spacing) duct kit FGS FGSO ' long includes duct, cover and three mounting brackets 2"x 4" vertical slotted, (1.5" slot spacing) duct kit FGS FGSO ' long includes duct, cover and three mounting brackets 4"x 4" vertical slotted adapter junction kit used to join FGS FGSO "x 4" vertical duct to standard 4x4 FiberGuide profile Components 4"x 4" vertical slotted duct, 6' long FGS FGSO Cover for 2"x 4" and 4"x 4" vertical slotted duct, 6' long FGS FGSO "x 4" vertical slotted duct mounting bracket FGS FGS typically three brackets used for every 6' section of 4"x 4" vertical duct 2"x 4" vertical slotted duct mounting bracket kit of 10 FGS FGS "x 4" vertical slotted duct cap FGS FGS "x 4" vertical slotted duct cover clip FGS FGS "x 4" vertical slotted duct cover clip FGS FGS

47 2x2 System Support Kits For Yellow and Orange Systems Direct Support Kits Ordering Information Description 2x2 ladder rack support kit for use with 3.5" (maximum) ladder rack 2x2 bay top support short L bracket kit 2x2 bay top support long L bracket kit 2x2 digital cableway support kit 2x2 under floor support kit can be secured to.62" to 1.2" round or square post Note: Recommended spacing of direct support kits is every 2' to 3'. Custom brackets are available, please contact ADC KRONE. 2x2 Ladder Rack Support Kit Shown Alone and Attached to Ladder Rack: FGS x2 Digital Cableway Support Kit: FGS x2 Bay Top Support Short L Bracket Kit: FGS x2 Under Floor Support Kit Shown Alone and Attached to 0.62 Round Pipe: FGS Catalogue Number FGS FGS FGS FGS FGS x2 Bay Top Support Long L Bracket Kit: FGS

48 2x2 System Support Kits For Yellow and Orange Systems Track Support Kits Ordering Information Description Catalogue No. Aluminum track support kit, 6' long, includes track connecting bar kit aluminum track is self-supporting for spans up to 6' 2x2 new threaded rod bracket kit, 5/8" used to support aluminum track kit Aluminum Track Support Kit FGS " New Threaded Rod Bracket Kit Shown Alone and Attached to Aluminum Track Support FGS-2180-XX FGS FGS x2 new threaded rod bracket kit, 1/2" used to support aluminum track kit FGS ` 2x2 existing thread rod bracket kit for up to two 2x2 FiberGuide systems FGS Track connecting bar kit used to join two aluminum track kits; order only FGS if extras are needed 2" new threaded rod bracket kit, 12mm FGS Note: Recommended spacing of track support kits is every 5' to 6'. Custom brackets are available, please contact ADC KRONE. 2" Existing Threaded Rod Bracket Kit FGS

49 2x6, 4x4, 4x6 Systems Support Kits For Yellow and Orange Systems Ordering Information Description Ladder rack cantilever support bracket kit L bay support bracket kit New threaded rod bracket kit (XX = size: 1 /2", 5 /8", 12mm, 14mm, 16mm, 18mm) Existing threaded rod bracket kit (XX = size: 1 /2", 5 /8", 12mm, 14mm, 16mm) Modified new threaded rod bracket kit, 5 /8" Top support low-profile C-bracket kit (XX = size: 1 /2", 5 /8", 12mm, 14mm, 16mm) Top support C-bracket kit (XX = size: 1 /2", 5 /8", 12mm, 14mm, 16mm) Modified existing threaded rod bracket kit, 5 /8" Center support bracket kit (XX = size: 1 /2", 5 /8", 12mm, 14mm, 16mm, 20mm) Digital cableway bracket kit, 12" Digital cableway bracket kit, 15" Ladder rack center support bracket kit OMX frame center support bracket kit, 16mm Under floor support bracket kit Custom brackets are available, please contact KRONECT COMUNICATII SRL. Ladder Rack Cantilever Support Bracket Kit FGS Existing Threaded Rod Bracket Kit Shown Alone and Attached to Threaded Rod FGS-HETR-XX L Bay Support Bracket Shown Alone and Attached to 4x4 FiberGuide FGS Modified New Threaded Rod Bracket Kit Shown Alone and Attached to Threaded Rod FGS-HNTR-5/8-A Catalogue Number FGS FGS FGS XX FGS-0120-XX FGS FGS-0610-XX-LP FGS-0610-XX FGS FGS XX FGS FGS FGS FGS FGS New Threaded Rod Bracket Kit Shown Alone and Attached to Threaded Rod FGS0610- XX Top Support C-Bracket Low Profile FGS-HNTS-XX-LP Top Support C-Bracket FGS-HNTS-XX Modified Existing Threaded Rod Bracket Kit Shown Alone and Attached to Threaded Rod FGS-HETR-5/8-A Center Support Bracket FGS-HTUB-XX +49(0)

50 4x12 System Support Kits For Yellow and Orange Systems Ordering Information Description New ladder rack center support bracket kit FGS Existing ladder rack center support bracket kit FGS XX (XX = size: 1 /2", 5 /8", 12mm, 14mm, 16mm) Trapeze bracket kit FGS XX (XX = size: 1 /2", 5 /8", 12mm, 14mm, 16mm) Center support threaded rod bracket kit FGS XX (XX = size: 1 /2", 5 /8", 12mm, 14mm, 16mm, 20mm) Top support low-profile threaded rod bracket kit FGS (XX = size: 1 /2", 5 /8", 12mm, 14mm, 16mm) (6,8,10,2) -LP Top support threaded rod bracket kit FGS (14mm) FGS (1/2) (XX = size: 1 /2", 5 /8", 12mm, 14mm, 16mm) FGS (5/8) FGS (16mm) FGS (12mm) New threaded rod bracket kit (XX = size: 5 /8", 14mm, 16mm, 18mm) Existing threaded rod bracket kit (XX = size: 5 /8", 14mm, 16mm) Custom brackets are available, please contact ADC KRONE. Existing Ladder Rack Center Support Bracket Kit Top Support Low-Profile Kit Shown Alone and Attached to Threaded Rod Trapeze Bracket Kit Top Support Threaded Rod Bracket Kit Catalogue Number FGS (5/8) FGS (12mm) FGS (5/8) FGS (16mm) Center Support Bracket Kit Shown Alone and Attached to Threaded Rod New Threaded Rod Bracket Kit Existing Threaded Rod Bracket Kit 47

51 Accessories Ordering Information Yellow System Orange System Description Catalogue Number Catalogue Number Trough cover clip kit FGS FGS " outer diameter slotted flex tube FGS X FGSO-1012-X (X = length: 5, 10, 15, 20, 25, 50, 75, 100, 125, 150, 200, 250) x=19/10/13/15/17/18/20/9/11/12/14/16 1" outer diameter slotted flex tube FGS-1012-X FGSO-1012-X (X = length: 5, 10, 15, 25, 50, 75, 100, 150, 200, 250) x=44/37/39/42/43/45/36/38/40/41 7 /8" outer diameter slotted flex tube FGS-4006-X FGSO-4006-X (X = length: 5, 10, 15, 20, 25, 50,100, 125,200, 250) x=13/5/7/9/11/12/4/6/8/10 2" outer diameter solid flex tube FGS-1012-X FGSO-1012-X (X = length: 5, 10, 15, 20, 25, 50,100,150, 200, 250) x=30/22/24/26/28/29/21/23/25/27 Single hinges for 4x4 and 4x6 covers FGS FGS Vertical spring hinges, kit of 3 FGS FGS Retainer rings, kit of 10 used to retain fibres in FGS FGS " flex tube Flex tube clamp, kit of 10 used to secure FGS FGS " flex tube to 2" vertical ducts Storage spools for dark fibre jumpers kit of 2 FGS FGS Mitre box with saw used to cut 2x2, 4x4, 4x6, FGS FGS and 4x12 FiberGuide straight sections to size Mitre box with saw used to cut 2x2, 4x4, FGS-0014 FGS-0014 and 4x6 FiberGuide straight sections to size IFC tie down for 4x4 system FGS FGS for 4x6 system FGS FGS for 4x12 system FGS FGS Quick knobs with T-bolt FGS FGS Reverse junction adapter kit for 4x4, 4x6, and 4x12 systems FGS FGS used to connect two parts rotated 180 Retrofit fin, kit of 10 FGS FGS

52 Accessories 2" Outer Diameter Slotted Flex Tube FGS-1012-X 7/8" Outer Diameter Slotted Flex Tube FGS-4006-X Single Hinges for 4" and 6" Covers FGS Retainer Rings FGS Flex Tube Clamp Storage Spools FGS FGS Retrofit Fin Set of 10 Quick Knobs Kit of 10 FGS FGS (Shown Installed) Mitre Box and Saw 49

53 Support Kit Accessories For Yellow and Orange Systems Ordering Information Description Catalogue Number Threaded rod 5 /8" 11 x 12" FGS /8" 11 x 30" FGS /8" 11 x 72" FGS /2" 13 x 12" FGS /2" 13 x 30" FGS /2" 13 x 72" FGS Threaded rod; (XX = size: 12mm, 14mm, 16mm) (NN = length: 30cm, 75cm, 180cm) Auxiliary framing kit 2" x 9 /16" x 3/16" for 5 /8" rod FGS " x 9 /16" x 3/16" for 1 /2" rod FGS Adjustable angle support brackets with 5 /8" threaded rod 11 x 36" rod FGS x 48" rod FGS Adjustable angle support brackets with 1 /2" threaded rod 13 x 36" rod FGS x 48" rod FGS Ladder rack bracket kit for radiused ladder racking FGS Ladder rack bracket kit, 1 /2", 5 /8", 12mm, 14mm, 16m FGS-0120-( ) Unistrut nut kit, 5 /8" FGS Frame mounting hardware kit (XX = size: 1 /2", 5 /8", 12mm, 14mm, 16mm) FGS (16MM) Threaded Rod Auxiliary Framing Kit Adjustable Angle Support Brackets Ladder Rack Bracket Kit Shown Alone and Attached to Ladder Rack Unistrut Nut Kit 50

54 2x2 System Parts 8.03"(20.39 cm) 7.97" (20.24 cm) 5.13" (13.03 cm) Top 2.22" (5.64 cm) Top 10.1" (25.65 cm) End 2.08" (5.28 cm) 2.0" (5.08 cm) 2.0" (5.1 cm) 2.06" (5.23 cm) Front 2.0" (5.1 cm) 4.59" (11.66 cm) 2x2 Horizontal T FGS " (5.08 cm) 2.08" (5.28 cm) 2x2 45 Horizontal Elbow FGS " (17.1 cm) Top End 2.22" (5.64 cm) 6.75" (17.1 cm) 2.08" (5.28 cm) 2x2 90 Horizontal Elbow FGS " (8.68 cm) 2x2 Horizontal Cross FGS " (5.08 cm) Front 2.0" (5.08 cm) 2.0" (5.08 cm) 2x2 90 Horizontal Elbow FGS " (5.64 cm) 2.0" (5.1 cm) End 2.08" (5.28 cm) 2x2 45 Up Elbow FGS " (11.66 cm) Side 51

55 2x2 System Parts 2.0" (5.08 cm) 2.22" (5.64 cm) 6.56" (16.7 cm) 3.32" (8.43 cm) 2.08" (5.28 cm) Top 5.67" (14.4 cm) 4.0" (10.16 cm) 2.08" (5.28 cm) End 2.0" (5.1 cm) 5" (1.3 cm) 0.5" (1.3 cm) 0.5" (1.3 cm) 2.0" (5.1 cm) End 2.0" (5.1 cm) 2x2 45 Down Elbow FGS x2 Standard Downspout FGS " (5.1 cm) 12.96" (32.92 cm) Top Front Side Bottom 4.0" (10.2 cm) 72" (182.9 cm) 4.54" (11.53 cm) Side 2x2 Horizontal Straight Section FGS " (9.04 cm) 5.02" (12.75 cm) 2.08" (5.28 cm) 1.85" (4.7 cm) 2.0" (5.08 cm) 1.85" (4.7 cm) 2.32" (5.89 cm) 2.0" (5.1 cm) 1.85" (4.7 cm) 2.0" (5.08 cm) 4.42" (11.2 cm) Front 2x2 to 4x4 Straight Adapter FGS End 5.0" (12.7 cm) 2x2 Extended Downspout FGS " 1.85" (5.28 cm) (4.7 cm) 2.0" (5.08 cm) 2x2 90º Up Elbow FGS Side 5.43" (13.89 cm) 5.07" (12.88 cm) 2.0" (5.08 cm) 4.91" (12.47 cm) 2x2 90º Down Elbow FGS

56 2x6 System Parts 14.0" (35.56 cm) 13.5" (34.29 cm) 13.5" (34.29 cm) 7.67" (19.48 c 13.5" (34.29 cm) 10.6" (26.92 cm) 2.0" (5.08 cm) 14.0" (35.56 cm) 6.0" (15.24 cm) 1.75" (4.45 cm) 6.0" (15.24 cm) 1.75" (4.45 cm) 1.125" (2.86 cm) 2x6 to 2x2 Downspout 2x6 Horizontal T 2x6 Horizontal Cross FGS FGS FGS " (26.92 cm) 1.4" (3.56 cm) 6.0" (15.24 cm) 10.6" (26.92 cm) 1.4" (3.56 cm) 1.75" (4.45 cm) 2x6 90º Horizontal Elbow FGS " (22.61 cm) 1.4" (3.56 cm) 9.1" (23.11 cm) 7.7" (19.56 cm) 6.0" (15.24 cm) " (4.45 cm) 1.75" (4.45 cm) 7.7" (19.56 cm) 6.0" (15.24 cm) 1.75" (4.45 cm) 2x6 90º Down Elbow FGS " (19.56 cm) 6.0" (15.24 cm) 5.7" (14.48 cm) 1.4" (3.56 cm) 1.4" (3.56 cm) 2x6 45º Horizontal Elbow FGS x6 45º Up Elbow FGS

57 2x6 System Parts 5.7" (14.48 cm) 1.85" (4.7 cm) 2.78" (7.06 cm) 1.75" (4.45 cm) 2.25" (5.72 cm) Side 2.25" (5.72 cm) 3.2" (8.13 cm) 8.7" (22.1 cm) 10.55" (26.8 cm) 3.4" (8.64 cm) 5.16" (13.11 cm) Low-Profile 2x6 Express Exit Downspout FGS " (15.24 cm) 4.7" (11.94 cm) 2x6 Straight Section FGS " (19.56 cm) 2.2" (5.59 cm) 5.23" (13.28 cm) 2.0".125" (5.08 cm) (.318 cm) 1.31" (3.33 cm) 2.75" (6.99 cm).125 (.32 cm) 7.7" (19.56 cm) 6.0" (15.24 cm) Side 2.0" (5.08 cm) 2.1" (5.33 cm) 2x6 45º Down Elbow FGS " (8.26 cm) 6.3" (16.0 cm) 6.0" (15.24 cm) 5.0" (12.7 cm) 8.82" (22.4 cm) FGS x6 Junction 7.4" (18.8 cm) 6.5" (16.51 cm) 10.3" (26.16 cm) 6.0" (15.24 cm) 2x6 to 4x4 Adapter 2x6 to 4x6 Adapter 2x6 Trumpet Flare FGS FGS FGS " (9.32 cm) 8.26" (20.99 cm) End 7.7" (19.56 cm) 4.5" (11.43 cm) 3.0" (7.62 cm).96" (2.44 cm) 7.5" (19.05 cm) 7.7" (19.56 cm) 1.6" (4.06 cm) 2.8" (7.11 cm) 5.5" (13.97 cm) 7.40" (18.80 cm) End 2.0" (5.08 cm) 3.9" (9.91 cm) 6.25" (1.59 cm) Straight Section (Not Included) Hinged Covers for 2x6 Straight Section FGS Straight Section (Not Included) Snap-on Covers for 2x6 Horizontal Straight Section FGS

58 FGS x4 System Parts 12.99" (33.0 cm) 12.99" (33.0 cm) 9.33" (23.7 cm) Top 12.99" (33.0 cm) Top 4.0" (10.2 cm) 4.42" (11.2 cm) 4.0" (10.2 cm) Front Front 4.42" (11.2 cm) 4.0" (10.2 cm) 9.33" (23.7 cm) 4x4 Horizontal T FGS End 5.67" (14.4 cm) 9.33" (23.7 cm) Top End 4x4 90 Horizontal Elbow FGS Side 4x4 90 Down Elbow 8.19" (20.8 cm) 4.42" (11.2 cm) FGS " (10.2 cm) 4.42" (11.2 cm) 8.19" (20.8 cm) 4.73" (12.0 cm) 8.60" (21.8 cm) 10.22" (26.0 cm) Side 8.60" (21.8 cm) 4x4 Horizontal Cross FGS R 2.0" (5.08 cm) 4x4 90 Up Elbow FGS Top 7.65" (19.4 cm) End 6.48" (16.5 cm) End Junction Detail (Not Included) 8.79" (22.3 cm) 4.0" (10.2 cm) 4.42" (11.2 cm) 4x4 45 Horizontal Elbow FGS " (26.0 cm) 55

59 4x4 System Parts 6.4" (16.3 cm) R 2.0" (5.08 cm) 8.0" (20.3 cm) 4.9" (12.4 cm) 4.42" (11.2 cm) 6.25" (15.88 cm) 7.31" (18.6 cm) 4.0" (10.16 cm) 9.9"(25.1 cm) Top Side 8.27" (21.0 cm) 4x4 45 Up Elbow FGS "(19.5 cm) Top 4x4 to 4x6 Straight Adapter FGS " (34.52 cm) 10.0" (25.4 cm) 13.0" (33.02 cm) 12.99" (32.99 cm) 4.0" (10.16 cm) 12.0" (30.48 cm) 4x4 Cut-in T FGS Junction Detail (Not Included) 6.55" (16.6 cm) 5.67" (14.4 cm) Front 4.0 " (10.2 cm) 4.0" (10.2 cm) End 5.67" (14.4 cm) 4.42" (11.2 cm) 45 Side 6.43" (16.3 cm) 4x4 45 Down Elbow FGS " (35.56 cm) Retracted Straight Section 22.0" (55.88 cm) Expanded Straight Section 4x4 Expandable Straight Section FGS " 5.67" (32.9 cm) (14.4 cm) Front Top 1.75" (4.4 cm) 4x4 Downspout FGS " (14.4 cm) 5.40" (13.72 cm) 7.98" (20.27 cm) 4.85" (12.3 cm) 4.42" (11.2 cm) 6.31" (16.0 cm).625" (Not Included) 11.0" (27.94 cm) 4.0" (10.16 cm) 8.31" (21.11 cm) 5.67" (14.4 cm) 5.25" (13.34 cm) Side End 4x4 Extended Downspout FGS S Snap-On Cover for 4" Straight Section FGS

60 4x4 System Parts R 2.0" (5.1 cm) 2.0" (5.1 cm) Top OPEN CLOSE 3.0" (7.6 cm) 8.3" (21.1 cm) 4.04" (10.26 cm) 8.40" (21.34 cm) 6.25" (15.9 cm) End 4.09" (10.39 cm) 5.42" (13.77 cm) 4.55" (11.6 cm) 4.62" (11.7 cm) 4x4 Trumpet Flare Kit FGS " (14.4 cm) 4" Square to 2" Round Adapter with Flex Tube FGS-0010-X Side X Straight Section (Not Included) Dimension X 5' (1.52 m) 10' (3.05 m) 15' (3.57 m) 6.26" (15.91 cm) End Hinged Cover for 4" Horizontal Straight Section FGS " (2.44 cm) 4.0" (10.2 cm) 4x4/4x6 Downspout Insert FGS "(14.4 cm) End 4.0" (10.2 cm) Side 72.0" (182.9 cm) 4x4 Horizontal Straight Section FGS " (17.3 cm) " (10.8 cm) x4 Snap-Fit Junction Assembly FGS " (11.6 cm) 57

61 4x6 System Parts 14.99" (38.1 cm) 14.99" (38.1 cm) 11.33" (28.8 cm) 11.33" (28.8 cm) Top 14.99" (38.1 cm) Top 11.33" (28.8 cm) Top 6.0" (15.2 cm) 6.00" (15.2 cm) End 6.0" (15.2 cm) Front 4x6 Horizontal T 4x6 Horizontal Cross 4x6 90 Horizontal Elbow FGS FGS FGS " (15.2 cm) End 7.67" (19.5 cm) Top 9.65" (24.5 cm) End 4x6 90 Down Elbow FGS Side 10.20" (25.9 cm) 4.42" (11.2 cm) 4x6 45 Horizontal Elbow FGS " (20.8 cm) Side 4.42" (11.2 cm) 4.42" (11.2 cm) 8.19" (20.8 cm) 7.98" (20.3 cm) 4.85" (12.3 cm) Front 8.6' 6.0" (15.2 cm) 8.0" (20.3 cm) 4.42" (11.2 cm) 4.5" 4.25" 3.4" (11.43 cm) (10.8 cm) (8.64 cm) 8.4" (21.3 cm) 4.9" (12.4 cm) R 2.0" (5.1 cm) 4.25" (10.8 cm) 9.9" (25.1 cm) Top Side 8.27" (21.0 cm) 6.0" (15.2 cm) 4x6 90º Up Elbow FGS x6 45 Up Elbow FGS " (19.56 cm) 7.2" (18.29 cm) End Junction Detail (Not Included) 6.55" (16.6 cm).50" (1.27 cm) 4.42" (11.2 cm) 7.67" (19.5 cm) 4.42" (11.2 cm) 6.42" (16.3 cm) 4x6 45 Down Elbow FGS

62 4x6 System Parts 15.59" (39.6 cm) 12.0" (30.48 cm) 14.0" (35.56 cm) Retracted Straight Section 6.25" (15.88 cm) 15.0" (38.1 cm) R 2.0" (5.1 cm) 2.0" (5.1 cm) Top " (26.29 cm) OPEN CLOSE 3.0" (7.6 cm) 22.0" (55.88 cm) Expanded Straight Section 4x6 Expandable Straight Section 4x6 Cut-in T 6" Trumpet Flare FGS FGS FGS " (13.77 cm) 12.96" (32.9 cm) Top 4.0" (10.2 cm) Side 72.0" (182.9 cm) Side 7.67" (19.5 cm) 1.75" (4.4 cm) Front 5.67" (14.4 cm) 4x6 Downspout FGS " (11.6 cm) 4.0" (10.2 cm) 6" Straight Section FGS " (20.99 cm) End 4.42" (11.2 cm) 7.67" (19.5 cm) 6.0" (15.2 cm) End.96" (2.44 cm) 6.31" (16.0 cm) 6.0" (15.24 cm) 14.0" (35.56 cm) 8.31" (21.11 cm) 8.8" (22.35 cm) " (13.34 cm) 5.67" (14.4 cm) 6.25" (15.9 cm) 4x6 Extended Downspout FGS Side Straight Section (Not Included) 7.40" (18.80 cm) End End Snap-On Cover for 6" Straight Section FGS " (10.8 cm) " (30.48 cm) 12.96" (32.92 cm) 4.0" (10.16 cm) 3.5" (8.89 cm) diameter 13.0" (33.02 cm).625" (1.59 cm) 1.25" (3.18 cm) Straight Section (Not Included) 6.0 Hinged Cover for 6" Straight Section 6" Snap-Fit Junction Assembly 6" Slack Storage Straight Section FGS FGS FGS

63 4x12 System Parts 12" (30.48 cm) 20.99" (53.31 cm) 12" (30.48 cm) 20.99" (53.31 cm) 13.62" (34.72 cm) Top 17.33" (44.02 cm) 4.42" 13.67" (11.23 cm) (34.72 cm) 4.42" (11.23 cm) 20.99" (53.31 cm) Top 13.67" (34.72 cm) 4x12 Horizontal T FGS x12 Horizontal Cross FGS " 4.42" (30.48 cm) (11.23 cm) 4.42" (11.23 cm) 17.33" (44.02 cm) Top 4x12 90 Horizontal Elbow FGS " (30.48 cm) 14.44" 4x12 45 Horizontal Elbow FGS " (30.48 cm) 13.67" (34.72 cm) 4x12 45 Down Elbow FGS " (34.72 cm) 13.67" (34.72 cm) 15.65" (39.75 cm) Top Side 4.42" (11.23 cm) 17.33" (44.02 cm) 6.43" (16.33 cm) 13.67" (34.72 cm) 13.67" (34.72 cm) 6" (15.24 cm) 12" (30.48 cm) 12" (30.48 cm) 8.19" (20.80 cm) Side 4x12 90 Down Elbow FGS ( 13.4" (34.04 cm) 4x12 45 Up Elbow FGS " (30.48 cm) " (34.72 cm) 17.33" 4.42" (44.01 cm) (11.23 cm) 4.42" (11.23 cm) 14.99" (38.07 cm) Top 7.67" (19.48 cm) 4x12 Horizontal T with (one) 6" Exit FGS " (20.80 cm).98" (2.49 cm) 60

64 4x12 System Parts 14.99" (38.07 cm) 12" (30.48 cm) 6" (15.24 cm) 7.67" (19.48 cm) 4.42" (11.23 cm) 12" (30.48 cm) 20.99" (53.31 cm) 13.67" (34.72 cm) Top 7.67" (19.48 cm) 4.42" (11.23 cm) 18.29" (46.46 cm) Top 10.99" (27.91 cm) 13.67" (34.72 cm) 6" (15.24 cm) 4.42" (11.23 cm) 13.67" (34.72 cm) 4x12 Horizontal Cross with (two) 6" Exits FGS " (15.24 cm) 12" (30.48 cm) 7.67" (19.48 cm) 10" (25.40 cm) 4x12 to 4x6 Adapter FGS " (35.56 cm) Retracted Straight Section 22.0" (55.88 cm) Expanded Straight Section Top 4x12 Expandable Straight Section FGS " (38.1 cm) Top 12" (30.48 cm) 13.67" (34.72 cm) 4.42" (11.23 cm) 6.25" (15.88 cm) 2.50" (6.35 cm) 2.50" (6.35 cm) 4x12 to 4x6 Dual Adapter FGS x12 End Cap FGS " (45.72 cm) 21.0" (53.34 cm) 12.0" (30.48 cm) 12.33" (31.32 cm) 13.51" (34.32 cm) 20.0" (50.8 cm) 21.59" (54.84 cm) 4x12 Cut-in T FGS " (5.08 cm) 4.44" (11.28 cm) 3.50" (8.89 cm) 6" (15.24 cm) 8.312" (21.11 cm) 16.31" (41.43 cm) 4x12 Exit Downspout FGS x12 Trumpet Kit FGS

65 4x12 System Parts 12.5" (31.75 cm) 17.3" (43.94 cm) 19.3" (49.02 cm) 10.5" (26.67 cm) 6.8" (17.27 cm) 10.5" (26.67 cm) 4.0" (10.16 cm) 8.0" (20.32 cm).16" (.41 cm) 6.3" (16.0 cm) 4.0" (10.16 cm) 4x12 T with Recessed Dividing Spool FGS " (8.89 cm) Side " (27.94 cm) 5.7" (14.48 cm) 10.7" (27.18 cm) 4x12 Straight Section FGS " (9.32 cm) " (3.81 cm) 14.43" (36.65 cm) End Straight Section (Not Included) 3.7" (9.4 cm) Hinged Cover for 12 Horizontal Straight Section FGS " (7.37 cm) 10.0" (25.4 cm) 5.0" (12.7 cm).96" (2.44 cm) 12.0" (30.48 cm) 4x12 Island T FGS " (53.34 cm) 5.0" (12.7 cm) 16.6" (42.16 cm) 11.0" (27.94 cm) 4x12 Downspout with Rear T FGS " (8.89 cm) diameter 4.25" (10.8 cm) 17.3" (43.94 cm) x12 Snap-Fit Junction FGS x12 Slack Storage Straight Section FGS

66 Express Exit Family 3.75" (9.53 cm) 2.0" (5.08 cm) Express Exit 4.91" (12.47 cm) 10.0" (25.4 cm) Bracket, Express Exit 5.8" (14.73 cm) 1.99" (5.05 cm) 4.07" (10.34 cm) Bracket, Express Exit 2x4 2-inch Express Exit (Shown Attached to 4x6 Straight Section) FGS Low Profile Express Exit 5.1" (12.95 cm) 5.2" (13.21 cm) Low-Profile Express Exit (Shown Attached to 4x4 Straight Section) FGS " (20.04 cm) Express Exit 2x4 7.73" (19.63 cm) 4-inch Express Exit (Shown Attached to 4x4 Straight Section) FGS " (26.04 cm) 16.0" (40.64 cm) 63

67 2x2 System Support Kits 2.68" (6.81 cm) Straight Section (Not Included) 2.26" (5.74 cm) Existing Ladder Rack 3.0" (7.62 cm) Support Bracket.25"(.64 cm) 3.31" (8.41 cm) Top 2.01" (5.11 cm) End Support Bracket Top 5.34 or 15.45" (13.6 or 39.2 cm) 3.64" (9.2 cm) 1.75" (4.4 cm) End 2" Ladder Rack Support Kit (Shown Alone and Attached to Ladder Rack) FGS " (3.81 cm) 4.540" (11.53 cm) Top Straight Section (Not Included) Support Bracket to " (23.05 to cm) Connector Bar Lock Washer Cap Screw Side 2" Digital Cable Way Support Kit FGS Digital Cableway (Not Included) Aluminum Extrusion End-to-End Assembly Method Aluminum Extrusion Aluminum Track Support Kit FGS Connector Bar Lock Washer Cap Screw 2.99" (7.59 cm) Support Bracket 2" Bay Top Support Short L Bracket Kit FGS FGS Side Straight Section (Not Included) Support Bracket Post 3.03" (7.69 cm) End 2" Under Floor Support Kit (Shown Attached to.62x2 Round Pipe) FGS End 2.89" (7.34 cm) 2.36" (5.99 cm) Threaded Rod (Not Included) Side Straight Section (Not Included) Aluminum Extrusion (Not Included) 2" New Threaded Rod Bracket Kit (Shown Attached to Aluminum Track Support) FGS-2180-X 64

68 2x6, 4x4, and 4x6 Systems Support Kits 1/2-13 OR 5/8-11 Threaded Rod (Not Supplied) 6.14" (15.6 cm) for 4x4 8.14" (20.7 cm) For 6x4 4.79" (12.2 cm) Existing 1/2-13 or 5/8-11 Threaded Rod 6.14" (15.6 cm) for 4x4 8.14" (20.7 cm) for 6x4 4.79" (12.2 cm) A A A A 1.0" (2.54 cm) 0.4" (1.02 cm) 0.86" (2.18 cm) 0.28" (0.71 cm) 1.75" (4.45 cm) 0.61" (1.55 cm) 6.81" (17.3 cm) 2.16" (5.49 cm) 1.5" (3.81 cm) 5.35" (13.6 cm) New Threaded Rod Bracket Kit Shown Alone and Attached to Threaded Rod FGS-0610-X Existing 1/2-13 or 5/8-11 Threaded Rod 1.88" (4.78 cm) Threaded Rod Clip 2.06" (5.23 cm) Closed-End Bracket 1.0" (2.54 cm) 1.96" (4.98 cm) 9.8" (24.89 cm) 1.5" (3.81 cm) 1.86" (4.72 cm) 3.71" (9.42 cm) 5.57" (14.15 cm) 4" Fiber Guide Shown For Reference 2.67" (6.78 cm) 10.79" (27.41 cm) 4.79" (12.17 cm) Open-End Bracket 1.5" (5.72 cm) 3.36" (8.53 cm) 5.21" (13.23 cm) 7.07" (17.96 cm) Modified Existing Threaded Rod Bracket Kit Shown Alone and Attached to Threaded Rod FGS-0120-xx OMX Frame Center Support Bracket Kit FGS " (0.71 cm) 2.0" (5.08 cm) 1.0" (2.54 cm) 0.25" (0.64 cm) 2.5" (6.35 cm) 0.5" (1.27 cm) 2.5" (6.35 cm) 0.28" (0.71 cm) 2.0" (5.08 cm) Threaded Rod Clip 2.06" (5.23 cm) 1.73" (4.4 cm) 1.96" (4.98 cm) 6.81" (17.3 cm) Open-End Bracket 10.54" (26.77 cm) 2.06" (5.23 cm) 5.42" (13.8 cm) 1.5" 1.86" (3.81 cm) (4.72 cm) 3.71" (9.42 cm) 5.57" (14.15 cm) 0.28" (0.71 cm) 1.0" (2.54 cm) Existing Threaded Rod Bracket Kit Shown Alone and Attached to Threaded Rod FGS-0120-X 4.6" (11.68 cm) 5.0" (12.7 cm) Ladder Rack Center Support Bracket Kit FGS " (36.07 cm) Under Floor Support Bracket Kit FGS " (3.81 cm) 2.0" (5.08 cm) 0.38" (0.97 cm) 2.4" (6.1 cm) 5.0" (12.7 cm) 65

69 2x6, 4x4, and 4x6 Systems Support Kits " ( cm) Equipment Rack 1.5" (3.8 cm) 4.0" (10.2 cm).50" (1.3 cm) Cableway Shown for Reference 3/ " (5.1 cm) 4.8" (12.2 cm) 5.1" (13.0 cm) x 3/8 Pan Head Screw 6.75" (17.1 cm) " ( cm) Support Bracket Shown Alone and Attached to 4" FiberGuide FGS /8-11 Threaded Rod Shown for Reference 7.3" (18.54 cm) 3.16" (8.0 cm) 1.53" (3.9 cm) Unistrut Nut Kit FGS " (22.1 cm) Ladder Rack Cantilever Support Bracket Kit FGS " (19.69 cm) New Threaded Rod Bracket Kit Shown for Reference Digital Cableway Bracket Kit Shown Alone and Attached to 4" FiberGuide FGS-0110-X 4.6" (11.68 cm) PNT0 2.5" (6.35 cm) Lock Washer (2) FOR WALL MOUNT Center Support Bracket FGS-2380-X 12.0" (30.48 cm) 1/2" BOLT HOLES Threaded Rod THREADED ROD (REF) Top Support C-Bracket PNT0 2.5" (6.35 cm) 6" Trough with Cover Quick Knob Assembly 4" OR 6" TROUGH (REF) QUICK KNOB ASSEMBLY 8.0" (20.32 cm) 6" Trough 8.0" (20.32 cm) 1.0" (2.54 cm) Top Support Low-Profile C-Bracket 66

70 4x12 System Support Kits 2" (5.08 cm) 16.50" (41.91 cm) 1.25" (3.18 cm) Split Nut Bracket Clip 12" FiberGuide Bottom Bracket 1.25" (3.18 cm) 1.25" (3.18 cm) Threaded Rod Ref Cantilever Bracket 16.50" (41.91 cm) T-Bolt New Threaded Rod Bracket Kit (Shown alone and attached to Threaded Rod) FGS-0610-X Top Support Threaded Rod C-Bracket Kit (Shown attached to 4x12 Straight Section) FGS-0616-X Lock Washer 10" (25.4 cm) 12" (30.48 cm) 11.25" (28.58 cm) 8.5" (21.59 cm) 12" FiberGuide Mounting Nut 15" (38.10 cm) 4.54" (11.53 cm) T-Bolt Assembly Threaded Rod 12" Trough 2.50" (6.35 cm) Center Support Threaded Rod Bracket Kit (Shown attached to 2x12 Straight Section) FGS " (15.24 cm) 8" (20.32 cm) 2.4" (6.1 cm) Existing Threaded Rod Bracket Kit FGS-0120-X 8.5" (21.59 cm) 15" (38.10 cm) 11.25" (28.58 cm) Ladder Rack Center Support Bracket FGS-0610-x 0.38" (0.97 cm) 1.5" (3.81 cm) 12" Trough Top Support Low Profile Threaded Rod C-Bracket Kit (Shown attached to 4x12 Straight Section) FGS-1216-X 16.0" (40.64 cm) 18.0" (45.72 cm) 2.0" (5.08 cm) Trapeze Bracket FGS-0610-x 67

71 Plenum FiberGuide System System Description ADC KRONE s Plenum FiberGuide system is a fibre cable raceway system that protects optical fibres, routed beneath raised computer room floors and above suspended ceilings. These physical areas, used to transport environment air, are typically categorized as plenum air spaces by National Electric Code (NEC) Standards. In general, materials used in these spaces must be non-flammable and must not emit appreciable amounts of smoke or toxic gases when exposed to heat or flame. Fibre Distribution Devices Dropped Ceiling Made from sturdy aluminum, the Plenum FiberGuide system protects optical fibres by physically separating them from copper communications cable, power cable, ground cables, heating/ventilating ducts, water pipes and many other obstructions commonly encountered in plenum air spaces. New Plenum FiberGuide Express Exits allow jumpers to be permanently or temporarily routed to the fibre optic terminal (FOT) equipment or fibre frames. No cutting is required because knockout sections can be punched out as necessary. As seen in Figure 1, the Plenum FiberGuide system can be used above a dropped ceiling as well as below a raised computer floor. Figure 2 details a layout below a computer floor. This illustration shows a plenum FiberGuide system featuring new Express Exits. Fibre Optic Equipment Figure 1 Raised Floor All plenum components, including mounting hardware for mounting the FiberGuide system to the raised floor struts, are available in the Plenum FiberGuide product line. Figure 2 68

72 Plenum FiberGuide System System Description Straight sections: U-shaped troughs that provide a protective pathway for optical fibres. Straight sections are usually installed horizontally but may also be installed vertically when a system is mounted on multiple levels. Straight sections are six feet in length, and covers are also available. The covers snap into place but can be easily removed for fibre installation. New Express Exits : The Plenum FiberGuide Express Exit system allows jumpers to be routed in and out of the system with ease. Express Exits are secured to the sidewall of a FiberGuide straight section where needed. No cutting is required because knockout sections allow for quick and easy deployment. Fittings: Elbows, tees, crosses, trumpet flares and conversions. The fittings are used for changing direction, converting from one size system to another, adding branch segments and routing the fibres in and out of the system. Like the straight sections, snap-on covers are also available for the fittings. Junction kits: Used for aligning and connecting straight sections and fittings. Two components are joined by inserting them into a junction and pushing them together. Support kits: Used to support the FiberGuide system. The short, long, span and diagonal bracket kits are used for supporting straight sections from round or square tubing. Flexible tubing: Used in Plenum FiberGuide systems when the exact layout of the equipment drop locations is unknown or when frequent equipment relocations are expected. The flexible tubing is two inches in diameter and attaches to the end of a straight section with an adapter. When the equipment configuration is known, the flexible tubing is routed to the exact drop location. Other flexible tubing components include splicing couplers, finishing couplers, mounting straps and additional lengths of tubing. Both patch cords and IFC cables may be installed in the Plenum FiberGuide system. The required two-inch bend radius for patch cords is maintained at all points within the system. IFC cables require the use of tie-down brackets to maintain the required cable bend radius specified by the cable manufacturer at the various fittings. 4x6 Horizontal Straight Section with Express Exit Cutouts 2x2, 4x6, and 4x12 Junction Kits 2x2 Horizontal Straight Section 4x6 Horizontal Straight Section 4x12 Horizontal Straight Section 69

73 Plenum FiberGuide System Typical Installations In addition to providing physical separation and protection, the Plenum FiberGuide system also provides smooth edges and 2-inch (5.08cm) minimum bend radius protection. The Plenum FiberGuide system can be assembled and installed using common hand tools. Push together assembly simplifies installation in confined areas and also permits system expansion when additional capacity is required. A variety of fittings allow adjustments in routing to avoid obstructions. The various sizes provide flexibility when considering the capacity required versus the space available. Optional Covers for Straight Sections and Fittings 4x6 Horizontal T Optional Covers for Straight Sections and Fittings 4x6 Horizontal T 2x2 to 4x6 Conversion 2x2 3-Sided Trumpet Flare 2x2 to 4x6 Conversion 4x6 90 Horizontal Elbow 2x2 90 Down Elbow 2x2 Straight Section Overhead Installation 2x2 Straight Section 4x6 90 Horizontal Elbow 2x2 90 Up Elbow 4x6 45 Down Elbow 4x6 45 Down Elbow 4x6 45 Up Elbow 4x6 45 Up Elbow 2x2 4-Sided Trumpet Flare 4x6 Straight Section 4x6 Straight Section Under Floor Installation 70

74 Plenum FiberGuide System Recommended Patch Cord Densities Recommended capacity takes into consideration random jumper placement into the FiberGuide system. Trough capacity refers to the maximum number of fibre jumpers in a given cross-section of a FiberGuide installation. Recommended Density Single Patch Cords 1.7mm 2.0mm 3.0mm Recommended Patch Cord Density (per in 2 ) Trough Pile-up 2-inch 3-inch 4-inch 2x2 FiberGuide System 1.7mm 2.0mm 3.0mm Using Lab Manual Set-ups Pile-up beyond 2 inches is not recommended Maximum Density 4x6 FiberGuide System 1.7mm 2.0mm 3.0mm mm 2.0mm 3.0mm Patch Cords Patch Cords Patch Cords Maximum Patch Cord Density (per in 2 ) Trough Pile-up 2-inch 3-inch 4-inch 2x2 FiberGuide System 1.7mm 2.0mm 3.0mm Using GR-449-CORE Bellcore Formula 4x6 FiberGuide System 1.7mm 2.0mm 3.0mm x12 FiberGuide System 1.7mm 2.0mm 3.0mm x12 FiberGuide System 1.7mm 2.0mm 3.0mm

75 Plenum FiberGuide System Plenum Express Exit System ADC KRONE introduces its new Plenum FiberGuide Express Exit system, which accommodates a wide range of raceway environments and applications, ensuring greater speed of deployment. Knockout areas are placed every 24 inches on straight sections. By simply punching out one of these areas, the Express Exit can be secured directly to the sidewall allowing drops to be inserted quickly and easily. No cutting is required. Positioning a drop with the Plenum Express Exit family greatly simplifies installation, protecting the integrity of fibres already present in the raceway, and increases the flexibility of the entire plenum raceway system. All Plenum Express Exits guarantee two-inch minimum bend radius protection. Ordering Information Description 6-Inch Plenum Express Exit Straight Section With Express Exit cutouts placed every 24" Plenum Express Exit 2" Square For rigid drops 90 Up Elbow and Trumpet Flare are NOT included. See page X for more information on these accessories. 12-Inch Plenum Express Exit Straight Section Plenum Blank Cover Plenum FiberGuide Express Exit Straight Section PFGF-PSHS-KT Catalogue Number PFGF-PSHS-KT PFGF-PSEE-B/C PFGF-PSHS-KT-F PFGF-PSEE-BLK Plenum FiberGuide Express Exit 2" Square PFGF-PSEE-B/C Plenum FiberGuide Blank Cover PFGF-PSEE-BLK 72

76 Plenum FiberGuide System Express Exit Family 10.25" (26.0cm) 6.5" (16.51cm) 24.00" (60.96cm) 2.28" (5.79cm) 1.25" (3.18cm) 3.50" (8.89cm) 3.50" (8.89cm) 6-Inch Plenum Express Exit Straight Section PFGF-PSHS-KT 12.0" (30.48cm) 1.99" (5.05cm) Plenum Express Exit 2" Square PFGF-PSEE-B/C 12.0" (30.48cm) Plenum Blank Cover PFGF-PSEE-BLK 1.6" (4.12cm) 6.8" (15.0cm) 6.00" (15.24cm) 73

77 Plenum FiberGuide System 2x2 System (2"H x 2"W) The 2x2 Plenum FiberGuide system interfaces with ADC KRONE s standard 2x2 FiberGuide system and requires no special conversion piece. Ordering Information Catalogue Number Number Description Fitting Snap-on Cover of Junctions Straight Section 2x2 straight section length: 6' PFGF-PSHS-C PFGC-PSHS-C Fittings 2x2 horizontal T PFGF-PHRT-C PFGC-PHRT-C 3 2x2 horizontal cross PFGF-PHXP-C PFGC-PHXP-C 4 2x2 90 degree horizontal elbow PFGF-PH9E-C PFGC-PH9E-C 2 2x2 45 degree horizontal elbow PFGF-PH4E-C PFGC-PH4E-C 2 2x2 90 degree up elbow PFGF-PUPE-C PFGC-PUPE-C 2 2x2 90 degree down elbow PFGF-PDNE-C PFGC-PDNE-C 2 2x2 45 degree up elbow PFGF-PU4E-C PFGC-PU4E-C 2 2x2 45 degree down elbow PFGF-PD4E-C PFGC-PD4E-C 2 Trumpet Flares 2x2 trumpet flare 3 sided PFGF-PTRM-C 2x2 trumpet flare 4 sided PFGF-PFPT-C Conversions 2x2 plenum to 4x6 plenum conversion PFGF-PDSA-C/B PFGC-PDSA-C/B (1) 2x2 (1) 4x6 2x2 plenum to 4x12 plenum conversion PFGF-PDSA-C/F PFGC-PDSA-C/F (1) 2x2 (1) 4x12 Junctions 2x2 junction PFGF-PJWR-C 2x2 end cap Includes 2x2 junction PFGF-PMEC-C 2.0" (5.08 cm) 72.0" ( cm) 2.0" (5.08 cm) 2x2 Straight section PFGF-PSHS-C Cover: PFGC-PSHS-C 2.0" (5.08 cm) 8.87" (22.53 cm) 2.0" ( (5.08 cm) 5.44" (13.82 cm) 2x2 Horizontal T PFGF-PHRT-C Cover: PFGC-PHRT-C 2.0" (5.08 cm) 2.0" (5.08 cm) 8.88" (22.56 cm) 8.88" (22.56 cm) 2x2 Horizontal Cross PFGF-PHXP-C Cover: PFGC-PHXP-C 74

78 Plenum FiberGuide System 2x2 System (2"H x 2"W) 5.5" (13.97 cm) 5.5" (13.97 cm) 2.0" (5.08 cm) 2.0" (5.08 cm) 3.63" (9.22 cm) 5.35" (13.59 cm) 2.0" (5.08 cm) ( 5.5" (13.97 cm) 2.0" (5.08 cm) 2.0" (5.08 cm) 5.5" (13.97 cm) 2x2 90 Horizontal Elbow PFGF-PH9E-C Cover: PFGC-PH9E-C 2x2 45 Horizontal Elbow PFGF-PH4E-C Cover: PFGC-PH4E-C 2x2 90 Up Elbow PFGF-PUPE-C Cover: PFGC-PUPE-C 5.47" (13.89 cm) 2.0" (5.08 cm) 5.47" (13.89 cm) 2.0" (5.08 cm) 2x2 90 Down Elbow PFGF-PDNE-C Cover: PFGC-PDNE-C 4.61" (11.71 cm) 7.36" 3.6" (18.69 cm) (9.14 cm) ( 2x2 3 Sided Trumpet Flare PFGF-PTRM-C 2.0" (5.08 cm) 2.0" (5.08 cm) 12.0" (30.48 cm) 4.0" (10.16 cm) 7.0" (17.78 cm) 2x2 to 4x12 Conversion PFGF-PDSA-C/F Cover: PFGC-PDSA-C/F 3.6" (9.14 cm) 2.08" (5.28 cm) 3.8" (9.65 cm) 2.0" (5.08 cm) 2.0" (5.08 cm) 5.4" (13.72 cm) 2x2 45 Up Elbow PFGF-PU4E-C Cover: PFGC-PU4E-C 2.5" (6.35 cm) 7.36" (18.69 cm) 7.36" (18.69 cm) 2x2 4 Sided Trumpet Flare PFGF-PFPT-C 2x2 Junction PFGF-PJWR-C 2.2" (5.59 cm) 2.0" (5.08 cm) 2.0" (5.08 cm) 2.0" (5.08 cm) 2.0" (5.08 cm) 1.24" (3.15 cm) 2.11" (5.36 cm) 5.75" (14.61 cm) 2.22" (5.64 cm) 3.63" (9.22 cm) 2x2 45 Down Elbow PFGF-PD4E-C Cover: PFGC-PD4E-C 6.0" (15.24 cm) 6.46" (16.41 cm) 2x2 End Cap PFGF-PMEC-C 4.0" (10.16 cm) 2x2 to 4x6 Conversion PFGF-PDSA-C/B Cover: PFGC-PDSA-C/B 75

79 Plenum FiberGuide System 4x6 System (4"H x 6"W) Ordering Information Catalogue Number Number Description Fitting Snap-on Cover of Junctions Straight Section 4x6 straight section 6' long PFGF-PSHS-B PFGC-PSHS-B Fittings 4x6 horizontal T PFGF-PHRT-B PFGC-PHRT-B 3 4x6 horizontal cross PFGF-PHXP-B PFGC-PHXP-B 4 4x6 90º horizontal elbow PFGF-PH9E-B PFGC-PH9E-B 2 4x6 45º horizontal elbow PFGF-PH4E-B PFGC-PH4E-B 2 4x6 90º up elbow PFGF-PUPE-B PFGC-PUPE-B 2 4x6 90º down elbow PFGF-PDNE-B PFGC-PDNE-B 2 4x6 45º up elbow PFGF-PU4E-B PFGC-PU4E-B 2 4x6 45º down elbow PFGF-PD4E-B PFGC-PD4E-B 2 Trumpet Flares 4x6 trumpet flare 3 sided PFGF-PTRM-B 4x6 trumpet flare 4 sided PFGF-PFPT-B Conversions 4x6 plenum to 4x6 standard conversion PFGF-PPSC-B 1* *One 4x6 plenum junction kit required; 4x6 standard junction is not required 4x6 plenum to 12" plenum conversion PFGF-PDSA-B/F PFGC-PDSA-B/F (1) 4x6, (1) 4x12 Junctions 4x6 junction PFGF-PJWR-B 4x6 end cap includes 4x6 junction PFGF-PMEC-B Note: For more information on Express Exits, see page 72 4x6 Straight Section PFGF-PSHS-B Cover: PFGC-PSHS-B 4x6 Horizontal T PFGF-PHRT-B Cover: PFGC-PHRT-B 4x6 Horizontal Cross PFGF-PHXP-B Cover: PFGC-PHXP-B 76

80 Plenum FiberGuide System 4x6 System (4"H x 6"W) 4x6 90 Horizontal Elbow PFGF-PH9E-B Cover: PFGC-PH9E-B 4x6 90 Down Elbow PFGF-PDNE-B Cover: PFGC-PDNE-B 4x6 3 Sided Trumpet Flare PFGF-PTRM-B 4x6 to 4x12 Conversion PFGF-PDSA-B/F Cover: PFGC-PDSA-B/F 4x6 45 Horizontal Elbow PFGF-PH4E-B Cover: PFGC-PH4E-B 4x6 45 Up Elbow PFGF-PU4E-B Cover: PFGC-PU4E-B 4x6 Sided Trumpet Flare PFGF-PFPT-B 4x6 Junction PFGF-PJWR-B 1.75" (4.45 cm) 4x6 90 Up Elbow PFGF-PUPE-B Cover: PFGC-PUPE-B 4x6 45 Down Elbow PFGF-PD4E-B Cover: PFGC-PD4E-B 6.0" (15.24 cm) 4x6 Plenum to 4x6 Standard Conversion: PFGF-PPSC-B No Cover 4x6 End Cap PFGF-PMEC-B 4.0" (10.16 cm) 77

81 Plenum FiberGuide System 4x12 System (4"H x 12"W) Ordering Information Catalogue Number Number Description Fitting Snap-on Cover of Junctions Straight Section 4x12 straight section 6' long PFGF-PSHS-F PFGC-PSHS-F Fittings 4x12 horizontal T PFGF-PHRT-F PFGC-PHRT-F 3 4x12 horizontal cross PFGF-PHXP-F PFGC-PHXP-F 4 4x12/4x6 horizontal T PFGF-PHRT-F/B PFGC-PHRT-F/B 2 4x12 90º horizontal elbow PFGF-PH9E-F PFGC-PH9E-F 2 4x12 45º horizontal elbow PFGF-PH4E-F PFGC-PH4E-F 2 4x12 90º up elbow PFGF-PUPE-F PFGC-PUPE-F 2 4x12 90º down elbow PFGF-PDNE-F PFGC-PDNE-F 2 4x12 45º up elbow PFGF-PU4E-F PFGC-PU4E-F 2 4x12 45º down elbow PFGF-PD4E-F PFGC-PD4E-F 2 Trumpet Flares 4x12 trumpet flare 3 sided PFGF-PTRM-F 4x12 trumpet flare 4 sided PFGF-PFPT-F Junctions 4x12 junction PFGF-PJWR-F 4x12 end cap includes 4x12 junction PFGF-PMEC-F 12.0" (30.48 cm) 72.0" ( cm) 4x12 Straight Section PFGF-PSHS-F Cover: PFGC-PSHS-F 4.0" (10.16 cm) 12.0" (30.48 cm) 18.88" (47.96 cm) 4.0" (10.16 cm) 15.44" (38.22 cm) 4x12 Horizontal T PFGF-PHRT-F Cover: PFGC-PHRT-F 18.88" (47.96 cm) 4.0" (10.16 cm) 12.0" (30.48 cm) 4x12 Horizontal Cross PFGF-PHXP-F Cover: PFGC-PHXP-F 18.88" (47.96 cm) 12.0" (30.48 cm) 78

82 Plenum FiberGuide System 4x12 System (4"H x 12"W) 15.95" (40.51 cm) 12.56" (31.9 cm) 14.13" (35.89 cm) 4.0" (10.16 cm 12.87" (32.69 cm) 15.44" (39.22 cm) 12.0" (30.48 cm) 15.44" (39.22 cm) 12.0" (30.48 cm) 13.63" (34.62 cm) 4x12/4x6 Horizontal T PFGF-PHRT-F/B Cover: PFGC-PHRT-F/B 7.46" (18.95 cm) 4.12" (10.46 cm) 7.46" (18.95 cm) 12.51" (31.78 cm) 12.0" (30.48 cm) 4x12 90 Up Elbow PFGF-PUPE-F Cover: PFGC-PUPE-F 12.0" (30.48 cm) 4.0" 6.93" (10.16 cm) (17.6 cm) 4x12 45 Down Elbow PFGF-PD4E-F Cover: PFGC-PD4E-F 4x12 Junction PFGF-PJWR-F 4.0" (10.16 cm) 5.63" (14.3 cm) 2.2" (5.59 cm) 12" 90 Horizontal Elbow PFGF-PH9E-F Cover: PFGC-PH9E-F 4.0" (10.16 cm) 3.6" (9.14 cm) 7.44" (18.9 cm) 1.24" (3.15 cm) 4.11" (10.44 cm) 12.22" (31.04 cm) 7.44" (18.9 cm) 12.0" (30.48 cm) 4x12 90 Down Elbow PFGF-PDNE-F Cover: PFGC-PDNE-F 17.36" (44.1 cm) 6.65" (16.9 cm) 4x12 3 Sided Trumpet Flare PFGF-PTRM-F 4x12 End Cap PFGF-PMEC-F 4x12 45 Horizontal Elbow PFGF-PH4E-F Cover: PFGC-PH4E-F 7.01" (17.81 cm) 3.6" (9.14 cm) 5.8" (14.73 cm) 12.0" (30.48 cm) 4x12 45 Up Elbow PFGF-PU4E-F Cover: PFGC-PU4E-F 17.36" (44.09 cm) 4.0" (10.16 cm) 9.4" (23.88 cm) 4x12 4 Sided Trumpet Flare PFGF-PFPT-F 79

83 Plenum FiberGuide System Accessories (Support Bracket Kits) Ordering Information Description Short bracket kit for use with 2x2 and 4x6 sizes; 8.21" overall length Short bracket kit with square U-bolt for easy access mounting Long bracket kit for use with 2x2, 4x6, and 4x12 sizes; 18.84" overall length Long bracket kit with square U-bolt for easy access mounting Span bracket kit for use with 2x2, 4x6, and 4x12 sizes; spans 24" center to center floor struts Span bracket kit with square U-bolt for easy access mounting Diagonal span bracket kit for use with 2x2, 4x6, and 4x12 sizes; spans diagonally up to 34" between struts Diagonal span bracket kit with square U-bolt for easy access mounting All support bracket kits fit round support pedestals sizes.5" to 1.125". 2.31" (5.87 cm) 2.31" (5.87 cm) 2.31" (5.87 cm) Short Bracket Kit PFGF-SSPT-C/B 8.21" (20.85 cm) Short Bracket Kit with Square U-bolt PFGF-EASSPT-C/B 2.31" (5.87 cm) 8.21" (20.85 cm) 2.31" (5.87 cm) 2.31" (5.87 cm) 18.84" (47.85 cm) 2.31" (5.87 cm) Long Bracket Kit PFGF-LSPT-C/B/F 18.84" (47.85 cm) Long Bracket Kit with Square U-bolt PFGF-EALSPT-C/B/F 2.31" 2.31" 2.31" (5.87 cm) (5.87 cm) 26.13" (5.87 cm) (66.37 cm) Span Bracket Kit PFGF-ESPT-C/B/F SPAN BRACKET KIT 3873-A 26.13" (66.37 cm) Span Bracket Kit with Square U-bolt PFGF-EAESPT-C/B/F 2.31" (5.87 cm) 2.31" (5.87 cm) Catalogue Number PFGF-SSPT-C/B PFGF-EASSPT-C/B PFGF-LSPT-C/B/F PFGF-EALSPT-C/B/F PFGF-ESPT-C/B/F PFGF-EAESPT-C/B/F PFGF-DSPT-C/B/F PFGF-EADSPT-C/B/F 36.07" (91.62 cm) Diagonal Span Bracket Kit PFGF-DSPT-C/B/F DIAGONAL SPAN BRACKET KIT 3874-A 36.07" (91.62 cm) 2.31" (5.87 cm) 2.31" (5.87 cm) Diagonal Span Bracket Kit with Square U-bolt PFGF-EADSPT-C/B/F 80

84 Plenum FiberGuide System Accessories (Flexible Tubing) Plenum metallic 2-inch (5.08cm) inner diameter flexible tubing is available for use in under floor applications where the exact layout of drop locations has not yet been defined, or where frequent changes in equipment location are expected. In future growth applications, the flexible tubing can be installed up front, and coiled under the floor until the exact configuration of equipment is established. The flexible tubing can then be routed to the drop location and fed through the flooring to the final location. Flexible tubing options include a two-hose adapter that can be attached to 6-inch (15.24cm) standard fitting or straight section. The two-hose adapter comes complete with two 5-foot-long (1.53m) flexible hoses, and two end finishing couplers. When longer flexible tube requirements exist, multiple 5-foot-long extension tubes can be spliced into the two hose adapter to reach any length. The extension tubes are 5 feet (1.53m) long, and come with a splice coupler. Additional finishing couplers, mounting straps and splice couplers can be purchased separately. Ordering Information Description One hose adapter, with 5' (1.53m) hoses and finishing couplers For use with 2x2 openings Two hose adapter, with 5' (1.53m) hoses and finishing couplers For use with 4x6 openings Extension tube, 5' (1.53m) long with splice coupler Finishing coupler Mounting strap Splicing coupler Flexible tubing, 2" (5.08cm) inner diameter (X = length in feet: 5, 15, 35, 75, 110, 150) Extension Tube PFGF-HEXT Finishing Coupler PFGF-HFIN Splicing Coupler PFGF-HSPL Catalogue Number PFGF-KT03-C PFGF-KT03-B PFGF-HEXT PFGF-HFIN PFGF-HMST PFGF-HSPL PFGF-MIDY-XF Mounting Strap PFGF-HMST Two Hose Adapter PFGF-KT03-B One Hose Adapter PFGF-KT03-C 81

FiberGuide Fiber Management Systems

FiberGuide Fiber Management Systems FiberGuide Fiber Management Systems 2018 Edition 2 FiberGuide Fiber Management Systems 2018 Edition Contents Introduction...1 FiberGuide Fiber Management Systems...1 Examples of FiberGuide Integration...2

More information

WAVETRAX USER MANUAL

WAVETRAX USER MANUAL WAVETRAX USER MANUAL 107719-2A0 WAVETRAX User Manual Document Number 107719-1A0 Copyright 2001, Telect, Inc., All Rights Reserved. Telect and Connecting the Future are registered trademarks of Telect,

More information

Put the Power in Your Hands

Put the Power in Your Hands Put the Power in Your Hands StarlineTrack Busway... STARLINE Track Busway is quickly becoming the industry standard for power distribution systems. Introduced in 1988, this innovative system is a modular,

More information

EZTray. Cable Management Made Easy

EZTray. Cable Management Made Easy EZTray Cable Management Made Easy PRESENTATION Introduction:.................................. 3 EZ Tray: The Tray That Saves You Time!.............. 4-5 EZ Tray: The Innovative Cable Management Solution....

More information

Fiber Raceway System. Selection Guide

Fiber Raceway System. Selection Guide Fiber Raceway System Selection Guide Fiber Cable Management Made Easy Route, protect, and store fiber cabling with Leviton s Fiber Raceway System. The easy to design, easy to configure, easy to install

More information

BESTEEL 170 SERIES CURTAIN TRACKS

BESTEEL 170 SERIES CURTAIN TRACKS BESTEEL 170 SERIES CURTAIN TRACKS BL = Black Finish 2XX Series Track Systems have a black finish. Parts Included 170 (270) 170 BESTEEL CWANA code CORD OPERATED/MOTORIZED 171 (271) 171-R (271-R) 260 172

More information

Conduit and Wire. Wire and Cable Whips. Bus Duct, Cable Trays, Overhead or Under Floor Raceways, Strut or Channel Systems

Conduit and Wire. Wire and Cable Whips. Bus Duct, Cable Trays, Overhead or Under Floor Raceways, Strut or Channel Systems Conduit and Wire Must be scrapped whenever reconfiguration of the electrical layout is needed. Many runs may be needed for applications with a high volume or high density of electrical loads. It is labor

More information

Flame-retardant PVC offers the protection you need.

Flame-retardant PVC offers the protection you need. Solid wall wiring duct Flame-retardant PVC offers the protection you need. Solid wall duct PVC Engineered to restrict wire access Constructed of flame-retardant PVC Improved flush sidewall and cover style

More information

XT SERIES COLLAPSIBLE BULK CONTAINERS. Profit From Your Material Handling

XT SERIES COLLAPSIBLE BULK CONTAINERS. Profit From Your Material Handling Profit From Your Material Handling Increase Productivity Better Ergonomics Maximize Space Usage Lower Transport Costs Superior Product Protection Improve Handling Efficiency New! XT SERIES COLLAPSIBLE

More information

Fiber Splice Panel Rack Mount User Manual

Fiber Splice Panel Rack Mount User Manual Fiber Splice Panel Rack Mount User Manual Content Page INTRODUCTION... 1 Revision History... 1 List of Changes... 1 Trademark Information... 2 Admonishments... 2 1. DESCRIPTION... 2 A. Product Definition

More information

Motive Cable Management System

Motive Cable Management System Protecting your technology investment. Motive Cable Management System Motive Vertical is a highly configurable and advanced cable management solution that provides unlimited adjustment anywhere within

More information

BESTEEL Model 170 Curtain Tracks BESTEEL Model 171-N Curtain Tracks BESTEEL Model 171-R Curtain Tracks

BESTEEL Model 170 Curtain Tracks BESTEEL Model 171-N Curtain Tracks BESTEEL Model 171-R Curtain Tracks BESTEEL Model 170 Curtain Tracks - Curtain tracks shall be of 14 gauge galvanized steel construction entirely enclosed except for slot in bottom, each half to be in one continuous piece except where splicing

More information

ONTRAC WIRE MESH CABLE TRAY SYSTEM

ONTRAC WIRE MESH CABLE TRAY SYSTEM P R O D U C T D ATA S H E E T ONTRAC WIRE MESH CABLE TRAY SYSTEM K E Y F E AT U R E S Available in two styles: Shaped and Standard Tray Easy to use pathway solution that supports large quantities of network

More information

System description/overview/kit overview...5 Assembly procedures...7. Channels Solid channel with cover...10 Slotted channel with cover...

System description/overview/kit overview...5 Assembly procedures...7. Channels Solid channel with cover...10 Slotted channel with cover... Introduction System description/overview/kit overview...5 ssembly procedures...7 hannels Solid channel with cover...10 Slotted channel with cover...10 Fittings hannel splice...12 Fitting splice...12 Horizontal

More information

Section K. Cabtray - Cable Management System

Section K. Cabtray - Cable Management System Section K Cabtray - Cable Management System Introducing Cabtray Cabtray Standard Range Cabtray Load Carrying Capacity mm High Tray Joiner Kit K5 50 mm High Tray Joiner Kit K6 Tray Joiner Kit Trapeze Support

More information

HelaGuard. Non-Metallic Conduit & Fittings

HelaGuard. Non-Metallic Conduit & Fittings HelaGuard Non-Metallic Conduit & Fittings HelaGuard Non-Metallic Conduit Systems Page HelaGuard Overview 3 Conduit Application Overview 4 Mounting & Removing HelaGuard Non-Metallic Fittings 5 HelaGuard

More information

More space for efficient electrical panel building

More space for efficient electrical panel building More space for efficient electrical panel building Cable management solutions made by HellermannTyton Speed up your projects. With our cable management solutions. Development and production expertise Time

More information

One Circuit Trac System TRAC SECTION, JOINERS & FEEDS T Series

One Circuit Trac System TRAC SECTION, JOINERS & FEEDS T Series Project: Fixture Type: Location: Contact/Phone: PRODUCT DESCRIPTION DIMENSIONS Low-Profile, single-circuit trac sections for surface or pendant mounting. I-beam cross section provides added strength and

More information

PROJECTOR ACCESSORIES

PROJECTOR ACCESSORIES PROJECTOR *To order select accessories in white or silver, simply add a W for white or an S for silver to the end of the part number. CEILING PLATES CMA100 8" (203 mm) CEILING PLATE WITH ADJUSTABLE 1-1/2"

More information

Series 577. Vertical Flow Softwall Portable Cleanroom. Series 577 Vertical Flow Softwall Portable Cleanroom

Series 577. Vertical Flow Softwall Portable Cleanroom. Series 577 Vertical Flow Softwall Portable Cleanroom Series 577 Vertical Flow Softwall Portable Cleanroom s o l u t i o n s The Series 577 softwall portable clean rooms are a cost-effective method of providing quality particulate control enclosures. The

More information

Cable Management Solutions. HelaGuard. Non-Metallic Conduits and Fittings

Cable Management Solutions. HelaGuard. Non-Metallic Conduits and Fittings Cable Management Solutions HelaGuard Non-Metallic Conduits and Fittings Table of Contents Page HelaGuard Overview 4 Conduit Application Overview 6 Mounting & Removing HelaGuard Non-Metallic Fittings 7

More information

LB - LIGHTING BUSWAY 25-40A

LB - LIGHTING BUSWAY 25-40A 16 LB - LIGHTING BUSWAY 25-40A LIGHTING BUSWAY SECTION CONTENTS 18 General features 24 Trunking components: 2 and 4 conductors elements 28 Trunking components: 6 conductors elements 30 Plugs 33 Fixing

More information

Chapter 3. Installing Equipment

Chapter 3. Installing Equipment TERAFRAME USER S MANUAL 57 Chapter 3. Installing Equipment 3.1 EQUIPMENT MOUNTING RAILS Four vertical equipment mounting rails are installed at the factory, two in the front of the cabinet and two in the

More information

One Circuit Trac System TRAC SECTION, JOINERS & FEEDS T Series

One Circuit Trac System TRAC SECTION, JOINERS & FEEDS T Series Project: Fixture Type: Location: Contact/Phone: PRODUCT DESCRIPTION DIMENSIONS Low-Profile, single-circuit trac sections for surface or pendant mounting. I-beam cross section provides added strength and

More information

1.866.TRY.GLCC WeRackYourWorld.com

1.866.TRY.GLCC WeRackYourWorld.com 1.866.TRY.GLCC WeRackYourWorld.com reat Lakes Cable Management Solutions provide data center managers with a number of enclosure and rack options to support large networks of switches, servers, and patch

More information

ELECTRICAL SOLUTIONS

ELECTRICAL SOLUTIONS Ties Type FL Flexible Material: Flexible Polypropylene UL Recognized continuous use temperature: 149 F (65 C) H W UL 94 flammability rating of V-2 Factory applied adhesive tape provided for easy mounting

More information

accqpulse Velocity Profiler Sensor Installation Guide

accqpulse Velocity Profiler Sensor Installation Guide accqpulse Velocity Profiler Sensor Installation Guide Instruction Sheet #69-7403-012 Released May 2016 Overview This instruction guide is for the installation of the accqpulse shallow water and deep water

More information

Wiring Duct T1 Series - Slotted

Wiring Duct T1 Series - Slotted Duct T1 Series - Slotted UL file E123572 T1 Series Gray Open Slot Rigid PVC (including cover) Catalog Standard Carton Package Quantity Price Catalog Single Piece Pkg Package Quantity Price T1-0506G 20

More information

Innovations. Supplement to Eldon Product Catalogue

Innovations. Supplement to Eldon Product Catalogue Innovations Supplement to Eldon Product Catalogue Table of contents Quick fixation baying brackets... 4 Mounting plate brackets... 6 Profile system... 8 Side panel improvement... 10 Easy fixation with

More information

Plastic Diffusers & Grilles

Plastic Diffusers & Grilles Diffusers & Grilles No rust, no corrosion Won t fade or yellow Scratches don t show No painting or repainting Won t bend Mildew resistant Consistent smooth finish Indistinguishable from metal when installed

More information

Metal Raceway Systems. tomorrow. Wiremold Metal Raceway. Innovative from Day One.

Metal Raceway Systems. tomorrow. Wiremold Metal Raceway. Innovative from Day One. Metal Raceway Systems tomorrow 1916 Wiremold Metal Raceway. Innovative from Day One. Wiremold metal raceway has been defining the category for close to a century. Offering the broadest, most innovative

More information

Alpha System ADAPTABLE KEWAUNEE LABORATORY FURNITURE. encouraging new discovery

Alpha System ADAPTABLE KEWAUNEE LABORATORY FURNITURE. encouraging new discovery Alpha System ADAPTABLE LABORATORY FURNITURE KEWAUNEE encouraging new discovery Alpha 6 partition modules with Kemresin worktops. Minneapolis, Minnesota Alpha 6 partition modules with Alpha overhead service

More information

Racks M A N A G E M E N T. Premise Connectivity Systems. A N DCable. Racks and Cable Management

Racks M A N A G E M E N T. Premise Connectivity Systems. A N DCable. Racks and Cable Management Premise Connectivity Systems A N DCable Racks M A N A G E M E N T w w w. s i g n a m a x. c o m Racks and Cable Equipment Racks Vertical Cable Management for Equipment Racks Equipment Shelves Hinged Wall-Mount

More information

Generator Fire Safety: Generator assemblies should be located outside the building.

Generator Fire Safety: Generator assemblies should be located outside the building. SECTION 33 70 00 - ELECTRICAL DISTRIBUTION PACKAGED GENERATOR ASSEMBLIES Generator Fire Safety: Generator assemblies should be located outside the building. All fuel piping from the outside of the building

More information

MIGHTY MO CABLE MANAGEMENT SYSTEM

MIGHTY MO CABLE MANAGEMENT SYSTEM MIGHTY MO CABLE MANAGEMENT SYSTEM ONE SIZE FITS ALL Mighty Mo Wall Mount Cabinet Mighty Mo 3 Clear Mighty Mo 4-Mation Mighty Mo 3 www.ortronics.com 800-934-5432 (sales) 877-599-5393 MIGHTY MO 3 CABLE MANAGEMENT

More information

SYSTIMAX 360 ipatch G2 High Density Sliding Fiber Shelf Instructions

SYSTIMAX 360 ipatch G2 High Density Sliding Fiber Shelf Instructions Instruction Sheet 860445121 Issue 2, December 2012 SYSTIMAX Solutions SYSTIMAX 360 ipatch G2 High Density Sliding Fiber Shelf Instructions General The SYSTIMAX 360 ipatch G2 High Density Sliding Fiber

More information

Conveyors 12. slide strips roller Conveyors roller elements Conveyor rollers Chain Transfer

Conveyors 12. slide strips roller Conveyors roller elements Conveyor rollers Chain Transfer Conveyors slide strips roller Conveyors roller elements Conveyor rollers Chain Transfer Application example conveyors Transport solutions and goods provision 1 2 3 4 5 6 7 8 362 9 1 slide strips Low-wear

More information

Juno Trac-Master Trac Lighting Systems. Comprehensive line and low voltage track systems

Juno Trac-Master Trac Lighting Systems. Comprehensive line and low voltage track systems Juno Trac-Master Trac Lighting Systems Comprehensive line and low voltage track systems Juno Trac-Master System Safe and simple installation is what you can expect from Juno one-circuit and two-circuit

More information

LSW Connector Module User Manual

LSW Connector Module User Manual LSW Connector Module User Manual Content Page INTRODUCTION............................................................................. 2 Revision History........................................................................

More information

Installation Instructions: HYPERION R-Lite SYSTEM

Installation Instructions: HYPERION R-Lite SYSTEM Installation Instructions: HYPERION R-Lite SYSTEM READ THIS MANUAL BEFORE PROCEEDING WITH THE INSTALLATION. FAILURE TO FOLLOW THE INSTALLATION INSTRUCTIONS WILL VOID YOUR WARRANTY! INSTALLATION TIPS Read

More information

CITADEL VERY DURABLE - EASY TO CLEAN AND SERVICE - STAINLESS HARDWARE - IMPACT RESISTANT LENSES

CITADEL VERY DURABLE - EASY TO CLEAN AND SERVICE - STAINLESS HARDWARE - IMPACT RESISTANT LENSES 4s CITADEL CT4S LED GASKETED ENCLOSURE VERY DURABLE - EASY TO CLEAN AND SERVICE - STAINLESS HARDWARE - IMPACT RESISTANT LENSES Combination of the Citadel Family of Enclosures in a SMALLER unit for tight

More information

Ty-Duct wiring duct. Product and ordering information. Technical information. Ty-Duct wiring duct 1

Ty-Duct wiring duct. Product and ordering information. Technical information. Ty-Duct wiring duct 1 TY-DUCT WIRING DUCT Ty-Duct wiring duct Product and ordering information A Technical information Ty-Duct wiring duct 1 Overview The versatile configurations you need for routing and concealing wiring.

More information

SW1 Swivel 1U Patch Panel

SW1 Swivel 1U Patch Panel SW1 Swivel 1U Patch Panel An innovative 1U, 19 and 23 rack mountable swivel patch panel, designed to manage up to 48 fibres. It is compatible with LC, SC and FC adaptor types. This panel can swivel up

More information

Two Circuit Trac System TRAC SECTION, JOINERS & FEEDS

Two Circuit Trac System TRAC SECTION, JOINERS & FEEDS Project: Fixture Type: Location: Contact/Phone: PRODUCT DESCRIPTION DIMENSIONS Low profile, two-circuit trac sections for surface or pendant mounting. Provides two separate 20-amp circuits from a single

More information

We ve doubled our technology.

We ve doubled our technology. U N I V E R S A L We ve doubled our technology. The modularity of the new RollEase Universal 5 Fascia System TM accommodates one or two roller shades and offers a variety of different configurations. Enjoy

More information

SURFACE TRACK (120/250V) SPECIFICATIONS

SURFACE TRACK (120/250V) SPECIFICATIONS SURFACE TRACK (120/250V) SPECIFICATIONS GENERAL Lighting Track shall allow fixtures to be located anywhere along the track length. Fixtures shall be easily focused, switched, dimmed, accessorized and removed

More information

FIBER-DUCT Routing System NEC Compliant/UL Listed

FIBER-DUCT Routing System NEC Compliant/UL Listed The FIBER-DUCT Routing System provides a complete solution for routing and protecting your fiber optic cables. This system can also be used for Category 5, UTP, ScTP, and Coax cabling applications as well.

More information

FIST-GMS2. FIST Generic Mixed Shelf MK2. Contents. 1 Introduction. 5 Termination of the pigtails. 2 General. 6 Splicing + fiber storage

FIST-GMS2. FIST Generic Mixed Shelf MK2. Contents. 1 Introduction. 5 Termination of the pigtails. 2 General. 6 Splicing + fiber storage FIST-GMS2 I N S T A L L A T I O N I N S T R U C T I O N FIST Generic Mixed Shelf MK2 Contents 1 Introduction 2 General 2.1 Kit content 2.2 Tools 2.3 Optional extra s 3 Installation of the shelf 3.1 Mounting

More information

Reflection. Aluminium Sectional Doors

Reflection. Aluminium Sectional Doors Reflection Aluminium Sectional Doors The Reflection aluminium sectional door features a chic round edge aluminium extrusion that can be clad with either glass or acrylic. Featuring a strong, sleek and

More information

Material Handling Products for Industrial and Process Applications

Material Handling Products for Industrial and Process Applications Material Handling Products for Industrial and Process Applications The material matters in material handling The material matters in material handling Contents Nest and Stack Containers...4-5 Stacking

More information

INSTALLATION INSTRUCTIONS

INSTALLATION INSTRUCTIONS 144F TABLE OF CONTENTS GENERAL... 2 SPECIFICATIONS... 2 PACKAGE CONTENTS... 2 PACKAGE CONTENTS: ACCESSORIES... 3 REQUIRED TOOLS... 3 ADD-ON COMPONENTS... 3 CABINET MOUNTING WALL MOUNT BRACKET ATTACHMENT...

More information

TS IT Server/Network Enclosures

TS IT Server/Network Enclosures TS IT Server/Network Enclosures www.rittal.us Rittal TS IT Enclosures Introducing simplicity Data Center Enclosures Ready to Ship Easy to Order Number Height Width Depth Color Sidewalls TS42U2442BSW 42U

More information

WIRE BASKET TRAY CANADIAN ELECTRICAL RACEWAYS INC.

WIRE BASKET TRAY CANADIAN ELECTRICAL RACEWAYS INC. CANADIAN ELECTRICAL RACEWAYS INC. WIRE BASKET TRAY Made of heavy-gauge zinc plated wire mesh, CER basket tray is ideal for your commercial or industrial cable management project. A full range of cable

More information

Ortronics. Mighty Mo. GX Cabinets. Designed to Perform, Configured to Fit

Ortronics. Mighty Mo. GX Cabinets. Designed to Perform, Configured to Fit Ortronics Mighty Mo GX Cabinets Designed to Perform, Configured to Fit Mighty Mo GX Configured By You, Made By Legrand Ortronics 2 Ortronics (adj.) ef fi cient Performing or functioning in the best possible

More information

CATALOG. Ty-Duct Wiring duct

CATALOG. Ty-Duct Wiring duct CATALOG Ty-Duct Wiring duct Thomas & Betts is now ABB Installation Products, but our long legacy of quality products and innovation remains the same. From connectors that help wire buildings on Earth to

More information

Installation, Operation & Maintenance

Installation, Operation & Maintenance OTO Installation, Operation & Maintenance 1 Installation, Operation & Maintenance OTO Curved Slot Swirl Diffusers Last Revision 2016-08 H V A C TM Architecture, Comfort, Efficiency OTO Installation, Operation

More information

Austin. Aluminium Sectional Doors

Austin. Aluminium Sectional Doors Austin Aluminium Sectional Doors The Austin aluminium sectional door has an elegant and timeless design ideal for contemporary style homes and commercial applications such as showrooms, workshops or small

More information

SW1 Swivel 3U Patch Panel

SW1 Swivel 3U Patch Panel SW1 Swivel 3U Patch Panel An innovative 3U, 19 and 23 rack mountable swivel patch panel, designed to manage up to 144 fibres. It is compatible with LC, SC and FC adaptor types. This panel can swivel up

More information

Installation Instructions Table of Contents

Installation Instructions Table of Contents Installation Instructions Table of Contents Pre- Installation of Garage Storage Lift 2 Layout the Garage Storage Lift 3 Installing the strut Channels 3 Install the Drive Assembly 5 Install the Drive Shaft

More information

pr1me FX LINEAR AMBIENT LIGHTING

pr1me FX LINEAR AMBIENT LIGHTING PROJECT: TYPE: pr1me FX APPLICATION Delivering the first layer of ambient light from a cove fixture. Patented system allows over 85% of the light to exit the cove to deliver better quality light than recessed

More information

YOUR FULL LINE SOURCE FOR PVC ELECTRICAL PRODUCT

YOUR FULL LINE SOURCE FOR PVC ELECTRICAL PRODUCT CANTEX INC. 301 Commerce Ste 2700 Fort Worth, Texas 76102 817-215-7000 Fax: 817-215-7001 Conduit Fittings & Accessories Directional Drilling Conduit Utility Duct Telephone Duct Residential Boxes YOUR FULL

More information

TRAC-LITES One Circuit Trac System TRAC SECTIONS & SYSTEM COMPONENTS R Series

TRAC-LITES One Circuit Trac System TRAC SECTIONS & SYSTEM COMPONENTS R Series Project: Fixture Type: Location: Contact/Phone: PRODUCT DESCRIPTION DIMENSIONS Reduced-profile, single-circuit trac sections for surface or pendant mounting. Compatible with a full range of feed, connector

More information

Table of contents. 1. Overview Product ordering and information Appendix Wiring duct styles 4. 1.

Table of contents. 1. Overview Product ordering and information Appendix Wiring duct styles 4. 1. Ty-Duct Wiring Duct 1 Table of contents 1. Overview 2 1.1 Wiring duct styles 4 1.2 How to order 5 2. Product ordering and information 7 2.1 Solid wall wiring duct 8 2.2 Wide slot wiring duct 10 2.3 Narrow

More information

LGX Frame Fiber Management System

LGX Frame Fiber Management System Page 1 LGX Fiber Optic Distributing Frame Suited for High-Density Applications Today, more than ever, your network must be able to support a growing number of fiber applications. Are your fiber optic circuits

More information

Fitting Room Systems & Mirror Kits

Fitting Room Systems & Mirror Kits Fitting Room Systems & Mirror Kits Stylmark offers sturdy, high-quality fitting room systems designed to fit together easily and quickly allowing for rapid field installation. With the flexibility of our

More information

Fiber Raceway System. Selection Guide

Fiber Raceway System. Selection Guide Fiber Raceway System Selection Guide System Design & Selection Pg 4 Components Diagram Pg 8 Ordering Guide Pg 9 2 LEVITON.COM 800.722.2082 Fiber cable management made easy Route, protect, and store fiber

More information

Pipe Cutting and Beveling Clamshells

Pipe Cutting and Beveling Clamshells Pipe Cutting and Beveling Clamshells Who We Are One Company, Total Support, Complete Solutions For more than a century, Hydratight has provided world-class bolted joint solutions and continues to set international

More information

66M C5 4 x 50, Category 5, 66M connecting block clip. 10"H x 3.4"W x 1.25"D

66M C5 4 x 50, Category 5, 66M connecting block clip. 10H x 3.4W x 1.25D 66 BLOCK SYSTEM Suttle s 66 Block system is used in equipment rooms or in remote and intermediate wiring closets to connect voice or data wiring to customer premise equipment. Blocks are molded of flame

More information

FIST-FPS. Front Patching Shelf. Contents. 1 Introduction. 3 Installation of the shelf. 2 General. 1 Introduction

FIST-FPS. Front Patching Shelf. Contents. 1 Introduction. 3 Installation of the shelf. 2 General. 1 Introduction FIST-FPS I N S T A L L A T I O N I N S T R U C T I O N Front Patching Shelf Contents 1 Introduction 2 General 2.1 Kit content 2.2 Tools 3 Installation of the shelf 3.1 Side cable termination directly on

More information

Mirror Kits and Assemblies

Mirror Kits and Assemblies Mirror Kits and Assemblies Stylmark offers sturdy, high-quality fitting room systems designed to fit together easily and quickly allowing for rapid field installation. With the flexibility of our post-andpanel

More information

Material Handling Products for Industrial and Process Applications

Material Handling Products for Industrial and Process Applications Material Handling Products for Industrial and Process pplications To learn more about MFG Tray Material Handling Products or to request a quote, please call (814) 683-4500 or (800) 458-6050 6175 Route

More information

The Tracking Magnet Recessed High-tech LED lighting system for interior architecture

The Tracking Magnet Recessed High-tech LED lighting system for interior architecture Description The Tracking Magnet system is creative, flexible, reliable and precise. Accent fixtures can be rapidly exchanged and repositioned without tools using the magic of magnets. A variety of accent

More information

Estimated Cable Fill Width in (mm) in 2 mm 2.30 OD. Cable Fill Area

Estimated Cable Fill Width in (mm) in 2 mm 2.30 OD. Cable Fill Area ONTRAC WIRE MESH CABLE TRAY SYSTEM OnTrac Wire Mesh Cable Tray System CPI s OnTrac Wire Mesh Cable Tray System is an excellent solution for indoor cable pathway applications to create point-to-point pathways

More information

Saxton. Steel Sectional Doors

Saxton. Steel Sectional Doors Saxton Steel Sectional Doors Saxton sectional doors are a custom designed door ideal for most commercial and light industrial applications such as workshops, warehouses and small car parks. Encompassing

More information

2 YEAR WARRANTY HOSE REELS. reelmaster Series heavy duty, quality hose reel engineered to save space

2 YEAR WARRANTY HOSE REELS. reelmaster Series heavy duty, quality hose reel engineered to save space STANDARD CAPacity 1400 Series 1400 Series heavy duty, quality hose reel engineered to save space 1400 Series* Holds up to 40 of 1/2 Hose For 1/4, and 1/2 I.D. Hose Swivel inlet: 1/2 NPSM Low pressure 1/2

More information

XB IEC Terminal Blocks. Screw Type Insulation Displacement Connection Type

XB IEC Terminal Blocks. Screw Type Insulation Displacement Connection Type XB IEC Terminal Blocks Screw Type Spring Cage Type Insulation Displacement Connection Type 2 XB IEC Terminal Blocks. Versatility, quality, and reliability. Sometimes it s the little things Eaton knows

More information

00000 Series Clevis Pin Slotted Hexagon Hex Key Recommended Corresponding Part No. Part No. Size Torque Preload SLT* SLT* HEX

00000 Series Clevis Pin Slotted Hexagon Hex Key Recommended Corresponding Part No. Part No. Size Torque Preload SLT* SLT* HEX 00000 Series Clevis Pin All clevis pins are manufactured from heat treated 416 stainless steel to provide superior strength and wear. Hardness is between 37-40 Rc. The DCD Clevis Pin is a shouldered type

More information

Conduit Fittings & Accessories Directional Drilling Conduit Utility Duct Telephone Duct Residential Boxes

Conduit Fittings & Accessories Directional Drilling Conduit Utility Duct Telephone Duct Residential Boxes CANTEX INC. 301 Commerce Ste 2700 Fort Worth, Texas 76102 817-215-7000 Fax: 817-215-7001 Conduit Fittings & Accessories Directional Drilling Conduit Utility Duct Telephone Duct Residential Boxes YOUR FULL

More information

Understanding Electrical Terms

Understanding Electrical Terms Understanding Electrical Terms Complimentary brochure from Understanding Electrical Terms In today s computer-intensive work environments, a critical issue is clean, reliable power. Powerlite is the industry

More information

Plastic Diffusers & Grilles

Plastic Diffusers & Grilles Diffusers & Grilles No rust, no corrosion Won t fade or yellow Scratches don t show No painting or repainting Won t bend Mildew resistant Consistent smooth finish Indistinguishable from metal when installed

More information

CADDY CAT LINKS. Unleash the versatility

CADDY CAT LINKS. Unleash the versatility CADDY CAT LINKS Unleash the versatility CADDY CAT LINKS Cable Management System CADDY CAT LINKS is the most technologically advanced cable support system from ERICO. CADDY CAT LINKS is UL listed and meets

More information

SYSTIMAX 360 ipatch InstaPATCH Fiber Shelf Instructions

SYSTIMAX 360 ipatch InstaPATCH Fiber Shelf Instructions Issue 6, June 2014 SYSTIMAX 360 ipatch InstaPATCH Fiber Shelf Instructions General The SYSTIMAX 360 ipatch InstaPATCH fiber shelf is a SYSTIMAX approved product and is available in a sliding configuration

More information

Lunera T-LED Lamp Family: Engineered for Quality & Reliability

Lunera T-LED Lamp Family: Engineered for Quality & Reliability Application Note Lunera T-LED Lamp Family: Engineered for Quality & Reliability Engineering Best-of-Class T-LED Lamps Lunera s T-LED Lamp family is engineered to be the best-ofclass, setting the industry

More information

1SLC811001B0202. Wiring ducts. the widest choice for greater convenience and speed at work

1SLC811001B0202. Wiring ducts. the widest choice for greater convenience and speed at work 1SLC811001B0202 Wiring ducts the widest choice for greater convenience and speed at work No application is beyond its reach All the space cables need. Less complicated work brings installers and panel

More information

Type MTS Miniature Test Switches

Type MTS Miniature Test Switches Type MTS Miniature Test Switches o o o o Compact and versatile Front- and back-connected styles Safe, durable, rugged and reliable Recognized by CUL & UL DESCRIPTION In many panelboard, switchgear, metering,

More information

Timber Sectional Doors

Timber Sectional Doors are available in a wide variety of sophisticated panel designs and finishes and provide a warm, cozy and welcoming impression. Typically manufactured from Western Red Cedar, these quality doors can truly

More information

RECESSED TRACK (120V) SPECIFICATIONS

RECESSED TRACK (120V) SPECIFICATIONS RECESSED TRACK (120V) SPECIFICATIONS GENERAL Recessed track shall be approved by the NEC for flush-mounting into ceiling or any flat surface. Recessed Track shall allow fixtures to be easily focused, switched,

More information

FIST-GSS2 FIST-GSS3. Fist Generic Splicing Shelf. Contents. 1 Introduction. 2 General. 3 Installation of the shelf. 5 Termination of the pigtails

FIST-GSS2 FIST-GSS3. Fist Generic Splicing Shelf. Contents. 1 Introduction. 2 General. 3 Installation of the shelf. 5 Termination of the pigtails FIST-GSS2 FIST-GSS3 I N S T A L L A T I O N I N S T R U C T I O N Fist Generic Splicing Shelf Contents 1 Introduction 2 General 2.1 Kit content 2.2 Tools 3 Installation of the shelf 3.1 Mounting the shelf

More information

Two Circuit Trac System TRAC SECTION, JOINERS & FEEDS

Two Circuit Trac System TRAC SECTION, JOINERS & FEEDS Project: Fixture Type: Location: Contact/Phone: PRODUCT DESCRIPTION DIMENSIONS Low-Profile, two-circuit trac sections for surface or pendant mounting. Provides two separate 20-amp circuits from a single

More information

Number of reducing brackets required to accommodate 19- and 23-in. equipment in different cabinet widths

Number of reducing brackets required to accommodate 19- and 23-in. equipment in different cabinet widths Spec-00153 Free-Stand Cabinets PROLINE Cabinet Cable Managers PROLINE CABLETEK Vertical Cable Manager For routing and bundling cable inside - and -mm wide PROLINE cabinets. Variety of sizes provide mounting

More information

underfloor 49 UFC UFC 50 FAS P 50 UFCN 51 UC C DF 54 UFS 55 UFFS 56 UFS Cablofil cable management UNDER FLOOR SUPPORT CLAMP kit

underfloor 49 UFC UFC 50 FAS P 50 UFCN 51 UC C DF 54 UFS 55 UFFS 56 UFS Cablofil cable management UNDER FLOOR SUPPORT CLAMP kit underfloor 49 UFC 550 UNDER FLOOR SUPPORT CLAMP kit 49 UFC UNDER FLOOR SUPPORT CLAMP 50 FAS P FAS PROFILE 50 UFCN UNDER FLOOR CLAMP 51 UC 50 CABLE TRAY STANDOFF 51 C 50 UNDER FLOOR ATTACHMENT 52 fas l

More information

WORK STATION BRIDGE CRANES

WORK STATION BRIDGE CRANES FREE STANDING WORK STATION BRIDGE CRANES CAPACITIES: SPANS: ENCLOSED TRACKS: PRODUCTIVITY: Up to 4000 lbs Up to 30' Steel, Aluminum & Stainless Steel Average 28% Increase A Class Above... In Productivity.

More information

Sentinel Field Satellite Controller Metal Pedestal, Plastic Pedestal and Wall Mount Models Installation Instructions

Sentinel Field Satellite Controller Metal Pedestal, Plastic Pedestal and Wall Mount Models Installation Instructions WARNING HIGH VOLTAGE 115V 4 M AP Sentinel Field Satellite Controller Metal Pedestal, Plastic Pedestal and Wall Mount Models Installation Instructions Important: For your protection and the safety of the

More information

2018 LED Downlight Series

2018 LED Downlight Series 2018 LED Downlight Series DLEv2 DSKv2 DSE DRD DQD DGD More Choices for More Applications NICOR strives to deliver ease of installation and high-performance lighting solutions while providing a wide variety

More information

SPEC SHEET. OmniReach FTTX Solutions. NEMA Fiber Demarcation Box (FDB) Features

SPEC SHEET. OmniReach FTTX Solutions. NEMA Fiber Demarcation Box (FDB) Features ADC s OmniReach FTTX Solutions are the industry s first infrastructure solutions designed from the ground up to meet the unique requirements of FTTX networks. Designed for operational efficiency and scalability,

More information

Section 1 COYOTE Closure Series

Section 1 COYOTE Closure Series COYOTE Closure Series: Section Section COYOTE Closure Series Table of Contents Page COYOTE Closure Overview...-2 COYOTE Splice Tray & Closure Capacity Charts...-4 COYOTE Closure...-7 COYOTE PUP Closure...-9

More information

Truck Mounted Concrete Pumps Optimum Conveyance of Concrete

Truck Mounted Concrete Pumps Optimum Conveyance of Concrete Truck Mounted Concrete Pumps Optimum Conveyance of Concrete More profit by way of investment Sound investment Financial savings over the long term Maximum life-expectancy and reduced servicing costs ensure

More information

Series 3 & 4 Stainless Steel - Accessories

Series 3 & 4 Stainless Steel - Accessories - Accessories Splice Plates Standard 8-hole pattern for all steel splice plates. One pair including hardware provided with straight section. (Expansion splice quantity subtracted) Boxed in pairs with hardware.

More information

Haworth prices in this book will increase on March 1, 2017 by 4% Intuity Benching North America Specification Guide / Price List June 2015

Haworth prices in this book will increase on March 1, 2017 by 4% Intuity Benching North America Specification Guide / Price List June 2015 Haworth prices in this book will increase on March 1, 2017 by 4% Intuity Benching North America Specification Guide / Price List June 2015 Electronic Update Page Intuity Benching Price List The table below

More information

Cabinet and Rack Installation

Cabinet and Rack Installation Cabinet and Rack Requirements, page 1 Cisco MDS 9000 Family Telco and EIA Shelf Bracket, page 3 Cabinet and Rack Requirements This section provides the Cisco MDS 9000 Family requirements for the following

More information