PANEL SPLICE SEE DETAIL A1.3 FLOATING TRIM SEE DETAIL A1.7 TRIM NOT SHOWN FOR CLARITY
|
|
- Shon Franklin
- 5 years ago
- Views:
Transcription
1 V-7 CAIE 4" MODULE OPTIONAL FLUSH CLOSUE OPTIONAL ECESSED CLOSUE " " " 5 8 " " 12 GA HANGE WIE, BY OTHES, NOT BY HUNTE DOUGLAS SEE DETAIL A1.2 TYPICAL SECTION SUSPENSION EQUIEMENTS SEE DETAIL A PANEL SEE DETAIL A1.1 V-7 CAIE SPLICE SEE DETAIL A1.5 1" WALL ANGLE SEE DETAIL A1.6 PANEL SPLICE SEE DETAIL A1.3 FLOATING TIM SEE DETAIL A1.7 TIM NOT SHOWN FO CLAITY INTEIO INSTALLATION SEE DETAILS A1.8 THOUGH A1.11 FO FIXTUE OPENING ECOMMENDATIONS PANEL END CAP SEE DETAIL A1.4 MATEIAL: 0.020" O 0.025" ALUMINUM 84 PANEL 0.040" ALUMINUM V-7 CAIE FINISH: PAINT / POWDE COAT / DECOATED WOOD LOOK FINISH PEFOATION: #124 (15% OPEN) / #140 (23% OPEN) / NON-PEFOATED TOLEANCES FACTIONAL: +/- 1 32" ANGULA: +/- 1 2 (.5 ) OVEALL ISOMETIC VIEW POJECT: 84 PODUCT DAWING NUMBE: 84-A1.0 PAT NUMBE: N/A DAWN BY: HDAP ENGINEEING
2 " SYSTEM HEIGHT " PANEL WIDTH 5 8 " PANEL HEIGHT V-7 CAIE 84 PANEL 5 8 " PANEL HEIGHT 5 16 " OUNDED EDGE PEFOATION DIECTION PEFOATION DIECTION " " 5 16 " OUNDED EDGE '-0" MINIMUM PANEL LENGTH 16'-0" MAXIMUM ECOMMENDED PANEL LENGTH* LONGE LENGTH PANELS AVAILABLE, CONTACT HUNTE DOUGLAS FACTOY END & SIDE PANEL VIEW *PANEL LENGTHS AVAILABLE IN ± 1 8" INCEMENTS, MINIMUM QUANTITIES MAY APPLY *VIEW FOM BELOW MATEIAL THICKNESS 84:.020" O.025" ALUMINUM PANEL FINISHES PAINTED & POWDE COATED -.020" O.025" ALUM. DECOATED WOOD FINISH (POWDE COATED) -.025" ALUM. PEFOATION # " ALUM: PEF. AEA 15% OPEN HOLE DIAMETE 0.079" PEFOATION # " ALUM: PEF. AEA 23% OPEN HOLE DIAMETE 0.039" PANEL MATEIALS & FINISHES AVAILABLE PEFOATIONS SCALE: 6" = 1'-0" MATEIAL: 0.020" O 0.025" ALUMINUM 84 PANEL 0.040" ALUMINUM V-7 CAIE FINISH: PAINT / POWDE COAT / DECOATED WOOD FINISH PEFOATION: #124 (15% OPEN) / #140 (23% OPEN) / NON-PEFOATED TOLEANCES FACTIONAL: +/- 1 32" ANGULA: +/- 1 2 (.5 ) PANEL POJECT: 84 PODUCT DAWING NUMBE: 84-A1.1 PAT NUMBE: N/A DAWN BY: HDAP ENGINEEING
3 SIDE VIEW OF V-7 CAIE WITH PANEL END VIEW OF V-7 CAIE WITH PANEL 84 PANEL V-7 CAIE* MATEIAL: FINISH: PAT LENGTH: 0.040" ALUMINUM MATTE BLACK 16'-0" V-7 CAIE *INTEGAL CAIE SPLICE, SEE DETAIL A1.5 INTEIO INSTALLATION MATEIAL: 0.020" O 0.025" ALUMINUM 84 PANEL 0.040" ALUMINUM V-7 CAIE FINISH: PAINT / POWDE COAT / DECOATED WOOD FINISH PEFOATION: #124 (15% OPEN) / #140 (23% OPEN) / NON-PEFOATED TOLEANCES FACTIONAL: +/- 1 32" ANGULA: +/- 1 2 (.5 ) CAIE POJECT: 84 PODUCT DAWING NUMBE: 84-A1.2 PAT NUMBE: N/A DAWN BY: HDAP ENGINEEING
4 84 PANEL 84/G PANEL SPLICE 84 PANEL 84 PANEL V-7 CAIE 84/G PANEL SPLICE NOTE 1: DO NOT SPLICE PANELS DIECTLY BELOW V-7 CAIES. PANEL SPLICES DO NOT FIT UNDE CAIES. NOTE 2: FIELD CUT PANELS AS EQUIED TO CEATE A ANDOM STAGGEED SEAM PATTEN. AVOID ALIGNED SEAMS. V-7 CAIE BEYOND V-7 CAIE PANEL SEAM SCALE: 6" = 1'-0" 84/G PANEL SPLICE, WILL NOT FIT UNDE V-7 CAIE 84 PANEL SECTION SCALE: 6" = 1'-0" 84 PANEL 84/G PANEL SPLICE, WILL NOT FIT UNDE V-7 CAIE INTEIO INSTALLATION *HANGE WIE OMITTED FO CLAITY MATEIAL: 0.020" O 0.025" ALUMINUM 84 PANEL 0.040" ALUMINUM V-7 CAIE FINISH: PAINT / POWDE COAT / DECOATED WOOD FINISH PEFOATION: #124 (15% OPEN) / #140 (23% OPEN) / NON-PEFOATED TOLEANCES FACTIONAL: +/- 1 32" ANGULA: +/- 1 2 (.5 ) PANEL SPLICE POJECT: 84 PODUCT DAWING NUMBE: 84-A1.3 PAT NUMBE: N/A DAWN BY: HDAP ENGINEEING
5 V-7 CAIE 84 PANEL FICTION FIT, ADD ADHESIVE ON TOP AS NEEDED 84/G END CAP V-7 CAIE 84/G END CAP INTEIO INSTALLATION SCALE: FULL (1:1) 84 PANEL *HANGE WIE OMITTED FO CLAITY MATEIAL: 0.020" O 0.025" ALUMINUM 84 PANEL 0.040" ALUMINUM V-7 CAIE FINISH: PAINT / POWDE COAT / DECOATED WOOD FINISH PEFOATION: #124 (15% OPEN) / #140 (23% OPEN) / NON-PEFOATED TOLEANCES FACTIONAL: +/- 1 32" ANGULA: +/- 1 2 (.5 ) PANEL END CAP POJECT: 84 PODUCT DAWING NUMBE: 84-A1.4 PAT NUMBE: N/A DAWN BY: HDAP ENGINEEING
6 INTEGAL V-7 CAIE SPLICE V-7 CAIE 84 PANEL THE V-7 CAIE CONTAINS AN INTEGAL SPLICE. NEST ONE END OF THE CAIE INTO THE OTHE END AND LINE UP THE HOLES AND FLANGES TO MAINTAIN THE MODULE. V-7 CAIE SCEW FASTENES TWO (2) ON EACH SIDE OF THE CAIE, FOU (4) TOTAL AE EQUIED TO SECUE THE CAIES. SCEW FASTENES TWO (2) ON EACH SIDE OF THE CAIE, FOU (4) TOTAL, EQUIED 84 PANEL #10 SCEW FASTENES TWO (2) ON EACH SIDE OF THE CAIE, FOU (4) TOTAL, EQUIED INTEIO INSTALLATION *HANGE WIE OMITTED FO CLAITY MATEIAL: 0.020" O 0.025" ALUMINUM 84 PANEL 0.040" ALUMINUM V-7 CAIE FINISH: PAINT / POWDE COAT / DECOATED WOOD FINISH PEFOATION: #124 (15% OPEN) / #140 (23% OPEN) / NON-PEFOATED TOLEANCES FACTIONAL: +/- 1 32" ANGULA: +/- 1 2 (.5 ) UNIVESAL CAIE SPLICE POJECT: 84 PODUCT DAWING NUMBE: 84-A1.5 PAT NUMBE: N/A DAWN BY: HDAP ENGINEEING
7 FIELD MITE TIMS AT CONES FIELD CUT 84 PANEL SIDE FO WIDTH V-7 CAIE BEYOND FIELD CUT 84 PANEL ENDS FO LENGTH AS EQUIED, TYPICAL 1" FIELD CUT 84 PANEL SIDE 1" x 1" WALL ANGLE HOLD DOWN 1" SCALE: 6" = 1'-0" 1" x 1" WALL ANGLE TO SECUE FIELD CUT PANEL SIDE. 1" WALL ANGLE 0.025" ALUMINUM MATEIAL & FINISH TO MATCH, TYPICAL 1" 84 PANEL WALL ANGLE TIM INTEIO INSTALLATION V-7 CAIE *HANGE WIE OMITTED FO CLAITY MATEIAL: 0.020" O 0.025" ALUMINUM 84 PANEL 0.040" ALUMINUM V-7 CAIE FINISH: PAINT / POWDE COAT / DECOATED WOOD FINISH PEFOATION: #124 (15% OPEN) / #140 (23% OPEN) / NON-PEFOATED TOLEANCES FACTIONAL: +/- 1 32" ANGULA: +/- 1 2 (.5 ) WALL ANGLE TIM POJECT: 84 PODUCT DAWING NUMBE: 84-A1.6 PAT NUMBE: N/A DAWN BY: HDAP ENGINEEING
8 2 1 4 " NOTCH TIM AS EQUIED FO HANGE WIE V-7 CAIE BEYOND " 2" 2" FIELD CUT 84 PANEL END SCALE: 6" = 1'-0" 1" FIELD CUT 84 PANEL SIDE 1" x 1" WALL ANGLE HOLD DOWN SECTION SCALE: 6" = 1'-0" 1" DOUBLE-SIDED ADHESIVE TO SECUE 1" x 1" WALL ANGLE O USE POP-IVET 2" J-TIM* 0.025" ALUMINUM MATEIAL & FINISH TO MATCH, TYPICAL *TIM WAPS PANEL & CAIE INTEIO INSTALLATION *SOME HANGE WIE OMITTED FO CLAITY MATEIAL: 0.020" O 0.025" ALUMINUM 84 PANEL 0.040" ALUMINUM V-7 CAIE FINISH: PAINT / POWDE COAT / DECOATED WOOD FINISH PEFOATION: #124 (15% OPEN) / #140 (23% OPEN) / NON-PEFOATED TOLEANCES FACTIONAL: +/- 1 32" ANGULA: +/- 1 2 (.5 ) FLOATING TIM POJECT: 84 PODUCT DAWING NUMBE: 84-A1.7 PAT NUMBE: N/A DAWN BY: HDAP ENGINEEING
9 ADD CAIE AS NECCESSAY TO MAINTAIN 48" O.C. MAX SPACING AT FIXTUE INTEUPTION, TYP. INTEUPT CAIE AT FIXTUE LOCATION, TYP. 48" FIXTUE LENGTH EXAMPLE FULL 84 PANEL FIELD CUT 84 PANEL TYPICAL ISOMETIC TOP VIEW 48" O.C. MAX CAIE SPACING, TYP. 4-21/32" MAX CLEA OPENING FO SINGLE PANEL INTEUPTION 12 GA HANGE WIE, 48" O.C. MAX, BY OTHES, TYPICAL 12" MAX OVEHANG, TYP. LIGHT FIXTUE INDEPENDENTLY SUPPOTED IN ACCODANCE WITH LOCAL BUILDING CODES & LIGHT FIXTUE MANUFACTUE'S INSTUCTIONS 4" X 48" ECESSED FLUOESCENT FIXTUE EXAMPLE WITH TIM FLANGE 12 GA HANGE WIE, 48" O.C. MAX, BY OTHES, TYPICAL LIGHT FIXTUE INDEPENDENTLY SUPPOTED IN ACCODANCE WITH LOCAL BUILDING CODES & LIGHT FIXTUE MANUFACTUE'S INSTUCTIONS V-7 CAIE V-7 CAIE BEYOND 4" X 48" ECESSED FLUOESCENT FIXTUE EXAMPLE WITH TIM FLANGE 84 PANEL ECESSED CLOSUE OPTIONAL * " FLANGED FIXTUE ECOMMENDED V-7 CAIE 48" FIXTUE LENGTH EXAMPLE FIELD CUT 84 PANEL FLANGED FIXTUE ECOMMENDED *4-21/32" MAX CLEA OPENING, PANEL EDGE TO PANEL EDGE, FO SINGLE PANEL INTEUPTION. 8-21/32" MAX CLEA OPENING, PANEL EDGE TO PANEL EDGE, FO DOUBLE PANEL INTEUPTION. SECTION INTEIO INSTALLATION NOTE: FIXTUE WITH TIM FLANGE NOT BY HUNTE DOUGLAS MATEIAL: 0.020" O 0.025" ALUMINUM 84 PANEL 0.040" ALUMINUM V-7 CAIE FINISH: PAINT / POWDE COAT / DECOATED WOOD FINISH PEFOATION: #124 (15% OPEN) / #140 (23% OPEN) / NON-PEFOATED TOLEANCES FACTIONAL: +/- 1 32" ANGULA: +/- 1 2 (.5 ) INTEUPTED PANEL FO TYPICAL FIXTUE POJECT: 84 PODUCT DAWING NUMBE: 84-A1.8 PAT NUMBE: N/A DAWN BY: HDAP ENGINEEING
10 FULL 84 PANEL FIELD CUT 84 PANEL 12" MAX PANEL OVEHANG FIXTUE WIDTH VAIES 48" O.C. MAX CAIE SPACING, TYP. 48" FIXTUE LENGTH EXAMPLE TYPICAL ISOMETIC TOP VIEW 12 GA HANGE WIE, 48" O.C. MAX, BY OTHES, TYPICAL LIGHT FIXTUE INDEPENDENTLY SUPPOTED IN ACCODANCE WITH LOCAL BUILDING CODES & LIGHT FIXTUE MANUFACTUE'S INSTUCTIONS 12 GA HANGE WIE, 48" O.C. MAX, BY OTHES, TYPICAL 12" MAX, TYPICAL LIGHT FIXTUE INDEPENDENTLY SUPPOTED IN ACCODANCE WITH LOCAL BUILDING CODES & LIGHT FIXTUE MANUFACTUE'S INSTUCTIONS 4" X 48" ECESSED FLUOESCENT FIXTUE EXAMPLE WITH TIM FLANGE V-7 CAIE 4" X 48" ECESSED FLUOESCENT FIXTUE EXAMPLE WITH TIM FLANGE 84 PANEL FULL 84 PANEL BEYOND V-7 CAIE 48" FIXTUE LENGTH EXAMPLE FLANGED FIXTUE ECOMMENDED SECTION FIELD CUT 84 PANEL FIXTUE WIDTH VAIES FLANGED FIXTUE ECOMMENDED INTEIO INSTALLATION NOTE: FIXTUE WITH TIM FLANGE NOT BY HUNTE DOUGLAS MATEIAL: 0.020" O 0.025" ALUMINUM 84 PANEL 0.040" ALUMINUM V-7 CAIE FINISH: PAINT / POWDE COAT / DECOATED WOOD FINISH PEFOATION: #124 (15% OPEN) / #140 (23% OPEN) / NON-PEFOATED TOLEANCES FACTIONAL: +/- 1 32" ANGULA: +/- 1 2 (.5 ) FIELD CUT PANEL FO TYPICAL FIXTUE POJECT: 84 PODUCT DAWING NUMBE: 84-A1.9 PAT NUMBE: N/A DAWN BY: HDAP ENGINEEING
11 ADD CAIE AS NECCESSAY TO MAINTAIN 48" O.C. MAX SPACING AT DIFFUSE INTEUPTION, TYP. INTEUPT CAIE AT DIFFUSE LOCATION, TYP. 48" DIFFUSE LENGTH EXAMPLE FULL 84 PANEL FIELD CUT 84 PANEL TYPICAL ISOMETIC TOP VIEW 48" O.C. MAX CAIE SPACING, TYP. 4-21/32" MAX CLEA OPENING FO SINGLE PANEL INTEUPTION 12 GA HANGE WIE, 48" O.C. MAX, BY OTHES, TYPICAL 12" MAX OVEHANG, TYP. LINEA SLOT DIFFUSE INDEPENDENTLY SUPPOTED IN ACCODANCE WITH LOCAL BUILDING CODES & AI DIFFUSE MANUFACTUE'S INSTUCTIONS 4" X 48" LINEA SLOT DIFFUSE EXAMPLE WITH TIM FLANGE 12 GA HANGE WIE, 48" O.C. MAX, BY OTHES, TYPICAL LINEA SLOT DIFFUSE INDEPENDENTLY SUPPOTED IN ACCODANCE WITH LOCAL BUILDING CODES & AI DIFFUSE MANUFACTUE'S INSTUCTIONS V-7 CAIE V-7 CAIE BEYOND 4" X 48" LINEA SLOT DIFFUSE EXAMPLE WITH TIM FLANGE 84 PANEL ECESSED CLOSUE OPTIONAL * " FLANGED DIFFUSE ECOMMENDED *4-21/32" MAX CLEA OPENING, PANEL EDGE TO PANEL EDGE, FO SINGLE PANEL INTEUPTION. 8-21/32" MAX CLEA OPENING, PANEL EDGE TO PANEL EDGE, FO DOUBLE PANEL INTEUPTION. V-7 CAIE SECTION 48" DIFFUSE LENGTH EXAMPLE FIELD CUT 84 PANEL FLANGED DIFFUSE ECOMMENDED INTEIO INSTALLATION NOTE: DIFFUSE WITH TIM FLANGE NOT BY HUNTE DOUGLAS MATEIAL: 0.020" O 0.025" ALUMINUM 84 PANEL 0.040" ALUMINUM V-7 CAIE FINISH: PAINT / POWDE COAT / DECOATED WOOD FINISH PEFOATION: #124 (15% OPEN) / #140 (23% OPEN) / NON-PEFOATED TOLEANCES FACTIONAL: +/- 1 32" ANGULA: +/- 1 2 (.5 ) INTEUPTED PANEL FO TYPICAL DIFFUSE POJECT: 84 PODUCT DAWING NUMBE: 84-A1.10 PAT NUMBE: N/A DAWN BY: HDAP ENGINEEING
12 FIELD CUT 84 PANEL FULL 84 PANEL 12" MAX PANEL OVEHANG DIFFUSE WIDTH VAIES 48" O.C. MAX CAIE SPACING, TYP. 48" DIFFUSE LENGTH EXAMPLE TYPICAL ISOMETIC TOP VIEW 12 GA HANGE WIE, 48" O.C. MAX, BY OTHES, TYPICAL LINEA SLOT DIFFUSE INDEPENDENTLY SUPPOTED IN ACCODANCE WITH LOCAL BUILDING CODES & AI DIFFUSE MANUFACTUE'S INSTUCTIONS 12 GA HANGE WIE, 48" O.C. MAX, BY OTHES, TYPICAL 12" MAX OVEHANG, TYP. LINEA SLOT DIFFUSE INDEPENDENTLY SUPPOTED IN ACCODANCE WITH LOCAL BUILDING CODES & AI DIFFUSE MANUFACTUE'S INSTUCTIONS 4" X 48" LINEA SLOT DIFFUSE EXAMPLE WITH TIM FLANGE V-7 CAIE 4" X 48" LINEA SLOT DIFFUSE EXAMPLE WITH TIM FLANGE 84 PANEL FULL 84 PANEL BEYOND V-7 CAIE 48" DIFFUSE LENGTH EXAMPLE FLANGED DIFFUSE ECOMMENDED FIELD CUT 84 PANEL DIFFUSE WIDTH VAIES FLANGED DIFFUSE ECOMMENDED SECTION INTEIO INSTALLATION NOTE: DIFFUSE WITH TIM FLANGE NOT BY HUNTE DOUGLAS MATEIAL: 0.020" O 0.025" ALUMINUM 84 PANEL 0.040" ALUMINUM V-7 CAIE FINISH: PAINT / POWDE COAT / DECOATED WOOD FINISH PEFOATION: #124 (15% OPEN) / #140 (23% OPEN) / NON-PEFOATED TOLEANCES FACTIONAL: +/- 1 32" ANGULA: +/- 1 2 (.5 ) FIELD CUT PANEL FO TYPICAL DIFFUSE POJECT: 84 PODUCT DAWING NUMBE: 84-A1.11 PAT NUMBE: N/A DAWN BY: HDAP ENGINEEING
13 SPLAYED 12 GA HANGE WIE, BY OTHES, TYP COMPESSION STUT, BY OTHES, TYP. E N S W V-7 CAIE 84 PANEL LATEAL BACING: BACE WITH HANGE WIES AND STUTS PE ASTM E-580 AND IN ACCODANCE WITH LOCAL CODE EQUIEMENTS. (4) #12 GAUGE WIES SPLAYED 90 FOM EACH OTHE AT ANGLE NOT EXCEEDING 45 FOM PLANE OF CEILING. A STUT FASTENED TO MAIN UNNE SHALL BE EXTENDED TO AND FASTENED TO STUCTUE ABOVE. SPLAYED WIE AND STUT BACING TO BE PLACED NOT MOE THAN 12 FEET ON CENTE IN EACH DIECTION, WITH THE FIST POINT WITHIN 6 FEET FOM EACH WALL. INTEIO INSTALLATION MATEIAL: 0.020" O 0.025" ALUMINUM 84 PANEL 0.040" ALUMINUM V-7 CAIE FINISH: PAINT / POWDE COAT / DECOATED WOOD FINISH PEFOATION: #124 (15% OPEN) / #140 (23% OPEN) / NON-PEFOATED TOLEANCES FACTIONAL: +/- 1 32" ANGULA: +/- 1 2 (.5 ) SEISMIC POJECT: 84 PODUCT DAWING NUMBE: 84-A1.12 PAT NUMBE: N/A DAWN BY: HDAP ENGINEEING
INTERIOR INSTALLATION
HOOK ON CROSS CONNECTOR CLAMP AT ALL INTERSECTIONS OF S 4-1 4" PANEL 1/2" x 1-1/2" 16 GA CR CHANNEL PRIMARY AT 48" O.C. MAX SPACING, TYPICAL. PANEL 1 1 2 " 12 GA HANGER WIRE, BY OTHERS, NOT BY HUNTER DOUGLAS.
More informationINSTALLATION INSTRUCTIONS
R 1 2 5 3 4 HEPFU TOOS Impact Socket Sizes: 30mm, 3/4, 5/16, 9/16 and 1-1/8 15/16 Deep Well Socket 5/16 Dive Wench Sizes: 1-1/8, 15,16, 3/4 and 9/16 Anti-seize WD-40 Pipe Thead Sealant White Thead Sealing
More informationDETAIL 'A' INTERIOR INSTALLATION. OVERALL ISOMETRIC VIEW (unless noted otherwise) 300C CARRIER 12 GA HANGER WIRE, BY OTHERS, NOT BY HUNTER DOUGLAS
3 " NOM. 316 G, ER V RO N HA. TYP SEE DETAILS A1.7 THROUGH A1.10 FOR FIXTURE OPENING RECOMMENDATIONS IE ARR XC 12 GA HANGER WIRE, BY OTHERS, NOT BY HUNTER DOUGLAS SEE DETAIL A1.2 A "M 1'-0 300C PANEL SPLICE
More informationDeep Groove Ball Bearings
Deep Goove all eaings Open type Shielded type Sealed type (non-contact) Expansion Compensating eaing 1. Design featues and special chaacteistics Deep goove ball beaings ae vey widely used. A deep goove
More informationmodel H with1920
model with1920 ADA Compliant Chilled Dual Wall-Mount Fountain and Bottle Filler FEATUES & BENEFITS CONSTUCTION 18-gauge Type 304 stainless steel swirl design bowl, 14-gauge Type 304 stainless steel bracket,
More informationCylindrical Roller Bearings
ylindical olle eas ontents Seies M1000, 1200, 1300, 1900, 5200, 5300, 7300 Intoduction... G-1 Pictoial Index... G-3 Selection... G-5 atings... G-7 Dimensions... G-15 Shaft Dimensions... G-25 Housing Dimensions...
More informationStandard Styles inch/metric
Rolle eaings Radial Cylindical Rolle eaings oe inch: metic: 200 20.0 in. 200 200 mm 42 4.25 in. 210 210 mm 43 4.375 in. 220 220 mm standad sizes standad sizes ae 4-27.20 inch ae 100-600 mm Standad Styles
More informationTechnical features. Precision combined bearings
PRECISION COMINED EARINGS, WITH ADJUSTALE AXIAL PRELOAD Technical featues Pecision combined beaings Types AXN and ARN combined beaings and thei deivatives consist of a adial needle beaing with cage, in
More informationTechnical features. Precision combined bearings
PRECISION COMINED EARINGS, WITH ADJUSTALE AXIAL PRELOAD Polígono Indutial O Rebullón s/n. 36416 - Mos - España - odavigo@odavigo.com Technical featues Pecision combined beaings Types AXN and ARN combined
More informationSUMMARY INFORMATION. MCC 12.0 RLA 8.6 LRA-Low * LRA-High 45.0 LRA-Half Winding * Med Volts 380 High Volts 420 Phase 3 Frequency 50 RPM *
SUMMAY INFOMATION CM3-0400-TFD Application: Air Conditioning efrigerant: -22 Copelaweld 50 Hz Production Status: Available for sale to all U.S. customers. Please check with your local Copeland representative
More informationFull complement cylindrical roller bearings
Full complement cylindical olle beaings INTERPRECISE Donath GmbH Osting 2 90587 Obemichelbach Gemany Phone +49-911-76630-0 Fax +49-911-76630-30 info@intepecise.de www.idc-beaings.com Full complement cylindical
More informationSplit spherical roller bearings. Costs savings through rapid bearing replacement at difficult to access bearing locations
Split spheical olle beaings Costs savings though apid beaing eplacement at difficult to access beaing locations Contents Rapid beaing eplacement 2 Cost savings 2 Application examples 2 Replacement fo beaings
More informationSTAGE MANAGEMENT PRODUCTS - CHOIR STICK MICS
STAGE MANAGEMENT PRODUCTS - CHOIR STICK MICS #CSM- AND #CSM- CHOIR STICK MICROPHONES The CSM- and CSM- Choi Stick Micophones Stick micophone mounts on any standad mi- offe the ultimate pefomance of an
More informationINSTALLING 200 AMP PRIMARY SPLICES: LC SHIELDED CABLE TO LC SHIELDED CABLE INSTALLING 200 AMP PRIMARY SPLICES: LC SHIELDED CABLE TO LC SHIELDED CABLE
6. PEPAING CABLE FO TEMINATION AND SPLICING PEPAING CABLE FO TEMINATION AND SPLICING CETIFICATION EQUIEMENTS TO INSTALL BULK FEEDE SPLICES, TEMINATOS AND ELBOWS 6.- 6.- 6. PIMAY SPLICES 5 & 75 SPLICES
More informationModel 1920FR Drinking Fountain
INSTALLATION, OPEATION & MAINTENANCE INSTUCTIONS 1455 Kleppe Lane Sparks, NV 8941-6467 (775) 59-4712 Fax (775) 59-7424 E-mail: haws@hawsco.com website: www.hawsco.com Model 1920F Drinking Fountain No.
More informationBearing specification tables
eaing specification tables ontents Standad beaings Deep goove ball beaings... 4 Single-ow Open type... 8 Shielded/sealed type... 0 Snap ing goove/locating snap ing type... 3 Exta-small, miniatue ball beaings
More informationTechnical Information. Deep Groove Ball Brgs. Angular Contact Ball Brgs. Cylindrical Roller Brgs. Full-Complement Cylindrical Roller Brgs.
Technical Infomation Page No. A7 Tech. Info. Deep Goove all gs. 4 Angula Contact all gs. 20 Cylindical Rolle gs. 44 Full-Complement Cylindical Rolle gs. 78 Tapeed Rolle gs. 96 Spheical Rolle gs. 286 Thust
More informationWorking Press. (PSI) Min. Burst Pressure. mm in fraction mm in fraction bar psi bar psi Kg/m lbs/ft feet
APPLICATION H1571 Boston Minefoce LOW & MEDIUM HIGH SPECIALTY HOSE ACCESSORRIES & ADAPTERS & Pat Numbe H157112 H157112- H1776/H1777 Boston Pefection 300 Pat Numbe Inne Tube: Modified PVC Reinfocement:
More informationMAE 412 Machines and Mechanisms 2: Catapult Project 12/13/02
MAE 1 Machines and Mechanisms : Catapult Poject 1/1/0 Michael Kuczewski Nicholas Laatta Jonathan Leahy Nicholas Leone Kuan Kiong Lim William Louisos Atuo Machuca Jeemy Malik Intoduction: The goup s task
More informationINSTALLING 200 AMP PRIMARY SPLICES: LC SHIELDED CABLE TO LC SHIELDED CABLE INSTALLING 200 AMP PRIMARY SPLICES: LC SHIELDED CABLE TO LC SHIELDED CABLE
6. PEPAING CABLE FO TEMINATION AND SPLICING PEPAING PIMAY CABLE FO TEMINATION AND SPLICING 6.- 6. PIMAY SPLICES 5 & SPLICES (LC TO LC) ALL VOLTAGES 6.-A 5, 5, 75 & SPLICES (LC TO LC) ALL VOLTAGES 6.-B
More informationEaton Aeroquip Triple Crown
Eaton Aeoquip Bette in evey way that mattes Tempeatue Abasion Resistance Eaton engineeing does it again. Select Aeoquip hydaulic hoses, including new MatchMate Global hoses, offe distinct advantages in
More informationSpherical Roller Bearings. NSKHPS, redefining the standard.
Spheical Rolle Beaings NSKHPS, edefining the standad. Continually developing poducts with geate stength and highe accuacy, NSK s new NSKHPS fully incopoate the advantages of NSK s woldclass design, mateials,
More informationHUATONG Medium & Low Voltage Power Cables 0.6/1kV~18/30kV According to IEC 60502, 61034, 60754
POWER ABOUT US Huatong Cable Inc. was founded in 1993 in Luoyang, Henan Povince, the veneable histoical capital that has been saced gound since the late Neolithic peiod and known fo its beautiful peonies.
More informationEaton EMEA Core Hydraulic Hose Products Brochure. Success made simple. The new standard for hydraulic hose and fittings.
Eaton EMEA Coe Hydaulic Hose Poducts Bochue Success made simple. The new standad fo hydaulic hose and fittings. Sometimes less is moe. Fewe poducts, smate choices. Eaton is taking a new appoach to helping
More informationEAS -element clutch EAS -elements
EAS -element clutch EAS -elements www..com Immediate sepaation in case of oveload Fo high speeds and long un-out times High switch-off and epetitive accuacies Integation into existing constuctions possible
More informationLarge Size Tapered Roller Bearings ULTAGE Metric Series
Lage Size Tapeed Rolle Beaings ULTAGE Metic Seies AT. No. 3035/E Lage Size Tapeed Rolle Beaings ULTAGE Metic Seies Lage size tapeed olle beaings (ULTAGE metic seies, OD 270) delive longe life, highe load
More informationBall & Roller Bearings
all & Rolle eaings CAT. NO. 1E-4 1 Stuctues and types A 1 Outline of selection A 14 3 Selection of type A 16 4 Selection of aangement A 5 Selection of dimensions A 4 ounday dimensions 6 A 46 and beaing
More informationCLEAN FITTING (C SERIES / CL SERIES)
N ITTING ( SIS / SIS) pplication - lean ai, Pue wate, Medicinal fluid fo piping eatue - ll of the pats ae washed, assembled and packed in a clean oom and completely oil-fee poducts which did not use any
More information1400 UG PADMOUNT TRANSFORMERS
00 UG PADMOUNT TANSFOMES //0 ~ FA Bay-O-Net Fuse Schedule for Padmount Transformers ~ HB,HB Hillside Barrier ~ UID Padmounted Equipment Identification Tags & Safety Signs ~ UT Single Phase Padmount Transformer
More informationPrecision Rolling Bearings
R Pecision Rolling Beaings CAT. No. 226-^/E C O N T E N T S Technical Data NTN PRECISION ROLLING BEARINGS Main Spindle Beaings Ball Scew Suppot Beaings NTN PRODUCTS APPENDIX 1. Classification of Pecision
More informationPhysics 132 Quiz # 17
Name (please (please pint) pint) Physics 132 Quiz # 17 1. 1. The The magnitude of of the the magnetic field field due due to to the the pesence of of a chaged body body A) A) vaies diectly with with the
More informationRPG. Characteristics&Advantages
RPG Chaacteistics&Advantages R PG B l o ck Bo d y Lu b e R es e vo i & En d Ca p Lu b e R ete n t i o n M ed i a En d S ea l M et a l Fa m e Bo l t s Fo u R ows o f Bea i n g s Bot to m S ea l Bo l t H
More informationModel Predictive Control for Vehicle Yaw Stability
EngOpt 212 3 d Intenational Confeence on Engineeing Optimization Rio de Janeio, Bazil, 1-5 July 212. Model Pedictive Contol fo Vehicle Yaw Stability Mooyong Choi and Seibum Choi Depatment of Mechanical
More informationSLB-N/SLSQ-N/SLSQK-N
Sysms Holdes Actuatos Souces Simple shape lenses o speading the collimad lase beam. These ae available o expanding the beam diame o in combination with convex, expanding the iadiation aea o illumination
More informationThe standard cages used are pressed steel cages. Additionally Copper alloy machined cages are also available.
Cylindical Rolle eaings Cylindical Rolle eaings These beaings equie featue high adial load as olles and aceway ae in linea contact. These ae ideal fo applications whee thee is heavy impact o adial loading.
More informationDOUBLE INTEGRATED PANEL PREPARATION FOR INTEGRATED DOUBLE MODELS DD603I
DOUBLE INTEGATED PANEL PEPAATION FO INTEGATED DOUBLE MODELS DD603I (NOTE: FO SINGLE MODELS, EFE TO BACK OF THIS BOOK) US part number 526608 J 06/2004 (page 1 of 6) PLEASE NOTE: Your model of may differ
More informationTungsten carbide burrs with ALU cut High-capacity burrs for aluminium
Tungsten cabide bus with cut High-capacity bus fo aluminium Vey boad and compehensive ange, including miniatue bus fo delicate applications Extemely high stock emoval pefomance, long tool life and smooth
More informationCeramic&Exsev bearing series
Ceamic&Exsev beaing seies Exsev beaings fo use in a vacuum envionment Moe and moe beaings ae being used in exteme special envionments, such as in a vacuum, o in a clean, coosive, o heated place. In some
More informationThe contents of this catalogue are the copyright of ESE and may not be reproduced unless permission is granted.
Copyight ESE 2018 The contents of this catalogue ae the copyight of ESE and may not be epoduced unless pemission is ganted. Caes have been taken in evey aspect to ensue the coectness of the data contained
More informationSplit spherical roller bearings. Costs savings through rapid bearing replacement at difficult to access bearing locations
Split spheical olle beaings osts savings though api beaing eplacement at ifficult to access beaing locations Application examples Application examples in the pulp an pape inusty: Fans an ventilatos Mixing
More informationNegative Inserts Positive Inserts. Turning Negative Inserts CN 80 Rhombic. Turning Positive Inserts CC, CP 80 Rhombic
uning Indexable s ~88 uning Indexable s Identi cation ystem olo hipbeake election egative s ositive s ow to ead pages of uning s emet / oated abide / abide ineup uning egative s 80 hombic hombic aallelogam
More informationAngles Hot rolled, weldable structural steel sections
Data sheet: E3.1 Angles Hot olled, weldable stuctual steel sections Geneal desciption AceloMittal Steel South Afica, Newcastle Steel poduces an extensive ange of stuctual steel angles. Non-standad sizes
More informationCERAMIC INSERTS For Turning, Grooving and Milling
SPK Cutting Tools VEHICLES AEROSPACE GEARS & BEARINGS ENGINEERING WIND ENERGY DISCOVER A MULTITUDE OF SOLUTIONS CERAMIC INSERTS Fo Tuning, Gooving and Milling DISCOVER A MULTITUDE OF SOLUTIONS AEROSPACE
More information12 GA HANGER WIRE, BY OTHERS, NOT BY HUNTER DOUGLAS SEE DETAIL A1.1 MAIN RUNNER SPLICE. SPECIFICATIONS (unless noted otherwise)
12 GA HANGER WIRE, BY OTHERS, NOT BY HUNTER DOUGLAS SEE DETAIL A1.1 4' OPEN CELL RUNNER SEE DETAIL A1.7 FOR INFILL PANEL FIXTURE OPENING RECOMMENDATIONS CROSS RUNNER FIELD CUT AT PERIMETER TYPICAL SYSTEM
More informationSUPER PRECISION BEARINGS
SUPER PRECISION BEARINGS Intoduction As technologies evolve, all manufactues shae a global esponsibility to espect and potect the envionment. NSK Motion and Contol poducts eflect ou copoate commitment
More informationH069 General Purpose Truck Hose
APPLICATION H069 Geneal Pupose Tuck SAE R5, SAE J1402 TYPE II, DOT AII, ABS 1 LOW & MEDIUM HIGH SPECIALTY HOSE ACCESSORRIES & ADAPTERS & Pat Numbe Inne Tube: Nitile Reinfocement: 1 Fibe Baid - 1 Steel
More informationRCP2/RCA/RCS2/RCS3 Actuator Slider Type/Rod Type/ Arm Type/Flat Type First Step Guide Eighth Edition
RCP2///RCS3 Actuato Type/ Type/ Am Type/Flat Type Fist Step Guide Eighth Edition Thank you fo puchasing ou poduct. Make sue to ead the Safety Guide and detailed Instuction Manual (CD/DVD) included with
More informationRoller Bearings for Machine Tools. Precision Ball & Roller Bearings for Machine Tools
Rolle Beaings fo Machine Tools Pecision Ball & Rolle Beaings fo Machine Tools Pecision Ball & Rolle Beaings fo Machine Tools CAT. NO. B2005E-1 Catalog Pecision Ball & Rolle Beaings fo Machine Tools Peface
More informationBall and Roller Bearings
R Ball and Rolle Beaings CAT. NO. 222-)!/E Waanty NTN waants, to the oiginal puchase only, that the deliveed poduct which is the subject of this sale (a) will confom to dawings and specifications mutually
More informationFirst Floor Plan - EPC105, 111 and 113 Remodel EL POMAR CENTER (EPC) Facilities Services. Scale: As Shown Date: 05/31/17 Drawn by: LCE
E:\Projects\2017 Projects\17014\Drawings\Mechanical\17014 Mechanical.dwg Facilities Services First Floor Plan - EPC105, 111 and 113 emodel EL POMA CENTE (EPC) M1 Leffingwell Consulting Engineers, Inc.
More informationUp to 100 % higher stock removal performance when used on stainless steel (INOX) in comparison to conventional cross cut burrs
Tungsten cabide bus with cut High-capacity bus fo use on stainless steel () INNOVATION cut Up to 100 % highe stock emoval pefomance when used on stainless steel () in compaison to conventional coss cut
More information1. TYPES AND FEATURES OF ROLLING BEARINGS Part B BEARING HANDLING. Part C ANGULAR CONTACT BALL BEARINGS SPHERICAL ROLLER BEARINGS. Part D.
Pat A 1. TYPES AND FEATURES OF ROLLING EARINGS Pat EARING HANDLING 2.SELECTION OF EARING TYPES 3.SELECTION OF EARING ARRANGEMENT 4.SELECTION OF EARING SIZE 5.SPEEDS 6. OUNDARY DIMENSIONS AND IDENTIFYING
More informationTungsten carbide burrs with STEEL cut High-capacity burrs for steel and cast steel
Tungsten cabide bus with cut High-capacity bus fo steel and cast steel Up to 50 % highe stock emoval pefomance when used on steel and cast steel in compaison to conventional coss cut bus Significantly
More informationCONTROL POWER OFF ON ALARM SILENCE / TEST NEMA 4X 304 STAINLESS STEEL ENCLOSURE W/ OUTER DOOR LAYOUT CUSTOMER JOB NAME PRODUCT O:
PUMP HOU METE PUMP HOU METE 3 4 5 3 4 5 MAIN POWE EMEGENCY POWE ON ON PUMP UN PUMP UN OFF OFF G G PUMP HAND-OFF-AU PUMP HAND-OFF-AU CONTOL POWE OFF ON w 00 AMP GENEA ECEPTACLE PUMP OVELOAD TIP PUMP OVELOAD
More informationRo R l o lliln i g n g B e B a e r a i r n i g n s g
Rolling Beaings Beaing Standads page Deep Goove Ball Beaing 8 28TAG OneWay Thust Ball Beaing fo Automobile KingPins 2 2 3 Tapeed Rolle Beaing 8 32 322 323 Tapeed Rolle Beaing 8 3 332 Tapeed Rolle Beaing
More informationSuper precision BearingS
Supe pecision BeaingS SUPER PRECISION BEARINGS Pat1 Contents Pat1. NSK Supe Pecision Beaings Global Suppot Capabilities P6 Development Capabilities P8 Quality Contol and Poduction Capabilities P 4 5 Global
More informationProjects Oil & Gas. Section Sales Programme
Pojects Oil & Gas Section Sales Pogae 1 2 To e ou pefeed supplie & eliale patne fo te suppl of complete and customized stuctual steel packages. celomittal Ou famil celomittal Wit annual acievale poduction
More informationOPERATOR S MANUAL HWH SYSTEMS CONTROL MODULE FEATURING:
HWH COPOATION OPEATO S MANUAL HWH SYSTEMS CONTOL MODULE FEATUING: BI-AXIS Computerized Hydraulic Leveling Multiple ooms Hydraulic Step and Step Cover Dual Direction Hydraulic Storage Slide Out Auxiliary
More informationFlexible hose solutions
Aeoquip Hose Assembly Maste Catalog Flexible hose solutions Ai conditioning and efigeation hose hose GH001.... -3 GH134.... -4 FC802... -4 FC800... -5 FC555... -6 AROQUIP MASTR CATALOG A-HOOV-MC001-3
More informationInch Series TAPERED ROLLER BEARINGS
Inch Seies APERED ROLLER EARINGS Inch Seies APERED ROLLER EARINGS Publication of New Inch seies apeed Rolle eaing Catalog Allow us to expess ou heatfelt appeciation fo you valuable patonage. At this time
More informationSolutions for a wide variety of applications
Aeoquip Hose Assembly Maste atalog Solutions fo a wide vaiety of applications Geneal pupose hose Geneal pupose hose H201... -3 F332... -4 F647... -4 2556/2565.... -5 F598... -6 F498... -6 F466... -7 2583.....................................
More informationYukon Bureau of Statistics
Yukon Bueau of Statistics 2 9 # 1 $ > 0-2 + 6 & ± 8 < 3 π 7 5 9 1 ^ Highlights: Goss Domestic Poduct (GDP) by Industy at Basic Pices 2016 Yukon s eal GDP by industy fo 2016 was $2,345.3 million (in chained
More informationRubber Insulating Products, Safety Equipment & Dielectric Testing Services
Rubbe Insulating Poducts, Safety Equipment & Dielectic Testing Sevices Fo Electic Utilities, Contactos, Telecom, Cable Povides and Geneal Industy VOLTGaRD TEST Lab ChaNGE-OuT PROGRam Saf-T-GaRD INTERNaTIONaL
More informationLU-0515ASC. ALUMINUM 5 ROW x 15'-0" - UNIVERSAL SERIES MODEL CS.1 OPTIONS: -RB = RUBBER BUMPERS -MS = MUD SILLS 6" RISE / 12" SEAT 5 ROW BLEACHER
LUMINUM 5 OW x 5'-0" - UNIVESL SEIES MODEL OPTIONS: -B = UBBE BUMPES -MS = MUD SILLS 4/4/07 CS. OPTIONL -MS (MUD SILL) OPTIONL -B (UBBE BUMPE) COVE SHEET 80 Sydney oad 80 Sydney oad 5'-0" '-6" TYP. OVEHNG
More informationQ TABLE PREVIOUS PAGE F OF CONTENTS NEXT PAGE
TABLE F OF CONTENTS FINDEX A-Z TABLE F OF CONTENTS F TABLE OF CONTENTS INDEX A-Z PEFIX TABLE OF CONTENTS......................... - GENEAL INFOMATION....................... 8 TEMS........................................
More informationStrong Key Derivation from Biometrics
Stong Key Deivation fom Biometics Benjamin Fulle, Boston Univesity/MIT Lincoln Laboatoy Pivacy Enhancing Technologies fo Biometics, Haifa Januay 15, 2015 Based on thee woks: Computational Fuzzy Extactos
More informationDevelopment, Study, and Testing of Small-Scale Refrigeration System for Electronics Cooling Using Cold Plate Evaporators
EM14 he Second SME Intenational Confeence on Mechanical Engineeing Development, Study, and esting of Small-Scale Refigeation System fo Electonics Cooling Using Cold late Evapoatos hanut Ratchatapattaakul
More informationslotworx Square shoulder face milling and slotting cutters with highly modern cutting edge geometry for universal applications
slotwox Squae shoulde face milling and slotting cuttes with highly moden cutting edge geomety fo univesal applications Object slotwox 177183 squae shoulde face milling cutte bodies milling cutte bodies
More informationCrossed Roller Bearings. Technical Information.
Cossed Rolle eaings Technical Infomation www.hiwin.tw INDUSTRIE 4.0 est Patne Multi Axis Robot Pick-and-place / Assembly / Aay and packaging / Semiconducto / Electo-Optical industy / Automotive industy
More informationUNIWORX PLUS. All-purpose corner radius/high-feed milling cutter for countless finishing options
UNIWORX PLUS Allpupose cone adius/highfeed milling cutte fo countless finishing options uniwox plus cone adius / high feed millng cutte bodies Milling cutte bodies uniwox PLUS univesal cone adius and HIGHfeed
More informationDNFTR DIGITAL NO-FLOW TIMER U.S. PAT. NO. 5,835,372
MODEL PG-PS C -SWITCH GN-GND. VIO - OPEN - N.O. VIO - SHOT - N.C. -PG-PS MONITOS MOVEMENT OF DIVIDE VALVE PISTON FO DEPENDABLE "TIMED" SHUTDOWN POTECTION CLOSED LOOP O OPEN LOOP OPEATION INSTALLS DIECTLY
More informationNMBTC.COM / NMBTC.COM / NMBTC.COM /
Section 3 Metic Seies eaings MTC.COM / 818.341.3355 MTC.COM / 818.341.3355 MTC.COM / 818.341.3355 Stana metic seies aial beaings cay moeate aial an thust loas at low opeating toque an povie high pefomance
More informationSECTION 32 - PAD-MOUNTED CAPACITORS TABLE OF CONTENTS
. PAD-MOUNTED CAPACITOS PAD-MOUNTED CAPACITO PAD-MOUNTED CAPACITO.-A.-B. PAD-MOUNTED CAPACITO OPEATIONS PAD-MOUNTED CAPACITOS ENEGIZING PAD-MOUNTED CAPACITO DE-ENEGIZING PAD-MOUNTED CAPACITO PAD-MOUNTED
More informationtimken MiniatUre and thin-section bearings catalog
cylindical olle beaing catalog timken MiniatUe and thin-section beaings catalog Miniatue and thin-section eaings catalog index Timken Oveview......................................... 2 HOw TO USe THiS
More informationAnalysis of the Vane Contact Force and the Vane Side Friction Loss of the Various Revolving Vane Expander Designs
Pudue Univesity Pudue e-pubs ntenational Compesso Engineeing Confeence School of Mechanical Engineeing 010 Analysis of the Vane Contact Foce and the Vane Side Fiction Loss of the Vaious Revolving Vane
More informationArtisan Scientific is You~ Source for: Quality New and Certified-Used/Pre:-awned ECJuiflment
Looking fo moe infomation? Visit us on the we at http://www.atisan-scientific.com fo moe infomation: Pice Quotations Dives Technical Specifications. Manuals and Documentation Atisan Scientific is You~
More informationStraw Blower SB Parts Manual. Straw Blower
Straw Blower Parts Manual SB 4000 7/2014 2/2014 Table of Contents PATS SECTION Table of Contents Main Frame Assembly... Trailer Assembly... Blower Liner... Floor Chain Assembly... Conveyor Chain Assembly...
More informationQUICK REFERENCE LEVELING SYSTEM IDENTIFICATION MOTORIZED VEHICLES MANUAL LEVER CONTROLLED LEVELING SYSTEMS
COPOATI COPOATI COPOATI COPOATI COPOATI COPOATI u s f e e f u s s u e f QUICK EFEENCE ING SYSTEM IDENTIFICATI MOTOIZED VEHICLES MANUAL LEVE CTOLLED ING SYSTEMS 100 SEIES - Single lever control for each
More informationDrum Line. Technique Packet. Contents
01 Dum Line Technique Packet Contents Geneal Infomation Impotant Dates Clinic Days Additional Music equiements Expectations Positions in the Dum Line Technique Snae uads Cymbals Music s asic Stokes 5--9
More information2-3 COMPANY ROTORA: 2008 BRAKE GUIDE CIRCUIT BRAKER
2008 BAKE GUIDE 2-3 COMPANY FOUNDED IN 1999, OTOA IS A MAJO AFTEMAKET MANUFACTUE OF HIGH PEFOMANCE BAKING SYSTEMS AND COMPONENTS INCLUDING ACING CALIPES, BAKE DISCS, STAINLESS STEEL BAIDED BAKE HOSES AND
More informationSingle Row Deep Groove Ball Bearings
Single Row eep Goove all eaings Single Row eep Goove all eaings The single ow eep goove ball beaings have elatively eep aceways on both ings without a filling slot an ae non-sepaable. High loa atings ae
More informationOperating Instructions High-pressure pumps
MAXIMATOR HIGH PRESSURE TECHNOLOGY HYDRAULICS PNEUMATICS TESTING EQUIPMENT Opeating Instuctions High-pessue pumps issue 08.2007 MAXIMATOR GmbH Walkeniede Staße 15 D-37449 Zoge Gemany Telefon 0 55 86 /
More informationROBA -alphastop Electromagnetic Saftey Brake
Electomagnetic Saftey Bake www..com l Easy installation between moto and flange l Complete with backlash-fee coupling l Insulation class F, designed fo 100 % duty cycle P.897.V03.GB C US you eliable patne
More informationA small UAV deviation control roll research. Tianxiang Hu
Intenational Coneence on Manuactuing Science and Engineeing (ICMSE 2015) A small UAV deviation contol oll eseach Tianxiang Hu College o Mechatonic Engineeing, Nanjing Institute o Industy Technology, Nanjing
More informationFRICTION POTENTIAL AND SAFETY : PREDICTION OF
BRITE EURAM PROJECT BRPR CT97 0461 FRICTION POTENTIAL AND SAFETY : PREDICTION OF HANDLING BEHAVIOR FLORENCE, FEBRUARY 23 d 2001 Title : Guide Lines fo vehicle design Authos: P.I. Umbeto Delcao, CRF D.Ing.
More informationan ISO 9001: 2008 Registered Company NOVA WITHOUT AC CONTROL PANEL CONVERSION KIT OFF COLD DASH F L R DEF HOT
an ISO 9001: 2008 egistered Company 1969-72 NOVA WITHOUT AC CONTO PANE CONVESION KIT 474171 COD 904270 EV D 4/14/15, 1969-72 NOVA w/o AC CONTO PANE KIT PG 1 O 16 Table of Contents PAGES 1. 2.. 4. 5. 6.
More informationLZR TIMING BELT DRIVEN LINEAR MOTION MODULE
Technical Documentation LZ TIMING BELT DIVEN LINEA MOTION MODULE Each serial number is unique to that specific linear motion module and provides mk North America with complete order details. Your serial
More informationMIDDLE SECTION REPRESENTS "BLADE SIZE" (EXAMPLE: 24 = 24/32" [3/4"] 48 = 48/32" [1 1/2"]) REPRESENTS NUMBER OF BLADES PER 12" WIDE PANEL WG WB
HOW TO READ PRODUCT "SKU" : FIRST TWO LETTERS REPRESENT "PRODUCT TYPE" MIDDLE SECTION REPRESENTS "BLADE SIZE" (EXAMPLE: 24 = 24/32" [3/4"] 48 = 48/32" [1 1/2"]) REPRESENTS NUMBER OF BLADES PER 12" WIDE
More informationELECTRICAL SCHEMATIC FOR VAULT OIL MINDER SYSTEM STANCOR OIL MINDER SYSTEM CONTROLLER
9. VAULTS, GENEAL GENEAL EQUIMENTS FO VAULT OOMS GENEAL EQUIMENTS FO VAULT OOMS GENEAL EQUIMENTS FO VAULT OOMS 9.-A 9.-B 9.-C 9. VAULT ACCESS, LADDE, SUMP PUMP AND CONTOL FIXED LADDE FO VAULTS ALL ALUMINUM
More informationEND USE BASED MODEL FOR RESIDENTIAL POWER CONSUMPTION FORECASTING IN NAIROBI REGION, KENYA
END USE BASED MODEL FOR RESIDENTIAL POWER CONSUMPTION FORECASTING IN NAIROBI REGION, KENYA NAME: REG. NO. MARGARET KANINI NZIA F56/78274/2009 A Repot Submitted in Patial fulfillment of the equiements fo
More informationOPERATING INSTRUCTIONS WARRANTY CUSTOMER SERVICE
ASSEMBLY INSTRUCTIONS OPERATING INSTRUCTIONS WARRANTY CUSTOMER SERVICE -800-637-0005 WWW.EUROTECHSEATING.COM ASSEMBLY INSTRUCTIONS CHAIR NAME AND SKU OR MODEL Remove all items fom the caton. Veify all
More informationHYSTAR M16 3B 2.9(6.39) M22/M30* 5B 12.3(27.09) M24 8B 23.0(50.66) 250 (3,600) M16 2B 1.3(2.86) M16/M24* 3B 2.9(6.
-Pcwfictu hy *w #*/**» info@laanmachine.com www.laanmachine.com Specifications: Flow max. Pes. P max. Pilot Ratio Ipm ba P contol (PSI) /Pcyl. (USgpm) Flange bolts Numbe No. Dia. Pipe Size kg(lb) SVF-
More informationGESTRA Product Overview. The optimum components for every application
GESTRA Poduct Oveview The optimum components fo evey application Steam Taps Non-Retun-Valves BK Range Steam taps with egulato of DUO stainless steel up to PN 630. BK taps ae suited to the toughest opeating
More informationPart List ASSEMBLY INSTRUCTIONS FUZ5B-LO/FUZ6B-HI. Seat. Armrests. Star Base. Caster. Arm Bolts. Back Bolts (M8 X 15mm) J K.
ASSEMBLY INSTRUCTIONS FUZ5B-LO/FUZ6B-HI Pat List Key Desciption Pat Qty. Spae A FUZ5B-LO Backest B FUZ6B-HI Backest C Seat D Amests ( left & ight amest) 2 E Seat Post(Cylinde) F Sta Base G Caste 5 H Am
More informationCHAINS & BELTS PRODUCTION PROGRAM
CHAINS & BELTS PODUCTION POGAM STAIGHT BELTS SIDEFLEXING BELTS SIDEFLEXING CHAINBELTS 2 INCH PITCH ½ INCH PITCH 1 ¼ INCH PITCH 1 INCH PITCH Imperial width Metric width Metric width Metric width Metric
More informationmodel SP158.8 FEATURES & BENEFITS OPTIONS SPECIFICATIONS APPLICATIONS Freeze Valve For more information, visit or call (888)
model SP58.8 Freeze Valve FEATUES & BENEFITS OPTIONS For more information, visit www.hawsco.com or call (888) 640-4297. SPEIFIATIONS Model SP58.8, retro-fit freeze valve kit to replace the stainless steel
More informationGENREADY LOAD CENTER AND TRANSFER SWITCH
GENEADY LOAD CENTE AND TANSFE SWITCH DESCIPTION The Geneady load center is a hybrid panel that operates as a normal load center and also allows for seamless integration of standby generators. GENEADY LOAD
More informationOWNER'S / OPERATOR'S MANUAL
Woodbine, Iowa Made in America OWNE'S / OPEATO'S MANUAL Safety Information Warranty Information Operator's Instructions Maintenance Instructions Parts List r ve SEIES 750-1600 LB CAPACITY! Before installing
More informationOperator Manual. Zero Turn Mower /
Opeato Manual P-ZT 54 Zeo Tun Mowe / 966613403-02 Please ead the opeato manual caefully and make sue you undestand the instuctions befoe using the machine. EN Gasoline containing up to 10% ethanol (E10)
More informationOperator Manual. Zero Turn Mower /
Opeato Manual MZ 61 Zeo Tun Mowe / 967277501-01 Please ead the opeato manual caefully and make sue you undestand the instuctions befoe using the machine. Gasoline containing up to 10% ethanol (E10) is
More information