LIGHTNIN CLASSIC Clamp-Mount and Fixed-Mount Mixers

Transcription

1 LIGTNIN CLASSIC Clamp-ount and Fixed-ount ixers Proven performance. Guaranteed results. YOU AN LIGTNIN. TE RIGT IX.

2 aximum Performance in igh Flow and igh shear Applications. anufacturing and processing operations have been relying on LIGTNIN CLASSIC Clamp- and Fixed-ount ixers for decades. In fact, more LIGTNIN CLASSIC ixers have been installed around the world than any other mixer model. Continuous technology improvement throughout the years. The CLASSIC ixer you purchase today incorporates design enhancements driven by decades of experience in virtually every known fluid mixing application. You can t buy a more reliable or thoroughly proven mixer. And you can t buy a better guarantee. LIGTNIN CLASSIC irect rive ixers For igh Fluid Shear Applications. Clamp-mount X Series Where high fluid shear is desirable for small batch mixing. Easy-positioning handle facilitates proper in-tank placement and removal. uilt-in dampener pad between housing ball and clamp socket minimizes vibration. Standard URA-IX otor is specifically designed for mixer service. otor and shaft are coupled directly with pilot and keyway for accurate alignment and positive connection. The exclusive LIGTNIN 100% performance guarantee. When you partner with LIGTNIN, you buy with complete confidence, because we don t just guarantee the workmanship of our hardware. We guarantee that your mixer will perform as specified in your application. It s your assurance of complete satisfaction the LIGTNIN Advantage. Single supplied wrench fits both clamp and chuck. One-piece aluminum housing provides exact alignment and superior mechanical strength. Call your LIGTNIN sales engineer to discuss your mixer selection to qualify for your application guarantee. Standard clamp securely mounts to tank rim or support. ixer adjusts 90 vertically, 360 horizontally for optimal in-tank positioning. Indexed ball and socket lets you precisely duplicate settings. Cup mount option retains vertical and horizontal movement with indexing in a permanent mixer mount. Positive chuck grips the tapered flat on the mixer shaft to prevent unintentional shaft release. For added stability, rigid coupling is standard for longer shafts. Coupling is welded to the shaft.

3 irect rive Fixed-mount XQ Series for open tanks For large tanks and continuous processes that require extra long shafts and the stability of permanent installation. Shaft safety cover. See X Series for common mixer features. Shock mounts protect drive against high fluid forces. 8-1/4 AX. 4-41/64 IA. OUNTING OLES 10 IXER ASE K ANGLE RISER ASE K 4-11/16 IA. OUNTING OLES is overall shaft length and varies with application. J L J is overall shaft length and varies with application. N N Angle risers are furnished only when specified. SOCK OUNTS ALTERNATE COUPLING CLAP OUNT, IRECT RIVE X SERIES IG-SPEE, IG SEAR IXERS ax. Wt. odel hp Lbs. F G P Q S T W X Y X X X X X X X FIXE-OUNT, IRECT RIVE XQ SERIES IG SEAR IXERS FOR OPEN TANKS With Angle Without Angle ax. Riser Riser odel hp Wt. Lbs. ax. J L N K XQ XQ XQ XQ XQ XQ XQ

4 irect rive Fixed-mount XC Series for closed tanks Features removable coupling for added stability in applications requiring long overhung shafts. Coupling is rabbetted and keyed to assure positive alignment. Standard ASA 150# series flanges are available in solid steel or steel faced with 316 stainless. Other materials and special flanges are available. Standard 60 psig stuffing box features 7 rings of die-molded packing with separators; a lubricant distributing GFT lantern ring, grease fitting and adjustable 316SS packing gland. Available accessories include cooling or heating jacket. Optional stuffing box for lower pressures features 2 rings of die-molded packing and a packing gland. See X Series for common mixer features. Fixed-mount XS Series for closed tanks With double mechanical seals echanical seal provides maximum sealing with minimum maintenance. See X and XC Series for common mixer features. 3-1/4 8-1/4 AX. 4 AX. OEL XS ONLY ALTERNATE COUPLING 6" is overall shaft length and varies with application. FIXE-OUNT, IRECT RIVE XC SERIES AN XS SERIES (OULE SEAL) IG SEAR IXERS FOR CLOSE TANKS Stuffing echanical ax ox Seal Wt. Std. tg. odel odel P Lbs. ax. Flange ASA* XC XC43 XS XC87 XS XC117 XS XC174 XS XC230 XS XC350 XS * 150# flange drilling. olt holes straddle centerline. Special flanges available.

5 irect rive Clamp-mount XA Series air drive mixers Operate wherever compressed air is available. 1/3, 1 and 3 hp Safe for use in flammable or explosive environments. Air control valve varies speeds. Lightweight design for easy handling. To extend mixer life, optional air line lubrication system filters air supply, regulates pressure and automatically adds oil to lubricate motor. ANLE FURNISE ON OELS XA-33 & -100 ONLY SOWN 90 OUT OF POSITION 2 EYEOLTS FURNISE ON OEL XJA-300 OUSING ALL C L J 6-1/8 N W X Y G F EN VIEW CLAP 11/16 IA. T'G. OLES ALTERNATE COUPLING T S is overall shaft length and varies with application. Q P C L OUSING ALL STANAR CUCK CUP PLATE OPTIONAL OUNTING - REPLACES CLAP AIR PRESSURE/AIR CON- SUPTION GUIE odel CF hp PSIG (Free Air) CLAP OUNT, IRECT RIVE XA SERIES AIR RIVE IXERS ax. odel hp Wt. Lbs. F G J N P Q S T W X Y XA XA XA

6 Tank Selection and ixer ounting Tips. ixer performance greatly depends on proper tank selection and impeller placement. ere are guidelines for getting maximum performance from your Classic mixer: A cylindrical tank is preferable. Recommended liquid level is between 1 and 1-1/2 times the tank diameter. The impeller should be 1 impeller diameter from the tank bottom. The distance between impellers in the same tank should be 2 impeller diameters for geardrive Classic mixers and 4 impeller diameters for directdrive mixers. LIGTNIN CLASSIC Gear rive ixers For igh Fluid Flow Applications. Clamp-mount XJ Series Provides the high torque that s required to mix viscous fluids in the 15,000 to 100,000 centipoise range. Standard URA-IX otor is specifically designed for mixer service. Single reduction, internal helical gears provide high torque and are exceptionally compact and quiet. Easy-positioning handle facilitates proper in-tank placement and removal. One-piece aluminum housing provides exact alignment and superior mechanical strength. LIGTNIN Centering creates vortexing in an unbaffled tank. Normally undesirable, vortexing accelerates the dispersing and dissolving of light liquids and hardto-wet powders. uilt-in dampener pad between housing ball and clamp socket minimizes vibration. Single supplied wrench fits both clamp and chuck. Grip springs provide a keyless friction clutch to protect the gears against shock loads. Angular Off-Center positioning prevents vortexing and eliminates the need for tank baffles. Off-center positioning achieves strong top-to-bottom turnover and is suitable for most mixing and blending. Tank affles prevent vortexing when shafts and impellers are centermounted. Four vertical baffles spaced 90 apart are required. affle width depends on fluid viscosity and other factors. Consult your LIGTNIN Sales Engineer. Standard clamp securely mounts to tank rim or support. ixer adjusts 90 vertically, 360 horizontally for optimal in-tank positioning. Indexed ball and socket lets you precisely duplicate settings. Cup mount option retains vertical and horizontal movement with indexing in a permanent mixer mount. Shaft, motor bearings and gears are lifetime lubricated for continuous service. Positive chuck grips the tapered flat on the mixer shaft to prevent unintentional shaft release. For added stability, rigid coupling is standard for longer shafts. Coupling is welded to the shaft. (Optional rigid rigid coupling is shown. Standard construction is the positive chuck.)

7 8-1/4 AX. Gear rive Fixed-mount XJQ Series for open tanks For large tanks and continuous processes which require extra long shafts and the stability of permanent installation. Units supplied with shaft safety cover. See XJ Series for common mixer features. Shock mounts protect drive against high fluid forces to prolong mixer life. 8-1/4 AX. C L OUSING ALL 4-41/64 IA. OUNTING OLES W X Y EN VIEW CLAP 11/16 IA. T'G. OLES AX. G F ALTERNATE COUPLING 10 IXER ASE ANGLE RISER ASE K K 4-11/16 IA. OUNTING OLES T S Q P is overall shaft length and varies with application. J OUSING C L ALL L CUP PLATE OPTIONAL OUNTING - REPLACES CLAP is overall shaft length and varies with application. N N J Angle risers are furnished only when specified. SOCK OUNTS ALTERNATE COUPLING CLAP OUNT, GEAR RIVE XJ SERIES EAVY-UTY, IG FLOW IXERS ax. Wt. odel hp Lbs. F G P Q S T W X Y XJ XJ XJ XJ XJ XJ XJ FIXE-OUNT, GEAR RIVE XJQ SERIES IG FLOW IXERS FOR OPEN TANKS With Angle Without Angle ax. Riser Riser odel hp Wt. Lbs. ax. J L N K XJQ XJQ XJQ XJQ XJQ XJQ XJQ XJQ

8 Gear rive Fixed-mount XJC Series for closed tanks Features removable coupling for added stability in applications requiring long overhung shafts. Coupling is rabbetted and keyed to assure positive alignment. Standard ASA 150# series flanges are available in solid steel or steel faced with 316 stainless. Other materials and special flanges are available. Standard 150 psig stuffing box features 7 rings of die-molded packing with separators; a lubricant distributing GFT lantern ring, grease fitting and adjustable 316SS packing gland. Available accessories include cooling or heating jacket. Optional stuffing box for lower pressures features 2 rings of die-molded packing and a packing gland. See XJ Series for common mixer features. Fixed-mount series for closed tanks With double mechanical seals XJSS single mechanical seal unit (requires alternate coupling construction as shown). XJS double mechanical seal unit. echanical seal provides maximum sealing with minimum maintenance. See XJ and XJC Series for common mixer features. 6" OEL XJS ONLY 3-1/4 is overall shaft length and varies with application. 8-1/4 AX. 4 AX. ALTERNATE COUPLING FIXE-OUNT, GEAR RIVE XJC SERIES AN XJS SERIES (OULE SEAL) IG FLOW IXERS FOR CLOSE TANKS Stuffing echanical ax. ox Seal Wt. Std. tg. odel odel P Lbs. ax. Flange ASA* XJC30 XJS XJC43 XJS XJC65 XJS XJC87 XJS XJC117 XJS XJC174 XJS XJC230 XJS XJC350 XJS * 150# flange drilling. olt holes straddle centerline. Special flanges available.

9 Gear rive Clamp-mount XJA Series air drive mixers Operate wherever compressed air is available. 1/3, 1 and 3 hp Safe for use in flammable or explosive environments. Air control valve varies speeds. Impossible to burn out the motor, even with a stalling overload. Lightweight design for easy handling. ANLE FURNISE ON OELS XJA-33 & XJA-100 ONLY SOWN 90 OUT OF POSITION 2 EYEOLTS FURNISE ON OEL XJA-300 J 6-1/8 N Energy efficient URA-IX otors esigned specifically for mixer service 6-8 percentage points higher than a standard efficient motor. Can be wired from 200 VAC to 480 VAC, 50 or 60 ertz, 3 phase. Class FJ insulation better suited to withstand overloads or adverse conditions than Class insulation. Thermostats can be wired in series with starter relay or connected to alarm. Singlephase motors have built-in manual reset circuit breakers. Explosion-proof motors are available in 1/4 to 3.5 hp which meet NEC requirements for Class I, Group and Class II, Groups F and G. Thermal protector shuts off unit if operating temperature exceeds safe limits. C OUSING ALL L X Y EN VIEW CLAP 11/16 IA. T'G. OLES Q P C L OUSING ALL T S CUP PLATE OPTIONAL OUNTING - REPLACES CLAP G W F STANAR CUCK ALTERNATE COUPLING is overall shaft length and varies with application. CLAP OUNT, GEAR RIVE XJA SERIES AIR RIVE IXERS ax. odel hp Wt. Lbs. F G J N P Q S T W X Y XJA XJA XJA AIR PRESSURE/AIR CON- SUPTION GUIE odel CF hp PSIG (Free Air)

10 Gear rive Fixed-mount SXJ and SXJS Series side-entering mixers elp maintain suspension for varying levels of stored materials. Also used where there isn t space for a top-entering mixer. Installed mixers are normally supported entirely by the tank mounting flange. Tie rods or mixer support legs can be furnished if tank nozzle lacks sufficient strength and rigidity. Choice of stuffing box or mechanical seal. Stuffing box includes 6 packing rings, lantern ring, grease fitting and adjustable packing gland. Optional shut-off device lets you repack with a full tank. Shut-off device permits mechanical seal change with a full tank. 4-1/2 SXJS ECANICAL SEAL 3-1/ /8 AX. SXJ STUFFING OX /8 34-3/8 AX. 9" AX. 8-1/4 AX. Fixed-mount, doublereduction XL Series mixers for larger vessels Let you increase or decrease mixer speed as process requirements warrant by simply changing gears. URA-IX motor available in 1 to 5 hp. earings are lubricated for life. Explosionproof model available. ouble reduction gears and bearings are grease-lubricated for life. Standard rigid coupling facilitates installation of lower shaft and turbine. Shafts can be specified up to 15 feet for deep tanks. Optional angle risers eliminate the need for baffles in open tanks. FIXE OUNT SXJ AN SXJS SERIES SIE ENTERING IXERS Stuffing echanical ax. Std. tg. ox Seal Wt. Flange ASA* odel odel P Lbs. SXJ SXJS SXJ33 SXJS SXJ75 SXJS SXJ100 SXJS SXJ174 SXJS SXJ230 SXJS SXJ350 SXJS * 150# flange drilling. olt holes straddles centerline. Special flanges available.

11 Gear rive 8-1/4 AX. 11-3/4 1-1/ /2 2-3/4 AX. 13/ AX. ANGLE RISER ASE IXER ASE 4-3/4 IA. OUNTING OLES 5-1/ /2 5-1/2 5-1/2 4-11/16 IA. OUNTING OLES 13 XLQ IXER FOR OPEN TANKS Total ixer Wt. odel hp asic ixer Wt. Lbs. Single Impeller ual Impellers XLQ XLQ XLQ-100F XLQ XLQ XLQ XLQ-150F XLQ XLQ XLQ-200F XLQ XLQ-300C XLQ-500A N.R. 7-5/8 16-3/4 7-5/8 8-1/4 AX. 5-1/2 5-1/2 14-1/2 Angle risers are furnished only when specified. XLC IXERS WIT STANAR STUFFING OX FOR CLOSE TANKS UP TO 150 PSIG Total ixer Wt. odel hp asic ixer Wt. Lbs. Single Impeller ual Impellers Std. tg. Flange ASA* XLC XLC XLC-100F XLC XLC XLC XLC-150F XLC XLC XLC-200F XLC XLC-300C XLC-500A N.R. 8-1/2 4 AX. 43-1/2 AX. 11-3/4 13/ /4 SQ. 6-5/8 4-1/8 AX. 8-1/4 AX. * 150# flange drilling. olt holes straddles centerline. Special flanges available. 9" 4 AX. 43-3/4 AX. 11-3/4 13/ /4 SQ. 6-5/8 2-1/2 AX. XLSS IXERS WIT SINGLE ECANICAL SEAL FOR CLOSE TANKS XLS IXERS WIT OULE ECANICAL SEAL FOR CLOSE TANKS Total ixer Wt. odel hp asic ixer Wt. Lbs. Single Impeller ual Impellers Std. tg. Flange ASA* XLSS & XLS XLSS & XLS XLSS & XLS-100F XLSS & XLS XLSS & XLS XLSS & XLS XLSS & XLS-150F XLSS & XLS XLSS & XLS XLSS & XLS-200F XLSS & XLS XLSS & XLS-300C XLSS & XLS-500A N.R. * 150# flange drilling. olt holes straddles centerline. Special flanges available.

12 atch the CLASSIC ixer to Your Application Table based on tank where liquid level is within 1.5 times tank diameter. There is no single mixer selection for any given application; mixer selection may vary with temperatures, retention times, tank shapes and specific application requirements. LIGTNIN Typical Viscosity Values at 70 F Centipoise Water 1 Gasoline 8 Kerosene 10 Sulfuric acid 25 lood 50 Sae 10 oil 60 Olive oil 100 Glucose 500 Paint 500 Castor oil 1000 Glycerine 1500 Glycerol 1500 Catsup 3000 olasses 3000 oney 5000 Corn syrup T T (tank diameter) Viscosity/Gallonage Viscosity (Centipoise) Gallonage S1U10 S1U10 S1U10 X30 X30 XJ30 XJ30 XJ43 XJ65 XL100 XL100F 100 S1U10 X30 X30 X30 XJ30 XJ30 XJ30 XJ65 XJ87 XL100 XL150F 250 S1U10 X30 X30 XJ30 XJ30 XJ43 XJ65 XJ87 XJ117 XK200F XL300F 500 S1U10 X30 XJ30 XJ30 XJ30 XJ65 XJ87 XJ117 XJ174 XL100 XL200F 1,000 X43 XJ30 XJ30 XJ43 XJ65 XJ87 XJ117 XJ174 XJ230 XL200F 2,500 XJ30 XJ30 XJ65 XJ87 XJ117 XJ117 XJ174 XJ230 XL200F 5,000 XJ30 XJ65 XJ87 XJ117 XJ174 XJ230 XJ350 XL200F 15,000 XJ65 XJ87 XJ117 XJ174 XJ350 XL200F For odel S1U10 mixer, see ulletin t. Read lvd., P.O. ox 1370, Rochester, New York Telephone: IX EST, Fax: Rochester, NY, USA Poynton, England Jurong, Singapore Sydney, Australia ilan, Italy Johannesburg, South Africa Shanghai, China ublin, Ireland Seoul, Korea