Series SS Solid Stainless Cylinders
|
|
- Ursula Cunningham
- 5 years ago
- Views:
Transcription
1 Series SS Solid Stainless Cylinders Pneumatic to 200 PSI Hydraulic to 000 PSI Non shock 3/4, /8,, 2 Bore To Help Brighten Your Corner of the World. All exterior components 300 series stainless A U R O R A A I R P R O D U C T S 50
2 SS STAINLESS DESIGN FEATURES Piston rod is hard chrome plated type 303 stainless. Optional hollow piston rods available (hollow rod is not chrome plated) End caps are machined from type 303 stainless steel. Heavy duty urethane rod wipers seal out the environment. Other materials available. Removable stainless retaining rings hold the seal and rod wiper in place. Pneumatic Rod Seal is a longlife nitrile cup. Hydraulic Rod Seal is pressure energized and extra long wearing for improved stability Tube is heavy /8 inch wall type 304 stainless steel and is precision honed to insure proper size, roundness, and finish for maximum cylinder life. Reduce noise and fatigue problems such as rod breakage with urethane shock pads. Pneumatic use only to 80 F. Extra long rod bearings of sintered bronze provide ample support and serve as an oil reservoir for pneumatic use. The bearing is inboard of the seal, away from the environment to ensure proper lubrication. Optional non metalic rod bearings available for chemically inert or severe applications Brass piston silver brazed to the piston rod provides an almost indestructable joint. Optional solid stainless steel piston with teflon wearstrip available for chemically inert or clean applications. Piston seals are extra long wearing pressure energized lip seals of the highest quality O ring static tube seal Optional wick provides teflon lube for non-lube service Adjustable cushions to provide deceleration at the end of the stroke are available on most models above 3/4 bore Magnetic piston available to operate Aurora stainless proximity switches TM 5
3 BORE SERIES SS STAINLESS 200 PSI MAX. AIR 000 PSI MAX. HYD. Non shock 4 /4 + STROKE 2 /4 Single Acting Cylinders Pneumatic only Adds to cylinder length /4 Add to Add to TYPE STROKE cyl. O.A.L. STROKE cyl. O.A.L. SS 3/4 DIA. /8-27 NPT /8-27 NPT / PILOT DIA..246 x /64 Spring extend Spring return /8-4 Spring Force: Spring fully extended approx. 5# Spring fully compressed approx. 50# /4-2SS Nut Nose Mounting Nut Not included with cylinder Order Separately 2 / /6 5 5/6 + STROKE /6 2 /4 /4 7/8 23/32 SS2 3/4 DIA..50 DIA..503 /8-27 NPT 4 + STROKE / PILOT DIA..246 x /64 2 /4 /4 8-8 Stainless SS-500 Rod Clevis and Nut /6 SS3 / PILOT DIA..246 x /64 3/4 DIA. /8-27 NPT 4 + STROKE 3/4 DIA. 2 /4 / PILOT.246 x /64 DIA. /4-20 THREAD 303 Stainless 7/8 SQUARE SS-50 Clevis Pin Assembly Used on SS Stainless SS5 /8-27 NPT / PILOT DIA..246 x /64 We ll Bill You for the Cylinders... 2 /4 + STROKE 4 7/8 + STROKE 2 /4 /4 but Our Experience is Free SS6 / PILOT DIA..246 x /64 3/4 DIA. /8-27 NPT / PILOT DIA..246 x /
4 SOLID STAINLESS CYLINDERS IN 24 HOURS TM SS Options Shock Pads Wrench Flats Viton Seals Non-lube Service Non-Metallic Rod Br g Reverse Polypak Wiper Stainless Piston Magnetic Piston Hollow Piston Rod 90 Rear Clevis Adjustable Cushions 5 /8 + STROKE 7/8 3/4 DIA..249 PILOT DIA. /8-27 NPT.246 x /8 /8-27 NPT /32 DIA. THRU, 5 + STROKE 7/8 SS0 Wrench Flats Optional SS-00 St d Clevis Brk t Used on SS 2 Series 300 Stainless /6 SSC-90 Low Profile Clevis Brk t Used on SS 2 Series 300 Stainless DIA. 3/32 /4 /4 DIA. /4 TYP. /32 R. /32 DIA. 2 PLC. 3/6 3/32 /4 2 / /4 SQUARE 7/64 DIA.THRU, 4 PLC. 45 7/6 See SMS Stainless for More Compact Size and Lower Cost.500 DIA. THRU /32 /8-27 NPT 3/4 DIA. /32 DIA. THRU, 5 3/4 + STROKE 3/4 DIA. /8-27 NPT 4 + STROKE /32 DIA. THRU, 4 7/8 + STROKE 7/ PILOT DIA. x /8.249 PILOT DIA..246 x /8 /32 DIA. THRU, 3/4 DIA. /4-2 /8-27 NPT.249 PILOT DIA..246 x /64 /32 DIA. THRU, + STROKE 7/8 6 + STROKE 3/4 DIA. 7/8 2 /4 /4.249 PILOT DIA..249 PILOT DIA..246 x /8 /8-27 NPT.246 x /8 /32 DIA. THRU, 4 + STROKE /32 DIA. THRU, SS SS2 SS3 SS4 57 Series SS Solid Stainless
5 ORDERING PROCEDURE - Series SS Stainless Select code numbers/letters (bold type) from each of the six boxes below - then select options desired from the table below. List codes in the same sequence as shown. Bore 3/4" /8" " 2" Type Single Acting Spring return Single Acting Spring extend Double acting Adds to cyl. length If double rod end model is to be single acting, select A A B C Service Pneumatic Hydraulic E G Mounting Style/ SS SS 0 SS 2 SS SS 3 SS 2 SS 5 SS 3 SS 6 SS 4 Stroke is stroke in total /8" increments Example: " stroke = 8 2 /4" stroke = 8 Stocked in " increments as follows: 3/4" bore to 6" /8" bore to 8" " bore to 0" 2" bore to 2" Bore All Piston Rod s Thread Plain rod No thread 5/6-8 x 3/4 5/6-24 x 3/4-6 x 3/4-24 x 3/4-3 x -20 x -x /4-8 x /4 SS 6, 4 Double rod models will have same rod thread both ends Option Description Extra rod extension Specify code letter J followed by the extra length as a two place decimal. J Example: J.50 = " extra J.25 = /4"extra SS6, 4 double rod cylinders with extra extension cannot be ordered by a standard part number - consult factory for om a special the table part number. Wrench flats Specify if required K If specified will be added to both ends of SS6, 4 double rod cylinders Shock pads Double acting cylinders only must be added to both ends Adds " to length pneumatic use only to 80 F N Non-lube service Pneumatic only Not available with magnetic piston or solid stainless piston P Viton seals Standard seals are nitrile and urethane +0 to +80 F For service 0 to +400 F specify viton R Reverse polypak More effective at keeping liquids and gases out of the cylinder rod wiper S Clevis 90 to st'd SS 2 only T Stainless piston Magnetic piston Adds " to length on 3/4" bore only Not available with Non-lube or stainless piston options Hollow piston rod Available in 5/6 dia.rod thru hole.35" Available in dia.rod thru hole.248" Rod is plain 304 stainless - no chrome plating Available in dia.rod thru hole.33" Non - metalic Fiberglass backed teflon rod bushings Adjustable Cushions Part No. Example:.500" bore 303 Stainless with teflon wear strip Not available with magnet, non lube, or cushion options Not Available on: 3/4" bore cylinders Rear port caps (SS, 0) Solid stainless piston Cylinders with shock pads Mounting style SS0 Double acting 2" stroke -20 x th'd rod 5 SS0 C 6 G 8 K W Hydraulic Cushion head end only Cushion cap end only Cushion both ends Magnetic piston Wrench flats V W X Y AA BB CC
6 TM Series SS Service Parts When ordering any repair part please provide the part number and description shown below along with the serial number and part number of the cylinder being serviced Key Description 3/4 Bore /8 Bore Bore 2 Bore Seal kit Pneumatic, Nitrile Add suffix NL for Non-lube Add suffix REV for Reverse Polypak Wiper SS 2207 PB SS 22 PB SS 225 PB SS 2220 PB Seal kit Pneumatic, Viton Add suffix NL for Non-lube Add suffix REV for Reverse Polypak Wiper SS 2207 PV SS 22 PV SS 225 PV SS 2220 PV Seal kit Hydraulic, Urethane Add suffix REV for Reverse Polypak Wiper SS 2207 HU SS 22 HU SS 225 HU SS 2220 HU Seal kit Hydraulic, Viton Add suffix REV for Reverse Polypak Wiper SS 2207 HV SS 22 HV SS 225 HV SS 2220 HV 2 2 Rear port cap Rear pivot cap 90ϒ Rear pivot cap SS 007 SS 07 SS 0790 SS 0 SS SS 90 SS 05 SS 5 SS 590 SS 020 SS 20 SS Rear stud cap SS 207 SS 2 SS 25 SS Side port cap SS 307 SS 3 SS 35 SS Square cap SS 507 SS 5 SS 55 SS Tube Piston rod assembly part No. is T followed by the complete cylinder part number part No. is PR followed by the complete cylinder part number 8 Spring guide Pair SS 2007 SS 20 SS 205 SS Spring SS 207 SS 2 SS 25 SS Magnet or 2 as necessary SS 3207 SS 32 SS 325 SS 3220 Shock pad 75MSP MSP 5MSP 2MSP 2 Rod bearing Add suffix DU for non-metalic SS 02 SS 025 SS Head w/ Bronze br'g SS 007 SS 0 SS 05 SS Head w/ Non-metalic br'g SS 007 DU SS 0 DU SS 05 DU SS 020 DU 4 Head w/ Bronze br'g SS 407 SS 4 SS 45 SS Head w/ Non-metalic br'g SS 407 DU SS 4 DU SS 45 DU SS 420 DU 5 Rod seal retaining washer SS 0507 SS 05 SS 055 SS Rod seal/rod wiper snap ring SS 0607 SS 06 SS 065 SS Rod wiper inside retaining washer Add suffix REV for Reverse Polypak Wiper SS 0307 SS 03 SS 035 SS Rod wiper outside retaining washer Add suffix REV for Reverse Polypak Wiper SS 0407 SS 04 SS 045 SS Cushion screw 3/4" long SS 26 SS Cushion screw 7/8" long SS 26L SS 265L SS 2620L 20 Cushion screw locknut SS 27 SS 275 SS
SMS Solid Stainless Cylinders
SMS Solid Stainless Cylinders Space Saving and Conventional Lengths Pneumatic to 200 PSI Hydraulic 400 to 500 PSI Non shock /8, /2, 2, 3 Bore 300 Series Stainless Exterior Assures Aesthetics and Function
More informationSMS Solid Stainless Cylinders
SMS Solid Stainless Cylinders Space Saving and Conventional Lengths Pneumatic to 200 PSI Hydraulic 400 to 500 PSI Non shock /8,, 2, 3 Bore 300 Series Stainless Exterior Assures Aesthetics and Function
More informationSeries HB Solid Brass Cylinders
Series HB Solid Brass Cylinders For General Industrial Use in most nvironments 00 PSI Pneumatic 500 PSI Hydraulic Non shock,, /8,, Bores Magnetic piston available to operate Aurora stainless proximity
More informationSeries HB Solid Brass Cylinders
Series HB Solid Brass Cylinders or General Industrial Use in most nvironments 00 PSI Pneumatic 500 PSI Hydraulic Non shock,, /8, /, Bores Magnetic piston available to operate Aurora stainless proximity
More informationSeries HB Solid Brass Cylinders
Series HB Solid Brass Cylinders or General Industrial Use in most nvironments 00 PSI Pneumatic 500 PSI Hydraulic Non shock,, /8, /, Bores Magnetic piston available to operate Aurora stainless proximity
More informationSMA Aluminum Cylinders
SMA Aluminum Cylinders PNEUMATIC TO 200 PSI HYDRAULIC 250 TO 400 PSI Non shock 1 1/8, 1, 2, 3 BORE SPACE SAVING AND CONVENTIONAL DESIGNS REPAIRABLE Very high quality Pancake type cylinders with all of
More informationSMA Aluminum Cylinders
SMA Aluminum Cylinders PNEUMATIC TO 200 PSI HYDRAULIC 250 TO 400 PSI Non shock /8,, 2, 3 BORE SPACE SAVING AND CONVENTIONAL DESIGNS REPAIRABLE Very high quality Pancake type cylinders with all of the engineering
More informationSMA Aluminum Cylinders
SMA Aluminum Cylinders PNEUMATIC TO 200 PSI HYDRAULIC 250 TO 400 PSI Non shock /8,, 2, 3 BORE SPACE SAVING AND CONVENTIONAL DESIGNS REPAIRABLE Very high quality Pancake type cylinders with all of the engineering
More informationQUICK INDEX. Series SMA Aluminum. Pancake and conventional lengths 1 1/8 thru 3 bore. Series SMS Solid Stainless
QUICK INDEX A U R O R A A I R P R O D U C T S Series SMA Aluminum Pancake and conventional lengths /8 thru 3 bore Series SMS Solid Stainless Pancake and conventional lengths for hostile environments Series
More informationHYDRAULIC HEAVY DUTY
Catalog #HHD-16 12/16 HYDRAULIC HEAVY DUTY Series HHD 3000 PSI RATED 10-25-16 WARNING IMPROPER SELECTION, IMPROPER USE OR FAILURE OF THE PRODUCTS AND/OR SYSTEMS DESCRIBED HEREIN CAN CAUSE PROPERTY DAMAGE,
More informationClippard offers more types of miniature pneumatic cylinders for the MINIMATIC CYLINDER
MINIMATIC CYLINDER Clippard offers more types of miniature pneumatic cylinders for the designer s convenience, including: spring return, spring extend, air retract, double-acting and double rod models.
More informationThe Lehigh Miracalube Air Cylinder The Only Real Self-Lube Air Cylinder in the World BENEFITS!
SERIES JHD HEAVY DUTY AIR CYLINDER The Lehigh Miracalube Air Cylinder The Only Real Self-Lube Air Cylinder in the World BENEFITS! The true test of a cylinder is how well it performs in your application.
More informationSERIES PA PNEUMATIC CYLINDERS FOR VALVE ACTUATION BORE SIZE: 3 1/4 TO 20 RATING: 150 PSIG (1000 KPA)
BORE SIZE: 3 /4 TO 0 RATING: 50 PSIG (000 KPA) PNEUMATIC CYLINDERS FOR VALVE ACTUATION FEATURES THE PA SERIES OF VALVE ACTUATORS ARE DESIGNED TO AUTOMATE VALVE OPERATION. THESE ACTUATORS CAN BE ADAPTED
More informationASP Series Steel Body NFPA Cylinder Line
Series Steel Body NFPA Cylinder Line www.numatics.com Table of Contents Series Features and Benefits 3 Standard Mounts 4 How to Order 5 Port Size Availability 6 Dimensions 7-34 Rod Ends 7 Large Bore 8
More informationProvenair Series AN Cylinders Parts List / Service Instructions
Provenair Series AN Cylinders Parts List / Service Instructions 1-1/2, 2, 2-1/2, 3-1/4 and 4 BORES EXTRUDED BARREL CONSTRUCTION 5, 6, 8 and 10 BORES TIE ROD CONSTRUCTION TYPE: Aluminum, repairable, square
More informationFP 106 x PTM - PS
Single and Double acting 9/6" to " bore Technical Data: Medium: Filtered, lubricated or nonlubricated, compressed air Operating Pressure 00 psig (.6 Bar) Max. Temperature Range: Standard Nitrile seals:
More informationTable of Contents General Specifications, Available Mountings... 1 Introduction... 2 Application Examples... 3 Features... 4 Theory of Operation... 5
With Continuous Position Feedback Catalog AU08-0971/NA September, 2002! Compact Design! Highly Accurate Position Feedback Capability! Electronic Controllers Available! 5 Bore Sizes Table of Contents General
More informationSUPERIOR CONSTRUCTION FEATURES SERIES B AIR CYLINDERS, 1 2" THRU 2" BORE SIZE MAXIMUM PSI 250
SUPERIOR CONSTRUCTION FEATURES SERIES B AIR CYLINDERS, 1 2" THRU 2" BORE SIZE MAXIMUM PSI 250 ALUMINUM HEADS & CAPS LARGE PORTS PISTON PACKING PISTON WIPER BRONZE BEARING PACKING TUBE SEAL CYLINDER TUBE
More information* Screw clearance to allow bolt head to pass through - no counter bores
Technical Data: Medium: Filtered, lubricated or nonlubricated, compressed air Operating Pressure 00 psig (.6 Bar) Max. Temperature Range: Standard Nitrile seals: -0 F to 00 F (-0 to 65 ) 50 F max. with
More informationPosition Control Hard chrome-plated carbon steel piston rod with blackened threads and wrench flats Sintered bronze rod bushing Internally lubricated
Position Control System Products Cylinders 7.3-7.9 Cylinder Rod Lock 7.10-7.11 Cylinder Accessories 7.12-7.15 Pneu-Turn 7.16-7.24 Position Control System 7.25-7.36 Digital Panel Meter 7.37-7.42 Electronic
More informationACTUATORS. F-Series Plus Cylinders Single and Double acting 9/16" to 3" bore. Technical features Medium: Filtered, lubricated or nonlubricated,
F-Series Plus ylinders Technical features Medium: Filtered, lubricated or nonlubricated, compressed air Operating pressure 200 psig (3.6 Bar) Max. Temperature range: Standard Nitrile seals: -40 F to 200
More informationRPD Series Delrin End Cap Roundline Plus Stainless Steel Body Actuators 9/16" to 2" bore Double acting pneumatic actuators
RP Series elrin nd ap Roundline Plus Stainless Steel Body ctuators 9/6" to 2" bore ouble acting pneumatic actuators elrin cetal Resin end cap cylinders for washdown, and corrosive environment application
More informationHTR TIE-ROD CYLINDERS H I K M N TUBE OD
1 Brand Cylinders LINE THE HTR Pressure Ratings: 2" - 4" Bore = 2500 PSI, 5" Bore = 2000 PSI BORE (INCH) B C D E F G = J 2.0 1.015 2.125 1.625 1.000 1.000 1.142 2.5 1.015 2.125 1.625 1.000 1.000 1.142
More informationSeries AM/MM/WM Mill Type Cylinders
ET AH To order this part, call Lifco Hydraulics USA Toll Free at -00-- S S ZE* SS* SW (TYP) FB THRU, () PLACES TE UF WA / EE P* ØE EE P* CD 00 M CW S Series AM/MM/WM Mill Type Cylinders Table of Contents
More informationacting, spring return, spring extend and double rod models. Hall Effect sensors and magnetic piston versions are also available.
AIR FORCE ONE COMPACT CYLINDER Clippard Instrument Laboratory, Inc. Air Force One compact cylinders are available in double acting, spring return, spring extend and double rod models. Hall Effect sensors
More informationCompact Select Cylinders Inch Series.
Compact Select Cylinders Inch Series Table of Contents: Inch Series Inch Series, Options and ccessories Inch Series How to Order: Inch Series... pg. Forces, Pressure Ratings, Envelope Dimensions... pg.
More informationSRX Series Stainless Steel Body Air Cylinders with Continuous Position Feedback
with Continuous Position Feedback P P1L SRX SR/SRM, SR/SRM Contents Features... 42 Cylinder Ordering Information... 43 Specifications... 44 Engineering Specifications... 45 imensions...46-50 Mechanical
More informationCYLINDER PARTS LIST. R/S Series Cylinders, 1978 through July AB Series Cylinders, 1988 through AF Series Cylinders, 1990 through 1993
The purpose of this book is to provide general guidelines to cylinders and their replacement parts for machinery built between 1978 and the present. Approximate dates are intended to assist in pinpointing
More informationTaskMaster Pneumatic Cylinder
TaskMaster Pneumatic Cylinder Index TaskMaster Cylinders Index Air to 200 psi, 1-1/2" thru 6" Bore Page 1-1/2" thru 4" Bore Features & Specifications 2 (profile version) How to Order 3-5 Mounting Styles
More informationBimba Extruded Linear Thrusters 2X FF X EE DP 2X DD 2X Ø DD X EE DP U V W X Y Z R S Dimensions - ET T B 4X TAP AA THRU Ø BB C BORE X CC DP (OPP.SIDE)
Bimba Extruded Linear Thrusters Engineering Specifications Maximum Operating Pressure 140 psi (10 bar) Temperature Range 15 to 160 degrees F (-10 to 70 degrees C) Expected Service Life 1,500 miles (with
More informationLinear Thrusters/PneuMoment
/PneuMoment Extruded 3.3-3.10 TE Series 3.11-3.16 T Series 3.17-3.22 3.23-3.24 3.25-3.28 3.29-3.32 PneuMoment Pneumatic Actuators PneuMoment Application 3.33 3.34-3.48 3.49 Bimba 304 stainless steel body
More informationLinear Thrusters/PneuMoment
/PneuMoment Extruded 3.3-3.10 TE Series 3.11-3.16 T Series 3.17-3.22 3.23-3.24 3.25-3.28 3.29-3.32 PneuMoment Pneumatic Actuators PneuMoment Application 3.33 3.34-3.48 3.49 Pneu-Moment Bimba Pneu-Moment
More informationOptions selector for T, VT, and ET V T S R 3 / 8 R C E N 1-1/8 5. 5/16" or 3/8"
Series T, T & VT Tiny Tim TUTORS /" and -/8" bore Single and double rod end styles Viton seals optional for higher temperatures Technical data Medium: ompressed air, filtered, lubricated or non-lubricated
More informationFlat Cylinders Flat-1 Square Flat-1 2.3-2.12 2.13-2.19 Flat Cylinders Flat-II Square Flat-II F02, F03, F04 (multiple power) FOP (multiple position) Flat Accessories Stainless Steel Flat-1 EF1 Cylinders
More informationMEDIUM DUTY HYDRAULIC NFPA STYLE 1 1/2 TO 8 BORE AIR 250 PSI HYDRAULIC 1500 PSI
AIR CYLINDERS & MEDIUM DUTY HYDRAULIC NFPA STYLE 1 1/2 TO 8 BORE AIR 250 PSI HYDRAULIC 1500 PSI CONSTRUCTION FEATURES 1. Rod Wiper Urethane 90A 65 to +220F, large cross section lip type wiper designed
More informationOriginal Line Original Line How to Order Introduction to Bimba Standard Air Three-Position Air with Adjustable Cushions MRS Non-Rotating Air PC Steel Non-Repairable Original Line Steel Repairable (Bell
More informationCATALOG FL-16-B THE LIGHT-WEIGHT LINE WITH HEAVY-DUTY FEATURES
HEAVY-DUTY CATALOG FL-6-B THE LIGHT-WEIGHT LINE WITH HEAVY-DUTY FEATURES TABLE OF CONTENTS CYLINDER FEATURES DOUBLE-ACTING Series T, TS, TL and TLS 4 DOUBLE-ACTING DOUBLE-ENDED Series TDE and TSDE 4 MAGNETIC
More informationNEN Series NFPA Aluminum Cylinders
NEN Series NP luminum ylinders 1-1/2" to 4" bore sizes ompetitively priced Magnetic piston standard djustable cushion standard Sleeve nut construction standard Stocked strokes Technical data Medium: iltered
More informationSERIES MH (NFPA) CYLINDER
MH SERIES TAB 58 Floating Rod Bushing SELF ALIGNMENT FEATURE Rod Bushing is designed to float.002 to improve bearing surface alignment. SERIES MH (NFPA) CYLINDER Reduces cylinder drag and erratic operation
More informationSERIES PSI OPERATING PRESSURE HEAVY HYDRAULIC DUTY CYLINDER HEAVY DUTY HYDRAULIC CYLINDER PURAKAL CYLINDERS, INC CYLINDERS, INC
CYLINDERS, INC SERIES 2500 3000 PSI ORATING PRESSURE HEAVY DUTY HEAVY HYDRAULIC DUTY CYLINDER HYDRAULIC CYLINDER PURAKAL CYLINDERS, INC PURAKAL P.O. Box 22038 CYLINDERS, INC P.O. Eugene, Box OR 22038 97402-0414
More informationLinear Thrusters/PneuMoment
/PneuMoment Extruded TE Series 3.3-3.10 3.11-3.16 T Series Multiple Position T4 Series Movable Housing 3.17-3.22 3.23-3.24 3.25-3.28 3.29-3.32 Pneu-Moment Checklist PneuMoment Pneumatic Actuators PneuMoment
More informationOriginal & T Series 8 Bores, 1/2" 4" Features & Benefits General, Standard Specifications
Original & T Series 8 Bores, /2" 4" Section Index Features & Benefits....2 General, Standard Specifications....2 Page Construction Details....3,.4 How a Pancake is built Information....5,.6 How a Pancake
More informationP1E Series ISO Cylinders
High fibre nitrile Combined cushion/ Aluminium tube to Zinc diecast end plates Retained cushion piston rod seal non return seal for give high strength on 32, & 50mm bore adjusting screw allows a and polyurethane
More informationLinear Thrusters/PneuMoment
/PneuMoment Extruded TE Series (Composite Bearings) 3.3-3.10 3.11-3.16 T Series Multiple Position T4 Series Movable Housing 3.17-3.22 3.23-3.24 3.25-3.28 3.29-3.32 Pneu-Moment Checklist PneuMoment Pneumatic
More informationAS/ASH SERIES ALUMINUM PNEUMATIC AND HYDRAULIC CYLINDERS... 6
AS/ASH SERIES ALUMINUM PNEUMATIC AND HYDRAULIC CYLINDERS............. 6 Section 6 8 ORDERING INFORMATION For Rod End Dimensions see back cover foldout... Basic Cylinder No Mount.0" to 4.00" For pressure
More informationRound Body Minicylinders, DIN/ISO 6432 Series 16, 24 and 25
Round Body Minicylinders, DIN/ISO 6432 Series 16, 24 and 25 Series 16: ø 8-10 - 12 bumpers Series 24: ø 16-20 - 25 bumpers and magnetic piston Series 25: ø 16-20 - 25 adjustable cushion and magnetic piston»»
More informationAZ Cylinder. Specifications. Features: Features Type ISO 6431 VDMA CETOP RP43P. Ø32mm - 100mm ISO 6431 VDMA CETOP RP43P.
Specifications Features Type ISO 6431 VDM 24562 CTOP P43P Series Z Configurations Z Double cting, Single od, Magnetic Piston, Cushions ZD Double cting, Double od, Magnetic Piston Construction Materials
More informationMobile Cylinder Div. Standard Build Series. Catalog HY /US Rev C
Mobile Cylinder Div. Standard Build Series Catalog HY18-0014/US Rev C WARNING - USER RESPONSIBILITY FAILURE OR IMPROPER SELECTION OR IMPROPER USE OF THE PRODUCTS DESCRIBED HEREIN OR RELATED ITEMS CAN CAUSE
More informationLP/LPM Series. Non-Lube Air Cylinder P1M. Tooling Plate P1M. Swing Clamp P1M. Contents E51
Non-Lube Air Cylinder P1G C05(S) LP(M) Swing Clamp Tooling Plate Contents Features...52 Ordering Information...53 Specifications...54 Basic Dimensions...55 Mounting Options...56 Spring Data...57 Rod Options...58
More informationSTAINLESS STEEL CYLINDER CONSTRUCTION
STAINLESS STEEL CYLINDER CONSTRUCTION In the early 950 s, Clippard introduced miniature pneumatic cylinders and valves to industry. No other manufacturer can boast of the same experience or knowledge of
More informationLinear Thrusters/PneuMoment
/PneuMoment Extruded 3.3-3.10 TE Series (Composite Bearings) 3.11-3.16 T Series (Ball Bearings) 3.17-3.22 Multiple Position 3.23-3.24 NEW T4 Series 3.25-3.28 Checklist 3.29 PneuMomentPneumatic Actuators
More informationFour Shaft Linear Thrusters
Four Shaft Linear Thrusters FOUR SHAFT THRUSTERS Three Models with bores from 2 to 4 Twice the load capacity of comparable two shaft units Reduced deflection and bearing play Compact, light weight robust
More informationTABLE OF CONTENTS CYLINDER FEATURES MOUNTING STYLES DOUBLE-ACTING Series T and TS 4 DOUBLE-ACTING DOUBLE-ENDED Series TDE and TSDE 4 MAGNETIC SWITCH D
HEAVY-DUTY CATALOG FL-6-A FLAIRLINE FAST Shipped in - days THE LIGHT-WEIGHT LINE WITH HEAVY-DUTY FEATURES TABLE OF CONTENTS CYLINDER FEATURES MOUNTING STYLES DOUBLE-ACTING Series T and TS 4 DOUBLE-ACTING
More informationTable of Contents ISO
Table of Contents ISO 6432...3-12 Features and Benefits...3 How to Order....4 Dimensions Single Rod End, Single and Double Acting...5 Single and Double Acting-Double Rod...6 Mounting Accessories...7-10
More informationBimba Original Line - Stainless Steel Body Air Cylinders
Bimba Original Line - Stainless Steel Body Air Cylinders How to Order The model number of all Original Line cylinders consists of three alphanumeric clusters. These designate product type, bore size and
More informationDuty Types and Forces
Types and Forces Threaded Body Metric Cylinders cting Compact Cylinders, End s: mm, mm, and mm Threaded Body Metric Cylinders TB series cylinders are single acting. Their single port is located at the
More informationGROUND BLOCK RETRACT CYLINDERS
ISO 9001 REGISTERED GROUND BLOCK RETRACT CYLINDERS FOR ALL MIG & ARC WELDING APPLICATIONS IN FIXTURES, TRUNIONS, AND DIAL TABLES. INSULATED GROUND BLOCK CYLINDERS ARE IDEAL FOR SINGLE-POINT WELDING. SOLID
More informationGROUP 3 HYDRAULICS 636 EXTENDO PARTS BOOK
GROUP 3 HYDRAULICS 636 EXTENDO ELECTRICAL SCHEMATIC FOR 636 & 5528, AL-11969... 3-4 ELECTRICAL PLUG-INS SCHEMATIC, BL-10012... 3-7 HYDRAULIC SCHEMATIC, AL-11355... 3-8 HYDRAULIC SCHEMATIC WITH OPTIONAL
More informationHigh Performance Repairable Pneumatic Cylinder Parker Hannifin Corporation
High Performance Repairable Pneumatic Cylinder 219 Pneumatic ivision eatures Optional Piston Magnet Located under wear band, piston magnet is used for through-thebarrel sensors for electronic piston position
More informationFULL COLOR TAB #16 TECHNICAL DATA
FULL COLOR TAB #16 TECHNICAL DATA 276 General How Force Charts Weight Charts Seal Kits Conversion Charts TECHNICAL DATA How to determine the right cylinder size for the job. To determine what cylinder
More informationHEAVY DUTY PNEUMATIC CYLINDERS
HEAVY DUTY PNEUMATIC CYLINDES Features: Conforms to ISO:30 standard. Double Acting, with adj. cushioning at both ends. Sizes: Ø, Ø, Ø, Ø, Ø, Ø0, Ø1, Ø0, Ø0 & Ø0. : Other bore sizes on request Seamless
More informationKRONES DIRECT REPLACEMENTS
PLASTIC PACKAGING COMPONENTS GRO Quality Support Delivery SOLUTIONS A BLOW division MOLDING SOLUTIONS of PHD PLASTIC PACKAGING COMPONENTS P KRONES DIRECT REPLACEMENTS phdinc.com (800) 624-8511 INCREASE
More informationAF0465-XX SERVICE KITS GENERAL DESCRIPTION MODEL DESCRIPTION CHART OPERATING AND SAFETY PRECAUTIONS THIS MANUAL COVERS THE FOLLOWING MODELS
OPERATOR S MANUAL INCLUDING: SERVICE KITS, TROUBLESHOOTING, PARTS LIST, DISASSEMBLY & REASSEMBLY. 4-1/4 AIR MOTORS AF044X-XX (4 STROKE) and AF046X-XX (6 STROKE) Also covers 637489 service kits AF044X-XX
More informationFeatures and Benefits
...........................................................3-14 Features and Benefits..............................................................................3 How To Order....................................................................................4
More informationSERVICE MANUAL / PARTS LIST
SERVICE MANUAL / PARTS LIST MARK 55 PUSH PULL CONTENTS: PAGE 1 Lift Truck Requirements General Installation Procedures General Inspection 2-3 Base Assembly 4 Linkage Assembly 5 Platen Assembly 6 Jaw /
More informationSEAL & CYLINDER SOURCE, INC. CYLINDERS & COMPONETS CATALOG
SEAL & CYLINDER SOURCE, INC. & COMPONETS CATALOG 1-877-905-7325 ABOUT US Cylinder Source, Inc. is a family owned and operated business with over 25 years of automotive and industrial experience that strives
More informationThe friction free alternative
Rolling The Rolling Diaphragm Air Cylinder The advent of the long stroke rolling diaphragm as a means of low-friction dynamic sealing has led to the development of the ControlAir Diaphragm Air Cylinder.
More informationPURAKAL SERIES 100 TABLE OF CONTENTS
TABLE OF CONTENTS How to Order Cylinder......................... Repair Kit......................... Seal Kit......................... Warranty......................... Parts List.........................
More informationSlim, Flat, Elliptical Piston DZH Cylinders Provide Non-rotating Linear Actuation in up to 50% Less Space
Non-Rotating Elliptical Piston Cylinders, Type DZH Features and Benefits Slim, Flat, Elliptical Piston DZH Cylinders Provide Non-rotating Linear Actuation in up to 50% Less Space Patented elliptical piston/seal
More informationAngle Seat Valve 7010
Angle Seat Valve 7 DN 8 up to DN 8 PN 16 - PN Pneumatically operated angle seat valve for the control of neutral, slightly aggressive and highly aggressive media. Compact design Unaffected by lightly contaminated
More informationAIR AND HYDRAULIC CYLINDERS NFPA INDUSTRIAL TYPE
AIR AND HYDRAULIC CYLINDERS NFPA INDUSTRIAL TYPE NFPA Industrial Type Cylinders TaskMaster Pneumatic Cylinders (to 200 psi) 1 1/2" - 4" Bores 5" & 6" Bores Profile Design External Tie Rods PowerMaster
More informationDURA-TRANS NB-SERIES. Bi-Directional Transfer NB-10 NB-20 TECHNICAL SPECIFICATION OPERATING PRINCIPLES 6-1.1
NB-SERIES NB Series of Bidirectional Transfer Devices, commonly known as tuckers, provide a practical low-cost method for automatic work positioning. The units are extremely compact and eliminate the need
More informationOriginal Line Cylinders
How to Order Introduction to Bimba 1.3 1.4-1.9 Standard Air 1.10-1.66 Three-Position 1.67-1.68 Air with Adjustable Cushions 1.69-1.76 MRS 1.77-1.87 Non-Rotating Air 1.88-1.98 PC 1.99-1.104 Steel Non-Repairable
More informationRL-G70 PARTS LIST # I USE THIS PARTS LIST FOR: Hoist Serial Number 6597 to
RL-G70 PARTS LIST # 102693I USE THIS PARTS LIST FOR: Hoist Serial Number 6597 to For older hoists use the following: Parts List No. 102692H for Serial Number 2485 to 6596 IF YOUR HOIST DOES NOT FALL WITHIN
More informationCylinders Small Bore Tie Rod
Cylinders Small Bore Tie Rod Reference Control Valves Cylinders Specialty Valves Production Devices Index Cylinder Materials Heads: Tubes: Piston: Rod: Bearing: Piston and Rod Seals: Rod Wiper: Tie Rods:
More informationLF90C thru current printed 7/19/2012 Page 1 of 5
Drill Serial Number Range: LF90C 2011 001 thru current For Drill Build: DRILL MODULE, LF90C (3549226 Rev: D) Document Number: 5400780 Rev. A Effective Date: 1 Jan 2011 KIT SUMMARY 1 102629 KIT, BASE FRAME
More informationCylinders HD1 Cylinders
Cylinders HD Cylinders Cylinders For Abusive Conditions Operating Parameters Reference Control Valves Cylinders Specialty Valves Production Devices Index Combining NFPA dimensional interchangeability and
More informationDrill Serial Number Range: LF90C thru current
Drill Serial Number Range: LF90C- 2011-001 thru current For Drill Build: DRILL MODULE, LF90C (3549226 Rev: D) Document Number: 5400780 Rev. B Effective Date: 1- Jan- 2011 KIT SUMMARY 1 102629 KIT, BASE
More informationExtruded Body Cylinders, ISO 6431, ISO compliant Series 61
1 ISO / VDMA Cylinders NORTH AMERICAN CYLINDER & ACTUATOR CATALOG > Release 8.5 Extruded Body Cylinders, ISO 6431, ISO 15552 compliant Series 61 Single or double-acting, magnetic, cushioned Standard and
More informationTie-rod Cylinders, ISO 6431, ISO compliant Series 60
Tie-rod Cylinders, ISO 6431, ISO 15552 compliant Series 60 Single or double-acting, magnetic, cushioned Standard and low friction versions ø 32, 40, 50, 63, 80, 100, 125 mm In compliance with ISO 15552
More informationAG SERIES HYDRAULIC CYLINDERS 1.5 INCH 2 INCH 2.5 INCH 3 INCH 3.5 INCH 4 INCH 5 INCH BHC-8
AG SERIES HYDRAULIC CYLINDERS 1.5 INCH 2 INCH 2.5 INCH 3 INCH 3.5 INCH 4 INCH 5 INCH BOSS Hydraulics 19 Ricketts Rd, Mt Waverley, VIC 3149 P: +61 3 9562 8800 F: +61 3 9562 8080 E: sales@pthydraulics.com.au
More informationKEYSTONE PNEUMATIC ACTUATOR FIGURE 738
The F78 is a linear pneumatic actuator, designed especially for use on linear actuated valves FEATURES Suits all linear actuated valves. The Keystone F78 pneumatic actuator series is engineered to provide
More informationOriginal Line Cylinders
How to Order Introduction to Bimba Standard Air.3.4-.9.0-.65 Three-Position.66-.67 Air with Adjustable Cushions.68-.75 MRS.76-.86 Non-Rotating Air.87-.97 PC.98-.03 All Stainless Steel Repairable (Bell
More information4050A. Tire Changer. Parts Identification. For servicing single piece automotive and most light truck tire/wheel assemblies
4050A Tire Changer For servicing single piece automotive and most light truck tire/wheel assemblies Parts Identification READ these instructions before placing unit in service KEEP these and other materials
More informationAngle Seat Valve /2" up to 3"
1/ up to up to 428 F Pneumatically operated angle seat valve for the control of neutral and aggressive gases, liquids and steam. Compact design For temperatures from -22 F up to +428 F Working pressure
More information250 psi rating. series. pneumatic cylinders. bulletin 0606ST.
20 psi rating series ST pneumatic cylinders bulletin 0606ST www.royalcylinders.com i Contents Page Description 1 Mounting Styles 2 Features Description Mounting dimensions 3 STNM No Mount (MX0) 3 STME
More informationSERIES BCZ2D NOZZLE CYLINDER START-UP AND INFORMATION SHEET
Model Number Definition SERIES BCZD NOZZLE CYLINDER START-UP AND INFORMATION SHEET IMPORTANT INFORMATION DO NOT DISCARD! Use this information sheet to assist with cylinder installation, setup and repair.
More informationwiper seal keeps contaminates from getting into cylinder by aggressively wiping foreign materials from the piston rod, enhancing the rod seal life.
NPA Aluminum & Steel Cylinders NPA Series A Aluminum & J Steel Cylinders 1-1/2 to 12 inch bore size Impact dampening seals Adjustable captive cushion needle Ecology cylinders meet OSHA noise standards
More informationRL-H80 PARTS LIST # H USE THIS PARTS LIST FOR: Hoist Serial Number 2733 to
RL-H80 PARTS LIST # 102837H USE THIS PARTS LIST FOR: Hoist Serial Number 2733 to For older hoists use the following: Parts List No. 102837G for Serial Number 2485 to 2732 IF YOUR HOIST DOES NOT FALL WITHIN
More informationA SERIES. Heavy-Duty Pneumatic Cylinders Pressure Rating 250 PSI
A SERIES Heavy-Duty Pneumatic Cylinders Pressure Rating 250 PSI 1, 2, 6, 43 Heads, Caps, Retainers, Mountings The heads, retainers, and mountings, are machined from steel. The trunnion head, flanges and
More informationD5 & 10-5 SERIES AIR OPERATED LIQUID PUMPS
D & 1- SERIES AIR OPERATED LIQUID PUMPS PRESSURE RATIO OLD & NEW PART NUMBERS In the mid 199 s with the advent of a new inventory and computer system, SC Hydraulic Engineering was forced to change the
More informationHH SERIES: HEAVY DUTY INDUSTRIAL HYDRAULIC TRD BIMBA. company
HH SERIES: HEAVY DUTY INDUSTRIAL HYDRAULIC TRD a BIMBA company The TRD difference... Precision machined throughout. We started in business as precision machinists. Every component is machined in a manner
More informationRL-F60 PARTS LIST # I USE THIS PARTS LIST FOR: Hoist Serial Number 6745 to
RL-F60 PARTS LIST # 102692I USE THIS PARTS LIST FOR: Hoist Serial Number 6745 to For older hoists use the following: Parts List No. 102692H for Serial Number 2640 to 6744 IF YOUR HOIST DOES NOT FALL WITHIN
More informationRP SERIES 200 psi Mill-type Cylinder
Actuation Solutions and Systems for the SERIES 200 psi Mill-type Cylinder Delivering superior long-term performance and value Designed and engineered for severe-service applications Bore Size: 2 to 20
More informationDouble-Wall Cylinders/Repairable Stainless Steel Cylinders
Double-Wall Cylinders/Repairable Stainless Steel Cylinders Double-Wall Cylinders 6.3-6.15 Repairable Stainless Steel Cylinders 6.16-6.24 DW/RSS Cylinders Bimba Double-Wall Cylinders The Bimba Double-Wall
More informationStainless Steel Flat-I The Corrosion Resistant, IP69K Rated Solution for Low Profile Applications. We make things MOVE
Stainless Steel Flat-I The Corrosion Resistant, IP69K Rated Solution for Low Profile Applications We make things MOVE Stainless Steel Flat-I Stainless Steel Flat-I Cylinders are designed specifically for
More informationPARTS MANUAL KA-3500PT PISTON TYPE PUMP INDEX
PARTS MANUAL KA-500PT PISTON TYPE PUMP INDEX - Parts Page Drawing page - Fluid End Detail page - Piston Assembly, Liner & Pony Rod Detail page - Water Manifold Assembly Detail page 5 - Oil Manifold Assembly
More informationALLENAIR ROTARY INDEX TABLES
SOLENOID PRESSURE PILOT BLEED PILOT BASIC TABLE ALLENAIR ROTARY INDEX are precision indexing mechanisms... unsurpassed in accuracy, performance and dollar value. We know of no other Tables of equal accuracy
More informationWSL-Series. WSL- Series
WSL-Series WSL- Series Click the appropriate link below for the major component of the liftgate for which you are trying to find the correct part. If you are unsure of the name of the part in Waltco terminology,
More informationTable of Contents Tiny Titan Series Features and Benefits How to Order Optional Features
Table of Contents Tiny Titan Series. 3-22 Features and Benefits.................. 3 How to Order......................... 4 Optional Features..................... 5 Basic and Front Flange Mounts..........
More information