Part List ASSEMBLY INSTRUCTIONS FUZ5B-LO/FUZ6B-HI. Seat. Armrests. Star Base. Caster. Arm Bolts. Back Bolts (M8 X 15mm) J K.
|
|
- Debra Sophia Bates
- 5 years ago
- Views:
Transcription
1
2 ASSEMBLY INSTRUCTIONS FUZ5B-LO/FUZ6B-HI Pat List Key Desciption Pat Qty. Spae A FUZ5B-LO Backest B FUZ6B-HI Backest C Seat D Amests ( left & ight amest) 2 E Seat Post(Cylinde) F Sta Base G Caste 5 H Am Bolts (M8 X 7mm) 6 I J K Back Bolts (M8 X 5mm) Washes fo Am Bolts (Ø8.3*2.5*2mm) Allen Wench 3 6
3 E K H J H J D F D C G Pess the Castes (G) into the holes at the end of each leg of the Base (F). Inset Seat Post (E) into the cente hole of the Base (F). I Please be caeful to use the coect Am Bolts (H), Washes (J) and Amests (D) which ae maked Left and Right. Fo easy assembly, place the Seat Cushion (C) face down on a flat suface. Attach Amest (D) to the Seat Cushion (C) as shown using Am Bolt (H) with Washe (J) on each am. Tighten the bolts secuely with the enclosed Allen Wench (K). C I K Seat must slide into the slot on back. B Please be caeful to use the coect Back Bolts (I). Attach the Backest (B) to the Seat Cushion (C) using 3 Back Bolts (I). Tighten the bolts secuely with the enclosed Allen Wench (K). Now tun the assembled seat upight and locate the cente hole of the Mechanism ove the Seat Post. Push down fimly until the connection is secue.
4 A HEADREST HEIGHT ADJUSTMENT A2 HEADREST ANGLE ADJUSTMENT A HEADREST HEIGHT ADJUSTMENT While seated, hold headest fame and move up o down to adjust height. Thee ae 5 positions with a 2.36 ange of adjustment. Fo FUZ6B-HI only. A2 HEADREST ANGLE ADJUSTMENT A3 HEADREST FORWARD AND BACKWARD ADJUSTMENT While seated, hold the headest cushion and tun to adjust the angle. The Headest has a 58º angle adjustment. Fo FUZ6B-HI only. A3 HEADREST FORWARD AND BACKWARD ADJUSTMENT While seated, push the headest cushion fowad and backwad to a desied position. Thee is a 3.9" ange of adjustment. Fo FUZ6B-HI only. B BACKREST TILT ANGLE ADJUSTMENT B BACKREST TILT ANGLE ADJUSTMENT B2 BACKREST TENSION ADJUSTMENT While seated, pull the single od contol leve completely backwad and lean against the back. When you desied angle is achieved, etun the leve to the oiginal middle positions to lock you tilt angle into place. Thee ae 3 positions that povide 27º of ange. B2 BACKREST TENSION ADJUSTMENT While seated, tun the Backest Tilt Tension Adjustment knob clockwise o counteclockwise to adjust the tilt tension to you pefeed level of esistance.
5 C ARMREST HEIGHT ADJUSTMENT C ARMREST HEIGHT ADJUSTMENT A. While seated, push the button on the outside of each am and move the amest up o down. Release the button when you have eached you desied height. Thee ae five positions whee the am height can be locked. The am height adjustment ange is 6.3. B. The amest at a 90 º angle while the amest is " highe than the elbow povides optimum comfot. D SEAT HEIGHT ADJUSTMENT D SEAT HEIGHT ADJUSTMENT While seated, pull the single od contol leve upwad and hold it while aising o loweing the seat to each you desied seat height. When the leve is eleased to its oiginal position, the seat height is locked. The seat height adjustment ange is appoximately 3.3.
6 OUR PROMISE. They say with age comes wisdom. And while we ve leaned a lot since we sold ou fist office chai in 979, even then we knew that supeio caftsmanship and design ae essential ingedients in deliveing eal value fo ou customes. All these yeas late, those thee simple pillas still stand behind ou pomise of exceptional seating with evey chai we sell. DESIGN CRAFTSMANSHIP VALUE Euotech. Sit Smate. THE EUROTECH WARRANTY Fo all poducts except fo 24/7 chais (see below), Euotech waants to the oiginal puchase all components fo the life of the poduct with the exception of upholstey and foam, which will be waanted fo five yeas. Fo 24/7 chais, Euotech waants to the oiginal puchase of all 24/7 chais all components fo 0 yeas with the exception of upholstey and foam which will be waanted fo 2 yeas. Euotech waants to the oiginal puchase that all pats will be fee fom mateial defects. Euotech will epai o eplace, at its option, any unalteed components. Euotech does not waant any aftemaket hadwae that is installed on the poduct. Euotech s waanty is limited to the nomal use of the poduct in a foty hou wok week and a 250lb. weight limit unless othewise noted. Euotech shall NOT be liable fo consequential o incidental damage aising fom any poduct defect. Euotech s waanty is limited to eplacement o epai and does not cove cost of tanspotation and labo. Thee ae no othe waanties expessed o implied othe than those specifically descibed. Euotech does not waant custome s own mateial. This waanty is made as of 9/5/6. Please see fo any updates and/o evisions to this waanty.
OPERATING INSTRUCTIONS WARRANTY CUSTOMER SERVICE
ASSEMBLY INSTRUCTIONS OPERATING INSTRUCTIONS WARRANTY CUSTOMER SERVICE -800-637-0005 WWW.EUROTECHSEATING.COM ASSEMBLY INSTRUCTIONS CHAIR NAME AND SKU OR MODEL Remove all items fom the caton. Veify all
More informationPart List ASSEMBLY INSTRUCTIONS. Backrest. Seat. Armrests. Star Base. Caster. Arm Bolts (M8 X 22mm) Back Bolts (M8 X 15mm) Allen Wrench
IOO-BLK/IOO-WHT ASSEMBLY INSTRUCTIONS IOO-BLK/IOO-WHT Part List Key Description Part Qty. Spare A Backrest B Seat C Armrests ( left & right armrest) 2 D Seat Post(Cylinder) E Star Base F Caster r 5 G H
More informationINSTALLATION INSTRUCTIONS
R 1 2 5 3 4 HEPFU TOOS Impact Socket Sizes: 30mm, 3/4, 5/16, 9/16 and 1-1/8 15/16 Deep Well Socket 5/16 Dive Wench Sizes: 1-1/8, 15,16, 3/4 and 9/16 Anti-seize WD-40 Pipe Thead Sealant White Thead Sealing
More informationOperator Manual. Zero Turn Mower /
Opeato Manual P-ZT 54 Zeo Tun Mowe / 966613403-02 Please ead the opeato manual caefully and make sue you undestand the instuctions befoe using the machine. EN Gasoline containing up to 10% ethanol (E10)
More informationOperator Manual. Zero Turn Mower /
Opeato Manual MZ 61 Zeo Tun Mowe / 967277501-01 Please ead the opeato manual caefully and make sue you undestand the instuctions befoe using the machine. Gasoline containing up to 10% ethanol (E10) is
More informationOperator Manual RZ19 CE / English
Opeato Manual RZ19 CE / 966658901 Please ead the opeato s manual caefully and make sue you undestand the instuctions befoe using the machine. English In ode to implement impovements, specifications and
More informationOperator Manual Zero Turn Mower / Z 242F
Opeato Manual Zeo Tun Mowe / Z 242F 967 602802-00 Please ead the opeato manual caefully and make sue you undestand the instuctions befoe using the machine. Gasoline containing up to 10% ethanol (E10) is
More informationCLEAN FITTING (C SERIES / CL SERIES)
N ITTING ( SIS / SIS) pplication - lean ai, Pue wate, Medicinal fluid fo piping eatue - ll of the pats ae washed, assembled and packed in a clean oom and completely oil-fee poducts which did not use any
More informationModel 1920FR Drinking Fountain
INSTALLATION, OPEATION & MAINTENANCE INSTUCTIONS 1455 Kleppe Lane Sparks, NV 8941-6467 (775) 59-4712 Fax (775) 59-7424 E-mail: haws@hawsco.com website: www.hawsco.com Model 1920F Drinking Fountain No.
More informationCAUTION: Do not install damaged parts!!!
Yu satisfactin is impta t us, please let us help! If yu have any questins cncens duing the installatin, u suppt epeseatives ae available t assist yu. Please call: 1-877-769-3765 Live Chat at www.aptseies.cm
More informationAngles Hot rolled, weldable structural steel sections
Data sheet: E3.1 Angles Hot olled, weldable stuctual steel sections Geneal desciption AceloMittal Steel South Afica, Newcastle Steel poduces an extensive ange of stuctual steel angles. Non-standad sizes
More information2-3 COMPANY ROTORA: 2008 BRAKE GUIDE CIRCUIT BRAKER
2008 BAKE GUIDE 2-3 COMPANY FOUNDED IN 1999, OTOA IS A MAJO AFTEMAKET MANUFACTUE OF HIGH PEFOMANCE BAKING SYSTEMS AND COMPONENTS INCLUDING ACING CALIPES, BAKE DISCS, STAINLESS STEEL BAIDED BAKE HOSES AND
More informationTriple-Sealed Bearings for Bearing Units
Fo New Technology Netwok copoation R Tiple-Sealed eaings fo eaing Units NTN Tiple-Sealed eaings fo eaing Units These eliable tiple-sealed beaings ae dustpoof and watepoof. They ensue a longe beaing life
More informationCylindrical Roller Bearings
ylindical olle eas ontents Seies M1000, 1200, 1300, 1900, 5200, 5300, 7300 Intoduction... G-1 Pictoial Index... G-3 Selection... G-5 atings... G-7 Dimensions... G-15 Shaft Dimensions... G-25 Housing Dimensions...
More informationLZR TIMING BELT DRIVEN LINEAR MOTION MODULE
Technical Documentation LZ TIMING BELT DIVEN LINEA MOTION MODULE Each serial number is unique to that specific linear motion module and provides mk North America with complete order details. Your serial
More informationCAUTION: Do not install damaged parts!!!
Yu satisfactin is impta t us, please let us help! If yu have any questins cncens duing the installatin, u suppt epeseatives ae available t assist yu. Please call: 1-877-769-3765 Live Chat at www.aptseies.cm
More informationSECTION 32 - PAD-MOUNTED CAPACITORS TABLE OF CONTENTS
. PAD-MOUNTED CAPACITOS PAD-MOUNTED CAPACITO PAD-MOUNTED CAPACITO.-A.-B. PAD-MOUNTED CAPACITO OPEATIONS PAD-MOUNTED CAPACITOS ENEGIZING PAD-MOUNTED CAPACITO DE-ENEGIZING PAD-MOUNTED CAPACITO PAD-MOUNTED
More informationDrum Line. Technique Packet. Contents
01 Dum Line Technique Packet Contents Geneal Infomation Impotant Dates Clinic Days Additional Music equiements Expectations Positions in the Dum Line Technique Snae uads Cymbals Music s asic Stokes 5--9
More informationC.qrk 9/28/00 7:01 AM Page 1. NB Spray Guns. Owner s Manual Form No C 1999 Wagner Corporation-All rights reserved
0276712C.qrk 9/28/00 7:01 AM Page 1 NB Spray Guns Owner s Manual 0900 Form No. 0276712C 1999 Wagner Corporation-All rights reserved 0276712C.qrk 9/28/00 7:01 AM Page 2 EXPLOSION HAZAD - Incompatible materials.
More informationOPERATOR S MANUAL HWH SYSTEMS CONTROL MODULE FEATURING:
HWH COPOATION OPEATO S MANUAL HWH SYSTEMS CONTOL MODULE FEATUING: BI-AXIS Computerized Hydraulic Leveling Multiple ooms Hydraulic Step and Step Cover Dual Direction Hydraulic Storage Slide Out Auxiliary
More informationSustainable Transport: Synergies from a multibrand company. Pierre Lahutte, Iveco Brand President
Sustainable Tanspot: Synegies fom a multiband company Piee Lahutte, Iveco Band Pesident CNH Industial Company Stuctue & Agicultual Equipment Constuction Equipment Commecial Vehicles Powetain Financial
More informationSplit spherical roller bearings. Costs savings through rapid bearing replacement at difficult to access bearing locations
Split spheical olle beaings Costs savings though apid beaing eplacement at difficult to access beaing locations Contents Rapid beaing eplacement 2 Cost savings 2 Application examples 2 Replacement fo beaings
More informationEaton EMEA Core Hydraulic Hose Products Brochure. Success made simple. The new standard for hydraulic hose and fittings.
Eaton EMEA Coe Hydaulic Hose Poducts Bochue Success made simple. The new standad fo hydaulic hose and fittings. Sometimes less is moe. Fewe poducts, smate choices. Eaton is taking a new appoach to helping
More informationQuality from the Cutting Edge of Fabrication
Quality from the Cutting Edge of Fabrication TABLE OF CONTENTS COMBINATION OF DIES & PUNCHES PUNCH HOLDES - - - - - - - - - - - - - - - - - - - - - - - - - - 3 PUNCHES - - - - - - - - - - - - - - - - -
More informationINSTALLING 200 AMP PRIMARY SPLICES: LC SHIELDED CABLE TO LC SHIELDED CABLE INSTALLING 200 AMP PRIMARY SPLICES: LC SHIELDED CABLE TO LC SHIELDED CABLE
6. PEPAING CABLE FO TEMINATION AND SPLICING PEPAING CABLE FO TEMINATION AND SPLICING CETIFICATION EQUIEMENTS TO INSTALL BULK FEEDE SPLICES, TEMINATOS AND ELBOWS 6.- 6.- 6. PIMAY SPLICES 5 & 75 SPLICES
More informationTungsten carbide burrs with STEEL cut High-capacity burrs for steel and cast steel
Tungsten cabide bus with cut High-capacity bus fo steel and cast steel Up to 50 % highe stock emoval pefomance when used on steel and cast steel in compaison to conventional coss cut bus Significantly
More informationSafety detection solutions Safety interlock switches by actuator, with solenoid, turret head Metal, type XCS LF Plastic, type XCS LE
Pesentation by actuato, with solenoid, tuet head opeating by actuato With emegency elease mushoom head pushbutton Pages / and / Pages /6 and / opeating by actuato Pages / and / Envionment chaacteistics
More informationINSTALLATION ADJUSTMENT SERVICE HIGH-LOW MANIFOLD SYSTEMS TM , 8015, 12520, PRV
LEO NAD 17 VAL VE ts.97,77 & 3,1,195 3.15,7 CO. kg/cm p s i TYPE TM 1 1 1 AN 1 1 1.I. STON pkg/cm s i 1 1 1 1 17-3 C F 5 1 17 VAL VE TYPE TM ts.97,77 & 3,1,195 3.15,7 C O. kg/cm psi 1 1 1 AN 1 1 STON.I.
More informationTWIN-SAF SYSTEM TURNING / PARTING & GROOVING / PROGRAM OVERVIEW PARTING TN-P00 GROOVING TN-P00 TURNING TN-P00 PROFILING TN-F00 TN-F90 FACE GROOVING
/ PARTING & GROOVING / PROGRAM OVERVIE TIN-SAF SYSTEM PARTING TN-P00 TN-B02 48 380 Shank... p 172 Blade... p 176 Blade holde. p 177 p 169 p 171 GROOVING TN-P00 28 38 48 88 380 Shank... p 172 p 168 p 168
More informationCHEMICAL. TIE PLUGGER Model NETP-1 TABLE OF CONTENTS
TABL OF CONTNTS Chemical Meteing quipment...2 Resin and ISO Chemicals...3 Dispensing Valve and Gun Assembly...4 Bleeding Ai Pessue fom Cylindes...5 Heat Contolles...6 NOT: Do NOT attempt to epai heat contolles.
More information27.00 PAD-MOUNTED TRANSFORMERS- GENERAL UNDERGROUND DISTRIBUTION SPECIFICATIONS SPCC (SPILL PREVENTION, CONTROL & COUNTERMEASURES) PLAN
7. PAD-MOUNTED TANSFOMES- GENEAL UNDEGOUND DISTIBUTION SPECIFICATIONS 7.- UNDEGOUND DISTIBUTION SPECIFICATIONS 7.- LOCATION OF WANING AND DANGE LABELS FO PAD-MOUNTED TANSFOMES (VENDO APPLIED) 7.-4 LOCATION
More informationRubber Insulating Products, Safety Equipment & Dielectric Testing Services
Rubbe Insulating Poducts, Safety Equipment & Dielectic Testing Sevices Fo Electic Utilities, Contactos, Telecom, Cable Povides and Geneal Industy VOLTGaRD TEST Lab ChaNGE-OuT PROGRam Saf-T-GaRD INTERNaTIONaL
More informationGESTRA Product Overview. The optimum components for every application
GESTRA Poduct Oveview The optimum components fo evey application Steam Taps Non-Retun-Valves BK Range Steam taps with egulato of DUO stainless steel up to PN 630. BK taps ae suited to the toughest opeating
More informationINSTALLING 200 AMP PRIMARY SPLICES: LC SHIELDED CABLE TO LC SHIELDED CABLE INSTALLING 200 AMP PRIMARY SPLICES: LC SHIELDED CABLE TO LC SHIELDED CABLE
6. PEPAING CABLE FO TEMINATION AND SPLICING PEPAING PIMAY CABLE FO TEMINATION AND SPLICING 6.- 6. PIMAY SPLICES 5 & SPLICES (LC TO LC) ALL VOLTAGES 6.-A 5, 5, 75 & SPLICES (LC TO LC) ALL VOLTAGES 6.-B
More informationmodel H with1920
model with1920 ADA Compliant Chilled Dual Wall-Mount Fountain and Bottle Filler FEATUES & BENEFITS CONSTUCTION 18-gauge Type 304 stainless steel swirl design bowl, 14-gauge Type 304 stainless steel bracket,
More informationCONTROL POWER OFF ON ALARM SILENCE / TEST NEMA 4X 304 STAINLESS STEEL ENCLOSURE W/ OUTER DOOR LAYOUT CUSTOMER JOB NAME PRODUCT O:
PUMP HOU METE PUMP HOU METE 3 4 5 3 4 5 MAIN POWE EMEGENCY POWE ON ON PUMP UN PUMP UN OFF OFF G G PUMP HAND-OFF-AU PUMP HAND-OFF-AU CONTOL POWE OFF ON w 00 AMP GENEA ECEPTACLE PUMP OVELOAD TIP PUMP OVELOAD
More informationSpherical Roller Bearings. NSKHPS, redefining the standard.
Spheical Rolle Beaings NSKHPS, edefining the standad. Continually developing poducts with geate stength and highe accuacy, NSK s new NSKHPS fully incopoate the advantages of NSK s woldclass design, mateials,
More informationEaton Aeroquip Triple Crown
Eaton Aeoquip Bette in evey way that mattes Tempeatue Abasion Resistance Eaton engineeing does it again. Select Aeoquip hydaulic hoses, including new MatchMate Global hoses, offe distinct advantages in
More informationUp to 100 % higher stock removal performance when used on stainless steel (INOX) in comparison to conventional cross cut burrs
Tungsten cabide bus with cut High-capacity bus fo use on stainless steel () INNOVATION cut Up to 100 % highe stock emoval pefomance when used on stainless steel () in compaison to conventional coss cut
More informationNOS. 497A, 497B, AND D TOOLS (PORTABLE PLUG CLEANING MACHINES) PIECE-PART DATA AND REPLACEMENT PROCEDURES
BELL SYSTEM PRACTICES PlantSeies SECTION 075-125-801 issue2, Octobe,1954 AT&TCo Standad NOS. 497A, 497B, AND D-1 59798 TOOLS (PORTABLE PLUG CLEANING MACHINES) PIECE-PART DATA AND REPLACEMENT PROCEDURES
More informationTungsten carbide burrs with ALU cut High-capacity burrs for aluminium
Tungsten cabide bus with cut High-capacity bus fo aluminium Vey boad and compehensive ange, including miniatue bus fo delicate applications Extemely high stock emoval pefomance, long tool life and smooth
More informationOrbital Pump Bottle Jacks Instruction Manual
MODELS: J10124-M0 rev 08/07 Orbital Pump Bottle Jacks Instruction Manual J10124, J10126-12 Ton Capacity J10204, J10206-20 Ton Capacity SFA Companies 10939 N. Pomona Ave. Kansas City, MO 64153 Tel: 888-332-6419
More informationAMENDMENTS TO CLUTCH CATALOGUE IN MONTH OF FEBRUARY 17
AMENDMENTS TO CLUTCH CATALOGUE IN MONTH OF FEBUAY 17 S NO GOUP SUBGOUP DIAGAM NO PAGE NO IN CAT. S NO IN CAT. DESCIPTION DATE OF UPDATE EVISION - - - - - - - - - CLUTCH ASSLY (430 & 395 DIA) Diagram No.
More informationOWNERS MANUAL HOIST CL2061. March 2000
OWNES MANUAL CL2061 Note: Both Serial Number and Model Number are equired when Ordering Parts Customer Service (800) 548-5438 (619) 578-7676 ECOD SEIAL NUMBE HEE Fax (619) 578-9558 March 2000 I N S T U
More informationOperator s Manual. Hotronix Cap Heat Transfer Equipment
by Operator s Manual Hotronix Cap Heat Transfer Equipment Manufactured by Masontown, Pennsylvania TABLE OF CONTENTS HOTONIX CAP PATS LOCATION GUIDE... 3 OPEATING INSTUCTIONS... 4-11 HOTONIX CAP ELECTICAL
More informationOWNER'S / OPERATOR'S MANUAL
Woodbine, Iowa Made in America OWNE'S / OPEATO'S MANUAL Safety Information Warranty Information Operator's Instructions Maintenance Instructions Parts List r ve SEIES 750-1600 LB CAPACITY! Before installing
More informationPhysics 132 Quiz # 17
Name (please (please pint) pint) Physics 132 Quiz # 17 1. 1. The The magnitude of of the the magnetic field field due due to to the the pesence of of a chaged body body A) A) vaies diectly with with the
More informationOperating Instructions High-pressure pumps
MAXIMATOR HIGH PRESSURE TECHNOLOGY HYDRAULICS PNEUMATICS TESTING EQUIPMENT Opeating Instuctions High-pessue pumps issue 08.2007 MAXIMATOR GmbH Walkeniede Staße 15 D-37449 Zoge Gemany Telefon 0 55 86 /
More informationFRICTION POTENTIAL AND SAFETY : PREDICTION OF
BRITE EURAM PROJECT BRPR CT97 0461 FRICTION POTENTIAL AND SAFETY : PREDICTION OF HANDLING BEHAVIOR FLORENCE, FEBRUARY 23 d 2001 Title : Guide Lines fo vehicle design Authos: P.I. Umbeto Delcao, CRF D.Ing.
More informationSUMMARY INFORMATION. MCC 12.0 RLA 8.6 LRA-Low * LRA-High 45.0 LRA-Half Winding * Med Volts 380 High Volts 420 Phase 3 Frequency 50 RPM *
SUMMAY INFOMATION CM3-0400-TFD Application: Air Conditioning efrigerant: -22 Copelaweld 50 Hz Production Status: Available for sale to all U.S. customers. Please check with your local Copeland representative
More informationINSTALLATION INSTRUCTIONS
4112 TM ead installation instructions in its entirety before installing your Coil-ite Kit SWAY BA LINKAGE LOCATED FOWAD OF THE AXLE MOUNTED TO THE OUTSIDE OF THE FAME AIL EMOVE BOLT ALLOWING SWAY BA TO
More informationFull complement cylindrical roller bearings
Full complement cylindical olle beaings INTERPRECISE Donath GmbH Osting 2 90587 Obemichelbach Gemany Phone +49-911-76630-0 Fax +49-911-76630-30 info@intepecise.de www.idc-beaings.com Full complement cylindical
More informationSAF-CUT SYSTEM TURNING / PARTING & GROOVING / PROGRAM OVERVIEW PARTING GROOVING TURNING
/ PARTING & GROOVING / PROGRAM OVERVIE SAF-CUT SYSTEM PARTING 151.20 151.2 N2 N3 N4 N5 Sank... p 184 Blade... p 189 Blade olde. p 190 p 180 p 180 p 181 p 181 GROOVING 151.22 151.23 N2 N3 N4 N5 G4 Sank...
More informationSTAGE MANAGEMENT PRODUCTS - CHOIR STICK MICS
STAGE MANAGEMENT PRODUCTS - CHOIR STICK MICS #CSM- AND #CSM- CHOIR STICK MICROPHONES The CSM- and CSM- Choi Stick Micophones Stick micophone mounts on any standad mi- offe the ultimate pefomance of an
More informationBig & Tall Chair Assembly Instructions
Big & Tall Chair Assembly Instructions Model 48951-A / 48951-B LA-Z-BOY is a trademark of La-Z-Boy Incorporated and is used under license to L Products Pte Ltd. 400 lbs PARTS A B C D1 D D2 Casters Quantity:
More informationStrong Key Derivation from Biometrics
Stong Key Deivation fom Biometics Benjamin Fulle, Boston Univesity/MIT Lincoln Laboatoy Pivacy Enhancing Technologies fo Biometics, Haifa Januay 15, 2015 Based on thee woks: Computational Fuzzy Extactos
More informationSCORBOT -ER 4pC User's Manual. Catalog # Rev.A
SCORBOT ER 4pC Use's Manual Catalog #100118 Rev.A ESIIEI:=> RO.aO.EC: Copyight @ 1999 by Eshed Robotec (1982) Limited. (Febuay 1997) Febuay 1999 Repint/PDF vesion Catalog #100118 Rev.A Evey effot has been
More informationEquipment: Cow magnet and long copper tube and long aluminum tube, or cow magnet slug
Mon., 3/30 Tues., 3/31 We., 4/1 Thus., 4/2 Fi., 4/3 22.3-4,.7 Faaay & Emf & Inuctance 22.8-9,.6 Enegy, Diff. fom, Supeconuctos Quiz Ch 22, Lab 10 Faaay s Law 23.1,2,7 Ampee- Maxwell, E&M Pulse RE27 HW21:RQ.12,
More informationLimit Switches Matsushita Electric Works, Ltd. Matsushita Electric Works, Ltd. Limit Switches ARCT1B272E Please contact...
06 07 06 07 Please contact... ARCT1B272E 200609-1YT These mateials ae pinted on ECF pulp. These mateials ae pinted with eath-fiendly vegetable-based (soybean oil) ink. Specifications ae subject to change
More informationmodel SP158.8 FEATURES & BENEFITS OPTIONS SPECIFICATIONS APPLICATIONS Freeze Valve For more information, visit or call (888)
model SP58.8 Freeze Valve FEATUES & BENEFITS OPTIONS For more information, visit www.hawsco.com or call (888) 640-4297. SPEIFIATIONS Model SP58.8, retro-fit freeze valve kit to replace the stainless steel
More informationArtisan Scientific is You~ Source for: Quality New and Certified-Used/Pre:-awned ECJuiflment
Looking fo moe infomation? Visit us on the we at http://www.atisan-scientific.com fo moe infomation: Pice Quotations Dives Technical Specifications. Manuals and Documentation Atisan Scientific is You~
More informationsquareworx For every eventuality: Square shoulder, slotting and chamfering milling with only one insert
squaewox Fo evey eventuality: Squae shoulde, slotting and chamfeing milling with only one inset squaewox M squae shoulde, slotting and chamfeing milling cutte bodies milling cutte bodies One fo two: Squae
More informationINVERTER GENERATOR PARALLEL KIT OWNER S MANUAL MODEL NUMBER
OWNE S MANUAL INVETE GENEATO PAALLEL KIT MODEL NUMBE 100319 SAVE THESE INSTUCTIONS Important safety instructions are included in this manual. MADE IN CHINA EV 100319-20180903 12039 Smith Ave. Santa Fe
More informationF.A.S.T. Anchoring System
F.A.S.T. Anchoring System Owners Manual 1999 Chief Automotive Systems, Inc. F.A.S.T. ANCHOING SYSTEM OWNES MANUAL CHIEF S LIMITED ONE-YEA WAANTY & LIABILITY Chief Automotive Systems, Inc. warrants for
More informationRevised 9/05. Model X-5000 Subassembly Parts List
evised /0 Model X-000 Subassembly Parts List -- " DEPTH-OF-CUT PAVIN SA -- Hp, V-Twin KOHLE MOTO -- DUAL HIH OUTPUT PIVOTIN HALOEN HEADLIHTS -- LEVE OPEATED DIECT EA DIVE ITH POPOTIONAL CONTOL -- CENTALLY
More informationQUICK REFERENCE LEVELING SYSTEM IDENTIFICATION MOTORIZED VEHICLES MANUAL LEVER CONTROLLED LEVELING SYSTEMS
COPOATI COPOATI COPOATI COPOATI COPOATI COPOATI u s f e e f u s s u e f QUICK EFEENCE ING SYSTEM IDENTIFICATI MOTOIZED VEHICLES MANUAL LEVE CTOLLED ING SYSTEMS 100 SEIES - Single lever control for each
More informationQ TABLE PREVIOUS PAGE F OF CONTENTS NEXT PAGE
TABLE F OF CONTENTS FINDEX A-Z TABLE F OF CONTENTS F TABLE OF CONTENTS INDEX A-Z PEFIX TABLE OF CONTENTS......................... - GENEAL INFOMATION....................... 8 TEMS........................................
More informationTechnical features. Precision combined bearings
PRECISION COMINED EARINGS, WITH ADJUSTALE AXIAL PRELOAD Technical featues Pecision combined beaings Types AXN and ARN combined beaings and thei deivatives consist of a adial needle beaing with cage, in
More information43ST-ACC. Part number list on following page. Step Top Model - Wood Stove 12/18
Step Top Model - Wood Stove 1 3 2 4 15 14 5 13 6 7 9 10 8 Part number list on following page. 11 12 12/18 IMPOTANT: THIS IS DATED INFOMATION. Parts must be ordered from a dealer or distributor. Hearth
More informationSpherical Roller Bearings
1. Types, constuction an chacteistics Spheical olle beaings consist of an oute ing having a continuous spheical ceway within which opetes two ows of bael-shape olles which ae in tun guie by an inne ing
More informationIMECE ROBOTIC HIGHWAY SAFETY MARKERS
Poceedings of IMECE2002 ASME Intenational Mechanical Engineeing Congess & Exposition Novembe 17 22, 2002, New Oleans, Louisiana IMECE2002-32479 ROBOTIC HIGHWAY SAFETY MARKERS Shane M. Faito Assistant Pofesso
More informationRCP2/RCA/RCS2/RCS3 Actuator Slider Type/Rod Type/ Arm Type/Flat Type First Step Guide Eighth Edition
RCP2///RCS3 Actuato Type/ Type/ Am Type/Flat Type Fist Step Guide Eighth Edition Thank you fo puchasing ou poduct. Make sue to ead the Safety Guide and detailed Instuction Manual (CD/DVD) included with
More informationSteering Control of Six-wheeled Vehicles using LQR Techniques
Steeing Contol of Six-wheeled Vehicles using LQR Techniques Bo-Chiuan Chen, Cheng-Chi Yu, and Wei-Feng Hsu 3 Depatment of Vehicle Engineeing National Taipei Univesity of Technology Taipei 68, TAIWAN ABSTRACT
More informationMAE 412 Machines and Mechanisms 2: Catapult Project 12/13/02
MAE 1 Machines and Mechanisms : Catapult Poject 1/1/0 Michael Kuczewski Nicholas Laatta Jonathan Leahy Nicholas Leone Kuan Kiong Lim William Louisos Atuo Machuca Jeemy Malik Intoduction: The goup s task
More informationInstallation Instructions HOSS Hardtop Organized Storage System
Installation Instructions HOSS Hardtop Organized Storage System Application: 2007 - Current Jeep Wrangler, Wrangler Unlimited 2 and 4 Door Hard Top and Doors Storage System Part Number: 42805 www.bestop.com
More informationSplit spherical roller bearings. Costs savings through rapid bearing replacement at difficult to access bearing locations
Split spheical olle beaings osts savings though api beaing eplacement at ifficult to access beaing locations Application examples Application examples in the pulp an pape inusty: Fans an ventilatos Mixing
More informationTechnical features. Precision combined bearings
PRECISION COMINED EARINGS, WITH ADJUSTALE AXIAL PRELOAD Polígono Indutial O Rebullón s/n. 36416 - Mos - España - odavigo@odavigo.com Technical featues Pecision combined beaings Types AXN and ARN combined
More informationStraw Blower SB Parts Manual. Straw Blower
Straw Blower Parts Manual SB 4000 7/2014 2/2014 Table of Contents PATS SECTION Table of Contents Main Frame Assembly... Trailer Assembly... Blower Liner... Floor Chain Assembly... Conveyor Chain Assembly...
More informationDeep Groove Ball Bearings
Deep Goove all eaings Open type Shielded type Sealed type (non-contact) Expansion Compensating eaing 1. Design featues and special chaacteistics Deep goove ball beaings ae vey widely used. A deep goove
More information(PACIFIC BLUE) HUGO ROLLATOR 8 x1.5 WHEELS AND CURVED BACKREST
REV 5.1 HUGO ROLLATOR 8 x1.5 WHEELS AND CURVED BACKREST Update: Dec.10.2014-1 - REV 5.1 HUGO ROLLATOR 8 x1.5 WHEELS AND CURVED BACKREST Update: Dec.10.2014 Item # AMG Part # Item Description 1. B01-206BK
More informationInstructions for adjusting G1 working chairs
Instructions for adjusting G1 working chairs G1 M1 1:1 back/seat movement with independent seat and back angle adjustment Backrest float/lock Seat angle float/lock Recommended adjustment sequence for G1:
More informationTungsten carbide burrs with CAST cut High-capacity burrs for cast iron
Tungsten cabide bus with cut High-capacity bus fo cast ion Up to 100 % highe stock emoval pefomance in compaison to conventional coss cut bus Significantly inceased aggessiveness, lage chips and vey good
More informationPANEL SPLICE SEE DETAIL A1.3 FLOATING TRIM SEE DETAIL A1.7 TRIM NOT SHOWN FOR CLARITY
V-7 CAIE 4" MODULE OPTIONAL FLUSH CLOSUE OPTIONAL ECESSED CLOSUE 21 32 " 3 11 32 " 1 1 8 " 5 8 " 1 29 32 " 12 GA HANGE WIE, BY OTHES, NOT BY HUNTE DOUGLAS SEE DETAIL A1.2 TYPICAL SECTION SUSPENSION EQUIEMENTS
More informationOperation. Service. Manual. Round Bale Loader & Feeder
Operation & Service Manual ound Bale Loader & Feeder 9/ 3/ Thank you for purchasing a DewEze Bale Loader. TO THE OWNE O OPEATO: Thank you for purchasing a DewEze Bale Loader. We hope it provides you with
More informationThe contents of this catalogue are the copyright of ESE and may not be reproduced unless permission is granted.
Copyight ESE 2018 The contents of this catalogue ae the copyight of ESE and may not be epoduced unless pemission is ganted. Caes have been taken in evey aspect to ensue the coectness of the data contained
More informationSolutions for a wide variety of applications
Aeoquip Hose Assembly Maste Catalog Solutions fo a wide vaiety of applications Tanspotation Synflex coils, ai bake and diesel fuel tubing 15CA Eclipse... -5 3SCE Eclipse... -5 4245 Eclipse... -6 4247
More informationDTC P1780 PARK/NEUTRAL POSITION SWITCH MALFUNCTION
0540 DIAGNOSTICS ELECTONIC CONTOLLED AUTOMATIC TANSAXLE [ECT] (A46E) DTC P780 PAK/NEUTAL POSITION SITCH MALFUNCTION 057XT0 PAK/NEUTAL POSITION SITCH CICUIT CICUIT DESCIPTION The park/neutral position switch
More informationPOWERHOUSE CORNER GYM GS 9
NOTE: Please read all instructions carefully before using this product Table of Contents Safety Notice Hardware Pack Assembly Instruction Parts List POWERHOUSE CORNER GYM GS 9 Resistance Chart Warranty
More informationCERAMIC INSERTS For Turning, Grooving and Milling
SPK Cutting Tools VEHICLES AEROSPACE GEARS & BEARINGS ENGINEERING WIND ENERGY DISCOVER A MULTITUDE OF SOLUTIONS CERAMIC INSERTS Fo Tuning, Gooving and Milling DISCOVER A MULTITUDE OF SOLUTIONS AEROSPACE
More informationBreezy Ultra 4 Supplier:
Breezy Ultra 4 Supplier: User: This manual must be given to the user of this wheelchair. Before using this wheelchair read this entire manual and save for future reference. O w n e r s M a n u a l I. INTODUCTION
More informationTHE TCCS SYSTEM UTILIZES A MICROCOMPUTER AND MAINTAINS OVERALL CONTROL OF THE E/G, T/M, ETC. AN OUTLINE OF ENGINE CONTROL IS GIVEN HERE.
SSTEM OUTLINE THE TCCS SSTEM UTILIZES A MICOCOMPUTE AND MAINTAINS OVEALL CONTOL OF THE E/G, T/M, ETC. AN OUTLINE OF ENGINE CONTOL IS GIVEN HEE.. INPUT SIGNALS () ATE TEMP. SIGNAL SSTEM THE ATE TEMP. SENSO
More informationSingle Row Deep Groove Ball Bearings
Single Row eep Goove all eaings Single Row eep Goove all eaings The single ow eep goove ball beaings have elatively eep aceways on both ings without a filling slot an ae non-sepaable. High loa atings ae
More informationPrecision Rolling Bearings
R Pecision Rolling Beaings CAT. No. 226-^/E C O N T E N T S Technical Data NTN PRECISION ROLLING BEARINGS Main Spindle Beaings Ball Scew Suppot Beaings NTN PRODUCTS APPENDIX 1. Classification of Pecision
More informationSimulink Modeling for Hybrid Vehicle Dynamic Characteristics
EVS28 KINTEX, Koea, May 3-6, 215 Simulink Modeling fo Hybid Vehicle Dynamic Chaacteistics Dae-Kee Kim 1, Dong-Min Kim 1, Seung-Hee Chai 1, Jung-Pyo Hong 1, Senio Membe, IEEE 1 Deatment of Automotive Engineeing,
More informationHEPRO Work Chairs HEPRO AS. General information. Materials and components
HEPRO Work Chairs HEPRO Work Chairs HEPRO AS The HEPRO work chairs are developed and manufactured in Norway and are made of high quality materials, with the aim to create a secure solution for everyone.
More informationDNFTR DIGITAL NO-FLOW TIMER U.S. PAT. NO. 5,835,372
MODEL PG-PS C -SWITCH GN-GND. VIO - OPEN - N.O. VIO - SHOT - N.C. -PG-PS MONITOS MOVEMENT OF DIVIDE VALVE PISTON FO DEPENDABLE "TIMED" SHUTDOWN POTECTION CLOSED LOOP O OPEN LOOP OPEATION INSTALLS DIECTLY
More informationQuality from The Cutting Edge of Fabrication
Quality from The Cutting Edge of Fabrication TABLE OF CONTENTS PUNCH HOLDES - - - - - - - - - - - - - - - - - - - - - - - - - - 3 PUNCHES - - - - - - - - - - - - - - - - - - - - - - - - - - 4 DIES - -
More informationAcceptance & Submission Guidelines Model Cars
f o Acceptace & Submissio Guidelies Model Cas Model Cas Pemium Posiig We wat to assue potetial buyes that we shae thei passio ad have the quality of thei collecs i mid. At Catawiki we auc model cas ad
More informationARIEL PN A SPECIFICATIONS RATINGS
C US -PG-PS AIEL Corporation 35 Blackjack d. AIEL # MT. VENON, OHIO ATED -SWITCH GN-GND YEL-POX. SWI. VIO - OPEN - N.O. PG-PS SEIAL # AIEL PN ALAM POGAMMABLE VIO - SHOT - N.C. SPECIFICATIONS 523LIT -1
More informationSEATING INSTRUCTIONS. Trooper
Trooper Trooper Asynchronous Control 6 8 2 Seat Depth 9 Arm Width 5 Tilt Tension 7 Back Angle Forward Tilt 1 Seat Angle 1. Enables the seat to adjust to the preferred height. To raise the seat, lift your
More information