The Tracking Magnet Recessed High-tech LED lighting system for interior architecture

Transcription

1 Description The Tracking Magnet system is creative, flexible, reliable and precise. Accent fixtures can be rapidly exchanged and repositioned without tools using the magic of magnets. A variety of accent LED light elements achieve flexible yet precise illumination with artistic results. The extruded aluminum housing creates a clean 1/2 slot that can be run up, around and across walls and ceilings. The Tracking Magnet is available in recessed, surface, or pendant mounted applications, making it an option in even the most varied of job conditions. Vertical and horizontal corners complete the system. The Tracking Magnet is perfect for retail displays where frequent changes are typical and absolute performance is required. Lamps Spot Tracking Magnet 50: LED 4.2W, 410lm, K, 4.2W, 440lm, K, Spot Tracking Magnet : LED 9.6W, 850lm, K, 9.6W, 0lm, K, Spot Tracking Magnet 120: LED 12.5W, 1060lm, k, 12.5 W, 985lm, K, Anthony Spot Track: LED 17W, 1870lm, K, 17W, 1785lm, K, WALLEE Spot 9W, 0lm, K, 9W, 820lm, K, Light Strip: LED 2.7W, 230lm, K, 5.4W, 460lm, K, 8.1W, 685lm, K, 10.8W, 915lm, K, 13.5W, 1145lm, K, 2.7W, 230lm, K, 5.4W, 460lm, K, 8.1W, 685lm, K, 10.8W, 915lm, K, 13.5W, 1145lm, K, Notes The 120 spot tracking light module is offered with a spot and a flood lens. All available accessories for the spot modules come with the product. Fixture heads all rotate 360 and tilt from nadir. Listings: UL Listed, IP 20 dry rated only, Class 2. Warranty 2 years from date of sale. Photometrics Construction Luminaire and profiles are made of extruded aluminum. Profiles can field cut. Electrical 24V electrical system. Powered by remote listed Class 2 power supply. System is limited to a maximum power current of 4A. After every 96W make a new connection with a connection feed profile. Wattage per linear foot is dependent upon quantity and type of light modules used, total max possible per linear foot is 34W. EC to supply site cabling from driver to track location. Specify one connection cable per driver. Spot modules on board dimming. Not available on Light Strips. Wall switch dimming not available. Recessed Profile Electromechanical track for recessed installation in plasterboard ceilings and walls. Linear tracks available in two versions: power feed profiles for connecting to a driver, and intermediate profiles. Both versions available in lengths from 1m to 2m. Covers included with the power feed profiles. corners available in the same plane (symmetrical element for left and right corners), symmetrical inner and outer corners in different planes. For connection to the driver. Permanent or adjustable fastening kits available (optional). The fastening kits for the roof permit installing without using aluminum fastening profiles. Recommended for installations where the Tracking Magnet cannot be installed before the suspended plasterboard ceiling. For current IES files please visit architectural.flosusa.com Page 1 of 7

2 Luminaries Spot Tracking Magnet 50 Spot Tracking Magnet Spot Tracking Magnet 120 Anthony Spot Track Wallee Light Strip Accent LED spot modules can be rapidly exchanged and repositioned without tools. Light elements are quick to position and connect automatically through the magic of magnets. Built-in dimming knob dims fixture from %. Dimming not available on Light Strips. All available accessories ship with the product. Profiles The extruded aluminum housing creates a clean 1/2 slot that can be run up, around and across walls and ceilings. Vertical and horizontal corners complete the system. The magnetic luminaries are simply installed by insertion. Linear tracks are available in two versions: power feed profiles for connecting to a driver, and intermediate profiles. End caps and connection cables are included with each power feed profile. Internal foam for opening support should not be removed until after installation. 1.1 [27mm] Length Feed Unit Profile Intermediate Profile [41 mm] 39.4 (1m) [16 mm] 59 (1.5m) [15,2 mm] 78.7 (2m) [69 mm] Both profile types can be cut to different lengths in field. Corners Horizontal corners available for turns in the same plane, inside corner to transition from wall to ceiling or from wall to wall and external corners to transition from wall to wall surfaces. Corner can be used for feeding by removing cover plate. No wire provided for feeding. 5.9 [150mm] 3.9 [100mm] 5.9 [150mm] [150mm] [100mm] [150mm] Horizontal Corner Inside Corner Outside Corner Page 2 of 7

3 Ceiling Kits For installation on ACT or wood ceiling. Consult factory for other ceiling types. Fixed Ceiling Kits (2 units) FIXED CEILING KIT [2 PER 500mm] Adjustable Ceiling Kits (2 units) ADJUSTABLE CEILING KIT [2 PER] M6 THREADED ROD (BY OTHERS) 0.6 Drivers LED Driver- 96W Optronic 24V Driver, no dimming wire configuration Splice Box LED96W24V-Non-Dim SP-24V-96W-Non-Dim 13 [347mm] 1.7 [46mm] 2.2 [59mm] End Caps End caps come with feed profiles. These should only be ordered separately if the installation is exclusively composed of intermediate elements A Page 3 of 7

4 Spot Tracking Magnet 50 ø 2.3 [58 mm] 2.0 [50 mm] º 3.1 [78 mm] 5.0 [128 mm] 2.3 [58 mm] 440 4,2 21º ,2 21º Spot Tracking Magnet ø 1.4 [35 mm] 3.5 [ mm] 4.8 [121 mm] 4.7 [119 mm] 2.6 [66 mm] º 0 9, A 850 9, Page 4 of 7

5 Spot Tracking Magnet 120 ø 1.8 [46 mm] 2.6 [66 mm] 4.7 [119 mm] [153 mm] 6.0 º 4.7 [119 mm] ,5 29º A ,5 29º Anthony Spot Track 7.3 [185 mm] º ø 4.3 [110 mm] 4.6 [117mm] 2.2 [55 mm] ø 3.0 [76 mm] 20º º A 40º º º A 40º Page 5 of 7

6 Wallee [12 mm] [ mm] [242 mm] [12 mm] [220 mm] Light Strip 6 [15 mm] 1 [25 mm] SEE TABLE Length Dimmable 11.8 (300 mm) non dimmable 23.6 (600 mm) non dimmable 35.4 (0 mm) non dimmable 47.2 (1200 mm) non dimmable 59 (1500 mm) non dimmable Page 6 of 7

7 How to Specify A. Select and position corners 1. Horizontal - Connect sections on flat surfaces (º corner) 2. Inside - Transition from wall to ceiling (inside corner) 3. External - Turn outside corners for walls and soffits (270 corner) B. Fill lengths between corners with Linear Housings 3, 6 or 9 sections can be specified as feed or intermediate profiles. Profile can be easily cut to site to exact length and joined together. C. Drivers Quantity of drivers determined by total wattage or light elements in section (total maximum possible per linear foot is 34W). Maximum driver distance is 15. Locate drivers nearby. D. Select Spot heads Individual units can be adjusted from % with on board switch. Visit FLOS Worldwide YouTube channel for installation videos Page 7 of 7