SUMMARY INFORMATION. MCC 12.0 RLA 8.6 LRA-Low * LRA-High 45.0 LRA-Half Winding * Med Volts 380 High Volts 420 Phase 3 Frequency 50 RPM *

Transcription

1 SUMMAY INFOMATION CM TFD Application: Air Conditioning efrigerant: -22 Copelaweld 50 Hz Production Status: Available for sale to all U.S. customers. Please check with your local Copeland representative for international availability. PEFOMANCE Cond. 1 Cond. 2 Evaporating ( F) Condensing ( F) eturn Gas ( F) Liquid Temperature ( F) Capacity (BTU/hr) Power (Watts) Current (Amps) EE (BTU/Hr-Watts) Mass Flow (lbs/hr) ELECTICAL MCC 12.0 LA 8.6 LA-Low * LA-High 45.0 LA-Half Winding * Med Volts 380 High Volts 420 Phase 3 Frequency 50 PM * UL File No. SA-2337 UL File Date 12/28/84 CSA File No. L3104C

2 STATING COMPONENTS Component Type Special Usage Part Number MOTO POTECTO Part Number Protector Type Internal Usage Description * Vendor T I Vendor Part Number 31HM4-54 MOTO POTECTO Part Number Protector Type Internal Usage Description * Vendor T I Vendor Part Number 31HM4-54 MOTO POTECTO Part Number Protector Type Internal Usage Description * Vendor T I Vendor Part Number 31HM4-54 MOTO STATO esistance Variance (±%) 7 Line to Line (ohms) Line to Wye (ohms) 0 MOTO STATO esistance Variance (±%) 7 Line to Line (ohms) 3.2 Line to Wye (ohms) 0

3 MOTO STATO esistance Variance (±%) 7 Line to Line (ohms) Line to Wye (ohms) 0 MECHANICAL STANDAD OVEALL DIMENSIONS Length (in) 9.44 Width (in) 9.28 Height (in) STANDAD MOUNTING DIMENSIONS Length (in) 7.5 Width (in) 7.5 Height (in) STANDAD SEVICE CONNECTIONS Suction Type (in) 7/8 ST Discharge Type (in) 1/2 ST SW:Sweat, FL:Flare, ST:Stub, K:otalock, FG:Flange OIL CHAGE Initial (fl oz) 55 echarge (fl oz) 51 TYPICAL WTS/SHIPPING Net Ship Weight (lbs) 77

4 4 7/32 7 1/2 3 15/16 D 3 3/4 3 7/16 3/8 1/2 To prevent possible breakage or blowout, sight glass must be protected during brazing operations. Pour eviter le bris ou l'eclatement du niveau visible, lc proteger pendant le brasage. Service sho trained pers follow these result in se Electrical power before all capacito Use this eq system only. Wear protec contains oil pressure. emove pres low side bef Use tubing compressor. efer to ap diagram. ep applicable, Use only ap lubricants in the manne Any others m could cause electrical s THIS PODUCT MAY BE COVEED BY , , , /16 7 1/4 4 3/8 A 7 1/8 8 3/4 B 9 9/32 E 3 1/2 SystemPro Dimensional Drawing D 8 MODEL NO. CM XXX CM3/CS33 A 15 5/16 7 B 15 11/16 C 7/8 D 15 1/4 6 E 13 1/ /4 3 3/4 7 1/2 4 3/4 DIAMETE HOLE 4-PLACES 3 2 ES NO. DUE TO ACCUMULATED ASSEMBLY TOLEANCES THE LISTED COMPONENTS MAY VAY FOM THE MOUNTING HOLES AS TABULATED. DISCHAGE TUBE ± SUCTION TUBE ± POCESS TUBE ± SPECIFICATIONS DESCIPTION D NOTES: 1. TOLEANCES TO BE ± UNLESS OTHEWISE SPECIFIED. 2. TUBE ENDS MUST BE PLUGGED. C C I.D. SUCTION COPPE TUBE WALL 25/ / /16 9 7/16 4 7/16 3/8 I.D. POCESS COPPE TUBE WALL (OPTIONAL SEE B/M) C B 1/2 I.D. DISCHAGE COPPE TUBE WALL WANING WAN CAUT B A OIL SIGHT GLASS (OPTIONAL SEE B/M) CANKCASE HEATE (OPTIONAL SEE B/M) THID ANGLE POJECTION ALLOWABLE TOLEANCES UNLESS OTHEWISE SPECIFIED ON THIS DAWING O IN COPELAND ENGINEEING SPECIFICATION FO MATEIAL AE AS FOLLOWS: 2-PLACES ± N/A 3-PLACES ± N/A ANGULA TOLEANCE ± N/A EVISION STATUS SHEET 9 OBS 9 EV NOTICE THIS DAWING AND THE INFOMATION CONTAINED HEEIN AE THE EXCLU- SIVE POPETY OF COPELAND. IT SHALL BE ETUNED TO COPELAND UPON DEMAND AND SHALL NOT BE E- PODUCED IN WHOLE O IN PAT, DISCLOSED TO ANYONE ELSE O USED WITHOUT THE WITTEN CONSENT OF COPELAND EDAWN, SEE SHEET 3 EG DEB ELEASE EG CHANGE NOTICE NO. BY EV. NO. EVISIONS DATE CHK'D MATEIAL DAWN BY CHECKED BY APPOVED BY SCALE SUPESEDES DWG. NO. E C G DEB SPECIFICATIONS DATE DATE DATE DATED EV. NO. DO NOT SCALE N/A THIS DAWING TITLE EF DWG-WELD COMP ASSM DAWING NUMBE SHEET 1 DWG 4 SIZE A Form No. 1.31DD-2404 Issued Copeland Corporation Printed in U.S.A.

5 ATING CONDITIONS 20 F Superheat 15 F Sub Cooling 95 F Ambient Air Over 50 Hz Operation CM PHASE HCFC-22 PLEASE NOTE: Compressor requires a minimum of 24 hours "run-in" to attain specified performance. CAPACITY (BTUH X 1000) CAPACITY Cond. Temp. ( F) Cond. Press. (PSIG) Evap. Temp. ( F) Evap. Press. (PSIG) CUENT (AMPS) Volts (Multiply by 1.7 for 220 V) Evap. Temp. ( F) Evap. Press. (PSIG) #2.12AC50HZ-666 Copeland Corporation Issued Sidney, Ohio

6 ATING CONDITIONS 20 F Superheat 15 F Sub Cooling 95 F Ambient Air Over 50 Hz Operation AI CONDITIONING CM PHASE COPELAWELD HCFC-22 COMPESSO 200/ TF5 380/ TFD Condensing CAPACITY (BTU/H) Evaporating Temperature 80 (26.7) (32.2) (37.8) (43.3) (48.9) (54.4) (60.0) (65.6) Condensing EE (BTU/WATT-H) Evaporating Temperature 80 (26.7) (32.2) (37.8) (43.3) (48.9) (54.4) (60.0) (65.6) Condensing POWE (WATTS) Evaporating Temperature 80 (26.7) (32.2) (37.8) (43.3) (48.9) (54.4) (60.0) (65.6) Condensing CUENT 380 Volts (Multiply by 1.7 for 220 V) 80 (26.7) (32.2) (37.8) (43.3) (48.9) (54.4) (60.0) (65.6) Condensing MASS FLOW (LBS/H) Evaporating Temperature 80 (26.7) (32.2) (37.8) (43.3) (48.9) (54.4) (60.0) (65.6) Nominal Performance Values (±5%) based on minimum 24 hours run-in. Subject to change without notice Copeland Corporation #2.12AC50HZ-666 Printed in U.S.A. Issued 08-99

7

8