Series M Solid state to -56/Z76-59/Y59-5P/Y7P -J59/Y59-59/Y7N Surge absorber (+) Reverse flow prevent diode ( ) (+) ( ) (+) ( ) (+) (+) ( )

Size: px
Start display at page:

Download "Series M Solid state to -56/Z76-59/Y59-5P/Y7P -J59/Y59-59/Y7N Surge absorber (+) Reverse flow prevent diode ( ) (+) ( ) (+) ( ) (+) (+) ( )"

Transcription

1 asic iring Solid state 3 wire NPN (hen power source for and load is not common.) Sink input specifications 3-wire NPN Switch 3-wire N connection for NPN output (using relays) Series M uto Switch onnections and Examples 3 wire PNP 2 wire 2 wire Switch IN Relay Relay OM IN OM Examples of onnection to P P internal P internal Relay contact 2-wire with 2 N connection hen two es are connected in series, a load may malfunction because the load voltage will decline when in the ON state. he indicator lights will light up if both of the es are in the ON state. voltage at ON = Power Supply Internal voltage voltage x 2 pcs. drop = 24V 4V x 2 pcs. = 16V Example: Power supply is 24V, Internal voltage drop in is 4V 2 wire Source input specifications 3-wire PNP Switch Switch 2-wire with 2 OR connection onnection Examples for N (Serial) and OR (Parallel) IN OM IN OM P internal P internal N connection for NPN output (performed with es only) he indicatior lights will light up when both es are turned ON. voltage at O = eakage current x 2 pcs. x = 1m x 2 pcs. x 3kΩ = 6V Example: impedance is 3kΩ eakage current from is 1m 2 wire Indicator light protection, etc. Indicator light protection, etc. onnect according to the applicable P input specifications, as the connection method will vary depending on the P input specifications. OR connection for NPN output <Solid state> hen two es are connected in parallel, malfunction may occur because the load voltage will increase when in the O state. impedance <> ecause there is no current leakage, the load voltage will not increase when turned O. owever, depending on the number of es in the ON state, the indicator lights may sometimes dim or not light up, because of dispersion and reduction of the current flowing to the es.

2 Series M Solid state to -56/Z76-59/Y59-5P/Y7P -J59/Y59-59/Y7N Surge absorber (+) Reverse flow prevent diode ( ) (+) ( ) (+) ( ) (+) (+) ( ) hoke coil (+) Power voltage ( ) (+) -5P/Y7P -J /Z /-44 -J59/Y7/Y7-5 -G39 (+) to ( ) to ± 2nd terminal to 2nd terminal Surge absorber ( ) () ± (+) ( ) (+) hoke coil Surge absorber (+) 1st terminal 2nd terminal ( ) 3rd terminal (+) -K39 hoke coil N (±) to (±) (Red) (+) 1st terminal (+) to 1st terminal -Z73 (+) 1st terminal -59 Indicator light/operation Operation range 2nd terminal (+) ON Indication Red Green Red -P5 (Normal output) (iagnostic output) Orange ( ) (+) ( ) (+) (Normal output) iagnosis (iagnostic output) Orange ( ) ontact protection box -P11 -P12 hoke coil (+) O (+) to Suitable operating point (±) ( ) ±

3 Simple specials Symbol Series M Simple Special Made to Order 1 -X to hange of rod end shape X3 ontact P/ for the detailed specifications, delivery and prices. he following special products are treated in the simple order made system. edicated simple special specification information and -ROM's are available. Please contact P/ sales representatives. Non-rotating ow Single rod ouble rod rod Enk lock escriptions friction M Page M Q M 2 -X14 hange of trunnion bracket mounting position Order Made Symbol 1 -X5 Oversized rod cylinder 3 -X13 ow speed cylinder (5 to mm/s) 4 -X3 Special port position 5 -X4 ith heavy duty scraper 6 -X5 eat resistant cylinder (11 ) 7 -X6 Piston rod and rod end nut made of stainless steel 8 -X7 ie rod, cushion valve, tie rod nut, etc. made of stainless steel 9 -X8 djustable stroke cylinder/djustable extend stroke 1 -X9 djustable stroke cylinder/djustable retract stroke 11 -X1 ual stroke cylinder/ouble rod 12 -X11 ual stroke cylinder/single rod 13 -X12 andem cylinder 14 -X22 luorine rubber seals 15 -X27 ouble clevis pin and double knuckle pin made of stainless steel 16 -X29 ouble knuckle joint with spring pin 17 -X3 ront trunnion 18 -X35 ith coil scraper escriptions 2 -X6 eat resistant cylinder (1 ) Single rod M ouble rod Non-rotating rod ow friction M Q Enk lock M P.39 P. Page P.41 P.42 P.43 P.44 Order Made

4 Series M 1 Simple Special hange of Rod End Shape -X to X3 Rod end shape except standard style for actuator is provided in patterns. Series ction pplicable pattern symbols Standard M X-3 ouble acting double rod X-3 M Non-rotating rod X, 1, 6, 1, 11, 13, 14, 17, 19, 21 ow friction M Q X-3 End lock M X-3 1) P/ will make appropriate arrangements if no dimensional, tolerance, or finish instructions are given in the diagram. 2) he standard dimensions marked with "*" can be obtained from the rod diameter () as follows. Please specify any dimensions that are to be different. Symbol: Symbol: 1 Symbol: 2 Symbol: 3 ø Symbol: 12 Symbol: 13 Symbol: 14 Symbol: 15 Symbol: 16 Symbol: 17 Symbol: 18 Symbol: 19 K Symbol: 28 Symbol: 29 Symbol: 3 R sphere.5 ø ør 1 ø ø ør.5 file chamfer 1 K 6-1mm 6< -2mm > -4mm 3) In case of a double rod type and a single acting retraction type, enter the dimension with the rod retracted. 4) In case of a double rod type, the change is applicable to a single side only. Symbol: 4 Symbol: 5 Symbol: 6 Symbol: 7 Symbol: 8 Symbol: 9 Symbol: 1 Symbol: 11 ø R sphere.5 ø K 1 ø P R sphere ø ør ø Symbol: 2 Symbol: 21 Symbol: 22 Symbol: 23 ø ø Symbol: 24 Symbol: Symbol: 26 Symbol: 27 ø ø ø 39

5 2 hange of runnion racket Position -X14 etween front cover and rear cover ront trunnion Rear trunnion ction bracket only ll specifications except for the above are the same as those ore size Symbol -X X Stroke 97 + Stroke Stroke Stroke Stroke Stroke Min Precautions 1) Enter "Z + 1/2 stroke" when ordering with the model no. except -X14/ and enter trunnion. 2) P/ will make appropriate arrangements if no dimensional, tolerance, or finish instructions are given in the diagram. 3) he possible ranges for the trunnion bracket mounting position are indicated in the table below. 4) onsult with P/ when one of the auto es cannot be mounted because of trunnion mounting position. Z + 1/2 Stroke -X14 Max 94 + Stroke 96 + Stroke 18 + Stroke 15 + Stroke 13 + Stroke Stroke Simple Special Series M n air cylinder on which the position for mounting the trunnion bracket can be moved from the standard mounting position to a desired position. M Standard model no. hange of MQ trunnion bracket mounting position Z + Stroke Z + 1/2 Stroke runnion position: -X14 Z + Stroke X14 runnion mounting position runnion position: -X14 Reference: Standard (enter trunnion) /2 Stroke /2 Stroke /2 Stroke /2 Stroke /2 Stroke /2 Stroke Minimum stroke (mm)

6 1 M 2 eat Resistant ylinder (1 ) -X6 n air cylinder in which the materials of the seals and the grease have been changed so that the cylinder can be operated at high ambient temperatures of up to 1. M Standard model no. X6 eat Resistant ylinder (1 ) ction mbient temp. 1 to 1 uto Unavailable for mounting ir cushion Material luorine rubber Grease eat resistant grease he specifications and dimensions other than the above are the same as those 3 Oversized Rod ylinder -X5 Standard model no. ction uto Effective thread K ore size (mm) Series M Made to Order ontact P/ for the detailed specifications, delivery and prices. cylinder that has been made stronger through the use of a piston rod with a larger diameter. It is used for long stroke applications that pose the risk of bending or buckling of the piston rod. (onsult with P/ if a lateral load must be applied to it.) idth across flats + Stroke Effective idth thread across length flats ow Speed ylinder -X13 (5 to mm/s) 3 35 X5 Strong rod cylinder,,,,, vailable for mounting Operates smoothly without sticking or slipping even at low speeds of 5 to mm/s. Note 1) o not lubricate this cylinder. M Standard model no. X13 ction Piston speed ow Speed ylinder 5 to mm/sec he specifications and dimensions other than the above are the same as those valve K M14 X 1.5 M18 X 1.5 M22 X 1.5 M22 X 1.5 M26 X 1.5 M3 X M M Q Special Port Position -X3 Standard model no. Special port position X3 Port position seen from the front Relation between Port Position and Valve Position Port valve Port valve Port valve Port valve Single clevis ouble clevis enter trunnion s shown in the above diagram, the symbols for the positions of the ports and cushion valves are as follows: viewed from the rod side, the top position is rendered ; then,,, and, in the clockwise direction. he style in which the ports and the cushion valves are combined is applicable only when the rod cover and the head cover are changed to the same positions. he part number "X3" does not exist with regard to the port and cushion valve positions, because this is the standard specification. 5 ith eavy uty Scraper -X4 M Standard model no. ction iper ring X4 valve position seen from the front ith eavy uty Scraper ir cushion/rubber bumper S scraper he specifications other than the above are the same as those of the standard type asic oot ront flange Rear flange Port valve Port valve Port valve Made Order ylinder changed connecting port position of rod/head cover and position of cushion valve. + Stroke s it uses a powerful scraper for the wiper ring, this cylinder is suitable for use in an area that is dusty, or in an environment in which mud splashes on the cylinder, such as when operating casting equipment, construction equipment, or an industrial vehicle

7 6 eat Resistant ylinder (11 ) -X5 cylinder in which the material of the seals has been changed to a heat resistant style (for up to 11 ) so that it can be operated under extreme ambient temperatures that exceed the standard specifications of between -1 and +7. M Standard model no. X5 eat Resistant ylinder ction mbient temp. uto Material (11 ) 1 to 11 Unavailable for mounting ir cushion luorine rubber he specifications and dimensions other than the above are the same as those 7 Piston Rod and Rod End Nut Made of Stainless Steel -X6 It is used in case there is the risk of rust or corrosion, such as when the end of the piston rod becomes immersed in water as it moves forward. M Standard model no. X6 Piston Rod and Rod End Nut M Q Made of Stainless Steel ction ir cushion he specifications and dimensions other than the above are the same as those 8 ie Rod, Valve, ie Rod Nut, etc. Made of Stainless Steel -X7 portion of the materials of the standard parts has been changed to stainless steel to enable the cylinder to be used in an area that poses the risk of rust or corrosion. M Standard model no. X7 ie Rod, Valve, M Q ie Rod Nut, etc. Made M of Stainless Steel ction ir cushion he specifications and dimensions other than the above are the same as those 9 djustable Stroke ylinder/djustable Extend Stroke -X8 M ore size Stroke dd'l symbol Stroke adjustment symbol X8 Stroke adjustment symbol Stroke adjustable range to mm djustable Stroke ylinder/ Stroke adjustable range to mm djustable Extend Stroke ction,,, type (G,, not available) Stroke adjustment system Stopper adjustment Stroke adjustment range : to mm, : to mm M MK M M M ore size Stroke dd'l symbol Stroke adjustment symbol X9 Stroke adjustment symbol M Q Stroke adjustable range to mm djustable Stroke ylinder/ Stroke adjustable range to mm djustable Retract Stroke MI djustable Stroke ylinder/djustable Retract Stroke 1 -X9 ction,,, type (G,, not available) Stroke adjustment system djusting bolt Stroke adjustment range : to mm, : to mm Made to Order Series M he stroke at return of the cylinder can be adjusted from full stroke ( to )mm or ( to )mm. stroke adjustment mechanism has been provided in the head portion to adjust the extend stroke. MK Stroke 4 M + djustable range M + Stroke + djustable range + 2 X Stroke + djustable range (:, : ) M M M12 X 1. M12 X 1. M2 X 1.5 M2 X 1.5 M24 X 1.5 M24 X 1.5 idth across flats M he retract stroke of the cylinder can be adjusted from ( to )mm or ( to )mm by the adjusting bolt. M M + djustable range + Stroke + djustable range (:, : ) M I 42

8 43 ual Stroke ylinder/ouble Rod 11 -X1 M ore size Stroke dd'l symbol G S ual Stroke ylinder/single Rod 12 -X11 Stroke dd'l symbol M ore size Stroke dd'l symbol Stroke dd'l symbol X1 X11 ual Stroke ylinder/ Single Rod ction ir cushion, Rubber bumper,,, G,, type ( not available) Series M Made to Order ontact P/ for the detailed specifications, delivery and prices. wo cylinders are constructed as one cylinder in a back-to-back configuration allowing the cylinder stroke to be controlled in three steps. ual Stroke ylinder/ ouble Rod ction ir cushion, Rubber bumper,,, G type (,, not available) Manufacturable max. stroke (+) ø: to 6, ø: to 7, ø to ø: to 9 Stroke S + Stroke ( + ) + Stroke ( + ) G S G Stroke S + Stroke ( + ) + Stroke ( + ) G Stroke wo cylinders can be integrated by connecting them in line, and the cylinder stroke can be controlled in two stages in both directions. ir releasing port Stroke andem ylinder 13 -X12 M Standard model no. X12 andem ylinder ction Min. operating pressure.1mpa ir cushion,,,g,, type ( not available) G 41 S luorine Rubber Seals 14 -X22 M Standard model no. ction Seals Made Order his is a cylinder produced with two air cylinders in line allowing double the output force G S + (2 X Stroke) + (2 X Stroke) X22 G 43 luorine Rubber Seals S luorine rubber 262 Material for seals is changed to fluorine rubber excellent in chemical resistance. he specifications and dimensions other than the above are the same as those

9 ront runnion 17 -X3 M Standard model no. X3 ront runnion MQ M ction bracket only Y øe8 ouble levis Pin and ouble Knuckle Pin Made of Stainless Steel 15 -X27 o prevent the oscillating portion of the double clevis or the double knuckle joint from rusting, the material of the pin and the snap ring (split pin) has been changed to stainless steel. he double clevis style is one way of installation support for standard air cylinders and the double knuckle joint is one of the pieces of hardware that are provided. M MQ M Y ouble Knuckle Joint with Spring Pin 16 -X29 o prevent loosening of the double knuckle joint of standard air cylinder. M Standard model no. M Q M Standard model no. ouble clevis style ouble knuckle joint P 3M,4M,5M,8M,1M M3,M5,M8 Z e X27 X29 Z X27 X27 ouble Knuckle Joint with Spring Pin Y ouble clevis pin made of stainless steel ouble knuckle joint pin made of stainless steel levis pin levis pin Knuckle pin Knuckle pin Stainless steel material Only double clevis style () Pin material Stainless steel (SUS34) otter pin, clevis pin and knuckle joint pin are attached to mounting bracket. hen a standard double acting single rod cylinder with a front trunnion bracket has a long stroke, the distance from the fulcrum to the rod end is reduced by mounting the trunnion on the front of the cylinder's rod cover. + Stroke Z Z ith oil Scraper 18 -X35 M Standard model no. X35 ith oil Scraper ction ir cushion, Rubber bumper Scraper oil scraper (Metal) Made to Order Series M Scraper removes frost, weld spatter, cutting dust, and etc., and it protects the seals Stroke

Reduced by Max. 58% Maximum allowable stroke when using clevis bracket CS2 CS Stroke (mm)

Reduced by Max. 58% Maximum allowable stroke when using clevis bracket CS2 CS Stroke (mm) ir ylinder 7. kg eight Reduced by Max. 58% ew arge ore Sizes ø15, ø, ø ighter installation achieved by reducing weight. Die cast rod cover and head cover used to achieve greater weight reduction. Rod bore

More information

ISO Standard Hydraulic Cylinder

ISO Standard Hydraulic Cylinder ISO Standard ydraulic ylinder Series S/SG Series S Q N Nominal pressure: S Pa ore size :,,,, Related quipment Series SG Nominal pressure: - Pa ore size : 3,,,,, 51 ISO Standard ydraulic ylinder Series

More information

Valve Mounted Cylinder. Action Built-in magnet. With air cushion. Double acting. Standard. Nonrotating rod. Standard. rod. Standard. rod.

Valve Mounted Cylinder. Action Built-in magnet. With air cushion. Double acting. Standard. Nonrotating rod. Standard. rod. Standard. rod. eries V/MVGQ,,,, 2,,,, 63,, eries Variations eries eries V ction uilt-in magnet With air cushion variations uilt-in One-touch fitting With auto switch With strong scraper Page RE RE X ouble acting -1-

More information

10%lighter. 1.7 kg. 1.9 kg. Air Cylinder. New. Weight. Reduced weight by changing the shape of the rod cover and head cover. Series MB1 CAT.

10%lighter. 1.7 kg. 1.9 kg. Air Cylinder. New. Weight. Reduced weight by changing the shape of the rod cover and head cover. Series MB1 CAT. ir ylinder ø32, ø40, ø50, ø63, ø80, ø100, ø125 New RoS Weight (ø50-100 stroke) 10%lighter Existing model 1.9 kg New Series M1 1.7 kg Reduced weight by changing the shape of the rod cover and head cover.

More information

Series 25A-CJ2. Air Cylinder: Standard Type Double Acting, Single Rod. ø10, ø16 25A. How to Order. Auto switch mounting type

Series 25A-CJ2. Air Cylinder: Standard Type Double Acting, Single Rod. ø10, ø16 25A. How to Order. Auto switch mounting type Series -J2 ø0, ø6 magnet for switch, auto switch cannot be mounted. E M asic ouble-side bossed ouble clevis Single foot ouble foot ore size 0 0 mm 6 6 mm J2 6 60 Z M9W bracket is shipped together with

More information

10% lighter kg kg. Air Cylinder. MB Series. ø32, ø40, ø50, ø63, ø80, ø100, ø125

10% lighter kg kg. Air Cylinder. MB Series. ø32, ø40, ø50, ø63, ø80, ø100, ø125 ir Cylinder M Series ø3, ø40, ø50, ø63, ø80, ø00, ø5 RoHS 0% lighter CJ (ø40-00 stroke) Weight M Series 0.9 kg CJP CJ JCM CM Current model CM3 CG.0 kg CG3 JM Reduced weight by changing the shape of the

More information

Reed Switches/Direct Mounting Type D-Z73/Z76/Z80

Reed Switches/Direct Mounting Type D-Z73/Z76/Z80 Reed es/direct Mounting Type D-Z73/Z76/Z80 uto Internal Circuits Lead wire colors inside [ ] are old colors prior to conformity with IEC standards. D-Z73 Reed LED Resistor Zener diode Contact box (+) ()

More information

10 % lighter kg. Air Cylinder kg. New. New. Series. Added ø 125 to standard type.

10 % lighter kg. Air Cylinder kg. New. New. Series. Added ø 125 to standard type. ir Cylinder New ø 3, ø 40, ø 50, ø 63, ø 80, ø 100, ø 15 10 % lighter RoS (ø 40-100 stroke) Weight Existing model New 1.01 kg Series dded ø 15 to standard type. 0.91 kg Reduced weight by changing the shape

More information

Compact Cylinder. ISO Standard (21287) C55 Series. ø20, ø25, ø32, ø40, ø50, ø63, ø80, ø100. RoHS C85 C75 C96 C96Y C96K C55

Compact Cylinder. ISO Standard (21287) C55 Series. ø20, ø25, ø32, ø40, ø50, ø63, ø80, ø100. RoHS C85 C75 C96 C96Y C96K C55 55 96Y 96K 96 P96K P96 75R 75K-S/T 75K 75-S/T 75W 75 85R 85K-S/T 85K 85-S/T 85W 85 ø20, ø25, ø32, ø40, ø50, ø63, ø80, ø100 Related ade to uto Products Order Switch ompact ylinder 55 Series ISO Standard

More information

-XC11: Dual Stroke Cylinder/Single Rod Type

-XC11: Dual Stroke Cylinder/Single Rod Type Made to Order ommon Specifications: -X11: Dual Stroke ylinder/single Rod Type 23 Dual Stroke ylinder/single Rod Type Two cylinders can be integrated by connecting them in line, and the cylinder stroke

More information

% lighter. Air Cylinder. New. New RoHS. 1.31kg. Series CA2. Reduced weight by changing the shape of the rod cover and head cover.

% lighter. Air Cylinder. New. New RoHS. 1.31kg. Series CA2. Reduced weight by changing the shape of the rod cover and head cover. ir ylinder Ø 40, Ø 50, Ø 63, Ø 80, Ø 100 Reduced weight by changing the shape of the rod cover and head cover. Weight reduced by up to New RoS 15 (Ø 50-50 stroke) % lighter 1.31kg New 1.54 kg Existing

More information

Small Bore Hydraulic Cylinder

Small Bore Hydraulic Cylinder Small ore ydraulic Cylinder CN Series CQ CK CN CM CS C C D- CN Series Nominal pressure: MPa ore size :,,, Stainless Steel Tube Small ore ydraulic Cylinder for MPa CN Series ø, ø, ø, ø Equipped with cushion

More information

Round Type Hydraulic Cylinder

Round Type Hydraulic Cylinder Round Type ydraulic Cylinder Series CM CQ Series CM CK C CM CS C2 C ominal pressure: 3. MPa ore size :,,, 233 3. MPa Round Type ydraulic Cylinder Series C M ø, ø, ø, ø With uto Switch ow to Order CM L

More information

ISO Standard Hydraulic Cylinder

ISO Standard Hydraulic Cylinder IO tandard ydraulic ylinder eries / eries eries Nominal pressure: a ore size :,,,, Q N Related quipment - Nominal pressure: a ore size : 3,,,,, 4 IO tandard ydraulic ylinder eries Nominal pressure a/ a

More information

Cylinder with Lock CNA. ø40, ø50, ø63, ø80, ø100 Suitable for intermediate stops, emergency stops and drop prevention

Cylinder with Lock CNA. ø40, ø50, ø63, ø80, ø100 Suitable for intermediate stops, emergency stops and drop prevention ylinder with Lock Series ø, ø, ø, ø, ø Suitable for intermediate stops, emergency stops and drop prevention Simple construction force magnifying mechanism is employed based on the wedge effect of the taper

More information

Cylinder with Lock. MNB Series. A locking cylinder ideal for intermediate stops, emergency stops and drop prevention. ø32, ø40, ø50, ø63, ø80, ø100

Cylinder with Lock. MNB Series. A locking cylinder ideal for intermediate stops, emergency stops and drop prevention. ø32, ø40, ø50, ø63, ø80, ø100 ylinder with Lock M Series ø, ø, ø, ø, ø, ø locking cylinder ideal for intermediate stops, emergency stops and drop prevention. Simple construction force magnifying mechanism is employed based on the wedge

More information

Hygienic Design Cylinder

Hygienic Design Cylinder ygienic Design ylinder Series Y water resistant cylinder configured for easy cleaning Series Y ISO standard type Series Y asic type Series YQ With guide Series YG J G Y Series 0 0 External seal material

More information

Position locking clamp cylinder. UCAC2 Series. Bore size: ø50, ø63. Double acting single rod type

Position locking clamp cylinder. UCAC2 Series. Bore size: ø50, ø63. Double acting single rod type Position locking clamp cylinder U2 Series : ø50, ø63 XXXXX Series Specifications JIS symbol Descriptions U2 mm ø50 ø63 ctuation Double acting Working fluid ompressed air Max. working pressure MPa 1.0 Min.

More information

15% lighter. Air Cylinder. New. 1.31kg. Series CA2 CAT.ES20-222A. Reduced weight by changing the shape of the rod cover and head cover.

15% lighter. Air Cylinder. New. 1.31kg. Series CA2 CAT.ES20-222A. Reduced weight by changing the shape of the rod cover and head cover. ir ylinder ø, ø, ø, ø, ø Reduced weight by changing the shape of the rod cover and head cover. Weight reduced by up to ew RoS (ø- stroke) % lighter 1.31kg ew 1.54 kg Existing model Easy air cushion control

More information

How to Order 1 T Z A. r Pressure range. 05 Pressure range 0 to 0.5 MPa 10 Pressure range 0 to 1 MPa 16 Pressure range 0 to 1.6 MPa

How to Order 1 T Z A. r Pressure range. 05 Pressure range 0 to 0.5 MPa 10 Pressure range 0 to 1 MPa 16 Pressure range 0 to 1.6 MPa oolant Valve Series S External pilot solenoid S ir operated S How to Order 0 0 Y 0 0 T Z q w e r t y u i o!0!!!!! q Series S00 S00 S00 w Valve type ormally closed ormally open e Seal material R FKM r Pressure

More information

ISO Standard Hydraulic Cylinder

ISO Standard Hydraulic Cylinder IO tandard ydraulic ylinder eries / eries eries Nominal pressure: a ore size :,,,, Q N Related quipment - Nominal pressure: a ore size : 3,,,,, ourtesy of teven ngineering, Inc.- Ryan Way, outh an rancisco,

More information

Pin Cylinder. Series CJP. Double Acting/Single Acting Spring Return. Standard Variation Built-in Magnet. Single Rod. Single Rod Spring return

Pin Cylinder. Series CJP. Double Acting/Single Acting Spring Return. Standard Variation Built-in Magnet. Single Rod. Single Rod Spring return Pin Cylinder eries ouble cting/ingle cting pring Return Variations eries tandard tyle eries With uto witch ouble cting (Non-lube) ingle cting (Non-lube) ction ingle Rod ingle Rod pring return tandard Variation

More information

Air Slide Table Series MXP

Air Slide Table Series MXP ir Slide Table Series XP ø, ø, ø, ø, ø1 X XU XS X XF X X XP XY TS - -X Individual -X 19 igh rigidity, igh precision Cylinder is built into the rail of the linear guide. aterial of body and guide block

More information

How to Order. Nil M. Action S T. Load voltage Wiring. M9NV 5 V, 12 V 3-wire (PNP) M9PV 12 V. F9NWV 5 V, 12 V 3-wire (PNP) F9PWV

How to Order. Nil M. Action S T. Load voltage Wiring. M9NV 5 V, 12 V 3-wire (PNP) M9PV 12 V. F9NWV 5 V, 12 V 3-wire (PNP) F9PWV ompact ylinder: Standard Type Single cting, Single Rod, Spring Return/Extend Series QS ø, ø, ø, ø How to Order QS S QS S FWV S uilt-in magnet Mounting style Through-hole/oth ends tapped common (Standard)

More information

How to Order D 30 D M9BW. Made to Order Specifications Bore size Number of. Rod end configuration Cylinder stroke (mm) Nil

How to Order D 30 D M9BW. Made to Order Specifications Bore size Number of. Rod end configuration Cylinder stroke (mm) Nil With auto switch RSG RSDG With auto switch (uilt-in magnet) uilt-in Magnet Cylinder Model If a built-in magnet cylinder without an auto switch is required, there is no need to enter the symbol for the

More information

CJ2-Z. Cushion. Rubber bumper (Standard) Air cushion

CJ2-Z. Cushion. Rubber bumper (Standard) Air cushion eries ow to Order 1/ /22 J2 ø1, ø ir ylinder Ro lean series 1 ushion Rubber bumper (tandard) ir cushion 1 J 2 L R M9W 21 J 2 L R M9W opper, fluorine and siliconefree + Low particle generation 21 22 Vacuum

More information

Air Cylinder: Standard Type Double Acting, Single Rod. How to Order. Standard stroke (mm) ø6 15, 30, 45, 60. Cushion Nil A

Air Cylinder: Standard Type Double Acting, Single Rod. How to Order. Standard stroke (mm) ø6 15, 30, 45, 60. Cushion Nil A ø, ø, ø L F D Without auto switch With auto switch style asic style Axial foot style Rod side flange style Double clevis style (Except ø) ore size mm mm mm How to Order Standard stroke (mm) ø,,, ø,,,,

More information

Flame hardening steel. The height from the reference hole to the surface of the reference support block can be selected from 2 types HIGH or LOW.

Flame hardening steel. The height from the reference hole to the surface of the reference support block can be selected from 2 types HIGH or LOW. is separated from the reference. INFORMTION Responses to reduction of spare parts, short lead times, and a drastic reduction of special orders Pin Plate ylinder ( machinable type) 1 HIGH type Flame hardening

More information

Series MBB ø32, ø40, ø50, ø63, ø80, ø100

Series MBB ø32, ø40, ø50, ø63, ø80, ø100 Air Cylinder/End ock Series ø, ø, ø, ø, ø, ø ow to Order Standard ith auto switch MD A F G C D T uilt-in magnet Mounting asic/ithout bracket Axial foot Front flange Rear flange Single clevis Double clevis

More information

NAAMS Standards Compliant Power Clamp Cylinder ø50, ø63

NAAMS Standards Compliant Power Clamp Cylinder ø50, ø63 NORMTON NMS Standards ompliant Power lamp ylinder ø5, ø6 Weight reduced by up to 8% luminum body with greatly reduced weight Suitable for robot material handling ore size KZ2N a New KZN-X2742 Reduction

More information

Standard Type Dual-Rod Cylinder. ø6, ø10, ø15, ø20, ø25, ø32. How to Order

Standard Type Dual-Rod Cylinder. ø6, ø10, ø15, ø20, ø25, ø32. How to Order Standard Type ual-rod ylinder Series ø, ø, ø, ø, ø2, ø32 ompact Type J M L M earing type Slide bearing all bushing bearing How to Order 0 Y7W S Number of auto switches Nil 2 pcs. S pc. n "n" pcs. ore size/standard

More information

15% Weight reduced. Cycle time shortened. Lightweight. CP96 Series. ISO Cylinder ISO Standard (15552)

15% Weight reduced. Cycle time shortened. Lightweight. CP96 Series. ISO Cylinder ISO Standard (15552) ISO ylinder ISO Standard (15552) P96 Series ø32, ø40, ø50, ø63, ø80, ø100 RoS 85 Lightweight Up * ompared with the previous P96 series (ø40, 100 mm stroke) 15% Weight reduced By adopting a new cushion

More information

Air Cylinder. New. New RoHS. 6 types. Series CJ2. are. added to the mounting types. 4 types 7 types

Air Cylinder. New. New RoHS. 6 types. Series CJ2. are. added to the mounting types. 4 types 7 types ir Cylinder Ø 6, Ø 1, Ø New RoS Double foot ead flange Double-side bossed added to the mounting types. 4 types 7 types New or Ø 6, 3 types are 6 types Double foot Double-side bossed ead flange ead cover

More information

Pin Cylinders. Series CJP2/CJP. 2 auto switches can even be mounted on a cylinder with ø4 bore size (5 mm stroke). One-touch fitting can be connected.

Pin Cylinders. Series CJP2/CJP. 2 auto switches can even be mounted on a cylinder with ø4 bore size (5 mm stroke). One-touch fitting can be connected. Pin ylinders eries JP/JP auto switches can even be mounted on a cylinder with ø ( mm stroke). uto switch One-touch fitting can be connected. (Panel mount type) ø One-touch fitting, miniature fitting, and

More information

Hygienic Design Cylinder

Hygienic Design Cylinder CT.EUS- -UK Hygienic Design Cylinder New Round type Series HY has been added. water resistant cylinder configured for easy cleaning ISO standard type Series HYC asic type Series HYQ With guide Series HYG

More information

CAT.ES20-85 F. Air Cylinder. ø125 newly introduced. Series MB. ø32,ø40,ø50,ø63,ø80,ø100,ø125

CAT.ES20-85 F. Air Cylinder. ø125 newly introduced. Series MB. ø32,ø40,ø50,ø63,ø80,ø100,ø125 M..3 : PM Page i CT.ES-8 F ir Cylinder ø newly introduced Series M ø,ø,ø,ø,ø,ø,ø Series M, MW, MK, Double acting single rod Double acting double rod Double acting non-rotating rod ø newly introduced (Double

More information

Air Cylinder. New RoHS. Series CG1. Female rod end available as standard. Rod end styles suitable for the application can be selected.

Air Cylinder. New RoHS. Series CG1. Female rod end available as standard. Rod end styles suitable for the application can be selected. ir Cylinder ø 20, ø 25, ø 32, ø 40, ø 50, ø 63, ø 80, ø 100 New RoS Female rod end available as standard Selectable Rod end styles suitable for the application can be selected. Female thread Male thread

More information

3 Position Cylinder. RZQ Series. Provides intermediate stop mechanism. ø32, ø40, ø50, ø63. 2-stage stroke enabled with a small increase in length

3 Position Cylinder. RZQ Series. Provides intermediate stop mechanism. ø32, ø40, ø50, ø63. 2-stage stroke enabled with a small increase in length Position ylinder Series ø, ø, ø, ø Provides intermediate stop mechanism 2-stage stroke enabled with a small increase in length Overall length of cylinder tube DQ2 Full stroke First-stage stroke dditional

More information

Made to Order Common Specifications

Made to Order Common Specifications to Common to Common P..4-1 q-xa to A3 Change of rod end shape w-xb Oversized rod e- Heat resistant (1 C) r-xb7 Cold resistant t-xb9 Low speed y-xb1 Intermediate stroke (Exclusive body use) u-xb11 Long

More information

CAT.ES A. Pin Clamp Cylinder. Positioning and clamping at one time! Construction. Guide pin. Clamp arm (When unclamped) 10 mm.

CAT.ES A. Pin Clamp Cylinder. Positioning and clamping at one time! Construction. Guide pin. Clamp arm (When unclamped) 10 mm. C.ES2- in Clamp Cylinder Clamp! ositioning and clamping at one time! Construction Guide pin (When unclamped) 1 mm Series CKQ/CLKQ Multiple combinations are possible. position can be selected from 4 different

More information

Hydraulic Cylinder. (Conforms to ISO) Nominal pressure 10MPa/16MPa. Series CHS. 50% or 52% of series CH2

Hydraulic Cylinder. (Conforms to ISO) Nominal pressure 10MPa/16MPa. Series CHS. 50% or 52% of series CH2 CT.ES1- ydraulic Cylinder (Conforms to ISO) Series CS Nominal pressure Pa/Pa Reduced projection area: 6 % or less compared to series C CS/asic Reduced overall length + Stroke CS/ CS C C aximum weight:

More information

1.7 kg. % lighter. 1.9 kg. Air Cylinder. Weight MB1. Reduced weight by changing the shape of the rod cover and head cover.

1.7 kg. % lighter. 1.9 kg. Air Cylinder. Weight MB1. Reduced weight by changing the shape of the rod cover and head cover. Air Cylinder 1 Series ø32, ø40, ø50, ø63, ø80, ø100, ø125 RoHS 10 (ø50-100 stroke) % lighter Current model 1.9 kg 1 Series 1.7 kg J 1 Reduced weight by changing the shape of the rod cover and head cover.

More information

16% lighter Existing model

16% lighter Existing model ir Cylinder ø3, ø40, ø50, ø63, ø80, ø00 New RoS Weight (ø63-00 stroke) 6% lighter Existing model New Series.0 kg.69 kg Reduced weight by changing the shape of the rod cover and head cover. Series/ set

More information

Series MK ø12, ø16, ø20, ø25, ø32, ø40, ø50, ø63

Series MK ø12, ø16, ø20, ø25, ø32, ø40, ø50, ø63 otary lamp ylinder/standard Series MK ø, ø, ø, ø, ø, ø, ø5, ø ow to Order MK 1 3 S otary clamp cylinder Mounting Symbol Style ore size Through hole & both ends tapped (Standard) ø, ø oth ends tapped Through

More information

King Of Valve Co.,Ltd.

King Of Valve Co.,Ltd. Series variation Series Series Series variation SCP* SCP* U Variation Double acting lubrication type Double acting oil-free type, with switch Double acting Stroke adjustable type (Extended) Double acting

More information

Series CNS. Cylinder with Lock Double Acting, Single Rod - X X1166. ø125, ø140, ø160. How to Order. Without auto switch With auto switch

Series CNS. Cylinder with Lock Double Acting, Single Rod - X X1166. ø125, ø140, ø160. How to Order. Without auto switch With auto switch ylinder with Lock ouble Acting, Single Rod Series S ø1, ø, ø ow to Order Without auto switch With auto switch S S L L 1 1 1 1 - X16 - X16 uilt-in magnet L 1 ounting style asic style oot style Rod side

More information

Round Type Hydraulic Cylinder

Round Type Hydraulic Cylinder Round Type ydraulic Cylinder CM Series CQ CK C CM CS C C D- CM Series ominal pressure: 3. MPa ore size :,,, 3 3. MPa Round Type ydraulic Cylinder CM Series ø, ø, ø, ø pplicable uto Switches/Refer to pages

More information

Air Cylinder. CG1 Series. Female rod end available as standard. Rod end types suitable for the application can be selected.

Air Cylinder. CG1 Series. Female rod end available as standard. Rod end types suitable for the application can be selected. ir Cylinder Series ø20, ø25, ø32, ø40, ø50, ø63, ø80, ø100 RoHS emale rod end available as standard Rod end types suitable for the application can be selected. emale thread Easy fine adjustment of auto

More information

Compact Cylinder. Series CQS CUJ CU CQS CQ2 RQ CQM MU

Compact Cylinder. Series CQS CUJ CU CQS CQ2 RQ CQM MU Compact Cylinder Series ø, ø, ø, ø Ideal for machine designs with small space requirements The D-M auto switch will not protrude from switch mounting groove. Square body shape gives you flexibility for

More information

Clamp Cylinder with Lock

Clamp Cylinder with Lock Clamp Cylinder with ock CK Series aintains a clamped or unclamped state when air supply pressure drops or residual pressure is released. Total length reduced by mm ody is shortened while maintaining the

More information

Air Cylinder: With End Lock. How to Order. Port thread type. Cylinder stroke (mm) For more information, please refer to the next page.

Air Cylinder: With End Lock. How to Order. Port thread type. Cylinder stroke (mm) For more information, please refer to the next page. ir Cylinder: With End ock Series C ø, ø, ø, ø, ø Without auto switch With auto switch F G C D T With auto switch Mounting style asic style xial foot style Rod side flange style Head side flange style Single

More information

1.56 L INEAR A CTUATORS: AIR C YLINDERS S ERIES CA1

1.56 L INEAR A CTUATORS: AIR C YLINDERS S ERIES CA1 1.56 L INEAR A CTUATORS: AIR C YLINDERS A IR C YLINDER Auto switch sensing optional s Ø4, 5, 63, 8, 1 Non-rotating piston rod & double rod types available Ultra low friction, maximum 5% Long life, high

More information

Air Cylinder. New RoHS. Series CM2. Female rod end available as standard. Rod end styles suitable for the application can be selected.

Air Cylinder. New RoHS. Series CM2. Female rod end available as standard. Rod end styles suitable for the application can be selected. ir Cylinder ø20, ø25, ø32, ø40 New RoS Female rod end available as standard Selectable Rod end styles suitable for the application can be selected. Female thread Male thread Easy fine adjustment of auto

More information

3 Position Cylinder. ø32, ø40, ø50, ø63 RZQ CDQ2. Bore size (mm)

3 Position Cylinder. ø32, ø40, ø50, ø63 RZQ CDQ2. Bore size (mm) Position ylinder Series ø, ø, ø, ø Provides intermediate stop mechanism 2-stage stroke enabled with a small increase in length Overall length of cylinder tube First-stage stroke Full stroke dditional cylinder

More information

15% lighter. Air Cylinder. New. New. 1.31kg. Series CA2 CAT.ES20-222B. Reduced weight by changing the shape of the rod cover and head cover.

15% lighter. Air Cylinder. New. New. 1.31kg. Series CA2 CAT.ES20-222B. Reduced weight by changing the shape of the rod cover and head cover. ir ylinder ø40, ø50, ø63, ø80, ø100 Reduced weight by changing the shape of the rod cover and head cover. Weight reduced by up to ew RoS (ø63-50 stroke) 15% lighter 1.31kg ew 1.54 kg Existing model Easy

More information

CAT.ES C. Compact Guide Cylinder. SeriesMGP. ø12, ø16, ø20, ø25, ø32, ø40, ø50, ø63, ø80, ø100. New end lock type introduced to Series MGP

CAT.ES C. Compact Guide Cylinder. SeriesMGP. ø12, ø16, ø20, ø25, ø32, ø40, ø50, ø63, ø80, ø100. New end lock type introduced to Series MGP CT.S-7 C Compact Guide Cylinder Series ø, ø, ø, ø2, ø, ø, ø, ø, ø, ø0 New end lock type introduced to Series . Top mount Compact Guide Cylinder Series ø, ø, ø, ø2, ø, ø, ø, ø, ø, ø0 Four mounting types

More information

Compact Guide Cylinder

Compact Guide Cylinder Compact Guide Cylinder Series ø, ø, ø, ø, ø, ø, ø, ø, ø, ø ir cylinder with guide integrated that has achieved anti-lateral load and high non-rotating accuracy. Space-saving cylinder. Suitable as stoppers

More information

Small Bore Hydraulic Cylinder

Small Bore Hydraulic Cylinder Small ore ydraulic Cylinder CN Series CQ CK CN CM CS C C D- CN Series Nominal pressure: MPa ore size :,,, Stainless Steel Tube Small ore ydraulic Cylinder for MPa CN Series ø, ø, ø, ø Equipped with cushion

More information

Air Cylinder. ø125, ø140, ø160, ø180, ø200, ø250, ø300. Lube. Single rod. Non-lube. Series. Air-hydro. Lube. Double rod. Non-lube CS1W.

Air Cylinder. ø125, ø140, ø160, ø180, ø200, ø250, ø300. Lube. Single rod. Non-lube. Series. Air-hydro. Lube. Double rod. Non-lube CS1W. Air ylinder Series S,,,,,, Series Variations Series Action asic Standard variations Page J JP J Standard Series S Series S Double acting Single rod Series S Double rod Series SW 4 4 M G M M A S S Series

More information

Miniature Guide Rod Cylinder ±0.1. Mounting from 2 directions

Miniature Guide Rod Cylinder ±0.1. Mounting from 2 directions Miniature Guide Rod Cylinder Series Non-rotating accuracy : Height ±0.1 Mounting from 2 directions idth Overall length Two auto switches can be mounted even for mm strokes Integral wiring/piping to one

More information

Air Slide Table. ø8, ø12, ø16, ø20, ø25. Linear guide table provides long stroke. Table rigidity is constant throughout entire stroke.

Air Slide Table. ø8, ø12, ø16, ø20, ø25. Linear guide table provides long stroke. Table rigidity is constant throughout entire stroke. ir Slide Table Series MX ø, ø2, ø, ø2, ø2 inear guide table provides long stroke. Table rigidity is constant throughout entire stroke. ong stroke (Max. mm) inear guide provides long stroke, and it obtains

More information

Air Cylinder. New RoHS. Series CJ2. are. added to the mounting types. Improved amount of mounting freedom Head cover with boss is added.

Air Cylinder. New RoHS. Series CJ2. are. added to the mounting types. Improved amount of mounting freedom Head cover with boss is added. ir Cylinder ø1, ø16 Double foot Double-side bossed added to the mounting types. 4 types 7 types Improved amount of mounting freedom Head cover with boss is added. Head flange are Double foot Double-side

More information

Compact Rotary Actuator

Compact Rotary Actuator Compact Rotary ctuator Series Rack & Pinion Style/:,,,, : 17 mm : mm : 29 mm : 33 mm : 37 mm CR2 CRU2 CR1 MSU CRJ Rotation 360 type MSQ 360 MSZ MSQ MRQ Series Variations Page Rotating angle 80 to 0 170

More information

66 mm 21% Air Cylinder Short Type. New RoHS. Compact with a new construction! New release with full functions. Series CM mm.

66 mm 21% Air Cylinder Short Type. New RoHS. Compact with a new construction! New release with full functions. Series CM mm. ir Cylinder Short Type Compact with a new construction! New release with full functions Minimized with shorter total length! Space saving; contributes to downsizing of equipment. Up to mm shorter mm Up

More information

Electric Cylinder. LZB/LZC Series. It can be operated like an air cylinder. LZB Series. LZC Series LEF LEJ LEL LEM LEY LES LER LEH 25A- LEC

Electric Cylinder. LZB/LZC Series. It can be operated like an air cylinder. LZB Series. LZC Series LEF LEJ LEL LEM LEY LES LER LEH 25A- LEC Electric Cylinder LZB/LZC Series It can be operated like an air cylinder. LZB Series LZC Series Model LZB LZC Max. thrust Max. speed 196 N 0 mm/s Lead screw Slide screw: ø8, ø Lead: 2, 6, Stroke 25, 40,

More information

Series CQS. Compact Cylinder. Square body shape gives you flexibility for machine design

Series CQS. Compact Cylinder. Square body shape gives you flexibility for machine design ompact ylinder Series QS ø, ø, ø, ø Ideal for machine designs with small space requirements The - and -M auto switches will not protrude from switch mounting groove. Square body shape gives you flexibility

More information

210C-1 21 MPa double-acting type hydraulic cylinder

210C-1 21 MPa double-acting type hydraulic cylinder 17 2-1 21 MPa double-acting type hydraulic cylinder ompact design hydraulic cylinder at 21MPa. 21 MPa double-acting hydraulic cylinder with bores from 4 mm to 2 mm. Inovation of design scrutinized carefully

More information

Compatible with an operating environment with coolants.

Compatible with an operating environment with coolants. Water esistant Cylinder (Pneumatic/ydraulic) Pneumatic: CM/CG1/MB/MB1/CQ/C/MGP/MGG/MK/SQ Series ydraulic: CDKB/CF Series Compatible with an operating environment with coolants. CJ5 CG5 Y Water esistant

More information

Square Tube Type Air Cylinder

Square Tube Type Air Cylinder Standard: Double cting Single Rod Series C6 Square Tube Type ir Cylinder Series 1 ø, ø, ø, ø, ø, ø Single rod type Series 1 Double rod type Series 1W Non-rotating rod type Series 1K CJ1 CJP CJ2 CM2 C8

More information

Series RSH/RS1H. To stop pallets gently. Heavy Duty Stopper Cylinder. Stopper cylinder with built-in shock absorber. ø20, ø32 ø50, ø63, ø80

Series RSH/RS1H. To stop pallets gently. Heavy Duty Stopper Cylinder. Stopper cylinder with built-in shock absorber. ø20, ø32 ø50, ø63, ø80 1 eavy Duty Stopper Cylinder Series RS/RS1 ø, ø ø, ø, ø To stop pallets gently CX CY RC RS A MI S C G5-S Stopper cylinder with built-in shock absorber - -9-1 2 eavy Duty Stopper Cylinder Series RS/RS1

More information

Compact Cylinder. With a short overall length, the space saving cylinder helps to make various jigs and equipment more compact.

Compact Cylinder. With a short overall length, the space saving cylinder helps to make various jigs and equipment more compact. Compact Cylinder Series CQ ø, ø, ø, ø, ø, ø, ø, ø, ø, ø, ø, ø1, ø With a short overall length, the space saving cylinder helps to make various jigs and equipment more compact. Variations Standard Series

More information

Compact Rotary Actuator

Compact Rotary Actuator Compact Rotary ctuator CRQ2 Series Rack & Pinion Type/:,,,, : 17 mm : mm : 29 mm : 33 mm : 37 mm CR 2 CR1 MSU CRJ CR1 CRQ2 MSQ MSZ Rotation 360 type 360 CRQ2 MSQ MRQ Series Variations Page Rotating angle

More information

Rod end male thread. With rubber bumper 056(9/16") 075(3/4") 106(1 1/16") 150(1 1/2") 250(2 1/2") 300(3")

Rod end male thread. With rubber bumper 056(9/16) 075(3/4) 106(1 1/16) 150(1 1/2) 250(2 1/2) 300(3) T.ID0-1 New ompact ylinder Series NQ8 ore size: 06(9/16 ),(/ ),106(1 1/16 ),(1 1/ ) 00( ),0( 1/ ),00( ),00( ) Now available in 00 ( ) and 00 ( ) bore sizes Standard type ctuation Style uilt-in magnet Rod

More information

MHL2. Series 11- ø10, ø16, ø20, ø25. Parallel Type Wide Opening Air Gripper. How to Order. Model/Stroke. Clean series 11 Vacuum suction type

MHL2. Series 11- ø10, ø16, ø20, ø25. Parallel Type Wide Opening Air Gripper. How to Order. Model/Stroke. Clean series 11 Vacuum suction type eries ML2 ø, ø, ø, ø, ø, ø Parallel Type Wide pening ir ripper ow to rder lean series Vacuum suction type ML 2 22 ML 2 MN MN Wide opening Number of fingers 2 2 fingers ore size mm mm mm mm mm mm opper,

More information

Series C85. ISO Cylinder. Conforming to ISO 6432 and CETOP RP52P. ø8, ø10, ø12, ø16, ø20, ø25

Series C85. ISO Cylinder. Conforming to ISO 6432 and CETOP RP52P. ø8, ø10, ø12, ø16, ø20, ø25 ISO Cylinder Series C ø, ø0, ø, ø, ø, ø Conforming to ISO and CETOP RPP. Series Variations Standard Series C Series Non-rotating rod Series C ction Double acting Single acting Double acting Rod Single

More information

16% lighter kg. Air Cylinder kg. New. New. Weight. Reduced weight by changing the shape of the rod cover and head cover.

16% lighter kg. Air Cylinder kg. New. New. Weight. Reduced weight by changing the shape of the rod cover and head cover. ir Cylinder ø3, ø40, ø50, ø63, ø80, ø00 New RoS Weight (ø63-00 stroke) 6% lighter New Series Existing model.69 kg.0 kg Reduced weight by changing the shape of the rod cover and head cover. Series/ set

More information

Series CYP. Clean rodless cylinder ø15, ø32. How to Order

Series CYP. Clean rodless cylinder ø15, ø32. How to Order Series Clean rodless cylinder ø15, ø32 How to Order ir cylinder Clean rodless cylinder ore size (mm) 15 32 15 Cylinder bore size 15 15mm 32 32mm TN TF Port type M5 x 0.8 15 c NPT Standard stroke Standard

More information

Lube. Single rod. Non-lube CS1. series. Air-hydro. Lube. Double rod CS1W series. Non-lube. Non-lube

Lube. Single rod. Non-lube CS1. series. Air-hydro. Lube. Double rod CS1W series. Non-lube. Non-lube Air ylinder S Series,,,,,, J Series Variations Series Action asic Standard variations Page JP J JM Standard S Series S Series Double acting Single rod S series Double rod SW series 5 548 M M3 G G3 JM M

More information

Air Cylinder Series CG1

Air Cylinder Series CG1 ir Cylinder Series CG,,,,,,, Series Variations CJ Series Standard Series CG Substantially shorter length: to to mm (in comparison with Series CM) to to mm (in comparison with Series C), 9 to mm (in comparison

More information

Compact Hydraulic Cylinder. ø20, ø25, ø32, ø40, ø50, ø63, ø80, ø100. How to Order Z73. Bore size. 20mm 25mm 32mm 40mm 50mm 63mm 80mm 100mm

Compact Hydraulic Cylinder. ø20, ø25, ø32, ø40, ø50, ø63, ø80, ø100. How to Order Z73. Bore size. 20mm 25mm 32mm 40mm 50mm 63mm 80mm 100mm ompact ydraulic ylinder MPa Series KG ø, ø, ø, ø, ø, ø, ø, ø0 With uto Switch With auto switch (built-in magnet) KG DKG Mounting: asic type 0 ore size ow to Order mm mm mm mm mm mm mm 0mm Z3 Refer to "uto

More information

Compact Cylinder: Standard Type Double Acting, Single Rod. ø12, ø16, ø20, ø25, ø32, ø40, ø50, ø63, ø80, ø100. How to Order. Piping A76H A72H 200 V

Compact Cylinder: Standard Type Double Acting, Single Rod. ø12, ø16, ø20, ø25, ø32, ø40, ø50, ø63, ø80, ø100. How to Order. Piping A76H A72H 200 V Compact Cylinder: Standard Type Double cting, Single Rod,,,,,,,,, How to Order Without auto switch D With auto switch CDQ2 D JW S uilt-in magnet Mounting style Through-hole (Standard) oth ends tapped style

More information

Mini Free Mount Cylinder

Mini Free Mount Cylinder Mini Free Mount Cylinder Series ø, ø, ø, ø, ø, ø1, ø Series 1 ction Stroke 1 2 0 0 0 Clean uto switch series None Rod end Male threaded Without thread Solid state switch D-F D-M9 D-M9 W Female threaded

More information

Series NCM. Air Cylinder. Now available in 8 different bore sizes, 7/16" to 2".

Series NCM. Air Cylinder. Now available in 8 different bore sizes, 7/16 to 2. ir Cylinder Series NCM Now available in 8 different bore sizes, 7/16" to 2". 5 ctuation options available: Double cting, Single Rod Double cting, Double Rod Non-rotating Rod Single cting, Spring Return

More information

Series C95N. ISO/VDMA Cylinder: With Lock Type Double Acting, Single Rod. ø32, ø40, ø50, ø63, ø80, ø100. How to Order

Series C95N. ISO/VDMA Cylinder: With Lock Type Double Acting, Single Rod. ø32, ø40, ø50, ø63, ø80, ø100. How to Order ISO/VDMA Cylinder: ith Lock Type Double Acting, Single Rod Series CN ø, ø, ø, ø, ø, ø How to Order ithout auto switch CN B - XG ith auto switch CND B - XG Built-in magnet Mounting style B L G C D Basic/without

More information

Rotary actuator Rack & pinion type. Size: 8, 32, 63 Oscillating angle: 90, 180,

Rotary actuator Rack & pinion type. Size: 8, 32, 63 Oscillating angle: 90, 180, G V* H FH HP S2 H/ LH LHG HL/ HLG/ G HL HM G S *H H2 L2 N/ S/F Specifications escriptions Size ffective torque Note 1 N m ctuation Working fluid Max. working pressure MPa Min. working pressure Note 2 MPa

More information

Air Slide Table Reversible Type ø6, ø8, ø12, ø16, ø20, ø25

Air Slide Table Reversible Type ø6, ø8, ø12, ø16, ø20, ø25 ir Slide Table Reversible Type ø, ø, ø, ø1, ø, ø New Compliant to RoS directive Piping and adjuster positions can be changed on site to suit the installation conditions. Reversible design pplication Examples

More information

Air Cylinder. ø125, ø140, ø160, ø180, ø200, ø250, ø300. Lube. Single rod. Non-lube. Series. Air-hydro. Lube. Double rod. Non-lube CS1W.

Air Cylinder. ø125, ø140, ø160, ø180, ø200, ø250, ø300. Lube. Single rod. Non-lube. Series. Air-hydro. Lube. Double rod. Non-lube CS1W. Air ylinder Series S,,,,,, Series Variations Series Action asic Standard variations Page J JP J Standard Series S Series S Double acting Single rod Series S Double rod Series SW 4 M G M M A S S Series

More information

CJ2. Cushion. Rubber bumper (Standard) Air cushion (except ø6) Cylinder stroke (mm) Built-in magnet Nil. Action. Double acting Single rod +1.

CJ2. Cushion. Rubber bumper (Standard) Air cushion (except ø6) Cylinder stroke (mm) Built-in magnet Nil. Action. Double acting Single rod +1. eries -/- / CJ2 ir cylinder / ø, ø, ø ow to Order Clean eries Vacuum suction type Cushion Rubber bumper (tandard) ir cushion (except ø) - C D J 2 L - R 7B 21 - C D J 2 L - R 7B Copper, fluorine and silicon-

More information

LAll types with lock OHolds a workpiece during emergency stops.

LAll types with lock OHolds a workpiece during emergency stops. Pin lamp ylinders (L)KG32/(L)KU32 Series ø32 ompact ylinder Type (L)KG32 Magnetic field resistant auto switch and small auto switch mountable The clamping height can be selected. LOW type (-X2081) HIGH

More information

MAGNET TYPE RODLESS CYLINDERS SERIES CONTENTS

MAGNET TYPE RODLESS CYLINDERS SERIES CONTENTS CD drawing data catalog is available. CTUTORS GENERL CTLOG MGNET TYPE RODLESS CYLINDERS SERIES CONTENTS Features 59 MRC Series Specifications 6 Order Codes 6 Inner Construction, Major Parts and Materials

More information

Compact Cylinder with Lock

Compact Cylinder with Lock ompact ylinder with ock Series Q ø, ø, ø, ø, ø, ø, ø, ø J2 2 1 1 N N N NS S Q RQ U P 1 rop prevention when the pressure of air source is decreased or the residual pressure is released. rop prevention for

More information

Series NCM. Air Cylinder. Stainless Steel Body Cylinders 7/16", 9/16", 3/4", 7/8", 1-1/16", 1-1/4", 1-1/2", 2" Bore

Series NCM. Air Cylinder. Stainless Steel Body Cylinders 7/16, 9/16, 3/4, 7/8, 1-1/16, 1-1/4, 1-1/2, 2 Bore CT.ID2-2 ir Cylinder Series CM Stainless Steel ody Cylinders 7/16", 9/16", 3/4", 7/8", 1-1/16", 1-1/4", 1-1/2", 2" ore ow available in 7/16" and 9/16" bore Double Rod/Double End Mounting on-rotating Rod

More information

Sine Cylinder. Series REC. ø20, ø25, ø32, ø40 REA REB REC C Y C X MQ RHC RZQ. Sine cylinder. Individual. Velocity curve. Speed. Conventional cylinder

Sine Cylinder. Series REC. ø20, ø25, ø32, ø40 REA REB REC C Y C X MQ RHC RZQ. Sine cylinder. Individual. Velocity curve. Speed. Conventional cylinder Sine Cylinder Series,,, llows high speed transfer of work with dramatically reduced shock/impact. Velocity curve RE RE Speed Time Sine cylinder Conventional cylinder 3 Sine Cylinder Series,,, llows rapid

More information

Compact Guide Cylinder Series MGQ

Compact Guide Cylinder Series MGQ Compact Guide Cylinder Series ø, ø, ø, ø, ø, ø, ø, ø, ø, ø0 ir cylinder with guide integrated that has achieved anti-lateral load and high non-rotating accuracy. Space-saving cylinder. Suitable as stoppers

More information

Compact Rotary Actuator

Compact Rotary Actuator Compact Rotary ctuator Series Rack & Pinion Style/:,,,, : 17 mm : mm : 29 mm : 33 mm : 37 mm 360 type 360 CR2 CRU2 CR1 MSU CRJ CR1 MSQ MSZ MSQ MRQ Series Variations Standard Made to Order Rotating angle

More information

NFPA Interchangeable Air Cylinder Medium Duty Series. ø1.5", ø2", ø2.5", ø3.25", ø4"

NFPA Interchangeable Air Cylinder Medium Duty Series. ø1.5, ø2, ø2.5, ø3.25, ø4 NFP Interchangeable ir ylinder Medium Duty Series Series N ø.5", ø2", ø2.5", ø3.25", ø4" P 2 M2 2 S 76 85 95 P95 Medium Duty.5 to 4" Bore 2 Different NFP Mounting Options Non-rotating Option Tandem ylinder

More information

Air Cylinder: With End Lock. How to Order. Cylinder stroke (mm) (Refer to Standard Stroke on page 250.) H Head end lock. Rod boot. Nil.

Air Cylinder: With End Lock. How to Order. Cylinder stroke (mm) (Refer to Standard Stroke on page 250.) H Head end lock. Rod boot. Nil. Courtesy of CM/Flodyne/Hydradyne Motion Control Hydraulic Pneumatic Electrical Mechanical () 4-4 www.cmafh.com With auto switch F G C D U CM CDM With auto switch (uilt-in magnet) Mounting style asic style

More information

Air Cylinder. ø6, ø10, ø16. Easy installation. Reduced piston rod deflection

Air Cylinder. ø6, ø10, ø16. Easy installation. Reduced piston rod deflection ir Cylinder Series CJ2 ø, ø, ø CJ1 CJP Improved wear resistance The bearing portions of the rod cover and the clevis have been improved in wear resistance to ensure the longevity of the cylinder. Series

More information

22 mm Space required between the bottom of the cylinder body and your equipment is reduced. 24% Up to. Compact Guide Cylinder.

22 mm Space required between the bottom of the cylinder body and your equipment is reduced. 24% Up to. Compact Guide Cylinder. Compact Guide Cylinder Series ø2,,, ø2,,, ø, ø63,, ø0 Up to Weight reduced by up to 24% with a shorter guide rod and thinner plate 24% Weight reduced! 3 types of bearing can be selected. Slide bearing

More information

JIS Standard Hydraulic Cylinder Series CH2E/CH2F/CH2G/CH2H ø32, ø40, ø50, ø63, ø80, ø100

JIS Standard Hydraulic Cylinder Series CH2E/CH2F/CH2G/CH2H ø32, ø40, ø50, ø63, ø80, ø100 CT.ES- IS Standard ydraulic Cylinder Series C2E/C2/C2/C2 ø, ø, ø, ø, ø, ø IS Standard ydraulic Cylinder Exterior updated with all new metallic colors The cushion seal system reduces surge pressure generated

More information