bollard ordering information bol * mm

Transcription

1 bollr bol OL ESRIPTIoN General Freestanding mount for use with Stealth or Impact Special Features Receives fitting for flush installation Mounting ollard secured to base with supplied screws; specify base for bolt-down, stake-down, or j-bolt concrete pour (see page 2) 3 76mm fixture centerline Fitting Torsion spring clips retain fitting at optimum 18 (457mm) above walking surface; recommended 36 (914mm) on-center when using multiple ollards onstruction ollard body is extruded aluminum with stainless steel internals; consult factory for availability of custom ollard body extrusion dimensions *Standard ollard height is (537mm); consult factory for custom heights; minimum height for remote powered ollard is 9 (229mm); minimum height for integral powered ollard is 1 (356mm) * mm Electrical ollard may be specified for use with remote power supply (OL-REM) or to include integral power supply (for ollard use with ISL-LE or SSL-LE) or power supply (for ollard use with SSL-LE) OL-INT-T includes integral 120V primary, 12V secondary, 3.5W dimmable torroidal transformer OL-INT-E includes integral 120V primary, 12V secondary, 60W dimmable conventional electronic transformer OL-INT- includes integral, non-dimmable 120V-240V primary, 350m (1W) secondary LE driver 3 76mm 3 76mm Listing ollard, Stealth and Impact are ETL listed for dry/damp and wet locations; E marked; IP65 rated; ark-sky approved ordering information Example: OL-REM-- OL * SERIES power supply FINISH base type (see page 2) USTOM HEIGHT OL REM INT-T INT-E INT- Remote Integral 3.5W torroidal transformer Integral 60W electronic transformer Integral 350m (1W) power supply W MG R White Powdercoat lack Powdercoat Metallic Gray Powdercoat rchitectural ronze Powdercoat S P olt-down (fasteners not included) Stake-down J-bolt for concrete pour If specifying custom height, include (in inches) at end of model number; Example: OL-REM---36 Minimum height for remote powered ollard is 9 (229mm); minimum height for integral powered ollard is 1 (356mm) page Lucifer Lighting ompany s part of its policy of continuous research and product San ntonio, Texas [FX]

2 base types OL (TEMPLTE IS TO SLE) Upon final mounting to base, ollard may be oriented in 90 increments. onfirm one side of template meets desired alignment to lighting surface ensuring final ollard orientation. (onfirm template meets stated dimensions before use.) OLT-OWN ase is bolted directly onto mounting surface, then accepts ollard. Ø mm Ø.88 22mm mm stake-down ase is staked into the mounting surface, then accepts ollard. concrete pour ase features integral zinc-plated J-bolts for secure concrete pour mounting, then accepts ollard. Stainless steel J-bolts available upon request for additional fee mm OLT-OWN STKE-OWN J-OLT ONRETE POUR mm page Lucifer Lighting ompany s part of its policy of continuous research and product San ntonio, Texas [FX]

3 fittings OL General (Stealth) Regressed LE with slot aperture for energy efficient path, step and accent lighting Impact 1.58" 40mm General (Impact) Regressed LE with rectangular aperture for energy efficient path, step and accent lighting Special Features Fittings are ark-sky approved. immable 3W LE (dimming by hardwire electronic power supply PS H, see pg.4); LE/heat sink module is replaceable; LE average rated life is 50,000 hours immable 1W LE available in Stealth only (dimming by hardwire electronic power supply PS-LE H-IM, see pg.5); LE/heat sink module is replaceable; LE average rated life is 50,000 hours; alternate LE colors may be substituted, consult factory for options (SSL-LE only) Effects evices Provided with sealed spread lens (linear spread on Stealth); consult factory for availability of color gels which may achieve custom color temperatures Retention Torsion spring clips secure fixture into back box, mounting plate or appropriately sized cut-out; additional set screws included with locking version 1.70" 4.94" stealth 1.60" 41mm stealth 1.60" 41mm Lumen/Watt ( Fittings) Stealth 3000 K 9.3 lm/watt Impact 3000 K 13.8 lm/watt onstruction Fittings are cast 316 stainless steel or bronze depending on finish Patents Stealth: Patent No. US 610,734 S Impact: Patent No. US 606,228 S.94" ordering information (fitting) Example: ISL-LE-3K--NL SERIES OLOR TEMP FINISH LOKING SSL-LE ISL-LE SSL-LE Stealth Impact Stealth 3K K 3K 5K K 3000 K ustom olor (Gel) 3300 K 5400 K ustom olor W IG MG NR SS R R RP RM White Powdercoat lack Powdercoat hrome Industrial Gray Metallic Gray Powdercoat Natural ronze rushed Stainless Steel rushed ronze rchitectural ronze Powdercoat Polished Oil-Rubbed ronze Plate Matte Oil-Rubbed ronze Plate NL L Non-Locking Locking page Lucifer Lighting ompany s part of its policy of continuous research and product San ntonio, Texas [FX]

4 remote power supply options PS-60-12P Power supply for plug-in applications, lass II 120V primary, 12V secondary, 60W capacity electronic transformer (non dimmable) mm PS-60-12P bol mm psa-60-12h immable power supply for hardwire applications. onsists of a steel compartment with integral conventional lass II 120V primary, 12V secondary, 60W capacity electronic transformer and integral terminal block. 18 luminaires may be wired to any one power supply, with a maximum of 9 per channel ( or ), in either a home run or parallel method. PS-60-12H mm Transformer mm PS- Non-powered distribution box recommended for power management if plug-in power supply is chosen. Steel compartment includes integral terminal block. 18 luminaires may be wired to any one power supply, with a maximum of 9 per channel ( or ), in either a home run or parallel method. PS- 102 mm ordering information (power supply) POWER SUPPLY OPTION PS-60-12P PS-60-12H PS- Plug-in transformer (non dimmable) immable power supply with hardwire transformer istribution box for use with plug-in transformer page Lucifer Lighting ompany s part of its policy of continuous research and product San ntonio, Texas [FX]

5 remote power supply options OL psa-le h Non-dimmable power supply for hardwire applications. onsists of a steel compartment with integral conventional lass II 120V primary, 350m (10W max) secondary LE driver. apable of powering up to 9 luminaires in either a home run or parallel method. PS-led h mm mm PS-LE H-IM immable power supply for hardwire applications. onsists of a steel compartment with integral conventional lass II 120V primary, 350m (10W max) secondary LE driver. apable of powering up to 9 luminaires in either a home run or parallel method. PS-led h-dim mm mm PS- Non-powered distribution box. Steel compartment includes integral terminal block which allows for wiring of up to 9 luminaires in either a home run or parallel method when used in conjunction with a lass II 120V primary, 350m (10W max) secondary LE driver. PS-db 102 mm ordering information (power supply) POWER SUPPLY OPTION PS-LE H PS-LE H-IM PS- Non-dimmable hardwire power supply immable hardwire power supply istribution box for wiring of multiple luminaires page Lucifer Lighting ompany s part of its policy of continuous research and product San ntonio, Texas [FX]