Q TABLE PREVIOUS PAGE F OF CON TEN TS N EXT PAGE

Transcription

1 PEVIOUS PAGE O CON TEN TS IN DEX A-Z

2 Q TABLE PEVIOUS PAGE O CON TEN TS TABLE O CONTENTS IN DEX A-Z PEIX TABLE O CONTENTS GENEAL INOMATION TEM S ALPHABETICAL INDEX I PESS-LOC THUMB SCEW KNOBS PAGES - PAGE 3 II XII - TIC PAGES 9 - SCEWS, BOLTS, AND THEADED OD PAGES 5-3 PAGE TELEPHONE: (70) 53- / 53- micro plastics, inc. AX: (70) 53-7

3 PEVIOUS PAGE O CON TEN TS TABLE O CONTENTS IN DEX A-Z COM PANY POILE INSET BETWEEN PAGES AND 5 M ECHANICAL TEST DATA UNC/UN M ECHANICAL TEST DATA M ETIC ETUN EPLY CAD INSET BETWEEN PAGES AND 5 PEIX SCEWS, BOLTS, AND THEADED OD PAGES 5-3 II PAGE , mpsales@microplastics.com micro plastics, inc. WEBSITE: 3

4 Q PEVIOUS PAGE TABLE O CON TEN TS TABLE O CONTENTS IN DEX A-Z PEIX TABLE O CONTENTS GENEAL INOMATION TEM S ALPHABETICAL INDEX III UNIVESAL NUTS PAGES 37 - XIII - TIC PAGES - PAGE 39, IV XIV - TIC PAGE 3 WASHES, SHOULDE WASHES AND SCEW INSULATOS PAGES - PAGE TELEPHONE: (70) 53- / 53- micro plastics, inc. AX: (70) 53-7

5 Q PEVIOUS PAGE TABLE O CON TEN TS TABLE O CONTENTS IN DEX A-Z COM PANY POILE INSET BETWEEN PAGES AND 5 M ECHANICAL TEST DATA UNC/UN M ECHANICAL TEST DATA M ETIC ETUN EPLY CAD INSET BETWEEN PAGES AND 5 PEIX XV - TIC PAGE SPACES PAGES 7-3 V PAGE PANEL ASTENES AND HOLE PLUGS PAGES - 03 VI PAGE mpsales@microplastics.com micro plastics, inc. WEBSITE: 5

6 Q PEVIOUS PAGE TABLE O CON TEN TS TABLE O CONTENTS IN DEX A-Z PEIX TABLE O CONTENTS GENEAL INOMATION TEM S ALPHABETICAL INDEX VI PANEL ASTENES AND HOLE PLUGS PAGES - 03 PAGE TELEPHONE: (70) 53- / 53- micro plastics, inc. AX: (70) 53-7

7 Q PEVIOUS PAGE TABLE O CON TEN TS TABLE O CONTENTS IN DEX A-Z COM PANY POILE INSET BETWEEN PAGES AND 5 M ECHANICAL TEST DATA UNC/UN M ECHANICAL TEST DATA M ETIC ETUN EPLY CAD INSET BETWEEN PAGES AND 5 PEIX WIE HANDLING HADWAE AND ACCESSOIES PAGES 0-7 VII PAGE mpsales@microplastics.com micro plastics, inc. WEBSITE: 7

8 Q PEVIOUS PAGE TABLE O CON TEN TS TABLE O CONTENTS IN DEX A-Z PEIX TABLE O CONTENTS GENEAL INOMATION TEM S ALPHABETICAL INDEX VII WIE HANDLING HADWAE AND ACCESSOIES PAGES 0-7 PAGE , TELEPHONE: (70) 53- / 53- micro plastics, inc. AX: (70) 53-7

9 Q PEVIOUS PAGE TABLE O CON TEN TS TABLE O CONTENTS IN DEX A-Z COM PANY POILE INSET BETWEEN PAGES AND 5 M ECHANICAL TEST DATA UNC/UN M ECHANICAL TEST DATA M ETIC ETUN EPLY CAD INSET BETWEEN PAGES AND 5 PEIX CICUIT BOAD HADWAE PAGES - 37 VIII PAGE mpsales@microplastics.com micro plastics, inc. WEBSITE: 9

10 Q PEVIOUS PAGE TABLE O CON TEN TS TABLE O CONTENTS IN DEX A-Z PEIX TABLE O CONTENTS GENEAL INOMATION TEM S ALPHABETICAL INDEX VIII CICUIT BOAD HADWAE PAGES - 37 PAGE IX HOSE CLAMPS AND INSTALLATION TOOLS PAGE 3, 39 PAGE TELEPHONE: (70) 53- / 53- micro plastics, inc. AX: (70) 53-7

11 Q PEVIOUS PAGE TABLE O CON TEN TS TABLE O CONTENTS IN DEX A-Z COM PANY POILE INSET BETWEEN PAGES AND 5 M ECHANICAL TEST DATA UNC/UN M ECHANICAL TEST DATA M ETIC ETUN EPLY CAD INSET BETWEEN PAGES AND 5 PEIX CABLE TIES AND MOUNTING HADWAE PAGES 0 - X PAGE 0 XVI - TIC PAGE 5 ASTENE ASSOTNTS PAGES 3 - XI PAGE 3- mpsales@microplastics.com micro plastics, inc. WEBSITE:

12 I Q PEVIOUS PAGE TABLE PLASTIC HEADS AE MOLDED ONTO ZINC PLATED STEEL ALLOY SOCKET HEAD CAP SCEWS. O CON TEN TS PESS-LOC THUMB SCEW KNOBS IN DEX A-Z WING HEAD - KNOBS PESSES ONTO ANY STD. SOCKET HEX CAP SCEW. ITEM SPECIICATIONS NUMBE ITS SCEW W T D 9W00 # 0 " " 7/" 9W0-7/" /3" 7/3" 9W5 5/ -/" 3/3" " 9W03-5/3" 3/" 7/" TOLEANCES +/-.03 WING HEAD - SCEW ITEM NUMBE SCEW SIZE SCEW LENGTH HEAD DIA. 9W00S037 9W00S050 9W00S075 9W00S00 9W00S50 9W0S050 9W0S075 9W0S00 9W0S50 9W5S050 9W5S075 9W5S00 9W5S50 9W03S075 9W03S00 9WO3S /- 5/- 5/- 5/ MOLDED ONTO ZINC PLATED STEEL ALLOY SOCKET HEAD CAP SCEW. " /" " " -/" /" " " -/" /" " " -/" " " -/" " " " " " -" -" -" -" -/" -/" -/" -/" -" -" -" COLO CODES M UST BE INCLUDED WITH THE ITEM NUMBE WHEN ODEING! B - BLACK D - ED WT - WHITE BL - BLUE G - GEEN LOWEETTE - KNOBS PESSES ONTO ANY STD. SOCKET HEX CAP SCEW. TOLEANCES +/-.03 ITEM SPECIICATIONS NUMBE ITS SCEW T D LOWEETTE - SCEW ITEM NUMBE SCEW SIZE SCEW LENGTH HEAD DIA. 90S050-0 /" -/" 90S075 90S00 90S50 95S050 95S075 95S00 95S50 903S S00 903S50 5/ /- 5/- 5/- 5/ " " " " " -/" /" " " -/" " " -/" /" 9/3" 5/" MOLDED ONTO ZINC PLATED STEEL ALLOY SOCKET HEAD CAP SCEW. -/" -/" -/" -/" -/" -/" -/" -/" -/" -/" TELEPHONE: (70) 53- / 53- micro plastics, inc. AX: (70) 53-7

13 STANDAD - OUND HEAD - KNOB ITEM SPECIICATIONS NUMBE ITS SCEW A B C 900 # 5/" /" 9/3" Q TABLE PEVIOUS PAGE # # # 0 5/ TOLEANCES +/-.03 " /" /3" " " " PESS-LOC THUMB SCEW KNOBS PESSES ONTO ANY STD. SOCKET HEX CAP SCEW. 3/" 7/3" " 5/" /" 5/" O CON TEN TS /" " 7/" /" /" 9/3" M ETIC - OUND HEAD - KNOB PESSES ONTO ANY STD. SOCKET HEX CAP SCEW. I ITEM SPECIICATIONS NUMBE ITS SCEW A B C 9M300 M 3 9,53 5,,33 9M00 9M500 9M00 9M0 9M0 IN DEX A-Z M M 5 M M M,70,0 9,05 5,0 5,0 5,5,35 7,93,33 9,9 TOLEANCES +/-.03 9,53 0,7,70,70 5,0 OUND HEAD DAWING O: STANDAD HEAD DIA. TIC HEAD DIA. 5/" THOUGH " 9,53 THOUGH 9,05 STANDAD - OUND HEAD - SCEW ITEM NUMBE SCEW SIZE SCEW LENGTH HEAD DIA. 900S05-0 " 5/" 900S S S05 900S S S S S S00 900S S S S00 900S50 97S050 97S075 97S00 97S50 9S050 9S075 9S00 9S50 95S050 95S075 95S00 95S50 MOLDED ONTO ZINC PLATED STEEL ALLOY SOCKET HEAD CAP SCEW /- 5/- 5/- 5/- /" " " /" " " /" " " " /" " " -/" /" " " -/" /" " " -/" /" " " -/" NOTE: PESS LOC THUMB SCEWS AE DESIGNED TO BE HAND TIGHTENED. 5/" 5/" " " " /" /" /" /" " " " " " " " " " " " " " " " " " M ETIC - OUND HEAD - SCEW ITEM NUMBE SCEW SIZE SCEW LENGTH HEAD DIA. 9M M M M M M M M M M M M M M M0000 9M0000 9M M M M000 9M000 9M0000 9M0005 9M0000 9M050 9M050 9M0500 9M0505 9M0500 M 3 M 3 M 3 M 3 M M M M M M 5 M 5 M 5 M 5 M 5 M M M M M M M M M M M M M M M OUND HEAD DAWING O: STANDAD HEAD DIA. M M 0 M M M 0 M M M 0 M 5 M M M 0 M 5 M 0 M M M 0 M 5 M 0 M M M 0 M 5 M 0 M M M 0 M 5 M 0 TIC HEAD DIA. " 5,0 MOLDED ONTO ZINC PLATED STEEL ALLOY SOCKET HEAD CAP SCEW. 9,53 9,53 9,53 9,53,70,70,70,70, ,05 9,05 9,05 9,05 9,05 5,0 5,0 5,0 5,0 5,0 5,0 5,0 5,0 5,0 5,0 mpsales@microplastics.com micro plastics, inc. WEBSITE: 3

14 PEVIOUS PAGE O CON TEN TS PESS-LOC THUMB SCEW KNOB ASSOTNT KITS IN DEX A-Z I LOWEETTE PIECE WING 3 PIECE OUND 70 PIECE OUND 30 PIECE ASSOTM ENT CONSISTS O APPOX: - " - 5/" - " ASSOTM ENT CONSISTS O APPOX: 7 - " 7-5/" 7 - " 90 - # 0 ASSOTM ENT CONSISTS O APPOX: 0-5/" 0 - X " 00 - X " 00 - # # 00 - # 00 - # ASSOTM ENT CONSISTS O APPOX: 0-5/" 0 - X " 75 - X " 75 - # # 50 - # 50 - # Assorted Colors OASOPL Assorted Colors Assorted Colors Assorted Colors OASO3WPL OASO70PL OASO30PL EASY TO ASSEMBLE INSTANT THUMB SCEWS.... MICO PLASTICS' PESS-LOC THUMB SCEW KNOBS CAN BE ASSEM BLED TO THE APPOPIATE SIZE SOCK- ET HEXAGON HEAD CAP SCEW IN VAIOUS WAYS DE- PENDING ON THE VOLUM E O PATS TO BE ASSEM- BLED. SIM PLY ALIGN THE SOCKET CAP SCEW WITH THE MATCHING COUNTEBOE POVIDED IN THE PESS-LOC KNOB, PLACE THIS ASSEM BLY BETWEEN THE CLAM PING JAWS O THE ASSEM BLY DEVICE AND POVIDE ENOUGH OCE TO PESS THE KNOB COM- PLETELY OVE THE HEAD O THE SCEW. ANY DEVICE THAT POVIDES A POSITIVE CLAM PING OCE, SUCH AS A BENCH VISE, ABO PESS, O EVEN VISE GIP TYPE PLIES, O SMALL QUANTITIES WILL PEOM THE ASSEM BLY. A SMALL O THIN CADBOAD O SMOOTH PLASTIC PLACED BETWEEN THE TOP SUACE O THE PESS-LOC KNOB AND THE CLAMPING JAW IS ECOENDED TO PEVENT MAING O THE KNOB SUACE. TELEPHONE: (70) 53- / 53- micro plastics, inc. AX: (70) 53-7

15 PEVIOUS PAGE O CON TEN TS IN DEX A-Z SCEWS, BOLTS, AND THEADED OD POTECT INSULATE ISOLATE The shear strength of heat-treated steel. The Dielectric insulation, corrosion resistance and vibration resistance of nylon. II OUND - CODE "" Thread Size -0 Head diameter Head height A perfect combination to replace: *costly brass and stainless steel fasteners. *costly multiple component insulated screw assemblies. *costly sleeved and cladded screws. *marginal standard nylon fastener applications. Metal Core Screws are recommended in applications requiring electrical, thermal and vibration insulation in shear or double shear connections. These reinforced screws will provide up to times strength of standard nylon fasteners. OUND WASHE - CODE "W" Thread Size -0 Head diameter Head height Washer thickness Washer diameter NYLON SHELL Nylon Natural High dielectric resistance Corrosion resistant Vibration, abrasion resistant EINOCING COE *High strength, high carbon C.H.Q. steel. *Precision cold formed and knurled. *Electro zinc or cadmium plated. The reinforcing core incorporates a recessed metal head that permits tightening with high speed, high torque automatic drives. Due to the corrosion resistant nature of the nylon, the Metal core Screws can, in certain applications, replace expensive stainless steel, brass and Monel fasteners at a substantial cost savings. ILLISTE - CODE "" Thread Size -0 Head diameter Head height LAT - CODE "A" Thread Size -0 Head diameter Head height The insulating quality of the nylon shell makes the Metal Core Screws an ideal choice for areas where cathodic or thermal transfer is a problem. ITEM NUMBE SIZE DESCIPTION (,35) Metal Core (9,53) Metal Core / (,70) Metal Core (9,53) Metal Core / (,70) Metal Core (9,53) Metal Core / (,70) Metal Core (9,05) Metal Core (5,0) Metal Core (9,53) Metal Core / (,70) Metal Core (5,) Metal Core (9,05) Metal Core (5,0) Metal Core TIC SIZES AVAILABLE ON APPLICATION NOTE: SPECIY HEAD STYLE CODE LETTE. EXAM PLE: X /" OUND HEAD= MAX TOQUE TENSILE TEST DOUBLE SHEA SIZE BEOE ULTIMATE YIELD BEAK YIELD BEAK DEOMATION TOQUE LBS. LBS. LBS. LBS. In. Lbs..5 In. Lbs In. Lbs. In. Lbs In. Lbs. In. Lbs In. Lbs. 3 In. Lbs mpsales@microplastics.com micro plastics, inc. WEBSITE: 5

16 PEVIOUS PAGE O CON TEN TS IN DEX A-Z SCEWS, BOLTS, AND THEADED OD II BINDE SLOTTED HEADSTYLE PAT NUMBE THEAD LENGTH 00B009 3/3 00B0 00B05 00B0 00B05 00B0 00B03 00B037 00B039 00B03 00B050 00B05 00B0 00B075 00B07 00B00 00B 00B0 00B B050 00B009 00B0 00B0 00B0 00B05 00B0 00B03 00B037 00B03 00B050 00B05 00B0 00B0 00B075 00B07 00B00 00B 00B 00B5 3 / 5/3 3/ 9/3 5/ 5/ 7/ / 9/ / 3/ / 3/3 / 9/ 3/ 9/3 5/ 7/ / 9/ / / 3/ THEAD SIZE A H J T PAT NUMBE THEAD LENGTH PAT NUMBE THEAD LENGTH PAT NUMBE THEAD LENGTH 00B37 00B050 / 0B00 00B50 00B 00B75 00B05 00B009 00B0 00B05 00B0 00B05 00B03 00B037 00B03 00B050 00B05 00B0 00B0 00B075 00B07 00B00 00B 00B5 00B50 00B 00B75 00B7 00B00 00B5 000B05 000B B B00 00B0 00B0 00B05 00B0 00B03 00B037 00B / 3/3 / 5/3 3/ 5/ 7/ / 9/ / / / 7/ / 3/ 9/3 5/ 7/ Nominal Screw Size Nominal Screw Length Up to / in., incl Over / to in., incl Over to in., incl Over in. 00B0 00B075 00B07 00B00 00B 00B5 00B37 00B50 00B75 00B7 00B00 00B0 00B0 00B05 00B03 00B037 00B050 00B0 00B075 00B00 00B5 00B50 0B0 0B0 0B05 0B03 0B037 0B03 0B050 0B0 0B075 0B0 0B07 0B00 0B0 0B5 0B50 0B thru 00 Tolerance on Length / / 7/ / 3/ 5/ / / / 3/ 5/ 7/ / 3/ -/ / 0 thru thru B05 050B03 050B B B0 050B B07 050B00 050B5 050B50 050B75 050B00 050B50 05B0 05B05 05B037 05B0 05B075 05B / / / / 3/ TELEPHONE: (70) 53- / 53- micro plastics, inc. AX: (70) 53-7

17 PEVIOUS PAGE O CON TEN TS IN DEX A-Z SCEWS, BOLTS, AND THEADED OD II ILLISTE SLOTTED HEADSTYLE PAT NUMBE THEAD LENGTH / / 5/3 3/ 9/3 5/ 5/ 7/ / 9/ / 3/ / 3/ 5/ 7/ / 5/ / 3/3 / 9/ 3/ 9/3 5/ 7/ / THEAD SIZE A H J T PAT NUMBE THEAD LENGTH PAT NUMBE THEAD LENGTH PAT NUMBE THEAD LENGTH / / / / 3/ / 3/3 / 5/3 3/ 5/ 7/ / 9/ / / / 7/ Nominal Screw Size Nominal Screw Length Up to / in., incl Over / to in., incl Over to in., incl Over in thru 00 Tolerance on Length / 3/ 9/3 5/ 7/ / / / 7/ / 3/ 5/ / / / 3/ 5/ 7/ 0 thru thru / / / 5/ / / / 3/ mpsales@microplastics.com micro plastics, inc. WEBSITE: 7

18 PEVIOUS PAGE O CON TEN TS IN DEX A-Z SCEWS, BOLTS, AND THEADED OD II HEX SLOTTED HEADSTYLE PAT NUMBE THEAD LENGTH 00X009 3/3 00X0 00X05 00X0 00X05 00X0 00X03 00X037 00X039 00X03 00X050 00X05 00X0 00X075 00X07 00X00 00X 00X0 00X X050 00X009 00X0 00X0 00X0 00X05 00X0 00X03 00X037 00X03 00X050 00X05 00X0 00X0 00X075 00X07 00X00 00X 00X 00X5 3 / 5/3 3/ 9/3 5/ 5/ 7/ / 9/ / 3/ / 3/3 / 9/ 3/ 9/3 5/ 7/ / 9/ / / 3/ THEAD SIZE A W H J T MIN.0 MIN.7 MIN.7 MIN.30 MIN.30 MIN.09 MIN PAT NUMBE THEAD LENGTH PAT NUMBE THEAD LENGTH PAT NUMBE THEAD LENGTH 00X37 00X050 / 0X00 00X50 00X 00X75 00X05 00X009 00X0 00X05 00X0 00X05 00X03 00X037 00X03 00X050 00X05 00X0 00X0 00X075 00X07 00X00 00X 00X5 00X50 00X 00X75 00X7 00X00 00X5 000X05 000X X X00 00X0 00X0 00X05 00X0 00X03 00X037 00X / 3/3 / 5/3 3/ 5/ 7/ / 9/ / / / 7/ / 3/ 9/3 5/ 7/ Nominal Screw Size Nominal Screw Length Up to / in., incl Over / to in., incl Over to in., incl Over in. 00X0 00X075 00X07 00X00 00X 00X5 00X37 00X50 00X75 00X7 00X00 00X0 00X0 00X05 00X03 00X037 00X050 00X0 00X075 00X00 00X5 00X50 0X0 0X0 0X05 0X03 0X037 0X03 0X050 0X0 0X075 0X0 0X07 0X00 0X0 0X5 0X50 0X thru 00 Tolerance on Length / / 7/ / 3/ 5/ / / / 3/ 5/ 7/ / 3/ / / 0 thru thru X05 050X03 050X X X0 050X X07 050X00 050X5 050X50 050X75 050X00 050X50 05X0 05X05 05X037 05X050 05X0 05X075 05X / / / / 3/ / TELEPHONE: (70) 53- / 53- micro plastics, inc. AX: (70) 53-7

19 PEVIOUS PAGE O CON TEN TS IN DEX A-Z SCEWS, BOLTS, AND THEADED OD II HEX UNSLOTTED HEADSTYLE PAT NUMBE THEAD LENGTH 00H009 3/3 00H0 00H05 00H0 00H05 00H0 00H03 00H037 00H039 00H03 00H050 00H05 00H0 00H075 00H07 00H00 00H 00H0 00H H0 003H0 003H05 003H03 003H H03 003H H H03 003H050 00H009 00H0 00H0 00H0 00H05 00H0 00H03 00H037 00H03 00H / 5/3 3/ 9/3 5/ 5/ 7/ / 9/ / 3/ / 3/ 5/ 7/ / 5/ / 3/3 / 9/ 3/ 9/3 5/ 7/ / THEAD SIZE A W H PAT NUMBE THEAD LENGTH PAT NUMBE THEAD LENGTH PAT NUMBE THEAD LENGTH 00H05 9/ 000H H0 00H0 00H0 00H075 00H07 00H00 00H 00H 00H5 00H37 00H50 00H 00H75 00H05 00H009 00H0 00H05 00H0 00H05 00H03 00H037 00H03 00H050 00H05 00H0 00H0 00H075 00H07 00H00 00H 00H5 00H50 00H 00H75 00H7 00H00 00H5 000H05 000H037.3 min..0 min..0 min..7 min..7 min..30 min..30 min..09 min / / 3/ / 3/3 / 5/3 3/ 5/ 7/ / 9/ / / / 7/ Nominal Screw Size Nominal Screw Length Up to / in., incl Over / to in., incl Over to in., incl Over in. 000H00 00H0 00H0 00H05 00H0 00H03 00H037 00H03 00H050 00H0 00H075 00H07 00H00 00H 00H5 00H37 00H50 00H75 00H7 00H00 00H0 00H0 00H05 00H03 00H037 00H050 00H0 00H075 00H00 00H5 00H50 0H0 0H0 0H05 0H03 0H037 0H03 0H050 mpsales@microplastics.com micro plastics, inc. WEBSITE: thru 00 Tolerance on Length / 3/ 9/3 5/ 7/ / / / 7/ / 3/ 5/ / / / 3/ 5/ 7/ / 0 thru thru H075 0H0 0H07 0H00 0H0 0H5 0H50 0H75 0H00 050H05 050H03 050H H H0 050H H07 050H00 050H5 050H50 050H75 050H00 050H50 05H0 05H05 05H037 05H0 05H075 05H / / / 5/ / / / 3/

20 PEVIOUS PAGE O CON TEN TS IN DEX A-Z SCEWS, BOLTS, AND THEADED OD II PAN SLOTTED HEADSTYLE PAT NUMBE THEAD LENGTH 00P05 00P P05 007P050 00P00 00P009 00P0 00P05 00P0 00P05 00P0 00P03 00P037 00P039 00P03 00P050 00P05 00P0 00P075 00P07 00P00 00P 00P0 00P P050 00P009 00P0 00P0 00P0 00P05 00P0 00P03 00P037 00P03 00P050 00P05 00P0 00P0 00P / / 3/3 / 5/3 3/ 9/3 5/ 5/ 7/ / 9/ / 3/ / 3/3 / 9/ 3/ 9/3 5/ 7/ / 9/ / THEAD SIZE A H J T 0 5/ PAT NUMBE THEAD LENGTH PAT NUMBE THEAD LENGTH PAT NUMBE THEAD LENGTH 00P07 00P05 0P00 00P00 00P 00P 00P5 00P37 00P50 00P 00P75 00P05 00P009 00P0 00P05 00P0 00P05 00P03 00P037 00P03 00P050 00P05 00P0 00P0 00P075 00P07 00P00 00P 00P5 00P50 00P 00P75 00P7 00P00 00P5 000P05 000P P P00 00P0 00P / 3/ / 3/3 / 5/3 3/ 5/ 7/ / 9/ / / / 7/ / 3/ Nominal Screw Size Nominal Screw Length Up to / in., incl Over / to in., incl Over to in., incl Over in. 00P0 00P03 00P037 00P03 00P050 00P0 00P075 00P07 00P00 00P 00P5 00P37 00P50 00P75 00P7 00P00 00P0 00P0 00P05 00P03 00P037 00P050 00P0 00P075 00P00 00P5 00P50 0P0 0P0 0P05 0P03 0P037 0P03 0P050 0P0 0P075 0P0 0P thru 00 Tolerance on Length /3 5/ 7/ / / / 7/ / 3/ 5/ / / / 3/ 5/ 7/ / 3/ 0 thru thru P0 0P5 0P50 0P75 0P00 050P05 050P03 050P P P0 050P P07 050P00 050P5 050P50 050P75 050P00 050P50 05P0 05P05 05P037 05P0 05P075 05P00 03P /- / / 5/ / / / 3/ 0 TELEPHONE: (70) 53- / 53- micro plastics, inc. AX: (70) 53-7

21 PEVIOUS PAGE O CON TEN TS IN DEX A-Z SCEWS, BOLTS, AND THEADED OD II OUND SLOTTED HEADSTYLE PAT NUMBE THEAD LENGTH P / / 3/3 / 5/3 3/ 9/3 5/ 7/ / 9/ / 3/ / 3/ 5/ 7/ / 5/ / 3/3 / 9/ 3/ 9/3 THEAD SIZE A H J T PAT NUMBE THEAD LENGTH PAT NUMBE THEAD LENGTH PAT NUMBE THEAD LENGTH / 007 7/ / / 9/ / / 3/ / / 3/3 / 5/3 3/ 5/ 7/ / 9/ / / / Nominal Screw Size Nominal Screw Length Up to / in., incl Over / to in., incl Over to in., incl Over in thru 00 Tolerance on Length / 3/ 9/3 5/ 7/ / / / 7/ / 3/ 5/ / / / 3/ 0 thru thru / 7/ / 3/ / / 5/ / / / 3 3/ mpsales@microplastics.com micro plastics, inc. WEBSITE:

22 PEVIOUS PAGE O CON TEN TS IN DEX A-Z SCEWS, BOLTS, AND THEADED OD II SET SLOTTED HEADSTYLE PAT NUMBE THEAD LENGTH 00S00 / 00S009 00S0 00S05 00S0 00S05 00S0 00S03 00S037 00S03 00S050 00S05 00S0 00S075 00S07 00S00 00S 00S0 00S B050 00S009 00S0 00S0 00S05 00S0 00S05 00S0 00S03 00S03 00S03 00S050 00S05 00S0 00S0 00S075 00S07 00S00 00S 00S 3 3/3 / 5/3 3/ 9/3 5/ 7/ / 9/ / 3/ / 3/3 / 9/ 5/3 3/ 9/3 5/ 7/ / 9/ / / 3/ THEAD SIZE A H J T 0 5/ PAT NUMBE THEAD LENGTH PAT NUMBE THEAD LENGTH PAT NUMBE THEAD LENGTH 00S5 00S03 7/ 0S00 00S37 00S50 00S 00S75 00S05 00S009 00S0 00S05 00S0 00S05 00S03 00S037 00S03 00S050 00S05 00S0 00S0 00S075 00S07 00S00 00S 00S5 00S50 00S 00S75 00S7 00S00 093S55 000S05 000S S S00 00S0 00S0 00S05 00S0 00S03 00S / 3/3 / 5/3 3/ 5/ 7/ / 9/ / / / 7/ / 3/ 9/3 5/ 00S050 00S0 00S075 00S07 00S00 00S 00S5 00S37 00S50 00S75 00S7 00S00 00S0 00S0 00S05 00S03 00S037 00S050 00S0 00S075 00S00 00S5 00S50 0S0 0S0 0S05 0S03 0S037 0S050 0S0 0S075 0S0 0S07 0S00 0S0 0S5 0S50 0S75 Nominal Screw Size Nominal Screw Length Up to / in., incl Over / to in., incl Over to in., incl Over in thru 00 / / / 7/ / 3/ 5/ / / / 3/ 5/ / 3/ / / Tolerance on Length thru thru S05 050S03 050S S S0 050S S07 050S00 050S5 050S50 050S75 050S00 050S50 05S0 05S05 05S037 05S0 05S075 05S S03* / / / / 3/ 5/ 03S0 5/- 3/ *SLOT IS IN THEADS TELEPHONE: (70) 53- / 53- micro plastics, inc. AX: (70) 53-7

23 PEVIOUS PAGE O CON TEN TS IN DEX A-Z SCEWS, BOLTS, AND THEADED OD II SOCKET SET HEADSTYLE PAT NUMBE THEAD LENGTH 003T050 3 / 00T009 00T0 00T0 00T05 00T0 00T05 00T0 00T03 00T037 00T03 00T050 00T05 00T0 00T0 00T075 00T07 00T00 00T 00T 00T5 00T37 00T50 00T 00T75 00T05 00T009 00T0 00T05 00T0 00T05 00T03 00T037 00T03 00T050 00T05 00T0 00T0 00T075 3/3 / 9/ 5/3 3/ 9/3 5/ 7/ / 9/ / / 3/ / 3/3 / 5/3 3/ 5/ 7/ / 9/ / THEAD SIZE J T PAT NUMBE THEAD LENGTH PAT NUMBE THEAD LENGTH PAT NUMBE THEAD LENGTH 00T07 00T0 0 05T075-00T00 00T 00T5 00T50 00T 00T75 00T7 00T00 00T5 000T05 000T T T00 00T0 00T0 00t05 00T0 00T03 00T037 00T03 00T050 00T0 00T075 00T07 00T00 00T 00T5 00T37 00T50 00T75 00T7 00T00 00T0 00T0 00T05 00T03 00T037 00T050 THEAD SIZE J T / / / / 7/ / 3/ 9/3 5/ 7/ / / / 7/ / 3/ 5/ / Nominal Screw Size Nominal Screw Length, in. Up to 0.3, incl Over 0.3 to.00, incl Over.00 to.00, incl Over.00 00T075 00T00 00T5 00T50 0T0 0T0 0T05 0T03 0T037 0T03 0T050 0T0 0T075 0T0 0T07 0T00 0T0 0T5 0T50 0T75 0T00 050T05 050T03 050T T T0 050T T07 050T00 050T5 050T50 050T75 050T00 050T50 05T0 05T05 05T037 05T / / 3/ 5/ 7/ / 3/ / / 5/ / / / 3/ 0 thru Tolerance on Length +/ / / / T00 03T050 03T075 03T T T T T T T T5 05T050 05T075 05T00 05T T05-5/- 5/- 5/ /-3 /-3 /-3 / / / / / / Due to the small head style, the longer lengths offered may not support the normal torque required for a Set Screw. We recommend that you test samples prior to production purchases. NOTE: LONG SLOTTED SET SCEWS - OVE / --0 OVE mpsales@microplastics.com micro plastics, inc. WEBSITE: 3

24 PEVIOUS PAGE O CON TEN TS IN DEX A-Z SCEWS, BOLTS, AND THEADED OD II PHILLIPS PAN HEADSTYLE PAT NUMBE THEAD LENGTH 00W00 / 00W009 00W0 00W05 00W0 00W05 00W0 00W03 00W037 00W039 00W03 00W050 00W05 00W0 00W075 00W07 00W00 00W 00W0 00W W050 00W009 00W0 00W0 00W0 00W05 00W0 00W03 00W037 00W03 00W050 00W05 00W0 00W0 00W075 00W07 00W00 00W 00W 3 3/3 / 5/3 3/ 9/3 5/ 5/ 7/ / 9/ / 3/ / 3/3 / 9/ 3/ 9/3 5/ 7/ / 9/ / / 3/ THEAD SIZE A H PAT NUMBE THEAD LENGTH PAT NUMBE THEAD LENGTH PAT NUMBE THEAD LENGTH 00W5 00W037 0W50 / 00W37 00W50 00W 00W75 00W05 00W05 00W03 00W009 00W0 00W05 00W0 00W05 00W03 00W037 00W03 00W050 00W05 00W0 00W0 00W075 00W07 00W00 00W 00W5 00W50 00W 00W75 00W7 00W00 000W05 000W W W00 00W0 00W0 00W05 00W0 00W / 5/3 5/ 3/3 / 5/3 3/ 5/ 7/ / 9/ / / / 7/ / 3/ 9/3 5/ Nominal Screw Size Nominal Screw Length Up to / in., incl Over / in., incl Over to in., incl Over in. 00W03 00W050 00W0 00W075 00W07 00W00 00W 00W5 00W37 00W50 00W75 00W7 00W00 00W0 00W0 00W05 00W03 00W037 00W050 00W0 00W075 00W00 00W5 00W50 0W0 0W0 0W05 0W03 0W037 0W03 0W050 0W0 0W075 0W0 0W07 0W00 0W0 0W thru 00 Tolerance on Length / / / / 7/ / 3/ 5/ / / / 3/ 5/ 7/ / 3/ / 0 thru thru W75 0W00 TELEPHONE: (70) 53- / 53- micro plastics, inc. AX: (70) 53-7

25 PEVIOUS PAGE O CON TEN TS IN DEX A-Z SCEWS, BOLTS, AND THEADED OD II PHILLIPS BINDE HEADSTYLE PAT NUMBE THEAD LENGTH 003WB050 3 / 00WB009 00WB0 00WB0 00WB0 00WB05 00WB0 00WB03 00WB037 00WB03 00WB050 00WB05 00WB0 00WB0 00WB075 00WB07 00WB00 00WB 00WB 00WB5 00WB37 00WB50 00WB 00WB75 00WB05 00WB05 00WB0 00WB0 00WB05 00WB0 00WB03 00WB037 00WB03 00WB050 00WB0 00WB075 00WB07 00WB00 00WB 3/3 / 9/ 3/ 9/3 5/ 7/ / 9/ / / 3/ / 5/3 / 3/ 9/3 5/ 7/ / / THEAD SIZE A H PAT NUMBE THEAD LENGTH PAT NUMBE THEAD LENGTH 00WB5 050WB WB37 00WB50 00WB75 00WB7 00WB00 00WB0 00WB0 00WB05 00WB03 00WB037 00WB050 00WB0 00WB075 00WB00 00WB5 00WB50 0WB0 0WB0 0WB05 0WB03 0WB037 0WB03 0WB050 0WB0 0WB075 0WB0 0WB07 0WB00 0WB0 0WB5 0WB50 0WB75 0WB00 050WB05 050WB03 050WB WB WB / 7/ / 3/ 5/ / / / 3/ 5/ 7/ / 3/ / / 5/ / Nominal Screw Size Nominal Screw Length Up to / in., incl Over / TO in., incl Over to in., incl Over in. 050WB07 050WB00 050WB5 050WB50 050WB75 050WB00 050WB50 05WB0 05WB037 05WB0 05WB075 05WB thru 00 Tolerance on Length / / 3/ 0 thru thru mpsales@microplastics.com micro plastics, inc. WEBSITE: 5

26 PEVIOUS PAGE O CON TEN TS IN DEX A-Z SCEWS, BOLTS, AND THEADED OD II PHILLIPS OUND HEADSTYLE PAT NUMBE THEAD LENGTH 00W009 3/3 00W0 00W05 00W0 00W05 00W03 00W037 00W03 00W050 00W05 00W0 / 5/3 3/ 5/ 7/ / 9/ THEAD SIZE A H Nominal Screw Size Nominal Screw Length Up to / in., incl Over / to in., incl Over to in., incl Over in. Tolerance on Length PAT NUMBE THEAD LENGTH PAT NUMBE THEAD LENGTH PAT NUMBE THEAD LENGTH 00W0 00W075 00W07 00W00 00W 00W5 00W50 00W 00W75 00W7 00W00 / / / 7/ 00W5 000W05 000W W W00 00W0 00W0 00W0 00W03 00W037 00W / 3/ 5/ / 00W0 00W075 00W00 00W5 00W50 0W0 0W0 0W05 0W03 0W037 0W / / 3/ 5/ 7/ 0000 thru thru thru ITEM NUMBE - 0ASO750MSN M achine Screw and Nut Assortment ITEM NUMBE - 0ASO305MCS M etal Core Screw Assortment TELEPHONE: (70) 53- / 53- micro plastics, inc. AX: (70) 53-7

27 PEVIOUS PAGE O CON TEN TS IN DEX A-Z SCEWS, BOLTS, AND THEADED OD II HEX SOCKET CAP PAT NUMBE THEAD LENGTH / /3 / 9/ 3/ 9/3 5/ 7/ / 9/ / / / 3/3 / 5/3 3/ 5/ 7/ / / / / THEAD Key Engagement SIZE A H J Min. 0 5/ / Nominal Screw Size Nominal Screw Length, in Up to.00, incl Over.00 to.50, incl Over.50 to.00, incl Over.00 0 thru incl / thru incl Tolerance on Length PAT NUMBE THEAD LENGTH PAT NUMBE THEAD LENGTH PAT NUMBE THEAD LENGTH / /- 3 * / / / 3/3 7/ 9/ 5/3 3/ 5/ / / 3/ 9/3 5/ 7/ / / / / 3/ 5/ / / / 3/ 5/ T /- 5/- 5/- 5/- 5/- 5/- 5/ / / / 3/ 5/ / / / / 3/ / / / * * * * * * thru / incl Over / /-3 /-3 /-3 /-3 /-3 /-3 /-3 / * / * * / * 3 * / * / * * / * 3 * / / / 3 *NOT ULL THEAD mpsales@microplastics.com micro plastics, inc. WEBSITE: 7

28 PEVIOUS PAGE O CON TEN TS IN DEX A-Z SCEWS, BOLTS, AND THEADED OD II THEAD SIZE A H J T ECONOMY GADE THUMB SCEWS PAT NUMBE THEAD LENGTH TEG 3/3 0900TEG 0900TEG 0900TEG 09005TEG 0900TEG 09003TEG TEG 09003TEG TEG 09005TEG 0900TEG 0900TEG TEG 09007TEG 09000TEG 090TEG 090TEG 0905TEG 09037TEG 09050TEG 09075TEG 09005TEG TEG 0900TEG 09005TEG 0900TEG 09005TEG 09003TEG TEG 09003TEG TEG 09005TEG 0900TEG 0900TEG TEG 09007TEG 09000TEG 090TEG / 9/ 3/ 9/3 5/ 7/ / 9/ / / 3/ / 3/3 / 5/3 3/ 5/ 7/ / 9/ / / PAT NUMBE THEAD LENGTH PAT NUMBE THEAD LENGTH PAT NUMBE THEAD LENGTH 0905TEG 09050TEG 0 / TEG TEG 090TEG 09075TEG 0907TEG 0905TEG TEG TEG TEG TEG 0900TEG 0900TEG 09005TEG 0900TEG 09003TEG TEG 09003TEG TEG 0900TEG TEG 09007TEG 09000TEG 090TEG 0905TEG 09037TEG 09050TEG 09075TEG 0907TEG 09000TEG 0900TEG 0900TEG 09005TEG 09003TEG TEG TEG 0900TEG TEG 09000TEG 0905TEG / 7/ / 3/ 9/3 5/ 7/ / / / 7/ / 3/ 5/ / Nominal Screw Length Up to including Over to including Over 090TEG 090TEG 0905TEG 0903TEG 09037TEG 0903TEG 09050TEG 090TEG 09075TEG 090TEG 0907TEG 0900TEG 090TEG 095TEG 0950TEG 0975TEG 0900TEG Tolerance on Length / 3/ 5/ 7/ / 3/ / / +/ /-0.0 +/ TEG TEG TEG 09500TEG TEG TEG TEG 09505TEG TEG TEG TEG TEG 0950TEG 09505TEG TEG TEG TEG 09500TEG / / / / 3/ / TELEPHONE: (70) 53- / 53- micro plastics, inc. AX: (70) 53-7

29 PEVIOUS PAGE O CON TEN TS IN DEX A-Z SCEWS, BOLTS, AND THEADED OD II KNULED HEAD THUMB SCEWS PAT NUMBE THEAD LENGTH 0900T 09005T T T T 09005T T T T 09000T 0900T T T T 09000T T T 09000T 0905T 09000T 09037T 09050T 09075T 0900T 090T 0950T 0900T T T T 09505T T T 09300T 09350T 09300T T T T T T T T T 3/ / / 3/ / 0 / (,57) (,35) (9,53) (,70) (9,05) (,35) (9,53) (,70) (9,05) (5,0) (,7) (9,53) (,70) (9,05) (5,0) (,70) 0 (9,05) 0 (5,0) 0 (3,75) 0 / (50,0) (9,53) (,70) (9,05) (5,0) /(,99) /(3,0) -0 / -0-0 (50,0) (,70) (9,05) (5,0) -0 (3,75) -0 /(3,0) 5/- / 5/- (,70) (5,0) 5/- /(3,0) 5/- - / - (50,0) (,70) (5,0) - /(3,0) - /-3 / /-3 (50,0) (,70) (5,0) /-3 /(3,0) /-3 (50,0) THEAD SIZE A * B * C (7,).30 (9,).5 (0,0).5 (0,0).50 (3,7) 5/.5 (5,) /.7 (7,5).750 (9,05) Nominal Screw Length Up to including Over to including Over.0 (7,).75 (,99).305 (7,75).35 (,).35 (9,7).35 (9,7).30 (0,9). (,9) * +/-.00 on A and B Dimensions Tolerance on Length +/ /-0.0 +/ (3,7).5 (3,).0 (3.5).0 (3,5).55 (3,9).7 (,3).7 (,75).03 (5,) OVAL HEAD THUMB SCEWS PAT NUMBE THEAD LENGTH V V 09500V V V V V V THEAD SIZE /3 / / / HD WIDTH HD HEIGHT HD THICKNESS mpsales@microplastics.com micro plastics, inc. WEBSITE: 9

30 PEVIOUS PAGE O CON TEN TS IN DEX A-Z SCEWS, BOLTS, AND THEADED OD II HEX CAP SCEWS PAT NUMBE THEAD LENGTH /- 5/- 5/- 5/- 5/- / / / 3 3 / / 5 5 / / THEAD SIZE A W H 5/ / to 7/ to / 9/ to 7/ to / to / over -/ PAT NUMBE THEAD LENGTH PAT NUMBE THEAD LENGTH PAT NUMBE THEAD LENGTH /- / / T /- 5/- 5/- 5/- 5/- 5/- 5/- 5/- 5/- 5/ / 3 3 / / 5 5 / / / / / 3 3 / Nominal Length Up to in., incl. Over in. to -. in., incl. Over -/ in. to in., incl. Over in. to in., incl. Longer than in /-3 /-3 /-3 /-3 /-3 /-3 /-3 /-3 /-3 /-3 /-3 /-3 /-3 /-3 / / 5 5 / / / / / 3 3 / / 5 5 / T T / T 7/-9 T = ull Threaded / / / 3 3 / / 5 5 / 5 / / "SPECIAL ITEM" SLOTTED HEX WASHE CAP ALL PATS UP TO LONG AE ULLY THEADED ITEM NUMBE DESCIPTION Slotted Hex Washer Cap 00-0 Slotted Hex Washer Cap 30 TELEPHONE: (70) 53- / 53- micro plastics, inc. AX: (70) 53-7

31 PEVIOUS PAGE O CON TEN TS IN DEX A-Z SCEWS, BOLTS, AND THEADED OD II SLOTTED HEX CAP SCEWS PAT NUMBE THEAD LENGTH /- 5/- 5/- 5/- 5/- / / / 3 3 / / 5 5 / / THEAD SIZE A W H J T 5/ / PAT NUMBE THEAD LENGTH PAT NUMBE THEAD LENGTH PAT NUMBE THEAD LENGTH /- / / /- 5/- 5/- 5/- 5/- 5/- 5/- 5/- 5/- 5/ / 3 3 / / 5 5 / / / / / 3 3 / Nominal Length Up to in., incl. Over in. to -. in., incl. Over -/ in. to in., incl. Over in. to in., incl. Longer than in to 7/ to / 9/ to 7/ to / to / /-3 /-3 /-3 /-3 /-3 /-3 /-3 /-3 /-3 /-3 /-3 /-3 /-3 /-3 / / / / / / 3 3 / / 5 5 / / T T = ULL THEAD over -/ / / 3 3 / / 5 5 / SLOTTED HEX WASHE CAP ALL PATS UP TO LONG AE ULLY THEADED PAT NUMBE THEAD LENGTH 3W W W W3755 3W W W W / / / 3 A B H U J T W mpsales@microplastics.com micro plastics, inc. WEBSITE: 3

32 PEVIOUS PAGE O CON TEN TS IN DEX A-Z SCEWS, BOLTS, AND THEADED OD II THEAD SIZE T A J GUB SLOTTED HEADSTYLE 0 / PAT NUMBE THEAD LENGTH 00G009 00G0 00G05 00G0 00G05 00G03 00G037 00G03 00G050 00G05 00G0 00G0 00G075 00G07 00G00 00G 00G5 00G50 00G 00G75 00G7 000G05 000G G G00 00G0 00G0 00G05 00G0 00G03 00G037 00G03 00G050 00G0 00G075 00G /3 / 5/3 3/ 5/ 7/ / 9/ / / / 7/ / 3/ 9/3 5/ 7/ / PAT NUMBE THEAD LENGTH PAT NUMBE THEAD LENGTH PAT NUMBE THEAD LENGTH 00G00 00G 00G5 00G37 00G50 00G75 00G7 00G00 00G0 00G0 00G05 00G03 00G037 00G050 00G0 00G075 00G00 00G5 00G50 0G0 0G0 0G05 0G03 0G037 0G03 0G050 0G0 0G075 0G0 0G07 0G00 0G0 0G5 0G50 0G75 0G / / 7/ / 3/ 5/ / / / 3/ 5/ 7/ / 3/ / / 050G05 050G03 050G G G0 050G G07 050G00 050G5 050G50 050G75 050G / / / 050G50 05G0 05G05 05G037 05G0 05G075 05G G G G G /-3 /-3 /-3 - / 3/ / 3 TELEPHONE: (70) 53- / 53- micro plastics, inc. AX: (70) 53-7

33 PEVIOUS PAGE O CON TEN TS IN DEX A-Z SCEWS, BOLTS, AND THEADED OD II THEAD * E. ONLY SIZE A * H J T 00 LAT HEADSTYLE PAT NUMBE THEAD LENGTH 00B0 / 00B0 3/ 00B03 5/ 00B050 / 00B0 00B0 3/ 00B05 00B03 5/ PAT NUMBE THEAD LENGTH PAT NUMBE THEAD LENGTH PAT NUMBE THEAD LENGTH 00B037 00B050 / 0B050 / 00B050 / 00B0 0B0 / 00B /3 00B00 050B B0 00B / 050B B00 00B B07-0 7/ 00B0 3/ 00B053 7/3 050B B05 00B00 050B0-0 -/ 00B037 00B0 0 3/ 050B -0 -/ LICENSE PLATE ASTENES STANDAD.050 ITEM NUMBE ITEM NUMBE ITEM NUMBE 050LP0 0500LPN 0500LPNS STANDAD BOLT STANDAD NUT SPEC. STANDAD NUT Part Number 0SGN000LPS is a set of deluxe license plate fasteners packaged in a clear poly bag. Set includes two each of part number 0SGN000 (grommet) and 0W0ZP (zinc plated screw). DELUXE ITEM NUMBE ITEM NUMBE ITEM NUMBE 0W0ZP M ETAL SCEW 0-3 X " PHIL PAN 0SGN000 GOM M ET 0SGN000LPS OU PIECE SET mpsales@microplastics.com micro plastics, inc. WEBSITE: 33

34 PEVIOUS PAGE O CON TEN TS IN DEX A-Z SCEWS, BOLTS, AND THEADED OD II THEAD SIZE A H *ef. Only J T LAT HEADSTYLE PAT NUMBE THEAD LENGTH 00A0 3/ 00A05 00A03 00A037 00A03 00A050 00A05 00A075 00A0 00A05 00A0 00A05 00A03 00A037 00A050 00A05 00A0 00A075 00A00 00A 00A 00A5 00A37 00A50 00A75 00A05 00A05 5/ 7/ / 9/ / 5/3 3/ 5/ / 9/ / 3/ / 5/3 0 5/ PAT NUMBE THEAD LENGTH PAT NUMBE THEAD LENGTH 00A0 3/ 0A050 / 00A05 00A03 00A037 00A050 00A0 00A075 00A00 00A 00A5 00A0 00A05 00A03 00A037 00A03 00A050 00A05 00A0 00A075 00A00 00A5 00A050 00A075 00A00 0A05 0A03 0A / / / / 5/ 7/ / 9/ / 5/ 0A075 0A07 0A00 0A5 0A50 050A05 050A A0 050A A07 050A00 050A5 050A50 050A75 050A00 050A50 03A A /- - / / / / SPECIAL ITEM LAT ITEM NUMBE TELEPHONE: (70) 53- / 53- micro plastics, inc. AX: (70) 53-7

35 PEVIOUS PAGE O CON TEN TS IN DEX A-Z SCEWS, BOLTS, AND THEADED OD 0 II OVAL HEADSTYLE PAT NUMBE THEAD LENGTH 330A0 3/ 330A05 330A03 330A A03 330A A05 330A A0 330A05 330A0 330A05 330A03 330A A A05 330A0 330A A00 330A 330A 330A5 330A37 330A50 330A75 330A05 330A05 5/ 7/ / 9/ / 5/3 3/ 5/ / 9/ / 3/ / 5/3 THEAD * E. ONLY SIZE A * H O J T PAT NUMBE THEAD LENGTH PAT NUMBE THEAD LENGTH PAT NUMBE THEAD LENGTH 330A05 330A03 330A A A0 330A A00 330A 330A5 330A75 330A0 330A05 330A03 330A A03 330A A05 330A0 330A A00 330A5 330A A A00 330A5 33A05 33A / / / / 5/ 7/ / 9/ / 5/ 33A037 33A050 33A075 33A07 33A00 33A5 33A A A / / / 3350A0 3350A A A A5 3350A A A A / / mpsales@microplastics.com micro plastics, inc. WEBSITE: 35

36 PEVIOUS PAGE O CON TEN TS IN DEX A-Z SCEWS, BOLTS, AND THEADED OD II This versatile threaded rod stock is easily cut to size, resistant to most chemicals,electrically insulating, non-magnetic,lightweight,low thermal conductivity, vibration and abrasion resistant. Stock length is feet. Longer lengths up to feet available on special order. We can furnish cut to your length with a nominal cutting charge. Other plastic materials can be furnished on special order. equest quote. THEADED ODS ITEM NUMBE 300T 300T 300T 300T 30T 3500T 33T 3375T 35003T 35T 37500T 37509T 3000T DESCIPTION 0-0 5/- - / /-9 - Threaded od Threaded od Threaded od Threaded od Threaded od Threaded od Threaded od Threaded od Threaded od Threaded od Threaded od Threaded od Threaded od THEADED STUDS Injection molded threaded studs with chamfer on both ends are available in several of the most popular sizes and lengths. Threaded studs are molded in natural Nylon / UL 9V. These studs are resistant to most chemicals, electrically insulating, non magnetic, lightweight, low thermal conductivity, vibration and abrasion resistant. ITEM NUMBE DESCIPTION LENGTH to -/ to / to 5 TOLEANCE +0/ /-.0 +0/ SD 3000SD 3050SD 3000SD 3050SD SD SD SD SD SD SD 3300SD 3350SD 3300SD 3350SD 33300SD SD SD SD SD SD SD SD SD SD SD SD SD /- 5/- 5/- 5/- 5/ /-3 /-3 /-3 /-3 /-3 /-3 / / / / 3 / / 3 / / 3 / / 3 5 Threaded Studs Threaded Studs Threaded Studs Threaded Studs Threaded Studs Threaded Studs Threaded Studs Threaded Studs Threaded Studs Threaded Studs Threaded Studs Threaded Studs Threaded Studs Threaded Studs Threaded Studs Threaded Studs Threaded Studs Threaded Studs Threaded Studs Threaded Studs Threaded Studs Threaded Studs Threaded Studs Threaded Studs Threaded Studs Threaded Studs Threaded Studs Threaded Studs 3 TELEPHONE: (70) 53- / 53- micro plastics, inc. AX: (70) 53-7

37 PEVIOUS PAGE O CON TEN TS IN DEX A-Z UNIVESAL NUTS STOCKED IN NYLON / UL 9V - CAN BE UNISHED IN: ACETAL ESIN CELANESE CELCON M70 UL 9 HB III NYLON SLOTTED THUMB NUTS ITEM * +/-.00 tolerance column B NUMBE DESCIPTION A ef. * B C E 0500SCN SLOTTED THUMB NUT.95 (7,9).37 (,05).039 (9,9).070 (,7) 0500SCN 0500SCN 0500SCN 050SCN 05500SCN SLOTTED THUMB NUT SLOTTED THUMB NUT 0 SLOTTED THUMB NUT SLOTTED THUMB NUT -0 SLOTTED THUMB NUT.33 (,).37 (9,0) 3/ (9,) 3/ (9,).370 (9,0).3 (,).3 (9,).00 (0,).00 (0,).7 (,).0 (,).09 (,5).05 (,3).05 (,3).070 (,7).05 (,30).059 (,50).0 (,73).0 (,73).0 (,) NYLON LOCK NUTS DESIGNED O STEEL SCEWS ITEM NUMBE DESCIPTION H 0700LN LOCK NUT.0 (,57).0 (3,5) 0700LN LOCK NUT.50 (,35).00 (5,0) 0700LN LOCK NUT.305 (7,75).00 (5,0) 0700LN LOCK NUT.335 (,5).30 (5,) 0700LN 0 LOCK NUT.35 (9,7).50 (,35) 070LN LOCK NUT.35 (9,7).50 (,35) 07500LN -0 LOCK NUT.5 (0,0).75 (,99) NYLON SEL - THEADING LOCK NUTS DESIGNED O STEEL SCEWS ITEM NUMBE DESCIPTION H 0700SLN SEL - THEAD.0 (,57).0 (3,5) 0700SLN SEL - THEAD.50 (,35).00 (5,0) 0700SLN SEL - THEAD.305 (7,75).00 (5,0) 0700SLN SEL - THEAD.335 (,5).30 (5,) 0700SLN 0 SEL - THEAD.35 (9,7).50 (,35) 070SLN SEL - THEAD.35 (9,7).50 (,35) 07500SLN -0 SEL - THEAD.5 (0,0).75 (,99) ALL TOLEANCES AE +/ mpsales@microplastics.com micro plastics, inc. WEBSITE: 37

38 PEVIOUS PAGE O CON TEN TS UNIVESAL NUTS IN DEX A-Z III STOCKED IN NYLON / UL 9V - CAN BE UNISHED IN: ACETAL ESIN CELANESE CELCON M70 UL 9 HB NYLON HEX NUTS ITEM NUMBE DESCIPTION H 000HN HEX NUT.0 (,57).070 (,7) 0003HN 3 HEX NUT.0 (,57).070 (,7) 000HN HEX NUT.50 (,35).00 (,5) 000HN HEX NUT.305 (7,75).0 (3,05) 0000HN 0 HEX NUT.305 (7,75).0 (3,05) 000HN HEX NUT 335 (,5).30 (3,30) 000HN 0 HEX NUT.35 (9,7).35 (3,3) 00HN HEX NUT.35 (9,7).35 (3,3) 00HN HEX NUT.5 (0,0).07 (5,) 0500HN -0 HEX NUT.33 (,00).33 (5,9) 050HN - HEX NUT.33 (,00).35 (5,97) 03HN 5/- HEX NUT.500 (,70).70 (,) 03HN 5/- HEX NUT.500 (,70).70 (,) 0375HN - HEX NUT.50 (,).330 (,3) 0375HN - HEX NUT.50 (,).330 (,3) 03753HN -3 HEX NUT.50 (,).330 (,3) 037HN 7/- HEX NUT.5 (7,0).30 (9,5) 0370HN 7/-0 HEX NUT.5 (7,0).30 (9,5) 05003HN /-3 HEX NUT.750 (9,05).30 (0,9) 05000HN /-0 HEX NUT.750 (9,05).30 (0,9) 05HN - HEX NUT.95 (3,0).550 (3,97) 05HN - HEX NUT.95 (3,50).550 (3,97) 077HN /-7 HEX NUT.00 (5,0).50 (,35) 07500HN -0 HEX NUT.0 (7,9).0 (,) 07509HN 7/-9 HEX NUT. (3,5).750 (9,05) 0000HN - HEX NUT.7 (37,3).70 (,0) NYLON SPECIAL HEX NUTS ITEM NUMBE DESCIPTION H 000HNS SPECIAL HEX NUT.0 (,57).090 (,9) 000HNS SPECIAL HEX NUT.50 (,35). (3,5) 000HNS SPECIAL HEX NUT.305 (7,75). (3,7) 000HNS SPECIAL HEX NUT.30 (,).70 (,3) 000HNS 0 SPECIAL HEX NUT.35 (9,7).9 (,9) 00HNS SPECIAL HEX NUT.35 (9,37).9 (,9) 0500HNS -0 SPECIAL HEX NUT.5 (0,0).5 (,55) ALL TOLEANCES AE +/ TELEPHONE: (70) 53- / 53- micro plastics, inc. AX: (70) 53-7

39 PEVIOUS PAGE O CON TEN TS UNIVESAL NUTS IN DEX A-Z STOCKED IN NYLON / UL 9V - CAN BE UNISHED IN: ACETAL ESIN CELANESE CELCON M70 UL 9 HB NYLON HEX JAM NUTS III ITEM NUMBE DESCIPTION H 03HJN 03HJN 0375HJN 0375HJN 03753HJN 0375HHJN 037HJN 0370HJN 0HJN 05003HJN 0500HJN 0500HJN 05HJN 05HJN 05HJN 07500HJN 0750HJN 07507HJN 075HJN 0000HJN 057PJN 050PJN 0375PJN 0500PJN 0750PJN 0750SJN 050SJN 0375SJN 0500SJN 0750SJN 5/- HEX JAM NUT 5/- HEX JAM NUT - HEX JAM NUT - HEX JAM NUT -3 HEX JAM NUT - HEX JAM NUT SPEC. 7/- HEX JAM NUT 7/-0 HEX JAM NUT 5/3-3 HEX JAM NUT /-3 HEX JAM NUT /- HEX JAM NUT /- HEX JAM NUT 9/- HEX JAM NUT - HEX JAM NUT - HEX JAM NUT -0 HEX JAM NUT - HEX JAM NUT -7 HEX JAM NUT 7/- HEX JAM NUT - HEX JAM NUT /-7 HEX JAM NUT - HEX JAM NUT NPT - HEX JAM NUT NPT /- HEX JAM NUT NPT - HEX JAM NUT NPT - HEX JAM NUT NPS - HEX JAM NUT NPS - HEX JAM NUT NPS /- HEX JAM NUT NPS - HEX JAM NUT NPS.500 (,70).500 (,70).500 (,70).500 (,70).500 (,70).70 (7,0).7 (7,5).7 (7,5).5 (5,).7 (7,5).7 (7,5).0 (,7).750 (9,05).930 (3,).937 (3,0). (,50). (,50).00 (5,0).5 (3,75). (37,59).5 (,).70 (,0).00 (5,0).5 (3,75). (37,59. (37,59).7 (7,5.00 (5,0).5 (3,75). (37,59) TOLEANCES AE +/-.00 ON and H DINSIONS.90 (,3).90 (,3).5 (3,).5 (3,).5 (3,) 7/3 (5,5).375 (9,53).50 (,35).5 (3,).0 (5,59).0 (5,59).5 (3,).50 (,35).375 (9,53).375 (9,53).50 (,35).50 (,35).5 (3,).30 (,).0 (0,). (,79).7 (,75).0 (7,).30 (,).0 (0,).0 (0,).5 (5,7).0 (7,).30 (,).0 (0,) NYLON LOCKING CAP NUTS Similar to our standard cap nut, except with a molded-in locking thread. Use for applications which require higher torque, vibration resistance or a more secure assembly. ITEM NUMBE DESCIPTION H * E. 0500LCN LOCKING CAP NUT.50 (,35).0 (7,) 0500LCN LOCKING CAP NUT.305 (7,75).35 (,7) 0500LCN LOCKING CAP NUT.330 (,3).375 (9,53) 0500LCN 0 LOCKING CAP NUT.35 (9,7).00 (0,) 050LCN LOCKING CAP NUT.35 (9,7).00 (0,) 05500LCN 053LCN -0 LOCKING CAP NUT 5/- LOCKING CAP NUT.5 (0,0).500 (,70).75 (,07).530 (3,) TOLEANCES AE +/-.00 ON and H DINSIONS mpsales@microplastics.com micro plastics, inc. WEBSITE: 39

40 PEVIOUS PAGE O CON TEN TS UNIVESAL NUTS IN DEX A-Z III STOCKED IN NYLON / UL 9V - CAN BE UNISHED IN: ACETAL ESIN CELANESE CELCON M70 UL 9 HB NYLON CAP NUTS AND H TOLEANCES +/-.00 ITEM NUMBE DESCIPTION H * E. 0500CN CAP NUT.50 (,35).0 (7,) 0500CN CAP NUT.305 (7,75).35 (,7) 0500CN CAP NUT.330 (,3).375 (9,53) 0500CN 0 CAP NUT.35 (9,7).00 (0,) 050CN CAP NUT.35 (9,7).00 (0,) 05500CN -0 CAP NUT.5 (0,0).75 (,07) 0550CN - CAP NUT.5 (0,0).75 (,07) 053CN 5/- CAP NUT.500 (,70).530 (3,) 053CN 5/- CAP NUT.500 (,70).530 (3,) 05375CN - CAP NUT.50 (,).0 (5,75) 05375CN - CAP NUT.50 (,).0 (5,75) CN /-3 CAP NUT.750 (9,05).0 (0,57) 055CN - CAP NUT.935 (3,75).970 (,) NYLON KNULED THUMB NUTS A AND B TOLEANCES +/-.00 ITEM NUMBE DESCIPTION A B C 000TN THUMB NUT.300 (7,).0 (7,).5 (3,) 000TN THUMB NUT.30 (9,).75 (,99).5 (3,) 000TN THUMB NUT.5 (0,0).305 (7,75).0 (3,5) 000TN 0 THUMB NUT.5 (0,0).35 (,).0 (3,5) 00TN THUMB NUT.5 (0,0).35 (,).0 (3,5) 0500TN -0 THUMB NUT.50 (3,7).35 (9,7).55 (3,9) 03TN 5/- THUMB NUT. (5,5).00 (0,).70 (,33) NYLON KNULED THUMB NUTS A ITEM NUMBE DESCIPTION A B C 000TNA 000TNA 000TNA 000TNA 00TNA 0500TNA 03TNA 0375TNA 05003TNA THUMB NUT A THUMB NUT A THUMB NUT A 0 THUMB NUT A THUMB NUT A -0 THUMB NUT A 5/- THUMB NUT A - THUMB NUT A /-3 THUMB NUT A.300 (7,).30 (9,).5 (0,0).5 (0,0).5 (0,0).50 (3,7).5 (5,).7 (7,5).750 (9,05).0 (7,).75 (,99).305 (7,75).35 (,).35 (,).35 (9,7).35 (9,7).30 (0,9). (,9).0 (3,05).5 (3,).0 (3,5).0 (3,5).0 (3,5).55 (3,9).7 (,3).7 (,75).03 (5,) 0 TELEPHONE: (70) 53- / 53- micro plastics, inc. AX: (70) 53-7

41 PEVIOUS PAGE O CON TEN TS IN DEX A-Z UNIVESAL NUTS STOCKED IN NYLON / UL 9V - CAN BE UNISHED IN: ACETAL ESIN CELANESE CELCON M70 UL 9 HB III NYLON WING NUTS ITEM NUMBE DESCIPTION A B C D 000WN WING NUT.90 (,). (,9).3 (5,).0 (0,) 000WN WING NUT.90 (,). (,9).3 (5,).0 (0,) 000WN WING NUT.90 (,). (,9).3 (5,).0 (0,) 000WN 0 WING NUT.90 (,). (,9).3 (5,).0 (0,) 00WN WING NUT.90 (,). (,9).3 (5,).0 (0,) 000WNA 0 WING NUT-A.0 (7,9).3 (,00).30 (7,).5 (,) 00WNA WING NUT-A.0 (7,9).3 (,00).30 (7,).5 (,) 0500WNA -0 WING NUT-A.0 (7,9).3 (,00).30 (7,).5 (,) 050WNA - WING NUT-A.0 (7,9).3 (,00).30 (7,).5 (,) 0500WN -0 WING NUT.3 (3,5).7 (,03).3 (9,).5 (,5) 050WN - WING NUT.3 (3,5).7 (,03).3 (9,).5 (,5) 03WN 5/- WING NUT.3 (35,05).7 (,9).3 (9,).5 (,5) 0375WN - WING NUT.3 (35,05).7 (,9).3 (9,).5 (,5) 0375WN - WING NUT.0 (35,5).7 (,9).3 (9,). (,) 037WN 7/- WING NUT.7 (,70).90 (,).5 (,).5 (,59) 05003WN /-3 WING NUT.7 (,70).90 (,).5 (,).5 (,59) 05WN 9/- WING NUT.7 (,70).90 (,).5 (,).5 (,59) NYLON DECO WING NUTS ITEM NUMBE DESCIPTION A B C D 000DECOWN DECO WING NUT " (5,) " (9,53) 5/" (7,9) 5/" (5,9) 000DECOWN DECO WING NUT " (5,) " (9,53) 5/" (7,9) 5/" (5,9) 000DECOWN DECO WING NUT " (5,) " (9,53) 5/" (7,9) 5/" (5,9) 000DECOWN 0 DECO WING NUT 7/" (,3) /" (,70) 7/" (,0) 5/" (7,93) 00DECOWN DECO WING NUT 7/" (,3) /" (,70) 7/" (,0) 5/" (7,93) 0500DECOWN -0 DECO WING NUT -/" (9,7) " (5,) 7/3" (3,9) " (9,53) 0375DECOWN - DECO WING NUT -9/" (39,7) 3/" (5,0) 9/" (,5) /3" (,) NYLON LOCKI NG DECO WING NUTS Similar to our standard wing nut, except with a molded-in locking thread. Use for applications which require higher torque, vibration resistance or a more secure assembly. ITEM NUMBE DESCIPTION A B C D 000DLWN 000DLWN 000DLWN 000DLWN 00DLWN 0500DLWN *03DLWN *Part is flush across wings LOCKING DECO WING NUT LOCKING DECO WING NUT LOCKING DECO WING NUT 0 LOCKING DECO WING NUT LOCKING DECO WING NUT -0 LOCKING DECO WING NUT 5/- LOCKING DECO WING NUT " (5,) " (5,) " (5,) 7/" (,3) 7/" (,3) -/" (9,7) -9/ (39,9) " (9,53) " (9,53) " (9,53) /" (,70) /" (,70) " (5,) 3/ (5,00) 5/" (7,9) 5/" (7,9) 5/" (7,9) 7/" (,0) 7/" (,0) 7/3" (3,9) 9/ (,5) 5/" (5,9) 5/" (5,9) 5/" (5,9) 5/" (7,93) 5/" (7,93) " (9,53) 39/ (5,) mpsales@microplastics.com micro plastics, inc. WEBSITE:

42 PEVIOUS PAGE O CON TEN TS IN DEX A-Z WASHES, SHOULDE WASHES AND SCEW INSULATOS IV Similar to our standard flat washers, but with a specially configured I.D. designed to grip the outside of the screw shank. The washer slides on the screw easily, but is retained on the screw. or use in applications requiring pre-assembly of the screw and washer, to reduce final assembly cost. Other sizes will be tooled on request. NYLON ETAINING WASHES ITEM NUMBE DESCIPTION A B D T WT0003 WT000 WT0003 WT000 WT005 WT0003 WT000 WT0003 WT000 WT0003 WT000 WT5003 WT500 WT303 WT30 WT37503 WT3750 WT3703 WT370 WT50003 WT5000 WT -03 WT -0 WT -03 WT -0 WT -5 WT -03 WT -0 WT -03 WT -0 WT 0-03 WT 0-0 WT WT 50-0 WT 3-03 WT 3-0 WT WT WT WT 37-0 WT WT / (5,) 3/ (5,) 7/ (,75) 7/ (,75) 7/ (,75) / (,33) / (,33) 5/ (9,9) 5/ (9,9) 9/ (,5) 9/ (,5) 9/3 (5,0) 9/3 (5,0) 7/ (,5) 7/ (,5) 57/ (,) 57/ (,) -/3 (,9) -/3 (,9) -/ (,5) -/ (,5).5 (,9).5 (,9).5 (3,9).5 (3,9).5 (3,9).9 (5,03).9 (5,03).35 (5,97).35 (5,97).77 (7,0).77 (7,0).375 (9,53).375 (9,53).70 (,9).70 (,9).5 (,33).5 (,33).570 (,).570 (,).90 (7,53).90 (7,53).07 (,9).07 (,9).0 (,59).0 (,59).0 (,59). (3,5). (3,5).5 (3,).5 (3,).77 (,50).77 (,50).3 (5,9).3 (5,9).9 (7,).9 (7,).350 (,9).350 (,9).0 (0,).0 (0,). (,9). (,9).03 (0,79).0 (,5).03 (0,79).0 (,5).5 (3,).03 (0,79).0 (,5).03 (0,79).0 (,5).03 (0,79).0 (,5).03 (0,79).0 (,5).03 (0,79).0 (,5).03 (0,79).0 (,5).03 (0,79).0 (,5).03 (0,79).0 (,5) Available in natural or black nylon, these molded washers protect cabinets from scratching, cover misaligned holes, etc. May also be used as glides, bumpers, feet, and spacers. NYLON INISHING WASHES ITEM NUMBE DESCIPTION A B C SW000 SW000 SW000 SW00 SW005 SW SW SW 0 SW SW 5.37 (,0).50 (,95).575 (,).09 (5,7).3 (7,35).3 (3,3).7 (,3).9 (,9).5 (5,75).0 (,).00 (,5).5 (,9).5 (3,).0 (,0).0 (,57) TELEPHONE: (70) 53- / 53- micro plastics, inc. AX: (70) 53-7

43 PEVIOUS PAGE O CON TEN TS IN DEX A-Z WASHES, SHOULDE WASHES AND SCEW INSULATOS IV We will also tool custom flatwashers for a nominal engineering charge. Size range up to 3" O.D. Minimum thickness /3" NYLON STANDAD LAT WASHES ITEM NUMBE DESCIPTION A B T W0003 W -03 (,35).090 (,9).03 (0,) W000 W -0 (,35).090 (,9).0 (,5) W00093 W -093 (,35).090 (,9).093 (,3) W005 W -5 (,35).090 (,9).5 (3,) W0003 W -03 (,35).5 (,9).03 (0,) W000 W -0 (,35).5 (,9).0 (,5) W00093 W -093 (,35).5 (,9).093 (,3) W005 W -5 (,35).5 (,9).5 (3,) W0003 W -03 5/ (7,9).0 (3,5).03 (0,) W000 W -0 5/ (7,9).0 (3,5).0 (,5) W00093 W / (7,9).0 (3,5).093 (,3) W005 W -5 5/ (7,9).0 (3,5).5 (3,) W0003 W -03 (9,53).7 (,3).03 (0,) W000 W -0 (9,53).7 (,3).0 (,5) W00093 W -093 (9,53).7 (,3).093 (.3) W005 W -5 (9,53).7 (,3).5 (3,) W0003 W 0-03 (9,53).9 (,93).03 (0,) W000 W 0-0 (9,53).9 (,93).0 (,5) W00093 W (9,53).9 (,93).093 (,3) W005 W 0-5 (9,53).9 (,93).5 (3,) W5003 W / (,70).57 (,53).03 (0,) W500 W 50-0 / (,70).57 (,53).0 (,5) W50093 W / (,70).57 (,53).093 (,3) W505 W 50-5 / (,70).57 (,53).5 (3,) W303 W 3-03 / (,70).37 (,05).03 (0,) W30 W 3-0 / (,70).37 (,05).0 (,5) W3093 W / (,70).37 (,05).093 (,3) W35 W 3-5 / (,70).37 (,05).5 (3,) W37503 W (5,).375 (9,53).03 (0,) W3750 W (5,).30 (9,5).0 (,5) W W (5,).30 (9,5).093 (,3) W3755 W (5,).30 (9,5).5 (3,) W3703 W (9,05).3 (,5).03 (0,) W370 W 37-0 (9,05).3 (,5).0 (,5) W37093 W (9,05).3 (,5).093 (,3) W375 W 37-5 (9,05).3 (,5).5 (3,) W50003 W (9,05).505 (,3).03 (0,) W5000 W (9,05).505 (,3).0 (,5) W W (9,05).505 (,3).093 (,3) W5005 W (9,05).505 (,3).5 (3,) mpsales@microplastics.com micro plastics, inc. WEBSITE: 3

44 PEVIOUS PAGE O CON TEN TS IN DEX A-Z WASHES, SHOULDE WASHES AND SCEW INSULATOS IV NYLON SPECIAL LAT WASHES ITEM NUMBE DESCIPTION A B T 7W0090 W (,9).03 (0,79).03 (0,79) 7W000 W (,5).035 (0,9).00 (0,5) 7W00 W 0.5 (3,).03 (0,).00 (,57) 7W00 W 0.0 (3,05).03 (,0).0 (,57) 7W003 W 03.0 (3,05).05 (,).30 (3,30) 7W005 W (3,9).03 (0,79).0 (,57) 7W03 W 3.3 (3,5).00 (,0).033 (0,) 7W050 W 50.5 (3,9).050 (,00).00 (5,0) 7W05 W 5.5 (3,9).07 (,93).0 (,57) 7W05 W 5.5 (,0).0 (,79).070 (,79) 7W070 W (,3).03 (0,97).00 (,5) 7W070 W 70. (,).0 (3,05).5 (3,7) 7W07 W 7.7 (,5).09 (,9).05 (,) 7W079 W (,55).05 (,5).07 (,9) 7W00 W 0.0 (,57).39 (3,53).0 (,3) 7W003 W 03. (,7).09 (,9).030 (,0) 7W00 W 0.7 (,75).0 (3,05).00 (,5) 7W005 W 05.7 (,75).0 (,).30 (3,30) 7W009 W 09.7 (,75). (3,5).5 (3,) 7W05 W 5. (,7).09 (,39).00 (0,5) 7W05 W 5.9 (,9).05 (,).03 (0,79) 7W070 W 70.7 (,75).0 (3,05).0 (,57) 7W07 W 7.5 (,70).05 (,30).3 (3,35) 7W075 W 75.7 (,75).30 (3,30).50 (3,) 7W0900 W (5,05).5 (,95).050 (,7) 7W090 W 90.0 (5,3). (,).053 (,35) 7W090 W (,3).0 (3,05).00 (,5) 7W0950 W (5,00).5 (,9).030 (0,7) 7W0970 W (5,00).00 (,5).5 (3,9) 7W099 W (5,05).5 (3,).05 (,) 7W0 W. (5,5).0 (3,05).037 (0,9) 7W090 W 90.0 (5,59).0 (,).03 (0,79) 7W09 W 9.9 (5,5).09 (,39).00 (,5) 7W05 W 5.5 (5,7).50 (3,).05 (,) 7W05 W 5.5 (5,7).5 (3,).00 (,5) 7W039 W 39.3 (5,9). (3,5).090 (,9) 7W0350 W (5,97).5 (3,).00 (,0) 7W00 W 0.0 (,0).3 (,7).00 (,0) 7W050 W 50.5 (,).95 (,95).5 (3,) 7W05 W 5.5 (,). (3,5).093 (,3) 7W00 W 0. (,5).7 (,3).00 (,5) 7W050 W (,35).0 (,07).0 (,57) 7W050 W (,35). (3,0).05 (0,) 7W0503 W (,35).090 (,9).055 (,0) 7W050 W (,35). (3,5).0 (,57) 7W0505 W (,0).0 (3,5).00 (,03) 7W050 W (,35).5 (3,).095 (,) 7W0507 W (,35).0 (3,5).09 (,39) 7W050 W (,35).5 (3,).0 (,57) TELEPHONE: (70) 53- / 53- micro plastics, inc. AX: (70) 53-7

45 PEVIOUS PAGE O CON TEN TS IN DEX A-Z WASHES, SHOULDE WASHES AND SCEW INSULATOS IV NYLON SPECIAL LAT WASHES ITEM NUMBE DESCIPTION A B T 7W0509 W (,35).7 (,3).00 (,5) 7W050 W (,35).7 (,75).30 (3,30) 7W05 W 5.50 (,35). (3,).0 (,79) 7W05 W 5.50 (,35).7 (3,73).5 (3,) 7W055 W (,35).0 (3,5).50 (3,) 7W0 W.5 (,3).5 (3,).035 (0,) 7W057 W (,35).5 ( 3,9).00 (,5) 7W05 W 5.50 (,35).5 (3,).50 (3,) 7W0 W. (,50).7 (,75).05 (,) 7W059 W (,5).0 (,0).0 (,57) 7W0595 W (7,9).35 (3,3).7 (3,3) 7W075 W (,99).0 (3,05).0 (,57) 7W075 W (,).07 (5,).05 (,7) 7W070 W 70.7 (7,0). (3,0).050 (,7) 7W07 W 7.0 (7,).0 (5,33).5 (3,) 7W0 W. (7,3).0 (3,05).00 (,0) 7W0 W.90 (7,3).5 (,9).07 (,9) 7W03 W 3.0 (7,).0 (3,05).030 (0,7) 7W0 W. (7,).0 (3,05).00 (0,5) 7W05 W 5. (7,).0 (3,05).00 (,0) 7W0 W. (7,).0 (3,05).00 (,5) 7W07 W 7.0 (7,).55 (3,9).0 (,0) 7W0 W. (7,).0 (3,5).00 (0,5) 7W05 W 5.5 (7,).30 (3,30).00 (,5) 7W05 W 5.5 (7,).0 (,0).03 (0,) 7W0 W. (7,).90 (,3).05 (,5) 7W095 W (7,9).0 (5,59).7 (3,3) 7W095 W (7,7).3 (3,50).030 (7,) 7W0953 W (7,7).90 (,3).03 (0,) 7W03 W 3.3 (7,9).7 (,75).050 (,7) 7W03 W 3.3 (7,9).095 (,).0 (,57) 7W033 W 33.3 (,0).30 (3,30).0 (,57) 7W03 W 3.3 (7,9).0 (,79).5 (3,) 7W035 W 35.3 (7,9).0 (,57).5 (3,) 7W03 W 3.3 (7,9).5 (,9).0 (3,5) 7W037 W 37.3 (7,9).0 (3,5).07 (,9) 7W03 W 3.30 (,3).5 (3,9).03 (0,79) 7W039 W 39.3 (7,9). (5,79).50 (,35) 7W0330 W (7,9). (,).0 (,57) 7W033 W 33.3 (7,9).50 (3,).00 (0,5) 7W033 W 33.3 (7,9).5 (3,).03 (0,) 7W0333 W (7,9).0 (,0).7 (3,3) 7W033 W 33.3 (7,9).50 (3,).030 (0,7) 7W0335 W (7,9).9 (,).0 (,79) 7W033 W (7,95).7 (5,5).5 (3,) 7W0337 W (7,9).50 (3,).00 (,0) 7W033 W 33.3 (7,9).50 (3,).050 (,7) 7W0339 W (7,9).50 (3,).00 (,5) 7W03 W 3.3 (7,9).0 (,79).0 (,57) mpsales@microplastics.com micro plastics, inc. WEBSITE: 5

46 PEVIOUS PAGE O CON TEN TS IN DEX A-Z WASHES, SHOULDE WASHES AND SCEW INSULATOS IV NYLON SPECIAL LAT WASHES ITEM NUMBE DESCIPTION A B T 7W03 W 3.3 (7,9).0 (,0).070 (0,7) 7W035 W 35.3 (7,9).03 (,0).090 (,9) 7W03 W 3.35 (,00).5 (3,).03 (0,79) 7W0350 W (,00).57 (3,9.97 (5,00) 7W03 W 3.3 (,). (3,5).0 (,57) 7W033 W (,3).9 (,0).00 (,03) 7W030 W (,3).50 (3,).00 (,5) 7W03 W (,5).0 (7,).95 (,95) 7W0335 W (,5).90 (,3).03 (0,) 7W03 W 3.3 (,0).90 (,3).5 (3,) 7W0350 W (,9).0 (,0).00 (,0) 7W03505 W (9,0).30 (3,30).0 (,57) 7W0350 W (9,0).79 (,55). (3,00) 7W0350 W (,9).0 (,0).0 (,57) 7W0350 W (,99).9 (,9).03 (0,79) 7W035 W (,97).97 (5,00).57 (3,99) 7W030 W (9,50).0 (5,59).0 (,57) 7W03750 W (9,53).50 (3,).030 (0,7) 7W0375 W (9,53).7 (,37).00 (,5) 7W0375 W (9,53).90 (,3).05 (,5) 7W03753 W (9,53).3 (3,33).093 (,3) 7W0375 W (9,53).50 (,35).093 (,3) 7W03755 W (9,53). (5,5).03 (0,) 7W0375 W (9,53).53 (,3).0 (,3) 7W03757 W (9,53). (3,5).03 (0,79) 7W0375 W (9,53).5 (3,).00 (,0) 7W03759 W (9,53).09 (,39). (7,) 7W0370 W (9,53). (,5).0 (,57) 7W037 W (9,53).0 (5,33).0 (,0) 7W037 W (9,53).70 (,3).00 (,0) 7W0373 W (9,53).70 (,3).050 (,7) 7W0375 W (9,53).0 (3,5).00 (,03) 7W037 W (9,53).53 (3,9).03 (,0) 7W0377 W (9,5). (5,).095 (,) 7W037 W (9,53).50 (,35).50 (,7) 7W0379 W (9,53).0 (5,33).5 (3,) 7W0377 W (9,53).5 (3,).07 (,3) 7W03773 W (5,0).375 (9,53).3 (7,9) 7W030 W (9,5).00 (5,0).030 (0,7) 7W030 W (9,5).7 (,75).55 (3,9) 7W030 W 30.3 (9,70).55 (,).95 (,95) 7W0390 W (9,9).00 (5,0).03 (0,79) 7W0390 W (9,).5 (,37).5 (3,7) 7W03903 W (9,9).3 (,33).079 (,0) 7W00 W 0.0 (0,3).3 (5,9).0 (,57) 7W00 W 0.0 (0,3).77 (,50).0 (,57) 7W050 W 50.5 (0,79).35 (5,97).30 (3,30) 7W0330 W (,05).09 (5,3).039 (0,99) 7W0350 W (,05).0 (5,3).7 (,75) 7W035 W (,05).50 (,35).09 (,39) 7W035 W (,05).9 (,9).0 (,7) 7W0353 W (,3). (5,5).5 (3,9) 7W037 W (,0).00 (5,0).0 (,57) TELEPHONE: (70) 53- / 53- micro plastics, inc. AX: (70) 53-7

47 PEVIOUS PAGE O CON TEN TS IN DEX A-Z WASHES, SHOULDE WASHES AND SCEW INSULATOS NYLON SPECIAL LAT WASHES ITEM NUMBE DESCIPTION A B T 7W037 W (,0).0 (,0).07 (,9) 7W0373 W (,0).95 (,95).03 (0,79) 7W037 W (,0).00 (5,0).5 (,9) 7W0375 W (,0).00 (5,0).090 (,9) 7W037 W (,0).95 (,95).00 (0,5) 7W0377 W (,0).95 (,95).00 (,0) 7W037 W (,0).95 (,95).050 (,7) 7W0379 W (,0).95 (,95).00 (,7) 7W030 W 30 7/ (,0) /3 (,7) / (0,) 7W03 W 3.3 (,3).5 (3,9).0 (,57) 7W00 W 0. (,).5 (3,9).03 (0,) 7W0 W.5 (,30).90 (7,37).033 (0,) 7W0 W. (,).7 (,75).093 (,3) 7W030 W 30.3 (,5).53 (,3).5 (3,) 7W050 W (,3).5 (5,7).0 (,) 7W05 W 5.53 (,5).375 (9,5).0 (,57) 7W050 W (,3).00 (5,0).0 (,) 7W050 W 50.5 (,).50 (,35).05 (0,3) 7W079 W 79.9 (,50).09 (5,3).00 (0,5) 7W070 W 70.7 (,99).5 (,0).059 (,50) 7W07 W (,3).375 (9,53).050 (,7) 7W075 W (,57).30 (7,7).095 (,) 7W0950 W (,5).0 (,0).5 (,) 7W05000 W (,70).5 (,9).075 (,9) 7W0500 W (,70).33 (,7).09 (,77) 7W0500 W (,70).35 (9,7).0 (,0) 7W05003 W (,5). (7,).030 (0,7) 7W0500 W (,70).37 (,05).03 (0,) 7W05005 W (,70).375 (9,53).07 (,) 7W0500 W (,70).3 (7,9).5 (3,9) 7W05007 W (,70).50 (,35).50 (3,) 7W0500 W (,70). (,7).03 (0,) 7W05009 W (,70).55 (,).075 (,9) 7W0500 W (,70).3 (7,9).5 (3,) 7W050 W (,70).5 (3,).5 (3,) 7W0503 W (,70).30 (,3).70 (,3) 7W0505 W (,70). (3,).5 (3,) 7W050 W (,70).9 (5,5).5 (3,90) 7W0507 W (,70). (,5).5 (3,) 7W0500 W (,70).30 (,3).00 (5,0) 7W0507 W 507 / (,70).30 (,3).50 (,35) 7W050 W (,70).30 (,3). (7,) 7W050 W (,95).93 (,90).050 (,7) 7W0530 W (3,).3 (,7).00 (,5) 7W055 W (3,).375 (9,53).093 (,3) 7W055 W 55.5 (3,).0 (0,).039 (0,99) 7W0553 W (3,3).75 (,07).070 (,7) 7W055 W (3,3).9 (,93).03 (0,) 7W0530 W (3,9).33 (7,95).03 (0,79) 7W0500 W (3,7).05 (0,9). (,) 7W055 W (3,9).33 (9,).0 (,57) 7W05 W 5.55 (,07). (,).030 (0,7) 7W0555 W (,0).55 (,).07 (,9) IV mpsales@microplastics.com micro plastics, inc. WEBSITE: 7

48 PEVIOUS PAGE O CON TEN TS IN DEX A-Z WASHES, SHOULDE WASHES AND SCEW INSULATOS IV NYLON SPECIAL LAT WASHES ITEM NUMBE DESCIPTION A B T 7W050 W (,).5 (,73).030 (0,7) 7W050 W (,).0 (,0).5 (3,) 7W0503 W (,).30 (,3).7 (,75) 7W0505 W (,).373 (9,7).03 (0,79) 7W050 W 50.5 (,7). (3,5).0 (,57) 7W05 W 5.5 (,7).50 (,35).03 (0,79) 7W05 W 5.5 (,7).0 (,0).0 (,57) 7W053 W 53.5 (,7).03 (5,).0 (,57) 7W05 W 5.5 (,7).30 (,3).00 (0,5) 7W059 W 59.5 (,7).3 (,33).095 (,) 7W0530 W (,35).37 (,05).095 (,) 7W053 W 53.5 (,3).53 (,3).093 (,3) 7W0550 W (,35).5 (,5).09 (,39) 7W05700 W (,).307 (7,0).5 (3,) 7W0590 W (5,9).39 (0,03).75 (,5) 7W059 W 59.5 (,7).30 (,3).5 (3,) 7W059 W (,99).3 (,33).7 (3,73) 7W050 W 50.5 (5,.0 (,0).00 (,5) 7W05 W 5.5 (5,).500 (,70).3 (3,35) 7W05 W 5.5 (5,).30 (,).5 (3,) 7W053 W 53.5 (5,).0 (0,3).0 (3,05) 7W00 W 0.0 (5,75).5 (,73).9 (,9) 7W003 W 03.0 (5,75).09 (5,3).7 (,75) 7W00 W 0.0 (5,75).350 (,9). (,7) 7W005 W 05.5 (5,).0 (0,).033 (,3) 7W00 W 0.5 (5,).0 (,0).0 (3,5) 7W0 W. (5,0).5 (,0).00 (,5) 7W0 W.5 (5,).50 (,35).90 (,3) 7W00 W 0.5 (5,).505 (,3).09 (,3) 7W050 W 50.5 (5,).5 (,9).50 (,35) 7W05* W 5.0 (5,7).30 (7,).039 (0,99) 7W05 W 5.5 (5,).9 (,93).5 (3,) 7W053 W 53.5 (5,).7 (,75).0 (,57) 7W05 W 5.5 (5,). (5,5).0 (,57) 7W055 W 55.5 (5,).50 (,35).0 (,57) 7W0 W.5 (5,).37 (,0).093 (,3) 7W057 W 57.5 (5,).5 (3,).0 (,57) 7W05 W 5.5 (5,). (5,5).5 (3,) 7W059 W 59.5 (5,). (5,5).500 (,70) 7W00 W 0.5 (5,). (5,5).50 (,35) 7W0 W.5 (5,).390 (9,9).5 (,73) 7W0 W.5 (5,).57 (,53).00 (0,5) 7W03 W 3.5 (5,). (7,).0 (,79) 7W0 W.5 (5,).35 (,00).03 (0,79) 7W05 W 5.5 (5,). (0,7).03 (5,) 7W0 W.5 (5,).35 (,00).5 (3,) 7W07 W 7.5 (5,). (5,5).03 (0,79) 7W0 W.5 (5,).37 (,0).50 (,35) 7W09 W 9 (5,7). (7,).0 (5,33) 7W070 W 70. (5,70).70 (,).0 (5,59) 7W07 W 7.30 (,00).37 (,3).075 (,9) 7W07 W 7.5 (5,).35 (9,7).5 (,70) 7W073 W 73.5 (5,).3 (7,9).50 (,35) * ID IS CHAED TELEPHONE (70) 53- / 53- micro plastics, inc. AX (70) 53-7

49 PEVIOUS PAGE O CON TEN TS IN DEX A-Z WASHES, SHOULDE WASHES AND SCEW INSULATOS NYLON SPECIAL LAT WASHES ITEM NUMBE DESCIPTION A B T 7W09 W 9.5 (5,).5 (,73).093 (,3) 7W030 W (,00).7 (,3).00 (,5) 7W0303 W (,0).3 (7,9).077 (,9) 7W030 W (,00).0 (7,).030 (0,7) 7W0500 W (,5). (,).5 (3,) 7W07 W 7.7 (7,0). (,).03 (0,79) 7W00 W 0. (7,3).70 (,3).0 (,57) 7W030 W 30.3 (7,35).337 (,5).03 (,0) 7W05 W 5.5 (7,0).0 (,0).03 (0,) 7W055 W 55.5 (7,0).95 (7,9).0 (,57) 7W05 W 5.95 (7,5).3 (9,5).059 (,50) 7W07 W 7.7 (7,5).33 (,7).03 (0,79) 7W0 W.7 (7,5).0 (,0).00 (0,5) 7W09 W 9.7 (7,5).0 (,0).050 (,7) 7W070 W 70.7 (7,5).3 (,79).0 (,3) 7W07 W 7.7 (7,5).0 (,0).00 (,5) 7W07 W 7.7 (7,5).0 (,0).00 (,0) 7W073 W 73.9 (7,5). (0,9).03 (0,79) 7W07 W 7.7 (7,5). (0,9).0 (,57) 7W075 W 75.9 (7,5).507 (,).0 (,07) 7W07 W 7.7 (7,5).5 (,3).0 (,57) 7W077 W 77.0 (7,7).390 (9,9).5 (3,) 7W07 W 7.7 (7,5).5 (3,9).35 (3,3) 7W079 W 79.7 (7,5).0 (7,).03 (0,79) 7W00 W 0.0 (7,7).3 (,0).7 (,75) 7W0 W. (7,).390 (9,9).03 (0,79) 7W0 W. (7,).3 (,0).90 (,3) 7W093 W (7,5).0 (,0). (,7) 7W0700 W (7,7).55 (,35).0 (,57) 7W0705 W (,).570 (,).00 (,5) 7W07090 W (,0).33 (,53).079 (,0) 7W0709 W (,0). (,7).0 (,79) 7W0709 W (7,70).53 (3,9).5 (,0) 7W07093 W (,03).9 (,5).5 (3,7) 7W070 W 70.7 (,0).5 (3,30).0 (,57) 7W0730 W (,).3 (,7).05 (,5) 7W07 W 7.7 (,).5 (3,3).9 (5,5) 7W07 W 7.7 (,).5 (3,3). (7,) 7W079 W (,).50 (,35).0 (,57) 7W079 W (,). (7,).0 (,57) 7W0730 W (,9).390 (9,9).300 (7,) 7W0730 W (,57). (,7). (3,00) 7W073 W (,0).0 (5,59).0 (3,05) 7W070 W (,0).30 (,).0 (,57) 7W070 W (9,05).375 (9,53).0 (,57) 7W0703 W (9,00).395 (0,03).093 (,3) 7W079 W (9,05).9 (,5).00 (,5) 7W0793 W (,75).0 (5,59).55 (3,9) 7W07500 W (9,05). (,3).095 (,) 7W0750 W (9,05).7 (,75).5 (3,9) 7W0750 W (,7).30 (9,).0 (,0) 7W07503 W (9,05).33 (,0).5 (3,) 7W0750 W (,75).3 (9,70).0 (,0) IV mpsales@microplastics.com micro plastics, inc. WEBSITE: 9

50 PEVIOUS PAGE O CON TEN TS IN DEX A-Z WASHES, SHOULDE WASHES AND SCEW INSULATOS IV NYLON SPECIAL LAT WASHES ITEM NUMBE DESCIPTION A B T 7W07505 W (,79).53 (3,9).7 (,75) 7W0750 W (9,05).390 (9,9).0 (,57) 7W07507 W (9,05).35 (,9).03 (0,79) 7W0750 W (9,05).390 (9,9).050 (,7) 7W07509 W (9,05).390 (9,9).0 (3,5) 7W0750 W (9,05).530 (3,).30 (5,) 7W075 W (9,05).5 (5,).70 (,3) 7W075 W (9,05).35 (9,7).00 (5,0) 7W0753 W (9,05).37 (,05).0 (,57) 7W075 W (9,05).93 (,90).00 (,0) 7W075 W (9,05).3 (9,70).0 (,) 7W0757 W (9,05).0 (0,3).03 (0,) 7W075 W (,9).3 (,5).095 (,) 7W0759 W (9,05). (5,5).7 (,75) 7W0750 W (,9).0 (,0).0 (,) 7W075 W (9,05).30 (,3).50 (,35) 7W0753 W (,9).0 (,0).5 (3,) 7W075 W (,7).5 (3,0).093 (,3) 7W0755 W (9,05).0 (0,3).00 (5,0) 7W0757 W (9,05).375 (9,53).5 (3,) 7W075 W (9,05).35 (9,7).00 (0,5) 7W0759 W (9,05).3 (7,7).375 (9,53) 7W07530 W (9,05).57 (,53).0 (,57) 7W0753 W (9,).55 (,7).030 (0,7) 7W0753 W (9,05).50 (3,).055 (,0) 7W07533 W (9,05).7 (,9).00 (5,0) 7W0753 W (7,0).73 (,0).90 (,3) 7W07535 W (9,05).30 (7,).5 (3,7) 7W0750 W (9,0) 57 (,).0 (,79) 7W0755 W (,9).509 (,93).50 (3,) 7W075 W (9,05).7 (,9).5 (,35) 7W077 W (9,05).9 (7,5).03 (0,) 7W0777 W (9,05).3 (,33).03 (0,) 7W077 W (9,3).39 (0,0).5 (3,) 7W0779 W (9,00).00 (0,).09 (,) 7W0770 W (9,3). (7,).3 (3,) 7W077 W (,0).5 (5,).095 (,) 7W07750 W (9,9).55 (3,0).50 (,35) 7W0775 W (9,9).500 (,70).0 (3,05) 7W07 W 7.7 (9,).0 (,).03 (0,79) 7W070 W 70.7 (9,).33 (,0).5 (3,) 7W07 W 7.77 (9,7).590 (,99).03 (0,) 7W0750 W (9,9).39 (0,0).00 (,03) 7W009 W (0,5). (0,).0 (,57) 7W0050 W (0,5).50 (,95).0 (5,59) 7W005 W (0,5). (5,77).5 (3,) 7W0070 W (0,50).0 (0,).05 (,5) 7W0090 W (0,55).95 (,57).059 (,50) 7W000 W 00.0 (0,57).35 (,05).00 (,5) 7W00 W 0.7 (0,75).5 (3,).0 (3,5) 7W0 W. (0,7).95 (7,5).093 (,3) 7W0 W. (0,).30 (,00).00 (,5) 7W03 W 3. (0,).3 (7,9).5 (3,) 50 TELEPHONE: (70) 53- / 53- micro plastics, inc. AX: (70) 53-7

51 PEVIOUS PAGE O CON TEN TS IN DEX A-Z WASHES, SHOULDE WASHES AND SCEW INSULATOS NYLON SPECIAL LAT WASHES ITEM NUMBE DESCIPTION A B T 7W05 W 5. (0,).30 (,00).0 (5,59) 7W0 W. (0,).3 (9,0).7 (,75) 7W05 W 5.5 (0,9).0 (,9).00 (,5) 7W000 W 00.0 (,3).730 (,5).5 (3,) 7W030 W 30. (,).5 (,).00 (,5) 7W05 W 5.5 (0,9).375 (9,53).00 (,5) 7W050 W 50.5 (,97).53 (3,9).00 (5,0) 7W05 W 5.5 (,97). (7,).55 (3,9) 7W00 W 0. (,97).3 (0,9).09 (,9) 7W0 W.7 (,5).37 (,0).50 (,75) 7W075 W (,3).3 (7,9).5 (3,) 7W075 W (,3).0 (0,3).00 (,5) 7W0753 W (,3).57 (,53).03 (0,79) 7W075 W 75.5 (,).33 (,7).0 (,57) 7W0755 W (,7).3 (7,9).5 (3,) 7W075 W (,3).500 (,70).5 (3,) 7W0757 W (,3).3 (7,9).7 (,75) 7W075 W 75.5 (,97).30 (,).7 (,75) 7W0759 W (,3).377 (9,5).0 (,57) 7W070 W (,3).30 (9,5).093 (,3) 7W07 W 7.75 (,3).390 (9,9).093 (,3) 7W07 W 7.75 (,3).57 (,53).0 (,57) 7W073 W (,3).7 (5,93). (,90) 7W07 W 7 7/ (,3).5 (,73).093 (,3) 7W075 W (,0).53 (3,9).7 (,75) 7W000 W 00.0 (,35).390 (9,9).0 (,57 7W00 W 0.7 (,5).35 (,00).0 (,57) 7W003 W 03. (,0).59 (,9).05 (,) 7W00 W 0.5 (,).35 (9,7).0 (,57) 7W00 W 0.0 (,35).500 (,70).05 (,5) 7W0 W.0 (,).35 (9,7).5 (3,) 7W0950 W (,).55 (,).5 (3,) 7W095 W (,).37 (,05).5 (,) 7W09000 W (,).375 (9,53).055 (,0) 7W0900 W (,).500 (,70).075 (,9) 7W0900 W (,).55 (3,0).00 (,5) 7W09 W (,).30 (5,).5 (3,) 7W0990 W (3,0).7 (,99). (3,0) 7W0930 W (3,7).3 (9,).03 (0,79) 7W0937 W (3,0).5 (5,).093 (,3) 7W0937 W (3,0).53 (,).0 (,57) 7W0937 W (3,0).50 (,73).0 (,0) 7W093 W (3,3).53 (,5).55 (3,9) 7W0900 W (3,9).33 (,).09 (,9) 7W090 W (3,).50 (,5).0 (,3) 7W090 W (,9).33 (,7).05 (,5) 7W09 W 9.9 (,99).0 (0,3).5 (3,) 7W095 W (,97).30 (9,).0 (3,05) 7W095 W (5,5). (0,57).00 (,5) 7W09900 W (5,0).375 (9,53).0 (,57) 7W0990 W 990 (5,0).7 (9,30).0 (,57) 7W09930 W (5,).77 (9,5). (3,5) 7W0993 W (5,0).390 (9,9).50 (,35) IV mpsales@microplastics.com micro plastics, inc. WEBSITE: 5

52 PEVIOUS PAGE O CON TEN TS IN DEX A-Z WASHES, SHOULDE WASHES AND SCEW INSULATOS IV NYLON SPECIAL LAT WASHES ITEM NUMBE DESCIPTION A B T 7W0000 W (5,0).5 (3,9).0 (,57) 7W000 W (5,0).50 (,3).5 (3,) 7W000 W (5,0).0 (0,3).0 (,57) 7W0003 W (5,0).5 (,7).5 (3,) 7W0005 W (5,0). (.05).5 (,70) 7W000 W (5,0).5 (3,).00 (,03) 7W0007 W (5,0).730 (,5).0 (,57) 7W000 W (5,0).3 (,03). (3,5) 7W0009 W (5,0).30 (,3).375 (9,53) 7W000 W (5,0).505 (,3).5 (3,) 7W00 W (5,0).3 (,03).05 (,5) 7W00 W (5,0).5 (,5).35 (,) 7W003 W 003 (5,0).3 (7,9).03 (0,) 7W00 W 00 (5,0) 5/ (7,9) 3/ (,7) 7W005 W 005 (5,0) 7/ (,7) 5/ (7,9) 7W00 W (5,0).500 (,70).00 (,5) 7W007 W (5,0).755 (9,).75 (,5) 7W005 W (5,7).35 (,3).50 (,35) 7W00 W (9,05).55 (3,0).50 (,35) 7W000 W (5,5).9 (,0).0 (,3) 7W000 W (5,5).0 (0,).00 (,5) 7W03 W (,9). (,).00 (,0) 7W0570 W (,5). (0,).5 (3,) 7W057 W 057 (5,0). (,).5 (3,) 7W00 W (,9).70 (,0).0 (,5) 7W0 W 0.0 (,97).70 (,0).5 (5,7) 7W05 W (,0).0 (0,3) (,35) 7W000 W 000. (,5).05 (5,37).39 (,07) 7W00 W 00. (30,00).3 (0,9).09 (,9) 7W00 W 00.7 (,37).75 (,3).95 (,95) 7W0 W 0.0 (,5).390 (9,9).5 (3,) 7W03 W 03.0 (,5).503 (,7).033 (0,) 7W0 W 0.0 (,5).35 (,3).0 (3,5) 7W W. (,7).3 (,03).03 (0,) 7W W.3 (,70).3 (,00).0 (,5) 7W5 W 5.0 (,5).50 (3,7).5 (3,) 7W W.5 (,5).9 (,5).00 (,5) 7W57 W 57.5 (,5).500 (,70).0 (,57) 7W70 W 70.7 (9,7).377 (9,5).5 (3,) 7W750 W (9,5).30 (7,7).5 (3,) 7W00 W 00. (30,07).77 (,).079 (,0) 7W03 W (30,5).9 (,99).050 (,7) 7W03 W 03. (3,57). (,35).0 (,57) 7W W. (30,9).03 (,9).00 (,0) 7W50 W 50.5 (3,).3 (,33).00 (,5) 7W5 W 5.5 (3,).00 (5,3).03 (0,79) 7W50 W (3,37).35 (9,7).0 (,79) 7W50 W (3,75).75 (,3).5 (3,) 7W503 W (3,75).75 (9,3).00 (,03) 7W50 W (3,75).5 (3,).0 (,57) 7W505 W (3,).390 (9,9).05 (,) 7W50 W (3,75).50 (,35).55 (,) 7W507 W (3,75).05 (0,5).00 (,5) 5 TELEPHONE: (70) 53- / 53- micro plastics, inc. AX: (70) 53-7

53 PEVIOUS PAGE O CON TEN TS IN DEX A-Z WASHES, SHOULDE WASHES AND SCEW INSULATOS NYLON SPECIAL LAT WASHES ITEM NUMBE DESCIPTION A B T 7W50 W (3,75). (7,).03 (,0) 7W509 W 509 (3,75) 9/ (,9) /3 (0,79) 7W50 W (3,75). (0,).00 (,03) 7W5 W 5 7/ (3,3).390 (9,90).5 (3,9) 7W5 W 5.50 (3,75).30 (7,).5 (3,) 7W53 W (3,75).30 (7,7).0 (3,05) 7W55 W 55.0 (3,00).30 (,).50 (,35) 7W57 W (3,75).57 (,53).55 (,) 7W W (3,75).50 (,35).0 (,57) 7W50 W 50.5 (3,95). (5,7).05 (,5) 7W593 W (3,75).00 (,5).00 (,5) 7W0 W 0.7 (3,3).00 (0,).0 (,57) 7W30 W (33,7).5 (,3).0 (3,05) 7W30 W 30.3 (33,3).000 (5,0).9 (,5) 7W3 W 3.3 (33,3).0 (7,3).0 (,57) 7W3 W 3.3 (33,3).000 (5,0).5 (3,) 7W35 W 35.3 (33,3).0 (,0).9 (,5) 7W379 W (,0).30 (7,5).5 (3,) 7W3750 W (3,93).50 (,35).0 (7,3) 7W375 W (3,93).55 (3,3).5 (3,) 7W375 W (3,93).50 (,95).0 (,57) 7W3753 W (3,93).5 (,).5 (3,) 7W375 W (3,93).330 (,3).5 (3,) 7W3755 W (33,7).93 (3,).00 (,0) 7W375 W (3,).53 (3,).05 (,30) 7W3757 W (3,93).50 (,3).090 (,9) 7W375 W (3,93).530 (3,).73 (,39) 7W3759 W (3,93).05 (5,7).5 (3,) 7W50 W 50.0 (3,07).70 (9,30).00 (,5) 7W5 W (35,3).50 (,35). (3,00) 7W37 W (3,50).000 (5,0).09 (,75) 7W50 W (3,3).000 (5,0).03 (,5) 7W0 W 0.5 (37,03).0 (9,97).00 (,5) 7W W. (37,9).55 (3,0).050 (,7) 7W930 W (3,0).37 (,0).30 (3,30) 7W5000 W (3,0). (,75).0 (,7) 7W500 W (3,0).5 (,9).09 (,39) 7W500 W (3,0).500 (,70).5 (3,) 7W5003 W (3,0).375 (9,53).375 (9,53) 7W500 W (3,0).755 (9,).5 (3,) 7W5005 W (3,0).9 (7,).0 (3,05) 7W500 W (37,5).5 (3,3).0 (3,05) 7W5007 W (0,0).59 (,7). (3,00) 7W500 W (3,0).05 (5,7).00 (,03) 7W50 W (3,0).505 (,3).30 (3,30) 7W503 W (3,0).55 (3,0).37 (,0) 7W5050 W (3,3).750 (9,05).053 (,35) 7W505 W (37,5). (0,57).0 (,57) 7W505 W (39,7).5 (3,00). (3,00) 7W50 W (39,70).000 (5,0).0 (,57) 7W55 W 55-9/ (39,70).30 (,00).0 (,57) 7W0 W 0.9 (,).95 (37,97).5 (,) 7W50 W 50.5 (,).53 (3,9).3 (7,9) IV TELEPHONE (70) 53- / 53- micro plastics, inc. AX (70)

54 IV Q TABLE PEVIOUS PAGE WASHES, SHOULDE WASHES AND SCEW INSULATOS NYLON SPECIAL LAT WASHES ITEM NUMBE DESCIPTION A B T 7W5 W 5.5 (,).375 (3,93).0 (,79) 7W5 7W300 7W5 7W900 7W7 7W7 7W75 7W75 7W7500 7W00 7W500 7W900 7W000 7W000 7W0003 7W000 7W000 7W00 7W003 7W00 7W000 7W350 7W50 7W005 7W500 7W00 7W500 7W5003 7W0 7W9300 7W9503 7W W3000 7W W W350 7W300 O CON TEN TS W 5 W 300 W 5 W 900 W 7 W 7 W 75 W 75 W 7500 W 00 W 500 W 900 W 000 W 000 W 0003 W 000 W 000 W 00 W 003 W 00 W 000 W 350 W 50 W 005 W 500 W 00 W 500 W 5003 W 0 W 9300 W 9503 W W 3000 W W W 350 W 300 IN DEX A-Z.5 (,).35 (,53).50 (,9).95 (3,05).7 (3,).7 (3,79).5 (3,90).90 (37,5).750 (,5).00 (5,7).50 (,99).90 (,).0 (5,05).000 (50,0).000 (50,0).000 (50,0).000 (50,0).95 (50,).000 (50,0) (50,0).00 (5,3) 9/ (5,3).0 (55,37).05 (5,0).0 (57,0).75 (57,79).500 (3,50).500 (3,50).9 (,33).930 (7,).935 (7,93) (7,0).970 (75,) 3.0 (7,).995 (7,07) 3.3 (79,55) 3.0 (,0).0 (5,0).05 (35,9).395 (35,3).55 (3,).5 (5,).500 (3,0).97 (7,70).75 (9,3).9 (3,57).9 (,0).0 (,).500 (3,0). (3,5).50 (,95).55 (3,75).00 (7,3).30 (,00).55 (3,75).35 (33,).05 (0,5).00 (5,7).70 (,70).0 (3,07).70 (3,9).00 (5,5).75 (3,39).075 (7,3).750 (,5).93 (9,0). (,05).5 (9,).70 (3,).90 (37,5).0 (7,).5 (,). (0,).0 (,55).7 (,75).093 (,3).0 (3,5).05 (,5).050 (,7).03 (0,).00 (,5).00 (,5).75 (,99).057 (,5).0 (3,05).093 (,3).35 (3,3).00 (,5).00 (,5).0 (,0).5 (3,).5 (3,).30 (7,7).0 (,57).055 (,0).30 (3,30).050 (,7).050 (,7).075 (,9).0 (3,05).5 (3,).5 (3,).5 (3,).50 (3,).093 (,5).093 (,3).5 (3,).07 (,3).093 (,3).5 (3,).0 (,57) NYLON SCEW INSULATOS AE DESIGNED TO : POTECT THE HEAD O A TAL SCEW OM ELECTICAL CONTACT. ACCOODATE THE MOST COON SCEW HEAD-STYLES INCLUDING: CHEESE, PAN AND ILLISTE, IN SIZES OM # TO. CUP WASHES AE MOLDED OM TOUGH, ELECTICALLY INSULATING NYLON /. NYLON CUP WASHES ITEM NUMBE A B C D E CW0000 CW0000 CW0000 CW0000 CW (7,7).30 (9,). (0,5).70 (,9).595 (5,).5 (,).300 (7,).35 (,99).0 (0,).535 (3,59).5 (,9).0 (3,5).7 (,3).9 (,93).57 (,53).7 (,97). (3,). (,).90 (,3).7 (,7).57 (3,99). (,).0 (5,3).30 (5,5).7 (7,9) 5 TELEPHONE: (70) 53- / 53- micro plastics, inc. AX: (70) 53-7

55 PEVIOUS PAGE O CON TEN TS IN DEX A-Z WASHES, SHOULDE WASHES AND SCEW INSULATOS NYLON SCEW INSULATOS ITEM NUMBE DESCIPTION L A B C D 0SC000 0SC000 0SC0005 0SC SC SC0000 0SC0000 0SC SC000 0SC0005 0SC000 0SC0005 0SC SC SC0000 0SC0000 0SC SC000 0SC0005 0SC000 0SC0005 0SC SC SC000 0SC000 0SC0005 0SC SC SC000 0SC SC0000 0SC000 0SC000 0SC0005 0SC SC SC0005 0SC000 0SC SC500 0SC500 0SC500 0SC5005 0SC SC SC500 0SC SC30 0SC305 0SC3037 0SC3050 0SC30 SC SC SC SC SC SC SC SC SC SC SC SC SC SC SC SC SC SC SC SC SC SC SC SC SC SC SC SC SC SC SC 0 SC 0 SC 0 SC 0 SC 0 SC 0 SC 0 SC 0 SC 0 SC 50 SC 50 SC 50 SC 50 SC 50 SC 50 SC 50 SC 50 SC 3 SC 3 SC 3 SC 3 SC 3 / (3,) 3/ (,7) (,35) (9,53) /3 (0,79) 3/ (,9) / (,59) 3/3 (,3) / (3,) 5/3 (3,97) 3/ (,7) (,35) (9,53) / (,70) 3/ (,9) / (,59) 3/3 (,3) / (3,) 5/3 (3,97) 3/ (,7) (,35) (9,53) / (,70) / (3,) 9/ (3,5) (,35) (9,53) / (,70) (5,) (9,05) / (,59) 9/ (3,5) 3/ (,7) (,35) (9,53) / (,70) 9/ (,9) (5,) (9,05) / (3,) 9/ (3,5) 3/ (,7) (,35) (9,53) / (,70) (5,) (9,05) / (3,) (,35) (9,53) / (,70) (5,). (,0). (,0). (,0). (,0).35 (5,97).35 (5,97).35 (5,97).35 (5,97).35 (5,97).35 (5,97).35 (5,97).35 (5,97).35 (5,97).35 (5,97).90 (7.37).90 (7,37).90 (7,37).90 (7,37).90 (7,37).90 (7,37).90 (7,37).90 (7,37).90 (7,37).3 (,7).3 (,7).3 (,7).3 (,7).3 (,7).3 (,7).3 (,7).399 (0,3).399 (0,3).399 (0,3).399 (0,3).399 (0,3).399 (0,3).399 (0,3).399 (0,3).399 (0,3).53 (3,03).53 (3,03).53 (3,03).53 (3,03).53 (3,03).53 (3,03).53 (3,03).53 (3,03).0 (5,75).0 (5,75).0 (5,75).0 (5,75).0 (5,75) 3/ (,9) 3/ (,9) 3/ (,9) 3/ (,9) 3/ (,9) 3/ (,9) 3/ (,9) 3/ (,9) 3/ (,9) 3/ (,9) 3/ (,9) 3/ (,9) 3/ (,9) 3/ (,9) 3/ (.9) 3/ (,9) 3/ (,9) 3/ (,9) 3/ (,9) 3/ (,9) 3/ (,9) 3/ (,9) 3/ (,9) / (,59) / (,59) / (,59) / (,59) / (,59) / (,59) / (,59) / (,59) / (,59) / (,59) / (,59) / (,59) / (,59) / (,59) / (,59) / (,59) / (,59) / (,59) / (,59) / (,59) / (,59) / (,59) / (,59) / (,59) / (,59) / (,59) / (,59) / (,59) / (,59).0 (3,05).0 (3,05).0 (3,05).0 (3,05).5 (3,).5 (3,).5 (3,).5 (3,).5 (3,).5 (3,).5 (3,).5 (3,).5 (3,).5 (3,).70 (,3).70 (,3).70 (,3).70 (,3).70 (,3).70 (,3).70 (,3).70 (,3).70 (,3).05 (5,).05 (5,).05 (5,).05 (5,).05 (5,).05 (5,).05 (5,).0 (,0).0 (,0).0 (,0).0 (,0).0 (,0).0 (,0).0 (,0).0 (,0).0 (,0).3 (7,9).3 (7,9).3 (7,9).3 (7,9).3 (7,9).3 (7,9).3 (7,9).3 (7,9).30 (9,).30 (9,).30 (9,).30 (9,).30 (9,).090 (,9).090 (,9).090 (,9).090 (,9).5 (,9).5 (,9).5 (,9).5 (,9).5 (,9).5 (,9).5 (,9).5 (,9).5 (,9).5 (,9).0 (3,5).0 (3,5).0 (3,5).0 (3,5).0 (3,5).0 (3,5).0 (3,5).0 (3,5).0 (3,5).73 (,39).73 (,39).73 (,39).73 (,39).73 (,39).73 (,39).73 (,39).00 (5,0).00 (5,0).00 (5,0).00 (5,0).00 (5,0).00 (5,0).00 (5,0).00 (5,0).00 (5,0).0 (,0).0 (,0).0 (,0).0 (,0).0 (,0).0 (,0).0 (,0).0 (,0).30 (,3).30 (,3).30 (,3).30 (,3).30 (,3) NYLON SCEW INSULATOS AE USED TO : ISOLATE TAL SCEWS ELECTICALLY EDUCE COOSION SCEW INSULATOS MAY ALSO BE USED AS LIGHT LOAD BEAINGS IN MANY APPLICA- TIONS. SPECIY SCEW SIZE AND LENGTH WHEN ODEING. SPECIALS CAN MADE TO ODE O A SMALL TOOLING CHAGE IV mpsales@microplastics.com micro plastics, inc. WEBSITE: 55

56 PEVIOUS PAGE O CON TEN TS IN DEX A-Z WASHES, SHOULDE WASHES AND SCEW INSULATOS IV NYLON SHOULDE WASHES AE SUIT- ABLE O A LAGE VAIETY O INSULA- TION AND CHANICAL APPLICATIONS. THEY SEAL EDUCE VIBATION ACT AS SPACES AND GUIDES STONG AND COOSION ESISTANT NYLON SHOULDE WASHES ITEM NUMBE DESCIPTION L A B C D SWS05 SWS055 SWS05 SWS057 SWS05 SWS00 SWS0 SWS03 SWS0 SWS07 SWS0 SWS09 SWS090 SWS09 SWS095 SWS09 SWS097 SWS09 SWS099 SWS000 SWS00 SWS00 SWS003 SWS00 SWS005 SWS00 SWS007 SWS00 SWS009 SWS00 SWS0 SWS0 SWS03 SWS0 SWS05 SWS0 SWS07 SWS0 SWS09 SWS00 SWS0 SWS0 SWS03 SWS0 SWS05 SWS0 SWS07 SWS0 SWS09 SWS030 SWS03 SWS033 SWS03 SWS 5 SWS 55 SWS 5 SWS 57 SWS 5 SWS 0 SWS SWS 3 SWS SWS 7 SWS SWS 9 SWS 90 SWS 9 SWS 95 SWS 9 SWS 97 SWS 9 SWS 99 SWS 00 SWS 0 SWS 0 SWS 03 SWS 0 SWS 05 SWS 0 SWS 07 SWS 0 SWS 09 SWS 0 SWS SWS SWS 3 SWS SWS 5 SWS SWS 7 SWS SWS 9 SWS 0 SWS SWS SWS 3 SWS SWS 5 SWS SWS 7 SWS SWS 9 SWS 30 SWS 3 SWS 33 SWS 3 3/ (,9).00 (,5) /3 (0,79).035 (0,9).50 (,35).075 (,9) /3 (0,79) /3 ( 0,79) /3 (0,79) / (0,).030 (0,7).0 (0,5) 9/3 (7,).00 (,5) / (,59) 3/ (,9) /3 (0,79) /3 (0,79) 5/ (,9) /3 (0,79) 3/ (,7) 5/ (,9) 7/ (,77) 3/ (,7) 3/ (,9) / (,59) 5/3 (3,97) / (,59) 3/ (,9) 3/ (,9) /3 (0,79) 7/ (,) 3/ (,9) /3 (0,79) 7/3 (5,55) /3 (0,79) /3 (0,79) / (3,) / (3,) 3/ (,9) 3/3 (,3) / (3,) /3 (0,79) 3/ (,9) 3/ (7,0) / (,59) /3 (0,79) / (0,) / (3,) 5/3 (3,97) 5/ (,9) /3 (0,79).050 (,0).05 (,7).5 (3,). (5,79).35 (5,97).7 (,75). (,0). (,75). (,).9 (,0).7 (,75).7 (,75).7 (,75).97 (5,00).350 (,9).95 (,95).0 (,09). (5,).00 (5,0).7 (,75).00 (5,0).7 (,75).05 (5,).05 (5,).05 (5,).0 (5,3). (5,9).35 (5,97).00 (5,0).0 (5,33).30 (5,). (5,5). (5,9).00 (5,0).35 (5,97).50 (,35).0 (,0). (5,79). (,5).90 (7,37).3 (5,9).35 (5,97).35 (5,97).50 (,35).0 (,0).50 (,35).50 (,35).57 (,53).0 (,0).50 (,35).5 (,73).53 (,).03 (5,).39 (,07) 3/ (,9).030 (0,7) /3 (0,79).095 (,).07 (,9) 3/ (,9) / (,59) 5/ (,9) / (,59) /3 (0,79).030 (0,7).030 (0,7) /3 (0,79).090 (,9) /3 (0,79) / (,59) 3/ (,9) /3 (0,79) /3 (0,79) 5/ (,9) /3 (0,79) /3 (0,79) /3 (0,79) /3 (0,79) / (0,) /3 (0,79) 3/ (,9) /3 (0,79) / (0,) / (0,) 3/ (,9) /3 (0,79) /3 (0,79) 3/ (,9) / (,37) /3 (0,79) 3/ (,9) 3/ (,9) / (0,) 3/ (,9) 3/ (,9) 3/ (,9) / (,59) / (,59) 3/ (,9) /3 (0,79) / (,59) / (0,) 3/ (,9) /3 (0,79) 3/ (,9) 3/ (,9).00 (0,5).0 (,3).00 (,03). (3,0).7 (3,73).0 (3,05).0 (3,05).3 (3,33).5 (3,).9 (3,0).9 (3,0).3 (3,33).9 (3,0). (3,00).00 (5,0).0 (3,05).35 (3,).35 (3,).0 (3,5).9 (3,0).35 (3,3).9 (3,0).5 (3,).5 (3,).5 (3,).5 (3,).5 (3,9).35 (3,3).0 (3,05).5 (3,). (3,).35 (3,3).5 (3,9).3 (3,5).37 (3,).50 (3,).50 (3,).3 (3,5).0 (3,5).50 (,35).7 (3,73).5 (3,).5 (3,).7 (,75).90 (,3).7 (,75).3 (3,3).7 (,75).5 (3,9).39 (3,53).05 (5,).3 (3,5).0 (3,5).39 (3,53).0 (,55).055 (,0).093 (,3).5 (,9).090 (,9).05 (,).05 (,).05 (,).095 (,).09 (,).090 (,9).090 (,9).075 (,9).0 (3,5).093 (,3). (,9).5 (,9).5 (,9).03 (,0). (,95).03 (,0).093 (,3).093 (,3).093 (,3).0 (3,05).0 (3,05).0 (,79).093 (,3).0 (3,05). (3,0).5 (,9).0 (3,05).09 (,77).5 (,77).5 (,9).09 (,9).00 (,5).5 (,9).93 (,90).5 (,9).5 (,9).5 (,9).0 (3,5).0 (3,5).095 (,). (3,00). (3,5).095 (,). (3,00). (3,).0 (3,05).5 (,9). (,95) 5 TELEPHONE: (70) 53- / 53- micro plastics, inc. AX: (70) 53-7

57 PEVIOUS PAGE O CON TEN TS IN DEX A-Z WASHES, SHOULDE WASHES AND SCEW INSULATOS NYLON SHOULDE WASHES ITEM NUMBE DESCIPTION L A B C D SWS035 SWS03 SWS037 SWS03 SWS039 SWS00 SWS0 SWS0 SWS03 SWS0 SWS05 SWS0 SWS07 SWS050 SWS055 SWS090 SWS09 SWS09 SWS0300 SWS0305 SWS030 SWS030 SWS0395 SWS039 SWS000 SWS00 SWS00 SWS003 SWS00 SWS005 SWS00 SWS007 SWS00 SWS009 SWS00 SWS0 SWS0 SWS03 SWS0 SWS05 SWS0 SWS07 SWS0 SWS09 SWS00 SWS0 SWS0 SWS03 SWS0 SWS05 SWS0 SWS07 SWS0 SWS 35 SWS 3 SWS 37 SWS 3 SWS 39 SWS 0 SWS SWS SWS 3 SWS SWS 5 SWS SWS 7 SWS 50 SWS 55 SWS 90 SWS 9 SWS 9 SWS 300 SWS 305 SWS 30 SWS 30 SWS 395 SWS 39 SWS 00 SWS 0 SWS 0 SWS 03 SWS 0 SWS 05 SWS 0 SWS 07 SWS 0 SWS 09 SWS 0 SWS SWS SWS 3 SWS SWS 5 SWS SWS 7 SWS SWS 9 SWS 0 SWS SWS SWS 3 SWS SWS 5 SWS SWS 7 SWS.033 (0,.00 (0,5).00 (,0).030 (0,7).090 (,9).00 (,5).55 (3,9) 3/3 (,3).03 (,0).03 (0,79).093 (,3).07 (0,9) 3/ (,9).5 (3,9) / (,9) /3 (0,79).375 (9,53).375 (9,53).090 (,9).0 (3,05).0 (,57).50 (,35).05 (0,).00 (,0) 3/3 (,3) (,35) 3/ (,9) / (,59) 3/3 (,3) / (0,) /3 (0,79) /3 (0,79).50 (,35) / (3,) /3 (0,79) / (,59) / (,59) 3/3 (,3) / (3,) 3/ (,7) / (,37) / (0,) / (0,) /3 (0,79) / (,59) 3/ (,9) / (3,) / (0,) 7/3 (5,55) /3 (0,79) / (,37) 3/ (,9) 7/ (,77).0 (5,33).50 (,35).35 (5,97).30 (5,). (5,9).30 (5,). (5,9).35 (,3) 5/ (5,9).3 (5,9).35 (5,97).0 (,0).5 (,0).5 (,73).500 (,70).90 (7,37).90 (7,37).99 (,7).50 (,35).50 (,35).50 (,35).50 (,35).50 (,35).50 (,35).35 (5,97).35 (5,97).0 (,09).3 (7,93).3 (7,93).50 (,35).5 (,0).50 (,35).35 (5,97).50 (,35).50 (,35).50 (,35).50 (,35).50 (,35). (7,).93 (7,).50 (,35).30 (7,7).3 (7,93).3 (7,93).3 (7,93).3 (7,93).3 (7,93).50 (,35).95 (7,9).3 (7,93).50 (,35).50 (,35). (,5).0 (,07).030 (0,7).07 (,9).00 (,0).0 (0,7).05 (0,).0 (0,7) 9/ (3,57).05 (0,).05 (0,).50 (,35).07 (,9) 3/ (,9) (3,00) / (,9) 3/ (,9).3 (5,9).5 (3,).050 (,7).050 (,7).03 (0,79).07 (,9).03 (0,79).07 (,9) 3/ (,9) 3/ (,9) / (,59) / (,59) / (,59) 3/ (,9) /3 (0,79) /3 (0,79).03 (0,) /3 (0,79) 3/ (,9) /3 (0,79) /3 (0,79) 3/ (,9) 3/3 (,3) 3/ (,9) 3/ (,9) / (,59) / (,59) /3 (0,79) / (,59) / (,59) 3/ (,9) /3 (0,79) /3 (0,79) / (,59) 3/ (,9) /3 (0,79) 3/ (,9).3 (3,3).50 (3,).7 (3,73).50 (3,).5 (3,9).90 (,3).5 (3,9).5 (0,0). (,7).5 (3,).5 (3,).3 (3,0).0 (3,5).05 (5,).375 (9,53).70 (,3).70 (,3).95 (7,9).50 (3,).35 (3,3).50 (3,).5 (3,9). (3,0).0 (3,5).0 (3,5).5 (3,).3 (3,50).9 (3,79).9 (3,79). (3,5). (,7). (,7).0 (3,05).95 (,95). (,90).3 (3,3).9 (,9). (,90).5 (,0). (5,53). (,7).3 (,5).7 (,75).5 (,70).70 (,3).70 (,3).3 (5,9).50 (3,).3 (5,9).50 (,35).5 (3,).5 (,70).0 (3,5). (,95). (,9).5 (,9).5 (3,).0 (3,05).50 (3,).0 (3,05).0 (5,).30 (3,30).5 (,9).5 (,9).5 (,9).5 (,9). (3,).5 (7,).0 (3,5).0 (3,5).7 (,75).0 (3,05). (3,00). (,95).5 (3,).093 (,3).0 (,59).5 (,9).5 (,9). (,9).5 (,9).5 (,9). (,).0 (3,5).39 (3,53).090 (,9).30 (3,30).00 (,5).5 (,9).0 (,59).00 (,5).093 (,3).3 (3,5). (3,0).39 (3,53).5 (,9).0 (3,5).0 (3,05).7 (3,3). (3,). (,95).0 (3,5).9 (,9).5 (,9). (,95).5 (,9) NYLON SHOULDE WASHES AE SUIT- ABLE O A LAGE VAIETY O INSULA- TION AND CHANICAL APPLICATIONS. THEY SEAL EDUCE VIBATION ACT AS SPACES AND GUIDES IV STONG AND COOSION ESISTANT mpsales@microplastics.com micro plastics, inc. WEBSITE: 57

58 PEVIOUS PAGE O CON TEN TS IN DEX A-Z WASHES, SHOULDE WASHES AND SCEW INSULATOS IV NYLON SHOULDE WASHES AE SUIT- ABLE O A LAGE VAIETY O INSULA- TION AND CHANICAL APPLICATIONS. THEY SEAL EDUCE VIBATION ACT AS SPACES AND GUIDES STONG AND COOSION ESISTANT NYLON SHOULDE WASHES ITEM NUMBE DESCIPTION L A B C D SWS09 SWS030 SWS03 SWS03 SWS033 SWS03 SWS035 SWS03 SWS037 SWS03 SWS039 SWS0 SWS0 SWS0 SWS03 SWS0 SWS05 SWS0 SWS0 SWS09 SWS050 SWS05 SWS05 SWS053 SWS05 SWS055 SWS05 SWS057 SWS059 SWS00 SWS0 SWS03 SWS0 SWS05 SWS07 SWS0 SWS09 SWS070 SWS075 SWS00 SWS00 SWS003 SWS005 SWS00 SWS007 SWS00 SWS009 SWS00 SWS0 SWS0 SWS05 SWS0 SWS0 SWS 9 SWS 30 SWS 3 SWS 3 SWS 33 SWS 3 SWS 35 SWS 3 SWS 37 SWS 3 SWS 39 SWS SWS SWS SWS 3 SWS SWS 5 SWS SWS SWS 9 SWS 50 SWS 5 SWS 5 SWS 53 SWS 5 SWS 55 SWS 5 SWS 57 SWS 59 SWS 0 SWS SWS 3 SWS SWS 5 SWS 7 SWS SWS 9 SWS 70 SWS 75 SWS 0 SWS 0 SWS 03 SWS 05 SWS 0 SWS 07 SWS 0 SWS 09 SWS 0 SWS SWS SWS 5 SWS SWS 9/ (3,5) 3/ (,7) 3/3 (,3) 3/ (,9) 7/ (,77) / (,59) 3/ (,9) /3 (0,79) /3 (0,79) /3 (0,79) / (,59) 5/ (7,9) 3/ (,7) 7/3 (5,5).5 (3,9) / (,59) /3 (0,79) / (0,) 3/3 (,3) /3 (0,79) / (,59) /3 (0,79) /3 (0,79).07 (0,9) /3 (0,79) 3/ (,9) 3/ (,9).03 (0,79) 5/ (5,9).5 (3,).03 (0,79).050 (,7) 9/ (7,5).00 (,5).0 (,57).50 (,35). (3,0).5 (0,79).00 (,5) (,35) /3 (0,79).0 (,57) 3/ (,9) 3/ (,9) / (,59) 3/ (,9) 3/ (,9) / (,59) 3/3 (,3) /3 (0,79).05 (,5) 3/3 (,3) (9,53).50 (,35).3 (7,93).0 (,0).50 (,35).50 (,35).3 (7,93).50 (,35).0 (,0).5 (,73).3 (7,93).50 (,35).3 (7,93).3 (7,93).9 (7,5).5 (,0).300 (7,).33 (7,95).3 (7,93).3 (7,93).33 (7,95).3 (7,93).35 (,00).3 (7,93).3 (7,93).33 (7,95).3 (7,93).50 (,35).50 (,35).9 (7,39).90 (7,37).3 (7,93).3 (7,93).50 (,35).3 (7,93).3 (7,93).3 (7,93).3 (9,5).90 (7,37).3 (7,93).90 (7,37).330 (,3).300 (7,).3 (,33).30 (,).9 (7,3).90 (7,37).3 (7,93).3 (,3).3 (,03).3 (,3).30 (,3).30 (,).35 (,7) 3/ (,9) / (,59) /3 (0,79) 3/ (,9) 3/ (,9) 3/ (,9) / (,59) 3/ (,9) /3 (0,79) / (,59) 3/ (,9) /3 (0,79) /3 (0,79) /3 (0,79).07 (,9) 3/ (,9) /3 (0,79) 3/ (,9) 3/ (,9) /3 (0,79) 3/ (,9).030 (0,7) 3/ (,9).035 (0,9) /3 (0,79) /3 (0,79) 3/ (,9).03 (0,79) / (,59).07 (,9).03 (,0).0 (,7) 3/ (,9).030 (0,7).03 (,0).00 (,5).7 (,75).07 (,9).05 (,) 3/ (,9) / (,59).050 (,7) 3/ (,9) 5/ (,9) / (,59) 3/ (,9) /3 (0,79) /3 (0,79) 3/ (,9) / (,59).050 (,7) / (,59) / (,59).5 (3,).50 (,35).5 (,70).3 (3,3).5 (3,).70 (,3).5 (,70).39 (3,53).57 (3,99).7 (,75).3 (3,50).5 (3,9).3 (5,9).35 (5,97).0 (3,5).9 (,93).75 (,5).0 (,0).7 (,75).9 (5,5).3 (5,9).50 (3,).03 (5,).7 (,75).9 (5,5).5 (,70).5 (3,9).7 (,75).5 (3,9).70 (,3).7 (,75).9 (5,).5 (3,).9 (,0). (3,0).0 (5,33).07 (5,).00 (5,0).50 (3,).70 (,3).0 (5,3).0 (,57). (5,5).50 (,35).5 (5,).70 (,3).5 (,70).90 (7,3).5 (,0).0 (5,). (,).0 (5,59).05 (5,).5 (,9).5 (3,9).5 (3,).3 (,7).5 (,9).0 (3,5). (,95).5 (,9). (3,0). (3,5).0 (3,05).30 (3,30). (,7).35 (3,3).5 (,9).0 (,0).3 (3,3).097 (,). (3,5). (3,5). (3,).5 (,9).0 (3,05).0 (3,5).3 (3,5). (3,0).5 (,9).0 (3,05).0 (3,05).0 (3,5).3 (3,).3 (,3).5 (,9). (3,).09 (0,3). (3,).0 (,0).5 (3,). (,90).0 (3,5). (3,5).50 (3,). (3,7).0 (3,5).093 (,3).0 (3,5). (,95). (,50). (,95).0 (3,5). (3,5).75 (,5).73 (,39) 5 TELEPHONE: (70) 53- / 53- micro plastics, inc. AX: (70) 53-7

59 PEVIOUS PAGE O CON TEN TS IN DEX A-Z WASHES, SHOULDE WASHES AND SCEW INSULATOS NYLON SHOULDE WASHES ITEM NUMBE DESCIPTION L A B C D SWS09 SWS030 SWS0 SWS033 SWS03 SWS079 SWS0799 SWS000 SWS00 SWS00 SWS003 SWS00 SWS005 SWS00 SWS007 SWS00 SWS009 SWS00 SWS0 SWS0 SWS03 SWS0 SWS05 SWS0 SWS07 SWS0 SWS09 SWS00 SWS0 SWS0 SWS03 SWS0 SWS05 SWS0 SWS07 SWS0 SWS09 SWS030 SWS03 SWS0 SWS033 SWS03 SWS035 SWS037 SWS039 SWS00 SWS0 SWS0 SWS0 SWS0 SWS07 SWS0 SWS050 SWS 9 SWS 30 SWS SWS 33 SWS 3 SWS 79 SWS 799 SWS 00 SWS 0 SWS 0 SWS 03 SWS 0 SWS 05 SWS 0 SWS 07 SWS 0 SWS 09 SWS 0 SWS SWS SWS 3 SWS SWS 5 SWS SWS 7 SWS SWS 9 SWS 0 SWS SWS SWS 3 SWS SWS 5 SWS SWS 7 SWS SWS 9 SWS 30 SWS 3 SWS SWS 33 SWS 3 SWS 35 SWS 37 SWS 39 SWS 0 SWS SWS SWS SWS SWS 7 SWS SWS 50 3/ (,9) 3/ (5,) / (,59).00 (,5) / (,37).00 (,03) 3/ (,9) 9/ (3,5) (9,53) / (,59) 3/3 (0,3).77 (,50).3 (7,9).50 (,.35).0 (,7) / (3,) 5/3 (3,97) /3 (0,79) 3/ (,9) 3/3 (,3) 7/ (,77) 3/ (,9) 3/3 (,3) /3 (0,79) 3/ (,9) /3 (0,79) / (,59) /3 (0,79) /3 (0,79) /3 (0,79).099 (,5).05 (,7).00 (,5).0 (,57).0 (,7).5 (3,) / (3,).03 (0,).50 (,35).03 (,09).050 (,7).05 (0,3).050 (,7).03 (0.79).050 (,7) 3/ (5,) / (3,7) 5/ (,9) 3/ (,9) / (,59).3 (5,) /3 (0,79) / (,59).35 (,7).3 (9,3).39 (,7).39 (,7).350 (,9).3 (,7).3 (,7).3 (,7).3 (,7).375 (9,53).50 (,95).355 (9,0).370 (9,0).3 (,.7).359 (9,).375 (9,53).37 (9,0).375 (9,53).375 (9,53).375 (9,53).375 (9,53).375 (9,53).375 (9,53).375 (9,53).375 (9,53).375 (9,53).37 (,0).375 (9,53).3 (9,).37 (9,50).375 (9,53) (9,53).375 (9,53).500 (,70).375 (9,53).30 (9,5).370 (9,0).375 (9,53).375 (9,53).375 (9,53).375 (9,53).375 (9,53).377 (9,5).375 (9,53).35 (9,7).370 (9,0) (9,5).375 (9,53).3 (9,).375 (9,53).375 (9,53).35 (9,7).375 (9,53) / (,59) 5/ (,9) 3/ (,9).050 (,7) / (0,).03 (,0) 7/ (,77) / (,59) / (,59) /3 (0,79) / (,59).00 (0,5).07 (,70).03 (0,).00 (,5) / (,59) 5/ (,9) / (,59) 3/ (,9) /3 (0,79) 3/ (,9) 5/ (,9) /3 (0,79) /3 (0,79) / (,59) / (,59) / (,59) / (,59) / (,59) /3 (0,79).00 (,0).0 (,5).030 (0,7) / (,59).00 (,0).05 (,5).0 (,79).0 (,57).00 (,0).035 (0,7).03 (0,79).057 (,5).050 (,7).0 (,57).030 (0,7) 5/ (,9).035 (0,9) 7/3 (5,55) / (,59) 3/3 (,3) / (,59) / (,59) 3/3 (,3).09 (5,30). (3,70). (,30).0 (.,0).300 (7,).35 (5,97).9 (,0).0 (5,33).05 (5,).95 (,95).50 (,35).35 (,00). (,5).05 (5,).300 (7,).0 (7,).9 (,9).50 (,35).5 (,).0 (,0).95 (,95). (,0).5 (,70).50 (,35). (5,5). (,5).33 (7,95).5 (,70).30 (7,). (,).50 (,35).5 (,).5 (,).30 (7,).50 (,35).5 (,5).307 (7,0).7 (,75).50 (,35) 57 (,53).3 (,7).30 (7,7).5 (,).7 (,75).50 (,35).5 (3,). (,5).99 (5,05).5 (,70).50 (,35).50 (,35).0 (,0).50 (,35).7 (,3).5 (,9).0 (3,5).33 (3,3). (,).75 (,5). (3,5).70 (,3).73 (,39).7 (,3).7 (,3).3 (5,99).95 (,95).73 (,39).7 (5,77).0 (5,0). (,9).7 (,3).9 (,).0 (5,59).3 (3,5).50 (3,).0 (3,5).9 (,9).0 (3,5).7 (,). (,7).0 (3,5).9 (,9). (3,5).7 (,3).0 (3,5).5 (3,).9 (,9).7 (,3).9 (,9).55 (,).7 (3,73).7 (,3).93 (,90).99 (5,05).00 (5,0).55 (3,9).093 (,3).9 (,9).5 (,9).5 (,70).0 (3,5).0 (3,5).0 (3,5).97 (5,00).5 (3,).3 (3,5) IV NYLON SHOULDE WASHES AE SUIT- ABLE O A LAGE VAIETY O INSULA- TION AND CHANICAL APPLICATIONS. THEY SEAL EDUCE VIBATION ACT AS SPACES AND GUIDES STONG AND COOSION ESISTANT mpsales@microplastics.com micro plastics, inc. WEBSITE: 59

60 PEVIOUS PAGE O CON TEN TS IN DEX A-Z WASHES, SHOULDE WASHES AND SCEW INSULATOS IV NYLON SHOULDE WASHES AE SUIT- ABLE O A LAGE VAIETY O INSULA- TION AND CHANICAL APPLICATIONS. THEY SEAL EDUCE VIBATION ACT AS SPACES AND GUIDES STONG AND COOSION ESISTANT NYLON SHOULDE WASHES ITEM NUMBE DESCIPTION L A B C D SWS05 SWS 5 3/3 (,3).375 (9,53) / (,59). (,30).3 (3,5) SWS05 SWS 5 3/ (,9).375 (9,53) / (,59).0 (,0).9 (,93) SWS055 SWS 55 7/ (,77).375 (9,53) / (,59).0 (,0).3 (3,5) SWS05 SWS 5 3/3 (,3).375 (9,53) / (0,).5 (,70).0 (3,5) SWS057 SWS 57 5/3 (3,97).375 (9,53) 5/ (,9).93 (,90). (,95) SWS05 SWS 5 / (,59).375 (9,53) / (,59).50 (,35).5 (3,) SWS059 SWS 59 9/ (3,5).375 (9,53) /3 (0,79).5 (,).7 (,75) SWS00 SWS 0 3/ (5,).30 (9,5) / (,59).0 (5,59). (3,7) SWS0 SWS / (3,).37 (9,0) /3 (0,79).55 (,). (,9) SWS0 SWS 3/ (,7).390 (9,9) 5/ (,9).7 (7,9).9 (,9) SWS03 SWS 3 5/ (,9).390 (9,9) 5/ (,9).33 (7,95).03 (5,) SWS0 SWS 7/ (,77).395 (0,03) 5/ (,9).99 (7,59).30 (5,) SWS05 SWS (,).30 (9,5).05 (,5).5 (,5).9 (,9) SWS07 SWS 7.0 (,7).375 (9,53).00 (,0). (5,). (3,5) SWS0 SWS.03 (0,79).375 (9,53).0 (,57).3 (7,9).53 (,3) SWS09 SWS 9.07 (5,).390 (9,9).0 (,57).3 (,).3 (7,9) SWS070 SWS 70 / (3,).33 (0,99) / (,59).3 (7,9).99 (5,05) SWS07 SWS 7.30 (3,30).390 (9,9).0 (,57).0 (,0).00 (5,0) SWS07 SWS 7.0 (,0) 7/(0,7).050 (,7) 9/3 (7,5).00 (5,0) SWS073 SWS 73. (3,0).39 (0,0).039 (0,99). (,50). (5,) SWS07 SWS 7.39 (3,53).390 (9,9).05 (0,3).303 (7,70).3 (5,) SWS075 SWS (7,).375 (9,53).050 (,7).53 (,3).5 (3,) SWS07 SWS (,9).390 (9,9).0 (,57).0 (,0).00 (5,0) SWS00 SWS 0 / (3,).00 (0,) / (3,).75 (,99).0 (3,5) SWS0 SWS 9/3 (7,).70 (,93) 5/ (,9).3 (7,9).0 (3,5) SWS05 SWS 5.00 (,5).00 (0,) / (3,).75 (,99).0 (3,5) SWS07 SWS 7.7 (,75).0 (0,3).0 (,57).0 (,0).97 (5,00) SWS0 SWS 3/ (,9).00 (0,) 3/ (,9).3 (,7).5 (3,9) SWS090 SWS 90 3/ (,9).5 (0,5) 5/3 (3,97).3 (,7). (3,5) SWS09 SWS 9.05 (,7).5 (,30).077 (,9).33 (,7).30 (7,) SWS09 SWS 9 / (,59). (0,) 7/ (,77).3 (,7). (3,5) SWS09 SWS 9 3/ (,7).0 (0,3) / (,59).0 (,0).0 (5,59) SWS097 SWS (,00).33 (,00).079 (,0).30 (7,7).0 (5,3) SWS0900 SWS 900 /3 (0,79). (0,7) / (,59).5 (,).5 (3,9) SWS090 SWS (,3).37 (,0).00 (,0).375 (9,53).9 (,93) SWS090 SWS 90 /3 (0,79).37 (,0) / (,59).5 (,).5 (3,9) SWS0903 SWS (,9).3 (0,97).05 (,5). (,50).9 (,9) SWS090 SWS 90 (9,53).37 (,0) / (,59). (7,).5 (5,7) SWS0905 SWS 905 / (,59).5 (0,7) / (,59).30 (7,7).50 (,35) SWS090 SWS (0,9).5 (5,7).050 (,7).7 (0,).70 (,3) SWS0907 SWS (0,).3 (,3).09 (,39).307 (7,0).53 (,3) SWS090 SWS 90 3/3 (,3).3 (,3) /3 (0,79).7 (,7).03 (5,) SWS0909 SWS 909 3/3 (0,3).93 (,5) 3/3 (,3).37 (9,55).7 (,7) SWS090 SWS (,7).3 (,5).0 (,).5 (7,).9 (,5) SWS09 SWS 9 9/ (3,5).3 (0,97) /3 (0,79).303 (7,70).9 (,9) SWS09 SWS 9.03 (,09). (,).09 (,39).3 (7,9).93 (,90) SWS095 SWS 95.3 (3,5).3 (0,9).35 (,00). (,0).7 (5,5) 0 TELEPHONE: (70) 53- / 53- micro plastics, inc. AX: (70) 53-7

61 PEVIOUS PAGE O CON TEN TS IN DEX A-Z WASHES, SHOULDE WASHES AND SCEW INSULATOS IV NYLON SHOULDE WASHES ITEM NUMBE DESCIPTION L A B C D SWS09 SWS 9 3/ (,7).73 (,7) / (,59).37 (,0).37 (9,55) SWS097 SWS 97 3/ (,9). (0,7) / (3,).350 (,9).30 (7,) SWS09 SWS 9 3/ (,9).50 (,3) / (0,).30 (7,7).30 (5,) SWS099 SWS (,5).0 (,).030 (0,7).370 (9,0).0 (,0) SWS090 SWS 90.3 (3,5).3 (,7). (3,00). (,0).7 (5,5) SWS09 SWS 9.3 (5,99).0 (,9).079 (,0).35 (,00).0 (,0) SWS095 SWS 95 3/ (,9). (,9) / (,59). (,30).0 (3,5) SWS09 SWS 9 / (7,53).9 (,) / (,59).375 (9,53).5 (,5) SWS0930 SWS 930 7/3 (5,55). (,9) 3/ (,9).375 (9,53).35 (,) SWS0935 SWS (,75).95 (,57).05 (,5).3 (7,9).00 (5,0) SWS090 SWS (3,99).3 (,7).059 (,50).35 (,00).0 (,0) SWS0950 SWS (3,99).7 (,99). (,0).35 (,00).05 (5,) SWS00 SWS 00 (9,53).399 (0,3) / (,59).0 (,0).00 (5,0) SWS00 SWS 00 3/3 (,3).3 (,3) / (,59).7 (,7).03 (5,) SWS003 SWS 003 3/ (,7).75 (,9) /3 (0,79). (7,).3 (5,9) SWS00 SWS 00 9/ (3,5).3 (,3) /3 (0,79).50 (,35).35 (3,3) SWS005 SWS 005 5/ (,9). (,79) / (0,).3 (7,9).55 (,) SWS00 SWS 00 / (,37).5 (0,0) / (,59).377 (9,5).0 (,0) SWS007 SWS 007 3/ (,9).37 (,0) 3/ (,9). (7,).0 (5,) SWS00 SWS 00 3/ (,9).0 (5,75) 3/ (,9).3 (7,9).05 (5,) SWS009 SWS 009 / (,59).70 (,0) /3 (0,79).3 (9,53).30 (,3) SWS00 SWS 00 3/ (,9).5 (5,) 7/ (,77).375 (9,53).50 (,35) SWS0 SWS 0 / (,59).75 (7,) 3/3 (,3).0 (,9).57 (,53) SWS0 SWS 0 / (3,).97 (7,70) / (,59).359 (9,). (,7) SWS03 SWS 03 3/ (,9). (7,) /3 (0,79).53 (3,79).50 (,90) SWS0 SWS 0 /3 (0,79).37 (,0) /3 (0,79).30 (7,7).53 (,3) SWS05 SWS 05 3/ (,9).500 (,70) 3/3 (,3).75 (,99).5 ( 3,) SWS0 SWS 0 7/ (,).500 (,70) / (3,).50 (,35).7 (,) SWS07 SWS 07 / (,59).5 (,7) 3/3 (,3).375 (9,53).0 (,0) SWS0 SWS 0 3/ (,7).5 (5,) / (,59).3 (,).55 (,) SWS09 SWS 09 3/ (,9).5 (5,) /3 (0,79).30 (7,7).53 (,3) SWS00 SWS 00 / (,59).0 (,) / (,59).30 (9,5).95 (,95) SWS0 SWS 0 3/ (,9).30 (,00) /3 (0,79). (,30).7 (,3) SWS0 SWS 0 3/ (,9).5 (5,) / (,59).375 (9,53).90 (,3) SWS03 SWS 03 3/ (,9).555 (,0) 5/ (,9).300 (7,).0 (,0) SWS05 SWS 05 7/ (,).5 (,7) / (,59).375 (9,53).55 (,) SWS0 SWS 0 /3 (0,79).5 (,93) /3 (0,79).53 (,3).9 (5,0) SWS07 SWS 07 / (,70).500 (,70) / (,59) 35 (9,7).3 (7,9) SWS0 SWS 0.9 (,3).500 (,70).0 (,57).50 (,35).9 (,0) SWS09 SWS 09.5 (,0).500 (,70).0 (3,05).300 (7,).9 (,9) SWS030 SWS 030 3/3 (,3).90 (,5) / (,59). (7,).00 (5,0) SWS03 SWS (,7).500 (,70).0 (,57). (,30).9 (,93) SWS SWS /3 (0,79).500 (,70) 3/3 (,3).50 (,35).5 (3,9) SWS033 SWS 033 5/ (7,9).500 (,70) / (,59).3 (7,9).00 (5,0) SWS03 SWS 03 /3 (0,79).500 (,70) /3 (0,79).3 (7,9).5 (,0) SWS035 SWS 035 /3 (0,79).500 (,70) / (,59).30 (5,).7 (3,73) SWS03 SWS 03 / (0,).500 (,70) 5/ (,9).50 (,35).5 (,9) NYLON SHOULDE WASHES AE SUIT- ABLE O A LAGE VAIETY O INSULA- TION AND CHANICAL APPLICATIONS. THEY SEAL EDUCE VIBATION ACT AS SPACES AND GUIDES STONG AND COOSION ESISTANT mpsales@microplastics.com micro plastics, inc. WEBSITE:

62 PEVIOUS PAGE O CON TEN TS IN DEX A-Z WASHES, SHOULDE WASHES AND SCEW INSULATOS IV NYLON SHOULDE WASHES AE SUIT- ABLE O A LAGE VAIETY O INSULA- TION AND CHANICAL APPLICATIONS. THEY SEAL EDUCE VIBATION ACT AS SPACES AND GUIDES STONG AND COOSION ESISTANT NYLON SHOULDE WASHES ITEM NUMBE DESCIPTION L A B C D SWS037 SWS (,9).500 (,70).5 (3,7). (7,).9 (5,5) SWS03 SWS (5,0).75 (,3).0 (,57).500 (,70).390 (9,9) SWS00 SWS 00 3/3 (,3).505 (,3) / (,59.33 (,7).57 (,53) SWS0 SWS (,5).95 (,57).050 (,7).3 (,79).0 (,0) SWS0 SWS 0.07 (0,9).500 (,70).03 (0,79). (,30).99 (5,05) SWS05 SWS 05 3/ (,7).9 (,5) (,35).30 (7,7).95 (,95) SWS0 SWS 0 7/ (,).500 (,70) / (,59).375 (9,53).50 (,35) SWS050 SWS 050 5/3 (3,97).90 (,5) / (,59).50 (,35).90 (,3) SWS05 SWS 05 3/ (,9). (,0) / (,59). (,30).9 (,9) SWS05 SWS 05 5/3 (3,97). (,39) / (3,).50 (,35).90 (,3) SWS053 SWS (,3).500 (,70).5 (3,7).375 (9,5).57 (,53) SWS05 SWS 05 9/ (3,5).500 (,70) / (,59).35 (,7).5 (7,3) SWS055 SWS 055 /3 (0,79).95 (,57) /3 (0,79).3 (7,9).0 (,0) SWS057 SWS 057 3/3 (,3).500 (,70) / (,59).3 (7,9).0 (,0) SWS05 SWS 05 /3 (0,79).90 (,5) /3 (0,79).30 (7,7).93 (,90) SWS059 SWS (,5).500 (,70).030 (0,7).35 (9,7).0 (,0) SWS00 SWS 00 5/ (,9).9 (,50) /3 (0,79).3 (,0).5 (,73) SWS0 SWS 0 5/3 (3,97). (,39) / (3,).50 (,35).5 (5,) SWS05 SWS 05 3/ (,7).53 (3,03) / (,59).3 (7,9).75 (,5) SWS070 SWS 070 5/ (,9).95 (,57) /3 (0,79.3 (,0).93 (,90) SWS07 SWS (,3).50 (,75).7 (,75).37 (9,50).3 (,0) SWS075 SWS 075 (,35).53 (3,03) / (,59).370 (9,0).0 (,0) SWS00 SWS 00 / (0,).500 (,70) /3 (0,79).3 (,0). (3,5) SWS0 SWS 0 3/ (,9).500 (,70) /3 (0,79).3 (,0).93 (,90) SWS0 SWS 0 3/ (,9).500 (,70) /3 (0,79).3 (,0). (3,5) SWS0 SWS 0 / (,59).500 (,70) / (,59).330 (,3).50 (3,) SWS0 SWS 0.09 (,77).500 (,70) / (,59).0 (,0).3 (3,5) SWS090 SWS 090 3/ (,9).5 (3,) /3 (0,79).305 (7,75).00 (,03) SWS09 SWS (,9).500 (,70).75 (,5).300 (7,).95 (,95) SWS095 SWS 095 / (3,).50 (,75) /3 (0,79).399 (0,3).39 (,) SWS09 SWS 09 9/ (3,5).55 (3,0) / (,59).3 (7,93).0 (,0) SWS0 SWS 0 3/3 (,3).500 (,70) /3 (0,79). (7,).3 (5,9) SWS5 SWS (,70).55 (5,).03 (,0).370 (9,0).7 (,7) SWS5 SWS (0,7).5 (,).030 (0,7).00 (0,).3 (,0) SWS50 SWS 50 3/ (,9).5 (,) 3/ (,9).300 (7,).0 (,0) SWS5 SWS 5.0 (,).5 (,).0 (,7).300 (7,).0 (,0) SWS5 SWS (,70).55 (3,33).03 (,0).370 (9,0).5 (,73) SWS55 SWS 55 3/ (,9).5 (,).0 (0,.370 (9,0).335 (,5) SWS59 SWS 59 9/ (,9).550 (3,97) / (,59).375 (9,53).55 (,) SWS0 SWS 0 / (,59).5 (,) 7/ (,77).35 (9,7).5 (5,) SWS SWS 7/ (0,7).50 (,) / (,59).375 (9,53).55 (,) SWS3 SWS 3 5/3 (,9).550 (3,97) / (,59).30 (9,5).7 (,7) SWS SWS /3 (0,79).5 (,) / (3,).3 (7,93).9 (,9) TELEPHONE: (70) 53- / 53- micro plastics, inc. AX: (70) 53-7

63 PEVIOUS PAGE O CON TEN TS IN DEX A-Z WASHES, SHOULDE WASHES AND SCEW INSULATOS IV NYLON SHOULDE WASHES ITEM NUMBE DESCIPTION L A B C D SWS5 SWS 5 (,35).55 (3,99) / (,59).30 (9,5). (,30) SWS70 SWS 70 (9,53).570 (,) / (,59).70 (,9).35 (9,7) SWS75 SWS (9,9).570 (,).039 (0,99).9 (,7).3 (0,9) SWS7 SWS (,5).55 (3,).075 (,9).3 (,03). (,) SWS0 SWS 0 3/ (,9).57 (,) / (,59).5 (,70).0 (3,5) SWS00 SWS 00 3/ (,9).5 (5,) 3/ (,9).35 (,00).0 (5,) SWS0 SWS 0 / (3,).0 (5,75) (9,53).30 (9,).30 (,3) SWS0 SWS (,70).00 (5,).05 (0,).5 (,3).3 (,3) SWS05 SWS 05 /3 (0,79).0 (5,75) 3/ (,9).3 (,0).33 (9,73) SWS0 SWS 0 /3 (0,79).5 (5,) / (,59).05 (0,9).37 (9,0) SWS SWS.39 (3,53).5 (5,).0 (,).05 (0,9).30 (,3) SWS SWS.05 (0,).5 (5,).0 (,57).375 (9,53).00 (5,0) SWS5 SWS 5.0 (,57).5 (5,) /3 (0,79).30 (7,7).95 (,95) SWS7 SWS (0,7).5 (5,).030 (0,7).7 (,).37 (9,0) SWS9 SWS 9 3/ (,9).5 (5,) / (,59).30 (7,7).7 (,37) SWS0 SWS 0 (9,05).0 (5,75) / (3,).00 (0,0).0 (,0) SWS SWS / (3,).30 (,00) / (,59).37 (,3).0 (,0) SWS SWS /3 (0,79).5 (5,) /3 (0,79). (,37).37 (9,0) SWS5 SWS 5.07 (0,9).5 (5,).0 (,57). (,30).0 (3,05) SWS7 SWS 7.0 (5,33).5 (5,).05 (,7).379 (9,3).3 (,) SWS SWS.05 (0,).5 (5,).00 (,5).9 (5,5).0 (3,5) SWS30 SWS 30 3/ (,9).550 (3,97) 5/ (,9).305 (7.75).0 (,0) SWS3 SWS 3 / (,70).0 (5,75) / (,59).370 (9.0).3 (,03) SWS33 SWS (,9).5 (5,).0 (,57).3 (7,90).53 (,3) SWS35 SWS (3,).0 (5,75).00 (,5).50 (,75).3 (,03) SWS0 SWS 0 3/ (,7).30 (,00) / (,59).375 (9,53).5 (,5) SWS SWS.75 (,5).50 (,5).5 (3,).90 (,5).35 (9,7) SWS99 SWS 99 (9,53).53 (3,03) / (,59).3 (7,93).9 (,5) SWS50 SWS 50 (9,53).53 (3,03) / (,59).3 (7,93). (,3) SWS50 SWS 50 / (3,).7 (,) 3/ (,9).3 (7,93).55 (,) SWS503 SWS 503 /3 (0,79).5 (5,) / (,59).375 (9,53).95 (7,9) SWS50 SWS 50 / (3,).7 (7,5) / (3,).37 (,0).3 (,33) SWS505 SWS 505 /3 (0,79).500 (,70) / (,59).3 (7,93).5 (,0) SWS50 SWS 50 5/ (7,9).5 (5,) / (,59).500 (,70).30 (9,5) SWS507 SWS 507 / (3,).00 (5,) / (3,).370 (7,93).50 (,35) SWS50 SWS 50 3/ (,7).7 (7,) 3/3 (,3).500 (,70).90 (7,3) SWS509 SWS 509-7/ (,7).35 (,3) 9/ (3,5).5 (0,0).0 (5,) SWS50 SWS 50 (9,53).7 (7,5) (9,53).359 (9,).3 (,) SWS5 SWS 5 5/ (7,9).5 (5,) / (,59).500 (,70).395 (0,03) SWS5 SWS 5.33 (,).7 (7,5).0 (,7).3 (,).3 (,) SWS53 SWS 53 / (3,).703 (7,) / (,59).37 (,0).335 (,5) SWS55 SWS 55.0 (0,7).70 (,03).075 (,90).70 (,9).0 (0,7) SWS55 SWS.0 (7,).70 (7,0).0 (,57).305 (7,75).5 (,55) NYLON SHOULDE WASHES AE SUIT- ABLE O A LAGE VAIETY O INSULA- TION AND CHANICAL APPLICATIONS. THEY SEAL EDUCE VIBATION ACT AS SPACES AND GUIDES STONG AND COOSION ESISTANT mpsales@microplastics.com micro plastics, inc. WEBSITE: 3

64 PEVIOUS PAGE O CON TEN TS IN DEX A-Z WASHES, SHOULDE WASHES AND SCEW INSULATOS IV NYLON SHOULDE WASHES AE SUIT- ABLE O A LAGE VAIETY O INSULA- TION AND CHANICAL APPLICATIONS. THEY SEAL EDUCE VIBATION ACT AS SPACES AND GUIDES STONG AND COOSION ESISTANT NYLON SHOULDE WASHES ITEM NUMBE DESCIPTION L A B C D SWS57 SWS50 SWS5 SWS55 SWS5 SWS53 SWS53 SWS533 SWS53 SWS539 SWS50 SWS5 SWS5 SWS53 SWS5 SWS55 SWS5 SWS57 SWS5 SWS550 SWS55 SWS55 SWS553 SWS55 SWS555 SWS55 SWS557 SWS55 SWS0 SWS SWS SWS3 SWS SWS SWS SWS570 SWS57 SWS575 SWS57 SWS57 SWS50 SWS55 SWS5 SWS590 SWS300 SWS300 SWS3003 SWS 57 SWS 50 SWS 5 SWS 55 SWS 5 SWS 53 SWS 53 SWS 533 SWS 53 SWS 539 SWS 50 SWS 5 SWS 5 SWS 53 SWS 5 SWS 55 SWS 5 SWS 57 SWS 5 SWS 550 SWS 55 SWS 55 SWS 553 SWS 55 SWS 555 SWS 55 SWS 557 SWS 55 SWS 0 SWS SWS SWS 3 SWS SWS SWS SWS 570 SWS 57 SWS 575 SWS 57 SWS 57 SWS 50 SWS 55 SWS 5 SWS 590 SWS 300 SWS 300 SWS (,79) 5/3 (3,97) 5/3 (3,97) /3 (3,3) 3/ (,7) 5/ (7,9).55 (3,9).375 (9,5).7 (,75) /3 (,73) / (3,) 5/ (,9) 3/ (,9).77 (9,5).00 (5,0).00 (,5).5 (3,).50 (,35).5 (0,0) / (,59) 3/ (,9) 7/ (,77) 5/ (7,9) 3/ (,9).09 (,9) 3/ (,7) 3/ (0,00) / (3,) 3/ (,9) 7/ (0,7) (3,3) 3/3 (,9) (,35) 5/3 (,90) 3/ (,9) / (7,).30 (,3) 5/ (0,) /3 (0,7) 3/ (,7) 5/ (7,9) (,35) (,35).0 (0,) / (3,) 3/ (,9) 7/3 (5,55).70 (,03).75 (,).70 (,9).730 (,5).73 (,7).73 (,7).75 (,9) (9,05).75 (,9).70 (,0).70 (,0).750 (9,05).750 (9,05).75 (9,05).75 (9,05).750 (9,05).750 (9,05).750 (9,05).750 (9,05).73 (,).753 (9,).73 (,7).750 (9,05).735 (,7).77 (,7).750 (9,05).7 (,99).750 (9,05).750 (9,05).750 (9,05).755 (9,7).750 (9,05).750 (9,05).70 (,0).750 (9,05).70 (,0).750 (9,05).750 (9,0).750 (9,05).750 (9,0).75 (,9).70 (,0).750 (9,05).75 (,9).93 (7,0).750 (9,05).750 (9,05).90 (,3) 5/3 (3,97) / (,59) (,35) / (,59) 5/ (,9).00 (,5).375 (9,5).03 (0,79) 3/3 (,3) 3/3 (,3) 3/3 (,3) 3/ (,7).095 (,).095 (,).0 (,).7 (,75).0 (,57) / (,59) / (3,) 5/ (,9) 3/3 (,3) 5/ (,9) 3/ (,7).079 (,0) / (,59) / (3,) / (,59) /3 (0,79) / (,37) 5/ (,9) / (3,) / (,59) 5/3 (3,97) /3 (0,79) 9/ (3,5).030 (0,7) 3/3 (,3) /3 (0,79) / (,59) /3 (0,79) / (,70) / (3,).05 (,) / (,59) 3/ (,9) 3/3 (,3).33 (,59).5 (,30).5 (,3).375 (9,53).3 (,5).50 (,75).55 (3,).59 (5,09). (7,).375 (9,53).37 (9,).30 (9,5).500 (,70).90 (,5).375 (9,53).500 (,70).500 (,70).7 (5,7).590 (,99). (,0).09 (0,3).500 (,70).500 (,70).90 (,5). (,).500 (,70).50 (,0).500 (,70).37 (9,).3 (,0).505 (,3).375 (9,53).50 (,35).375 (9,53).3 (,).35 (9,7).50 (,73).35 (,0).500 (,70).5 (5,).50 (,).05 (5,37).500 (,70).305 (7,75).37 (,0).375 (9,53).30 (9,5).55 (,).375 (9,53).70 (,).57 (,5).375 (9,53).33 (9,7).39 (9,93).30 (9,5).3 (5,9). (,7). (,7). (,7).30 (0,9).9 (,3).5 (,73).50 (,35).3 (,7).509 (,93).375 (9,53).50 (,35).5 (,55).375 (9,53).370 (9,39).35 (,05).35 (9,09).375 (9,53).3 (9,75).375 (9,53).53 (,3).3 (7,93).37 (9,0).5 (,73).50 (3,).50 (,35).53 (,3).0 (,0).57 (3,3).90 (,3).9 (5,5).50 (,95).500 (,70).30 (9,5). (7,).00 (5,0).3 (,33).33 (,0). (,7) TELEPHONE: (70) 53- / 53- micro plastics, inc. AX: (70) 53-7

65 PEVIOUS PAGE O CON TEN TS IN DEX A-Z WASHES, SHOULDE WASHES AND SCEW INSULATOS IV NYLON SHOULDE WASHES ITEM NUMBE DESCIPTION L A B C D SWS300 SWS3005 SWS300 SWS3007 SWS300 SWS3009 SWS300 SWS30 SWS305 SWS30 SWS307 SWS300 SWS30 SWS30 SWS3030 SWS300 SWS30 SWS30 SWS303 SWS350 SWS35 SWS355 SWS30 SWS35 SWS300 SWS305 SWS30 SWS3500 SWS350 SWS350 SWS3503 SWS350 SWS3507 SWS350 SWS35 SWS35 SWS353 SWS350 SWS35 SWS350 SWS300 SWS30 SWS30 SWS303 SWS30 SWS305 SWS30 SWS 300 SWS 3005 SWS 300 SWS 3007 SWS 300 SWS 3009 SWS 300 SWS 30 SWS 305 SWS 30 SWS 307 SWS 300 SWS 30 SWS 30 SWS 3030 SWS 300 SWS 30 SWS 30 SWS 303 SWS 350 SWS 35 SWS 355 SWS 30 SWS 35 SWS 300 SWS 305 SWS 30 SWS 3500 SWS 350 SWS 350 SWS 3503 SWS 350 SWS 3507 SWS 350 SWS 35 SWS 35 SWS 353 SWS 350 SWS 35 SWS 350 SWS 300 SWS 30 SWS 30 SWS 303 SWS 30 SWS 305 SWS 30 / (,59) 5/3 (3,97) /3 (0,79) / (,59) / (,59) 3/ (,9).07 (0,).395 (0,03).005 (5,53).050 (,7) 5/3 (3,97).305 (7,75). (,). (,7).5 (,0).35 (,) /3 (0,79) / (,70) / (,70) (5,0) (9,53) (9,53) / (,70) (9,53) 3/ (,7) (5,) (5,0) 3/ (,7) 7/ (,77) 7/ (0,7) 3/ (,) 3/ (,).50 (,35) 3/3 (0,3) 3/ (5,).935 (3,75).50 (,35) 7/3 (3,9) (,35) 9/ (,9).0 (,7) 3/ (,7) /3 (0,79).050 (,7).3 (,7) 5/ (7,9).33 (,3).750 (9,05).750 (9,05).750 (9,05).750 (9,05).75 (,9).70 (9,30).75 (,9).70 (,0).75 (9,0).75 (,).755 (9,).70 (,0).75 (,9).750 (9,05).70 (9,).5 (0,9).750 (9,05).5 (0,9).7 (,).75 (,3) 7/ (,).75 (,3).75 (,3).75 (,3).995 (5,7).995 (5,7).995 (5,7).750 (9,05).750 (9,05).790 (0,07).5 (5,).5 (5,).30 (,0).5 (0,9).0 (,35).7 (,5).75 (,).95 (,03).90 (,9).5 (3,75).00 (5,5).000 (5,0).000 (5,0).005 (5,53).00 (5,55).005 (5,53).00 (5,0) 3/3 (,3) /3 (0,79) / (3,) / (3,) /3 (0,79) 5/ (,9).03 (0,79).0 (,57).00 (,5) / (,59) / (,70).30 (3,30) / (,59).09 (,3).079 (,0).00 (,5) / (,59) / (,59) / (3,) / (,59) / (3,7) / (3,) / (,59) / (3,) / (3,) / (3,) / (3,) / (,59) 3/3 (,3) 3/ (,9) / (3,) / (3,).00 (,5) 3/3 (,3) 3/ (,9).0 (,79).5 (3,7) 5/ (,9) / (3,) 3/ (,9).0 (,0) (,35) 3/3 (,3).070 (,7).07 (,9) / (,59).0 (,0).359 (9,).9 (,).500 (,70).500 (,70).375 (9,53).0 (0,).30 (7,7).30 (0,9).505 (,3).55 (,).50 (,95).95 (,57).95 (,57).7 (5,93).39 (9,9).35 (,05).375 (9,53).0 (5,75).7 (5,7).500 (,70).33 (,0).30 (,00).750 (9,05).0 (5,75).79 (0,).77 (9,99).7 (0,0).9 (,).577 (,).5 (5,).375 (9,53).375 (9,53).5 (,).5 (,30).750 (9,05).97 (,).7 (5,7).70 (,93).55 (,).00 (5,0).00 (5,).35 (,05). (5,5).500 (,70).50 (,0).500 (,70).5 (5,7).5 (3,).37 (9,0).375 (9,53).375 (9,53).30 (,3).5 (,55).57 (,53).3 (,.30 (,3).55 (3,0).35 (9,7).9 (5,5).390 (9,9).50 (,5).50 (,35).30 (7,7).0 (,0).50 (3,).335 (,5).375 (9,53).50 (,95). (,).35 (,3).50 (,35).95 (7,5).95 (7,5).95 (7,5).37 (9,0).390 (9,9).550 (3,97).55 (,7).0 (,0).53 (,3).30 (7,77).7 (5,7).35 (9,7).335 (,5).0 (0,3).30 (9,5).559 (,0).0 (,0).35 (,).55 (3,0).53 (,5).37 (9,55).375 (9,53).55 (3.0) NYLON SHOULDE WASHES AE SUIT- ABLE O A LAGE VAIETY O INSULA- TION AND CHANICAL APPLICATIONS. THEY SEAL EDUCE VIBATION ACT AS SPACES AND GUIDES STONG AND COOSION ESISTANT mpsales@microplastics.com micro plastics, inc. WEBSITE: 5

66 PEVIOUS PAGE O CON TEN TS IN DEX A-Z WASHES, SHOULDE WASHES AND SCEW INSULATOS IV NYLON SHOULDE WASHES AE SUIT- ABLE O A LAGE VAIETY O INSULA- TION AND CHANICAL APPLICATIONS. THEY SEAL EDUCE VIBATION ACT AS SPACES AND GUIDES STONG AND COOSION ESISTANT NYLON SHOULDE WASHES ITEM NUMBE DESCIPTION L A B C D SWS307 SWS (3,3).0 (7,3).0 (,57).9 (,7).30 (,00) SWS30 SWS (,70).000 (5,0).5 (3,).7 (7,5).50 (,95) SWS309 SWS (3,05).000 (5,0).30 (3,30).75 (,9).5 (,3) SWS30 SWS 30 9/ (,9).000 (5,0) / (,59).500 (,70).3 (9,70) SWS35 SWS 35 (9,05).000 (5,0) / (3,).500 (,70).375 (9,53) SWS350 SWS 350 7/ (,77).000 (5,0) 5/ (,9).770 (9,5).50 (,90) SWS30 SWS 30 / (,59).000 (5,0) / (,59).9 (7,57).03 (5,) SWS35 SWS 35 / (,59).0 (7,0) / (,59).77 (9,99). (5,5) SWS3 SWS 3. (7,).05 (,07).09 (,3).7 (,).55 (3,0) SWS390 SWS 390 7/ (,).5 (,5) 3/3 (,3).700 (7,7).50 (,95) SWS39 SWS (,5).0 (9,). (3,5).95 (,57).377 (9,5) SWS00 SWS 00 3/3 (,3).5 (,5) / (,59).70 (,0).55 (3,0) SWS00 SWS 00 3/3 (,3).30 (3,) / (,59).90 (,9).50 (,95) SWS003 SWS 003 9/3 (7,).05 (,07) / (3,).75 (9,0).55 (3,0) SWS00 SWS 00 / (,70).5 (3,9) / (3,).75 (,3).7 (5,9) SWS005 SWS 005 3/3 (0,3).5 (3,0) / (,59).00 (5,).53 (3,) SWS00 SWS 00 3/3 (0,3).5 (3,77) / (,59).5 (3,).7 (,9) SWS007 SWS 007 3/ (5,).739 (,7) 3/ (5,).095 (7,).35 (,0) SWS00 SWS 00 /3 (,7).50 (3,75) 5/3 (3,97).995 (5,7).5 (,) SWS009 SWS 009 (9,05) / (,57) / (,59) 7/ (,) 5/ (7,9) SWS00 SWS 00 3/3 (,3).50 (3,75) / (,59).930 (3,).5 (,7) SWS0 SWS 0.09 (,39).50 (3,75).0 (,57).99 (5,).5 (,7) SWS0 SWS 0.00 (,5).50 (,9).00 (,5).30 (35,05).5 (,5) SWS03 SWS 03 (5,) - (,5) / (3,) - (3,93).05 (5,7) SWS0 SWS 0.3 (,0).50 (3,).33 (3,3). (3,70).9 (3,9) SWS500 SWS 500 / (,70).05 (5,5) / (3,).050 (,7).0 (0,) SWS5009 SWS / (7,03). (53,) / (3,).03 (5,3).70 (,5) NYLON STANDAD SHOULDE WASHES ITEM NUMBE DESCIPTION A B C D L SW000 SW000 SW000 SW000 SW000 SW050 SW0375 SW SW SW SW SW 0 SW SW.093 (,3). (3,09). (3,7).7 (,).0 (5,).0 (,0).35 (9,7).50 (,35). (7,).3 (,33).375 (9,53).37 (,0).5 (,7).750 (9,05).00 (,0).00 (,0).00 (,0).050 (,7).050 (,7).00 (,5).00 (,5).5 (3,9).7 (,75). (5,5).50 (,35). (7,).375 (9,53).500 (,70).00 (,0).00 (,0).00 (,0).050 (,7).050 (,7).00 (,5).00 (,5) TELEPHONE: (70) 53- / 53- micro plastics, inc. AX: (70) 53-7

67 PEVIOUS PAGE O CON TEN TS SPACES IN DEX A-Z Similar to our standard spacers, but with a specially configured ID designed to grip the screw shank. The spacer remains attached to the screw, for quick, easy assembly. ITEM NUMBE A B D L 3SPT03 (,35).5 (,9).07 (,9) / (3,) 3SPT03 (,35).5 (,9).07 (,9) 3/ (,7) 3SPT033 (,35).5 (,9).07 (,9) (,35) 3SPT03 (,35).5 (,9).07 (,9) 5/ (7,9) 3SPT035 (,35).5 (,9).07 (,9) (9,53) 3SPT03 (,35).5 (,9).07 (,9) 7/ (,) 3SPT037 (,35).5 (,9).07 (,9) / (,70) 3SPT03 (,35).5 (,9).07 (,9) 9/ (,9) 3SPT039 (,35).5 (,9).07 (,9) (5,) 3SPT00 (,35).5 (,9).07 (,9) / (7,) 3SPT0 (,35).5 (,9).07 (,9) (9,05) 3SPT0 (,35).5 (,9).07 (,9) 3/ (0,) 3SPT03 (,35).5 (,9).07 (,9) 7/ (,3) 3SPT0 (,35).5 (,9).07 (,9) 5/ (3,) 3SPT05 (,35).5 (,9).07 (,9) (5,0) 3SPT0 (,35).5 (3,9).0 (,59) / (3,) 3SPT07 (,35).5 (3,9).0 (,59) 3/ (,7) 3SPT0 (,35).5 (3,9).0 (,59) (,35) 3SPT09 (,35).5 (3,9).0 (,59) 5/ (7,9) 3SPT050 (,35).5 (3,9).0 (,59) (9,53) 3SPT05 (,35).5 (3,9).0 (,59) 7/ (,) 3SPT05 (,35).5 (3,9).0 (,59) / (,70) 3SPT053 (,35).5 (3,9).0 (,59) 9/ (,9) 3SPT05 (,35).5 (3,9).0 (,59) (5,) 3SPT055 (,35).5 (3,9).0 (,59) / (7,) 3SPT05 (,35).5 (3,9).0 (,59) (9,05) 3SPT057 (,35).5 (3,9).0 (,59) 3/ (0,) 3SPT05 (,35).5 (3,9).0 (,59) 7/ (,3) 3SPT059 (,35).5 (3,9).0 (,59) 5/ (3,) 3SPT00 (,35).5 (3,9).0 (,59) (5,0) 3SPT0 5/ (7,9).9 (5,03). (3,5) / (3,) 3SPT0 5/ (7,9).9 (5,03). (3,5) 3/ (,7) 3SPT03 5/ (7,9).9 (5,03). (3,5) (,35) 3SPT0 5/ (7,9).9 (5,03). (3,5) 5/ (7,9) 3SPT05 5/ (7,9).9 (5,03). (3,5) (9,53) 3SPT0 5/ (7,9).9 (5,03). (3,5) 7/ (,) 3SPT07 5/ (7,9).9 (5,03). (3,5) / (,70) NYLON ETAINING SPACES V ITEM NUMBE A B D L 3SPT0 5/ (7,9).9 (5,03). (3,5) 9/ (,9) 3SPT09 5/ (7,9).9 (5,03). (3,5) (5,) 3SPT070 5/ (7,9).9 (5,03). (3,5) / (7,) 3SPT07 5/ (7,9).9 (5,03). (3,5) (9,05) 3SPT07 5/ (7,9).9 (5,03). (3,5) 3/ (0,) 3SPT073 5/ (7,9).9 (5,03). (3,5) 7/ (,3) 3SPT07 5/ (7,9).9 (5,03). (3,5) 5/ (3,) 3SPT075 5/ (7,9).9 (5,03). (3,5) (5,0) 3SPT07 (9,53).0 (,0).5 (3,) / (3,) 3SPT077 (9,53).0 (,0).5 (3,) 3/ (,7) 3SPT07 (9,53).0 (,0).5 (3,) (,35) 3SPT079 (9,53).0 (,0).5 (3,) 5/ (7,9) 3SPT00 (9,53).0 (,0).5 (3,) (9,53) 3SPT0 (9,53).0 (,0).5 (3,) 7/ (,) 3SPT0 (9,53).0 (,0).5 (3,) / (,70) 3SPT03 (9,53).0 (,0).5 (3,) 9/ (,9) 3SPT0 (9,53).0 (,0).5 (3,) (5,) 3SPT05 (9,53).0 (,0).5 (3,) / (7,) 3SPT0 (9,53).0 (,0).5 (3,) (9,05) 3SPT07 (9,53).0 (,0).5 (3,) 3/ (0,) 3SPT0 (9,53).0 (,0).5 (3,) 7/ (,3) 3SPT09 (9,53).0 (,0).5 (3,) 5/ (3,) 3SPT090 (9,53).0 (,0).5 (3,) (5,0) 3SPT09 / (,70).77 (7,0).77 (,50) / (3,) 3SPT09 / (,70).77 (7,0).77 (,50) 3/ (,7) 3SPT093 / (,70).77 (7,0).77 (,50) (,35) 3SPT09 / (,70).77 (7,0).77 (,50) 5/ (7,9) 3SPT095 / (,70).77 (7,0).77 (,50) (9,53) 3SPT09 / (,70).77 (7,0).77 (,50) 7/ (,) 3SPT097 / (,70).77 (7,0).77 (,50) / (,70) 3SPT09 / (,70).77 (7,0).77 (,50) 9/ (,9) 3SPT099 / (,70).77 (7,0).77 (,50) (5,) 3SPT00 / (,70).77 (7,0).77 (,50) / (7,) 3SPT0 / (,70).77 (7,0).77 (,50) (9,05) 3SPT0 / (,70).77 (7,0).77 (,50) 3/ (0,) 3SPT03 / (,70).77 (7,0).77 (,50) 7/ (,3) 3SPT0 / (,70).77 (7,0).77 (,50) 5/ (3,) 3SPT05 /(,70).77 (7,0).77 (,50) (5,0) 3SPT0 / (,70).375 (9,53).3 (5,9) / (3,) 3SPT07 / (,70).375 (9,53).3 (5,9) 3/ (,7) 3SPT0 / (,70).375 (9,53).3 (5,9) (,35) 3SPT09 / (,70).375 (9,53).3 (5,9) 5/ (7,9) 3SPT0 / (,70).375 (9,53).3 (5,9) (9,53) 3SPT / (,70).375 (9,53).3 (5,9) 7/ (,) 3SPT / (,70).375 (9,53).3 (5,9) / (,70) 3SPT3 / (,70).375 (9,53).3 (5,9) 9/ (,9) 3SPT / (,70).375 (9,53).3 (5,9) (5,) 3SPT5 / (,70).375 (9,53).3 (5,9) / (7,) 3SPT / (,70).375 (9,53).3 (5,9) (9,05) 3SPT7 / (,70).375 (9,53).3 (5,9) 3/ (0,) 3SPT / (,70).375 (9,53).3 (5,9) 7/ (,3) 3SPT9 / (,70).375 (9,53).3 (5,9) 5/ (3,) 3SPT0 / (,70).375 (9,53).3 (5,9) (5,0) mpsales@microplastics.com micro plastics, inc. WEBSITE: 7

68 PEVIOUS PAGE O CON TEN TS SPACES IN DEX A-Z V STANDAD NYLON SPACES ITEM NUMBE DESCIPTION A B L SCEW 3SP000 SP 0 / (3,).03 (,0) 3/ (,7) 3SP00 3SP00 3SP003 3SP00 3SP005 3SP00 3SP007 3SP00 3SP009 3SP00 3SP0 3SP0 3SP03 3SP0 3SP05 3SP0 3SP07 3SP0 3SP09 3SP00 3SP0 3SP0 3SP03 3SP0 3SP05 3SP0 3SP07 3SP0 3SP09 3SP030 3SP03 3SP03 ALL STANDAD NYLON SPACES CAN BE TAPPED TWO THEAD SIZES LAGE THAN THE SCEW SIZE LISTED. O EXAM PLE: 3SP03 WITH A SCEW SIZE O CAN BE TAPPED THEAD. SP SP SP 3 SP SP 5 SP SP 7 SP SP 9 SP 0 SP SP SP 3 SP SP 5 SP SP 7 SP SP 9 SP 0 SP SP SP 3 SP SP 5 SP SP 7 SP SP 9 SP 30 SP 3 SP 3 3/ (,7) 3/ (,7) 3/ (,7) 3/ (,7) 3/ (,7) 3/ (,7) 3/ (,7) 3/ (,7) 3/ (,7) 3/ (,7) 3/ (,7) 3/ (,7) 3/ (,7) 3/ (,7) 3/ (,7) 3/ (,7) 3/ (,7) 3/ (,7) 3/ (,7) 3/ (,7) 3/ (,7) 3/ (,7) 3/ (,7) 3/ (,7) 3/ (,7) 3/ (,7) 3/ (,7) 3/ (,7) 3/ (,7) 3/ (,7) (,35) (,35).09 (,3).5 (,9).09 (,3).5 (,9).09 (,3).5 (,9).09 (,3).5 (,9).09 (,3).5 (,9).09 (,3).5 (,9).09 (,3).5 (,9).09 (,3).5 (,9).09 (,3).5 (,9) / / 3/ 3/ 5/ 5/ (3,) (3,) (,7) (,7) (,35) (,35) (7,9) (7,9) (9,53) (9,53) 7/ (,) 7/ (,) / (,70) / (,70) 9/(,9) 9/(,9) (5,) (5,).09 (,3) / (7,).5 (,9) / (7,).09 (,3).5 (,9) (9,05) (9,05).09 (,3) 3/(0,).5 (,9) 3/(0,).09 (,3).5 (,9) (,) (,).09 (,3) 5/(3,).5 (,9) 5/(3,).09 (,3).5 (,9).09 (,3).5 (,9) (5,0) (5,0) / / (3,) (3,) ITEM NUMBE DESCIPTION A B L SCEW 3SP033 3SP03 3SP035 3SP03 3SP037 3SP03 3SP039 3SP00 3SP0 3SP0 3SP03 3SP0 3SP05 3SP0 3SP07 3SP0 3SP09 3SP050 SP 33 SP 3 SP 35 SP 3 SP 37 SP 3 SP 39 SP 0 SP SP SP 3 SP SP 5 SP SP 7 SP SP 9 SP 50 (,35) (,35) (,35) (,35) (,35) (,35) (,35) (,35) (,35) (,35) (,35) (,35) (,35) (,35) (,35) (,35) (,35) (,35).0 (3,5).7 (,3).09 (,3).5 (,9).0 (3,5).7 (,3).09 (,3).5 (,9).0 (3,5).7 (,3).09 (,3).5 (,9).0 (3,5).7 (,3).09 (,3).5 (,9).0 (3,5).7 (,3) / / 3/ 3/ 3/ 3/ 5/ 5/ 5/ 5/ (3,) (3,) (,7) (,7) (,7) (,7) (,35) (,35) (,35) (,35) (7,9) (7,9) (7,9) (7,9) (9,53) (9,53) (9,53) (9,53) 3SP05 3SP05 3SP053 3SP05 3SP055 3SP05 3SP057 3SP05 3SP059 3SP00 3SP0 3SP0 3SP03 3SP0 3SP05 3SP0 3SP07 3SP0 3SP09 3SP070 3SP07 3SP07 3SP073 SP 5 SP 5 SP 53 SP 5 SP 55 SP 5 SP 57 SP 5 SP 59 SP 0 SP SP SP 3 SP SP 5 SP SP 7 SP SP 9 SP 70 SP 7 SP 7 SP 73 (,35) (,35) (,35) (,35) (,35) (,35) (,35) (,35) (,35) (,35) (,35) (,35) (,35) (,35) (,35) (,35) (,35) (,35) (,35) (,35) (,35) (,35) (,35).09 (,3).5 (,9).0 (3,5).7 (,3).09 (,3).5 (,9).0 (3,5).7 (,3).09 (,3).5 (,9).0 (3,5).7 (,3).09 (,3).5 (,9).0 (3,5).7 (,3).09 (,3).5 (,9).0 (3,5).7 (,3).09 (,3).5 (,9).0 (3,5) 7/ (,) 7/ (,) 7/ (,) 7/ (,) / (,70) / (,70) / (,70) / (,70) 9/ (,9) 9/ (,9) 9/ (,9) 9/ (,9) (5,) (5,) (5,) (5,) / (7,) / (7,) / (7,) / (7,) (9,05) (9,05) (9,05) 3SP07 SP 7 (,35).7 (,3) (9.05) 3SP075 3SP07 3SP077 3SP07 3SP079 3SP00 3SP0 3SP0 3SP03 3SP0 SP 75 SP 7 SP 77 SP 7 SP 79 SP 0 SP SP SP 3 SP (,35) (,35) (,35) (,35) (,35) (,35) (,35) (,35) (,35) (,35).09 (,3).5 (,9).0 (3,5).7 (,3).09 (,3).5 (,9).0 (3,5).7 (,3).09 (,3).5 (,9) 3/ (0,) 3/ (0,) 3/ (0,) 3/ (0,) (,) (,) (,) (,) 5/ (3,) 5/ (3,) 3SP05 SP 5 (,35).0 (3,5) 5/ (3,) 3SP0 SP (,35).7 (,3) 5/ (3,) 3SP07 SP 7 (,35).09 (,3) (5,0) 3SP0 SP (,35).5 (,9) (5,0) TELEPHONE: (70) 53- / 53- micro plastics, inc. AX: (70) 53-7

69 PEVIOUS PAGE O CON TEN TS SPACES IN DEX A-Z ITEM NUMBE DESCIPTION A B L SCEW 3SP09 SP 9 (,35).0 (3,5) (5,0) 3SP090 SP 90 (,35).7 (,3) (5,0) 3SP09 SP 9 5/ (7,9).5 (,9) / (3,) 3SP09 SP 9 5/ (7,9).0 (3,5) / (3,) 3SP093 SP 93 5/ (7,9).7 (,3) / (3,) 3SP09 SP 9 5/ (7,9).9 (,93) / (3,) 0 3SP095 SP 95 5/ (7,9).5 (,9) 3/ (,7) 3SP09 SP 9 5/ (7,9).0 (3,5) 3/ (,7) 3SP097 SP 97 5/ (7,9).7 (,3) 3/ (,7) 3SP09 SP 9 5/ (7,9).9 (,93) 3/ (,7) 0 3SP099 SP 99 5/ (7,9).5 (,9) (,35) 3SP00 SP00 5/ (7,9).0 (3,5) (,35) 3SP0 SP0 5/ (7,9).7 (,3) (,35) 3SP0 SP0 5/ (7,9).9 (,93) (,35) 0 3SP03 SP03 5/ (7,9).5 (,9) 5/ (7,9) 3SP0 SP0 5/ (7,9).0 (3,5) 5/ (7,9) 3SP05 SP05 5/ (7,9).7 (,3) 5/ (7,9) 3SP0 SP0 5/ (7,9).9 (,93) 5/ (7,9) 0 3SP07 SP07 5/ (7,9).5 (,9) (9,53) 3SP0 SP0 5/ (7,9).0 (3,5) (9,53) 3SP09 SP09 5/ (7,9).7 (,3) (9,53) 3SP0 SP0 5/ (7,9).9 (,93) (9,53) 0 3SP SP 5/ (7,9).5 (,9) 7/ (,) 3SP SP 5/ (7,9).0 (3,5) 7/ (,) 3SP3 SP3 5/ (7,9).7 (,3) 7/ (,) 3SP SP 5/ (7,9).9 (,93) 7/ (,) 0 3SP5 SP5 5/ (7,9).5 (,9) / (,70) 3SP SP 5/ (7,9).0 (3,5) / (,70) 3SP7 SP7 5/ (7,9).7 (,3) / (,70) 3SP SP 5/ (7,9).9 (,93) / (,70) 0 3SP9 SP9 5/ (7,9).5 (,9) 9/ (,9) 3SP0 SP0 5/ (7,9).0 (3,5) 9/ (,9) 3SP SP 5/ (7,9).7 (,3) 9/ (,9) 3SP SP 5/ (7,9).9 (,93) 9/ (,9) 0 3SP3 SP3 5/ (7,9).5 (,9) (5,) 3SP SP 5/ (7,9).0 (3,5) (5,) 3SP5 SP5 5/ (7,9).7 (,3) (5,) 3SP SP 5/ (7,9).9 (,93) (5,) 0 3SP7 SP7 5/ (7,9).5 (,9) / (7,) 3SP SP 5/ (7,9).0 (3,5) / (7,) 3SP9 SP9 5/ (7,9).7 (,3) / (7,) 3SP30 SP30 5/ (7,9).9 (,93) / (7,) 0 3SP3 SP3 5/ (7,9).5 (,9) (9,05) 3SP3 SP3 5/ (7,9).0 (3,5) (9,05) 3SP33 SP33 5/ (7,9).7 (,3) (9,05) 3SP3 SP3 5/ (7,9).9 (,93) (9,05) 0 3SP35 SP35 5/ (7,9).5 (,9) 3/ (0,3) 3SP3 SP3 5/ (7,9).0 (3,5) 3/ (0,3) 3SP37 SP37 5/ (7,9).7 (,3) 3/ (0,3) 3SP3 3SP39 3SP0 3SP SP3 SP39 SP0 SP 5/ (7,9) 5/ (7,9) 5/ (7,9) 5/ (7,9).9 (,93).5 (,9).0 (3,5).7 (,3) 3/ (0,3) (,) (,) (,) 0 3SP SP 5/ (7,9).9 (,93) (,) 0 3SP3 SP3 5/ (7,9).5 (,9) 5/ (3,) 3SP SP 5/ (7,9).0 (3,5) 5/ (3,) STANDAD NYLON SPACES V ITEM NUMBE DESCIPTION A B L SCEW 3SP5 SP5 5/ (7,9).7 (,3) 5/ (3,) 3SP SP 5/ (7,9).9 (,93) 5/ (3,) 0 3SP7 SP7 5/ (7,9).5 (,9) (5,0) 3SP 3SP9 SP SP9 5/ (7,9) 5/ (7,9).0 (3,5).7 (,3) (5,0) (5,0) 3SP50 SP50 5/ (7,9).9 (,93) (5,0) 0 3SP5 3SP59 3SP0 3SP 3SP 3SP3 3SP 3SP5 3SP 3SP7 3SP 3SP9 3SP70 3SP7 3SP7 SP5 SP59 SP0 SP SP SP3 SP SP5 SP SP7 SP SP9 SP70 SP7 SP7 (9,53) (9,53) (9,53) (9,53) (9,53) (9,53) (9,53) (9,53) (9,53) (9,53) (9,53) (9,53) (9,53) (9,53) (9,53).0 (3,5).7 (,3).9 (,93).0 (3,5).7 (,3).9 (,93).0 (3,5).7 (,3).9 (,93).0 (3,5).7 (,3).9 (,93).0 (3,5).7 (,3).9 (,93) / / / 3/ 3/ 3/ 5/ 5/ 5/ (3,) (3,) (3,) (,7) (,7) (,7) (,35) (,35) (,35) (7,9) (7,9) (7,9) (9,53) (9,53) (9,53) SP73 3SP7 3SP75 3SP7 3SP77 3SP7 3SP79 3SP0 3SP 3SP 3SP3 3SP SP73 SP7 SP75 SP7 SP77 SP7 SP79 SP0 SP SP SP3 SP (9,53) (9,53) (9,53) (9,53) (9,53) (9,53) (9,53) (9,53) (9,53) (9,53) (9,53) (9,53).0 (3,5).7 (,3).9 (,93).0 (3,5).7 (,3).9 (,93).0 (3,5).7 (,3).9 (,93).0 (3,5).7 (,3).9 (,93) 7/ (,) 7/ (,) 7/ (,) / (,70) / (,70) / (,70) 9/ (,9) 9/ (,9) 9/ (,9) (5,) (5,) (5,) SP5 3SP 3SP7 SP5 SP SP7 (9,53) (9,53) (9,53).0 (3,5).7 (,3).9 (,93) / / / (7,) (7,) (7,) 0 3SP 3SP9 3SP90 3SP9 3SP9 3SP93 3SP9 3SP95 3SP9 3SP97 3SP9 3SP99 3SP00 SP SP9 SP90 SP9 SP9 SP93 SP9 SP95 SP9 SP97 SP9 SP99 SP00 (9,53) (9,53) (9,53) (9,53) (9,53) (9,53) (9,53) (9,53) (9,53) (9,53) (9,53) (9,53) (9,53).0 (3,5).7 (,3).9 (,93).0 (3,5).7 (,3).9 (,93).0 (3,5).7 (,3).9 (,93).0 (3,5).7 (,3).9 (,93).0 (3,5) (9,05) (9,05) (9,05) 3/ (0,) 3/ (0,) 3/ (0,) (,) (,) (,) 5/ (3,) 5/ (3,) 5/ (3,) (5,0) mpsales@microplastics.com micro plastics, inc. WEBSITE: 9

70 PEVIOUS PAGE O CON TEN TS SPACES IN DEX A-Z V ALL STANDAD NYLON SPACES CAN BE TAPPED TWO THEAD SIZES LAGE THAN THE SCEW SIZE LISTED. O EXAM PLE: 3SP03 WITH A SCEW SIZE O CAN BE TAPPED THEAD. STANDAD NYLON SPACES ITEM NUMBE DESCIPTION A B L SCEW 3SP0 3SP0 SP0 SP0 (9,53) (9,53).7 (,3).9 (,93) (5,0) (5,0) 0 3SP03 3SP0 3SP05 3SP0 3SP07 3SP0 3SP09 3SP0 3SP 3SP 3SP3 3SP 3SP5 3SP 3SP7 3SP 3SP9 3SP0 3SP 3SP 3SP3 3SP 3SP5 3SP 3SP7 3SP 3SP9 3SP30 3SP3 3SP3 SP03 SP0 SP05 SP0 SP07 SP0 SP09 SP0 SP SP SP3 SP SP5 SP SP7 SP SP9 SP0 SP SP SP3 SP SP5 SP SP7 SP SP9 SP30 SP3 SP3 / (,70) / (,70) / (,70) / (,70) / (,70) / (,70) / (,70) / (,70) / (,70) / (,70) / (,70) / (,70) / (,70) / (,70) / (,70) / (,70) / (,70) / (,70) / (,70) / (,70) / (,70) / (,70) / (,70) / (,70) / (,70) / (,70) / (,70) / (,70) / (,70) / (,70).0 (3,5).7 (,3).9 (,93).9 (5,5).0 (,0).0 (3,5).7 (,3).9 (,93).9 (5,5).0 (,0).0 (3,5).7 (,3).9 (,93).9 (5,5).0 (,0).0 (3,5).7 (,3).9 (,93).9 (5,5).57 (,53).0 (3,5).7 (,3).9 (,93).9 (5,5).57 (,53).0 (3,5).7 (,3).9 (,93).9 (5,5).57 (,53) / / / / / 3/ 3/ 3/ 3/ 3/ 5/ 5/ 5/ 5/ 5/ 7/ 7/ 7/ 7/ 7/ (3,) (3,) (3,) (3,) (3,) (,7) (,7) (,7) (,7) (,7) (,35) (,35) (,35) (,35) (,35) (7,9) (7,9) (7,9) (7,9) (7,9) (9,53) (9,53) (9,53) (9,53) (9,53) (,) (,) (,) (,) (,) SP33 SP33 / (,70).0 (3,5) `/ (,70) ITEM NUMBE DESCIPTION A B L SCEW 3SP3 3SP35 SP3 SP35 / (,70) / (,70).7 (,3).9 (,93) / (,70) / (,70) 0 3SP3 SP3 / (,70).9 (5,5) / (,70) 3SP37 SP37 / (,70).57 (,53) / (,70) 3SP3 SP3 / (,70).0 (3,5) 9/ (,9) 3SP39 3SP0 3SP 3SP 3SP3 3SP 3SP5 3SP 3SP7 SP39 SP0 SP SP SP3 SP SP5 SP SP7 / (,70) / (,70) / (,70) / (,70) / (,70) / (,70) / (,70) / (,70) / (,70).7 (,3).9 (,93).9 (5,5).57 (,53).0 (3,5).7 (,3).9 (,93).9 (5,5).57 (,53) 9/ (,9) 9/ (,9) 9/ (,9) 9/ (,9) (5,) (5,) (5,) (5,) (5,) 0 0 3SP SP / (,70).0 (3,5) / (7,) 3SP9 3SP50 3SP5 3SP5 3SP53 3SP5 3SP55 3SP 3SP57 3SP5 3SP59 3SP0 3SP 3SP 3SP3 3SP 3SP5 3SP 3SP7 3SP 3SP9 3SP70 3SP7 3SP7 3SP73 3SP7 3SP75 3SP7 3SP77 SP9 SP50 SP5 SP5 SP53 SP5 SP55 SP SP57 SP5 SP59 SP0 SP SP SP3 SP SP5 SP SP7 SP SP9 SP70 SP7 SP7 SP73 SP7 SP75 SP7 SP77 / (,70) / (,70) / (,70) / (,70) / (,70) / (,70) / (,70) / (,70) / (,70) / (,70) / (,70) / (,70) / (,70) / (,70) / (,70) / (,70) / (,70) / (,70) / (,70) / (,70) / (,70) / (,70) / (,70) / (,70) / (,70) / (,70) / (,70) / (,70) / (,70).7 (,3).9 (,93).9 (5,5).57 (,53).0 (3,5).7 (,3).9 (,93).9 (5,5).0 (,0).0 (3,5).7 (,3).9 (,93).9 (5,5).0 (,0).0 (3,5).7 (,3).9 (,93).9 (5,5).0 (,0).0 (3,5).7 (,3).9 (,93).9 (5,5).57 (,53).0 (3,5).7 (,3).9 (,93).9 (5,5).57 (,53) / (7,) / (7,) / (7,) / (7,) (9,05) (9,05) (9,05) (9,05) (9,05) 3/ (0,) 3/ (0,) 3/ (0,) 3/ (0,) 3/ (0,) 7/ (,) 7/ (,) 7/ (,) 7/ (,) 7/ (,) 5/ (3,) 5/ (3,) 5/ (3,) 5/ (3,) 5/ (3,) (5,0) (5,0) (5,0) (5,0) (5,0) TELEPHONE: (70) 53- / 53- micro plastics, inc. AX: (70) 53-7

71 PEVIOUS PAGE O CON TEN TS SPACES V STANDAD LONG NYLON SPACES ITEM NUMBE DESCIPTION A B L ITEM NUMBE DESCIPTION A B L 3SP300 3SP30 3SP30 3SP305 3SP30 3SP309 3SP3 3SP33 3SP3 3SP37 3SP30 3SP3 3SP3 3SP35 3SP3 3SP39 3SP335 3SP33 3SP337 3SP33 3SP339 3SP30 3SP3 3SP3 3SP33 3SP3 3SP35 3SP3 3SP37 3SP3 3SP39 3SP350 3SP35 3SP35 3SP353 3SP35 3SP355 3SP35 3SP357 3SP35 3SP359 3SP30 3SP3 3SP3 3SP33 SP 300 SP 30 SP 30 SP 305 SP 30 SP 309 SP 3 SP 33 SP 3 SP 37 SP 30 SP 3 SP 3 SP 35 SP 3 SP 39 SP 335 SP 33 SP 337 SP 33 SP 339 SP 30 SP 3 SP 3 SP 33 SP 3 SP 35 SP 3 SP 37 SP 3 SP 39 SP 350 SP 35 SP 35 SP 353 SP 35 SP 355 SP 35 SP 357 SP 35 SP 359 SP 30 SP 3 SP 3 SP 33 (,35) (,35) (,35) (,35) (,35) (,35) (,35) (,35) (,35) (,35) (,35) (,35) (,35) (,35) (,35) (,35) 5/ (7,9) 5/ (7,9) 5/ (7,9) 5/ (7,9) 5/ (7,9) 5/ (7,9) 5/ (7,9) 5/ (7,9) 5/ (7,9) 5/ (7,9) 5/ (7,9) 5/ (7,9) 5/ (7,9) 5/ (7,9) 5/ (7,9) 5/ (7,9) 5/ (7,9) 5/ (7,9) 5/ (7,9) 5/ (7,9) 5/ (7,9) 5/ (7,9) 5/ (7,9) 5/ (7,9) 5/ 7,9) 5/ (7,9) 5/ (7,9) 5/ (7,9) 5/ (7,9).5 (,9).0 (3,5).5 (,9).0 (3,5).5 (,9).0 (3,5).5 (,9).0 (3,5).5 (,9).0 (3,5).5 (,9).0 (3,5).5 (,9).0 (3,5).5 (,9).0 (3,5).5 (,9).0 (3,5).7 (,3).9 (,93).5 (,9).0 (3,5).7 (,3).9 (,93).5 (,9).0 (3,5).7 (,3).9 (,93).5 (,9).0 (3,5).7 (,3).9 (,93).5 (,9).0 (3,5).7 (,3).9 (,93).5 (,9).0 (3,5).7 (,3).9 (,93).5 (,9).0 (3,5).7 (,3).9 (,93).5 (,9) -/ -/ -/ -/ -3/ -3/ / -5/ / -7/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -3/ -3/ -3/ -3/ / -5/ -5/ -5/ / -7/ -7/ -7/ -/ (7,00) (7,00) (,5) (,5) (30,) (30,) (3,75) (3,75) (33,35) (33,35) (3,93) (3,93) (3,53) (3,53) (3,0) (3,0) (7,00) (7,00) (7,00) (7,00) (,5) (,5) (,5) (,5) (30,) (30,) (30,) (30,) (3,75) (3,75) (3,75) (3,75) (33,35) (33,35) (33,35) (33,35) (3,93) (3,93) (3,93) (3,93) (3,53) (3,53) (3,53) (3,53) (3,0) 3SP3 3SP35 3SP3 3SP37 3SP373 3SP37 3SP375 3SP37 3SP377 3SP37 3SP379 3SP30 3SP3 3SP3 3SP33 3SP3 3SP35 3SP3 3SP37 3SP3 3SP39 3SP390 3SP39 3SP39 3SP393 3SP39 3SP395 SP 3 SP 35 SP 3 SP 37 SP 373 SP 37 SP 375 SP 37 SP 377 SP 37 SP 379 SP 30 SP 3 SP 3 SP 33 SP 3 SP 35 SP 3 SP 37 SP 3 SP 39 SP 390 SP 39 SP 39 SP 393 SP 39 SP 395 5/ (7,9) 5/ (7,9) 5/ (7,9) (9,53) (9,53) (9,53) (9,53) (9,53) (9,53) (9,53) (9,53) (9,53) (9,53) (9,53) (9,53) (9,53) (9,53) (9,53) (9,53) (9,53) (9,53) (9,53) (9,53) (9,53) (9,53) (9,53) (9,53).0 (3,5) -/ (3,0).7 (,3) -/ (3,0).9 (,93) -/ (3,0).0 (3,5) -/ (7,00).7 (,3) -/ (7,00).9 (,93) -/ (7,00).0 (3,5) -/ (,5).7 (,3) -/ (,5).9 (,93) -/ (,5).0 (3,5) -3/ (30,).7 (,3) -3/ (30,).9 (,93) -3/ (30,).0 (3,5) - (3,75).7 (,3) - (3,75).9 (,93) - (3,75).0 (3,5) -5/ (33,35).7 (,3) -5/ (33,35).9 (,93) -5/ (33,35).0 (3,5) - (3,93).7 (,3) - (3,93).9 (,93) - (3,93).0 (3,5) -7/ (3,53).7 (,3) -7/ (3,53).9 (,93) -7/ (3,53).0 (3,5) -/ (3,0).7 (,3) -/ (3,0).9 (,93) -/ (3,0) Tough and resilient, nylon spacers are useful for many applications. Ideal for use in electrical and electronic assemblies, they also can be used as bushings, bearings, rollers, and glides. Molded from corrosion resistant Type Nylon, all parts are available on short delivery from standard tooling. Samples for testing are available but NOT ALL SIZES are in stock. Special sizes and lengths at a slight extra tooling charge. Parts are stocked in Nylon / UL 9V Parts can be furnished in: Acetal, esin Celanese Celcon M70 UL 9HB Tolerances: O.D. +/-.05; I.D. +/-.005; Length +/ mpsales@microplastics.com micro plastics, inc. WEBSITE: 7

72 PEVIOUS PAGE O CON TEN TS SPACES IN DEX A-Z V SPECIAL NYLON SPACES ITEM NUMBE DESCIPTION A B L 3S0530 S (3,).07 (,9) 5/ (7,9) 3S053 S 53.3 (3,50).03 (0,97).5 (3,7) 3S000 S 00.0 (,0).00 (,5) 3/3 (0,3) 3S000 S 00.9 (,9).093 (,3) 3/ (5,) 3S07 S 7. (,77).09 (,9).5 (3,) 3S075 S 75.7 (,75).07 (,70) 9/ (3,5) 3S070 S 70.7 (,75).09 (,) 5/3 (3,97) 3S07 S 7.7 (,75).03 (,0).00 (5,0) 3S07 S 7 3/ (,7).5 (,9) 9/3 (7,) 3S075 S 75.7 (,75).0 (3,05) 5/ (7,9) 3S07 S 7.7 (,75).35 (3,3) (,35) 3S0730 S (,75).0 (3,05) /3 (,7) 3S0735 S (,75).0 (3,05) 7/ (,) 3S075 S 75.7 (,75).09 (,3) 7/3 (,) 3S0790 S (,75).09 (,3) 3/ (3,7) 3S09330 S (,90).5 (3,) (,35) 3S00030 S (5,0).5 (3,) / (,37) 3S0003 S (5,0).5 (3,).0 (,79) 3S0003 S (5,03).09 (,77).35 (,7) 3S0033 S (5,).30 (3,30) 9/3 (7,) 3S005 S 05.0 (5,33).5 (3,9).50 (,35) 3S0337 S 337. (5,5).5 (3,).35 (9,7) 3S0535 S (5,).5 (3,) / (,33) 3S030 S 30. (5,5).0 (3,5) 5/3 (3,97) 3S003 S 03.0 (5,59).3 (3,50) /3 (,) 3S00 S 0.5 (,).75 (,5) 5/3 (3,97) 3S050 S (,35).7 (,3).3 (0,9) 3S050 S (,35). (3,0) 5/ (0,) 3S0503 S (,35).7 (,3).355 (9,0) 3S050 S (,35).5 (3,).3 (0,90) 3S0505 S (,35). (,) / (,70) 3S0507 S (,5).50 (3,). (,) 3S050 S (,35).7 (,3).575 (,) 3S0509 S (,35).7 (,3).75 (,07) 3S050 S (,35).0 (3,05).39 (9,) 3S050 S (,35).5 (3,).0 (0,7) 3S050 S (,35).5 (,9) 7/3 (5,55) 3S05050 S (,35).7 (3,73) 9/ (7,5) 3S05053 S (,35).0 (3,5) 7/3 (3,9) 3S05055 S (,35).0 (3,5) 35/ (3,7) 3S0505 S (,35).0 (3,5).0 (,) 3S050 S 50.0 (,0).00 (5,0) 9/3 (5,0) 3S0505 S (,35).0 (,0).750 (9,05) 3S05070 S (,35). (3,5) 9/3 (7,) 3S05075 S (,35).5 (,9).07 (5,) 3S05090 S (,35).5 (,9) -5/ (33,3) 3S0509 S (,3).5 (3,) 5/3 (3,97) 7 TELEPHONE: (70) 53- / 53- micro plastics, inc. AX: (70) 53-7

73 PEVIOUS PAGE O CON TEN TS SPACES IN DEX A-Z V SPECIAL NYLON SPACES ITEM NUMBE DESCIPTION A B L 3S05095 S (,3).5 (,9) 7/3 (3,9) 3S0750 S (,99).95 (,95).0 (0,) 3S0030 S (7,).70 (,3).300 (7,) 3S003 S 03.0 (7,).5 (3,) 9/ (7,5) 3S0 S. (7,). (5,9).00 (0,) 3S09 S 9.9 (7,5).5 (3,) 3/3 (,3) 3S030 S 30.3 (7,93).095 (,) (,35) 3S03 S 3.3 (7,93).9 (,93).05 (35,) 3S03 S 3.3 (7,93).9 (,93).530 (3,) 3S03 S 3.3 (7,93).0 (3,5) 9/3 (7,) 3S03 S 3.3 (7,93).95 (,95). (5,) 3S035 S 35.3 (7,93).5 (3,9). (,50) 3S03 S 3 5/ (7,9). (5,79).0 (,0) 3S0330 S (7,93). (,5) (,35) 3S033 S 33 5/ (7,9).7 (,3) -7/ (,93) 3S03 S 3.3 (7,93).9 (,93).55 (9,33) 3S0350 S (7,93). (,5).95 (,57 3S035 S 35.3 (7,93).7 (,3) -7/ (7,3) 3S035 S 35.0 (,9).35 (,7) 3/ (,75) 3S0353 S (7,95).7 (,75).7 (,3) 3S035 S 35 5/ (7,9).7 (,3).7 (7,0) 3S0355 S (,3).5 (5,).0 (5,59) 3S035 S 35.3 (7,93).5 (5,7) 7/ (,) 3S030 S 30.3 (,03). (,7) 3/ (5,) 3S03 S 3.50 (,35).0 (3,05).00 (5,0) 3S03553 S (,99).7 (,37).53 (3,9) 3S0303 S (9,).3 (,03) (,35) 3S S (9,0).5 (,73) 5/3 (3,9) 3S03703 S (9,53).5 (,5).53 (,5) 3S0370 S (9,0).9 (,93). (0,) 3S037 S (9,50). (,30) 3/3 (0,3) 3S0375 S (9,55).75 (,5).50 (3,) 3S03755 S (9,53).9 (5,5) 5/3 (3,9) 3S03757 S (9,53).9 (5,5) / (,3) 3S0375 S (9,53).5 (,0) 3/ (,75) 3S03750 S (9,53).9 (5,5) 3/ (5,) 3S0375 S (9,53). (5,5) 7/ (,) 3S0375 S (9,53).0 (5,59) (9,53) 3S03755 S (9,53).5 (5,7).50 (,35) 3S03753 S (9,53).0 (3,5) /3 (,73) 3S03753 S (9,53).55 (,).30 (9,5) 3S0375 S (9,53).5 (,73) (,35) 3S0375 S (9,53).09 (,39) 9/3 (7,) 3S03757 S (9,53).03 (5,) 7/ (,7) 3S0375 S (9,53).03 (5,) 7/ (,7) 3S S (9,53).5 (,0) (9,53) 3S03755 S (9,53).5 (,73) (9,53) mpsales@microplastics.com micro plastics, inc. WEBSITE: 73

74 PEVIOUS PAGE O CON TEN TS SPACES IN DEX A-Z V SPECIAL NYLON SPACES ITEM NUMBE DESCIPTION A B L 3S S (9,53).50 (,35).593 (5,0) 3S03755 S (9,53).5 (,73) / (,70) 3S S (9,53).0 (3,5).700 (7,7) 3S03757 S (9,53).55 (,).700 (7,7) 3S S (9,53).5 (,73) (,) 3S03750 S (9,53).5 (,73) (5,0) 3S03755 S (9,53).57 (,53) - (3,75) 3S S (9,53).5 (,73) (9,05) 3S03759 S (9,53).5 (,9) -/ (7,00) 3S0303 S (9,5).30 (,3).3 (9,70) 3S035 S 35 (5,).35 (9,7).7 (,75) 3S03930 S (9,).5 (,3) / (3,) 3S03935 S (9,9).5 (3,3) (,35) 3S0393 S (9,9).9 (,9) 5/ (5,9) 3S03959 S (0,03).30 (,3).59 (5,0) 3S0000 S (0,).0 (3,5) 3/3 (,5) 3S0005 S (0,).0 (3,5) 5/3 (9,) 3S0030 S (0,3).9 (,3) (,35) 3S000 S 00.0 (0,3).7 (,7) / (,70) 3S0070 S (0,3).5 (,73) (9,05) 3S0075 S (0,3).0 (7,) (9,53) 3S005 S 05.0 (0,3).5 (,73) (5,0) 3S0700 S (0,5). (,) 7/ (,) 3S070 S (0,0). (,50).0 (5,59) 3S037 S (,0).3 (7,9). (7,) 3S0379 S 379 7/ (,).7 (,3).55 (,) 3S0500 S (,3).35 (,) 7/ (0,7) 3S000 S 00.0 (,).5 (,0) 9/ (,9) 3S039 S 39.3 (,7).90 (,3) 5/ (7,9) 3S03 S 3. (,9).3 (7,9).30 (5,) 3S00 S 0.70 (,9).0 (3,05) 3/ (9,) 3S005 S (,0).9 (,5) / (,33) 3S00 S 0. (,9).33 (,7) 3/ (,7) 3S0 S. (,3).30 (,3).375 (9,53) 3S05000 S (,70).30 (,3).70 (,) 3S0500 S (,7).9 (,3).390 (9,9) 3S05005 S (,70).9 (,93) 3/3 (0,3) 3S0500 S (,70).5 (,73).5 (3,9) 3S05007 S (,70).5 (,73).00 (5,0) 3S0500 S (,70).57 (,53) 5/ (5,9) 3S05009 S (,70).95 (,95).5 (3,7) 3S0500 S (,70).0 (,0) (,35) 3S05003 S (,70). (7,) 3/ (0,) 3S05005 S (,70).70 (,3).55 (,) 3S05007 S (,70).70 (,3).70 (,) 3S0500 S (,70).3 (7,93) 5/3 (3,97) 3S05003 S (,70).3 (9,70).3 (7,9) 3S05000 S (,70).3 (,7) 3/ (0,) 3S0500 S (,70).375 (9,53).5 (5,7) 7 TELEPHONE: (70) 53- / 53- micro plastics, inc. AX: (70) 53-7

75 PEVIOUS PAGE O CON TEN TS SPACES IN DEX A-Z V SPECIAL NYLON SPACES ITEM NUMBE DESCIPTION A B L 3S05005 S (,70).57 (,53) 3/3 (0,3) 3S0500 S 500 / (,70).3 (7,93) -5/ (33,33) 3S05007 S (,70).3 (9,3).70 (,9) 3S S (,70).3 (,33) (5,0) 3S S (,70).33 (9,73) / (,70) 3S05000 S (,7).57 (,53) (9,53) 3S0500 S (,70).335 (,5).09 (5,3) 3S0500 S (,3).35 (9,7) 5/3 (3,97) 3S05003 S (,70).5 (7,).30 (,00) 3S S (,70).3 (,03) / (,70) 3S05000 S (,70).30 (9,5) 7/ (0,7) 3S0500 S (,70).375 (9,53) 7/ (,) 3S05005 S (,70). (7,) (9,53) 3S0500 S (,70).0 (,0) - (,) 3S05009 S (,70).375 (9,53).30 (9,5) 3S S (,70).375 (9,53) (5,) 3S05009 S (,70).375 (9,53).35 (,3) 3S S (,70).5 (7,).930 (3,) 3S05009 S (,70).375 (9,53) / (7,) 3S S (,70).35 (9,7) (5,0) 3S05009 S (,70).0 (,0) - (3,93) 3S050 S (,95).30 (,3) (,) 3S05030 S (,).379 (9,3) (9,53) 3S0503 S (,7).375 (9,53) / (,70) 3S05 S (3,97).5 (,) 9/ (,9) 3S05337 S (,30). (7,) (9,53) 3S055 S (,35).33 (,3).5 (,) 3S057 S (,0).3 (,0) 35/ (3,7) 3S0570 S (,0).37 (,0).0 (0,3) 3S05703 S (,).30 (,3) 35/ (3,7) 3S S (,9).3 (7,9).30 (7,7) 3S05903 S (,99).3 (7,9) 3/ (9,) 3S00550 S (5,39).03 (5,) (5,) 3S00 S 0.5 (5,).35 (9,7) 3/ (,7) 3S073 S 73.7 (5,7).33 (7,95) / (7,) 3S00 S 0.0 (5,75).350 (,9) 3/ (,7) 3S0035 S (5,75).507 (,9) -/ (,5) 3S000 S 00.0 (5,75).50 (,0) 3/ (0,) 3S0050 S (5,75).50 (,0).05 (35,9) 3S00 S 0.0 (5,75).50 (,0).5 (5,) 3S033 S 33.3 (5,).3 (7,90) 3/ (0,) 3S05 S 5.5 (5,).0 (,0).3 (7,9) 3S055 S 55.0 (5,75).33 (,0) 5/3 (3,9) 3S059 S 59.5 (5,).9 (,5) (,35) 3S050 S 50.3 (,00).50 (,70) - (3,75) 3S05 S 5.5 (5,).0 (3,5).375 (9,53) 3S05 S 5.5 (5,).35 (,0) (,35) 3S053 S (,3).35 (9,7).30 (5,) 3S05 S 5.5 (5,). (0,).55 (3,9) mpsales@microplastics.com micro plastics, inc. WEBSITE: 75

76 PEVIOUS PAGE O CON TEN TS SPACES IN DEX A-Z V SPECIAL NYLON SPACES ITEM NUMBE DESCIPTION A B L 3S055 S 55.5 (5,).390 (9,9) (,35) 3S05 S 5.5 (5,).30 (9,5).750 (9,05) 3S057 S 57.5 (5,).3 (,33).50 (,35) 3S05 S 5.5 (5,).0 (7,) 7/ (,0) 3S0530 S (5,9).50 (,35) (9,53) 3S053 S 53.5 (5,).0 (,0) (,35) 3S0535 S (5,).500 (,70) 5/ (7,9) 3S0537 S (5,).3 (,9) (9,53) 3S053 S 53.7 (5,93). (,9).7 (,) 3S050 S 50.5 (5,).375 (9,53) (9,53) 3S05 S 5.5 (5,).375 (9,53). (,73) 3S0550 S (5,57). (7,) / (,70) 3S00 S 0.5 (5,). (7,) 3/ (0,) 3S0 S.5 (5,).3 (9,0) 39/ (5,7) 3S05 S 5.5 (5,).50 (,3) (5,) 3S0570 S (,3).5 (0,0) (,) 3S057 S 57.5 (5,).50 (,3) (,) 3S057 S 57. (5,70).500 (,70) 3/ (,9) 3S0573 S (5,).3 (9,0).73 (,75) 3S050 S 50.5 (5,).57 (,53) / (3,) 3S05 S 5.5 (5,).375 (9,53).0 (,0) 3S0590 S (5,9). (,50) -/ (3,0) 3S050 S 50.0 (5,75).507 (,9) / (,70) 3S03050 S (,00).37 (9,0).50 (,70) 3S03550 S (,3).50 (3,).500 (,70) 3S035 S (3,9).35 (,3). (,) 3S0550 S (,).5 (3,) / (,70) 3S0530 S 530. (,50).0 (7,) 3/ (9,) 3S050 S 50. (,97).50 (,5) 5/ (3,) 3S07 S 7.7 (7,5).0 (,0).57 (,) 3S07 S 7.7 (7,5).5 (3,9) / (3,) 3S0903 S (7,7).00 (5,).5 (,) 3S09039 S (7,7).390 (9,9) (5,) 3S070 S 70.7 (,).5 (3,3) 7/3 (5,55) 3S07 S 7.70 (,9).39 (9,9).30 (5,) 3S07 S 7.7 (,).5 (3,3) 9/3 (7,) 3S07050 S (,9).55 (3,0).9 (,5) 3S S (,5).5 (,73).95 (7,9) 3S07500 S (9,05).0 (7,). (,) 3S07500 S (,0).50 (,35) (,35) 3S0750 S (,90).397 (0,0).37 (9,) 3S0750 S (,9).37 (9,3).7 (,75) 3S07503 S (9,0).0 (,9). (5,7) 3S0750 S 750 (9,05).35 (,00) 5/ (7,9) 3S07505 S (9,05).5 (,55) 7/ (,0) 3S0750 S (9,05).0 (,0).375 (9,53) 3S07507 S 7507 (9,05) 5/ (7,9) 9/ (,9) 3S0750 S 750 (9,05). (,7) 5/ (7,9) 3S07509 S (9,05).370 (9,0) /3 (,7) 7

77 PEVIOUS PAGE O CON TEN TS SPACES IN DEX A-Z V SPECIAL NYLON SPACES ITEM NUMBE DESCIPTION A B L 3S S (9,05).0 (0,3).5 (,7) 3S07503 S (9,05).35 (,00).7 (,75) 3S07503 S (9,05).35 (9,7) 3/ (5,) 3S S / (9,05) (,35) 3/ (,7) 3S07503 S (9,05).55 (3,0).30 (,) 3S S (9,05).5 (,5).3 (9,7) 3S07503 S (9,05).3 (7,9).93 (3,) 3S S (,9).50 (,35) (9,53) 3S S (9,05).90 (,5) (9,53) 3S07500 S (9,05).33 (,0).50 (,35) 3S0750 S (,0).390 (9,9) (5,0) 3S0750 S (9,05).0 (,0).5 (5,) 3S07503 S (,0).30 (7,7).37 (,0) 3S0750 S 750 -(,5) (5,) (,35) 3S07505 S (,9).35 (9,7) 5/ (7,9) 3S0750 S (9,05).0 (,) (,35) 3S07507 S 7507 (9,05).30 (9,5).7 (,99) 3S07505 S 7505 (9,05).0 (,0) 9/ (,9) 3S S (9,05).50 (,95).700 (7,7) 3S S (9,05).3 (,3) (9,05) 3S07507 S (9,05).30 (,3) (5,0) 3S S (9,).00 (0,).90 (7,73) 3S0750 3S S 750 S (9,30).70 (9,30).0 (0,9).39 (0,0).00 (5,).90 (3,) 3S S S 7599 S (9,).775 (9,9).50 (7,73).507 (,9).05 (5,) (,35) 3S005 S (0,0).50 (3,) / (,70) 3S0 S. (0,3).3 (7,93) / (3,) 3S03 S 3. (0,3).03 (0,).50 (,35) 3S0 S. (0,3).03 (0,).70 (,03) 3S0 S.5 (0,95).03 (5,) (5,) 3S03 3S0705 S 3 S (0,95).70 (,0).57 (,53).53 (3,9).370 5/ (9,0) (9,9) 3S070 S 70. (,00) (,35).39 (0,0) 3S07537 S (,3).330 (,3).375 (9,53) 3S07539 S (,3.375 (9,53).3 (7,9) 3S0750 S (,3).5 (,73).375 (9,53) 3S07550 S (,3).5 (,3).5 (5,) 3S07555 S (,3).0 (7,).500 (,70) 3S09037 S (,).3 (,3).370 (9,0) 3S09775 S (3,9).75 (9,9).750 (9,05) 3S09550 S (,03). (,30).500 (,70) 3S095 S (5,0).5 (7,) (,35) 3S09550 S (,9).35 (,) / (,70) 3S000 S (5,0).50 (,35) / (3,) 3S0003 S (5,5).3 (,7) 5/ (7,9) 3S000 S (5,0).0 (,0) (9,53) 3S000 S (5,0).50 (,35) 3/ (,7) 3S0000 S (5,5).7 (,75) (,35) mpsales@microplastics.com micro plastics, inc. WEBSITE: 77

78 PEVIOUS PAGE O CON TEN TS SPACES IN DEX A-Z V SPECIAL NYLON SPACES ITEM NUMBE DESCIPTION A B L 3S000 S (5,0).50 (,35) (,35) 3S000 S (5,0).375 (9,53).00 (0,3) 3S0005 S (5,0).95 (3,) (,35) 3S000 S (5,0).50 (,35) 7/ (,0) 3S00030 S (5,0).50 (,35).5 (5,7) 3S0003 S (5,0) 33/ (3,0).375 (9,5) 3S00037 S (5,0).35 (9,7) (9,53) 3S0003 S (5,0).00 (5,0) (9,53) 3S0003 S (5,0).0 (0,3) 7/ (,0) 3S00050 S (5,0).755 (9,) 3/ (5,) 3S0005 S (5,0).3 (,33).500 (,70) 3S0005 S (5,0).375 (9,53).50 (,70) 3S0005 S (5,0).75 (9,3) 9/ (,9) 3S00057 S (9,97).50 (,35).7 (5,5) 3S0005 S (,99).3 (9,9) (9,53) 3S0000 S (5,07).500 (,70) (9,53) 3S00555 S (5,0).375 (9,53) (,35) 3S0570 S (,5). (0,3) / (3,) 3S0 S (,0).70 (,0) 3/ (,7) 3S07 S 07.0 (,5).05 (5,7).375 (9,53) 3S0 S 0.0 (,5). (7,) 7/ (,0) 3S030 S (3,50).505 (,3).500 (,70) 3S5075 S (3,75).77 (,50) (5,) 3S500 S (3,75). (,3).0 (,0) 3S50 S (3,75).75 (,) 9/ (,9) 3S50 S 50.5 (3,75).55 (,).53 (3,9) 3S550 S (3,50).3 (7,93) (7,9) 3S53 S 53 - (3,75).77 (,50) 9/ (,9) 3S53 S (3,75).50 (,95) 5/ (,35) 3S533 S (3,7).7 (9,33) 9/ (,9) 3S537 S (3,75).30 (9,5).3 (9,5) 3S5500 S (3,50).307 (7,0) / (,70) 3S550 S (3,75).00 (0,) (5,) 3S5750 S 5750 (3,75) 7/ (,7).750 (9,05) 3S0 S 0. (3,05).03 (,9).950 (,3) 3S355 S (33,33).07 (7,3) (9,05) 3S3 S 3-5/(33,33).35 (9,7).00 (,5) 3S3750 S (3.93).5 (,) / (3,) 3S050 S (37,0).5 (3,3).500 (,70) 3S500 S (3,0).7 (30,5) 3/ (9,3) 3S50050 S (3,0).0 (5,9).50 (,70) 3S590 S (,).3 (35,) 3/3 (,3) 3S7503 S (,5).9 (3,57) 9/3 (7,) 3S750 S (7,).50 (,35) (5,0) 3S350 S (5,3).70 (,70) / (3,) 3S35 S 35.3 (5,0).3 (,0).30 (3,30) 7 TELEPHONE: (70) 53- / 53- micro plastics, inc. AX: (70) 53-7

79 PEVIOUS PAGE O CON TEN TS SPACES IN DEX A-Z Molded from Type Nylon and then machine tapped, these spacers are low cost insulators that can be used in many electrical applications. Special sizes can be made to order from our large untapped spacer inventory. V TAPPED NYLON SPACES ITEM NUMBE DESCIPTION D L TAPPED 5TSP055 5TSP05 5TSP0 5TSP057 5TSP00 5TSP050 5TSP00 5TSP003 5TSP03 5TSP00 5TSP037 5TSP005 5TSP00 5TSP05 5TSP007 5TSP00 5TSP05 5TSP03 5TSP009 5TSP05 5TSP039 5TSP00 5TSP053 5TSP0 5TSP0 5TSP03 5TSP00 5TSP0 5TSP0 5TSP05 5TSP0 5TSP07 5TSP0 5TSP0 5TSP09 5TSP03 5TSP00 5TSP0 5TSP0 5TSP03 TSP 55 TSP 5 TSP 0 TSP 57 TSP TSP 50 TSP TSP 3 TSP 3 TSP TSP 37 TSP 5 TSP TSP 5 TSP 7 TSP TSP 5 TSP 3 TSP 9 TSP 5 TSP 39 TSP 0 TSP 53 TSP TSP TSP 3 TSP 0 TSP TSP TSP 5 TSP TSP 7 TSP TSP TSP 9 TSP 3 TSP 0 TSP TSP TSP 3 3/ (,7) 3/ (,7) 3/ (,7) (,35) (,35) (,35) (,35) (,35) (,35) (,35) (,35) (,35) (,35) (,35) (,35) (,35) (,35) (,35) (,35) (,35) (,35) (,35) (,35) (,35) (,35) (,35) (,35) (,35) (,35) (,35) 5/ (7,9) 5/ (7,9) 5/ (7,9) 5/ (7,9) 5/ (7,9) 5/ (7,9) 5/ (7,9) (9,53) (9,53) (9,53) 7/ / 7/ 5/ / (,) (,70) (,73) (,35) (,35) (7,9) (9,53) (,70) (5,) (9,05) (,) (5,0) 5/ / 9/ (,35) (7,9) (9,53) (,70) (,9) (5,) 5/ (9,05) (3,) (,) (5,0) / (3,0) / (,35) (9,53) (,70) (5,) (9,05) (,) (5,0) / (,35) (9,53) (,70) (5,) (9,05) (,) (5,0) / NOTE: ON THEADED SPACES AND LONGE, THE TAP IS OM EACH END AND NOT CONTINUOUS THOUGH. (,35) (9,53) (,70) * -5-0* -0* -0* -0* -0* -0* -0* -0* -3** -3** -3** -3** -3** -3** -3** -3** -3** -3** -3** -3*** -3*** -3*** -3*** -3*** -3*** -3*** -3*** -3*** -3*** -3*** -3*** -3*** -3*** 0-3**** 0-3**** 0-3**** ITEM NUMBE DESCIPTION D L TAPPED 5TSP0 5TSP0 5TSP05 5TSP05 5TSP0 5TSP07 5TSP0 5TSP0 5TSP09 5TSP07 5TSP030 5TSP03 5TSP03 5TSP033 5TSP0 5TSP03 5TSP09 5TSP035 5TSP099 5TSP00 5TSP0 5TSP0 5TSP03 5TSP0 5TSP05 5TSP07 5TSP09 5TSP 5TSP5 5TSP0 5TSP 5TSP 5TSP3 5TSP 5TSP5 5TSP7 5TSP9 5TSP5 5TSP55 TSP TSP TSP 5 TSP 5 TSP TSP 7 TSP TSP TSP 9 TSP 7 TSP 30 TSP 3 TSP 3 TSP 33 TSP TSP 3 TSP 9 TSP 35 TSP 99 TSP 00 TSP 0 TSP 0 TSP 03 TSP 0 TSP 05 TSP 07 TSP 09 TSP TSP 5 TSP 0 TSP TSP TSP 3 TSP TSP 5 TSP 7 TSP 9 TSP 5 TSP 55 (9,53) (9,53) (9,53) (9,53) / (,70) / (,70) / (,70) / (,70) / (,70) / (,70) / (,70) / (,70) / (,70) / (,70) / (,70) / (,70) / (,70) / (,70) 3/ (,7) 3/ (,7) 3/ (,7) 3/ (,7) 3/ (,7) 3/ (,7) 3/ (,7) 3/ (,7) 3/ (,7) 3/ (,7) 3/ (,7) 3/ (,7) 3/ (,7) 3/ (,7) 3/ (,7) 3/ (,7) 3/ (,7) 3/ (,7) 3/ (,7) 3/ (,7) 3/ (,7) / / 5/3 3/ 5/ 7/ / 3/ 5/ 7/ / (5,) (9,05) (,) (5,0) (,35) (9,53) (,70) (5,) (9,05) (,) (5,0) (,35) (9,53) (,70) (5,) (9,05) (,) (5,0) (3,97) (,7) (,35) (7,9) (9,53) (,) (,70) (5,) (9,05) (,) (5,0) (,7) (,35) (7,9) (9,53) (,) (,70) (5,) (9,05) (,) (5,0) 0-3**** 0-3**** 0-3**** 0-3**** 0-3**** 0-3**** 0-3**** 0-3**** 0-3**** 0-3**** 0-3**** *NOTE THESE ITEMS AE AVAILABLE IN TIC THEADS. -0* Available in M3 Thread -3** Available in M3.5 Thread -3*** Available in M Thread 0-3**** Available in M5 Thread To order metric threads, simply add an M to the Part Number. EXAM PLE: 5TSP00 with a -3 Thread, Becomes 5MTSP00 with a M3.5 Thread mpsales@microplastics.com micro plastics, inc. WEBSITE: 79

80 PEVIOUS PAGE O CON TEN TS SPACES IN DEX A-Z V Self-threading, use with tapping screws designed for plastics. HEX NYLON SPACES SEL ITEM TAPPING NUMBE DESCIPTION ID SCEW L A 35HSP 35HSP3 35HSP0 35HSP0 35HSP 35HSP03 35HSP 35HSP9 35HSP0 35HSP 35HSP05 35HSP0 35HSP07 35HSP0 35HSP0 35HSP09 35HSP7 35HSP0 35HSP00 35HSP0 35HSP00 35HSP09 35HSP003 35HSP0 35HSP09 35HSP00 35HSP0 35HSP005 35HSP03 35HSP035 35HSP00 35HSP007 35HSP00 35HSP00 35HSP009 35HSP07 35HSP00 35HSP03 35HSP0 35HSP0 35HSP03 35HSP0 35HSP0 35HSP0 35HSP05 35HSP0 35HSP5 35HSP309 35HSP07 35HSP33 35HSP00 HSP HSP 3 HSP 0 HSP 0 HSP HSP 03 HSP HSP 9 HSP 0 HSP HSP 05 HSP 0 HSP 07 HSP 0 HSP 0 HSP 09 HSP 7 HSP 0 HSP HSP HSP HSP 9 HSP 3 HSP HSP 9 HSP HSP HSP 5 HSP 3 HSP 35 HSP HSP 7 HSP HSP 0 HSP 9 HSP 7 HSP 0 HSP 3 HSP HSP HSP 3 HSP HSP HSP HSP 5 HSP 0 HSP 5 HSP 309 HSP 07 HSP 33 HSP oo.07 (,3).075 (,9).09 (,3).09 (,3).09 (,3).09 (,3).09 (,3).09 (,3).09 (,3).09 (,3).09 (,3).5 (,9).5 (,9).5 (,9).5 (,9).5 (,9).5 (,9).5 (,9).09 (,3).09 (,3).09 (,3).09 (,3).09 (,3).09 (,3).09 (,3).09 (,3).09 (,3).09 (,3).09 (,3).5 (,9).5 (,9).5 (,9).5 (,9).5 (,9).5 (,9).5 (,9).5 (,9).5 (,9).0 (3,5).0 (3,5).0 (3,5).0 (3,5).0 (3,5).0 (3,5).0 (3,5).5 (,9).5 (,9).0 (,7).5 (5,7).5 (,9).95 (,95) -0 9/ / 9/ 7/ / 5/ 7/ / 9/ -/ 3/ / - / / -/ 7/3-5/ / (9,53) (,) (,35) (9,53) (9,05) (,70) (,7) (5,) (,0) (,) (5,0) (,35) (9,53) (,70) (5,) (9,05) (,) (5,0) (,35) (7,9) (9,53) (,0) (,70) (,7) (5,) (9,05) (,) (5,0) (3,0) (,75) (,35) (9,53) (,70) (5,) (9,05) (,) (5,0) (3,75) (,35) (9,53) (,70) (5,) (9,05) (,) (5,0) (,70) (,5) (9,05) (5,5) (33,3) (,70) 3/ 3/ 3/ 3/ 3/ 3/ 3/ 3/ 3/ 3/ 3/ 3/ 3/ 3/ 3/ 3/ 3/ 3/ 5/ 5/ 5/ 0 TELEPHONE: (70) 53- / 53- micro plastics, inc. AX: (70) 53-7

81 PEVIOUS PAGE O CON TEN TS SPACES IN DEX A-Z HEX NYLON TAPPED SPACES V ITEM NUMBE DESCIPTION TAPPED L A HTST HTSP3 HTSP0 HTSP0 HTSP HTSP03 HTSP HTSP9 HTSP0 HTSP HTSP05 HTSP0 HTSP07 HTSP0 HTSP0 HTSP09 HTSP7 HTSP0 HTSP00 HTSP0 HTSP00 HTSP09 HTSP003 HTSP0 HTSP09 HTSP00 HTSP0 HTSP005 HTSP03 HTSP035 HTSP00 HTSP007 HTSP00 HTSP00 HTSP009 HTSP07 HTSP00 HTSP03 HTSP0 HTSP0 HTSP03 HTSP0 HTSP0 HTSP0 HTSP05 HTSP0 HTSP5 HTSP309 HTSP07 HTSP33 HTSP00 HTSP HTSP 3 HTSP 0 HTSP 0 HTSP HTSP 03 HTSP HTSP 9 HTSP 0 HTSP HTSP 05 HTSP 0 HTSP 07 HTSP 0 HTSP 0 HTSP 09 HTSP 7 HTSP 0 HTSP HTSP HTSP HTSP 9 HTSP 3 HTSP HTSP 9 HTSP HTSP HTSP 5 HTSP 3 HTSP 35 HTSP HTSP 7 HTSP HTSP 0 HTSP 9 HTSP 7 HTSP 0 HTSP 3 HTSP HTSP HTSP 3 HTSP HTSP HTSP HTSP 5 HTSP 0 HTSP 5 HTSP 309 HTSP 07 HTSP 33 HTSP * -0* -0* -0* -0* -0* -0* -0* -0* -3** -3** -3** -3** -3** -3** -3** -0* -0* -0* -0* -0* -0* -0* -0* -0* -0* -0* -3** -3** -3** -3** -3** -3** -3** -3** -3** -3*** -3*** -3*** -3*** -3*** -3*** -3*** -3** -3** -3** -0-3** -0 9/ / 9/ 7/ / 5/ 7/ / 9/ -/ 3/ / - / / -/ 7/3-5/ / (9,53) (,) (,35) (9,53) (9,05) (,70) (,7) (5,) (,0) (,) (5,0) (,35) (9,53) (,70) (5,) (9,05) (,) (5,0) (,35) (7,9) (9,53) (,0) (,70) (,7) (5,) (9,05) (,) (5,0) (3,0) (,75) (,35) (9,53) (,70) (5,) (9,05) (,) (5,0) (3,75) (,35) (9,53) (,70) (5,) (9,05) (,) (5,0) (,70) (,5) (9,05) (5,5) (33,3) (,70) 3/ 3/ 3/ 3/ 3/ 3/ 3/ 3/ 3/ 3/ 3/ 3/ 3/ 3/ 3/ 3/ 3/ 3/ 5/ 5/ 5/ *NOTE THESE ITEMS AE AVAILABLE IN TIC THEADS. On Threaded Spacers "and longer, tap is "from each end and not continuous through. NOTE: To order metric threads, simply add an M to the Part Number. EXAM PLE: HTSP0 with a -3 Thread, -0* Available in M3 Thread -3** Available in M3.5 Thread -3*** Available in M Thread mpsales@microplastics.com micro plastics, inc. WEBSITE:

82 PEVIOUS PAGE O CON TEN TS SPACES IN DEX A-Z V THEAD SIZE A B 3/ (,7) 3/ (,7) Minimum (,35) (,35) Minimum (9,53) (9,53) Minimum DEPTH O THEAD IN " BODY LENGTHS IS 3/" MINIMUM B = 7/3 B =.00 B =.70 M ALE-EM ALE NYLON THEADED STANDOS ITEM NUMBE DESCIPTION THEAD L 3M05 Standoff (,35) 3M037 3M050 3M00 3M0 3M075 3M07 3M00 3M 3M5 3M37 3M50 3M 3M75 3M00 3M 05 3M 037 3M 050 3M 05 3M 0 3M 075 3M 07 3M 00 3M 3M 5 3M 3 3M 37 3M 50 3M 3M 75 3M 00 3M 05 3M 037 3M 050 3M 0 3M 075 3M 07 3M 00 3M 3M 5 3M 37 3M 50 3M 3M 75 3M 00 Standoff Standoff Standoff Standoff Standoff Standoff Standoff Standoff Standoff Standoff Standoff Standoff Standoff Standoff Standoff Standoff Standoff Standoff Standoff Standoff Standoff Standoff Standoff Standoff Standoff Standoff Standoff Standoff Standoff Standoff Standoff Standoff Standoff Standoff Standoff Standoff Standoff Standoff Standoff Standoff Standoff Standoff Standoff Standoff / (,70).00 (5,) (5,) (9,05) (,) (5,0) / (,5) (3,75) (3,93) / (3,0) (3,) (,5) (50,0) / (,70) 9/ (,7) (5,) (9,05) (,) (5,0) / (,5) (3,75) 5/ (33,3) (3,93) / (3,0) (,) (,5) (50,0) (9,53) (,35) (9,53) (,35) (9,53) / (,70) (5,) (9,05) (,) (5,0) / (,5) (3,75) (3,93) / (3,0) (,) (,5) (50,0) HIGHWAY 7 NOTH micro plastics, inc. LIPPIN, AKANSAS 73

83 PEVIOUS PAGE M OLDED PLASTIC DOWELS O CON TEN TS ITEM NUMBE DESCIPTION O.D. LENGTH (,9) / (3,) (,9) (,35) (,9) (9,53) (,9) / (,70) (,57) / (3,) (,57) (,35) (,57) (9,53) (,57) / (,70) (,3) / (3,) (,3) (,35) (,3) (9,53) (,3) / (,70) (3,) / (3,) (3,) 3/ (,7) (3,) (,35) (3,) (9,53) (3,) / (,70) (,75) / (3,) (,75) (,35) (,75) (9,53) (,75) / (,70) (,75) (9,05) (,) - (3,75) (5,33) / (,70) (,35) / (3,) (,35) (,35) (,35) (9,53) (,35) / (,70) (,35) (9,05) (7,9) / (3,) (7,9) (,35) (7,9) (9,53) (7,9) / (,70) (7,9) (5,) (7,9) (9,05) (,0) (,35) NYLON SPECIAL SNAP-IN STANDO SPACES IN DEX A-Z Uses include dowel pins, stop pins, insulating spacers, switch actuators, and keys. Natural color acetal plastic is standard though they may be molded of other materials. Other lengths are available. V ITEM NUMBE PANEL THICKNESS HOLE SIZE L OD ID 3SS00309 /" (,5).7 (,75).95 (,0) " (,35).0 (,9) 3SS0005 /" (,5).3 (5,95) " (,35) 9/3" (7,).53 (3,9) 3SS00037 /" (,5).3 (5,95) " (9,53) 9/3" (7,).53 (3,9) 3SS00037 /" (,5).3 (5,95) " (9,53) 9/3" (7,).9 (,9) 3SS00050 /" (,5).3 (5,95) /" (,70) 9/3" (7,).9 (,9) TELEPHONE (70) 53- / 53- micro plastics, inc. AX (70)

84 PEVIOUS PAGE O CON TEN TS IN DEX A-Z PANEL ASTENES AND HOLE PLUGS VI NYLON MINI IVETS Micro Plastics' Mini ivets consist of a male and female component. Mini ivets are used to fasten a variety of materials. Simply press together for fast, easy assembly. Male and female rivets are packaged and sold separately. Mini ivets are molded in natural Nylon / but are available in black upon request. PAT NUMBE DESCIPTION PANEL THICKNESS A B POST DIATE 7M M0000 7M M0000 7M M MM0005 7MM000 7MM00075 MALE MINI IVET MALE MINI IVET MALE MINI IVET MALE MINI IVET MALE MINI IVET MALE MINI IVET.00 (0,5).00 (0,5).030 (0,7).05 (,).0 (,57).075 (,9) " (,35) " (,35) " (,35) " (,35) " (,35) " (,35).050 (,7).050 (,7).050 (,7).050 (,7).050 (,7).050 (,7).00 (,5).00 (,5).00 (,5).00 (,5).00 (,5).00 (,5) MALE MINI IVET *7M 0 EMALE MINI IVET * O USE WITH ALL.00 MALE IVETS " (,35).050 (,7).00 (,5) PAT NUMBE DESCIPTION PANEL THICKNESS A B POST DIATE 7M M M M MM MM0900 7MM MM MALE MINI IVET MALE MINI IVET MALE MINI IVET MALE MINI IVET MALE MINI IVET MALE MINI IVET (0,5) (0,) (,) (,57) (,9) (,9) " " " " " " (9,53) (9,53) (9,53) (9,53) (9,53) (9,53) (,9) (,9) (,9) (,9) (,9) (,9) (,39) (,39) (,39) (,39) (,39) (,39) EMALE MINI IVET *7M 09 EMALE MINI IVET * O USE WITH ALL.090 MALE IVETS " (9,53).075 (,9).09 (,39) PAT NUMBE DESCIPTION PANEL THICKNESS A B POST DIATE 7M M503 7M M505 7M M50 7M M5093 7M M55 7M M57 7M M535 *7M MALE MINI IVET MALE MINI IVET MALE MINI IVET MALE MINI IVET MALE MINI IVET MALE MINI IVET MALE MINI IVET EMALE MINI IVET (0,) (,) (,57) (,3) (3,) (,75) (,) /" (,70) /" (,70) /" (,70) /" (,70) /" (,70) /" (,70) / (,70) /" (,70) (,5) (,5) (,5) (,5) (,5) (,5) (,5) (,5) (3,) (3,) (3,) (3,) (3,) (3,) (3,) (3,) * O USE WITH ALL.5 MALE IVETS ADJUSTABLE MALE MINI IVET PAT NUMBE DESCIPTION COVES A ANGE OM 7AM 57 ADJUSTABLE MALE IVET / to 5/ * O USE WITH \7M EMALE MINI IVET TELEPHONE (70) 53- / 53- micro plastics, inc. AX (70) 53-7

85 PEVIOUS PAGE O CON TEN TS IN DEX A-Z PANEL ASTENES AND HOLE PLUGS VI Micro Plastic's Tubular Emblem Clips or Speed Nut Clips offer a low substitute to the expensive all metal or metal/rubber clips. These easily installed molded low density polyethylene clips eliminate paint and surface damage. The inevitable rust associated with the sharp metal parts they replace is also eliminated by the electrically insulating, non-cathodic plastic clip. TUBULA EMBLEM CLIPS ITEM NUMBE DESCIPTION A B C D E L 0TC550 / X.50 TUBE CLIP / TC5500 5/3 X.00 TUBE CLIP / TC5530 5/3 X.30 TUBE CLIP / TC5500 5/3 X.00 TUBE CLIP / TC55 5/3 X. TUBE CLIP / mpsales@microplastics.com micro plastics, inc. WEBSITE: 5

86 VI PANEL ASTENES AND HOLE PLUGS NYLON GOET NUTS Micro Plastics' Open Poly Grommet Nuts provide a low cost, positive connection of thin gauge materials while they eliminate cross threading. The specially designed locks snap into a prepunched square hole. As the self-threading sheet metal screw is tightened, the Poly Grommet expands and securely locks the screw and assembled parts in place. The Grommet will provide a corrosion and vibration resistant connection and can be used to insulate areas of an assembly from electrical and thermal transfer. Some of the more common sizes that we have initially tooled are shown below. Because of unique tooling approach, we can vary this design over a wide range. equest the size you need. Poly Grommets are molded in Nylon / and can be dyed or molded in various colors. Different plastic materials can be substituted. Naturally, changes in our standard product will involve additional costs. Let us know what you need. Q TABLE PEVIOUS PAGE O CON TEN TS IN DEX A-Z SQUAE HEAD PAT NUMBE HOLE SIZE THICKNESS ANGE SCEW HEAD SIZE "B" HEIGHT "A" LENGTH "C" 0SGN /.90 (,99/7,37).03/.5 (0,79/3,) -0 (9,53).03 (0,79).30 (,3) 0SGN /.90 (,99/7,37).03/.5 (0,79/3,) (9,53).0 (,57).30 (,3) 0SGN /.90 (,99/7,37).03/.5 (0,79/3,) (9,53).5 (3,).30 (,3) 0SGN /.90 (,99/7,37).03/.5 (0,79/3,) -0 (9,53).50 (,35).30 (,3) 0SGN (9,53).03/.5 (0,79/3,) (5,) -/ (7,0) 9/3 (7,) 0SGN /.0 (,35/,).03/.5 (0,79/,9).35 (,05).09 (,39).0 (5,59) 0SGN /.70 (,/,).0/.75 (,57/,99).375/.500 (9,53/,70).03 (0,79).35 (,05) 0SGN009.5/.55 (5,7/,).03/.5 (0,79/3,).375 (9,53).7 (,75).300 (7,) 0SGN0095.5/.55 (,/,).03/.5 (0,79/3,) - (9,53) /3 (0,79) 9/3 (7,) 0SGN /.55 (,35/,).0/.5 (,79/3,).375 (9,53).03 (0,79).5 (,73) 0SGN00.73/.7 (,39/,5).03/.07 (0,79/,9). (5,5).50 (,35). (5,5) 0SGN00.50/.70 (,35/,).0/.55 (,57/3,9).375 (9,53).03 (0,).3 (7,9) 0SGN00.5 (7,).07/.75 (,9/,5).30 (9,5).05 (,).30 (,) 0SGN000.75/.0 (,99/7,).00/.05 (,0/,) (9,0).03 (0,).330 (,3) 0SGN0.350/.355 (,9/9,0)./.30 (5,5/5,) (,07).0 (,57). (0,9) 0SGN05.370/.390 (9,0/9,9).0/.7 (,57/,75) 0.09 (5,7).05 (,).90 (7,37) 0SGN0.305/.35 (7,7,00).03/.75 (0,79/,).70 (,9).00 (,5).300 (7,) 0SGN /.375 (9,0/9,5).03/.00 (0,79/,5).0 (5,75).00 (,03).75 (,9) 0SGN035.73/.7 (,39/,5).03/.07 (0,79/,9). (5,5).050 (,7). (5,5) 0SGN05.70/.30 (,5/7,7).03/.70 (0,79/,3).05 (0,9).0 (,57).3 (7,9) 0SGN050.30/.30 (7,7/7,7).03/.70 (0,79/,3) 0.5 (,).0 (,57).95 (7,9) 0SGN05.30/.30 (,,3).03/.55 (0,79/3,9) 0.50 (,5).07 (,3).305 (7,75) 0SGN055.5/.70 (,/,5).07/.095 (,9/,).375 (9,5).03 (0,).0 (,07) 0SGN00.335/.30 (,5/,).0/.5 (,5/3,7).5 (,9).075 (,90).35 (,00) 0SGN05.70/.70 (,/,).0/.5 (,5/3,7).390 (9,90).050 (,7).75 (,99) 0SGN070.75/.5 (,90/7,).03/.5 (0,79/3,7).375 (9,53).050 (,7). (5,5) 0SGN07.00/.70 (5,0/,).03/.5 (0,/3,9).3/.37 (7,93/,).035 (0,9).3 (7,93) 0SGN075.75/.0 (,99/7,).0/.0 (,0/3,05).390 (9,90).055 (,0). (7,) 0SGN07.0/.70 (,/,).093/.7 (,3/,75).0 (0,).00 (,0).30 (7,7) 0SGN07.75 (,99).07/.0 (,9/,57).375 (9,53).03 (0,).37 (,3) 0SGN /.5 (9,0)/(,30).0/.0 (,9/,57) (5,).00 (,0) 9/3 (7,) 0SGN00.370/.375 (9,0/9,50).0/.0 (,0/3,05).5 (5,90).00 (,0). (7,) 0SGN0.0/.0 (0,/0,).03/.0 (0,79/,5).30 (,00).0 (3,5).0 (7,) 0SGN05.30/.335 (,0/,5).03/.3 (0,/5,9) 0.70 (,9).055 (,0).0 (0,7) 0SGN /.35 (,,7).0/.7 (,5/,35) 0. (,).095 (,).00 (0,) 0SGN /.35 (,3/9,).03/.095 (0,/,).500 (,70).09 (,39).95 (7,50) 0SGN000.50/.0 (,35/,).0/.5 (,5/3,).375 (9,53).0 (3,5).5 (,73) TELEPHONE (70) 53- / 53- micro plastics, inc. AX (70) 53-7

87 PEVIOUS PAGE O CON TEN TS IN DEX A-Z PANEL ASTENES AND HOLE PLUGS VI DOUBLE SPLIT SQUAE HEAD PAT NUMBE HOLE SIZE THICKNESS ANGE SCEW HEAD SIZE "B" HEIGHT "A" LENGTH "C" 0SGN /.3 (9,5/9,70).5/.30 (3,/3,30) 0 39/ (5,).0 (,0).30 (7,) 0SGN005./.33 (5,79/5,9).50/.7 (,35/,).375 (9,53).03 (0,79).0 (0,3) 0SGN00.30/.35 (7,7/,00).0/.5 (,79/,9).37 (,0).07 (,9). (7,) 0SGN /.30 (7,75/7,7).5/.35 (3,/3,3).37 (,0).0 (,57). (7,) 0SGN00.375/.390 (9,53/9,9).30 (5,) (5,).00 (,03).3 (,3) 0SGN005.50/.50 (,35/,35).093/.75 (0,9/,99).375 (9,53).07 (,9).0 (0,7) 0SGN0.330/.330 (,3/,3).03/.5 (0,79/3,).505 (,3).03 (0,).75 (,9) 0SGN (7,70).03/.5 (0,79/3,) (,05).0 (,57).70 (,) OUND HEAD PAT NUMBE HOLE SIZE THICKNESS ANGE SCEW HEAD SIZE "B" HEIGHT "A" LENGTH "C" 0SGN /.0 (,/7,).0/.5 (,57/,9).375 (9,53).093 (,3).97 (7,5) 0SGN /.90 (,99/7,37).03/.5 (0,79/3,) (,70).03 (0,79).30 (,3) 0SGN000.7/.90 (,/7,37).03/.5 (0,79/3,) (,70).0 (,57).30 (,3) 0SGN000.7/.90 (,/7,37).03/.5 (0,79/3,) (,70).5 (3,).30 (,3) 0SGN /.90 (,99/7,37).03/.5 (0,79/3,) (,70).50 (,35).30 (,3) 0SGN /.90 (,99/7,37).03/.5 (0,79/3,9).500 (,70).375 (9,53).30 (,3) 0SGN /.90 (,99/7,37).03/.5 (0,79/3,9) (,70).70 (7,9).35 (,00) 0SGN /.5 (7,/7,).03/.50 (0,/3,) / (,70) 3/3 (,) /3 (,73) 0SGN /.90 (,99/7,37).03/.5 (0,79/3,9) (,0).03 (0,).35 (,) 0SGN00.75/.90 (,99/7,37).03/.09 (0,79/,77) (3,9).0 (,97). (7,) 0SGN0090./. (7,/7,).03/.09 (0,79/,77) -0.9 (,50).93 (7,0). (7,) 0SGN0.350/.355 (,9/9,7).03/.5 (0,/3,5).53 (3,3).5 (3,). (7,) 0SGN00.30/.30 (7,7/7,7).03/.0 (0,79/,0) (,70).035 (0,9).9 (7,) 0SGN000.5/.9 (0,0/0,90).03/.0 (0,79/,79) 5/.70 (,0).90 (,3).3 (7,9) 0SGN0300.5/.30 (0,5/0,9).03/.35 (0,/3,3).750 (9,05).0 (,57).30 (7,7) 0SGN000.35/.330 (,/,3).03/.5 (0,79/3,9) 0.55 (,35).0 (,57).30 (,3) 0SGN (,99).0/.70 (,57/,3).95 (,57).3 (7,9).35 (,) THEE LEGGED SQUAE HEAD (its ound Hole) PAT NUMBE HOLE SIZE THICKNESS ANGE SCEW HEAD SIZE "B" HEIGHT "A" LENGTH "C" 0SGN /.300 (7,/7,).03/.35 (0,7/3,3).5 (,3).055 (,0).5 (,73) CLOSED PAT NUMBE HOLE SIZE THICKNESS ANGE SCEW HEAD SIZE "B" HEIGHT "A" LENGTH "C" 0SGN00** 0SGN00*.5/.0.355/.355 (,73/7,) (9,0/9,0).075/.5.0/.350 (9,0/3,) (,57/,) (,5) (7,7) (,) (,7).50.5 (,3) (7,0) *OUND HEAD **SQUAE HEAD mpsales@microplastics.com micro plastics, inc. WEBSITE: 7

88 PEVIOUS PAGE O CON TEN TS IN DEX A-Z PANEL ASTENES AND HOLE PLUGS VI Micro Plastics' Poly Grommets provide a low cost, positive connection for thin gauge materials while they eliminate the chance of cross-threading. The specially designed closed Poly Grommet snaps into a pre-punched square hole. As the self-threading sheet metal screw is tightened, the Poly Grommet expands and securely locks the screw and assembled parts in place. The metal screw is encapsulated by the Grommet, insulating it from electrical wiring and tubing while it guards against thermal and moisture transfer. The sizes shown were tooled initially for some of the more common applications. Micro Plastics, because of our unique tooling approach, can vary these designs over a very wide range. equest the size you need. We are very flexible. Poly Grommets can be dyed or molded in various colors. Different plastic materials can be substituted. Naturally, changes from our standard product will incur additional cost. Let us know what you need. NYLON CLOSED SCEW STANDAD GOM M ET NUTS PAT NUMBE HOLE SIZE PANEL THICKNESS ANGE SCEW SIZE HEAD SIZE "B" HEIGHT "A" LENGTH "C" (+/-.05) 0SGC SGC SGC SGC SGC SGC SGC SGC SGC / NYLON CLOSED SCEW SPACE GOET NUTS PAT NUMBE SPACE LENGTH SPACE OD HOLE SIZE PANEL THICKNESS ANGE SCEW SIZE LOCK LENGTH "C" (+/-.05) 0SPG " SPG " SPG " SPG " SPG " SPG " NYLON "SPECIAL ITEM "GOM M ET NUTS PAT HOLE PANEL THK. SCEW HEAD HEAD LOCK NUMBE SIZE ANGE SIZE SIZE "B" HEIGHT "A" LENGTH "C" /.50.05/ PAT NUMBE PAT NUMBE PAT NUMBE C TELEPHONE (70) 53- / 53- micro plastics, inc. AX (70) 53-7

89 PEVIOUS PAGE O CON TEN TS IN DEX A-Z PANEL ASTENES AND HOLE PLUGS NYLON SPIN CLIPS - This design combines the advantages of a push-in type fastener with a screw. or fast assembly, the part can be pushed into a -0 threaded hole, and then screwed in for a tighter fit, or screwed out for disassembly. VI This part will also function as a standard in Clip for use in a unthreaded hole with a diameter of approximately 3/" PAT NUMBE DESCIPTION 7SC50H037-0 X " 7SC50H050-0 X /" 7SC50H0-0 X " 7SC50H075-0 X " 7SC50H00-0 X " Slotted HEX Head PAT NUMBE DESCIPTION 7SC50K037-0 X " 7SC50K050-0 X /" 7SC50K0-0 X " 7SC50K075-0 X " 7SC50K00-0 X " Unslotted KNULED Head PAT NUMBE DESCIPTION 7SC X " 7SC X /" 7SC500-0 X " 7SC X " 7SC X " Slotted OUND Head.50 DIA PAT NUMBE DESCIPTION 7SC50P037-0 X " 7SC50P050-0 X /" 7SC50P0-0 X " 7SC50P075-0 X " 7SC50P00-0 X " Slotted PAN Head.75 DIA NYLON "SPECIAL ITEM "GOM M ET NUTS PAT NUMBE PAT NUMBE PAT NUMBE PAT NUMBE PAT NUMBE PAT NUMBE mpsales@microplastics.com micro plastics, inc. WEBSITE: 9

90 PEVIOUS PAGE O CON TEN TS IN DEX A-Z PANEL ASTENES AND HOLE PLUGS VI Micro Plastics' Push-in asteners provide an inexpensive, fast, convenient method to join plastic, light sheet metal, insulating materials, circuit boards, or any other thin, light-weight material. They can also be used as push-in glides or as bumpers. Special designed legs provide compression and expansion to lock fastener into pre-punched holes. These fasteners are vibration, abrasion and corrosion resistant, and feature large heads for easier assembly, and can be used over and over. NYLON PUSH-IN-ASTENES PAT NUMBE DESC. H A B C D L 7PI003 7PI00 7PI005 7PI007 7PI00 7PI009 7PI000 7PI00 7PI00 7PI003 7PI00 7PI005 7PI00 7PI007 7PI00 7PI009 7PI003 7PI003 7PI0033 7PI003 7PI0035 7PI003 7PI0037 7PI003* 7PI0039 7PI000* 7PI00* 7PI00 7PI003 7PI00 7PI005 7PI00 7PI007 7PI00 7PI009 7PI0050 7PI005 7PI005 7PI0053 7PI005 7PI0055 7PI005 7PI0057 7PI005 7PI0059 7PI000 7PI00 7PI00 7PI003 7PI00 7PI005 7PI00 PI 3 PI PI 5 PI 7 PI PI 9 PI 0 PI PI PI 3 PI PI 5 PI PI 7 PI PI 9 PI 3 PI 3 PI 33 PI 3 PI 35 PI 3 PI 37 PI 3* PI 39 PI 0* PI * PI PI 3 PI PI 5 PI PI 7 PI PI 9 PI 50 PI 5 PI 5 PI 53 PI 5 PI 55 PI 5 PI 57 PI 5 PI 59 PI 0 PI PI PI 3 PI PI 5 PI 3/ (9,53). (,30) / (,33) /3 (,73) 3/ (5,) (,35) 5/ (5,95). (,7) / (,70) 3/ (,75) 9/3 (5,0) 5/ (5,95) 5/ (5,95) (9,5) /3 (,73) 3/ (5,) 5/ (9,93) 3/ (5,) (9,5) (9,05) 5/ (7,9) 3/ (,75) (9,5) 9/3 (7,) (,35) 9/3 (7,) 5/ (7,9) 3/ (5,) 3/ (5,) 3/ (5,) 3/ (5,) 3/ (5,) 3/ (5,) 5/ (9,93) /3 (,73) /3 (,73) /3 (,73) /3 (,73) /3 (,73) /3 (,73) /3 (,73) 9/ (3,5) 7/ (,0) 5/3 (,90) 3/ (,75) 5/3 (,90) /3 (,73) 5/ (9,93) 9/ (,5) 9/ (,5) 9/3 (5,0) 9/ (,5).533 (3,5).3 (0,5).030 (0,7).30 (3,30).30 (5,).5 (,30).00 (,03).00 (5,0).0 (,3).075 (,9).35 (9,7).00 (5,5).00 (,03).0 (,97).75 (,3).0 (5,33).503 (,7).35 (5,97).505 (,3).3 (,5).5 (3,).0 (,).3 (,5).03 (,0).5 (,9).093 (,3). (3,07).90 (,3).5 (3,9).35 (3,3).35 (5,97).50 (,35). (3,07).35 (,00).50 (,3).5 (3,).05 (,5).55 (,). (,5).97 (5,00).555 (,0).35 (,00).0 (3,05). (3,07).5 (3,9).5 (3,9).370 (9,0).730 (3,9).7 (7,0).300 (7,).0 (,9).330 (,3).07 (,).0 (3,5).30 (3,30).0 (,0).09 (,9).05 (,).00 (,03).05 (,5).5 (,70).00 (,5).7 (,75).0 (,0).070 (,7).77 (,50).7 (,).09 (,3).0 (5,33).0 (,).30 (3,30).0 (,57).070 (,7).075 (,9).0 (,57).07 (,9).05 (,).07 (,9).05 (,).090 (,9).35 (3,3).35 (3,3).070 (,79).0 (,9).05 (,7).3 (,7).0 (,0).37 (3,).37 (3,).53 (3,9).7 (,).5 (,70).5 (3,).075 (,9).55 (,).53 (3,).05 (,5).5 (3,).05 (,7).0 (5,33). (3,).70 (,3).7 (,75).5 (,9).30 (3,30). (3,). (,).00 (5,0).5 (3,9).5 (3,).0 (,57).0 (,).0 (7,).50 (3,).95 (7,9). (,7).0 (,57).0 (5,3). (5,9).79 (,55).95 (7,9).5 (3,).00 (5,0).0 (5,59).0 (,0).00 (,5).0 (5,59).00 (,5).5 (3,).05 (,7).5 (3,).0 (,57).0 (3,5).0 (3,5).37 (3,).5 (3,).5 (3,).0 (5,).00 (5,0).0 (5,3).0 (5,3).5 (5,7). (5,9).95 (7,9).5 (5,7).35 (3,3).30 (9,5).3 (,05).05 (,). (5,79).3 (5,99).95 (7,9).95 (7,9).95 (7,9).93 (7,).95 (7,9).095 (,).0 (,79).5 (3,).0 (,0). (3,5).095 (,). (3,5).00 (,03).3 (,7).0 (3,05).5 (,). (3,5). (3,5).5 (,9).75 (,5).30 (3,30).30 (5,).5 (,9).30 (3,30).0 (,57).09 (,).090 (,9).0 (,57).093 (,3).093 (,3).093 (,3).09 (,).30 (3,30).5 (,9).5 (,9).5 (,9).5 (,9).5 (,9).57 (3,99).0 (,0).5 (,9).5 (,9).0 (,57).75 (,5).55 (,).0 (,57).095 (,).305 (7,7).00 (5,0).090 (,9).00 (5,05).03 (5,).30 (5,).0 (,0).0 (,0).5 (,).0 (,0) * SLOT IS MISSING ON PI 0 AND PI "L" DINSION (total length) = +/-.05"..75 (7,5).07 (5,3).00 (5,0).70 (,).370 (9,0).590 (,99).00 (5,0).97 (7,5).370 (9,0).90 (,3).5 (7,0).3 (,70).05 (5,).303 (,3).5 (,3).3 (,9).03 (7,5).3 (,).705 (7,9).75 (,3).35 (5,9).79 (,55).75 (,).5 (,9).0 (,0).00 (5,0). (,5).30 (,3).30 (,3).95 (7,9).35 (,7).395 (0,03).0 (,0). (,0).0 (7,7).305 (7,75).35 (,).70 (9,).90 (,5).5 (0,5).770 (9,5).50 (,3).5 (,3).3 (,).55 (,).333 (,).50 (3,7).00 (5,05).0 (,).535 (3,59).70 (,9).555 (,0) 90 TELEPHONE (70) 53- / 53- micro plastics, inc. AX (70) 53-7

91 PEVIOUS PAGE O CON TEN TS IN DEX A-Z PANEL ASTENES AND HOLE PLUGS NYLON PUSH-IN-ASTENES PAT NUMBE DESC. H A B C D L 7PI007 7PI00 7PI009* 7PI0070 7PI007 7PI007 7PI0073 7PI007 7PI0075 7PI007 7PI0077 7PI007 7PI0079 7PI000 7PI00 7PI00 7PI003 7PI00 7PI005 7PI00 7PI007 7PI00 7PI009 7PI0090 7PI009 7PI009 7PI0093 7PI009 7PI0095 7PI009 7PI0097 7PI009 7PI0099 7PI000 7PI00 7PI00 7PI00 7PI005 7PI00 PI 7 PI PI 9 PI 70 PI 7 PI 7 PI 73 PI 7 PI 75 PI 7 PI 77 PI 7 PI 79 PI 0 PI PI PI 3 PI PI 5 PI PI 7 PI PI 9 PI 90 PI 9 PI 9 PI 93 PI 9 PI 95 PI 9 PI 97 PI 9 PI 99 PI 00 PI 0 PI 0 PI 0 PI 05 PI 0 / (,70) / (7,5).3 (7,9) 9/3 (5,0) 9/3 (5,0) 9/3 (5,0) /3 (,73) 9/3 (5,0) (,35) 5/3 (,90) 5/ (5,95) 3/3 (0,3) 9/ (,9) (9,53).33 (,7) / (7,5) / (,70) / (,70) / (,70) / (,70) / (,70) / (,70) / (,70) / (,70) / (,70) / (,70) / (,70) / (,70) 9/3 (5,0) / (,70) / (,70) / (,70) / (,70) (9,53).0 (7,).300 (7,) 5/ (0,3) (5,).30 (9,5).7 (,3).0 (3,5).095 (,).7 (,3).50 (,35).35 (9,7).7 (,3).05 (0,9).550 (3,97).9 (3,).30 (,3).50 (,35).950 (,3).5 (5,).5 (3,).50 (,35).0 (,3).099 (,5).7 (3,3).5 (3,9).9 (,0).9 (5,5).50 (,35). (7,).3 (7,9).35 (,7).375 (9,53).05 (0,9).30 (3,30). (,).9 (,5).3 (,3).00 (5,9).53 (39,9).5 (3,9).050 (,7).750 (9,05).05 (7,05).30 (,).7 (,75).55 (,).075 (,9).7 (,75).7 (,75).7 (,75).7 (,75).0 (,0).35 (3,3). (3,7).0 (,3).00 (,5).7 (,).7 (,3).37 (3,).55 (,).3 (3,5). (,7).77 (,50).70 (,3).5 (3,).7 (,5).75 (,5).7 (,7).5 (3,).77 (,50).75 (,5).75 (,5).5 (3,).7 (,5).7 (,7).7 (,7).30 (9,5).05 (5,).55 (,).37 (3,).0 (,0).30 (9,).0 (,57).95 (7,9).30 (9,).5 (3,).95 (7,9).300 (7,).90 (7,37).95 (7,9).35 (,00).5 (3,).3 (,05).5 (3,).7 (7,0). (5,79).0 (5,3).0 (5,3).30 (9,).0 (7,).0 (7,). (7,). (7,).7 (7,0).77 (7,0).3 (7,9).0 (7,). (7,). (7,). (7,). (7,).05 (5,).0 (7,).0 (7,). (7,).75 (,07).95 (7,9).37 (,).0 (5,3). (,7).30 (9,).0 (5,59).0 (,0).90 (7,37).095 (,).0 (,0).5 (,).5 (,).0 (,0).75 (,99). (,).97 (5,00). (3,00).7 (5,5).7 (,37).5 (,9).5 (,9).90 (7,37).3 (,7).5 (,). (,). (,5). (,).39 (,07). (,).0 (,0). (,).0 (,0). (,5).3 (,7).5 (3,).0 (,0).0 (,0).0 (,0).350 (,9).50 (,35).5 (7,).5 (,9).0 (3,05).70 (,).0 (,57).05 (0,9). (,9). (5,5). (0,).97 (,). (5,0).30 (9,5).0 (5,75).75 (,9).399 (0,3).37 (,0).395 (0,03).0 (30,).35 (3,7).3 (7,7).55 (,). (,5).3 (,3).3 (9,7).30 (9,5).395 (0,03).5 (,30).7 (,37).53 (3,03).50 (3,).57 (,).09 (5,7).3 (,).305 (7,75).70 (7,).73 (,).7 (7,07).0 (37,0).75 (7,3).73 (,0).337 (,5).75 (,3).50 (3,0).50 (,73) VI Micro Plastics' Push-in asteners provide an inexpensive, fast, convenient method to join plastic, light sheet metal, insulating materials, circuit boards, or any other thin, light-weight material. They can also be used as push-in glides or as bumpers. Special designed legs provide compression and expansion to lock fastener into pre-punched holes. These fasteners are vibration, abrasion and corrosion resistant, and feature large heads for easier assembly, and can be used over and over. NYLON "SPECIAL ITEM" PUSH-IN-ASTENES PAT NUMBE mpsales@microplastics.com micro plastics, inc. WEBSITE: 9

92 PEVIOUS PAGE O CON TEN TS IN DEX A-Z PANEL ASTENES AND HOLE PLUGS VI Micro Plastics' Arrow Clips are reusable, molded nylon fasteners that feature an inexpensive fast method to hand assemble metal, wood, plastic, composition or other thin-gauge materials. The specially designed body compresses as it is forced through a prepunched hole and springs back to its original shape to lock the assembled parts securely. The versatile clips can be disassembled and reused again and again. They provide an economical, electrical insulating, vibration, abrasion, and corrosion resistant connection. The following are some of the more common sizes. Because of Micro Plastics' unique tooling approach, designs can be varied over a wide range. equest the size you need. NYLON AOW CLIPS PNEUMATIC POWE TOOLS AE AVAILABLE O VOLU USES. PAT NUMBE DESC. HOLE SIZE PANEL THICKNESS ANGE HEAD DIA. D HEAD HEIGHT A LENGTH B CLIP DIA. C 7AC000 AC./.9 (,/,).0/.5 (,57/3,).30 (9,).00 (,5).00 (0,).5 (5,7) 7AC000 AC.3/.35 (3,33/3,3).0/.5 (,57/3,).70 (,).00 (,5).395 (0,03).0 (,0) 7AC0003 AC 3.5/. (3,/,09).0/.5 (,57/3,).0 (7,).00 (,0).390 (9,9).9 (,9) 7AC000 AC.5/. (3,/,09).0/.5 (,57/3,).0 (7,).00 (,03).00 (0,).0 (,57) 7AC0005 AC 5.3/.3 (5,/5,).5/.7 (3,/,75).370 (9,0).00 (,5).50 (3,7). (,30) 7AC000 AC./.9 (,/,).30/.330 (7,7/,3).370 (9,0).00 (,5).50 (3,7).5 (5,7) 7AC0007 AC 7.3/.3 (5,/5,).0/.5 (,57/3,).370 (9,0).00 (,5).50 (,3).5 (5,7) 7AC0009 AC 9.50/.0 (,39/,0).5/.7 (3,/,75). (,9).00 (,5).575 (,).90 (7,37) 7AC000 AC 0.0/.05 (,57/,5).00/.03 (0,5/0,79).00 (,5).00 (0,5).5 (3,).0 (,73) 7AC00 AC./.9 (,/,).5/.5 (,9/,70).375 (9,53).00 (,5).55 (3,33).0 (5,3) 7AC00 AC.95/.00 (,95/5,0).035/.05 (0,9/,5).370 (9,0).00 (,5).350 (,9).5 (5,7) 7AC003 AC 3.30/.3 (3,30/3,35).5/.0 (3,/3,5).70 (,).070 (,7).30 (7,7). (,) 7AC00 AC.5/.50 (3,/3,7).90/.300 (7,37/7,).70 (,).070 (,7).530 (3,).9 (,9) 7AC005 AC 5./. (3,00/3,0).0/.5 (,57/3,).0 (7,).00 (,5).390 (9,9).50 (3,7) 7AC00 7AC007 AC AC 7.50/.0 (,35/,0).30/.335 (,3/,50).30/.30 (9,/9,5).0/.30 (,57/,3).5 (5,).3 (7,35).05 (,5).070 (,7).0 (0,57).900 (,). (7,).375 (9,5) 7AC00 AC.0/.5 (,0/,9).03/.5 (0,/3,).0 (7,).00 (,03).00 (0,). (,7) 7AC009 AC 9.330/.30 (,3/,).5/.350 (3,/,).5 (7,5).070 (0,75).95 (,7).375 (9,53) 7AC000 AC 0.0/.35 (3,0/3,3).0/.5 (,5/3,).70 (,).00 (,0).330 (,3).0 (3,5) 7AC00 AC.50/.0 (,35/,57).5/.50 (3,/,35).500 (,70).050 (,7).30 (,0).0 (7,) 7AC00 AC.05/.090 (,/,9).03/.07 (0,/,7).5 (3,).030 (0,7).7 (,75).07 (,7) 7AC003 7AC00 AC 3 AC.335/.35 (,,7).50/.0 (,5/,0).0/.0 (,57/3,5).500/.750 (,7/9,). (,00).0 (5,9).050 (,7).0 (,73).5 (,3).35 (,3).33 (9,).7 (7,9) 9 TELEPHONE (70) 53- / 53- micro plastics, inc. AX (70) 53-7

93 PEVIOUS PAGE O CON TEN TS IN DEX A-Z PANEL ASTENES AND HOLE PLUGS VI Micro Plastics' Special Item Arrow Clips are designed to provide unique fasteners for assembly applications where larger panel thicknesses and or mounting diameters combined with increased fastening strength is required. Molded from UL 9V- Nylon for corrosion, abrasion and vibration resistance. NYLON "SPECIAL ITEM" AOW CLI PS PAT NUMBE 000 PAT NUMBE 000 PAT NUMBE 00 PAT NUMBE 00 PAT NUMBE 005 PAT NUMBE mpsales@microplastics.com micro plastics, inc. WEBSITE: 93

94 PEVIOUS PAGE O CON TEN TS IN DEX A-Z PANEL ASTENES AND HOLE PLUGS VI Micro Plastics' achet asteners are designed to provide and economical fastening method over a wide range of panel thicknesses and materials. The easy hand installation assures a quick assembly and a strong and reliable finished product. Parts are molded in Black Nylon / ACHET ASTENES PAT NUMBE HOLE SIZE PANEL THK. ANGE HEADSTYLE HEAD SIZE "B" HEAD HEIGHT "A" LOCK LENGTH "C" 7T (,75).05/.35 (0,/9,7) A.375 (9,53).070 (,7).500 (,70) 7T (,75).030/.330 (0,7/,3) B.35 (,05).0 (,73).5 (,7) *7T7700PPB.7 (,75).5/.50 (3,/,3) C.300 (7,).05 (,5).700 (7,7) 7T50.50 (,35).05/.300 (,7/7,) A.700 (7,7).00 (,5).37 (,0) 7T (,35).50/.535 (3,/3,5) A.700 (7,7).07 (,7).73 (,) 7T000. (7,3).093/.500 (,3/,70) A.5 (5,7).0 (,79).90 (,) * PAT MOLDED IN BLACK POLYPOPYLENE * HEAD WILL HAVE A TEXTUED INISH Designed for other hole sizes from / to and panel thicknesses from /3 to 3/. SNAP CLIPS A combination of Celcon Acetal material, and a resilient body design, give these parts a positive snap and more definate grip when assembled into place. PAT NUMBE A B D HOLE SIZE PANEL THICKNESS 7SNC (,5) (,35) (,35).5 (3,).03 (0,) 7SNC (,5) 9/3 (7,) (,35).5 (3,).0 (,57) 7SNC (,5) 5/ (7,9) (,35).5 (3,).093 (,3) 7SNC (,5) /3 (,73) (,35).5 (3,).5 (3.) 7SNC (,5) 9/3 (7,) 5/ (7,9).5 (3,9).03 (0,) 7SNC (,5) 5/ (7,9) 5/ (7,9).5 (3,9).0 (,57) 7SNC (,5) /3 (,73) 5/ (7,9).5 (3,9).093 (,3) 7SNC (,5) (9,53) 5/ (7,9).5 (3,9).5 (3,) 7SNC (,5) 3/3 (0,3) 5/ (7,9).5 (3,9).5 (3,9) 7SNC (,5) 5/ (7,9) 5/ (7,9).7 (,75).03 (0,) 7SNC (,5) /3 (,73) 5/ (7,9).7 (,75).0 (,57) 7SNC (,5) (9,53) 5/ (7,9).7 (,75).093 (,3) 7SNC (,5) 3/3 (0,3) 5/ (7,9).7 (,75).5 (3,) 7SNC (,5) 7/ (,) 5/ (7,9).7 (,75).5 (3,9) 7SNC (,5) 5/3 (,9) 5/ (7,9).7 (,75).7 (,75) 7SNC (,5) 5/ (9,93) /3 (,73).9 (5,5).03 (0,) 7SNC (,5) 7/ (0,7) /3 (,73).9 (5,5).0 (,57) 7SNC (,5) 9/ (,5) /3 (,73).9 (5,5).093 (,3) 7SNC (,5) 3/ (,30) /3 (,73).9 (5,5).5 (3,) 7SNC (,5) 33/ (3,) /3 (,73).9 (5,5).5 (3,9) 7SNC (,5) 35/ (3,9) /3 (,73).9 (5,5).7 (,75) 7SNC (,5) 3/3 (0,3) / (,70).50 (,35).03 (0,) 7SNC (,5) 7/ (0,7) / (,70).50 (,35).0 (,57) 7SNC (,5) 9/ (,5) / (,70).50 (,35).093 (,3) 7SNC (,5) 3/ (,30) / (,70).50 (,35).5 (3,) 7SNC (,5) 33/ (3,) / (,70).50 (,35).5 (3,9) 7SNC (,5) 35/ (3,9) / (,70).50 (,35).7 (,75) 9 TELEPHONE (70) 53- / 53- micro plastics, inc. AX (70) 53-7

95 PEVIOUS PAGE O CON TEN TS IN DEX A-Z PANEL ASTENES AND HOLE PLUGS VI NYLON KEY-HOLE CLIPS PAT NUMBE "H" HEAD DIAM ETE HOLE SIZE PANEL THICKNESS 7KY KY505 7KY505 7KY507 7KY509 7KY5050 7KY KY505 7KY505 7KY507 7KY50 7KY5050 7KY50 7KY503 7KY5033 7KY KY KY705 7KY705 7KY707 7KY709 7KY7050 " " " " " " 5/" 5/" 5/" 5/" 5/" 5/" 5/" 5/" 5/" 5/" 5/" 5/" 5/" 5/" 5/" 5/" (,35) (,35) (,35) (,35) (,35) (,35) (7,9) (7,9) (7,9) (7,9) (7,9) (7,9) (7,9) (7,9) (7,9) (7,9) (7,9) (7,9) (7,9) (7,9) (7,9) (7,9) (3,) (3,) (3,) (3,) (3,) (3,) (3,9) (3,9) (3,9) (3,9) (3,9) (3,9) (3,9) (3,9) (3,9) (3,9) (,75) (,75) (,75) (,75) (,75) (,75) (,3) (3,) (3,9) (,7) (5,5) (,35) (,3) (3,) (3,9) (,75) (5,5) (,35) (7,) (7,9) (,7) (9,53) (,3) (3,) (3,9) (,75) (5,5) (,35) 7KY /3" (,9).7 (,75).50 (,35) 7KY70 7KY703 7KY7033 7KY /" 5/" 5/" 5/" (7,9) (7,9) (7,9) (7,9) (,75) (,75) (,75) (,75) (7,) (7,9) (,7) (9,53) 7KY KY905 7KY905 7KY907 7KY909 7KY9050 7KY90 7KY903 /3" (,73) /3" (,73) /3" (,73) /3" (,73) /3" (,73) /3" (,73) /3" (,73) /3" (,73) (5,5) (5,5) (5,5) (5,5) (5,5) (5,5) (5,5) (5,5) (,3) (3,) (3,9) (,7) (5,5) (,35) (7,) (7,9) 7KY KY5005 7KY5005 7KY5007 7KY5009 7KY KY500 7KY5003 7KY KY KY5000 7KY KY500 7KY /" /" /" /" /" /" /" /" /" /" /" /" /" /" (,70) (,70) (,70) (,70) (,70) (,70) (,70) (,70) (,70) (,70) (,70) (,70) (,70) (,70) (,35) (,35) (,35) (,35) (,35) (,35) (,35) (,35) (,35) (,35) (,35) (,35) (,35) (,35) (,3) (3,) (3,9) (,75) (5,5) (,35) (7,) (7,9) (,7) (9,53) (0,3) (,0) (,9) (,70) This panel fastener incorporates a new design. The key-hole shaped interior allows the part to collapse more completely for easy assembly with finger pressure. Tapered, bullet-style point slides into hole easily. Angled panel lock section takes up slack in panels to provide for a tight assembly. The design allows for a relatively large clip diameter to hole size ratio, resulting in higher retention force. Parts can be tooled for a large variety of hole and panel variations. mpsales@microplastics.com micro plastics, inc. WEBSITE: 95

96 PEVIOUS PAGE O CON TEN TS IN DEX A-Z PANEL ASTENES AND HOLE PLUGS VI Micro Plastics' Poly ivets are one-piece nylon blind rivets that offer a fast economical, permanent, fastener that can be used in a wide variety of materials including sheet metal, plastic sheets, fiberglass, P.C. boards and composites. ast, easy installation can be made without tools from one side of the work piece. The rivet is inserted in a pre-punched hole and the drive pin is forced into the specially designed legs, with a drive rivet tool, which expand and securely locks the assembled components in place. The versatile Poly ivet provides a secure joint even under extreme vibration conditions while it electrically insulates and resists corrosion and cathodic transfer.the following are some of the more common sizes available. Because of Micro Plastics' unique tooling approach, designs can be varied over a wide range: diameter, head style and lengths can be adjusted to meet your requirements. Let us know what you need. NYLON POLY DIVE IVETS PAT NUMBE NOMINAL HOLE PANEL THICKNESS ANGE HEAD STYLE HEAD DIA. "A" HEAD HEIGHT "B" LOCK LENGTH "C" PIN DIA. "D" P (5,5).093/.350 (,3/9,53) ound.375 (9,53).00 (,03).50 (,3).0 (3,05) P (3,9).7/.50 (,75/,35) Binder. (5,5).050 (,7).3 (7,9).093 (,3) P0000. (5,5).09/.3 (,39/7,9) Binder.37 (,0).00 (,5). (,79).5 (3,) P (3,9)./.3 (5,5/7,9) Binder. (5,5).050 (,7).359 (9,).093 (,3) P (,75).0/.7 (,57/,75) Truss. (7,).050 (,7).9 (7,5).5 (3,) P (3,9)./.33 (5,5/9,73) Binder. (5,5).050 (,7). (0,9).093 (,3) P (,75).5/. (3,9/7,) Truss.30 (0,9).075 (,9).30 (9,5).5 (3,) P (,75).0/.5 (,57/3,) Binder.30 (0,9).0 (3,05). (5,5).5 (3,) P (,75).5/.7 (3,/,75) Truss.30 (0,9).075 (,9). (7,).5 (3,) P (,75).0/.7 (,57/,75) Truss.30 (0,9).075 (,9).5 (7,).5 (3,) P (,75).03/.00 (0,79/5,0) ound.75 (,9).075 (,9).95 (7,9).5 (3,) P (,75).3/. (7,9/,) Binder. (7,).075 (,9).535 (3,59).5 (3,) P (,75).0/.7 (,57/,75) ound. (7,).075 (,9).95 (7,9).5 (3,) P (,75).0/.5 (,57/3,) ound. (7,).075 (,9).30 (5,).5 (3,) P (,75).07/.375 (,9/9,53) ound. (7,).07 (,9).50 (,3).5 (3,) P (,75).3/. (7,9/,) ound.30 (,3).09 (,77).535 (3,59).5 (3,) P (,75).375/.500 (9,53/,70) Binder. (7,).00 (,03).5 (5,).5 (3,) P (,75).07/.375 (,9/9,50) ound.30 (,3).09 (,77).55 (,5).5 (3,) P (,99).0/.00 (,57/5,) ound.370 (9,0).00 (,03).0 (,).50 (3,) P (,75).375/.500 (9,53/,70) ound.30 (,3).09 (,77).09 (5,7).5 (3,) P30000*.7 (,75).375/.750 (9,53/9,05) ound.30 (,3).09 (,77).50 (,59).5 (3,) P (,35).350/.500 (,9/,70) Binder. (,9).00 (,03).0 (5,75).50 (3,) P (,35).350/.500 (,9/,70) ound.370 (9,0).00 (,03).0 (5,75).50 (3,) P (,35).5/.330 (3,9/,3) Binder. (,9).00 (,03).375 (9,53).55 (3,9) P (,35).093/.3 (,3/7,9) Binder. (,9).00 (,03).500 (,70).50 (3,) P (,75).3/. (7,9/,) Binder.3 (7,9).0 (,57).535 (3,59).5 (3,) P (,75).375/.500 (9,53/,70) Binder.35 (,00).0 (,57).09 (5,7).5 (3,) *P30000 WILL NOT WOK WITH DIVE IVET INSETION TOOLS /-.05 O LOCK LENGTH " C" 9 TELEPHONE (70) 53- / 53- micro plastics, inc. AX (70) 53-7

97 PEVIOUS PAGE O CON TEN TS IN DEX A-Z PANEL ASTENES AND HOLE PLUGS NYLON POLY DIVE IVETS VI PAT NUMBE NOMINAL HOLE PANEL THICKNESS ANGE HEAD STYLE HEAD DIA. "A" HEAD HEIGHT "B" LOCK LENGTH "C" PIN DIA. "D" P (,75).07/.375 (,9/9,53) Binder.3 (7,9).0 (,57).50 (,3).5 (3,) P (,).0/.550 (3,5/3,99) Binder.375 (9,53).00 (,5).5 (5,).50 (3,) P (,35).5/.37 (3,/,0) Binder. (,9).00 (,03).55 (,).50 (3,) P (,35).07/.75 (,9/,99) Button.9 (,55).305 (7,75).375 (9,53).55 (3,9) P (5,5).03/.0 (0,79/,57) Button.375 (9,53).3 (5,).70 (,3).5 (3,) P (,).30/.90 (3,30/7,37) Truss.0 (7,).050 (,7).30 (9,5).0 (3,05) P (,0).0/.0 (,57/,57) ound.95 (7,9).050 (,7).30 (5,).093 (,3) P (,75).5/. (3,9/7,) Truss.37 (,0).075 (,9).30 (9,5).5 (3,) P (,75).0/.7 (,57/,75) Truss.37 (,0).075 (,9).95 (7,9).5 (3,) P (5,7).5/.3 (3,/7,9) Truss.37 (,0).075 (,9). (,3).5 (3,) P (,35).0/.5 (,57/3,) ound.370 (9,0).00 (,03). (5,5).5 (3,) P (,35).093/.3 (,3/7,9) Truss. (,9).00 (,03).500 (,70).50 (3,) P (,35)./.500 (7,/,70) Truss. (,9).00 (,03).0 (5,75).50 (3,) P (,35).09/.5 (,77/3,9) ound / (,70) 5/ (7,9) (9,53).55 (3,9) P (3,).03/.0 (0,79/3,5) ound.7 (,75).07 (,9).90 (,3).075 (,9) P (3,).03/.0 (0,79/3,5) ound. (5,5).00 (,5).5 (5,7).075 (,9) P (5,5).7/.50 (,75/,35) Truss.375 (9,53).00 (,03).33 (,7).0 (3,05) P (,99).093/.350 (,3/,9) Binder.0 (5,75).09 (,77).0 (,9).50 (3,) P (7,).0/.350 (,57/,9) Truss.5 (,3).075 (,9). (,9).7 (,75) P (,35).093/.3 (,3/7,9) Binder.5 (5,).09 (,77).500 (,70).50 (3,) P (,35)./.500 (7,/,70) Binder.5 (5,).09 (,77).0 (5,75).50 (3,) P (,75).093/.7 (,37/,75) Binder.0 (5,75).09 (,77).300 (7,).50 (3,) P (,0)./.3 (5,5/7,9) ound.375 (9,53).050 (,7).355 (,9).093 (,3) P000. (5,7).5/.3 (3,/7,9) ound.375 (9,53).00 (,03). (,3).0 (3,05) P000.7 (,75).0/.7 (,57/,75) ound.375 (9,53).00 (,03).95 (7,9).5 (3,) P (,75).5/. (3,9/7,) ound.375 (9,53).00 (,03).30 (9,5).5 (3,) P000.7 (,75).0/.7 (,57/,75) ound.375 (9,53).00 (,03). (7,).5 (3,) P (5,).07/.300 (,9/7,) Truss.30 (,00).00 (,03).30 (0,9).0 (3,05) +.005/-.05 O LOCK LENGTH " C" NYLON POLY DIVE IVET MOUNTING EET PAT NUMBE NOMINAL HOLE PANEL THK. ANGE HEAD STYLE HEAD DIA. HEAD HEIGHT LOCK LENGTH PIN DIA. "A" "B" "C" "D" PM 0000*.0 (7,).0/.7 (,55/,75) oot.70 (9,30).570 (,).35 (9,7).7 (,75) PSS (,35).030/.5 (0,7/3,) oot.375 (9,53).500 (,70).3 (,05).50 (3,) * Low Density Polyethylene Material. NYLON POLY DIVE IVET SUPPOTS PAT NUMBE NOMINAL HOLE PANEL THK. ANGE HEAD STYLE HEAD DIA. HEAD HT. LOCK LENGTH PIN DIA. SUP. LENGTH SUPPOT DIA. "A" "B" "C" "D" "" "E" PSS (,75).030/.5 (0,7/3,) Support.35 (,).030 (0,7).00 (5,0).097 (,).00 (0,).0 (,57) PSS (,35).030/.5 (0,7/3,) Support 3/3 (0,3).07 (,9).7 (,75).5 (3,).703 (7,).0 (,0) mpsales@microplastics.com micro plastics, inc. WEBSITE: 97

98 VI PANEL ASTENES AND HOLE PLUGS Micro Plastics' tough, lightweight drive rivet insertion tool makes the assembly of our Polyrivets even more economical. This tool provides a faster assembly, more accurate placement and positions in hard to reach areas. Large plunger head and easy-grip handle reduce operator fatigue. Q TABLE PEVIOUS PAGE O CON TEN TS IN DEX A-Z DIVE IVET INSETION TOOLS ivets do not have to be predriven. In use, the rivet is loaded in tool and inserted in prepared hole, pressure on the plunger frees the pin and expands the rivet in the assembly. Three sizes are available to cover all standard drive rivets. Tools are color coded for identification. ITEM IVET PIN NUMBE SIZE COLO PT (,9) ED PT05.5 (3,) YELLOW PT (3,) GEEN PNEUMATIC DIVE IVET INSETION TOOL BOOST PODUCTIVITY, QUALITY AND COST CONTOL ON YOU ASSEMBLY OPEATIONS The Pneumatic Drive ivet Tool is especially suited for hard to reach or delicate assemblies encountered on all kinds of mechanical and electrical components, appliances, P.C. board assemblies, relays, switches, controls, etc. The durable, lightweight alloy insert tool weighs only ounces and features and easy-grip, non-slip, straight case for single hand fatigue free operation and is equipped with a suspension bail for overhead connections on bench type precision assemblies. The insert tool can be safely used in all positions. In operation the rivet is loaded in the tool and inserted in the prepared hole, slight pressure activates the pneumatic switch and the rivet is driven into the assembly effortlessly. IVETS NEED NOT BE PEDIVEN. Tool is designed to use standard shop air, operating pressure range is 50 to 70 PSI with instant cycling time. One tool will drive all standard rivet sizes, three interchangeable driver attachments are included. Mandrel sizes are.075,.5 and.50 UNIQUE, PECISION TOOL DESIGNED TO EICIENTLY ASSEM BLE ALL ITEM NUMBE PPT00 ATCHETING ACTION IVETS NYLON DIVE IVETS AND MOST ONE- PIECE M ETAL EXPANSION IVETS. COVEED BY U.S. / OEIGN PATENTS DESCIPTION PNEUMATIC IVET INSET TOOL WITH 3 DIVE ATTACHNTS ATCHETING ACTION IVETS AE MOLDED IN NYLON AND AVAILABLE IN BLACK O NATUAL. PLEASE ADD A COLO CODE TO THE END O EACH PAT NUMBE IDENTIING YOU COLO CHOICE. CODE B = BLACK CODE N = NATUAL atcheting action rivets feature a rigid design which provides an outstanding bond created by the action of the interlocking gripper teeth. With the larger head diameter, atcheting action rivets make binding of soft materials a simple application. ITEM NUMBE HEAD DIA. A SHANK LENGTH B HOLE DIA. GIP ANGE 7QB70050 (9,05) 7/3 (5,5) 9/3 (7,).35/.97 (5,97/(7,5) 7QB (9,05) /3 (,73) 9/3 (7,).3/.500 (,79/,70) 7QB (9,05) / (,70) 9/3 (7,).500/. (,70/0,) 7QB70000 (9,05) (9,05) 9/3 (7,).70/.375 (9,/3,93) 7QB (0,3) 7/3 (5,5) 9/3 (7,).35/.97 (5,97/7,5) 7QB (0,3 /3 (,73) 9/3 (7,).3/.500 (,79/,70) 7QB (0,3 / (,70) 9/3 (7,).500/. (,70/0,) 7QB (0,3 (9,05) 9/3 (7,).70/.375 (9,/3,93) 9 TELEPHONE (70) 53- / 53- micro plastics, inc. AX (70) 53-7

99 PEVIOUS PAGE O CON TEN TS IN DEX A-Z PANEL ASTENES AND HOLE PLUGS "SPECIAL ITEM" TWO PIECE SCEW IVETS Micro Plastics' two-piece screw rivets are designed to fasten larger components or small assemblies to their mating panels. Pressing or tapping the screw through the body creates a secure insulated connection. In addition the screw may be removed with a phillips screw driver and the fastener re-used. ivets are molded from Nylon /. VI ITEM NUMBE 0009 ITEM NUMBE 000 ITEM NUMBE 0007 Micro Plastics Nylon Snap ivet is designed for assemblies requiring fast and economical fasteners that can be installed without tools.the Piece Molded astener comes assembled ready for use. The ivet is placed in the hole and the smooth, oversized head is pressed. The specially designed legs expand and firmly lock the components permanently in place. Micro Plastics Snap ivets are molded in high dielectric (UL 9V) Nylon / making them ideal for electronic applications. The following standard sizes are available from stock, other sizes will be tooled on request. NYLON SNAP IVET * +/-.00 on B DINSION ITEM NUMBE A *B PANEL THICKNESS 7S350.0 (,).35 (3,).00/.0 (,5/3,0) 7S000. (3,0).0 (3,5).050/.00 (,3/,5) 7S00. (3,0).0 (5,5)./.0 (3,0/,0) 7S00.55 (3,9).00 (5,0).00/.0 (,5/3,5) 7S (3,9).0 (,0)./. (3,5/,5) 7S (5,0).0 (7,0).0/.00 (,0/5,0) 7S070.0 (,).70 (,3).07/. (,0/3,0) 7S (3,).0 (5,59)./.57 (3,00/,00) 7S (,0).395 (0,03).90/.330 (7,37/,3) 7S (,0).35 (,0)./. (3,7/,7) 7S00.57 (,0).3 (5,9).050/.0 (,/,5) 7S05. (,).5 (,7).70/.0 (,3/5,3) 7S055. (3,0).50 (3,).00/. (0,/,) 7S (5,0).3 (9,35).30/.300 (5,/7,) 7S (,0).35 (,0).00/.50 (,5/,35) NYLON TWO-PIECE EMOVABLE IVETS emovable rivets are two-piece nylon rivets which can be removed by retracting the pin, and then the body. The body incorporates a slot in line with the pin so that the pin can be removed by inserting a small screw driver, other sharp edge, or even a fingernail underneath the head of the pin. In addition to working in a.50 round hole, will also fit the.0 /. square hole found in the darling type shelf commonly used in retail stores. PAT NUMBE A B C / (,).07 (,7) / (,70) TELEPHONE (70) 53- / 53- micro plastics, inc. AX (70)

100 PEVIOUS PAGE O CON TEN TS IN DEX A-Z PANEL ASTENES AND HOLE PLUGS VI Multi-use, light duty Nylon Anchor for use with sheet metal or wood screws. Nylon Anchors can be used in wood, masonry block, concrete, tile, brick or sheet metal. Anchor has twist resisting flange for use in thin wall and hollow materials. Anchors can be color coded for size identification. Metal screw not included. NYLON SCEW ANCHOS ITEM NUMBE SCEW SIZE DILL SIZE A B L WA075 # - 3/ (,7) 5/ (7,9).037 (0,9) 7/ (,) WA700 # 0- (,35) (9,53).037 (0,9) -5/ (7,3) WA3535 # - 5/ (7,9) 7/ (,).037 (0,9) (3,93) TYPE A T Mushroom.50 (,7).0 (,79) ound.5 (0,0).5 (3,) Truss.05 (5,3).0 (,79) lat.37 (,0).0 (,7) TWO PIECE ANCHO IVETS - STEEL DIVE PIN HIGH STENGTH, ZINC PLATED. DEVELOPS HIGH PULL-OUT OCE. ALL ITEMS PACKAGED,000 PE BAG DESCIPTION PAT NUMBE "D" "L" TYPE ASM075 3/ (,7) X (9,05) Mushroom, Steel ASM00 3/ (,7) X (5,0) Mushroom, Steel ASM5075 (,35) X (9,05) Mushroom, Steel ASM500 (,35) X (5,0) Mushroom, Steel ASM550 (,35) X -/ (3,0) Mushroom, Steel AS075 AS00 AS5075 AS500 AS550 3/ (,7) 3/ (,7) (,35) (,35) (,35) X X X X X (9,05) (5,0) (9,05) (5,0) -/ (3,0) ound, Steel ound, Steel ound, Steel ound, Steel ound, Steel AST075 AST00 AST5075 AST500 AST550 3/ (,7) 3/ (,7) (,35) (,35) (,35) X X X X X (9,05) (5,0) (9,05) (5,0) -/ (3,0) Truss, Steel Truss, Steel Truss, Steel Truss, Steel Truss, Steel 00 TELEPHONE (70) 53- / 53- micro plastics, inc. AX (70) 53-7

101 PEVIOUS PAGE O CON TEN TS IN DEX A-Z PANEL ASTENES AND HOLE PLUGS TWO PIECE ANCHO IVETS - PLASTIC AND STEEL DIVE PINS VI Micro Plastics' two piece Anchor ivets provide versatile, inexpensive, vibration-resistant blind fasteners for solid or hollow materials including wood, concrete, plaster, metal, plastic, tile block or mortar. Installation is tapped with a hammer. The drive pin expands and seats the rivet securely in place. The supertough nylon anchor body provides high thermal, electrical, corrosion and vibration resistance. Typical uses for Micro liner panels, rails, scuff boards, floor plates, electrical fixtures, signs, plumbing fixtures, piping and conduit strap hangers, window and drapery hardware, railings, storage shelves and other assemblies requiring a fast, rivet is inserted in predrilled hole and Plastics anchor are semi-trailer construction, positive, durable fastener. THE OLLOWING AE STANDAD SIZES AVAILABLE. MICO PLASTICS, INC. WILL TOOL NON-STANDADS IN SUITABLE QUANTITIES. TYPE A T Mushroom.50 (,7).0 (,79) ound.5 (0,0).5 (3,) Truss.05 (5,3).0 (,79) lat.37 (,0).0 (,7) TWO PIECE ANCHO IVETS - PLASTIC DIVE PIN THEMAL AND ELECTICAL INSULATING. COOSION AND VIBATION ESISTANT. DESCIPTION PAT NUMBE "D" "L" TYPE APM075 APM5075 APM500 APM550 3/ (,7) (,35) (,35) (,35) X X X X (9,05) (9,05) (5,0) -/ (3,0) Mushroom, Plastic Mushroom, Plastic Mushroom, Plastic Mushroom, Plastic ALL ITEMS PACKAGED,000 PE BAG AP075 AP5075 AP500 AP550 3/ (,7) (,35) (,35) (,35) X X X X (9,05) (9,05) (5,0) -/ (3,0) ound, Plastic ound, Plastic ound, Plastic ound, Plastic APT075 APT5075 APT500 APT550 3/ (,7) (,35) (,35) (,35) X X X X (9,05) (9,05) (5,0) -/ (3,0) Truss, Plastic Truss, Plastic Truss, Plastic Truss, Plastic AP505 AP5075 (,35) (,35) X X 9/ (,9) (9,05) lat, Plastic lat, Plastic mpsales@microplastics.com micro plastics, inc. WEBSITE: 0

102 PEVIOUS PAGE O CON TEN TS IN DEX A-Z PANEL ASTENES AND HOLE PLUGS VI Micro Plastics economical snap-in Poly-Plugs will close unneeded chassis holes, wiring outlets, fill unused accessory openings, cover inspection and production access holes. They can be used as tube end caps and protective bumpers. Poly Plugs are molded in Nylon / which is abrasion and vibration resistant making them ideal for drawer glides and small appliance feet. Poly Plugs are designed with special flexible and tapered prongs which snugly lock in place with finger pressure but can be removed and reused when necessary. Parts can be furnished in natural nylon or dyed in colors. Poly Plugs are available in smooth, gloss finish or in dull, matte finish. HOLE PLUGS HOLE PANEL HEAD HEAD ITEM HEAD SIZE THICKNESS SIZE HEIGHT NUMBE STYLE INISH A B D H PP0BG Binder Smooth.7 (,75).03/.0 (0,79/3,5) /3 (,7).00 (,0) PP0BM PP0G0 PP0G09 PP05BG0 PP05BM0 PP03BG PP03BM PP0BG09 PP05BG09 PP037BG PP037BG3 PP037BM3 PP03BG7 PP03BM7 PP0BM PP050BG PP050BM PP05BG PP05BM PP0BG07 PP0BM07 PP0BG0 PP0BM0 PP075BG PP075BM PP07BG09 PP07BM09 PP0BG PP0BM PP07BG PP07BM PP00BG PP00BM Binder Dome Dome Binder Binder Binder Binder Binder Binder Binder Binder Binder Binder Binder Binder Binder Binder Binder Binder Binder Binder Binder Binder Binder Binder Binder Binder Binder Binder Binder Binder Binder Binder VENT PLUGS Matte Smooth Smooth Smooth Matte Smooth Matte Smooth Smooth Smooth Smooth Matte Smooth Matte Matte Smooth Matte Smooth Matte Smooth Matte Smooth Matte Smooth Matte Smooth Matte Smooth Matte Smooth Matte Smooth Matte.7 (,75). (5,5). (5,5).50 (,35).50 (,35).3 (7,93).3 (7,93).5 (3,).50 (3,).375 (9,53).375 (9,53).375 (9,53).37 (,0).37 (,0).0 (,9).500 (,70).500 (,70).5 (,).5 (,).5 (5,).5 (5,).7 (7,5).7 (7,5).750 (9,05).750 (9,05).77 (0,00).77 (0,00). (0,3). (0,3).75 (,3).75 (,3).000 (5,0).000 (5,0).03/.0 (0,79/3,5).03/.0 (0,79/,5).03/.09 (0,79/,39).03/.0 (0,79/,5).03/.0 (0,79/,5).03/.0 (0,79/3,5).03/.0 (0,79/3,5).03/.09 (0,79/,39).03/.09 (0,79/,39).03/.0 (0,79/3,5).03/.0 (0,79/3,5).03/.0 (0,79/3,5).03/.7 (0,79/,3) 39/ (5,7).03/.7 (0,79/,3) 39/ (5,7).03/.039 (0,79/0,99).03/.0 (0,79/3,5).03/.0 (0,79/3,5).03/.0 (0,79/3,5).03/.0 (0,79/3,5).03/.07 (0,79/,3).03/.07 (0,79/,3).03/.09 (0,79/,77).03/.09 (0,79/,77).03/.09 (0,79/,77).03/.09 (0,79/,77).059/.00 (,50/,03).059/.00 (,50/,03) /3 (,7) (9,53) (9,53) 7/ (0,7) 7/ (0,7) 9/ (,5) 9/ (,5) 3/ (5,) (,35) 3/ (7,07) 37/ (,) 37/ (,) 37/ (,) 3/ (7,07) 3/ (7,07) 7/ (,) 7/ (,) 5/ (0,) 5/ (0,) 57/ (,3) 57/ (,3) 3/ (5,00) 3/ (5,00) 3/ (5,00) 3/ (5,00).03/.09 (0,79/,77) /3 (,9).03/.09 (0,79/,77) /3 (,9).03/.09 (0,79/,77) 5/ (7,3).03/.09 (0,79/,77) 5/ (7,3).03/.09 (0,79/,77) 7/3 (30,9).03/.09 (0,79/,77) 7/3 (30,9).00 (,0).50 (,35).50 (,35).00 (,0).00 (,0).055 (,0).055 (,0).00 (,0).00 (,0).0 (,5).050 (,7).055 (,0).055 (,0).050 (,7).050 (,7).0 (,5).0 (,5).0 (,5).0 (,5).0 (,5).0 (,5).0 (,5).0 (,5).0 (,5).0 (,5).0 (,5).0 (,5).0 (,5).0 (,5).0 (,5).0 (,5).0 (,5).0 (,5) VP07BM VP00BM Binder Binder.75 (,3).000 (5,0).03/.09 (0,79/,77) 5/ (7,3).03/.09 (0,79/,77) 7/3 (30,9).0 (,5).0 (,5) 0 TELEPHONE (70) 53- / 53- micro plastics, inc. AX (70) 53-7

103 PEVIOUS PAGE O CON TEN TS IN DEX A-Z PANEL ASTENES AND HOLE PLUGS Nylon Locking Hole Plugs are available in a large selection of sizes from 3/" to /". These hole plugs are designed with multiple locks to VI positively snap in panel thicknesses ranging from /" to /". Locking Hole Plugs are used to close excess chassis holes, wiring outlets, and production access holes. These hole plugs are molded of heat stabilized nylon (UL9V) and may be more suitable for critical or elevated temperature applications. Vent Plugs are available in to 7/" and " diameters. Locking Hole Plugs are stocked in black. Other colors are available in volume requirements. LOCKING HOLE PLUGS ITEM NUMBE HOLE DIATE MAXIMUM HEAD DIAM ETE THICKNESS THICKNESS B C * M P07.7 (,).0 (,).50 (,).3 (5,9) * M P (,).0 (,).3 (,0).3 (,0) * M P03.3 (,0).0 (,).375 (9,5).3 (,0) * M P (9,5).5 (3,). (,0).0 (0,3) * M P (,0).5 (3,).53 (3,5).0 (0,3) * M P (,7).5 (3,).57 (,).0 (0,3) * M P05.5 (,3).5 (3,).5 (,7).0 (0,3) * M P05.5 (5,9).5 (3,).7 (,).0 (0,3) * M P07.7 (7,5).5 (3,).7 (0,0).0 (0,3) * M P (9,0).5 (3,).9 (3,).0 (0,3) * M P0. (0,).5 (3,).90 (,).0 (0,3) * M P (,).5 (3,).0 (5,).53 (,5) ** M P (5,5).5 (3,).03 (30,5).53 (,5) ** M P /5 (,0/,5).5 (3,). (3,0).53 (,5) ** M P7.7 (30,).5 (3,).3 (33,3).53 (,5) ** M P50.50 (3,0).5 (3,).375 (3,9).53 (,5) ** M P (35,0).5 (3,).500 (3,0).53 (,5) ** M P (3,0).5 (3,).7 (,7).53 (,5) ** M P (5,0).5 (3,).95 (,9).53 (,5) **** M P (5,0).5 (3,).0 (55,0).53 (,5) **** M P (3,5).50 (,).775 (70,5).750 (9,) NOTE: +/-.05 ON ALL DINSIONS * MINIMUM ODE QUANTITY,000 PIECES ** MINIMUM ODE QUANTITY 500 PIECES **** MINIMUM ODE QUANTITY 50 PIECES ***** MINIMUM ODE QUANTITY 00 PIECES LOCKING VENT PLUGS * M P0750V * M P075V ** M P000V.750 (9,).75 (,5).000 (5,5).5 (3,).5 (3,).5 (3,).90 (3,0).0 (5,).03 (30,5).0 (0,3).53 (,5).53 (,5) mpsales@microplastics.com micro plastics, inc. WEBSITE: 03

104 PEVIOUS PAGE O CON TEN TS IN DEX A-Z WIE HANDLING HADWAE VII Micro Plastics' molded nylon cable clamps secure, insulate and route cable, wiring, tubing, piping and fibre optics. These tough, durable chemical resistant nylon / cable clamps are perfect for applications in electronics, automotive, air craft, appliance and many other industries. The Heavy Duty Series provides a full /" wide contact area for all critical and heavy duty industrial and commercial applications, while the economical Standard Series has a " wide contact area and is designed for medium to lightweight applications. All contact edges have a full radius for product protection. Sizes are clearly marked on each clamp. The following are standard sizes available. Micro Plastics will tool non-standard sizes in suitable quantities. lame retardant nylon /, % carbon black nylon / (U.V. resistant), and polypropylene clamps are available on special order. M INIATUE CABLE CLAM PS ITEM NUMBE D W H +/-.00 E +/-.00 CCA00 / (0,79) 5/3 (3,97).09 (,).7 (,75) CCA0093 3/3 (,3) 5/3 (3,97).09 (,).03 (5,) CCA05 / (3,) 5/3 (3,97).09 (,).7 (5,5) CCA05 5/3 (3,97) 5/3 (3,97).09 (,).33 (5,9) CCA07 3/ (,7) 5/3 (3,97).09 (,).50 (,35) CCE050 (,35) 9/3 (7,). (3,5).337 (,5) CCE0375 (9,5) 9/3 (7,). (3,5).00 (0,) STANDAD CABLE CLAM PS NOTE: H AND E DINSIONS AE + / -.05 TOLEANCE. ITEM NUMBE D W H E CC37B05 / (3,) (9,53).0 (3,5).39 (,3) CC37C05 CC37D05 CC37B07 CC37C07 CC37D07 CC37B07E CC37C07E CC37D07E CC37B050 CC37C050 CC37D050 CC37B03 CC37C03 CC37D03 CC37B0375 CC37C0375 CC37D0375 / / 3/ 3/ 3/ 3/ 3/ 3/ 5/ 5/ 5/ (3,) (3,) (,7) (,7) (,7) (,7) (,7) (,7) (,35) (,35) (,35) (7,9) (7,9) (7,9) (9,53) (9,53) (9,53) (9,53) (9,53) (9,53) (9,53) (9,53) (9,53) (9,53) (9,53) (9,53) (9,53) (9,53) (9,53) (9,53) (9,53) (9,53) (9,53) (9,53).7 (,).03 (5,).0 (3,5).7 (,).03 (5,).0 (3,5).7 (,).03 (5,).0 (3,5).7 (,).03 (5,).0 (3,5).7 (,).03 (5,).0 (3,5).7 (,).03 (5,).39 (,3).39 (,3).30 (0,9).30 (0,9).30 (0,9).37 (9,0).37 (9,0).37 (9,0).0 (0,).0 (0,).0 (0,).95 (,57).95 (,57).95 (,57).595 (5,).595 (5,). 595 (5,) CC37B037 CC37C037 CC37D037 7/ (,) 7/ (,) 7/ (,) (9,53) (9,53) (9,53).0 (3,5).7 (,).03 (5,).57 (,5).57 (,5).57 (,5) CC37B0500 CC37C0500 CC37D0500 / / / (,70) (,70) (,70) (9,53) (9,53) (9,53).0 (3,5).7 (,).03 (5,).05 (5,37).05 (5,37).05 (5,37) CC37D05 9/ (,9) (9,53).03 (5,).0 (5,39) CC37D05 (5,) (9,53).03 (5,).7 (7,) 0 TELEPHONE: (70) 53- / 53- micro plastics, inc. AX: (70) 53-7

105 PEVIOUS PAGE O CON TEN TS IN DEX A-Z WIE HANDLING HADWAE VII HEAVY DUTY CABLE CLAM PS ITEM NUMBE D W H E CC50C05 / (3,) / (,70).7 (,).35 (,00) CC50D05 / (3,) / (,70).03 (5,).35 (,00) CC50C07 3/ (,7) / (,70).7 (,).5 (0,0) CC50D07 3/ (,7) / (,70).03 (5,).5 (0,0) CC50C050 (,35) / (,70).7 (,).0 (0,) CC50D050 (,35) / (,70).03 (5,).0 (0,) CC50C03 5/ (7,9) / (,70).7 (,).500 (,70) CC50D03 5/ (7,9) / (,70).03 (5,).500 (,70) CC50C0375 (9,53) / (,70).7 (,).530 (3,) CC50D0375 (9,53) / (,70).03 (5,).530 (3,) CC50G0375 (9,53) / (,70).50 (,35).55 (,) CC50C037 7/ (,) / (,70).7 (,).50 (,) CC50D037 7/ (,) / (,70).03 (5,).50 (,) CC50C0500 / (,70) / (,70).7 (,).595 (5,) CC50D0500 / (,70) / (,70).03 (5,).595 (5,) CC50C05 9/ (,9) / (,70).7 (,).0 (5,39) CC50D05 9/ (,9) / (,70).03 (5,).0 (5,39) CC50C05 (5,) / (,70).7 (,).55 (,) CC50D05 (5,) / (,70).03 (5,).55 (,) CC50C07 / (7,) / (,70).7 (,).755 (9,) CC50D07 / (7,) / (,70).03 (5,).755 (9,) CC50C0750 (9,05) / (,70).7 (,).70 (9,) CC50D0750 (9,05) / (,70).03 (5,).70 (9,) CC50C0 3/ (0,) / (,70).7 (,).5 (0,70) CC50D0 3/ (0,) / (,70).03 (5,).5 (0,70) CC50C075 (,) / (,70).7 (,).5 (,) CC50D075 (,) / (,70).03 (5,).5 (,) CC50D000 (5,0) / (,70).03 (5,).90 (3,) CC50D5 / (,5) / (,70).03 (5,).970 (,) CC50D7 3/ (30,) / (,70).03 (5,).000 (5,0) CC50D50 (3,75) / (,70).03 (5,).00 (,9) CC50D375 3 (3,93) / (,70).03 (5,).5 (,5) CC50D500 / (3,0) / (,70).03 (5,).90 (30,3) EXTA HEAVY DUTY CABLE CLAM PS ITEM NUMBE D W H E CC70750 (9,05) 7/ (,).37 (9,3).000 (5,0) CC7D003 /3 (,9) 7/ (,).37 (9,3).5 (,5) CC7003 /3 (,9) 7/ (,).03 (5,).5 (,5) NOTE: H AND E DINSIONS AE + / -.05 TOLEANCE. Assigned Code 05 mpsales@microplastics.com micro plastics, inc. WEBSITE: 05

106 PEVIOUS PAGE O CON TEN TS IN DEX A-Z WIE HANDLING HADWAE VII ELEASABLE ADHESIVE BACKED WIE CLIPS Micro Plastics' Adhesive Backed Nylon Wire and Cable Clips are used to route wires and cables. The parts are backed with polyurethane foam tape, and feature a releasable clip so wires can be removed after assembly if desired. Parts are stocked in natural, when ordering black parts add the letter "B" to the end of the part number. ITEM NUMBE AWC00375 ITEM NUMBE AWC005 ITEM NUMBE AWC00 ITEM NUMBE AWC007 ITEM NUMBE AWC5007 ITEM NUMBE AWC30 ITEM NUMBE AWC00 0 TELEPHONE: (70) 53- / 53- micro plastics, inc. AX: (70) 53-7

107 HEAVY DUTY CABLE CLIPS ITEM NUMBE DESCIPTION "B" "C" "D" HDCC50 HDCC70 HDCC30 HDCC970 HDCC3590 HDCC0 HDCC0 Q TABLE PEVIOUS PAGE /" Hvy. dty. Clip 3/" Hvy. dty. Clip " Hvy. dty. Clip 5/" Hvy. dty. Clip " Hvy. dty. Clip 7/" Hvy. dty. Clip /" Hvy. dty. Clip WIE HANDLING HADWAE O CON TEN TS IN DEX A-Z Micro Plastics' Nylon Heavy Duty Cable ClIps are designed for cable and wire applications involving greater than usual loads or connections of critical nature. The rugged clip has reinforced side flanges for additional strength and rigidity. Compact design allows this clip to be used on corners, edges or where space is limited. Clip Has hole for screw mounting. Available in size range for /" to /" diameter cable. VII TOLEANCES +/-.05 ELEASABLE CLAM P ON IN CLIP BASE ITEM NUMBE A B C BUNDLE DIA. HOLE DIA. PANEL ANGE 3CB037.3 (,7).5 (,7).7 (,75).375 (9,53).7 (,75) VAIABLE 3CBO50.3 (,7).5 (,7).7 (,75).500 (,70).7 (,75) VAIABLE 3CB00.3 (,7).5 (5,).375 (9,53) (5,0).50 (,35) VAIABLE Micro Plastics announces the Contour Clip. The adhesive-backed part incorporates new design consisting of a hinge type movement in the base which flexes to fit convex or concave surfaces. This flexible base allows the part to be used on cylindrical surfaces such as pipes or tubing, and on irregular surfaces - even around corners. The part molded from nylon and is applied with our standard adhesive-backed tape with an extended paper liner for easy removal of the liner. The part is also available with 3m s VHB (very high bond) tape which develops a high-strength, epoxy type bonding. Simply add VHB to the end of the part number. CONTOU CLIP ITEM NUMBE DESCIPTION CAWC0 Contour Clip mpsales@microplastics.com micro plastics, inc. WEBSITE: 07

108 PEVIOUS PAGE O CON TEN TS IN DEX A-Z WIE HANDLING HADWAE VII Micro Plastics' Nylon Wire Clip provide fast, secure assembly and routing of wires, standard round cable, flat cable and tubing. Micro Plastics' Nylon Spring Clips provide fast, secure assembly and routing of wires, standard round cable, flat cable and tubing. The Spring Clip can also be used to mount panels, glass, displays, or signs. To inspect, add or replace wires, simply pull back clip to allow placement. The tough, flexible nylon clip will spring back to hold the material securely. All contact edges are rounded for product protection. WIE CLIPS SPING CLIP ITEM NUMBE DESCIPTION ITEM NUMBE DESCIPTION WC5003 WIE CLIP / X.3 SCP3753 SPING CLIP X.3 WHB SEIES HAS B STYLE CLIP Micro Plastics Wire/Cable Holders are designed to mount into 3/ or 5mm hole diameters. Wire/Cable Holders can be used in a variety of panel thicknesses and materials. Sizes are available to handle wire bundle diameters from.375 to.500. WIE/CABLE HOLDES ITEM NUMBE A* B* C* HOLE DIA. PANEL ANGE WHA VAIABLE WHA VAIABLE WHA VAIABLE WHA VAIABLE WHB /.00 WHB /.00 WHB /.00 WHB /.00 WIE/CABLE HOLDES - M ETIC SIZES A*,B*, C* COLUMNS +/-.03 ITEM NUMBE A B C HOLE DIA. PANEL ANGE MWHA mm VAIABLE MWHA mm VAIABLE MWHA mm VAIABLE MWHA mm VAIABLE 0 TELEPHONE: (70) 53- / 53- micro plastics, inc. AX: (70) 53-7

109 PEVIOUS PAGE O CON TEN TS IN DEX A-Z WIE HANDLING HADWAE Micro Plastics nylon Single press clips are the convenient and fast way to install wires and cable to almost any surface. Tough, corrosion resistant nylon / clip is backed with a quality foam adhesive tape. The single clip is designed to be used in areas where space is limited or in corners or edges and are supplied on easy-to-use perforated liner strips in sets of to 0 pieces. To install, simply pull the clip off of the liner strip and press into place. No holes to drill or screw to turn. Nylon press clips provide a low in-place assembly that is quick and permanent. Polyurethane foam tape has excellent conformability, high temperature and solvent resistance and high ultimate bond strength. VII *Packaged 50 pcs. per roll **Packaged 00 pcs. per roll SINGLE ADHESIVE BACKED NYLON CABLE CLIPS ITEM NUMBE DESCIPTION "D" "A" "H" "W" ** SPC3037 /" SNGL CLIP /" (3,).93 (,5).7 (5,5) " (9,53) ** SPC0000 3/" SNGL CLIP 3/" (5,).0 (0,53).55 (,) /" (,70) ** SPC5550 " SNGL CLIP " (,35).5 (,97).33 (,7) /" (,70) ** SPC35 " SNGL CLIP " (9,53).000 (5,0).75 (,07) " (5,) * SPC50575 /" SNGL CLIP /" (,70).5 (,5).593 (5,0) " (9,05) Micro Plastics nylon double press clips are the convenient and fast way to install wires and cable to almost any surface. Tough, corrosion resistant nylon / clip is backed with a quality foam adhesive tape. The double clip design develops greater shear loads and holding power and are supplied on easy-to-use perforated liner strips in sets of to 0 pieces. To install, simply pull the clip off of the liner strip and press into place. No holes to drill or screw to turn. Nylon press clips provide a low in-place assembly that is quick and permanent. Polyurethane foam tape has excellent conformability, high temperature and solvent resistance and high ultimate bond strength. DOUBLE ADHESIVE BACKED NYLON CABLE CLIPS ITEM NUMBE DESCIPTION "D" "A" "H" "W" ** DPC3037 /" DBLE CLIP /" (3,).70 (9,30). (5,9) " (9,53) ** DPC5550 " DBLE CLIP " (,35).30 (35,05).3 (,) /" (,70) * DPC30 " DBLE CLIP " (9,53).505 (3,3).55 (,5) " (5,) * DPC50575 /" DBLE CLIP /" (,70).00 (0,).50 (,73) " (9,05) *Packaged 50 pcs. per roll **Packaged 00 pcs. per roll mpsales@microplastics.com micro plastics, inc. WEBSITE: 09

110 PEVIOUS PAGE O CON TEN TS IN DEX A-Z WIE HANDLING HADWAE VII POTECT WIES, CABLES, TUBING AND OTHE OBJECTS OM SHAP PANEL EDGES. Continuous lexible Grommeting can be used for round, square and irregular shaped panels. lexible grommeting is attached quickly and easily using no special tools. In addition to protecting routed cables, wires, tubing and other objects from chafing or unnecessary cuts, the installed grommeting also puts an attractive finished touch to a product. Continuous flexible grommeting is manufactured to fit over a range of panel thicknesses from.00" to.7". Sheet form materials can include glass, sheet metal and wood. In many cases flexible grommeting will grip the panel tightly and remain in place. Should the panel thickness vary to a point that the grommeting will not adhere tightly by itself, the problem can usually be corrected by a touch of epoxy to keep the grommeting tightly in place. Continuous flexible grommeting comes from the factory in polybagged rolls of 00 feet. Longer lengths can be made available by using bulk spools. lexible grommeting can also be cut to lengths to meet customer needs. CONTINUOUS, SOLID O SEATED. COLOS: NATUAL O BLACK, CUSTOM COLOS AVAILABLE. CUSTOM LENGTHS AVAILABLE O VOLUM E APPLICATIONS. LEXIBILITY, ITS HOLES O ANY SHAPE O SIZE. AVAILABLE OM STOCK IN COILS O 00 EET. MATEIAL: POLYETHYLENE. ADD COLO CODE TO THE END O EACH PAT NUMBE TO SPECIY COLO SELECTION: BK = BLACK POLYETHYLENE MATEIAL INOMATION POLYETHYLENE grommeting is a lightweight low cost material good for general indoor applications. Polyethylene is not affected by ordinary solvents and resistant to abrasion. CONTINUOUS LEXIBLE GOM M ETING - NATUAL O BLACK ITEM MAX PANEL NUMBE THICKNESS GAP E. A E. B E. C E. TYPE GU000P.00/.070 (,0)/(,7).035 (0,9).0 (0,7).07 (,3).90 (,3) UNCUT GS000P.00/.070 (,0)/(,7).035 (0,9).0 (0,7).07 (,3).90 (,3) SEATED GU050P.05/.070 (,)/(,7).00 (,0).0 (0,7).07 (,3).90 (,3) UNCUT GS050P.05/.070 (,)/(,7).00 (,0).0 (0,7).07 (,3).90 (,3) SEATED GU00P.055/.075 (,0/(,9).050 (,7).00 (,0).00 (,03).00 (5,0) UNCUT GS00P.055/.075 (,0/(,9).050 (,7).00 (,0).00 (,03).00 (5,0) SEATED GU050P.00/.05 (,03)/(,).075 (,9).00 (,0).05 (,).90 (,3) UNCUT GS050P.00/.05 (,03)/(,).075 (,9).00 (,0).05 (,).90 (,3) SEATED GU000P.00/.0 (,5/(3,05).095 (,).05 (,).0 (3,05).0 (5,59) UNCUT GS000P.00/.0 (,5/(3,05).095 (,).05 (,).0 (3,05).0 (5,59) SEATED GU05P.5/.5 (,9)/(3,). (,).00 (,0).5 (3,).0 (5,59) UNCUT GS05P.5/.5 (,9)/(3,). (,).00 (,0).5 (3,).0 (5,59) SEATED GU07P./.7 (,)/(,75).0 (,57).050 (,7).7 (,75).75 (,99) UNCUT GS07P./.7 (,)/(,75).0 (,57).050 (,57).7 (.75).75 (,99) SEATED IBBON CLIPS ITEM NUMBE CC TELEPHONE: (70) 53- / 53- micro plastics, inc. AX: (70) 53-7

111 CONDUIT CLIPS Q TABLE PEVIOUS PAGE O CON TEN TS IN DEX A-Z WIE HANDLING HADWAE Various wiring, such as VII telephone wire, is often routed with electrical conduit. Conduit clips are designed to snap onto electrical conduit. The integrated wireholder on the clip allows wiring to be secured to the conduit. Installation is faster and easier than with a wire tie, which is often used for this purpose. The clip can be easily removed if necessary. Two sizes are avialble for / and ID conduit, which will accommodate various wire sizes up to 5/ diameter. Parts are molded in light weight, chemical and corrosion resistant nylon /. ITEM NUMBE DESCIPTION A B C CONDUIT SIZE 3CDC0505 / CONDUIT CLIP.00 (5,0).50 (,35).50 (,35) / (,70) 3CDC0753 CONDUIT CLIP.3 (7,9).3 (7,9).50 (,35) (9,05) Micro Plastics' molded Nail-In Clips are used to safely install cable T.V., fiber optics, computer networks, telephone and other communication systems, hydraulic and pneumatic systems. The clips are molded in tough, electrically insulating, ultra violet resistant, high density Polyethylene. Main stress areas of the clip have reinforcing ribs designed into the part to strengthen and absorb the impact. The Nail-In Clips have all contact edges radiused to protect cable or tubing from damage. Micro Plastics' clips are supplied with heat treated, galvanized steel nails pre-assembled, ready for use in masonry, wood, plaster, or stucco. Clips are easily and efficiently installed, resulting in a low in-place cost. Micro Plastics' Nail-In Clips are stocked in the most popular cable sizes ranging from mm to 9 mm including the G59 and the double shield cables. *THESE SIZES AE NOT SUITABLE O USE IN MASONY.,000 PIECE MINIMUM ODE QUANTITY. PLASTIC NAIL-IN CLIPS ITEM NUMBE DESCIPTION A B C D E NCC000* mm 75 COAX.0 (5,33).375 (9,53).0 (,0).0 (.,0).5 (5,) NCC050*.5mm BELL.05 (5,).39 (0,).05 (,7). (5,5).75 (,5) NCC0500* 5mm G-5.50 (,35).0 (0,7).00 (5,0).0 (5,).5 (7,) NCC0700 7mm G-.5 (7,).535 (3,0).3 (,).5 (,73).30 (,) NCC000 mm 59TIAX.300 (7,).0 (5,9).3 (7,9).37 (,05).00 (0,) NCC0900 9mm DUAL G.0 (0,7).700 (7,7).5 (5,) (9,53).335 (,5) mpsales@microplastics.com micro plastics, inc. WEBSITE:

112 PEVIOUS PAGE O CON TEN TS IN DEX A-Z WIE HANDLING HADWAE VII Micro Plastics bushings provide economical protection for wire, cable tubing, and hose from sharp, uneven drilled or punched holes in sheet metal. The tough, resilient heat stabilized nylon bushings are easily and positively snapped into position without tools. The bushings are the economical solution to insulate wire, cables, etc. from raw edges in compact designs where internal clearances are critical. Miniature bushings accommodate panels up to / " thickness and require only / " clearance. * MATEIAL HEAT STABILIZED NYLON UL 9V * TEMPEATUE INDEX 05 C * STOCKED IN STANDAD BLACK * COLOS AVAILABLE ON EQUEST NOTE: +/-.05 TOLEANCES on A,B and C DINSIONS. M INIATUE INSULATING BUSHINGS PAT NUMBE INSIDE DIA. HEAD DIA. THICKNESS HOLE DIA. * "A" * "B" * "C" (PANEL) M P000.5 (3,).50 (,).3 (,).7 (,) M P005 M P000 M P0030 M P000 M P0050 M P000 M P0070 M P (,).33 (,).375 (9,5).0 (0,3).500 (,7).5 (,0).5 (,0).750 (9,0).375 (9,5).53 (3,5).5 (,3).593 (5,).703 (7,9). (,0).59 (,5).937 (3,).3 (,).50 (,).50 (,).50 (,).50 (,).50 (,).50 (,).50 (,).3 (,0). (,9).500 (,7).53 (3,5).5 (5,9).750 (9,0).7 (9,9).75 (,) ALL ITEM S PACKAGED,000 PE BAG TELEPHONE: (70) 53- / 53- micro plastics, inc. AX: (70) 53-7

113 PEVIOUS PAGE These bushings are available in a large selection of sizes from " to " in various inside diameter openings. Standard bushings are designed with multiple locks to positively snap in panels ranging from /3" to /" thickness. O CON TEN TS IN DEX A-Z WIE HANDLING HADWAE VII Standard bushings meet Underwriters Laboratories and Canadian Standards Association temperature and pull-out tests. NOTE: +/-.05 TOLEANCES on A,B and C DINSIONS. STANDAD INSULATING BUSHING DESCIPTION PAT DINSIONS CHASSIS DINSIONS --- ITEM NUMBE INSIDE DIA. HEAD DIA. THICKNESS HOLE DIA. MAXIMUM "A" "B" "C" THICKNESS * M P050.5 (3,).3 (,0).3 (,0).50 (,).0 (,) * M P033.7 (,).375 (9,5).3 (,0).3 (,0).0 (,) * M P (,). (,9).0 (0,3).375 (9,5).5 (3,) * M P (,). (,9).0 (0,3).375 (9,5).5 (3,) * M P (,).53 (3,5).0 (0,3).37 (,).5 (3,) * M P (,0).53 (3,5).0 (0,3).37 (,).5 (3,) * M P037.3 (,).53 (3,5).0 (0,3).37 (,).5 (3,) * M P (,). 57 (,7).0 (0,3).500 (,7).5 (3,) * M P (,0).57 (,7).0 (0,3).500 (,7).5 (3,) * M P (9,5).57 (,7).0 (0,3).500 (,7).5 (3,) * M P055.3 (,0).5 (,7).0 (0,3).5 (,3).5 (3,) * M P (9,5).5 (,7).0 (0,3).5 (,3).5 (3,) * M P (,).5 (,7).0 (0,3).5 (,3).5 (3,) * M P05.50 (,).7 (,).0 (0,3).5 (5,9).5 (3,) * M P (,).7 (,).0 (0,3).5 (5,9).5 (3,) * M P (,7).7 (,).0 (0,3).5 (5,9).5 (3,) * M P (,7).7 (9,).0 (0,3).7 (7,5).5 (3,) * M P079.5 (,3).7 (9,).0 (0,3).7 (7,5).5 (3,) * M P (9,5).3 (,).0 (0,3).750 (9,).5 (3,) * M P (,7).3 (,).0 (0,3).750 (9,).5 (3,) * M P (,3).3 (,).0 (0,3).750 (9,).5 (3,) * M P (5,9).3 (,).0 (0,3).750 (9,).5 (3,) * M P009.5 (,3).90 (,).0 (0,3). (0,).5 (3,) * M P00.5 (5,9).90 (,).0 (0,3). (0,).5 (3,) ** M P (9,5).953 (,).53 (,5).75 (,).5 (3,) ** M P (,).953 (,).53 (,5).75 (,).5 (3,) ** M P (,7).953 (,).53 (,5).75 (,).5 (3,) ** M P (,3).953 (,).53 (,5).75 (,).5 (3,) ** M P070.5 (5,9).953 (,).53 (,5).75 (,).5 (3,) ** M P07.7 (7,).953 (,).53 (,5). 75 (,).5 (3,) ** M P (9,0).5 (,).53 (,5).000 (5,).5 (3,) ** M P093. (0,). (30,9).53 (,5).093 (7,).5 (3,) ** M P09.75 (,). (30,9).53 (,5).093 (7,).5 (3,) ** M P (3,). (30,9).53 (,5).093 (7,).5 (3,) *** M P5.937 (3,).3 (33,3).53 (,5).7 (30,).5 (3,) *** M P (3,).359 (3,5).53 (,5).50 (3,7).5 (3,) *** M P (5,). (37,3).53 (,5).375 (3,9).5 (3,) *** M P507.0 (7,0).09 (0,9).53 (,5).500 (3,).5 (3,) *** M P50.5 (,5).09 (0,9).53 (,5).500 (3,).5 (3,) *** M P50.3 (33,3).09 (0,9).53 (,5).500 (3,).5 (3,) *** M P (3,9).75 (7,).53 (,5).750 (,).5 (3,) *** M P00.5 (,).5 (5,0).53 (,5).000 (50,).5 (3,) * Minimum order quantity,000 pieces. ** Minimum order quantity 500 pieces. *** Minimum order quantity 50 pieces. mpsales@microplastics.com micro plastics, inc. WEBSITE: 3

114 PEVIOUS PAGE O CON TEN TS IN DEX A-Z WIE HANDLING HADWAE VII Micro Plastics Threaded Lampcord Bushings are molded in tough Black Heat Stabilized Nylon (Underwriters Laboratories ated 9V, Temperature Index 05 C). Micro Plastics has available from stock the most popular sizes of Threaded Lampcord Bushings. These bushings are designed to protect the electrical lampcord from the knife-edge of the threaded pipe used in light fixtures. They will easily thread onto standard lamp fixture / NPS and NPS threaded ends. Micro Plastics bushings will provide reliable, safe and insulated connections. Micro Plastics has available from stock the most popular sizes of Threaded Lampcord Bushings. NYLON THEADED LAM PCOD BUSHINGS ITEM NUMBE DESCIPTION A B 0M P05TLB / NPS 9/3" 9/3" 0M P050TLB NPS 3/3" " 0M P0375TLB NPS 7/" 7/" 0M P0500TLB / NPS /" " LED HOLDES O STANDAD LED T - ITEM NUMBE A B C HOLE SIZE PANEL ANGE 7LEDHO.37 (,.05).05 (0,).50 (,35).0 /.7 (,0) / (,7).070 (,7) 7LEDH0.357 (9,07).09 (,9).0 (5,59). /.7 (7,) / 7,9).0 (,7) PC. NYLON THEADED BUSHING NUT DINSIONS ITEM NUMBE THICKNESS WENCHING LATS THEAD 0M P0500TB 7/" -/" / NPS TELEPHONE: (70) 53- / 53- micro plastics, inc. AX: (70) 53-7

115 PEVIOUS PAGE O CON TEN TS IN DEX A-Z WIE HANDLING HADWAE Micro Plastics' exclusive anti-twist design was developed to eliminate the electrical cord from twisting inside the lamp. Anti-Twist Bushings' convenient opening allows it to slip easily around the cord. When the Lampcord Bushing is threaded over the cord the two bushings slip together allowing for easy installation onto any standard lamp fixture. Anti-Twist Bushing fits a /" pipe thread and accommodates a standard cord size of SPT-,,. The bushing was designed to be used with Micro Plastics' standard /" Lamp Cord Bushing. Other sizes will be tooled upon request. VII ANTI-TWIST BUSHING ITEM NUMBE DESCIPTION A B C D ef. 0M P05ATB /" ANTI-TWIST M P050ATB " ANTI-TWIST Micro Plastics Lamp Snap Bushings are an economical approach to the protection of lampcord insulation, from the sharp and often burred ends of the standard threaded pipe used in lamp manufacture. Bushings are molded of black Hidensity Polyethylene, to allow flexibility for easy installation, and durability for long lasting cord protection. LAMP SNAP BUSHINGS Minimum order quantity,000 pieces. ITEM NUMBE DESCIPTION L A B G 0M P05SB /" SNAP " " /3" M P050SB " SNAP 5/3" 7/" /3" PATS AE MOLDED IN APPLIANCE WHITE NYLON NYLON THEADED TUBING ITEM NUMBE A B C 0MP3500TT 3/" - NPS 3 / " +/- /" 0M P350TT 3/" - NPS 3 " +/- /" mpsales@microplastics.com micro plastics, inc. WEBSITE: 5

116 PEVIOUS PAGE O CON TEN TS IN DEX A-Z WIE HANDLING HADWAE VII Micro Plastics Nylon "ALL-IT" Adjustable Bushings are designed to protect wire, cable, tubing or irregular shaped items from sharp, unfinished edges. The specially designed, resilient multiple supports absorb shock and vibration, and adjust to accept various diameters and shapes. The All-it Bushing is equipped with multiple locks to positively snap in panel thicknesses ranging from /3" to /". ALL-IT ADJUSTABLE BUSHINGS DESCIPTION CHASSIS DINSIONS PAT DINSIONS ITEM HOLE MAXIMUM HEAD DIA. THICKNESS MAXIMUM NUMBE DIA. THICKNESS *B *C I.D. A05 A0750 A0 A075 A000.5 (5,9).750 (9,0). (0,).75 (,).000 (5,).5 (3,).5 (3,).5 (3,).5 (3,).5 (3,).7 (,).59 (,).90 (,).937 (3,).0 (,9).0 (0,3).390 (9,9).390 (9,9).53 (,5).53 (,5) A (7,).5 (3,).5 (9,3).53 (,5) MINIMUM ODE QUANTITY,000 PIECES. * +/-.05 TOLEANCE.37 (,).500 (,7).500 (,7).5 (,).750 (9,0). (0,) LED SPACE ITEM NUMBE OD ID LENGTH 7LEDSP050 7LEDSP0375 7LEDSP0500 3/ (,7) 3/ (,7) 3/ (,7).05 (,).05 (,).05 (,) (,35) (9,53) / (,70) Micro Plastics' Dummy Plugs are designed to electrically isolate unused bullet type " female" terminals in wiring harnesses, to prevent short circuits due to harness movement. Molded of tough electrically insulating black Nylon, these plugs are easily inserted with normal hand pressure and removable for addition of electrical accessories. DUM MY PLUGS ITEM NUMBE DP0030 TELEPHONE: (70) 53- / 53- micro plastics, inc. AX: (70) 53-7

117 PEVIOUS PAGE O CON TEN TS IN DEX A-Z WIE HANDLING HADWAE Micro Plastics New (Patented) " EZ" Strain elief Bushing is designed to save money. This Strain elief Bushing eliminates several costly and fatigue prone assembly steps. To install, the " EZ" Bushing hinged halves are simply folded over the wire or cable. No special orientation or alignment is necessary! Conventional Strain elief Pliers are applied to the specially designed gripped grooves and the bushing is inserted and locked in place in one smooth VII motion. The " EZ" Strain elief Bushing design incorporates a bullet shaped, streamlined nose and does away with the large cumbersome straps that complicate the assembly of the conventional style bushing in confined areas. Micro Plastics " EZ" Strain elief Bushings securely anchor, absorb and protect cables and wires from push/pull and twist forces and insulate them from irregular or sharp panel edges. These tough nylon bushings meet all Underwriters Laboratories stringent pull-out and temperature specifications. *EASILY INSTALLED *COM PETITIVELY PICED "EZ" STAIN ELIE BUSHINGS *SECUE IN USE *ULLY APPOVED DESCIPTION DIM ENSIONS MOUNTING HOLE BUSHINGS ITEM NUMBE UL/CSA COSS CABLE SIZE CABLE GAUGE DIATE LATS MAX PANEL LENGTH WIDTH DESCIPTION TYPE (AWG) A B THICKNESS C D E 3M P0KEZH * MPKEZH lat 0.50 X 0.0 (3, X 7,) HPN / (,7) 0.5 (,) 0.00 (,5) (,0) (,) 0.50 X 0.0 (3, X 7,) HPN / (,7) 0.5 (,) 0.00 (,5) 3M P0KEZS * MPKEZS lat 0.50 X 0.0 (3, X 7,) SPT / (,7) 0.5 (,) 0.00 (,) 0.50 (,7) 0.50 (,9) 0.50 X 0.0 (3, X 7,) SPT / (,7) 0.5 (,) 0.00 (,) 3M P0NEZH * MPNEZH lat 0.50 X 0.0 (3, X 7, ) HPN / (,7) 0.5 (,) 0.0 (,) (,0) (,) 3M P0NEZS * MPNEZS lat 0.50 X.0 (3, X 7,) SPT / (,7) 0.5 (,) 0.0 (,) (,) (,7) 0.0 X (, X 7,) SPT / (,7) 0.5 (,) 0.0 (,) 3M P0N3EZ * MPN3EZ ound (7,) SJT /3 0.5 (5,9) (,0) 0.0 (,) 0.70 (,) 0.0 (,) (9,0) SJ /3 0.5 (5,9) (,0) 0.0 (,) 0.05 (0,) SJT /3 0.5 (5,9) (,0) 0.0 (,) 3M P0P3EZ * MP P3EZ ound (7,) SJT /3 0.5 (5,9) (,0) 0.5 (3,) 0.70 (,) 0.0 (,) (9,0) SJ /3 0.5 (5,9) (,0) 0.5 (3,) 0.05 (0,) SJT /3 0.5 (5,9) (,0) 0.5 (3,) 3M P0NEZ * MPNEZ ound (7,) SJT / 0.5 (5,9) (,0) 0.0 (,) (,5) 0.0 (,) (9,9) SJO / 0.5 (5,9) *MINIMUM ODE QUANTITY,000 PIECES. **MINIMUM ODE QUANTITY 500 PIECES. ***MINIMUM ODE QUANTITY 50 PIECES. ****MINIMUM ODE QUANTITY 00 PIECES. mpsales@microplastics.com micro plastics, inc. WEBSITE: 7

118 PEVIOUS PAGE O CON TEN TS IN DEX A-Z WIE HANDLING HADWAE VII STAP TYPE " X" STAP TYPE " Y" STAP TYPE " Z" Micro Plastics' one piece Strain elief Bushings securely anchor, absorb and protect cables and wires from push/pull and twist forces and insulate them from irregular or sharp panel edges. These tough nylon bushings meet all Underwriters Laboratories' stringent pull-out and temperature specifications. They are easily and quickly installed with Micro Plastics special installation pliers or other hand or production tools. Stock sizes in black H.S. Nylon, temperature index 05 Centigrade (U.L. rated 9V). Micro Plastics can tool other sizes upon request. STAIN ELIE BUSHINGS DESCIPTION DINSIONS ITEM NUMBE 3M P0M0 * UL/CSA DESCIPTION MPM COSS ound CABLE SIZE 0.5 X 0.7 (3,9 X,7) CABLE TYPE AWN GAUGE (AWG) STAP TYPE "Y" MOUNTING HOLE BUSHINGS---- DIAM ETE A (9,5) LATS B.0330 (,) MAX PANEL THICKNESS C 0.0 (,) LENGTH D 0.0 (0,) WIDTH E 0.39 (9,9) 3M P0M50 * MPM5 ound 0.5 X 0.5 (3, X 3,9) AWN "Y" (9,5) (,) 0.0 (,) 0.0 (0,) 0.39 (9,9) 3M P0L0 * MPL lat 0.0 X 0.0 (3,0 X 3,9) SPT- / "Y" (9,5) (,) 0.5 (3,) 0.0 (0,) 0.0 (0,7) 3M P0P0 * MPP lat 0.0X0.0 (3,0 X 5,) SPT- / "Y".0375 (9,5) (,) 0.0 (,) 0.0 (0,) 0.0 (0,7) 3M P03P0 * MP3P lat 0.0 X 0.0 (3,0 X 5,) SP- SPT- / / "Y" 0.37 (,) (9,9) 0.0 (,) 0.0 (0,) 0. (,3) 3M P0K0 * MPK lat 0.50 X 0.00 (3, X 0,) 0.0 X (, X 7,) 0.0 X (, X 7,) 0.50 X 0.0 (3, X 7,) 0.50 X 0.0 (3, X 7,) SPT- HPN SPT- HPN SPT- /3 / / / / "Y" (,7) 0.0 (,7) (,) 0.95 (,) 0.55 (,) 3M P0KZ * MPKZ lat 0.50 X 0.00 (3, X 0,) 0.0 X (, X 7,) 0.0 X (, X 7,) 0.50 X 0.0 (3, X 7,) 0.50 X 0.0 (3, X 7,) SPT- HPN SPT- HPN SPT- /3 / / / / "Z" (,7) 0.0 (,7) (,) 0.95 (,) 0.55 (,) 3M P0L0 MPL0 lat 0.50 X 0.00 (3, X 0,) 0.0 X (, X 7,) 0.0 X (, X 7,) 0.50 X 0.0 (3, X 7,) 0.50 X 0.0 (3, X 7,) SPT- HPN SPT- HPN SPT- /3 / / / / "Z" (,7) 0.0 (,7) 0.7 (,7) 0.95 (,) 0.55 (,) *MINIMUM ODE QUANTITY,000 PIECES. **MINIMUM ODE QUANTITY 500 PIECES. ***MINIMUM ODE QUANTITY 50 PIECES. ****MINIMUM ODE QUANTITY 00 PIECES. TELEPHONE: (70) 53- / 53- micro plastics, inc. AX: (70) 53-7

119 PEVIOUS PAGE O CON TEN TS IN DEX A-Z WIE HANDLING HADWAE STAIN ELIE BUSHINGS DESCIPTION DINSIONS MOUNTING HOLE BUSHINGS---- ITEM NUMBE 3M P0K0 * UL/CSA DESCIPTION MPK COSS lat CABLE SIZE 0.0 X (3,0 X 7,) CABLE TYPE SPT- SPT- HPN GAUGE (AWG) /3 / / STAP TYPE "Y" DIAM ETE A (,7) LATS B 0.5 (,) MAX PANEL THICKNESS C 0.00 (,5) LENGTH D 0.0 (0,3) VII WIDTH E 0.57 (,7) 3M P0L0 * MPL lat 0.0 X (3,0 X 7,) SPT- SPT- HPN /3 / / "Y" (,7) 0.5 (,) 0.5 (3,9) 0.0 (0,3) 0.57 (,7) 3M P0N0 * MPN lat 0.0 X (3,0 X 7,) SPT- SPT- HPN /3 / / "Y" (,7) 0.5 (,) 0.0 (,) 0.0 (0,3) 0.57 (,7) 3M P0J0 * MPJ lat 0.0 X (3,0 X 7,) SPT- SPT- HPN /3 / / "Y" (,7) 0.5 (,) 0.03 (,) 0.0 (0,3) 0.57 (,7) 3M P05K0 * MP5K lat 0.50 x.00 (3, x 0,) SPT- / "Y" 0.5 (,3) (3,5) 0.5 (3,) 0.09 (5,5) 0.5 (5,9) 3M P05KN * MP5KN lat 0.50 x 0.00 (3, x 0,) 0.0 x (, x 7,) SPT- SPT- /3 / "Y" "Y" 0.5 (,3) (3,5) 0.0 (,) 0.09 (5,5) 0.5 (5,9) 3M P05N0 * MP5N ound 0.50 (,) 0.55 (,5) 0.90 (7,) SV SVT SV SVT HPD / / /3 /3 / "Y" (,7) X 0.55 (,7 X 3,) X 0.55 (,7 X 3,) 0.50 (,) 0.0 (,) 0.3 (,) 0.57 (,7) 3M P05P0 * MP5P ound 0.50 (,) 0.55 (,5) 0.90 (7,) SV SVT SV SVT HPD / / /3 /3 / "Y" (,7) X 0.55 (,7 X 3,) X 0.55 (,7 X 3,) 0.50 (,) 0.00 (.5) 0.3 (,) 0.57 (,7) 3M P05W0 * MP5W lat 0.0 x (3,0 x 7,) 0.0 x (, x 7,) 0.0 x 0.0 (, x 0,) 0.0 x (, x 9,) SPT- SPT- SPT- HPN /3 / /3 /3 "Y" 0.5 (,3) (3,5) 0.5 (3,) 0.09 (5,5) 0.5 (5,9) 3M P0N3 * MPN3 ound (9,0) 0.05 (0,) 0.30 (0,9) SJ SJT SJT /3 /3 /3 "Y" 0.5 (5,9) (,0) 0.0 (,) 0.50 (,7) (7,9) 3M P0N35 * MPN35 ound (9,9) (9,9) 0.05 (0,3).05 (0,3) (9,9) SJO SJ SJT SJO SJT / / / / / "Y" 0.5 (5,9) (,0) 0.0 (,) 0.50 (,7) (7,9) 3M P0N0 ** MPN ound (7,) SJT SJO / / "Y" 0.5 (5,9) (,0) 0.0 (,) 0.50 (,7) (7,9) 3M P0N ** MPN lat 0.0 X (3,0 X 7,) SPT- /3 "Y" 0.5 (5,9) (,) 0.0 (,) 0.00 (5,) 0.90 (7,5) *MINIMUM ODE QUANTITY,000 PIECES. **MINIMUM ODE QUANTITY 500 PIECES. ***MINIMUM ODE QUANTITY 50 PIECES. ****MINIMUM ODE QUANTITY 00 PIECES. mpsales@microplastics.com micro plastics, inc. WEBSITE: 9

120 PEVIOUS PAGE O CON TEN TS IN DEX A-Z WIE HANDLING HADWAE VII ITEM NUMBE 3M P0N5 ** STAIN ELIE BUSHINGS DESCIPTION DINSIONS MOUNTING HOLE BUSHINGS---- UL/CSA DESCIPTION MPN5 COSS lat CABLE SIZE 0.0 X (3,0 X 7,) CABLE TYPE SPT- GAUGE (AWG) /3 STAP TYPE "Y" DIAM ETE A 0.5 (5,9) LATS B 0.55 (3,) MAX PANEL THICKNESS C 0.0 (,) LENGTH D 0.00 (5,) WIDTH E 0.90 (7,5) 3M P0P3 ** MPP3 ound (,3-9,) SJ SJT SJO /3 /3, /3 /3 "Y" 0.5 (5,9) (,0) 0.5 (3,) 0.50 (,7) (7,9) 3M P0P35 ** MPP35 ound (,3-9,) SJ SJT SJO /,/3,/ /,/ /,,,/3 "Y" 0.5 (5,9) (,0) 0.5 (3,) 0.50 (,7) (7,9) 3M P0L0 ** MPL ound (,3-0,9) SJ SJT SJO /,/3 /,/3 Z 0.5 (5,9) (,0) 0.5 (3,) 0. (,9) 0.75 (,) 3M P0P0 ** MPP ound (7,) SJ SJT SJO / / / "Y" 0.5 (5,9) (,0) 0.5 (3,) 0.50 (,7) (7,9) 3M P0W0 * MPW ound (7,) SJ SJT SJO / / / "Y" (,7) 0.5 (,) (,3) 0.37 (,) 0.53 (,3) 3M P07K0 *** MP7K ound 0.35 X 0.30 (,3 X 9,) SJ SJT SJO /,/,/3,/, /3,/3 /,/3,/ "Z" 0.75 (,) (9,) 0.5 (3,) (9,) 0.9 (3,) 3M P07P0 ** MP7P ound 0.30 (9,) (9,) 0.05 (0,3) 0.30 (0,9) 0.05 (0,3) 0.30 (0,9) 0.05 (0,3) (9,9) (9,9) 0.05 (0,3) SJTO SJT S S STO STO S S STO STO / /3 /3 /3 /3 /3 / / / / "X" (9,0) 0.0 (,) 0.5 (3,) 0.75 (,9) 0.30 (,0) 3M P07K30 *** MP7K3 ound (,3-9,) SJ SJT SJO /3,/ / /3,/ "Z" 0.75 (,) (9,) 0.5 (3,) (9,) 0.9 (3,) 3M P07P30 ** MP7P3 lat 0.0 X 0.0 (, X 0,) SPT- /3 "Z" 0.73 (,7) 0.57 (,7) 0.5 (3,) (,9) 0.75 (9,9) 3M P07W0 *** MP7W ound (9, - 0,) (9,9-0,9) SJT S STO /3 /3 /3,/3 /,,3,/3 "Z" 0.75 (,) (9,) 0.5 (3,) (9,) 0.9 (3,) 3M POP0 *** MPP ound (3,5-5,) S ST /,/3 / "Z" 0.75 (,) 0.0 (,3) 0.5 (3,) 0. (0,) 0.9 (3,) 3M P09P0 **** MP9P ound (,) 0.0 (,3) 0.50 (,5) (7,7) S S S S / /3 0/ 0/3 "Y".093 (7,7).5 (,5).093 (7,7).7 (30,).000 (5,).000 (5,).000 (5,).000 (5,) 0. (7,) 0. (7,) 0. (7,) 0. (7,) (5,) (5,) (5,) (5,).5 (30,).5 (30,).5 (30,).5 (30,) *MINIMUM ODE QUANTITY,000 PIECES. **MINIMUM ODE QUANTITY 500 PIECES. ***MINIMUM ODE QUANTITY 50 PIECES. ****MINIMUM ODE QUANTITY 00 PIECES. 0 TELEPHONE: (70) 53- / 53- micro plastics, inc. AX: (70) 53-7

121 PEVIOUS PAGE O CON TEN TS IN DEX A-Z WIE HANDLING HADWAE STAIN ELIE BUSHINGS DESCIPTION DINSIONS MOUNTING HOLE BUSHINGS---- ITEM NUMBE 3M P30-0 ** UL/CSA COSS DESCIPTION MP30- lat CABLE SIZE 0.0 X 0.0 (, X 0,) 0.0 X (3,0 X 7,) CABLE TYPE SPT- SPT- GAUGE (AWG) /3 STAP TYPE "Z" DIAM ETE A 0.50 (,) LATS B (,5) MAX PANEL THICKNESS C 0.5 (3,) LENGTH D 0.70 (7,0) VII WIDTH E (9,) 3M P0300 * MP30 lat 0.50 X 0.00 (3, X 0,) SPT- /3 "Z" 0.5 X (5,9 X9,5) 0.5 (5,9) 0.00 (,5) 0.0 (,) 0.0 (,7) 0.0 X 0.0 (, X 0,) SPT- /3 0.5 X (5,9 X 9,5) 0.5 (5,9) 0.00 (,5) 0.0 (,) 0.0 (,7) 0.30 X 0.50 (, X,5) SPT-3 /3 0.5 X (5,9 X 9,5) 0.5 (5,9) 0.00 (,5) 0.0 (,) 0.0 (,7) 3M P3-0 *** MP3- lat (0, -,) SJT /3 "Z" 0.75 (,) 0.0 (,3) 0.5 (3,) 0. (0,) 0.9 (3,) ound 0.0 X 0.5 (,5 X 0,) SPT-3 /3 3M P33-0 ** MP33-0 lat 0.5 X 0.5 (, X 0,) SPT-3 /3 "Z" X 0.75 (9, X,) 0.75 (,) 0.5 (3,) (9,5) 0.95 (,7) 0.0 X 0.0 (, X 0,) SPT-3 / X 0.75 (9, X,) 0.75 (,) 0.5 (3,) (9,5) 0.95 (,7) 0.0 X 0.55 (, X 3,3) HPN / X 0.75 (9, X,) 0.75 (,) 0.5 (3,) (9,5) 0.95 (,7) 3M P3-X *** MP3-X lat 0.0 X 0.0 (, X 0,7) SPT-3 /3 "X" 0.75 (,) 0.0 (,3) 0.5 (3,) 0. (0,) 0.9 (3,) 0.90 X 0.50 (7, X,5) /3 90 ANGLE STAIN ELIE BUSHINGS 3M P3L0 * MP3L lat 0.0 X 0.0 (3,0 X 5,) SPT- / "Z" 0.37 (,) (9,9) 0.0 (,) (,7) 0.50 (,9) 3M PL0 MPL lat 0.50 X 0.0 (3, X 7,) SPT- /,/ "Z" (,7) 0.50 (,) 0.00 (,5) 0.7 (7,5) 0.53 (,3) 0.0 X (, X 7,) HPN / 3M P5L0 * MP5L ound 0.50 X 0.5 (, X,7) SV /,/3 "Z" (,7) 0.50 (,) 0.00 (,5) 0.7 (7,5) 0.5 (,3) 3M PL0 ** MPL lat.50 X.00 () X (0,) SP- /3 Z 0.5 (,3) 0.55 (3,3).5 (3,) (,) (5,9).0 X.370 (,) X (9,) HPN /3.90 X.350 (,) X (,9) SPT-3 /.00 X.370 (5, X (9,) / *MINIMUM ODE QUANTITY,000 PIECES. **MINIMUM ODE QUANTITY 500 PIECES. ***MINIMUM ODE QUANTITY 50 PIECES. ****MINIMUM ODE QUANTITY 00 PIECES. mpsales@microplastics.com micro plastics, inc. WEBSITE:

122 PEVIOUS PAGE O CON TEN TS IN DEX A-Z WIE HANDLING HADWAE VII STAIN ELIE TOOLS STANDAD ITEM NUMBE 3MPT000 Micro Plastics' Standard adjustable Strain elief Assembly Pliers. An indispensable tool for fast, accurate assembly of bushings. EGONOMIC ITEM NUMBE 3MPET000 Micro Plastics' Adjustable Ergonomic Strain elief Tool has been carefully designed to help reduce the wrist fatigue associated with bushing installation. The handles are preset to a specified angle, allowing the hand and wrist of the operator to naturally align during normal use. This tool is fully adjustable and will install all sizes of micro plastics strain relief bushings. PNEUMATIC PNEUMATIC EGONOMIC ITEM NUMBE ITEM NUMBE 3PMPT000 3PMPET000 Micro Plastics' Pneumatic-Ergonomic Strain Micro Plastics' Pneumatic Strain elief Installation Tool is designed to aid in rapid assembly of strain relief bushings. The easy finger tip actuation of this air tool greatly lessens the gripping power necessary to install bushings and reduces the hand and wrist fatigue generated during moderate to high volume manufacturing. The tool operates on standard shop air from 50 to 90 PSI. Low weight, only ounces. Tools are configured prior to shipping. or specific sizes, please specify strain relief bushing sizes to be installed when ordering. elief Installation Tool has been carefully designed to help reduce the wrist fatigue associated with the rapid assembly of strain relief bushings. The easy trigger-type actuation of this air tool, in combination with the ergonomic angle of the hand grip, allow natural alignment of the wrist and hand during normal bushing installation. The tool operates on standard shop air from PSI. Lightweight, only ounces. Tools are configured prior to shipping. Please specify strain relief bushing sizes to be installed when ordering. NOT AVAILABLE O HOLE SIZES LAGE THAN " Nylon "EZ" twist lock with integral label area for writing. Permanent ink pens, felt tip pens, pressure-sensitive adhesive labels, or even Post-it notes can be used on polished label area. LABEL TWIST LOCK ITEM NUMBE BUNDLE DIATE L 3EZLB050 " (,35) 3-3/3 (7,59) 3EZLB0375 " (9,53) 3-9/3 (3,3) TELEPHONE: (70) 53- / 53- micro plastics, inc. AX: (70) 53-7

123 PEVIOUS PAGE O CON TEN TS IN DEX A-Z WIE HANDLING HADWAE VII Micro Plastics Beaded Ties provide economical temporary or permanent bundling, harnessing, tagging and identification marking. Beaded Ties smooth, rounded configuration elimates damage to wire and cable insulation. No tools are necessary. Ties can be disassembled and reused. Beaded Ties are available in Nylon and Polyethylene. Special colors are available upon request. BEADED TIES ITEM NUMBE DESCIPTION LENGTH 305N 5 N (0) 3000N 00 N (5) 3000N 00 N (03) 3000N 000 N 0 (5) HEAVY DUTY POLYETHYLENE BEADED TIES ITEM NUMBE DESCIPTION LENGTH 305P 5 P (0) 3000P 3000P 00 P 00 P 3000P 000 P HEAVY DUTY POLYETHYLENE BEADED TIES AE MOLDED IN YELLOW. (5) (03) 0 (5) LABEL BEADED TIE Nylon beaded tie with integral label area for writing. Permanent ink pens, felt tip pens, pressure-sensitive adhesive labels, or even Post-it notes can be used on polished label area. The "LP" pointed version can be used to pierce thin materials. The "LB" version has a blunt tip for general use. "LB" VESION ITEM NUMBE A- WIDTH B-LENGTH L-OVEALL LENGTH +/- /3 +/- /3 +/- / 3LB000N /" (,7) -5/' (33,3) " 3LB000N /" (,7) -5/' (33,3) " "LP" VESION ITEM NUMBE A- WIDTH B-LENGTH L-OVEALL LENGTH +/- /3 +/- /3 +/- / 3LP000N /" (,7) -5/' (33,3) " 3LP000N /" (,7) -5/' (33,3) " egistered trade mark of the 3M Corporation. mpsales@microplastics.com micro plastics, inc. WEBSITE: 3

124 PEVIOUS PAGE O CON TEN TS IN DEX A-Z WIE HANDLING HADWAE VII Spiral Wrap is an ideal covering used to bundle and protect tubing, wires and other types of conductors. Spiral wrap can be used on virtually any item with a diameter of /" to 7". Polyethylene Natural Spiral Wrap is a lightweight low cost material that is good for general indoor applications. Polyethylene is not affected by ordinary solvents and is resistant to abrasion. Polyethylene spiral wrap is easy to install, either during production or after final assembly. Ultra Violet UV esistant Black Spiral Wrap is designed for outdoor use. Black UV esistant Spiral Wrap has all of the fine qualities of Natural Spiral Wrap with the additional advantage of containing an ultraviolet absorber. Black UV esistant Spiral Wrap will withstand direct sunlight for long periods of time. OU PACKAGING THODS AE AVAILABLE O SPIAL WAP. EE TO THE CHAT ON THE OPPOSITE PAGE. NATUAL SPIAL WAP ITEM WALL BUNDLE NUMBE O.D. THICKNESS ANGE SPWNA /".03 /" to " SPWNA ".035 3/" to " SPW5NA ".00 3/" to " SPW3NA ".00 3/" to " SPW37NA ".05 5/" to 3" SPW3NA ".0 5/" to 3" SPWNA /".030 " to 3" SPW9NA /".00 " to " SPW50NA /".0 " to " SPW5NA /".07 " to " SPWNA ".0 " to /" SPW75NA ".05 " to 5" SPW0NA ".070 " to 7" SPWNA ".095 " to 7" BLACK UV ESISTANT SPIAL WAP ITEM WALL BUNDLE NUMBE O.D. THICKNESS ANGE SPWBK /".03 /" to " SPWBK ".035 /" to " SPW5BK ".00 3/" to " SPW3BK ".00 5/" to 3" SPW37BK ".05 5/" to 3" SPW3BK ".0 5/" to 3" SPWBK /".030 " to 3" SPW9BK /".00 " to " SPW50BK /".0 " to " SPW5BK /".07 " to " SPWBK ".0 " to /" SPW75BK ".05 " to 5" SPW0BK ".070 " to 7" SPWBK ".095 " to 7" TELEPHONE: (70) 53- / 53- micro plastics, inc. AX: (70) 53-7

125 PEVIOUS PAGE O CON TEN TS IN DEX A-Z WIE HANDLING HADWAE luorescent Safety Wrap is an expandable plastic cable harness that can be used like tape. Designed with potentially hazardous situations in mind, luorescent Safety Wrap will help make loose wires, hanging cables, hoses and tubing more easily seen. VII IMPOVES APPEAANCE, SAETY AND DUABILITY O YOU PODUCTS. COLO CODES: ADD COLO CODES TO THE END O EACH ITEM NUMBE TO SPECIY COLO SELECTION. LUOESCENT SAETY WAP D = LUOESCENT ED G = LUOESCENT GEEN YW = LUOESCENT YELLOW ITEM WALL BUNDLE NUMBE O.D. THK. ANGE SPWS /".03 /" to " SPWS ".035 3/" to " SPW5S ".00 3/" to " SPW3S ".00 5/" to 3" SPW37S ".05 5/" to 3" SPW9S /".00 " to " SPW50S /".0 " to " SPWS ".0 " to -/" SPW75S ".05 " to 5" SPW0S ".070 " to 7" OU PACKAGING THODS AE AVAILABLE O SPIAL WAP. EE TO THE CHAT BELOW. O LAGE QUANTITY BULK SPOOL ODES, ADD THE LETTES SPL TO THE END O THE PAT NUMBE. SPIAL WAP/LUOESCENT SAETY WAP, STANDAD PACKAGING OPTIONS SPIAL WAP CAN BE CUT TO M EET SPECIAL LENGTH EQUIENTS, CALL O DETAILS. (Best Pricing or Volume Users) OUTSIDE EET PE EET PE EET PE EET PE DIAM ETE PAYOUT BOX POLYETHYLENE BAG SPOOL BULK SPOOL /' 00' O 50' " 00' O 50' " 00' O 50' /" 00' " 5' " 5' " 00' O 50' 00' O 50' 00' O 50' 50' 50' " " 00' 00' 00' 00' 00' 500',000' 500' 50' 50' 00' mpsales@microplastics.com micro plastics, inc. WEBSITE: 5

126 PEVIOUS PAGE O CON TEN TS IN DEX A-Z WIE HANDLING HADWAE VII Micro Plastics " EZ" Twist Lock Bundling Ties offers a fast, economical way to securely position and hold wire, cable or tubing. A single twist of the finger locks the bundle together. Another twist will open the lock to add or remove wire to the bundle.the reusable "EZ" Twist Lock is molded of tough, resilient Nylon / (UL 9V). The following standard sizes are available from stock in natural nylon. "EZ" TWIST LOCKS ITEM NUMBE DESCIPTION H B 3EZ05N 3EZ050N 3EZ0375N 3EZ0500N 3EZ000N 3EZ0750N 3EZ0950N 3EZ5N 3EZ375N 3EZ500N 3EZ750N /" LOCK " LOCK " LOCK /" LOCK " LOCK " LOCK 5/" LOCK /" LOCK " LOCK /" LOCK " LOCK Dyed colors can be furnished with a slight extra charge. Other sizes will be tooled on request..75 (,).75 (,).0 (7,).0 (30,5). (3,0).55 (39,).7 (7,5).7 (55,).7 (7,).93 (7,) 3. (7,9). /. (,0 / 3,5).0 /.7 (5,0 /,).30 /.0 (7, / 0,).0 /.50 (0, /.7).55 /.5 (3,9 /,5).70 /.0 (7, / 0,3).90 /.00 (, / 5,).0/.30 (30,5 / 33,0).5/.55 (3, / 39,).55/.5 (39, /,9).90/.00 (,3 / 50,) DOUBLE "EZ" TWIST LOCKS ITEM NUMBE H L B AND B 3DBEZ000 3DBEZ000 - (9,) -3/3 (7,) /" (7,) /" (7,).30/.0 (7,) / (0,).0/.50 (0,) / (,70) "EZ" TWIST LOCK IN CLIP BASE STANDAD LENGTH IS OM BUNDLE DIATE TO TOP O /3 PANEL ITEM BUNDLE TOTAL MOUNTING PANEL NUMBE DIAM ETE LENGTH LENGTH HOLE ANGE 3EZ037B05 " (9,53).00 (5,0) -/3 (,0).7 (,75) /3 (0,79) - (,35) 3EZ037B037 " (9,53).35 (,00) -5/3 (5,).7 (,75) /3 (0,79) - (,35) 3EZ037B050 " (9,53).37 (.0) -9/3 (,).7 (,75) /3 (0,79) - (,35) 3EZ037B0 " (9,53).555 (,0) -/3 (5,59).7 (,75) /3 (0,79) - (,35) 3EZ050C037 /" (,70).3 (,0) -9/3 (,).50 (,35) /3 (0,79) - (,35) 3EZ050C050 /" (,70.7 (,35) -3/ (50,39).50 (,35) /3 (0,79) - (,35) 3EZ050C0 /" (,70).59 (5,) -/ (53,9).50 (,35) /3 (0,79) - (,35) 3EZ050C00 /" (,70).9 (3,93) -5/3 (,7).50 (,35) /3 (0,79) - (,35) 3EZ0C037 (5,).39 (,0) -5/ (9,).50 (,35) /3 (0,79) - (,35) 3EZ0C050 3EZ0C0 (5,) (5,). (,3).595 (5,) -3/ (5,99) -3/ (55,5).50 (,35).50 (,35) /3 (0,79) - (,35) /3 (0,79) - (,35) 3EZ0C00 (5,).935 (3,75) -35/ (,9).50 (,35) /3 (0,79) - (,35) TELEPHONE: (70) 53- / 53- micro plastics, inc. AX: (70) 53-7

127 HOLE SIZE.7 PANEL THICKNESS.030 /.07 "EZ" TWIST LOCK SUPPOTS WIE HANDLING HADWAE ITEM NUMBE DESCIPTION A B C 3EZS050N BUNDLE DIA..95 (.3).7 (,5).7 (7,0) 3EZS050N0030 3EZS000N0030 3EZS0375N0030 3EZS050N05 3EZS05N00 Q TABLE PEVIOUS PAGE.50 BUNDLE DIA..00 BUNDLE DIA..375 BUNDLE DIA..50 BUNDLE DIA..5 BUNDLE DIA..0 (0,7).0 (0,).050 (,7).5 (5,).0 (0,7) O CON TEN TS.0 (9,97). (,).0 (7,0). (30,07).70 (3,) VII Micro Plastics "EZ" Twist Lock Printed Circuit Board Supports feature a uniquely designed locking base which is easily snapped into the chassis by hand. Cables and wires can be loaded and unloaded with a simple twist of the fingers, and are supported above the board eliminating possible contact with hot components. Parts are stocked in natural Nylon /. Other colors can be furnished with a slight extra charge..53 (,5).05 (5,).350 (,9).53 (,5).0 (5,75) IN DEX A-Z "EZ" TWIST LOCK SUPPOTS ITEM NUMBE DESCIPTION PANEL THICKNESS H W 3EZS050C BUNDLE DIA. / (,57) 7/ (,3) 3/3 (,) 3EZS0375C BUNDLE DIA. / (,57) -5/ (7,37) (9,0) 3EZS0500C BUNDLE DIA. / (,57) -3/ (30,5) 7/ (5,) "EZ" TWIST LOCK SUPPOTS ITEM NUMBE DESCIPTION PANEL THICKNESS H W 3EZS050B BUNDLE DIA..07 (,9 /.09 (,77) 7/ (,3) 3/3 (,) 3EZS0375B BUNDLE DIA..07 (,9 /.09 (,77) -5/ (7,37) (9,0) 3EZS0500B BUNDLE DIA..07 (,9 /.09 (,77) -3/ (30,5) 7/ (5,) mpsales@microplastics.com micro plastics, inc. WEBSITE: 7

128 PEVIOUS PAGE O CON TEN TS IN DEX A-Z CICUIT BOAD HADWAE VIII Accurately positions capacitors or discrete components on P.C. Board. Material: Type Nylon NYLON CAPACITO MOUNTS ITEM NUMBE DESCIPTION A B C D E CM000 CM050 CM-00 CM (,5).50 (3,).05 (,).05 (,).0 (0,5).0 (0,5).050/.070 (,7)/(,7).090/.5 (,9)/(3,).0 (,57).70 (,).090 (,9).5 (3,) CM000 CM (5,0).05 (,).0 (0,5).090 (,9).90 (7,37).090 (,9) BOTH ENDS HOLE DIAM ETE.5 PANEL THICKNESS /" NYLON P.C.B. SUPPOTS ITEM NUMBE DESCIPTION A 7M LLP07 MLLP 7.7 (,75) TWO - PIECE NYLON ASTENE O USE WITH EDGE CONNECTO ASSEMBLY Body Item " A" is inserted through the connector and through the chassis. Pin Item " B" then is pushed or tapped into the body to secure the connector to the chassis. Head design of the pin permits easy removal, connector then can be easily replaced. BODY ITEM "A" ITEM NUMBE C D 7TP000A.09 (,7).305 (7,7) 7TP000A.0 (,79).350 (,) 7TP0003A.0 (,79).0 (,9) 7TP000A.09 (,3).30 (,3) PIN ITEM "B" ITEM NUMBE B A 7TP000B.330 (,3).09 (,75) 7TP000B.30 (9,).09 (,75) 7TP0003B.55 (,55).09 (,75) 7TP000B.30 (,3).0 (,57) TELEPHONE: (70) 53- / 53- micro plastics, inc. AX: (70) 53-7

129 PEVIOUS PAGE O CON TEN TS IN DEX A-Z CICUIT BOAD HADWAE VIII NYLON LOCKING HEX SPACES ITEM NUMBE DESCIPTION A 7M PH007 MPH 7.7 (7,0) Economical Locking Spacers eliminate screws, nuts and lock washers in mounting P.C. boards on metal chassis or stacking in multiple tiers. Unique locking clips provide a mechanically secure, reusable connection in predrilled or punched holes while saving considerable assembly time. ITS HOLE SIZE O.5 +/-.00 BOAD THICKNESS / EMALE NYLON CICUIT BOAD POSTS ECOENDED HOLE SIZE.5 PANEL THICKNESS /" NOTE: SEL-THEADING POSTS AE DESIGNED O USE WITH A # SEL-TAPPING SCEW. SEL-THEADING ITEM NUMBE DESCIPTION "L" 7STP0050* STP (,35) 7STP00375 STP (9,53) 7STP00500 STP (,70) 7STP005 STP 5.5 (5,) 7STP00750 STP (9,05) 7STP0075 STP (,3) 7STP0000 STP (5,0) 7STP05 STP 5.5 (,5) 7STP050 STP (3,75) 7STP00 STP 0.0 (35,7) * " length has a thread depth of 3/". THEADED ITEM NUMBE DESCIPTION "L" 7TP0050* TP (,35) 7TP00375 TP (9,53) 7TP00500 TP (,70) 7TP005 TP 5.5 (5,) 7TP00750 TP (9,05) 7TP0075 TP (,3) 7TP0000 7TP05 7TP050 7TP00 TP 000 TP 5 TP 50 TP (5,0).5 (,5).50 (3,75).0 (35,7) * " length has a thread depth of 3/". mpsales@microplastics.com micro plastics, inc. WEBSITE: 9

130 PEVIOUS PAGE O CON TEN TS IN DEX A-Z CICUIT BOAD HADWAE VIII ITS ECOENDED HOLE SIZE O.5 - PANEL THICKNESS /" NYLON LOCKING P.C.B. SUPPOT ON ADHESIVE BASE ITEM NUMBE DESCIPTION "L" 7LAD07 LAD 7.7 (,75) 7LAD050 LAD (,35) 7LAD0375 LAD (9,53) 7LAD0500 LAD (,70) 7LAD05 LAD 5.5 (5,) 7LAD0750 LAD (9,05) 7LAD075 LAD (,3) 7LAD000 LAD (5,0) 7LAD5 LAD 5.5 (,5) MOLDED ACETAL IVETS ITEM NUMBE DESCIPTION SHANK A H LENGTH IV00 IV.05 (,).3 (3,3).05 (,7) / (3,) IV00 IV.05 (,).3 (3,3).05 (,7) 3/ (,7) IV003 IV 3.05 (,).3 (3,3).05 (,7) (,35) IV00 IV.05 (,).3 (3,3).05 (,7) 5/ (7,9) IV005 IV 5.05 (,).3 (3,3).05 (,7) (9,53) IV00 IV.05 (,).3 (3,3).05 (,7) 7/ (,) IV007 IV 7.05 (,).3 (3,3).05 (,7) / (,70) IV0 IV.5 (3,).50 (,35).0 (,73) / (3,) IV0 IV.5 (3,).50 (,35).0 (,73) 3/ (,7) IV03 IV3.5 (3,).50 (,35).0 (,73) (,35) IV0 IV.5 (3,).50 (,35).0 (,73) 5/ (7,9) IV05 IV5.5 (3,).50 (,35).0 (,73) (9,53) IV0 IV.5 (3,).50 (,35).0 (,73) 7/ (,) IV07 IV7.5 (3,).50 (,35).0 (,73) / (,70) IV0 IV.5 (3,).50 (,35).0 (,73) 9/ (,9) IV09 IV9.5 (3,).50 (,35).0 (,73) (5,) IV00 IV0.5 (3,).50 (,35).0 (,73) / (7,) IV0 IV.5 (3,). (5,5).090 (,9) / (3,) IV0 IV.5 (3,). (5,5).090 (,9) 3/ (,7) IV03 IV3.5 (3,). (5,5).090 (,9) (,35) IV0 IV.5 (3,). (5,5).090 (,9) 5/ (7,9) IV05 IV5.5 (3,). (5,5).090 (,9) (9,53) IV0 IV.5 (3,). (5,5).090 (,9) / (,70) IV050 IV50.5 (3,).55 (,).05 (,30) (,35) IV055 IV55.5 (3,).55 (,.05 (,30) (9,53) 30 TELEPHONE: (70) 53- / 53- micro plastics, inc. AX: (70) 53-7

131 PEVIOUS PAGE O CON TEN TS IN DEX A-Z CICUIT BOAD HADWAE NYLON P.C.B. SUPPOTS "LOCK/TENSION" SEIES THE "LTP" SEIES IS DESIGNED TO SECUELY LOCK TO THE BOTTOM CHASSIS AND SNAP INTO TOP BOAD. VIII ITEM NUMBE DESCIPTION B 7LTP07 3/" LOCK/TENSION.307 (7,0) 7LTP050 " LOCK/TENSION.35 (9,7) 7LTP0375 7LTP037 7LTP0500 7LTP05 7LTP0750 7LTP075 7LTP000 7LTP5 7LTP50 7LTP375 7LTP750 " 7/" /" " " 7/" " /" " " " LOCK/TENSION LOCK/TENSION LOCK/TENSION LOCK/TENSION LOCK/TENSION LOCK/TENSION LOCK/TENSION LOCK/TENSION LOCK/TENSION LOCK/TENSION LOCK/TENSION.95 (,57).557 (,5).5 (5,).75 (,9).70 (,0).995 (5,7).0 (,5).5 (3,).370 (3,0).95 (37,97).0 (5,97) Micro Plastics Circuit Board Supports eliminate screws nuts, and lockwashers in mounting printed circuit boards on metal chassis or stacking in multiple tiers. Unique locking designs provide mechanically secure, reusable connection in predrilled or punched holes while saving considerable assembly time and expense. NYLON P.C.B. SUPPOTS "LOCK/ LOCK" SEIES THE "LLP" SEIES IS DESIGNED TO SECUELY LOCK BOTH THE CHASSIS END AND THE PINTED CICUIT BOAD ON TOP. ITEM NUMBE DESCIPTION B 7LLP05 / LOCK/LOCK. (5,33) 7LLP07 3" LOCK/LOCK.307 (7,0) 7LLP050 " LOCK/LOCK.35 (9,7) 7LLP0375 " LOCK/LOCK.95 (,57) 7LLP037 7/" LOCK/LOCK.557 (,5) 7LLP0500 /" LOCK/LOCK.5 (5,) 7LLP05 " LOCK/LOCK.75 (,9) 7LLP0750 " LOCK/LOCK.70 (,0) 7LLP075 7/" LOCK/LOCK.995 (5,7) 7LLP000 " LOCK/LOCK.0 (,5) 7LLP5 /" LOCK/LOCK.5 (3,) 7LLP50 " LOCK/LOCK.370 (3,0) 7LLP375 " LOCK/LOCK.95 (37,97) 7LLP750 " LOCK/LOCK.0 (5,97) mpsales@microplastics.com micro plastics, inc. WEBSITE: 3

132 PEVIOUS PAGE O CON TEN TS IN DEX A-Z CICUIT BOAD HADWAE VIII HOLE SIZE.5 PANEL THICKNESS /" NYLON M ALE P.C.B. SUPPOT POSTS "LOCKING" SEIES HOLE SIZE.5 PANEL THICKNESS /" *THEAD LENGTH IS /3" NYLON M ALE P.C.B. SUPPOT POSTS "M TP" SEIES ITEM NUMBE DESCIPTION A ITEM NUMBE DESCIPTION L 7LMTP0050 LMTP (,35) 7MTP005 MTP 5.5 (3,) 7LMTP00375 LMTP (9,53) 7MTP007 MTP 7.7 (,75) 7LMTP00500 LMTP (,70) 7MTP0050 MTP (,35) 7LMTP005 LMTP 5.5 (5,) 7MTP00375 MTP (9,53) 7LMTP00750 LMTP (9,05) 7MTP00395* MTP (0,03) 7LMTP0075 LMTP (,3) 7MTP00500 MTP (,70) 7LMTP0000 LMTP (5,0) 7MTP005 MTP 5.5 (5,) 7LMTP05 LMTP 5.5 (,5) 7MTP00750 MTP (9,05) 7MTP0075 MTP (,3) Micro Plastics' Printed Circuit board Support Guides are an economical and fast solution to mount P.C. Boards. Card insertion is simple and fast. The smooth positive channel guides the P.C. Board and firmly supports and protects the board. Guides are molded of tough, electrically insulating nylon / and are designed to snap into pre-punched holes in the chassis. Micro Plastics has available the eight most popular sizes. Other sizes will be tooled on request. NYLON P.C. BOAD CAD GUIDES The Printed Circuit Board Card Guide is designed to fit a.5" +.003" -.00" front diameter hole and a.0" +/-.005" x." slot rear hole. ITEM NUMBE DESCIPTION A B CGS0050 /" GUIDE.5.0 CGS " GUIDE CGS /" GUIDE CGS0000 " GUIDE CGS0050 /" GUIDE.5.0 CGS GUIDE CGS /" GUIDE CGS0000 " GUIDE TELEPHONE: (70) 53- / 53- micro plastics, inc. AX: (70) 53-7

133 PEVIOUS PAGE O CON TEN TS IN DEX A-Z CICUIT BOAD HADWAE Economical locking spacers eliminate screws, nuts and lock washers in mounting P.C. Boards on metal chassis or stacking in multiple tiers. Unique locking clips provide a mechanically secure, reusable connection in predrilled or punched holes while saving considerable assembly time. The new improved " MSP" series greatly increases stability and integrity of the printed circuit board assembly, while improving the pullout strength of the connection. VIII NYLON P.C.B. POSTS "MP" SEIES ITEM NUMBE DESCIPTION "A" * 7M P005 7M P0050 7M P003 7M P M P0037 7M P0037S 7M P M P005 7M P M P0075 7M P0000 7M P0950 MP 5 MP 50 MP 3 M P 375 MP 37 MP 37S MP 500 MP 5 MP 750 MP 75 MP000 MP950 PATS CAN BE UNISHED COLO CODED O IDENTIICATION. ECOENDED HOLE SIZE.5" +/-.5 (3,).50 (,35).3 (7,9).375 (9,53).37 (,).37 (,).500 (,70).5 (5,).750 (9,05).75 (,3).00 (5,0).95 (9,53).00" PANEL THICKNESS /" NYLON P.C.B. POSTS "MSP" SEIES ITEM NUMBE DESCIPTION A 7MSP005 7MSP005 7MSP0050 7MSP003 7MSP MSP0037 7MSP MSP005 7MSP MSP MSP0075 7MSP0000 7MSP000 MSP 5 MSP 5 MSP 50 MSP 3 MSP 375 MSP 37 MSP 500 MSP 5 MSP 700 MSP 750 MSP 75 MSP000 MSP00.5 (3,).5 (3,9).50 (,35).3 (7,9).375 (9,53).37 (,).500 (,70).5 (5,).700 (7,7).750 (9,05).75 (,3).00 (5,0).0 (5,7) NYLON KEY-SLOT P.C.B. POSTS ITEM NUMBE DESCIPTION A 7KYP007 KYP 7 3/ (,) 7KYP0050 KYP 50 (,) 7KYP00375 KYP 375 (9,5) 7KYP00500 KYP 500 / (,7) 7KYP005 KYP 5 (5,9) 7KYP00750 KYP 750 (9,) 7KYP0075 KYP 75 7/ (,) 7KYP0000 KYP 000 (5,) or use in combination with a key-slot hole so that the circuit board may be removed for repairs. mpsales@microplastics.com micro plastics, inc. WEBSITE: 33

134 PEVIOUS PAGE O CON TEN TS IN DEX A-Z CICUIT BOAD HADWAE VIII NYLON P.C.B. SUPPOTS "LCSP" SEIES ITEM NUMBE DESCIPTION "A" 7LCSP005 LCSP 5.5 (3,) 7LCSP0050 LCSP (,35) 7LCSP003 LCSP 3.3 (7,9) 7LCSP00375 LCSP (9,53) 7LCSP0037 LCSP (,) 7LCSP00500 LCSP (,70) 7LCSP005 LCSP 5.5 (5,) 7LCSP00750 LCSP (9,05) 7LCSP0075 LCSP (,3) 7LCSP0000 LCSP (5,0) SPING END ITS.5" HOLE LOCK O TENSION END ITS.5" HOLE PANEL THICKNESS / NYLON P.C.B. SUPPOTS "TCSP" SEIES ITEM NUMBE DESCIPTION "A" 7TCSP005 7TCSP0050 7TCSP003 7TCSP TCSP0037 7TCSP TCSP005 7TCSP TCSP0075 7TCSP0000 TCSP 5 TCSP 50 TCSP 3 TCSP 375 TCSP 37 TCSP 500 TCSP 5 TCSP 750 TCSP 75 TCSP (3,).50 (,35).3 (7,9).375 (9,53).37 (,).500 (,70).5 (5,).750 (9,05).75 (,3).000 (5,0) NYLON P.C.B. SUPPOTS "LMSP" SEIES ITEM NUMBE DESCIPTION "A" 7LMSP005 LMSP 5.5 (3,) 7LMSP0050 LMSP (,35) 7LMSP003 LMSP 3.3 (7,9) 7LMSP00375 LMSP (9,53) 7LMSP0037 LMSP (,) 7LMSP00500 LMSP (,70) 7LMSP005 LMSP 5.5 (5,) 7LMSP00750 LMSP (9,05) 7LMSP0075 LMSP (,3) 7LMSP0000 LMSP (5,0) SPING END ITS.5" HOLE LOCK O TENSION END ITS.5" HOLE PANEL THICKNESS / NYLON P.C.B. SUPPOTS "TMSP" SEIES ITEM NUMBE DESCIPTION "A" 7TMSP005 TMSP 5.5 (3,) 7TMSP0050 TMSP (,35) 7TMSP003 TMSP 3.3 (7,9) 7TMSP00375 TMSP (9,53) 7TMSP0037 TMSP (,) 7TMSP00500 TMSP (,70) 7TMSP005 TMSP 5.5 (5,) 7TMSP00750 TMSP (9,05) 7TMSP0075 TMSP (,3) 7TMSP0000 TMSP (5,0) 3 TELEPHONE: (70) 53- / 53- micro plastics, inc. AX: (70) 53-7

135 PEVIOUS PAGE O CON TEN TS IN DEX A-Z CICUIT BOAD HADWAE "LSP" SEIES - M SP END ITS A.5" HOLE LOCKING END ITS.7" HOLE PANEL THICKNESS.030 /.07 VIII "DLP" SEIES - BOTH ENDS IT A.7" HOLE PANEL THICKNESS.030 /.07 NYLON P.C.B. SUPPOTS "LSP" SEI ES ITEM NUMBE DESCIPTION "A" * 7LSP007 LSP (7,0) 7LSP0050 LSP (9,7) 7LSP00375 LSP (,57) 7LSP0037 LSP (,5) 7LSP00500 LSP (5,) 7LSP005 LSP 5.75 (,9) 7LSP00750 LSP (,0) 7LSP0075 LSP (5,7) 7LSP0000 LSP (,5) 7LSP05 LSP 5.5 (3,) 7LSP050 LSP (3,0) 7LSP0375 LSP (37,97) NYLON P.C.B. SUPPOTS "DLP" SEI ES ITEM NUMBE DESCIPTION "A" * 7DLP007 7DLP0050 7DLP DLP0037 7DLP DLP005 7DLP DLP0075 7DLP0000 7DLP05 7DLP050 7DLP0375 DLP 7 DLP 50 DLP 375 DLP 37 DLP 500 DLP 5 DLP 750 DLP 75 DLP 000 DLP 5 DLP 50 DLP (7,0).35 (9,7).95 (,57).557 (,5).5 (5,).75 (,9).70 (,0).995 (5,7).0 (,5).5 (3,).370 (3,0).95 (37,97) * EQUAL TO THE DISTANCE BETWEEN PANELS * EQUAL TO THE DISTANCE BETWEEN PANELS "DSP" SEIES - BOTH ENDS ITS A.5" HOLE "DM SP" SEIES - BOTH ENDS IT A.5" HOLE "DSP" SEIES ITEM NUMBE DESCIPTION "A" 7DSP005 DSP 5.5 (3,) 7DSP0050 DSP (,35) 7DSP000 DSP 0.0 (,0) 7DSP003 DSP 3.3 (7,9) 7DSP00375 DSP (9,53) 7DSP0037 DSP (,) 7DSP00500 DSP (,70) 7DSP005 DSP 5.5 (5,) 7DSP00750 DSP (9,05) 7DSP007 DSP 7.7 (0,0) 7DSP0075 DSP (,3) 7DSP0000 DSP (5,0) 7DSP050 DSP (3,75) PANEL THICKNESS / "DMSP" SEIES ITEM NUMBE DESCIPTION "A" 7DMSP005 DMSP 5.5 (3,) 7DMSP0050 DMSP (,35) 7DMSP003 DMSP 3.3 (7,9) 7DMSP00375 DMSP (9,53) 7DMSP0037 DMSP (,) 7DMSP00500 DMSP (,70) 7DMSP005 DMSP 5.5 (5,) 7DMSP00750 DMSP (9,05) 7DMSP0075 DMSP (,3) 7DMSP DMSP0000 DMSP 950 DMSP (,3).000 (5,0) mpsales@microplastics.com micro plastics, inc. WEBSITE: 35

136 PEVIOUS PAGE O CON TEN TS IN DEX A-Z CICUIT BOAD HADWAE VIII Simplify power transistor mountings and insulation, and improve thermal efficiency with molded insulators. These insulators are molded of Type Nylon for regular applications and of Glass Illed Polyester for heavy-duty uses. They replace up to six pieces of conventional insulation required with previous mountings. They also increase the amount of interface surface between device and sink by minimizing clearance holes required for all feed-thru connectors. They also have a built-in barrier which not only eliminates need for sleeving of base and emitter connections but also serves as an assembly aid during installation. STANDAD POWE TANSISTO MOUNTS PTI- for TO-3 ITEM NUMBE 9PTI PTIWOB DESCIPTION PTI- PTI- W/O BAIE STANDAD POWE TANSISTO MOUNTS PTI- for TO- ITEM NUMBE 9PTI PTIWOB DESCIPTION PTI- PTI- W/O BAIE HEAVY DUTY POWE TANSISTO MOUNTS PTI--H for TO-3 ITEM NUMBE 0PTIHD PTIHDWOB DESCIPTION PTI- HD PTI- HD W/O BAIE HEAVY DUTY POWE TANSISTO MOUNTS ITEM NUMBE 0PTIHD PTIHDWOB PTI--H for TO- DESCIPTION PTI- HD PTI- HD W/O BAIE 3 TELEPHONE: (70) 53- / 53- micro plastics, inc. AX: (70) 53-7

137 PEVIOUS PAGE O CON TEN TS IN DEX A-Z CICUIT BOAD HADWAE Micro Plastics' Power Transistor Covers are available in bothto-3 and TO- configurations. Both hole,5 hole and no hole styles are offered. Transistor covers are stocked in Nylon /. Other materials are available upon request. VIII POWE TANSISTO COVES TO-3 ITEM NUMBE DESCIPTION PTC003 PTC 03-N HOLE PTC0 PTC03-N 5 HOLE PTC0033 PTC 03-ON NO HOLE POWE TANSISTO COVES TO- ITEM NUMBE DESCIPTION PTC00 PTC0-N -HOLE PTC00 PTC0-N 5-HOLE PTC003 PTC0-ON NO HOLE EVESE LOCKING CICUIT BOAD SUPPOTS ITEM NUMBE DESCIPTION A B C D 7V0050 V (9,53) /3 (,7).50 (,35).00 (,5) 7V00375 V (9,53) /3 (,7).375 (9,53).00 (,5) EVESE LOCKING CICUIT BOAD SUPPOT STANDO ITEM NUMBE DESCIPTION HEAD DIA. BODY DIA. HEAD HEIGHT HOLE SIZE A 7VS00500 VS (9,53).50 (3,).05 (,).7 (,5).500 (,70) mpsales@microplastics.com micro plastics, inc. WEBSITE: 37

138 PEVIOUS PAGE O CON TEN TS IN DEX A-Z HOSE CLAMPS AND INSTALLATION TOOLS IX - APPLIANCE - Dishwashers, laundry, refrigerators, food preparation equipment. - ELECTICAL/ ELECTONIC - Positioning and placement of components and wiring. -.V./ BOATING - Plumbing and Accessories. - AUTOMOTIVE - Underhood applications, Heat-Stabilized material is available, call for details. Micro Plastics Premium Nylon Hose Clamps provide a superior seal on hose or tubing through their Patented interlocking design by eliminating the leak path created by the overlapping ring design hose clamps. As interlocking groves are ratcheted together the sealing diameter of the fastener is aligned in parallel, creating a uniform clamping surface. Clamps may be removed by separating the clamping halves in a perpendicular direction at the seal. Easy installation on most liquid, gas, or vacuum lines. Nylon clamps are tough, corrosion resistant and resilient. Parts are removable and reusable. PEMIUM NYLON HOSE CLAMPS PATENTED INTELOCKING DESIGN ELIMINATES LEAK PATH CLAM PING ANGE ITEM NUMBE DESCIPTION A B MIN. MAX HC050 HC03 " 5/" Hose Clamp Hose Clamp 7/3" 7/3" (5,5) (5,5) /" (,59) 3/" (,9)..300 (,5) (7,) (7,37) (,9) HC03 /3" Hose Clamp 7/3" (5,5) /" (,59).30 (9,).0 (0,3) HC00 HC0 HC053 HC0593 HC07 HC0750 HC075 3/3" 5/3" 7/3" 9/3" 3/" " 7/" Hose Clamp Hose Clamp Hose Clamp Hose Clamp Hose Clamp Hose Clamp Hose Clamp " 7/3" " " 7/3" 7/3" 7/3" (,35) (5,5) (,35) (,35) (5,5) (5,5) (5,5) /" (,59) /" (,59) /" (,59) /" (,59) /" (,59) /" (,59) /" (,59).0 (0,).75 (,07).53 (3,7).597 (5,).70 (7,0).730 (,5).70 (,0). (,9).53 (3,).0 (5,).5 (,9).70 (9,).30 (,0).975 (,77) HC0953 /" Hose Clamp " (,35) /" (,59).953 (,).093 (7,7) HC03 HC50 -/3" -" Hose Clamp Hose Clamp 5/" 5/" (7,9) (7,9) /" (,59) /" (,59).03 (,9).7 (30,5).50 (3,75).5 (3,0) HC0 HC593 HC7 HC75 HC5-3/3" -9/3" -/" -7/" -/" Hose Clamp Hose Clamp Hose Clamp Hose Clamp Hose Clamp /3" (,73) /3" (,73) /3" (,73)) 3/3" (0,3) 3/3" (0,3) /" (,59) /" (,59) /" (,59) /" (,59) /" (,59).0 (35,7).0 (0,9).593 (0,). (,0).790 (5,7).0 (53,59).70 (7,50).5 (53,9).0 (53,5).390 (0,7) STANDAD HOSE CLAM PS IN CLIP BASE CLAM PING ANGE ITEM NUMBE A B MIN. MAX HCC037 HCC0.30 (5,).50 (,35).070 (,7).070 (,7).30 (9,).395 (0,03).990 (5,5).35 (,3) 3 mpsales@microplastics.com micro plastics, inc. WEBSITE:

139 PEVIOUS PAGE O CON TEN TS IN DEX A-Z HOSE CLAMPS AND INSTALLATION TOOLS - APPLIANCE - Dishwashers, laundry, refrigerators, food preparation equipment. - ELECTICAL/ ELECTONIC - Positioning and placement of components and wiring. IX -.V./ BOATING - Plumbing and Accessories. - AUTOMOTIVE - Underhood applications, Heat-Stabilized material is available, call for details. Micro Plastics Standard Nylon Hose Clamps are based on the original design for this type of fastener. A overlapping tapered ring of nylon is fastened around the hose or tubing desired and secured to the required tightness by compressing interacting groves in a ratcheting fashion, creating a tight sealing application. Clamps may be removed by separating the clamping halves in perpendicular direction at the seal. STANDAD NYLON HOSE CLAM PS CLAM PING ANGE ITEM NUMBE DESCIPTION A B MIN. MAX HSC005.5 Hose Clamp.50 (3,).070 (,7).307 (7,0).3 (,9) HSC000 Hose Clamp.30 (.5,).070 (,7).30 (9,).395 (0,03) HSC000 Hose Clamp.30 (5,).070 (,7).0 (0,).5 (,) HSC000 Hose Clamp.30 (5,).070 (,7).9 (,70).5 (,9) HSC000 Hose Clamp.30 (5,).070 (5,).53 (3,03).5 (,) HSC000 0 Hose Clamp.30 (5,).070 (,7).59 (,5).50 (,5) HSC00 Hose Clamp.30 (5,).070 (,7). (5,5).707 (7,9) HSC00 Hose Clamp.30 (5,).070 (,7).70 (7,3).0 (0,35) HSC00 Hose Clamp.30 (5,).070 (,7).779 (9,79).99 (,3) HSC090 9 Hose Clamp.30 (5,).070 (,7).59 (,).99 (5,) HSC00 Hose Clamp.50 (,35).070 (,7).9 (3,57).07 (7,3) HSC00 Hose Clamp.50 (,35).070 (,7).990 (5,5).35 (,3) HSC00 Hose Clamp.0 (7,).070 (,7).3 (,5).9 (3,9) Nylon clamps are tough, corrosion resistant and resilient. Parts are removable and reusable. HOSE CLAM P INSTALLATION TOOLS Micro Plastics' Pneumatic -Ergonomic Hose Clamp Installation Tool has been carefully designed to help reduce the wrist fatigue associated with the rapid assembly of Nylon Hose Clamps. The easy trigger-type actuation of this air tool, in combination with the ergonomic angle of the hand grip, allows natural alignment of the wrist and hand during normal clamp installation. The tool operates on standard shop air from PSE. Lightweight, only ounces. Tools are configured prior to shipping. Please specify Hose Clamp sizes to be installed when ordering. NOT AVAILABLE O HOSE CLAMP SIZES LAGE THAN.953 PNEUMATIC HOSE CLAMP TOOL ITEM NUMBE PHCT000 PNEUMATIC EGONOMIC HOSE CLAMP TOOL ITEM NUMBE PHCET000 PATENT PENDING TELEPHONE (50) 53- / 53- micro plastics, inc. AX (50)

140 PEVIOUS PAGE O CON TEN TS IN DEX A-Z CABLE TIES AND MOUNTING HADWAE X Manufactured from tough, durable Nylon / material which is self extinguishing to U.L. 9V. The Nylon is inert to fungus or mold and is resistant to petrols, oil, grease and alkalis, etc. Ties can be tensioned by hand or by the use of applied tensioning tools. CABLE TIES or ties packaged,000 per bag, change the C at the end of the part number to an M. MINIATUE ANGE PAT NUMBE NATUAL NT005C NT005C NT05C NT005C M EETS WITH THE EQUIENT O MIL-S-390E BLACK NT005CB NT005CB NT05CB NT005CB LENGTH STANDAD M ETIC M M 0M M 00M M WIDTH STANDAD M ETIC M M.5M M.5M M.5M M MAX. DIAM ETE STANDAD M ETIC Ties are offered in Natural and Black Nylon. Ties are packaged 00 per bag. M M 0M M 3 50 M IN. STENGTH STANDAD M ETIC lb. lb. lb. lb.. kg. kg. kg. kg INTEM EDIATE ANGE PAT NUMBE NATUAL NT03C NT003C NT953C BLACK NT03CB NT003CB NT953CB LENGTH STANDAD M ETIC M M 00M M 95M M WIDTH STANDAD M ETIC... 3.M M 3.M M 3.M M MAX. DIAM ETE STANDAD M ETIC M M M IN. STENGTH STANDAD M ETIC 0 lb. 0 lb. 0 lb.. kg. kg. kg STANDAD ANGE PAT NUMBE NATUAL NT0C NT0C NT00C NT50C NT95C NT370C BLACK NT0CB NT0CB NT00CB NT50CB NT95CB NT370CB LENGTH STANDAD M ETIC M M 0M M 00M M 50M M 95M M 370M M WIDTH STANDAD M ETIC M M.M M.M M.M M.M M.M M MAX. DIAM ETE STANDAD M ETIC M M 75M M 00M M M IN. STENGTH STANDAD M ETIC 50 lb. 50 lb. 50 lb. 50 lb. 50 lb. 50 lb.. kg. kg. kg. kg. kg. kg LIGHT HEAVY ANGE PAT NUMBE NATUAL BLACK NT507C NT507CB NT007C NT907C NT3707C NT007CB NT907CB NT3707CB LENGTH STANDAD M ETIC M M M M 90M M 370M M WIDTH STANDAD M ETIC.99 7.M M M M 7.M M 7.M M MAX. DIAM ETE STANDAD M ETIC M M M IN. STENGTH STANDAD M ETIC 0 lb. 5.5 kg 0 lb. 0 lb. 0 lb. 5.5 kg 5.5 kg 5.5 kg 0 HIGHWAY 7 NOTH micro plastics, inc. LIPPIN, AKANSAS 73

141 PEVIOUS PAGE O CON TEN TS IN DEX A-Z CABLE TIES AND MOUNTING HADWAE CABLE TI E I NSTALLATION TOOLS X STANDAD M ETAL TENSIONING TOOLS ITEM NUMBE NTTOOLMHD O USE CABLE TIE WIDTHS OM.9 TO.5 STANDAD ADJUSTABLE NYLON TENSIONING TOOLS ITEM NUMBE NTT00LI STANDAD ADJUSTABLE M ETAL TENSIONING TOOLS ITEM NUMBE NTT00LMI O USE CABLE TIE WIDTHS OM.07 TO.9 O USE CABLE TIE WIDTHS OM.07 TO.9 IN CLIP PUSH MOUNTS in clip push mounts are available in sizes for 3/ and diameter holes. The special head configuration allows use with beaded ties, as well as conventional cable ties. parts are molded in black U.V. stabilized high density polyethylene, and are suitable for use in pre-drilled holes in wood, masonry, and a variety of other materials. ITEM NUMBE 3CPM75 DESCIPTION 3/ PUSH MOUNT TOLEANCE +/-.05 ITEM NUMBE DESCIPTION 3TA0000 3CPM5095 # SCEW TABPUSH MOUNT mpsales@microplastics.com micro plastics, inc. WEBSITE:

142 PEVIOUS PAGE O CON TEN TS IN DEX A-Z CABLE TIES AND MOUNTING HADWAE X CLIP MOUNTS applications where the back of the panel is inaccessible. Clip Mounts are designed to securely connect a tie to a predrilled hole. Clip Mounts can be used in ITEM NUMBE 3TA0000 3TA000 DESCIPTION.7 (,75) CLIP MOUNT.50 (,35) CLIP MOUNT ITEM NUMBE 3TA000 DESCIPTION.50 (,35) CLIP MOUNT SCEW TABS Screw Tabs are designed for use where space is limited. Tabs are fastened with a screw to provide a low profile assembly. ITEM NUMBE 3TA0000 DESCIPTION # SCEW TAB ITEM NUMBE 3TA0050 DESCIPTION " (,35) SCEW TAB CADLE MOUNTS Cradle Mounts are used in applications where a low profile is necessary. Each mount offers a four way entry and is secured with either a screw or adhesive backing. 3TA0000 is secured with a # - # or # screw, 3TA0095 uses # lat Head Screw. NOTE: the adhesive mounts have an acrylic foam backing that should be used on a smooth, clean, dry surface. ITEM NUMBE DESCIPTION 3TA0000 3TA000 " (5,0) CADLE MOUNT (AHESIVE) " (5,0) CADLE MOUNT (SCEW) ITEM NUMBE DESCIPTION 3TA0075 3TA0095 " (9,05) CADLE MOUNT (ADHESIVE) " (9,05) CADLE MOUNT (SCEW) TELEPHONE: (70) 53- / 53- micro plastics, inc. AX: (70) 53-7

143 PEVIOUS PAGE O CON TEN TS IN DEX A-Z ASTENE ASSOTNT KITS XI NON-MAGNETIC AND HAVE A HIGH STENGTH-TO- WEIGHT ATIO. PACKAGED IN LAGE EUSABLE TANS- PAENT PLASTIC STOAGE BOXES. IDEAL O: MOLDED NYLON ASTENES POVIDE ELECTICAL INSULATION, VIBATION AND COOSION ESISTANCE. HAVE A LOW THEMAL CONDUCTIVITY, AE POTOTYPE WOK - Large working assortments. PODUCT DESIGN - Latest designs for increased productivity. MODEL MAKING - Commercially available standard parts. SHOP AND MAINTENANCE - Convenient selection. # OASO75HC # OASOO75S # OASOOTCH STAIN ELIE BUSHINGS ASSOTM ENT CONSISTS O APPOXIMATELY: 0-3MP0M0-3MP03P0 0-3MP0K0 0-3MP0N0 0-3MP05P0-3MP0N0-3MP0P3-3MP0W0-3MP07W0-3MP0300-3MPL0-3MP5L0 Over 00 Transistor Covers Transistor and Capacitor Mounts in 7 Different Styles and Configurations TANSISTO HADWAE ASSOTM ENT CONSISTS O APPOXIMATELY: - 9PTI - 9PTI - 9PTIHD - 9PTIHD - 9PTIWOB - 9PTIWOB - 9PTIHDWOB - 9PTIHDWOB - PTC003 - PTC0 - PTC PTC00 - PTC00 - PTC CM CM CM000 PEMIUM HOSE CLAMPS ASSOTM ENT CONSISTS O APPOXIMATELY: 50 - HC HC HC HC0 0 - HC HC HC HC HC HC HC HC0 0 - HC HC7 5 - HC HC5 mpsales@microplastics.com micro plastics, inc. WEBSITE: 3

144 PEVIOUS PAGE O CON TEN TS IN DEX A-Z ASTENE ASSOTNT KITS XI MOLDED NYLON ASTENES POVIDE ELECTICAL INSULATION, VIBATION AND COOSION ESISTANCE. HAVE A LOW THEMAL CONDUCTIVITY, AE NON-MAGNETIC AND HAVE A HIGH STENGTH-TO- WEIGHT ATIO. PACKAGED IN LAGE EUSABLE TANS- PAENT PLASTIC STOAGE BOXES. # OASO9OOAS # OASO3OSWS IDEAL O: POTOTYPE WOK - Large working assortments. PODUCT DESIGN - Latest designs for increased productivity. MODEL MAKING - Commercially available standard parts. SHOP AND MAINTENANCE - Convenient selection. # OASO75OM SN Over 750 Nylon asteners Over 0 Different Sizes and Types SCEWS AND NUTS ASSOTM ENT CONSISTS O APPOXIMATELY: OUND, HEX, PAN, BINDE, AND ILLISTE HEADSTYLE M ACHINE SCEWS. IN THE OLLOWING SIZES; 00 - X " to " LONG ASSOTED HEADSTYLES 00-3 X " to " LONG ASSOTED HEADSTYLES 00 - X " to " LONG ASSOTED HEADSTYLES 00 - X " to /" LONG ASSOTED HEADSTYLES X " to "LONG OUND and ILLISTE HEAD 00 -,,,, & -0 SOCKET SET SCEWS 00 -,,,, & -0 HEX NUTS 5 - #, #, #, # 0, & LATWASHES Over 900 Nylon asteners Over 5 Different Sizes and Types. ASTENES 50 MOLDED NYLON SCEWS Assorted sizes and headstyles; ound, Pan, illister, lat, Binder, Hex and Set SOCKET SET SCEWS 50 - POLY DIVE IVETS 00 - LAT WASHES 00 - HEX NUTS 50 - LOCK NUTS 0 - CAP NUTS 0 - WING NUTS 50 - PUSH-IN ASTENES 50 - AOW CLIPS 00 - SCEW INSULATOS 0 - THUMB SCEWS # OASO3OPT Over 30 Assorted Nylon Drive ivets with Insertion Tool POLY DIVE IVETS ASSOTM ENT CONSISTS O APPOXIMATELY: 0 - P /. 0 - P / P / P / P / P / P / P / P / P /.3 - PT05 DIVE IVET INSETION TOOL All in Assorted Lengths and Shoulder Height Combinations. SHOULDE WASHES ASSOTM ENT CONSISTS O APPOXIMATELY: 50 - SHOULDE WASHES NAIL-IN CLIPS.093 to " ID.5 to.500 OD 30 - # SCEW INSULATOS 30 - # SCEW INSULATOS 5 - # SCEW INSULATOS 5 - # SCEW INSULATOS 5 - # 0 SCEW INSULATOS 5 - SCEW INSULATOS 0-5/ SCEW INSULATOS # OASO5NIC Over 500 Nail-In Clips In Different Sizes and Types. ASSOTM ENT CONSISTS O APPOXIMATELY: 55 - NCCO00 mm 75 COAX 55 - NCCO50.5 BELL 5 - NCCO500 5mm G NCCO700 7mm G- 5 - NCO00 59 TIAX 5 - NCCO900 9 DUAL G- TELEPHONE: (70) 53- / 53- micro plastics, inc. AX: (70) 53-7

145 PEVIOUS PAGE O CON TEN TS IN DEX A-Z ASTENE ASSOTNT KITS # OASOCA # OASO9OCC MOLDED NYLON ASTENES POVIDE ELECTICAL INSULATION, VIBATION AND COOSION ESISTANCE. HAVE A LOW THEMAL CONDUCTIVITY, AE IDEAL O: POTOTYPE WOK - Large working assortments. XI NON-MAGNETIC AND HAVE A HIGH STENGTH-TO- WEIGHT ATIO. PACKAGED IN LAGE EUSABLE TANS- PAENT PLASTIC STOAGE BOXES. PODUCT DESIGN - Latest designs for increased productivity. MODEL MAKING - Commercially available standard parts. SHOP AND MAINTENANCE - Convenient selection. Over 50 Cable Clips in Popular Sizes Including; Nail-in Clips, Heavy Duty Clips, Wire Clips and Spring Clips. CLIPS ASSOTM ENT CONSISTS O APPOXIMATELY: 5 - NCC NCC NCC000 - NCCO NCCO00 - WCO SPC HDCC0 - HDCC0 5 - HDCC HDCC NCC0500 # OASO3OSP CABLE CLAM PS Over 90 Cable Clamps in Popular Sizes. ASSOTM ENT CONSISTS O APPOXIMATELY: 0 - /" X /" CABLE CLAMPS 5-3/" X /" CABLE CLAMPS " X /" CABLE CLAMPS " X " CABLE CLAMPS 0-5/" X " CABLE CLAMPS " X " CABLE CLAMPS 7/" X " CABLE CLAMPS /" X " CABLE CLAMPS 5-5/" X /" CABLE CLAMPS " X /" CABLE CLAMPS 7/" X /" CABLE CLAMPS 0 - /" X /" CABLE CLAMPS 9/" X /" CABLE CLAMPS " X /" CABLE CLAMPS "X /" CABLE CLAMPS 5 - " X /" CABLE CLAMPS 3 - " X /" CABLE CLAMPS /" X /" CABLE CLAMPS # OASO3O5M CS # OASOO7ABC Over 00 Adhesive Backed Cable Clips in 0 Sizes including Single, Double and eleasable Styles. ADHESIVE BACKED CLIPS ASSOTM ENT CONSISTS O APPOXIMATELY: 0 - AWCOO AWC DPC DPC DPC30 - SPC DPC SPC SPC SPC5550 SPACES/STANDOS ASSOTM ENT CONSISTS O APPOXIMATELY: 00 - OUND SPACES - PLAIN 3/", ", ", /" DIATES, /" to " Long. 0 - HEX SPACES - PLAIN " to " Long OUND SPACES - TAPPED,,,, -0, ", 5/", ", /" Diameter, " to " Long HEX SPACES - TAPPED,,, Diameter, " to " Long. 5 - HEX MALE/EMALE STANDOS - THEADED,, Diameter, " to " Long. Over 300 NYLON TAL COE SCEWS Over 30 Different Sizes and Headstyles. M ETAL COE SCEWS ASSOTM ENT CONSISTS O APPOXIMATELY: ALL IN ASSOTED OUND, OUND WASHE, LAT AND ILLISTE HEADSYTLES X " to " TAL COE SCEWS 75 - X " to " TAL COE SCEWS 0 - X " to " TAL COE SCEWS X " to /" TAL COE SCEWS mpsales@microplastics.com micro plastics, inc. WEBSITE: 5

146 PEVIOUS PAGE O CON TEN TS IN DEX A-Z ASTENE ASSOTNT KITS XI IDEAL O: MOLDED NYLON ASTENES POVIDE ELECTICAL INSULATION, VIBATION AND COOSION ESISTANCE. HAVE A LOW THEMAL CONDUCTIVITY, AE NON-MAGNETIC AND HAVE A HIGH STENGTH-TO- WEIGHT ATIO. PACKAGED IN LAGE EUSABLE TANS- PAENT PLASTIC STOAGE BOXES. POTOTYPE WOK - Large working assortments. PODUCT DESIGN - Latest designs for increased productivity. MODEL MAKING - Commercially available standard parts. SHOP AND MAINTENANCE - Convenient selection. # OASOOCC # OASO3DHP # OASOOCBS CICUIT BOAD SUPPOTS ASSOTM ENT CONSISTS O APPOXIMATELY: 5-7LTP LLP LTP50 5-7LLP50 5-7LTP LLP LTP LLP LTP LLP LTP LLP LTP LLP LTP07 5-7LLP07 0-7LTP LLP LTP LLP LTP05 0-7LLP05 Over 0 Cable Clips In 5 Different Styles & Sizes CABLE CLIPS ASSOTM ENT CONSISTS O APPOXIMATELY: - DPC DPC DPC30 - DPC SPC SPC SPC30 - SPC HDCC50 - HDCC750 - HDCC30 - HDCC970 - HDCC HDCC0 - HDCC0 # OASO7OOECA Over 700 Connectors 3 Different Body and Pin assemblies PC. EDGE CONNECTOS ASSOTM ENT CONSISTS O APPOXIMATELY: 00-7TP0003A 00-7TP0003B 00-7TP000A 00-7TP000B 75-7TP000A 75-7TP000B 75-7TP000A 75-7TP000B DELUXE HOLE PLUGS ASSOTM ENT CONSISTS O APPOXIMATELY: - MP000 - MP750 - MP500 - MP375 - MP50 - MP7 3 - MP MP MP MP MP MP MP0 0 - MP MP MP000V - MP075V - VP00BM - PP00BG - PP07BG - PP07BM - PP0BG - PP0BM 5 - PP075BG 5 - PP075BM 5 - PP0BG PP0BM PP050BM 0 - PPO50BG 0 - PP03BM7 0 - PP03BG7 0 - PP037BG3 0 - PP037BM3 0 - PP05BG0 0 - PP05BM0 5 - PP0BG 5 - PP0BM TELEPHONE: (70) 53- / 53- micro plastics, inc. AX: (70) 53-7

147 PEVIOUS PAGE O CON TEN TS IN DEX A-Z ASTENE ASSOTNT KITS # OASO75M SP # OASO0WA MOLDED NYLON ASTENES POVIDE ELECTICAL INSULATION, VIBATION AND COOSION ESISTANCE. HAVE A LOW THEMAL CONDUCTIVITY, AE IDEAL O: POTOTYPE WOK - Large working assortments. XI NON-MAGNETIC AND HAVE A HIGH STENGTH-TO- WEIGHT ATIO. PACKAGED IN LAGE EUSABLE TANS- PAENT PLASTIC STOAGE BOXES. PODUCT DESIGN - Latest designs for increased productivity. MODEL MAKING - Commercially available standard parts. SHOP AND MAINTENANCE - Convenient selection. P.C.B. POSTS ASSOTM ENT CONSISTS O APPOXIMATELY: 00-7MSP MSP MSP MSP MSP MSP MSP MSP MSP MSP0000 # OASOO3CG Over 5 Nylon Screw Anchors in Different Styles and Sizes. WALL ANCHO / IVETS ASSOTM ENT CONSISTS O APPOXIMATELY: 0 - # / # SCEW ANCH0S - # 0 / # SCEW ANCHOS 0 - # / # SCEW ANCHOS - 3/" X " PIECE IVET, STEEL - " X " TWO PIECE IVET, STEEL - " X " TWO PIECE IVET, NYLON - " X /" TWO PIECE IVET, NYLON - " X " TWO PIECE IVET, NYLON # OASO5OW # OASO9OTLT Over 0 Assorted Nylon Twist Lock Ties in Popular Sizes. "EZ" TWIST LOCKS ASSOTM ENT CONSISTS O APPOXIMATELY: 50 - " TWIST LOCK TIES 30 - " TWIST LOCK TIES 30 - /" TWIST LOCK TIES 0 - " TWIST LOCK TIES 30 - " TWIST LOCK TIES 30-5/" TWIST LOCK TIES P.C.B. CAD GUIDES ASSOTM ENT CONSISTS O APPOXIMATELY: - CG0000 CAD GUIDES - CG00550 CAD GUIDES - CG0050 CAD GUIDES - CG0000 CAD GUIDES - CG00350 CAD GUIDES - CG00300 CAD GUIDES - CG0050 CAD GUIDES All in Assorted Outside Diameters and Thickness anges. LAT WASHES ASSOTM ENT CONSISTS O APPOXIMATELY: 50 - # LATWASHES 0 - # LATWASHES 0 - # LATWASHES 0 - # LATWASHES 0 - # 0 LATWASHES 0 - " LATWASHES 0 - " LATWASHES 0 - /" LATWASHES 00-9/" to " LATWASHES # OASOOAB ALL-IT BUSHINGS ASSOTM ENT CONSISTS O APPOXIMATELY: 5 - A A A A0 5 - AO A05 Over 00 Nylon All-it Bushings in Popular Sizes mpsales@microplastics.com micro plastics, inc. WEBSITE: 7

148 PEVIOUS PAGE O CON TEN TS IN DEX A-Z ASTENE ASSOTNT KITS XI IDEAL O: MOLDED NYLON ASTENES POVIDE ELECTICAL INSULATION, VIBATION AND COOSION ESISTANCE. HAVE A LOW THEMAL CONDUCTIVITY, AE NON-MAGNETIC AND HAVE A HIGH STENGTH-TO- WEIGHT ATIO. PACKAGED IN LAGE EUSABLE TANS- PAENT PLASTIC STOAGE BOXES. POTOTYPE WOK - Large working assortments. PODUCT DESIGN - Latest designs for increased productivity. MODEL MAKING - Commercially available standard parts. SHOP AND MAINTENANCE - Convenient selection. # OASO5OSB # OASO3ONHP # OASO3LCA Over 00 Lamp Accessories LAM P ACCESSOIES ASSOTM ENT CONSISTS O APPOXIMATELY: 0-3 /" THEADED TUBING 5 - /" LAMP SNAP BUSHING - / NPS LAMPCOD BUSHING - NPS LAMPCOD BUSHING - NPS LAMPCOD BUSHING 3 - / NPS LAMPCOD BUSHING 3 - / NPS PC. THEADED BUSHING 0-3MP0K0 0-3MP0L0 0-3MPON0 0 - MP MP000 INSULATING BUSHINGS ASSOTM ENT CONSISTS O APPOXIMATELY: - MP000 - MP005 - MP MP MP000 - MP000 - MP MP MP057 - MP05 - MP MP00 HOLE PLUGS ASSOTM ENT CONSISTS O THE OLLOWING HOLE PLUGS IN SMOOTH AND MATTE INISH. APPOXIMATE COUNTS. 0-3/" HOLE PLUGS 0 - " HOLE PLUGS 0-5/" HOLE PLUGS 0 - " HOLE PLUGS 0-7/" HOLE PLUGS 0 - /" HOLE PLUGS 0-9/" HOLE PLUGS 0 - " HOLE PLUGS 0 - /" HOLE PLUGS 0 - " HOLE PLUGS 0-3/" HOLE PLUGS 0-7/" HOLE PLUGS 0 - " HOLE PLUGS Over 30 Plugs in 3 Different Sizes and Types # OASOOWT WIE/CABLE TIES ASSOTM ENT CONSISTS O APPOXIMATELY: - WIE TIES " to " Natural & Black 0 - BEADED TIES " Long - ASSOTED CLIPS, TABS AND MOUNTS TELEPHONE: (70) 53- / 53- micro plastics, inc. AX: (70) 53-7

149 TIC SCEWS, BOLTS, AND THEADED OD All tolerances are plus and minus. ITEM NUMBE DESCIPTION ITEM NUMBE DESCIPTION M0000D00 M X. X 50M0000D005 M X. X 5 50M0000D00 M X. X 50M0000D00 M X. X 50M0000D00 M X. X 0 50M0000D0 M X. X 50M0000D0 M X. X 50M0000D00 M X. X 0 50M0000D05 M 50M0505D00 M.5 X.5 X 50M0505D005 M.5 X.5 X 50M0505D00 M.5 X.5 X 50M0505D00 M.5 X.5 X X. X M0505D00 M.5 X.5 X 0 50M0505D0 M.5 X.5 X 50M0505D0 M.5 X.5 X 50M0505D00 M.5 X.5 X 0 50M0505D05 M.5 X.5 X 5 50M030050D00 M3 X.5 X 50M030050D005 M3 X.5 X 5 50M030050D00 M3 X.5 X 50M030050D00 M3 X.5 X 50M030050D00 M3 X.5 X 0 50M030050D0 M3 X.5 X 50M030050D0 M3 X.5 X 50M030050D00 M3 X.5 X 0 50M030050D05 M3 X.5 X 5 50M030050D030 M3 X.5 X 30 50M030050D035 M3 X.5 X 35 50M030050D0 M3 X.5 X 50M03500D005 M3.5 X. X 5 50M03500D00 M3.5 X. X 50M03500D00 M3.5 X. X 50M03500D00 M3.5 X. X 0 50M03500D0 M3.5 X. X 50M03500D0 M3.5 X. X 50M03500D00 M3.5 X. X 0 50M03500D05 M3.5 X. X 5 50M03500D05 M3.5 X. X 35 50M03500D0 M3.5 X. X 50M00070D00 M X.7 X 50M00070D00 M X.7 X 50M00070D00 M X.7 X 0 50M00070D0 M X.7 X 50M00070D0 M X.7 X Q TABLE PEVIOUS PAGE ALL DINSIONS AE IN MILLITES Nominal Screw Length to 3 mm incl. over 3 to 0 mm over 0 to mm over to 50 mm over 50 mm O CON TEN TS Tolerance On Length mm THEAD SIZE A H J T M X 0. M.5 X 0.5 M3 X 0.5 M3.5 X 0. M X 0.7 M5 X.0 M X.0 M X.5 M0 X.5 50M00070D00 M X.7 X 0 50M00070D05 M X.7 X 5 50M00070D030 M X.7 X 30 50M00070D035 M X.7 X 35 50M00070D00 M X.7 X 0M M 50M05000D00 M5 X. X 50M05000D00 M5 X. X 50M05000D00 M5 X. X 0 50M05000D0 M5 X. X 50M05000D0 M5 X. X 50M05000D00 M5 X. X 0 50M05000D05 M5 X. X 5 50M05000D030 M5 X. X 30 50M05000D035 M5 X. X 35 50M05000D00 M5 X. X 0 50M0000D005 M X.00 X 5 50M0000D00 M X.00 X 50M0000D00 M X.00 X 0 50M0000D0 M X.00 X 50M0000D0 M X.00 X 50M0000D00 M X.00 X 0 50M0000D05 M X.00 X 5 50M0000D030 M X.00 X 30 50M0000D035 M X.00 X 35 50M0000D00 M X.00 X 0 50M0000D05 M X.00 X 5 50M0000D050 M X.00 X 50 50M0000D00 M X.00 X 0 50M0000D05 M X.00 X 5 50M0000D070 M X.00 X 70 50M0000D075 M X.00 X 75 50M005D00 M X.5 X 0 50M005D0 M X.5 X 50M005D00 M X.5 X 0 50M005D05 M X.5 X 5 50M005D030 M X.5 X 30 50M005D035 M X.5 X 35 50M005D050 M X.5 X 50 50M005D070 M X.5 X 70 50M0050D0 50M0050D00 50M0050D05 50M0050D030 50M0050D035 50M0050D050 50M0050D00 M0 X.50 X M0 X.50 X 0 M0 X.50 X 5 M0 X.50 X 30 M0 X.50 X 35 M0 X.50 X 50 M0 X.50 X 0 IN DEX A-Z CHEESE SLOTTED XII mp@microplastics.com micro plastics, inc. WEBSITE: 9

150 PEVIOUS PAGE O CON TEN TS IN DEX A-Z TIC SCEWS, BOLTS, AND THEADED OD XII THEAD SIZE A H W M M.5 M3 M3.5 M M5 M M M0 M min.. min. 5.0 min. 5.9 min min..7 min min.. min. 7. min. 9. min. HEX CODE "J" HEX SLOTTED CODE "K" THEAD SIZE A W H J T M M.5 M3 M3.5 M M5 M M M min.. min. 5.0 min. 5.9 min min..7 min min.. min. 7. min Nominal Screw Length to 3 mm incl. over 3 to 0 mm over 0 to mm over to 50 mm over 50 mm HEX CODE "J" Tolerance On Length mm All tolerances are plus and minus. HEX SLOTTED CODE "K" ITEM NUMBE DESCIPTION ITEM NUMBE DESCIPTION M M X. X 50M M X.7 X 5 50M M X. X 5 50M M X.7 X 30 50M M X. X 50M M X.7 X 35 50M M X. X 50M M X.7 X 0 50M M X. X 0 50M M5 X. X 50M M X. X 50M M5 X. X 50M M X. X 50M M5 X. X 0 50M M X. X 0 50M M5 X. X 50M M X. X 5 50M M5 X. X 50M M.5 X.5 X 50M M5 X. X 0 50M M.5 X.5 X 5 50M M5 X. X 5 50M M.5 X.5 X 50M M5 X. X 30 50M M.5 X.5 X 50M M5 X. X 35 50M M.5 X.5 X 0 50M M5 X. X 0 50M M.5 X.5 X * 50M M5 X. X 70 50M M.5 X.5 X 50M0000 O05 M X.00 X 5 50M M.5 X.5 X 0 50M M X.00 X 50M M.5 X.5 X 5 50M M X.00 X 0 50M M3 X.5 X 50M M X.00 X 50M M3 X.5 X 5 50M M X.00 X 50M M3 X.5 X 50M M X.00 X 0 50M M3 X.5 X 50M M X.00 X 5 50M M3 X.5 X 0 50M M X.00 X 30 50M M3 X.5 X 50M M X.00 X 35 50M M3 X.5 X 50M M X.00 X 0 50M M3 X.5 X 0 50M M X.00 X 5 50M M3 X.5 X 5 50M M X.00 X 50 50M M3 X.5 X 30 50M M X.00 X 0 50M M3 X.5 X 35 50M M X.00 X 70 50M M3 X.5 X 50M M X.00 X 75 50M M3.5 X. X 5 50M M X.5 X 0 50M M3.5 X. X 50M005 0 M X.5 X 50M M3.5 X. X 7 50M M X.5 X 0 50M M3.5 X. X 50M M X.5 X 5 50M M3.5 X. X 0 50M M X.5 X 30 50M M3.5 X. X 50M M X.5 X 35 50M M3.5 X. X 50M M X.5 X 0 50M M3.5 X. X 0 50M M X.5 X 50 50M M3.5 X. X 5 50M M X.5 X 70 50M M3.5 X. X 35 50M M0 X.50 X 50M M3.5 X. X 50M M0 X.50 X 0 50M M X.7 X 50M M0 X.50 X 5 50M M X.7 X 50M M0 X.50 X 30 50M M X.7 X 0 50M M0 X.50 X 35 50M M X.7 X 50M M0 X.50 X 50 50M M X.7 X 50M M0 X.50 X 0 50M M X.7 X 0 50M M0 X.50 X 70 * 50M075J00 M X.75 X 0 * NOT AVAILABLE IN SLOT HEX HEAD. 50 TELEPHONE: (70) 53- / 53- micro plastics, inc. AX: (70) 53-7

151 PEVIOUS PAGE TIC SCEWS, BOLTS, AND THEADED OD ALL DINSIONS AE IN MILLITES O CON TEN TS IN DEX A-Z XII THEAD SIZE B A C T M3 X.5 M3.5 X. M X.7 M5 X. M X Nominal Screw Length to 3 mm incl. over 3 to 0 mm over 0 to mm over to 50 mm over 50 mm Tolerance On Length mm All tolerances are plus and minus. ITEM NUMBE DESCIPTION ITEM NUMBE DESCIPTION M030050T00 M3 X.5 X Thumb Screw 50M00070T00 M X.7 X 0 Thumb Screw 50M030050T005 M3 X.5 X 5 Thumb Screw 50M00070T05 M X.7 X 5 Thumb Screw 50M030050T00 M3 X.5 X Thumb Screw 50M00070T030 M X.7 X 30 Thumb Screw 50M030050T00 M3 X.5 X Thumb Screw 50M00070T035 M X.7 X 35 Thumb Screw 50M030050T00 M3 X.5 X 0 Thumb Screw 50M00070T00 M X.7 X 0 Thumb Screw 50M030050T0 M3 X.5 X Thumb Screw 50M05000T00 M5 X. X Thumb Screw 50M030050T0 M3 X.5 X Thumb Screw 50M05000T00 M5 X. X Thumb Screw 50M030050T00 M3 X.5 X 0 Thumb Screw 50M05000T00 M5 X. X 0 Thumb Screw 50M030050T05 M3 X.5 X 5 Thumb Screw 50M05000T0 M5 X. X Thumb Screw 50M030050T030 M3 X.5 X 30 Thumb Screw 50M05000T0 M5 X. X Thumb Screw 50M030050T035 M3 X.5 X 35 Thumb Screw 50M05000T00 M5 X. X 0 Thumb Screw 50M030050T0 M3 X.5 X Thumb Screw 50M05000T05 M5 X. X 5 Thumb Screw 50M03500T005 M3.5 X. X 5 Thumb Screw 50M05000T030 M5 X. X 30 Thumb Screw 50M03500T00 M3.5 X. X Thumb Screw 50M05000T00 M5 X. X 0 Thumb Screw 50M03500T00 M3.5 X. X Thumb Screw 50M0000T005 M X.00 X 5 Thumb Screw 50M03500T00 M3.5 X. X 0 Thumb Screw 50M0000T00 M X.00 X Thumb Screw 50M03500T0 M3.5 X. X Thumb Screw 50M0000T00 M X.00 X 0 Thumb Screw 50M03500T0 M3.5 X. X Thumb Screw 50M0000T0 M X.00 X Thumb Screw 50M03500T00 M3.5 X. X 0 Thumb Screw 50M0000T0 M X.00 X Thumb Screw 50M03500T05 M3.5 X. X 5 Thumb Screw 50M0000T00 M X.00 X 0 Thumb Screw 50M03500T035 M3.5 X. X 35 Thumb Screw 50M0000T0 M X.00 X Thumb Screw 50M03500T0 M3.5 X. X 50M00070T003 M X.7 X 3 50M00070T00 M X.7 X 50M00070T00 M X.7 X 50M00070T00 M X.7 X 0 50M00070T0 M X.7 X 50M00070T0 M X.7 X Thumb Screw 50M0000T05 M X.00 X 5 Thumb Screw Thumb Screw 50M0000T035 M X.00 X 35 Thumb Screw Thumb Screw 50M0000T00 M X.00 X 0 Thumb Screw Thumb Screw 50M0000T05 M X.00 X 5 Thumb Screw Thumb Screw 50M0000T050 M X.00 X 50 Thumb Screw Thumb Screw 50M0000T00 M X.00 X 0 Thumb Screw Thumb Screw 50M0000T070 M X.00 X 70 Thumb Screw 50M0000T075 M X.00 X 75 Thumb Screw ECONOMY GADE THUMB SCEW mp@microplastics.com micro plastics, inc. WEBSITE: 5

152 XII Q TABLE PEVIOUS PAGE O CON TEN TS IN DEX A-Z TIC SCEWS, BOLTS, AND THEADED OD ALL DINSIONS AE IN MILLITES THEAD SIZE A H O M X 0. M.5 X 0.5 M3 X 0.5 M3.5 X 0. M X 0.7 M5 X 0. M X M X.5 M0 X max ref..5 max ref..7 max ref..3 max ref..7 max ref..7 max ref. 3.3 max ref.. max ref. 5.0 max ref..7 max. max. max 3. max 3.7 max 3.9 max.7 max. max 7.3 max ITEM NUMBE DESCIPTION ITEM NUMBE DESCIPTION M0505M00 M.5 X.5 X Oval Phil 50M00070M0 M X.7 X OVAL PHILLIPS 50M0505M005 M.5 X.5 X 5 Oval Phil 50M0505M00 M.5 X.5 X Oval Phil 50M0505M00 M.5 X.5 X Oval Phil 50M0505M00 M.5 X.5 X 0 Oval Phil 50M0505M0 M.5 X.5 X Oval Phil 50M0505M0 M.5 X.5 X Oval Phil 50M0505M00 M.5 X.5 X 0 Oval Phil 50M0505M05 M.5 X.5 X 5 Oval Phil 50M030050M005 M3 X.5 X 5 Oval Phil 50M030050M00 M3 X.5 X Oval Phil 50M030050M00 M3 X.5 X Oval Phil 50M030050M00 M3 X.5 X 0 Oval Phil 50M030050M0 M3 X.5 X Oval Phil 50M030050M0 M3 X.5 X Oval Phil 50M030050M00 M3 X.5 X 0 Oval Phil 50M030050M05 M3 X.5 X 5 Oval Phil 50M03500M005 M3. X. X 5 Oval Phil 50M03500M00 M3.5 X. X Oval Phil 50M03500M00 M3.5 X. X Oval Phil 50M03500M00 M3.5 X. X 0 Oval Phil 50M03500M0 M3.5 X. X Oval Phil 50M03500M0 M3.5 X. X Oval Phil 50M03500M00 M3.5 X. X 0 Oval Phil 50M03500M05 M3.5 X. X 5 Oval Phil 50M03500M035 M3.5 X. X 35 Oval Phil 50M00070M00 M X.7 X Oval Phil 50M00070M00 M X.7 X Oval Phil 50M00070M00 M X.7 X 0 Oval Phil 50M00070M0 M X.7 X Oval Phil 50M00070M00 M X.7 X 0 50M00070M05 M X.7 X 5 50M05000M00 M5 X. X 50M05000M00 M5 X. X 50M05000M00 M5 X. X 0 50M05000M0 M5 X. X 50M05000M0 M5 X. X 50M05000M00 M5 X. X 0 50M05000M05 M5 X. X 5 50M05000M030 M5 X. X 30 50M05000M00 M5 X. X 0 50M0000M00 M X.00 X 50M0000M00 M X.00 X 0 50M0000M0 M X.00 X 50M0000M0 M X.00 X 50M0000M00 M X.00 X 0 50M0000M05 M X.00 X 5 50M0000M035 M X.00 X 35 50M0000M05 M X.00 X 5 50M005M00 M X.5 X 0 50M005M0 M X.5 X 50M005M00 M X.5 X 0 50M005M05 M X.5 X 5 50M005M030 M X.5 X 30 50M005M050 M X.5 X 50 50M0050M00 M0 X.5 X 0 50M0050M05 M0 X.5 X 5 50M0050M035 M0 X.5 X 35 Oval Phil Oval Phil Oval Phil Oval Phil Oval Phil Oval Phil Oval Phil Oval Phil Oval Phil Oval Phil Oval Phil Oval Phil Oval Phil Oval Phil Oval Phil Oval Phil Oval Phil Oval Phil Oval Phil Oval Phil Oval Phil Oval Phil Oval Phil Oval Phil Oval Phil Oval Phil Oval Phil Oval Phil Oval Phil 5 TELEPHONE: (70) 53- / 53- micro plastics, inc. AX: (70) 53-7

153 PEVIOUS PAGE TIC SCEWS, BOLTS, AND THEADED OD ALL DINSIONS AE IN MILLITES O CON TEN TS IN DEX A-Z XII THEAD SIZE A H O J T M X 0. M.5 X 0.5 M3 X 0.5 M3.5 X 0. M X 0.7 M5 X 0. M X M X.5 M0 X max ref..5 max ref..7 max ref..3 max ref..7 max ref..7 max ref. 3.3 max ref.. max ref. 5.0 max ref..7 max. max. max 3. max 3.7 max 3.9 max.7 max. max 7.3 max ITEM NUMBE DESCIPTION ITEM NUMBE DESCIPTION M0000L00 M X. X Oval Slot 50M00070L0 M X.7 X Oval Slot 50M0000L005 M X. X 5 Oval Slot 50M00070L05 M X.7 X 5 Oval Slot 50M0000L00 M X. X Oval Slot 50M00070L0 M X.7 X Oval Slot 50M0000L00 M X. X Oval Slot 50M00070L00 M X.7 X 0 Oval Slot 50M0000L00 M X. X 0 Oval Slot 50M00070L05 M X.7 X 5 Oval Slot 50M0000L0 M X. X Oval Slot 50M00070L030 M X.7 X 30 Oval Slot 50M0000L0 M X. X Oval Slot 50M00070L035 M X.7 X 35 Oval Slot 50M0000L0 M X. X Oval Slot 50M05000L00 M5 X. X Oval Slot 50M0000L05 M X. X 5 Oval Slot 50M05000L00 M5 X. X Oval Slot 50M0505L00 M.5 X.5 X Oval Slot 50M05000L00 M5 X. X 0 Oval Slot 50M0505L005 M.5 X.5 X 5 Oval Slot 50M05000L0 M5 X. X Oval Slot 50M0505L00 M.5 X.5 X Oval Slot 50M05000L05 M5 X. X 5 Oval Slot 50M0505L00 M.5 X.5 X Oval Slot 50M05000L0 M5 X. X Oval Slot 50M0505L00 M.5 X.5 X 0 Oval Slot 50M05000L00 M5 X. X 0 Oval Slot 50M0505L0 M.5 X.5 X Oval Slot 50M05000L05 M5 X. X 5 Oval Slot 50M0505L0 M.5 X.5 X Oval Slot 50M05000L030 M5 X. X 30 Oval Slot 50M0505L00 M.5 X.5 X 0 Oval Slot 50M05000L035 M5 X. X 35 Oval Slot 50M0505L05 M.5 X.5 X 5 Oval Slot 50M05000L00 M5 X. X 0 Oval Slot 50M030050L005 M3 X.5 X 5 Oval Slot 50M0000L00 M X.00 X Oval Slot 50M030050L00 M3 X.5 X Oval Slot 50M0000L00 M X.00 X 0 Oval Slot 50M030050L00 M3 X.5 X Oval Slot 50M0000L0 M X.00 X Oval Slot 50M030050L00 M3 X.5 X 0 Oval Slot 50M0000L0 M X.00 X Oval Slot 50M030050L0 M3 X.5 X Oval Slot 50M0000L00 M X.00 X 0 Oval Slot 50M030050L05 M3 X.5 X 5 Oval Slot 50M0000L05 M X.00 X 5 Oval Slot 50M030050L0 M3 X.5 X Oval Slot 50M0000L035 M X.00 X 35 Oval Slot 50M030050L00 M3 X.5 X 0 Oval Slot 50M0000L00 M X.00 X 0 Oval Slot 50M030050L05 M3 X.5 X 5 Oval Slot 50M0000L05 M X.00 X 5 Oval Slot 50M030050L030 M3 X.5 X 30 Oval Slot 50M0000L050 M X.00 X 50 Oval Slot 50M030050L0 M3 X.5 X Oval Slot 50M005L0 M X.5 X Oval Slot 50M03500L005 M3.5 X. X 5 Oval Slot 50M005L00 M X.5 X 0 Oval Slot 50M03500L00 M3.5 X. X Oval Slot 50M005L05 M X.5 X 5 Oval Slot 50M03500L00 M3.5 X. X Oval Slot 50M005L030 M X.5 X 30 Oval Slot 50M03500L00 M3.5 X. X 0 Oval Slot 50M005L050 M X.5 X 50 Oval Slot 50M03500L0 M3.5 X. X Oval Slot 50M0050L00 M0 X.50 X 0 Oval Slot 50M03500L00 M3.5 X. X 0 Oval Slot 50M0050L05 M0 X.50 X 5 Oval Slot 50M03500L05 M3.5 X. X 5 Oval Slot 50M0050L030 M0 X.50 X 30 Oval Slot 50M03500L035 M3.5 X. X 35 50M00070L00 M X.7 X 50M00070L00 M X.7 X 50M00070L00 M X.7 X 0 Oval Slot 50M0050L035 M0 X.50 X 35 Oval Slot Oval Slot 50M0050L00 M0 X.50 X 0 Oval Slot Oval Slot OVAL SLOTTED mp@microplastics.com micro plastics, inc. WEBSITE: 53

154 XII Q TABLE PEVIOUS PAGE O CON TEN TS IN DEX A-Z TIC SCEWS, BOLTS, AND THEADED OD ALL DINSIONS AE IN MILLITES PAN PHILLIPS THEAD SIZE A H M M.5 M3 M3.5 M M5 M M M Nominal Screw Length to 3 mm incl. over 3 to 0 mm over 0 to mm over to 50 mm over 50 mm Tolerance On Length mm All tolerances are plus and minus. ITEM NUMBE DESCIPTION M0000P00 M X. X Pan Phil 50M0000P005 M X. X 5 Pan Phil 50M0000P00 M X. X Pan Phil 50M0000P00 M X. X Pan Phil 50M0000P00 M X. X 0 Pan Phil 50M0000P0 M X. X Pan Phil 50M0000P0 M X. X Pan Phil 50M0000P00 M X. X 0 Pan Phil 50M0000P05 M X. X 5 Pan Phil 50M0505P00 M.5 X.5 X Pan Phil 50M0505P005 M.5 X.5 X 5 Pan Phil 50M0505P00 M.5 X.5 X Pan Phil 50M0505P00 M.5 X.5 X Pan Phil 50M0505P00 M.5 X.5 X 0 Pan Phil 50M0505P0 M.5 X.5 X Pan Phil 50M0505P0 M.5 X.5 X Pan Phil 50M0505P00 M.5 X.5 X 0 Pan Phil 50M0505P05 M.5 X.5 X 5 Pan Phil 50M030050P00 M3 X.5 X Pan Phil 50M030050P005 M3 X.5 X 5 Pan Phil 50M030050P00 M3 X.5 X Pan Phil 50M030050P00 M3 X.5 X Pan Phil 50M030050P00 M3 X.5 X 0 Pan Phil 50M030050P0 M3 X.5 X Pan Phil 50M030050P0 M3 X.5 X Pan Phil 50M030050P00 M3 X.5 X 0 Pan Phil 50M030050P05 M3 X.5 X 5 Pan Phil 50M030050P030 M3 X.5 X 30 Pan Phil 50M030050P035 M3 X.5 X 35 Pan Phil 50M030050P0 M3 X.5 X Pan Phil 50M03500P005 M3.5 X. X 5 Pan Phil 50M03500P00 M3.5 X. X Pan Phil 50M03500P007 M3.5 X. X 7 Pan Phil 50M03500P00 M3.5 X. X Pan Phil 50M03500P00 M3.5 X. X 0 Pan Phil 50M03500P0 M3.5 X. X Pan Phil 50M03500P0 M3.5 X. X Pan Phil 50M03500P00 M3.5 X. X 0 Pan Phil 50M03500P05 M3.5 X. X 5 Pan Phil 50M03500P035 M3.5 X. X 35 Pan Phil 50M03500P0 M3.5 X. X Pan Phil 50M00070P003 M X.7 X 3 Pan Phil 50M00070P00 M X.7 X Pan Phil 50M00070P00 M X.7 X Pan Phil 50M00070P00 M X.7 X 0 Pan Phil 50M00070P0 M X.7 X Pan Phil 50M00070P0 M X.7 X Pan Phil 50M00070P00 M X.7 X 0 Pan Phil ITEM NUMBE DESCIPTION M00070P05 M X.7 X 5 Pan Phil 50M00070P030 M X.7 X 30 Pan Phil 50M00070P035 M X.7 X 35 Pan Phil 50M00070P00 M X.7 X 0M M Pan Phil 50M05000P00 M5 X. X Pan Phil 50M05000P00 M5 X. X Pan Phil 50M05000P00 M5 X. X 0 Pan Phil 50M05000P0 M5 X. X Pan Phil 50M05000P05 M5 X. X 5 Pan Phil 50M05000P0 M5 X. X Pan Phil 50M05000P00 M5 X. X 0 Pan Phil 50M05000P05 M5 X. X 5 Pan Phil 50M05000P030 M5 X. X 30 Pan Phil 50M05000P035 M5 X. X 35 Pan Phil 50M05000P00 M5 X. X 0 Pan Phil 50M0000P005 M X.00 X 5 Pan Phil 50M0000P00 M X.00 X Pan Phil 50M0000P00 M X.00 X 0 Pan Phil 50M0000P0 M X.00 X Pan Phil 50M0000P0 M X.00 X Pan Phil 50M0000P00 M X.00 X 0 Pan Phil 50M0000P0 M X.00 X Pan Phil 50M0000P05 M X.00 X 5 Pan Phil 50M0000P030 M X.00 X 30 Pan Phil 50M0000P035 M X.00 X 35 Pan Phil 50M0000P00 M X.00 X 0 Pan Phil 50M0000P05 M X.00 X 5 Pan Phil 50M0000P050 M X.00 X 50 Pan Phil 50M0000P00 M X.00 X 0 Pan Phil 50M0000P070 M X.00 X 70 Pan Phil 50M0000P075 M X.00 X 75 Pan Phil 50M005P00 M X.5 X 0 Pan Phil 50M005P0 M X.5 X Pan Phil 50M005P00 M X.5 X 0 Pan Phil 50M005P05 M X.5 X 5 Pan Phil 50M005P030 M X.5 X 30 Pan Phil 50M005P035 M X.5 X 35 Pan Phil 50M005P050 M X.5 X 50 Pan Phil 50M005P070 M X.5 X 70 Pan Phil 50M0050P03 M0 X.50 X 3 Pan Phil 50M0050P0 M0 X.50 X Pan Phil 50M0050P09 M0 X.50 X 9 Pan Phil 50M0050P00 M0 X.50 X 0 Pan Phil 50M0050P05 M0 X.50 X 5 Pan Phil 50M0050P030 M0 X.50 X 30 Pan Phil 50M0050P035 M0 X.50 X 35 Pan Phil 50M0050P050 M0 X.50 X 50 Pan Phil 50M0050P00 M0 X.50 X 0 Pan Phil 5 TELEPHONE: (70) 53- / 53- micro plastics, inc. AX: (70) 53-7

155 PEVIOUS PAGE TIC SCEWS, BOLTS, AND THEADED OD ALL DINSIONS AE IN MILLITES O CON TEN TS IN DEX A-Z XII ITEM NUMBE DESCIPTION ITEM NUMBE DESCIPTION M0000N00 M X. X Pan Slot 50M00070N05 M X.7 X 5 Pan Slot 50M0000N005 M X. X 5 Pan Slot 50M00070N030 M X.7 X 30 Pan Slot 50M0000N00 M X. X Pan Slot 50M00070N035 M X.7 X 35 Pan Slot 50M0000N00 M X. X Pan Slot 50M00070N00 M X.7 X 0 Pan Slot 50M0000N00 M X. X 0 Pan Slot 50M05000N00 M5 X. X Pan Slot 50M0000N0 M X. X Pan Slot 50M05000N00 M5 X. X Pan Slot 50M0000N0 M X. X Pan Slot 50M05000N00 M5 X. X 0 Pan Slot 50M0000N00 M X. X 0 Pan Slot 50M05000N0 M5 X. X Pan Slot 50M0000N05 M X. X 5 Pan Slot 50M05000N05 M5 X. X 5 Pan Slot 50M0505N00 M.5 X.5 X Pan Slot 50M05000N0 M5 X. X Pan Slot 50M0505N005 M.5 X.5 X 5 Pan Slot 50M05000N00 M5 X. X 0 Pan Slot 50M0505N00 M.5 X.5 X Pan Slot 50M05000N05 M5 X. X 5 Pan Slot 50M0505N00 M.5 X.5 X Pan Slot 50M05000N030 M5 X. X 30 Pan Slot 50M0505N00 M.5 X.5 X 0 Pan Slot 50M05000N035 M5 X. X 35 Pan Slot 50M0505N0 M.5 X.5 X Pan Slot 50M05000N00 M5 X. X 0 Pan Slot 50M0505N0 M.5 X.5 X Pan Slot 50M0000N005 M X.00 X 5 Pan Slot 50M0505N00 M.5 X.5 X 0 Pan Slot 50M0000N00 M X.00 X Pan Slot 50M0505N05 M.5 X.5 X 5 Pan Slot 50M0000N00 M X.00 X 0 Pan Slot 50M030050N00 M3 X.5 X Pan Slot 50M0000N0 M X.00 X Pan Slot 50M030050N005 M3 X.5 X 5 Pan Slot 50M0000N0 M X.00 X Pan Slot 50M030050N00 M3 X.5 X Pan Slot 50M0000N00 M X.00 X 0 Pan Slot 50M030050N00 M3 X.5 X Pan Slot 50M0000N0 M X.00 X Pan Slot 50M030050N00 M3 X.5 X 0 Pan Slot 50M0000N05 M X.00 X 5 Pan Slot 50M030050N0 M3 X.5 X Pan Slot 50M0000N030 M X.00 X 30 Pan Slot 50M030050N0 M3 X.5 X Pan Slot 50M0000N035 M X.00 X 35 Pan Slot 50M030050N00 M3 X.5 X 0 Pan Slot 50M0000N00 M X.00 X 0 Pan Slot 50M030050N05 M3 X.5 X 5 Pan Slot 50M0000N05 M X.00 X 5 Pan Slot 50M030050N030 M3 X.5 X 30 Pan Slot 50M0000N050 M X.00 X 50 Pan Slot 50M030050N035 M3 X.5 X 35 Pan Slot 50M0000N00 M X.00 X 0 Pan Slot 50M030050N0 M3 X.5 X Pan Slot 50M0000N070 M X.00 X 70 Pan Slot 50M03500N005 M3.5 X. X 5 Pan Slot 50M0000N075 M X.00 X 75 Pan Slot 50M03500N00 M3.5 X. X Pan Slot 50M005N00 M X.5 X 0 Pan Slot 50M03500N007 M3.5 X. X 7 Pan Slot 50M005N0 M X.5 X Pan Slot 50M03500N00 M3.5 X. X Pan Slot 50M005N00 M X.5 X 0 Pan Slot 50M03500N00 M3.5 X. X 0 Pan Slot 50M005N05 M X.5 X 5 Pan Slot 50M03500N0 M3.5 X. X Pan Slot 50M005N030 M X.5 X 30 Pan Slot 50M03500N0 M3.5 X. X Pan Slot 50M005N035 M X.5 X 35 Pan Slot 50M03500N00 M3.5 X. X 0 Pan Slot 50M005N050 M X.5 X 50 Pan Slot 50M03500N05 M3.5 X. X 5 Pan Slot 50M005N070 M X.5 X 70 Pan Slot 50M03500N035 M3.5 X. X 35 Pan Slot 50M0050N03 M0 X.50 X 3 Pan Slot 50M03500N0 M3.5 X. X 50M00070N003 M X.7 X 3 50M00070N00 M X.7 X 50M00070N00 M X.7 X 50M00070N00 M X.7 X 0 50M00070N0 M X.7 X 50M00070N0 M X.7 X 50M00070N00 M X.7 X 0 Pan Slot 50M0050N0 M0 X.50 X Pan Slot Pan Slot 50M0050N09 M0 X.50 X 9 Pan Slot Pan Slot 50M0050N00 M0 X.50 X 0 Pan Slot Pan Slot 50M0050N05 M0 X.50 X 5 Pan Slot Pan Slot 50M0050N030 M0 X.50 X 30 Pan Slot Pan Slot 50M0050N035 M0 X.50 X 35 Pan Slot Pan Slot 50M0050N050 M0 X.50 X 50 Pan Slot Pan Slot 50M0050N00 M0 X.50 X 0 Pan Slot PAN SLOTTED THEAD SIZE A H J T M M.5 M3 M3.5 M M5 M M M Nominal Screw Length to 3 mm incl. over 3 to 0 mm over 0 to mm over to 50 mm over 50 mm Tolerance On Length mm All tolerances are plus and minus. 0.5 min. 0. min. 0.7 min. 0. min..0 min.. min.. min..9 min.. min. mp@microplastics.com micro plastics, inc. WEBSITE: 55

156 XII THEAD SIZE A H M X 0. M.5 X 0.5 M3 X 0.5 M3.5 X 0. M X 0.7 M5 X 0. M X.0 M X.5 M0 X.5 Q TABLE PEVIOUS PAGE TIC SCEWS, BOLTS, AND THEADED OD I LLI STE PHI LLI PS 50M0000G00 M X. X 50M0000G005 M X. X 5 ITEM NUMBE DESCIPTION ITEM NUMBE DESCIPTION M0000G00 M X. X 50M0000G00 M X. X 50M0000G00 M X. X 0 50M0000G0 M X. X 50M0000G0 M X. X 50M0000G00 M X. X 0 50M0000G05 M X. X 5 50M0505G00 50M0505G005 50M0505G00 50M0505G00 50M0505G00 50M0505G0 50M0505G0 50M0505G00 50M0505G05 M.5 X.5 X M.5 X.5 X 5 M.5 X.5 X M.5 X.5 X M.5 X.5 X 0 M.5 X.5 X M.5 X.5 X M.5 X.5 X 0 M.5 X.5 X 5 50M030050G00 M3 X.5 X 50M030050G005 M3 X.5 X 5 50M030050G00 M3 X.5 X 50M030050G00 M3 X.5 X 50M030050G00 M3 X.5 X 0 50M030050G0 M3 X.5 X 50M030050G0 M3 X.5 X 50M030050G00 M3 X.5 X 0 50M030050G05 M3 X.5 X 5 50M030050G030 M3 X.5 X30 50M030050G035 M3 X.5 X 35 50M030050G0 M3 X.5 X 50M03500G005 50M03500G00 50M03500G007 50M03500G00 50M03500G00 50M03500G0 50M03500G0 50M03500G00 50M03500G05 50M03500G035 50M03500G0 O CON TEN TS M3.5 X. X 5 M3.5 X. X M3.5 X. X 7 M3.5 X. X M3.5 X. X 0 M3.5 X. X M3.5 X. X M3.5 X. X0 M3.5 X. X5 M3.5 X. X 35 M3.5 X. X 50M00070G003 M X.7 X 3 50M00070G00 M X.7 X 50M00070G00 M X.7 X 50M00070G00 M X.7 X 0 50M00070G0 M X.7 X 50M00070G0 M X.7 X 50M00070G00 M X.7 X 0 ill Phil ill Phil ill Phil ill Phil ill Phil ill Phil ill Phil ill Phil ill Phil ill Phil ill Phil ill Phil ill Phil ill Phil ill Phil ill Phil ill Phil ill Phil ill Phil ill Phil ill Phil ill Phil ill Phil ill Phil ill Phil ill Phil ill Phil ill Phil ill Phil ill Phil ill Phil ill Phil ill Phil ill Phil ill Phil ill Phil ill Phil ill Phil ill Phil ill Phil ill Phil ill Phil ill Phil ill Phil ill Phil ill Phil ill Phil ill Phil IN DEX A-Z 50M00070G05 M X.7 X 5 50M00070G030 M X.7 X 30 50M00070G035 M X.7 X 35 50M00070G00 M X.7 X 0 50M05000G00 M5 X. X 50M05000G00 M5 X. X 50M05000G00 M5 X. X 0 50M05000G0 M5 X. X 50M05000G05 M5 X. X 5 50M05000G0 M5 X. X 50M05000G00 M5 X. X 0 50M05000G05 M5 X. X 5 50M05000G030 M5 X. X 30 50M05000G035 M5 X. X 35 50M05000G00 M5 X. X 0 50M0000G005 M X.0 X 5 50M0000G00 M X.00 X 50M0000G00 M X.00 X 0 50M0000G0 M X.00 X 50M0000G0 50M0000G00 M X.00 X M X.00 X 0 50M0000G0 M X.00 X 50M0000G05 50M0000G030 M X.00 X 5 M X.00 X 30 50M0000G035 M X.00 X 35 50M0000G00 M X.00 X 0 50M0000G05 M X.00 X 5 50M0000G050 M X.00 X 50 50M0000G00 M X.00 X 0 50M0000G070 50M0000G075 50M005G00 50M005G0 50M005G00 50M005G05 M X.00 X 70 M X.00 X 75 M X.5 X 0 M X.5 X M X.5 X 0 M X.5 X 5 50M005G030 M X.5 X 30 50M005G035 M X.5 X 35 50M005G050 M X.5 X 50 50M005G070 M X.5 X 70 50M0050G03 50M0050G0 50M0050G09 50M0050G00 50M0050G05 50M0050G030 50M0050G035 50M0050G050 50M0050G00 ALL DINSIONS AE IN MILLITES M0 X.50 X 3 M0 X.50 X M0 X.50 X 9 M0 X.50 X 0 M0 X.50 X 5 M0 X.50 X 30 M0 X.50 X 35 M0 X.50 X 50 M0 X.50 X 0 ill Phil ill Phil ill Phil ill Phil ill Phil ill Phil ill Phil ill Phil ill Phil ill Phil ill Phil ill Phil ill Phil ill Phil ill Phil ill Phil ill Phil ill Phil ill Phil ill Phil ill Phil ill Phil ill Phil ill Phil ill Phil ill Phil ill Phil ill Phil ill Phil ill Phil ill Phil ill Phil ill Phil ill Phil ill Phil ill Phil ill Phil ill Phil ill Phil ill Phil ill Phil ill Phil ill Phil ill Phil ill Phil ill Phil ill Phil ill Phil 5 TELEPHONE: (70) 53- / 53- micro plastics, inc. AX: (70) 53-7

157 TIC SCEWS, BOLTS, AND THEADED OD ITEM NUMBE DESCIPTION ITEM NUMBE DESCIPTION M M X. X 50M M X. X 5 50M M X. X 50M M X. X 50M M X. X 0 50M00000 M X. X 50M00000 M X. X 50M M X. X 0 50M M X. X 5 50M M M M M M M M M M.5 X.5 X M.5 X.5 X 5 M.5 X.5 X M.5 X.5 X M.5 X.5 X 0 M.5 X.5 X M.5 X.5 X M.5 X.5 X 0 M.5 X.5 X 5 50M M3 X.5 X 50M M3 X.5 X 5 50M M3 X.5 X 50M M3 X.5 X 50M M3 X.5 X 0 50M M3 X.5 X 50M M3 X.5 X 50M M3 X.5 X 0 50M M3 X.5 X 5 50M M3 X.5 X 30 50M M3 X.5 X 35 50M M3 X.5 X 50M M M M M M M M M M M M3.5 X. X 5 M3.5 X. X M3.5 X. X 7 M3.5 X. X M3.5 X. X 0 M3.5 X. X M3.5 X. X M3.5 X. X 0 M3.5 X. X 5 M3.5 X. X 35 M3.5 X. X 50M M X.7 X 3 50M M X.7 X 50M M X.7 X 50M M X.7 X 0 50M M X.7 X 50M M X.7 X 50M M X.7 X 0 Q TABLE PEVIOUS PAGE ill Slot ill Slot ill Slot ill Slot ill Slot ill Slot ill Slot ill Slot ill Slot ill Slot ill Slot ill Slot ill Slot ill Slot ill Slot ill Slot ill Slot ill Slot ill Slot ill Slot ill Slot ill Slot ill Slot ill Slot ill Slot ill Slot ill Slot ill Slot ill Slot ill Slot ill Slot ill Slot ill Slot ill Slot ill Slot ill Slot ill Slot ill Slot ill Slot ill Slot ill Slot ill Slot ill Slot ill Slot ill Slot ill Slot ill Slot ill Slot ALL DINSIONS AE IN MILLITES O CON TEN TS 50M M X.7 X 5 50M M X.7 X 30 50M M X.7 X 35 50M M X.7 X 0 50M M5 X. X 50M M5 X. X 50M M5 X. X 0 50M M5 X. X 50M M5 X. X 5 50M M5 X. X 50M M5 X. X 0 50M M5 X. X 5 50M M5 X. X 30 50M M5 X. X 35 50M M5 X. X 0 50M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M X.00 X 5 M X.00 X M X.00 X 0 M X.00 X M X.00 X M X.00 X 0 M X.00 X M X.00 X 5 M X.00 X 30 M X.00 X 35 M X.00 X 0 M X.00 X 5 M X.00 X 50 M X.00 X 0 M X.00 X 70 M X.00 X 75 M X.5 X 0 M X.5 X M X.5 X 0 M X.5 X 5 M X.5 X 30 M X.5 X 35 M X.5 X 50 M X.5 X 70 M0 X.50 X 3 M0 X.50 X M0 X.50 X 9 M0 X.50 X 0 M0 X.50 X 5 M0 X.50 X 30 M0 X.50 X 35 M0 X.50 X 50 M0 X.50 X 0 IN DEX A-Z ill Slot ill Slot ill Slot ill Slot ill Slot ill Slot ill Slot ill Slot ill Slot ill Slot ill Slot ill Slot ill Slot ill Slot ill Slot ill Slot ill Slot ill Slot ill Slot ill Slot ill Slot ill Slot ill Slot ill Slot ill Slot ill Slot ill Slot ill Slot ill Slot ill Slot ill Slot ill Slot ill Slot ill Slot ill Slot ill Slot ill Slot ill Slot ill Slot ill Slot ill Slot ill Slot ill Slot ill Slot ill Slot ill Slot ill Slot ill Slot THEAD SIZE A H J T M X 0. M.5 X 0.5 M3 X 0.5 M3.5 X 0. M X 0.7 M5 X 0. M X.0 M X.5 M0 X I LLI STE SLOTTED XII mp@microplastics.com micro plastics, inc. WEBSITE: 57

158 XII Q TABLE PEVIOUS PAGE O CON TEN TS IN DEX A-Z TIC SCEWS, BOLTS, AND THEADED OD ALL DINSIONS AE IN MILLITES THEAD SIZE A * H M X 0. M.5 X 0.5 M3 X 0.5 M3.5 X 0. M X 0.7 M5 X 0. M X M X.5 M0 X max ref..5 max ref..7 max ref..3 max ref..7 max ref..7 max ref. 3.3 max ref.. max ref. 5.0 max ref. * H Dimension is a reference dimension only. ITEM NUMBE DESCIPTION ITEM NUMBE DESCIPTION M0505I00 M.5 X.5 X lat Phil 50M00070I0 M X.7 X LAT PHILLIPS 50M0505I005 M.5 X.5 X 5 lat Phil 50M0505I00 M.5 X.5 X lat Phil 50M0505I00 M.5 X.5 X lat Phil 50M0505I00 M.5 X.5 X 0 lat Phil 50M0505I0 M.5 X.5 X lat Phil 50M0505I0 M.5 X.5 X lat Phil 50M0505I00 M.5 X.5 X 0 lat Phil 50M0505I05 M.5 X.5 X 5 lat Phil 50M030050I005 M3 X.5 X 5 lat Phil 50M030050I00 M3 X.5 X lat Phil 50M030050I00 M3 X.5 X lat Phil 50M030050I00 M3 X.5 X 0 lat Phil 50M030050I0 M3 X.5 X lat Phil 50M030050I0 M3 X.5 X lat Phil 50M030050I00 M3 X.5 X 0 lat Phil 50M030050I05 M3 X.5 X 5 lat Phil 50M03500I005 M3.5 X. X 5 lat Phil 50M03500I00 M3.5 X. X lat Phil 50M03500I00 M3.5 X. X lat Phil lat Phil 50M00070I00 M X.7 X 0 lat Phil 50M00070I05 M X.7 X 5 lat Phil 50M05000I00 M5 X. X lat Phil 50M05000I00 M5 X. X lat Phil 50M05000I00 M5 X. X 0 lat Phil 50M05000I0 M5 X. X lat Phil 50M05000I0 M5 X. X lat Phil 50M05000I00 M5 X. X 0 lat Phil 50M05000I05 M5 X. X 5 lat Phil 50M05000I030 M5 X. X 30 lat Phil 50M05000I00 M5 X. X 0 lat Phil 50M0000I00 M X.00 X lat Phil 50M0000I00 M X.00 X 0 lat Phil 50M0000I0 M X.00 X lat Phil 50M0000I0 M X.00 X lat Phil 50M0000I00 M X.00 X 0 lat Phil 50M0000I05 M X.00 X 5 lat Phil 50M0000I035 M X.00 X 35 lat Phil 50M0000I05 M X.00 X 5 lat Phil 50M03500I00 M3.5 X. X 0 lat Phil 50M005I00 M X.5 X 0 lat Phil 50M03500I0 M3.5 X. X lat Phil 50M005I0 M X.5 X lat Phil 50M03500I0 M3.5 X. X lat Phil 50M005I00 M X.5 X 0 lat Phil 50M03500I00 M3.5 X. X 0 lat Phil 50M005I05 M X.5 X 5 lat Phil 50M03500I05 M3.5 X. X 5 lat Phil 50M005I030 M X.5 X 30 lat Phil 50M03500I035 M3.5 X. X 35 lat Phil 50M005I050 M X.5 X 50 lat Phil 50M00070I00 M X.7 X lat Phil 50M0050I00 M0 X.50 X 0 lat Phil 50M00070I00 M X.7 X lat Phil 50M0050I05 M0 X.50 X 5 lat Phil 50M00070I00 M X.7 X 0 lat Phil 50M0050I035 M0 X.50 X 35 lat Phil 50M00070I0 M X.7 X lat Phil 5 TELEPHONE: (70) 53- / 53- micro plastics, inc. AX: (70) 53-7

159 PEVIOUS PAGE TIC SCEWS, BOLTS, AND THEADED OD ALL DINSIONS AE IN MILLITES O CON TEN TS IN DEX A-Z XII THEAD SIZE A H J T M X 0. M.5 X 0.5 M3 X 0.5 M3.5 X 0. M X 0.7 M5 X 0. M X M X.5 M0 X max ref..5 max ref..7 max ref..3 max ref..7 max ref..7 max ref. 3.3 max ref.. max ref. 5.0 max ref ITEM NUMBE DESCIPTION ITEM NUMBE DESCIPTION M0000H00 M X. X lat Slot 50M00070H00 M X.7 X 0 lat Slot 50M0000H005 M X. X 5 lat Slot 50M00070H0 M X.7 X lat Slot 50M0000H00 M X. X lat Slot 50M00070H05 M X.7 X 5 lat Slot 50M0000H00 M X. X lat Slot 50M00070H0 M X.7 X lat Slot 50M0000H00 M X. X 0 lat Slot 50M00070H00 M X.7 X 0 lat Slot 50M0000H0 M X. X lat Slot 50M00070H05 M X.7 X 5 lat Slot 50M0000H0 M X. X lat Slot 50M00070H030 M X.7 X 30 lat Slot 50M0000H0 M X. X lat Slot 50M00070H035 M X.7 X 35 lat Slot 50M0000H05 M X. X 5 lat Slot 50M05000H00 M5 X. X lat Slot 50M0505H00 M.5 X.5 X lat Slot 50M05000H00 M5 X. X lat Slot 50M0505H005 M.5 X.5 X 5 lat Slot 50M05000H00 M5 X. X 0 lat Slot 50M0505H00 M.5 X.5 X lat Slot 50M05000H0 M5 X. X lat Slot 50M0505H00 M.5 X.5 X lat Slot 50M05000H05 M5 X. X 5 lat Slot 50M0505H00 M.5 X.5 X 0 lat Slot 50M05000H0 M5 X. X lat Slot 50M0505H0 M.5 X.5 X lat Slot 50M05000H00 M5 X. X 0 lat Slot 50M0505H0 M.5 X.5 X lat Slot 50M05000H05 M5 X. X 5 lat Slot 50M0505H00 M.5 X.5 X 0 lat Slot 50M05000H030 M5 X. X 30 lat Slot 50M0505H05 M.5 X.5 X 5 lat Slot 50M05000H00 M5 X. X 0 lat Slot 50M030050H005 M3 X.5 X 5 lat Slot 50M0000H00 M X.00 X lat Slot 50M030050H00 M3 X.5 X lat Slot 50M0000H00 M X.00 X 0 lat Slot 50M030050H00 M3 X.5 X lat Slot 50M0000H0 M X.00 X lat Slot 50M030050H00 M3 X.5 X 0 lat Slot 50M0000H0 M X.00 X lat Slot 50M030050H0 M3 X.5 X lat Slot 50M0000H00 M X.00 X 0 lat Slot 50M030050H05 M3 X.5 X 5 lat Slot 50M0000H05 M X.00 X 5 lat Slot 50M030050H0 M3 X.5 X lat Slot 50M0000H035 M X.00 X 35 lat Slot 50M030050H00 M3 X.5 X 0 lat Slot 50M0000H00 M X.00 X 0 lat Slot 50M030050H05 M3 X.5 X 5 lat Slot 50M0000H05 M X.00 X 5 lat Slot 50M030050H030 M3 X.5 X 30 lat Slot 50M0000H050 M X.00 X 50 lat Slot 50M030050H0 M3 X.5 X lat Slot 50M005H0 M X.5 X lat Slot 50M03500H005 M3.5 X. X 5 lat Slot 50M005H00 M X.5 X 0 lat Slot 50M03500H00 M3.5 X. X lat Slot 50M005H05 M X.5 X 5 lat Slot 50M03500H00 M3.5 X. X lat Slot 50M005H030 M X.5 X 30 lat Slot 50M03500H00 M3.5 X. X 0 lat Slot 50M005H050 M X.5 X 50 lat Slot 50M03500H0 M3.5 X. X lat Slot 50M0050H00 M0 X.50 X 0 lat Slot 50M03500H05 M3.5 X. X 5 lat Slot 50M0050H05 M0 X.50 X 5 lat Slot 50M03500H035 M3.5 X. X 35 lat Slot 50M0050H030 M0 X.50 X 30 lat Slot 50M00070H00 M X.7 X M M lat Slot 50M0050H035 M0 X.50 X 35 lat Slot 50M00070H00 M X.7 X M M lat Slot 50M0050H00 M0 X.50 X 0 lat Slot LAT SLOTTED mp@microplastics.com micro plastics, inc. WEBSITE: 59

160 XII M X 0.7 M5 X 0. M X.0 M X.5 M0 X.5 Q TABLE PEVIOUS PAGE TIC SCEWS, BOLTS, AND THEADED OD THEAD SIZE A J T O CON TEN TS IN DEX A-Z ALL DINSIONS AE IN MILLITES GUB SLOTTED ITEM NUMBE DESCIPTION ITEM NUMBE DESCIPTION M M X.7 X 3 Grub Slot 50M00000 M X.00 X Grub Slot 50M M X.7 X Grub Slot 50M M X.00 X 5 Grub Slot 50M M X.7 X Grub Slot 50M M X.00 X 30 Grub Slot 50M M X.7 X 0 Grub Slot 50M M X.00 X 35 Grub Slot 50M M X.7 X Grub Slot 50M M X.00 X 5 Grub Slot 50M M X.7 X Grub Slot 50M M X.00 X 50 Grub Slot 50M M X.7 X 0 Grub Slot 50M M X.00 X 0 Grub Slot 50M M X.7 X 5 Grub Slot 50M M X.00 X 70 Grub Slot 50M M X.7 X 30 Grub Slot 50M M X.00 X 75 Grub Slot 50M M X.7 X 35 Grub Slot 50M00500 M X.5 X Grub Slot 50M M X.7 X 0 Grub Slot 50M00500 M X.5 X 0 Grub Slot 50M M5 X. X Grub Slot 50M0050 M X.5 X Grub Slot 50M M5 X. X Grub Slot 50M00500 M X.5 X 0 Grub Slot 50M M5 X. X 0 Grub Slot 50M00505 M X.5 X 5 Grub Slot 50M M5 X. X Grub Slot 50M M X.5 X 30 Grub Slot 50M M5 X. X Grub Slot 50M M X.5 X 35 Grub Slot 50M M5 X. X 0 Grub Slot 50M M X.5 X 50 Grub Slot 50M M5 X. X 5 Grub Slot 50M M0 X.50 X 3 Grub Slot 50M M5 X. X 30 Grub Slot 50M00500 M0 X.50 X Grub Slot 50M M5 X. X 0 Grub Slot 50M M0 X.50 X 9 Grub Slot 50M M X.00 X 5 Grub Slot 50M M0 X.50 X 0 Grub Slot 50M M X.00 X Grub Slot 50M M0 X.50 X 5 Grub Slot 50M M X.00 X 0 Grub Slot 50M M0 X.50 X 30 Grub Slot 50M00000 M X.00 X Grub Slot 50M M0 X.50 X 35 Grub Slot 50M00000 M X.00 X Grub Slot 50M M0 X.50 X 50 Grub Slot 50M M X.00 X 0 Grub Slot 50M M0 X.50 X 0 Grub Slot HEX SOCKET HEAD CAP SCEW ITEM NUMBE DESCIPTION M0050S03 50M0050S0 50M0050S09 50M0050S00 50M0050S05 50M0050S030 50M0050S035 50M0050S050 50M0050S00 M0 X.50 X 3 M0 X.50 X M0 X.50 X 9 M0 X.50 X 0 M0 X.50 X 5 M0 X.50 X 30 M0 X.50 X 35 M0 X.50 X 50 M0 X.50 X 0 Hex Soc Hex Soc Hex Soc Hex Soc Hex Soc Hex Soc Hex Soc Hex Soc Hex Soc Nominal Screw Size M. thru M0 M thru M0 Over M0 Nominal Screw Length Tolerance on Length, mm to mm, incl. over to 50 mm over 50 to 0 mm over 0 to 00mm over 00 mm All tolerances are plus and minus. THEAD HEX SIZE A H J DEPTH M nom min. 0 TELEPHONE: (70) 53- / 53- micro plastics, inc. AX: (70) 53-7

161 PEVIOUS PAGE TIC SCEWS, BOLTS, AND THEADED OD ALL DINSIONS AE IN MILLITES NYLON THEADED OD O CON TEN TS IN DEX A-Z XII This versatile threaded rod stock is easily cut to size, resistant to most chemicals,electrically insulating, nonmagnetic, light-weight, low thermal conductivity, vibration and abrasion resistant. Stock length is meter. We can furnish cut to your length with a nominal cutting charge. Other plastic materials can be furnished on special order. ITEM NUMBE 3M00070T 3M05000T 3M0000T 3M005T DESCIPTION M X.07 THEADED OD M 5 X.0 THEADED OD M X.0 THEADED OD M X.5 THEADED OD ALL DINSIONS AE IN MILLITES TIC NUTS XIII NYLON WING NUTS ITEM NUMBE DESCIPTION A B C D 0M00070WN M X M05000WN M5 X M0000WN M X M005WN M X M0050WN M0 X M075WN M X DECO WING NUTS TOLEANCE +/-. mm TOLEANCE +/-. mm ITEM NUMBE DESCIPTION A B C D 0M030050DWN M3 X M00070DWN M X M05000DWN M5 X M0000DWN M X ITEM NUMBE DESCIPTION A B C D 0M030050DLWN M3 X M00070DLWN M X M05000DLWN M5 X M0000DLWN M X DECO LOCKING WING NUTS mp@microplastics.com micro plastics, inc. WEBSITE:

162 XIII Q TABLE PEVIOUS PAGE O CON TEN TS TIC NUTS IN DEX A-Z ALL DINSIONS AE IN MILLITES NYLON THUMB NUTS TOLEANCE +/-. mm ITEM NUMBE DESCIPTION A B C 0M00070TN M X NYLON HEX NUTS ITEM NUMBE DESCIPTION H 0M0000HN M X 0. 0M0505HN M.5 X 0.5 0M030050HN M3 X 0.5 0M03500HN M3.5 X 0. 0M00070HN M X 0.7 0M05000HN M5 X 0. 0M0000HN M X.0 0M005HN M X.5 0M0050HN M0 X.50 TOLEANCE +/-. mm DESIGNED O STEEL SCEWS NYLON LOCK NUTS TOLEANCE +/-. mm ITEM NUMBE DESCIPTION H 07M0000LN M X NYLON CAP NUTS TOLEANCE +/-. mm ITEM NUMBE DESCIPTION H * E. 05M00070CN M X M05000CN M5 X M0000CN M X M005CN M X M0050CN M0 X M075CN M X M000CN M X M0050CN M0 X LOCKING CAP NUTS 05M00070LCN M X M05000LCN M5 X 0. 05M0000LCN M X TELEPHONE: (70) 53- / 53- micro plastics, inc. AX: (70) 53-7

163 PEVIOUS PAGE O CON TEN TS IN DEX A-Z TIC WASHES AND SCEW INSULATOS Nylon Screw Insulators are used to isolate metal screws electrically as well as to reduce corrosion. They can be used as light load bearings in many applications. Specials can be made to order for small tool charge. Specifiy the screw size and length when ordering. XIV TOLEANCE +/-. mm TOLEANCE +/-.3 mm NYLON LAT WASHES ITEM NUMBE DESCIPTION A B T M M M05500 M M M M M M M M05000 M M0050 M M0000 M M05500 M M0050 M SIZES NOT SHOWN WILL BE TOOLED UPON EQUEST NYLON SCEW INSULATOS ITEM NUMBE DESCIPTION L A B C D 0SCM00003 SCM X SCM0000 SCM X SCM00005 SCM X SCM0000 SCM X SCM00300 SCM 3 X SCM SCM 3 X SCM00300 SCM 3 X SCM SCM 3 X SCM00300 SCM 3 X SCM SCM 3 X SCM00300 SCM 3 X SCM SCM 3 X SCM00300 SCM 3 X SCM00003 SCM X SCM0000 SCM X SCM00005 SCM X SCM00007 SCM X SCM00009 SCM X SCM SCM 5 X SCM00500 SCM 5 X SCM SCM 5 X SCM SCM 5 X SCM SCM 5 X SCM0000 SCM X SCM0000 SCM X SCM0000 SCM X SCM0000 SCM X SCM000 SCM X SCM0000 SCM X SCM0000 SCM X SCM0000 SCM X SCM0000 SCM X M M 0.0 M M. 0SCM000 SCM X..5 M M 0.0 M M. mp@microplastics.com micro plastics, inc. WEBSITE: 3

164 TIC SPACES XV ITEM NUMBE DESC. A B L ITEM NUMBE DESC. A B L ITEM NUMBE DESC. A B L ALL DINSIONS AE IN MILLITES TIC NYLON SPACES MATEIAL: HEAT STABILIZED BLACK NYLON TOLEANCE ON A AND L DINSIONS AE +/-.3 mm TOLEANCE ON B DINSION IS +/-. mm TELEPHONE: (70) 53- / 53- micro plastics, inc. AX: (70) 53-7 Q PEVIOUS PAGE IN DEX A-Z TABLE O CON TEN TS

165 PEVIOUS PAGE O CON TEN TS IN DEX A-Z TIC ASTENE ASSOTNT KITS MOLDED NYLON ASTENES POVIDE ELECTICAL INSULATION, VIBATION AND COOSION ESISTANCE. NYLON KITS HAVE A LOW THEMAL CONDUCTIVITY, XVI AE NON-MAGNETIC AND HAVE A HIGH STENGTH-TO- WEIGHT ATIO. PACKAGED IN LAGE EUSABLE TANS- PAENT PLASTIC STOAGE BOXES. IDEAL O: POTOTYPE WOK - Large working assortments. PODUCT DESIGN - Latest designs for increased productivity. MODEL MAKING - Commercially available standard parts. SHOP AND MAINTENANCE - Convenient selection. # OASO95M SM MACHINE SCEWS OVE 950 NYLON ASTENES OVE 0 DIEENT SIZES AND TYPES Assortment Kit Consists of Approximately: 0 - M X to 5 Long 70 - M.5 X to 5 Long 5 - M3 X 5 to 5 Long 0 - M3.5 X 5 to 5 Long 30 - M X to 5 Long 35 - M X to 5 Long 5 - M X 5 to 5 Long # OASO5WM LAT WASHES OVE 700 NYLON ASTENES Assortment Kit Consists of Approximately: M 5 - M M M M M M lat Washers lat Washers lat Washers lat Washers lat Washers lat Washers lat Washers # OASO705SCM SCEW INSULATOS OVE 700 NYLON ASTENES OVE 0 DIEENT SIZES AND TYPES Assortment Kit Consists of Approximately: 50 - M Screw Insulators 5 - M3 Screw Insulators 00- M Screw Insulators 5 - M5 Screw Insulators 05 - M Screw Insulators # OASO90SPM SPACES OVE 00 NYLON ASTENES OVE 30 DIEENT SIZES AND TYPES Assortment Kit Consists of Approximately: 05 - M X 3 to 5 Long 95 - M.5 X 3 to 5 Long 0 - M3 X 3 to 5 Long 50 - M3.5 X 3 to 0 Long 0 - M X 3 to 5 Long 50 - M5 X 3 to 5 Long 55 - M X 3 to 5 Long # OASO700SWSM SHOULDE WASHES OVE 000 NYLON ASTENES OVE 0 DIEENT SIZES AND TYPES Assortment Kit Consists of Approximately: 35 - M Shoulder Washers 5 - M3 Shoulder Washers 0 - M Shoulder Washers 5 - M5 Shoulder Washers 05 - M Shoulder Washers # OASO55M M N MACHINE SCEWS AND NUTS OVE 55 NYLON ASTENES OVE 30 DIEENT SIZES AND TYPES Slotted Cheese Head, Hex Head, illister Head and 90 lat Head Styles,MACHINE SCEWS in sizes; Assortment Kit Consists of Approximately: 00 - M3 X 5 X to M3.5 X X 5 to M X 7 X to 00 - M5 X X to 30 - M X.00 X to 00 - Metric Nuts & Washers mp@microplastics.com micro plastics, inc. WEBSITE: 5

166 INO SIZE 0-0 Q PEVIOUS PAGE MICO PLASTICS' MOLDED NYLON / ASTENES CHANICAL TEST DATA - UNC - UN ULTIMATE TOQUE NO TEST ---- In Oz. 30 In Oz. 5 In Lbs. In Lbs. 7 In Lbs. 3 In Lbs. TABLE MACHINE SCEWS BEOE DEOMATION NO TEST In Oz. -0 In Oz. -3 In Lbs. - In Lbs. 3- In Lbs. 9-0 In Lbs. O CON TEN TS TENSILE TEST MAX TOQUE YIELD LBS. BEAK LBS IN DEX A-Z Nylon / meets MIL-M093B "A" Type, LP0A, and ASTM D79- Type, GDE All test performed per ASTM specifications. Parts molded in Nylon /, dry as molded, unmoisturized, at 73 / 3 C. esults are average of random parts tested. DOUBLE SHEA YIELD LBS. BEAK LBS NO TEST HEX NUTS # # ECOENDED TOQUE SIZE TENSILE LBS. TENSILE TOQUE BEOE DEOMATION 0-0 5/ - 3/ - / -3 5/ ,37 3,7 Test # Pull Test -Nylon Nut on Metal Screw In Lbs. 5. In Lbs.. In Lbs. 7 In Lbs. In Lbs. 9.3 In Lbs..3 In Lbs. 7 In Lbs. 5.7 t Lbs..5 In Lbs. In Lbs. 5 In Lbs. 5.5 In Lbs..5 In Lbs. 7 In Lbs. In Lbs. 7 In Lbs. 3 t Lbs. 3.7 t.lbs. 30 t Lbs. Test # Torque on Nylon Nut on Metal Screw CAP SCEWS TENSILE TEST DOUBLE SHEA MAX TOQUE ULTIMATE BEOE YIELD BEAK YIELD BEAK SIZE TOQUE DEOMATION LBS. LBS. LBS. LBS. -0 5/ - 3/ - / -3 5/ - 9 In Lbs. 37 In Lbs. 9 In Lbs. t. Lbs. t. Lbs. 5- In Lbs. 3-3 In Lbs. 5- In Lbs. 7- t. Lbs. -9 t. Lbs TELEPHONE: (70) 53- / 53- micro plastics, inc. AX: (70) 53-7

167 Q PEVIOUS PAGE TABLE O CON TEN TS IN DEX A-Z MICO PLASTICS' MOLDED NYLON / ASTENES CHANICAL TEST DATA - TIC INO Data listed if for informational purposes only shall not be used to establish specifications limits or used alone as the basis of design. MACHINE SCEWS TENSILE TEST DOUBLE SHEA MAX TOQUE ULTIMATE BEOE YIELD BEAK YIELD BEAK SIZE TOQUE DEOMATION LBS. LBS. LBS. LBS. M X. M.5 X 5 M3 X.5 M3.5 X. M X.7 M5 X. M X. M X.5 M0 X 50 HEX NUTS SIZE TENSILE ULTIMATE TOQUE M M.5 M3 M3.5 M M5 M M M0 NO TEST NO TEST.3 Nm..3 N..5Nm..93 Nm..3 Nm Nm. 5.3 Nm. NO TEST NO TEST.-. Nm..-.3 Nm Nm Nm..-.7 Nm..5-. Nm Nm. NO TEST 35.3 N..3 N N. 5.9 N N N N. 3. N. 7. N..9 N. N. 53 N. N. 7 N. 5 N..77 N. 79 N. N/B N/B N/B N/B N/B N/B 9 N. 7 N. N/B 9 N. 5 N. 9 N. 37 N. 00 N. 0 N. 0 N. 90 N. 50 N. NO TEST NO TEST NO TEST.3 CM/ KG.5 CM/ KG.3 7. CM/ KG 5. CM/ KG 9.93 CM/ KG NYLON / M ECHANICAL POPETIES ( 73 / 3 C ) N. 9 N. 39 N. 05 N. 3 N. 3 N. 77 N. 303 N. 50 N. Tensile Strength Elongation Shear Strength lexuaral Modulus Impact Strength Hardness Specific gravity Melting Point Dielectric Strength Underwriters Laboratory ating D3 D3 D73 D790 D D75 D79 D79 D9 BUL. 9,000psi 0% 9,00psi 0,000psi.0 ft/lb/in v/mil 9V.7 MPa 0%. MPa.,7 MPa 5.5 kg/cm M C 0 OHM-CM 9V mp@microplastics.com micro plastics, inc. WEBSITE: 7

168 PEVIOUS PAGE O CON TEN TS GENEAL INOMATION IN DEX A-Z INO TOLEANCES AND QUALITY O INJECTION M OLDED NYLON SCEWS Micro Plastics' molded nylon components are accurately molded of Type / Nylon. They are tough, resistant to corrosion, light weight and good electrical insulators. Nylon components conform to irregular surfaces, provide vibration dampening, and offer an inexpensive alternative to more expensive metal parts. Molded threads approximate UNC/UN A and B. Metric approximate g/ H. Tolerances are generally held to Industrial asteners Institute Standards for inch and metric screws. However, it is often more sensible to try samples or small order quantities before changing from one product to another. Plastic molding has varying degrees of quality. If often involves small amounts of flash, knockout pin marks, gates, sinks, and other slight imperfections. Screws and bolts are gated on the threaded end. It is possible for the gate to leave an extra projection of up to.05" Nylon screws have been available for many years commercially. They are either machined on a screw machine or injection molded. The machined parts are made from extruded nylon rod stock and can be held to relatively close tolerances during the machining process. Nylon, however, has the unfortunate property of absorbing moisture from its environment which causes significant changes in its dimensions. So even though parts may have been accurately machined, a moist atmosphere can cause fit problems. Conversely, parts that have been moisture conditioned can lose moisture causing dimensional problems. If the overall length of a screw grows, it obviously affects the threads per inch thus causing a tight fit. Changes in the moisture content can also have an affect on the outside diameter, pitch diameter and the root diameter. Injection molded nylon screws also suffer from moisture problems but in addition, have inherent tooling problems. All molded nylon screws come from mold cavities parted along the length of the screw. These cavities have two halves that must be matched exactly to produce a perfect part. The cavity halves are doweled together with leader pins when the mold closes to provide the match required. Other locking devices are also employed to hold the halves of the mold in alignment. In the course of molding production quantities, these leader pins and locks suffer some wear. The mold base holding the cavities wears. The molding machine wears causing slight press platen misalignment. Small amounts of dirt on the mold can cause slight mismatch. rom the time the tooling begins to run in production, the entire process begins to work against perfect alignment. Mold temperature changes from room temperature to production temperature causes the mismatch condition to worsen. At some point in time, the various factors affecting mismatch reach a condition that causes the molded screw to be unsatisfactory for the user. Then it is necessary to rework the mold to bring it up to its original condition. Since nylon is somewhat flexible, generally molded nylon screws are not held to as quite close tolerances as metal screws. A slight mismatch and minor flash at the parting line is not as serious as it would be in a metal part. End users who submit nylon screws to go-no go gages without trying the fastener in its actual functional application are generally causing unnecessary difficulties for themselves and their supplier. The fact is that because of the many areas of potential process variables, nylon screws made by injection molding are simply not measurable by the same methods as metal screws. They just are not capable of being manufactured to as close tolerances as metal screws. The development of the tooling for nylon screws, plus the molded conditions, is a carefully kept secret. Tooling such as this is an evolutionary process. The quality of parts being manufactured today with today s tooling is obviously superior to those made in the beginning. Slight improvements have gradually been made over the years. Since we have production tooling for nearly 3,000 sizes, if we make tooling improvements it is not practical to go back and remake 3,000 molds each time we make an improvement. We do, however, rework and replace as we go along any obviously unsatisfactory tooling. This is a continual process with new sizes being added constantly and at the same time remaking tooling whenever the circumstances require it. Occasionally, a few unacceptable parts may escape our quality control procedures. If you receive unsuitable parts, let us know immediately. We will do whatever we can to correct the them. All nylon screws are molded in a natural color resin. If you require black color, or some other identifying color (not a color match) these parts are made by dyeing the nylon screw with IT dye in a water solution held at about 00 o. which adds color but also moisture to the nylon. As stated previously, nylon screws change considerably with the loss or gain of moisture. Nylon screw, as they come from the molding machine contain about.5% moisture, After dyeing in a IT dye, the moisture content increases to about 3-%. Low moisture nylon is more rigid than moisture conditioned material. Impact strength and toughness increases with moisture addition. lexibility also increases with higher moisture content which causes difficulties for the user on occasion. If you need a solid molded color, a closer than normal tolerance a special grade of nylon or other plastic material, we can furnish whatever variation or specialty using special molds and set up. This, of course, adds considerably to the cost. We are here to serve you, so tell us what you need. TOLEANCES O INJECTION M OLDED NYLON STANDAD COM PONENTS +/-.005 ON DINSIONS THU.5 +/-.3 ON DINSIONS THU 5. +/-.00 ON DINSIONS OM. THU.000 +/-.0 ON DINSIONS OM 5.9 THU 5. +/-.00 ON DINSIONS OM.00 THU.500 +/-.5 ON DINSIONS OM 5. THU 3.0 +/-.05 ON DINSIONS LAGE THAN.500 +/-.3 ON DINSIONS LAGE THAN 3.O +/-.05 ON ACTIONAL DINSIONS TELEPHONE: (70) 53- / 53- micro plastics, inc. AX: (70) 53-7

169 PEVIOUS PAGE O CON TEN TS TEMS IN DEX A-Z MINIMUM ODE $00.00 MINIMUM LINE CHAGE $0.00 INO PLEASE MAK ALL TELEPHONE ODES CONIMING TO AVOID POSSIBLE DUPLICATION. General - % 0 net 30. OB lippin, Arkansas, No transportation allowed. Shipping method to be at seller s discretion unless buyer specifies routing. Shipments will not be insured unless requested by buyer. Buyer will bear cost of insurance and any other unusual transportation cost. Orders will be acknowledged with our standard terms of sale current at the time order is placed. Prices - Quantity prices apply only to orders for parts which can be produced in one production run and are scheduled for release within a 0 day period from the first scheduled production run. Prices - We reserve the right to increase prices when a careful review of our costs indicates a need for additional revenue. Tooling - We will maintain tooling for a reasonable time in accordance with good industry practice. Molds that will not produce acceptable parts after reasonable maintenance will be subject to negotiation. Tooling is not insured unless specifically requested. In those cases an additional charge will be made for insurance cost. Delivery - Unless otherwise specifically provided in writing, delivery of the products hereunder shall be OB point of shipment, In all cases, risk of loss or damage to goods in transit shall fall upon the purchaser, whose responsibility it shall be to file claims with the carrier. Shipping dates are approximate and are based upon the prompt receipt of all necessary information. We shall not be liable for delay in delivery due to causes beyond our reasonable control. Cancellation - Orders are not subject to cancellation, change, reduction in amount, or suspension of deliveries except with our consent and upon terms which protect us from loss. Patents - The Purchaser shall hold us harmless against any expense or loss resulting from infringement of patents or trademarks arising from compliance with Purchaser s designs or specifications or instructions. Quantity - All parts are accurately counted on sophisticated electronic scales compensated for slight weight variations due to minor mold cavity differentials. Custom part shipments are subject to a +/- 0% order quantity variation. eturned Material Authorization - If parts are found to deviate beyond tolerances, mail samples back to us with your report, we will then, upon our findings issue a MA number. NO MATEIAL will be accepted for credit without a MA. Unauthorized returns will be shipped back and reinvoiced with a minimum handling charge of $50.00 added. Claims - Inspect all shipments within 5 days of the date of shipment. ailure to advise us of defects on shipments within the 5-day period will constitute acceptance of the shipment. Any purchase order with terms or clauses which are in conflict with the terms listed above, and/ or any order with terms other than those listed herein is voidable by Micro Plastics, Inc. We reserve the right to discontinue items, change specifications or design at any time without notice and without incurring any obligations. CAUTION: All shipments are moisture packed. Do not open sealed package until use, reseal after opening. mp@microplastics.com micro plastics, inc. WEBSITE: 9