Q TABLE PREVIOUS PAGE F OF CONTENTS NEXT PAGE

Transcription

1 TABLE F OF CONTENTS FINDEX A-Z

2 TABLE F OF CONTENTS F TABLE OF CONTENTS INDEX A-Z PEFIX TABLE OF CONTENTS GENEAL INFOMATION TEMS ALPHABETICAL INDEX I PESS-LOC THUMB SCEW KNOBS PAGES - 4 PAGE 3 4 II XII - TIC PAGES 49 - SCEWS, BOLTS, AND THEADED OD PAGES 5-3 PAGE TELEPHONE: (870) 453- / micro plastics, inc. FAX: (870)

3 TABLE F OF CONTENTS F TABLE OF CONTENTS INDEX A-Z COMPANY POFILE INSET BETWEEN PAGES 4 AND 5 ETUN EPLY CAD INSET BETWEEN PAGES 4 AND 5 CHANICAL TEST DATA UNC/UNF CHANICAL TEST DATA TIC PEFIX SCEWS, BOLTS, AND THEADED OD PAGES 5-3 II PAGE , mpsales@microplastics.com micro plastics, inc. WEBSITE: 3

4 TABLE F OF CONTENTS F TABLE OF CONTENTS INDEX A-Z PEFIX TABLE OF CONTENTS GENEAL INFOMATION TEMS ALPHABETICAL INDEX III UNIVESAL NUTS PAGES 37-4 XIII - TIC PAGES - PAGE 39, IV XIV - TIC PAGE 3 WASHES, SHOULDE WASHES AND SCEW INSULATOS PAGES 4 - PAGE TELEPHONE: (870) 453- / micro plastics, inc. FAX: (870)

5 TABLE F OF CONTENTS F TABLE OF CONTENTS INDEX A-Z COMPANY POFILE INSET BETWEEN PAGES 4 AND 5 ETUN EPLY CAD INSET BETWEEN PAGES 4 AND 5 CHANICAL TEST DATA UNC/UNF CHANICAL TEST DATA TIC PEFIX XV - TIC PAGE 4 SPACES PAGES 7-83 V PAGE PANEL FASTENES AND HOLE PLUGS PAGES VI PAGE mpsales@microplastics.com micro plastics, inc. WEBSITE: 5

6 TABLE F OF CONTENTS F TABLE OF CONTENTS INDEX A-Z PEFIX TABLE OF CONTENTS GENEAL INFOMATION TEMS ALPHABETICAL INDEX VI PANEL FASTENES AND HOLE PLUGS PAGES PAGE TELEPHONE: (870) 453- / micro plastics, inc. FAX: (870)

7 TABLE F OF CONTENTS F TABLE OF CONTENTS INDEX A-Z COMPANY POFILE INSET BETWEEN PAGES 4 AND 5 ETUN EPLY CAD INSET BETWEEN PAGES 4 AND 5 CHANICAL TEST DATA UNC/UNF CHANICAL TEST DATA TIC PEFIX WIE HANDLING HADWAE AND ACCESSOIES PAGES 04-7 VII PAGE mpsales@microplastics.com micro plastics, inc. WEBSITE: 7

8 TABLE F OF CONTENTS F TABLE OF CONTENTS INDEX A-Z PEFIX TABLE OF CONTENTS GENEAL INFOMATION TEMS ALPHABETICAL INDEX VII WIE HANDLING HADWAE AND ACCESSOIES PAGES 04-7 PAGE , TELEPHONE: (870) 453- / micro plastics, inc. FAX: (870)

9 TABLE F OF CONTENTS F TABLE OF CONTENTS INDEX A-Z COMPANY POFILE INSET BETWEEN PAGES 4 AND 5 ETUN EPLY CAD INSET BETWEEN PAGES 4 AND 5 CHANICAL TEST DATA UNC/UNF CHANICAL TEST DATA TIC PEFIX CICUIT BOAD HADWAE PAGES 8-37 VIII PAGE mpsales@microplastics.com micro plastics, inc. WEBSITE: 9

10 TABLE F OF CONTENTS F TABLE OF CONTENTS INDEX A-Z PEFIX TABLE OF CONTENTS GENEAL INFOMATION TEMS ALPHABETICAL INDEX VIII CICUIT BOAD HADWAE PAGES 8-37 PAGE IX HOSE CLAMPS AND INSTALLATION TOOLS PAGE 38, 39 PAGE TELEPHONE: (870) 453- / micro plastics, inc. FAX: (870)

11 TABLE F OF CONTENTS F TABLE OF CONTENTS INDEX A-Z COMPANY POFILE INSET BETWEEN PAGES 4 AND 5 ETUN EPLY CAD INSET BETWEEN PAGES 4 AND 5 CHANICAL TEST DATA UNC/UNF CHANICAL TEST DATA TIC PEFIX CABLE TIES AND MOUNTING HADWAE PAGES 40-4 X PAGE XVI - TIC PAGE 5 FASTENE ASSOTNTS PAGES XI PAGE mpsales@microplastics.com micro plastics, inc. WEBSITE:

12 I Q TABLE F OF CONTENTS F PESS-LOC THUMB SCEW KNOBS PLASTIC HEADS AE MOLDED ONTO ZINC PLATED STEEL ALLOY SOCKET HEAD CAP SCEWS. INDEX A-Z WING HEAD - KNOBS PESSES ONTO ANY STD. SOCKET HEX CAP SCEW. ITEM SPECIFICATIONS NUMBE FITS SCEW W T D 9W00 #0 " " 7/" 9W04-7/4" /3" 7/3" 9W5 5/ -" 3/3" " 9W038-5/3" 3/4" 47/4" TOLEANCES +/-.03 WING HEAD - SCEW MOLDED ONTO ZINC PLATED STEEL ALLOY SOCKET HEAD CAP SCEW. ITEM NUMBE SCEW SIZE SCEW LENGTH HEAD DIA. 9W00S " " 9W00S " " 9W00S " " 9W00S " " 9W00S " " 9W04S050 " -" 9W04S075 " -" 9W04S00 " -" 9W04S50 -" -" 9W5S050 5/-8 " -" 9W5S075 5/-8 " -" 9W5S00 5/-8 " -" 9W5S50 5/-8 -" -" 9W038S075 - " -" 9W038S00 - " -" 9WO38S50 - -" -" COLO CODES MUST BE INCLUDED WITH THE ITEM NUMBE WHEN ODEING! B - BLACK D - ED WT - WHITE BL - BLUE G - GEEN FLOWEETTE - KNOBS PESSES ONTO ANY STD. SOCKET HEX CAP SCEW. TOLEANCES +/-.03 ITEM SPECIFICATIONS NUMBE FITS SCEW T D 9F04 " " 9F5 5/ " 9/3" 9F038 " 45/4" FLOWEETTE - SCEW MOLDED ONTO ZINC PLATED STEEL ALLOY SOCKET HEAD CAP SCEW. ITEM NUMBE SCEW SIZE SCEW LENGTH HEAD DIA. 9F04S050 " -" 9F04S075 " -" 9F04S00 " -" 9F04S50 -" -" 9F5S050 5/-8 " -" 9F5S075 5/-8 " -" 9F5S00 5/-8 " -" 9F5S50 5/-8 -" -" 9F038S075 - " -" 9F038S00 - " -" 9F038S50 - -" -" TELEPHONE: (870) 453- / micro plastics, inc. FAX: (870)

13 STANDAD - OUND HEAD - KNOB PESSES ONTO ANY STD. SOCKET HEX CAP SCEW. ITEM SPECIFICATIONS NUMBE FITS SCEW A B C 9004 #4 5/" /4" 9/3" 900 # " 3/4" /4" 9008 #8 " 7/3" " 900 #0 /3" " 7/4" 947 " 5/" " 94 " /4" " 95 5/ " 5/4" 9/3" TOLEANCES +/-.03 F OF CONTENTS F INDEX A-Z PESS-LOC THUMB SCEW KNOBS TABLE TIC - OUND HEAD - KNOB PESSES ONTO ANY STD. SOCKET HEX CAP SCEW. I ITEM SPECIFICATIONS NUMBE FITS SCEW A B C 9M300 M 3 9,53 5, 8,33 9M400 M 4,70 5,5 9,53 9M500 M 5,0,35 0,7 9M00 M 9,05 7,93,70 9M0 M 5,40 8,33,70 9M80 M 8 5,40 9,9 5,08 TOLEANCES +/-.03 OUND HEAD DAWING FO: STANDAD HEAD DIA. TIC HEAD DIA. 5/" THOUGH " 9,53 THOUGH 9,05 STANDAD - OUND HEAD - SCEW MOLDED ONTO ZINC PLATED STEEL ALLOY SOCKET HEAD CAP SCEW. ITEM NUMBE SCEW SIZE SCEW LENGTH HEAD DIA. 9004S " 5/" 9004S " 5/" 9004S " 5/" 900S05-3 " " 900S050-3 " " 900S075-3 " " 9008S " " 9008S " " 9008S " " 9008S " " 900S " " 900S " " 900S " " 900S " " 900S " " 947S050 " " 947S075 " " 947S00 " " 947S50 -" " 94S050 " " 94S075 " " 94S00 " " 94S50 -" " 95S050 5/-8 " " 95S075 5/-8 " " 95S00 5/-8 " " 95S50 5/-8 -" " NOTE: PESS LOC THUMB SCEWS AE DESIGNED TO BE HAND TIGHTENED. OUND HEAD DAWING FO: STANDAD HEAD DIA. TIC HEAD DIA. " 5,40 TIC - OUND HEAD - SCEW MOLDED ONTO ZINC PLATED STEEL ALLOY SOCKET HEAD CAP SCEW. ITEM NUMBE SCEW SIZE SCEW LENGTH HEAD DIA. 9M M 3 M 8 9,53 9M M 3 M 0 9,53 9M M 3 M 9,53 9M M 3 M 9,53 9M M 4 M 0,70 9M M 4 M,70 9M M 4 M,70 9M M 4 M 0,70 9M M 4 M 5,70 9M M 5 M.0 9M M 5 M.0 9M M 5 M 0.0 9M M 5 M 5.0 9M M 5 M M0000 M M 9,05 9M0000 M M 9,05 9M00000 M M 0 9,05 9M00005 M M 5 9,05 9M M M 40 9,05 9M000 M M 5,40 9M000 M M 5,40 9M0000 M M 0 5,40 9M0005 M M 5 5,40 9M00040 M M 40 5,40 9M8050 M 8 M 5,40 9M8050 M 8 M 5,40 9M80500 M 8 M 0 5,40 9M80505 M 8 M 5 5,40 9M M 8 M 40 5,40 mpsales@microplastics.com micro plastics, inc. WEBSITE: 3

14 TABLE F OF CONTENTS F INDEX A-Z PESS-LOC THUMB SCEW KNOB ASSOTNT KITS I FLOWEETTE 44 PIECE WING 3 PIECE OUND 704 PIECE OUND 380 PIECE ASSOTNT CONSISTS OF APPOX: 48 - " 48-5/" 48 - " ASSOTNT CONSISTS OF APPOX: 7 - " 78-5/" 7 - " 90 - #0 ASSOTNT CONSISTS OF APPOX: 0-5/" 0 - X " 00 - X " 00 - # # # 00 - # 4 ASSOTNT CONSISTS OF APPOX: 40-5/" 40 - X " 75 - X " 75 - # # # 50 - # 4 Assorted Colors O4ASO44FPL Assorted Colors Assorted Colors Assorted Colors O4ASO3WPL O4ASO704PL O4ASO380PL EASY TO ASSEMBLE INSTANT THUMB SCEWS.... MICO PLASTICS' PESS-LOC THUMB SCEW KNOBS CAN BE ASSEMBLED TO THE APPOPIATE SIZE SOCK- ET HEXAGON HEAD CAP SCEW IN VAIOUS WAYS DE- PENDING ON THE VOLU OF PATS TO BE ASSEM- BLED. SIMPLY ALIGN THE SOCKET CAP SCEW WITH THE MATCHING COUNTEBOE POVIDED IN THE PESS-LOC KNOB, PLACE THIS ASSEMBLY BETWEEN THE CLAMPING JAWS OF THE ASSEMBLY DEVICE AND POVIDE ENOUGH FOCE TO PESS THE KNOB COM- PLETELY OVE THE HEAD OF THE SCEW. ANY DEVICE THAT POVIDES A POSITIVE CLAMPING FOCE, SUCH AS A BENCH VISE, ABO PESS, O EVEN VISE GIP TYPE PLIES, FO SMALL QUANTITIES WILL PEFOM THE ASSEMBLY. A SMALL OF THIN CADBOAD O SMOOTH PLASTIC PLACED BETWEEN THE TOP SUFACE OF THE PESS-LOC KNOB AND THE CLAMPING JAW IS ECOENDED TO PEVENT MAING OF THE KNOB SUFACE. 4 TELEPHONE: (870) 453- / micro plastics, inc. FAX: (870)

15 TABLE F OF CONTENTS F INDEX A-Z SCEWS, BOLTS, AND THEADED OD POTECT INSULATE ISOLATE The shear strength of heat-treated steel. The Dielectric insulation, corrosion resistance and vibration resistance of nylon. II OUND - CODE "" Thread Size Head diameter Head height A perfect combination to replace: *costly brass and stainless steel fasteners. *costly multiple component insulated screw assemblies. *costly sleeved and cladded screws. *marginal standard nylon fastener applications. Metal Core Screws are recommended in applications requiring electrical, thermal and vibration insulation in shear or double shear connections. These reinforced screws will provide up to 4 times strength of standard nylon fasteners. OUND WASHE - CODE "W" Thread Size Head diameter Head height Washer thickness Washer diameter NYLON SHELL Nylon Natural High dielectric resistance Corrosion resistant Vibration, abrasion resistant EINFOCING COE *High strength, high carbon C.H.Q. steel. *Precision cold formed and knurled. *Electro zinc or cadmium plated. The reinforcing core incorporates a recessed metal head that permits tightening with high speed, high torque automatic drives. Due to the corrosion resistant nature of the nylon, the Metal core Screws can, in certain applications, replace expensive stainless steel, brass and Monel fasteners at a substantial cost savings. FILLISTE - CODE "F" Thread Size Head diameter Head height FLAT - CODE "A" Thread Size Head diameter Head height The insulating quality of the nylon shell makes the Metal Core Screws an ideal choice for areas where cathodic or thermal transfer is a problem. ITEM NUMBE SIZE DESCIPTION (,35) Metal Core (9,53) Metal Core (,70) Metal Core (9,53) Metal Core (,70) Metal Core (9,53) Metal Core (,70) Metal Core (9,05) Metal Core (5,40) Metal Core (9,53) Metal Core (,70) Metal Core (5,88) Metal Core (9,05) Metal Core (5,40) Metal Core TIC SIZES AVAILABLE ON APPLICATION NOTE: SPECIFY HEAD STYLE CODE LETTE. EXAMPLE: X " OUND HEAD= MAX TOQUE TENSILE TEST DOUBLE SHEA SIZE BEFOE ULTIMATE YIELD BEAK YIELD BEAK DEFOMATION TOQUE LBS. LBS. LBS. LBS. In. Lbs..5 In. Lbs In. Lbs. 4 In. Lbs In. Lbs. In. Lbs In. Lbs. 3 In. Lbs mpsales@microplastics.com micro plastics, inc. WEBSITE: 5

16 TABLE F OF CONTENTS F INDEX A-Z SCEWS, BOLTS, AND THEADED OD II BINDE SLOTTED HEADSTYLE PAT NUMBE THEAD LENGTH 00B009 00B0 00B05 00B08 00B05 00B08 00B03 00B037 00B039 00B043 00B050 00B05 00B0 00B075 00B087 00B00 00B 004B08 004B B050 00B009 00B0 00B04 00B08 00B05 00B08 00B03 00B037 00B043 00B050 00B05 00B0 00B08 00B075 00B087 00B00 00B 00B8 00B /3 /8 5/3 3/ 9/3 5/ 5/4 7/ 9/ 7/8 /8 3/ 3/3 /8 9/4 3/ 9/3 5/ 7/ 9/ / 7/8 /8 3/ THEAD SIZE A H J T Nominal Screw Size Nominal Screw Length Up to in., incl Over to in., incl Over to in., incl Over in. Tolerance on Length PAT NUMBE THEAD LENGTH PAT NUMBE THEAD LENGTH PAT NUMBE THEAD LENGTH 00B37 00B50 00B 00B B05 00B009 00B0 00B05 00B08 00B05 00B03 00B037 00B043 00B050 00B05 00B0 00B08 00B075 00B087 00B00 00B 00B5 00B50 00B 00B75 00B87 00B00 00B5 0040B B B B00 00B0 00B08 00B05 00B08 00B03 00B037 00B /3 /8 5/3 3/ 5/ 7/ 9/ / 7/8 /8 7/8 /8 3/ 9/3 5/ 7/ 00B050 00B0 00B075 00B087 00B00 00B 00B5 00B37 00B50 00B75 00B87 00B00 0B0 0B08 0B05 0B03 0B037 0B050 0B0 0B075 0B00 0B5 0B50 0B0 0B08 0B05 0B03 0B037 0B043 0B050 0B0 0B075 0B08 0B087 0B00 0B0 0B5 0B50 0B75 7/8 /8 7/8 /8 3/ 5/ /8 3/ 5/ 7/ 3/ 7/8 -/ 0B00 050B05 050B03 050B B B0 050B B B00 050B5 050B50 050B75 050B00 050B50 058B08 058B05 058B B0 058B B / 7/8 3/ 0000 thru thru thru TELEPHONE: (870) 453- / micro plastics, inc. FAX: (870)

17 TABLE F OF CONTENTS F INDEX A-Z SCEWS, BOLTS, AND THEADED OD II FILLISTE SLOTTED HEADSTYLE PAT NUMBE THEAD LENGTH 00F009 00F0 00F05 00F08 00F05 00F08 00F03 00F037 00F039 00F043 00F050 00F05 00F0 00F075 00F087 00F00 00F 004F08 004F F F F F F F F F F F050 00F009 00F0 00F04 00F08 00F05 00F08 00F03 00F037 00F043 00F /3 /8 5/3 3/ 9/3 5/ 5/4 7/ 9/ 7/8 /8 3/ /8 3/ 5/ 7/ 5/ 3/3 /8 9/4 3/ 9/3 5/ 7/ THEAD SIZE A H J T Nominal Screw Size Nominal Screw Length Up to in., incl Over to in., incl Over to in., incl Over in. Tolerance on Length PAT NUMBE THEAD LENGTH PAT NUMBE THEAD LENGTH PAT NUMBE THEAD LENGTH 00F05 00F0 00F08 00F075 00F087 00F00 00F 00F8 00F5 00F37 00F50 00F 00F F F037 00F009 00F0 00F05 00F08 00F05 00F03 00F037 00F043 00F050 00F05 00F0 00F08 00F075 00F087 00F00 00F 00F5 00F50 00F 00F75 00F87 00F00 00F5 0040F / / 7/8 /8 3/ 3/3 /8 5/3 3/ 5/ 7/ 9/ / 7/8 /8 7/8 0040F F F00 00F0 00F08 00F05 00F08 00F03 00F037 00F043 00F050 00F0 00F075 00F087 00F00 00F 00F5 00F37 00F50 00F75 00F87 00F00 0F0 0F08 0F05 0F03 0F037 0F050 0F0 0F075 0F00 0F5 0F50 0F0 0F08 0F05 0F03 0F037 0F /8 3/ 9/3 5/ 7/ 7/8 /8 7/8 /8 3/ 5/ /8 3/ 5/ 7/ 0F050 0F0 0F075 0F08 0F087 0F00 0F0 0F5 0F50 0F75 0F00 050F05 050F03 050F F F0 050F F F00 050F5 050F50 050F75 050F00 050F50 058F08 058F05 058F F0 058F F / 7/8 / 5/ 7/8 3/ 0000 thru thru thru mpsales@microplastics.com micro plastics, inc. WEBSITE: 7

18 TABLE OF CONTENTS F INDEX A-Z SCEWS, BOLTS, AND THEADED OD II HEX SLOTTED HEADSTYLE PAT NUMBE THEAD LENGTH 00X009 00X0 00X05 00X08 00X05 00X08 00X03 00X037 00X039 00X043 00X050 00X05 00X0 00X075 00X087 00X00 00X 004X08 004X X050 00X009 00X0 00X04 00X08 00X05 00X08 00X03 00X037 00X043 00X050 00X05 00X0 00X08 00X075 00X087 00X00 00X 00X8 00X /3 /8 5/3 3/ 9/3 5/ 5/4 7/ 9/ 7/ 8 /8 3/ 3/3 /8 9/4 3/ 9/3 5/ 7/ 9/ / 7/8 /8 3/ THEAD SIZE A W H J T MIN.0 MIN.7 MIN.7 MIN.340 MIN.340 MIN.409 MIN Nominal Screw Size Nominal Screw Length Up to in., incl Over to in., incl Over to in., incl Over in. Tolerance on Length PAT NUMBE THEAD LENGTH PAT NUMBE THEAD LENGTH PAT NUMBE THEAD LENGTH 00X37 00X50 00X 00X X05 00X009 00X0 00X05 00X08 00X05 00X03 00X037 00X043 00X050 00X05 00X0 00X08 00X075 00X087 00X00 00X 00X5 00X50 00X 00X75 00X87 00X00 00X5 0040X X X X00 00X0 00X08 00X05 00X08 00X03 00X037 00X /3 /8 5/3 3/ 5/ 7/ 9/ / 7/8 /8 7/8 /8 3/ 9/3 5/ 7/ 00X050 00X0 00X075 00X087 00X00 00X 00X5 00X37 00X50 00X75 00X87 00X00 0X0 0X08 0X05 0X03 0X037 0X050 0X0 0X075 0X00 0X5 0X50 0X0 0X08 0X05 0X03 0X037 0X043 0X050 0X0 0X075 0X08 0X087 0X00 0X0 0X5 0X50 0X75 7/8 /8 7/8 /8 3/ 5/ /8 3/ 5/ 7/ 3/ 7/8 / 0X00 050X05 050X03 050X X X0 050X X X00 050X5 050X50 050X75 050X00 050X50 058X08 058X05 058X X X0 058X X / 7/8 3/ 0000 thru thru thru TELEPHONE: (870) 453- / micro plastics, inc. FAX: (870)

19 TABLE OF CONTENTS F INDEX A-Z SCEWS, BOLTS, AND THEADED OD II HEX UNSLOTTED HEADSTYLE PAT NUMBE THEAD LENGTH 00H009 00H0 00H05 00H08 00H05 00H08 00H03 00H037 00H039 00H043 00H050 00H05 00H0 00H075 00H087 00H00 00H 004H08 004H H H H H H H H H H H050 00H009 00H0 00H04 00H08 00H05 00H08 00H03 00H037 00H043 00H /3 /8 5/3 3/ 9/3 5/ 5/4 7/ 9/ 7/8 /8 3/ /8 3/ 5/ 7/ 5/ 3/3 /8 9/4 3/ 9/3 5/ 7/ THEAD SIZE A W H min..0 min..0 min..7 min..7 min..340 min..340 min..409 min Nominal Screw Size Nominal Screw Length Up to in., incl Over to in., incl Over to in., incl Over in. Tolerance on Length PAT NUMBE THEAD LENGTH PAT NUMBE THEAD LENGTH PAT NUMBE THEAD LENGTH 00H05 00H0 00H08 00H075 00H087 00H00 00H 00H8 00H5 00H37 00H50 00H 00H H05 00H009 00H0 00H05 00H08 00H05 00H03 00H037 00H043 00H050 00H05 00H0 00H08 00H075 00H087 00H00 00H 00H5 00H50 00H 00H75 00H87 00H00 00H5 0040H H / / 7/8 /8 3/ 3/3 /8 5/3 3/ 5/ 7/ 9/ / 7/8 /8 7/8 0040H H00 00H0 00H08 00H05 00H08 00H03 00H037 00H043 00H050 00H0 00H075 00H087 00H00 00H 00H5 00H37 00H50 00H75 00H87 00H00 0H0 0H08 0H05 0H03 0H037 0H050 0H0 0H075 0H00 0H5 0H50 0H0 0H08 0H05 0H03 0H037 0H043 0H /8 3/ 9/3 5/ 7/ 7/8 /8 7/8 /8 3/ 5/ /8 3/ 5/ 7/ 0H0 0H075 0H08 0H087 0H00 0H0 0H5 0H50 0H75 0H00 050H05 050H03 050H H H0 050H H H00 050H5 050H50 050H75 050H00 050H50 058H08 058H05 058H H0 058H H / 7/8 / 5/ 7/8 3/ mpsales@microplastics.com micro plastics, inc. WEBSITE: thru thru thru

20 TABLE F OF CONTENTS F INDEX A-Z SCEWS, BOLTS, AND THEADED OD II PAN SLOTTED HEADSTYLE PAT NUMBE THEAD LENGTH 004P05 004P P05 007P050 00P00 00P009 00P0 00P05 00P08 00P05 00P08 00P03 00P037 00P039 00P043 00P050 00P05 00P0 00P075 00P087 00P00 00P 004P08 004P P050 00P009 00P0 00P04 00P08 00P05 00P08 00P03 00P037 00P043 00P050 00P05 00P0 00P08 00P / 3/3 /8 5/3 3/ 9/3 5/ 5/4 7/ 9/ 7/8 /8 3/ 3/3 /8 9/4 3/ 9/3 5/ 7/ 9/ / THEAD SIZE A H J T / Nominal Screw Size Nominal Screw Length Up to in., incl Over to in., incl Over to in., incl Over in. Tolerance on Length PAT NUMBE THEAD LENGTH PAT NUMBE THEAD LENGTH PAT NUMBE THEAD LENGTH 00P087 00P00 00P 00P8 00P5 00P37 00P50 00P 00P P05 00P009 00P0 00P05 00P08 00P05 00P03 00P037 00P043 00P050 00P05 00P0 00P08 00P075 00P087 00P00 00P 00P5 00P50 00P 00P75 00P87 00P00 00P5 0040P P P P00 00P0 00P /8 /8 3/ 3/3 /8 5/3 3/ 5/ 7/ 9/ / 7/8 /8 7/8 /8 3/ 00P05 00P08 00P03 00P037 00P043 00P050 00P0 00P075 00P087 00P00 00P 00P5 00P37 00P50 00P75 00P87 00P00 0P0 0P08 0P05 0P03 0P037 0P050 0P0 0P075 0P00 0P5 0P50 0P0 0P08 0P05 0P03 0P037 0P043 0P050 0P0 0P075 0P08 0P087 9/3 5/ 7/ 7/8 /8 7/8 /8 3/ 5/ /8 3/ 5/ 7/ 3/ 7/8 0P00 0P0 0P5 0P50 0P75 0P00 050P05 050P03 050P P P0 050P P P00 050P5 050P50 050P75 050P00 050P50 058P08 058P05 058P P0 058P P00 038P /-8 / 5/ 7/8 3/ 7/ thru thru thru TELEPHONE: (870) 453- / micro plastics, inc. FAX: (870)

21 TABLE F OF CONTENTS F INDEX A-Z SCEWS, BOLTS, AND THEADED OD II OUND SLOTTED HEADSTYLE PAT NUMBE THEAD LENGTH P / 3/3 /8 5/3 3/ 9/3 5/ 7/ 9/ 7/8 /8 3/ /8 3/ 5/ 7/ 5/ 3/3 /8 9/4 3/ 9/3 THEAD SIZE A H J T Nominal Screw Size Nominal Screw Length Up to in., incl Over to in., incl Over to in., incl Over in. Tolerance on Length PAT NUMBE THEAD LENGTH PAT NUMBE THEAD LENGTH PAT NUMBE THEAD LENGTH / 7/ 9/ / 7/8 /8 3/ 3/3 /8 5/3 3/ 5/ 7/ 9/ / 7/8 / /8 /8 3/ 9/3 5/ 7/ 7/8 /8 7/8 /8 3/ 5/ /8 3/ / 7/ 3/ 7/8 / 5/ 7/8 3 3/ 0000 thru thru thru mpsales@microplastics.com micro plastics, inc. WEBSITE:

22 TABLE F OF CONTENTS F INDEX A-Z SCEWS, BOLTS, AND THEADED OD II SET SLOTTED HEADSTYLE PAT NUMBE THEAD LENGTH 00S00 00S009 00S0 00S05 00S08 00S05 00S08 00S03 00S037 00S043 00S050 00S05 00S0 00S075 00S087 00S00 00S 004S08 004S B050 00S009 00S0 00S04 00S05 00S08 00S05 00S08 00S03 00S038 00S043 00S050 00S05 00S0 00S08 00S075 00S087 00S00 00S 00S / 3/3 /8 5/3 3/ 9/3 5/ 7/ 9/ 7/8 /8 3/ 3/3 /8 9/4 5/3 3/ 9/3 5/ 7/ 9/ / 7/8 /8 3/ THEAD SIZE A H J T / Nominal Screw Size Nominal Screw Length Up to in., incl Over to in., incl Over to in., incl Over in. Tolerance on Length PAT NUMBE THEAD LENGTH PAT NUMBE THEAD LENGTH PAT NUMBE THEAD LENGTH 00S5 00S37 00S50 00S 00S S05 00S009 00S0 00S05 00S08 00S05 00S03 00S037 00S043 00S050 00S05 00S0 00S08 00S075 00S087 00S00 00S 448 3/3 /8 5/3 3/ 5/ 7/ 9/ / 7/8 /8 00S043 00S050 00S0 00S075 00S087 00S00 00S 00S5 00S37 00S50 00S75 00S87 00S00 0S0 0S08 0S05 0S03 0S037 0S050 0S0 0S075 0S00 7/ 7/8 /8 7/8 /8 3/ 5/ 0S00 050S05 050S03 050S S S0 050S S S00 050S5 050S50 050S75 050S00 050S50 058S08 058S05 058S S0 058S S S03* 034S /-4 5/ 7/8 3/ 5/ 3/ 00S5 00S50 00S 00S75 00S87 00S00 093S S S S S00 00S0 00S08 00S05 00S08 00S03 00S /8 /8 3/ 9/3 5/ 0S5 0S50 0S0 0S08 0S05 0S03 0S037 0S050 0S0 0S075 0S08 0S087 0S00 0S0 0S5 0S50 0S75 /8 3/ 5/ 3/ 7/8 / *SLOT IS IN THEADS 0000 thru thru thru TELEPHONE: (870) 453- / micro plastics, inc. FAX: (870)

23 TABLE F OF CONTENTS F INDEX A-Z SCEWS, BOLTS, AND THEADED OD II SOCKET SET HEADSTYLE PAT NUMBE THEAD LENGTH 0043T050 00T009 00T0 00T04 00T05 00T08 00T05 00T08 00T03 00T037 00T043 00T050 00T05 00T0 00T08 00T075 00T087 00T00 00T 00T8 00T5 00T37 00T50 00T 00T T05 00T009 00T0 00T05 00T08 00T05 00T03 00T037 00T043 00T050 00T05 00T0 00T08 00T /3 /8 9/4 5/3 3/ 9/3 5/ 7/ 9/ / 7/8 /8 3/ 3/3 /8 5/3 3/ 5/ 7/ 9/ / THEAD SIZE J T THEAD SIZE J T 5/ Nominal Screw Size Nominal Screw Length, in. Up to 0.3, incl Over 0.3 to.00, incl Over.00 to.00, incl Over.00 Tolerance on Length PAT NUMBE THEAD LENGTH PAT NUMBE THEAD LENGTH PAT NUMBE THEAD LENGTH 00T087 00T00 00T 00T5 00T50 00T 00T75 00T87 00T00 00T5 0040T T T T00 00T0 00T08 00t05 00T08 00T03 00T /8 /8 7/8 /8 3/ 9/3 5/ 0T0 0T075 0T00 0T5 0T50 0T0 0T08 0T05 0T03 0T037 0T043 0T050 0T0 0T075 0T08 0T087 0T00 0T0 0T5 0T50 /8 3/ 5/ 7/ 3/ 7/8 / 058T T00 038T T T T T T T T T T5 05T050 05T075 05T00 05T T /-8 5/-8 5/ T043 00T050 00T0 00T075 00T087 7/ 7/8 0T75 0T00 050T05 050T03 050T037 5/ Due to the small head style, the longer lengths offered may not support the normal torque required for a Set Screw. We recommend that you test samples prior to production purchases. NOTE: LONG SLOTTED SET SCEWS - OVE 00T00 050T050 - OVE 00T 00T5 00T37 00T50 00T75 00T87 00T00 0T0 0T08 0T05 0T03 0T037 0T050 /8 7/8 /8 3/ 5/ 050T0 050T T T00 050T5 050T50 050T75 050T00 050T50 058T08 058T05 058T T /8 3/ 0 thru +/ / / / mpsales@microplastics.com micro plastics, inc. WEBSITE: 3

24 TABLE F OF CONTENTS F INDEX A-Z SCEWS, BOLTS, AND THEADED OD II PHILLIPS PAN HEADSTYLE PAT NUMBE THEAD LENGTH 00W00 00W009 00W0 00W05 00W08 00W05 00W08 00W03 00W037 00W039 00W043 00W050 00W05 00W0 00W075 00W087 00W00 00W 004W08 004W W050 00W009 00W0 00W04 00W08 00W05 00W08 00W03 00W037 00W043 00W050 00W05 00W0 00W08 00W075 00W087 00W00 00W 00W / 3/3 /8 5/3 3/ 9/3 5/ 5/4 7/ 9/ 7/8 /8 3/ 3/3 /8 9/4 3/ 9/3 5/ 7/ 9/ / 7/8 /8 3/ THEAD SIZE A H Nominal Screw Size Nominal Screw Length Up to in., incl Over in., incl Over to in., incl Over in. Tolerance on Length PAT NUMBE THEAD LENGTH PAT NUMBE THEAD LENGTH PAT NUMBE THEAD LENGTH 00W5 00W37 00W50 00W 00W W W W03 00W009 00W0 00W05 00W08 00W05 00W03 00W037 00W043 00W050 00W05 00W0 00W08 00W075 00W087 00W00 00W 00W5 00W50 00W 00W75 00W87 00W W W W W00 00W0 00W08 00W05 00W08 00W /3 5/ 3/3 /8 5/3 3/ 5/ 7/ 9/ / 7/8 /8 7/8 /8 3/ 9/3 5/ 00W037 00W043 00W050 00W0 00W075 00W087 00W00 00W 00W5 00W37 00W50 00W75 00W87 00W00 0W0 0W08 0W05 0W03 0W037 0W050 0W0 0W075 0W00 0W5 0W50 0W0 0W08 0W05 0W03 0W037 0W043 0W050 0W0 0W075 0W08 0W087 0W00 0W0 0W5 7/ 7/8 /8 7/8 /8 3/ 5/ /8 3/ 5/ 7/ 3/ 7/8 / 0W50 0W75 0W thru thru thru TELEPHONE: (870) 453- / micro plastics, inc. FAX: (870)

25 TABLE F OF CONTENTS F INDEX A-Z SCEWS, BOLTS, AND THEADED OD II PHILLIPS BINDE HEADSTYLE PAT NUMBE THEAD LENGTH 0043WB050 00WB009 00WB0 00WB04 00WB08 00WB05 00WB08 00WB03 00WB037 00WB043 00WB050 00WB05 00WB0 00WB08 00WB075 00WB087 00WB00 00WB 00WB8 00WB5 00WB37 00WB50 00WB 00WB WB WB05 00WB0 00WB08 00WB05 00WB08 00WB03 00WB037 00WB043 00WB050 00WB0 00WB075 00WB087 00WB00 00WB /3 /8 9/4 3/ 9/3 5/ 7/ 9/ / 7/8 /8 3/ 5/3 /8 3/ 9/3 5/ 7/ 7/8 /8 THEAD SIZE A H Nominal Screw Size Nominal Screw Length Up to in., incl Over TO in., incl Over to in., incl Over in thru 00 PAT NUMBE THEAD LENGTH PAT NUMBE THEAD LENGTH 00WB5 00WB37 00WB50 00WB75 00WB87 00WB00 0WB0 0WB08 0WB05 0WB03 0WB037 0WB050 0WB0 0WB075 0WB00 0WB5 0WB50 0WB0 0WB08 0WB05 0WB03 0WB037 0WB043 0WB050 0WB0 0WB075 0WB08 0WB087 0WB00 0WB0 0WB5 0WB50 0WB75 0WB00 050WB05 050WB03 050WB WB WB0 7/8 /8 3/ 5/ /8 3/ 5/ 7/ 3/ 7/8 / 5/ 050WB WB WB00 050WB5 050WB50 050WB75 050WB00 050WB50 058WB08 058WB WB0 058WB WB /8 3/ Tolerance on Length thru thru mpsales@microplastics.com micro plastics, inc. WEBSITE: 5

26 TABLE F OF CONTENTS F INDEX A-Z SCEWS, BOLTS, AND THEADED OD II PHILLIPS OUND HEADSTYLE PAT NUMBE THEAD LENGTH 00W009 00W0 00W05 00W08 00W05 00W03 00W037 00W043 00W050 00W05 00W0 3/3 /8 5/3 3/ 5/ 7/ 9/ THEAD SIZE A H Nominal Screw Size Nominal Screw Length Up to in., incl Over to in., incl Over to in., incl Over in. Tolerance on Length PAT NUMBE THEAD LENGTH PAT NUMBE THEAD LENGTH PAT NUMBE THEAD LENGTH 00W08 00W075 00W087 00W00 00W 00W5 00W50 00W 00W75 00W87 00W00 / 7/8 /8 7/8 00W5 0040W W W W00 0W0 0W08 0W0 0W03 0W037 0W /8 3/ 5/ 0W0 0W075 0W00 0W5 0W50 0W0 0W08 0W05 0W03 0W037 0W043 /8 3/ 5/ 7/ 0000 thru thru thru ITEM NUMBE - 04ASO750MSN Machine Screw and Nut Assortment ITEM NUMBE - 04ASO305MCS Metal Core Screw Assortment TELEPHONE: (870) 453- / micro plastics, inc. FAX: (870)

27 TABLE F OF CONTENTS F INDEX A-Z SCEWS, BOLTS, AND THEADED OD II HEX SOCKET CAP PAT NUMBE THEAD LENGTH /3 /8 9/4 3/ 9/3 5/ 7/ 9/ / 7/8 /8 3/3 /8 5/3 3/ 5/ 7/ / 7/8 /8 THEAD Key Engagement SIZE A H J Min / /4 3/3 7/4 9/4 5/3 3/ 5/ Nominal Screw Size Nominal Screw Length, in Up to.00, incl Over.00 to.50, incl Over.50 to.00, incl Over.00 0 thru incl / thru incl Tolerance on Length PAT NUMBE THEAD LENGTH PAT NUMBE THEAD LENGTH PAT NUMBE THEAD LENGTH /8 /8 3/ 9/3 5/ 7/ 7/8 / / 7/8 / 3/ 5/ 7/8 * / * * * * * 3 * * * * * 3 * / * *NOT FULL THEAD / FT / /8 3/ 5/ /-8 5/-8 5/-8 5/-8 5/-8 5/-8 5/-8 3/ * * * * /8 thru incl Over mpsales@microplastics.com micro plastics, inc. WEBSITE: 7

28 TABLE F OF CONTENTS F INDEX A-Z SCEWS, BOLTS, AND THEADED OD II THEAD SIZE A H J T ECONOMY GADE THUMB SCEWS PAT NUMBE THEAD LENGTH TEG 0900TEG 09004TEG 09008TEG 09005TEG 09008TEG 09003TEG TEG TEG TEG 09005TEG 0900TEG 09008TEG TEG TEG 09000TEG 090TEG 0908TEG 0905TEG 09037TEG 09050TEG 09075TEG TEG TEG 0900TEG 09005TEG 09008TEG 09005TEG 09003TEG TEG TEG TEG 09005TEG 0900TEG 09008TEG TEG TEG 09000TEG 090TEG 448 3/3 /8 9/4 3/ 9/3 5/ 7/ 9/ / 7/8 /8 3/ 3/3 /8 5/3 3/ 5/ 7/ 9/ / 7/8 / Nominal Screw Length Up to including Over to including Over Tolerance on Length +/ /-0.0 +/-0.09 PAT NUMBE THEAD LENGTH PAT NUMBE THEAD LENGTH PAT NUMBE THEAD LENGTH 0905TEG 09050TEG 090TEG 09075TEG 09087TEG 0905TEG TEG TEG TEG TEG 0900TEG 09008TEG 09005TEG 09008TEG 09003TEG TEG TEG TEG 0900TEG TEG TEG 09000TEG 090TEG 0905TEG 09037TEG 09050TEG 09075TEG 09087TEG 09000TEG 090TEG 0908TEG 0905TEG 0903TEG 09037TEG 09050TEG 090TEG 09075TEG 0900TEG 095TEG /8 /8 3/ 9/3 5/ 7/ 7/8 /8 7/8 /8 3/ 5/ 0950TEG 090TEG 0908TEG 0905TEG 0903TEG 09037TEG 09043TEG 09050TEG 090TEG 09075TEG 0908TEG 09087TEG 0900TEG 090TEG 095TEG 0950TEG 0975TEG 0900TEG /8 3/ 5/ 7/ 3/ 7/8 / TEG TEG TEG TEG 09500TEG TEG TEG TEG 09505TEG TEG TEG TEG TEG TEG TEG TEG TEG TEG TEG / 7/8 3/ 8 TELEPHONE: (870) 453- / micro plastics, inc. FAX: (870)

29 TABLE F OF CONTENTS F INDEX A-Z SCEWS, BOLTS, AND THEADED OD II KNULED HEAD THUMB SCEWS PAT NUMBE THEAD LENGTH 09008T 3/ (4,57) 09005T T T T 09005T T T T 09000T 09008T T T T 09000T 09050T 3/ (,35) (9,53) (,70) (9,05) (,35) (9,53) (,70) (9,05) (5,40) (4,7) (9,53) (,70) (9,05) (5,40) (,70) 09075T 0900T 095T (9,05) (5,40) (3,75) 0900T 09037T 09050T 09075T 0900T (50,80) (9,53) (,70) (9,05) (5,40) 090T 0950T /(,99) (38,0) 0900T T T T (50,80) (,70) (9,05) (5,40) 09505T T (3,75) (38,0) T T 5/-8 5/-8 (,70) (5,40) T 5/-8 (38,0) T T T 5/ (50,80) (,70) (5,40) T - (38,0) T T T (50,80) (,70) (5,40) T -3 (38,0) T -3 (50,80) THEAD SIZE A * B * C (7,).30 (98,4) 8.45 (0,80) 0.45 (0,80).540 (3,7) 5/.5 (5,).87 (7,45).750 (9,05) Nominal Screw Length Up to including Over to including Over.80 (7,).75 (,99).305 (7,75).35 (8,).35 (9,7).385 (9,78).430 (0,9).48 (,89) * +/-.00 on A and B Dimensions Tolerance on Length +/ /-0.0 +/ (3,7).5 (3,8).40 (3.5).40 (3,5).55 (3,94).7 (4,34).87 (4,75).03 (5,) OVAL HEAD THUMB SCEWS PAT NUMBE THEAD LENGTH V V 09500V V V V V V THEAD SIZE HD WIDTH HD HEIGHT HD THICKNESS /3 mpsales@microplastics.com micro plastics, inc. WEBSITE: 9

30 TABLE F OF CONTENTS F INDEX A-Z SCEWS, BOLTS, AND THEADED OD II HEX CAP SCEWS PAT NUMBE THEAD LENGTH /-8 5/-8 5/-8 5/-8 5/ THEAD SIZE A W H 5/ 7/ Nominal Length Up to in., incl. Over in. to -. in., incl. Over - in. to 4 in., incl. Over 4 in. to in., incl. Longer than in. to 7/ to 9/ to 7/8 to /8 to /8 over - PAT NUMBE THEAD LENGTH PAT NUMBE THEAD LENGTH PAT NUMBE THEAD LENGTH FT /-8 5/-8 5/-8 5/-8 5/-8 5/-8 5/-8 5/-8 5/-8 5/-8 5/ / FT FT FT /8-9 7/ FT = Full Threaded "SPECIAL ITEM" SLOTTED HEX WASHE CAP ALL PATS UP TO LONG AE FULLY THEADED ITEM NUMBE DESCIPTION Slotted Hex Washer Cap 400 Slotted Hex Washer Cap 30 TELEPHONE: (870) 453- / micro plastics, inc. FAX: (870)

31 TABLE F OF CONTENTS F INDEX A-Z SCEWS, BOLTS, AND THEADED OD II SLOTTED HEX CAP SCEWS PAT NUMBE THEAD LENGTH /-8 5/-8 5/-8 5/-8 5/-8 THEAD SIZE A W H J T 5/ Nominal Length Up to in., incl. Over in. to -. in., incl. Over - in. to 4 in., incl. Over 4 in. to in., incl. Longer than in. to 7/ to 9/ to 7/8 to /8 to /8 PAT NUMBE THEAD LENGTH PAT NUMBE THEAD LENGTH PAT NUMBE THEAD LENGTH /-8 5/-8 5/-8 5/-8 5/-8 5/-8 5/-8 5/-8 5/-8 5/-8 5/ / FT FT = FULL THEAD over SLOTTED HEX WASHE CAP ALL PATS UP TO LONG AE FULLY THEADED PAT NUMBE THEAD LENGTH 3W W W W3755 3W W W W A B H U J T W mpsales@microplastics.com micro plastics, inc. WEBSITE: 3

32 TABLE F OF CONTENTS F INDEX A-Z SCEWS, BOLTS, AND THEADED OD II THEAD SIZE T A J GUB SLOTTED HEADSTYLE PAT NUMBE THEAD LENGTH 00G009 00G0 00G05 00G08 00G05 00G03 00G037 00G043 00G050 00G05 00G0 00G08 00G075 00G087 00G00 00G 00G5 00G50 00G 00G75 00G G G G G00 00G0 00G08 00G05 00G08 00G03 00G037 00G043 00G050 00G0 00G075 00G /3 /8 5/3 3/ 5/ 7/ 9/ / 7/8 /8 7/8 /8 3/ 9/3 5/ 7/ 7/8 PAT NUMBE THEAD LENGTH PAT NUMBE THEAD LENGTH PAT NUMBE THEAD LENGTH 00G00 00G 00G5 00G37 00G50 00G75 00G87 00G00 0G0 0G08 0G05 0G03 0G037 0G050 0G0 0G075 0G00 0G5 0G50 0G0 0G08 0G05 0G03 0G037 0G043 0G050 0G0 0G075 0G08 0G087 0G00 0G0 0G5 0G50 0G75 0G00 /8 7/8 /8 3/ 5/ /8 3/ 5/ 7/ 3/ 7/8 / 050G05 050G03 050G G G0 050G G G00 050G5 050G50 050G75 050G00 5/ 7/8 050G50 058G08 058G05 058G G0 058G G G G G G / 3 TELEPHONE: (870) 453- / micro plastics, inc. FAX: (870)

33 TABLE OF CONTENTS FINDEX A-Z SCEWS, BOLTS, AND THEADED OD II THEAD * EF. ONLY SIZE A * H J T 00 FLAT HEADSTYLE PAT NUMBE THEAD LENGTH 00B0 /8 00B08 3/ 00B03 5/ 00B050 00B0 00B08 3/ 00B05 00B03 5/ PAT NUMBE THEAD LENGTH PAT NUMBE THEAD LENGTH PAT NUMBE THEAD LENGTH 00B037 00B050 0B050 00B050 00B0 0B08 / 00B /3 00B00 050B037 00B0 00B /8 050B075 00B00 00B B087 7/8 00B08 3/ 00B053 7/3 050B00 00B05 00B00 050B0 -/ 00B037 0B08 3/ 050B -/8 LICENSE PLATE FASTENES STANDAD.050 ITEM NUMBE ITEM NUMBE ITEM NUMBE 050LP LPN 04500LPNS STANDAD BOLT STANDAD NUT SPEC. STANDAD NUT Part Number 0SGN000LPS is a set of deluxe license plate fasteners packaged in a clear poly bag. Set includes two each of part number 0SGN000 (grommet) and 0W0ZP (zinc plated screw). DELUXE ITEM NUMBE ITEM NUMBE ITEM NUMBE 0W0ZP TAL SCEW 0-3 X " PHIL PAN 0SGN000 GOET 0SGN000LPS FOU PIECE SET mpsales@microplastics.com micro plastics, inc. WEBSITE: 33

34 TABLE F OF CONTENTS F INDEX A-Z SCEWS, BOLTS, AND THEADED OD II THEAD SIZE A H *ef. Only J T 8 FLAT HEADSTYLE PAT NUMBE THEAD LENGTH 00A08 00A05 00A03 00A037 00A043 00A050 00A05 00A075 00A0 00A05 00A08 00A05 00A03 00A037 00A050 00A05 00A0 00A075 00A00 00A 00A8 00A5 00A37 00A50 00A A A / 5/ 7/ 9/ /8 5/3 3/ 5/ 9/ /8 3/ 5/ / PAT NUMBE THEAD LENGTH PAT NUMBE THEAD LENGTH 00A08 00A05 00A03 00A037 00A050 00A0 00A075 00A00 00A 00A5 00A0 00A05 00A03 00A037 00A043 00A050 00A05 00A0 00A075 00A00 00A5 0A050 0A075 0A00 0A05 0A03 0A037 3/ 5/ /8 /8 5/ 7/ 9/ 5/ 0A050 0A075 0A087 0A00 0A5 0A50 050A05 050A A0 050A A A00 050A5 050A50 050A75 050A00 050A50 038A A75 5/-8-7/8 7/8 SPECIAL ITEM 8 FLAT ITEM NUMBE TELEPHONE: (870) 453- / micro plastics, inc. FAX: (870)

35 TABLE F OF CONTENTS FINDEX A-Z SCEWS, BOLTS, AND THEADED OD 80 8 II 8 OVAL HEADSTYLE PAT NUMBE THEAD LENGTH 330A08 330A05 330A03 330A A A A05 330A A0 330A05 330A08 330A05 330A03 330A A A05 330A0 330A A00 330A 330A8 330A5 330A37 330A50 330A A A / 5/ 7/ 9/ /8 5/3 3/ 5/ 9/ /8 3/ 5/3 THEAD * EF. ONLY SIZE A * H O J T PAT NUMBE THEAD LENGTH PAT NUMBE THEAD LENGTH PAT NUMBE THEAD LENGTH 330A05 330A03 330A A A0 330A A00 330A 330A5 330A75 330A0 330A05 330A03 330A A A A05 330A0 330A A00 330A5 33A050 33A075 33A00 33A5 33A05 33A03 5/ /8 /8 5/ 7/ 9/ 5/ 33A037 33A050 33A075 33A087 33A00 33A5 33A A A050 7/8 3350A0 3350A A A A5 3350A A A A50 7/8 mpsales@microplastics.com micro plastics, inc. WEBSITE: 35

36 TABLE F OF CONTENTS F INDEX A-Z SCEWS, BOLTS, AND THEADED OD II This versatile threaded rod stock is easily cut to size, resistant to most chemicals,electrically insulating, non-magnetic,lightweight,low thermal conductivity, vibration and abrasion resistant. Stock length is feet. Longer lengths up to 8 feet available on special order. We can furnish cut to your length with a nominal cutting charge. Other plastic materials can be furnished on special order. equest quote. THEADED ODS ITEM NUMBE 3800T 3800T 3800T 380T 380T 38500T 3838T 38375T T 385T T T T DESCIPTION 5/ / Threaded od Threaded od Threaded od Threaded od Threaded od Threaded od Threaded od Threaded od Threaded od Threaded od Threaded od Threaded od Threaded od THEADED STUDS Injection molded threaded studs with chamfer on both ends are available in several of the most popular sizes and lengths. Threaded studs are molded in natural Nylon / UL 94V. These studs are resistant to most chemicals, electrically insulating, non magnetic, lightweight, low thermal conductivity, vibration and abrasion resistant. ITEM NUMBE DESCIPTION SD 0-3 Threaded Studs 38000SD 0-3 Threaded Studs 38050SD 0-3 Threaded Studs LENGTH TOLEANCE 38000SD 0-3 Threaded Studs to +0/ SD 0-3 Threaded Studs - to +0/ SD Threaded Studs to 5 +0/ SD Threaded Studs SD Threaded Studs SD Threaded Studs SD Threaded Studs SD 3 Threaded Studs SD 5/-8 Threaded Studs SD 5/-8 Threaded Studs SD 5/-8 Threaded Studs SD 5/-8 Threaded Studs SD 5/-8 3 Threaded Studs SD - Threaded Studs SD - Threaded Studs SD - Threaded Studs SD - Threaded Studs SD - 3 Threaded Studs SD - 4 Threaded Studs SD -3 Threaded Studs SD -3 Threaded Studs SD -3 Threaded Studs SD -3 3 Threaded Studs SD -3 4 Threaded Studs SD -3 5 Threaded Studs 3 TELEPHONE: (870) 453- / micro plastics, inc. FAX: (870)

37 TABLE F OF CONTENTS UNIVESAL NUTS FINDEX A-Z STOCKED IN NYLON / UL 94V - CAN BE FUNISHED IN: ACETAL ESIN CELANESE CELCON M70 UL 94 HB III NYLON SLOTTED THUMB NUTS ITEM * +/-.00 tolerance column B NUMBE DESCIPTION A ef. * B C E 0500SCN SLOTTED THUMB NUT.95 (7,49).37 (8,05).039 (9,9).070 (,78) 0500SCN SLOTTED THUMB NUT.334 (8,48).348 (8,84).044 (,).05 (,30) 0500SCN SLOTTED THUMB NUT.378 (9,0).38 (9,8).049 (,5).059 (,50) 050SCN SLOTTED THUMB NUT 3/4 (9,).400 (0,).05 (,43).08 (,73) 050SCN SLOTTED THUMB NUT 3/4 (9,).400 (0,).05 (,43).08 (,73) 05500SCN SLOTTED THUMB NUT.370 (9,40).478 (,4).070 (,78).088 (,4) NYLON LOCK NUTS DESIGNED FO STEEL SCEWS ITEM NUMBE DESCIPTION F H 0700LN LOCK NUT.80 (4,57).40 (3,5) 0700LN LOCK NUT.50 (,35).00 (5,08) 0700LN LOCK NUT.305 (7,75).00 (5,08) 0700LN LOCK NUT.335 (8,5).30 (5,84) 070LN LOCK NUT.35 (9,7).50 (,35) 070LN LOCK NUT.35 (9,7).50 (,35) 07500LN LOCK NUT.45 (0,80).75 (,99) NYLON SELF - THEADING LOCK NUTS DESIGNED FO STEEL SCEWS ITEM NUMBE DESCIPTION F H 0700SLN SELF - THEAD.80 (4,57).40 (3,5) 0700SLN SELF - THEAD.50 (,35).00 (5,08) 0700SLN SELF - THEAD.305 (7,75).00 (5,08) 0700SLN SELF - THEAD.335 (8,5).30 (5,84) 070SLN SELF - THEAD.35 (9,7).50 (,35) 070SLN SELF - THEAD.35 (9,7).50 (,35) 07500SLN SELF - THEAD.45 (0,80).75 (,99) ALL TOLEANCES AE +/ mpsales@microplastics.com micro plastics, inc. WEBSITE: 37

38 TABLE F OF CONTENTS UNIVESAL NUTS FINDEX A-Z III STOCKED IN NYLON / UL 94V - CAN BE FUNISHED IN: ACETAL ESIN CELANESE CELCON M70 UL 94 HB NYLON HEX NUTS ITEM NUMBE DESCIPTION F H 0400HN HEX NUT.80 (4,57).070 (,78) HN 348 HEX NUT.80 (4,57).070 (,78) 0400HN HEX NUT.50 (,35).00 (,54) 0400HN HEX NUT.305 (7,75).0 (3,05) HN 40 HEX NUT.305 (7,75).0 (3,05) 0400HN HEX NUT 335 (8,5).30 (3,30) 040HN HEX NUT.35 (9,7).35 (3,43) 040HN HEX NUT.35 (9,7).35 (3,43) 0404HN 4 HEX NUT.45 (0,80).07 (5,) 04500HN HEX NUT.433 (,00).33 (5,9) 04508HN -8 HEX NUT.433 (,00).35 (5,97) 0438HN 5/-8 HEX NUT.500 (,70).70 (,8) 0434HN 5/-4 HEX NUT.500 (,70).70 (,8) 04375HN - HEX NUT.50 (4,).330 (8,38) HN -4 HEX NUT.50 (4,).330 (8,38) HN -3 HEX NUT.50 (4,).330 (8,38) HN 7/-4 HEX NUT.85 (7,40).380 (9,5) HN 7/-0 HEX NUT.85 (7,40).380 (9,5) HN -3 HEX NUT.750 (9,05).430 (0,9) HN -0 HEX NUT.750 (9,05).430 (0,9) 045HN - HEX NUT.95 (3,40).550 (3,97) 0458HN -8 HEX NUT.95 (3,50).550 (3,97) 04877HN /-7 HEX NUT.00 (5,40).50 (,35) HN -0 HEX NUT.0 (7,94).40 (,) HN 7/8-9 HEX NUT.8 (3,5).750 (9,05) HN -8 HEX NUT.47 (37,34).870 (,0) NYLON SPECIAL HEX NUTS ITEM NUMBE DESCIPTION F H 0400HNS SPECIAL HEX NUT.80 (4,57).090 (,9) 0400HNS SPECIAL HEX NUT.50 (,35).4 (3,5) 0400HNS SPECIAL HEX NUT.305 (7,75).4 (3,7) 0400HNS SPECIAL HEX NUT.340 (8,4).70 (4,3) 040HNS SPECIAL HEX NUT.35 (9,7).9 (4,98) 040HNS SPECIAL HEX NUT.35 (9,37).9 (4,98) 04500HNS SPECIAL HEX NUT.45 (0,80).58 (,55) ALL TOLEANCES AE +/ TELEPHONE: (870) 453- / micro plastics, inc. FAX: (870)

39 TABLE F OF CONTENTS UNIVESAL NUTS FINDEX A-Z STOCKED IN NYLON / UL 94V - CAN BE FUNISHED IN: ACETAL ESIN CELANESE CELCON M70 UL 94 HB NYLON HEX JAM NUTS III ITEM NUMBE DESCIPTION F H 0438HJN 5/-8 HEX JAM NUT.500 (,70).90 (4,83) 0434HJN 5/-4 HEX JAM NUT.500 (,70).90 (4,83) 04375HJN - HEX JAM NUT.500 (,70).5 (3,8) HJN -4 HEX JAM NUT.500 (,70).5 (3,8) HJN -3 HEX JAM NUT.500 (,70).5 (3,8) 04375HHJN - HEX JAM NUT SPEC..70 (7,0) 7/3 (5,5) HJN 7/-4 HEX JAM NUT.87 (7,45).375 (9,53) HJN 7/-0 HEX JAM NUT.87 (7,45).50 (,35) 044HJN 5/3-3 HEX JAM NUT.5 (5,88).5 (3,8) HJN -3 HEX JAM NUT.87 (7,45).0 (5,59) HJN -4 HEX JAM NUT.87 (7,45).0 (5,59) HJN -8 HEX JAM NUT.0 (,7).5 (3,8) 0458HJN 9/-8 HEX JAM NUT.750 (9,05).50 (,35) 045HJN - HEX JAM NUT.930 (3,).375 (9,53) 0458HJN -8 HEX JAM NUT.937 (3,80).375 (9,53) HJN -0 HEX JAM NUT. (8,50).50 (,35) 04750HJN - HEX JAM NUT. (8,50).50 (,35) HJN -7 HEX JAM NUT.00 (5,40).5 (3,8) HJN 7/8-4 HEX JAM NUT.5 (3,75).340 (8,4) HJN -8 HEX JAM NUT.48 (37,59).40 (0,4) 0457PJN /8-7 HEX JAM NUT.5 (4,). (,79) 04508PJN -8 HEX JAM NUT NPT.740 (8,80).87 (4,75) PJN -8 HEX JAM NUT NPT.00 (5,40).80 (7,) PJN -4 HEX JAM NUT NPT.5 (3,75).340 (8,4) PJN -4 HEX JAM NUT NPT.48 (37,59.40 (0,4) SJN -4 HEX JAM NUT NPS.48 (37,59).40 (0,4) 04508SJN -8 HEX JAM NUT NPS.87 (7,45.5 (5,7) SJN -8 HEX JAM NUT NPS.00 (5,40).80 (7,) SJN -4 HEX JAM NUT NPS.5 (3,75).340 (8,4) SJN -4 HEX JAM NUT NPS.48 (37,59).40 (0,4) TOLEANCES AE +/-.00 ON F and H DINSIONS NYLON LOCKING CAP NUTS Similar to our standard cap nut, except with a molded-in locking thread. Use for applications which require higher torque, vibration resistance or a more secure assembly. ITEM NUMBE DESCIPTION F H * EF. 0500LCN LOCKING CAP NUT.50 (,35).80 (7,) 0500LCN LOCKING CAP NUT.305 (7,75).345 (8,7) 0500LCN LOCKING CAP NUT.330 (8,38).375 (9,53) 050LCN LOCKING CAP NUT.35 (9,7).400 (0,) 050LCN LOCKING CAP NUT.35 (9,7).400 (0,) 05500LCN 0538LCN LOCKING CAP NUT 5/-8 LOCKING CAP NUT.45 (0,80).500 (,70).475 (,07).530 (3,4) TOLEANCES AE +/-.00 ON F and H DINSIONS mpsales@microplastics.com micro plastics, inc. WEBSITE: 39

40 TABLE F OF CONTENTS UNIVESAL NUTS FINDEX A-Z III STOCKED IN NYLON / UL 94V - CAN BE FUNISHED IN: ACETAL ESIN CELANESE CELCON M70 UL 94 HB NYLON CAP NUTS F AND H TOLEANCES +/-.00 ITEM NUMBE DESCIPTION F H * EF. 0500CN CAP NUT.50 (,35).80 (7,) 0500CN CAP NUT.305 (7,75).345 (8,7) 0500CN CAP NUT.330 (8,38).375 (9,53) 050CN CAP NUT.35 (9,7).400 (0,) 050CN CAP NUT.35 (9,7).400 (0,) 05500CN CAP NUT.45 (0,80).475 (,07) 05508CN -8 CAP NUT.45 (0,80).475 (,07) 0538CN 5/-8 CAP NUT.500 (,70).530 (3,4) 0534CN 5/-4 CAP NUT.500 (,70).530 (3,4) 05375CN - CAP NUT.50 (4,).0 (5,75) CN -4 CAP NUT.50 (4,).0 (5,75) CN -3 CAP NUT.750 (9,05).80 (0,57) 055CN - CAP NUT.935 (3,75).970 (4,4) NYLON KNULED THUMB NUTS A AND B TOLEANCES +/-.00 ITEM NUMBE DESCIPTION A B C 0800TN THUMB NUT.300 (7,).80 (7,).5 (3,8) 0800TN THUMB NUT.30 (9,4).75 (,99).5 (3,8) 0800TN THUMB NUT.45 (0,80).305 (7,75).40 (3,5) 080TN THUMB NUT.45 (0,80).35 (8,).40 (3,5) 080TN THUMB NUT.45 (0,80).35 (8,).40 (3,5) 08500TN THUMB NUT.540 (3,7).35 (9,7).55 (3,94) 0838TN 5/-8 THUMB NUT. (5,54).400 (0,).70 (4,33) NYLON KNULED THUMB NUTS A ITEM NUMBE DESCIPTION A B C 0800TNA THUMB NUT A.300 (7,).80 (7,).0 (3,05) 0800TNA THUMB NUT A.30 (9,4).75 (,99).5 (3,8) 0800TNA THUMB NUT A.45 (0,80).305 (7,75).40 (3,5) 080TNA THUMB NUT A.45 (0,80).35 (8,).40 (3,5) 080TNA THUMB NUT A.45 (0,80).35 (8,).40 (3,5) 08500TNA THUMB NUT A.540 (3,7).35 (9,7).55 (3,94) 0838TNA 5/-8 THUMB NUT A.5 (5,).385 (9,78).7 (4,34) 08375TNA - THUMB NUT A.87 (7,45).430 (0,9).87 (4,75) TNA -3 THUMB NUT A.750 (9,05).48 (,89).03 (5,) 40 TELEPHONE: (870) 453- / micro plastics, inc. FAX: (870)

41 TABLE F OF CONTENTS FINDEX A-Z UNIVESAL NUTS STOCKED IN NYLON / UL 94V - CAN BE FUNISHED IN: ACETAL ESIN CELANESE CELCON M70 UL 94 HB III NYLON WING NUTS ITEM NUMBE DESCIPTION A B C D 000WN WING NUT.90 (,8).48 (,9).3 (5,84).40 (0,) 000WN WING NUT.90 (,8).48 (,9).3 (5,84).40 (0,) 000WN WING NUT.90 (,8).48 (,9).3 (5,84).40 (0,) 00WN WING NUT.90 (,8).48 (,9).3 (5,84).40 (0,) 00WN WING NUT.90 (,8).48 (,9).3 (5,84).40 (0,) 00WNA WING NUT-A.0 (7,94).3 (,00).30 (7,).5 (4,) 00WNA WING NUT-A.0 (7,94).3 (,00).30 (7,).5 (4,) 0500WNA WING NUT-A.0 (7,94).3 (,00).30 (7,).5 (4,) 0508WNA -8 WING NUT-A.0 (7,94).3 (,00).30 (7,).5 (4,) 0500WN WING NUT.3 (34,54).7 (8,03).3 (9,4).5 (,5) 0508WN -8 WING NUT.3 (34,54).7 (8,03).3 (9,4).5 (,5) 038WN 5/-8 WING NUT.38 (35,05).7 (8,9).3 (9,4).5 (,5) 0375WN - WING NUT.38 (35,05).7 (8,9).3 (9,4).5 (,5) 03754WN -4 WING NUT.40 (35,5).7 (8,9).3 (9,4).4 (,) 04374WN 7/-4 WING NUT.7 (44,70).90 (,8).5 (4,).85 (,59) 05003WN -3 WING NUT.7 (44,70).90 (,8).5 (4,).85 (,59) 05WN 9/- WING NUT.7 (44,70).90 (,8).5 (4,).85 (,59) NYLON DECO WING NUTS ITEM NUMBE DESCIPTION A B C D 000DECOWN DECO WING NUT " (5,88) " (9,53) 5/" (7,94) 5/4" (5,94) 000DECOWN DECO WING NUT " (5,88) " (9,53) 5/" (7,94) 5/4" (5,94) 000DECOWN DECO WING NUT " (5,88) " (9,53) 5/" (7,94) 5/4" (5,94) 00DECOWN DECO WING NUT 7/8" (,3) " (,70) 7/" (,0) 5/" (7,93) 00DECOWN DECO WING NUT 7/8" (,3) " (,70) 7/" (,0) 5/" (7,93) 0500DECOWN DECO WING NUT -/4" (9,74) " (5,88) 7/3" (3,49) " (9,53) 03754DECOWN -4 DECO WING NUT -9/" (39,7) 3/4" (5,0) 9/4" (,5) /3" (,) NYLON LOCKING DECO WING NUTS Similar to our standard wing nut, except with a molded-in locking thread. Use for applications which require higher torque, vibration resistance or a more secure assembly. ITEM NUMBE DESCIPTION A B C D 000DLWN LOCKING DECO WING NUT " (5,88) " (9,53) 5/" (7,94) 5/4" (5,94) 000DLWN LOCKING DECO WING NUT " (5,88) " (9,53) 5/" (7,94) 5/4" (5,94) 000DLWN LOCKING DECO WING NUT " (5,88) " (9,53) 5/" (7,94) 5/4" (5,94) 00DLWN LOCKING DECO WING NUT 7/8" (,3) " (,70) 7/" (,0) 5/" (7,93) 00DLWN LOCKING DECO WING NUT 7/8" (,3) " (,70) 7/" (,0) 5/" (7,93) 0500DLWN LOCKING DECO WING NUT -/4" (9,74) " (5,88) 7/3" (3,49) " (9,53) *038DLWN 5/-8 LOCKING DECO WING NUT -9/ (39,9) 3/4 (5,00) 9/4 (,5) 39/4 (5,48) *Part is flush across wings mpsales@microplastics.com micro plastics, inc. WEBSITE: 4

42 TABLE F OF CONTENTS FINDEX A-Z WASHES, SHOULDE WASHES AND SCEW INSULATOS IV Similar to our standard flat washers, but with a specially configured I.D. designed to grip the outside of the screw shank. The washer slides on the screw easily, but is retained on the screw. For use in applications requiring pre-assembly of the screw and washer, to reduce final assembly cost. Other sizes will be tooled on request. NYLON ETAINING WASHES ITEM NUMBE DESCIPTION A B D T FWT0003 FWT -03 3/4 (5,).5 (,9).078 (,98).03 (0,79) FWT000 FWT -0 3/4 (5,).5 (,9).078 (,98).0 (,58) FWT00403 FWT /4 (,75).5 (3,9).0 (,59).03 (0,79) FWT0040 FWT 4-0 7/4 (,75).5 (3,9).0 (,59).0 (,58) FWT0045 FWT 4-5 7/4 (,75).5 (3,9).0 (,59).5 (3,8) FWT0003 FWT -03 /4 (8,33).98 (5,03).8 (3,5).03 (0,79) FWT000 FWT -0 /4 (8,33).98 (5,03).8 (3,5).0 (,58) FWT00803 FWT /4 (9,9).35 (5,97).5 (3,8).03 (0,79) FWT0080 FWT 8-0 5/4 (9,9).35 (5,97).5 (3,8).0 (,58) FWT0003 FWT /4 (,5).77 (7,04).77 (4,50).03 (0,79) FWT000 FWT 0-0 9/4 (,5).77 (7,04).77 (4,50).0 (,58) FWT5003 FWT /3 (5,08).375 (9,53).34 (5,94).03 (0,79) FWT500 FWT /3 (5,08).375 (9,53).34 (5,94).0 (,58) FWT303 FWT /4 (8,5).470 (,94).9 (7,4).03 (0,79) FWT30 FWT /4 (8,5).470 (,94).9 (7,4).0 (,58) FWT37503 FWT /4 (,).54 (4,33).350 (8,89).03 (0,79) FWT3750 FWT /4 (,).54 (4,33).350 (8,89).0 (,58) FWT43703 FWT /34 (,9).570 (4,48).40 (0,4).03 (0,79) FWT4370 FWT /3 (,9).570 (4,48).40 (0,4).0 (,58) FWT50003 FWT /8 (8,58).90 (7,53).48 (,89).03 (0,79) FWT5000 FWT /8 (8,58).90 (7,53).48 (,89).0 (,58) Available in natural or black nylon, these molded washers protect cabinets from scratching, cover misaligned holes, etc. May also be used as glides, bumpers, feet, and spacers. NYLON FINISHING WASHES ITEM NUMBE DESCIPTION A B C SFW000 SFW.437 (,0).43 (3,3).00 (,54) SFW0008 SFW 8.50 (,95).7 (4,34).5 (,9) SFW000 SFW (4,).9 (4,98).5 (3,8) SFW00 SFW.09 (5,47).5 (5,75).0 (4,0) SFW005 SFW 5.83 (7,35).0 (,).80 (4,57) 4 TELEPHONE: (870) / 453- micro plastics, inc. FAX: (870)

43 TABLE F OF CONTENTS FINDEX A-Z WASHES, SHOULDE WASHES AND SCEW INSULATOS IV We will also tool custom flatwashers for a nominal engineering charge. Size range up to 3" O.D. Minimum thickness /3" NYLON STANDAD FLAT WASHES ITEM NUMBE DESCIPTION A B T FW0003 FW -03 (,35).090 (,9).03 (0,8) FW000 FW -0 (,35).090 (,9).0 (,58) FW00093 FW -093 (,35).090 (,9).093 (,3) FW005 FW -5 (,35).090 (,9).5 (3,8) FW00403 FW 4-03 (,35).5 (,9).03 (0,8) FW0040 FW 4-0 (,35).5 (,9).0 (,58) FW FW (,35).5 (,9).093 (,3) FW0045 FW 4-5 (,35).5 (,9).5 (3,8) FW0003 FW -03 5/ (7,94).40 (3,5).03 (0,8) FW000 FW -0 5/ (7,94).40 (3,5).0 (,58) FW00093 FW / (7,94).40 (3,5).093 (,3) FW005 FW -5 5/ (7,94).40 (3,5).5 (3,8) FW00803 FW 8-03 (9,53).7 (4,34).03 (0,8) FW0080 FW 8-0 (9,53).7 (4,34).0 (,58) FW FW (9,53).7 (4,34).093 (.3) FW0085 FW 8-5 (9,53).7 (4,34).5 (3,8) FW0003 FW 0-03 (9,53).94 (4,93).03 (0,8) FW000 FW 0-0 (9,53).94 (4,93).0 (,58) FW00093 FW (9,53).94 (4,93).093 (,3) FW005 FW 0-5 (9,53).94 (4,93).5 (3,8) FW5003 FW (,70).57 (,53).03 (0,8) FW500 FW 50-0 (,70).57 (,53).0 (,58) FW50093 FW (,70).57 (,53).093 (,3) FW505 FW 50-5 (,70).57 (,53).5 (3,8) FW303 FW 3-03 (,70).37 (8,05).03 (0,8) FW30 FW 3-0 (,70).37 (8,05).0 (,58) FW3093 FW (,70).37 (8,05).093 (,3) FW35 FW 3-5 (,70).37 (8,05).5 (3,8) FW37503 FW (5,88).375 (9,53).03 (0,8) FW3750 FW (5,88).380 (9,5).0 (,58) FW FW (5,88).380 (9,5).093 (,3) FW3755 FW (5,88).380 (9,5).5 (3,8) FW43703 FW (9,05).443 (,5).03 (0,8) FW4370 FW (9,05).443 (,5).0 (,58) FW FW (9,05).443 (,5).093 (,3) FW4375 FW (9,05).443 (,5).5 (3,8) FW50003 FW (9,05).505 (,83).03 (0,8) FW5000 FW (9,05).505 (,83).0 (,58) FW FW (9,05).505 (,83).093 (,3) FW5005 FW (9,05).505 (,83).5 (3,8) mpsales@microplastics.com micro plastics, inc. WEBSITE: 43

44 TABLE F OF CONTENTS FINDEX A-Z WASHES, SHOULDE WASHES AND SCEW INSULATOS IV NYLON SPECIAL FLAT WASHES ITEM NUMBE DESCIPTION A B T 7W0090 W (,9).03 (0,79).03 (0,79) 7W000 W (,54).035 (0,89).00 (0,5) 7W00 W 0.5 (3,8).03 (0,8).00 (,57) 7W00 W 0.0 (3,05).03 (,0).80 (4,57) 7W003 W 03.0 (3,05).045 (,4).30 (3,30) 7W0045 W (3,89).03 (0,79).0 (,57) 7W038 W (3,5).040 (,0).033 (0,84) 7W050 W 50.5 (3,9).050 (,00).00 (5,08) 7W05 W 5.5 (3,9).07 (,93).0 (,57) 7W058 W (4,0).0 (,79).070 (,79) 7W070 W (4,3).038 (0,97).00 (,5) 7W070 W 70.8 (4,).0 (3,05).5 (3,7) 7W0784 W (4,5).098 (,49).045 (,4) 7W079 W (4,55).05 (,5).078 (,98) 7W080 W (4,57).39 (3,53).04 (,3) 7W0803 W (4,7).098 (,49).030 (,0) 7W0804 W (4,75).0 (3,05).00 (,5) 7W0805 W (4,75).08 (,8).30 (3,30) 7W0809 W (4,75).4 (3,58).5 (3,8) 7W085 W (4,78).094 (,39).00 (0,5) 7W085 W 85.9 (4,98).085 (,).03 (0,79) 7W0870 W (4,75).0 (3,05).0 (,57) 7W087 W (4,70).05 (,30).3 (3,35) 7W0875 W (4,75).30 (3,30).50 (3,8) 7W0900 W (5,05).5 (,95).050 (,7) 7W090 W 90.0 (5,3). (,84).053 (,35) 7W090 W (4,83).0 (3,05).00 (,54) 7W0950 W (5,00).5 (,9).030 (0,7) 7W0970 W (5,00).00 (,54).5 (3,9) 7W0994 W (5,05).5 (3,8).045 (,4) 7W08 W 8.8 (5,54).0 (3,05).037 (0,94) 7W090 W 90.0 (5,59).04 (,4).03 (0,79) 7W09 W 9.9 (5,5).094 (,39).00 (,54) 7W045 W 45.5 (5,7).50 (3,8).045 (,4) 7W05 W 5.5 (5,7).5 (3,8).00 (,54) 7W0349 W (5,94).4 (3,58).090 (,9) 7W0350 W (5,97).5 (3,8).040 (,0) 7W040 W (,0).3 (,87).040 (,0) 7W0450 W (,).95 (4,95).5 (3,8) 7W045 W (,).8 (3,5).093 (,3) 7W040 W 40.4 (,5).7 (4,34).00 (,54) 7W050 W (,35).0 (4,07).0 (,57) 7W050 W (,35). (3,0).05 (0,4) 7W0503 W (,35).090 (,9).055 (,40) 7W0504 W (,35).4 (3,58).0 (,57) 7W0505 W (,0).40 (3,5).080 (,03) 7W050 W (,35).5 (3,8).095 (,4) 7W0507 W (,35).40 (3,5).094 (,39) 7W0508 W (,35).5 (3,8).0 (,57) 44 TELEPHONE: (870) / 453- micro plastics, inc. FAX: (870)

45 TABLE F OF CONTENTS FINDEX A-Z WASHES, SHOULDE WASHES AND SCEW INSULATOS IV NYLON SPECIAL FLAT WASHES ITEM NUMBE DESCIPTION A B T 7W0509 W (,35).7 (4,34).00 (,54) 7W050 W (,35).87 (4,75).30 (3,30) 7W05 W 5.50 (,35).4 (3,).0 (,79) 7W05 W 5.50 (,35).47 (3,73).5 (3,8) 7W055 W (,35).40 (3,5).50 (3,8) 7W0 W.5 (,38).5 (3,84).035 (0,88) 7W057 W (,35).5 ( 3,9).00 (,54) 7W058 W (,35).5 (3,8).50 (3,8) 7W04 W 4. (,50).87 (4,75).045 (,4) 7W059 W (,58).08 (,0).0 (,57) 7W0595 W (7,49).35 (3,43).7 (3,3) 7W075 W (,99).0 (3,05).0 (,57) 7W075 W (,8).07 (5,).05 (,7) 7W0780 W (7,0). (3,0).050 (,7) 7W078 W (7,).0 (5,33).5 (3,8) 7W08 W 8.88 (7,3).0 (3,05).040 (,0) 7W08 W 8.90 (7,38).5 (,9).047 (,9) 7W083 W (7,).0 (3,05).030 (0,7) 7W084 W 84.8 (7,4).0 (3,05).00 (0,5) 7W085 W 85.8 (7,4).0 (3,05).040 (,0) 7W08 W 8.8 (7,4).0 (3,05).00 (,5) 7W087 W (7,).55 (3,94).0 (4,0) 7W088 W 88.8 (7,4).40 (3,5).00 (0,5) 7W085 W (7,84).30 (3,30).00 (,5) 7W085 W (7,4).0 (4,0).03 (0,8) 7W08 W 8.8 (7,).90 (4,83).05 (,5) 7W095 W (7,49).0 (5,59).7 (3,3) 7W095 W (7,87).38 (3,50).030 (7,) 7W0953 W (7,87).90 (4,83).03 (0,8) 7W03 W 3.3 (7,9).87 (4,75).050 (,7) 7W03 W 3.3 (7,9).095 (,4).0 (,57) 7W033 W (8,08).30 (3,30).0 (,57) 7W034 W 34.3 (7,9).0 (,79).5 (3,8) 7W035 W 35.3 (7,9).0 (,57).5 (3,8) 7W03 W 3.3 (7,9).5 (,9).40 (3,5) 7W037 W 37.3 (7,9).40 (3,5).047 (,9) 7W038 W (8,3).5 (3,9).03 (0,79) 7W039 W 39.3 (7,9).8 (5,79).50 (,35) 7W0330 W (7,9). (4,).0 (,57) 7W033 W 33.3 (7,9).50 (3,8).00 (0,5) 7W033 W 33.3 (7,9).5 (3,8).03 (0,8) 7W0333 W (7,9).0 (,0).7 (3,3) 7W0334 W (7,9).50 (3,8).030 (0,7) 7W0335 W (7,9).9 (4,88).0 (,79) 7W033 W (7,95).7 (5,5).5 (3,8) 7W0337 W (7,9).50 (3,8).040 (,0) 7W0338 W (7,9).50 (3,8).050 (,7) 7W0339 W (7,9).50 (3,8).00 (,5) 7W034 W (7,98).0 (,79).0 (,57) mpsales@microplastics.com micro plastics, inc. WEBSITE: 45

46 TABLE F OF CONTENTS FINDEX A-Z WASHES, SHOULDE WASHES AND SCEW INSULATOS IV NYLON SPECIAL FLAT WASHES ITEM NUMBE DESCIPTION A B T 7W034 W 34.3 (7,9).0 (,0).070 (0,78) 7W0345 W (7,9).03 (,0).090 (,9) 7W0348 W (8,00).5 (3,8).03 (0,79) 7W0350 W (8,00).57 (3,98.97 (5,00) 7W03 W 3.3 (8,8).8 (3,5).0 (,57) 7W033 W (8,38).89 (4,80).080 (,03) 7W0380 W (8,3).50 (3,8).00 (,5) 7W038 W (8,5).80 (7,).95 (4,95) 7W0335 W (8,5).90 (4,83).03 (0,8) 7W034 W (,0).90 (4,83).5 (3,8) 7W0350 W (8,89).40 (,0).040 (,0) 7W03505 W (9,0).30 (3,30).0 (,57) 7W0350 W (9,04).79 (4,55).8 (3,00) 7W0350 W (8,89).0 (,0).0 (,57) 7W03540 W (8,99).9 (4,9).03 (0,79) 7W0354 W (8,97).97 (5,00).57 (3,99) 7W030 W (9,50).0 (5,59).0 (,57) 7W03750 W (9,53).50 (3,8).030 (0,7) 7W0375 W (9,53).7 (4,37).00 (,5) 7W0375 W (9,53).90 (4,83).05 (,5) 7W03753 W (9,53).3 (3,33).093 (,3) 7W03754 W (9,53).50 (,35).093 (,3) 7W03755 W (9,53).8 (5,54).03 (0,8) 7W0375 W (9,53).53 (,43).084 (,3) 7W03757 W (9,53).4 (3,58).03 (0,79) 7W03758 W (9,53).5 (3,8).040 (,0) 7W03759 W (9,53).094 (,39).8 (7,4) 7W0370 W (9,53).4 (,5).0 (,57) 7W037 W (9,53).0 (5,33).0 (4,0) 7W037 W (9,53).70 (4,3).040 (,0) 7W0373 W (9,53).70 (4,3).050 (,7) 7W0375 W (9,53).40 (3,5).080 (,03) 7W037 W (9,53).53 (3,89).03 (,0) 7W0377 W (9,58). (5,).095 (,4) 7W0378 W (9,53).50 (,35).50 (,7) 7W0379 W (9,53).0 (5,33).5 (3,8) 7W0377 W (9,53).5 (3,8).07 (,83) 7W03773 W (5,40).375 (9,53).3 (7,9) 7W0380 W (9,5).00 (5,08).030 (0,7) 7W0380 W (9,5).87 (4,75).55 (3,94) 7W0380 W (9,70).55 (,48).95 (4,95) 7W0390 W (9,9).00 (5,08).03 (0,79) 7W0390 W (9,88).5 (,37).5 (3,7) 7W03903 W (9,9).38 (8,33).079 (,0) 7W040 W (0,3).34 (5,94).0 (,57) 7W0408 W (0,3).77 (4,50).0 (,57) 7W0450 W (0,79).35 (5,97).30 (3,30) 7W04330 W (,05).09 (5,3).039 (0,99) 7W04350 W (,05).0 (5,3).87 (4,75) 7W0435 W (,05).50 (,35).094 (,39) 7W0435 W (,05).9 (4,98).04 (,7) 7W04353 W (,3).8 (5,54).5 (3,9) 7W0437 W (,0).00 (5,08).0 (,57) 4 TELEPHONE: (870) / 453- micro plastics, inc. FAX: (870)

47 TABLE F OF CONTENTS FINDEX A-Z WASHES, SHOULDE WASHES AND SCEW INSULATOS NYLON SPECIAL FLAT WASHES ITEM NUMBE DESCIPTION A B T 7W0437 W (,0).0 (,0).047 (,9) 7W04373 W (,0).95 (4,95).03 (0,79) 7W04374 W (,0).00 (5,08).5 (,9) 7W04375 W (,0).00 (5,08).090 (,9) 7W0437 W (,0).95 (4,95).00 (0,5) 7W04377 W (,0).95 (4,95).040 (,0) 7W04378 W (,0).95 (4,95).050 (,7) 7W04379 W (,0).95 (4,95).00 (,7) 7W04380 W / (,0) /3 (8,74) / (0,8) 7W0438 W (,3).5 (3,9).0 (,57) 7W00 W 0. (,8).5 (3,9).03 (0,8) 7W0 W.445 (,30).90 (7,37).033 (0,84) 7W0 W. (,8).87 (4,75).093 (,3) 7W04430 W (,5).53 (,43).5 (3,8) 7W04450 W (,43).5 (5,7).048 (,) 7W0445 W (,5).375 (9,5).0 (,57) 7W0450 W (,43).00 (5,08).048 (,) 7W0450 W (,8).50 (,35).05 (0,38) 7W0479 W (,50).09 (5,3).00 (0,5) 7W0470 W (,99).5 (,40).059 (,50) 7W047 W (,83).375 (9,53).050 (,7) 7W0475 W (,57).30 (7,87).095 (,4) 7W04950 W (,45).0 (,0).45 (,) 7W05000 W (,70).5 (4,9).075 (,9) 7W0500 W (,70).343 (8,7).09 (,77) 7W0500 W (,70).385 (9,78).0 (4,0) 7W05003 W (,45).8 (7,4).030 (0,7) 7W05004 W (,70).37 (8,05).03 (0,8) 7W05005 W (,70).375 (9,53).087 (,) 7W0500 W (,70).3 (7,9).5 (3,9) 7W05007 W (,70).50 (,35).50 (3,8) 7W05008 W (,70).88 (4,78).03 (0,8) 7W05009 W (,70).55 (,48).075 (,9) 7W0500 W (,70).3 (7,9).5 (3,8) 7W050 W (,70).5 (3,8).5 (3,8) 7W0503 W (,70).30 (8,3).70 (4,3) 7W0505 W (,70).44 (3,).5 (3,8) 7W050 W (,70).9 (5,54).5 (3,90) 7W0507 W (,70). (,5).5 (3,8) 7W0500 W (,70).30 (8,3).00 (5,08) 7W0507 W 507 (,70).30 (8,3).50 (,35) 7W0508 W (,70).30 (8,3).8 (7,4) 7W050 W (,95).93 (4,90).050 (,7) 7W0530 W (3,8).43 (,7).00 (,5) 7W055 W (3,4).375 (9,53).093 (,3) 7W055 W (3,4).40 (0,).039 (0,99) 7W0553 W (3,34).475 (,07).070 (,78) 7W0554 W (3,34).94 (4,93).03 (0,8) 7W0530 W (3,49).33 (7,95).03 (0,79) 7W05400 W (3,7).405 (0,9). (,84) 7W0545 W (3,89).33 (9,).0 (,57) 7W054 W (4,07).48 (,).030 (0,7) 7W0555 W (4,0).55 (,48).047 (,9) IV mpsales@microplastics.com micro plastics, inc. WEBSITE: 47

48 TABLE F OF CONTENTS FINDEX A-Z WASHES, SHOULDE WASHES AND SCEW INSULATOS IV NYLON SPECIAL FLAT WASHES ITEM NUMBE DESCIPTION A B T 7W050 W (4,).5 (,73).030 (0,7) 7W050 W (4,).0 (,0).5 (3,8) 7W0503 W (4,).30 (8,3).87 (4,75) 7W0505 W (4,).373 (9,47).03 (0,79) 7W050 W 50.5 (4,7).4 (3,58).0 (,57) 7W05 W 5.5 (4,7).50 (,35).03 (0,79) 7W05 W 5.5 (4,7).0 (,0).0 (,57) 7W053 W 53.5 (4,7).03 (5,).0 (,57) 7W054 W 54.5 (4,7).30 (8,3).00 (0,5) 7W059 W 59.5 (4,7).38 (8,33).095 (,4) 7W0530 W (4,35).37 (8,05).095 (,4) 7W053 W (4,43).53 (,43).093 (,3) 7W0550 W (4,35).54 (,45).094 (,39) 7W05700 W (4,8).307 (7,80).5 (3,8) 7W05980 W (5,9).39 (0,03).75 (4,45) 7W0598 W (4,7).30 (8,3).5 (3,8) 7W0598 W (4,99).38 (8,33).47 (3,73) 7W050 W 50.5 (5,.0 (,0).00 (,54) 7W05 W 5.5 (5,88).500 (,70).3 (3,35) 7W05 W 5.5 (5,).340 (8,4).5 (3,8) 7W053 W 53.5 (5,88).40 (0,3).0 (3,05) 7W00 W 0.0 (5,75).5 (,73).9 (4,89) 7W003 W 03.0 (5,75).09 (5,3).87 (4,75) 7W004 W 04.0 (5,75).350 (8,89).88 (4,78) 7W005 W 05.5 (5,88).40 (0,4).033 (8,38) 7W00 W 0.5 (5,88).0 (,0).40 (3,5) 7W0 W. (5,80).5 (,40).00 (,5) 7W0 W.5 (5,88).50 (,35).90 (4,83) 7W040 W 40.5 (5,88).505 (,83).09 (,34) 7W050 W 50.5 (5,88).5 (4,9).50 (,35) 7W05* W 5.0 (5,87).30 (7,4).039 (0,99) 7W05 W 5.5 (5,88).94 (4,93).5 (3,8) 7W053 W 53.5 (5,88).87 (4,75).0 (,57) 7W054 W 54.5 (5,88).8 (5,54).0 (,57) 7W055 W 55.5 (5,88).50 (,35).0 (,57) 7W0 W.5 (5,88).437 (,0).093 (,3) 7W057 W 57.5 (5,88).5 (3,8).0 (,57) 7W058 W 58.5 (5,88).8 (5,54).5 (3,8) 7W059 W 59.5 (5,88).8 (5,54).500 (,70) 7W00 W 0.5 (5,88).8 (5,54).50 (,35) 7W0 W.5 (5,88).390 (9,9).5 (,73) 7W0 W.5 (5,88).57 (,53).00 (0,5) 7W03 W 3.5 (5,88).8 (7,4).0 (,79) 7W04 W 4.5 (5,88).35 (8,00).03 (0,79) 7W05 W 5.5 (5,88).4 (0,7).03 (5,) 7W0 W.5 (5,88).35 (8,00).5 (3,8) 7W07 W 7.5 (5,88).8 (5,54).03 (0,79) 7W08 W 8.5 (5,88).437 (,0).50 (,35) 7W09 W 9 (5,87).8 (7,4).0 (5,33) 7W070 W 70.8 (5,70).70 (,8).0 (5,59) 7W07 W 7.30 (,00).37 (8,3).075 (,9) 7W07 W 7.5 (5,88).385 (9,78).85 (4,70) 7W073 W 73.5 (5,88).3 (7,9).50 (,35) * ID IS CHAMFEED 48 TELEPHONE (870) / 453- micro plastics, inc. FAX (870)

49 TABLE F OF CONTENTS FINDEX A-Z WASHES, SHOULDE WASHES AND SCEW INSULATOS NYLON SPECIAL FLAT WASHES ITEM NUMBE DESCIPTION A B T 7W089 W 89.5 (5,88).5 (,73).093 (,3) 7W030 W (,00).7 (4,34).00 (,5) 7W0303 W (,0).83 (7,9).077 (,9) 7W030 W (,00).80 (7,).030 (0,7) 7W0500 W (,5). (,8).5 (3,8) 7W07 W 7.7 (7,04).48 (,).03 (0,79) 7W080 W 80.8 (7,3).70 (4,3).0 (,57) 7W0830 W (7,35).337 (8,5).03 (,0) 7W085 W (7,40).0 (,0).03 (0,8) 7W0855 W (7,40).95 (7,49).0 (,57) 7W085 W (7,5).388 (9,85).059 (,50) 7W087 W (7,45).343 (8,7).03 (0,79) 7W088 W (7,45).0 (,0).00 (0,5) 7W089 W (7,45).0 (,0).050 (,7) 7W0870 W (7,45).344 (8,79).04 (,3) 7W087 W (7,45).0 (,0).00 (,5) 7W087 W (7,45).0 (,0).040 (,0) 7W0873 W (7,58).4 (0,9).03 (0,79) 7W0874 W (7,45).4 (0,9).0 (,57) 7W0875 W (7,58).507 (,88).04 (,07) 7W087 W (7,45).58 (4,43).0 (,57) 7W0877 W (7,7).390 (9,9).5 (3,8) 7W0878 W (7,45).5 (3,9).35 (3,43) 7W0879 W (7,45).80 (7,).03 (0,79) 7W0880 W (7,7).38 (8,08).87 (4,75) 7W088 W (7,48).390 (9,9).03 (0,79) 7W088 W (7,48).38 (8,08).90 (4,83) 7W0934 W (7,5).08 (,08).84 (4,7) 7W0700 W (7,78).55 (4,35).0 (,57) 7W0705 W (8,).570 (4,48).00 (,54) 7W07090 W (8,0).33 (8,53).079 (,0) 7W0709 W (8,0).4 (,7).0 (,79) 7W0709 W (7,70).53 (3,49).58 (4,0) 7W07093 W (8,03).49 (,45).5 (3,7) 7W070 W 70.7 (8,08).5 (3,30).0 (,57) 7W0730 W (8,).43 (,7).05 (,5) 7W078 W (8,4).5 (3,3).9 (5,5) 7W078 W (8,4).5 (3,3).8 (7,4) 7W079 W (8,).50 (,35).0 (,57) 7W079 W (8,).8 (7,4).0 (,57) 7W0730 W (8,9).390 (9,9).300 (7,) 7W0730 W (8,57). (,7).8 (3,00) 7W0738 W (8,80).0 (5,59).0 (3,05) 7W0740 W (8,80).340 (8,4).0 (,57) 7W0740 W (9,05).375 (9,53).0 (,57) 7W07403 W (9,00).395 (0,03).093 (,3) 7W0749 W (9,05).9 (4,85).00 (,54) 7W07493 W (8,75).0 (5,59).55 (3,94) 7W07500 W (9,05). (,3).095 (,4) 7W0750 W (9,05).87 (4,75).5 (3,9) 7W0750 W (8,7).30 (9,4).0 (4,0) 7W07503 W (9,05).33 (8,0).5 (3,8) 7W07504 W (8,75).38 (9,70).0 (4,0) IV mpsales@microplastics.com micro plastics, inc. WEBSITE: 49

50 TABLE F OF CONTENTS FINDEX A-Z WASHES, SHOULDE WASHES AND SCEW INSULATOS IV NYLON SPECIAL FLAT WASHES ITEM NUMBE DESCIPTION A B T 7W07505 W (8,79).53 (3,49).87 (4,75) 7W0750 W (9,05).390 (9,9).0 (,57) 7W07507 W (9,05).35 (8,94).03 (0,79) 7W07508 W (9,05).390 (9,9).050 (,7) 7W07509 W (9,05).390 (9,9).40 (3,5) 7W0750 W (9,05).530 (3,4).30 (5,84) 7W075 W (9,05).5 (5,88).70 (4,3) 7W075 W (9,05).385 (9,78).00 (5,08) 7W0753 W (9,05).37 (8,05).0 (,57) 7W0754 W (9,05).93 (4,90).040 (,0) 7W075 W (9,05).38 (9,70).0 (,8) 7W0757 W (9,05).40 (0,3).03 (0,8) 7W0758 W (8,9).443 (,5).095 (,4) 7W0759 W (9,05).8 (5,54).87 (4,75) 7W0750 W (8,9).0 (,0).0 (,8) 7W075 W (9,05).30 (8,3).50 (,35) 7W0753 W (8,9).0 (,0).5 (3,8) 7W0754 W (8,87).54 (3,0).093 (,3) 7W0755 W (9,05).40 (0,3).00 (5,08) 7W0757 W (9,05).375 (9,53).5 (3,8) 7W0758 W (9,05).385 (9,78).00 (0,5) 7W0759 W (9,05).3 (7,87).375 (9,53) 7W07530 W (9,05).57 (,53).0 (,57) 7W0753 W (9,8).558 (4,7).030 (0,7) 7W0753 W (9,05).50 (3,8).055 (,40) 7W07533 W (9,05).47 (,94).00 (5,08) 7W07534 W (7,40).473 (,0).90 (4,83) 7W07535 W (9,05).30 (7,).5 (3,7) 7W0750 W (9,0) 578 (4,8).0 (,79) 7W0755 W (8,9).509 (,93).50 (3,8) 7W075 W (9,05).74 (,9).5 (,35) 7W077 W (9,05).9 (7,5).03 (0,8) 7W0777 W (9,05).38 (8,33).03 (0,8) 7W0778 W (9,3).394 (0,0).5 (3,8) 7W0779 W (9,00).400 (0,).089 (,) 7W0770 W (9,3).8 (7,).3 (3,) 7W077 W (8,80).5 (5,4).095 (,4) 7W07750 W (9,9).55 (3,08).50 (,35) 7W0775 W (9,9).500 (,70).0 (3,05) 7W078 W (9,84).40 (,).03 (0,79) 7W0780 W (9,8).33 (,08).5 (3,8) 7W078 W (9,7).590 (4,99).03 (0,8) 7W07850 W (9,94).394 (0,0).080 (,03) 7W08049 W (0,45).48 (0,).0 (,57) 7W08050 W (0,45).50 (,95).0 (5,59) 7W0805 W (0,45). (5,77).5 (3,8) 7W08070 W (0,50).40 (0,).05 (,5) 7W08090 W (0,55).495 (,57).059 (,50) 7W0800 W (0,57).435 (,05).00 (,5) 7W080 W (0,75).544 (3,8).40 (3,5) 7W08 W 8.8 (0,7).95 (7,5).093 (,3) 7W08 W 8.8 (0,).30 (,00).00 (,5) 7W083 W 83.8 (0,).3 (7,9).5 (3,8) 50 TELEPHONE: (870) / 453- micro plastics, inc. FAX: (870)

51 TABLE F OF CONTENTS FINDEX A-Z WASHES, SHOULDE WASHES AND SCEW INSULATOS NYLON SPECIAL FLAT WASHES ITEM NUMBE DESCIPTION A B T 7W085 W 85.8 (0,).30 (,00).0 (5,59) 7W08 W 8.8 (0,).38 (9,80).87 (4,75) 7W085 W (0,9).480 (,9).00 (,54) 7W08400 W (,34).730 (8,54).5 (3,8) 7W08430 W (,44).5 (,).00 (,5) 7W0845 W (0,9).375 (9,53).00 (,54) 7W0850 W (,97).53 (3,49).00 (5,08) 7W085 W (,97).88 (7,48).55 (3,94) 7W080 W 80.8 (,97).43 (0,49).098 (,49) 7W08 W 8.87 (,5).437 (,0).50 (,75) 7W0875 W (,3).3 (7,9).5 (3,8) 7W0875 W (,3).408 (0,3).00 (,5) 7W08753 W (,3).57 (,53).03 (0,79) 7W08754 W (,48).343 (8,7).0 (,57) 7W08755 W (,7).3 (7,9).5 (3,8) 7W0875 W (,3).500 (,70).5 (3,8) 7W08757 W (,3).3 (7,9).87 (4,75) 7W08758 W (,97).340 (8,4).87 (4,75) 7W08759 W (,3).377 (9,58).0 (,57) 7W0870 W (,3).380 (9,5).093 (,3) 7W087 W (,3).390 (9,9).093 (,3) 7W087 W (,3).57 (,53).0 (,57) 7W0873 W (,3).7 (5,93).4 (,90) 7W0874 W 874 7/8 (,3).5 (,73).093 (,3) 7W0875 W (,0).53 (3,49).87 (4,75) 7W08800 W (,35).390 (9,9).0 (,57 7W0880 W (,5).35 (8,00).0 (,57) 7W08803 W (,40).589 (4,9).085 (,) 7W0880 W (,48).385 (9,78).0 (,57) 7W0880 W (,35).500 (,70).05 (,5) 7W088 W (,8).385 (9,78).5 (3,8) 7W08950 W (,8).55 (,48).5 (3,8) 7W0895 W (,).37 (8,05).45 (,) 7W09000 W (,8).375 (9,53).055 (,40) 7W0900 W (,8).500 (,70).075 (,9) 7W0900 W (,8).55 (3,08).00 (,5) 7W098 W (4,4).30 (5,84).5 (3,8) 7W0990 W (3,0).47 (,99). (3,0) 7W0930 W (3,7).38 (9,8).03 (0,79) 7W0937 W (3,80).5 (5,88).093 (,3) 7W0937 W (3,80).583 (4,8).0 (,57) 7W09378 W (3,80).580 (4,73).08 (,08) 7W0938 W (3,83).453 (,5).55 (3,94) 7W09400 W (3,98).33 ( 8,4).098 (,49) 7W0940 W (3,88).50 (,85).04 (,3) 7W0980 W (4,89).343 (8,7).05 (,5) 7W0984 W (4,99).40 (0,3).5 (3,8) 7W0985 W (4,97).30 (9,4).0 (3,05) 7W0985 W (5,5).4 (0,57).00 (,5) 7W09900 W (5,40).375 (9,53).0 (,57) 7W0990 W 990 (5,40).7 (9,30).0 (,57) 7W09930 W (5,).77 (9,58).4 (3,5) 7W0993 W (5,40).390 (9,9).50 (,35) IV mpsales@microplastics.com micro plastics, inc. WEBSITE: 5

52 TABLE F OF CONTENTS FINDEX A-Z WASHES, SHOULDE WASHES AND SCEW INSULATOS IV NYLON SPECIAL FLAT WASHES ITEM NUMBE DESCIPTION A B T 7W0000 W (5,40).5 (3,9).0 (,57) 7W000 W (5,40).450 (,43).5 (3,8) 7W000 W (5,40).40 (0,3).0 (,57) 7W0003 W (5,40).5 (4,7).5 (3,8) 7W0005 W (5,40). (.05).85 (4,70) 7W000 W (5,40).58 (3,).080 (,03) 7W0007 W (5,40).730 (8,54).0 (,57) 7W0008 W (5,40).3 (,03).8 (3,5) 7W0009 W (5,40).30 (8,3).375 (9,53) 7W000 W (5,40).505 (,83).5 (3,8) 7W00 W (5,40).3 (,03).05 (,5) 7W00 W (5,40).54 (,45).35 (8,) 7W003 W 003 (5,40).3 (7,9).03 (0,8) 7W004 W 004 (5,40) 5/ (7,94) 3/ (4,7) 7W005 W 005 (5,40) 7/4 (,74) 5/ (7,94) 7W00 W (5,40).500 (,70).00 (,54) 7W007 W (5,40).755 (9,8).75 (4,45) 7W005 W (5,7).35 (,3).50 (,35) 7W004 W (9,05).55 (3,08).50 (,35) 7W000 W (5,5).89 (4,80).04 (,3) 7W000 W (5,5).40 (0,4).00 (,54) 7W03 W (,9).844 (,44).040 (,0) 7W0570 W (,85).8 (0,).5 (3,8) 7W057 W 057 (5,40).844 (,44).5 (3,8) 7W00 W (,9).740 (8,80).0 (,54) 7W0 W 0.0 (,97).740 (8,80).5 (5,7) 7W05 W (,80).40 (0,3) (,35) 7W000 W (8,5).05 (5,37).39 (,07) 7W00 W 00.8 (30,00).43 (0,49).098 (,49) 7W00 W 00.7 (8,37).875 (,3).95 (4,95) 7W0 W 0.0 (8,45).390 (9,9).5 (3,8) 7W03 W 03.0 (8,45).503 (,78).033 (0,84) 7W04 W 04.0 (8,45).35 (,3).40 (3,5) 7W W. (8,47).3 (8,03).034 (0,8) 7W W.3 (8,70).3 (,00).0 (,5) 7W5 W 5.0 (8,45).540 (3,7).5 (3,8) 7W W.5 (8,58).889 (,58).00 (,5) 7W57 W 57.5 (8,58).500 (,70).0 (,57) 7W70 W 70.7 (9,7).377 (9,58).5 (3,8) 7W750 W (9,85).30 (7,87).5 (3,8) 7W800 W (30,07).477 (,).079 (,0) 7W03 W (30,5).984 (4,99).050 (,7) 7W03 W 03.8 (3,57).88 (,35).0 (,57) 7W8 W 8.8 (30,94).03 (,9).040 (,0) 7W50 W 50.5 (3,).43 (,33).00 (,54) 7W5 W 5.45 (3,).00 (5,43).03 (0,79) 7W50 W (3,37).35 (9,7).0 (,79) 7W50 W (3,75).875 (,3).5 (3,8) 7W503 W (3,75).75 (9,43).080 (,03) 7W504 W (3,75).5 (3,).0 (,57) 7W505 W (3,8).390 (9,9).045 (,4) 7W50 W (3,75).50 (,35).55 (,48) 7W507 W (3,75).805 (0,45).00 (,5) 5 TELEPHONE: (870) / 453- micro plastics, inc. FAX: (870)

53 TABLE F OF CONTENTS FINDEX A-Z WASHES, SHOULDE WASHES AND SCEW INSULATOS NYLON SPECIAL FLAT WASHES ITEM NUMBE DESCIPTION A B T 7W508 W (3,75).8 (7,4).03 (,0) 7W509 W 509 (3,75) 9/ (4,9) /3 (0,79) 7W50 W (3,75).8 (0,).080 (,03) 7W5 W 5 7/4 (3,3).390 (9,90).5 (3,9) 7W5 W 5.50 (3,75).380 (7,).5 (3,8) 7W53 W (3,75).30 (7,87).0 (3,05) 7W55 W 55.0 (3,00).340 (8,4).50 (,35) 7W57 W (3,75).57 (,53).55 (,48) 7W W (3,75).50 (,35).0 (,57) 7W580 W (3,95). (5,74).05 (,5) 7W593 W (3,75).00 (,54).00 (,5) 7W04 W 04.7 (3,3).400 (0,).0 (,57) 7W30 W (33,7).45 (,38).0 (3,05) 7W30 W 30.3 (33,3).000 (5,40).9 (4,85) 7W3 W 3.3 (33,3).088 (7,3).0 (,57) 7W3 W 3.3 (33,3).000 (5,40).5 (3,8) 7W35 W 35.3 (33,3).0 (,0).9 (4,85) 7W3749 W (4,80).380 (7,5).5 (3,8) 7W3750 W (34,93).50 (,35).04 (7,3) 7W375 W (34,93).55 (3,34).5 (3,8) 7W375 W (34,93).50 (,95).0 (,57) 7W3753 W (34,93).5 (,).5 (3,8) 7W3754 W (34,93).330 (8,3).5 (3,8) 7W3755 W (33,7).938 (3,8).040 (,0) 7W375 W (34,).53 (3,8).05 (,30) 7W3757 W (34,93).450 (,43).090 (,9) 7W3758 W (34,93).530 (3,4).73 (4,39) 7W3759 W (34,93).05 (5,78).5 (3,8) 7W450 W (3,07).70 (9,30).00 (,54) 7W45 W (35,43).50 (,35).8 (3,00) 7W437 W (3,50).000 (5,40).09 (,75) 7W450 W (3,83).000 (5,40).03 (,5) 7W40 W (37,03).80 (9,97).00 (,54) 7W48 W (37,9).55 (3,08).050 (,7) 7W4930 W (38,0).437 (,0).30 (3,30) 7W5000 W (38,0).88 (4,75).08 (,7) 7W500 W (38,0).5 (,89).094 (,39) 7W500 W (38,0).500 (,70).5 (3,8) 7W5003 W (38,0).375 (9,53).375 (9,53) 7W5004 W (38,0).755 (9,8).5 (3,8) 7W5005 W (38,0).9 (7,8).0 (3,05) 7W500 W (37,85).5 (3,3).0 (3,05) 7W5007 W (40,0).59 (,74).8 (3,00) 7W5008 W (38,0).05 (5,78).080 (,03) 7W50 W (38,0).505 (,83).30 (3,30) 7W503 W (38,0).55 (3,08).437 (,0) 7W5050 W (38,3).750 (9,05).053 (,35) 7W505 W (37,85).8 (0,57).0 (,57) 7W505 W (39,87).5 (3,00).8 (3,00) 7W50 W (39,70).000 (5,40).0 (,57) 7W55 W 55-9/ (39,70).30 (,00).0 (,57) 7W40 W 40.9 (4,).495 (37,97).45 (,) 7W50 W 50.5 (4,8).53 (3,49).3 (7,9) IV TELEPHONE (870) / 453- micro plastics, inc. FAX (870)

54 IV Q TABLE OF CONTENTS FINDEX A-Z WASHES, SHOULDE WASHES AND SCEW INSULATOS NYLON SPECIAL FLAT WASHES ITEM NUMBE DESCIPTION A B T 7W5 W 5.5 (4,8).375 (34,93).0 (,79) 7W5 W 5.5 (4,8).0 (5,40).87 (4,75) 7W300 W (4,53).405 (35,9).093 (,3) 7W54 W (4,9).395 (35,43).40 (3,5) 7W900 W (43,05).55 (3,88).05 (,5) 7W78 W (43,4).5 (5,88).050 (,7) 7W74 W (43,79).500 (38,0).03 (0,8) 7W75 W (3,90).97 (7,70).00 (,54) 7W75 W (37,85).75 (9,43).00 (,54) 7W7500 W (44,45).98 (3,57).75 (,99) 7W800 W (45,7).948 (4,08).057 (,45) 7W8500 W (4,99).08 (,).0 (3,05) 7W900 W (48,4).500 (38,0).093 (,3) 7W000 W (5,05).8 (3,5).35 (3,43) 7W000 W (50,80).50 (,95).00 (,5) 7W0003 W (50,80).55 (38,75).00 (,5) 7W0004 W (50,80).080 (7,43).0 (4,0) 7W000 W (50,80).30 (,00).5 (3,8) 7W00 W (50,4).55 (38,75).5 (3,8) 7W003 W (50,80).35 (33,).30 (7,87) 7W00 W 00 (50,80).805 (0,45).0 (,57) 7W000 W (5,3).800 (45,7).055 (,40) 7W350 W 350 9/4 (54,3).70 (44,70).30 (3,30) 7W850 W (55,37).40 (3,07).050 (,7) 7W005 W (5,0).70 (43,9).050 (,7) 7W500 W (57,40).00 (5,5).075 (,9) 7W800 W (57,79).75 (3,39).0 (3,05) 7W500 W (3,50).075 (7,3).5 (3,8) 7W5003 W (3,50).750 (44,45).5 (3,8) 7W80 W 80.9 (8,33).93 (49,0).5 (3,8) 7W9300 W (74,4). (,05).50 (3,8) 7W9503 W (74,93).5 (9,).093 (,54) 7W30000 W (7,0).70 (3,).093 (,3) 7W3000 W (75,44).490 (37,85).5 (3,8) 7W30073 W (7,).80 (7,).07 (,83) 7W30093 W (7,07).5 (4,8).093 (,3) 7W350 W (79,55).8 (0,).5 (3,8) 7W300 W (8,80).0 (,55).0 (,57) NYLON SCEW INSULATOS AE DESIGNED TO : POTECT THE HEAD OF A TAL SCEW FOM ELECTICAL CONTACT. ACCOODATE THE MOST COON SCEW HEAD-STYLES INCLUDING: CHEESE, PAN AND FILLISTE, IN SIZES FOM #4 TO. CUP WASHES AE MOLDED FOM TOUGH, ELECTICALLY INSULATING NYLON /. NYLON CUP WASHES ITEM NUMBE A B C D E CW CW00040 CW CW00040 CW (7,7).30 (9,4).44 (0,5).470 (,94).595 (5,).45 (,).300 (7,).354 (8,99).40 (0,4).535 (3,59).5 (,9).40 (3,5).7 (4,34).94 (4,93).57 (,53).7 (,97).4 (3,). (4,).90 (4,83).47 (,7).57 (3,99).8 (4,).0 (5,3).30 (5,85).87 (7,9) 54 TELEPHONE: (870) / 453- micro plastics, inc. FAX: (870)

55 TABLE F OF CONTENTS FINDEX A-Z WASHES, SHOULDE WASHES AND SCEW INSULATOS NYLON SCEW INSULATOS ITEM NUMBE DESCIPTION L A B C D 0SC000 SC /8 (3,8).8 (4,0) 3/4 (,9).0 (3,05).090 (,9) 0SC0008 SC 3/ (4,7).8 (4,0) 3/4 (,9).0 (3,05).090 (,9) 0SC0005 SC (,35).8 (4,0) 3/4 (,9).0 (3,05).090 (,9) 0SC00037 SC (9,53).8 (4,0) 3/4 (,9).0 (3,05).090 (,9) 0SC SC 4 /3 (0,79).35 (5,97) 3/4 (,9).45 (3,8).5 (,9) 0SC SC 4 3/4 (,9).35 (5,97) 3/4 (,9).45 (3,8).5 (,9) 0SC00400 SC 4 / (,59).35 (5,97) 3/4 (,9).45 (3,8).5 (,9) 0SC SC 4 3/3 (,38).35 (5,97) 3/4 (,9).45 (3,8).5 (,9) 0SC0040 SC 4 /8 (3,8).35 (5,97) 3/4 (,9).45 (3,8).5 (,9) 0SC00405 SC 4 5/3 (3,97).35 (5,97) 3/4 (,9).45 (3,8).5 (,9) 0SC00408 SC 4 3/ (4,7).35 (5,97) 3/4 (,9).45 (3,8).5 (,9) 0SC00405 SC 4 (,35).35 (5,97) 3/4 (,9).45 (3,8).5 (,9) 0SC SC 4 (9,53).35 (5,97) 3/4 (,9).45 (3,8).5 (,9) 0SC SC 4 (,70).35 (5,97) 3/4 (,9).45 (3,8).5 (,9) 0SC00004 SC 3/4 (,9).90 (7.37) 3/4 (.9).70 (4,3).40 (3,5) 0SC0000 SC / (,59).90 (7,37) 3/4 (,9).70 (4,3).40 (3,5) 0SC00009 SC 3/3 (,38).90 (7,37) 3/4 (,9).70 (4,3).40 (3,5) 0SC000 SC /8 (3,8).90 (7,37) 3/4 (,9).70 (4,3).40 (3,5) 0SC0005 SC 5/3 (3,97).90 (7,37) 3/4 (,9).70 (4,3).40 (3,5) 0SC0008 SC 3/ (4,7).90 (7,37) 3/4 (,9).70 (4,3).40 (3,5) 0SC0005 SC (,35).90 (7,37) 3/4 (,9).70 (4,3).40 (3,5) 0SC00037 SC (9,53).90 (7,37) 3/4 (,9).70 (4,3).40 (3,5) 0SC00050 SC (,70).90 (7,37) 3/4 (,9).70 (4,3).40 (3,5) 0SC0080 SC 8 /8 (3,8).344 (8,74) / (,59).05 (5,).73 (4,39) 0SC00804 SC 8 9/4 (3,58).344 (8,74) / (,59).05 (5,).73 (4,39) 0SC00805 SC 8 (,35).344 (8,74) / (,59).05 (5,).73 (4,39) 0SC SC 8 (9,53).344 (8,74) / (,59).05 (5,).73 (4,39) 0SC SC 8 (,70).344 (8,74) / (,59).05 (5,).73 (4,39) 0SC0080 SC 8 (5,88).344 (8,74) / (,59).05 (5,).73 (4,39) 0SC SC 8 (9,05).344 (8,74) / (,59).05 (5,).73 (4,39) 0SC0000 0SC0004 0SC0008 0SC0005 0SC00037 SC 0 SC 0 SC 0 SC 0 SC 0 / 9/4 3/ (,59) (3,58) (4,7) (,35) (9,53).399 (0,3).399 (0,3).399 (0,3).399 (0,3).399 (0,3) / (,59) / (,59) / (,59) / (,59) / (,59).0 (,0).0 (,0).0 (,0).0 (,0).0 (,0).00 (5,08).00 (5,08).00 (5,08).00 (5,08).00 (5,08) 0SC SC0005 0SC000 0SC00075 SC 0 SC 0 SC 0 SC 0 (,70) 9/ (4,9) (5,88) (9,05).399 (0,3).399 (0,3).399 (0,3).399 (0,3) / (,59) / (,59) / (,59) / (,59).0 (,0).0 (,0).0 (,0).0 (,0).00 (5,08).00 (5,08).00 (5,08).00 (5,08) 0SC500 SC 50 /8 (3,8).53 (3,03) / (,59).3 (7,9).0 (,0) 0SC5004 SC 50 9/4 (3,58).53 (3,03) / (,59).3 (7,9).0 (,0) 0SC5008 SC 50 3/ (4,7).53 (3,03) / (,59).3 (7,9).0 (,0) 0SC5005 SC 50 (,35).53 (3,03) / (,59).3 (7,9).0 (,0) 0SC50037 SC 50 (9,53).53 (3,03) / (,59).3 (7,9).0 (,0) 0SC50050 SC 50 (,70).53 (3,03) / (,59).3 (7,9).0 (,0) 0SC500 SC 50 (5,88).53 (3,03) / (,59).3 (7,9).0 (,0) 0SC50075 SC 50 (9,05).53 (3,03) / (,59).3 (7,9).0 (,0) 0SC30 0SC305 0SC3037 SC 3 SC 3 SC 3 /8 (3,8) (,35) (9,53).0 (5,75).0 (5,75).0 (5,75) / (,59) / (,59) / (,59).30 (9,4).30 (9,4).30 (9,4).30 (8,3).30 (8,3).30 (8,3) 0SC3050 0SC30 SC 3 SC 3 (,70) (5,88).0 (5,75).0 (5,75) / (,59) / (,59).30 (9,4).30 (9,4).30 (8,3).30 (8,3) NYLON SCEW INSULATOS AE USED TO : ISOLATE TAL SCEWS ELECTICALLY EDUCE COOSION IV SCEW INSULATOS MAY ALSO BE USED AS LIGHT LOAD BEAINGS IN MANY APPLICA- TIONS. SPECIFY SCEW SIZE AND LENGTH WHEN ODEING. SPECIALS CAN MADE TO ODE FO A SMALL TOOLING CHAGE mpsales@microplastics.com micro plastics, inc. WEBSITE: 55

56 TABLE F OF CONTENTS FINDEX A-Z WASHES, SHOULDE WASHES AND SCEW INSULATOS IV NYLON SHOULDE WASHES AE SUIT- ABLE FO A LAGE VAIETY OF INSULA- TION AND CHANICAL APPLICATIONS. THEY SEAL EDUCE VIBATION ACT AS SPACES AND GUIDES STONG AND COOSION ESISTANT NYLON SHOULDE WASHES ITEM NUMBE DESCIPTION L A B C D SWS05 SWS 5 3/4 (,9).05 (,7) 3/4 (,9).084 (,3).0 (,55) SWS055 SWS (,5).5 (3,8).030 (0,7).080 (,03).055 (,40) SWS05 SWS 5 /3 (0,79).8 (5,79) /3 (0,79). (3,0).093 (,3) SWS057 SWS (0,89).35 (5,97).095 (,4).47 (3,73).5 (,9) SWS058 SWS (,35).87 (4,75).047 (,9).0 (3,05).090 (,9) SWS080 SWS (,9).8 (4,0) 3/4 (,9).0 (3,05).045 (,4) SWS08 SWS 8 /3 (0,79).8 (4,75) / (,59).3 (3,33).085 (,) SWS083 SWS 83 /3 ( 0,79).8 (4,) 5/4 (,98).5 (3,8).085 (,) SWS084 SWS 84 /3 (0,79).89 (4,80) / (,59).9 (3,0).095 (,4) SWS087 SWS 87 /4 (0,4).87 (4,75) /3 (0,79).9 (3,0).089 (,) SWS088 SWS (0,7).87 (4,75).030 (0,7).3 (3,33).090 (,9) SWS089 SWS 89.0 (0,5).87 (4,75).030 (0,7).9 (3,0).090 (,9) SWS090 SWS 90 9/3 (7,4).97 (5,00) /3 (0,79).8 (3,00).075 (,9) SWS09 SWS 9.00 (,54).350 (8,89).090 (,9).00 (5,08).40 (3,5) SWS095 SWS 95 / (,59).95 (4,95) /3 (0,79).0 (3,05).093 (,3) SWS09 SWS 9 3/4 (,9).40 (,09) / (,59).35 (3,4).4 (,89) SWS097 SWS 97 /3 (0,79). (5,48) 3/4 (,9).35 (3,4).5 (,9) SWS098 SWS 98 /3 (0,79).00 (5,08) /3 (0,79).40 (3,5).5 (,9) SWS099 SWS 99 5/4 (,98).87 (4,75) /3 (0,79).9 (3,0).03 (,0) SWS000 SWS 00 /3 (0,79).00 (5,08) 5/4 (,98).35 (3,43). (,95) SWS00 SWS 0 3/ ( 4,7).87 (4,75) /3 (0,79).9 (3,0).03 (,0) SWS00 SWS 0 5/4 (,98).05 (5,) /3 (0,79).5 (3,8).093 (,3) SWS003 SWS 03 7/4 (,77).05 (5,) /3 (0,79).5 (3,8).093 (,3) SWS004 SWS 04 3/ (4,7).05 (5,) /3 (0,79).5 (3,8).093 (,3) SWS005 SWS 05 3/4 (,9).0 (5,3) /4 (0,4).45 (3,8).0 (3,05) SWS00 SWS 0 / (,59).4 (5,9) /3 (0,79).54 (3,9).0 (3,05) SWS007 SWS 07 5/3 (3,97).35 (5,97) 3/4 (,9).35 (3,43).0 (,79) SWS008 SWS 08 / (,59).00 (5,08) /3 (0,79).0 (3,05).093 (,3) SWS009 SWS 09 3/4 (,9).0 (5,33) /4 (0,4).45 (3,8).0 (3,05) SWS00 SWS 0 3/4 (,9).30 (5,84) /4 (0,4).4 (3,). (3,0) SWS0 SWS /3 (0,79).8 (5,54) 3/4 (,9).35 (3,43).5 (,9) SWS0 SWS 7/ (,).4 (5,9) /3 (0,79).54 (3,9).0 (3,05) SWS03 SWS 3 3/4 (,9).00 (5,08) /3 (0,79).38 (3,5).09 (,77) SWS04 SWS 4 /3 (0,79).35 (5,97) 3/4 (,9).37 (3,48).5 (,77) SWS05 SWS 5 7/3 (5,55).50 (,35) /4 (4,37).50 (3,8).5 (,9) SWS0 SWS /3 (0,79).40 (,0) /3 (0,79).50 (3,8).098 (,49) SWS07 SWS 7 /3 (0,79).8 (5,79) 3/4 (,9).38 (3,5).00 (,54) SWS08 SWS 8 /8 (3,8).4 (,5) 3/4 (,9).40 (3,5).5 (,9) SWS09 SWS 9 /8 (3,8).90 (7,37) /4 (0,4).50 (,35).93 (4,90) SWS00 SWS 0 3/4 (,9).34 (5,94) 3/4 (,9).47 (3,73).5 (,9) SWS0 SWS 3/3 (,38).35 (5,97) 3/4 (,9).45 (3,8).5 (,9) SWS0 SWS /8 (3,8).35 (5,97) 3/4 (,9).45 (3,8).5 (,9) SWS03 SWS 3 /3 (0,79).50 (,35) / (,59).87 (4,75).40 (3,5) SWS04 SWS 4 3/4 (,9).0 (,0) / (,59).90 (4,83).40 (3,5) SWS05 SWS 5 43/4 (7,0).50 (,35) 3/4 (,9).87 (4,75).095 (,4) SWS0 SWS / (,59).50 (,35) /3 (0,79).43 (3,3).8 (3,00) SWS07 SWS 7 /3 (0,79).57 (,53) / (,59).87 (4,75).4 (3,58) SWS08 SWS 8 /4 (0,4).0 (,0) /4 (0,4).54 (3,9).095 (,4) SWS09 SWS 9 /8 (3,8).50 (,35) 3/4 (,9).39 (3,53).8 (3,00) SWS030 SWS 30 5/3 (3,97).5 (,73) /3 (0,79).05 (5,).4 (3,) SWS03 SWS 3 5/4 (,98).53 (,4) 3/4 (,9).3 (3,45).0 (3,05) SWS033 SWS 33 /3 (0,79).03 (5,) 3/4 (,9).40 (3,5).5 (,9) SWS034 SWS (,40).39 (,07).00 (0,5).39 (3,53). (,95) 5 TELEPHONE: (870) / 453- micro plastics, inc. FAX: (870)

57 TABLE F OF CONTENTS FINDEX A-Z WASHES, SHOULDE WASHES AND SCEW INSULATOS NYLON SHOULDE WASHES ITEM NUMBE DESCIPTION L A B C D SWS035 SWS (0,84.0 (5,33).04 (,07).43 (3,3). (,95) SWS03 SWS 3.00 (0,5).50 (,35).030 (0,7).50 (3,8). (,9) SWS037 SWS (,0).35 (5,97).047 (,9).47 (3,73).5 (,9) SWS038 SWS (0,7).30 (5,84).040 (,0).50 (3,8).5 (3,8) SWS039 SWS (,9).4 (5,9).08 (0,7).54 (3,9).0 (3,05) SWS040 SWS (,54).30 (5,84).05 (0,4).90 (4,83).50 (3,8) SWS04 SWS 4.55 (3,94).4 (5,9).08 (0,7).54 (3,9).0 (3,05) SWS04 SWS 4 3/3 (,38).35 (,3) 9/4 (3,57).45 (0,80).0 (5,) SWS043 SWS (,0) 5/4 (5,94).05 (0,4).4 (4,7).30 (3,30) SWS044 SWS (0,79).34 (5,94).05 (0,4).45 (3,8).5 (,9) SWS045 SWS (,3).35 (5,97).50 (,35).45 (3,8).5 (,9) SWS04 SWS 4.07 (0,9).40 (,0).047 (,9).34 (3,40).5 (,9) SWS047 SWS 47 3/4 (,9).5 (,40) 3/4 (,9).40 (3,5).5 (,9) SWS050 SWS 50.5 (3,9).5 (,73) 8 (3,00).05 (5,).4 (3,) SWS055 SWS 55 /8 (,94).500 (,70) /8 (,94).375 (9,53).85 (7,4) SWS090 SWS 90 /3 (0,79).90 (7,37) 3/4 (,9).70 (4,3).40 (3,5) SWS09 SWS (9,53).90 (7,37).34 (5,94).70 (4,3).40 (3,5) SWS09 SWS (9,53).499 (,7).5 (3,8).95 (7,49).87 (4,75) SWS0300 SWS (,9).50 (,35).050 (,7).50 (3,8).0 (3,05) SWS0305 SWS (3,05).50 (,35).050 (,7).35 (3,43).8 (3,00) SWS030 SWS 30.0 (,57).50 (,35).03 (0,79).50 (3,8). (,95) SWS030 SWS (,35).50 (,35).047 (,9).5 (3,9).5 (3,8) SWS0395 SWS (0,4).50 (,35).03 (0,79). (3,0).093 (,3) SWS039 SWS (,0).50 (,35).047 (,9).40 (3,5).0 (,59) SWS0400 SWS 400 3/3 (,38).35 (5,97) 3/4 (,9).40 (3,5).5 (,9) SWS040 SWS 40 (,35).35 (5,97) 3/4 (,9).45 (3,8).5 (,9) SWS040 SWS 40 3/4 (,9).40 (,09) / (,59).38 (3,50).4 (,89) SWS0403 SWS 403 / (,59).3 (7,93) / (,59).49 (3,79).5 (,9) SWS0404 SWS 404 3/3 (,38).3 (7,93) / (,59).49 (3,79).5 (,9) SWS0405 SWS 405 /4 (0,4).50 (,35) 3/4 (,9).4 (3,5). (,8) SWS040 SWS 40 /3 (0,79).5 (,40) /3 (0,79).8 (4,7).40 (3,5) SWS0407 SWS 407 /3 (0,79).50 (,35) /3 (0,79).8 (4,7).39 (3,53) SWS0408 SWS (,35).35 (5,97).03 (0,8).0 (3,05).090 (,9) SWS0409 SWS 409 /8 (3,8).50 (,35) /3 (0,79).95 (4,95).30 (3,30) SWS040 SWS 40 /3 (0,79).50 (,35) 3/4 (,9).4 (,90).00 (,54) SWS04 SWS 4 / (,59).50 (,35) /3 (0,79).43 (3,3).5 (,9) SWS04 SWS 4 / (,59).50 (,35) /3 (0,79).9 (4,9).0 (,59) SWS043 SWS 43 3/3 (,38).50 (,35) 3/4 (,9).4 (,90).00 (,54) SWS044 SWS 44 /8 (3,8).8 (7,4) 3/3 (,38).58 (4,0).093 (,3) SWS045 SWS 45 3/ (4,7).93 (7,44) 3/4 (,9).8 (5,53).38 (3,5) SWS04 SWS 4 /4 (4,37).50 (,35) 3/4 (,9).8 (4,7). (3,0) SWS047 SWS 47 /4 (0,4).30 (7,87) / (,59).83 (4,5).39 (3,53) SWS048 SWS 48 /4 (0,4).3 (7,93) / (,59).87 (4,75).5 (,9) SWS049 SWS 49 /3 (0,79).3 (7,93) /3 (0,79).85 (4,70).40 (3,5) SWS040 SWS 40 / (,59).3 (7,93) / (,59).70 (4,3).0 (3,05) SWS04 SWS 4 3/4 (,9).3 (7,93) / (,59).70 (4,3).7 (3,3) SWS04 SWS 4 /8 (3,8).3 (7,93) 3/4 (,9).34 (5,94).44 (3,) SWS043 SWS 43 /4 (0,4).50 (,35) /3 (0,79).50 (3,8). (,95) SWS044 SWS 44 7/3 (5,55).95 (7,49) /3 (0,79).34 (5,94).40 (3,5) SWS045 SWS 45 /3 (0,79).3 (7,93) / (,59).50 (,35).9 (4,98) SWS04 SWS 4 /4 (4,37).50 (,35) 3/4 (,9).45 (3,8).5 (,9) SWS047 SWS 47 3/4 (,9).50 (,35) /3 (0,79).85 (4,70). (,95) SWS048 SWS 48 7/4 (,77).4 (,5) 3/4 (,9).40 (3,5).5 (,9) IV NYLON SHOULDE WASHES AE SUIT- ABLE FO A LAGE VAIETY OF INSULA- TION AND CHANICAL APPLICATIONS. THEY SEAL EDUCE VIBATION ACT AS SPACES AND GUIDES STONG AND COOSION ESISTANT mpsales@microplastics.com micro plastics, inc. WEBSITE: 57

58 TABLE F OF CONTENTS FINDEX A-Z WASHES, SHOULDE WASHES AND SCEW INSULATOS IV NYLON SHOULDE WASHES AE SUIT- ABLE FO A LAGE VAIETY OF INSULA- TION AND CHANICAL APPLICATIONS. THEY SEAL EDUCE VIBATION ACT AS SPACES AND GUIDES STONG AND COOSION ESISTANT NYLON SHOULDE WASHES ITEM NUMBE DESCIPTION L A B C D SWS049 SWS0430 SWS043 SWS043 SWS0433 SWS0434 SWS0435 SWS043 SWS0437 SWS0438 SWS0439 SWS0 SWS044 SWS044 SWS0443 SWS0444 SWS0445 SWS044 SWS0448 SWS0449 SWS0450 SWS045 SWS045 SWS0453 SWS0454 SWS0455 SWS045 SWS0457 SWS0459 SWS040 SWS04 SWS043 SWS044 SWS045 SWS047 SWS048 SWS049 SWS0470 SWS0475 SWS00 SWS00 SWS003 SWS005 SWS00 SWS007 SWS008 SWS009 SWS00 SWS0 SWS04 SWS05 SWS0 SWS08 SWS 49 SWS 430 SWS 43 SWS 43 SWS 433 SWS 434 SWS 435 SWS 43 SWS 437 SWS 438 SWS 439 SWS SWS 44 SWS 44 SWS 443 SWS 444 SWS 445 SWS 44 SWS 448 SWS 449 SWS 450 SWS 45 SWS 45 SWS 453 SWS 454 SWS 455 SWS 45 SWS 457 SWS 459 SWS 40 SWS 4 SWS 43 SWS 44 SWS 45 SWS 47 SWS 48 SWS 49 SWS 470 SWS 475 SWS 0 SWS 0 SWS 03 SWS 05 SWS 0 SWS 07 SWS 08 SWS 09 SWS 0 SWS SWS 4 SWS 5 SWS SWS 8 9/4 (3,58) 3/ (4,7) 3/3 (,38) 3/4 (,9) 7/4 (,77) / (,59) 3/4 (,9) /3 (0,79) /3 (0,79) /3 (0,79) / (,59) 5/ (7,94) 3/ (4,7) 7/3 (5,54).5 (3,9) / (,59) /3 (0,79) /4 (0,4) 3/3 (,38) /3 (0,79) / (,59) /3 (0,79) /3 (0,79).07 (0,9) /3 (0,79) 3/4 (,9) 3/4 (,9).03 (0,79) 5/4 (5,94).5 (3,8).03 (0,79).050 (,7) 9/4 (7,5).00 (,5).0 (,57).50 (,35). (3,0).5 (0,79).00 (,54) (,35) /3 (0,79).0 (,57) 3/4 (,9) 3/4 (,9) / (,59) 3/4 (,9) 3/4 (,9) / (,59) 3/3 (,38) /3 (0,79).05 (,5) 3/3 (,38) (9,53).50 (,35).3 (7,93).40 (,0).50 (,35).50 (,35).3 (7,93).50 (,35).40 (,0).5 (,73).3 (7,93).50 (,35).3 (7,93).3 (7,93).9 (7,5).5 (,40).300 (7,).33 (7,95).3 (7,93).3 (7,93).33 (7,95).3 (7,93).35 (8,00).3 (7,93).3 (7,93).33 (7,95).3 (7,93).50 (,35).50 (,35).9 (7,39).90 (7,37).3 (7,93).3 (7,93).50 (,35).3 (7,93).3 (7,93).3 (7,93).388 (9,85).90 (7,37).3 (7,93).90 (7,37).330 (8,38).300 (7,).38 (8,33).340 (8,4).89 (7,34).90 (7,37).3 (7,93).348 (8,83).3 (8,03).34 (8,3).30 (8,3).340 (8,4).345 (8,7) 3/4 (,9) / (,59) /3 (0,79) 3/4 (,9) 3/4 (,9) 3/4 (,9) / (,59) 3/4 (,9) /3 (0,79) / (,59) 3/4 (,9) /3 (0,79) /3 (0,79) /3 (0,79).047 (,9) 3/4 (,9) /3 (0,79) 3/4 (,9) 3/4 (,9) /3 (0,79) 3/4 (,9).030 (0,7) 3/4 (,9).035 (0,89) /3 (0,79) /3 (0,79) 3/4 (,9).03 (0,79) / (,59).047 (,9).03 (,0).04 (,7) 3/4 (,9).030 (0,7).03 (,0).00 (,5).87 (4,75).047 (,9).045 (,4) 3/4 (,9) / (,59).050 (,7) 3/4 (,9) 5/4 (,98) / (,59) 3/4 (,9) /3 (0,79) /3 (0,79) 3/4 (,9) / (,59).050 (,7) / (,59) / (,59).45 (3,8).50 (,35).85 (4,70).43 (3,3).45 (3,8).70 (4,3).85 (4,70).39 (3,53).57 (3,99).87 (4,75).38 (3,50).54 (3,9).34 (5,94).35 (5,97).40 (3,5).94 (4,93).75 (4,45).0 (4,0).87 (4,75).9 (5,5).34 (5,94).50 (3,8).03 (5,).87 (4,75).9 (5,5).85 (4,70).5 (3,9).87 (4,75).54 (3,9).70 (4,3).87 (4,75).9 (5,8).45 (3,8).89 (4,80). (3,0).0 (5,33).07 (5,).00 (5,08).50 (3,8).70 (4,3).0 (5,3).80 (4,57).8 (5,54).50 (,35).5 (5,4).70 (4,3).85 (4,70).90 (7,3).58 (4,0).04 (5,8).8 (4,).0 (5,59).05 (5,).5 (,9).5 (3,9).5 (3,8).3 (,87).5 (,9).40 (3,5). (,95).5 (,9). (3,0).4 (3,58).0 (3,05).30 (3,30).84 (4,7).35 (3,43).5 (,9).0 (4,0).43 (3,3).097 (,4).8 (3,5).4 (3,5).44 (3,).5 (,9).0 (3,05).40 (3,5).3 (3,45). (3,0).5 (,9).0 (3,05).0 (3,05).40 (3,5).3 (3,).3 (4,3).5 (,9).44 (3,).09 (0,3).4 (3,).0 (4,0).45 (3,8).4 (,90).40 (3,5).4 (3,58).50 (3,8).4 (3,7).40 (3,5).093 (,3).40 (3,5). (,95). (,50). (,95).40 (3,5).4 (3,58).75 (4,45).73 (4,39) 58 TELEPHONE: (870) / 453- micro plastics, inc. FAX: (870)

59 TABLE F OF CONTENTS FINDEX A-Z WASHES, SHOULDE WASHES AND SCEW INSULATOS NYLON SHOULDE WASHES ITEM NUMBE DESCIPTION L A B C D SWS09 SWS030 SWS0 SWS033 SWS034 SWS0798 SWS0799 SWS0800 SWS080 SWS080 SWS0803 SWS0804 SWS0805 SWS080 SWS0807 SWS0808 SWS0809 SWS080 SWS08 SWS08 SWS083 SWS084 SWS085 SWS08 SWS087 SWS088 SWS089 SWS080 SWS08 SWS08 SWS083 SWS084 SWS085 SWS08 SWS087 SWS088 SWS089 SWS0830 SWS083 SWS0 SWS0833 SWS0834 SWS0835 SWS0837 SWS0839 SWS0840 SWS084 SWS084 SWS0844 SWS084 SWS0847 SWS0848 SWS0850 SWS 9 SWS 30 SWS SWS 33 SWS 34 SWS 798 SWS 799 SWS 800 SWS 80 SWS 80 SWS 803 SWS 804 SWS 805 SWS 80 SWS 807 SWS 808 SWS 809 SWS 80 SWS 8 SWS 8 SWS 83 SWS 84 SWS 85 SWS 8 SWS 87 SWS 88 SWS 89 SWS 80 SWS 8 SWS 8 SWS 83 SWS 84 SWS 85 SWS 8 SWS 87 SWS 88 SWS 89 SWS 830 SWS 83 SWS SWS 833 SWS 834 SWS 835 SWS 837 SWS 839 SWS 840 SWS 84 SWS 84 SWS 844 SWS 84 SWS 847 SWS 848 SWS 850 3/4 (,9) 3/4 (5,) / (,59).00 (,5) /4 (4,37).080 (,03) 3/4 (,9) 9/4 (3,58) (9,53) / (,59) 3/3 (0,3).77 (4,50).83 (7,9).50 (,.35).04 (,7) /8 (3,8) 5/3 (3,97) /3 (0,79) 3/4 (,9) 3/3 (,38) 7/4 (,77) 3/4 (,9) 3/3 (,38) /3 (0,79) 3/4 (,9) /3 (0,79) / (,59) /3 (0,79) /3 (0,79) /3 (0,79).099 (,5).05 (,7).00 (,5).0 (,57).04 (,7).5 (3,8) /8 (3,8).03 (0,8).50 (,35).043 (,09).050 (,7).05 (0,38).050 (,7).03 (0.79).050 (,7) 3/4 (5,) /8 (3,7) 5/4 (,98) 3/4 (,9) / (,59).3 (5,4) /3 (0,79) / (,59).345 (8,7).38 (9,34).349 (8,87).349 (8,87).350 (8,89).344 (8,74).344 (8,74).344 (8,74).344 (8,74).375 (9,53).50 (,95).355 (9,0).370 (9,40).344 (8,.74).359 (9,).375 (9,53).378 (9,0).375 (9,53).375 (9,53).375 (9,53).375 (9,53).375 (9,53).375 (9,53).375 (9,53).375 (9,53).375 (9,53).437 (,0).375 (9,53).38 (9,8).374 (9,50).375 (9,53) (9,53).375 (9,53).500 (,70).375 (9,53).380 (9,5).370 (9,40).375 (9,53).375 (9,53).375 (9,53).375 (9,53).375 (9,53).377 (9,58).375 (9,53).385 (9,78).370 (9,40) (9,5).375 (9,53).38 (9,8).375 (9,53).375 (9,53).385 (9,78).375 (9,53) / (,59) 5/4 (,98) 3/4 (,9).050 (,7) /4 (0,4).03 (,0) 7/4 (,77) / (,59) / (,59) /3 (0,79) / (,59).00 (0,5).07 (,70).03 (0,8).00 (,5) / (,59) 5/4 (,98) / (,59) 3/4 (,9) /3 (0,79) 3/4 (,9) 5/4 (,98) /3 (0,79) /3 (0,79) / (,59) / (,59) / (,59) / (,59) / (,59) /3 (0,79).040 (,0).0 (,5).030 (0,7) / (,59).040 (,0).05 (,5).0 (,79).0 (,57).040 (,0).035 (0,7).03 (0,79).057 (,45).050 (,7).0 (,57).030 (0,7) 5/4 (,98).035 (0,89) 7/3 (5,55) / (,59) 3/3 (,38) / (,59) / (,59) 3/3 (,38).09 (5,30).4 (3,70).48 (,30).0 (.,0).300 (7,).35 (5,97).89 (4,80).0 (5,33).05 (5,).95 (4,95).50 (,35).35 (8,00).4 (,5).05 (5,).300 (7,).80 (7,).94 (4,9).50 (,35).45 (,).0 (,0).95 (4,95).44 (,0).85 (4,70).50 (,35).8 (5,54).4 (,5).33 (7,95).85 (4,70).308 (7,8).4 (,4).50 (,35).45 (,).45 (,).308 (7,8).50 (,35).54 (,45).307 (7,80).87 (4,75).50 (,35) 57 (,53).43 (,7).304 (7,7).45 (,).87 (4,75).50 (,35).45 (3,8).4 (,5).99 (5,05).85 (4,70).50 (,35).50 (,35).40 (,0).50 (,35).7 (4,34).5 (,9).40 (3,5).33 (3,38). (,84).75 (4,45).4 (3,58).70 (4,3).73 (4,39).7 (4,34).7 (4,34).3 (5,99).95 (4,95).73 (4,39).7 (5,77).0 (5,0). (,94).7 (4,34).9 (4,88).0 (5,59).3 (3,45).50 (3,8).40 (3,5).9 (4,9).40 (3,5).7 (4,4).88 (4,78).40 (3,5).9 (4,98).4 (3,58).7 (4,34).40 (3,5).45 (3,8).9 (4,98).7 (4,34).9 (4,98).55 (,48).47 (3,73).7 (4,34).93 (4,90).99 (5,05).00 (5,08).55 (3,94).093 (,3).9 (4,9).5 (,9).85 (4,70).40 (3,5).40 (3,5).40 (3,5).97 (5,00).45 (3,8).38 (3,5) IV NYLON SHOULDE WASHES AE SUIT- ABLE FO A LAGE VAIETY OF INSULA- TION AND CHANICAL APPLICATIONS. THEY SEAL EDUCE VIBATION ACT AS SPACES AND GUIDES STONG AND COOSION ESISTANT mpsales@microplastics.com micro plastics, inc. WEBSITE: 59

60 TABLE F OF CONTENTS FINDEX A-Z WASHES, SHOULDE WASHES AND SCEW INSULATOS IV NYLON SHOULDE WASHES AE SUIT- ABLE FO A LAGE VAIETY OF INSULA- TION AND CHANICAL APPLICATIONS. THEY SEAL EDUCE VIBATION ACT AS SPACES AND GUIDES STONG AND COOSION ESISTANT NYLON SHOULDE WASHES ITEM NUMBE DESCIPTION L A B C D SWS085 SWS 85 3/3 (,38).375 (9,53) / (,59).48 (,30).3 (3,45) SWS0854 SWS 854 3/4 (,9).375 (9,53) / (,59).40 (,0).94 (4,93) SWS0855 SWS 855 7/4 (,77).375 (9,53) / (,59).40 (,0).38 (3,5) SWS085 SWS 85 3/3 (,38).375 (9,53) /4 (0,4).85 (4,70).40 (3,5) SWS0857 SWS 857 5/3 (3,97).375 (9,53) 5/4 (,98).93 (4,90). (,95) SWS0858 SWS 858 / (,59).375 (9,53) / (,59).50 (,35).45 (3,8) SWS0859 SWS 859 9/4 (3,58).375 (9,53) /3 (0,79).45 (,).87 (4,75) SWS080 SWS 80 3/4 (5,).380 (9,5) / (,59).0 (5,59).48 (3,7) SWS08 SWS 8 /8 (3,8).378 (9,0) /3 (0,79).55 (,48). (,94) SWS08 SWS 8 3/ (4,7).390 (9,9) 5/4 (,98).87 (7,9).9 (4,98) SWS083 SWS 83 5/4 (,98).390 (9,9) 5/4 (,98).33 (7,95).03 (5,) SWS084 SWS 84 7/4 (,77).395 (0,03) 5/4 (,98).99 (7,59).30 (5,84) SWS085 SWS (,44).380 (9,5).05 (,5).54 (,45).9 (4,98) SWS087 SWS (,7).375 (9,53).040 (,0).4 (5,44).4 (3,58) SWS088 SWS (0,79).375 (9,53).0 (,57).3 (7,9).53 (,43) SWS089 SWS (5,).390 (9,9).0 (,57).348 (8,84).3 (7,9) SWS0870 SWS 870 /8 (3,8).433 (0,99) / (,59).3 (7,9).99 (5,05) SWS087 SWS (3,30).390 (9,9).0 (,57).0 (,0).00 (5,08) SWS087 SWS 87.0 (4,0) 7/4(0,7).050 (,7) 9/3 (7,5).00 (5,08) SWS0873 SWS 873. (3,0).394 (0,0).039 (0,99). (,50). (5,) SWS0874 SWS (3,53).390 (9,9).05 (0,3).303 (7,70).3 (5,) SWS0875 SWS (7,).375 (9,53).050 (,7).53 (,43).5 (3,8) SWS087 SWS (,9).390 (9,9).0 (,57).0 (,0).00 (5,08) SWS0880 SWS 880 /8 (3,8).400 (0,) /8 (3,8).75 (,99).40 (3,5) SWS088 SWS 88 9/3 (7,4).470 (,93) 5/4 (,98).3 (7,9).40 (3,5) SWS0885 SWS (,54).400 (0,) /8 (3,8).75 (,99).40 (3,5) SWS0887 SWS (4,75).408 (0,3).0 (,57).40 (,0).97 (5,00) SWS0888 SWS 888 3/4 (,9).400 (0,) 3/4 (,9).43 (,7).5 (3,9) SWS0890 SWS 890 3/4 (,9).45 (0,54) 5/3 (3,97).43 (,7).4 (3,58) SWS089 SWS (,47).445 (,30).077 (,9).343 (8,7).308 (7,8) SWS0894 SWS 894 / (,59).48 (0,) 7/4 (,77).43 (,7).4 (3,58) SWS089 SWS 89 3/ (4,7).408 (0,3) / (,59).40 (,0).0 (5,59) SWS0897 SWS (8,00).433 (,00).079 (,0).30 (7,87).0 (5,3) SWS0900 SWS 900 /3 (0,79).48 (0,87) / (,59).45 (,).5 (3,9) SWS090 SWS (,3).437 (,0).040 (,0).375 (9,53).94 (4,93) SWS090 SWS 90 /3 (0,79).437 (,0) / (,59).45 (,).5 (3,9) SWS0903 SWS (,9).43 (0,97).05 (,5). (,50).9 (4,98) SWS0904 SWS 904 (9,53).437 (,0) / (,59).8 (7,).5 (5,7) SWS0905 SWS 905 / (,59).45 (0,78) / (,59).30 (7,87).50 (,35) SWS090 SWS (0,89).5 (5,87).050 (,7).47 (0,84).70 (4,3) SWS0907 SWS (0,).438 (,3).094 (,39).307 (7,80).53 (,43) SWS0908 SWS 908 3/3 (,38).438 (,3) /3 (0,79).7 (,78).03 (5,) SWS0909 SWS 909 3/3 (0,3).493 (,5) 3/3 (,38).37 (9,55).7 (4,47) SWS090 SWS (,78).443 (,5).048 (,).85 (7,4).9 (4,85) SWS09 SWS 9 9/4 (3,58).43 (0,97) /3 (0,79).303 (7,70).9 (4,98) SWS094 SWS (,09). (,8).094 (,39).3 (7,9).93 (4,90) SWS095 SWS (3,5).43 (0,49).35 (8,00).44 (,0).7 (5,5) 0 TELEPHONE: (870) / 453- micro plastics, inc. FAX: (870)

61 TABLE F OF CONTENTS FINDEX A-Z WASHES, SHOULDE WASHES AND SCEW INSULATOS IV NYLON SHOULDE WASHES ITEM NUMBE DESCIPTION L A B C D SWS09 SWS 9 3/ (4,7).743 (8,87) / (,59).437 (,0).37 (9,55) SWS097 SWS 97 3/4 (,9).48 (0,87) /8 (3,8).350 (8,89).308 (7,8) SWS098 SWS 98 3/4 (,9).450 (,43) /4 (0,4).30 (7,87).30 (5,84) SWS099 SWS (,5).40 (,8).030 (0,7).370 (9,40).0 (,0) SWS090 SWS (3,5).43 (8,87).8 (3,00).44 (,0).7 (5,5) SWS09 SWS 9.3 (5,99).480 (,9).079 (,0).35 (8,00).40 (,0) SWS095 SWS 95 3/4 (,9).48 (,89) / (,59).48 (,30).40 (3,5) SWS09 SWS 9 / (7,53).498 (,4) / (,59).375 (9,53).54 (,45) SWS0930 SWS 930 7/3 (5,55).48 (,89) 3/4 (,9).375 (9,53).35 (8,) SWS0935 SWS (4,75).495 (,57).05 (,5).3 (7,9).00 (5,08) SWS0940 SWS (3,99).483 (,7).059 (,50).35 (8,00).40 (,0) SWS0950 SWS (3,99).47 (,99).8 (4,0).35 (8,00).05 (5,) SWS00 SWS 00 (9,53).399 (0,3) / (,59).0 (,0).00 (5,08) SWS00 SWS 00 3/3 (,38).438 (,3) / (,59).7 (,78).03 (5,) SWS003 SWS 003 3/ (4,7).745 (8,9) /3 (0,79).8 (7,).34 (5,94) SWS004 SWS 004 9/4 (3,58).438 (,3) /3 (0,79).50 (,35).35 (3,43) SWS005 SWS 005 5/4 (,98).44 (,79) /4 (0,4).3 (7,9).55 (,48) SWS00 SWS 00 /4 (4,37).45 (0,80) / (,59).377 (9,58).0 (,0) SWS007 SWS 007 3/4 (,9).437 (,0) 3/4 (,9).8 (7,4).0 (5,) SWS008 SWS 008 3/4 (,9).0 (5,75) 3/4 (,9).3 (7,9).05 (5,) SWS009 SWS 009 / (,59).740 (8,80) /3 (0,79).38 (9,53).30 (8,3) SWS00 SWS 00 3/4 (,9).5 (5,88) 7/4 (,77).375 (9,53).50 (,35) SWS0 SWS 0 / (,59).75 (7,4) 3/3 (,38).480 (,9).57 (,53) SWS0 SWS 0 /8 (3,8).97 (7,70) / (,59).359 (9,). (,7) SWS03 SWS 03 3/4 (,9).88 (7,48) /3 (0,79).543 (3,79).508 (,90) SWS04 SWS 04 /3 (0,79).437 (,0) /3 (0,79).30 (7,87).53 (,43) SWS05 SWS 05 3/4 (,9).500 (,70) 3/3 (,38).75 (,99).45 ( 3,8) SWS0 SWS 0 7/ (,).500 (,70) /8 (3,8).50 (,35).7 (4,4) SWS07 SWS 07 / (,59).5 (4,7) 3/3 (,38).375 (9,53).0 (,0) SWS08 SWS 08 3/ (4,7).5 (5,88) / (,59).3 (8,8).55 (,48) SWS09 SWS 09 3/4 (,9).5 (5,) /3 (0,79).30 (7,87).53 (,43) SWS00 SWS 00 / (,59).40 (,) / (,59).380 (9,5).95 (4,95) SWS0 SWS 0 3/4 (,9).30 (,00) /3 (0,79).48 (,30).7 (4,34) SWS0 SWS 0 3/4 (,9).5 (5,88) / (,59).375 (9,53).90 (4,83) SWS03 SWS 03 3/4 (,9).555 (4,0) 5/4 (,98).300 (7,).0 (,0) SWS05 SWS 05 7/ (,).5 (4,7) / (,59).375 (9,53).55 (,48) SWS0 SWS 0 /3 (0,79).588 (4,93) /3 (0,79).53 (,43).98 (5,0) SWS07 SWS 07 (,70).500 (,70) / (,59) 35 (9,7).3 (7,9) SWS08 SWS (,3).500 (,70).0 (,57).50 (,35).89 (4,80) SWS09 SWS (4,0).500 (,70).0 (3,05).300 (7,).9 (4,98) SWS030 SWS 030 3/3 (,38).490 (,45) / (,59).8 (7,4).00 (5,08) SWS03 SWS (,7).500 (,70).0 (,57).48 (,30).94 (4,93) SWS SWS /3 (0,79).500 (,70) 3/3 (,38).50 (,35).5 (3,9) SWS033 SWS 033 5/ (7,94).500 (,70) / (,59).3 (7,9).00 (5,08) SWS034 SWS 034 /3 (0,79).500 (,70) /3 (0,79).3 (7,9).5 (,40) SWS035 SWS 035 /3 (0,79).500 (,70) / (,59).30 (5,84).47 (3,73) SWS03 SWS 03 /4 (0,4).500 (,70) 5/4 (,98).50 (,35).5 (4,9) NYLON SHOULDE WASHES AE SUIT- ABLE FO A LAGE VAIETY OF INSULA- TION AND CHANICAL APPLICATIONS. THEY SEAL EDUCE VIBATION ACT AS SPACES AND GUIDES STONG AND COOSION ESISTANT mpsales@microplastics.com micro plastics, inc. WEBSITE:

62 TABLE F OF CONTENTS FINDEX A-Z WASHES, SHOULDE WASHES AND SCEW INSULATOS IV NYLON SHOULDE WASHES AE SUIT- ABLE FO A LAGE VAIETY OF INSULA- TION AND CHANICAL APPLICATIONS. THEY SEAL EDUCE VIBATION ACT AS SPACES AND GUIDES STONG AND COOSION ESISTANT NYLON SHOULDE WASHES ITEM NUMBE DESCIPTION L A B C D SWS037 SWS (,9).500 (,70).5 (3,7).8 (7,4).9 (5,5) SWS038 SWS (5,40).875 (,3).0 (,57).500 (,70).390 (9,9) SWS040 SWS 040 3/3 (,38).505 (,83) / (, (8,7).57 (,53) SWS04 SWS (8,5).495 (,57).050 (,7).34 (8,79).0 (,0) SWS04 SWS (0,9).500 (,70).03 (0,79).48 (,30).99 (5,05) SWS045 SWS 045 3/ (4,7).498 (,5) (,35).30 (7,87).95 (4,95) SWS048 SWS 048 7/ (,).500 (,70) / (,59).375 (9,53).50 (,35) SWS050 SWS 050 5/3 (3,97).490 (,45) / (,59).50 (,35).90 (4,83) SWS05 SWS 05 3/4 (,9).44 (,0) / (,59).48 (,30).94 (4,9) SWS05 SWS 05 5/3 (3,97).488 (,39) /8 (3,8).50 (,35).90 (4,83) SWS053 SWS (4,3).500 (,70).5 (3,7).375 (9,5).57 (,53) SWS054 SWS 054 9/4 (3,58).500 (,70) / (,59).345 (8,7).85 (7,34) SWS055 SWS 055 /3 (0,79).495 (,57) /3 (0,79).3 (7,9).0 (,0) SWS057 SWS 057 3/3 (,38).500 (,70) / (,59).3 (7,9).0 (,0) SWS058 SWS 058 /3 (0,79).490 (,45) /3 (0,79).30 (7,87).93 (4,90) SWS059 SWS (,5).500 (,70).030 (0,7).35 (9,7).0 (,0) SWS00 SWS 00 5/4 (,98).49 (,50) /3 (0,79).38 (8,08).5 (,73) SWS0 SWS 0 5/3 (3,97).488 (,39) /8 (3,8).50 (,35).5 (5,4) SWS05 SWS 05 3/ (4,7).53 (3,03) / (,59).3 (7,9).75 (4,45) SWS070 SWS 070 5/4 (,98).495 (,57) /3 (0,79.38 (8,08).93 (4,90) SWS07 SWS (,43).50 (,75).87 (4,75).374 (9,50).38 (8,08) SWS075 SWS 075 (,35).53 (3,03) / (,59).370 (9,40).0 (,0) SWS080 SWS 080 /4 (0,4).500 (,70) /3 (0,79).38 (8,08).4 (3,58) SWS08 SWS 08 3/4 (,9).500 (,70) /3 (0,79).38 (8,08).93 (4,90) SWS084 SWS 084 3/4 (,9).500 (,70) /3 (0,79).38 (8,08).4 (3,58) SWS08 SWS 08 / (,59).500 (,70) / (,59).330 (8,38).50 (3,8) SWS088 SWS (,77).500 (,70) / (,59).40 (,0).38 (3,5) SWS090 SWS 090 3/4 (,9).58 (3,) /3 (0,79).305 (7,75).080 (,03) SWS09 SWS (,9).500 (,70).75 (4,45).300 (7,).95 (4,95) SWS095 SWS 095 /8 (3,8).50 (,75) /3 (0,79).399 (0,3).349 (8,8) SWS098 SWS 098 9/4 (3,58).55 (3,08) / (,59).3 (7,93).0 (,0) SWS0 SWS 0 3/3 (,38).500 (,70) /3 (0,79).8 (7,).34 (5,94) SWS5 SWS (,70).55 (5,88).03 (,0).370 (9,40).7 (,78) SWS45 SWS (0,7).5 (4,8).030 (0,7).400 (0,).38 (8,08) SWS50 SWS 50 3/4 (,9).5 (4,8) 3/4 (,9).300 (7,).0 (,0) SWS5 SWS 5.04 (,4).5 (4,8).04 (,7).300 (7,).0 (,0) SWS5 SWS (,70).55 (3,33).03 (,0).370 (9,40).5 (,73) SWS55 SWS 55 3/4 (,9).5 (4,8).04 (0,.370 (9,40).335 (8,5) SWS59 SWS 59 9/ (4,9).550 (3,97) / (,59).375 (9,53).55 (,48) SWS0 SWS 0 / (,59).5 (4,8) 7/4 (,77).35 (9,7).5 (5,4) SWS SWS 7/4 (0,7).50 (4,) / (,59).375 (9,53).55 (,48) SWS3 SWS 3 5/3 (,9).550 (3,97) / (,59).380 (9,5).47 (,7) SWS4 SWS 4 /3 (0,79).5 (4,8) /8 (3,8).3 (7,93).9 (4,9) TELEPHONE: (870) / 453- micro plastics, inc. FAX: (870)

63 TABLE F OF CONTENTS FINDEX A-Z WASHES, SHOULDE WASHES AND SCEW INSULATOS IV NYLON SHOULDE WASHES ITEM NUMBE DESCIPTION L A B C D SWS5 SWS 5 (,35).55 (3,99) / (,59).380 (9,5).48 (,30) SWS70 SWS 70 (9,53).570 (4,48) / (,59).470 (,94).385 (9,78) SWS75 SWS (9,89).570 (4,48).039 (0,99).49 (,47).43 (0,49) SWS7 SWS (8,5).545 (3,84).075 (,9).3 (8,03). (4,) SWS80 SWS 80 3/4 (,9).578 (4,8) / (,59).85 (4,70).40 (3,5) SWS00 SWS 00 3/4 (,9).5 (5,) 3/4 (,9).35 (8,00).08 (5,8) SWS0 SWS 0 /8 (3,8).0 (5,75) (9,53).30 (9,4).30 (8,3) SWS04 SWS (,70).00 (5,4).05 (0,4).485 (,3).34 (8,3) SWS05 SWS 05 /3 (0,79).0 (5,75) 3/4 (,9).434 (,0).383 (9,73) SWS0 SWS 0 /3 (0,79).5 (5,88) / (,59).405 (0,9).378 (9,0) SWS SWS.39 (3,53).5 (5,88).0 (,8).405 (0,9).30 (8,3) SWS SWS.05 (0,4).5 (5,88).0 (,57).375 (9,53).00 (5,08) SWS5 SWS 5.0 (,57).5 (5,88) /3 (0,79).30 (7,87).95 (4,95) SWS7 SWS (0,7).5 (5,88).030 (0,7).447 (,).378 (9,0) SWS9 SWS 9 3/4 (,9).5 (5,88) / (,59).30 (7,87).7 (4,37) SWS0 SWS 0 (9,05).0 (5,75) /8 (3,8).400 (0,0).0 (,0) SWS SWS /8 (3,8).30 (,00) / (,59).37 (8,3).0 (,0) SWS SWS /3 (0,79).5 (5,88) /3 (0,79).448 (,37).378 (9,0) SWS5 SWS 5.07 (0,9).5 (5,88).0 (,57).48 (,30).0 (3,05) SWS7 SWS 7.0 (5,33).5 (5,88).058 (,47).379 (9,3).3 (,8) SWS8 SWS 8.05 (0,4).5 (5,88).00 (,5).9 (5,5).40 (3,5) SWS30 SWS 30 3/4 (,9).550 (3,97) 5/4 (,98).305 (7.75).0 (,0) SWS3 SWS 3 (,70).0 (5,75) / (,59).370 (9.40).3 (8,03) SWS33 SWS (,9).5 (5,88).0 (,57).3 (7,90).53 (,43) SWS35 SWS (3,8).0 (5,75).00 (,5).50 (,75).3 (8,03) SWS40 SWS 40 3/ (4,7).30 (,00) / (,59).375 (9,53).54 (,45) SWS4 SWS 4.75 (4,45).50 (,5).5 (3,8).490 (,45).385 (9,78) SWS499 SWS 499 (9,53).53 (3,03) / (,59).3 (7,93).9 (4,85) SWS50 SWS 50 (9,53).53 (3,03) / (,59).3 (7,93). (,3) SWS50 SWS 50 /8 (3,8).47 (,8) 3/4 (,9).3 (7,93).55 (,48) SWS503 SWS 503 /3 (0,79).5 (5,88) / (,59).375 (9,53).95 (7,49) SWS504 SWS 504 /8 (3,8).87 (7,45) /8 (3,8).437 (,0).38 (8,33) SWS505 SWS 505 /3 (0,79).500 (,70) / (,59).3 (7,93).5 (,40) SWS50 SWS 50 5/ (7,94).5 (5,88) / (,59).500 (,70).380 (9,5) SWS507 SWS 507 /8 (3,8).00 (5,4) /8 (3,8).370 (7,93).50 (,35) SWS508 SWS 508 3/ (4,7).74 (7,) 3/3 (,38).500 (,70).90 (7,3) SWS509 SWS 509-7/4 (8,7).35 (,3) 9/4 (3,58).45 (0,80).0 (5,) SWS50 SWS 50 (9,53).87 (7,45) (9,53).359 (9,).3 (,8) SWS5 SWS 5 5/ (7,94).5 (5,88) / (,59).500 (,70).395 (0,03) SWS5 SWS (8,48).87 (7,45).04 (,7).348 (8,84).3 (,8) SWS53 SWS 53 /8 (3,8).703 (7,8) / (,59).437 (,0).335 (8,5) SWS55 SWS (0,7).70 (8,03).075 (,90).470 (,94).40 (0,7) SWS55 SWS.80 (7,).70 (7,80).0 (,57).305 (7,75).58 (,55) NYLON SHOULDE WASHES AE SUIT- ABLE FO A LAGE VAIETY OF INSULA- TION AND CHANICAL APPLICATIONS. THEY SEAL EDUCE VIBATION ACT AS SPACES AND GUIDES STONG AND COOSION ESISTANT mpsales@microplastics.com micro plastics, inc. WEBSITE: 3

64 TABLE F OF CONTENTS FINDEX A-Z WASHES, SHOULDE WASHES AND SCEW INSULATOS IV NYLON SHOULDE WASHES AE SUIT- ABLE FO A LAGE VAIETY OF INSULA- TION AND CHANICAL APPLICATIONS. THEY SEAL EDUCE VIBATION ACT AS SPACES AND GUIDES STONG AND COOSION ESISTANT NYLON SHOULDE WASHES ITEM NUMBE DESCIPTION L A B C D SWS57 SWS50 SWS5 SWS55 SWS58 SWS53 SWS53 SWS533 SWS534 SWS539 SWS540 SWS54 SWS54 SWS543 SWS544 SWS545 SWS54 SWS547 SWS548 SWS550 SWS55 SWS55 SWS553 SWS554 SWS555 SWS55 SWS557 SWS558 SWS0 SWS SWS SWS3 SWS4 SWS SWS8 SWS570 SWS57 SWS575 SWS57 SWS578 SWS580 SWS585 SWS58 SWS590 SWS300 SWS300 SWS3003 SWS 57 SWS 50 SWS 5 SWS 55 SWS 58 SWS 53 SWS 53 SWS 533 SWS 534 SWS 539 SWS 540 SWS 54 SWS 54 SWS 543 SWS 544 SWS 545 SWS 54 SWS 547 SWS 548 SWS 550 SWS 55 SWS 55 SWS 553 SWS 554 SWS 555 SWS 55 SWS 557 SWS 558 SWS 0 SWS SWS SWS 3 SWS 4 SWS SWS 8 SWS 570 SWS 57 SWS 575 SWS 57 SWS 578 SWS 580 SWS 585 SWS 58 SWS 590 SWS 300 SWS 300 SWS (,79) 5/3 (3,97) 5/3 (3,97) /3 (3,43) 3/ (4,7) 5/ (7,94).55 (3,94).375 (9,5).87 (4,75) /3 (8,73) /8 (3,8) 5/4 (,98) 3/4 (,9).77 (9,5).00 (5,40).00 (,54).5 (3,8).50 (,35).45 (0,80) / (,59) 3/4 (,9) 7/4 (,77) 5/ (7,94) 3/4 (,9).098 (,49) 3/ (4,7) 3/4 (0,00) /8 (3,8) 3/4 (,9) 7/4 (0,7) (3,38) 3/3 (,9) (,35) 5/3 (,90) 3/4 (,9) / (7,4).30 (8,3) 5/4 (0,4) /3 (0,7) 3/ (4,7) 5/ (7,94) (,35) (,35).08 (0,4) /8 (3,8) 3/4 (,9) 7/3 (5,55).70 (8,03).75 (8,4).70 (8,9).730 (8,54).743 (8,87).743 (8,87).745 (8,9) (9,05).745 (8,9).740 (8,80).740 (8,80).750 (9,05).750 (9,05).75 (9,05).75 (9,05).750 (9,05).750 (9,05).750 (9,05).750 (9,05).734 (8,4).753 (9,).743 (8,87).750 (9,05).735 (8,7).747 (8,87).750 (9,05).748 (8,99).750 (9,05).750 (9,05).750 (9,05).755 (9,7).750 (9,05).750 (9,05).740 (8,80).750 (9,05).740 (8,80).750 (9,05).750 (9,0).750 (9,05).750 (9,0).745 (8,9).740 (8,80).750 (9,05).745 (8,9).93 (7,0).750 (9,05).750 (9,05).90 (4,83) 5/3 (3,97) / (,59) (,35) / (,59) 5/4 (,98).00 (,54).375 (9,5).03 (0,79) 3/3 (,38) 3/3 (,38) 3/3 (,38) 3/ (4,7).095 (,4).095 (,4).08 (,8).87 (4,75).0 (,57) / (,59) /8 (3,8) 5/4 (,98) 3/3 (,38) 5/4 (,98) 3/ (4,7).079 (,0) / (,59) /8 (3,8) / (,59) /3 (0,79) /4 (4,37) 5/4 (,98) /8 (3,8) / (,59) 5/3 (3,97) /3 (0,79) 9/4 (3,58).030 (0,7) 3/3 (,38) /3 (0,79) / (,59) /3 (0,79) (,70) /8 (3,8).085 (,) / (,59) 3/4 (,9) 3/3 (,38).338 (8,59).445 (,30).485 (,3).375 (9,53).443 (,5).50 (,75).545 (3,84).594 (5,09).8 (7,).375 (9,53).37 (9,4).380 (9,5).500 (,70).490 (,45).375 (9,53).500 (,70).500 (,70).7 (5,7).590 (4,99).488 (,40).409 (0,38).500 (,70).500 (,70).490 (,45).48 (,4).500 (,70).504 (,80).500 (,70).37 (9,4).434 (,0).505 (,83).375 (9,53).50 (,35).375 (9,53).34 (8,).385 (9,78).580 (4,73).35 (8,0).500 (,70).5 (5,88).50 (4,).05 (5,37).500 (,70).305 (7,75).437 (,0).375 (9,53).380 (9,5).55 (,48).375 (9,53).70 (,8).57 (,5).375 (9,53).383 (9,7).39 (9,93).380 (9,5).34 (5,94). (,7). (,7). (,7).430 (0,9).9 (4,83).5 (,73).50 (,35).344 (8,74).509 (,93).375 (9,53).50 (,35).58 (,55).375 (9,53).370 (9,39).435 (,05).358 (9,09).375 (9,53).384 (9,75).375 (9,53).53 (,43).3 (7,93).378 (9,0).5 (,73).50 (3,8).50 (,35).53 (,43).0 (,0).57 (3,3).90 (4,83).9 (5,5).50 (,95).500 (,70).380 (9,5).8 (7,4).00 (5,08).38 (8,33).33 (8,0). (,7) 4 TELEPHONE: (870) / 453- micro plastics, inc. FAX: (870)

65 TABLE F OF CONTENTS FINDEX A-Z WASHES, SHOULDE WASHES AND SCEW INSULATOS IV NYLON SHOULDE WASHES ITEM NUMBE DESCIPTION L A B C D SWS3004 SWS 3004 / (,59).750 (9,05) 3/3 (,38).359 (9,).5 (3,8) SWS3005 SWS /3 (3,97).750 (9,05) /3 (0,79).498 (,4).378 (9,0) SWS300 SWS 300 /3 (0,79).750 (9,05) /8 (3,8).500 (,70).375 (9,53) SWS3007 SWS 3007 / (,59).750 (9,05) /8 (3,8).500 (,70).375 (9,53) SWS3008 SWS 3008 / (,59).745 (8,9) /3 (0,79).375 (9,53).30 (8,3) SWS3009 SWS /4 (,9).70 (9,30) 5/4 (,98).40 (0,4).58 (,55) SWS300 SWS (0,8).745 (8,9).03 (0,79).30 (7,87).57 (,53) SWS30 SWS (0,03).740 (8,80).0 (,57).430 (0,9).3 (8,8 SWS305 SWS (5,53).75 (9,0).00 (,5).505 (,83).30 (8,3) SWS30 SWS (,7).745 (8,8) / (,59).55 (4,).55 (3,08) SWS307 SWS 307 5/3 (3,97).755 (9,8) (,70).50 (,95).385 (9,78) SWS300 SWS (7,75).740 (8,80).30 (3,30).495 (,57).9 (5,5) SWS30 SWS 30. (,8).745 (8,9) / (,59).495 (,57).390 (9,9) SWS30 SWS (4,78).750 (9,05).09 (,34).7 (5,93).50 (,85) SWS3030 SWS (,40).780 (9,8).079 (,0).39 (9,9).50 (,35) SWS300 SWS (8,).85 (0,9).00 (,5).435 (,05).30 (7,87) SWS30 SWS 30 /3 (0,79).750 (9,05) / (,59).375 (9,53).0 (,0) SWS30 SWS 30 (,70).85 (0,9) / (,59).0 (5,75).50 (3,) SWS303 SWS 303 (,70).87 (,4) /8 (3,8).7 (5,7).335 (8,5) SWS350 SWS 350 (5,40).875 (,3) / (,59).500 (,70).375 (9,53) SWS35 SWS 35 (9,53) 7/8 (,) /8 (3,7).33 (,08).50 (,95) SWS355 SWS 355 (9,53).875 (,3) /8 (3,8).30 (,00). (,8) SWS30 SWS 30 (,70).875 (,3) / (,59).750 (9,05).35 (,3) SWS35 SWS 35 (9,53).875 (,3) /8 (3,8).0 (5,75).50 (,35) SWS300 SWS 300 3/ (4,7).995 (5,7) /8 (3,8).79 (0,).95 (7,5) SWS305 SWS 305 (5,88).995 (5,7) /8 (3,8).787 (9,99).95 (7,5) SWS30 SWS 30 (5,40).995 (5,7) /8 (3,8).788 (0,0).95 (7,5) SWS3500 SWS / (4,7).750 (9,05) / (,59).498 (,4).378 (9,0) SWS350 SWS 350 7/4 (,77).750 (9,05) 3/3 (,38).577 (4,).390 (9,9) SWS350 SWS 350 7/4 (0,7).790 (0,07) 3/4 (,9).5 (5,88).550 (3,97) SWS3503 SWS / (8,).5 (5,88) /8 (3,8).375 (9,53).55 (,47) SWS3504 SWS / (8,).5 (5,88) /8 (3,8).375 (9,53).0 (,0) SWS3507 SWS (,35).830 (,08).00 (,54).45 (,8).53 (,43) SWS350 SWS 350 3/3 (0,3).85 (0,9) 3/3 (,38).445 (,30).30 (7,77) SWS35 SWS 35 3/4 (5,).880 (,35) 3/4 (,9).750 (9,05).7 (5,7) SWS35 SWS (3,75).87 (,5).0 (,79).497 (,).385 (9,78) SWS353 SWS (,35).875 (,).5 (3,7).7 (5,7).335 (8,5) SWS350 SWS 350 7/3 (3,49).945 (4,03) 5/4 (,98).470 (,93).40 (0,3) SWS35 SWS 35 (,35).980 (4,89) /8 (3,8).55 (4,).380 (9,5) SWS3580 SWS / (4,9).5 (3,75) 3/4 (,9).00 (5,40).559 (4,0) SWS300 SWS (,7).00 (5,5).0 (4,0).00 (5,4).0 (,0) SWS30 SWS 30 3/ (4,7).000 (5,40) (,35).435 (,05).35 (8,) SWS30 SWS 30 /3 (0,79).000 (5,40) 3/3 (,38). (5,5).55 (3,08) SWS303 SWS (,7).005 (5,53).070 (,78).500 (,70).453 (,5) SWS304 SWS (,7).00 (5,55).078 (,98).504 (,80).37 (9,55) SWS305 SWS 305 5/ (7,94).005 (5,53) / (,59).500 (,70).375 (9,53) SWS30 SWS (8,38).00 (5,40).04 (,0).5 (5,87).55 (3.08) NYLON SHOULDE WASHES AE SUIT- ABLE FO A LAGE VAIETY OF INSULA- TION AND CHANICAL APPLICATIONS. THEY SEAL EDUCE VIBATION ACT AS SPACES AND GUIDES STONG AND COOSION ESISTANT mpsales@microplastics.com micro plastics, inc. WEBSITE: 5

66 TABLE F OF CONTENTS FINDEX A-Z WASHES, SHOULDE WASHES AND SCEW INSULATOS IV NYLON SHOULDE WASHES AE SUIT- ABLE FO A LAGE VAIETY OF INSULA- TION AND CHANICAL APPLICATIONS. THEY SEAL EDUCE VIBATION ACT AS SPACES AND GUIDES STONG AND COOSION ESISTANT NYLON SHOULDE WASHES ITEM NUMBE DESCIPTION L A B C D SWS307 SWS (3,3).08 (7,3).0 (,57).89 (,7).30 (,00) SWS308 SWS (,70).000 (5,40).5 (3,8).87 (7,45).50 (,95) SWS309 SWS (3,05).000 (5,40).30 (3,30).745 (8,9).45 (,38) SWS30 SWS 30 9/ (4,9).000 (5,40) / (,59).500 (,70).38 (9,70) SWS35 SWS 35 (9,05).000 (5,40) /8 (3,8).500 (,70).375 (9,53) SWS350 SWS 350 7/4 (,77).000 (5,40) 5/4 (,98).770 (9,5).508 (,90) SWS380 SWS 380 / (,59).000 (5,40) / (,59).98 (7,57).03 (5,) SWS385 SWS 385 / (,59).04 (7,0) / (,59).787 (9,99). (5,54) SWS38 SWS 38.8 (7,4).05 (8,07).09 (,34).78 (8,4).55 (3,08) SWS390 SWS 390 7/ (,).5 (8,58) 3/3 (,38).700 (7,78).50 (,95) SWS39 SWS (,5).0 (9,4).8 (3,5).495 (,57).377 (9,58) SWS400 SWS 400 3/3 (,38).5 (8,58) / (,59).740 (8,80).55 (3,08) SWS400 SWS 400 3/3 (,38).30 (3,4) / (,59).980 (4,89).50 (,95) SWS4003 SWS /3 (7,4).05 (8,07) /8 (3,8).75 (9,0).55 (3,08) SWS4004 SWS 4004 (,70).45 (3,9) /8 (3,8).875 (,3).7 (5,9) SWS4005 SWS /3 (0,3).5 (3,80) / (,59).00 (5,4).538 (3,) SWS400 SWS 400 3/3 (0,3).5 (3,77) / (,59).58 (3,4).47 (,9) SWS4007 SWS /4 (5,).739 (44,7) 3/4 (5,).095 (7,8).435 (,04) SWS4008 SWS 4008 /3 (8,7).50 (3,75) 5/3 (3,97).995 (5,7).885 (,48) SWS4009 SWS 4009 (9,05) /8 (8,57) / (,59) 7/ (,) 5/ (7,94) SWS400 SWS 400 3/3 (,38).50 (3,75) / (,59).930 (3,).5 (4,7) SWS40 SWS (,39).50 (3,75).0 (,57).989 (5,).5 (4,7) SWS40 SWS (,5).50 (4,9).00 (,5).380 (35,05).5 (8,58) SWS403 SWS 403 (5,88) - (44,45) /8 (3,8) - (34,93).05 (5,78) SWS404 SWS (,04).50 (38,).33 (3,38).48 (3,70).94 (3,9) SWS500 SWS 500 (,70).05 (5,45) /8 (3,8).050 (,7).80 (0,4) SWS5009 SWS /4 (7,03). (53,) /8 (3,8).03 (5,3).70 (,85) NYLON STANDAD SHOULDE WASHES ITEM NUMBE DESCIPTION A B C D L 4SW000 4SW0004 4SW000 4SW0008 4SW000 4SW050 4SW0375 SW SW 4 SW SW 8 SW 0 SW SW.093 (,3). (3,09).4 (3,7).74 (4,4).0 (5,).0 (,0).385 (9,78).50 (,35).8 (7,4).38 (8,33).375 (9,53).437 (,0).5 (4,7).750 (9,05).040 (,0).040 (,0).040 (,0).050 (,7).050 (,7).00 (,5).00 (,5).5 (3,9).87 (4,75).8 (5,54).50 (,35).8 (7,4).375 (9,53).500 (,70).040 (,0).040 (,0).040 (,0).050 (,7).050 (,7).00 (,5).00 (,5) TELEPHONE: (870) / 453- micro plastics, inc. FAX: (870)

67 TABLE F OF CONTENTS SPACES FINDEX A-Z Similar to our standard spacers, but with a specially configured ID designed to grip the screw shank. The spacer remains attached to the screw, for quick, easy assembly. ITEM NUMBE A B D L 3SPT03 (,35).5 (,9).078 (,98) /8 (3,8) 3SPT03 (,35).5 (,9).078 (,98) 3/ (4,7) 3SPT033 (,35).5 (,9).078 (,98) (,35) 3SPT034 (,35).5 (,9).078 (,98) 5/ (7,94) 3SPT035 (,35).5 (,9).078 (,98) (9,53) 3SPT03 (,35).5 (,9).078 (,98) 7/ (,) 3SPT037 (,35).5 (,9).078 (,98) (,70) 3SPT038 (,35).5 (,9).078 (,98) 9/ (4,9) 3SPT039 (,35).5 (,9).078 (,98) (5,88) 3SPT040 (,35).5 (,9).078 (,98) / (7,4) 3SPT04 (,35).5 (,9).078 (,98) (9,05) 3SPT04 (,35).5 (,9).078 (,98) 3/ (0,4) 3SPT043 (,35).5 (,9).078 (,98) 7/8 (,3) 3SPT044 (,35).5 (,9).078 (,98) 5/ (3,8) 3SPT045 (,35).5 (,9).078 (,98) (5,40) 3SPT04 (,35).5 (3,9).0 (,59) /8 (3,8) 3SPT047 (,35).5 (3,9).0 (,59) 3/ (4,7) 3SPT048 (,35).5 (3,9).0 (,59) (,35) 3SPT049 (,35).5 (3,9).0 (,59) 5/ (7,94) 3SPT050 (,35).5 (3,9).0 (,59) (9,53) 3SPT05 (,35).5 (3,9).0 (,59) 7/ (,) 3SPT05 (,35).5 (3,9).0 (,59) (,70) 3SPT053 (,35).5 (3,9).0 (,59) 9/ (4,9) 3SPT054 (,35).5 (3,9).0 (,59) (5,88) 3SPT055 (,35).5 (3,9).0 (,59) / (7,4) 3SPT05 (,35).5 (3,9).0 (,59) (9,05) 3SPT057 (,35).5 (3,9).0 (,59) 3/ (0,4) 3SPT058 (,35).5 (3,9).0 (,59) 7/8 (,3) 3SPT059 (,35).5 (3,9).0 (,59) 5/ (3,8) 3SPT00 (,35).5 (3,9).0 (,59) (5,40) 3SPT0 5/ (7,94).98 (5,03).8 (3,5) /8 (3,8) 3SPT0 5/ (7,94).98 (5,03).8 (3,5) 3/ (4,7) 3SPT03 5/ (7,94).98 (5,03).8 (3,5) (,35) 3SPT04 5/ (7,94).98 (5,03).8 (3,5) 5/ (7,94) 3SPT05 5/ (7,94).98 (5,03).8 (3,5) (9,53) 3SPT0 5/ (7,94).98 (5,03).8 (3,5) 7/ (,) 3SPT07 5/ (7,94).98 (5,03).8 (3,5) (,70) NYLON ETAINING SPACES V ITEM NUMBE A B D L 3SPT08 5/ (7,94).98 (5,03).8 (3,5) 9/ (4,9) 3SPT09 5/ (7,94).98 (5,03).8 (3,5) (5,88) 3SPT070 5/ (7,94).98 (5,03).8 (3,5) / (7,4) 3SPT07 5/ (7,94).98 (5,03).8 (3,5) (9,05) 3SPT07 5/ (7,94).98 (5,03).8 (3,5) 3/ (0,4) 3SPT073 5/ (7,94).98 (5,03).8 (3,5) 7/8 (,3) 3SPT074 5/ (7,94).98 (5,03).8 (3,5) 5/ (3,8) 3SPT075 5/ (7,94).98 (5,03).8 (3,5) (5,40) 3SPT07 (9,53).40 (,0).5 (3,8) /8 (3,8) 3SPT077 (9,53).40 (,0).5 (3,8) 3/ (4,7) 3SPT078 (9,53).40 (,0).5 (3,8) (,35) 3SPT079 (9,53).40 (,0).5 (3,8) 5/ (7,94) 3SPT080 (9,53).40 (,0).5 (3,8) (9,53) 3SPT08 (9,53).40 (,0).5 (3,8) 7/ (,) 3SPT08 (9,53).40 (,0).5 (3,8) (,70) 3SPT083 (9,53).40 (,0).5 (3,8) 9/ (4,9) 3SPT084 (9,53).40 (,0).5 (3,8) (5,88) 3SPT085 (9,53).40 (,0).5 (3,8) / (7,4) 3SPT08 (9,53).40 (,0).5 (3,8) (9,05) 3SPT087 (9,53).40 (,0).5 (3,8) 3/ (0,4) 3SPT088 (9,53).40 (,0).5 (3,8) 7/8 (,3) 3SPT089 (9,53).40 (,0).5 (3,8) 5/ (3,8) 3SPT090 (9,53).40 (,0).5 (3,8) (5,40) 3SPT09 (,70).77 (7,04).77 (4,50) /8 (3,8) 3SPT09 (,70).77 (7,04).77 (4,50) 3/ (4,7) 3SPT093 (,70).77 (7,04).77 (4,50) (,35) 3SPT094 (,70).77 (7,04).77 (4,50) 5/ (7,94) 3SPT095 (,70).77 (7,04).77 (4,50) (9,53) 3SPT09 (,70).77 (7,04).77 (4,50) 7/ (,) 3SPT097 (,70).77 (7,04).77 (4,50) (,70) 3SPT098 (,70).77 (7,04).77 (4,50) 9/ (4,9) 3SPT099 (,70).77 (7,04).77 (4,50) (5,88) 3SPT00 (,70).77 (7,04).77 (4,50) / (7,4) 3SPT0 (,70).77 (7,04).77 (4,50) (9,05) 3SPT0 (,70).77 (7,04).77 (4,50) 3/ (0,4) 3SPT03 (,70).77 (7,04).77 (4,50) 7/8 (,3) 3SPT04 (,70).77 (7,04).77 (4,50) 5/ (3,8) 3SPT05 (,70).77 (7,04).77 (4,50) (5,40) 3SPT0 (,70).375 (9,53).34 (5,94) /8 (3,8) 3SPT07 (,70).375 (9,53).34 (5,94) 3/ (4,7) 3SPT08 (,70).375 (9,53).34 (5,94) (,35) 3SPT09 (,70).375 (9,53).34 (5,94) 5/ (7,94) 3SPT0 (,70).375 (9,53).34 (5,94) (9,53) 3SPT (,70).375 (9,53).34 (5,94) 7/ (,) 3SPT (,70).375 (9,53).34 (5,94) (,70) 3SPT3 (,70).375 (9,53).34 (5,94) 9/ (4,9) 3SPT4 (,70).375 (9,53).34 (5,94) (5,88) 3SPT5 (,70).375 (9,53).34 (5,94) / (7,4) 3SPT (,70).375 (9,53).34 (5,94) (9,05) 3SPT7 (,70).375 (9,53).34 (5,94) 3/ (0,4) 3SPT8 (,70).375 (9,53).34 (5,94) 7/8 (,3) 3SPT9 (,70).375 (9,53).34 (5,94) 5/ (3,8) 3SPT0 (,70).375 (9,53).34 (5,94) (5,40) mpsales@microplastics.com micro plastics, inc. WEBSITE: 7

68 TABLE F OF CONTENTS SPACES FINDEX A-Z V ALL STANDAD NYLON SPACES CAN BE TAPPED TWO THEAD SIZES LAGE THAN THE SCEW SIZE LISTED. FO EXAMPLE: 3SP03 WITH A SCEW SIZE OF CAN BE TAPPED THEAD. STANDAD NYLON SPACES ITEM NUMBE DESCIPTION A B L SCEW 3SP000 SP 0 /8 (3,8).03 (,0) 3/ (4,7) 3SP00 SP 3/ (4,7).09 (,3) /8 (3,8) 3SP00 SP 3/ (4,7).5 (,9) /8 (3,8) 4 3SP003 SP 3 3/ (4,7).09 (,3) 3/ (4,7) 3SP004 SP 4 3/ (4,7).5 (,9) 3/ (4,7) 4 3SP005 SP 5 3/ (4,7).09 (,3) (,35) 3SP00 SP 3/ (4,7).5 (,9) (,35) 4 3SP007 SP 7 3/ (4,7).09 (,3) 5/ (7,94) 3SP008 SP 8 3/ (4,7).5 (,9) 5/ (7,94) 4 3SP009 SP 9 3/ (4,7).09 (,3) (9,53) 3SP00 SP 0 3/ (4,7).5 (,9) (9,53) 4 3SP0 SP 3/ (4,7).09 (,3) 7/(,) 3SP0 SP 3/ (4,7).5 (,9) 7/(,) 4 3SP03 SP 3 3/ (4,7).09 (,3) (,70) 3SP04 SP 4 3/ (4,7).5 (,9) (,70) 4 3SP05 SP 5 3/ (4,7).09 (,3) 9/(4,9) 3SP0 SP 3/ (4,7).5 (,9) 9/(4,9) 4 3SP07 SP 7 3/ (4,7).09 (,3) (5,88) 3SP08 SP 8 3/ (4,7).5 (,9) (5,88) 4 3SP09 SP 9 3/ (4,7).09 (,3) / (7,4) 3SP00 SP 0 3/ (4,7).5 (,9) / (7,4) 4 3SP0 SP 3/ (4,7).09 (,3) (9,05) 3SP0 SP 3/ (4,7).5 (,9) (9,05) 4 3SP03 SP 3 3/ (4,7).09 (,3) 3/(0,4) 3SP04 SP 4 3/ (4,7).5 (,9) 3/(0,4) 4 3SP05 SP 5 3/ (4,7).09 (,3) 7/8(,) 3SP0 SP 3/ (4,7).5 (,9) 7/8(,) 4 3SP07 SP 7 3/ (4,7).09 (,3) 5/(3,8) 3SP08 SP 8 3/ (4,7).5 (,9) 5/(3,8) 4 3SP09 SP 9 3/ (4,7).09 (,3) (5,40) 3SP030 SP 30 3/ (4,7).5 (,9) (5,40) 4 3SP03 SP 3 (,35).09 (,3) /8 (3,8) 3SP03 SP 3 (,35).5 (,9) /8 (3,8) 4 ITEM NUMBE DESCIPTION A B L SCEW 3SP033 3SP034 3SP035 3SP03 3SP037 3SP038 3SP039 3SP040 3SP04 3SP04 3SP043 3SP044 3SP045 3SP04 3SP047 3SP048 3SP049 3SP050 SP 33 SP 34 SP 35 SP 3 SP 37 SP 38 SP 39 SP 40 SP 4 SP 4 SP 43 SP 44 SP 45 SP 4 SP 47 SP 48 SP 49 SP 50 (,35) (,35) (,35) (,35) (,35) (,35) (,35) (,35) (,35) (,35) (,35) (,35) (,35) (,35) (,35) (,35) (,35) (,35).40 (3,5).7 (4,34).09 (,3).5 (,9).40 (3,5).7 (4,34).09 (,3).5 (,9).40 (3,5).7 (4,34).09 (,3).5 (,9).40 (3,5).7 (4,34).09 (,3).5 (,9).40 (3,5).7 (4,34) /8 /8 3/ 3/ 3/ 3/ 5/ 5/ 5/ 5/ (3,8) (3,8) (4,7) (4,7) (4,7) (4,7) (,35) (,35) (,35) (,35) (7,94) (7,94) (7,94) (7,94) (9,53) (9,53) (9,53) (9,53) SP05 3SP05 3SP053 3SP054 3SP055 3SP05 3SP057 3SP058 3SP059 3SP00 3SP0 3SP0 3SP03 3SP04 3SP05 3SP0 SP 5 SP 5 SP 53 SP 54 SP 55 SP 5 SP 57 SP 58 SP 59 SP 0 SP SP SP 3 SP 4 SP 5 SP (,35) (,35) (,35) (,35) (,35) (,35) (,35) (,35) (,35) (,35) (,35) (,35) (,35) (,35) (,35) (,35).09 (,3).5 (,9).40 (3,5).7 (4,34).09 (,3).5 (,9).40 (3,5).7 (4,34).09 (,3).5 (,9).40 (3,5).7 (4,34).09 (,3).5 (,9).40 (3,5).7 (4,34) 7/ (,) 7/ (,) 7/ (,) 7/ (,) (,70) (,70) (,70) (,70) 9/ (4,9) 9/ (4,9) 9/ (4,9) 9/ (4,9) (5,88) (5,88) (5,88) (5,88) SP07 3SP08 3SP09 3SP070 3SP07 3SP07 3SP073 3SP074 3SP075 3SP07 3SP077 3SP078 3SP079 3SP080 3SP08 3SP08 3SP083 3SP084 3SP085 3SP08 3SP087 3SP088 SP 7 SP 8 SP 9 SP 70 SP 7 SP 7 SP 73 SP 74 SP 75 SP 7 SP 77 SP 78 SP 79 SP 80 SP 8 SP 8 SP 83 SP 84 SP 85 SP 8 SP 87 SP 88 (,35) (,35) (,35) (,35) (,35) (,35) (,35) (,35) (,35) (,35) (,35) (,35) (,35) (,35) (,35) (,35) (,35) (,35) (,35) (,35) (,35) (,35).09 (,3).5 (,9).40 (3,5).7 (4,34).09 (,3).5 (,9).40 (3,5).7 (4,34).09 (,3).5 (,9).40 (3,5).7 (4,34).09 (,3).5 (,9).40 (3,5).7 (4,34).09 (,3).5 (,9).40 (3,5).7 (4,34).09 (,3).5 (,9) / (7,4) / (7,4) / (7,4) / (7,4) (9,05) (9,05) (9,05) (9.05) 3/ (0,4) 3/ (0,4) 3/ (0,4) 3/ (0,4) 7/8 (,) 7/8 (,) 7/8 (,) 7/8 (,) 5/ (3,8) 5/ (3,8) 5/ (3,8) 5/ (3,8) (5,40) (5,40) TELEPHONE: (870) 453- / micro plastics, inc. FAX: (870)

69 TABLE F OF CONTENTS SPACES FINDEX A-Z ITEM NUMBE DESCIPTION A B L SCEW 3SP089 SP 89 (,35).40 (3,5) (5,40) 3SP090 SP 90 (,35).7 (4,34) (5,40) 8 3SP09 SP 9 5/ (7,94).5 (,9) /8 (3,8) 4 3SP09 SP 9 5/ (7,94).40 (3,5) /8 (3,8) 3SP093 SP 93 5/ (7,94).7 (4,34) /8 (3,8) 8 3SP094 SP 94 5/ (7,94).94 (4,93) /8 (3,8) 0 3SP095 SP 95 5/ (7,94).5 (,9) 3/ (4,7) 4 3SP09 SP 9 5/ (7,94).40 (3,5) 3/ (4,7) 3SP097 SP 97 5/ (7,94).7 (4,34) 3/ (4,7) 8 3SP098 SP 98 5/ (7,94).94 (4,93) 3/ (4,7) 0 3SP099 SP 99 5/ (7,94).5 (,9) (,35) 4 3SP00 SP00 5/ (7,94).40 (3,5) (,35) 3SP0 SP0 5/ (7,94).7 (4,34) (,35) 8 3SP0 SP0 5/ (7,94).94 (4,93) (,35) 0 3SP03 SP03 5/ (7,94).5 (,9) 5/ (7,94) 4 3SP04 SP04 5/ (7,94).40 (3,5) 5/ (7,94) 3SP05 SP05 5/ (7,94).7 (4,34) 5/ (7,94) 8 3SP0 SP0 5/ (7,94).94 (4,93) 5/ (7,94) 0 3SP07 SP07 5/ (7,94).5 (,9) (9,53) 4 3SP08 SP08 5/ (7,94).40 (3,5) (9,53) 3SP09 SP09 5/ (7,94).7 (4,34) (9,53) 8 3SP0 SP0 5/ (7,94).94 (4,93) (9,53) 0 3SP SP 5/ (7,94).5 (,9) 7/ (,) 4 3SP SP 5/ (7,94).40 (3,5) 7/ (,) 3SP3 SP3 5/ (7,94).7 (4,34) 7/ (,) 8 3SP4 SP4 5/ (7,94).94 (4,93) 7/ (,) 0 3SP5 SP5 5/ (7,94).5 (,9) (,70) 4 3SP SP 5/ (7,94).40 (3,5) (,70) 3SP7 SP7 5/ (7,94).7 (4,34) (,70) 8 3SP8 SP8 5/ (7,94).94 (4,93) (,70) 0 3SP9 SP9 5/ (7,94).5 (,9) 9/ (4,9) 4 3SP0 SP0 5/ (7,94).40 (3,5) 9/ (4,9) 3SP SP 5/ (7,94).7 (4,34) 9/ (4,9) 8 3SP SP 5/ (7,94).94 (4,93) 9/ (4,9) 0 3SP3 SP3 5/ (7,94).5 (,9) (5,88) 4 3SP4 SP4 5/ (7,94).40 (3,5) (5,88) 3SP5 SP5 5/ (7,94).7 (4,34) (5,88) 8 3SP SP 5/ (7,94).94 (4,93) (5,88) 0 3SP7 SP7 5/ (7,94).5 (,9) / (7,4) 4 3SP8 SP8 5/ (7,94).40 (3,5) / (7,4) 3SP9 SP9 5/ (7,94).7 (4,34) / (7,4) 8 3SP30 SP30 5/ (7,94).94 (4,93) / (7,4) 0 3SP3 SP3 5/ (7,94).5 (,9) (9,05) 4 3SP3 SP3 5/ (7,94).40 (3,5) (9,05) 3SP33 SP33 5/ (7,94).7 (4,34) (9,05) 8 3SP34 SP34 5/ (7,94).94 (4,93) (9,05) 0 3SP35 SP35 5/ (7,94).5 (,9) 3/ (0,3) 4 3SP3 SP3 5/ (7,94).40 (3,5) 3/ (0,3) 3SP37 SP37 5/ (7,94).7 (4,34) 3/ (0,3) 8 3SP38 3SP39 3SP40 3SP4 SP38 SP39 SP40 SP4 5/ (7,94) 5/ (7,94) 5/ (7,94) 5/ (7,94).94 (4,93).5 (,9).40 (3,5).7 (4,34) 3/ 7/8 7/8 7/8 (0,3) (,) (,) (,) SP4 SP4 5/ (7,94).94 (4,93) 7/8 (,) 0 3SP43 SP43 5/ (7,94).5 (,9) 5/ (3,8) 4 3SP44 SP44 5/ (7,94).40 (3,5) 5/ (3,8) STANDAD NYLON SPACES V ITEM NUMBE DESCIPTION A B L SCEW 3SP45 SP45 5/ (7,94).7 (4,34) 5/ (3,8) 8 3SP4 SP4 5/ (7,94).94 (4,93) 5/ (3,8) 0 3SP47 SP47 5/ (7,94).5 (,9) (5,40) 4 3SP48 3SP49 SP48 SP49 5/ (7,94) 5/ (7,94).40 (3,5).7 (4,34) (5,40) (5,40) 8 3SP50 SP50 5/ (7,94).94 (4,93) (5,40) 0 3SP58 3SP59 3SP0 3SP 3SP 3SP3 3SP4 3SP5 3SP 3SP7 3SP8 3SP9 3SP70 3SP7 3SP7 SP58 SP59 SP0 SP SP SP3 SP4 SP5 SP SP7 SP8 SP9 SP70 SP7 SP7 (9,53) (9,53) (9,53) (9,53) (9,53) (9,53) (9,53) (9,53) (9,53) (9,53) (9,53) (9,53) (9,53) (9,53) (9,53).40 (3,5).7 (4,34).94 (4,93).40 (3,5).7 (4,34).94 (4,93).40 (3,5).7 (4,34).94 (4,93).40 (3,5).7 (4,34).94 (4,93).40 (3,5).7 (4,34).94 (4,93) /8 /8 /8 3/ 3/ 3/ 5/ 5/ 5/ (3,8) (3,8) (3,8) (4,7) (4,7) (4,7) (,35) (,35) (,35) (7,94) (7,94) (7,94) (9,53) (9,53) (9,53) SP73 3SP74 3SP75 3SP7 3SP77 3SP78 3SP79 3SP80 3SP8 3SP8 3SP83 3SP84 3SP85 3SP8 3SP87 3SP88 3SP89 3SP90 3SP9 3SP9 3SP93 3SP94 3SP95 3SP9 3SP97 3SP98 3SP99 3SP00 SP73 SP74 SP75 SP7 SP77 SP78 SP79 SP80 SP8 SP8 SP83 SP84 SP85 SP8 SP87 SP88 SP89 SP90 SP9 SP9 SP93 SP94 SP95 SP9 SP97 SP98 SP99 SP00 (9,53) (9,53) (9,53) (9,53) (9,53) (9,53) (9,53) (9,53) (9,53) (9,53) (9,53) (9,53) (9,53) (9,53) (9,53) (9,53) (9,53) (9,53) (9,53) (9,53) (9,53) (9,53) (9,53) (9,53) (9,53) (9,53) (9,53) (9,53).40 (3,5).7 (4,34).94 (4,93).40 (3,5).7 (4,34).94 (4,93).40 (3,5).7 (4,34).94 (4,93).40 (3,5).7 (4,34).94 (4,93).40 (3,5).7 (4,34).94 (4,93).40 (3,5).7 (4,34).94 (4,93).40 (3,5).7 (4,34).94 (4,93).40 (3,5).7 (4,34).94 (4,93).40 (3,5).7 (4,34).94 (4,93).40 (3,5) 7/ (,) 7/ (,) 7/ (,) (,70) (,70) (,70) 9/ (4,9) 9/ (4,9) 9/ (4,9) (5,88) (5,88) (5,88) / (7,4) / (7,4) / (7,4) (9,05) (9,05) (9,05) 3/ (0,4) 3/ (0,4) 3/ (0,4) 7/8 (,) 7/8 (,) 7/8 (,) 5/ (3,8) 5/ (3,8) 5/ (3,8) (5,40) mpsales@microplastics.com micro plastics, inc. WEBSITE: 9

70 TABLE F OF CONTENTS SPACES FINDEX A-Z V ALL STANDAD NYLON SPACES CAN BE TAPPED TWO THEAD SIZES LAGE THAN THE SCEW SIZE LISTED. FO EXAMPLE: 3SP03 WITH A SCEW SIZE OF CAN BE TAPPED THEAD. STANDAD NYLON SPACES ITEM NUMBE DESCIPTION A B L SCEW 3SP0 SP0 (9,53).7 (4,34) (5,40) 8 3SP0 SP0 (9,53).94 (4,93) 3SP03 3SP04 3SP05 3SP0 3SP07 3SP08 3SP09 3SP0 3SP 3SP 3SP3 3SP4 3SP5 3SP 3SP7 3SP8 3SP9 3SP0 3SP 3SP 3SP3 3SP4 3SP5 3SP 3SP7 3SP8 3SP9 3SP30 3SP3 3SP3 3SP33 SP03 SP04 SP05 SP0 SP07 SP08 SP09 SP0 SP SP SP3 SP4 SP5 SP SP7 SP8 SP9 SP0 SP SP SP3 SP4 SP5 SP SP7 SP8 SP9 SP30 SP3 SP3 SP33 (,70) (,70) (,70) (,70) (,70) (,70) (,70) (,70) (,70) (,70) (,70) (,70) (,70) (,70) (,70) (,70) (,70) (,70) (,70) (,70) (,70) (,70) (,70) (,70) (,70) (,70) (,70) (,70) (,70) (,70) (,70).40 (3,5).7 (4,34).94 (4,93).9 (5,5).0 (,0).40 (3,5).7 (4,34).94 (4,93).9 (5,5).0 (,0).40 (3,5).7 (4,34).94 (4,93).9 (5,5).0 (,0).40 (3,5).7 (4,34).94 (4,93).9 (5,5).57 (,53).40 (3,5).7 (4,34).94 (4,93).9 (5,5).57 (,53).40 (3,5).7 (4,34).94 (4,93).9 (5,5).57 (,53).40 (3,5) (5,40) /8 (3,8) /8 (3,8) /8 (3,8) /8 (3,8) /8 (3,8) 3/ (4,7) 3/ (4,7) 3/ (4,7) 3/ (4,7) 3/ (4,7) (,35) (,35) (,35) (,35) (,35) 5/ (7,94) 5/ (7,94) 5/ (7,94) 5/ (7,94) 5/ (7,94) (9,53) (9,53) (9,53) (9,53) (9,53) 7/ (,) 7/ (,) 7/ (,) 7/ (,) 7/ (,) `/ (,70) ITEM NUMBE DESCIPTION A B L SCEW 3SP34 3SP35 SP34 SP35 (,70) (,70).7 (4,34).94 (4,93) (,70) (,70) 8 0 3SP3 SP3 (,70).9 (5,5) (,70) 3SP37 SP37 (,70).57 (,53) (,70) 3SP38 SP38 (,70).40 (3,5) 9/ (4,9) 3SP39 3SP40 3SP4 3SP4 3SP43 3SP44 3SP45 3SP4 3SP47 SP39 SP40 SP4 SP4 SP43 SP44 SP45 SP4 SP47 (,70) (,70) (,70) (,70) (,70) (,70) (,70) (,70) (,70).7 (4,34).94 (4,93).9 (5,5).57 (,53).40 (3,5).7 (4,34).94 (4,93).9 (5,5).57 (,53) 9/ (4,9) 9/ (4,9) 9/ (4,9) 9/ (4,9) (5,88) (5,88) (5,88) (5,88) (5,88) SP48 SP48 (,70).40 (3,5) / (7,4) 3SP49 3SP50 3SP5 3SP5 3SP53 3SP54 3SP55 3SP 3SP57 3SP58 3SP59 3SP0 3SP 3SP 3SP3 3SP4 3SP5 3SP 3SP7 3SP8 3SP9 3SP70 3SP7 3SP7 3SP73 3SP74 3SP75 3SP7 3SP77 SP49 SP50 SP5 SP5 SP53 SP54 SP55 SP SP57 SP58 SP59 SP0 SP SP SP3 SP4 SP5 SP SP7 SP8 SP9 SP70 SP7 SP7 SP73 SP74 SP75 SP7 SP77 (,70) (,70) (,70) (,70) (,70) (,70) (,70) (,70) (,70) (,70) (,70) (,70) (,70) (,70) (,70) (,70) (,70) (,70) (,70) (,70) (,70) (,70) (,70) (,70) (,70) (,70) (,70) (,70) (,70).7 (4,34).94 (4,93).9 (5,5).57 (,53).40 (3,5).7 (4,34).94 (4,93).9 (5,5).0 (,0).40 (3,5).7 (4,34).94 (4,93).9 (5,5).0 (,0).40 (3,5).7 (4,34).94 (4,93).9 (5,5).0 (,0).40 (3,5).7 (4,34).94 (4,93).9 (5,5).57 (,53).40 (3,5).7 (4,34).94 (4,93).9 (5,5).57 (,53) / (7,4) / (7,4) / (7,4) / (7,4) (9,05) (9,05) (9,05) (9,05) (9,05) 3/ (0,4) 3/ (0,4) 3/ (0,4) 3/ (0,4) 3/ (0,4) 7/8 (,) 7/8 (,) 7/8 (,) 7/8 (,) 7/8 (,) 5/ (3,8) 5/ (3,8) 5/ (3,8) 5/ (3,8) 5/ (3,8) (5,40) (5,40) (5,40) (5,40) (5,40) TELEPHONE: (870) 453- / micro plastics, inc. FAX: (870)

71 TABLE F OF CONTENTS F SPACES V STANDAD LONG NYLON SPACES ITEM NUMBE DESCIPTION A B L ITEM NUMBE DESCIPTION A B L 3SP300 SP 300 (,35).5 (,9) -/ (7,00) 3SP34 SP 34 5/ (7,94).40 (3,5) - (38,0) 3SP30 SP 30 (,35).40 (3,5) -/ (7,00) 3SP35 SP 35 5/ (7,94).7 (4,34) - (38,0) 3SP304 SP 304 (,35).5 (,9) -/8 (8,58) 3SP3 SP 3 5/ (7,94).94 (4,93) - (38,0) 3SP305 3SP308 3SP309 3SP3 3SP33 3SP3 3SP37 3SP30 3SP3 3SP34 3SP35 3SP38 3SP39 3SP335 3SP33 3SP337 3SP338 3SP339 3SP340 3SP34 3SP34 3SP343 3SP344 3SP345 3SP34 3SP347 SP 305 SP 308 SP 309 SP 3 SP 33 SP 3 SP 37 SP 30 SP 3 SP 34 SP 35 SP 38 SP 39 SP 335 SP 33 SP 337 SP 338 SP 339 SP 340 SP 34 SP 34 SP 343 SP 344 SP 345 SP 34 SP 347 (,35) (,35) (,35) (,35) (,35) (,35) (,35) (,35) (,35) (,35) (,35) (,35) (,35) 5/ (7,94) 5/ (7,94) 5/ (7,94) 5/ (7,94) 5/ (7,94) 5/ (7,94) 5/ (7,94) 5/ (7,94) 5/ (7,94) 5/ (7,94) 5/ (7,94) 5/ (7,94) 5/ (7,94).40 (3,5).5 (,9).40 (3,5).5 (,9).40 (3,5).5 (,9).40 (3,5).5 (,9).40 (3,5).5 (,9).40 (3,5).5 (,9).40 (3,5).5 (,9).40 (3,5).7 (4,34).94 (4,93).5 (,9).40 (3,5).7 (4,34).94 (4,93).5 (,9).40 (3,5).7 (4,34).94 (4,93).5 (,9) -/8-3/ -3/ / -5/ / -7/ - - -/ -/ -/ -/ -/8 -/8 -/8 -/8-3/ -3/ -3/ -3/ - (8,58) (30,8) (30,8) (3,75) (3,75) (33,35) (33,35) (34,93) (34,93) (3,53) (3,53) (38,0) (38,0) (7,00) (7,00) (7,00) (7,00) (8,58) (8,58) (8,58) (8,58) (30,8) (30,8) (30,8) (30,8) (3,75) 3SP37 3SP373 3SP374 3SP375 3SP37 3SP377 3SP378 3SP379 3SP380 3SP38 3SP38 3SP383 3SP384 3SP385 3SP38 3SP387 3SP388 3SP389 3SP390 3SP39 3SP39 3SP393 3SP394 3SP395 SP 37 SP 373 SP 374 SP 375 SP 37 SP 377 SP 378 SP 379 SP 380 SP 38 SP 38 SP 383 SP 384 SP 385 SP 38 SP 387 SP 388 SP 389 SP 390 SP 39 SP 39 SP 393 SP 394 SP 395 (9,53) (9,53) (9,53) (9,53) (9,53) (9,53) (9,53) (9,53) (9,53) (9,53) (9,53) (9,53) (9,53) (9,53) (9,53) (9,53) (9,53) (9,53) (9,53) (9,53) (9,53) (9,53) (9,53) (9,53).40 (3,5).7 (4,34).94 (4,93).40 (3,5).7 (4,34).94 (4,93).40 (3,5).7 (4,34).94 (4,93).40 (3,5).7 (4,34).94 (4,93).40 (3,5).7 (4,34).94 (4,93).40 (3,5).7 (4,34).94 (4,93).40 (3,5).7 (4,34).94 (4,93).40 (3,5).7 (4,34).94 (4,93) -/ (7,00) -/ (7,00) -/ (7,00) -/8 (8,58) -/8 (8,58) -/8 (8,58) -3/ (30,8) -3/ (30,8) -3/ (30,8) - (3,75) - (3,75) - (3,75) -5/ (33,35) -5/ (33,35) -5/ (33,35) - (34,93) - (34,93) - (34,93) -7/ (3,53) -7/ (3,53) -7/ (3,53) - (38,0) - (38,0) - (38,0) 3SP348 SP 348 5/ (7,94).40 (3,5) - (3,75) 3SP349 SP 349 5/ (7,94).7 (4,34) - (3,75) Tough and resilient, nylon spacers are useful for many applications. Ideal 3SP350 3SP35 3SP35 3SP353 SP 350 SP 35 SP 35 SP 353 5/ (7,94) 5/ (7,94) 5/ (7,94) 5/ (7,94).94 (4,93).5 (,9).40 (3,5).7 (4,34) - -5/ -5/ -5/ (3,75) (33,35) (33,35) (33,35) for use in electrical and electronic assemblies, they also can be used as bushings, bearings, rollers, and glides. Molded from corrosion resistant Type Nylon, all parts are available on short delivery from standard tooling. Samples for testing are available but NOT ALL SIZES are 3SP354 SP 354 5/ (7,94).94 (4,93) -5/ (33,35) 3SP355 SP 355 5/ (7,94).5 (,9) - (34,93) in stock. Special sizes and lengths at a slight extra tooling charge. 3SP35 3SP357 3SP358 SP 35 SP 357 SP 358 5/ (7,94) 5/ (7,94) 5/ (7,94).40 (3,5).7 (4,34).94 (4,93) (34,93) (34,93) (34,93) Parts are stocked in Nylon / UL 94V Parts can be furnished in: Acetal, esin Celanese Celcon M70 UL 94HB 3SP359 SP 359 5/ 7,94).5 (,9) -7/ (3,53) 3SP30 SP 30 5/ (7,94).40 (3,5) -7/ (3,53) Tolerances: O.D. +/-.05; I.D. +/-.005; Length +/-.05 3SP3 3SP3 3SP33 SP 3 SP 3 SP 33 5/ (7,94) 5/ (7,94) 5/ (7,94).7 (4,34).94 (4,93).5 (,9) -7/ -7/ - (3,53) (3,53) (38,0) mpsales@microplastics.com micro plastics, inc. WEBSITE: 7

72 TABLE F OF CONTENTS SPACES FINDEX A-Z V SPECIAL NYLON SPACES ITEM NUMBE DESCIPTION A B L 3S04530 S (3,8).078 (,98) 5/ (7,94) 3S0453 S (3,50).038 (0,97).5 (3,7) 3S0040 S (4,0).00 (,54) 3/3 (0,3) 3S0800 S (4,89).093 (,3) 3/4 (5,) 3S0874 S (4,77).09 (,9).5 (3,) 3S0875 S (4,75).07 (,70) 9/4 (3,58) 3S0870 S (4,75).09 (,44) 5/3 (3,97) 3S087 S (4,75).03 (,0).00 (5,08) 3S087 S 87 3/ (4,7).5 (,9) 9/3 (7,4) 3S0875 S (4,75).0 (3,05) 5/ (7,94) 3S087 S (4,75).35 (3,43) (,35) 3S08730 S (4,75).0 (3,05) /3 (8,7) 3S08735 S (4,75).0 (3,05) 7/ (,) 3S08785 S (4,75).09 (,3) 7/3 (,4) 3S08790 S (4,75).09 (,3) 3/4 (3,87) 3S09330 S (4,90).5 (3,8) (,35) 3S00030 S (5,08).45 (3,8) /4 (4,37) 3S0003 S (5,08).45 (3,8).0 (,79) 3S0003 S (5,03).09 (,77).345 (8,7) 3S0033 S (5,).30 (3,30) 9/3 (7,4) 3S005 S 05.0 (5,33).5 (3,9).50 (,35) 3S0337 S (5,54).5 (3,8).385 (9,78) 3S0535 S (5,4).45 (3,8) /4 (8,33) 3S0830 S (5,54).40 (3,5) 5/3 (3,97) 3S003 S 03.0 (5,59).38 (3,50) /3 (,) 3S0404 S (,).75 (4,45) 5/3 (3,97) 3S050 S (,35).7 (4,34).43 (0,49) 3S050 S (,35). (3,0) 5/4 (0,) 3S0503 S (,35).7 (4,34).355 (9,0) 3S0504 S (,35).5 (3,8).83 (0,90) 3S0505 S (,35). (4,) (,70) 3S0507 S (,45).50 (3,8). (4,) 3S0508 S (,35).7 (4,34).575 (4,) 3S0509 S (,35).7 (4,34).475 (,07) 3S0504 S (,35).0 (3,05).389 (9,88) 3S0504 S (,35).5 (3,8).40 (0,7) 3S05048 S (,35).5 (,9) 7/3 (5,55) 3S05050 S (,35).47 (3,73) 9/4 (7,5) 3S05053 S (,35).40 (3,5) 7/3 (3,49) 3S05055 S (,35).40 (3,5) 35/4 (3,87) 3S0505 S (,35).40 (3,5).40 (,) 3S050 S 50.0 (,0).00 (5,08) 9/3 (5,08) 3S0505 S (,35).0 (4,0).750 (9,05) 3S05070 S (,35).4 (3,58) 9/3 (7,4) 3S05075 S (,35).5 (,9).07 (5,) 3S05090 S (,35).5 (,9) -5/ (33,3) 3S0509 S (,38).5 (3,8) 5/3 (3,97) 7 TELEPHONE: (870) 453- / micro plastics, inc. FAX: (870)

73 TABLE F OF CONTENTS SPACES FINDEX A-Z V SPECIAL NYLON SPACES ITEM NUMBE DESCIPTION A B L 3S05095 S (,38).5 (,9) 7/3 (3,49) 3S07540 S (,99).95 (4,95).40 (0,) 3S08030 S (7,).70 (4,3).300 (7,) 3S08038 S (7,).5 (3,8) 9/4 (7,54) 3S08 S 8.84 (7,).4 (5,9).400 (0,) 3S098 S 98.9 (7,5).5 (3,8) 3/3 (,38) 3S030 S 30.3 (7,93).095 (,4) (,35) 3S03 S 3.3 (7,93).94 (4,93).405 (35,8) 3S03 S 3.3 (7,93).94 (4,93).530 (3,4) 3S034 S 34.3 (7,93).40 (3,5) 9/3 (7,4) 3S03 S 3.3 (7,93).95 (4,95).4 (5,44) 3S035 S 35.3 (7,93).5 (3,9). (,50) 3S03 S 3 5/ (7,94).8 (5,79).0 (,0) 3S0330 S (7,93).4 (,5) (,35) 3S0343 S 343 5/ (7,94).7 (4,34) -7/ (,93) 3S0344 S (7,93).94 (4,93).55 (9,33) 3S0350 S (7,93).4 (,5).495 (,57 3S035 S 35.3 (7,93).7 (4,34) -7/8 (47,3) 3S035 S (,9).345 (8,7) 3/ (4,75) 3S0353 S (7,95).87 (4,75).7 (4,34) 3S0354 S 354 5/ (7,94).7 (4,34).7 (7,04) 3S0355 S (8,3).5 (5,4).0 (5,59) 3S0358 S (7,93).5 (5,7) 7/ (,) 3S0340 S (8,03).88 (4,78) 3/4 (5,) 3S034 S (,35).0 (3,05).00 (5,08) 3S S (8,99).7 (4,37).53 (3,49) 3S0303 S (9,4).3 (8,03) (,35) 3S S (9,40).5 (,73) 5/3 (3,9) 3S03703 S (9,53).54 (,45).453 (,5) 3S03704 S (9,40).94 (4,93).48 (0,) 3S03744 S (9,50).48 (,30) 3/3 (0,3) 3S03754 S (9,55).75 (4,45).50 (3,8) 3S03755 S (9,53).9 (5,5) 5/3 (3,9) 3S03757 S (9,53).9 (5,5) /4 (4,3) 3S03758 S (9,53).5 (,40) 3/ (4,75) 3S03750 S (9,53).9 (5,5) 3/4 (5,) 3S0375 S (9,53).8 (5,54) 7/ (,) 3S0375 S (9,53).0 (5,59) (9,53) 3S03755 S (9,53).5 (5,7).50 (,35) 3S S (9,53).40 (3,5) /3 (8,73) 3S S (9,53).55 (,48).380 (9,5) 3S03754 S (9,53).5 (,73) (,35) 3S03754 S (9,53).094 (,39) 9/3 (7,4) 3S S (9,53).03 (5,) 7/4 (,74) 3S S (9,53).03 (5,) 7/4 (,78) 3S S (9,53).5 (,40) (9,53) 3S03755 S (9,53).5 (,73) (9,53) mpsales@microplastics.com micro plastics, inc. WEBSITE: 73

74 TABLE F OF CONTENTS SPACES FINDEX A-Z V SPECIAL NYLON SPACES ITEM NUMBE DESCIPTION A B L 3S S (9,53).50 (,35).593 (5,0) 3S03755 S (9,53).5 (,73) (,70) 3S S (9,53).40 (3,5).700 (7,78) 3S03757 S (9,53).55 (,48).700 (7,78) 3S S (9,53).5 (,73) 7/8 (,) 3S S (9,53).5 (,73) (5,40) 3S S (9,53).57 (,53) - (3,75) 3S S (9,53).5 (,73) (9,05) 3S S (9,53).5 (,9) -/ (7,00) 3S S (9,5).30 (8,3).38 (9,70) 3S03858 S 3858 (5,88).385 (9,78).87 (4,75) 3S S (9,88).5 (,38) /8 (3,8) 3S03935 S (9,98).5 (3,83) (,35) 3S03934 S (9,98).9 (4,9) 5/4 (5,94) 3S S (0,03).30 (8,3).59 (5,0) 3S S (0,).40 (3,5) 3/3 (8,5) 3S S (0,).40 (3,5) 5/3 (9,84) 3S04030 S (0,3).9 (,83) (,35) 3S0400 S (0,3).7 (,78) (,70) 3S04070 S (0,3).5 (,73) (9,05) 3S04075 S (0,3).80 (7,) (9,53) 3S04085 S (0,3).5 (,73) (5,40) 3S04700 S (0,85).8 (4,) 47/4 (8,4) 3S0470 S (0,0). (,50).0 (5,59) 3S04378 S (,0).3 (7,9).8 (7,4) 3S04379 S / (,).7 (4,34).55 (,4) 3S S (,43).35 (8,) 7/4 (0,7) 3S0400 S (,8).5 (,40) 9/ (4,9) 3S0439 S (,7).90 (4,83) 5/ (7,9) 3S0483 S (,89).34 (7,98).30 (5,84) 3S0480 S (,94).0 (3,05) 3/4 (9,) 3S04805 S (,0).9 (4,85) /4 (8,33) 3S04840 S (,9).343 (8,7) 3/ (4,7) 3S0484 S (,34).30 (8,3).375 (9,53) 3S05000 S (,70).30 (8,3).70 (,8) 3S05004 S (,7).49 (,3).390 (9,9) 3S05005 S (,70).94 (4,93) 3/3 (0,3) 3S0500 S (,70).5 (,73).5 (3,9) 3S05007 S (,70).5 (,73).00 (5,08) 3S05008 S (,70).57 (,53) 5/4 (5,94) 3S05009 S (,70).95 (4,95).45 (3,74) 3S0500 S (,70).0 (,0) (,35) 3S05003 S (,70).8 (7,4) 3/ (0,4) 3S05005 S (,70).70 (4,3).55 (,48) 3S05007 S (,70).70 (4,3).70 (,8) 3S05008 S (,70).3 (7,93) 5/3 (3,97) 3S05003 S (,70).38 (9,70).3 (7,9) 3S S (,70).344 (8,74) 3/ (0,4) 3S05004 S (,70).375 (9,53).5 (5,7) 74 TELEPHONE: (870) 453- / micro plastics, inc. FAX: (870)

75 TABLE F OF CONTENTS SPACES FINDEX A-Z V SPECIAL NYLON SPACES ITEM NUMBE DESCIPTION A B L 3S S (,70).57 (,53) 3/3 (0,3) 3S05004 S 5004 (,70).3 (7,93) -5/ (33,33) 3S S (,70).38 (9,34).470 (,94) 3S S (,70).38 (8,33) (5,40) 3S S (,70).383 (9,73) (,70) 3S05000 S (,47).57 (,53) (9,53) 3S0500 S (,70).335 (8,5).09 (5,3) 3S0500 S (,83).385 (9,78) 5/3 (3,97) 3S05003 S (,70).85 (7,4).30 (,00) 3S S (,70).3 (8,03) (,70) 3S S (,70).380 (9,5) 7/4 (0,7) 3S05008 S (,70).375 (9,53) 7/ (,) 3S S (,70).8 (7,4) (9,53) 3S S (,70).0 (,0) - (4,8) 3S S (,70).375 (9,53).380 (9,5) 3S S (,70).375 (9,53) (5,88) 3S05009 S (,70).375 (9,53).35 (,3) 3S S (,70).85 (7,4).930 (3,) 3S S (,70).375 (9,53) / (7,4) 3S S (,70).385 (9,78) (5,40) 3S05009 S (,70).0 (,0) - (34,93) 3S050 S (,95).30 (8,3) 7/8 (,) 3S05030 S (4,).379 (9,3) (9,53) 3S0503 S (4,7).375 (9,53) (,70) 3S05 S (3,97).45 (,) 9/ (4,9) 3S05337 S (4,30).8 (7,4) (9,53) 3S055 S (4,35).33 (8,38).5 (4,) 3S0578 S (4,40).38 (8,08) 35/4 (3,87) 3S05740 S (4,40).437 (,0).40 (0,3) 3S05703 S (4,48).30 (8,3) 35/4 (3,87) 3S S (4,9).3 (7,9).30 (7,87) 3S05903 S (4,99).34 (7,98) 3/4 (9,) 3S00550 S (5,39).03 (5,) (5,88) 3S008 S 08.5 (5,).385 (9,78) 3/ (4,7) 3S073 S 73.7 (5,7).33 (7,95) / (7,4) 3S00 S 0.0 (5,75).350 (8,89) 3/ (4,7) 3S0035 S (5,75).507 (,89) -/ (4,85) 3S0040 S (5,75).504 (,80) 3/ (0,4) 3S0050 S (5,75).504 (,80).405 (35,9) 3S00 S 0.0 (5,75).504 (,80).5 (5,88) 3S033 S 33.3 (5,8).3 (7,90) 3/ (0,4) 3S054 S 54.5 (5,88).0 (4,0).3 (7,9) 3S055 S 55.0 (5,75).33 (8,0) 5/3 (3,9) 3S059 S 59.5 (5,88).9 (4,85) (,35) 3S050 S 50.3 (,00).50 (,70) - (3,75) 3S05 S 5.5 (5,88).40 (3,5).375 (9,53) 3S05 S 5.5 (5,88).435 (,0) (,35) 3S053 S (,3).385 (9,78).30 (5,84) 3S054 S 54.5 (5,88).4 (0,4).55 (3,94) mpsales@microplastics.com micro plastics, inc. WEBSITE: 75

76 TABLE F OF CONTENTS SPACES FINDEX A-Z V SPECIAL NYLON SPACES ITEM NUMBE DESCIPTION A B L 3S055 S 55.5 (5,88).390 (9,9) (,35) 3S05 S 5.5 (5,88).380 (9,5).750 (9,05) 3S057 S 57.5 (5,88).38 (8,33).50 (,35) 3S058 S 58.5 (5,88).80 (7,) 7/ (,0) 3S0530 S (5,49).50 (,35) (9,53) 3S053 S 53.5 (5,88).0 (,0) (,35) 3S0535 S (5,88).500 (,70) 5/ (7,94) 3S0537 S (5,88).34 (8,9) (9,53) 3S0538 S (5,93).484 (,9).47 (,8) 3S0540 S (5,88).375 (9,53) (9,53) 3S054 S 54.5 (5,88).375 (9,53).4 (,73) 3S0550 S (5,57).8 (7,4) (,70) 3S00 S 0.5 (5,).8 (7,4) 3/ (0,4) 3S0 S.5 (5,88).38 (9,80) 39/4 (5,47) 3S05 S 5.5 (5,88).450 (,43) (5,88) 3S0570 S (,3).45 (0,80) 7/8 (,) 3S057 S 57.5 (5,88).450 (,43) 7/8 (,) 3S057 S 57.8 (5,70).500 (,70) 3/4 (,9) 3S0573 S (5,88).38 (9,80).738 (8,75) 3S0580 S (5,88).57 (,53) /8 (3,8) 3S058 S 58.5 (5,88).375 (9,53).08 (,08) 3S0590 S (5,49). (,50) - (38,0) 3S050 S 50.0 (5,75).507 (,89) (,70) 3S03050 S (,00).378 (9,0).50 (,70) 3S03550 S (,3).50 (3,).500 (,70) 3S0354 S (3,9).35 (,3).4 (,8) 3S0550 S (,).5 (3,) (,70) 3S05830 S (,50).80 (7,) 3/4 (9,) 3S0850 S (,97).50 (,85) 5/ (3,8) 3S087 S (7,45).0 (,0).457 (,) 3S087 S (7,45).5 (3,9) /8 (3,8) 3S09038 S (7,7).00 (5,4).5 (4,) 3S09039 S (7,7).390 (9,9) (5,88) 3S0780 S (8,4).5 (3,3) 7/3 (5,55) 3S078 S (8,9).39 (9,9).30 (5,84) 3S0788 S (8,4).5 (3,3) 9/3 (7,4) 3S07050 S (8,9).55 (3,08).49 (,45) 3S S (8,54).5 (,73).95 (7,49) 3S07500 S (9,05).80 (7,). (,8) 3S07500 S (8,80).50 (,35) (,35) 3S0750 S (8,90).397 (0,08).37 (9,4) 3S0750 S (8,9).387 (9,83).87 (4,75) 3S07503 S (9,0).480 (,9). (5,74) 3S07504 S 7504 (9,05).35 (8,00) 5/ (7,94) 3S07505 S (9,05).58 (,55) 7/ (,0) 3S0750 S (9,05).0 (,0).375 (9,53) 3S07507 S 7507 (9,05) 5/ (7,94) 9/ (4,9) 3S07508 S 7508 (9,05). (,7) 5/ (7,94) 3S07509 S (9,05).370 (9,40) /3 (8,7) 7

77 TABLE F OF CONTENTS SPACES FINDEX A-Z V SPECIAL NYLON SPACES ITEM NUMBE DESCIPTION A B L 3S S (9,05).40 (0,3).5 (4,7) 3S07503 S (9,05).35 (8,00).87 (4,75) 3S07503 S (9,05).385 (9,78) 3/4 (5,) 3S S / 4 (9,05) (,35) 3/ (4,7) 3S S (9,05).55 (3,08).340 (8,4) 3S S (9,05).45 (,5).3 (9,7) 3S07503 S (9,05).3 (7,9).938 (3,8) 3S S (8,9).50 (,35) (9,53) 3S S (9,05).490 (,45) (9,53) 3S S (9,05).33 (8,0).50 (,35) 3S07504 S (8,80).390 (9,9) (5,40) 3S07504 S (9,05).0 (,0).5 (5,88) 3S S (8,80).30 (7,87).437 (,0) 3S S (44,45) (5,88) (,35) 3S S (8,9).385 (9,78) 5/ (7,9) 3S07504 S (9,05).40 (,8) (,35) 3S S (9,05).380 (9,5).47 (,99) 3S07505 S 7505 (9,05).0 (,0) 9/ (4,9) 3S S (9,05).50 (,95).700 (7,78) 3S S (9,05).3 (8,3) (9,05) 3S07507 S (9,05).30 (8,3) (5,40) 3S S (9,8).400 (0,).90 (7,73) 3S S S 7508 S (9,30).70 (9,30).40 (0,9).394 (0,0).00 (5,4).90 (3,) 3S S S 7599 S (9,8).775 (9,9).50 (7,73).507 (,89).05 (5,) (,35) 3S08045 S (0,40).50 (3,) (,70) 3S08 S 8.8 (0,3).3 (7,93) /8 (3,8) 3S083 S 83.8 (0,3).403 (0,4).50 (,35) 3S084 S 84.8 (0,3).403 (0,4).70 (8,03) 3S08 S 8.85 (0,95).03 (5,) (5,88) 3S083 3S S 83 S (0,95).870 (,0).57 (,53).53 (3,49).370 5/4 (9,40) (9,9) 3S08704 S (,00) (,35).394 (0,0) 3S S (,3).330 (8,38).375 (9,53) 3S S S S (,3.875 (,3).375 (9,53).5 (,73) (7,9) (9,53) 3S S (,3).5 (,38).5 (5,88) 3S S (,3).80 (7,).500 (,70) 3S S (,48).438 (,3).370 (9,40) 3S09775 S (3,9).785 (9,94).750 (9,05) 3S S (4,03).48 (,30).500 (,70) 3S09858 S (5,0).85 (7,4) (,35) 3S S (4,89).35 (8,84) (,70) 3S000 S (5,40).50 (,35) /8 (3,8) 3S0003 S (5,5).344 (8,74) 5/ (7,9) 3S0004 3S0008 3S0000 S 0004 S 0008 S (5,40).00 (5,40).990 (5,5).0 (,0).50 (,35).87 (4,75) 3/ (9,53) (4,7) (,35) mpsales@microplastics.com micro plastics, inc. WEBSITE: 77

78 TABLE F OF CONTENTS SPACES FINDEX A-Z V SPECIAL NYLON SPACES ITEM NUMBE DESCIPTION A B L 3S000 S (5,40).50 (,35) (,35) 3S000 S (5,40).375 (9,53).800 (0,3) 3S0005 S (5,40).95 (3,4) (,35) 3S000 S (5,40).50 (,35) 7/ (,0) 3S00030 S (5,40).50 (,35).5 (5,7) 3S0003 S (5,40) 33/4 (3,0).375 (9,5) 3S00037 S (5,40).385 (9,78) (9,53) 3S00038 S (5,40).00 (5,08) (9,53) 3S00043 S (5,40).40 (0,3) 7/ (,0) 3S00050 S (5,40).755 (9,8) 3/4 (5,) 3S0005 S (5,40).43 (,33).500 (,70) 3S00054 S (5,40).375 (9,53).50 (,70) 3S0005 S (5,40).75 (9,43) 9/ (4,9) 3S00057 S (9,97).50 (,35).7 (5,5) 3S00058 S (4,99).3 (9,9) (9,53) 3S0000 S (5,07).500 (,70) (9,53) 3S00555 S (5,04).375 (9,53) (,35) 3S0570 S (,85).8 (0,3) /8 (3,8) 3S0 S (,80).740 (8,80) 3/ (4,7) 3S07 S 07.0 (8,45).05 (5,78).375 (9,53) 3S08 S 08.0 (8,45).8 (7,4) 7/ (,0) 3S030 S (3,50).505 (,83).500 (,70) 3S5075 S (3,75).77 (4,50) (5,88) 3S5080 S (3,75).4 (,3).08 (,08) 3S508 S (3,75).875 (,) 9/ (4,9) 3S508 S (3,75).55 (,48).53 (3,49) 3S550 S (3,50).3 (7,93) (7,9) 3S53 S 53 - (3,75).77 (4,50) 9/ (4,9) 3S53 S (3,75).50 (,95) 5/ (,35) 3S533 S (3,47).7 (9,33) 9/ (4,9) 3S5387 S (3,75).380 (9,5).38 (9,5) 3S5500 S (3,50).307 (7,80) (,70) 3S550 S (3,75).400 (0,) (5,88) 3S5750 S 5750 (3,75) 7/4 (,7).750 (9,05) 3S0 S 0. (3,05).043 (,49).950 (4,3) 3S355 S (33,33).078 (7,38) (9,05) 3S3 S 3-5/(33,33).385 (9,78).00 (,54) 3S3750 S (34.93).5 (,) /8 (3,8) 3S4050 S (37,08).5 (3,3).500 (,70) 3S500 S (38,0).87 (30,5) 3/4 (9,3) 3S50050 S (38,0).0 (5,9).50 (,70) 3S590 S (4,8).388 (35,) 3/3 (,38) 3S7503 S (44,45).98 (3,57) 9/3 (7,4) 3S8750 S (47,4).50 (,35) (5,40) 3S3580 S (54,3).70 (44,70) /8 (3,8) 3S358 S (54,0).3 (4,40).30 (3,30) 78 TELEPHONE: (870) 453- / micro plastics, inc. FAX: (870)

79 TABLE F OF CONTENTS SPACES FINDEX A-Z Molded from Type Nylon and then machine tapped, these spacers are low cost insulators that can be used in many electrical applications. Special sizes can be made to order from our large untapped spacer inventory. V TAPPED NYLON SPACES NOTE: ON THEADED SPACES AND LONGE, THE TAP IS FOM EACH END AND NOT CONTINUOUS THOUGH. ITEM NUMBE DESCIPTION D L TAPPED ITEM NUMBE DESCIPTION D L TAPPED 5TSP055 TSP 55 3/ (4,7) 7/ (,) -5 5TSP044 TSP 44 (9,53) (5,88) 0-3**** 5TSP05 TSP 5 3/ (4,7) (,70) -5 5TSP04 TSP 4 (9,53) (9,05) 0-3**** 5TSP0 TSP 0 3/ (4,7) 7/4 (,73) 4-40* 5TSP045 TSP 45 (9,53) 7/8 (,) 0-3**** 5TSP057 TSP 57 (,35) (,35) -5 5TSP05 TSP 5 (9,53) (5,40) 0-3**** 5TSP00 TSP (,35) (,35) 4-40* 5TSP0 TSP (,70) (,35) 0-3**** 5TSP050 TSP 50 (,35) 5/ (7,94) 4-40* 5TSP07 TSP 7 (,70) (9,53) 0-3**** 5TSP00 TSP (,35) (9,53) 4-40* 5TSP08 TSP 8 (,70) (,70) 0-3**** 5TSP003 TSP 3 (,35) (,70) 4-40* 5TSP04 TSP 4 (,70) (5,88) 0-3**** 5TSP03 TSP 3 (,35) (5,88) 4-40* 5TSP09 TSP 9 (,70) (9,05) 0-3**** 5TSP004 TSP 4 (,35) (9,05) 4-40* 5TSP047 TSP 47 (,70) 7/8 (,) 0-3**** 5TSP037 TSP 37 (,35) 7/8 (,) 4-40* 5TSP030 TSP 30 (,70) (5,40) 0-3**** 5TSP005 TSP 5 (,35) (5,40) 4-40* 5TSP03 TSP 3 (,70) (,35) 5TSP00 TSP (,35) (,35) -3** 5TSP03 TSP 3 (,70) (9,53) 5TSP054 TSP 54 (,35) 5/ (7,94) -3** 5TSP033 TSP 33 (,70) (,70) 5TSP007 TSP 7 (,35) (9,53) -3** 5TSP048 TSP 48 (,70) (5,88) 5TSP008 TSP 8 (,35) (,70) -3** 5TSP034 TSP 34 (,70) (9,05) 5TSP05 TSP 5 (,35) 9/ (4,9) -3** 5TSP049 TSP 49 (,70) 7/8 (,) 5TSP038 TSP 38 (,35) (5,88) -3** 5TSP035 TSP 35 (,70) (5,40) 5TSP009 TSP 9 (,35) (9,05) -3** 5TSP099 TSP 99 3/ (4,7) 5/3 (3,97) TSP05 TSP 5 (,35) 5/ (3,8) -3** 5TSP00 TSP 00 3/ (4,7) 3/ (4,7) TSP039 TSP 39 (,35) 7/8 (,) -3** 5TSP0 TSP 0 3/ (4,7) (,35) TSP00 TSP 0 (,35) (5,40) -3** 5TSP0 TSP 0 3/ (4,7) 5/ (7,94) TSP053 TSP 53 (,35) (38,0) -3** 5TSP03 TSP 03 3/ (4,7) (9,53) TSP0 TSP (,35) (,35) 8-3*** 5TSP04 TSP 04 3/ (4,7) 7/ (,) TSP0 TSP (,35) (9,53) 8-3*** 5TSP05 TSP 05 3/ (4,7) (,70) TSP03 TSP 3 (,35) (,70) 8-3*** 5TSP07 TSP 07 3/ (4,7) (5,88) TSP040 TSP 40 (,35) (5,88) 8-3*** 5TSP09 TSP 09 3/ (4,7) (9,05) TSP04 TSP 4 (,35) (9,05) 8-3*** 5TSP TSP 3/ (4,7) 7/8 (,) TSP04 TSP 4 (,35) 7/8 (,) 8-3*** 5TSP5 TSP 5 3/ (4,7) (5,40) TSP05 TSP 5 (,35) (5,40) 8-3*** 5TSP40 TSP 40 3/ (4,7) 3/ (4,7) -3 5TSP0 TSP 5/ (7,94) (,35) 8-3*** 5TSP4 TSP 4 3/ (4,7) (,35) -3 5TSP07 TSP 7 5/ (7,94) (9,53) 8-3*** 5TSP4 TSP 4 3/ (4,7) 5/ (7,94) -3 5TSP08 TSP 8 5/ (7,94) (,70) 8-3*** 5TSP43 TSP 43 3/ (4,7) (9,53) -3 5TSP04 TSP 4 5/ (7,94) (5,88) 8-3*** 5TSP44 TSP 44 3/ (4,7) 7/ (,) -3 5TSP09 TSP 9 5/ (7,94) (9,05) 8-3*** 5TSP45 TSP 45 3/ (4,7) (,70) -3 5TSP043 TSP 43 5/ (7,94) 7/8 (,) 8-3*** 5TSP47 TSP 47 3/ (4,7) (5,88) -3 5TSP00 TSP 0 5/ (7,94) (5,40) 8-3*** 5TSP49 TSP 49 3/ (4,7) (9,05) -3 5TSP0 TSP (9,53) (,35) 0-3**** 5TSP5 TSP 5 3/ (4,7) 7/8 (,) -3 5TSP0 TSP (9,53) (9,53) 0-3**** 5TSP55 TSP 55 3/ (4,7) (5,40) -3 5TSP03 TSP 3 (9,53) (,70) 0-3**** *NOTE THESE ITEMS AE AVAILABLE IN TIC THEADS. 4-40* Available in M3 Thread -3** Available in M3.5 Thread 8-3*** Available in M4 Thread 0-3**** Available in M5 Thread To order metric threads, simply add an M to the Part Number. EXAMPLE: 5TSP00 with a -3 Thread, Becomes 5MTSP00 with a M3.5 Thread mpsales@microplastics.com micro plastics, inc. WEBSITE: 79

80 TABLE F OF CONTENTS SPACES FINDEX A-Z V Self-threading, use with tapping screws designed for plastics. HEX NYLON SPACES SELF ITEM TAPPING NUMBE DESCIPTION ID SCEW L A 35HSP4 HSP 4.07 (,83) (9,53) 3/ 35HSP3 HSP (,9) 9/ (4,8) 3/ 35HSP0 HSP 0.09 (,3) 4 (,35) 3/ 35HSP0 HSP 0.09 (,3) 4 (9,53) 3/ 35HSP4 HSP 4.09 (,3) 4 (9,05) 3/ 35HSP03 HSP (,3) 4 (,70) 3/ 35HSP HSP.09 (,3) 4 9/ (4,7) 3/ 35HSP9 HSP 9.09 (,3) 4 (5,88) 3/ 35HSP04 HSP (,3) 4 7/ (,0) 3/ 35HSP HSP.09 (,3) 4 7/8 (,) 3/ 35HSP05 HSP (,3) 4 (5,40) 3/ 35HSP0 HSP 0.5 (,9) (,35) 3/ 35HSP07 HSP 07.5 (,9) (9,53) 3/ 35HSP08 HSP 08.5 (,9) (,70) 3/ 35HSP0 HSP 0.5 (,9) (5,88) 3/ 35HSP09 HSP 09.5 (,9) (9,05) 3/ 35HSP7 HSP 7.5 (,9) 7/8 (,) 3/ 35HSP0 HSP 0.5 (,9) (5,40) 3/ 35HSP00 HSP.09 (,3) 4 (,35) 35HSP0 HSP.09 (,3) 4 5/ (7,9) 35HSP00 HSP.09 (,3) 4 (9,53) 35HSP09 HSP 9.09 (,3) 4 7/ (,0) 35HSP003 HSP 3.09 (,3) 4 (,70) 35HSP04 HSP 4.09 (,3) 4 9/ (4,7) 35HSP09 HSP 9.09 (,3) 4 (5,88) 35HSP004 HSP 4.09 (,3) 4 (9,05) 35HSP0 HSP.09 (,3) 4 7/8 (,) 35HSP005 HSP 5.09 (,3) 4 (5,40) 35HSP03 HSP 3.09 (,3) 4 - (38,0) 35HSP035 HSP 35.5 (,9) 3/ (4,75) 35HSP00 HSP.5 (,9) (,35) 35HSP007 HSP 7.5 (,9) (9,53) 35HSP008 HSP 8.5 (,9) (,70) 35HSP00 HSP 0.5 (,9) (5,88) 35HSP009 HSP 9.5 (,9) (9,05) 35HSP07 HSP 7.5 (,9) 7/8 (,) 35HSP00 HSP 0.5 (,9) (5,40) 35HSP03 HSP 3.5 (,9) - (3,75) 35HSP0 HSP.40 (3,5) 8 (,35) 35HSP0 HSP.40 (3,5) 8 (9,53) 35HSP03 HSP 3.40 (3,5) 8 (,70) 35HSP0 HSP.40 (3,5) 8 (5,88) 35HSP04 HSP 4.40 (3,5) 8 (9,05) 35HSP08 HSP 8.40 (3,5) 8 7/8 (,) 35HSP05 HSP 5.40 (3,5) 8 (5,40) 35HSP08 HSP 08.5 (,9) (,70) 5/ 35HSP5 HSP 5.5 (,9) -/8 (8,58) 5/ 35HSP309 HSP (,74) (9,05) 35HSP07 HSP 07.5 (5,7) 7/3 (5,5) 5/ 35HSP33 HSP 33.5 (,9) -5/ (33,3) 35HSP400 HSP 4oo.95 (4,95) (,70) 80 TELEPHONE: (870) 453- / micro plastics, inc. FAX: (870)

81 TABLE F OF CONTENTS SPACES FINDEX A-Z HEX NYLON TAPPED SPACES V ITEM NUMBE DESCIPTION TAPPED L A 4HTST4 HTSP 4-5 (9,53) 3/ 4HTSP3 HTSP 3-5 9/ (4,8) 3/ 4HTSP0 HTSP * (,35) 3/ 4HTSP0 HTSP * (9,53) 3/ 4HTSP4 HTSP * (9,05) 3/ 4HTSP03 HTSP * (,70) 3/ 4HTSP HTSP 4-40* 9/ (4,7) 3/ 4HTSP9 HTSP * (5,88) 3/ 4HTSP04 HTSP * 7/ (,0) 3/ 4HTSP HTSP 4-40* 7/8 (,) 3/ 4HTSP05 HTSP * (5,40) 3/ 4HTSP0 HTSP 0-3** (,35) 3/ 4HTSP07 HTSP 07-3** (9,53) 3/ 4HTSP08 HTSP 08-3** (,70) 3/ 4HTSP0 HTSP 0-3** (5,88) 3/ 4HTSP09 HTSP 09-3** (9,05) 3/ 4HTSP7 HTSP 7-3** 7/8 (,) 3/ 4HTSP0 HTSP 0-3** (5,40) 3/ 4HTSP00 HTSP 4-40* (,35) 4HTSP0 HTSP 4-40* 5/ (7,9) 4HTSP00 HTSP 4-40* (9,53) 4HTSP09 HTSP * 7/ (,0) 4HTSP003 HTSP * (,70) 4HTSP04 HTSP * 9/ (4,7) 4HTSP09 HTSP * (5,88) 4HTSP004 HTSP * (9,05) 4HTSP0 HTSP 4-40* 7/8 (,) 4HTSP005 HTSP * (5,40) 4HTSP03 HTSP * - (38,0) 4HTSP035 HTSP 35-3** 3/ (4,75) 4HTSP00 HTSP -3** (,35) 4HTSP007 HTSP 7-3** (9,53) 4HTSP008 HTSP 8-3** (,70) 4HTSP00 HTSP 0-3** (5,88) 4HTSP009 HTSP 9-3** (9,05) 4HTSP07 HTSP 7-3** 7/8 (,) 4HTSP00 HTSP 0-3** (5,40) 4HTSP03 HTSP 3-3** - (3,75) 4HTSP0 HTSP 8-3*** (,35) 4HTSP0 HTSP 8-3*** (9,53) 4HTSP03 HTSP 3 8-3*** (,70) 4HTSP0 HTSP 8-3*** (5,88) 4HTSP04 HTSP 4 8-3*** (9,05) 4HTSP08 HTSP 8 8-3*** 7/8 (,) 4HTSP05 HTSP 5 8-3*** (5,40) 4HTSP08 HTSP 08-3** (,70) 5/ 4HTSP5 HTSP 5-3** -/8 (8,58) 5/ 4HTSP309 HTSP 309-3** (9,05) 4HTSP07 HTSP 07 7/3 (5,5) 5/ 4HTSP33 HTSP 33-3** -5/ (33,3) 4HTSP400 HTSP 400 (,70) *NOTE THESE ITEMS AE AVAILABLE IN TIC THEADS. On Threaded Spacers "and longer, tap is "from each end and not continuous through. NOTE: To order metric threads, simply add an M to the Part Number. EXAMPLE: 4HTSP0 with a -3 Thread, 4-40* Available in M3 Thread -3** Available in M3.5 Thread 8-3*** Available in M4 Thread mpsales@microplastics.com micro plastics, inc. WEBSITE: 8

82 TABLE F OF CONTENTS SPACES FINDEX A-Z V THEAD SIZE A B 3/ (4,7) 3/ (4,7) Minimum (,35) (,35) Minimum (9,53) (9,53) Minimum DEPTH OF THEAD IN " BODY LENGTHS IS 3/" MINIMUM B = 7/3 B =.00 B =.70 MALE-FEMALE NYLON THEADED STANDOFFS ITEM NUMBE DESCIPTION THEAD L 3MF05 3MF037 Standoff Standoff (,35) (9,53) 3MF050 3MF00 3MF0 3MF075 3MF087 3MF00 3MF 3MF5 3MF37 3MF50 3MF 3MF75 3MF00 Standoff Standoff Standoff Standoff Standoff Standoff Standoff Standoff Standoff Standoff Standoff Standoff Standoff (,70).00 (5,4) (5,88) (9,05) 7/8 (,) (5,40) /8 (8,58) (3,75) (34,93) (38,0) (38,8) (44,45) (50,80) 3MF05 3MF037 Standoff Standoff (,35) (9,53) 3MF050 3MF05 3MF0 3MF075 3MF087 3MF00 3MF 3MF5 3MF3 3MF37 3MF50 3MF 3MF75 3MF00 Standoff Standoff Standoff Standoff Standoff Standoff Standoff Standoff Standoff Standoff Standoff Standoff Standoff Standoff (,70) 9/ (4,7) (5,88) (9,05) 7/8 (,) (5,40) /8 (8,58) (3,75) 5/ (33,3) (34,93) (38,0) (4,8) (44,45) (50,80) 3MF05 3MF037 Standoff Standoff (,35) (9,53) 3MF050 3MF0 3MF075 3MF087 3MF00 3MF 3MF5 3MF37 3MF50 3MF 3MF75 3MF00 Standoff Standoff Standoff Standoff Standoff Standoff Standoff Standoff Standoff Standoff Standoff Standoff (,70) (5,88) (9,05) 7/8 (,) (5,40) /8 (8,58) (3,75) (34,93) (38,0) (4,8) (44,45) (50,80) 8 HIGHWAY 78 NOTH micro plastics, inc. FLIPPIN, AKANSAS 734

83 TABLE MOLDED PLASTIC DOWELS F OF CONTENTS ITEM NUMBE DESCIPTION O.D. LENGTH (,9) /8 (3,8) (,9) (,35) (,9) (9,53) (,9) (,70) (,57) /8 (3,8) (,57) (,35) (,57) (9,53) (,57) (,70) (,3) /8 (3,8) (,3) (,35) (,3) (9,53) (,3) (,70) (3,8) /8 (3,8) (3,8) 3/ (4,7) (3,8) (,35) (3,8) (9,53) (3,8) (,70) (4,75) /8 (3,8) (4,75) (,35) (4,75) (9,53) (4,75) (,70) (4,75) (9,05) (,) - (3,75) (5,33) (,70) (,35) /8 (3,8) (,35) (,35) (,35) (9,53) (,35) (,70) (,35) (9,05) (7,9) /8 (3,8) (7,9) (,35) (7,9) (9,53) (7,9) (,70) (7,9) (5,88) (7,9) (9,05) (,0) (,35) NYLON SPECIAL SNAP-IN STANDOFF SPACES FINDEX A-Z Uses include dowel pins, stop pins, insulating spacers, switch actuators, and keys. Natural color acetal plastic is standard though they may be molded of other materials. Other lengths are available. V ITEM NUMBE PANEL THICKNESS HOLE SIZE L OD ID 3SS /" (,58).87 (4,75).945 (4,0) " (,35).0 (,9) 3SS0005 /" (,58).34 (5,95) " (,35) 9/3" (7,4).53 (3,89) 3SS00037 /" (,58).34 (5,95) " (9,53) 9/3" (7,4).53 (3,89) 3SS /" (,58).34 (5,95) " (9,53) 9/3" (7,4).9 (4,9) 3SS /" (,58).34 (5,95) " (,70) 9/3" (7,4).9 (4,9) TELEPHONE (870) / 453- micro plastics, inc. FAX (870)

84 TABLE F OF CONTENTS FINDEX A-Z PANEL FASTENES AND HOLE PLUGS VI NYLON MINI IVETS Micro Plastics' Mini ivets consist of a male and female component. Mini ivets are used to fasten a variety of materials. Simply press together for fast, easy assembly. Male and female rivets are packaged and sold separately. Mini ivets are molded in natural Nylon / but are available in black upon request. PAT NUMBE DESCIPTION PANEL THICKNESS A B POST DIATE 7MM0000 7MM0000 7MM MM MM000 7MM00075 MALE MINI IVET MALE MINI IVET MALE MINI IVET MALE MINI IVET MALE MINI IVET MALE MINI IVET.00 (0,5).00 (0,5).030 (0,7).045 (,4).0 (,57).075 (,9) " (,35) " (,35) " (,35) " (,35) " (,35) " (,35).050 (,7).050 (,7).050 (,7).050 (,7).050 (,7).050 (,7).00 (,5).00 (,5).00 (,5).00 (,5).00 (,5).00 (,5) MALE MINI IVET *7MF0 FEMALE MINI IVET * FO USE WITH ALL.00 MALE IVETS " (,35).050 (,7).00 (,5) PAT NUMBE DESCIPTION PANEL THICKNESS A B POST DIATE 7MM MM MM MM0900 7MM MM MALE MINI IVET MALE MINI IVET MALE MINI IVET MALE MINI IVET MALE MINI IVET MALE MINI IVET (0,5) (0,8) (,4) (,57) (,9) (,9) " " " " " " (9,53) (9,53) (9,53) (9,53) (9,53) (9,53) (,9) (,9) (,9) (,9) (,9) (,9) (,39) (,39) (,39) (,39) (,39) (,39) FEMALE MINI IVET *7MF09 FEMALE MINI IVET * FO USE WITH ALL.090 MALE IVETS " (9,53).075 (,9).094 (,39) PAT NUMBE DESCIPTION PANEL THICKNESS A B POST DIATE 7MM503 7MM5045 7MM50 7MM5093 7MM55 7MM587 7MM535 *7MF MALE MINI IVET MALE MINI IVET MALE MINI IVET MALE MINI IVET MALE MINI IVET MALE MINI IVET MALE MINI IVET FEMALE MINI IVET (0,8) (,4) (,57) (,3) (3,8) (4,75) (8,) " (,70) " (,70) " (,70) " (,70) " (,70) " (,70) (,70) " (,70) (,54) (,54) (,54) (,54) (,54) (,54) (,54) (,54) (3,8) (3,8) (3,8) (3,8) (3,8) (3,8) (3,8) (3,8) * FO USE WITH ALL.5 MALE IVETS ADJUSTABLE MALE MINI IVET PAT NUMBE DESCIPTION COVES A ANGE FOM 7AM587 ADJUSTABLE MALE IVET /8 to 5/ * FO USE WITH \7MF FEMALE MINI IVET 84 TELEPHONE (870) / 453- micro plastics, inc. FAX (870)

85 TABLE F OF CONTENTS FINDEX A-Z PANEL FASTENES AND HOLE PLUGS VI Micro Plastic's Tubular Emblem Clips or Speed Nut Clips offer a low substitute to the expensive all metal or metal/rubber clips. These easily installed molded low density polyethylene clips eliminate paint and surface damage. The inevitable rust associated with the sharp metal parts they replace is also eliminated by the electrically insulating, non-cathodic plastic clip. TUBULA EMBLEM CLIPS ITEM NUMBE DESCIPTION A B C D E F L 0TC550 /8 X.50TUBE CLIP / TC5500 5/3 X.00 TUBE CLIP / TC5530 5/3 X.30 TUBE CLIP / TC5500 5/3 X.00 TUBE CLIP / TC55 5/3 X. TUBE CLIP / mpsales@microplastics.com micro plastics, inc. WEBSITE: 85

86 VI Q TABLE F OF CONTENTS FINDEX A-Z PANEL FASTENES AND HOLE PLUGS NYLON GOET NUTS Micro Plastics' Open Poly Grommet Nuts provide a low cost, positive connection of thin gauge materials while they eliminate cross threading. The specially designed locks snap into a prepunched square hole. As the self-threading sheet metal screw is tightened, the Poly Grommet expands and securely locks the screw and assembled parts in place. The Grommet will provide a corrosion and vibration resistant connection and can be used to insulate areas of an assembly from electrical and thermal transfer. Some of the more common sizes that we have initially tooled are shown below. Because of unique tooling approach, we can vary this design over a wide range. equest the size you need. Poly Grommets are molded in Nylon / and can be dyed or molded in various colors. Different plastic materials can be substituted. Naturally, changes in our standard product will involve additional costs. Let us know what you need. SQUAE HEAD PAT NUMBE HOLE SIZE THICKNESS ANGE SCEW HEAD SIZE "B" HEIGHT "A" LENGTH "C" 0SGN /.90 (,99/7,37).03/.5 (0,79/3,8) 8-0 (9,53).03 (0,79).30 (8,3) 0SGN /.90 (,99/7,37).03/.5 (0,79/3,8) (9,53).0 (,57).30 (8,3) 0SGN /.90 (,99/7,37).03/.5 (0,79/3,8) (9,53).5 (3,8).30 (8,3) 0SGN /.90 (,99/7,37).03/.5 (0,79/3,8) 8-0 (9,53).50 (,35).30 (8,3) 0SGN (9,53).03/.5 (0,79/3,8) (5,88) -/ (7,0) 9/3 (7,4) 0SGN /.0 (,35/,).03/.5 (0,79/,9).435 (,05).094 (,39).0 (5,59) 0SGN /.70 (,8/,8).0/.75 (,57/,99).375/.500 (9,53/,70).03 (0,79).435 (,05) 0SGN009.5/.55 (5,7/,48).03/.5 (0,79/3,8) (9,53).87 (4,75).300 (7,) 0SGN /.55 (,/,48).03/.5 (0,79/3,8) -8 (9,53) /3 (0,79) 9/3 (7,4) 0SGN /.55 (,35/,48).0/.5 (,79/3,8).375 (9,53).03 (0,79).5 (,73) 0SGN00.73/.78 (4,39/4,5).03/.078 (0,79/,98) 4.8 (5,54).50 (,35).8 (5,54) 0SGN004.50/.70 (,35/,8).0/.55 (,57/3,94).375 (9,53).03 (0,8).3 (7,9) 0SGN00.85 (7,4).078/.75 (,98/4,45) (9,5).045 (,4).340 (8,4) 0SGN000.75/.80 (,99/7,).040/.045 (,0/,4) (9,40).03 (0,8).330 (8,38) 0SGN0.350/.355 (8,89/9,0).8/.30 (5,54/5,84) (,07).0 (,57).4 (0,9) 0SGN05.370/.390 (9,40/9,9).04/.87 (,57/4,75) 0.09 (5,47).085 (,).90 (7,37) 0SGN0.305/.35 (7,7,00).03/.75 (0,79/4,44) (,94).00 (,5).300 (7,) 0SGN /.375 (9,40/9,5).03/.00 (0,79/,54).0 (5,75).080 (,03).75 (,98) 0SGN035.73/.78 (4,39/4,5).03/.078 (0,79/,98) 4.8 (5,54).050 (,7).8 (5,54) 0SGN045.70/.30 (,85/7,87).03/.70 (0,79/4,3) (0,9).0 (,57).3 (7,9) 0SGN050.30/.30 (7,87/7,87).03/.70 (0,79/4,3) 0.45 (,8).0 (,57).95 (7,49) 0SGN054.30/.30 (8,,3).03/.55 (0,79/3,94) 0.50 (,5).07 (,83).305 (7,75) 0SGN055.45/.70 (,/,85).047/.095 (,9/,4).375 (9,5).03 (0,8).40 (,07) 0SGN00.335/.340 (8,5/8,4).0/.5 (,58/3,7) 8.5 (,9).075 (,90).35 (8,00) 0SGN05.70/.70 (,8/,8).0/.5 (,58/3,7).390 (9,90).050 (,7).75 (,99) 0SGN070.75/.85 (,90/7,4).03/.5 (0,79/3,7) (9,53).050 (,7).8 (5,54) 0SGN07.00/.70 (5,08/,8).03/.5 (0,8/3,9).3/.437 (7,93/,).035 (0,89).3 (7,93) 0SGN075.75/.80 (,99/7,).0/.0 (,0/3,05).390 (9,90).055 (,40).8 (7,4) 0SGN07.0/.70 (,/,8).093/.87 (,3/4,75).40 (0,4).040 (,0).30 (7,87) 0SGN (,99).047/.80 (,9/4,57) (9,53).03 (0,8).37 (8,3) 0SGN /.445 (9,40)/(,30).0/.0 (,9/4,57) (5,88).080 (,04) 9/3 (7,4) 0SGN /.375 (9,40/9,50).0/.0 (,0/3,05).5 (5,90).080 (,04).8 (7,4) 0SGN08.40/.40 (0,4/0,4).03/.0 (0,79/,58).30 (,00).40 (3,5).80 (7,) 0SGN085.30/.335 (8,08/8,5).03/.34 (0,8/5,94) (,94).055 (,40).40 (0,7) 0SGN /.345 (8,,7).0/.7 (,58/4,35) 0.48 (,88).095 (,4).400 (0,) 0SGN /.35 (8,38/9,8).03/.095 (0,8,4) (,70).094 (,39).95 (7,50) 0SGN000.50/.0 (,35/,).0/.5 (,58/3,8).375 (9,53).40 (3,5).5 (,73) 8 TELEPHONE (870) / 453- micro plastics, inc. FAX (870)

87 TABLE F OF CONTENTS FINDEX A-Z PANEL FASTENES AND HOLE PLUGS VI DOUBLE SPLIT SQUAE HEAD PAT NUMBE HOLE SIZE THICKNESS ANGE SCEW HEAD SIZE "B" HEIGHT "A" LENGTH "C" 0SGN /.38 (9,58/9,70).5/.30 (3,8/3,30) 0 39/4 (5,48).08 (,08).308 (7,8) 0SGN005.8/.33 (5,79/5,9).50/.7 (,35/,88) (9,53).03 (0,79).40 (0,3) 0SGN008.30/.35 (7,87/8,00).0/.5 (,79/,9) (,0).078 (,98).8 (7,4) 0SGN /.30 (7,75/7,87).5/.35 (3,8/3,43) (,0).0 (,57).8 (7,4) 0SGN00.375/.390 (9,53/9,9).30 (5,48) (5,88).080 (,03).438 (,3) 0SGN005.50/.50 (,35/,35).093/.75 (0,9/,99) (9,53).047 (,9).40 (0,7) 0SGN08.330/.330 (8,38/8,38).03/.5 (0,79/3,8) (,83).03 (0,8).75 (,98) 0SGN (7,70).03/.45 (0,79/3,8) (,05).0 (,57).70 (,8) OUND HEAD PAT NUMBE HOLE SIZE THICKNESS ANGE SCEW HEAD SIZE "B" HEIGHT "A" LENGTH "C" 0SGN /.80 (,8/7,).0/.5 (,57/4,9).375 (9,53).093 (,3).97 (7,54) 0SGN /.90 (,99/7,37).03/.5 (0,79/3,8) (,70).03 (0,79).30 (8,3) 0SGN000.7/.90 (,88/7,37).03/.5 (0,79/3,8) (,70).0 (,57).30 (8,3) 0SGN000.7/.90 (,88/7,37).03/.5 (0,79/3,8) (,70).5 (3,8).30 (8,3) 0SGN /.90 (,99/7,37).03/.5 (0,79/3,8) (,70).50 (,35).30 (8,3) 0SGN /.90 (,99/7,37).03/.5 (0,79/3,9) (,70).375 (9,53).30 (8,3) 0SGN /.90 (,99/7,37).03/.5 (0,79/3,9) (,70).708 (7,98).35 (8,00) 0SGN /.85 (7,/7,4).03/.50 (0,8/3,8) (,70) 3/3 (8,) /3 (8,73) 0SGN /.90 (,99/7,37).03/.5 (0,79/3,9) (,0).03 (0,8).35 (8,) 0SGN /.90 (,99/7,37).03/.09 (0,79/,77) (3,89).0 (,97).8 (7,4) 0SGN0090.8/.8 (7,4/7,).03/.09 (0,79/,77) (,50).93 (7,0).8 (7,4) 0SGN0.350/.355 (8,89/9,7).03/.5 (0,8/3,85).53 (3,3).5 (3,8).8 (7,4) 0SGN040.30/.30 (7,87/7,87).03/.0 (0,79/4,0) (,70).035 (0,89).9 (7,4) 0SGN000.45/.49 (0,80/0,90).03/.0 (0,79/,79) 5/.740 (8,80).90 (4,83).3 (7,9) 0SGN /4.30 (0,54/0,9).03/.35 (0,8/3,43).750 (9,05).0 (,57).30 (7,87) 0SGN /.330 (8,/8,38).03/.5 (0,79/3,9) 0.55 (4,35).0 (,57).30 (8,3) 0SGN (,99).0/.70 (,57/4,3) (,57).3 (7,9).35 (8,) THEE LEGGED SQUAE HEAD (Fits ound Hole) PAT NUMBE HOLE SIZE THICKNESS ANGE SCEW HEAD SIZE "B" HEIGHT "A" LENGTH "C" 0SGN /.300 (7,/7,).03/.35 (0,78/3,43).485 (,3).055 (,40).5 (,73) CLOSED PAT NUMBE HOLE SIZE THICKNESS ANGE SCEW HEAD SIZE "B" HEIGHT "A" LENGTH "C" 0SGN00** 0SGN040*.5/ /.355 (,73/7,) (9,0/9,0).075/.45.0/.350 (9,0/3,8) (,57/8,8) (,5) (7,78) (,44) (,7) (,43) (7,40) *OUND HEAD **SQUAE HEAD mpsales@microplastics.com micro plastics, inc. WEBSITE: 87

88 TABLE F OF CONTENTS FINDEX A-Z PANEL FASTENES AND HOLE PLUGS VI Micro Plastics' Poly Grommets provide a low cost, positive connection for thin gauge materials while they eliminate the chance of cross-threading. The specially designed closed Poly Grommet snaps into a pre-punched square hole. As the self-threading sheet metal screw is tightened, the Poly Grommet expands and securely locks the screw and assembled parts in place. The metal screw is encapsulated by the Grommet, insulating it from electrical wiring and tubing while it guards against thermal and moisture transfer. The sizes shown were tooled initially for some of the more common applications. Micro Plastics, because of our unique tooling approach, can vary these designs over a very wide range. equest the size you need. We are very flexible. Poly Grommets can be dyed or molded in various colors. Different plastic materials can be substituted. Naturally, changes from our standard product will incur additional cost. Let us know what you need. NYLON CLOSED SCEW STANDAD GOET NUTS PAT NUMBE HOLE SIZE PANEL THICKNESS ANGE SCEW SIZE HEAD SIZE "B" HEIGHT "A" LENGTH "C" (+/-.05) 0SGC SGC SGC SGC SGC SGC SGC SGC SGC / NYLON CLOSED SCEW SPACE GOET NUTS PAT NUMBE SPACE LENGTH SPACE OD HOLE SIZE PANEL THICKNESS ANGE SCEW SIZE LOCK LENGTH "C" (+/-.05) 0SPG " SPG " SPG " SPG " SPG " SPG " NYLON "SPECIAL ITEM "GOET NUTS PAT HOLE PANEL THK. SCEW HEAD HEAD LOCK NUMBE SIZE ANGE SIZE SIZE "B" HEIGHT "A" LENGTH "C" / / PAT NUMBE PAT NUMBE PAT NUMBE C 88 TELEPHONE (870) / 453- micro plastics, inc. FAX (870)

89 TABLE F OF CONTENTS FINDEX A-Z PANEL FASTENES AND HOLE PLUGS NYLON SPIN CLIPS - This design combines the advantages of a push-in type fastener with a screw. For fast assembly, the part can be pushed into a threaded hole, and then screwed in for a tighter fit, or screwed out for disassembly. VI This part will also function as a standard Fin Clip for use in a unthreaded hole with a diameter of approximately 3/4" PAT NUMBE DESCIPTION 7SC50H037 X " 7SC50H050 X " 7SC50H0 X " 7SC50H075 X " 7SC50H00 X " Slotted HEX Head PAT NUMBE DESCIPTION 7SC50K037 X " 7SC50K050 X " 7SC50K0 X " 7SC50K075 X " 7SC50K00 X " Unslotted KNULED Head PAT NUMBE DESCIPTION 7SC50037 X " 7SC50050 X " 7SC500 X " 7SC50075 X " 7SC5000 X " Slotted OUND Head.450 DIA PAT NUMBE DESCIPTION 7SC50P037 X " 7SC50P050 X " 7SC50P0 X " 7SC50P075 X " 7SC50P00 X " Slotted PAN Head.475 DIA NYLON "SPECIAL ITEM "GOET NUTS PAT NUMBE PAT NUMBE PAT NUMBE PAT NUMBE PAT NUMBE PAT NUMBE mpsales@microplastics.com micro plastics, inc. WEBSITE: 89

90 TABLE F OF CONTENTS FINDEX A-Z PANEL FASTENES AND HOLE PLUGS VI Micro Plastics' Push-in Fasteners provide an inexpensive, fast, convenient method to join plastic, light sheet metal, insulating materials, circuit boards, or any other thin, light-weight material. They can also be used as push-in glides or as bumpers. Special designed legs provide compression and expansion to lock fastener into pre-punched holes. These fasteners are vibration, abrasion and corrosion resistant, and feature large heads for easier assembly, and can be used over and over. NYLON PUSH-IN-FASTENES PAT NUMBE DESC. H A B C D L 7PIF003 PIF 3 3/ (9,53).533 (3,54).087 (,).30 (3,30).095 (,4).75 (7,5) 7PIF004 PIF 4.48 (,30).83 (0,5).40 (3,5).44 (3,).0 (,79).07 (5,83) 7PIF005 PIF 5 /4 (8,33).030 (0,7).30 (3,30). (4,).5 (3,8).00 (5,08) 7PIF007 PIF 7 /3 (8,73).30 (3,30).0 (,80).00 (5,08).0 (4,0).70 (,8) 7PIF008 PIF 8 3/4 (5,).30 (5,84).098 (,49).5 (3,9).8 (3,5).370 (9,40) 7PIF009 PIF 9 (,35).445 (,30).085 (,).45 (3,8).095 (,4).590 (4,99) 7PIF000 PIF 0 5/4 (5,95).080 (,03).080 (,03).80 (4,57).4 (3,5).00 (5,08) 7PIF00 PIF.8 (4,7).00 (5,08).05 (,5).04 (,4).080 (,03).97 (7,54) 7PIF00 PIF (,70).04 (,3).85 (4,70).80 (7,).43 (,7).370 (9,40) 7PIF003 PIF 3 3/ (4,75).075 (,9).00 (,5).50 (3,8).0 (3,05).90 (4,83) 7PIF004 PIF 4 9/3 (5,08).35 (9,7).87 (4,75).95 (7,49).45 (,).85 (7,40) 7PIF005 PIF 5 5/4 (5,95).00 (5,5).08 (,08).4 (4,7).4 (3,5).3 (8,70) 7PIF00 PIF 5/4 (5,95).080 (,03).070 (,78).80 (4,57).4 (3,5).05 (5,) 7PIF007 PIF 7 (9,5).0 (,97).77 (4,50).0 (5,3).5 (4,9).303 (8,3) 7PIF008 PIF 8 /3 (8,73).875 (,3).74 (4,4).4 (5,9).75 (4,45).5 (8,3) 7PIF009 PIF 9 3/4 (5,).0 (5,33).09 (,3).79 (4,55).30 (3,30).34 (8,9) 7PIF003 PIF 3 5/4 (9,93).503 (,78).0 (5,33).95 (7,49).30 (5,84).083 (7,5) 7PIF003 PIF 3 3/4 (5,).35 (5,97).0 (,8).45 (3,8).5 (,9).34 (8,) 7PIF0033 PIF 33 (9,5).505 (,83).30 (3,30).00 (5,08).30 (3,30).705 (7,9) 7PIF0034 PIF 34 (9,05).3 (,5).80 (4,57).0 (5,59).80 (4,57).875 (,3) 7PIF0035 PIF 35 5/ (7,94).5 (3,8).070 (,78).0 (,80).089 (,).35 (5,9) 7PIF003 PIF 3 3/ (4,75).0 (,8).075 (,9).00 (,54).090 (,9).79 (4,55) 7PIF0037 PIF 37 (9,5).3 (,5).80 (4,57).0 (5,59).80 (4,57).875 (,) 7PIF0038* PIF 38* 9/3 (7,4).03 (,0).078 (,98).00 (,54).093 (,3).5 (4,9) 7PIF0039 PIF 39 (,35).5 (,9).085 (,).45 (3,8).093 (,3).40 (,0) 7PIF0040* PIF 40* 9/3 (7,4).093 (,3).078 (,98).05 (,7).093 (,3).00 (5,08) 7PIF004* PIF 4* 5/ (7,94). (3,07).085 (,).45 (3,8).089 (,).4 (,5) 7PIF004 PIF 4 3/4 (5,).90 (4,83).090 (,9).80 (4,57).30 (3,30).30 (8,3) 7PIF0043 PIF 43 3/4 (5,).5 (3,9).35 (3,43).40 (3,5).5 (,9).30 (8,3) 7PIF0044 PIF 44 3/4 (5,).35 (3,43).35 (3,43).40 (3,5).5 (,9).95 (7,49) 7PIF0045 PIF 45 3/4 (5,).35 (5,97).070 (,79).37 (3,48).5 (,9).345 (8,7) 7PIF004 PIF 4 3/4 (5,).50 (,35).0 (,9).45 (3,8).5 (,9).395 (0,03) 7PIF0047 PIF 47 3/4 (5,). (3,07).05 (,7).45 (3,8).5 (,9).0 (,0) 7PIF0048 PIF 48 5/4 (9,93).35 (8,00).3 (,87).08 (5,8).57 (3,99).488 (,40) 7PIF0049 PIF 49 /3 (8,73).450 (,43).0 (4,0).00 (5,08).0 (4,0).80 (7,7) 7PIF0050 PIF 50 /3 (8,73).5 (3,8).37 (3,48).0 (5,3).5 (4,9).305 (7,75) 7PIF005 PIF 5 /3 (8,73).05 (,5).37 (3,48).0 (5,3).5 (4,9).35 (8,) 7PIF005 PIF 5 /3 (8,73).55 (4,).53 (3,89).5 (5,7).80 (4,57).780 (9,8) 7PIF0053 PIF 53 /3 (8,73).4 (,5).74 (4,4).4 (5,9).75 (4,45).490 (,45) 7PIF0054 PIF 54 /3 (8,73).97 (5,00).85 (4,70).95 (7,49).55 (,48).45 (0,54) 7PIF0055 PIF 55 /3 (8,73).555 (4,08).45 (3,8).5 (5,7).80 (4,57).770 (9,5) 7PIF005 PIF 5 9/4 (3,5).35 (8,00).075 (,9).35 (3,43).095 (,4).450 (,43) 7PIF0057 PIF 57 7/ (,0).0 (3,05).55 (,48).380 (9,5).305 (7,74).445 (,43) 7PIF0058 PIF 58 5/3 (,90). (3,07).53 (3,8).38 (,05).00 (5,08).34 (8,4) 7PIF0059 PIF 59 3/ (4,75).45 (3,9).05 (,5).05 (,).090 (,9).55 (,48) 7PIF000 PIF 0 5/3 (,90).5 (3,89).5 (3,8).8 (5,79).00 (5,05).333 (8,4) 7PIF00 PIF /3 (8,73).370 (9,40).05 (,7).3 (5,99).03 (5,).540 (3,7) 7PIF00 PIF 5/4 (9,93).730 (43,94).0 (5,33).95 (7,49).30 (5,84).00 (5,05) 7PIF003 PIF 3 9/4 (,5).7 (7,0).4 (3,).95 (7,49).40 (,0).40 (,8) 7PIF004 PIF 4 9/4 (,5).300 (7,).70 (4,3).95 (7,49).40 (,0).535 (3,59) 7PIF005 PIF 5 9/3 (5,08).480 (,9).87 (4,75).93 (7,44).45 (,).70 (8,9) 7PIF00 PIF 9/4 (,5).330 (8,38).5 (4,9).95 (7,49).40 (,0).555 (4,0) * SLOT IS MISSING ON PIF 40 AND PIF 4 "L" DINSION (total length) = +/-.05". 90 TELEPHONE (870) / 453- micro plastics, inc. FAX (870)

91 TABLE F OF CONTENTS FINDEX A-Z PANEL FASTENES AND HOLE PLUGS NYLON PUSH-IN-FASTENES PAT NUMBE DESC. H A B C D L 7PIF007 PIF 7 (,70).7 (4,34).87 (4,75).95 (7,49).0 (,0).405 (0,9) 7PIF008 PIF 8 / (7,45).40 (3,5).55 (,48).30 (9,4).90 (7,37).48 (,89) 7PIF009* PIF 9.3 (7,9).095 (,4).075 (,9).45 (3,8).095 (,4).8 (5,54) 7PIF0070 PIF 70 9/3 (5,08).7 (4,34).87 (4,75).95 (7,49).0 (,0).48 (0,) 7PIF007 PIF 7 9/3 (5,08).50 (,35).87 (4,75).300 (7,).45 (,).497 (,) 7PIF007 PIF 7 9/3 (5,08).35 (9,7).87 (4,75).90 (7,37).45 (,). (5,80) 7PIF0073 PIF 73 /3 (8,73).7 (4,34).87 (4,75).95 (7,49).0 (,0).380 (9,5) 7PIF0074 PIF 74 9/3 (5,08).405 (0,9).0 (4,0).35 (8,00).75 (,99).0 (5,75) 7PIF0075 PIF 75 (,35).550 (3,97).35 (3,43).45 (3,8). (,84).745 (8,9) 7PIF007 PIF 7 5/3 (,90).9 (3,8).48 (3,7).38 (,05).97 (5,00).399 (0,3) 7PIF0077 PIF 77 5/4 (5,95).30 (8,3).084 (,3).45 (3,8).8 (3,00).437 (,0) 7PIF0078 PIF 78 3/3 (0,3).50 (,35).00 (,54).78 (7,0).7 (5,5).395 (0,03) 7PIF0079 PIF 79 9/ (4,9).950 (4,3).74 (4,4).8 (5,79).7 (4,37).0 (30,48) 7PIF0080 PIF 80 (9,53).58 (5,8).7 (4,3).0 (5,3).5 (4,9).35 (34,7) 7PIF008 PIF (8,7).5 (3,8).37 (3,48).0 (5,3).5 (4,9).3 (7,87) 7PIF008 PIF 8 / (7,45).50 (,35).55 (,48).30 (9,4).90 (7,37).585 (4,8) 7PIF0083 PIF 83 (,70).04 (,3).38 (3,5).80 (7,).43 (,7). (,5) 7PIF0084 PIF 84 (,70).099 (,5).8 (4,7).80 (7,).45 (,).34 (8,3) 7PIF0085 PIF 85 (,70).7 (3,3).77 (4,50).8 (7,4).4 (,).3 (9,7) 7PIF008 PIF 8 (,70).5 (3,9).70 (4,3).8 (7,4).4 (,5).380 (9,5) 7PIF0087 PIF 87 (,70).89 (4,80).5 (3,84).78 (7,0).4 (,).395 (0,03) 7PIF0088 PIF 88 (,70).9 (5,5).78 (4,5).77 (7,04).39 (,07).445 (,30) 7PIF0089 PIF 89 (,70).50 (,35).75 (4,45).83 (7,9).4 (,).487 (,37) 7PIF0090 PIF 90 (,70).8 (7,4).7 (4,47).80 (7,).40 (,0).53 (3,03) 7PIF009 PIF 9 (,70).34 (7,98).5 (3,8).8 (7,4).4 (,).50 (3,) 7PIF009 PIF 9 (,70).345 (8,7).77 (4,50).8 (7,4).40 (,0).578 (4,8) 7PIF0093 PIF 93 (,70).375 (9,53).75 (4,45).8 (7,4).4 (,5).09 (5,47) 7PIF0094 PIF 94 (,70).405 (0,9).75 (4,45).8 (7,).43 (,7).38 (,) 7PIF0095 PIF 95 9/3 (5,08).30 (3,30).5 (3,8).05 (5,).45 (3,8).305 (7,75) 7PIF009 PIF 9 (,70).4 (,84).78 (4,5).80 (7,).40 (,0).70 (7,8) 7PIF0097 PIF 97 (,70).498 (,5).7 (4,47).80 (7,).40 (,0).734 (8,4) 7PIF0098 PIF 98 (,70).438 (,3).7 (4,47).8 (7,4).40 (,0).7 (7,07) 7PIF0099 PIF 99 (,70).00 (5,9).380 (9,5).475 (,07).350 (8,89).40 (37,08) 7PIF000 PIF 00 (9,53).543 (39,9).05 (5,).95 (7,49).50 (,35).875 (47,3) 7PIF00 PIF 0.80 (7,8).54 (3,9).55 (,48).347 (8,8).85 (7,4).473 (,0) 7PIF00 PIF (7,).050 (,7).37 (3,48).0 (5,3).5 (4,9).337 (8,5) 7PIF004 PIF 04 5/4 (0,3).750 (9,05).08 (,08).4 (4,7).0 (3,05).875 (,3) 7PIF005 PIF 05 (5,88).05 (7,05).30 (9,4).30 (9,4).70 (,8).50 (38,0) 7PIF00 PIF (9,5).340 (8,4).80 (4,57).0 (5,59).80 (4,57).580 (4,73) VI Micro Plastics' Push-in Fasteners provide an inexpensive, fast, convenient method to join plastic, light sheet metal, insulating materials, circuit boards, or any other thin, light-weight material. They can also be used as push-in glides or as bumpers. Special designed legs provide compression and expansion to lock fastener into pre-punched holes. These fasteners are vibration, abrasion and corrosion resistant, and feature large heads for easier assembly, and can be used over and over. NYLON "SPECIAL ITEM" PUSH-IN-FASTENES PAT NUMBE mpsales@microplastics.com micro plastics, inc. WEBSITE: 9

92 TABLE F OF CONTENTS FINDEX A-Z PANEL FASTENES AND HOLE PLUGS VI Micro Plastics' Arrow Clips are reusable, molded nylon fasteners that feature an inexpensive fast method to hand assemble metal, wood, plastic, composition or other thin-gauge materials. The specially designed body compresses as it is forced through a prepunched hole and springs back to its original shape to lock the assembled parts securely. The versatile clips can be disassembled and reused again and again. They provide an economical, electrical insulating, vibration, abrasion, and corrosion resistant connection. The following are some of the more common sizes. Because of Micro Plastics' unique tooling approach, designs can be varied over a wide range. equest the size you need. NYLON AOW CLIPS PNEUMATIC POWE TOOLS AE AVAILABLE FO VOLU USES. PAT NUMBE DESC. HOLE SIZE PANEL THICKNESS ANGE HEAD DIA. D HEAD HEIGHT A LENGTH B CLIP DIA. C 7AC000 AC.8/.9 (4,/4,88).0/.5 (,57/3,8).30 (9,4).00 (,5).400 (0,).5 (5,7) 7AC000 AC.3/.35 (3,33/3,43).0/.5 (,57/3,8).70 (,8).00 (,5).395 (0,03).0 (4,0) 7AC0003 AC 3.5/. (3,84/4,09).0/.5 (,57/3,8).80 (7,).040 (,0).390 (9,9).9 (4,98) 7AC0004 AC 4.5/. (3,84/4,09).0/.45 (,57/3,8).80 (7,).080 (,03).400 (0,).80 (4,57) 7AC0005 AC 5.3/.3 (5,4/5,).5/.87 (3,8/4,75).370 (9,40).00 (,5).540 (3,7).48 (,30) 7AC000 AC.8/.9 (4,/4,88).30/.330 (7,87/8,38).370 (9,40).00 (,5).540 (3,7).5 (5,7) 7AC0007 AC 7.3/.3 (5,4/5,).0/.5 (,57/3,8).370 (9,40).00 (,5).450 (,43).5 (5,7) 7AC0009 AC 9.50/.0 (,39/,0).5/.87 (3,8/4,75).484 (,9).00 (,5).575 (4,).90 (7,37) 7AC000 AC 0.0/.05 (,57/,5).00/.03 (0,5/0,79).00 (,54).00 (0,5).5 (3,8).08 (,73) 7AC00 AC.8/.9 (4,/4,88).5/.85 (4,9/4,70).375 (9,53).00 (,5).55 (3,33).0 (5,3) 7AC00 AC.95/.00 (4,95/5,08).035/.05 (0,89/,5).370 (9,40).00 (,5).350 (8,89).5 (5,7) 7AC003 AC 3.30/.3 (3,30/3,35).5/.40 (3,8/3,5).70 (,8).070 (,78).30 (7,87). (4,) 7AC004 AC 4.45/.50 (3,8/3,7).90/.300 (7,37/7,).70 (,8).070 (,78).530 (3,4).9 (4,98) 7AC005 AC 5.8/. (3,00/3,0).0/.5 (,57/3,8).80 (7,).00 (,5).390 (9,9).50 (3,7) 7AC00 7AC007 AC AC 7.50/.0 (,35/,0).30/.335 (8,38/8,50).30/.380 (9,4/9,5).0/.340 (,57/8,3).5 (5,).83 (7,35).05 (,5).070 (,78).80 (0,57).900 (,8).8 (7,).375 (9,5) 7AC008 AC 8.0/.5 (4,0/4,9).03/.5 (0,8/3,8).80 (7,).080 (,03).400 (0,).8 (4,7) 7AC009 AC 9.330/.340 (8,38/8,4).5/.350 (3,8/8,88).85 (7,45).070 (0,75).895 (,74).375 (9,53) 7AC000 AC 0.0/.35 (3,0/3,43).0/.5 (,58/3,8).70 (,8).040 (,0).330 (8,38).40 (3,5) 7AC00 AC.50/.0 (,35/,57).5/.50 (3,8/,35).500 (,70).050 (,7).30 (,0).80 (7,) 7AC00 AC.085/.090 (,/,9).03/.07 (0,8,7).5 (3,8).030 (0,7).87 (4,75).07 (,7) 7AC003 7AC004 AC 3 AC 4.335/.345 (8,,7).50/.0 (,5/,0).0/.40 (,57/3,5).500/.750 (,7/9,).8 (,00).0 (5,49).050 (,7).08 (,73).458 (,3).35 (8,83).33 (9,).87 (7,9) 9 TELEPHONE (870) / 453- micro plastics, inc. FAX (870)

93 TABLE F OF CONTENTS FINDEX A-Z PANEL FASTENES AND HOLE PLUGS VI Micro Plastics' Special Item Arrow Clips are designed to provide unique fasteners for assembly applications where larger panel thicknesses and or mounting diameters combined with increased fastening strength is required. Molded from UL 94V- Nylon for corrosion, abrasion and vibration resistance. NYLON "SPECIAL ITEM" AOW CLIPS PAT NUMBE 4000 PAT NUMBE 4000 PAT NUMBE 400 PAT NUMBE 4004 PAT NUMBE 4005 PAT NUMBE mpsales@microplastics.com micro plastics, inc. WEBSITE: 93

94 TABLE F OF CONTENTS FINDEX A-Z PANEL FASTENES AND HOLE PLUGS VI Micro Plastics' achet Fasteners are designed to provide and economical fastening method over a wide range of panel thicknesses and materials. The easy hand installation assures a quick assembly and a strong and reliable finished product. Parts are molded in Black Nylon / ACHET FASTENES PAT NUMBE HOLE SIZE PANEL THK. ANGE HEADSTYLE HEAD SIZE "B" HEAD HEIGHT "A" LOCK LENGTH "C" 7T (4,75).05/.35 (0,4/9,7) A.375 (9,53).070 (,78).500 (,70) 7T (4,75).030/.330 (0,7/8,38) B.435 (,05).08 (,73).5 (4,7) *7T87700PPB.87 (4,75).5/.450 (3,8/,43) C.300 (7,).05 (,5).700 (7,78) 7T50.50 (,35).05/.300 (,7/7,) A.700 (7,78).00 (,54).437 (,0) 7T (,35).50/.535 (3,8/3,5) A.700 (7,78).07 (,7).783 (8,88) 7T (7,3).093/.500 (,3/,70) A.5 (5,87).0 (,79).890 (,) * PAT MOLDED IN BLACK POLYPOPYLENE * HEAD WILL HAVE A TEXTUED FINISH Designed for other hole sizes from /8 to and panel thicknesses from /3 to 3/. SNAP CLIPS A combination of Celcon Acetal material, and a resilient body design, give these parts a positive snap and more definate grip when assembled into place. PAT NUMBE A B D HOLE SIZE PANEL THICKNESS 7SNC (,5) (,35) (,35).5 (3,8).03 (0,8) 7SNC (,5) 9/3 (7,4) (,35).5 (3,8).0 (,57) 7SNC (,5) 5/ (7,94) (,35).5 (3,8).093 (,3) 7SNC (,5) /3 (8,73) (,35).5 (3,8).5 (3.8) 7SNC (,5) 9/3 (7,4) 5/ (7,94).5 (3,9).03 (0,8) 7SNC (,5) 5/ (7,94) 5/ (7,94).5 (3,9).0 (,57) 7SNC (,5) /3 (8,73) 5/ (7,94).5 (3,9).093 (,3) 7SNC (,5) (9,53) 5/ (7,94).5 (3,9).5 (3,8) 7SNC (,5) 3/3 (0,3) 5/ (7,94).5 (3,9).5 (3,9) 7SNC (,5) 5/ (7,94) 5/ (7,94).87 (4,75).03 (0,8) 7SNC (,5) /3 (8,73) 5/ (7,94).87 (4,75).0 (,57) 7SNC (,5) (9,53) 5/ (7,94).87 (4,75).093 (,3) 7SNC (,5) 3/3 (0,3) 5/ (7,94).87 (4,75).5 (3,8) 7SNC (,5) 7/ (,) 5/ (7,94).87 (4,75).5 (3,9) 7SNC (,5) 5/3 (,9) 5/ (7,94).87 (4,75).87 (4,75) 7SNC (,5) 5/4 (9,93) /3 (8,73).9 (5,5).03 (0,8) 7SNC (,5) 7/4 (0,7) /3 (8,73).9 (5,5).0 (,57) 7SNC (,5) 9/4 (,5) /3 (8,73).9 (5,5).093 (,3) 7SNC (,5) 3/4 (,30) /3 (8,73).9 (5,5).5 (3,8) 7SNC (,5) 33/4 (3,) /3 (8,73).9 (5,5).5 (3,9) 7SNC (,5) 35/4 (3,89) /3 (8,73).9 (5,5).87 (4,75) 7SNC (,5) 3/3 (0,3) (,70).50 (,35).03 (0,8) 7SNC (,5) 7/4 (0,7) (,70).50 (,35).0 (,57) 7SNC (,5) 9/4 (,5) (,70).50 (,35).093 (,3) 7SNC (,5) 3/4 (,30) (,70).50 (,35).5 (3,8) 7SNC (,5) 33/4 (3,) (,70).50 (,35).5 (3,9) 7SNC (,5) 35/4 (3,89) (,70).50 (,35).87 (4,75) 94 TELEPHONE (870) / 453- micro plastics, inc. FAX (870)

95 TABLE F OF CONTENTS FINDEX A-Z PANEL FASTENES AND HOLE PLUGS VI NYLON KEY-HOLE CLIPS PAT NUMBE "H" HEAD DIATE HOLE SIZE PANEL THICKNESS 7KY KY505 7KY505 7KY5087 7KY509 7KY5050 7KY KY505 7KY505 7KY5087 7KY508 7KY5050 7KY508 7KY503 7KY KY KY KY8705 7KY8705 7KY KY8709 7KY87050 " " " " " " 5/" 5/" 5/" 5/" 5/" 5/" 5/" 5/" 5/" 5/" 5/" 5/" 5/" 5/" 5/" 5/" (,35) (,35) (,35) (,35) (,35) (,35) (7,94) (7,94) (7,94) (7,94) (7,94) (7,94) (7,94) (7,94) (7,94) (7,94) (7,94) (7,94) (7,94) (7,94) (7,94) (7,94) (3,8) (3,8) (3,8) (3,8) (3,8) (3,8) (3,9) (3,9) (3,9) (3,9) (3,9) (3,9) (3,9) (3,9) (3,9) (3,9) (4,75) (4,75) (4,75) (4,75) (4,75) (4,75) (,3) (3,8) (3,9) (4,78) (5,5) (,35) (,3) (3,8) (3,9) (4,75) (5,54) (,35) (7,4) (7,9) (8,7) (9,53) (,3) (3,8) (3,9) (4,75) (5,5) (,35) 7KY /3" (,89).87 (4,75).50 (,35) 7KY8708 7KY8703 7KY KY /" 5/" 5/" 5/" (7,94) (7,94) (7,94) (7,94) (4,75) (4,75) (4,75) (4,75) (7,4) (7,9) (8,74) (9,53) 7KY KY905 7KY905 7KY9087 7KY909 7KY9050 7KY908 7KY903 /3" (8,73) /3" (8,73) /3" (8,73) /3" (8,73) /3" (8,73) /3" (8,73) /3" (8,73) /3" (8,73) (5,5) (5,5) (5,5) (5,5) (5,5) (5,5) (5,5) (5,5) (,3) (3,8) (3,9) (4,78) (5,5) (,35) (7,4) (7,9) 7KY KY5005 7KY5005 7KY KY5009 7KY KY5008 7KY5003 7KY KY KY KY KY KY " " " " " " " " " " " " " " (,70) (,70) (,70) (,70) (,70) (,70) (,70) (,70) (,70) (,70) (,70) (,70) (,70) (,70) (,35) (,35) (,35) (,35) (,35) (,35) (,35) (,35) (,35) (,35) (,35) (,35) (,35) (,35) (,3) (3,8) (3,9) (4,75) (5,5) (,35) (7,4) (7,9) (8,7) (9,53) (0,3) (,0) (,89) (,70) This panel fastener incorporates a new design. The key-hole shaped interior allows the part to collapse more completely for easy assembly with finger pressure. Tapered, bullet-style point slides into hole easily. Angled panel lock section takes up slack in panels to provide for a tight assembly. The design allows for a relatively large clip diameter to hole size ratio, resulting in higher retention force. Parts can be tooled for a large variety of hole and panel variations. mpsales@microplastics.com micro plastics, inc. WEBSITE: 95

96 TABLE F OF CONTENTS FINDEX A-Z PANEL FASTENES AND HOLE PLUGS VI Micro Plastics' Poly ivets are one-piece nylon blind rivets that offer a fast economical, permanent, fastener that can be used in a wide variety of materials including sheet metal, plastic sheets, fiberglass, P.C. boards and composites. Fast, easy installation can be made without tools from one side of the work piece. The rivet is inserted in a pre-punched hole and the drive pin is forced into the specially designed legs, with a drive rivet tool, which expand and securely locks the assembled components in place. The versatile Poly ivet provides a secure joint even under extreme vibration conditions while it electrically insulates and resists corrosion and cathodic transfer.the following are some of the more common sizes available. Because of Micro Plastics' unique tooling approach, designs can be varied over a wide range: diameter, head style and lengths can be adjusted to meet your requirements. Let us know what you need. NYLON POLY DIVE IVETS PAT NUMBE NOMINAL HOLE PANEL THICKNESS ANGE HEAD STYLE HEAD DIA. "A" HEAD HEIGHT "B" LOCK LENGTH "C" PIN DIA. "D" P (5,54).093/.350 (,3/9,53) ound.375 (9,53).080 (,03).450 (,43).0 (3,05) P (3,9).87/.50 (4,75/,35) Binder.8 (5,54).050 (,7).3 (7,9).093 (,3) P (5,54).094/.3 (,39/7,9) Binder.437 (,0).00 (,54).44 (,79).5 (3,8) P (3,9).8/.3 (5,54/7,9) Binder.8 (5,54).050 (,7).359 (9,).093 (,3) P (4,75).0/.87 (,57/4,75) Truss.8 (7,4).050 (,7).9 (7,5).5 (3,8) P (3,9).8/.383 (5,54/9,73) Binder.8 (5,54).050 (,7).4 (0,9).093 (,3) P (4,75).5/.8 (3,9/7,4) Truss.430 (0,9).075 (,9).380 (9,5).5 (3,8) P (4,75).0/.5 (,57/3,8) Binder.430 (0,9).0 (3,05).8 (5,54).5 (3,8) P (4,75).5/.87 (3,8/4,75) Truss.430 (0,9).075 (,9).8 (7,4).5 (3,8) P (4,75).0/.87 (,57/4,75) Truss.430 (0,9).075 (,9).85 (7,4).5 (3,8) P (4,75).03/.00 (0,79/5,08) ound.75 (,98).075 (,9).95 (7,49).5 (3,8) P (4,75).3/. (7,9/,8) Binder.8 (7,4).075 (,9).535 (3,59).5 (3,8) P (4,75).0/.87 (,57/4,75) ound.8 (7,4).075 (,9).95 (7,49).5 (3,8) P (4,75).0/.5 (,57/3,8) ound.8 (7,4).075 (,9).30 (5,84).5 (3,8) P (4,75).078/.375 (,98/9,53) ound.8 (7,4).047 (,9).450 (,43).5 (3,8) P (4,75).3/. (7,9/,8) ound.30 (8,3).09 (,77).535 (3,59).5 (3,8) P (4,75).375/.500 (9,53/,70) Binder.8 (7,4).080 (,03).5 (5,88).5 (3,8) P (4,75).078/.375 (,98/9,50) ound.30 (8,3).09 (,77).455 (,5).5 (3,8) P (,99).0/.00 (,57/5,4) ound.370 (9,40).080 (,03).40 (,).50 (3,8) P (4,75).375/.500 (9,53/,70) ound.30 (8,3).09 (,77).09 (5,47).5 (3,8) P300800*.87 (4,75).375/.750 (9,53/9,05) ound.30 (8,3).09 (,77).850 (,59).5 (3,8) P (,35).350/.500 (8,89/,70) Binder.48 (,89).080 (,03).0 (5,75).50 (3,8) P (,35).350/.500 (8,89/,70) ound.370 (9,40).080 (,03).0 (5,75).50 (3,8) P (,35).5/.330 (3,9/8,38) Binder.48 (,89).080 (,03).375 (9,53).55 (3,94) P (,35).093/.3 (,3/7,9) Binder.48 (,89).080 (,03).500 (,70).50 (3,8) P (4,75).3/. (7,9/,8) Binder.3 (7,9).0 (,57).535 (3,59).5 (3,8) P (4,75).375/.500 (9,53/,70) Binder.35 (8,00).0 (,57).09 (5,47).5 (3,8) *P WILL NOT WOK WITH DIVE IVET INSETION TOOLS /-.05 FO LOCK LENGTH "C" 9 TELEPHONE (870) / 453- micro plastics, inc. FAX (870)

97 TABLE F OF CONTENTS FINDEX A-Z PANEL FASTENES AND HOLE PLUGS NYLON POLY DIVE IVETS VI PAT NUMBE NOMINAL HOLE PANEL THICKNESS ANGE HEAD STYLE HEAD DIA. "A" HEAD HEIGHT "B" LOCK LENGTH "C" PIN DIA. "D" P (4,75).078/.375 (,98/9,53) Binder.3 (7,9).0 (,57).450 (,43).5 (3,8) P (,).40/.550 (3,5/3,99) Binder.375 (9,53).00 (,54).5 (5,88).50 (3,8) P (,35).5/.437 (3,8/,0) Binder.48 (,89).080 (,03).585 (4,8).50 (3,8) P (,35).078/.75 (,98/,99) Button.494 (,55).305 (7,75).375 (9,53).55 (3,94) P (5,54).03/.0 (0,79/,57) Button.375 (9,53).3 (5,).70 (4,3).5 (3,8) P (4,).30/.90 (3,30/7,37) Truss.80 (7,).050 (,7).380 (9,5).0 (3,05) P (4,0).0/.80 (,57/4,57) ound.95 (7,49).050 (,7).30 (5,84).093 (,3) P (4,75).5/.8 (3,9/7,4) Truss.437 (,0).075 (,9).380 (9,5).5 (3,8) P (4,75).0/.87 (,57/4,75) Truss.437 (,0).075 (,9).95 (7,49).5 (3,8) P (5,74).5/.3 (3,8/7,9) Truss.437 (,0).075 (,9).48 (,43).5 (3,8) P (,35).0/.5 (,57/3,8) ound.370 (9,40).080 (,03).8 (5,54).5 (3,8) P (,35).093/.3 (,3/7,9) Truss.48 (,89).080 (,03).500 (,70).50 (3,8) P (,35).8/.500 (7,4/,70) Truss.48 (,89).080 (,03).0 (5,75).50 (3,8) P (,35).09/.5 (,77/3,9) ound (,70) 5/ (7,94) (9,53).55 (3,94) P (3,8).03/.40 (0,79/3,5) ound.87 (4,75).047 (,9).90 (4,83).075 (,9) P (3,8).03/.40 (0,79/3,5) ound.8 (5,54).00 (,5).5 (5,7).075 (,9) P (5,54).87/.50 (4,75/,35) Truss.375 (9,53).080 (,03).343 (8,7).0 (3,05) P (,99).093/.350 (,3/8,89) Binder.0 (5,75).09 (,77).480 (,9).50 (3,8) P (7,).0/.350 (,57/8,89) Truss.485 (,3).075 (,9).48 (,89).87 (4,75) P (,35).093/.3 (,3/7,9) Binder.5 (5,88).09 (,77).500 (,70).50 (3,8) P (,35).8/.500 (7,4/,70) Binder.5 (5,).09 (,77).0 (5,75).50 (3,8) P (,75).093/.87 (,37/4,75) Binder.0 (5,75).09 (,77).300 (7,).50 (3,8) P (4,0).8/.3 (5,54/7,9) ound.375 (9,53).050 (,7).355 (8,89).093 (,3) P000. (5,74).5/.3 (3,8/7,9) ound.375 (9,53).080 (,03).48 (,43).0 (3,05) P (4,75).0/.87 (,57/4,75) ound.375 (9,53).080 (,03).95 (7,49).5 (3,8) P (4,75).5/.8 (3,9/7,4) ound.375 (9,53).080 (,03).380 (9,5).5 (3,8) P (4,75).0/.87 (,57/4,75) ound.375 (9,53).080 (,03).8 (7,4).5 (3,8) P (5,4).078/.300 (,98/7,) Truss.30 (,00).080 (,03).430 (0,9).0 (3,05) +.005/-.05 FO LOCK LENGTH "C" NYLON POLY DIVE IVET MOUNTING FEET PAT NUMBE NOMINAL HOLE PANEL THK. ANGE HEAD STYLE HEAD DIA. HEAD HEIGHT LOCK LENGTH PIN DIA. "A" "B" "C" "D" PMF0000*.80 (7,).0/.87 (,55/4,75) Foot.70 (9,30).570 (4,48).385 (9,78).87 (4,75) PSS (,35).030/.5 (0,7/3,8) Foot.375 (9,53).500 (,70).38 (,05).50 (3,8) * Low Density Polyethylene Material. NYLON POLY DIVE IVET SUPPOTS PAT NUMBE NOMINAL HOLE PANEL THK. ANGE HEAD STYLE HEAD DIA. HEAD HT. LOCK LENGTH PIN DIA. SUP. LENGTH SUPPOT DIA. "A" "B" "C" "D" "F" "E" PSS (4,75).030/.5 (0,7/3,8) Support.35 (8,).030 (0,7).00 (5,08).097 (,4).400 (0,).80 (4,57) PSS (,35).030/.5 (0,7/3,8) Support 3/3 (0,3).047 (,9).87 (4,75).5 (3,8).703 (7,8).40 (,0) mpsales@microplastics.com micro plastics, inc. WEBSITE: 97

98 TABLE F OF CONTENTS FINDEX A-Z PANEL FASTENES AND HOLE PLUGS Micro Plastics' tough, lightweight drive rivet insertion tool makes the assembly of VI our Polyrivets even more economical. This tool provides a faster assembly, more accurate placement and positions in hard to reach areas. Large plunger head and easy-grip handle reduce operator fatigue. DIVE IVET INSETION TOOLS ivets do not have to be predriven. In use, the rivet is loaded in tool and inserted in prepared hole, pressure on the plunger frees the pin and expands the rivet in the assembly. Three sizes are available to cover all standard drive rivets. Tools are color coded for identification. ITEM IVET PIN NUMBE SIZE COLO PT (,9) ED PT05.5 (3,8) YELLOW PT (3,8) GEEN PNEUMATIC DIVE IVET INSETION TOOL BOOST PODUCTIVITY, QUALITY AND COST CONTOL ON YOU ASSEMBLY OPEATIONS The Pneumatic Drive ivet Tool is especially suited for hard to reach or delicate assemblies encountered on all kinds of mechanical and electrical components, appliances, P.C. board assemblies, relays, switches, controls, etc. The durable, lightweight alloy insert tool weighs only ounces and features and easy-grip, non-slip, straight case for single hand fatigue free operation and is equipped with a suspension bail for overhead connections on bench type precision assemblies. The insert tool can be safely used in all positions. In operation the rivet is loaded in the tool and inserted in the prepared hole, slight pressure activates the pneumatic switch and the rivet is driven into the assembly effortlessly. IVETS NEED NOT BE PEDIVEN. Tool is designed to use standard shop air, operating pressure range is 50 to 70 PSI with instant cycling time. One tool will drive all standard rivet sizes, three interchangeable driver attachments are included. Mandrel sizes are.075,.5 and.50 UNIQUE, PECISION TOOL DESIGNED TO EFFICIENTLY ASSEMBLE ALL NYLON DIVE IVETS AND MOST ONE- PIECE TAL EXPANSION IVETS. ITEM NUMBE DESCIPTION COVEED BY U.S. / FOEIGN PATENTS PPT00 PNEUMATIC IVET INSET TOOL WITH 3 DIVE ATTACHNTS ATCHETING ACTION IVETS ATCHETING ACTION IVETS AE MOLDED IN NYLON AND AVAILABLE IN BLACK O NATUAL. PLEASE ADD A COLO CODE TO THE END OF EACH PAT NUMBE IDENTIFING YOU COLO CHOICE. CODE B = BLACK CODE N = NATUAL atcheting action rivets feature a rigid design which provides an outstanding bond created by the action of the interlocking gripper teeth. With the larger head diameter, atcheting action rivets make binding of soft materials a simple application. ITEM NUMBE HEAD DIA. A SHANK LENGTH B HOLE DIA. GIP ANGE 7QB70050 (9,05) 7/3 (5,5) 9/3 (7,4).35/.97 (5,97/(7,54) 7QB (9,05) /3 (8,73) 9/3 (7,4).34/.500 (8,79/,70) 7QB (9,05) (,70) 9/3 (7,4).500/.8 (,70/0,) 7QB70000 (9,05) (9,05) 9/3 (7,4).780/.375 (9,8/34,93) 7QB (0,3) 7/3 (5,5) 9/3 (7,4).35/.97 (5,97/7,54) 7QB (0,3 /3 (8,73) 9/3 (7,4).34/.500 (8,79/,70) 7QB (0,3 (,70) 9/3 (7,4).500/.8 (,70/0,) 7QB (0,3 (9,05) 9/3 (7,4).780/.375 (9,8/34,93) 98 TELEPHONE (870) / 453- micro plastics, inc. FAX (870)

99 TABLE F OF CONTENTS FINDEX A-Z PANEL FASTENES AND HOLE PLUGS "SPECIAL ITEM" TWO PIECE SCEW IVETS Micro Plastics' two-piece screw rivets are designed to fasten larger components or small assemblies to their mating panels. Pressing or tapping the screw through the body creates a secure insulated connection. In addition the screw may be removed with a phillips screw driver and the fastener re-used. ivets are molded from Nylon /. VI ITEM NUMBE ITEM NUMBE ITEM NUMBE Micro Plastics Nylon Snap ivet is designed for assemblies requiring fast and economical fasteners that can be installed without tools.the Piece Molded Fastener comes assembled ready for use. The ivet is placed in the hole and the smooth, oversized head is pressed. The specially designed legs expand and firmly lock the components permanently in place. Micro Plastics Snap ivets are molded in high dielectric (UL 94V) Nylon / making them ideal for electronic applications. The following standard sizes are available from stock, other sizes will be tooled on request. NYLON SNAP IVET * +/-.00 on B DINSION ITEM NUMBE A * B PANEL THICKNESS 7S (4,).35 (3,4).00/.0 (,5/3,0) 7S000.8 (3,0).40 (3,5).050/.00 (,3/,5) 7S00. (3,0).0 (5,5)./.0 (3,0/4,0) 7S (3,9).00 (5,0).00/.40 (,5/3,5) 7S (3,9).40 (,0).44/.88 (3,5/4,5) 7S (5,0).80 (7,0).0/.00 (4,0/5,0) 7S070.0 (,).70 (4,3).078/.8 (,0/3,0) 7S (3,4).0 (5,59).8/.57 (3,00/4,00) 7S (4,0).395 (0,03).90/.330 (7,37/8,38) 7S (4,0).35 (8,0).48/.88 (3,7/4,78) 7S (4,0).3 (5,9).050/.80 (,/4,5) 7S05. (4,).5 (,7).70/.0 (4,3/5,3) 7S (3,0).50 (3,).400/. (0,/,8) 7S (5,0).38 (9,35).30/.300 (5,84/7,) 7S (4,0).35 (8,0).00/.50 (,54/,35) NYLON TWO-PIECE EMOVABLE IVETS emovable rivets are two-piece nylon rivets which can be removed by retracting the pin, and then the body. The body incorporates a slot in line with the pin so that the pin can be removed by inserting a small screw driver, other sharp edge, or even a fingernail underneath the head of the pin. In addition to working in a.50 round hole, will also fit the.0 /.8 square hole found in the darling type shelf commonly used in retail stores. PAT NUMBE A B C / (,).07 (,78) (,70) TELEPHONE (870) / 453- micro plastics, inc. FAX (870)

100 TABLE F OF CONTENTS FINDEX A-Z PANEL FASTENES AND HOLE PLUGS VI Multi-use, light duty Nylon Anchor for use with sheet metal or wood screws. Nylon Anchors can be used in wood, masonry block, concrete, tile, brick or sheet metal. Anchor has twist resisting flange for use in thin wall and hollow materials. Anchors can be color coded for size identification. Metal screw not included. NYLON SCEW ANCHOS ITEM NUMBE SCEW SIZE DILL SIZE A B L WA0875 #-8 3/ (4,7) 5/ (7,94).037 (0,94) 7/8 (,) WA8700 #0- (,35) (9,53).037 (0,94) -5/4 (7,38) WA35385 #4-5/ (7,94) 7/ (,).037 (0,94) (3,93) TYPE A T Mushroom.540 (,7).0 (,79) ound.45 (0,80).5 (3,8) Truss.05 (5,38).0 (,79) Flat.437 (,0).08 (,74) TWO PIECE ANCHO IVETS - STEEL DIVE PIN HIGH STENGTH, ZINC PLATED. DEVELOPS HIGH PULL-OUT FOCE. ALL ITEMS PACKAGED,000 PE BAG DESCIPTION PAT NUMBE "D" "L" TYPE ASM8075 3/ (4,7) X (9,05) Mushroom, Steel ASM800 3/ (4,7) X (5,40) Mushroom, Steel ASM5075 (,35) X (9,05) Mushroom, Steel ASM500 (,35) X (5,40) Mushroom, Steel ASM550 (,35) X - (38,0) Mushroom, Steel AS8075 AS800 AS5075 AS500 AS550 3/ (4,7) 3/ (4,7) (,35) (,35) (,35) X X X X X (9,05) (5,40) (9,05) (5,40) - (38,0) ound, Steel ound, Steel ound, Steel ound, Steel ound, Steel AST8075 AST800 AST5075 AST500 AST550 3/ (4,7) 3/ (4,7) (,35) (,35) (,35) X X X X X (9,05) (5,40) (9,05) (5,40) - (38,0) Truss, Steel Truss, Steel Truss, Steel Truss, Steel Truss, Steel 00 TELEPHONE (870) / 453- micro plastics, inc. FAX (870)

101 TABLE F OF CONTENTS FINDEX A-Z PANEL FASTENES AND HOLE PLUGS TWO PIECE ANCHO IVETS - PLASTIC AND STEEL DIVE PINS VI Micro Plastics' two piece Anchor ivets provide versatile, inexpensive, vibration-resistant blind fasteners for solid or hollow materials including wood, concrete, plaster, metal, plastic, tile block or mortar. Installation is tapped with a hammer. The drive pin expands and seats the rivet securely in place. The supertough nylon anchor body provides high thermal, electrical, corrosion and vibration resistance. Typical uses for Micro liner panels, rails, scuff boards, floor plates, electrical fixtures, signs, plumbing fixtures, piping and conduit strap hangers, window and drapery hardware, railings, storage shelves and other assemblies requiring a fast, rivet is inserted in predrilled hole and Plastics anchor are semi-trailer construction, positive, durable fastener. THE FOLLOWING AE STANDAD SIZES AVAILABLE. MICO PLASTICS, INC. WILL TOOL NON-STANDADS IN SUITABLE QUANTITIES. TYPE A T Mushroom.540 (,7).0 (,79) ound.45 (0,80).5 (3,8) Truss.05 (5,38).0 (,79) Flat.437 (,0).08 (,74) TWO PIECE ANCHO IVETS - PLASTIC DIVE PIN THEMAL AND ELECTICAL INSULATING. COOSION AND VIBATION ESISTANT. DESCIPTION PAT NUMBE "D" "L" TYPE APM8075 APM5075 APM500 APM550 3/ (4,7) (,35) (,35) (,35) X X X X (9,05) (9,05) (5,40) - (38,0) Mushroom, Plastic Mushroom, Plastic Mushroom, Plastic Mushroom, Plastic ALL ITEMS PACKAGED,000 PE BAG AP8075 AP5075 AP500 AP550 3/ (4,7) (,35) (,35) (,35) X X X X (9,05) (9,05) (5,40) - (38,0) ound, Plastic ound, Plastic ound, Plastic ound, Plastic APT8075 APT5075 APT500 APT550 3/ (4,7) (,35) (,35) (,35) X X X X (9,05) (9,05) (5,40) - (38,0) Truss, Plastic Truss, Plastic Truss, Plastic Truss, Plastic APF505 APF5075 (,35) (,35) X X 9/ (4,9) (9,05) Flat, Plastic Flat, Plastic mpsales@microplastics.com micro plastics, inc. WEBSITE: 0

102 TABLE F OF CONTENTS FINDEX A-Z PANEL FASTENES AND HOLE PLUGS VI Micro Plastics economical snap-in Poly-Plugs will close unneeded chassis holes, wiring outlets, fill unused accessory openings, cover inspection and production access holes. They can be used as tube end caps and protective bumpers. Poly Plugs are molded in Nylon / which is abrasion and vibration resistant making them ideal for drawer glides and small appliance feet. Poly Plugs are designed with special flexible and tapered prongs which snugly lock in place with finger pressure but can be removed and reused when necessary. Parts can be furnished in natural nylon or dyed in colors. Poly Plugs are available in smooth, gloss finish or in dull, matte finish. HOLE PLUGS HOLE PANEL HEAD HEAD ITEM HEAD SIZE THICKNESS SIZE HEIGHT NUMBE STYLE FINISH A B D H PP08BG4 Binder Smooth.87 (4,75).03/.40 (0,79/3,5) /3 (8,74).040 (,0) PP08BM4 PP0G0 PP0G09 Binder Dome Dome Matte Smooth Smooth.87 (4,75).8 (5,54).8 (5,54).03/.40 (0,79/3,5).03/.0 (0,79/,58).03/.094 (0,79/,39) /3 (8,74) (9,53) (9,53).040 (,0).50 (,35).50 (,35) PP05BG0 PP05BM0 Binder Binder Smooth Matte (,35) (,35).03/.0 (0,79/,58).03/.0 (0,79/,58) 7/4 (0,7) 7/4 (0,7).040 (,0).040 (,0) PP03BG4 PP03BM4 Binder Binder Smooth Matte.3 (7,93).3 (7,93).03/.40 (0,79/3,5).03/.40 (0,79/3,5) 9/4 (,5) 9/4 (,5).055 (,40).055 (,40) PP0BG09 Binder Smooth.5 (3,8).03/.094 (0,79/,39) 3/4 (5,).040 (,0) PP05BG09 Binder Smooth.50 (3,8).03/.094 (0,79/,39) (,35).040 (,0) PP037BG4 Binder Smooth.375 (9,53).03/.40 (0,79/3,5) 43/4 (7,07).0 (,58) PP037BG3 Binder Smooth.375 (9,53).03/.40 (0,79/3,5) 37/4 (4,8).050 (,7) PP037BM3 Binder Matte.375 (9,53).03/.40 (0,79/3,5) 37/4 (4,8).055 (,40) PP043BG7 PP043BM7 PP048BM PP050BG4 PP050BM4 PP05BG4 PP05BM4 PP0BG07 PP0BM07 PP08BG0 PP08BM0 PP075BG PP075BM PP078BG09 PP078BM09 Binder Binder Binder Binder Binder Binder Binder Binder Binder Binder Binder Binder Binder Binder Binder Smooth Matte Matte Smooth Matte Smooth Matte Smooth Matte Smooth Matte Smooth Matte Smooth Matte.437 (,0).437 (,0).480 (,9).500 (,70).500 (,70).5 (4,8).5 (4,8).5 (5,88).5 (5,88).87 (7,45).87 (7,45).750 (9,05).750 (9,05).787 (0,00).787 (0,00).03/.7 (0,79/4,34).03/.7 (0,79/4,34).03/.039 (0,79/0,99).03/.40 (0,79/3,5).03/.40 (0,79/3,5).03/.40 (0,79/3,5).03/.40 (0,79/3,5).03/.07 (0,79/,83).03/.07 (0,79/,83).03/.09 (0,79/,77).03/.09 (0,79/,77).03/.09 (0,79/,77).03/.09 (0,79/,77).059/.080 (,50/,03).059/.080 (,50/,03) 39/4 (5,47) 39/4 (5,47) 37/4 (4,8) 43/4 (7,07) 43/4 (7,07) 47/4 (8,4) 47/4 (8,4) 5/4 (0,4) 5/4 (0,4) 57/4 (,3) 57/4 (,3) 3/4 (5,00) 3/4 (5,00) 3/4 (5,00) 3/4 (5,00).055 (,40).050 (,7).050 (,7).0 (,58).0 (,58).0 (,58).0 (,58).0 (,58).0 (,58).0 (,58).0 (,58).0 (,58).0 (,58).0 (,58).0 (,58) PP08BG PP08BM PP087BG PP087BM PP00BG PP00BM Binder Binder Binder Binder Binder Binder Smooth Matte Smooth Matte Smooth Matte.8 (0,3).8 (0,3).875 (,3).875 (,3).000 (5,40).000 (5,40).03/.09 (0,79/,77) /3 (,9).03/.09 (0,79/,77) /3 (,9).03/.09 (0,79/,77) 5/4 (7,38).03/.09 (0,79/,77) 5/4 (7,38).03/.09 (0,79/,77) 7/3 (30,9).03/.09 (0,79/,77) 7/3 (30,9).0 (,58).0 (,58).0 (,58).0 (,58).0 (,58).0 (,58) VENT PLUGS VP087BM VP00BM Binder Binder.875 (,3).000 (5,40).03/.09 (0,79/,77) 5/4 (7,38).03/.09 (0,79/,77) 7/3 (30,9).0 (,58).0 (,58) 0 TELEPHONE (870) / 453- micro plastics, inc. FAX (870)

103 TABLE F OF CONTENTS FINDEX A-Z PANEL FASTENES AND HOLE PLUGS Nylon Locking Hole Plugs are available in a large selection of sizes from 3/" to ". These hole plugs are designed with multiple locks to VI positively snap in panel thicknesses ranging from /4" to /8". Locking Hole Plugs are used to close excess chassis holes, wiring outlets, and production access holes. These hole plugs are molded of heat stabilized nylon (UL94V) and may be more suitable for critical or elevated temperature applications. Vent Plugs are available in to 7/8" and " diameters. Locking Hole Plugs are stocked in black. Other colors are available in volume requirements. LOCKING HOLE PLUGS ITEM NUMBE HOLE DIATE MAXIMUM HEAD DIATE THICKNESS THICKNESS B C * MP (4,8).0 (,).50 (,4).34 (5,9) * MP (,4).0 (,).3 (8,0).3 (8,0) * MP03.3 (8,0).0 (,).375 (9,5).3 (8,0) * MP (9,5).5 (3,).48 (,0).40 (0,3) * MP (,0).5 (3,).53 (3,5).40 (0,3) * MP (,7).5 (3,).578 (4,).40 (0,3) * MP05.5 (4,3).5 (3,).5 (,7).40 (0,3) * MP05.5 (5,9).5 (3,).78 (8,).40 (0,3) * MP (7,5).5 (3,).78 (0,0).40 (0,3) * MP (9,0).5 (3,).9 (3,).40 (0,3) * MP08.8 (0,).5 (3,).890 (,).40 (0,3) * MP (,).5 (3,).0 (5,8).453 (,5) ** MP (5,5).5 (3,).03 (30,5).453 (,5) ** MP /5 (8,0/8,5).5 (3,).8 (3,0).453 (,5) ** MP87.87 (30,).5 (3,).3 (33,3).453 (,5) ** MP50.50 (3,0).5 (3,).375 (34,9).453 (,5) ** MP (35,0).5 (3,).500 (38,0).453 (,5) ** MP (38,0).5 (3,).7 (4,7).453 (,5) ** MP (45,0).5 (3,).95 (48,9).453 (,5) **** MP (5,0).5 (3,).40 (55,0).453 (,5) **** MP (3,5).50 (,4).775 (70,5).750 (9,) NOTE: +/-.05 ON ALL DINSIONS * MINIMUM ODE QUANTITY,000 PIECES ** MINIMUM ODE QUANTITY 500 PIECES **** MINIMUM ODE QUANTITY 50 PIECES ***** MINIMUM ODE QUANTITY 00 PIECES LOCKING VENT PLUGS * MP0750V * MP0875V ** MP000V.750 (9,).875 (,5).000 (5,5).5 (3,).5 (3,).5 (3,).90 (3,0).0 (5,8).03 (30,5).40 (0,3).453 (,5).453 (,5) mpsales@microplastics.com micro plastics, inc. WEBSITE: 03

104 TABLE F OF CONTENTS WIE HANDLING HADWAE FINDEX A-Z VII Micro Plastics' molded nylon cable clamps secure, insulate and route cable, wiring, tubing, piping and fibre optics. These tough, durable chemical resistant nylon / cable clamps are perfect for applications in electronics, automotive, air craft, appliance and many other industries. The Heavy Duty Series provides a full " wide contact area for all critical and heavy duty industrial and commercial applications, while the economical Standard Series has a " wide contact area and is designed for medium to lightweight applications. All contact edges have a full radius for product protection. Sizes are clearly marked on each clamp. The following are standard sizes available. Micro Plastics will tool non-standard sizes in suitable quantities. Flame retardant nylon /, % carbon black nylon / (U.V. resistant), and polypropylene clamps are available on special order. MINIATUE CABLE CLAMPS ITEM NUMBE D W H +/-.00 E +/-.00 CCA00 / (0,79) 5/3 (3,97).09 (,44).87 (4,75) CCA0093 3/3 (,38) 5/3 (3,97).09 (,44).03 (5,) CCA05 /8 (3,8) 5/3 (3,97).09 (,44).7 (5,5) CCA05 5/3 (3,97) 5/3 (3,97).09 (,44).33 (5,9) CCA087 3/ (4,7) 5/3 (3,97).09 (,44).50 (,35) CC8E050 (,35) 9/3 (7,4).8 (3,5).337 (8,5) CC8E0375 (9,5) 9/3 (7,4).8 (3,5).400 (0,) STANDAD CABLE CLAMPS NOTE: H AND E DINSIONS AE + / -.05 TOLEANCE. ITEM NUMBE D W H E CC37B05 /8 (3,8) (9,53).40 (3,5).39 (8,3) CC37C05 CC37D05 CC37B087 CC37C087 CC37D087 CC37B087E CC37C087E CC37D087E CC37B050 CC37C050 CC37D050 CC37B03 CC37C03 CC37D03 CC37B0375 CC37C0375 CC37D0375 /8 /8 3/ 3/ 3/ 3/ 3/ 3/ 5/ 5/ 5/ (3,8) (3,8) (4,7) (4,7) (4,7) (4,7) (4,7) (4,7) (,35) (,35) (,35) (7,94) (7,94) (7,94) (9,53) (9,53) (9,53) (9,53) (9,53) (9,53) (9,53) (9,53) (9,53) (9,53) (9,53) (9,53) (9,53) (9,53) (9,53) (9,53) (9,53) (9,53) (9,53) (9,53).7 (4,4).03 (5,).40 (3,5).7 (4,4).03 (5,).40 (3,5).7 (4,4).03 (5,).40 (3,5).7 (4,4).03 (5,).40 (3,5).7 (4,4).03 (5,).40 (3,5).7 (4,4).03 (5,).39 (8,3).39 (8,3).430 (0,9).430 (0,9).430 (0,9).378 (9,0).378 (9,0).378 (9,0).40 (0,4).40 (0,4).40 (0,4).495 (,57).495 (,57).495 (,57).595 (5,).595 (5,). 595 (5,) CC37B0437 CC37C0437 CC37D0437 7/ (,) 7/ (,) 7/ (,) (9,53) (9,53) (9,53).40 (3,5).7 (4,4).03 (5,).574 (4,58).574 (4,58).574 (4,58) CC37B0500 CC37C0500 CC37D0500 (,70) (,70) (,70) (9,53) (9,53) (9,53).40 (3,5).7 (4,4).03 (5,).05 (5,37).05 (5,37).05 (5,37) CC37D05 9/ (4,9) (9,53).03 (5,).0 (5,39) CC37D05 (5,88) (9,53).03 (5,).78 (7,) 04 TELEPHONE: (870) 453- / micro plastics, inc. FAX: (870)

105 F OF CONTENTS WIE HANDLING HADWAE TABLE FINDEX A-Z VII HEAVY DUTY CABLE CLAMPS ITEM NUMBE D W H E CC50C05 /8 (3,8) (,70).7 (4,4).35 (8,00) CC50D05 /8 (3,8) (,70).03 (5,).35 (8,00) CC50C087 3/ (4,7) (,70).7 (4,4).45 (0,80) CC50D087 3/ (4,7) (,70).03 (5,).45 (0,80) CC50C050 (,35) (,70).7 (4,4).40 (0,4) CC50D050 (,35) (,70).03 (5,).40 (0,4) CC50C03 5/ (7,94) (,70).7 (4,4).500 (,70) CC50D03 5/ (7,94) (,70).03 (5,).500 (,70) CC50C0375 (9,53) (,70).7 (4,4).530 (3,4) CC50D0375 (9,53) (,70).03 (5,).530 (3,4) CC50G0375 (9,53) (,70).50 (,35).585 (4,8) CC50C0437 7/ (,) (,70).7 (4,4).50 (4,) CC50D0437 7/ (,) (,70).03 (5,).50 (4,) CC50C0500 (,70) (,70).7 (4,4).595 (5,) CC50D0500 (,70) (,70).03 (5,).595 (5,) CC50C05 9/ (4,9) (,70).7 (4,4).0 (5,39) CC50D05 9/ (4,9) (,70).03 (5,).0 (5,39) CC50C05 (5,88) (,70).7 (4,4).55 (,4) CC50D05 (5,88) (,70).03 (5,).55 (,4) CC50C087 / (7,4) (,70).7 (4,4).755 (9,8) CC50D087 / (7,4) (,70).03 (5,).755 (9,8) CC50C0750 (9,05) (,70).7 (4,4).780 (9,8) CC50D0750 (9,05) (,70).03 (5,).780 (9,8) CC50C08 3/ (0,4) (,70).7 (4,4).85 (0,70) CC50D08 3/ (0,4) (,70).03 (5,).85 (0,70) CC50C0875 7/8 (,) (,70).7 (4,4).845 (,4) CC50D0875 7/8 (,) (,70).03 (5,).845 (,4) CC50D000 (5,40) (,70).03 (5,).90 (3,) CC50D5 /8 (8,58) (,70).03 (5,).970 (4,4) CC50D87 3/ (30,) (,70).03 (5,).000 (5,40) CC50D50 (3,75) (,70).03 (5,).00 (,9) CC50D (34,93) (,70).03 (5,).5 (8,58) CC50D500 (38,0) (,70).03 (5,).90 (30,3) EXTA HEAVY DUTY CABLE CLAMPS ITEM NUMBE D W H E CC87F0750 (9,05) 7/8 (,).387 (9,83).000 (5,40) CC87D003 /3 (,9) 7/8 (,).387 (9,83).5 (8,58) CC87F003 /3 (,9) 7/8 (,).03 (5,).5 (8,58) NOTE: H AND E DINSIONS AE + / -.05 TOLEANCE. Assigned Code mpsales@microplastics.com micro plastics, inc. WEBSITE: 05

106 TABLE F OF CONTENTS WIE HANDLING HADWAE FINDEX A-Z VII ELEASABLE ADHESIVE BACKED WIE CLIPS Micro Plastics' Adhesive Backed Nylon Wire and Cable Clips are used to route wires and cables. The parts are backed with polyurethane foam tape, and feature a releasable clip so wires can be removed after assembly if desired. Parts are stocked in natural, when ordering black parts add the letter "B" to the end of the part number. ITEM NUMBE AWC00375 ITEM NUMBE AWC005 ITEM NUMBE AWC00 ITEM NUMBE AWC0087 ITEM NUMBE AWCF50047 ITEM NUMBE AWCF380 ITEM NUMBE AWC008 0 TELEPHONE: (870) 453- / micro plastics, inc. FAX: (870)

107 HEAVY DUTY CABLE CLIPS ITEM NUMBE DESCIPTION "B" "C" "D" HDCC50 /8" Hvy. dty. Clip HDCC70 3/" Hvy. dty. Clip HDCC340 " Hvy. dty. Clip HDCC970 5/" Hvy. dty. Clip HDCC3590 " Hvy. dty. Clip HDCC40 7/" Hvy. dty. Clip HDCC4840 " Hvy. dty. Clip F OF CONTENTS WIE HANDLING HADWAE TABLE FINDEX A-Z Micro Plastics' Nylon Heavy Duty Cable ClIps are designed for cable and wire applications involving greater than usual loads or connections of critical nature. The rugged clip has reinforced side flanges for additional strength and rigidity. Compact design allows this clip to be used on corners, edges or where space is limited. Clip Has hole for screw mounting. Available in size range for /8" to " diameter cable. VII TOLEANCES +/-.05 ELEASABLE CLAMP ON FIN CLIP BASE ITEM NUMBE A B C BUNDLE DIA. HOLE DIA. PANEL ANGE 3CFB (8,74).5 (4,7).87 (4,75).375 (9,53).87 (4,75) VAIABLE 3CFBO (8,74).5 (4,7).87 (4,75).500 (,70).87 (4,75) VAIABLE 3CFB (8,74).5 (5,88).375 (9,53) (5,40).50 (,35) VAIABLE Micro Plastics announces the Contour Clip. The adhesive-backed part incorporates new design consisting of a hinge type movement in the base which flexes to fit convex or concave surfaces. This flexible base allows the part to be used on cylindrical surfaces such as pipes or tubing, and on irregular surfaces - even around corners. The part molded from nylon and is applied with our standard adhesive-backed tape with an extended paper liner for easy removal of the liner. The part is also available with 3m s VHB (very high bond) tape which develops a high-strength, epoxy type bonding. Simply add VHB to the end of the part number. CONTOU CLIP ITEM NUMBE DESCIPTION CAWC0 Contour Clip mpsales@microplastics.com micro plastics, inc. WEBSITE: 07

108 TABLE F OF CONTENTS WIE HANDLING HADWAE FINDEX A-Z VII Micro Plastics' Nylon Wire Clip provide fast, secure assembly and routing of wires, standard round cable, flat cable and tubing. Micro Plastics' Nylon Spring Clips provide fast, secure assembly and routing of wires, standard round cable, flat cable and tubing. The Spring Clip can also be used to mount panels, glass, displays, or signs. To inspect, add or replace wires, simply pull back clip to allow placement. The tough, flexible nylon clip will spring back to hold the material securely. All contact edges are rounded for product protection. WIE CLIPS SPING CLIP ITEM NUMBE DESCIPTION ITEM NUMBE DESCIPTION WC5003 WIE CLIP X.3 SCP3753 SPING CLIP X.3 WHB SEIES HAS B STYLE CLIP Micro Plastics Wire/Cable Holders are designed to mount into 3/ or 5mm hole diameters. Wire/Cable Holders can be used in a variety of panel thicknesses and materials. Sizes are available to handle wire bundle diameters from.375 to.500. WIE/CABLE HOLDES ITEM NUMBE A* B* C* HOLE DIA. PANEL ANGE WHA VAIABLE WHA VAIABLE WHA VAIABLE WHA VAIABLE WHB /.040 WHB /.040 WHB /.040 WHB /.040 WIE/CABLE HOLDES - TIC SIZES A*,B*, C* COLUMNS +/-.03 ITEM NUMBE A B C HOLE DIA. PANEL ANGE MWHA mm VAIABLE MWHA mm VAIABLE MWHA mm VAIABLE MWHA mm VAIABLE 08 TELEPHONE: (870) 453- / micro plastics, inc. FAX: (870)

109 F OF CONTENTS WIE HANDLING HADWAE TABLE FINDEX A-Z Micro Plastics nylon Single press clips are the convenient and fast way to install wires and cable to almost any surface. Tough, corrosion resistant nylon / clip is backed with a quality foam adhesive tape. The single clip is designed to be used in areas where space is limited or in corners or edges and are supplied on easy-to-use perforated liner strips in sets of to 0 pieces. To install, simply pull the clip off of the liner strip and press into place. No holes to drill or screw to turn. Nylon press clips provide a low in-place assembly that is quick and permanent. Polyurethane foam tape has excellent conformability, high temperature and solvent resistance and high ultimate bond strength. VII *Packaged 50 pcs. per roll **Packaged 00 pcs. per roll SINGLE ADHESIVE BACKED NYLON CABLE CLIPS ITEM NUMBE DESCIPTION "D" "A" "H" "W" ** SPC3037 /8" SNGL CLIP /8" (3,8).493 (,5).7 (5,5) " (9,53) ** SPC0000 3/4" SNGL CLIP 3/4" (5,).808 (0,53).55 (,48) " (,70) ** SPC5550 " SNGL CLIP " (,35).85 (,97).343 (8,7) " (,70) ** SPC385 " SNGL CLIP " (9,53).000 (5,40).475 (,07) " (5,88) * SPC50575 " SNGL CLIP " (,70).5 (8,58).593 (5,0) " (9,05) Micro Plastics nylon double press clips are the convenient and fast way to install wires and cable to almost any surface. Tough, corrosion resistant nylon / clip is backed with a quality foam adhesive tape. The double clip design develops greater shear loads and holding power and are supplied on easy-to-use perforated liner strips in sets of to 0 pieces. To install, simply pull the clip off of the liner strip and press into place. No holes to drill or screw to turn. Nylon press clips provide a low in-place assembly that is quick and permanent. Polyurethane foam tape has excellent conformability, high temperature and solvent resistance and high ultimate bond strength. DOUBLE ADHESIVE BACKED NYLON CABLE CLIPS ITEM NUMBE DESCIPTION "D" "A" "H" "W" ** DPC3037 /8" DBLE CLIP /8" (3,8).70 (9,30). (5,49) " (9,53) ** DPC5550 " DBLE CLIP " (,35).380 (35,05).3 (8,8) " (,70) * DPC380 " DBLE CLIP " (9,53).505 (38,3).455 (,5) " (5,88) * DPC50575 " DBLE CLIP " (,70).00 (40,4).580 (4,73) " (9,05) *Packaged 50 pcs. per roll **Packaged 00 pcs. per roll mpsales@microplastics.com micro plastics, inc. WEBSITE: 09

110 TABLE F OF CONTENTS WIE HANDLING HADWAE FINDEX A-Z VII POTECT WIES, CABLES, TUBING AND OTHE OBJECTS FOM SHAP PANEL EDGES. Continuous Flexible Grommeting can be used for round, square and irregular shaped panels. Flexible grommeting is attached quickly and easily using no special tools. In addition to protecting routed cables, wires, tubing and other objects from chafing or unnecessary cuts, the installed grommeting also puts an attractive finished touch to a product. Continuous flexible grommeting is manufactured to fit over a range of panel thicknesses from.040" to.87". Sheet form materials can include glass, sheet metal and wood. In many cases flexible grommeting will grip the panel tightly and remain in place. Should the panel thickness vary to a point that the grommeting will not adhere tightly by itself, the problem can usually be corrected by a touch of epoxy to keep the grommeting tightly in place. Continuous flexible grommeting comes from the factory in polybagged rolls of 00 feet. Longer lengths can be made available by using bulk spools. Flexible grommeting can also be cut to lengths to meet customer needs. CONTINUOUS, SOLID O SEATED. COLOS: NATUAL O BLACK, CUSTOM COLOS AVAILABLE. CUSTOM LENGTHS AVAILABLE FO VOLU APPLICATIONS. FLEXIBILITY, FITS HOLES OF ANY SHAPE O SIZE. AVAILABLE FOM STOCK IN COILS OF 00 FEET. MATEIAL: POLYETHYLENE. ADD COLO CODE TO THE END OF EACH PAT NUMBE TO SPECIFY COLO SELECTION: BK = BLACK POLYETHYLENE MATEIAL INFOMATION POLYETHYLENE grommeting is a lightweight low cost material good for general indoor applications. Polyethylene is not affected by ordinary solvents and resistant to abrasion. CONTINUOUS FLEXIBLE GOETING - NATUAL O BLACK ITEM MAX PANEL NUMBE THICKNESS GAP EF. A EF. B EF. C EF. TYPE FGU0400P.040/.070 (,0)/(,78).035 (0,89).08 (0,7).07 (,83).90 (4,83) UNCUT FGS0400P.040/.070 (,0)/(,78).035 (0,89).08 (0,7).07 (,83).90 (4,83) SEATED FGU050P.045/.070 (,4)/(,78).040 (,0).08 (0,7).07 (,83).90 (4,83) UNCUT FGS050P.045/.070 (,4)/(,78).040 (,0).08 (0,7).07 (,83).90 (4,83) SEATED FGU00P.055/.075 (,40/(,9).050 (,7).040 (,0).080 (,03).00 (5,08) UNCUT FGS00P.055/.075 (,40/(,9).050 (,7).040 (,0).080 (,03).00 (5,08) SEATED FGU0850P.080/.085 (,03)/(,).075 (,9).040 (,0).085 (,).90 (4,83) UNCUT FGS0850P.080/.085 (,03)/(,).075 (,9).040 (,0).085 (,).90 (4,83) SEATED FGU000P.00/.0 (,54/(3,05).095 (,4).045 (,4).0 (3,05).0 (5,59) UNCUT FGS000P.00/.0 (,54/(3,05).095 (,4).045 (,4).0 (3,05).0 (5,59) SEATED FGU05P.5/.5 (,9)/(3,8). (,84).040 (,0).5 (3,8).0 (5,59) UNCUT FGS05P.5/.5 (,9)/(3,8). (,84).040 (,0).5 (3,8).0 (5,59) SEATED FGU087P.8/.87 (4,)/(4,75).80 (4,57).050 (,7).87 (4,75).75 (,99) UNCUT FGS087P.8/.87 (4,)/(4,75).80 (4,57).050 (,57).87 (4.75).75 (,99) SEATED IBBON CLIPS ITEM NUMBE FCC TELEPHONE: (870) 453- / micro plastics, inc. FAX: (870)

111 CONDUIT CLIPS Q F OF CONTENTS WIE HANDLING HADWAE TABLE FINDEX A-Z Various wiring, such as VII telephone wire, is often routed with electrical conduit. Conduit clips are designed to snap onto electrical conduit. The integrated wireholder on the clip allows wiring to be secured to the conduit. Installation is faster and easier than with a wire tie, which is often used for this purpose. The clip can be easily removed if necessary. Two sizes are avialble for and ID conduit, which will accommodate various wire sizes up to 5/ diameter. Parts are molded in light weight, chemical and corrosion resistant nylon /. ITEM NUMBE DESCIPTION A B C CONDUIT SIZE 3CDC0505 CONDUIT CLIP.00 (5,08).50 (,35).50 (,35) (,70) 3CDC0753 CONDUIT CLIP.3 (7,9).3 (7,9).50 (,35) (9,05) Micro Plastics' molded Nail-In Clips are used to safely install cable T.V., fiber optics, computer networks, telephone and other communication systems, hydraulic and pneumatic systems. The clips are molded in tough, electrically insulating, ultra violet resistant, high density Polyethylene. Main stress areas of the clip have reinforcing ribs designed into the part to strengthen and absorb the impact. The Nail-In Clips have all contact edges radiused to protect cable or tubing from damage. Micro Plastics' clips are supplied with heat treated, galvanized steel nails pre-assembled, ready for use in masonry, wood, plaster, or stucco. Clips are easily and efficiently installed, resulting in a low in-place cost. Micro Plastics' Nail-In Clips are stocked in the most popular cable sizes ranging from 4 mm to 9 mm including the G59 and the double shield cables. *THESE SIZES AE NOT SUITABLE FO USE IN MASONY.,000 PIECE MINIMUM ODE QUANTITY. PLASTIC NAIL-IN CLIPS ITEM NUMBE DESCIPTION A B C D E NCC0400* 4mm 75 COAX.0 (5,33).375 (9,53).0 (4,0).0 (4.,0).5 (5,4) NCC0450F* 4.5mm BELL.05 (5,).398 (0,).05 (,7).8 (5,54).75 (4,45) NCC0500* 5mm G (,35).40 (0,7).00 (5,08).0 (5,).85 (7,4) NCC0700 7mm G-.85 (7,4).535 (3,0).3 (,8).5 (,73).340 (8,4) NCC0800 8mm 59TIAX.300 (7,).0 (5,49).34 (7,98).37 (8,05).400 (0,) NCC0900F 9mm DUAL G.40 (0,7).700 (7,78).5 (5,4) (9,53).335 (8,5) mpsales@microplastics.com micro plastics, inc. WEBSITE:

112 TABLE F OF CONTENTS WIE HANDLING HADWAE FINDEX A-Z VII Micro Plastics bushings provide economical protection for wire, cable tubing, and hose from sharp, uneven drilled or punched holes in sheet metal. The tough, resilient heat stabilized nylon bushings are easily and positively snapped into position without tools. The bushings are the economical solution to insulate wire, cables, etc. from raw edges in compact designs where internal clearances are critical. Miniature bushings accommodate panels up to /" thickness and require only /8" clearance. * MATEIAL HEAT STABILIZED NYLON UL 94V * TEMPEATUE INDEX 05 C * STOCKED IN STANDAD BLACK * COLOS AVAILABLE ON EQUEST NOTE: +/-.05 TOLEANCES on A,B and C DINSIONS. MINIATUE INSULATING BUSHINGS PAT NUMBE INSIDE DIA. HEAD DIA. THICKNESS HOLE DIA. * "A" * "B" * "C" (PANEL) MP000.5 (3,).50 (,4).34 (,).87 (4,8) MP (,4).375 (9,5).34 (,).3 (8,0) MP (8,8).53 (3,5).50 (,4).48 (,9) MP (9,5).5 (4,3).50 (,4).500 (,7) MP (0,3).593 (5,).50 (,4).53 (3,5) MP (,7).703 (7,9).50 (,4).5 (5,9) MP000.5 (,0).88 (,0).50 (,4).750 (9,0) MP (,0).859 (,5).50 (,4).78 (9,9) MP (9,0).937 (3,8).50 (,4).875 (,) ALL ITEMS PACKAGED,000 PE BAG TELEPHONE: (870) 453- / micro plastics, inc. FAX: (870)

113 These bushings are available in a large selection of sizes from " to " in various inside diameter openings. Standard bushings are designed with multiple locks to positively snap in panels ranging from /3" to /8" thickness. F OF CONTENTS WIE HANDLING HADWAE TABLE FINDEX A-Z VII Standard bushings meet Underwriters Laboratories and Canadian Standards Association temperature and pull-out tests. NOTE: +/-.05 TOLEANCES on A,B and C DINSIONS. STANDAD INSULATING BUSHING DESCIPTION PAT DINSIONS CHASSIS DINSIONS --- ITEM NUMBE INSIDE DIA. HEAD DIA. THICKNESS HOLE DIA. MAXIMUM "A" "B" "C" THICKNESS * MP050.5 (3,).3 (8,0).3 (8,0).50 (,).0 (,) * MP (4,8).375 (9,5).3 (8,0).3 (8,0).0 (,) * MP (4,8).48 (,9).40 (0,3).375 (9,5).5 (3,) * MP (,4).48 (,9).40 (0,3).375 (9,5).5 (3,) * MP (,4).53 (3,5).40 (0,3).437 (,).5 (3,) * MP (8,0).53 (3,5).40 (0,3).437 (,).5 (3,) * MP (,).53 (3,5).40 (0,3).437 (,).5 (3,) * MP (,4). 578 (4,7).40 (0,3).500 (,7).5 (3,) * MP (8,0).578 (4,7).40 (0,3).500 (,7).5 (3,) * MP (9,5).578 (4,7).40 (0,3).500 (,7).5 (3,) * MP055.3 (8,0).5 (,7).40 (0,3).5 (4,3).5 (3,) * MP (9,5).5 (,7).40 (0,3).5 (4,3).5 (3,) * MP (,).5 (,7).40 (0,3).5 (4,3).5 (3,) * MP (,4).78 (8,).40 (0,3).5 (5,9).5 (3,) * MP (,).78 (8,).40 (0,3).5 (5,9).5 (3,) * MP (,7).78 (8,).40 (0,3).5 (5,9).5 (3,) * MP (,7).78 (9,8).40 (0,3).87 (7,5).5 (3,) * MP (4,3).78 (9,8).40 (0,3).87 (7,5).5 (3,) * MP (9,5).843 (,4).40 (0,3).750 (9,).5 (3,) * MP (,7).843 (,4).40 (0,3).750 (9,).5 (3,) * MP (4,3).843 (,4).40 (0,3).750 (9,).5 (3,) * MP (5,9).843 (,4).40 (0,3).750 (9,).5 (3,) * MP (4,3).890 (,).40 (0,3).8 (0,).5 (3,) * MP080.5 (5,9).890 (,).40 (0,3).8 (0,).5 (3,) ** MP (9,5).953 (4,).453 (,5).875 (,).5 (3,) ** MP (,).953 (4,).453 (,5).875 (,).5 (3,) ** MP (,7).953 (4,).453 (,5).875 (,).5 (3,) ** MP (4,3).953 (4,).453 (,5).875 (,).5 (3,) ** MP (5,9).953 (4,).453 (,5).875 (,).5 (3,) ** MP (7,4).953 (4,).453 (,5). 875 (,).5 (3,) ** MP (9,0).5 (8,).453 (,5).000 (5,4).5 (3,) ** MP093.8 (0,).8 (30,9).453 (,5).093 (7,8).5 (3,) ** MP (,).8 (30,9).453 (,5).093 (7,8).5 (3,) ** MP (3,8).8 (30,9).453 (,5).093 (7,8).5 (3,) *** MP (3,8).3 (33,3).453 (,5).87 (30,).5 (3,) *** MP (3,8).359 (34,5).453 (,5).50 (3,7).5 (3,) *** MP (5,4).48 (37,3).453 (,5).375 (34,9).5 (3,) *** MP507.0 (7,0).09 (40,9).453 (,5).500 (38,).5 (3,) *** MP508.5 (8,5).09 (40,9).453 (,5).500 (38,).5 (3,) *** MP50.3 (33,3).09 (40,9).453 (,5).500 (38,).5 (3,) *** MP (34,9).875 (47,).453 (,5).750 (44,4).5 (3,) *** MP00.5 (4,).5 (54,0).453 (,5).000 (50,8).5 (3,) * Minimum order quantity,000 pieces. ** Minimum order quantity 500 pieces. *** Minimum order quantity 50 pieces. mpsales@microplastics.com micro plastics, inc. WEBSITE: 3

114 TABLE F OF CONTENTS WIE HANDLING HADWAE FINDEX A-Z VII Micro Plastics Threaded Lampcord Bushings are molded in tough Black Heat Stabilized Nylon (Underwriters Laboratories ated 94V, Temperature Index 05 C). Micro Plastics has available from stock the most popular sizes of Threaded Lampcord Bushings. These bushings are designed to protect the electrical lampcord from the knife-edge of the threaded pipe used in light fixtures. They will easily thread onto standard lamp fixture /8 NPS and NPS threaded ends. Micro Plastics bushings will provide reliable, safe and insulated connections. Micro Plastics has available from stock the most popular sizes of Threaded Lampcord Bushings. NYLON THEADED LAMPCOD BUSHINGS ITEM NUMBE DESCIPTION A B 04MP05TLB /8 NPS 9/3" 9/3" 04MP050TLB NPS 3/3" " 04MP0375TLB NPS 7/8" 7/" 04MP0500TLB NPS /" " LED HOLDES FO STANDAD LED T - ITEM NUMBE A B C HOLE SIZE PANEL ANGE 7LEDHO.37 (8,.05).05 (0,4).50 (,35).40 /.47 (,0) / (,7).070 (,78) 7LEDH0.357 (9,07).098 (,49).0 (5,59).8 /.87 (7,4) / 7,9).04 (,7) PC. NYLON THEADED BUSHING NUT DINSIONS ITEM NUMBE THICKNESS WENCHING FLATS THEAD 04MP0500TB 7/4" -/" NPS 4 TELEPHONE: (870) 453- / micro plastics, inc. FAX: (870)

115 F OF CONTENTS WIE HANDLING HADWAE TABLE FINDEX A-Z Micro Plastics' exclusive anti-twist design was developed to eliminate the electrical cord from twisting inside the lamp. Anti-Twist Bushings' convenient opening allows it to slip easily around the cord. When the Lampcord Bushing is threaded over the cord the two bushings slip together allowing for easy installation onto any standard lamp fixture. Anti-Twist Bushing fits a /8" pipe thread and accommodates a standard cord size of SPT-, 8,. The bushing was designed to be used with Micro Plastics' standard /8" Lamp Cord Bushing. Other sizes will be tooled upon request. VII ANTI-TWIST BUSHING ITEM NUMBE DESCIPTION A B C D ef. 04MP05ATB /8" ANTI-TWIST MP050ATB " ANTI-TWIST Micro Plastics Lamp Snap Bushings are an economical approach to the protection of lampcord insulation, from the sharp and often burred ends of the standard threaded pipe used in lamp manufacture. Bushings are molded of black Hidensity Polyethylene, to allow flexibility for easy installation, and durability for long lasting cord protection. LAMP SNAP BUSHINGS Minimum order quantity,000 pieces. ITEM NUMBE DESCIPTION L A B F G 04MP05SB /8" SNAP " " /3" MP050SB " SNAP 5/3" 7/4" /3" PATS AE MOLDED IN APPLIANCE WHITE NYLON NYLON THEADED TUBING ITEM NUMBE A B C 04MP3500TT 3/4" -8 NPS 3 " +/- /" 04MP350TT 3/4" -8 NPS 3 " +/- /" mpsales@microplastics.com micro plastics, inc. WEBSITE: 5

116 TABLE F OF CONTENTS WIE HANDLING HADWAE FINDEX A-Z VII Micro Plastics Nylon "ALL-FIT" Adjustable Bushings are designed to protect wire, cable, tubing or irregular shaped items from sharp, unfinished edges. The specially designed, resilient multiple supports absorb shock and vibration, and adjust to accept various diameters and shapes. The All-Fit Bushing is equipped with multiple locks to positively snap in panel thicknesses ranging from /3" to /8". ALL-FIT ADJUSTABLE BUSHINGS DESCIPTION CHASSIS DINSIONS PAT DINSIONS ITEM HOLE MAXIMUM HEAD DIA. THICKNESS MAXIMUM NUMBE DIA. THICKNESS *B *C I.D. AF05 AF0750 AF08 AF0875 AF000 AF093.5 (5,9).750 (9,0).8 (0,).875 (,).000 (5,4).093 (7,8).5 (3,).5 (3,).5 (3,).5 (3,).5 (3,).5 (3,).78 (8,).859 (,8).890 (,).937 (3,8).0 (,9).5 (9,3).40 (0,3).390 (9,9).390 (9,9).453 (,5).453 (,5).453 (,5).437 (,).500 (,7).500 (,7).5 (4,).750 (9,0).8 (0,) MINIMUM ODE QUANTITY,000 PIECES. * +/-.05 TOLEANCE LED SPACE ITEM NUMBE OD ID LENGTH 7LEDSP050 7LEDSP0375 7LEDSP0500 3/ (4,7) 3/ (4,7) 3/ (4,7).05 (,4).05 (,4).05 (,4) (,35) (9,53) (,70) Micro Plastics' Dummy Plugs are designed to electrically isolate unused bullet type "female" terminals in wiring harnesses, to prevent short circuits due to harness movement. Molded of tough electrically insulating black Nylon, these plugs are easily inserted with normal hand pressure and removable for addition of electrical accessories. DUY PLUGS ITEM NUMBE DP40030 TELEPHONE: (870) 453- / micro plastics, inc. FAX: (870)

117 F OF CONTENTS WIE HANDLING HADWAE TABLE FINDEX A-Z Micro Plastics New (Patented) "EZ" Strain elief Bushing is designed to save money. This Strain elief Bushing eliminates several costly and fatigue prone assembly steps. To install, the "EZ" Bushing hinged halves are simply folded over the wire or cable. No special orientation or alignment is necessary! Conventional Strain elief Pliers are applied to the specially designed gripped grooves and the bushing is inserted and locked in place in one smooth VII motion. The "EZ" Strain elief Bushing design incorporates a bullet shaped, streamlined nose and does away with the large cumbersome straps that complicate the assembly of the conventional style bushing in confined areas. Micro Plastics "EZ" Strain elief Bushings securely anchor, absorb and protect cables and wires from push/pull and twist forces and insulate them from irregular or sharp panel edges. These tough nylon bushings meet all Underwriters Laboratories stringent pull-out and temperature specifications. *EASILY INSTALLED *COMPETITIVELY PICED "EZ" STAIN ELIEF BUSHINGS *SECUE IN USE *FULLY APPOVED DESCIPTION DINSIONS MOUNTING HOLE BUSHINGS ITEM NUMBE UL/CSA COSS CABLE SIZE CABLE GAUGE DIATE FLATS MAX PANEL LENGTH WIDTH DESCIPTION TYPE (AWG) A B THICKNESS C D E 3MP04KEZH * MP4KEZH Flat 0.50 X 0.80 (3,8 X 7,) HPN 8/ (,7) 0.45 (,8) 0.00 (,5) (4,0) (,8) 0.50 X 0.80 (3,8 X 7,) HPN / (,7) 0.45 (,8) 0.00 (,5) 3MP04KEZS * MP4KEZS Flat 0.50 X 0.80 (3,8 X 7,) SPT 8/ (,7) 0.45 (,8) 0.00 (,4) (4,7) 0.50 (,9) 0.50 X 0.80 (3,8 X 7,) SPT / (,7) 0.45 (,8) 0.00 (,4) 3MP04NEZH * MP4NEZH Flat 0.50 X 0.80 (3,8 X 7, ) HPN 8/ (,7) 0.45 (,8) 0.0 (,) (4,0) (,8) 3MP04NEZS * MP4NEZS Flat 0.50 X.80 (3,8 X 7,) SPT 8/ (,7) 0.45 (,8) 0.0 (,) (4,4) (,7) 0.0 X (4, X 7,) SPT / (,7) 0.45 (,8) 0.0 (,) 3MP0N34EZ * MPN34EZ ound (7,) SJT /3 0.5 (5,9) (4,0) 0.0 (,) (8,8) 0.40 (,) (9,0) SJ /3 0.5 (5,9) (4,0) 0.0 (,) (0,) SJT 8/3 0.5 (5,9) (4,0) 0.0 (,) 3MP0P34EZ * MP P34EZ ound (7,) SJT /3 0.5 (5,9) (4,0) 0.5 (3,) (8,8) 0.40 (,) (9,0) SJ /3 0.5 (5,9) (4,0) 0.5 (3,) (0,) SJT 8/3 0.5 (5,9) (4,0) 0.5 (3,) 3MP0N4EZ * MPN4EZ ound (7,) SJT 8/ 0.5 (5,9) (4,0) 0.0 (,) (8,5) 0.40 (,) (9,9) SJO 8/ 0.5 (5,9) *MINIMUM ODE QUANTITY,000 PIECES. **MINIMUM ODE QUANTITY 500 PIECES. ***MINIMUM ODE QUANTITY 50 PIECES. ****MINIMUM ODE QUANTITY 00 PIECES. mpsales@microplastics.com micro plastics, inc. WEBSITE: 7

118 TABLE F OF CONTENTS WIE HANDLING HADWAE FINDEX A-Z VII STAP TYPE " X" STAP TYPE " Y" STAP TYPE " Z" Micro Plastics' one piece Strain elief Bushings securely anchor, absorb and protect cables and wires from push/pull and twist forces and insulate them from irregular or sharp panel edges. These tough nylon bushings meet all Underwriters Laboratories' stringent pull-out and temperature specifications. They are easily and quickly installed with Micro Plastics special installation pliers or other hand or production tools. Stock sizes in black H.S. Nylon, temperature index 05 Centigrade (U.L. rated 94V). Micro Plastics can tool other sizes upon request. STAIN ELIEF BUSHINGS DESCIPTION DINSIONS ITEM NUMBE 3MP0M40 * UL/CSA DESCIPTION MPM4 COSS ound CABLE SIZE 0.5 X 0.87 (3,9 X 4,7) CABLE TYPE AWN GAUGE (AWG) 4 STAP TYPE "Y" MOUNTING HOLE BUSHINGS---- DIATE A (9,5) FLATS B.0330 (8,4) MAX PANEL THICKNESS C 0.0 (,) LENGTH D 0.40 (0,4) WIDTH E 0.39 (9,9) 3MP0M50 * MPM5 ound 0.5 X 0.5 (3, X 3,9) AWN "Y" (9,5) (8,4) 0.0 (,) 0.40 (0,4) 0.39 (9,9) 3MP0L0 * MPL Flat 0.0 X 0.0 (3,0 X 3,9) SPT- 8/ "Y" (9,5) (8,4) 0.5 (3,) 0.40 (0,4) 0.40 (0,7) 3MP0P40 * MPP4 Flat 0.0X0.0 (3,0 X 5,) SPT- 8/ "Y".0375 (9,5) (8,4) 0.0 (,) 0.40 (0,4) 0.40 (0,7) 3MP03P40 * MP3P4 Flat 0.0 X 0.0 (3,0 X 5,) SP- SPT- 8/ 8/ "Y" (,) (9,9) 0.0 (,) 0.40 (0,4) (,3) 3MP04K0 * MP4K Flat 0.50 X (3,8 X 0,) 0.0 X (4, X 7,) 0.0 X (4, X 7,) 0.50 X 0.80 (3,8 X 7,) 0.50 X 0.80 (3,8 X 7,) SPT- HPN SPT- HPN SPT- 8/3 / / 8/ 8/ "Y" (,7) 0.40 (,7) (,4) (,) 0.55 (4,4) 3MP04KZ * MP4KZ Flat 0.50 X (3,8 X 0,) 0.0 X (4, X 7,) 0.0 X (4, X 7,) 0.50 X 0.80 (3,8 X 7,) 0.50 X 0.80 (3,8 X 7,) SPT- HPN SPT- HPN SPT- 8/3 / / 8/ 8/ "Z" (,7) 0.40 (,7) (,4) (,) 0.55 (4,4) 3MP04L0 MP4L0 Flat 0.50 X (3,8 X 0,) 0.0 X (4, X 7,) 0.0 X (4, X 7,) 0.50 X 0.80 (3,8 X 7,) 0.50 X 0.80 (3,8 X 7,) SPT- HPN SPT- HPN SPT- 8/3 / / 8/ 8/ "Z" (,7) 0.40 (,7) 0.87 (4,7) (,) 0.55 (4,4) *MINIMUM ODE QUANTITY,000 PIECES. **MINIMUM ODE QUANTITY 500 PIECES. ***MINIMUM ODE QUANTITY 50 PIECES. ****MINIMUM ODE QUANTITY 00 PIECES. 8 TELEPHONE: (870) 453- / micro plastics, inc. FAX: (870)

119 F OF CONTENTS WIE HANDLING HADWAE TABLE FINDEX A-Z STAIN ELIEF BUSHINGS DESCIPTION DINSIONS MOUNTING HOLE BUSHINGS---- ITEM NUMBE 3MP04K40 * UL/CSA DESCIPTION MP4K4 COSS Flat CABLE SIZE 0.0 X (3,0 X 7,) CABLE TYPE SPT- SPT- HPN GAUGE (AWG) 8/3 8/ 8/ STAP TYPE "Y" DIATE A (,7) FLATS B 0.45 (,8) MAX PANEL THICKNESS C 0.00 (,5) LENGTH D 0.40 (0,3) VII WIDTH E (4,7) 3MP04L40 * MP4L4 Flat 0.0 X (3,0 X 7,) SPT- SPT- HPN 8/3 8/ 8/ "Y" (,7) 0.45 (,8) 0.5 (3,9) 0.40 (0,3) (4,7) 3MP04N40 * MP4N4 Flat 0.0 X (3,0 X 7,) SPT- SPT- HPN 8/3 8/ 8/ "Y" (,7) 0.45 (,8) 0.0 (,) 0.40 (0,3) (4,7) 3MP04J40 * MP4J4 Flat 0.0 X (3,0 X 7,) SPT- SPT- HPN 8/3 8/ 8/ "Y" (,7) 0.45 (,8) 0.03 (,) 0.40 (0,3) (4,7) 3MP05K40 * MP5K4 Flat 0.50 x.400 (3,8 x 0,) SPT- / "Y" 0.5 (4,3) (3,5) 0.5 (3,) 0.09 (5,5) 0.5 (5,9) 3MP05KN4 * MP5KN4 Flat 0.50 x (3,8 x 0,) 0.0 x (4, x 7,) SPT- SPT- 8/3 / "Y" "Y" 0.5 (4,3) (3,5) 0.0 (,) 0.09 (5,5) 0.5 (5,9) 3MP05N40 * MP5N4 ound 0.50 (,4) 0.55 (,5) 0.90 (7,4) SV SVT SV SVT HPD 8/ 8/ 8/3 8/3 / "Y" (,7) X 0.55 (,7 X 3,) X 0.55 (,7 X 3,) (,4) 0.0 (,) (,) (4,7) 3MP05P40 * MP5P4 ound 0.50 (,4) 0.55 (,5) 0.90 (7,4) SV SVT SV SVT HPD 8/ 8/ 8/3 8/3 / "Y" (,7) X 0.55 (,7 X 3,) X 0.55 (,7 X 3,) (,4) 0.00 (.5) (,) (4,7) 3MP05W0 * MP5W Flat 0.0 x (3,0 x 7,) 0.0 x (4, x 7,) 0.0 x 0.40 (4, x 0,4) 0.0 x (4, x 9,4) SPT- SPT- SPT- HPN 8/3 / /3 /3 "Y" 0.5 (4,3) (3,5) 0.5 (3,) 0.09 (5,5) 0.5 (5,9) 3MP0N34 * MPN34 ound (9,0) (0,) (0,9) SJ SJT SJT /3 8/3 /3 "Y" 0.5 (5,9) (4,0) 0.0 (,) (4,7) (7,9) 3MP0N35 * MPN35 ound (9,9) (9,9) (0,3).405 (0,3) (9,9) SJO SJ SJT SJO SJT 8/ 8/ / 8/ 8/ "Y" 0.5 (5,9) (4,0) 0.0 (,) (4,7) (7,9) 3MP0N40 ** MPN4 ound (7,) SJT SJO 8/ 8/ "Y" 0.5 (5,9) (4,0) 0.0 (,) (4,7) (7,9) 3MP0N44 ** MPN44 Flat 0.0 X (3,0 X 7,) SPT- 8/3 "Y" 0.5 (5,9) (4,4) 0.0 (,) 0.00 (5,) 0.90 (7,5) *MINIMUM ODE QUANTITY,000 PIECES. **MINIMUM ODE QUANTITY 500 PIECES. ***MINIMUM ODE QUANTITY 50 PIECES. ****MINIMUM ODE QUANTITY 00 PIECES. mpsales@microplastics.com micro plastics, inc. WEBSITE: 9

120 TABLE F OF CONTENTS WIE HANDLING HADWAE FINDEX A-Z VII ITEM NUMBE 3MP0N45 ** STAIN ELIEF BUSHINGS DESCIPTION DINSIONS MOUNTING HOLE BUSHINGS---- UL/CSA DESCIPTION MPN45 COSS Flat CABLE SIZE 0.0 X (3,0 X 7,) CABLE TYPE SPT- GAUGE (AWG) 8/3 STAP TYPE "Y" DIATE A 0.5 (5,9) FLATS B (3,8) MAX PANEL THICKNESS C 0.0 (,) LENGTH D 0.00 (5,) WIDTH E 0.90 (7,5) 3MP0P34 ** MPP34 ound (8,3-9,) SJ SJT SJO 8/3 /3, 8/3 8/3 "Y" 0.5 (5,9) (4,0) 0.5 (3,) (4,7) (7,9) 3MP0P35 ** MPP35 ound (8,3-9,) SJ SJT SJO 8/,8/3,/ /,8/ 8/,,,8/3 "Y" 0.5 (5,9) (4,0) 0.5 (3,) (4,7) (7,9) 3MP0L0 ** MPL ound (8,3-0,9) SJ SJT SJO 8/,8/3 /,/3 Z 0.5 (5,9) (4,0) 0.5 (3,) 0. (,9) 0.75 (8,4) 3MP0P40 ** MPP4 ound (7,) SJ SJT SJO 8/ 8/ 8/ "Y" 0.5 (5,9) (4,0) 0.5 (3,) (4,7) (7,9) 3MP0W0 * MPW ound (7,) SJ SJT SJO 8/ 8/ 8/ "Y" (,7) 0.45 (,8) (,3) (,) 0.53 (4,3) 3MP07K0 *** MP7K ound 0.35 X 0.30 (8,3 X 9,) SJ SJT SJO 8/4,/,/3,4/, 8/3,/3 4/,/3,8/4 "Z" (,) (9,) 0.5 (3,) (9,) 0.9 (3,4) 3MP07P0 ** MP7P ound 0.30 (9,) (9,4) (0,3) (0,9) (0,3) (0,9) (0,3) (9,9) (9,9) (0,3) SJTO SJT S S STO STO S S STO STO 8/4 4/3 8/3 /3 8/3 /3 / 8/ 8/ / "X" (9,0) 0.0 (,8) 0.5 (3,) (8,9) (,0) 3MP07K30 *** MP7K3 ound (8,3-9,) SJ SJT SJO 8/3,/ / 8/3,/ "Z" (,) (9,) 0.5 (3,) (9,) 0.9 (3,4) 3MP07P30 ** MP7P3 Flat 0.0 X 0.40 (4, X 0,4) SPT- /3 "Z" 0.73 (8,7) 0.57 (,7) 0.5 (3,) (4,9) (9,9) 3MP07W0 *** MP7W ound (9,4-0,8) (9,9-0,9) SJT S STO 4/3 /3 8/3,/3 /,,3,8/3 "Z" (,) (9,) 0.5 (3,) (9,) 0.9 (3,4) 3MPO8P0 *** MP8P ound (3,5-5,) S ST 4/,4/3 / "Z" (,) (,3) 0.5 (3,) 0.8 (0,) 0.9 (3,4) 3MP09P0 **** MP9P ound (4,4) 0.40 (,3) 0.50 (,5) (7,7) S S S S / /3 0/ 0/3 "Y".093 (7,7).5 (8,5).093 (7,7).87 (30,).000 (5,4).000 (5,4).000 (5,4).000 (5,4) 0.8 (7,) 0.8 (7,) 0.8 (7,) 0.8 (7,) (5,) (5,) (5,) (5,).5 (30,8).5 (30,8).5 (30,8).5 (30,8) *MINIMUM ODE QUANTITY,000 PIECES. **MINIMUM ODE QUANTITY 500 PIECES. ***MINIMUM ODE QUANTITY 50 PIECES. ****MINIMUM ODE QUANTITY 00 PIECES. 0 TELEPHONE: (870) 453- / micro plastics, inc. FAX: (870)

121 F OF CONTENTS WIE HANDLING HADWAE TABLE FINDEX A-Z STAIN ELIEF BUSHINGS DESCIPTION DINSIONS MOUNTING HOLE BUSHINGS---- ITEM NUMBE 3MP30-0 ** UL/CSA COSS DESCIPTION MP30- Flat CABLE SIZE 0.0 X 0.40 (4, X 0,4) 0.0 X (3,0 X 7,) CABLE TYPE SPT- SPT- GAUGE (AWG) /3 STAP TYPE "Z" DIATE A 0.50 (4,) FLATS B (8,5) MAX PANEL THICKNESS C 0.5 (3,) LENGTH D 0.70 (7,0) VII WIDTH E (9,) 3MP0300 * MP30 Flat 0.50 X (3,8 X 0,) SPT- 8/3 "Z" 0.5 X (5,9 X9,5) 0.5 (5,9) 0.00 (,5) 0.40 (,) 0.0 (,7) 0.0 X 0.40 (4, X 0,4) SPT- 8/3 0.5 X (5,9 X 9,5) 0.5 (5,9) 0.00 (,5) 0.40 (,) 0.0 (,7) 0.30 X 0.50 (8, X,5) SPT-3 /3 0.5 X (5,9 X 9,5) 0.5 (5,9) 0.00 (,5) 0.40 (,) 0.0 (,7) 3MP3-0 *** MP3- Flat (0,8 -,) SJT /3 "Z" (,) (,3) 0.5 (3,) 0.8 (0,) 0.9 (3,4) ound 0.80 X 0.45 (4,5 X 0,8) SPT-3 /3 3MP33-0 ** MP33-0 Flat 0.45 X 0.45 (, X 0,8) SPT-3 /3 "Z" X (9, X,) (,) 0.5 (3,) (9,5) (,7) 0.40 X 0.40 (, X 0,) SPT-3 4/ X (9, X,) (,) 0.5 (3,) (9,5) (,7) 0.40 X 0.55 (, X 3,3) HPN 4/ X (9, X,) (,) 0.5 (3,) (9,5) (,7) 3MP34-X *** MP34-X Flat 0.40 X 0.40 (, X 0,7) SPT-3 4/3 "X" (,) (,3) 0.5 (3,) 0.8 (0,) 0.9 (3,4) 0.90 X 0.50 (7,4 X,5) /3 90 ANGLE STAIN ELIEF BUSHINGS 3MP3L0 * MP3L Flat 0.0 X 0.0 (3,0 X 5,) SPT- 8/ "Z" (,) (9,9) 0.0 (,) (,7) 0.50 (,9) 3MP4L0 MP4L Flat 0.50 X 0.80 (3,8 X 7,) SPT- 8/,/ "Z" (,7) (,4) 0.00 (,5) 0.87 (7,5) 0.53 (4,3) 0.0 X (4, X 7,) HPN / 3MP5L0 * MP5L ound 0.50 X 0.5 (,4 X,7) SV 8/,8/3 "Z" (,7) (,4) 0.00 (,5) 0.87 (7,5) 0.5 (4,3) 3MPL0 ** MPL Flat.50 X.400 () X (0,) SP- 8/3 Z 0.5 (4,3) 0.55 (3,3).5 (3,) 7/8 (,) (5,9).0 X.370 (4,) X (9,4) HPN /3.90 X.350 (4,8) X (8,9) SPT-3 8/.00 X.370 (5, X (9,4) / *MINIMUM ODE QUANTITY,000 PIECES. **MINIMUM ODE QUANTITY 500 PIECES. ***MINIMUM ODE QUANTITY 50 PIECES. ****MINIMUM ODE QUANTITY 00 PIECES. mpsales@microplastics.com micro plastics, inc. WEBSITE:

122 TABLE F OF CONTENTS WIE HANDLING HADWAE FINDEX A-Z VII STAIN ELIEF TOOLS STANDAD ITEM NUMBE 3MPT000 Micro Plastics' Standard adjustable Strain elief Assembly Pliers. An indispensable tool for fast, accurate assembly of bushings. EGONOMIC ITEM NUMBE 3MPET000 Micro Plastics' Adjustable Ergonomic Strain elief Tool has been carefully designed to help reduce the wrist fatigue associated with bushing installation. The handles are preset to a specified angle, allowing the hand and wrist of the operator to naturally align during normal use. This tool is fully adjustable and will install all sizes of micro plastics strain relief bushings. PNEUMATIC PNEUMATIC EGONOMIC ITEM NUMBE ITEM NUMBE 3PMPT000 3PMPET000 Micro Plastics' Pneumatic-Ergonomic Strain Micro Plastics' Pneumatic Strain elief Installation Tool is designed to aid in rapid assembly of strain relief bushings. The easy finger tip actuation of this air tool greatly lessens the gripping power necessary to install bushings and reduces the hand and wrist fatigue generated during moderate to high volume manufacturing. The tool operates on standard shop air from 50 to 90 PSI. Low weight, only 4 ounces. Tools are configured prior to shipping. For specific sizes, please specify strain relief bushing sizes to be installed when ordering. elief Installation Tool has been carefully designed to help reduce the wrist fatigue associated with the rapid assembly of strain relief bushings. The easy trigger-type actuation of this air tool, in combination with the ergonomic angle of the hand grip, allow natural alignment of the wrist and hand during normal bushing installation. The tool operates on standard shop air from PSI. Lightweight, only 8 ounces. Tools are configured prior to shipping. Please specify strain relief bushing sizes to be installed when ordering. NOT AVAILABLE FO HOLE SIZES LAGE THAN " Nylon "EZ" twist lock with integral label area for writing. Permanent ink pens, felt tip pens, pressure-sensitive adhesive labels, or even Post-it notes can be used on polished label area. LABEL TWIST LOCK ITEM NUMBE BUNDLE DIATE L 3EZLB050 " (,35) 3-3/3 (78,59) 3EZLB0375 " (9,53) 3-9/3 (83,34) TELEPHONE: (870) 453- / micro plastics, inc. FAX: (870)

123 TABLE F OF CONTENTS WIE HANDLING HADWAE FINDEX A-Z VII Micro Plastics Beaded Ties provide economical temporary or permanent bundling, harnessing, tagging and identification marking. Beaded Ties smooth, rounded configuration elimates damage to wire and cable insulation. No tools are necessary. Ties can be disassembled and reused. Beaded Ties are available in Nylon and Polyethylene. Special colors are available upon request. BEADED TIES ITEM NUMBE DESCIPTION LENGTH 3045N 45 N 4 (08) 3000N 00 N (5) 30800N 800 N 8 (03) 3000N 000 N 0 (54) HEAVY DUTY POLYETHYLENE BEADED TIES ITEM NUMBE DESCIPTION LENGTH 3045P 45 P 4 (08) 3000P 00 P (5) 30800P 800 P 8 (03) 3000P 000 P 0 (54) HEAVY DUTY POLYETHYLENE BEADED TIES AE MOLDED IN YELLOW. LABEL BEADED TIE Nylon beaded tie with integral label area for writing. Permanent ink pens, felt tip pens, pressure-sensitive adhesive labels, or even Post-it notes can be used on polished label area. The "LP" pointed version can be used to pierce thin materials. The "LB" version has a blunt tip for general use. "LB" VESION ITEM NUMBE A- WIDTH B-LENGTH L-OVEALL LENGTH +/- /3 +/- /3 +/- /8 3LB0400N " (,7) -5/' (33,3) 4" 3LB000N " (,7) -5/' (33,3) " "LP" VESION ITEM NUMBE A- WIDTH B-LENGTH L-OVEALL LENGTH +/- /3 +/- /3 +/- /8 3LP0400N " (,7) -5/' (33,3) 4" 3LP000N " (,7) -5/' (33,3) " egistered trade mark of the 3M Corporation. mpsales@microplastics.com micro plastics, inc. WEBSITE: 3

124 TABLE F OF CONTENTS WIE HANDLING HADWAE FINDEX A-Z VII Spiral Wrap is an ideal covering used to bundle and protect tubing, wires and other types of conductors. Spiral wrap can be used on virtually any item with a diameter of /" to 7". Polyethylene Natural Spiral Wrap is a lightweight low cost material that is good for general indoor applications. Polyethylene is not affected by ordinary solvents and is resistant to abrasion. Polyethylene spiral wrap is easy to install, either during production or after final assembly. Ultra Violet UV esistant Black Spiral Wrap is designed for outdoor use. Black UV esistant Spiral Wrap has all of the fine qualities of Natural Spiral Wrap with the additional advantage of containing an ultraviolet absorber. Black UV esistant Spiral Wrap will withstand direct sunlight for long periods of time. FOU PACKAGING THODS AE AVAILABLE FO SPIAL WAP. EFE TO THE CHAT ON THE OPPOSITE PAGE. NATUAL SPIAL WAP ITEM WALL BUNDLE NUMBE O.D. THICKNESS ANGE SPWNA /8".03 /" to " SPW4NA ".035 3/" to " SPW5NA ".040 3/" to " SPW3NA ".040 3/" to " SPW37NA ".05 5/" to 3" SPW38NA ".0 5/" to 3" SPW48NA ".030 " to 3" SPW49NA ".040 " to 4" SPW50NA ".0 " to 4" SPW5NA ".07 " to 4" SPWNA ".0 " to 4 " SPW75NA ".05 " to 5" SPW0NA ".070 " to 7" SPWNA ".095 " to 7" BLACK UV ESISTANT SPIAL WAP ITEM WALL BUNDLE NUMBE O.D. THICKNESS ANGE SPWBK /8".03 /" to " SPW4BK ".035 /" to " SPW5BK ".040 3/" to " SPW3BK ".040 5/" to 3" SPW37BK ".05 5/" to 3" SPW38BK ".0 5/" to 3" SPW48BK ".030 " to 3" SPW49BK ".040 " to 4" SPW50BK ".0 " to 4" SPW5BK ".07 " to 4" SPWBK ".0 " to 4 " SPW75BK ".05 " to 5" SPW0BK ".070 " to 7" SPWBK ".095 " to 7" 4 TELEPHONE: (870) 453- / micro plastics, inc. FAX: (870)

125 F OF CONTENTS WIE HANDLING HADWAE TABLE FINDEX A-Z Fluorescent Safety Wrap is an expandable plastic cable harness that can be used like tape. Designed with potentially hazardous situations in mind, Fluorescent Safety Wrap will help make loose wires, hanging cables, hoses and tubing more easily seen. VII IMPOVES APPEAANCE, SAFETY AND DUABILITY OF YOU PODUCTS. COLO CODES: ADD COLO CODES TO THE END OF EACH ITEM NUMBE TO SPECIFY COLO SELECTION. FLUOESCENT SAFETY WAP D = FLUOESCENT ED G = FLUOESCENT GEEN YW = FLUOESCENT YELLOW ITEM WALL BUNDLE NUMBE O.D. THK. ANGE SPWS /8".03 /" to " SPW4S ".035 3/" to " SPW5S ".040 3/" to " SPW3S ".040 5/" to 3" SPW37S ".05 5/" to 3" SPW49S ".040 " to 4" SPW50S ".0 " to 4" SPWS ".0 " to 4-" SPW75S ".05 " to 5" SPW0S ".070 " to 7" FOU PACKAGING THODS AE AVAILABLE FO SPIAL WAP. EFE TO THE CHAT BELOW. FO LAGE QUANTITY BULK SPOOL ODES, ADD THE LETTES SPL TO THE END OF THE PAT NUMBE. SPIAL WAP/FLUOESCENT SAFETY WAP, STANDAD PACKAGING OPTIONS SPIAL WAP CAN BE CUT TO ET SPECIAL LENGTH EQUIENTS, CALL FO DETAILS. (Best Pricing For Volume Users) OUTSIDE FEET PE FEET PE FEET PE FEET PE DIATE PAYOUT BOX POLYETHYLENE BAG SPOOL BULK SPOOL /8' 00' O 50' 00' O 50' 00' 500' " 00' O 50' 00' O 50' 00',000' " 00' O 50' 00' O 50' 00' 500' " 00' 50' 00' 50' " 5' 50' 00' 50' " 5' " 00' " " mpsales@microplastics.com micro plastics, inc. WEBSITE: 5

126 TABLE F OF CONTENTS WIE HANDLING HADWAE FINDEX A-Z VII Micro Plastics "EZ" Twist Lock Bundling Ties offers a fast, economical way to securely position and hold wire, cable or tubing. A single twist of the finger locks the bundle together. Another twist will open the lock to add or remove wire to the bundle.the reusable "EZ" Twist Lock is molded of tough, resilient Nylon / (UL 94V). The following standard sizes are available from stock in natural nylon. Dyed colors can be furnished with a slight extra charge. "EZ" TWIST LOCKS Other sizes will be tooled on request. ITEM NUMBE DESCIPTION H B 3EZ05N /8" LOCK.75 (8,). /.4 (,80 / 3,5) 3EZ050N " LOCK.875 (,).0 /.7 (5,08 /,8) 3EZ0375N " LOCK.08 (7,4).30 /.40 (7, / 0,) 3EZ0500N " LOCK.0 (30,5).40 /.50 (0, /.7) 3EZ000N " LOCK. (3,0).55 /.5 (3,9 /,5) 3EZ0750N " LOCK.55 (39,4).70 /.80 (7,8 / 0,3) 3EZ0950N 3EZ5N 3EZ375N 3EZ500N 3EZ750N 5/" LOCK /8" LOCK " LOCK " LOCK " LOCK.87 (47,5).7 (55,).7 (7,8).93 (74,4) 3.4 (87,9).90 /.00 (,8 / 5,4).0/.30 (30,5 / 33,0).45/.55 (3,8 / 39,4).55/.5 (39,4 / 4,9).90/.00 (48,3 / 50,8) DOUBLE "EZ" TWIST LOCKS ITEM NUMBE H L B AND B 3DBEZ000 - (9,8) /" (7,4).30/.40 (7,) / (0,) 3DBEZ000-3/3 (74,4) /" (7,4).40/.50 (0,) / (,70) "EZ" TWIST LOCK FIN CLIP BASE STANDAD LENGTH IS FOM BUNDLE DIATE TO TOP OF /3 PANEL ITEM BUNDLE TOTAL MOUNTING PANEL NUMBE DIATE LENGTH LENGTH HOLE ANGE 3EZF037B05 " (9,53).00 (5,08) -/3 (4,0).87 (4,75) /3 (0,79) - (,35) 3EZF037B037 " (9,53).35 (8,00) -5/3 (45,4).87 (4,75) /3 (0,79) - (,35) 3EZF037B050 " (9,53).437 (.0) -9/3 (48,4).87 (4,75) /3 (0,79) - (,35) 3EZF037B0 3EZF050C037 " (9,53) " (,70).555 (4,0).38 (8,08) -/3 (5,59) -9/3 (48,4).87 (4,75).50 (,35) /3 (0,79) - (,35) /3 (0,79) - (,35) 3EZF050C050 " (, (,35) -3/4 (50,39).50 (,35) /3 (0,79) - (,35) 3EZF050C0 3EZF050C00 " (,70) " (,70).59 (5,4).94 (3,93) -/8 (53,98) -5/3 (,7).50 (,35).50 (,35) /3 (0,79) - (,35) /3 (0,79) - (,35) 3EZF0C037 (5,88).39 (8,0) -5/ (49,).50 (,35) /3 (0,79) - (,35) 3EZF0C050 3EZF0C0 (5,88) (5,88).44 (,3).595 (5,) -3/4 (5,99) -3/ (55,5).50 (,35).50 (,35) /3 (0,79) - (,35) /3 (0,79) - (,35) 3EZF0C00 (5,88).935 (3,75) -35/4 (4,9).50 (,35) /3 (0,79) - (,35) TELEPHONE: (870) 453- / micro plastics, inc. FAX: (870)

127 TABLE HOLE SIZE.87 PANEL THICKNESS.030 /.078 "EZ" TWIST LOCK SUPPOTS F OF CONTENTS FINDEX A-Z WIE HANDLING HADWAE ITEM NUMBE DESCIPTION A B C 3EZS050N0954 3EZS0450N0030 3EZS000N0030 3EZS0375N0030 3EZS0450N05 3EZS05N BUNDLE DIA..450 BUNDLE DIA..00 BUNDLE DIA..375 BUNDLE DIA..450 BUNDLE DIA..5 BUNDLE DIA..954 (4.3).08 (0,7).0 (0,8).050 (,7).5 (5,88).08 (0,7) (,5) (9,97) (,44) (7,08) (30,07) (3,).7 (7,0).453 (,5).05 (5,).350 (8,89).453 (,5).0 (5,75) VII Micro Plastics "EZ" Twist Lock Printed Circuit Board Supports feature a uniquely designed locking base which is easily snapped into the chassis by hand. Cables and wires can be loaded and unloaded with a simple twist of the fingers, and are supported above the board eliminating possible contact with hot components. Parts are stocked in natural Nylon /. Other colors can be furnished with a slight extra charge. "EZ" TWIST LOCK SUPPOTS ITEM NUMBE DESCIPTION PANEL THICKNESS H W 3EZS050C BUNDLE DIA. / (,57) 7/8 (,3) 3/3 (8,4) 3EZS0375C BUNDLE DIA. / (,57) -5/4 (7,37) (9,08) 3EZS0500C BUNDLE DIA. / (,57) -3/4 (30,5) 7/8 (5,88) "EZ" TWIST LOCK SUPPOTS ITEM NUMBE DESCIPTION PANEL THICKNESS H W 3EZS050B BUNDLE DIA..047 (,9 /.09 (,77) 7/8 (,3) 3/3 (8,4) 3EZS0375B0040 3EZS0500B BUNDLE DIA..047 (,9 /.09 (,77).500 BUNDLE DIA..047 (,9 /.09 (,77) -5/4 (7,37) -3/4 (30,5) (9,08) 7/8 (5,88) mpsales@microplastics.com micro plastics, inc. WEBSITE: 7

128 TABLE F OF CONTENTS CICUIT BOAD HADWAE FINDEX A-Z VIII Accurately positions capacitors or discrete components on P.C. Board. Material: Type Nylon NYLON CAPACITO MOUNTS ITEM NUMBE DESCIPTION A B C D E F CM000 CM050 CM-00 CM (,54).50 (3,8).045 (,4).045 (,4).0 (0,5).0 (0,5).050/.070 (,7)/(,78).090/.5 (,9)/(3,8).80 (4,57).70 (,8).090 (,9).5 (3,8) CM000 CM (5,08).045 (,4).0 (0,5).090 (,9).90 (7,37).090 (,9) BOTH ENDS HOLE DIATE.5 PANEL THICKNESS /" NYLON P.C.B. SUPPOTS ITEM NUMBE DESCIPTION A 7MLLP087 MLLP (4,75) TWO - PIECE NYLON FASTENE FO USE WITH EDGE CONNECTO ASSEMBLY Body Item "A" is inserted through the connector and through the chassis. Pin Item "B" then is pushed or tapped into the body to secure the connector to the chassis. Head design of the pin permits easy removal, connector then can be easily replaced. BODY ITEM "A" ITEM NUMBE C D 7TPF000A.09 (,7).305 (7,74) 7TPF000A.0 (,79).350 (8,88) 7TPF0003A.0 (,79).480 (,9) 7TPF0004A.09 (,43).340 (8,3) PIN ITEM "B" ITEM NUMBE B A 7TPF000B.330 (8,38).09 (,75) 7TPF000B.30 (9,4).09 (,75) 7TPF0003B.455 (,55).09 (,75) 7TPF0004B.340 (8,3).0 (,57) 8 TELEPHONE: (870) 453- / micro plastics, inc. FAX: (870)

129 TABLE F OF CONTENTS FINDEX A-Z CICUIT BOAD HADWAE VIII NYLON LOCKING HEX SPACES ITEM NUMBE DESCIPTION A 7MPH007 MPH 7.7 (7,0) Economical Locking Spacers eliminate screws, nuts and lock washers in mounting P.C. boards on metal chassis or stacking in multiple tiers. Unique locking clips provide a mechanically secure, reusable connection in predrilled or punched holes while saving considerable assembly time. FITS HOLE SIZE OF.5 +/-.00 BOAD THICKNESS / FEMALE NYLON CICUIT BOAD POSTS ECOENDED HOLE SIZE.5 PANEL THICKNESS /" NOTE: SELF-THEADING POSTS AE DESIGNED FO USE WITH A # SELF-TAPPING SCEW. SELF-THEADING ITEM NUMBE DESCIPTION "L" 7FSTP0050* FSTP (,35) 7FSTP00375 FSTP (9,53) 7FSTP00500 FSTP (,70) 7FSTP005 FSTP 5.5 (5,88) 7FSTP00750 FSTP (9,05) 7FSTP00875 FSTP (,3) 7FSTP0000 FSTP (5,40) 7FSTP05 FSTP 5.5 (8,58) 7FSTP050 FSTP (3,75) 7FSTP040 FSTP (35,7) * " length has a thread depth of 3/4". THEADED ITEM NUMBE DESCIPTION "L" 7FTP0050* FTP (,35) 7FTP00375 FTP (9,53) 7FTP00500 FTP (,70) 7FTP005 FTP 5.5 (5,88) 7FTP00750 FTP (9,05) 7FTP00875 FTP (,3) 7FTP0000 7FTP05 7FTP050 7FTP040 FTP 000 FTP 5 FTP 50 FTP (5,40).5 (8,58).50 (3,75).40 (35,7) * " length has a thread depth of 3/4". mpsales@microplastics.com micro plastics, inc. WEBSITE: 9

130 TABLE F OF CONTENTS CICUIT BOAD HADWAE FINDEX A-Z VIII FITS ECOENDED HOLE SIZE OF.5 - PANEL THICKNESS /" NYLON LOCKING P.C.B. SUPPOT ON ADHESIVE BASE ITEM NUMBE DESCIPTION "L" 7LAD087 LAD (4,75) 7LAD050 LAD (,35) 7LAD0375 LAD (9,53) 7LAD0500 LAD (,70) 7LAD05 LAD 5.5 (5,88) 7LAD0750 LAD (9,05) 7LAD0875 LAD (,3) 7LAD000 LAD (5,40) 7LAD5 LAD 5.5 (8,5) MOLDED ACETAL IVETS ITEM NUMBE DESCIPTION SHANK A H LENGTH IV00 IV.085 (,).43 (3,3).058 (,47) /8 (3,8) IV00 IV.085 (,).43 (3,3).058 (,47) 3/ (4,7) IV003 IV (,).43 (3,3).058 (,47) (,35) IV004 IV (,).43 (3,3).058 (,47) 5/ (7,94) IV005 IV (,).43 (3,3).058 (,47) (9,53) IV00 IV.085 (,).43 (3,3).058 (,47) 7/ (,) IV007 IV (,).43 (3,3).058 (,47) (,70) IV0 IV.5 (3,8).50 (,35).08 (,73) /8 (3,8) IV0 IV.5 (3,8).50 (,35).08 (,73) 3/ (4,7) IV03 IV3.5 (3,8).50 (,35).08 (,73) (,35) IV04 IV4.5 (3,8).50 (,35).08 (,73) 5/ (7,94) IV05 IV5.5 (3,8).50 (,35).08 (,73) (9,53) IV0 IV.5 (3,8).50 (,35).08 (,73) 7/ (,) IV07 IV7.5 (3,8).50 (,35).08 (,73) (,70) IV08 IV8.5 (3,8).50 (,35).08 (,73) 9/ (4,9) IV09 IV9.5 (3,8).50 (,35).08 (,73) (5,88) IV00 IV0.5 (3,8).50 (,35).08 (,73) / (7,4) IV0 IV.5 (3,8).8 (5,54).090 (,9) /8 (3,8) IV0 IV.5 (3,8).8 (5,54).090 (,9) 3/ (4,7) IV03 IV3.5 (3,8).8 (5,54).090 (,9) (,35) IV04 IV4.5 (3,8).8 (5,54).090 (,9) 5/ (7,94) IV05 IV5.5 (3,8).8 (5,54).090 (,9) (9,53) IV0 IV.5 (3,8).8 (5,54).090 (,9) (,70) IV050 IV50.5 (3,8).55 (,48).05 (,30) (,35) IV055 IV55.5 (3,8).55 (,48.05 (,30) (9,53) 30 TELEPHONE: (870) 453- / micro plastics, inc. FAX: (870)

131 F OF CONTENTS CICUIT BOAD HADWAE TABLE FINDEX A-Z NYLON P.C.B. SUPPOTS "LOCK/TENSION" SEIES THE "LTP" SEIES IS DESIGNED TO SECUELY LOCK TO THE BOTTOM CHASSIS AND SNAP INTO TOP BOAD. VIII ITEM NUMBE DESCIPTION B 7LTP087 3/" LOCK/TENSION.307 (7,80) 7LTP050 " LOCK/TENSION.35 (9,7) 7LTP0375 7LTP0437 7LTP0500 7LTP05 7LTP0750 7LTP0875 7LTP000 7LTP5 7LTP50 7LTP375 7LTP750 " 7/" " " " 7/8" " /8" " " " LOCK/TENSION LOCK/TENSION LOCK/TENSION LOCK/TENSION LOCK/TENSION LOCK/TENSION LOCK/TENSION LOCK/TENSION LOCK/TENSION LOCK/TENSION LOCK/TENSION.495 (,57).557 (4,5).5 (5,88).745 (8,9).870 (,0).995 (5,7).0 (8,45).45 (3,).370 (34,80).495 (37,97).80 (45,97) Micro Plastics Circuit Board Supports eliminate screws nuts, and lockwashers in mounting printed circuit boards on metal chassis or stacking in multiple tiers. Unique locking designs provide mechanically secure, reusable connection in predrilled or punched holes while saving considerable assembly time and expense. NYLON P.C.B. SUPPOTS "LOCK/LOCK" SEIES THE "LLP" SEIES IS DESIGNED TO SECUELY LOCK BOTH THE CHASSIS END AND THE PINTED CICUIT BOAD ON TOP. ITEM NUMBE DESCIPTION B 7LLP05 /8 LOCK/LOCK. (5,33) 7LLP087 3" LOCK/LOCK.307 (7,80) 7LLP050 " LOCK/LOCK.35 (9,7) 7LLP0375 " LOCK/LOCK.495 (,57) 7LLP0437 7/" LOCK/LOCK.557 (4,5) 7LLP0500 " LOCK/LOCK.5 (5,88) 7LLP05 " LOCK/LOCK.745 (8,9) 7LLP0750 " LOCK/LOCK.870 (,0) 7LLP0875 7/8" LOCK/LOCK.995 (5,7) 7LLP000 " LOCK/LOCK.0 (8,45) 7LLP5 /8" LOCK/LOCK.45 (3,) 7LLP50 " LOCK/LOCK.370 (34,80) 7LLP375 " LOCK/LOCK.495 (37,97) 7LLP750 " LOCK/LOCK.80 (45,97) mpsales@microplastics.com micro plastics, inc. WEBSITE: 3

132 TABLE F OF CONTENTS CICUIT BOAD HADWAE FINDEX A-Z VIII HOLE SIZE.5 PANEL THICKNESS /" NYLON MALE P.C.B. SUPPOT POSTS "LOCKING" SEIES HOLE SIZE.5 PANEL THICKNESS /" *THEAD LENGTH IS /3" NYLON MALE P.C.B. SUPPOT POSTS "MTP" SEIES ITEM NUMBE DESCIPTION A ITEM NUMBE DESCIPTION L 7LMTP0050 LMTP (,35) 7MTP005 MTP 5.5 (3,8) 7LMTP00375 LMTP (9,53) 7MTP0087 MTP (4,75) 7LMTP00500 LMTP (,70) 7MTP0050 MTP (,35) 7LMTP005 LMTP 5.5 (5,88) 7MTP00375 MTP (9,53) 7LMTP00750 LMTP (9,05) 7MTP00395* MTP (0,03) 7LMTP00875 LMTP (,3) 7MTP00500 MTP (,70) 7LMTP0000 LMTP (5,40) 7MTP005 MTP 5.5 (5,88) 7LMTP05 LMTP 5.5 (8,58) 7MTP00750 MTP (9,05) 7MTP00875 MTP (,3) Micro Plastics' Printed Circuit board Support Guides are an economical and fast solution to mount P.C. Boards. Card insertion is simple and fast. The smooth positive channel guides the P.C. Board and firmly supports and protects the board. Guides are molded of tough, electrically insulating nylon / and are designed to snap into pre-punched holes in the chassis. Micro Plastics has available the eight most popular sizes. Other sizes will be tooled on request. NYLON P.C. BOAD CAD GUIDES The Printed Circuit Board Card Guide is designed to fit a.5" +.003" -.00" front diameter hole and a.0"+/-.005" x.8" slot rear hole. ITEM NUMBE DESCIPTION A B CGS0050 " GUIDE.5.0 CGS " GUIDE CGS " GUIDE CGS " GUIDE CGS " GUIDE CGS GUIDE CGS " GUIDE CGS0000 " GUIDE TELEPHONE: (870) 453- / micro plastics, inc. FAX: (870)

133 TABLE F OF CONTENTS FINDEX A-Z CICUIT BOAD HADWAE Economical locking spacers eliminate screws, nuts and lock washers in mounting P.C. Boards on metal chassis or stacking in multiple tiers. Unique locking clips provide a mechanically secure, reusable connection in predrilled or punched holes while saving considerable assembly time. The new improved "MSP" series greatly increases stability and integrity of the printed circuit board assembly, while improving the pullout strength of the connection. VIII NYLON P.C.B. POSTS "MP" SEIES ITEM NUMBE DESCIPTION "A" 7MP005 MP 5.5 (3,8) 7MP0050 MP (,35) 7MP003 MP 3.3 (7,9) 7MP00375 MP (9,53) 7MP00437 MP (,) * 7MP00437S MP 437S.437 (,) 7MP00500 MP (,70) 7MP005 MP 5.5 (5,88) 7MP00750 MP (9,05) 7MP00875 MP (,3) 7MP0000 MP (5,40) 7MP0950 MP (49,53) PATS CAN BE FUNISHED COLO CODED FO IDENTIFICATION. ECOENDED HOLE SIZE.5" +/-.00" PANEL THICKNESS /" NYLON P.C.B. POSTS "MSP" SEIES ITEM NUMBE DESCIPTION A 7MSP005 7MSP005 7MSP0050 7MSP003 7MSP00375 MSP 5 MSP 5 MSP 50 MSP 3 MSP (3,8) (3,9) (,35) (7,9) (9,53) 7MSP MSP MSP005 7MSP MSP MSP MSP0000 7MSP0800 MSP 437 MSP 500 MSP 5 MSP 700 MSP 750 MSP 875 MSP000 MSP (,).500 (,70).5 (5,88).700 (7,78).750 (9,05).875 (,3).00 (5,40).80 (45,7) NYLON KEY-SLOT P.C.B. POSTS ITEM NUMBE DESCIPTION A 7KYP0087 KYP 87 3/ (4,8) 7KYP0050 KYP 50 (,4) 7KYP00375 KYP 375 (9,5) 7KYP00500 KYP 500 (,7) 7KYP005 KYP 5 (5,9) 7KYP00750 KYP 750 (9,) 7KYP00875 KYP 875 7/8 (,) 7KYP0000 KYP 000 (5,4) For use in combination with a key-slot hole so that the circuit board may be removed for repairs. mpsales@microplastics.com micro plastics, inc. WEBSITE: 33

134 TABLE F OF CONTENTS CICUIT BOAD HADWAE FINDEX A-Z VIII NYLON P.C.B. SUPPOTS "LCSP" SEIES ITEM NUMBE DESCIPTION "A" 7LCSP005 LCSP 5.5 (3,8) 7LCSP0050 LCSP (,35) 7LCSP003 LCSP 3.3 (7,9) 7LCSP00375 LCSP (9,53) 7LCSP00437 LCSP (,) 7LCSP00500 LCSP (,70) 7LCSP005 LCSP 5.5 (5,88) 7LCSP00750 LCSP (9,05) 7LCSP00875 LCSP (,3) 7LCSP0000 LCSP (5,40) SPING END FITS.5" HOLE LOCK O TENSION END FITS.5" HOLE PANEL THICKNESS / NYLON P.C.B. SUPPOTS "TCSP" SEIES ITEM NUMBE DESCIPTION "A" 7TCSP005 7TCSP0050 7TCSP003 7TCSP TCSP TCSP TCSP005 7TCSP TCSP TCSP0000 TCSP 5 TCSP 50 TCSP 3 TCSP 375 TCSP 437 TCSP 500 TCSP 5 TCSP 750 TCSP 875 TCSP (3,8).50 (,35).3 (7,9).375 (9,53).437 (,).500 (,70).5 (5,88).750 (9,05).875 (,3).000 (5,40) NYLON P.C.B. SUPPOTS "LMSP" SEIES ITEM NUMBE DESCIPTION "A" 7LMSP005 LMSP 5.5 (3,8) 7LMSP0050 LMSP (,35) 7LMSP003 LMSP 3.3 (7,9) 7LMSP00375 LMSP (9,53) 7LMSP00437 LMSP (,) 7LMSP00500 LMSP (,70) 7LMSP005 LMSP 5.5 (5,88) 7LMSP00750 LMSP (9,05) 7LMSP00875 LMSP (,3) 7LMSP0000 LMSP (5,40) SPING END FITS.5" HOLE LOCK O TENSION END FITS.5" HOLE PANEL THICKNESS / NYLON P.C.B. SUPPOTS "TMSP" SEIES ITEM NUMBE DESCIPTION "A" 7TMSP005 TMSP 5.5 (3,8) 7TMSP0050 TMSP (,35) 7TMSP003 TMSP 3.3 (7,9) 7TMSP00375 TMSP (9,53) 7TMSP00437 TMSP (,) 7TMSP00500 TMSP (,70) 7TMSP005 TMSP 5.5 (5,88) 7TMSP00750 TMSP (9,05) 7TMSP00875 TMSP (,3) 7TMSP0000 TMSP (5,40) 34 TELEPHONE: (870) 453- / micro plastics, inc. FAX: (870)

135 TABLE F OF CONTENTS FINDEX A-Z CICUIT BOAD HADWAE "LSP" SEIES - MSP END FITS A.5" HOLE LOCKING END FITS.87" HOLE PANEL THICKNESS.030 /.078 VIII "DLP" SEIES - BOTH ENDS FIT A.87" HOLE PANEL THICKNESS.030 /.078 NYLON P.C.B. SUPPOTS "LSP" SEIES NYLON P.C.B. SUPPOTS "DLP" SEIES ITEM NUMBE DESCIPTION "A" * ITEM NUMBE DESCIPTION "A" * 7LSP0087 LSP (7,80) 7DLP0087 DLP (7,80) 7LSP0050 LSP (9,7) 7DLP0050 DLP (9,7) 7LSP00375 LSP (,57) 7DLP00375 DLP (,57) 7LSP00437 LSP (4,5) 7DLP00437 DLP (4,5) 7LSP00500 LSP (5,88) 7DLP00500 DLP (5,88) 7LSP005 LSP (8,9) 7DLP005 DLP (8,9) 7LSP00750 LSP (,0) 7DLP00750 DLP (,0) 7LSP00875 LSP (5,7) 7DLP00875 DLP (5,7) 7LSP0000 LSP (8,45) 7DLP0000 DLP (8,45) 7LSP05 LSP 5.45 (3,) 7DLP05 DLP 5.45 (3,) 7LSP050 LSP (34,80) 7DLP050 DLP (34,80) 7LSP0375 LSP (37,97) 7DLP0375 DLP (37,97) * EQUAL TO THE DISTANCE BETWEEN PANELS * EQUAL TO THE DISTANCE BETWEEN PANELS "DSP" SEIES - BOTH ENDS FITS A.5" HOLE "DMSP" SEIES - BOTH ENDS FIT A.5" HOLE "DSP" SEIES ITEM NUMBE DESCIPTION "A" 7DSP005 DSP 5.5 (3,8) 7DSP0050 DSP (,35) 7DSP000 DSP 0.0 (,0) 7DSP003 DSP 3.3 (7,9) 7DSP00375 DSP (9,53) 7DSP00437 DSP (,) 7DSP00500 DSP (,70) 7DSP005 DSP 5.5 (5,88) 7DSP00750 DSP (9,05) 7DSP00788 DSP (0,0) 7DSP00875 DSP (,3) 7DSP0000 DSP (5,40) 7DSP050 DSP (3,75) PANEL THICKNESS / "DMSP" SEIES ITEM NUMBE DESCIPTION "A" 7DMSP005 DMSP 5.5 (3,8) 7DMSP0050 DMSP (,35) 7DMSP003 DMSP 3.3 (7,9) 7DMSP00375 DMSP (9,53) 7DMSP00437 DMSP (,) 7DMSP00500 DMSP (,70) 7DMSP005 DMSP 5.5 (5,88) 7DMSP00750 DMSP (9,05) 7DMSP00875 DMSP (,3) 7DMSP DMSP0000 DMSP 950 DMSP (4,3).000 (5,40) mpsales@microplastics.com micro plastics, inc. WEBSITE: 35

136 TABLE F OF CONTENTS CICUIT BOAD HADWAE FINDEX A-Z VIII Simplify power transistor mountings and insulation, and improve thermal efficiency with molded insulators. These insulators are molded of Type Nylon for regular applications and of Glass FIlled Polyester for heavy-duty uses. They replace up to six pieces of conventional insulation required with previous mountings. They also increase the amount of interface surface between device and sink by minimizing clearance holes required for all feed-thru connectors. They also have a built-in barrier which not only eliminates need for sleeving of base and emitter connections but also serves as an assembly aid during installation. STANDAD POWE TANSISTO MOUNTS PTI- for TO-3 ITEM NUMBE 9PTI 8PTIWOB DESCIPTION PTI- PTI- W/O BAIE STANDAD POWE TANSISTO MOUNTS PTI- for TO- ITEM NUMBE 9PTI 8PTIWOB DESCIPTION PTI- PTI- W/O BAIE HEAVY DUTY POWE TANSISTO MOUNTS PTI--H for TO-3 ITEM NUMBE 0PTIHD 8PTIHDWOB DESCIPTION PTI- HD PTI- HD W/O BAIE HEAVY DUTY POWE TANSISTO MOUNTS ITEM NUMBE 0PTIHD 8PTIHDWOB PTI--H for TO- DESCIPTION PTI- HD PTI- HD W/O BAIE 3 TELEPHONE: (870) 453- / micro plastics, inc. FAX: (870)

137 TABLE F OF CONTENTS FINDEX A-Z CICUIT BOAD HADWAE Micro Plastics' Power Transistor Covers are available in bothto-3 and TO- configurations. Both hole,5 hole and no hole styles are offered. Transistor covers are stocked in Nylon /. Other materials are available upon request. VIII POWE TANSISTO COVES TO-3 ITEM NUMBE DESCIPTION PTC003 PTC 03-N HOLE PTC0 PTC03-N 5 HOLE PTC0033 PTC 03-ON NO HOLE POWE TANSISTO COVES TO- ITEM NUMBE DESCIPTION PTC00 PTC0-N -HOLE PTC00 PTC0-N 5-HOLE PTC003 PTC0-ON NO HOLE EVESE LOCKING CICUIT BOAD SUPPOTS ITEM NUMBE DESCIPTION A B C D 7V0050 V (9,53) /3 (8,7).50 (,35).00 (,5) 7V00375 V (9,53) /3 (8,7).375 (9,53).00 (,5) EVESE LOCKING CICUIT BOAD SUPPOT STANDOFF ITEM NUMBE DESCIPTION HEAD DIA. BODY DIA. HEAD HEIGHT HOLE SIZE A 7VS00500 VS (9,53).50 (3,8).045 (,4).78 (4,5).500 (,70) mpsales@microplastics.com micro plastics, inc. WEBSITE: 37

138 TABLE F OF CONTENTS FINDEX A-Z HOSE CLAMPS AND INSTALLATION TOOLS IX - APPLIANCE - Dishwashers, laundry, refrigerators, food preparation equipment. - ELECTICAL/ELECTONIC - Positioning and placement of components and wiring. -.V./BOATING - Plumbing and Accessories. - AUTOMOTIVE - Underhood applications, Heat-Stabilized material is available, call for details. Micro Plastics Premium Nylon Hose Clamps provide a superior seal on hose or tubing through their Patented interlocking design by eliminating the leak path created by the overlapping ring design hose clamps. As interlocking groves are ratcheted together the sealing diameter of the fastener is aligned in parallel, creating a uniform clamping surface. Clamps may be removed by separating the clamping halves in a perpendicular direction at the seal. Easy installation on most liquid, gas, or vacuum lines. Nylon clamps are tough, corrosion resistant and resilient. Parts are removable and reusable. PEMIUM NYLON HOSE CLAMPS PATENTED INTELOCKING DESIGN ELIMINATES LEAK PATH CLAMPING ANGE ITEM NUMBE DESCIPTION A B MIN. MAX HC050 " Hose Clamp 7/3" (5,5) /" (,59).4 (,5).90 (7,37) HC03 5/" Hose Clamp 7/3" (5,5) 3/4" (,9).300 (7,).350 (8,89) HC0344 /3" Hose Clamp 7/3" (5,5) /" (,59).30 (9,4).40 (0,3) HC040 HC048 HC053 HC0593 HC07 HC0750 HC0875 3/3" 5/3" 7/3" 9/3" 43/4" " 7/8" Hose Clamp Hose Clamp Hose Clamp Hose Clamp Hose Clamp Hose Clamp Hose Clamp " 7/3" " " 7/3" 7/3" 7/3" (,35) (5,5) (,35) (,35) (5,5) (5,5) (5,5) /" (,59) /" (,59) /" (,59) /" (,59) /" (,59) /" (,59) /" (,59).40 (0,4).475 (,07).538 (3,7).597 (5,).70 (7,0).730 (8,54).870 (,0).48 (,89).53 (3,).08 (5,44).5 (,89).780 (9,8).830 (,08).975 (4,77) HC0953 HC03 HC50 /4" -/3" -" Hose Clamp Hose Clamp Hose Clamp " 5/" 5/" (,35) (7,94) (7,94) /" (,59) /" (,59) /" (,59).953 (4,).093 (7,7).03 (,9).87 (30,5).50 (3,75).45 (3,0) HC40 HC593 HC87 HC875 HC5-3/3" -9/3" -/" -7/8" -/8" Hose Clamp Hose Clamp Hose Clamp Hose Clamp Hose Clamp /3" (8,73) /3" (8,73) /3" (8,73)) 3/3" (0,3) 3/3" (0,3) /" (,59) /" (,59) /" (,59) /" (,59) /" (,59).40 (35,7).0 (40,89).593 (40,4).8 (4,0).790 (45,47).0 (53,59).870 (47,50).5 (53,98).0 (53,85).390 (0,7) STANDAD HOSE CLAMPS FIN CLIP BASE CLAMPING ANGE ITEM NUMBE A B MIN. MAX HCFC03788 HCFC (5,84).50 (,35).070 (,78).070 (,78).30 (9,4).395 (0,03).990 (5,5).35 (8,83) 38 mpsales@microplastics.com micro plastics, inc. WEBSITE:

139 TABLE F OF CONTENTS FINDEX A-Z HOSE CLAMPS AND INSTALLATION TOOLS - APPLIANCE - Dishwashers, laundry, refrigerators, food preparation equipment. - ELECTICAL/ELECTONIC - Positioning and placement of components and wiring. IX -.V./BOATING - Plumbing and Accessories. - AUTOMOTIVE - Underhood applications, Heat-Stabilized material is available, call for details. Micro Plastics Standard Nylon Hose Clamps are based on the original design for this type of fastener. A overlapping tapered ring of nylon is fastened around the hose or tubing desired and secured to the required tightness by compressing interacting groves in a ratcheting fashion, creating a tight sealing application. Clamps may be removed by separating the clamping halves in perpendicular direction at the seal. STANDAD NYLON HOSE CLAMPS CLAMPING ANGE ITEM NUMBE DESCIPTION A B MIN. MAX HSC005.5 Hose Clamp.50 (3,8).070 (,78).307 (7,80).34 (8,9) HSC000 Hose Clamp.30 (.5,84).070 (,78).30 (9,4).395 (0,03) HSC Hose Clamp.30 (5,84).070 (,78).404 (0,).45 (,48) HSC000 Hose Clamp.30 (5,84).070 (,78).449 (,70).5 (,98) HSC Hose Clamp.30 (5,84).070 (5,84).53 (3,03).58 (4,88) HSC000 0 Hose Clamp.30 (5,84).070 (,78).59 (4,45).50 (,5) HSC00 Hose Clamp.30 (5,84).070 (,78). (5,5).707 (7,9) HSC040 4 Hose Clamp.30 (5,84).070 (,78).70 (7,83).80 (0,35) HSC080 8 Hose Clamp.30 (5,84).070 (,78).779 (9,79).899 (,83) HSC090 9 Hose Clamp.30 (5,84).070 (,78).859 (,8).989 (5,) HSC00 Hose Clamp.50 (,35).070 (,78).98 (3,57).07 (7,3) HSC040 4 Hose Clamp.50 (,35).070 (,78).990 (5,5).35 (8,83) HSC080 8 Hose Clamp.80 (7,).070 (,78).3 (8,5).9 (3,9) Nylon clamps are tough, corrosion resistant and resilient. Parts are removable and reusable. HOSE CLAMP INSTALLATION TOOLS Micro Plastics' Pneumatic -Ergonomic Hose Clamp Installation Tool has been carefully designed to help reduce the wrist fatigue associated with the rapid assembly of Nylon Hose Clamps. The easy trigger-type actuation of this air tool, in combination with the ergonomic angle of the hand grip, allows natural alignment of the wrist and hand during normal clamp installation. The tool operates on standard shop air from PSE. Lightweight, only 8 ounces. Tools are configured prior to shipping. Please specify Hose Clamp sizes to be installed when ordering. NOT AVAILABLE FO HOSE CLAMP SIZES LAGE THAN.953 PNEUMATIC HOSE CLAMP TOOL ITEM NUMBE PHCT000 PNEUMATIC EGONOMIC HOSE CLAMP TOOL ITEM NUMBE PHCET000 PATENT PENDING TELEPHONE (50) / 453- micro plastics, inc. FAX (50)

140 TABLE F OF CONTENTS FINDEX A-Z CABLE TIES AND MOUNTING HADWAE X Manufactured from tough, durable Nylon / material which is self extinguishing to U.L. 94V. The Nylon is inert to fungus or mold and is resistant to petrols, oil, grease and alkalis, etc. Ties can be tensioned by hand or by the use of applied tensioning tools. CABLE TIES For ties packaged,000 per bag, change the C at the end of the part number to an M. MINIATUE ANGE PAT NUMBE NATUAL BLACK NT0805C NT0805CB NT005C NT005CB NT05C NT05CB NT005C NT005CB ETS WITH THE EQUIENT OF MIL-S-390E LENGTH STANDAD TIC WIDTH STANDAD TIC Ties are offered in Natural and Black Nylon. Ties are packaged 00 per bag. MAX. DIATE STANDAD TIC MIN. STENGTH STANDAD TIC 8 lb. 8. kg 8 lb. 8. kg 8 lb. 8. kg 8 lb. 8. kg INTEDIATE ANGE PAT NUMBE NATUAL BLACK NT403C NT403CB NT003C NT003CB NT953C NT953CB LENGTH STANDAD TIC WIDTH STANDAD TIC MAX. DIATE STANDAD TIC MIN. STENGTH STANDAD TIC 40 lb. 8. kg 40 lb. 8. kg 40 lb. 8. kg STANDAD ANGE PAT NUMBE NATUAL BLACK NT048C NT048CB NT8048C NT8048CB NT0048C NT0048CB NT5048C NT5048CB NT9548C NT9548CB NT37048C NT37048CB LENGTH STANDAD TIC WIDTH STANDAD TIC MAX. DIATE STANDAD TIC MIN. STENGTH STANDAD TIC 50 lb.. kg 50 lb.. kg 50 lb.. kg 50 lb.. kg 50 lb.. kg 50 lb.. kg LIGHT HEAVY ANGE PAT NUMBE NATUAL BLACK NT507C NT507CB NT007C NT007CB NT907C NT907CB NT3707C NT3707CB LENGTH STANDAD TIC WIDTH STANDAD TIC MAX. DIATE STANDAD TIC MIN. STENGTH STANDAD TIC 0 lb kg 0 lb kg 0 lb kg 0 lb kg 40 HIGHWAY 78 NOTH micro plastics, inc. FLIPPIN, AKANSAS 734

141 TABLE F OF CONTENTS FINDEX A-Z CABLE TIES AND MOUNTING HADWAE CABLE TIE INSTALLATION TOOLS X STANDAD TAL TENSIONING TOOLS ITEM NUMBE NTTOOLMHD FO USE CABLE TIE WIDTHS FOM.89 TO.5 STANDAD ADJUSTABLE NYLON TENSIONING TOOLS ITEM NUMBE NTT00LI STANDAD ADJUSTABLE TAL TENSIONING TOOLS ITEM NUMBE NTT00LMI FO USE CABLE TIE WIDTHS FOM.087 TO.89 FO USE CABLE TIE WIDTHS FOM.087 TO.89 FIN CLIP PUSH MOUNTS Fin clip push mounts are available in sizes for 3/ and diameter holes. The special head configuration allows use with beaded ties, as well as conventional cable ties. parts are molded in black U.V. stabilized high density polyethylene, and are suitable for use in pre-drilled holes in wood, masonry, and a variety of other materials. ITEM NUMBE 3FCPM875 DESCIPTION 3/ PUSH MOUNT TOLEANCE +/-.05 ITEM NUMBE DESCIPTION 3TA0000 3FCPM5095 # 8 SCEW TABPUSH MOUNT mpsales@microplastics.com micro plastics, inc. WEBSITE: 4

142 TABLE F OF CONTENTS FINDEX A-Z CABLE TIES AND MOUNTING HADWAE X CLIP MOUNTS Clip Mounts are designed to securely connect a tie to a predrilled hole. Clip Mounts can be used in applications where the back of the panel is inaccessible. ITEM NUMBE 3TA0000 3TA000 DESCIPTION.87 (4,75) CLIP MOUNT.50 (,35) CLIP MOUNT ITEM NUMBE 3TA000 DESCIPTION.50 (,35) CLIP MOUNT SCEW TABS Screw Tabs are designed for use where space is limited. Tabs are fastened with a screw to provide a low profile assembly. ITEM NUMBE 3TA0000 DESCIPTION #8 SCEW TAB ITEM NUMBE 3TA0050 DESCIPTION " (,35) SCEW TAB CADLE MOUNTS Cradle Mounts are used in applications where a low profile is necessary. Each mount offers a four way entry and is secured with either a screw or adhesive backing. 3TA00400 is secured with a # - #4 or # screw, 3TA00495 uses # Flat Head Screw. NOTE: the adhesive mounts have an acrylic foam backing that should be used on a smooth, clean, dry surface. ITEM NUMBE DESCIPTION 3TA TA0040 " (5,40) CADLE MOUNT (AHESIVE) " (5,40) CADLE MOUNT (SCEW) ITEM NUMBE DESCIPTION 3TA TA00495 " (9,05) CADLE MOUNT (ADHESIVE) " (9,05) CADLE MOUNT (SCEW) 4 TELEPHONE: (870) 453- / micro plastics, inc. FAX: (870)

143 TABLE F OF CONTENTS FINDEX A-Z FASTENE ASSOTNT KITS MOLDED NYLON FASTENES POVIDE ELECTICAL INSULATION, VIBATION AND COOSION ESISTANCE. HAVE A LOW THEMAL CONDUCTIVITY, AE XI NON-MAGNETIC AND HAVE A HIGH STENGTH-TO- WEIGHT ATIO. PACKAGED IN LAGE EUSABLE TANS- PAENT PLASTIC STOAGE BOXES. IDEAL FO: POTOTYPE WOK - Large working assortments. PODUCT DESIGN - Latest designs for increased productivity. MODEL MAKING - Commercially available standard parts. SHOP AND MAINTENANCE - Convenient selection. # O4ASO475HC # O4ASOO75S # O4ASO8OTCH STAIN ELIEF BUSHINGS ASSOTNT CONSISTS OF APPOXIMATELY: 0-3MP0M40-3MP03P40 0-3MP04K40 0-3MP04N40 0-3MP05P40 4-3MP0N40-3MP0P34-3MP0W0-3MP07W0-3MP MP4L0 8-3MP5L0 Over 00 Transistor Covers Transistor and Capacitor Mounts in 7 Different Styles and Configurations TANSISTO HADWAE ASSOTNT CONSISTS OF APPOXIMATELY: - 9PTI - 9PTI - 9PTIHD - 9PTIHD - 9PTIWOB - 9PTIWOB - 9PTIHDWOB - 9PTIHDWOB 4 - PTC PTC0 4 - PTC PTC PTC00 - PTC CM CM CM000 PEMIUM HOSE CLAMPS ASSOTNT CONSISTS OF APPOXIMATELY: 50 - HC HC HC HC HC HC HC HC HC HC HC HC HC HC HC HC5 mpsales@microplastics.com micro plastics, inc. WEBSITE: 43

144 TABLE F OF CONTENTS FASTENE ASSOTNT KITS FINDEX A-Z MOLDED NYLON FASTENES POVIDE ELECTICAL INSULATION, VIBATION AND XI COOSION ESISTANCE. HAVE A LOW THEMAL CONDUCTIVITY, AE NON-MAGNETIC AND HAVE A HIGH STENGTH-TO- WEIGHT ATIO. PACKAGED IN LAGE EUSABLE TANS- PAENT PLASTIC STOAGE BOXES. # O4ASO9OOFAS # O4ASO3OSWS IDEAL FO: POTOTYPE WOK - Large working assortments. PODUCT DESIGN - Latest designs for increased productivity. MODEL MAKING - Commercially available standard parts. SHOP AND MAINTENANCE - Convenient selection. # O4ASO75OMSN Over 750 Nylon Fasteners Over 40 Different Sizes and Types SCEWS AND NUTS ASSOTNT CONSISTS OF APPOXIMATELY: OUND, HEX, PAN, BINDE, AND FILLISTE HEADSTYLE MACHINE SCEWS. IN THE FOLLOWING SIZES; 00 - X " to " LONG ASSOTED HEADSTYLES 00-3 X " to " LONG ASSOTED HEADSTYLES 00 - X " to " LONG ASSOTED HEADSTYLES 00 - X " to " LONG ASSOTED HEADSTYLES 30 - X " to "LONG OUND and FILLISTE HEAD 00 -,,,, & SOCKET SET SCEWS 00 -,,,, & HEX NUTS 5 - #4, #, #8, #0, & FLATWASHES Over 900 Nylon Fasteners Over 5 Different Sizes and Types. FASTENES 50 MOLDED NYLON SCEWS Assorted sizes and headstyles; ound, Pan, Fillister, Flat, Binder, Hex and Set SOCKET SET SCEWS 50 - POLY DIVE IVETS 00 - FLAT WASHES 00 - HEX NUTS 50 - LOCK NUTS 40 - CAP NUTS 0 - WING NUTS 50 - PUSH-IN FASTENES 50 - AOW CLIPS 00 - SCEW INSULATOS 0 - THUMB SCEWS # O4ASO38OPT Over 380 Assorted Nylon Drive ivets with Insertion Tool POLY DIVE IVETS ASSOTNT CONSISTS OF APPOXIMATELY: 40 - P / P / P / P / P / P / P / P / P / P /.3 - PT05 DIVE IVET INSETION TOOL All in Assorted Lengths and Shoulder Height Combinations. SHOULDE WASHES ASSOTNT CONSISTS OF APPOXIMATELY: 50 - SHOULDE WASHES.093 to " ID.5 to.500 OD 30 - # SCEW INSULATOS 30 - #4 SCEW INSULATOS 5 - # SCEW INSULATOS 5 - #8 SCEW INSULATOS 5 - #0 SCEW INSULATOS 5 - SCEW INSULATOS 0-5/ SCEW INSULATOS NAIL-IN CLIPS # O4ASO58NIC Over 500 Nail-In Clips In Different Sizes and Types. ASSOTNT CONSISTS OF APPOXIMATELY: 55 - NCCO400 4mm 75 COAX 55 - NCCO450F 4.5 BELL 5 - NCCO500 5mm G NCCO700 7mm G- 5 - NCO800F 8 59 TIAX 45 - NCCO900F 9 DUAL G- 44 TELEPHONE: (870) 453- / micro plastics, inc. FAX: (870)

145 TABLE F OF CONTENTS FINDEX A-Z FASTENE ASSOTNT KITS # O4ASOCA # O4ASO9OCC MOLDED NYLON FASTENES POVIDE ELECTICAL INSULATION, VIBATION AND XI COOSION ESISTANCE. HAVE A LOW THEMAL CONDUCTIVITY, AE NON-MAGNETIC AND HAVE A HIGH STENGTH-TO- WEIGHT ATIO. PACKAGED IN LAGE EUSABLE TANS- PAENT PLASTIC STOAGE BOXES. IDEAL FO: POTOTYPE WOK - Large working assortments. PODUCT DESIGN - Latest designs for increased productivity. MODEL MAKING - Commercially available standard parts. SHOP AND MAINTENANCE - Convenient selection. Over 50 Cable Clips in Popular Sizes Including; Nail-in Clips, Heavy Duty Clips, Wire Clips and Spring Clips. CLIPS ASSOTNT CONSISTS OF APPOXIMATELY: 5 - NCC0450F 0 - NCC0900F 5 - NCC NCCO NCCO400 - WCO SPC HDCC HDCC HDCC HDCC NCC0500 # O4ASO34OSP CABLE CLAMPS Over 90 Cable Clamps in 8 Popular Sizes. ASSOTNT CONSISTS OF APPOXIMATELY: 40 - /8" X /8" CABLE CLAMPS 5-3/" X " CABLE CLAMPS " X " CABLE CLAMPS " X " CABLE CLAMPS 0-5/" X " CABLE CLAMPS " X " CABLE CLAMPS 7/" X " CABLE CLAMPS " X " CABLE CLAMPS 5-5/" X " CABLE CLAMPS " X " CABLE CLAMPS 7/" X " CABLE CLAMPS 0 - " X " CABLE CLAMPS 9/" X " CABLE CLAMPS " X " CABLE CLAMPS "X " CABLE CLAMPS 5 - " X " CABLE CLAMPS 3 - " X " CABLE CLAMPS " X " CABLE CLAMPS # O4ASO3O5MCS # O4ASOO7ABC Over 00 Adhesive Backed Cable Clips in 0 Sizes including Single, Double and eleasable Styles. ADHESIVE BACKED CLIPS ASSOTNT CONSISTS OF APPOXIMATELY: 0 - AWCOO AWC DPC DPC DPC SPC DPC SPC SPC SPC5550 SPACES/STANDOFFS ASSOTNT CONSISTS OF APPOXIMATELY: 00 - OUND SPACES - PLAIN 3/", ", ", " DIATES, /8" to " Long HEX SPACES - PLAIN " to " Long OUND SPACES - TAPPED,,,,, ", 5/", ", " Diameter, " to " Long HEX SPACES - TAPPED,,, Diameter, " to " Long HEX MALE/FEMALE STANDOFFS - THEADED,, Diameter, " to " Long. Over 300 NYLON TAL COE SCEWS Over 30 Different Sizes and Headstyles. TAL COE SCEWS ASSOTNT CONSISTS OF APPOXIMATELY: ALL IN ASSOTED OUND, OUND WASHE, FLAT AND FILLISTE HEADSYTLES X " to " TAL COE SCEWS 75 - X " to " TAL COE SCEWS 0 - X " to " TAL COE SCEWS 40 - X " to " TAL COE SCEWS mpsales@microplastics.com micro plastics, inc. WEBSITE: 45

146 TABLE F OF CONTENTS FASTENE ASSOTNT KITS FINDEX A-Z MOLDED NYLON FASTENES POVIDE ELECTICAL INSULATION, VIBATION AND XI COOSION ESISTANCE. HAVE A LOW THEMAL CONDUCTIVITY, AE NON-MAGNETIC AND HAVE A HIGH STENGTH-TO- WEIGHT ATIO. PACKAGED IN LAGE EUSABLE TANS- PAENT PLASTIC STOAGE BOXES. IDEAL FO: POTOTYPE WOK - Large working assortments. PODUCT DESIGN - Latest designs for increased productivity. MODEL MAKING - Commercially available standard parts. SHOP AND MAINTENANCE - Convenient selection. # O4ASO4OCC # O4ASO38DHP # O4ASO48OCBS CICUIT BOAD SUPPOTS ASSOTNT CONSISTS OF APPOXIMATELY: 5-7LTP LLP LTP50 5-7LLP50 5-7LTP LLP LTP LLP LTP LLP LTP LLP LTP LLP LTP LLP LTP LLP LTP LLP LTP05 0-7LLP05 Over 40 Cable Clips In 5 Different Styles & Sizes CABLE CLIPS ASSOTNT CONSISTS OF APPOXIMATELY: - DPC DPC DPC DPC SPC SPC SPC SPC HDCC50 - HDCC750 - HDCC340 - HDCC970 - HDCC HDCC440 - HDCC4840 # O4ASO7OOECA Over 700 Connectors 3 Different Body and Pin assemblies PC. EDGE CONNECTOS ASSOTNT CONSISTS OF APPOXIMATELY: 00-7TPF0003A 00-7TPF0003B 00-7TPF0004A 00-7TPF0004B 75-7TPF000A 75-7TPF000B 75-7TPF000A 75-7TPF000B DELUXE HOLE PLUGS ASSOTNT CONSISTS OF APPOXIMATELY: - MP000 - MP750 - MP500 - MP375 - MP50 - MP MP MP MP MP MP MP MP MP MP MP000V 8 - MP0875V 4 - VP00BM - PP00BG - PP087BG - PP087BM 4 - PP08BG 4 - PP08BM 5 - PP075BG 5 - PP075BM 5 - PP0BG PP0BM PP050BM4 0 - PPO50BG4 0 - PP043BM7 0 - PP043BG7 0 - PP037BG3 0 - PP037BM3 0 - PP05BG0 0 - PP05BM0 5 - PP08BG4 5 - PP08BM4 4 TELEPHONE: (870) 453- / micro plastics, inc. FAX: (870)

147 TABLE F OF CONTENTS FINDEX A-Z FASTENE ASSOTNT KITS # O4ASO75MSP # O4ASO0WA MOLDED NYLON FASTENES POVIDE ELECTICAL INSULATION, VIBATION AND XI COOSION ESISTANCE. HAVE A LOW THEMAL CONDUCTIVITY, AE NON-MAGNETIC AND HAVE A HIGH STENGTH-TO- WEIGHT ATIO. PACKAGED IN LAGE EUSABLE TANS- PAENT PLASTIC STOAGE BOXES. IDEAL FO: POTOTYPE WOK - Large working assortments. PODUCT DESIGN - Latest designs for increased productivity. MODEL MAKING - Commercially available standard parts. SHOP AND MAINTENANCE - Convenient selection. P.C.B. POSTS ASSOTNT CONSISTS OF APPOXIMATELY: 00-7MSP MSP MSP MSP MSP MSP MSP MSP MSP MSP0000 # O4ASOO3CG Over 5 Nylon Screw Anchors in Different Styles and Sizes. WALL ANCHO / IVETS ASSOTNT CONSISTS OF APPOXIMATELY: 40 - # / #8 SCEW ANCH0S 4 - #0 / # SCEW ANCHOS 0 - #4 / # SCEW ANCHOS 4-3/" X " PIECE IVET, STEEL - " X " TWO PIECE IVET, STEEL 4 - " X " TWO PIECE IVET, NYLON 8 - " X " TWO PIECE IVET, NYLON 4 - " X " TWO PIECE IVET, NYLON # O4ASO5OFW # O4ASO9OTLT Over 80 Assorted Nylon Twist Lock Ties in Popular Sizes. "EZ" TWIST LOCKS ASSOTNT CONSISTS OF APPOXIMATELY: 50 - " TWIST LOCK TIES 30 - " TWIST LOCK TIES 30 - " TWIST LOCK TIES 0 - " TWIST LOCK TIES 30 - " TWIST LOCK TIES 30-5/" TWIST LOCK TIES P.C.B. CAD GUIDES ASSOTNT CONSISTS OF APPOXIMATELY: 4 - CG0000 CAD GUIDES 4 - CG00550 CAD GUIDES 4 - CG00450 CAD GUIDES - CG00400 CAD GUIDES - CG00350 CAD GUIDES - CG00300 CAD GUIDES - CG0050 CAD GUIDES All in Assorted Outside Diameters and Thickness anges. FLAT WASHES ASSOTNT CONSISTS OF APPOXIMATELY: 50 - # FLATWASHES 0 - #4 FLATWASHES 0 - # FLATWASHES 0 - #8 FLATWASHES 0 - #0 FLATWASHES 0 - " FLATWASHES 40 - " FLATWASHES 0 - " FLATWASHES 00-9/" to " FLATWASHES # OASOOAFB ALL-FIT BUSHINGS ASSOTNT CONSISTS OF APPOXIMATELY: 5 - AF AF AF AF AFO AF05 Over 00 Nylon All-Fit Bushings in Popular Sizes mpsales@microplastics.com micro plastics, inc. WEBSITE: 47

148 TABLE F OF CONTENTS FASTENE ASSOTNT KITS FINDEX A-Z MOLDED NYLON FASTENES POVIDE ELECTICAL INSULATION, VIBATION XI AND COOSION ESISTANCE. HAVE A LOW THEMAL CONDUCTIVITY, AE NON-MAGNETIC AND HAVE A HIGH STENGTH-TO- WEIGHT ATIO. PACKAGED IN LAGE EUSABLE TANS- PAENT PLASTIC STOAGE BOXES. IDEAL FO: POTOTYPE WOK - Large working assortments. PODUCT DESIGN - Latest designs for increased productivity. MODEL MAKING - Commercially available standard parts. SHOP AND MAINTENANCE - Convenient selection. # O4ASO5OSB # O4ASO3ONHP # O4ASO3LCA Over 00 Lamp Accessories LAMP ACCESSOIES ASSOTNT CONSISTS OF APPOXIMATELY: 0-3 " THEADED TUBING 5 - /8" LAMP SNAP BUSHING 8 - /8 NPS LAMPCOD BUSHING - NPS LAMPCOD BUSHING 4 - NPS LAMPCOD BUSHING 3 - NPS LAMPCOD BUSHING 3 - NPS PC. THEADED BUSHING 0-3MP04K0 0-3MP04L40 0-3MPO4N MP MP000 INSULATING BUSHINGS ASSOTNT CONSISTS OF APPOXIMATELY: 4 - MP MP MP MP MP000 - MP MP MP MP057 - MP058 - MP MP00 HOLE PLUGS ASSOTNT CONSISTS OF THE FOLLOWING HOLE PLUGS IN SMOOTH AND MATTE FINISH. APPOXIMATE COUNTS. 0-3/" HOLE PLUGS 0 - " HOLE PLUGS 0-5/" HOLE PLUGS 0 - " HOLE PLUGS 0-7/" HOLE PLUGS 0 - " HOLE PLUGS 0-9/" HOLE PLUGS 0 - " HOLE PLUGS 0 - /" HOLE PLUGS 0 - " HOLE PLUGS 0-3/" HOLE PLUGS 0-7/8" HOLE PLUGS 0 - " HOLE PLUGS Over 30 Plugs in 3 Different Sizes and Types # O4ASO8OWT WIE/CABLE TIES ASSOTNT CONSISTS OF APPOXIMATELY: 44 - WIE TIES 4" to " Natural & Black 40 - BEADED TIES 4 " Long - ASSOTED CLIPS, TABS AND MOUNTS 48 TELEPHONE: (870) 453- / micro plastics, inc. FAX: (870)

149 TABLE F OF CONTENTS FINDEX A-Z TIC SCEWS, BOLTS, AND THEADED OD ALL DINSIONS AE IN MILLITES Nominal Screw Length Tolerance On Length mm THEAD SIZE to 3 mm incl. 0. A H J T M X over 3 to 0 mm 0.3 M.5 X over 0 to mm 0.4 M3 X M3.5 X over to 50 mm 0.5 M4 X M5 X over 50 mm.0 M X M8 X All tolerances are plus and minus. M0 X ITEM NUMBE DESCIPTION ITEM NUMBE DESCIPTION M00040D004 M X.4 X 4 Cheese Slot 50M040070D00 M4 X.7 X 0 Cheese Slot 50M00040D005 M X.4 X 5 Cheese Slot 50M040070D05 M4 X.7 X 5 Cheese Slot 50M00040D00 M X.4 X Cheese Slot 50M040070D030 M4 X.7 X 30 Cheese Slot 50M00040D008 M X.4 X 8 Cheese Slot 50M040070D035 M4 X.7 X 35 Cheese Slot 50M00040D00 M X.4 X 0 Cheese Slot 50M040070D040 M4 X.7 X 40 Cheese Slot 50M00040D0 M X.4 X Cheese Slot 50M050080D00 M5 X.8 X Cheese Slot 50M00040D0 M X.4 X Cheese Slot 50M050080D008 M5 X.8 X 8 Cheese Slot 50M00040D00 M X.4 X 0 Cheese Slot 50M050080D00 M5 X.8 X 0 Cheese Slot 50M00040D05 M X.4 X 5 Cheese Slot 50M050080D0 M5 X.8 X Cheese Slot 50M05045D004 M.5 X.45 X 4 Cheese Slot 50M050080D0 M5 X.8 X Cheese Slot 50M05045D005 M.5 X.45 X 5 Cheese Slot 50M050080D00 M5 X.8 X 0 Cheese Slot 50M05045D00 M.5 X.45 X Cheese Slot 50M050080D05 M5 X.8 X 5 Cheese Slot 50M05045D008 M.5 X.45 X 8 Cheese Slot 50M050080D030 M5 X.8 X 30 Cheese Slot 50M05045D00 M.5 X.45 X 0 Cheese Slot 50M050080D035 M5 X.8 X 35 Cheese Slot 50M05045D0 M.5 X.45 X Cheese Slot 50M050080D040 M5 X.8 X 40 Cheese Slot 50M05045D0 M.5 X.45 X Cheese Slot 50M0000D005 M X.00 X 5 Cheese Slot 50M05045D00 M.5 X.45 X 0 Cheese Slot 50M0000D008 M X.00 X 8 Cheese Slot 50M05045D05 M.5 X.45 X 5 Cheese Slot 50M0000D00 M X.00 X 0 Cheese Slot 50M030050D004 M3 X.5 X 4 Cheese Slot 50M0000D0 M X.00 X Cheese Slot 50M030050D005 M3 X.5 X 5 Cheese Slot 50M0000D0 M X.00 X Cheese Slot 50M030050D00 M3 X.5 X Cheese Slot 50M0000D00 M X.00 X 0 Cheese Slot 50M030050D008 M3 X.5 X 8 Cheese Slot 50M0000D05 M X.00 X 5 Cheese Slot 50M030050D00 M3 X.5 X 0 Cheese Slot 50M0000D030 M X.00 X 30 Cheese Slot 50M030050D0 M3 X.5 X Cheese Slot 50M0000D035 M X.00 X 35 Cheese Slot 50M030050D0 M3 X.5 X Cheese Slot 50M0000D040 M X.00 X 40 Cheese Slot 50M030050D00 M3 X.5 X 0 Cheese Slot 50M0000D045 M X.00 X 45 Cheese Slot 50M030050D05 M3 X.5 X 5 Cheese Slot 50M0000D050 M X.00 X 50 Cheese Slot 50M030050D030 M3 X.5 X 30 Cheese Slot 50M0000D00 M X.00 X 0 Cheese Slot 50M030050D035 M3 X.5 X 35 Cheese Slot 50M0000D05 M X.00 X 5 Cheese Slot 50M030050D04 M3 X.5 X 4 Cheese Slot 50M0000D070 M X.00 X 70 Cheese Slot 50M03500D005 M3.5 X. X 5 Cheese Slot 50M0000D075 M X.00 X 75 Cheese Slot 50M03500D00 M3.5 X. X Cheese Slot 50M0805D00 M8 X.5 X 0 Cheese Slot 50M03500D008 M3.5 X. X 8 Cheese Slot 50M0805D0 M8 X.5 X Cheese Slot 50M03500D00 M3.5 X. X 0 Cheese Slot 50M0805D00 M8 X.5 X 0 Cheese Slot 50M03500D0 M3.5 X. X Cheese Slot 50M0805D05 M8 X.5 X 5 Cheese Slot 50M03500D0 M3.5 X. X Cheese Slot 50M0805D030 M8 X.5 X 30 Cheese Slot 50M03500D00 M3.5 X. X 0 Cheese Slot 50M0805D035 M8 X.5 X 35 Cheese Slot 50M03500D05 M3.5 X. X 5 Cheese Slot 50M0805D050 M8 X.5 X 50 Cheese Slot 50M03500D05 M3.5 X. X 35 Cheese Slot 50M0805D070 M8 X.5 X 70 Cheese Slot 50M03500D04 M3.5 X. X 4 Cheese Slot 50M0050D0 M0 X.50 X Cheese Slot 50M040070D00 M4 X.7 X Cheese Slot 50M0050D00 M0 X.50 X 0 Cheese Slot 50M040070D008 M4 X.7 X 8 Cheese Slot 50M0050D05 M0 X.50 X 5 Cheese Slot 50M040070D00 M4 X.7 X 0 Cheese Slot 50M0050D030 M0 X.50 X 30 Cheese Slot 50M040070D0 M4 X.7 X Cheese Slot 50M0050D035 M0 X.50 X 35 Cheese Slot 50M040070D0 M4 X.7 X Cheese Slot 50M0050D050 M0 X.50 X 50 Cheese Slot 50M0050D00 M0 X.50 X 0 Cheese Slot CHEESE SLOTTED XII mp@microplastics.com micro plastics, inc. WEBSITE: 49

150 TABLE F OF CONTENTS FINDEX A-Z TIC SCEWS, BOLTS, AND THEADED OD XII THEAD SIZE A H W M M.5 M3 M3.5 M4 M5 M M8 M0 M min. 4.8 min min. 5.9 min min. 8.7 min min. 4. min. 7. min. 9.8 min. HEX CODE "J" HEX SLOTTED CODE "K" THEAD SIZE A W H J T M M.5 M3 M3.5 M4 M5 M M8 M min. 4.8 min min. 5.9 min min. 8.7 min min. 4. min. 7. min Nominal Screw Length to 3 mm incl. over 3 to 0 mm over 0 to mm over to 50 mm over 50 mm HEX CODE "J" Tolerance On Length mm All tolerances are plus and minus. HEX SLOTTED CODE "K" ITEM NUMBE DESCIPTION ITEM NUMBE DESCIPTION M M X.4 X 4 50M M4 X.7 X 5 50M M X.4 X 5 50M M4 X.7 X 30 50M M X.4 X 50M M4 X.7 X 35 50M M X.4 X 8 50M M4 X.7 X 40 50M M X.4 X 0 50M M5 X.8 X 50M M X.4 X 50M M5 X.8 X 8 50M M X.4 X 50M M5 X.8 X 0 50M M X.4 X 0 50M M5 X.8 X 50M M X.4 X 5 50M M5 X.8 X 50M M.5 X.45 X 4 50M M5 X.8 X 0 50M M.5 X.45 X 5 50M M5 X.8 X 5 50M M.5 X.45 X 50M M5 X.8 X 30 50M M.5 X.45 X 8 50M M5 X.8 X 35 50M M.5 X.45 X 0 50M M5 X.8 X 40 50M M.5 X.45 X * 50M M5 X.8 X 70 50M M.5 X.45 X 50M0000 O05 M X.00 X 5 50M M.5 X.45 X 0 50M M X.00 X 8 50M M.5 X.45 X 5 50M M X.00 X 0 50M M3 X.5 X 4 50M M X.00 X 50M M3 X.5 X 5 50M M X.00 X 50M M3 X.5 X 50M M X.00 X 0 50M M3 X.5 X 8 50M M X.00 X 5 50M M3 X.5 X 0 50M M X.00 X 30 50M M3 X.5 X 50M M X.00 X 35 50M M3 X.5 X 50M M X.00 X 40 50M M3 X.5 X 0 50M M X.00 X 45 50M M3 X.5 X 5 50M M X.00 X 50 50M M3 X.5 X 30 50M M X.00 X 0 50M M3 X.5 X 35 50M M X.00 X 70 50M M3 X.5 X 4 50M M X.00 X 75 50M M3.5 X. X 5 50M M8 X.5 X 0 50M M3.5 X. X 50M M8 X.5 X 50M M3.5 X. X 7 50M M8 X.5 X 0 50M M3.5 X. X 8 50M M8 X.5 X 5 50M M3.5 X. X 0 50M M8 X.5 X 30 50M M3.5 X. X 50M M8 X.5 X 35 50M M3.5 X. X 50M M8 X.5 X 40 50M M3.5 X. X 0 50M M8 X.5 X 50 50M M3.5 X. X 5 50M M8 X.5 X 70 50M M3.5 X. X 35 50M M0 X.50 X 50M M3.5 X. X 4 50M M0 X.50 X 0 50M M4 X.7 X 50M M0 X.50 X 5 50M M4 X.7 X 8 50M M0 X.50 X 30 50M M4 X.7 X 0 50M M0 X.50 X 35 50M M4 X.7 X 50M M0 X.50 X 50 50M M4 X.7 X 50M M0 X.50 X 0 50M M4 X.7 X 0 50M M0 X.50 X 70 * 50M075J 040 M X.75 X 40 * NOT AVAILABLE IN SLOT HEX HEAD. 50 TELEPHONE: (870) 453- / micro plastics, inc. FAX: (870)

151 TABLE F OF CONTENTS FINDEX A-Z TIC SCEWS, BOLTS, AND THEADED OD ALL DINSIONS AE IN MILLITES XII THEAD SIZE B A C T M3 X.5 M3.5 X. M4 X.7 M5 X.8 M X Nominal Screw Length to 3 mm incl. over 3 to 0 mm over 0 to mm over to 50 mm over 50 mm Tolerance On Length mm All tolerances are plus and minus. ITEM NUMBE DESCIPTION ITEM NUMBE DESCIPTION M030050T004 M3 X.5 X 4 Thumb Screw 50M040070T00 M4 X.7 X 0 Thumb Screw 50M030050T005 M3 X.5 X 5 Thumb Screw 50M040070T05 M4 X.7 X 5 Thumb Screw 50M030050T00 M3 X.5 X Thumb Screw 50M040070T030 M4 X.7 X 30 Thumb Screw 50M030050T008 M3 X.5 X 8 Thumb Screw 50M040070T035 M4 X.7 X 35 Thumb Screw 50M030050T00 M3 X.5 X 0 Thumb Screw 50M040070T040 M4 X.7 X 40 Thumb Screw 50M030050T0 M3 X.5 X Thumb Screw 50M050080T00 M5 X.8 X Thumb Screw 50M030050T0 M3 X.5 X Thumb Screw 50M050080T008 M5 X.8 X 8 Thumb Screw 50M030050T00 M3 X.5 X 0 Thumb Screw 50M050080T00 M5 X.8 X 0 Thumb Screw 50M030050T05 M3 X.5 X 5 Thumb Screw 50M050080T0 M5 X.8 X Thumb Screw 50M030050T030 M3 X.5 X 30 Thumb Screw 50M050080T0 M5 X.8 X Thumb Screw 50M030050T035 M3 X.5 X 35 Thumb Screw 50M050080T00 M5 X.8 X 0 Thumb Screw 50M030050T04 M3 X.5 X 4 Thumb Screw 50M050080T05 M5 X.8 X 5 Thumb Screw 50M03500T005 M3.5 X. X 5 Thumb Screw 50M050080T030 M5 X.8 X 30 Thumb Screw 50M03500T00 M3.5 X. X Thumb Screw 50M050080T040 M5 X.8 X 40 Thumb Screw 50M03500T008 M3.5 X. X 8 Thumb Screw 50M0000T005 M X.00 X 5 Thumb Screw 50M03500T00 M3.5 X. X 0 Thumb Screw 50M0000T008 M X.00 X 8 Thumb Screw 50M03500T0 M3.5 X. X Thumb Screw 50M0000T00 M X.00 X 0 Thumb Screw 50M03500T0 M3.5 X. X Thumb Screw 50M0000T0 M X.00 X Thumb Screw 50M03500T00 M3.5 X. X 0 Thumb Screw 50M0000T0 M X.00 X Thumb Screw 50M03500T05 M3.5 X. X 5 Thumb Screw 50M0000T00 M X.00 X 0 Thumb Screw 50M03500T035 M3.5 X. X 35 Thumb Screw 50M0000T0 M X.00 X Thumb Screw 50M03500T04 M3.5 X. X 4 50M040070T003 M4 X.7 X 3 50M040070T00 M4 X.7 X 50M040070T008 M4 X.7 X 8 50M040070T00 M4 X.7 X 0 50M040070T0 M4 X.7 X 50M040070T0 M4 X.7 X Thumb Screw 50M0000T05 M X.00 X 5 Thumb Screw Thumb Screw 50M0000T035 M X.00 X 35 Thumb Screw Thumb Screw 50M0000T040 M X.00 X 40 Thumb Screw Thumb Screw 50M0000T045 M X.00 X 45 Thumb Screw Thumb Screw 50M0000T050 M X.00 X 50 Thumb Screw Thumb Screw 50M0000T00 M X.00 X 0 Thumb Screw Thumb Screw 50M0000T070 M X.00 X 70 Thumb Screw 50M0000T075 M X.00 X 75 Thumb Screw ECONOMY GADE THUMB SCEW mp@microplastics.com micro plastics, inc. WEBSITE: 5

152 XII Q TABLE F OF CONTENTS FINDEX A-Z TIC SCEWS, BOLTS, AND THEADED OD ALL DINSIONS AE IN MILLITES THEAD SIZE A H O M X 0.4 M.5 X 0.45 M3 X 0.5 M3.5 X 0. M4 X 0.7 M5 X 0.8 M X M8 X.5 M0 X max ref..5 max ref..7 max ref..3 max ref..7 max ref..7 max ref. 3.3 max ref. 4. max ref. 5.0 max ref..7 max. max.4 max 3. max 3.7 max 3.9 max 4.7 max. max 7.3 max ITEM NUMBE DESCIPTION ITEM NUMBE DESCIPTION M05045M004 M.5 X.45 X 4 Oval Phil 50M040070M0 M 4 X.7 X OVAL PHILLIPS 50M05045M005 M.5 X.45 X 5 Oval Phil 50M05045M00 M.5 X.45 X Oval Phil 50M05045M008 M.5 X.45 X 8 Oval Phil 50M05045M00 M.5 X.45 X 0 Oval Phil 50M05045M0 M.5 X.45 X Oval Phil 50M05045M0 M.5 X.45 X Oval Phil 50M05045M00 M.5 X.45 X 0 Oval Phil 50M05045M05 M.5 X.45 X 5 Oval Phil 50M030050M005 M3 X.5 X 5 Oval Phil 50M030050M00 M3 X.5 X Oval Phil 50M030050M008 M3 X.5 X 8 Oval Phil 50M030050M00 M3 X.5 X 0 Oval Phil 50M030050M0 M3 X.5 X Oval Phil 50M030050M0 M3 X.5 X Oval Phil 50M030050M00 M3 X.5 X 0 Oval Phil 50M030050M05 M3 X.5 X 5 Oval Phil 50M03500M005 M3. X. X 5 Oval Phil 50M03500M00 M3.5 X. X Oval Phil 50M03500M008 M3.5 X. X 8 Oval Phil 50M03500M00 M3.5 X. X 0 Oval Phil 50M03500M0 M3.5 X. X Oval Phil 50M03500M0 M3.5 X. X Oval Phil 50M03500M00 M3.5 X. X 0 Oval Phil 50M03500M05 M3.5 X. X 5 Oval Phil 50M03500M035 M3.5 X. X 35 Oval Phil 50M040070M00 M4 X.7 X Oval Phil 50M040070M008 M4 X.7 X 8 Oval Phil 50M040070M00 M4 X.7 X 0 Oval Phil 50M040070M0 M4 X.7 X Oval Phil Oval Phil 50M040070M00 M 4 X.7 X 0 Oval Phil 50M040070M05 M 4 X.7 X 5 Oval Phil 50M050080M00 M5 X.8 X Oval Phil 50M050080M008 M5 X.8 X 8 Oval Phil 50M050080M00 M5 X.8 X 0 Oval Phil 50M050080M0 M5 X.8 X Oval Phil 50M050080M0 M5 X.8 X Oval Phil 50M050080M00 M5 X.8 X 0 Oval Phil 50M050080M05 M5 X.8 X 5 Oval Phil 50M050080M030 M5 X.8 X 30 Oval Phil 50M050080M040 M5 X.8 X 40 Oval Phil 50M0000M008 M X.00 X 8 Oval Phil 50M0000M00 M X.00 X 0 Oval Phil 50M0000M0 M X.00 X Oval Phil 50M0000M0 M X.00 X Oval Phil 50M0000M00 M X.00 X 0 Oval Phil 50M0000M05 M X.00 X 5 Oval Phil 50M0000M035 M X.00 X 35 Oval Phil 50M0000M045 M X.00 X 45 Oval Phil 50M0805M00 M8 X.5 X 0 Oval Phil 50M0805M0 M8 X.5 X Oval Phil 50M0805M00 M8 X.5 X 0 Oval Phil 50M0805M05 M8 X.5 X 5 Oval Phil 50M0805M030 M8 X.5 X 30 Oval Phil 50M0805M050 M8 X.5 X 50 Oval Phil 50M0050M00 M0 X.5 X 0 Oval Phil 50M0050M05 M0 X.5 X 5 Oval Phil 50M0050M035 M0 X.5 X 35 Oval Phil 5 TELEPHONE: (870) 453- / micro plastics, inc. FAX: (870)

153 TABLE F OF CONTENTS FINDEX A-Z TIC SCEWS, BOLTS, AND THEADED OD ALL DINSIONS AE IN MILLITES XII THEAD SIZE A H O J T M X 0.4 M.5 X 0.45 M3 X 0.5 M3.5 X 0. M4 X 0.7 M5 X 0.8 M X M8 X.5 M0 X max ref..5 max ref..7 max ref..3 max ref..7 max ref..7 max ref. 3.3 max ref. 4. max ref. 5.0 max ref..7 max. max.4 max 3. max 3.7 max 3.9 max 4.7 max. max 7.3 max ITEM NUMBE DESCIPTION ITEM NUMBE DESCIPTION M00040L004 M X.4 X 4 50M00040L005 M X.4 X 5 50M00040L00 M X.4 X 50M00040L008 M X.4 X 8 50M00040L00 M X.4 X 0 50M00040L0 M X.4 X 50M00040L0 M X.4 X 50M00040L0 M X.4 X 50M00040L05 M X.4 X 5 50M05045L004 M.5 X.45 X 4 50M05045L005 M.5 X.45 X 5 50M05045L00 M.5 X.45 X 50M05045L008 M.5 X.45 X 8 50M05045L00 M.5 X.45 X 0 50M05045L0 M.5 X.45 X 50M05045L0 M.5 X.45 X 50M05045L00 M.5 X.45 X 0 50M05045L05 M.5 X.5 X 5 50M030050L005 M3 X.5 X 5 50M030050L00 M3 X.5 X 50M030050L008 M3 X.5 X 8 50M030050L00 M3 X.5 X 0 50M030050L0 M3 X.5 X 50M030050L05 M3 X.5 X 5 50M030050L0 M3 X.5 X 50M030050L00 M3 X.5 X 0 50M030050L05 M3 X.5 X 5 50M030050L030 M3 X.5 X 30 50M030050L04 M3 X.5 X 4 50M03500L005 M3.5 X. X 5 50M03500L00 M3.5 X. X 50M03500L008 M3.5 X. X 8 50M03500L00 M3.5 X. X 0 50M03500L0 M3.5 X. X 50M03500L00 M3.5 X. X 0 50M03500L05 M3.5 X. X 5 50M03500L035 M3.5 X. X 35 50M040070L00 M4 X.7 X 50M040070L008 M4 X.7 X 8 50M040070L00 M4 X.7 X 0 Oval Slot 50M040070L0 M4 X.7 X Oval Slot Oval Slot 50M040070L05 M4 X.7 X 5 Oval Slot Oval Slot 50M040070L0 M4 X.7 X Oval Slot Oval Slot 50M040070L00 M4 X.7 X 0 Oval Slot Oval Slot 50M040070L05 M4 X.7 X 5 Oval Slot Oval Slot 50M040070L030 M4 X.7 X 30 Oval Slot Oval Slot 50M040070L035 M4 X.7 X 35 Oval Slot Oval Slot 50M050080L00 M5 X.8 X Oval Slot Oval Slot 50M050080L008 M5 X.8 X 8 Oval Slot Oval Slot 50M050080L00 M5 X.8 X 0 Oval Slot Oval Slot 50M050080L0 M5 X.8 X Oval Slot Oval Slot 50M050080L05 M5 X.8 X 5 Oval Slot Oval Slot 50M050080L0 M5 X.8 X Oval Slot Oval Slot 50M050080L00 M5 X.8 X 0 Oval Slot Oval Slot 50M050080L05 M5 X.8 X 5 Oval Slot Oval Slot 50M050080L030 M5 X.8 X 30 Oval Slot Oval Slot 50M050080L035 M5 X.8 X 35 Oval Slot Oval Slot 50M050080L040 M5 X.8 X 40 Oval Slot Oval Slot 50M0000L008 M X.00 X 8 Oval Slot Oval Slot 50M0000L00 M X.00 X 0 Oval Slot Oval Slot 50M0000L0 M X.00 X Oval Slot Oval Slot 50M0000L0 M X.00 X Oval Slot Oval Slot 50M0000L00 M X.00 X 0 Oval Slot Oval Slot 50M0000L05 M X.00 X 5 Oval Slot Oval Slot 50M0000L035 M X.00 X 35 Oval Slot Oval Slot 50M0000L040 M X.00 X 40 Oval Slot Oval Slot 50M0000L045 M X.00 X 45 Oval Slot Oval Slot 50M0000L050 M X.00 X 50 Oval Slot Oval Slot 50M0805L0 M8 X.5 X Oval Slot Oval Slot 50M0805L00 M8 X.5 X 0 Oval Slot Oval Slot 50M0805L05 M8 X.5 X 5 Oval Slot Oval Slot 50M0805L030 M8 X.5 X 30 Oval Slot Oval Slot 50M0805L050 M8 X.5 X 50 Oval Slot Oval Slot 50M0050L00 M0 X.50 X 0 Oval Slot Oval Slot 50M0050L05 M0 X.50 X 5 Oval Slot Oval Slot 50M0050L030 M0 X.50 X 30 Oval Slot Oval Slot 50M0050L035 M0 X.50 X 35 Oval Slot Oval Slot 50M0050L00 M0 X.50 X 0 Oval Slot Oval Slot OVAL SLOTTED mp@microplastics.com micro plastics, inc. WEBSITE: 53

154 XII Q TABLE F OF CONTENTS FINDEX A-Z TIC SCEWS, BOLTS, AND THEADED OD ALL DINSIONS AE IN MILLITES PAN PHILLIPS THEAD SIZE A H M M.5 M3 M3.5 M4 M5 M M8 M Nominal Screw Length to 3 mm incl. over 3 to 0 mm over 0 to mm over to 50 mm over 50 mm Tolerance On Length mm All tolerances are plus and minus. ITEM NUMBE DESCIPTION M00040P004 M X.4 X 4 Pan Phil 50M00040P005 M X.4 X 5 Pan Phil 50M00040P00 M X.4 X Pan Phil 50M00040P008 M X.4 X 8 Pan Phil 50M00040P00 M X.4 X 0 Pan Phil 50M00040P0 M X.4 X Pan Phil 50M00040P0 M X.4 X Pan Phil 50M00040P00 M X.4 X 0 Pan Phil 50M00040P05 M X.4 X 5 Pan Phil 50M05045P004 M.5 X.45 X 4 Pan Phil 50M05045P005 M.5 X.45 X 5 Pan Phil 50M05045P00 M.5 X.45 X Pan Phil 50M05045P008 M.5 X.45 X 8 Pan Phil 50M05045P00 M.5 X.45 X 0 Pan Phil 50M05045P0 M.5 X.45 X Pan Phil 50M05045P0 M.5 X.45 X Pan Phil 50M05045P00 M.5 X.45 X 0 Pan Phil 50M05045P05 M.5 X.45 X 5 Pan Phil 50M030050P004 M3 X.5 X 4 Pan Phil 50M030050P005 M3 X.5 X 5 Pan Phil 50M030050P00 M3 X.5 X Pan Phil 50M030050P008 M3 X.5 X 8 Pan Phil 50M030050P00 M3 X.5 X 0 Pan Phil 50M030050P0 M3 X.5 X Pan Phil 50M030050P0 M3 X.5 X Pan Phil 50M030050P00 M3 X.5 X 0 Pan Phil 50M030050P05 M3 X.5 X 5 Pan Phil 50M030050P030 M3 X.5 X 30 Pan Phil 50M030050P035 M3 X.5 X 35 Pan Phil 50M030050P04 M3 X.5 X 4 Pan Phil 50M03500P005 M3.5 X. X 5 Pan Phil 50M03500P00 M3.5 X. X Pan Phil 50M03500P007 M3.5 X. X 7 Pan Phil 50M03500P008 M3.5 X. X 8 Pan Phil 50M03500P00 M3.5 X. X 0 Pan Phil 50M03500P0 M3.5 X. X Pan Phil 50M03500P0 M3.5 X. X Pan Phil 50M03500P00 M3.5 X. X 0 Pan Phil 50M03500P05 M3.5 X. X 5 Pan Phil 50M03500P035 M3.5 X. X 35 Pan Phil 50M03500P04 M3.5 X. X 4 Pan Phil 50M040070P003 M4 X.7 X 3 Pan Phil 50M040070P00 M4 X.7 X Pan Phil 50M040070P008 M4 X.7 X 8 Pan Phil 50M040070P00 M4 X.7 X 0 Pan Phil 50M040070P0 M4 X.7 X Pan Phil 50M040070P0 M4 X.7 X Pan Phil 50M040070P00 M4 X.7 X 0 Pan Phil ITEM NUMBE DESCIPTION M040070P05 M4 X.7 X 5 Pan Phil 50M040070P030 M4 X.7 X 30 Pan Phil 50M040070P035 M4 X.7 X 35 Pan Phil 50M040070P040 M4 X.7 X 40 Pan Phil 50M050080P00 M5 X.8 X Pan Phil 50M050080P008 M5 X.8 X 8 Pan Phil 50M050080P00 M5 X.8 X 0 Pan Phil 50M050080P0 M5 X.8 X Pan Phil 50M050080P05 M5 X.8 X 5 Pan Phil 50M050080P0 M5 X.8 X Pan Phil 50M050080P00 M5 X.8 X 0 Pan Phil 50M050080P05 M5 X.8 X 5 Pan Phil 50M050080P030 M5 X.8 X 30 Pan Phil 50M050080P035 M5 X.8 X 35 Pan Phil 50M050080P040 M5 X.8 X 40 Pan Phil 50M0000P005 M X.00 X 5 Pan Phil 50M0000P008 M X.00 X 8 Pan Phil 50M0000P00 M X.00 X 0 Pan Phil 50M0000P0 M X.00 X Pan Phil 50M0000P0 M X.00 X Pan Phil 50M0000P00 M X.00 X 0 Pan Phil 50M0000P0 M X.00 X Pan Phil 50M0000P05 M X.00 X 5 Pan Phil 50M0000P030 M X.00 X 30 Pan Phil 50M0000P035 M X.00 X 35 Pan Phil 50M0000P040 M X.00 X 40 Pan Phil 50M0000P045 M X.00 X 45 Pan Phil 50M0000P050 M X.00 X 50 Pan Phil 50M0000P00 M X.00 X 0 Pan Phil 50M0000P070 M X.00 X 70 Pan Phil 50M0000P075 M X.00 X 75 Pan Phil 50M0805P00 M8 X.5 X 0 Pan Phil 50M0805P0 M8 X.5 X Pan Phil 50M0805P00 M8 X.5 X 0 Pan Phil 50M0805P05 M8 X.5 X 5 Pan Phil 50M0805P030 M8 X.5 X 30 Pan Phil 50M0805P035 M8 X.5 X 35 Pan Phil 50M0805P050 M8 X.5 X 50 Pan Phil 50M0805P070 M8 X.5 X 70 Pan Phil 50M0050P03 M0 X.50 X 3 Pan Phil 50M0050P0 M0 X.50 X Pan Phil 50M0050P09 M0 X.50 X 9 Pan Phil 50M0050P00 M0 X.50 X 0 Pan Phil 50M0050P05 M0 X.50 X 5 Pan Phil 50M0050P030 M0 X.50 X 30 Pan Phil 50M0050P035 M0 X.50 X 35 Pan Phil 50M0050P050 M0 X.50 X 50 Pan Phil 50M0050P00 M0 X.50 X 0 Pan Phil 54 TELEPHONE: (870) 453- / micro plastics, inc. FAX: (870)

155 TABLE F OF CONTENTS FINDEX A-Z TIC SCEWS, BOLTS, AND THEADED OD ALL DINSIONS AE IN MILLITES XII ITEM NUMBE DESCIPTION ITEM NUMBE DESCIPTION M00040N004 M X.4 X 4 Pan Slot 50M040070N05 M4 X.7 X 5 Pan Slot 50M00040N005 M X.4 X 5 Pan Slot 50M040070N030 M4 X.7 X 30 Pan Slot 50M00040N00 M X.4 X Pan Slot 50M040070N035 M4 X.7 X 35 Pan Slot 50M00040N008 M X.4 X 8 Pan Slot 50M040070N040 M4 X.7 X 40 Pan Slot 50M00040N00 M X.4 X 0 Pan Slot 50M050080N00 M5 X.8 X Pan Slot 50M00040N0 M X.4 X Pan Slot 50M050080N008 M5 X.8 X 8 Pan Slot 50M00040N0 M X.4 X Pan Slot 50M050080N00 M5 X.8 X 0 Pan Slot 50M00040N00 M X.4 X 0 Pan Slot 50M050080N0 M5 X.8 X Pan Slot 50M00040N05 M X.4 X 5 Pan Slot 50M050080N05 M5 X.8 X 5 Pan Slot 50M05045N004 M.5 X.45 X 4 Pan Slot 50M050080N0 M5 X.8 X Pan Slot 50M05045N005 M.5 X.45 X 5 Pan Slot 50M050080N00 M5 X.8 X 0 Pan Slot 50M05045N00 M.5 X.45 X Pan Slot 50M050080N05 M5 X.8 X 5 Pan Slot 50M05045N008 M.5 X.45 X 8 Pan Slot 50M050080N030 M5 X.8 X 30 Pan Slot 50M05045N00 M.5 X.45 X 0 Pan Slot 50M050080N035 M5 X.8 X 35 Pan Slot 50M05045N0 M.5 X.45 X Pan Slot 50M050080N040 M5 X.8 X 40 Pan Slot 50M05045N0 M.5 X.45 X Pan Slot 50M0000N005 M X.00 X 5 Pan Slot 50M05045N00 M.5 X.45 X 0 Pan Slot 50M0000N008 M X.00 X 8 Pan Slot 50M05045N05 M.5 X.45 X 5 Pan Slot 50M0000N00 M X.00 X 0 Pan Slot 50M030050N004 M3 X.5 X 4 Pan Slot 50M0000N0 M X.00 X Pan Slot 50M030050N005 M3 X.5 X 5 Pan Slot 50M0000N0 M X.00 X Pan Slot 50M030050N00 M3 X.5 X Pan Slot 50M0000N00 M X.00 X 0 Pan Slot 50M030050N008 M3 X.5 X 8 Pan Slot 50M0000N0 M X.00 X Pan Slot 50M030050N00 M3 X.5 X 0 Pan Slot 50M0000N05 M X.00 X 5 Pan Slot 50M030050N0 M3 X.5 X Pan Slot 50M0000N030 M X.00 X 30 Pan Slot 50M030050N0 M3 X.5 X Pan Slot 50M0000N035 M X.00 X 35 Pan Slot 50M030050N00 M3 X.5 X 0 Pan Slot 50M0000N040 M X.00 X 40 Pan Slot 50M030050N05 M3 X.5 X 5 Pan Slot 50M0000N045 M X.00 X 45 Pan Slot 50M030050N030 M3 X.5 X 30 Pan Slot 50M0000N050 M X.00 X 50 Pan Slot 50M030050N035 M3 X.5 X 35 Pan Slot 50M0000N00 M X.00 X 0 Pan Slot 50M030050N04 M3 X.5 X 4 Pan Slot 50M0000N070 M X.00 X 70 Pan Slot 50M03500N005 M3.5 X. X 5 Pan Slot 50M0000N075 M X.00 X 75 Pan Slot 50M03500N00 M3.5 X. X Pan Slot 50M0805N00 M8 X.5 X 0 Pan Slot 50M03500N007 M3.5 X. X 7 Pan Slot 50M0805N0 M8 X.5 X Pan Slot 50M03500N008 M3.5 X. X 8 Pan Slot 50M0805N00 M8 X.5 X 0 Pan Slot 50M03500N00 M3.5 X. X 0 Pan Slot 50M0805N05 M8 X.5 X 5 Pan Slot 50M03500N0 M3.5 X. X Pan Slot 50M0805N030 M8 X.5 X 30 Pan Slot 50M03500N0 M3.5 X. X Pan Slot 50M0805N035 M8 X.5 X 35 Pan Slot 50M03500N00 M3.5 X. X 0 Pan Slot 50M0805N050 M8 X.5 X 50 Pan Slot 50M03500N05 M3.5 X. X 5 Pan Slot 50M0805N070 M8 X.5 X 70 Pan Slot 50M03500N035 M3.5 X. X 35 Pan Slot 50M0050N03 M0 X.50 X 3 Pan Slot 50M03500N04 M3.5 X. X 4 50M040070N003 M4 X.7 X 3 50M040070N00 M4 X.7 X 50M040070N008 M4 X.7 X 8 50M040070N00 M4 X.7 X 0 50M040070N0 M4 X.7 X 50M040070N0 M4 X.7 X 50M040070N00 M4 X.7 X 0 Pan Slot 50M0050N0 M0 X.50 X Pan Slot Pan Slot 50M0050N09 M0 X.50 X 9 Pan Slot Pan Slot 50M0050N00 M0 X.50 X 0 Pan Slot Pan Slot 50M0050N05 M0 X.50 X 5 Pan Slot Pan Slot 50M0050N030 M0 X.50 X 30 Pan Slot Pan Slot 50M0050N035 M0 X.50 X 35 Pan Slot Pan Slot 50M0050N050 M0 X.50 X 50 Pan Slot Pan Slot 50M0050N00 M0 X.50 X 0 Pan Slot PAN SLOTTED THEAD SIZE A H J T M M.5 M3 M3.5 M4 M5 M M8 M Nominal Screw Length to 3 mm incl. over 3 to 0 mm over 0 to mm over to 50 mm over 50 mm Tolerance On Length mm All tolerances are plus and minus. 0.5 min. 0. min. 0.7 min. 0.8 min..0 min.. min..4 min..9 min..4 min. mp@microplastics.com micro plastics, inc. WEBSITE: 55

156 XII THEAD SIZE A H M X 0.4 M.5 X 0.45 M3 X 0.5 M3.5 X 0. M4 X 0.7 M5 X 0.8 M X.0 M8 X.5 M0 X.5 Q TABLE F OF CONTENTS FINDEX A-Z TIC SCEWS, BOLTS, AND THEADED OD FILLISTE PHILLIPS 50M00040G004 M X.4 X 4 50M00040G005 M X.4 X 5 ALL DINSIONS AE IN MILLITES ITEM NUMBE DESCIPTION ITEM NUMBE DESCIPTION Fill Phil 50M040070G05 M4 X.7 X 5 Fill Phil Fill Phil 50M040070G030 M4 X.7 X 30 Fill Phil 50M00040G00 M X.4 X Fill Phil 50M040070G035 M4 X.7 X 35 Fill Phil 50M00040G008 M X.4 X 8 Fill Phil 50M040070G040 M4 X.7 X 40 Fill Phil 50M00040G00 M X.4 X 0 Fill Phil 50M050080G00 M5 X.8 X Fill Phil 50M00040G0 M X.4 X Fill Phil 50M050080G008 M5 X.8 X 8 Fill Phil 50M00040G0 M X.4 X Fill Phil 50M050080G00 M5 X.8 X 0 Fill Phil 50M00040G00 M X.4 X 0 Fill Phil 50M050080G0 M5 X.8 X Fill Phil 50M00040G05 M X.4 X 5 Fill Phil 50M050080G05 M5 X.8 X 5 Fill Phil 50M05045G004 M.5 X.45 X 4 Fill Phil 50M050080G0 M5 X.8 X Fill Phil 50M05045G005 M.5 X.45 X 5 Fill Phil 50M050080G00 M5 X.8 X 0 Fill Phil 50M05045G00 M.5 X.45 X Fill Phil 50M050080G05 M5 X.8 X 5 Fill Phil 50M05045G008 M.5 X.45 X 8 Fill Phil 50M050080G030 M5 X.8 X 30 Fill Phil 50M05045G00 M.5 X.45 X 0 Fill Phil 50M050080G035 M5 X.8 X 35 Fill Phil 50M05045G0 M.5 X.45 X Fill Phil 50M050080G040 M5 X.8 X 40 Fill Phil 50M05045G0 M.5 X.45 X Fill Phil 50M0000G005 M X.0 X 5 Fill Phil 50M05045G00 M.5 X.45 X 0 Fill Phil 50M0000G008 M X.00 X 8 Fill Phil 50M05045G05 M.5 X.45 X 5 Fill Phil 50M0000G00 M X.00 X 0 Fill Phil 50M030050G004 M3 X.5 X 4 Fill Phil 50M0000G0 M X.00 X Fill Phil 50M030050G005 M3 X.5 X 5 Fill Phil 50M0000G0 M X.00 X Fill Phil 50M030050G00 M3 X.5 X Fill Phil 50M0000G00 M X.00 X 0 Fill Phil 50M030050G008 M3 X.5 X 8 Fill Phil 50M0000G0 M X.00 X Fill Phil 50M030050G00 M3 X.5 X 0 Fill Phil 50M0000G05 M X.00 X 5 Fill Phil 50M030050G0 M3 X.5 X Fill Phil 50M0000G030 M X.00 X 30 Fill Phil 50M030050G0 M3 X.5 X Fill Phil 50M0000G035 M X.00 X 35 Fill Phil 50M030050G00 M3 X.5 X 0 Fill Phil 50M0000G040 M X.00 X 40 Fill Phil 50M030050G05 M3 X.5 X 5 Fill Phil 50M0000G045 M X.00 X 45 Fill Phil 50M030050G030 M3 X.5 X30 Fill Phil 50M0000G050 M X.00 X 50 Fill Phil 50M030050G035 M3 X.5 X 35 Fill Phil 50M0000G00 M X.00 X 0 Fill Phil 50M030050G04 M3 X.5 X 4 Fill Phil 50M0000G070 M X.00 X 70 Fill Phil 50M03500G005 M3.5 X. X 5 Fill Phil 50M0000G075 M X.00 X 75 Fill Phil 50M03500G00 M3.5 X. X Fill Phil 50M0805G00 M8 X.5 X 0 Fill Phil 50M03500G007 M3.5 X. X 7 Fill Phil 50M0805G0 M8 X.5 X Fill Phil 50M03500G008 M3.5 X. X 8 Fill Phil 50M0805G00 M8 X.5 X 0 Fill Phil 50M03500G00 M3.5 X. X 0 Fill Phil 50M0805G05 M8 X.5 X 5 Fill Phil 50M03500G0 M3.5 X. X Fill Phil 50M0805G030 M8 X.5 X 30 Fill Phil 50M03500G0 M3.5 X. X Fill Phil 50M0805G035 M8 X.5 X 35 Fill Phil 50M03500G00 M3.5 X. X0 Fill Phil 50M0805G050 M8 X.5 X 50 Fill Phil 50M03500G05 M3.5 X. X5 Fill Phil 50M0805G070 M8 X.5 X 70 Fill Phil 50M03500G035 M3.5 X. X 35 Fill Phil 50M0050G03 M0 X.50 X 3 Fill Phil 50M03500G04 M3.5 X. X 4 Fill Phil 50M0050G0 M0 X.50 X Fill Phil 50M040070G003 M4 X.7 X 3 Fill Phil 50M0050G09 M0 X.50 X 9 Fill Phil 50M040070G00 M4 X.7 X Fill Phil 50M0050G00 M0 X.50 X 0 Fill Phil 50M040070G008 M4 X.7 X 8 Fill Phil 50M0050G05 M0 X.50 X 5 Fill Phil 50M040070G00 M4 X.7 X 0 Fill Phil 50M0050G030 M0 X.50 X 30 Fill Phil 50M040070G0 M4 X.7 X Fill Phil 50M0050G035 M0 X.50 X 35 Fill Phil 50M040070G0 M4 X.7 X Fill Phil 50M0050G050 M0 X.50 X 50 Fill Phil 50M040070G00 M4 X.7 X 0 Fill Phil 50M0050G00 M0 X.50 X 0 Fill Phil 5 TELEPHONE: (870) 453- / micro plastics, inc. FAX: (870)

157 TABLE F OF CONTENTS FINDEX A-Z TIC SCEWS, BOLTS, AND THEADED OD ALL DINSIONS AE IN MILLITES ITEM NUMBE DESCIPTION ITEM NUMBE DESCIPTION M00040F004 M X.4 X 4 Fill Slot 50M040070F05 M4 X.7 X 5 Fill Slot 50M00040F005 M X.4 X 5 Fill Slot 50M040070F030 M4 X.7 X 30 Fill Slot 50M00040F00 M X.4 X Fill Slot 50M040070F035 M4 X.7 X 35 Fill Slot 50M00040F008 M X.4 X 8 Fill Slot 50M040070F040 M4 X.7 X 40 Fill Slot 50M00040F00 M X.4 X 0 Fill Slot 50M050080F00 M5 X.8 X Fill Slot 50M00040F0 M X.4 X Fill Slot 50M050080F008 M5 X.8 X 8 Fill Slot 50M00040F0 M X.4 X Fill Slot 50M050080F00 M5 X.8 X 0 Fill Slot 50M00040F00 M X.4 X 0 Fill Slot 50M050080F0 M5 X.8 X Fill Slot 50M00040F05 M X.4 X 5 Fill Slot 50M050080F05 M5 X.8 X 5 Fill Slot 50M05045F004 M.5 X.45 X 4 Fill Slot 50M050080F0 M5 X.8 X Fill Slot 50M05045F005 M.5 X.45 X 5 Fill Slot 50M050080F00 M5 X.8 X 0 Fill Slot 50M05045F00 M.5 X.45 X Fill Slot 50M050080F05 M5 X.8 X 5 Fill Slot 50M05045F008 M.5 X.45 X 8 Fill Slot 50M050080F030 M5 X.8 X 30 Fill Slot 50M05045F00 M.5 X.45 X 0 Fill Slot 50M050080F035 M5 X.8 X 35 Fill Slot 50M05045F0 M.5 X.45 X Fill Slot 50M050080F040 M5 X.8 X 40 Fill Slot 50M05045F0 M.5 X.45 X Fill Slot 50M0000F005 M X.00 X 5 Fill Slot 50M05045F00 M.5 X.45 X 0 Fill Slot 50M0000F008 M X.00 X 8 Fill Slot 50M05045F05 M.5 X.45 X 5 Fill Slot 50M0000F00 M X.00 X 0 Fill Slot 50M030050F004 M3 X.5 X 4 Fill Slot 50M0000F0 M X.00 X Fill Slot 50M030050F005 M3 X.5 X 5 Fill Slot 50M0000F0 M X.00 X Fill Slot 50M030050F00 M3 X.5 X Fill Slot 50M0000F00 M X.00 X 0 Fill Slot 50M030050F008 M3 X.5 X 8 Fill Slot 50M0000F0 M X.00 X Fill Slot 50M030050F00 M3 X.5 X 0 Fill Slot 50M0000F05 M X.00 X 5 Fill Slot 50M030050F0 M3 X.5 X Fill Slot 50M0000F030 M X.00 X 30 Fill Slot 50M030050F0 M3 X.5 X Fill Slot 50M0000F035 M X.00 X 35 Fill Slot 50M030050F00 M3 X.5 X 0 Fill Slot 50M0000F040 M X.00 X 40 Fill Slot 50M030050F05 M3 X.5 X 5 Fill Slot 50M0000F045 M X.00 X 45 Fill Slot 50M030050F030 M3 X.5 X 30 Fill Slot 50M0000F050 M X.00 X 50 Fill Slot 50M030050F035 M3 X.5 X 35 Fill Slot 50M0000F00 M X.00 X 0 Fill Slot 50M030050F04 M3 X.5 X 4 Fill Slot 50M0000F070 M X.00 X 70 Fill Slot 50M03500F005 M3.5 X. X 5 Fill Slot 50M0000F075 M X.00 X 75 Fill Slot 50M03500F00 M3.5 X. X Fill Slot 50M0805F00 M8 X.5 X 0 Fill Slot 50M03500F007 M3.5 X. X 7 Fill Slot 50M0805F0 M8 X.5 X Fill Slot 50M03500F008 M3.5 X. X 8 Fill Slot 50M0805F00 M8 X.5 X 0 Fill Slot 50M03500F00 M3.5 X. X 0 Fill Slot 50M0805F05 M8 X.5 X 5 Fill Slot 50M03500F0 M3.5 X. X Fill Slot 50M0805F030 M8 X.5 X 30 Fill Slot 50M03500F0 M3.5 X. X Fill Slot 50M0805F035 M8 X.5 X 35 Fill Slot 50M03500F00 M3.5 X. X 0 Fill Slot 50M0805F050 M8 X.5 X 50 Fill Slot 50M03500F05 M3.5 X. X 5 Fill Slot 50M0805F070 M8 X.5 X 70 Fill Slot 50M03500F035 M3.5 X. X 35 Fill Slot 50M0050F03 M0 X.50 X 3 Fill Slot 50M03500F04 M3.5 X. X 4 Fill Slot 50M0050F0 M0 X.50 X Fill Slot 50M040070F003 M4 X.7 X 3 Fill Slot 50M0050F09 M0 X.50 X 9 Fill Slot 50M040070F00 M4 X.7 X Fill Slot 50M0050F00 M0 X.50 X 0 Fill Slot 50M040070F008 M4 X.7 X 8 Fill Slot 50M0050F05 M0 X.50 X 5 Fill Slot 50M040070F00 M4 X.7 X 0 Fill Slot 50M0050F030 M0 X.50 X 30 Fill Slot 50M040070F0 M4 X.7 X Fill Slot 50M0050F035 M0 X.50 X 35 Fill Slot 50M040070F0 M4 X.7 X Fill Slot 50M0050F050 M0 X.50 X 50 Fill Slot 50M040070F00 M4 X.7 X 0 Fill Slot 50M0050F00 M0 X.50 X 0 Fill Slot THEAD SIZE A H J T M X M.5 X M3 X M3.5 X M4 X M5 X M X M8 X M0 X FILLISTE SLOTTED XII mp@microplastics.com micro plastics, inc. WEBSITE: 57

158 XII Q TABLE F OF CONTENTS FINDEX A-Z TIC SCEWS, BOLTS, AND THEADED OD ALL DINSIONS AE IN MILLITES THEAD SIZE A * H M X 0.4 M.5 X 0.45 M3 X 0.5 M3.5 X 0. M4 X 0.7 M5 X 0.8 M X M8 X.5 M0 X max ref..5 max ref..7 max ref..3 max ref..7 max ref..7 max ref. 3.3 max ref. 4. max ref. 5.0 max ref. * H Dimension is a reference dimension only. ITEM NUMBE DESCIPTION ITEM NUMBE DESCIPTION M05045I004 M.5 X.45 X 4 Flat Phil 50M040070I0 M4 X.7 X FLAT PHILLIPS 50M05045I005 M.5 X.45 X 5 Flat Phil 50M05045I00 M.5 X.45 X Flat Phil 50M05045I008 M.5 X.45 X 8 Flat Phil 50M05045I00 M.5 X.45 X 0 Flat Phil 50M05045I0 M.5 X.45 X Flat Phil 50M05045I0 M.5 X.45 X Flat Phil 50M05045I00 M.5 X.45 X 0 Flat Phil 50M05045I05 M.5 X.45 X 5 Flat Phil 50M030050I005 M3 X.5 X 5 Flat Phil 50M030050I00 M3 X.5 X Flat Phil 50M030050I008 M3 X.5 X 8 Flat Phil 50M030050I00 M3 X.5 X 0 Flat Phil 50M030050I0 M3 X.5 X Flat Phil 50M030050I0 M3 X.5 X Flat Phil 50M030050I00 M3 X.5 X 0 Flat Phil 50M030050I05 M3 X.5 X 5 Flat Phil 50M03500I005 M3.5 X. X 5 Flat Phil 50M03500I00 M3.5 X. X Flat Phil Flat Phil 50M040070I00 M4 X.7 X 0 Flat Phil 50M040070I05 M4 X.7 X 5 Flat Phil 50M050080I00 M5 X.8 X Flat Phil 50M050080I008 M5 X.8 X 8 Flat Phil 50M050080I00 M5 X.8 X 0 Flat Phil 50M050080I0 M5 X.8 X Flat Phil 50M050080I0 M5 X.8 X Flat Phil 50M050080I00 M5 X.8 X 0 Flat Phil 50M050080I05 M5 X.8 X 5 Flat Phil 50M050080I030 M5 X.8 X 30 Flat Phil 50M050080I040 M5 X.8 X 40 Flat Phil 50M0000I008 M X.00 X 8 Flat Phil 50M0000I00 M X.00 X 0 Flat Phil 50M0000I0 M X.00 X Flat Phil 50M0000I0 M X.00 X Flat Phil 50M0000I00 M X.00 X 0 Flat Phil 50M0000I05 M X.00 X 5 Flat Phil 50M0000I035 M X.00 X 35 Flat Phil 50M03500I008 M3.5 X. X 8 Flat Phil 50M0000I045 M X.00 X 45 Flat Phil 50M03500I00 M3.5 X. X 0 Flat Phil 50M0805I00 M8 X.5 X 0 Flat Phil 50M03500I0 M3.5 X. X Flat Phil 50M0805I0 M8 X.5 X Flat Phil 50M03500I0 M3.5 X. X Flat Phil 50M0805I00 M8 X.5 X 0 Flat Phil 50M03500I00 M3.5 X. X 0 Flat Phil 50M0805I05 M8 X.5 X 5 Flat Phil 50M03500I05 M3.5 X. X 5 Flat Phil 50M0805I030 M8 X.5 X 30 Flat Phil 50M03500I035 M3.5 X. X 35 Flat Phil 50M0805I050 M8 X.5 X 50 Flat Phil 50M040070I00 M4 X.7 X Flat Phil 50M0050I00 M0 X.50 X 0 Flat Phil 50M040070I008 M4 X.7 X 8 Flat Phil 50M0050I05 M0 X.50 X 5 Flat Phil 50M040070I00 M4 X.7 X 0 Flat Phil 50M0050I035 M0 X.50 X 35 Flat Phil 50M040070I0 M4 X.7 X Flat Phil 58 TELEPHONE: (870) 453- / micro plastics, inc. FAX: (870)

159 TABLE F OF CONTENTS FINDEX A-Z TIC SCEWS, BOLTS, AND THEADED OD ALL DINSIONS AE IN MILLITES XII THEAD SIZE A H J T M X 0.4 M.5 X 0.45 M3 X 0.5 M3.5 X 0. M4 X 0.7 M5 X 0.8 M X M8 X.5 M0 X max ref..5 max ref..7 max ref..3 max ref..7 max ref..7 max ref. 3.3 max ref. 4. max ref. 5.0 max ref ITEM NUMBE DESCIPTION ITEM NUMBE DESCIPTION M00040H004 M X.4 X 4 Flat Slot 50M040070H00 M4 X.7 X 0 Flat Slot 50M00040H005 M X.4 X 5 Flat Slot 50M040070H0 M4 X.7 X Flat Slot 50M00040H00 M X.4 X Flat Slot 50M040070H05 M4 X.7 X 5 Flat Slot 50M00040H008 M X.4 X 8 Flat Slot 50M040070H0 M4 X.7 X Flat Slot 50M00040H00 M X.4 X 0 Flat Slot 50M040070H00 M4 X.7 X 0 Flat Slot 50M00040H0 M X.4 X Flat Slot 50M040070H05 M4 X.7 X 5 Flat Slot 50M00040H0 M X.4 X Flat Slot 50M040070H030 M4 X.7 X 30 Flat Slot 50M00040H0 M X.4 X Flat Slot 50M040070H035 M4 X.7 X 35 Flat Slot 50M00040H05 M X.4 X 5 Flat Slot 50M050080H00 M5 X.8 X Flat Slot 50M05045H004 M.5 X.45 X 4 Flat Slot 50M050080H008 M5 X.8 X 8 Flat Slot 50M05045H005 M.5 X.45 X 5 Flat Slot 50M050080H00 M5 X.8 X 0 Flat Slot 50M05045H00 M.5 X.45 X Flat Slot 50M050080H0 M5 X.8 X Flat Slot 50M05045H008 M.5 X.45 X 8 Flat Slot 50M050080H05 M5 X.8 X 5 Flat Slot 50M05045H00 M.5 X.45 X 0 Flat Slot 50M050080H0 M5 X.8 X Flat Slot 50M05045H0 M.5 X.45 X Flat Slot 50M050080H00 M5 X.8 X 0 Flat Slot 50M05045H0 M.5 X.45 X Flat Slot 50M050080H05 M5 X.8 X 5 Flat Slot 50M05045H00 M.5 X.45 X 0 Flat Slot 50M050080H030 M5 X.8 X 30 Flat Slot 50M05045H05 M.5 X.45 X 5 Flat Slot 50M050080H040 M5 X.8 X 40 Flat Slot 50M030050H005 M3 X.5 X 5 Flat Slot 50M0000H008 M X.00 X 8 Flat Slot 50M030050H00 M3 X.5 X Flat Slot 50M0000H00 M X.00 X 0 Flat Slot 50M030050H008 M3 X.5 X 8 Flat Slot 50M0000H0 M X.00 X Flat Slot 50M030050H00 M3 X.5 X 0 Flat Slot 50M0000H0 M X.00 X Flat Slot 50M030050H0 M3 X.5 X Flat Slot 50M0000H00 M X.00 X 0 Flat Slot 50M030050H05 M3 X.5 X 5 Flat Slot 50M0000H05 M X.00 X 5 Flat Slot 50M030050H0 M3 X.5 X Flat Slot 50M0000H035 M X.00 X 35 Flat Slot 50M030050H00 M3 X.5 X 0 Flat Slot 50M0000H040 M X.00 X 40 Flat Slot 50M030050H05 M3 X.5 X 5 Flat Slot 50M0000H045 M X.00 X 45 Flat Slot 50M030050H030 M3 X.5 X 30 Flat Slot 50M0000H050 M X.00 X 50 Flat Slot 50M030050H04 M3 X.5 X 4 Flat Slot 50M0805H0 M8 X.5 X Flat Slot 50M03500H005 M3.5 X. X 5 Flat Slot 50M0805H00 M8 X.5 X 0 Flat Slot 50M03500H00 M3.5 X. X Flat Slot 50M0805H05 M8 X.5 X 5 Flat Slot 50M03500H008 M3.5 X. X 8 Flat Slot 50M0805H030 M8 X.5 X 30 Flat Slot 50M03500H00 M3.5 X. X 0 Flat Slot 50M0805H050 M8 X.5 X 50 Flat Slot 50M03500H0 M3.5 X. X Flat Slot 50M0050H00 M0 X.50 X 0 Flat Slot 50M03500H05 M3.5 X. X 5 Flat Slot 50M0050H05 M0 X.50 X 5 Flat Slot 50M03500H035 M3.5 X. X 35 Flat Slot 50M0050H030 M0 X.50 X 30 Flat Slot 50M040070H00 M4 X.7 X Flat Slot 50M0050H035 M0 X.50 X 35 Flat Slot 50M040070H008 M4 X.7 X 8 Flat Slot 50M0050H00 M0 X.50 X 0 Flat Slot FLAT SLOTTED mp@microplastics.com micro plastics, inc. WEBSITE: 59

160 XII M4 X 0.7 M5 X 0.8 M X.0 M8 X.5 M0 X.5 Q TABLE F OF CONTENTS FINDEX A-Z TIC SCEWS, BOLTS, AND THEADED OD THEAD SIZE A J T ALL DINSIONS AE IN MILLITES GUB SLOTTED ITEM NUMBE DESCIPTION ITEM NUMBE DESCIPTION M M4 X.7 X 3 Grub Slot 50M00000 M X.00 X Grub Slot 50M M4 X.7 X Grub Slot 50M M X.00 X 5 Grub Slot 50M M4 X.7 X 8 Grub Slot 50M M X.00 X 30 Grub Slot 50M M4 X.7 X 0 Grub Slot 50M M X.00 X 35 Grub Slot 50M M4 X.7 X Grub Slot 50M M X.00 X 45 Grub Slot 50M M4 X.7 X Grub Slot 50M M X.00 X 50 Grub Slot 50M M4 X.7 X 0 Grub Slot 50M M X.00 X 0 Grub Slot 50M M4 X.7 X 5 Grub Slot 50M M X.00 X 70 Grub Slot 50M M4 X.7 X 30 Grub Slot 50M M X.00 X 75 Grub Slot 50M M4 X.7 X 35 Grub Slot 50M M8 X.5 X 8 Grub Slot 50M M4 X.7 X 40 Grub Slot 50M M8 X.5 X 0 Grub Slot 50M M5 X.8 X Grub Slot 50M08050 M8 X.5 X Grub Slot 50M M5 X.8 X 8 Grub Slot 50M M8 X.5 X 0 Grub Slot 50M M5 X.8 X 0 Grub Slot 50M M8 X.5 X 5 Grub Slot 50M M5 X.8 X Grub Slot 50M M8 X.5 X 30 Grub Slot 50M M5 X.8 X Grub Slot 50M M8 X.5 X 35 Grub Slot 50M M5 X.8 X 0 Grub Slot 50M M8 X.5 X 50 Grub Slot 50M M5 X.8 X 5 Grub Slot 50M M0 X.50 X 3 Grub Slot 50M M5 X.8 X 30 Grub Slot 50M00500 M0 X.50 X Grub Slot 50M M5 X.8 X 40 Grub Slot 50M M0 X.50 X 9 Grub Slot 50M M X.00 X 5 Grub Slot 50M M0 X.50 X 0 Grub Slot 50M M X.00 X 8 Grub Slot 50M M0 X.50 X 5 Grub Slot 50M M X.00 X 0 Grub Slot 50M M0 X.50 X 30 Grub Slot 50M00000 M X.00 X Grub Slot 50M M0 X.50 X 35 Grub Slot 50M00000 M X.00 X Grub Slot 50M M0 X.50 X 50 Grub Slot 50M M X.00 X 0 Grub Slot 50M M0 X.50 X 0 Grub Slot HEX SOCKET HEAD CAP SCEW ITEM NUMBE DESCIPTION M0050S03 50M0050S0 50M0050S09 50M0050S00 50M0050S05 50M0050S030 50M0050S035 50M0050S050 50M0050S00 M0 X.50 X 3 M0 X.50 X M0 X.50 X 9 M0 X.50 X 0 M0 X.50 X 5 M0 X.50 X 30 M0 X.50 X 35 M0 X.50 X 50 M0 X.50 X 0 Hex Soc Hex Soc Hex Soc Hex Soc Hex Soc Hex Soc Hex Soc Hex Soc Hex Soc Nominal Screw Size M. thru M0 M thru M0 Over M0 Nominal Screw Length Tolerance on Length, mm to mm, incl. over to 50 mm over 50 to 0 mm over 0 to 00mm over 00 mm All tolerances are plus and minus. THEAD HEX SIZE A H J DEPTH M nom min. 0 TELEPHONE: (870) 453- / micro plastics, inc. FAX: (870)

161 TABLE F OF CONTENTS FINDEX A-Z TIC SCEWS, BOLTS, AND THEADED OD ALL DINSIONS AE IN MILLITES NYLON THEADED OD XII This versatile threaded rod stock is easily cut to size, resistant to most chemicals,electrically insulating, nonmagnetic, light-weight, low thermal conductivity, vibration and abrasion resistant. Stock length is meter. We can furnish cut to your length with a nominal cutting charge. Other plastic materials can be furnished on special order. ITEM NUMBE 38M040070T 38M050080T 38M0000T 38M0805T DESCIPTION M 4 X.07 THEADED OD M 5 X.08 THEADED OD M X.0 THEADED OD M 8 X.5 THEADED OD ALL DINSIONS AE IN MILLITES TIC NUTS XIII NYLON WING NUTS ITEM NUMBE DESCIPTION A B C D 0M040070WN M4 X M050080WN M5 X M0000WN M X M0805WN M8 X M0050WN M0 X M075WN M X DECO WING NUTS TOLEANCE +/-. mm TOLEANCE +/-. mm ITEM NUMBE DESCIPTION A B C D 0M030050DWN M3 X M040070DWN M4 X M050080DWN M5 X M0000DWN M X ITEM NUMBE DESCIPTION A B C D 0M030050DLWN M3 X M040070DLWN M4 X M050080DLWN M5 X M0000DLWN M X DECO LOCKING WING NUTS mp@microplastics.com micro plastics, inc. WEBSITE:

162 XIII Q TABLE F OF CONTENTS TIC NUTS FINDEX A-Z ALL DINSIONS AE IN MILLITES NYLON THUMB NUTS TOLEANCE +/-. mm ITEM NUMBE DESCIPTION A B C 08M040070TN M4 X NYLON HEX NUTS ITEM NUMBE DESCIPTION F H 04M00040HN M X M05045HN M.5 X M030050HN M3 X M03500HN M3.5 X 0. 04M040070HN M4 X M050080HN M5 X M0000HN M X.0 04M0805HN M8 X.5 04M0050HN M0 X.50 TOLEANCE +/-. mm DESIGNED FO STEEL SCEWS NYLON LOCK NUTS TOLEANCE +/-. mm ITEM NUMBE DESCIPTION F H 07M0000LN M X NYLON CAP NUTS TOLEANCE +/-. mm ITEM NUMBE DESCIPTION F H * EF. 05M040070CN M4 X M050080CN M5 X M0000CN M X M0805CN M8 X M0050CN M0 X M075CN M X M000CN M X M0050CN M0 X LOCKING CAP NUTS 05M040070LCN M4 X M050080LCN M5 X M0000LCN M X TELEPHONE: (870) 453- / micro plastics, inc. FAX: (870)

163 TABLE F OF CONTENTS FINDEX A-Z TIC WASHES AND SCEW INSULATOS Nylon Screw Insulators are used to isolate metal screws electrically as well as to reduce corrosion. They can be used as light load bearings in many applications. Specials can be made to order for small tool charge. Specifiy the screw size and length when ordering. XIV TOLEANCE +/-. mm TOLEANCE +/-.3 mm NYLON FLAT WASHES ITEM NUMBE DESCIPTION A B T M M M M M M M M M M M05000 M M0050 M M M M M M0050 M SIZES NOT SHOWN WILL BE TOOLED UPON EQUEST NYLON SCEW INSULATOS ITEM NUMBE DESCIPTION L A B C D 0SCM00003 SCM X SCM00004 SCM X SCM00005 SCM X SCM0000 SCM X SCM00300 SCM 3 X SCM SCM 3 X SCM SCM 3 X SCM SCM 3 X SCM00300 SCM 3 X SCM SCM 3 X SCM SCM 3 X SCM SCM 3 X SCM00300 SCM 3 X SCM SCM 4 X SCM SCM 4 X SCM SCM 4 X SCM SCM 4 X SCM SCM 4 X SCM SCM 5 X SCM SCM 5 X SCM SCM 5 X SCM SCM 5 X SCM SCM 5 X SCM00004 SCM X SCM0000 SCM X SCM00008 SCM X SCM0000 SCM X SCM000 SCM X SCM SCM 8 X SCM00800 SCM 8 X SCM SCM 8 X SCM00800 SCM 8 X SCM0080 SCM 8 X mp@microplastics.com micro plastics, inc. WEBSITE: 3

164 TIC SPACES XV 4 ITEM NUMBE DESC. A B L ITEM NUMBE DESC. A B L ITEM NUMBE DESC. A B L ALL DINSIONS AE IN MILLITES TIC NYLON SPACES MATEIAL: HEAT STABILIZED BLACK NYLON TOLEANCE ON A AND L DINSIONS AE +/-.38 mm TOLEANCE ON B DINSION IS +/-. mm TELEPHONE: (870) 453- / micro plastics, inc. FAX: (870) Q F INDEX A-Z TABLE OF CONTENTS F

165 TABLE F OF CONTENTS FINDEX A-Z TIC FASTENE ASSOTNT KITS MOLDED NYLON FASTENES POVIDE ELECTICAL INSULATION, VIBATION AND COOSION ESISTANCE. NYLON KITS HAVE A LOW THEMAL CONDUCTIVITY, XVI AE NON-MAGNETIC AND HAVE A HIGH STENGTH-TO- WEIGHT ATIO. PACKAGED IN LAGE EUSABLE TANS- PAENT PLASTIC STOAGE BOXES. IDEAL FO: POTOTYPE WOK - Large working assortments. PODUCT DESIGN - Latest designs for increased productivity. MODEL MAKING - Commercially available standard parts. SHOP AND MAINTENANCE - Convenient selection. # O4ASO95MSM MACHINE SCEWS OVE 950 NYLON FASTENES OVE 0 DIFFEENT SIZES AND TYPES Assortment Kit Consists of Approximately: 0 - M X 4 to 5 Long 70 - M.5 X 4 to 5 Long 5 - M3 X 5 to 5 Long 0 - M3.5 X 5 to 5 Long 30 - M4 X to 5 Long 35 - M4 X to 5 Long 85 - M X 5 to 5 Long # O4ASO45FWM FLAT WASHES OVE 700 NYLON FASTENES Assortment Kit Consists of Approximately: M Flat Washers 85 - M.5 Flat Washers M3 Flat Washers 50 - M3.5 Flat Washers M4 Flat Washers M5 Flat Washers 70 - M Flat Washers # O4ASO705SCM SCEW INSULATOS OVE 700 NYLON FASTENES OVE 0 DIFFEENT SIZES AND TYPES Assortment Kit Consists of Approximately: 50 - M Screw Insulators 5 - M3 Screw Insulators 00- M4 Screw Insulators 5 - M5 Screw Insulators 05 - M Screw Insulators # O4ASO90SPM SPACES OVE 00 NYLON FASTENES OVE 30 DIFFEENT SIZES AND TYPES Assortment Kit Consists of Approximately: 05 - M X 3 to 5 Long 95 - M.5 X 3 to 5 Long 80 - M3 X 3 to 5 Long 50 - M3.5 X 3 to 0 Long 0 - M4 X 3 to 5 Long 50 - M5 X 3 to 5 Long 55 - M X 3 to 5 Long # O4ASO700SWSM SHOULDE WASHES OVE 000 NYLON FASTENES OVE 0 DIFFEENT SIZES AND TYPES Assortment Kit Consists of Approximately: 35 - M Shoulder Washers 45 - M3 Shoulder Washers 80 - M4 Shoulder Washers 5 - M5 Shoulder Washers 05 - M Shoulder Washers # O4ASO55N MACHINE SCEWS AND NUTS OVE 55 NYLON FASTENES OVE 30 DIFFEENT SIZES AND TYPES Slotted Cheese Head, Hex Head, Fillister Head and 90 Flat Head Styles,MACHINE SCEWS in sizes; Assortment Kit Consists of Approximately: 00 - M3 X 5 X to M3.5 X X 5 to M4 X 7 X to 00 - M5 X 8 X to 30 - M X.00 X 8 to 00 - Metric Nuts & Washers mp@microplastics.com micro plastics, inc. WEBSITE: 5

166 INFO SIZE Q MICO PLASTICS' MOLDED NYLON / FASTENES CHANICAL TEST DATA - UNC - UNF MACHINE SCEWS ULTIMATE TOQUE NO TEST In Oz. 30 In Oz. 5 In Lbs. In Lbs. 7 In Lbs. 3 In Lbs. TABLE F BEFOE DEFOMATION NO TEST In Oz. 8-0 In Oz. -3 In Lbs. -4 In Lbs. 3-4 In Lbs. 9-0 In Lbs. OF CONTENTS FINDEX A-Z TENSILE TEST MAX TOQUE YIELD LBS. BEAK LBS Nylon / meets MIL-M093B "A" Type, LP40A, and ASTM D789- Type, GDE All test performed per ASTM specifications. Parts molded in Nylon /, dry as molded, unmoisturized, at 73 F/3 C. esults are average of random parts tested. DOUBLE SHEA YIELD LBS. BEAK LBS NO TEST HEX NUTS # # ECOENDED TOQUE SIZE TENSILE LBS. TENSILE TOQUE BEFOE DEFOMATION 5/ ,37 3,487 Test # Pull Test -Nylon Nut on Metal Screw In Lbs. 5. In Lbs..8 In Lbs. 7 In Lbs. 8 In Lbs. 9.3 In Lbs In Lbs. 74 In Lbs. 5.7 Ft Lbs..5 In Lbs. 4 In Lbs. 5 In Lbs. 5.5 In Lbs..5 In Lbs. 7 In Lbs. 4 In Lbs. 7 In Lbs. 3 Ft Lbs. 3.7 Ft.Lbs. 30 Ft Lbs. Test # Torque on Nylon Nut on Metal Screw CAP SCEWS TENSILE TEST DOUBLE SHEA MAX TOQUE ULTIMATE BEFOE YIELD BEAK YIELD BEAK SIZE TOQUE DEFOMATION LBS. LBS. LBS. LBS. 5/ In Lbs. 37 In Lbs. 49 In Lbs. Ft. Lbs. Ft. Lbs. 5- In Lbs In Lbs In Lbs. 7-8 Ft. Lbs. 8-9 Ft. Lbs TELEPHONE: (870) 453- / micro plastics, inc. FAX: (870)

167 TABLE F OF CONTENTS FINDEX A-Z MICO PLASTICS' MOLDED NYLON / FASTENES CHANICAL TEST DATA - TIC INFO Data listed if for informational purposes only shall not be used to establish specifications limits or used alone as the basis of design. MACHINE SCEWS TENSILE TEST DOUBLE SHEA MAX TOQUE ULTIMATE BEFOE YIELD BEAK YIELD BEAK SIZE TOQUE DEFOMATION LBS. LBS. LBS. LBS. M X.4 M.5 X 45 M3 X.5 M3.5 X. M4 X.7 M5 X.8 M X. M8 X.5 M0 X 50 NO TEST NO TEST.3 Nm..43 N..45Nm..93 Nm..83 Nm Nm. 5.3 Nm. NO TEST NO TEST.-. Nm Nm Nm Nm Nm Nm Nm. 7. N. 8.9 N. N. 53 N. 4 N. 7 N. 845 N..77 N. 749 N. N/B N/B N/B N/B N/B N/B 9 N. 744 N. N/B 89 N. 5 N. 94 N. 378 N. 00 N. 08 N. 80 N. 980 N. 50 N. N. 9 N. 39 N. 405 N. 3 N. 34 N. 877 N N. 580 N. HEX NUTS SIZE TENSILE ULTIMATE TOQUE M M.5 M3 M3.5 M4 M5 M M8 M0 NO TEST 35.3 N N N N N N N. 83. N. NO TEST NO TEST NO TEST.3 CM/KG 4.5 CM/KG CM/KG 5. CM/KG CM/KG NYLON / CHANICAL POPETIES ( 73 F / 3 C ) Tensile Strength Elongation Shear Strength Flexuaral Modulus Impact Strength Hardness Specific gravity Melting Point Dielectric Strength Underwriters Laboratory ating D38 D38 D73 D790 D D785 D79 D789 D49 BUL. 94,000psi 0% 9,00psi 40,000psi.0 ft/lb/in F 00 v/mil 94V 8.7 MPa 0%. MPa.,87 MPa 5.5 kg/cm M C 0 OHM-CM 94V mp@microplastics.com micro plastics, inc. WEBSITE: 7

168 F OF CONTENTS GENEAL INFOMATION TABLE FINDEX A-Z INFO TOLEANCES AND QUALITY OF INJECTION MOLDED NYLON SCEWS Micro Plastics' molded nylon components are accurately molded of Type / Nylon. They are tough, resistant to corrosion, light weight and good electrical insulators. Nylon components conform to irregular surfaces, provide vibration dampening, and offer an inexpensive alternative to more expensive metal parts. Molded threads approximate UNC/UNF A and B. Metric approximate g/h. Tolerances are generally held to Industrial Fasteners Institute Standards for inch and metric screws. However, it is often more sensible to try samples or small order quantities before changing from one product to another. Plastic molding has varying degrees of quality. If often involves small amounts of flash, knockout pin marks, gates, sinks, and other slight imperfections. Screws and bolts are gated on the threaded end. It is possible for the gate to leave an extra projection of up to.05" Nylon screws have been available for many years commercially. They are either machined on a screw machine or injection molded. The machined parts are made from extruded nylon rod stock and can be held to relatively close tolerances during the machining process. Nylon, however, has the unfortunate property of absorbing moisture from its environment which causes significant changes in its dimensions. So even though parts may have been accurately machined, a moist atmosphere can cause fit problems. Conversely, parts that have been moisture conditioned can lose moisture causing dimensional problems. If the overall length of a screw grows, it obviously affects the threads per inch thus causing a tight fit. Changes in the moisture content can also have an affect on the outside diameter, pitch diameter and the root diameter. Injection molded nylon screws also suffer from moisture problems but in addition, have inherent tooling problems. All molded nylon screws come from mold cavities parted along the length of the screw. These cavities have two halves that must be matched exactly to produce a perfect part. The cavity halves are doweled together with leader pins when the mold closes to provide the match required. Other locking devices are also employed to hold the halves of the mold in alignment. In the course of molding production quantities, these leader pins and locks suffer some wear. The mold base holding the cavities wears. The molding machine wears causing slight press platen misalignment. Small amounts of dirt on the mold can cause slight mismatch. From the time the tooling begins to run in production, the entire process begins to work against perfect alignment. Mold temperature changes from room temperature to production temperature causes the mismatch condition to worsen. At some point in time, the various factors affecting mismatch reach a condition that causes the molded screw to be unsatisfactory for the user. Then it is necessary to rework the mold to bring it up to its original condition. Since nylon is somewhat flexible, generally molded nylon screws are not held to as quite close tolerances as metal screws. A slight mismatch and minor flash at the parting line is not as serious as it would be in a metal part. End users who submit nylon screws to go-no go gages without trying the fastener in its actual functional application are generally causing unnecessary difficulties for themselves and their supplier. The fact is that because of the many areas of potential process variables, nylon screws made by injection molding are simply not measurable by the same methods as metal screws. They just are not capable of being manufactured to as close tolerances as metal screws. The development of the tooling for nylon screws, plus the molded conditions, is a carefully kept secret. Tooling such as this is an evolutionary process. The quality of parts being manufactured today with today s tooling is obviously superior to those made in the beginning. Slight improvements have gradually been made over the years. Since we have production tooling for nearly 3,000 sizes, if we make tooling improvements it is not practical to go back and remake 3,000 molds each time we make an improvement. We do, however, rework and replace as we go along any obviously unsatisfactory tooling. This is a continual process with new sizes being added constantly and at the same time remaking tooling whenever the circumstances require it. Occasionally, a few unacceptable parts may escape our quality control procedures. If you receive unsuitable parts, let us know immediately. We will do whatever we can to correct the them. All nylon screws are molded in a natural color resin. If you require black color, or some other identifying color (not a color match) these parts are made by dyeing the nylon screw with IT dye in a water solution held at about 00 o F. which adds color but also moisture to the nylon. As stated previously, nylon screws change considerably with the loss or gain of moisture. Nylon screw, as they come from the molding machine contain about.5% moisture, After dyeing in a IT dye, the moisture content increases to about 3-4%. Low moisture nylon is more rigid than moisture conditioned material. Impact strength and toughness increases with moisture addition. Flexibility also increases with higher moisture content which causes difficulties for the user on occasion. If you need a solid molded color, a closer than normal tolerance a special grade of nylon or other plastic material, we can furnish whatever variation or specialty using special molds and set up. This, of course, adds considerably to the cost. We are here to serve you, so tell us what you need. TOLEANCES OF INJECTION MOLDED NYLON STANDAD COMPONENTS +/-.005 ON DINSIONS THU.5 +/-.3 ON DINSIONS THU /-.008 ON DINSIONS FOM. THU.000 +/-.0 ON DINSIONS FOM 5.89 THU 5.4 +/-.00 ON DINSIONS FOM.00 THU.500 +/-.5 ON DINSIONS FOM 5.4 THU /-.05 ON DINSIONS LAGE THAN.500 +/-.38 ON DINSIONS LAGE THAN 38.O +/-.05 ON FACTIONAL DINSIONS 8 TELEPHONE: (870) 453- / micro plastics, inc. FAX: (870)

169 TABLE F OF CONTENTS TEMS FINDEX A-Z MINIMUM ODE $00.00 MINIMUM LINE CHAGE $0.00 INFO PLEASE MAK ALL TELEPHONE ODES CONFIMING TO AVOID POSSIBLE DUPLICATION. General - % 0 net 30. FOB Flippin, Arkansas, No transportation allowed. Shipping method to be at seller s discretion unless buyer specifies routing. Shipments will not be insured unless requested by buyer. Buyer will bear cost of insurance and any other unusual transportation cost. Orders will be acknowledged with our standard terms of sale current at the time order is placed. Prices - Quantity prices apply only to orders for parts which can be produced in one production run and are scheduled for release within a 0 day period from the first scheduled production run. Prices - We reserve the right to increase prices when a careful review of our costs indicates a need for additional revenue. Tooling - We will maintain tooling for a reasonable time in accordance with good industry practice. Molds that will not produce acceptable parts after reasonable maintenance will be subject to negotiation. Tooling is not insured unless specifically requested. In those cases an additional charge will be made for insurance cost. Delivery - Unless otherwise specifically provided in writing, delivery of the products hereunder shall be FOB point of shipment, In all cases, risk of loss or damage to goods in transit shall fall upon the purchaser, whose responsibility it shall be to file claims with the carrier. Shipping dates are approximate and are based upon the prompt receipt of all necessary information. We shall not be liable for delay in delivery due to causes beyond our reasonable control. Cancellation - Orders are not subject to cancellation, change, reduction in amount, or suspension of deliveries except with our consent and upon terms which protect us from loss. Patents - The Purchaser shall hold us harmless against any expense or loss resulting from infringement of patents or trademarks arising from compliance with Purchaser s designs or specifications or instructions. Quantity - All parts are accurately counted on sophisticated electronic scales compensated for slight weight variations due to minor mold cavity differentials. Custom part shipments are subject to a +/- 0% order quantity variation. eturned Material Authorization - If parts are found to deviate beyond tolerances, mail samples back to us with your report, we will then, upon our findings issue a MA number. NO MATEIAL will be accepted for credit without a MA. Unauthorized returns will be shipped back and reinvoiced with a minimum handling charge of $50.00 added. Claims - Inspect all shipments within 5 days of the date of shipment. Failure to advise us of defects on shipments within the 5-day period will constitute acceptance of the shipment. Any purchase order with terms or clauses which are in conflict with the terms listed above, and/or any order with terms other than those listed herein is voidable by Micro Plastics, Inc. We reserve the right to discontinue items, change specifications or design at any time without notice and without incurring any obligations. CAUTION: All shipments are moisture packed. Do not open sealed package until use, reseal after opening. mp@microplastics.com micro plastics, inc. WEBSITE: 9