CHAINS & BELTS PRODUCTION PROGRAM

Size: px
Start display at page:

Download "CHAINS & BELTS PRODUCTION PROGRAM"

Transcription

1 CHAINS & BELTS PODUCTION POGAM STAIGHT BELTS SIDEFLEXING BELTS SIDEFLEXING CHAINBELTS 2 INCH PITCH ½ INCH PITCH 1 ¼ INCH PITCH 1 INCH PITCH Imperial width Metric width Metric width Metric width Metric width Flat top Flush grid Flat top Flush grid Page Page 179 Magnetic system 212 M Page Modular belts series Standard 2351 Page 176 series 225 M FT 8.7 thick Page 176 series 225 M FG 1 INCH PITCH Flush grid Page Modular belts series Heavy Duty Standard 2451 Page 177 series 226 M FT 8.7 thick Page Modular belts series Standard 2256 Page Modular belts series Small 2551 Page 177 series 225 TAB FT 8.7 thick Page Modular belts series Heavy Duty Small 2651 Page 178 series 2251 M FT 12.7 thick Page 178 series 2251 TAB FT 12.7 thick 14

2 L. SIDE FLEXING BELT -,5 INCH PITCH 212 M FLOFLEX K D= Sideflexing belt for magnetic system 8.5 This system offers a new and unique solution for sideflexing applications in plants with modular conveyors. Applications: To be used in the dry end of the line where bottles or cans run in lanes separated by guides. The short pitch makes in-line transfers possible. Standard length: 24 pitches (1 ft m) Pin material: Ferritic Stainless Steel Standard materials LFG Low Friction Acetal esin NGG New Generation On request and for adequate quantities these chains can be produced in: XPG PP AS Extra Performance Polypropylene Anti-static Acetal esin Belts - ef. Material idth L Max load inch min. capacity N LFG 212 M K LFG Dark Grey 25 XPG 212 M K XPG XPG Dark Brown/Grey NGG 212 M K NGG NGG Light Grey 21 eight Kg/m Standard length: 24 pitches (1 ft m) 179

3 2351 STANDAD SIDE FLEX BELTS ADIUS IDTH ATIO MIN NT version without TAB! width ratio min. 1.6 For left or right L- or U-turns Can also be used in S-curves Strong design Optimum product support Easy installation and maintenance For BELTS AVAILABLE IN LF material just add LF to part number (example code LF ) LFG LF PATENT PENDING Low Friction Acetal esin (standard material color Dark Grey) Low Friction Acetal esin (Color hite) On request and for adequate quantities these chains can be produced in: ITHOUT TAB ITH TAB BOTH SIDES XPG Extra Performance (special material color Dark Brown/Grey) NGG New Generation idth Belts ef. idth Belts ef. Side Flex radius minimum NT ST NT ST NT ST NT ST NT ST NT ST NT ST NT ST Max load capacity Straight N/mCurve N Back flex radius eight Kg/m Standard length: 96 pitches (1 ft m)

4 SIDE FLEX BELTS HEAVY DUTY 2451 ADIUS IDTH ATIO MIN width ratio min. 1.6 Heavy Duty extra strong design For left or right L- or U-turns Optimum combination of materials Optimum product support Easy installation and maintenance For BELTS AVAILABLE IN LF material just add LF to part number (example code LF ) LFG LF PATENT PENDING Low Friction Acetal esin (standard material color Dark Grey) Low Friction Acetal esin (Color hite) On request and for adequate quantities these chains can be produced in: XPG Extra Performance (special material color Dark Brown/Grey) NGG New Generation idth Belts ef. Side Flex radius minimum HDT HDT HDT HDT HDT HDT HDT Standard length: 96 pitches (1 ft m) Max load capacity Straight N/mCurve N Back flex radius eight Kg/m

5 SMALL ADIUS SIDE FLEX BELTS ADIUS IDTH ATIO MIN S version without TAB! width ratio min. 1. for tight curves For left or right L- or U-turns Strong design Optimum product support Easy installation and maintenance For BELTS AVAILABLE IN LF material just add LF to part number (example code LF ) LFG LF PATENT PENDING Low Friction Acetal esin (standard material color Dark Grey) Low Friction Acetal esin (Color hite) On request and for adequate quantities these chains can be produced in: ITHOUT TAB ITH TAB ONE SIDES XPG Extra Performance (special material color Dark Brown/Grey) NGG New Generation idth Belts ef. idth Belts ef. Side Flex radius minimum S ST S ST S ST S ST S ST S ST S ST Max load capacity Straight N/mCurve N Back flex radius eight Kg/m Standard length: 96 pitches (1 ft m)

6 SIDE FLEX BELTS HEAVY DUTY - SMALL ADIUS 2651 ADIUS IDTH ATIO MIN Heavy Duty extra strong design width ratio min. 1. for tight curves For left or right L- or U-turns Optimum combination of materials Optimum product support Easy installation and maintenance For BELTS AVAILABLE IN LF material just add LF to part number (example code 27433LF ) LFG LF PATENT PENDING Low Friction Acetal esin (standard material color Dark Grey) Low Friction Acetal esin (Color hite) On request and for adequate quantities these chains can be produced in: XPG Extra Performance (special material color Dark Brown/Grey) NGG New Generation idth Belts ef. Side Flex radius minimum HDST HDST HDST HDST HDST HDST Standard length: 96 pitches (1 ft m) Max load capacity Straight N/mCurve N Back flex radius eight Kg/m

7 CUVE GUIDE POFILES Bar caps e.g. 19S N Belt idth Min radius for 2351 Min radius for Material: Nolu-S Standard length: 3 meter CUVE GUIDE POFILES Bar caps e.g. 19S N Belt idth Min radius for 2451 Min radius for Material: Nolu-S Standard length: 3 meter without tab CUVE GUIDE POFILES 13.5 MBG - SUPPOT FO CHAIN AND BELTS ef Aluminum and Nolu-S guide rail for use in guiding the sides of selected plastic modular conveyor belts through turns. Minimum radius 457 (inside edge). eplaceable Nolu-S strips, light grey. Standard length: 3 meter STAINLESS STEEL T-HEAD SCE M8 Supply unit: 1 pieces 19S35-3M VG-MBG-5-NS-3M Insert eplacement 19S77-3M VG-PMBG-5-NS-3M ef. Standard length L 13S255VG-1568M S256 VG-1568M S258 VG-1568M-4 32 On request we can also supply complete compact curves according to your specifications.see example drawing. 188

8 882 TAB - LBP 882 TAB TAB VG CONE TACKS FO TAB CHAINS For chains, type see page: For plastic chains, type: 882 TAB 5 P A A F O CONE TACKS IN NOLU-S MATEIAL, JUST ADD NS TO PAT NUMBE. EXAMPLE CODE 1912NS Tracks Total width A Tab chains K45 pitch 12 = 61 = 65 = 8 = Tab chains K75 pitch 195 Tracks Total width A = 61 = 65 = 8 = 1 NO AVAILABLE IN NOLU-S MATEIAL! For further information see page Tab chains K1 pitch 26 Tracks Total width A = 61 = 65 = 8 = More tracks available on request. Material: UHM- PE, colour: black. Material: Nolu-S, colour: light grey. Supply: corner tracks are supplied complete with carry and return plates. Tracks Total width A Tab chains K12 pitch 31 = 61 = 65 = 8 =

9 SPOCKETS AND IDLE HEELS STEEL CHAINS: Series 812/ VG - 881M MINI - SK M 8157 TAB VG TAB O TAB 881O TAB TAB VG PLASTIC CHAINS: Series TAB TAB 879 M TAB - 88M BEVEL TAB 882M MULTIFLEX CHAINS CC6 - CC631 CC14 - CC1431 TAB ALL OU SPOCKETS AND IDLES OFFES: EXCELLENT EA AND CHEMICAL ESISTANCE STONG DESIGN: SPOCKETS ITH HIGH KEYAY STENGTH OPTIMUM SHAPE OF TEETH

10 IDLE HEELS 225 Note: Sprockets with single keyway can be used for belt widths up to 68 and temperature differences of maximum 3 C. For wider belts or bigger temperature differences, sprockets with square bores or round bore with double keyway have to be used S S DF +.5 DF +.5 Z C H S SPLIT IDLE HEELS STANDAD IDLE HEELS ø 18* ø 25 ø 3 ø 35 ø 4 ø 18* ø 25 ø 3 ø 35 ø GF 125F 1251F 1252F 1253F 1251GF 125IF 1251IF 1252IF 1253IF GF 1252F 12521F 12522F 12523F 12518GF 1252IF 12521IF 12522IF 12523IF GF 1254F 1255F 1256F 1257F 12512GF 1254IF 1255IF 1256IF 1257IF GF 1258F 1259F 1251F 12511F 12514GF 1258IF 1259IF 1251IF 12511IF GF 12512F 12513F 12514F 12515F 12516GF 12512IF 12513IF 12514IF 12515IF Material: polyamide, screws in stainless steel, Material: polyamide. *Plain Bore nuts in zinc plated steel. *Plain Bore SPOCKETS and IDLE HEELS 225 Note: Sprockets with single keyway can be used for belt widths up to 68 and temperature differences of maximum 3 C. For wider belts or bigger temperature differences, sprockets with square bores or round bore with double keyway have to be used. To order single keyway sprockets capable of floating freely on the shaft (i.e. bore tolerance DF /+.5), just add the letter P (=plus) to the existing part number. For example, code 12315P K +.2 DF P9 S T K +.2 DF +.5 S T Z B C H S SPLIT IDLE HEELS SINGLE KEYAY SPLIT IDLE HEELS DOUBLE KEYAY ø 3 ø 35 ø 4 ø 45 ø 3 ø 35 ø 4 ø Material: reinforced polyamide, screws in stainless steel, nuts in nickel plated brass 313

11 SPOCKETS and IDLE HEELS 225 (M-TAB) - 226M (M-TAB) Excellent wear and chemical resistance. einforced design. Completely closed structure, easier to clean and to disinfect The design of the sprocket ensures smooth running and long service life. Increased keyway strength K +.2 T +.2 S K +.2 S T DF P9 DF Z B C H S SPLIT SPOCKETS SPLIT SPOCKETS SINGLE KEYAY DOUBLE KEYAY ø 3 ø 35 ø 4 ø 45 ø 3 ø 35 ø 4 ø Material: reinforced polyamide, screws in stainless steel, nuts in nickel plated brass. S S SQ +.5 DF Z B C H S SPLIT SPOCKETS SPLIT IDLE HEELS SQUAE BOE - 3 x 3 4 x 4 - ø 3 ø 35 ø 4 ø Material: reinforced polyamide, screws in stainless steel, nuts in nickel plated brass. 319

SPROCKETS for belts series

SPROCKETS for belts series eite 1 von 7 PROKET for belts series PLIT PROKET INGLE KEYWAY Material: polyamide, screws in stainless steel. DIN 6885 key seat. Reduced noise level and quiet operation ompletely closed structure, easier

More information

CONVEYOR COMPONENTS CONVEYORS. All Belts are available in a variety of pitches and materials. FREEFAX:

CONVEYOR COMPONENTS CONVEYORS. All Belts are available in a variety of pitches and materials. FREEFAX: Freephone lines are open between 8.00am and 5.pm 0800 80 CONVEYOR COMPONENTS Moody have been appointed as a unichain distributor, and are able to offer the full range of unichain products. Chains are available

More information

TURNING DISK STEEL CHAINS:

TURNING DISK STEEL CHAINS: TURNING DISK STEEL CHAINS: Series 878TAB 324 327 MULTIFLEX CHAINS 328 331 878 TAB DRIVE AND IDLER DISK for sideflexing chains TANGENTIAL SPROCKETS Plain bore Ø 18.. 4 1 Ø18 Z B C M R 12817 32 337 32 29

More information

Extra Heavy Duty modular belts 2508 & 2630 Series

Extra Heavy Duty modular belts 2508 & 2630 Series Extra Heavy Duty modular belts 2508 & 2630 Series EMERSON. E CONSIDER IT SOLVED. APPLICATIONS Pictures by courtesy of Hohmeier Anlagenbau GmbH and Audi AG Ingolstadt - Germany 2508 HEAVY DUTY BELTS PATENT

More information

uni Flex SNB Sideflexing

uni Flex SNB Sideflexing uni Flex S 132 Pitch 25.4 (1.00 ) uni Flex S strong and tight radius sideflexing belt uni Flex S 1 pitch is created to optimize throughput in high volume operations with space limitations. The belt has

More information

Rexnord 1757 TAB TableTop Chain

Rexnord 1757 TAB TableTop Chain 1757 TAB DIRECTION OF TRAVEL Width Drawing Thickness 0.19 in (4.8 mm) 0.94 in (23.9 mm) Rexnord 1757 TAB TableTop Photo shows 1757 TAB TableTop molded in High Performance (HP ) material. Information Width

More information

Modular transfer plates with rollers

Modular transfer plates with rollers Modular transfer plates with rollers For heavy duty construction, and for bigger width please see page 328-330 Create a smooth transfer between two conveyors Can be used individually or back-to back Ultra

More information

1000-SERIES MODULAR BELTS

1000-SERIES MODULAR BELTS 1000-SERIES MODULAR BELTS The 1000-series belt is multifunctional. The pitch is 1 inch. BENEFITS Perfect product handling 1000-Series belts have a relatively small 1 pitch, the material has a very low

More information

FLEXBELTS BENEFITS PROGRAMME AND...

FLEXBELTS BENEFITS PROGRAMME AND... FLEXBELTS 505, 1255 and 7956 flexbelts are predominantly suitable for sideflexing transport of packages and clustered products, such as shrink-wrapped products and 4- and 6-packs. The 505 has a 0.5 inch

More information

FLEXBELTS BENEFITS PROGRAMME AND...

FLEXBELTS BENEFITS PROGRAMME AND... FLEXBELTS 505, 1255 and 7956 flexbelts are predominantly suitable for sideflexing transport of packages and clustered products, such as shrink-wrapped products and 4- and 6-packs. The 505 has a 0.5 inch

More information

Complementary accessories

Complementary accessories Complementary accessories - SPROCKETS - SHFTS - RETINER RINGS - MOTORDRIVES - STTIC NOSEBR - ROLLERS FOR FLEX ONE EWC - ROUND BR - FILL IN THE TECHNICL FORM C.002 C.004 C.005 C.007 C.008 C.008 C.009 C.010

More information

Rexnord FlatTop conveyor chains and components are leading edge solutions designed to continuously improve productivity for customers in every applica

Rexnord FlatTop conveyor chains and components are leading edge solutions designed to continuously improve productivity for customers in every applica FlatTop Catalog Download the most up-to-date version at www.rexnord.com TableTop and MatTop Products Issue 11 North America Rexnord FlatTop conveyor chains and components are leading edge solutions designed

More information

PRODUCT CATALOGUE 2006/2007 REXNORD / MCC FLATTOP EUROPE TABLETOP AND MATTOP CHAINS

PRODUCT CATALOGUE 2006/2007 REXNORD / MCC FLATTOP EUROPE TABLETOP AND MATTOP CHAINS PRODUCT CATALOGUE 2006/2007 REXNORD / MCC TABLETOP AND MATTOP CHAINS FLATTOP EUROPE INDEX PAGE COMPANY PROFILE 4 OVERVIEW TABLETOP CHAINS 6 INTRODUCTION STEEL SLATBAND CHAINS 8 STEEL SLATBAND CHAINS 10

More information

Rexnord TableTop Chains

Rexnord TableTop Chains Rexnord TableTop chains are engineered to satisfy a wide range of conveyor applications for virtually any industry. large selection of straight running and side-flexing chains are designed to convey flawlessly

More information

Download the most up-to-date version at KleanTop Belt Product Catalog

Download the most up-to-date version at   KleanTop Belt Product Catalog Download the most up-to-date version at www.rexnord.com/documentation KleanTop Belt Product Catalog Conveniently Accessible Online Information We realize the success of your business depends on up-to-date

More information

Series SK Straight running plastic chains

Series SK Straight running plastic chains Series 80-83 - SK 38-8 - 857 Straight running plastic chains 80 STRAIGHT RUI CHAIS RD=50 38. 38. 7..5 3.5 9.5 Ø 6.35. STRAIGHT RUI CHAIS Series 80 Applications: Food and beverage industry: Conveying lines

More information

Chain return components

Chain return components 42 HD Polyethylene High Density Self-lubricating ROLLER 12303V 12303N 12307V 12307N 128V 128N 128V 128N 12 12 Cod. 12304N Cod. 12303V Cod. 12863N ROLLER 12895V 12895N 12896V 12896N 12897V 12897N 12862V

More information

MATERIAL HANDLING SYSTEMS

MATERIAL HANDLING SYSTEMS MATERIAL HANDLING SYSTEMS Transport Systems MODULAR BELTS We specialized in custom design and development of high performance plastic components for material handling systems. SERIES PLA_00 SERIES PLA_030

More information

PRODUCT CATALOGUE REXNORD / MCC TABLETOP AND MATTOP CHAINS

PRODUCT CATALOGUE REXNORD / MCC TABLETOP AND MATTOP CHAINS PRODUCT CATALOGUE REXNORD / MCC ISSUE 12 TABLETOP AND MATTOP CHAINS FlatTop Europe NEW IN THIS CATALOGUE: FEATURES 2012 Combi-X New Magnetflex Curves FT 1055TAB-K450 Chainbelts NSH 1005 Split sprockets

More information

uni-chains Conveyor Chains

uni-chains Conveyor Chains s Conveyor Chains uarantee s guarantees for one year against defects caused by faults in design, production or material. 2002, s A/S. Copying or reproduction of this catalogue is prohibited without written

More information

uni Flex L-ASB Sideflexing

uni Flex L-ASB Sideflexing uni Flex LS 83 itch 50.8 (2.00 ) uni Flex LS his new generation of 2 pitch radius belts with or without hold down tabs offers a unique patenteddesign making this an extremely strong radius belt. version

More information

Series R/W ratio, minimum*** L-curves X X X X. Work load in curve [N]

Series R/W ratio, minimum*** L-curves X X X X. Work load in curve [N] Series 2351 2451 2551 2651 Name Standard Heavy Duty HD Small Radius SM HD-SM R/W ratio, minimum*** 1.6 1.6 1.0 1.0 S-curves X L-curves X X X X Work load in curve [N] 2500 3500 2500 3500 Load example 6x1.5

More information

DOUBLE HINGE MAX-LINE. page 12 SINGLE HINGE WITH THICK TOP PLATE. page 29 STEEL DOUBLE HINGE MAX-LINE. page 22 HEAVY DUTY. page 48 PLASTIC TOP PLATE

DOUBLE HINGE MAX-LINE. page 12 SINGLE HINGE WITH THICK TOP PLATE. page 29 STEEL DOUBLE HINGE MAX-LINE. page 22 HEAVY DUTY. page 48 PLASTIC TOP PLATE overview REXNoRD le Steel SINGLE HINGE SINGLE HINGE DOUBLE HINGE HEAVY DUTY SINGLE HINGE page 10 page 10, 11 page 12 page 12 page 13 S T R A I G H T Plastic Rubber Top lbp case conveyor SINGLE HINGE page

More information

Single action two way cross block

Single action two way cross block Connecting clamps Single action two way cross block SINGLE ACTION TWO WAY CROSS BLOCK PATENTED Feature: the special design provides a means for rapid adjustment of both vertical and horizontal side rail

More information

Rexnord 880 TAB TableTop Chain

Rexnord 880 TAB TableTop Chain 880 Drawing Rexnord 880 TableTop Min. Side-flex 1.63 in (41.4 mm) Overall (42.9 mm) Photo shows 880 TableTop molded in Low Friction (LF) material. Information Min. Side-flex pproximate 3 1/4 3.25 82.6

More information

TableTop and MatTop Products

TableTop and MatTop Products FlatTop Catalog Download the most up-to-date version at www.rexnord.com TableTop and MatTop Products Issue 15 Rexnord TableTop Chains Rexnord MatTop Chains Rexnord FlatTop conveyor chains and components

More information

FlatTop 7956 MatTop Chains Brochure. Rexnord 7956 Side-Flex MatTop Chains

FlatTop 7956 MatTop Chains Brochure. Rexnord 7956 Side-Flex MatTop Chains FlatTop 7956 MatTop Chains Brochure Rexnord 7956 Side-Flex MatTop Chains Rexnord 7956 Side-Flex MatTop Chains. Strong in Curves. Durable and Efficient. Rexnord is pleased to announce the introduction of

More information

May 2009 English Version Issue 3.0

May 2009 English Version Issue 3.0 S Y S T E M P L A S T E N G I N E E R I N G M A N U A L 05/09 ENG E N G I N E E R I N G M A N U A L May 2009 English Version Issue 3.0 ENGINEERING MANUAL Issue 3.0 - May 2009 - English version The information

More information

Extra Heavy Duty Modular Belts 2508 & 2630 Series

Extra Heavy Duty Modular Belts 2508 & 2630 Series Extra Heavy Duty Modular Belts 2508 & 2630 Series Applications Dual Strand Test Tunnel Sgle Strand Car Wash Individual Pushers Mount Easily On Belt Surface Pictures by courtesy of Hohmeier Anlagenbau GmbH

More information

May 2011 English Version Issue 3.6

May 2011 English Version Issue 3.6 E N G I N E E R I N G M A N U A L May 2011 English Version Issue 3.6 ENGINEERING MANUAL Issue 3.4 - April 2011 - English version APPLICATION CONSIDERATIONS. The proper selection and application of power

More information

Bottom view. (Nominal) L Pin: PP W PE W SS304 and SS316 POM-D/PA6.6 PP/PA6.6 PE/PA6.6 POM-D/PA6.6 PP/PA6.6 PE/PA6.6

Bottom view. (Nominal) L Pin: PP W PE W SS304 and SS316 POM-D/PA6.6 PP/PA6.6 PE/PA6.6 POM-D/PA6.6 PP/PA6.6 PE/PA6.6 Datasheet: uni O 4V C lastic Modular elt Series uni O 4V C Recommended belt material & color * OM-D Recommended pin and lock material & color Non standard material and color: See uni Material and Color

More information

T L. P (Nominal) L Belt weight (Belt/pin material) POM-LF/PA6.6 PP/PA6.6 POM-LF/PA6.6 PP/PA6.6

T L. P (Nominal) L Belt weight (Belt/pin material) POM-LF/PA6.6 PP/PA6.6 POM-LF/PA6.6 PP/PA6.6 Datasheet: uni Light 18% Plastic Modular elt Series uni Light 18% Recommended elt material & color Recommended Pin material & color POM-D W P6.6 Non standard material and color: See uni Material and Color

More information

uni Light EP (Nominal) L POM-D/PA6.6 PP/PA6.6 PE/PA6.6 POM-D/PA6.6 PP/PA6.6 PE/PA6.6

uni Light EP (Nominal) L POM-D/PA6.6 PP/PA6.6 PE/PA6.6 POM-D/PA6.6 PP/PA6.6 PE/PA6.6 Datasheet: uni Light E 8.5% lastic Modular Belt Serie uni Light E 8.5% Belt material & color in and lock material & color OM-D W Non standard material and color: See uni Material and Color Overview. Belt

More information

STRAIGHT RUNNING STEEL CHAINS SIDEFLEXING STEEL CHAINS 812/ L/815L 800/802/

STRAIGHT RUNNING STEEL CHAINS SIDEFLEXING STEEL CHAINS 812/ L/815L 800/802/ STAIHT UNNIN STEE CHAINS Series 812/815-812/815 800/802/805-8157 - 515 16 19 SIDEFEXIN STEE CHAINS Series 881-881O - 881 TAB - 881O TAB 881M - 881 MO - 881 MO - 8857M 8857 TAB - 1874 20 24 A OU STEE CHAINS

More information

N e W. modular plastic belts 7300 and 7200 series

N e W. modular plastic belts 7300 and 7200 series N e W REGINA Chain Products* are available from MARYLAND METRICS P.O. Box 26 Owings Mills, MD 27 USA ph: (40)358-330 (800)638-830 fx: (40)358-342 (800)872-9329 web: http://mdmetric.com email: sales@mdmetric.com

More information

T Z Y. 43% Open Tab Radius 2.2 X Z Y. mm in mm in mm in mm in

T Z Y. 43% Open Tab Radius 2.2 X Z Y. mm in mm in mm in mm in Datasheet: uni Flex AS lastic Modular elt Series uni Flex AS 43% Open Radius 1.6 43% Open Radius 2.2 43% Open Curved Surface Radius 2.2 V Sideflexing belt Nominal pitch: 25.4 mm (1.00 in) Surface type:

More information

Advised minimum width SLIDING ROLLERS SERIES 20

Advised minimum width SLIDING ROLLERS SERIES 20 Pitch Drive system Belt width Advised minimum width Rod diameter 20 mm Central Multiples of 8 mm 120 mm Ø 4.6 mm FLAT TOP FLUSH GRID RAISED RIB FRICTION TOP SLIDING ROLLERS TRIAN SERIES 20 SERIES 20 SERIES

More information

Finally all the action you were looking for!

Finally all the action you were looking for! Finally all the action you were looking for! System Plast presents an unprecedented range of products. Based on a long experience in the field, System Plast have worked hard on product development. Now

More information

Tailor Fit Accessories for Your Needs Ease of Automation & Guiding

Tailor Fit Accessories for Your Needs Ease of Automation & Guiding 7350 Series: STANDARD FEATURE OVERVIE Improve your bottom line results with industry leading speeds, best in class product transfers, and ease of automation. Tailor Fit Accessories for Your Needs Ease

More information

NEW. PLASTIC MODULAR CHAIN WT0705-W Plastic Top Chain

NEW. PLASTIC MODULAR CHAIN WT0705-W Plastic Top Chain NEW PLASTIC MODULAR CHAIN WT0705-W Plastic Top Chain A new 7.5 mm-pitch chain has been added to our lineup of plastic modular chains. Features of WT0705-W Plastic Modular Chain Knife-edge conveyor applications

More information

HabaCHAIN Slat and Conveyor Chains

HabaCHAIN Slat and Conveyor Chains Products Media No. 4185 Slat and Conveyor Chains Habasit Solutions in motion Product liability, application considerations If the proper selection and application of Habasit products are NOT recommended

More information

Modular Belts and Components for Nose Over Transfer

Modular Belts and Components for Nose Over Transfer Modular Belts and Components for Nose Over Transfer INDEX ABSTRACT End-to-end transfer description and general criticalities... 3 Regina solution to best tackle end-to-end transfer... 3 Regina ½ pitch

More information

Design Innovative, robust construction, straight section eliminated before and after curve. Features Speed: Up to 70 meters per minute

Design Innovative, robust construction, straight section eliminated before and after curve. Features Speed: Up to 70 meters per minute The new modular radius belt is available in different widths with a closed-top surface capable of handling a variety of package sizes, types and configurations including delicate products and applications

More information

Rex 880 TableTop Chain Side-flexing

Rex 880 TableTop Chain Side-flexing Prefix S D WD FR HP WHP LF WLF MR P DUV BWR PS WX 880 Cha Information Cha M. Sideflex pproximate desc /ft / m 31/4 3.2 6 18.00 47. 2 60 89 41/2 4.0 3 00 609. 6 70 1.04 Cha ntistatic Pla cetal Pla cetal

More information

PRODUCT CATALOGUE 2008/2009 REXNORD / MCC FLATTOP EUROPE PRODUCT CATALOGUE 2008/2009 REXNORD / MCC TABLETOP AND MATTOP CHAINS

PRODUCT CATALOGUE 2008/2009 REXNORD / MCC FLATTOP EUROPE PRODUCT CATALOGUE 2008/2009 REXNORD / MCC TABLETOP AND MATTOP CHAINS PRODUCT CATALOGUE 2008/2009 REXNORD / MCC TABLETOP AND MATTOP CHAINS 799.02.99 WORLDWIDE CUSTOMER SERVICE AUSTRALIA Rexnord Australia Pty. Ltd. Picton, New South Wales Phone: 61-2-4677-3811 Fax: 61-2-4677-3812

More information

Bottom view. (Nominal) L S Pin: PP W PE W SS304 and SS316 POM-D/PA6.6 PP/PA6.6 PE/PA6.6 POM-D/PA6.6 PP/PA6.6 PE/PA6.

Bottom view. (Nominal) L S Pin: PP W PE W SS304 and SS316 POM-D/PA6.6 PP/PA6.6 PE/PA6.6 POM-D/PA6.6 PP/PA6.6 PE/PA6. Datasheet: uni O 8 20% lastic Modular elt Series uni O 8 20% belt * OM-D pin and lock Non standard material and color: See uni Material and Color Overview. V L ottom view S (Nominal) Straight running belt

More information

Plastic Modular Belt. uni Flex SNB. Pitch 25.4 mm/1.00 in side flexing. Series

Plastic Modular Belt. uni Flex SNB. Pitch 25.4 mm/1.00 in side flexing. Series lastic Modular Belt Series uni Flex SNB uni Flex SNB C 1.6 uni Flex SNB C 2.3 uni Flex SNB W 2.3 Surface Opening: 55% Sideflexing belt Nominal pitch: 25.4 mm (1.00 in) Surface type: Flat Surface opening:

More information

Conveyors 12. slide strips roller Conveyors roller elements Conveyor rollers Chain Transfer

Conveyors 12. slide strips roller Conveyors roller elements Conveyor rollers Chain Transfer Conveyors slide strips roller Conveyors roller elements Conveyor rollers Chain Transfer Application example conveyors Transport solutions and goods provision 1 2 3 4 5 6 7 8 362 9 1 slide strips Low-wear

More information

COMPANY PROFILE. ...dedication to constant skills improvement, keeping up to date with the latest technical developments and passion for innovation...

COMPANY PROFILE. ...dedication to constant skills improvement, keeping up to date with the latest technical developments and passion for innovation... COMPANY PROFILE Welcome to our Bluebelt profile page, and thank you for taking the time to read about us. Our company was founded in 1999 by Christopher Dale, and over the past 12 years has become a leading

More information

Ammeraal Beltech Modular

Ammeraal Beltech Modular Ammeraal Beltech Modular Innovative belt and chain solutions for every industry & application www.unichains.com Content Q2 updates - Chains page 4 Q2 updates - Straight Running Belts page 5 Q2 updates

More information

MicroSpan. Chain. Chain. revised SpanTech LLC

MicroSpan. Chain. Chain. revised SpanTech LLC Chain MicroSpan Chain 1 27 SpanTech LLC Contents Overview... 3 MicroSpan Chain Types... 3 The Nose Bar... 6 Chain Fabrication... 8 Chain Widths... 8 MicroSpan Sprockets... 9 Standard Split Sprocket...

More information

T L POM-LF/PP PP/PP PA6/PBT-GR POM-LF/PP PP/PP PA6/PBT-GR

T L POM-LF/PP PP/PP PA6/PBT-GR POM-LF/PP PP/PP PA6/PBT-GR Datasheet: uni Light C Plastic Modular elt Series uni Light C elt material & color POM-LF R PP W PP P6 Pin and lock material & color PP W PP W PP Non standard material and color: See uni Material and Color

More information

2011 E M E R S O N. C O N S I D E R I T S O L V E D.TM

2011 E M E R S O N. C O N S I D E R I T S O L V E D.TM Conveyor Components June 11 E M E R S O N. CO N S I D E R I T S O LV E D. TM Via Guareschi, 2 Via San Giuseppe, 54 Quality and Service Your expectation, our standard. Customers expect the best from SystemPlast;

More information

C O N V E Y O R B E L T S

C O N V E Y O R B E L T S CONVEYOR BELTS GENERAL INDEX INFO....................................................... 3-9 Why Eurobelt Product Range Materials INFO SERIES 20.................................................. 10-23

More information

300mm Conveyor System

300mm Conveyor System 300mm Conveyor System FlexMove Product Catalogue 281 SERIES Variety of chain types suitable for wide range of applications either horizontal or vertically product transportation. The maximum product width

More information

ASHWORTH ENGINEERING Committed to on-time delivery of defect-free products and services, fit for use, exactly as promised, every time.

ASHWORTH ENGINEERING Committed to on-time delivery of defect-free products and services, fit for use, exactly as promised, every time. ASHWORTH ENGINEERING Committed to on-time delivery of defect-free products and services, fit for use, exactly as promised, every time. PRODUCT TECHNICAL BULLETIN Reduced Radius Omni-Pro 100 USA and International

More information

Agricultural Chain ISO 487/DIN 8189 and Works Standard

Agricultural Chain ISO 487/DIN 8189 and Works Standard ISO 487/DIN 8189 and Works Standard 1 ISO 487 Connecting Links ISO STD Extra Pitch Pitch Inside Over Roller Pin Bush Over Plate Minimum Weight No No No No No No Strength Inch mm Width Inner Dia Dia Dia

More information

7956 Series MatTop Chains Design Manual Series MatTop Chains

7956 Series MatTop Chains Design Manual Series MatTop Chains 7956 Series MatTop Chains Design Manual 7956 Series MatTop Chains 1 Contents Safety Considerations/Introduction...2-3 Chain Selection - Selection Criteria...4 - Specifying and Part Number Nomenclature...5

More information

EXCERPT FROM PROLINK ENGINEERING MANUAL SERIES 14. siegling prolink modular belts. 11/17 (Ref-No. 888) Straight running belts Pitch 12.7 mm (0.

EXCERPT FROM PROLINK ENGINEERING MANUAL SERIES 14. siegling prolink modular belts. 11/17 (Ref-No. 888) Straight running belts Pitch 12.7 mm (0. EXCERPT FROM PROLINK ENGINEERING MANUAL 11/17 (Ref-No. 888) SERIES 14 Straight running belts Pitch 12.7 (0.50 in) Forbo Siegling GmbH Lilienthalstraße 6/8, D-30179 Hannover Phone +49 511 6704 0, Fax +49

More information

MatTop Chains. Overview Rexnord MatTop Chains. Solid Top Chains Hybrid. Perforated Top Chains 6391T. RubberTop Chains

MatTop Chains. Overview Rexnord MatTop Chains. Solid Top Chains Hybrid. Perforated Top Chains 6391T. RubberTop Chains MatTop Chains Solid Top Chains 1000 1005 1010 2000 2015 3125 5935 6300 6995 6995 Hybrid 7700 8505 Perforated Top Chains 500 1000 2000 2016 5936 6391T 7706 8506 Overview Rexnord MatTop Chains RubberTop

More information

Plastic Modular Belt. uni Flex SNB PITCH 25.4 MM/1.00 IN SIDE FLEXING. Series

Plastic Modular Belt. uni Flex SNB PITCH 25.4 MM/1.00 IN SIDE FLEXING. Series lastic Modular Belt Series uni Flex SNB uni Flex SNB C 1.6 uni Flex SNB C 2.3 uni Flex SNB W 2.3 Surface Opening: 55% Sideflexing belt Nominal pitch: 25.4 mm (1.00 in) Surface type: Flat Surface opening:

More information

2250 FT FLAT TOP BELTS (Pitch mm)

2250 FT FLAT TOP BELTS (Pitch mm) 220 FT FLAT TOP BELTS (Pitch 1-2.4 ) 8 2.4 4.3 Version standard Backflex radius: 2 Max load capacity: 2.000 N/m eight: 9.30 Kg/m 2 FOR BELTS AVAILABLE IN MATERIAL JUST ADD TO PART NUMBER (EXAMPLE CODE

More information

Omni-Pro 075. USA and International Patents Pending

Omni-Pro 075. USA and International Patents Pending ASHWORTH ENGINEERING Committed to on-time delivery of defect-free products and services, fit for use, exactly as promised, every time. P R O D U C T T E C H N I C A L B U L L E T I N Omni-Pro 075 USA and

More information

P R O D U C T T E C H N I C A L B U L L E T I N

P R O D U C T T E C H N I C A L B U L L E T I N ASHWORTH ENGINEERING Committed to on-time delivery of defect-free products and services, fit for use, exactly as promised, every time. P R O D U C T T E C H N I C A L B U L L E T I N OMNI-FLEX 3 X 1 FLAT

More information

Multi-Conveyor LLC. Your best, conveyed better. Quick Ship Conveyors Catalog. Quality. Quick Delivery. Value

Multi-Conveyor LLC. Your best, conveyed better. Quick Ship Conveyors Catalog. Quality. Quick Delivery. Value Multi-Conveyor LLC Your best, conveyed better. S uccess L ine Quick Ship Conveyors Catalog Quality Quick Delivery Value 25 Windustrial Road PO Box 10 Winneconne, Wisconsin 54986 Phone (920) 582-7960 Fax

More information

T L. (Nominal) L S POM-LF/PA6.6 PP/PA6.6 PA6/PBT-GR POM-LF/PA6.6 PP/PA6.6 PA6/PBT-GR

T L. (Nominal) L S POM-LF/PA6.6 PP/PA6.6 PA6/PBT-GR POM-LF/PA6.6 PP/PA6.6 PA6/PBT-GR Datasheet: uni Light Plastic Modular elt Series uni Light Recommended elt material & color Recommended Pin material & color POM-D W P6.6 Non standard material and color: See uni Material and Color Overview.

More information

ROLLERS SERIES 3500 Fixed drive conveyor roller. ROLLERS SERIES 3500 Fixed drive conveyor roller. Technical data

ROLLERS SERIES 3500 Fixed drive conveyor roller. ROLLERS SERIES 3500 Fixed drive conveyor roller. Technical data Application area Driven unit handling conveying, such as transport of cardboards, containers, barrels or tires. Low-noise The use of polyamide drive heads results in very quiet running. Lateral loading

More information

150mm Conveyor System

150mm Conveyor System 150mm Conveyor System FlexMove Product Catalogue 231 Variety of chain type suitable for wide range of applications either horizontal or vertically product transportation. Capacity higher than FK, FS, FM.

More information

6990 Series Hybrid MatTop Chain Product Brochure. Rexnord 6990 Series Hybrid MatTop Chain

6990 Series Hybrid MatTop Chain Product Brochure. Rexnord 6990 Series Hybrid MatTop Chain 6990 Series Hybrid MatTop Chain Product Brochure Rexnord 6990 Series Hybrid MatTop Chain Breakthrough Automotive Solution Count on Rexnord 6990 Series Hybrid MatTop Chain to support you in your automotive

More information

6990 Series Hybrid MatTop Chain Product Brochure. Rexnord 6990 Series Hybrid MatTop Chain

6990 Series Hybrid MatTop Chain Product Brochure. Rexnord 6990 Series Hybrid MatTop Chain 6990 Series Hybrid MatTop Chain Product Brochure Rexnord 6990 Series Hybrid MatTop Chain Breakthrough Automotive Solution Count on Rexnord 6990 Series Hybrid MatTop Chain to support you in your automotive

More information

Stainless steel systems

Stainless steel systems Stainless steel systems Copyright FlexLink 2014 The contents of this publication are the copyright of the publishers and may not be reproduced (even extracts) unless permission is granted. Every care has

More information

Conveyor chain catalogue

Conveyor chain catalogue Conveyor chain catalogue www.renold.com Table of Contents Section - Conveyor Products and Dimensions Conveyor chain introduction....................................................................5-7 BS

More information

Rex 881 TableTop Chain Side-flexing

Rex 881 TableTop Chain Side-flexing Prefix S SS 881 Cha Information Cha M. Side-flex pproximate Weight desc /ft / m 3-1/4 3.25 82. 6 18.00 7. 2 2.00 2.97 4-1/2 4. 1 3 00 609. 6 2. 3.71 7-1/2 7. 19 5 00 609. 6 3.70 5.49 Cha Carbon Staless

More information

1625B-TAB Conveyor Design Manual. 1625B-TAB Series MatTop Chain

1625B-TAB Conveyor Design Manual. 1625B-TAB Series MatTop Chain 1625B-TAB Conveyor Design Manual 1625B-TAB Series MatTop Chain Contents Safety Considerations/Introduction... 2 Chain Selection... 4 Carry Section Wearstrips... 8 Return Section Wearstrips... 11 Drive

More information

Rex 812 TableTop Chain with Rubber Inserts Straight Running

Rex 812 TableTop Chain with Rubber Inserts Straight Running Prefix SSR 812 Cha is shown Staless Steel with Rubber Insert (SSR) material. Cha Information Cha M. Side-flex Radius Approximate desc /ft / m 3-1/4 82. 6 - - 1.89 2.80 Cha Material Staless Steel with Rubber

More information

Ballscrews / Linear Guideway General Catalog

Ballscrews / Linear Guideway General Catalog Ballscrews / inear Guideway General Catalog inear Guideway 2 Introduction of ach Series 2. eavy oad Type, MSA Series A. Construction Upper Retainer Carriage nd Seal nd Cap Rail Grease Nipple Ball 45 ower

More information

From a modest beginning in 1976 producing small. quantities of gravity conveyor rollers, Arnott Handling

From a modest beginning in 1976 producing small. quantities of gravity conveyor rollers, Arnott Handling ARNOTT HANDLING LTD From a modest beginning in 1976 producing small quantities of gravity conveyor rollers, Arnott Handling Equipment Limited has grown to become one of the United Kingdom s foremost manufacturers

More information

Conveyor System ML2 ML2-1 MS2 MM3 ML2 MX2 DS2 DM3 DL2 DX2

Conveyor System ML2 ML2-1 MS2 MM3 ML2 MX2 DS2 DM3 DL2 DX2 Conveyor System Description 140mm width thermoplastic chain with aluminium frame conveyor system. Also available with stainless steel frame, please refer section. Examples of application industries Personal

More information

Applications - Levelling of machine bases or constructions - Boards, partitions, enclosures - Tables, conveyors and work benches

Applications - Levelling of machine bases or constructions - Boards, partitions, enclosures - Tables, conveyors and work benches FEET PA 00.0 076/ 0 - PA, grey - Anti-skid insert NBR - All bolts are suitable for all plates Applications - Levelling of machine bases or constructions - Boards, partitions, enclosures - Tables, conveyors

More information

Features. Engineered for Small Part. Compact Frame & Drives. Small Roller Diameter. Pinch Drive Design (patent pending) Clean Room Certified

Features. Engineered for Small Part. Compact Frame & Drives. Small Roller Diameter. Pinch Drive Design (patent pending) Clean Room Certified Innovative Design Engineered for Small Part Handling / Transfer FDA Approved Belting (low, medium & high friction) Optional 5/16" Nose Bar on one or both ends (Actual Size) Features Compact Frame & Drives

More information

Quality from The Cutting Edge of Fabrication

Quality from The Cutting Edge of Fabrication Quality from The Cutting Edge of Fabrication TABLE OF CONTENTS PUNCH HOLDES - - - - - - - - - - - - - - - - - - - - - - - - - - 3 PUNCHES - - - - - - - - - - - - - - - - - - - - - - - - - - 4 DIES - -

More information

Stainless steel guide rail brackets

Stainless steel guide rail brackets guide rail brackets Reinforced polyamide PATENT FEATURE Par. # 6,189,685 Par. # 6,543,608 Par. # 6,669,009 (USA) STAINLESS STEEL BRACKETS WITH LIP, EYEBOLT AND KNOB Ø Material: body in stainless steel,

More information

Rexnord 6990 Series Hybrid MatTop Chain Product Brochure. Rexnord 6990 Series Hybrid MatTop Chain

Rexnord 6990 Series Hybrid MatTop Chain Product Brochure. Rexnord 6990 Series Hybrid MatTop Chain Rexnord 6990 Series Hybrid MatTop Chain Product Brochure Rexnord 6990 Series Hybrid MatTop Chain Automotive Solution Breakthrough 6990 Series H4 Hybrid MatTop Chain Rexnord 6990 Series Hybrid H4 MatTop

More information

STRAIGHT RUNNING PLASTIC CHAINS with friction surface. SIDEFLEXING PLASTIC CHAINS with high friction surface 831 VG VG VG 54 55

STRAIGHT RUNNING PLASTIC CHAINS with friction surface. SIDEFLEXING PLASTIC CHAINS with high friction surface 831 VG VG VG 54 55 STRAIGHT RUNNING PASTIC CHAINS with friction surface Series 8 VG - 82 VG - 8257 VG 54 55 SIDEFEXING PASTIC CHAINS with high friction surface Series 878 TAB VG - 879 TAB VG - 879 M VG 882 TAB VG - 882 M

More information

FS SERIES. FS Series Characteristic Beam Width: 65mm Product Width: Refer to Guide Rail Assembly

FS SERIES. FS Series Characteristic Beam Width: 65mm Product Width: Refer to Guide Rail Assembly SERIES Variety of chain types suitable for wide range of applications either horizontal or vertically product transportation. The maximum product width to be conveyed can be referred to guide rail assembly

More information

STRAIGHT RUNNING CHAINS with low noise accumulation rollers. SIDEFLEXING CHAINS with low noise accumulation rollers LBP LBP LBP

STRAIGHT RUNNING CHAINS with low noise accumulation rollers. SIDEFLEXING CHAINS with low noise accumulation rollers LBP LBP LBP SIGH UNNING CHINS with low noise accumulation rollers Series BP 821 - BP 8257 - BP 831 46 48 SIDFXING CHINS with low noise accumulation rollers Series BP 878 B - BP 879 M BP 882 B - BP 882 M 49 52 PPICION:

More information

PROLINK ENGINEERING MANUAL

PROLINK ENGINEERING MANUAL EXCERPT FROM PROLINK ENGINEERING MANUAL 01/19 (Ref-No. 888) SERIES 3 Straight running belts Pitch 50 mm (1.97 in) Forbo Siegling GmbH Lilienthalstraße 6/8, D-30179 Hannover Phone +49 511 6704 0 www.forbo-siegling.com,

More information

Ammeraal Beltech Modular

Ammeraal Beltech Modular Ammeraal Beltech Modular Innovative belt and chain solutions for every industry & application www.unichains.com Content uni Guide Rings page 3-4 uni Retainer Rings page 5-6 uni Idler page 7-8 atasheet:

More information

Dynamic O-Ring Sealing

Dynamic O-Ring Sealing Handbook 5.31.2 lands for Industrial eciprocating Seals Design Chart 5-2 provides a reasonable basis for calculating reciprocating O-ring seal glands. Design Table 5-2, which follows it, contains recommended

More information

3.25, 4.5, 7.5 Tabletop Conveyor Specifications

3.25, 4.5, 7.5 Tabletop Conveyor Specifications 3.25, 4.5, 7.5 Tabletop Conveyor Specifications Complete Conveyor Systems and Equipment Conveyor Specifications Frame Material Thickness Material Finish Design 12 GA Mild steel Stardust Silver" powder

More information

uni MPB Straight running

uni MPB Straight running 88 itch 50.8 (2.00 ) the most cleanable modular belt in the world he belt is the most cleanable, 2 pitch, straight running modular belt in the world and the belt holds the valid SF/USDA approvals. he belt

More information

EXCERPT FROM PROLINK ENGINEERING MANUAL SERIES 13. siegling prolink modular belts. 12/17 (Ref-No. 888) Straight running belts Pitch 8 mm (0.

EXCERPT FROM PROLINK ENGINEERING MANUAL SERIES 13. siegling prolink modular belts. 12/17 (Ref-No. 888) Straight running belts Pitch 8 mm (0. EXCERPT FROM PROLINK ENGINEERING MANUAL 12/17 (Ref-No. 888) SERIES 13 Straight running belts Pitch 8 (0.31 in) Forbo Siegling GmbH Lilienthalstraße 6/8, D-30179 Hannover Phone +49 511 6704 0, Fax +49 511

More information

Modular plastic belt conveyor WL

Modular plastic belt conveyor WL Modular plastic belt conveyor WL Contents System information...389 Conveyor sections...390 Belts introduction...391 Belts...392 Accessories for use with Friction top belt...392 Conveyor frame components

More information

FC SERIES. FC Series Characteristic Beam Width: 105mm Product Width: Refer to Guide Rail Assembly

FC SERIES. FC Series Characteristic Beam Width: 105mm Product Width: Refer to Guide Rail Assembly Variety of chain type suitable for wide range of applications either horizontal or vertically product transportation. Capacity higher than FK, FS, FM. The maximum product width to be conveyed can be referred

More information

MAGNETIC CLUTCHES & COUPLINGS

MAGNETIC CLUTCHES & COUPLINGS MGEIC CLUCHE & COUPLIG PPLICIO EXMPLE UWID EIO COOL Brake mounted on shaft of unwind spool or bobbin. Brake Film PHOE:.. FX:.. WWW.DP-I.COM Full diameter = mm Empty core diameter = mm verage tension =

More information

P R O D U C T T E C H N I C A L B U L L E T I N

P R O D U C T T E C H N I C A L B U L L E T I N ASHWORTH ENGINEERING Committed to on-time delivery of defect-free products and services, fit for use, exactly as promised, every time. P R O D U C T T E C H N I C A L B U L L E T I N USA and International

More information

(Nominal) L Belt weight (Belt/pin material)

(Nominal) L Belt weight (Belt/pin material) N lastic Modular elt Serie uni M-TT 37% elt material & color W OM-D W in material & color W 6.6 lternative pin material: 6.6 W elt width ermissible tensile force (Nominal) L T Straight Running Nominal

More information

POM-DI/PP PP/PP PE-I/PE POM-DI/PP PP/PP PE-I/PE

POM-DI/PP PP/PP PE-I/PE POM-DI/PP PP/PP PE-I/PE Datasheet: uni M C EN lastic Modular elt Series uni M C L T Straight running belt Nominal pitch: 50.8 mm (2.00 in) Surface type: Flat Surface opening: Closed ackflex radius: 65.0 mm (2.6 in) in diameter:

More information

Bringing Component Parts Together

Bringing Component Parts Together Bringing Component Parts Together About Concentric International Concentric International connects retail, wholesale and original equipment manufacturers (OEM) with the value of global sourcing for products

More information

uni Light EP (Nominal) L POM-D/PA6.6 PP/PA6.6 PE/PA6.6 POM-D/PA6.6 PP/PA6.6 PE/PA6.6

uni Light EP (Nominal) L POM-D/PA6.6 PP/PA6.6 PE/PA6.6 POM-D/PA6.6 PP/PA6.6 PE/PA6.6 Datasheet: uni Light E 28% lastic Modular Belt Serie uni Light E 28% Belt material & color in and lock material & color OM-D W Non standard material and color: See uni Material and Color Overview. Belt

More information