PARALLEL SHAFT DRIVES

Transcription

1 ARALLEL SAT RIVES Introductory Information re-selection Information Quick Selection Tables Rating and imensions odels 251 and Single Reduction Speed Reducer , -7 odel 22 - Single Reduction Speed Reducer , -9 odel Single Reduction Speed Reducer , -11 odel Single Reduction Speed Reducer , -13 odel Single Reduction Speed Reducer , -15 odel 85L - Single Reduction Speed Reducer , -17 odel Single Reduction Speed Reducer , -19 odel 95L - Single Reduction Speed Reducer , -21 odel 95 - Single Reduction Speed Reducer , -23 odel Single Reduction Speed Reducer , -25 odel 52 - ouble Reduction Speed Reducer , -27 odel 83L & 83S - ouble Reduction Speed Reducers , -29 odel 89 - ouble Reduction Speed Reducer , -31 odel 1 - ouble Reduction Speed Reducer , -33 odel 2 - ouble Reduction Speed Reducer , -35 odel 3 - ouble Reduction Speed Reducer , -37 odel 4 - ouble Reduction Speed Reducer , -39 odel 5 - ouble Reduction Speed Reducer , -41 odel 6 - ouble Reduction Speed Reducer , -43 odel 75 - ouble Reduction Speed Reducer , -45 odel 8 - ouble Reduction Speed Reducer , -47 odel T100 - Shifting Transmission , -49 SAE Standards to -51 actory Options

2 arallel SAT rives Basic Specifications ower ratings from 2 to 530 hp Output Torque to 120,000 inch/lbs Ratios from 1:1 through 70:1 Output Speeds 24 rpm to 2400 rpm Standard eatures Up to three input modes for integrating with hydraulic or electric motors or for externally coupled driving sources. Cast iron housing designed for superior thermal conductivity provides rigid gear and bearing support. igh strength alloy case hardened gears for greater wear life. Alloy shafting for greater strength. recision ball bearings or tapered roller bearings for endurance and strength. eavy duty industrial seals to keep contaminants out. Optional eatures odified Standard and Custom esigns Optional Output Bore Sizes for Shaft ount Versions CleanLine Washdown and BISSC Configurations Unique or arsh Environment Adaptations otorized arallel Shaft rives otors roduced by arathon Electric for igh Efficiency, Reliability and urability eneral or efinite urpose otors Brake or Inverter uty otors, C or Washdown otors otor/ear rive ackage Incentives Available, Consult actory or ore Shaft ounted Reducers See owertorque Shaft ount Reducers Section & oweratio 2000 Compact elical arallel rives Section J -2

3 UB CITY ARALLEL SAT RIVES re-selection Information eneral esign eatures ub City parallel shaft speed reducers provide you with a nearly unlimited degree of design flexibility in OE configurations, or for incorporation in existing systems. Up to three input modes provide for integration with hydraulic motors, electric motors, or for externally coupled driving sources. Units can be specified for torque to 122,361 lb.-in., horsepower ratings to 530.., and reduction ratios to 70:1, depending on the model and AA class of operation required. The wide range of ratios is facilitated by the availability of single and double reduction designs. ub City parallel-shaft speed reducers provide the advantages of a sealed, integrated configuration compact and easily planned into your systems with inherently accurate shaft alignment. A wide range of ratios and ratings offer a selection which can usually be utilized with the driven equipment. These capabilities can also be extended where necessary by use of external V-belts, chains, and other couplings. Shaft All units are designed for long service under heavy-duty conditions, and machined from high alloy grey iron or ductile iron housing castings. The gear drives are equipped with ball, roller or tapered roller bearings, depending on position in the gear train and on operating requirements. Units also include high strength high alloy case hardened gears, double lip seals, and high quality steel shafts and sleeves. ub City provides adaptors for most units for both hydraulic and NEA C ace electric motors, as well as all required bushings, backstops, torque arms, and other accessories that may be required for most applications. Consult each individual reducer dimension page for input styles available. This catalog includes representative standard ub City shaft-mounted speed reducers; however, complete engineering capabilities are available to you for development of modified or new designs. Input Configuration escriptions Shaft Input Units These speed reducers are designed for external coupling through V-belts, chain drives, or other means. Overhung load data can be provided on individual models. ydraulic Electric ydraulic otor Units These speed reducers are provided with either a 2-bolt or 4-bolt mounting flange for direct coupling to a hydraulic motor. The hydraulic motor shaft mates directly with the reducer input pinion through a spline or round key adaptor. A floating adaptor accommodates any possible concentricity difference. Electric otor Units ub City speed reducers in this group are equipped with a NEA C flange for direct mounting to a flanged electric motor. The electric motor shaft and reducer input pinion mate coaxially. Backstops Backstops Optional backstops are offered at extra cost for applications that require the prevention of reverse rotation. Backstops are built-in to the high speed shaft module assembly. Backstops must be factory assembled. When ordering specify desired direction of free rotation of the reducer output shaft as viewed facing the end of the shaft extension. ow To Order When ordering a arallel Shaft rive it is necessary to select a model, gear ratio, input configuration and assembly style where applicable. or shaft mounted units also specify output bore size. CALL: (605) Caution: Backstops are not recommended for applications involving energy absorption and shock or torque loads in excess of reducer ratings or on applications such as chair lifts, amusement rides, etc. where the safety of a person or property is dependent on their function. On such applications, other safety devices should be provided. Backstops are designed to prevent rotation not more than five times in an 8 hour period with a minimum of one minute in the over-running direction between each engagement. If reversing operation is more frequent or over-running time is less, the application should be referred to the factory. NOTE: Lubricants with extreme pressure (E) additives should not be used in units with built-in backstop. Input configuration options: Shaft ydraulic (specify flange size and input bushing size) Electric(specify flange size and input bushing size) (see above for Input Configuration escriptions) Not all input configurations are available on all models. See individual model pages for input configurations available. AX: (605)

4 UB CITY ARALLEL SAT RIVES Quick odel Selection ub City arallel Shaft Speed Reducers can be selected on the basis of speed and torque or horsepower. Quick selection tables on the following pages can be used with 1750 rpm input speed and uniform power source. Table 3 provides reducer selection by.. and output speed. It also provides different AA load classifications designated for shaft mount reducers. Tables 4 and 5 provide selection by output torque and output speed, for Class I service (1.00 S..). Conversion factors for AA class II and III are provided below the tables. or other input speeds, and specific rating data, refer to the unit rating tables for each model. TABLE 1 SERVICE ACTORS riven achine Load Classification uration of Service edium eavy rime over er ay (1) Uniform Shock Shock Occasional 1/2 hr. * * 1.25 Electric Intermittent 3 hrs. * otor 3-10 hours Over 10 hours Electric otor Occasional 1/2 hr. * With requent Intermittent 3 hrs Starts and 3-10 hours Stops (2) Over 10 hours ulti-cylinder Occasional 1/2 hr. * Internal Intermittent 3 hrs Combustion 3-10 hours Engine Over 10 hours Single Cylinder Occasional 1/2 hr Internal Intermittent 3 hrs Combustion 3-10 hours Engine Over 10 hours Reversing Service Application Consult actory * Unspecified service factors should be 1.0 or as agreed upon by user and manufacturer. Explanatory Notes 1. Time specified for intermittent and occasional service refers to total operating time per day. 2. Term frequent starts and stops refers to more than 10 starts per hour. Table 3 REUCER SELECTION:.. / OUTUT SEE CLASS I CLASS II CLASS III Output Output Output R odel R odel R odel 1/ / / ,83,85L ,83,85L ,83,85L / ,83,85L ,83,85L ,83,85L ,83,85L ,83,85L ,83,85L ,95L / ,83,85L ,83,85L ,83,85L ,95L ,95L ,95L ,83,85L ,83,85L ,83,85L ,95L ,95L ,83,85L ,83,85L ,83,85L L ,95L ,95L CLASS I CLASS II CLASS III Output Output Output R odel R odel R odel ,83,85L ,83,85L ,83,85L ,95L ,95L ,95L / ,83,85L ,83,85L ,83,85L ,95L ,95L ,95L ,83,85L ,83,85L ,83,85L ,95L ,95L ,95L ,83,85L ,83,85L ,95L ,95L ,95L NOTE: The AA Load classes provide for a momentary or starting load of 2.0 times for Class I, 2.8 for class II and 4.0 for Class III SERVICE ACTORS The ratings for gear drives in this manual are based on a service factor of 1.00, for uniform load and uniform power source, up to 10 hours of operation per day. or other operating conditions, the application horsepower or torque must be multiplied by the appropriate service factor, to determine the equivalent gear drive power rating. A gear drive should be selected with a rated capacity equal to or greater than the equivalent rating. AA Load Classification Numbers for earmotors and Shaft ount Reducers are listed on pages A-5 and A-6. AA Load Classification Numbers for rives and Reducers are listed on pages A-7 and A-8. Table 1 designates recommended service factors for various conditions of load, power source, and duration of service. Table 2 designates load classification numbers for gearmotors and shaft mount reducers with uniform power source, and indicates the relationship between service factors and load classification numbers. Refer to page A-2 for further information and cautions on the selection of proper service factors. Table 2 LOA CLASSIICATION NUBERS Load class Up to 3 hrs. 3 to 10 hrs. Over 10 hrs. (S..) Total Operation Total Operation Total Operation er ay er ay er ay I oderate Uniform (1.0) Shock Load Load II eavy oderate Uniform (1.4) Shock Load Shock Load Load III eavy oderate (2.0) Shock Load Shock Load CLASS I CLASS II CLASS III Output Output Output R odel R odel R odel ,83,85L ,95L ,95L ,95L ,95L ,95L ,95L ,95L

5 UB CITY ARALLEL SAT Quick odel Selection Table 4 Output Torque Selection Single Reduction Speed Reducers Output Rotation Opposite Input Rotation (Selections Based on 1750 Input or other Input Speeds see Rating Tables) (Torque iven in Lb.-In. ax., for AA Class I Service*) OUTUT OEL NUBERS SEE Nominal (R) Ratio L L :1 NA 919 NA NA 3179 NA 5589 NA NA :1 NA 1100 NA NA NA NA 6917 NA NA : NA NA NA :1 NA 1237 NA NA NA NA NA NA NA NA 583 3:1 787 NA 713 NA NA :! 857 NA NA :1 913 NA NA 3740 NA :1 NA NA NA 1084 NA 3866 NA 6600 NA NA :1 NA NA NA 917 NA NA NA NA NA NA 219 8:1 NA NA NA 851 NA NA NA NA NA NA * or AA Class II Service, divide torque ratings by 1.4; for Class III, by 2.0. Table 5 Output Torque Selection ouble Reduction Speed Reducers Output Rotation Same As Input Rotation (Selections Based on 1750 Input or other Input Speeds see Rating Tables) (Torque iven in Lb.-In. ax., for AA Class I Service*) OUTUT OEL NUBERS SEE Nominal (R) Ratio 52 83L :1 NA NA NA 3871 NA NA :1 NA 3833 NA NA 5475 NA NA NA NA NA NA 218 8:1 NA 4025 NA NA 5829 NA NA NA NA NA :1 NA NA NA NA :1 NA 4318 NA NA 6196 NA NA NA NA NA :1 NA NA NA 7813 NA : NA NA NA NA NA NA NA NA NA 88 20: NA NA NA NA 70 25: NA NA :1 NA NA NA NA NA :1 NA NA NA NA NA 9532 NA NA NA NA NA 39 45:1 NA NA NA NA NA 9624 NA NA NA NA NA 35 50:1 NA NA NA NA NA NA NA 30 60:1 NA NA NA 5824 NA NA NA NA NA NA NA 27 65:1 NA NA NA NA NA 9737 NA NA NA NA NA 24 70:1 NA NA NA 5859 NA NA NA NA NA NA NA * or AA Class II Service, divide torque ratings by 1.4; for Class III, by

6 UB CITY ARALLEL SAT RIVES odels 251 & Single Reduction eatures our ratios available from 2:1 to 5:1 Can be used as reducer or increaser. rovides additional reduction capability when mounted onto elical ear Reducer or Worm ear Reducer C-flange or solid input shaft. elical gearing. ouble lip seals. Cast aluminum housing. Base mounting available. ermanently lubricated at factory. SINLE REUCTION UNITS ROVIE OOSITE IRECTION OUTUT ROTATION Input Ratios R* 2:1 3:1 4:1 5:1 INUT ORSEOWER OUTUT R OUTUT TORQUE IN.-LBS INUT ORSEOWER OUTUT R OUTUT TORQUE IN.-LBS INUT ORSEOWER OUTUT R OUTUT TORQUE IN.-LBS INUT ORSEOWER OUTUT R OUTUT TORQUE IN.-LBS INUT ORSEOWER OUTUT R OUTUT TORQUE IN.-LBS INUT ORSEOWER OUTUT R OUTUT TORQUE IN.-LBS INUT ORSEOWER OUTUT R OUTUT TORQUE IN.-LBS WR 2 (LB.-IN. 2 ) odel Referred To igh Speed Shaft odel WR 2 (LB.-IN. 2 ) Referred To odel Low Speed Shaft odel Overhung Load At Center Of Shaft Extension R Input Input O..L. 100 LBS. Output OL 7/8 Shaft 500 LBS. Weight odel 251 odel LBS LBS. * OR IER INUT SEES, CONSULT ACTORY -6

7 Single Reduction UB CITY ARALLEL SAT RIVES odels 251 & Single Reduction odel /32 IENSIONS SOWN ARE OR REERENCE ONLY. CERTIIE RINTS ARE AVAILABLE UON REQUEST. 2-3/32 1-1/2 3/16 X 3/32 KW 1-1/8 E. LT. 3/16 X 3/32 KW 1-3/8 E. LT. 5/ /16 1/4 NT (4) *.874 OTIONAL T. EET C /32 IA. (4) 3-1/2 (4) 3/8 NC X 1 EE ON A B.C. 5/ /8 4-11/16 9/ /16 NOTE: OUNTIN EET AVAILABLE OR BOT OELS AS AN OTION. ART NUBER OR OELS 251 AN 254. odel /32 C L B IA. (4) EQUALLY SACE K 3/16 X 3/32 KW 1-3/8 E. LT. 5/32 J *.874 AS CAST R C.. US-O (2) 3-3/8 N 1/4 NT (4) (4) 3/8 NC X 1 EE ON A B.C. * OTIONAL.625 OUTUT SAT TO BE USE TO CONNECT.624 TO 56C LANE ONLY. OTOR NEA B.C. COUNTER SAT KEYWAY LANE IA. BORE QUILL C J K L N R 56C 7-17/ /32 13/32 5-7/ /16 X 3/32 2-1/4 3/8 9/16 SLOTS 9 143TC, 145TC, / /32 13/32 5-7/8 182C, 184C /16 x 3/32 2-1/4 3/8 9/16 SLOTS 9 182TC, 184TC, / /32 7-1/4 213C, 215C /4 x 1/8 3-1/8 7/16 13/16 OLES 10-1/4 NOTE: When 182TC motor flange is used on this unit, additional support should be provided for the motor, or this unit should be supported on a foot mounted motor. -7

8 UB CITY ARALLEL SAT RIVES odel 22 - Single Reduction eatures Rugged cast iron housing designed for rigid gear and bearing support. Alloy shafting for greater strength. Tapered roller bearings for endurance and strength. Choice of four (4) standard gear ratios. eat treated alloy steel gearing for strength and long wear life. eavy-duty industrial seals to keep lubricant in and dirt out. Shaft mount units available. (Style SO.) oot mount kits available. art Number UB CITY lubricant recommended. (Refer to Section R.) Rating Table SINLE REUCTION UNITS ROVIE OOSITE IRECTION OUTUT ROTATION INUT RATIOS R 1:1 1.5:1 2:1 2.53:1 INUT ORSEOWER OUTUT R OUTUT TORQUE IN. LBS INUT ORSEOWER OUTUT R OUTUT TORQUE IN. LBS INUT ORSEOWER OUTUT R OUTUT TORQUE IN. LBS INUT ORSEOWER OUTUT R OUTUT TORQUE IN. LBS INUT ORSEOWER OUTUT R OUTUT TORQUE IN. LBS /16 1-1/2 1/8 1-31/ /16 21/64 IA. (4) OOT OUNTIN KIT 1/2 UST BE ORERE IN AITION TO RIVE I REQUIRE. ART NO

9 Single Reduction UB CITY ARALLEL SAT RIVES odel 22 - Single Reduction 2-11/16 5-3/8 2-1/2 4-1/4 8-1/2 1-5/8 R TY. AS CAST 2-1/ /2 R 1/4 X 1/8 KEYWAY 1-31/32 E. LT. 2-11/16 3-1/ /4 X 1/8 KEYWAY 1-31/32 E. LT. 8-3/ C.. 1-1/2 9-1/4 3/8 NT (4) 2-1/2 1-15/16 3-1/2 31/32 2-1/2 R /4 3-1/8 5/16 IA. BOLT STYLE SO BORE IENSIONS OR LUBRICATION AN INSTALLATION INSTRUCTIONS - REER TO SECTION R 1/4 X 1/8 KEYWAY RY SIIN WEIT 24 LBS. 1-7/8 3-3/4 IENSIONS SOWN ARE OR REERENCE ONLY. CERTIIE RINTS ARE AVAILABLE UON REQUEST. Standard Styles Available Δ INICATES I SEE SAT. OTER STYLES AVAILABLE. STYLE A STYLE C STYLE O STYLE SO CONSULT ACTORY OR VERTICAL SAT LUBRICATION RECOENATIONS INUT SAT CAN BE ROTATE IN EITER IRECTION -9

10 UB CITY ARALLEL SAT RIVES odel Single Reduction eatures Rugged cast iron housing designed for rigid gear and bearing support. Alloy shafting for greater strength. eat treated alloy steel pinion and alloy cast iron gear for strength and long life. Needle bearings on high speed shaft. Bronze bushings on low speed shaft. Choice of three (3) gear ratios. eavy-duty industrial seals to keep lubricant in and dirt out. UB CITY lubricant recommended. (Refer to Section R) SINLE REUCTION UNITS ROVIE OOSITE IRECTION OUTUT ROTATION Rating Table INUT RATIOS R 3.11:1* 4.21:1* 5:1 INUT ORSEOWER OUTUT R OUTUT TORQUE IN. LBS INUT ORSEOWER OUTUT R OUTUT TORQUE IN. LBS INUT ORSEOWER OUTUT R OUTUT TORQUE IN. LBS INUT ORSEOWER OUTUT R OUTUT TORQUE IN. LBS INUT ORSEOWER OUTUT R OUTUT TORQUE IN. LBS *. TO ORER CONSULT ACTORY OR RICE AN ELIVERY. -10

11 Single Reduction UB CITY ARALLEL SAT RIVES odel Single Reduction 1-15/ /32 3/16 X 3/32 KEYWAY 1-7/32 E. LT. 1-3/4 31/ /16 2-5/32 31/32 1-3/8 1-3/8 31/32 1/4 NT (2) / / C /8 RILL (2) AT /16 4 1/8 3-1/4 3-13/16 5-5/16 9-1/8 1-1/4 2-23/ /32 4-1/8 1/4 IA. BOLT 8-1/4 OR LUBRICATION AN INSTALLATION INSTRUCTIONS - REER TO SECTION R RY SIIN WEIT 23 LBS. IENSIONS SOWN ARE OR REERENCE ONLY. CERTIIE RINTS ARE AVAILABLE UON REQUEST. Standard Styles Available Δ INICATES I SEE SAT. OTER STYLES AVAILABLE. STYLE A STYLE C STYLE O CONSULT ACTORY OR VERTICAL SAT LUBRICATION RECOENATIONS INUT SAT CAN BE ROTATE IN EITER IRECTION -11

12 UB CITY ARALLEL SAT RIVES odel Single Reduction eatures Rugged cast iron housing designed for rigid gear and bearing support. Alloy shafting for greater strength. Tapered roller bearings for endurance and strength. Choice of five (5) gear ratios. eat treated alloy steel pinion and alloy cast iron gear for strength and long wear life. eavy-duty industrial seals to keep lubricant in and dirt out. UB CITY lubricant recommended. (Refer Section R) SINLE REUCTION UNITS ROVIE OOSITE IRECTION OUTUT ROTATION Rating Table INUT RATIOS R 3.95:1* 5:1 6.2:1* 7.3:1* 8:1 INUT ORSEOWER OUTUT R OUTUT TORQUE IN. LBS INUT ORSEOWER OUTUT R OUTUT TORQUE IN. LBS INUT ORSEOWER OUTUT R OUTUT TORQUE IN. LBS INUT ORSEOWER OUTUT R OUTUT TORQUE IN. LBS INUT ORSEOWER OUTUT R OUTUT TORQUE IN. LBS *. TO ORER CONSULT ACTORY OR RICE AN ELIVERY. -12

13 Single Reduction UB CITY ARALLEL SAT RIVES odel Single Reduction 9-13/ /16 3-7/16 3-7/ /16 3-3/4 1-15/ /16 1-7/8 1/2 NT (4) /16 X 3/32 KEYWAY 1-7/32 E. LT / C /16 4-3/ /16 13/32 RILL (2) AT /4 3-13/ /16 1-1/4 5/16 IA. BOLT 3-13/ /16 1-9/16 2-1/2 11-5/8 5-13/16 OR LUBRICATION AN INSTALLATION INSTRUCTIONS - REER TO SECTION R RY SIIN WEIT 42 LBS. Standard Styles Available IENSIONS SOWN ARE OR REERENCE ONLY. CERTIIE RINTS ARE AVAILABLE UON REQUEST. Δ INICATES I SEE SAT. OTER STYLES AVAILABLE. STYLE A STYLE C CONSULT ACTORY OR VERTICAL SAT LUBRICATION RECOENATIONS INUT SAT CAN BE ROTATE IN EITER IRECTION -13

14 UB CITY ARALLEL SAT RIVES odel Single Reduction eatures Rugged cast iron housing designed for rigid gear and bearing support. Alloy shafting for greater strength. Tapered roller bearings for endurance and strength. eat treated alloy steel gearing for strength and long wear life. elical gears for greater strength and lower noise level. eavy-duty industrial seals to keep lubricant in and dirt out. UB CITY lubricant recommended. (Refer to Section R) SINLE REUCTION UNITS ROVIE OOSITE IRECTION OUTUT ROTATION Rating Table INUT RATIO R 1:1 INUT ORSEOWER OUTUT R 1750 OUTUT TORQUE IN. LBS INUT ORSEOWER OUTUT R 1150 OUTUT TORQUE IN. LBS INUT ORSEOWER OUTUT R 850 OUTUT TORQUE IN. LBS INUT ORSEOWER OUTUT R 690 OUTUT TORQUE IN. LBS INUT ORSEOWER OUTUT R 100 OUTUT TORQUE IN. LBS

15 Single Reduction UB CITY ARALLEL SAT RIVES odel Single Reduction 7-13/ / / / /4 3-1/4 5-1/8 1-7/16 2-7/8 1-1/ /16 1-1/32 3-1/32* 2-15/ * /4 3-29/32 1/4 X 1/8 KEYWAY * 2-13/32 E. LT. 2-7/8 1-1/ C /16 2-7/8 1-1/4 * IENSIONS TYICAL ALL SAT EXTENSIONS 2-3/4 2-15/32 5/16 IA. BOLT 1-11/16 3-1/4 1/4 NT (4) OR LUBRICATION AN INSTALLATION INSTRUCTIONS - REER TO SECTION R RY SIIN WEIT 62 LBS. Standard Styles Available IENSIONS SOWN ARE OR REERENCE ONLY. CERTIIE RINTS ARE AVAILABLE UON REQUEST. Δ INICATES I SEE SAT. OTER STYLES AVAILABLE. STYLE A STYLE C STYLE O CONSULT ACTORY OR VERTICAL SAT LUBRICATION RECOENATIONS INUT SAT CAN BE ROTATE IN EITER IRECTION -15

16 UB CITY ARALLEL SAT RIVES odel 85L Single Reduction eatures Rugged cast iron housing designed for rigid gear and bearing support. Alloy shafting and sleeves for greater strength. Ball bearings on all shafts. Choice of five (5) standard ratios. eat treated alloy steel gearing for strength and long wear life. eavy-duty industrial seals to keep lubricant in and dirt out. Shaft mount design for direct mounting on the drive shaft of equipment to be driven. UB CITY lubricant recommended. (Refer to Section R) Unit may be operated as a speed increaser or speed reducer. Rating Tables SEE REUCER RATIOS INUT R 2.04:1 3.12:1 4.00:1 5.00:1 6.09:1 INUT ORSEOWER OUTUT R OUTUT TORQUE IN. LBS INUT ORSEOWER OUTUT R OUTUT TORQUE IN. LBS INUT ORSEOWER OUTUT R OUTUT TORQUE IN. LBS INUT ORSEOWER OUTUT R OUTUT TORQUE IN. LBS INUT ORSEOWER OUTUT R OUTUT TORQUE IN. LBS SEE INCREASER RATIOS INUT R 1:2.04 1:3.12 1:4.00 1:5.00 1:6.09 INUT ORSEOWER OUTUT R 2043 OUTUT TORQUE IN. LBS INUT ORSEOWER OUTUT R OUTUT TORQUE IN. LBS INUT ORSEOWER OUTUT R OUTUT TORQUE IN. LBS INUT ORSEOWER OUTUT R OUTUT TORQUE IN. LBS INUT ORSEOWER OUTUT R OUTUT TORQUE IN. LBS SINLE REUCTION UNITS ROVIE OOSITE IRECTION OUTUT ROTATION

17 Single Reduction UB CITY ARALLEL SAT RIVES odel 85L Single Reduction 3-1/2 3/8 3-1/8 2-9/16 T KEYWAY 1-3/4 E. LT. 29/64 IA. OLE 2-1/2 S 7/8 7-7/ C.. 5/8 1/2 X 1/8 KEYWAY 1-5/ /32 4-3/ /8 1/4 NT (2) 2-7/16 1/8 NT (2) SAT OUNTE UNITS REQUIRE TORQUE ARS. TORQUE AR KITS ARE AVAILABLE SEE AE -51. AITIONAL RATIOS, OUTUT BORES AN INUT BORES ARE AVAILABLE CONSULT ACTORY. 4 17/32 TY. 8-3/4 4-3/8 5/16 IA. BOLT OR LUBRICATION AN INSTALLATION INSTRUCTIONS - REER TO SECTION R E IENSIONS SOWN ARE OR REERENCE ONLY. CERTIIE RINTS ARE AVAILABLE UON REQUEST. RY SIIN WEIT 40 LBS. 1-3/8 LANE E SAE A-2 SAE A-2CL SAE B-2 I SEE SAT IENSIONS RATIO S IA. T KEYWAY 2:1, 3:1, 4:1 & 5: /.998 1/4 X 1/8 6:1.875/.874 3/16 X 3/32 SAE A-2CL2000 SAE B-4 NEA 56C NEA 182TC SEE CART OR (QTY) J OLES ON K B.C. OR EAC LANE SIZE INUT BUSIN SIZES.625 IA. - 3/16 X 3/32 KW IA. - 1/4 X 1/8 KW 1-6B SLINE 14T - 12/24.. SLINE.875 IA. - 3/16 X 3/32 KW IA. - 1/4 X 1/8 KW 9T - 16/32.. SLINE 15T - 16/32.. SLINE IA. - 1/4 X 1/8 KW IA. - 5/16 X 1/8 KW 13T - 16/32.. SLINE 21T - 16/32.. SLINE COUNTERBORE (QTY) J B.C. IA. OLES K A-2 1-7/ / /16 7/16 (2) 3/8 NC 4-3/16 5-1/8 4-1/16 A-2CL 1-7/ / /16 7/16 (2) 1/2 NC 4-3/16 5-1/8 4-1/16 A-2CL / / /32 51/64 (2) 1/2 NC 4-3/16 5-1/2 5-1/2 B-2 1-7/ / /16 7/16 (2) 1/2 NC 5-3/4 6-7/8 5-1/4 B-4 1-7/ / /16 7/16 (4) 1/2 NC 5 5-1/8 5-1/8 56C 1-5/ / /16 5/8 (4) 13/32 IA. 5-7/8 6-9/ TC 2-7/ / /16 1-7/16 (4) 17/32 IA. 7-1/4 9-1/

18 UB CITY ARALLEL SAT RIVES odel Single Reduction eatures Rugged cast iron housing designed for rigid gear and bearing support. Alloy shafting for greater strength. Tapered roller bearings for endurance and strength. Choice of five (5) standard gear ratios. eat treated alloy steel gearing for strength and long wear life. elical gears for greater strength and lower noise level. eavy-duty industrial seals to keep lubricant in and dirt out. uctile iron feet provide rigid mounting base. Shaft mount units available. (Style SO.) UB CITY lubricant recommended. (Refer to Section R) SINLE REUCTION UNITS ROVIE OOSITE IRECTION OUTUT ROTATION Rating Table RATIOS INUT 1:1 1.5:1 2:1 3:1 4:1 R ELICAL ELICAL ELICAL ELICAL ELICAL INUT ORSEOWER OUTUT R OUTUT TORQUE IN. LBS INUT ORSEOWER OUTUT R OUTUT TORQUE IN. LBS INUT ORSEOWER OUTUT R OUTUT TORQUE IN. LBS INUT ORSEOWER OUTUT R OUTUT TORQUE IN. LBS INUT ORSEOWER OUTUT R OUTUT TORQUE IN. LBS

19 Single Reduction UB CITY ARALLEL SAT RIVES odel Single Reduction 2-11/16 6-7/8 5-3/8 25/32 1-3/32 3-3/16 3-3/16 1-3/32 25/32 5/16 IA. BOLT 1/2 IA. OLE (4) 2-1/ /32 3-7/ /16 5-1/ * /32 1-1/ C /32 2-1/2* * 3/8 X 3/16 KEYWAY 1-3/4 E. LT. 2-19/32* 3-19/ /32 4-1/4 5-1/2 2-1/8 9-3/8 1-7/16 2-7/8 4-11/ * IENSIONS TYICAL ALL SAT EXTENSIONS 5-1/2 3-19/32 4-1/ /32 8-1/ /8 11-3/8 1/2 NT (3) 2-1/4 4-1/2 1/4 X 1/8 KEYWAY STYLE SO BORE IENSIONS Standard Styles Available OR LUBRICATION AN INSTALLATION INSTRUCTIONS - REER TO SECTION R SAE A-2, B-2/4, C-2 & C-4 OTOR LANES AVAILABLE ON I SEE SAT AS OIIE STANAR UNITS. RY SIIN WEIT 83 LBS. OTIONAL OUTUT BORE: 1-1/2 WIT 3/8 X 3/16 KEYWAY IENSIONS SOWN ARE OR REERENCE ONLY. CERTIIE RINTS ARE AVAILABLE UON REQUEST. Δ INICATES I SEE SAT. OTER STYLES AVAILABLE. STYLE A STYLE C STYLE O STYLE SO CONSULT ACTORY OR VERTICAL SAT LUBRICATION RECOENATIONS INUT SAT CAN BE ROTATE IN EITER IRECTION -19

20 UB CITY ARALLEL SAT RIVES odel 95L Single Reduction eatures Rugged cast iron housing designed for rigid gear and bearing support. Alloy shafting and sleeves for greater strength. Ball bearings on high speed shaft. Tapered roller bearings on low speed shaft. Choice of five (5) standard gear ratios. eat treated alloy steel gearing for strength and long wear life. eavy-duty industrial seals to keep lubricant in and dirt out. Shaft mount design for direct mounting on the drive shaft of equipment to be driven. UB CITY lubricant recommended. (Refer to Section R) Unit may be operated as a speed increaser or speed reducer. Rating Tables SINLE REUCTION UNITS ROVIE OOSITE IRECTION OUTUT ROTATION SEE REUCER RATIOS INUT R 2.19:1 3.10:1 4.19:1 4.86:1 5.83:1 INUT ORSEOWER OUTUT R OUTUT TORQUE IN. LBS INUT ORSEOWER OUTUT R OUTUT TORQUE IN. LBS INUT ORSEOWER OUTUT R OUTUT TORQUE IN. LBS INUT ORSEOWER OUTUT R OUTUT TORQUE IN. LBS INUT ORSEOWER OUTUT R OUTUT TORQUE IN. LBS SEE INCREASER RATIOS INUT R 1:2.19 1:3.10 1:4.19 1:4.86 1:5.83 INUT ORSEOWER OUTUT R 2192 OUTUT TORQUE IN. LBS INUT ORSEOWER OUTUT R OUTUT TORQUE IN. LBS INUT ORSEOWER OUTUT R OUTUT TORQUE IN. LBS INUT ORSEOWER OUTUT R OUTUT TORQUE IN. LBS INUT ORSEOWER OUTUT R OUTUT TORQUE IN. LBS

21 UB CITY ARALLEL SAT RIVES odel 95L Single Reduction 1/2 4-9/ /32 4 3/4 R 29/64 IA. OLE 5/16 X 5/32 KEYWAY 2-1/2 E. LT. 1-5/32 3-7/ / / C.. 7/8 1/2 X 1/8 KEYWAY 2-1/2 3 SAT OUNTE UNITS REQUIRE TORQUE ARS. TORQUE AR KITS ARE AVAILABLE SEE AE /16 3 AITIONAL RATIOS, OUTUT BORES AN INUT BORES ARE AVAILABLE CONSULT ACTORY. 1/8 NT (4) 3/8 NT (4) 6-1/2 1/2 TY. 1-1/ /16 IA. BOLT RY SIIN WEIT 95 LBS. E SEE CART OR (QTY) J OLES ON K B.C. OR EAC LANE SIZE OR LUBRICATION AN INSTALLATION INSTRUCTIONS - REER TO SECTION R IENSIONS SOWN ARE OR REERENCE ONLY. CERTIIE RINTS ARE AVAILABLE UON REQUEST. 1-3/8 SAE A-2 SAE A-2CL SAE B-2 SAE C-2 SAE A-2CL2000 SAE B-4 SAE C-4 NEA 56C NEA 182TC INUT BUSIN SIZES.625 IA. - 3/16 X 3/32 KW IA. - 1/4 X 1/8 KW 1-6B SLINE 14T - 12/24.. SLINE.875 IA. - 3/16 X 3/32 KW IA. - 1/4 X 1/8 KW 9T - 16/32.. SLINE 15T - 16/32.. SLINE IA. - 1/4 X 1/8 KW IA. - 5/16 X 1/8 KW 13T - 16/32.. SLINE 21T - 16/32.. SLINE Single Reduction LANE E COUNTERBORE (QTY) J B.C. IA. OLES K A-2 1-7/ / /16 7/16 (2) 3/8 NC 4-3/16 6-7/8 5-1/4 A-2CL 1-7/ / /16 7/16 (2) 1/2 NC 4-3/16 6-7/8 5-1/4 A-2CL / / /32 51/64 (2) 1/2 NC 4-3/16 5-1/2 5-1/2 B-2 1-7/ / /32 7/16 (2) 1/2 NC 5-3/4 6-7/8 5-1/4 B-4 1-7/ / /16 7/16 (4) 1/2 NC 5 6-1/16 6-1/16 C-2 1-7/ / /32 7/8 (2) 5/8 NC 7-1/8 8-1/2 5-15/16 C-4 1-7/ / /32 7/8 (4) 1/2 NC 6-3/8 6-1/16 6-1/16 56C 1-5/ / /16 5/8 (4) 13/32 IA. 5-7/8 6-9/ TC 2-7/ / /16 1-7/16 (4) 17/32 IA. 7-1/4 9-1/

22 UB CITY ARALLEL SAT RIVES odel 95 - Single Reduction eatures Rugged cast iron housing designed for rigid gear and bearing support. Alloy shafting and sleeves for greater strength. Tapered roller bearings on all shafts. Choice of four (4) standard gear ratios. eat treated alloy steel gearing for strength and long wear life. elical gears for greater strength and lower noise level. eavy-duty industrial seals to keep lubricant in and dirt out. Shaft mount design for direct mounting on the drive shaft of equipment to be driven. UB CITY lubricant recommended. (Refer to Section R) Unit may be operated as a speed increaser or speed reducer. Rating Tables -22 SINLE REUCTION UNITS ROVIE OOSITE IRECTION OUTUT ROTATION SEE REUCER RATIOS Input R 2.07:1 3.05:1 3.94:1 4.93:1 INUT ORSEOWER OUTUT R OUTUT TORQUE IN. LBS INUT ORSEOWER OUTUT R OUTUT TORQUE IN. LBS INUT ORSEOWER OUTUT R OUTUT TORQUE IN. LBS INUT ORSEOWER OUTUT R OUTUT TORQUE IN. LBS INUT ORSEOWER OUTUT R OUTUT TORQUE IN. LBS SEE INCREASER RATIOS Input R 1:2.07 1:3.05 1:3.94 1:4.93 INUT ORSEOWER OUTUT R 2069 OUTUT TORQUE IN. LBS INUT ORSEOWER OUTUT R OUTUT TORQUE IN. LBS INUT ORSEOWER OUTUT R OUTUT TORQUE IN. LBS INUT ORSEOWER OUTUT R OUTUT TORQUE IN. LBS INUT ORSEOWER OUTUT R OUTUT TORQUE IN. LBS

23 UB CITY ARALLEL SAT RIVES odel 95 - Single Reduction 3-3/8 4-7/16 1-1/16 SAE B2 LANE SOWN. SEE BELOW OR SIZES AN IENSIONS OR AVAILABLE LANES. 2-1/2 15-3/ C.. 7/8 1-3/8 3/8 X 3/16 KEYWAY 5/16 IA. BOLT / /32 1/8 NT (2) 1 3/8 NT (2) 3/4 TY. 3/8 7-9/32 (5-3/4 SLINE SLEEVES) 29/64 IA. OLE 1 R 1-9/ OR LUBRICATION AN INSTALLATION INSTRUCTIONS - REER TO SECTION R E IENSIONS SOWN ARE OR REERENCE ONLY. CERTIIE RINTS ARE AVAILABLE UON REQUEST. SEE CART OR (QTY) J OLES ON K B.C. OR EAC LANE SIZE SAT OUNTE UNITS REQUIRE TORQUE ARS. TORQUE AR KITS ARE AVAILABLE SEE AE -51. AITIONAL RATIOS, OUTUT BORES AN INUT BORES ARE AVAILABLE CONSULT ACTORY. Single Reduction 1-3/8 SAE B-2 SAE C-2 SAE C-4 RY SIIN WEIT 95 LBS. INUT BUSIN SIZES IA. - 1/4 X 1/8 KW IA. - 5/16 X 1/8 KW 13T - 16/32.. SLINE 21T - 16/32.. SLINE IA. - 1/4 X 1/8 KW 1-6B SLINE 14T - 12/24.. SLINE IA. - 1/4 X 1/8 KW 9T - 16/32.. SLINE 15T - 16/32.. SLINE LANE E COUNTERBORE (QTY) J B.C. IA. OLES K B-2 1-5/ / /32 33/64 (2) 1/2 NC 5-3/4 6-7/8 5-1/4 C-2 1-3/ / /32 61/64 (2) 5/8 NC 7-1/8 8-1/2 5-15/16 C-4 1-3/ / /32 61/64 (4) 1/2 NC 6-3/8 6-1/16 6-1/16-23

24 UB CITY ARALLEL SAT RIVES odel Single Reduction eatures Rugged cast iron housing designed for rigid gear and bearing support. Tapered roller bearings for endurance and strength. Choice of six (6) standard gear ratios. Case carburized alloy steel gearing for strength and long wear life. elical gears for greater strength and lower noise level. eavy-duty industrial seals to keep lubricant in and dirt out. eat treated alloy steel shafting for greater strength and wear resistance. Rating Table SINLE REUCTION UNITS ROVIE OOSITE IRECTION OUTUT ROTATION RATIOS INUT 1:1 1.5:1 2:1 3:1 4:1 5:1 R ELICAL ELICAL ELICAL ELICAL ELICAL ELICAL INUT ORSEOWER OUTUT R OUTUT TORQUE IN. LBS (*) INUT O..L (*) OUTUT O..L INUT ORSEOWER OUTUT R OUTUT TORQUE IN. LBS (*) INUT O..L (*) OUTUT O..L INUT ORSEOWER OUTUT R OUTUT TORQUE IN. LBS (*) INUT O..L (*) OUTUT O..L INUT ORSEOWER I OUTUT R OUTUT TORQUE IN. LBS (*) INUT O..L (*) OUTUT O..L INUT ORSEOWER OUTUT R OUTUT TORQUE IN. LBS (*) INUT O..L (*) OUTUT O..L INUT ORSEOWER OUTUT R OUTUT TORQUE IN. LBS (*) INUT O..L (*) OUTUT O..L INUT ORSEOWER OUTUT R OUTUT TORQUE IN. LBS (*) INUT O..L (*) OUTUT O..L WR 2 Referred I SEE SAT to: (LBS.IN 2 ) LOW SEE SAT (*) OVERUN LOA (LBS) AT CENTER O SAT EXTENSIONS -24

25 Single Reduction UB CITY ARALLEL SAT RIVES odel Single Reduction 8-1/2 1-9/16 TY. 5-3/16 TY /2 4-31/32 C 1.13 TY TY. UB CITY 3-27/32 5-1/8 A 26-7/16 B &W KEYWAY 5/8 x 5/16 &W KEYWAY 8-3/4 TY C / /2 TY. 4-7/8 TY. 2-1/2 TY. 4-13/ / /2 1/2NC X 5/8 L SETSCREWS (4) URNISE 5/8 x 5/16 KEYWAY /2 NT (8) 3/4 NT (6) 3 TY. 6-1/2 TY. (2) 5/8-11 NC X 1 EE TY. (4) LCS I SEE SAT IENSIONS RATIO A B C 1:1, 1.5:1, 2:1 & 3: / /8 X 5/ /16 4:1 & 5: / /8 X 3/16 4-1/4 9-1/32 STYLE SO BORE IENSIONS Standard Styles Available OR LUBRICATION AN INSTALLATION INSTRUCTIONS - REER TO SECTION R RY SIIN WEIT 335 LBS. IENSIONS SOWN ARE OR REERENCE ONLY. CERTIIE RINTS ARE AVAILABLE UON REQUEST. Δ INICATES I SEE SAT. OTER STYLES AVAILABLE. STYLE A STYLE C STYLE O STYLE SO CONSULT ACTORY OR VERTICAL SAT LUBRICATION RECOENATIONS INUT SAT CAN BE ROTATE IN EITER IRECTION -25

26 UB CITY ARALLEL SAT RIVES odel 52 - ouble Reduction eatures Rugged cast iron housing designed for rigid gear and bearing support. Alloy shafting and sleeves for greater strength. Ball bearings on all shafts. Choice of three (3) standard gear ratios. eat treated alloy steel gearing for strength and long wear life. eavy-duty industrial seals to keep lubricant in and dirt out. Shaft mount design for direct mounting on the drive shaft of equipment to be driven. UB CITY lubricant recommended. (Refer to Section R) OUBLE REUCTION UNITS ROVIE SAE IRECTION OUTUT ROTATION Rating Table RATIOS Input R 15.69: : : INUT ORSEOWER OUTUT R OUTUT TORQUE IN. LBS INUT ORSEOWER OUTUT R OUTUT TORQUE IN. LBS INUT ORSEOWER OUTUT R OUTUT TORQUE IN. LBS INUT ORSEOWER OUTUT R OUTUT TORQUE IN. LBS INUT ORSEOWER OUTUT R OUTUT TORQUE IN. LBS

27 UB CITY ARALLEL SAT RIVES odel 52 - ouble Reduction 3-27/32 11/16 TY. 9/32 3-9/16 1-3/4 3/16 X 3/32 KEYWAY 1-1/4 E. LT. 5/8 R 21/64 RILL 2-1/2 45 TY /4 NT (8) 1-7/ C.. 2-1/2 TY. 1-15/16 TY. 11-1/32 1/2 1/4 X 1/16 KEYWAY C.. 4-5/8 TY. 3-7/16 2-1/4 TY. 2-7/16 TY. 4-13/16 IENSIONS SOWN ARE OR REERENCE ONLY. CERTIIE RINTS ARE AVAILABLE UON REQUEST. 3/8 TY. 6-3/4 3-3/8 E SEE CART OR (QTY) J OLES ON K B.C. OR EAC LANE SIZE SAT OUNTE UNITS REQUIRE TORQUE ARS. TORQUE AR KITS ARE AVAILABLE SEE AE /32 LANE E SAE B-2 SAE A-2 SAE A-2CL NEA 56C NEA 143TC INUT BUSIN SIZES.625 IA. - 3/16 X 3/32 KW.875 IA. - 3/16 X 3/32 KW 1-6B SLINE COUNTERBORE (QTY) J B.C. IA. OLES K AITIONAL RATIOS, OUTUT BORES AN INUT BORES ARE AVAILABLE CONSULT ACTORY. OR LUBRICATION AN INSTALLATION INSTRUCTIONS - REER TO SECTION R RY SIIN WEIT 25 LBS. A-2 1-1/ / /16 19/32 (2) 3/8 NC 4-3/16 4-1/2 4-1/2 A-2CL 1-3/ / /16 19/32 (2) 1/2 NC 4-3/16 4-1/2 4-1/2 B-2 1-5/ / /16 3/4 (2) 1/2 NC 5-3/4 6-7/8 5-1/4 56C / /16 1-7/32 (4) 13/32 IA. 5-7/8 6-1/2 -- ouble Reduction -27

28 UB CITY ARALLEL SAT RIVES odels 83L & 83S - ouble Reduction eatures Rugged cast iron housing designed for rigid gear and bearing support. Alloy shafting and sleeves for greater strength. Ball bearings on all shafts. Choice of four (4) standard gear ratios. eat treated alloy steel gearing for strength and long wear life. eavy-duty industrial seals to keep lubricant in and dirt out. Shaft mount design for direct mounting on the drive shaft of equipment to be driven. UB CITY lubricant recommended. (Refer to Section R) OUBLE REUCTION UNITS ROVIE SAE IRECTION OUTUT ROTATION Rating Table RATIOS Input R 6.09:1 8.14: : : INUT ORSEOWER OUTUT R OUTUT TORQUE IN. LBS INUT ORSEOWER OUTUT R OUTUT TORQUE IN. LBS INUT ORSEOWER OUTUT R OUTUT TORQUE IN. LBS INUT ORSEOWER OUTUT R OUTUT TORQUE IN. LBS INUT ORSEOWER OUTUT R OUTUT TORQUE IN. LBS

29 UB CITY ARALLEL SAT RIVES odels 83L & 83S - ouble Reduction 11/32 2-9/32 4-7/ / /16 1/4 X 1/8 KEYWAY 2 E. LT C.. 3/4 TY. 3-3/4 2-7/8 3/8 X 3/16 KEYWAY 2-1/4 E. LT. 29/64 RILL 3/4 R /16 5-9/32 STYLE O OEL 83SS SAT OUTUT STYLES AVAILABLE 14-3/8 5/8 3/8 X 1/8 KEYWAY C.. 2-1/2 TY. 2-7/16 TY. 4-15/32 1/8 NT (8) 3/8 NT (4) 5-7/8 E 7/8 TY. 5/16 IA. BOLT LANE INUT OELS AVE (6) 1/8 NT (INUT SIE OUSIN OES NOT AVE (2) ON OUTSIE EE). 1-13/16 TY. IENSIONS SOWN ARE OR REERENCE ONLY. CERTIIE RINTS ARE AVAILABLE UON REQUEST. OR LUBRICATION AN INSTALLATION INSTRUCTIONS - REER TO SECTION R RY SIIN WEIT 60 LBS. 8-15/ /32 Optional Output Bore: 1-1/4 with 1/4 X 1/8 Keyway SAT OUNTE UNITS REQUIRE TORQUE ARS. TORQUE AR KITS ARE AVAILABLE SEE AE -51. AITIONAL RATIOS, OUTUT BORES AN INUT BORES ARE AVAILABLE CONSULT ACTORY. STYLE A STYLE C 1-3/8 LANE E SAE A-2 SAE A-2CL SAE B-2 SAE A-2CL2000 SAE B-4 NEA 56C NEA 182TC SEE CART OR (QTY) J OLES ON K B.C. OR EAC LANE SIZE INUT BUSIN SIZES.625 IA. - 3/16 X 3/32 KW IA. - 1/4 X 1/8 KW 1-6B SLINE 14T - 12/24.. SLINE.875 IA. - 3/16 X 3/32 KW IA. - 1/4 X 1/8 KW 9T - 16/32.. SLINE 15T - 16/32.. SLINE IA. - 1/4 X 1/8 KW IA. - 5/16 X 1/8 KW 13T - 16/32.. SLINE 21T - 16/32.. SLINE COUNTERBORE (QTY) J B.C. IA. OLES K A-2 1-7/ / /16 7/16 (2) 3/8 NC 4-3/16 5-1/8 4-1/16 A-2CL 1-7/ / /16 7/16 (2) 1/2 NC 4-3/16 5-1/8 4-1/16 A-2CL / / /32 51/64 (2) 1/2 NC 4-3/16 5-1/2 5-1/2 B-2 1-7/ / /16 7/16 (2) 1/2 NC 5-3/4 6-7/8 5-1/4 B-4 1-7/ / /16 7/16 (4) 1/2 NC 5 5-1/8 5-1/8 56C 1-5/ / /16 5/8 (4) 13/32 IA. 5-7/8 6-9/ TC 2-7/ / /16 1-7/16 (4) 17/32 IA. 7-1/4 9-1/8 -- ouble Reduction -29

30 UB CITY ARALLEL SAT RIVES odel 89 - ouble Reduction eatures Rugged cast iron housing designed for rigid gear and bearing support. Alloy shafting and sleeves for greater strength. Ball bearings on all shafts. Choice of four (4) standard gear ratios. eat treated alloy steel gearing for strength and long wear life. eavy-duty industrial seals to keep lubricant in and dirt out. Shaft mount design for direct mounting on the drive shaft of equipment to be driven. UB CITY lubricant recommended. (Refer to Section R) OUBLE REUCTION UNITS ROVIE SAE IRECTION OUTUT ROTATION Rating Table RATIOS Input R 6.02:1 8.58: : : INUT ORSEOWER OUTUT R OUTUT TORQUE IN. LBS INUT ORSEOWER OUTUT R OUTUT TORQUE IN. LBS INUT ORSEOWER OUTUT R OUTUT TORQUE IN. LBS INUT ORSEOWER OUTUT R OUTUT TORQUE IN. LBS INUT ORSEOWER OUTUT R OUTUT TORQUE IN. LBS

31 UB CITY ARALLEL SAT RIVES odel 89 - ouble Reduction 1/2 5-3/8 4-15/16 1 TY. 3-23/32 5/16 X 5/32 KEYWAY 2-7/8 E. LT. 15/16 TY. 4-1/4 29/64 IA. OLE /8 R 1/4 NT (8) C /16 TY. 3-1/4 TY. 15-5/16 7/ /8 X 1/8 KEYWAY C.. 3-3/8 TY. 4-13/16 TY. 8-3/4 4-3/8 3-1/4 TY. 1-3/8 LANE 6-13/16 LANE INUT OELS AVE (4) 1/4 NT IN OUSIN AL OOSITE INUT ONLY. IENSIONS SOWN ARE OR REERENCE ONLY. CERTIIE RINTS ARE AVAILABLE UON REQUEST. E E SAE A-2 SAE A-2CL SAE B-2 SAE C-2 SAE B-4 SAE C-4 NEA 56C NEA 182TC 1 TY. 8-3/4 SEE CART OR (QTY) J OLES ON K B.C. OR EAC LANE SIZE INUT BUSIN SIZES.625 IA. - 3/16 X 3/32 KW IA. - 1/4 X 1/8 KW 1-6B SLINE 14T - 12/24.. SLINE.875 IA. - 3/16 X 3/32 KW IA. - 1/4 X 1/8 KW 9T - 16/32.. SLINE 15T - 16/32.. SLINE IA. - 1/4 X 1/8 KW IA. - 5/16 X 1/8 KW 13T - 16/32.. SLINE 21T - 16/32.. SLINE COUNTERBORE (QTY) J B.C. IA. OLES K A-2 1-7/ / /16 7/16 (2) 3/8 NC 4-3/16 5-1/8 4-1/16 A-2CL 1-7/ / /16 7/16 (2) 1/2 NC 4-3/16 5-1/8 4-1/16 B-2 1-7/ / /16 7/16 (2) 1/2 NC 5-3/4 6-7/8 5-1/4 B-4 1-7/ / /16 7/16 (4) 1/2 NC 5 5-1/8 5-1/8 C-2 1-7/ / /32 31/32 (2) 5/8 NC 7-1/8 8-1/2 5-15/16 C-4 1-7/ / /32 31/32 (4) 1/2 NC 6-3/8 6-1/16 6-1/16 56C 1-5/ / /16 5/8 (4) 13/32 IA. 5-7/8 6-9/ TC 2-7/ / /16 1-7/16 (4) 17/32 IA. 7-1/4 9-1/ /8 SAT OUNTE UNITS REQUIRE TORQUE ARS. TORQUE AR KITS ARE AVAILABLE SEE AE -51. AITIONAL RATIOS, OUTUT BORES AN INUT BORES ARE AVAILABLE CONSULT ACTORY. OR LUBRICATION AN INSTALLATION INSTRUCTIONS - REER TO SECTION R RY SIIN WEIT 70 LBS. -31 ouble Reduction

32 UB CITY ARALLEL SAT RIVES odel 1 - ouble Reduction eatures Rugged cast iron housing designed for rigid gear and bearing support. Alloy shafting and sleeves for greater strength. Ball bearings on all shafts. Choice of five (5) standard gear ratios. eat treated alloy steel gearing for strength and long wear life. eavy-duty industrial seals to keep lubricant in and dirt out. Shaft mount design for direct mounting on the drive shaft of equipment to be driven. UB CITY lubricant recommended. (Refer to Section R) OUBLE REUCTION UNITS ROVIE SAE IRECTION OUTUT ROTATION Rating Table RATIOS Input R 10.37: : : : : INUT ORSEOWER OUTUT R OUTUT TORQUE IN. LBS INUT ORSEOWER OUTUT R OUTUT TORQUE IN. LBS INUT ORSEOWER OUTUT R OUTUT TORQUE IN. LBS INUT ORSEOWER OUTUT R OUTUT TORQUE IN. LBS INUT ORSEOWER OUTUT R OUTUT TORQUE IN. LBS

33 UB CITY ARALLEL SAT RIVES odel 1 - ouble Reduction 7/16 5/8 4-11/16 4-1/4 2-17/32 3/16 X 3/32 KEYWAY 2 E. LT. 1-1/8 4-3/32 29/64 IA. OLE 2-9/ /4 R C.. 7-5/ /32 5/8 1/2 X 1/8 KEYWAY C.. 4-7/ /2 1-1/16 1-1/ /32 5/16 IA. BOLT 1-1/8 5-3/4 1/4 NT (5) IENSIONS SOWN ARE OR REERENCE ONLY. CERTIIE RINTS ARE AVAILABLE UON REQUEST. 9-1/16 3/4 4-17/32 SEE CART OR (QTY) J OLES ON K B.C. E OR EAC LANE SIZE SAT OUNTE UNITS REQUIRE TORQUE ARS. TORQUE AR KITS ARE AVAILABLE SEE AE -51. AITIONAL RATIOS, OUTUT BORES AN INUT BORES ARE AVAILABLE CONSULT ACTORY. 1-15/32 LANE E SAE B-2 SAE A-2 SAE A-2CL INUT BUSIN SIZES.625 IA. - 3/16 X 3/32 KW.875 IA. - 3/16 X 3/32 KW IA. - 1/4 X 1/8 KW 1-6B SLINE COUNTERBORE (QTY) J B.C. IA. OLES K A-2 1-3/ / /16 15/32 (2) 3/8 NC 4-3/16 5-1/2 5-1/2 A-2CL 1-3/ / /16 15/32 (2) 1/2 NC 4-3/16 5-1/2 5-1/2 B-2 1-7/ / /16 19/32 (2) 1/2 NC 5-3/4 6-7/8 5-1/4 B-4 1-7/ / /16 19/32 (4) 1/2 NC 5 6-1/8 6-1/8 56C / /16 23/32 (4) 13/32 IA. 5-7/8 6-1/2 -- SAE B-4 NEA 56C RY SIIN WEIT 60 LBS. OR LUBRICATION AN INSTALLATION INSTRUCTIONS - REER TO SECTION R -33 ouble Reduction

34 UB CITY ARALLEL SAT RIVES odel 2 - ouble Reduction eatures Rugged cast iron housing designed for rigid gear and bearing support. Alloy shafting and sleeves for greater strength. Ball bearings on all shafts. Choice of eight (8) standard gear ratios. eat treated alloy steel gearing for strength and long wear life. eavy-duty industrial seals to keep lubricant in and dirt out. Shaft mount design for direct mounting on the drive shaft of equipment to be driven. UB CITY lubricant recommended. (Refer to Section R) OUBLE REUCTION UNITS ROVIE SAE IRECTION OUTUT ROTATION Rating Table RATIOS Input R 5.00: : : : : : : : INUT ORSEOWER OUTUT R OUTUT TORQUE IN. LBS INUT ORSEOWER OUTUT R OUTUT TORQUE IN. LBS INUT ORSEOWER OUTUT R OUTUT TORQUE IN. LBS INUT ORSEOWER OUTUT R OUTUT TORQUE IN. LBS INUT ORSEOWER OUTUT R OUTUT TORQUE IN. LBS

35 UB CITY ARALLEL SAT RIVES 5-11/32 odel 2 - ouble Reduction 3/8 NT (4) 7/ /32 3 1/4 X 1/8 KEYWAY 2 E. LT. 7/8 TY. 4 29/64 IA. OLE 3/4 R 2-9/ C.. 1-5/8 1-5/8 9-9/16 5/8 15-1/16 1/2 X 3/16 KEYWAY C.. 4-5/16 TY /16 1/8 NT (4) 1-3/8 SEE CART OR (QTY) J OLES ON K B.C. E OR EAC LANE SIZE 6-3/8 7/8 TY. IENSIONS SOWN ARE OR REERENCE ONLY. CERTIIE RINTS ARE AVAILABLE UON REQUEST. LANE E SAE A-2 SAE A-2CL SAE B-2 SAE A-2CL2000 SAE B-4 NEA 56C NEA 182TC 2-5/8 2-5/8 9-3/4 4-7/8 5/16 IA. BOLT INUT BUSIN SIZES.625 IA. - 3/16 X 3/32 KW IA. - 1/4 X 1/8 KW 1-6B SLINE 14T - 12/24.. SLINE.875 IA. - 3/16 X 3/32 KW IA. - 1/4 X 1/8 KW 9T - 16/32.. SLINE 15T - 16/32.. SLINE IA. - 1/4 X 1/8 KW IA. - 5/16 X 1/8 KW 13T - 16/32.. SLINE 21T - 16/32.. SLINE COUNTERBORE (QTY) J B.C. IA. OLES K SAT OUNTE UNITS REQUIRE TORQUE ARS. TORQUE AR KITS ARE AVAILABLE SEE AE -51. AITIONAL RATIOS, OUTUT BORES AN INUT BORES ARE AVAILABLE CONSULT ACTORY. OR LUBRICATION AN INSTALLATION INSTRUCTIONS - REER TO SECTION R RY SIIN WEIT 80 LBS. A-2 1-7/ / /16 7/16 (2) 3/8 NC 4-3/16 5-1/8 4-1/16 A-2CL 1-7/ / /16 7/16 (2) 1/2 NC 4-3/16 5-1/8 4-1/16 A-2CL / / /32 51/64 (2) 1/2 NC 4-3/16 5-1/2 5-1/2 B-2 1-7/ / /16 7/16 (2) 1/2 NC 5-3/4 6-7/8 5-1/4 B-4 1-7/ / /16 7/16 (4) 1/2 NC 5 5-1/8 5-1/8 56C 1-5/ / /16 5/8 (4) 13/32 IA. 5-7/8 6-9/ TC 2-7/ / /16 1-7/16 (4) 17/32 IA. 7-1/4 9-1/ ouble Reduction

36 UB CITY ARALLEL SAT RIVES odel 3 - ouble Reduction eatures Rugged cast iron housing designed for rigid gear and bearing support. Alloy shafting and sleeves for greater strength. Ball bearings on all shafts. Choice of eight (8) standard gear ratios. eat treated alloy steel gearing for strength and long wear life. eavy-duty industrial seals to keep lubricant in and dirt out. Shaft mount design for direct mounting on the drive shaft of equipment to be driven. UB CITY lubricant recommended. (Refer to Section R) OUBLE REUCTION UNITS ROVIE SAE IRECTION OUTUT ROTATION Rating Table RATIOS Input R 4.92: : : : : : : : INUT ORSEOWER OUTUT R OUTUT TORQUE IN. LBS INUT ORSEOWER OUTUT R OUTUT TORQUE IN. LBS INUT ORSEOWER OUTUT R OUTUT TORQUE IN. LBS INUT ORSEOWER OUTUT R OUTUT TORQUE IN. LBS INUT ORSEOWER OUTUT R OUTUT TORQUE IN. LBS

37 UB CITY ARALLEL SAT RIVES 1/2 3/8 NT (8) 5-7/8 5-3/8 3 odel 3 - ouble Reduction 5/16 X 5/32 KEYWAY 2 E. LT. 4-1/2 29/64 IA. OLE 1 R 3-1/ C /32 3/4 18-1/4 5/8 X 3/16 KEYWAY C / /16 1/8 NT (4) 1-3/8 E SEE CART OR (QTY) J OLES ON K B.C. OR EAC LANE SIZE 7-1/8 7/8 TY. IENSIONS SOWN ARE OR REERENCE ONLY. CERTIIE RINTS ARE AVAILABLE UON REQUEST. SAE A-2 SAE A-2CL SAE B-2 SAE C-2 LANE INUT OELS AVE (4) 3/8 NT IN OUSIN AL OOSITE INUT ONLY. SAE A-2CL2000 SAE B-4 SAE C-4 1-1/32 TY. NEA 56C NEA 143TC NEA 182TC 11-3/4 5-7/8 5/16 IA. BOLT OR LUBRICATION AN INSTALLATION INSTRUCTIONS - REER TO SECTION R SAT OUNTE UNITS REQUIRE TORQUE ARS. TORQUE AR KITS ARE AVAILABLE SEE AE -51. AITIONAL RATIOS, OUTUT BORES AN INUT BORES ARE AVAILABLE CONSULT ACTORY. RY SIIN WEIT 120 LBS. LANE E INUT BUSIN SIZES.625 IA. - 3/16 X 3/32 KW IA. - 1/4 X 1/8 KW 1-6B SLINE 14T - 12/24.. SLINE.875 IA. - 3/16 X 3/32 KW IA. - 1/4 X 1/8 KW 9T - 16/32.. SLINE 15T - 16/32.. SLINE IA. - 1/4 X 1/8 KW IA. - 5/16 X 1/8 KW 13T - 16/32.. SLINE 21T - 16/32.. SLINE COUNTERBORE (QTY) J B.C. IA. OLES K A-2 1-7/ / /16 7/16 (2) 3/8 NC 4-3/16 5-1/8 4-1/16 A-2CL 1-7/ / /16 7/16 (2) 1/2 NC 4-3/16 5-1/8 4-1/16 A-2CL / / /32 51/64 (2) 1/2 NC 4-3/16 5-1/2 5-1/2 B-2 1-7/ / /16 7/16 (2) 1/2 NC 5-3/4 6-7/8 5-1/4 B-4 1-7/ / /16 7/16 (4) 1/2 NC 5 5-1/8 5-1/8 C-2 1-7/ / /32 7/8 (2) 5/8 NC 7-1/8 8-1/2 6-1/8 C-4 1-7/ / /32 7/8 (4) 1/2 NC 6-3/8 6-1/16 6-1/16 56C 1-5/ / /16 5/8 (4) 13/32 IA. 5-7/8 6-9/ TC 1-5/ / /16 5/8 (4) 13/32 IA. 5-7/8 6-9/ TC 2-7/ / /16 1-7/16 (4) 17/32 IA. 7-1/4 9-1/8 -- ouble Reduction -37

38 UB CITY ARALLEL SAT RIVES odel 4 - ouble Reduction eatures Rugged cast iron housing designed for rigid gear and bearing support. Alloy shafting and sleeves for greater strength. Ball bearings on high speed shaft. Tapered roller bearings on low speed shaft. Choice of seven (7) standard gear ratios. eat treated alloy steel gearing for strength and long wear life. eavy-duty industrial seals to keep lubricant in and dirt out. Shaft mount design for direct mounting on the drive shaft of equipment to be driven. UB CITY lubricant recommended. (Refer to Section R) OUBLE REUCTION UNITS ROVIE SAE IRECTION OUTUT ROTATION Rating Table RATIOS Input R 5.02:1 7.99: : : : : : INUT ORSEOWER OUTUT R OUTUT TORQUE IN. LBS INUT ORSEOWER OUTUT R OUTUT TORQUE IN. LBS INUT ORSEOWER OUTUT R OUTUT TORQUE IN. LBS INUT ORSEOWER OUTUT R OUTUT TORQUE IN. LBS INUT ORSEOWER OUTUT R OUTUT TORQUE IN. LBS

39 UB CITY ARALLEL SAT RIVES odel 4 - ouble Reduction 1/2 5-19/ / /32 1/4 X 1/8 KEYWAY 3-1/4 E. LT. 2-1/2 5-1/4 29/64 IA. OLE 1-1/8 R / C.. 1/ /16 3/ / C.. 3/4 X 3/16 KEYWAY TY. 3-1/4 6 7/8 5/16 IA. BOLT 1-3/8 3/8 NT (6) LANE E SEE CART OR (QTY) J OLES ON K B.C. OR EAC LANE SIZE E 7-5/8 SAE A-2 SAE A-2CL SAE A-2CL2000 SAE B-2 SAE C-2 SAE B-4 SAE C-4 NEA 56C NEA 182TC 1/8 NT (4) 6 1 TY. IENSIONS SOWN ARE OR REERENCE ONLY. CERTIIE RINTS ARE AVAILABLE UON REQUEST. INUT BUSIN SIZES.625 IA. - 3/16 X 3/32 KW IA. - 1/4 X 1/8 KW 1-6B SLINE 14T - 12/24.. SLINE.875 IA. - 3/16 X 3/32 KW IA. - 1/4 X 1/8 KW 9T - 16/32.. SLINE 15T - 16/32.. SLINE IA. - 1/4 X 1/8 KW IA. - 5/16 X 1/8 KW 13T - 16/32.. SLINE 21T - 16/32.. SLINE COUNTERBORE (QTY) J B.C. IA. OLES K A-2 1-1/ / /16 51/64 (2) 3/8 NC 4-3/16 6-7/8 5-1/4 A-2CL 1-1/ / /16 51/64 (2) 1/2 NC 4-3/16 6-7/8 5-1/4 A-2CL / / /16 51/64 (2) 1/2 NC 4-3/16 6-7/8 5-1/4 B-2 1-1/ / /16 51/64 (2) 1/2 NC 5-3/4 6-7/8 5-1/4 B-4 1-1/ / /16 51/64 (4) 1/2 NC 5 5-1/8 5-1/8 C-2 1-1/ / /16 51/64 (2) 5/8 NC 7-1/8 8-1/2 6-1/8 C-4 1-1/ / /16 51/64 (4) 1/2 NC 6-3/8 6-1/8 6-1/8 56C / / /64 (4) 13/32 IA. 5-7/8 6-9/ TC 2-9/ / /16 2-7/64 (4) 17/32 IA. 7-1/4 9-1/ SAT OUNTE UNITS REQUIRE TORQUE ARS. TORQUE AR KITS ARE AVAILABLE SEE AE -51. AITIONAL RATIOS, OUTUT BORES AN INUT BORES ARE AVAILABLE CONSULT ACTORY. OR LUBRICATION AN INSTALLATION INSTRUCTIONS - REER TO SECTION R RY SIIN WEIT 130 LBS. -39 ouble Reduction

40 UB CITY ARALLEL SAT RIVES odel 5 - ouble Reduction eatures Rugged cast iron housing designed for rigid gear and bearing support. Alloy shafting and sleeves for greater strength. Ball bearings on all shafts. Choice of seven (7) standard gear ratios. eat treated alloy steel gearing for strength and long wear life. eavy-duty industrial seals to keep lubricant in and dirt out. Shaft mount design for direct mounting on the drive shaft of equipment to be driven. UB CITY lubricant recommended. (Refer to Section R) OUBLE REUCTION UNITS ROVIE SAE IRECTION OUTUT ROTATION Rating Table RATIOS Input R 5.04: : : : : : : INUT ORSEOWER OUTUT R OUTUT TORQUE IN. LBS INUT ORSEOWER OUTUT R OUTUT TORQUE IN. LBS INUT ORSEOWER OUTUT R OUTUT TORQUE IN. LBS INUT ORSEOWER OUTUT R OUTUT TORQUE IN. LBS INUT ORSEOWER OUTUT R OUTUT TORQUE IN. LBS BORE TOLERANCE NOINAL

41 UB CITY ARALLEL SAT RIVES 7-7/8 odel 5 - ouble Reduction 5/8 7-1/ /2 6-5/8 3-7/8 4 1/2 X 1/4 &W KEYWAY 41/64 IA. OLE 1-1/4 R C.. 4 1/2 NT (7) 14-1/4 24-5/ C.. 13/16 7/8 X 1/4 KEYWAY 4-29/ / /4 TY. SAT OUNTE UNITS REQUIRE TORQUE ARS. TORQUE AR KITS ARE AVAILABLE SEE AE -51. E 9-3/16 1-1/4 TY. SEE CART OR (QTY) J OLES ON K B.C. OR EAC LANE SIZE 16-1/8 1-1/2 8-1/16 IENSIONS SOWN ARE OR REERENCE ONLY. CERTIIE RINTS ARE AVAILABLE UON REQUEST. AITIONAL RATIOS, OUTUT BORES AN INUT BORES ARE AVAILABLE CONSULT ACTORY. OR LUBRICATION AN INSTALLATION INSTRUCTIONS - REER TO SECTION R RY SIIN WEIT 360 LBS. 1-3/8 LANE E SAE C-2 SAE B-2 SAE B-4 SAE A-2 SAE A-2CL SAE A-2CL2000 SAE A-4CL SAE C-4 SAE -4 COUNTERBORE (QTY) J B.C. IA. OLES K NEA 182TC INUT BUSIN SIZES IA. - 1/4 X 1/8 KW IA. - 5/16 X 1/8 KW 13T - 16/32.. SLINE 21T - 16/32.. SLINE IA. - 1/4 X 1/8 KW 1-6B SLINE 14T - 12/24.. SLINE IA. - 1/4 X 1/8 KW 9T - 16/32.. SLINE 15T - 16/32.. SLINE A-2 1-3/ / /16 53/64 (2) 3/8 NC 4-3/16 6-1/16 6-1/16 A-2CL 1-3/ / /16 53/64 (2) 1/2 NC 4-3/16 6-1/16 6-1/16 A-2CL / / /16 53/64 (2) 1/2 NC 4-3/16 6-1/16 6-1/16 A-4CL 1-3/ / /16 53/64 (4) 1/2 NC 4-3/16 6-1/16 6-1/16 B-2 1-3/ / /16 53/64 (2) 1/2 NC 5-3/4 6-1/16 6-1/16 B-4 1-3/ / /16 53/64 (4) 1/2 NC 5 6-1/16 6-1/16 C-2 1-1/ / /16 31/32 (2) 5/8 NC 7-1/8 8-1/2 6-1/8 C-4 1-1/ / /16 31/32 (4) 1/2 NC 6-3/8 6-1/16 6-1/ / / /16 31/32 (4) 3/4 NC TC 2-7/ / / /64 (4) 17/32 IA. 7-1/4 9-1/8 ouble Reduction -41

42 UB CITY ARALLEL SAT RIVES odel 6 - ouble Reduction eatures Rugged cast iron housing designed for rigid gear and bearing support. Alloy shafting and sleeves for greater strength. Tapered roller bearings on all shafts. Choice of seven (7) standard gear ratios. eat treated alloy steel gearing for strength and long wear life. eavy-duty industrial seals to keep lubricant in and dirt out. Shaft mount design for direct mounting on the drive shaft of equipment to be driven. UB CITY lubricant recommended. (Refer to Section R) OUBLE REUCTION UNITS ROVIE SAE IRECTION OUTUT ROTATION Rating Table RATIOS Input R 5.16: : : : : : : INUT ORSEOWER OUTUT R OUTUT TORQUE IN. LBS INUT ORSEOWER OUTUT R OUTUT TORQUE IN. LBS INUT ORSEOWER OUTUT R OUTUT TORQUE IN. LBS INUT ORSEOWER OUTUT R OUTUT TORQUE IN. LBS INUT ORSEOWER OUTUT R OUTUT TORQUE IN. LBS

43 UB CITY ARALLEL SAT RIVES odel 6 - ouble Reduction 9-1/4 3/4 8 1 TY. 4-1/2 4-15/32 1-1/2 6-1/8 21/32 IA. OLE 1-1/2 R 5 4 5/8 X 5/16 &W KEYWAY C /32 1/2 NT (5) 30-3/ C X 1/4 KEYWAY 6-3/4 TY /2 1-31/32 1-7/32 E LANE SEE CART OR (QTY) J OLES ON K B.C. OR EAC LANE SIZE E 11-1/4 SAE A-2 SAE A-2CL SAE B-2 SAE B-4 SAE C-2 SAE C-4 SAE -2 SAE /4 IENSIONS SOWN ARE OR REERENCE ONLY. CERTIIE RINTS ARE AVAILABLE UON REQUEST. 1-1/2 9-3/8 5/8 IA. BOLT INUT BUSIN SIZES IA. - 1/4 X 1/8 KW 13T - 16/32.. SLINE 15T - 16/32.. SLINE 9T - 16/32.. SLINE 14T - 12/24.. SLINE 21T - 16/32.. SLINE COUNTERBORE (QTY) J B.C. IA. OLES K SAT OUNTE UNITS REQUIRE TORQUE ARS. TORQUE AR KITS ARE AVAILABLE SEE AE -51. AITIONAL RATIOS, OUTUT BORES AN INUT BORES ARE AVAILABLE CONSULT ACTORY. OR LUBRICATION AN INSTALLATION INSTRUCTIONS - REER TO SECTION R RY SIIN WEIT 480 LBS. A-2 7/ / /8 (2) 3/8 NC 4-3/16 8-3/8 8-3/8 A-2CL 7/ / /8 (2) 1/2 NC 4-3/16 8-3/8 8-3/8 B-2 7/ / /8 (2) 1/2 NC 5-3/4 8-3/8 8-3/8 B-4 7/ / /8 (4) 1/2 NC 5 8-3/8 8-3/8 C-2 7/ / /16 5/8 (2) 5/8 NC 7-1/8 8-3/8 8-3/8 C-4 7/ / /16 5/8 (4) 1/2 NC 6-3/8 8-3/8 8-3/ / / /16 5/8 (4) 25/32 IA /8 8-3/8-43 ouble Reduction

44 UB CITY ARALLEL SAT RIVES odel 75 - ouble Reduction eatures Rugged uctile iron housing designed for rigid gear and bearing support. Alloy shafting and sleeves for greater strength. recision bearings on all shafts. Choice of nine (9) standard gear ratios. eat treated alloy steel gearing for strength and long wear life. eavy-duty industrial seals to keep lubricant in and dirt out. Shaft mount design for direct mounting on the drive shaft of equipment to be driven. UB CITY lubricant recommended. (Refer to Section R) OUBLE REUCTION UNITS ROVIE SAE IRECTION OUTUT ROTATION Rating Table RATIOS Input R 5.06:1 9.9: :1 20: : : :1 49.3: : INUT ORSEOWER OUTUT R OUTUT TORQUE IN. LBS INUT ORSEOWER OUTUT R OUTUT TORQUE IN. LBS INUT ORSEOWER OUTUT R OUTUT TORQUE IN. LBS INUT ORSEOWER OUTUT R OUTUT TORQUE IN. LBS INUT ORSEOWER OUTUT R OUTUT TORQUE IN. LBS

45 UB CITY ARALLEL SAT RIVES 10-11/16 odel 75 - ouble Reduction 3/4 9-15/16 1-1/4 TY /8 5/8 X 5/16 &W KEYWAY 4-5/32 TY. 6-1/8 41/64 IA. OLE 1-1/2 R C.. 4 TY / / C X 1/4 KEYWAY /2 1/2 NT (8) 13-1/4 3/4 IA. BOLTS 4-3/32 TY. 9-3/8 E SEE CART OR (QTY) J OLES ON K B.C. OR EAC LANE SIZE IENSIONS SOWN ARE OR REERENCE ONLY. CERTIIE RINTS ARE AVAILABLE UON REQUEST. 18-3/4 SAT OUNTE UNITS REQUIRE TORQUE ARS. TORQUE AR KITS ARE AVAILABLE SEE AE -51. AITIONAL RATIOS, OUTUT BORES AN INUT BORES ARE AVAILABLE CONSULT ACTORY. 1-3/8 LANE E SAE C-2 SAE C-4 SAE B-4 SAE A-2 SAE A-2CL SAE B-2 INUT BUSIN SIZES IA. - 1/4 X 1/8 KW IA. - 5/16 X 1/8 KW 13T - 16/32.. SLINE 21T - 16/32.. SLINE IA. - 1/4 X 1/8 KW 1-6B SLINE 14T - 12/24.. SLINE IA. - 1/4 X 1/8 KW 9T - 16/32.. SLINE 15T - 16/32.. SLINE COUNTERBORE (QTY) J B.C. IA. OLES K OR LUBRICATION AN INSTALLATION INSTRUCTIONS - REER TO SECTION R RY SIIN WEIT 550 LBS. A / /8 (2) 3/8 NC 4-3/ A-2CL / /8 (2) 1/2 NC 4-3/ B / /8 (2) 1/2 NC 5-3/4 8 8 B / /8 (4) 1/2 NC C / /16 5/8 (2) 5/8 NC 7-1/8 10-5/8 8-1/2 C / /16 5/8 (4) 1/2 NC 6-3/8 10-5/8 8-1/2-45 ouble Reduction

46 UB CITY ARALLEL SAT RIVES odel 8 - ouble Reduction eatures Rugged uctile iron housing designed for rigid gear and bearing support. Alloy shafting and sleeves for greater strength. recision bearings on all shafts. Choice of five (5) standard gear ratios. eat treated alloy steel gearing for strength and long wear life. eavy-duty industrial seals to keep lubricant in and dirt out. Shaft mount design for direct mounting on the drive shaft of equipment to be driven. UB CITY lubricant recommended. (Refer to Section R) OUBLE REUCTION UNITS ROVIE SAE IRECTION OUTUT ROTATION Rating Table RATIOS Input R 5.16: : : : : INUT ORSEOWER OUTUT R OUTUT TORQUE IN. LBS INUT ORSEOWER OUTUT R OUTUT TORQUE IN. LBS INUT ORSEOWER OUTUT R OUTUT TORQUE IN. LBS INUT ORSEOWER OUTUT R OUTUT TORQUE IN. LBS INUT ORSEOWER OUTUT R OUTUT TORQUE IN. LBS

47 UB CITY ARALLEL SAT RIVES 11-3/4 odel 8 - ouble Reduction 3/ /16 TY. 5 5/8 X 5/16 KEYWAY 4 E. LT. 1-1/2 6-1/8 41/64 IA. OLE 1-1/ C.. 1/2 NT (7) 4-23/ /32 1-1/8 TY / C X 1/4 KEYWAY 1-9/ /16 TY. 9-3/4 1-3/8 E LANE SEE CART OR (QTY) J OLES ON K B.C. OR EAC LANE SIZE E 13-5/8 SAE C-2 SAE C-4 3/4 IA. BOLTS SAE B-4 SAE A-2 SAE A-2CL SAE B-2 1-1/2 IENSIONS SOWN ARE OR REERENCE ONLY. CERTIIE RINTS ARE AVAILABLE UON REQUEST. INUT BUSIN SIZES IA. - 1/4 X 1/8 KW IA. - 5/16 X 1/8 KW 13T - 16/32.. SLINE 21T - 16/32.. SLINE IA. - 1/4 X 1/8 KW 1-6B SLINE 14T - 12/24.. SLINE IA. - 1/4 X 1/8 KW 9T - 16/32.. SLINE 15T - 16/32.. SLINE 18-3/4 COUNTERBORE (QTY) J B.C. IA. OLES K A / /16 (2) 3/8 NC 4-3/ A-2CL / /16 (2) 1/2 NC 4-3/ B / /16 (2) 1/2 NC 5-3/4 8 8 B / /16 (4) 1/2 NC C / /16 15/16 (2) 5/8 NC 7-1/8 10-5/8 8-1/2 C / /16 15/16 (4) 1/2 NC 6-3/8 10-5/8 8-1/2 9-3/8 SAT OUNTE UNITS REQUIRE TORQUE ARS. TORQUE AR KITS ARE AVAILABLE SEE AE -51. AITIONAL RATIOS, OUTUT BORES AN INUT BORES ARE AVAILABLE CONSULT ACTORY. OR LUBRICATION AN INSTALLATION INSTRUCTIONS - REER TO SECTION R RY SIIN WEIT 725 LBS. ouble Reduction -47

48 UB CITY ARALLEL SAT RIVES odel T-100 Shifting Transmission eatures Input and output shafts in-line. Shifting mechanism allows selection of neutral and two (2) ratios. Rugged cast iron housing designed for rigid gear and bearing support. Alloy shafting for greater strength. eavy-duty ball bearings on input and output shafts. Needle bearings on pilot and counter shaft. eat treated alloy steel gearing for strength and long wear life. Choice of 1:1 and two (2) standard gear ratios. eavy-duty industrial seals to keep lubricant in and dirt out. Available with hydraulic flange or shaft input. UB CITY lubricant recommended. (Refer to Section R) T-100 manufactured to order only. Consult factory for price and delivery. Rating Table RATIOS INUT 1:1 AN 2.20:1 1:1 AN 2.86:1 INUT ORSEOWER OUTUT R OUTUT TORQUE IN. LBS INUT ORSEOWER OUTUT R OUTUT TORQUE IN. LBS INUT ORSEOWER OUTUT R OUTUT TORQUE IN. LBS INUT ORSEOWER OUTUT R OUTUT TORQUE IN. LBS INUT ORSEOWER OUTUT R OUTUT TORQUE IN. LBS Overhung Load - Input 450 LBS. Output 550 LBS. -48