TECHNICAL GUIDE. COOLING & HEAT PUMP MODELS: F2RP024 THRU Hz SINGLE PIECE AIR HANDLERS FOR USE WITH SPLIT-SYSTEM COOLING & HEAT PUMPS

Size: px

Start display at page:

Download "TECHNICAL GUIDE. COOLING & HEAT PUMP MODELS: F2RP024 THRU Hz SINGLE PIECE AIR HANDLERS FOR USE WITH SPLIT-SYSTEM COOLING & HEAT PUMPS"

Amanda Johnson
5 years ago
Views:

1 ev. A (1104) TECHNICAL GUIDE COOLING & HEAT PUMP S: F2P024 THU Hz SINGLE PIECE AI HANDLES FO USE WITH SPLIT-SYSTEM COOLING & HEAT PUMPS Due to continuous product improvement, specifications are subject to change without notice. Visit us on the web at for the most up-to-date technical information. DESCIPTION This fan coil unit provides the flexibility for installation in any upflow or horizontal application. These versatile models may be used for split-system cooling or heat pump operation. Compact cabinets along with return air options in both the upflow and horizontal positions allow this unit to fit into tight spaces such as attics, crawl spaces, and closets. NOTE: For matching condensing units and performance data, refer to condenser technical guides. FEATUES CABINET -The compact and sturdy cabinet is protected with a durable, attractive finish to prevent rust. The cabinet is also insulated to prevent cabinet sweating. BLOWES - Blowers are sized to circulate air both quietly and efficiently. The direct-drive, 3-speed motors provide a selection of air volume to match any application. Motor speeds may be selected via quick connect terminal at the motor. Slide-out blower/motor assemblies provide for easy servicing. COILS - Using the latest in heat transfer technology, the rifled tube coil/aluminum fin coils produce high performance ratings and provide long lasting quality. The coils are capable of bottom return air in the upflow position, and right or left end return air in the horizontal position. ELECTIC HEATES - s providing up to 25kw of heat are available as field installed accessories. Electric heaters are available in both single and three phase. EASY INSTALLATION - These fan coil units are designed to provide the lowest total installation cost. Accessible color coded control wiring, top and side power wiring knockouts, easy to install drain connections and electric heaters all combine to minimize installed cost on every job. CONTOL BOAD - The control board is equipped with low voltage terminal strips for easy installation. The control board is also equipped with plug-in receptacles for the auxiliary heaters. FO DISTIBUTION USE ONLY - NOT TO BE USED AT POINT OF ETAIL SALE

2 ev. A (1104) SHIPPING BACKET* EMOVE PIO TO INSTALLATION (2 SCEWS) J 10-3/8 F ALL DIMENSIONS AE IN INCHES. THEY AE SUBJECT TO CHANGE WITHOUT NOTICE. CETIFIED DIMENSIONS WILL BE POVIDED UPON EQUEST. 3/4 F 4-1/8 DAIN CONNECTIONS FO HOIZONTAL APPLICATIONS K 10-3/8 7-1/2 TOP VIEW (ALL S) 4 A =DAIN PAN FOOTPINT VAPO OPENING LIQUID OPENING D 3/4 MAX. FILTE LENGTH (21 INCHES) MAX. FILTE WIDTH (B MINUS 1-1/2 INCHES) EA 3/4 2 DAIN CONNECTIONS FO UPFLOW APPLICATIONS B C FILTE ACCESS E 18-3/8 BOTTOM VIEW DIMENSIONS Dimensions Wiring K.O.s 1 efrigerant Connections Line Size A B C J K D E F Liquid Vapor Height Width Depth Power Control F2P024(N,H) / /8 16-1/2 7/8 (1/2) 5/8 12-1/8 F2P036(N,H) /4 21-1/2 18-3/ /8 (1) 3/4 22 7/8 (1/2) 3/8 F2FP048(N,H) / /8 22-1/2 7/8 (1/2) 7/8 17-3/8 1-3/8 (1) F2FP060(N,H) / /8 27-1/2 1-23/32 (1-1/4) 7/8 1. Actual conduit size is shown in parenthesis. COIL DATA Application efrigeration STD. Face Fins Coil Deep Orifice Area Per Slabe Size Conn. Type ows Size (Sq. Ft.) Inch H W F2P024(N,H)93 A/C & HP F2P036(N,H)93 A/C & H/P Sweat F2FP048(N,H)93 A/C & H/P F2FP060(N,H)93 A/C & H/P Tube Geometry Tube Dia. Fin. Type Metering Device 1x.886 3/8 Enhanced Orifice 2 Unitary Products Group

3 ev. A (1104) COOLING CAPACITY BLOWE ATED CFM F2P024(N,H)93 830/1411 F2P036(N,H) /2124 F2P048(N,H) / /3145 ENTEING AI F (Dry/Wet Bulb) ENTEING AI C (Dry/Wet Bulb) UPFLOW / HOIZONTAL POSITIONS ONLY Evaporator Temperature and Corresponding Pressure C / PA ( F / PSIG) 1.7/ / / /584 35/ / / / /72 29/ /67 27/ /62 24/ /57 21/ /72 29/ /67 27/ /62 24/ /57 21/ /72 29/ /67 27/ /62 24/ /57 21/ /72 29/ /67 27/ /62 24/ /57 21/ ACCESSOIES efer to Price Manual for specific model numbers. VETICAL SUSPENSION KIT - The suspension kit is designed to be used with all sizes of blowers whenever the application requires vertical suspension of the unit. ELECTIC HEATES - s shown under Electrical Data include sequencers and temperature dual limit switches for safe, efficient operation. Circuit breakers are provided where shown. BOLT-ON THEMAL EXPANSION VALVE - TXV kits are available for enhanced efficiency. HOIZONTAL DAIN PAN - The drain pan kit is designed for field conversion to Horizontal left or right applications. Also available as factory installed option (horizontal right only). LIMITATIONS These units must be wired and installed in accordance with all national and local safety codes. Voltage limits are as follows: Normal Operating voltage ange Utilization range A in accordance with AI Std Air flow must be within the minimum and maximum limits approved for electric heat, evaporator coils and outdoor units: Entering Air Temperature Limits Wet Bulb Temp. C/ºF Dry Bulb Temp. C/ºF Min. Max. Min. Max. 14/57 22/72 18/65 35/95 Unitary Products Group 3

4 ev. A (1104) EXTENDED AI FLOW DATA 1 F2P024(N,H)93 F2P036(N,H)93 F2P048(N,H)93 BLOWE MOTO SPEED 240 Volts - 50 Hz CFM or M 3 External Static Pressure - IWG or Pa CFM M 3 /H CFM M 3 /H CFM M 3 /H CFM M 3 /H CFM M 3 /H High Med Low High Med Low High Med Low High Med Low Includes eturn Air Filter and Largest Electric Heater. EXTENDED AI FLOW DATA 1 F2P024(N,H)93 F2P036(N,H)93 F2P048(N,H)93 BLOWE MOTO SPEED 220 Volts - 50 Hz CFM or M 3 External Static Pressure - IWG or Pa CFM M 3 /H CFM M 3 /H CFM M 3 /H CFM M 3 /H CFM M 3 /H High Med Low High Med Low High Med Low High Med Low Includes eturn Air Filter and Largest Electric Heater. APPLICATION FACTOS-ATED CFM VS. ACTUAL CFM % Of ated Airflow 80% 90% ATED CFM 110% 120% CAPACITY FACTO Unitary Products Group

5 Physical and Electrical Data ev. A (1104) F2P024(N,H)93 F2P036(N,H)93 F2P048(N,H)93 Blower - Diameter x Width, MM (IN.) 254 x 152 (10 x 6) 254 x 2036 (10 x 8) 279 x 254 (11 x 10) 279 x 254 (11 x 10) Motor Voltage AMPS kw (HP) 0.19 (1/4) 0.37 (1/2) 0.37 (1/2) 0.56 (3/4) Nominal PM /240 (198 Min Max.) Full Load Locked otor Filter 1 Type Disposable/Permanent Size 16x20x1 20x21x1 22x21x1 22x21x1 Shipping/Operating Weight Kg. (lbs.) 42/44 (93/98) 49/52 (109/115) 64/67 (142/148) 68/70 (149/155) 1. Field Supplied. ELECTICAL DATA - Cooling Only with No Heat Power Kit (1 & 3 φ) Total Motor Amps Maximum Minimum Wire 220V 240V O.C.P.D. Size A.W.G. F2P024(N,H) F2P036(N,H) F2P048(N,H) ELECTICAL DATA - 1φ - 220/ F2P024(N,H)93 F2P036(N,H)93 F2P048(N,H)93 Heater or 1 as follows: 0 = No Breaker, 1 = Breaker. 2. See Conversion Table below: MAX. Total Heat 2 kw Staging STATIC & MIN. CFM kw MBH W1 Only W2 Only W1 + W2 Static Tap 220V 240V 220V 240V 220V 240V 220V 240V 220V 240V 2HK* B 0.5 LO HK* B 0.5 LO HK* B 0.5 LO HK* B 0.5 LO HK* B 0.5 LO HK* B 0.5 LO HK B 0.5 MED HK B 0.5 HI HK* B 0.5 LO HK* B 0.5 LO HK* B 0.5 LO HK B 0.5 LO HK B 0.5 LO HK B 0.5 LO HK* B 0.5 LO HK* B 0.5 LO HK* B 0.5 LO HK B 0.5 LO HK B 0.5 LO HK B 0.5 LO KW & MBH CONVESIONS - FO TOTAL POWE INPUT EQUIEMENT FO 208V 240V.751 OPEATION MULTIPLY TABULATED KW & MBH BY 230V 240V.918 Unitary Products Group 5

6 ev. A (1104) ELECTICAL DATA - 1φ (SINGLE SOUCE POWE SUPPLY) - COPPE WIE Heater Field Wiring Heater 1 Amps Min. Circuit Ampacity Max. O.C.P. 2 Amps/Type 75 C Wire Size - AWG 240V 220V 240V 220V 240V 220V 240V 2HK* B F2P024(N,H)93 2HK* B HK* B HK* B HK* B F2P036(N,H)93 2HK* B HK B HK B HK* B HK* B F2P048(N,H)93 2HK* B HK B HK B HK B /0 2HK* B HK* B HK* B HK B HK B HK B /0 1/ or 1 as follows: 0 = No Breaker, 1 = Breaker 2. OCP = Over current protection, HAC type circuit breaker or time delay fuse. ELECTICAL DATA - 1 φ (MULTI-SOUCE POWE SUPPLY) - COPPE WIE Min. Circuit Ampacity Max. Time Delay Fuse 75 C Wire Size - AWG Heater 220/240V 220/240V 220/240V 220/240V 220/240V 220/240V 220/240V 220/240V 220/240V Circuit Circuit Circuit 1st 2nd 3rd 1st 2nd 3rd 1st 2nd 3rd F2P036(N,H)93 F2P048(N,H)93 2HK B 27.0/ / /30 50/60-10/10 8/6-2HK B 38.9/ / /45 50/60-8/8 8/6-2HK B 27.1/ / /35 50/60-10/10 8/6-2HK B 51.0/ / /60 50/60-6/6 8/6-2HK B 27.1/ / / /30 50/60 50/60 10/10 8/6 8/6 2HK B 31.6/ / /35 50/60-8/8 8/6-2HK B 55.5/ / /60 50/60-6/6 8/6-2HK B 31.6/ / / /35 50/60 50/60 8/8 8/6 8/6 ELECTICAL DATA - 3 φ - 220/ Total Heat 1 Total Heat 1 KW Staging 2 Heater kw kw MBH W1 Only W2 Only W1 + W2 220V 240V 220V 240V 220V 240V 220V 240V 220V 240V 220V 240V F2P024(N,H)93 2HK B 0.5 LO F2P036(N,H)93 F2P048(N,H)93 2HK B 0.5 LO HK B 0.5 MED HK B 0.5 LO HK B 0.5 LO HK B 0.5 LO HK B 0.5 LO See Conversion Table page If first stage heat or 66 is connected to W 1, otherwise refer to Table at bottom of page11. 6 Unitary Products Group

7 ev. A (1104) ELECTICAL DATA - 3 φ - (SINGLE SOUCE POWESUPPLY) - COPPE WIE Field Wiring Heater s Min. Circuit Ampacity Max. O.C.P. 1 Amps/Type 75 C Wire Size - AWG 220V 240V 220V 240V 220V 240V F2P024(N,H)93 2HK B F2P036(N,H)93 2HK B HK B F2P048(N,H)93 2HK B HK B HK B HK B OCP = Over current protection, HAC type circuit breaker or time delay fuse. FIELD WIING CONNECTION - COOLING ONLY FIELD WIING CONNECTION - WITH HEATE KIT THEMOSTAT OUTDOO THEMOSTAT OUTDOO Y Y G G W W * FAN COIL Y G W2 W1 O C FAN COIL Y G W2 W1 O C *NOTEQUIEDON2O5KW FO KW & MBH CONVESIONS - FO TOTAL POWE INPUT EQUIEMENT 208V 240V.751 OPEATION, MULTIPLY TABULATED KW & MBH BY 230V 240V.918 **ALTENATE ELECTIC HEAT STAGING FO AUXILIAY HEAT DUING DEFOST Adjust values in Table above when used. Defrost Output (66) Heater Size (208 / 240 V) Connected To 7.5 KW 10-20KW 25KW W /5 3.8/5 W / /15 FIELD WIING CONNECTIONS - HEAT PUMP WITH HEATE KIT - F(2,3)P/F(2,3)FP FIELD INSTALLED JUMPE THEMOSTAT O LorX CorB Y G W ** T ** E OUTDOO O X B Y W 66 **TEMINALNOTAVAILABLE ONALLTHEMOSTATS FAN COIL Y G W2 W1 O C Unitary Products Group 7

8 TYPICAL INSTALLATION POWEWIING TOMAIN POWESOUCE SUPPLY AI POWEWIING CONTOL WIING EFIGEANT LINES THEMOSTAT TO CONDENSATE DAIN FILTE ACCESS LOUVEED ELECTICHOTWATEHEATE (Must complywithwaterheaterinstallationinstructions) TYPICAL APPLICATIONS UPFLOW HOIZONTAL IGHTHANDAPPLICATION LEFTHANDAPPLICATION Subject to change without notice. Printed in U.S.A ev. A (1104) Copyright by York International Corp All rights reserved. Supersedes: TG4YI (0600) Unitary 5005 Norman Products York OK Group Drive 73069

TECHNICAL GUIDE SINGLE PIECE AIR HANDLERS DESCRIPTION FEATURES YTG-A-0806

TECHNICAL GUIDE SINGLE PIECE AIR HANDLERS FOR USE WITH SPLIT-SYSTEM COOLING & HEAT PUMPS HEAT PUMP MODELS: F2RP/F2FP018 THRU 060 F3RP/F3FP018 THRU 060(T) FXRP024 THRU 060 COOLING MODELS F2RC/F2FC024 THRU