ESCAPEMENT DEVICES DURA-SCAPE BC SERIES STANDARD LINE 2-1.1

Transcription

1 DURASCAPE BC SERIES STANDARD LINE Full range of sizes and strokes Hard Stops Robust design Few moving parts Extremely Durable Fully field serviceable Sensors Available See Page 21.2 FOR ORE INFORATION CALL US AT OR FAX:

2 DURASCAPE Escapement Devices BCSERIES DURASCAPE BC Series Escapement Devices is designed to isolate parts at the end of feed chutes or raceways to facilitate individual feeding of parts. These airoperated devices provide positive part control by forcing one finger to always be in contact with the parts. This process eliminates any possibility of jammed parts and multiple feeds. FEATURES DURASCAPE BC Series sets the industry standard for their extreme durability and rugged construction while still being low in cost. They provide a practical, reliable alternative for expensive escapement mechanisms. The two finger holders are square in the crosssection to present large, slide bearing surfaces to minimize surface wear. A flush type oiler with a ball closure permits lubricating both finger holders simultaneously while maintaining a compact package. Hard stops are provided for accurate and repeatable finger strokes with multiple standard strokes available for specific design requirements. Finger strokes can even be customized by end users to fit any need. The units are fully field repairable with available repair kits. Furthermore sensors are available for the entire product series. OUNTING STYLES DURASCAPE BC Series provides precision ground fingers with standard mounting holes allowing tooling to be shaped to accommodate a wide array of part sizes and shapes. A wide variety of body mounting holes are provided across the product line to allow positioning of the units in a horizontal, vertical or angular plane to suit the feed chute arrangement. The BC series of feed escapements are perfect for demanding applications where accurate, repeatable, and reliable part isolation are required. TECHNICAL SPECIFICATION Pneumatic Specifications ENGLISH Pressure Range psi 37 bar Cylinder Type Double Acting Dynamic Seals BunaN Required Valves 4way, 2 position COPACT LIGHT DUTY 9/16 [14.3] Cylinder Bore STANDARD DUTY 5/8 [15.9] Cylinder Bore HEAVY DUTY 7/8 [22.2] Cylinder Bore HEAVY DUTY 1 1/8 [28.6] Cylinder Bore BC1 See Page 21.3 BC2B See Page 21.7 BC4B See Page 21.8 BC6B Temperature Range BunaN Seals (standard) 30 to 180 F 35 to 80 C Viton Seals (V option) 20 to 300 F 30 to 150 C OPERATING PRINCIPLES See Page THIS PROCESS PRODUCES ONE ESCAPED PART (1) Pressure pushes both fingers in opposing directions through internal porting (2) With first finger fully extended the second finger pushes the locking pin and retracts. (3) With second finger fully retracted pressure is reversed and finger extends. (4) With second finger fully extended the first finger pushes the locking pin and retracts. Process repeats NOTE: Fingers must be allowed to fully extend for proper operation INT EXH INT EXH EXH INT EXH INT ADJUSTENT Achieved with nylon plugs to limit the amount the finger returns. If ordering stroke below max stroke the unit will include stops specific to ordered stroke. Hard stop kits are also available for user modification. (see parts page for ordering information) FOR ORE INFORATION CALL US AT OR FAX:

3 PRODUCT FEATURES DURASCAPE BC1 LIGHT DUTY Aircraft Grade Aluminum 2024 with black anodize Simple and Highly Durable Time tested, field approved design Extremely Compact Designed for tight applications One Part Body Design Extremely Durable and Rugged Sealed Oiler Allows for fast & easy routine oiling without disassembly Quality Components Precision Ground & hardened fingers Dowel & Tapped Holes For mounting and precision location Available agnetic Sensors Dovetail with Quick Disconnect Sensor agnet Standard in piston Hard Stops Accurate and repeatable stroke. Customizable Seals Standard BunaN with Viton option (V) Self Lube Bushings Finger support Locking Key Guarantees single part escapement Engineered Surface Coating Antifriction and antiwear coating on fingers OUNTING INFORATION DESIGNED ANUFACTURED ASSEBLED IN THE USA ounts and operates in any orientation AIN BODY TOOLING See DURASCAPE AT1LD Page for Universal Tooling for the BC1 ount tooling to fingers using Tapped holes. Key tooling to precision ground fingers for positive location. (T) Side ount to ain body using Tapped holes with Dowel Pins for positive location. Bottom ount thru ain body with Clearance holes and Dowel Pins for positive location. (T ) option turns Clearance holes into Tapped holes Front ount to ain body using Tapped holes with Dowel Pins for positive location. (R) Option rotates fingers 90 degrees if required for custom tooling FOR ORE INFORATION CALL US AT OR FAX:

4 DIENSIONAL DRAWING DURASCAPE BC1 LIGHT DUTY SPECIFICATIONS BC1 BC1 aximum Air Pressure 100 psi 6.9 bar aximum Stroke mm Thrust 100 psi / 6.9 bar 24.8 lbf N Unit Force Factor Extend 0.25 lbf/psi 16.0 N/bar Unit Force Factor Retract 0.20 lbf/psi 12.9 N/bar Base Weight 0.29 lb 0.13 kg Cylinder Bore Diameter 0.562" mm Displacement (per escaped part) 0.56 in cm 3 Actuation Time (per escaped part) 0.40 sec Parts Escaped Per inute 150 LOADING BC1 BC1 ax Static oment x, y, z 50 lbfin 5.6 Nm ax Dynamic oment x, y, z 5.0 lbfin 0.6 Nm Y X X Y HOW TO ORDER : BASIC UNIT BASIC ODEL BC1 FINGERS HOLES SEALS Inch: AX0.50, 0.25 mm: AX12.7, 6.4 If Stroke is not specified, one Hard Stop Kit (BC1H) will be included and unit will have max stroke. HOLES T Tapped Body FINGERS R Fingers Rotated 90º SEALS V Viton (standard Buna N) SAPLE ORDER: BC1R Ex) BC1 with rotated fingers, includes Hard Stop Kit (no stroke is specified) T R V ACCESSORIES (order separately) AGNETIC SENSOR KITS * (Dovetail mounted) DN agnetic Sensor NPN w/ quick disconnect Kit DP agnetic Sensor PNP w/ quick disconnect Kit * Sensor kits include (2) sensors and (2) 5 meter cables. AGNETIC SENSORS * (Dovetail mounted) DSN agnetic Sensor NPN w/ quick disconnect DSP agnetic Sensor PNP w/ quick disconnect * Includes (1) sensor. SENSOR CABLE SENCAB5 Quick Disconnect PUR Cable 5 Length TOOLING AT1LD Universal Tooling Adjustable, Spring Loaded (see DURASCAPE Accessories Pages for AT1LD info) FOR ORE INFORATION CALL US AT OR FAX:

5 EXPLODED VIEW DURASCAPE BC1 LIGHT DUTY H PARTS LIST HOW TO ORDER PARTS ITE REQ D NAE BC1 1 1 ain Body BC End Cap BC Finger BC Bushing * BC Piston BC Shuttle Pin * BC Plug * BC Air Disc BC Hard Stop BC Shaft Seal * SSA Oring (Piston) * ORG Oring (End Cap) * ORG Oring (Air Disc) * ORG012 1 Seal Kit # * BC1 H 1 Hard Stop * BC1H OPTIONS T 3 S 1 V 2 V 2 V 2 V 2 V 2 PART NUBER SAPLE ORDER: BC Ex) BC1 Hard Stop for 0.25 stroke OPTIONS (see product pages for information) 1 S = Stroke (only required for units that have specified strokes below maximum listed on product page) 2 V = Viton Seals option 3 T = Tapped Holes option OPTIONS NOTES * etric code not required # Seal Kit includes req d qty of parts marked Hard Stop Kit includes (2) full length Stops for user to modify FOR ORE INFORATION CALL US AT OR FAX:

6 PRODUCT FEATURES DURASCAPE BC2B/4B ROUND BODY Aircraft Grade Aluminum 2024 with black anodize Simple and Highly Durable Time tested, field approved design One Part Body Design Extremely Reliable and Durable Fully Field Serviceable With parts and factory repair kits Quality Components Precision Ground & Case hardened fingers Available agnetic Sensors Round Body with Quick Disconnect Sealed Oiler Allows for fast & easy routine oiling without disassembly Hard Stops Accurate and repeatable stroke. Customizable Seals Standard BunaN with Viton option (V) Self Lube Bushings Finger support Locking Key Guarantees single part escapement Engineered Surface Coating Antifriction and antiwear coating on fingers DESIGNED ANUFACTURED ASSEBLED IN THE USA OUNTING INFORATION ounts and operates in any orientation AIN BODY TOOLING BC2 and BC4 ount tooling to fingers using Tapped holes. Key tooling to precision ground fingers for positive location. (R) Option rotates fingers 90 degrees if required for custom tooling BC2 Bottom ount to ain body using Tapped holes. BC4 Bottom ount to ain body using Tapped holes or thru ain body with Clearance holes See DURASCAPE AT2LD Page for Universal Tooling for the BC2 FOR ORE INFORATION CALL US AT OR FAX:

7 DIENSIONAL DRAWING DURASCAPE BC2B STANDARD DUTY SPECIFICATIONS BC2B BC2B aximum Air Pressure 100 psi 6.9 bar aximum Stroke mm Thrust 100 psi / 6.9 bar 30.7 lbf N Unit Force Factor Extend 0.31 lbf/psi 19.8 N/bar Unit Force Factor Retract 0.26 lbf/psi 16.6 N/bar Base Weight 0.76 lbs 0.34 kg Cylinder Bore Diameter mm Displacement (per escaped part) in cm 3 Actuation Time (per escaped part) 0.60 sec Parts Escaped Per inute 100 X LOADING BC2B BC2B ax Static oment x, y, z 150 lbfin 16.9 Nm ax Dynamic oment x, y, z 15.0 lbfin 1.7 Nm Y X Y HOW TO ORDER : BASIC UNIT BASIC ODEL BC2B SENSOR READY SEALS Inch: AX0.75, 0.50, 0.25 mm: AX19.1, 12.7, 6.4 If Stroke is not specified, one Hard Stop Kit (BC2H) will be included and unit will have max stroke. SENSOR R agnetic Sensor Ready Includes Sensor slots and Piston agnets. Sensors sold separately see agnetic Sensors FINGERS R Fingers Rotated 90º SEALS V Viton (standard Buna N) R FINGERS R V SAPLE ORDER: BC2BR Ex) BC2B with rotated fingers, includes Hard Stop Kit (no stroke is specified) ACCESSORIES (order separately) AGNETIC SENSOR KITS * (Round track mounted) RN agnetic Sensor NPN w/ quick disconnect Kit RP agnetic Sensor PNP w/ quick disconnect Kit * Requires Sensor Ready (R). Sensor kits include (2) sensors and (2) 5 meter cables. AGNETIC SENSORS * (Round track mounted) RSN agnetic Sensor NPN w/ quick disconnect RSP agnetic Sensor PNP w/ quick disconnect * Requires Sensor Ready (R). Includes (1) sensor. SENSOR CABLE SENCAB5 Quick Disconnect PUR Cable 5 Length TOOLING AT2LD Universal Tooling Adjustable, Spring Loaded (see DURASCAPE Accessories Pages for AT2LD info) FOR ORE INFORATION CALL US AT OR FAX:

8 DIENSIONAL DRAWING DURASCAPE BC4B HEAVY DUTY SPECIFICATIONS BC4B BC4B aximum Air Pressure 100 psi 6.9 bar aximum Stroke mm Thrust 100 psi / 6.9 bar 60.1 lbf N Unit Force Factor Extend 0.60 lbf/psi 38.8 N/bar Unit Force Factor Retract 0.49 lbf/psi 31.6 N/bar Base Weight 1.36 lb 0.62 kg Cylinder Bore Diameter mm Displacement (per escaped part) in cm 3 Actuation Time (per escaped part) 0.70 sec Parts Escaped Per inute 85 X LOADING BC4B BC4B ax Static oment x, y, z 250 lbfin 28.2 Nm ax Dynamic oment x, y, z 25.0 lbfin 2.8 Nm Y X Y HOW TO ORDER : BASIC UNIT ACCESSORIES (order separately) SENSOR BASIC ODEL BC4B FINGERS SENSOR READY SEALS Inch: AX1.00, 0.75, 0.50 mm: AX25.4, 19.1, 12.7 If Stroke is not specified, one Hard Stop Kit (BC4H) will be included and unit will have max stroke. FINGERS R Fingers Rotated 90º SEALS V Viton (standard Buna N) R R agnetic Sensor Ready Includes Sensor slots and Piston agnets. Sensors sold separately see agnetic Sensors SAPLE ORDER: BC4BR Ex) BC4B with rotated fingers, includes Hard Stop Kit (no stroke is specified) R V AGNETIC SENSOR KITS * (Round track mounted) RN agnetic Sensor NPN w/ quick disconnect Kit RP agnetic Sensor PNP w/ quick disconnect Kit * Requires Sensor Ready (R). Sensor kits include (2) sensors and (2) 5 meter cables. AGNETIC SENSORS * (Round track mounted) RSN agnetic Sensor NPN w/ quick disconnect RSP agnetic Sensor PNP w/ quick disconnect * Requires Sensor Ready (R). Includes (1) sensor. SENSOR CABLE SENCAB5 Quick Disconnect PUR Cable 5 Length FOR ORE INFORATION CALL US AT OR FAX:

9 EXPLODED VIEW DURASCAPE BC2B/4B ROUND BODY H NOTE: BC2B UNIT IS SHOWN. HOWEVER THE ABOVE DIAGRA ALSO APPLIES TO THE BC4B EXCEPT THE FINGERS ARE SQUARE AND BODY DOES NOT HAVE ANGLED RELIEF. SEE BELOW FOR SPECIFIC PART NUBERS PARTS LIST HOW TO ORDER PARTS ITE REQ D NAE BC2B BC4B OPTIONS 1 1 ain Body BC201B BC401B R End Cap BC202 BC402 R Finger BC203 BC Bushing * BC204 BC Piston BC205 BC405 R Shuttle Pin * BC206 BC Plug * BC207 BC Air Disc BC Gasket * BC Hard Stop BC210 BC410 S Shaft Seal * SSA210 SSA215 V Oring (Piston) * ORG014 ORG018 V Oring (End Cap) * ORG016 ORG020 V 2 1 Seal Kit # * BC2 BC4 V 2 H 1 Hard Stop * BC2H BC4H PART NUBER SAPLE ORDER: BC Ex) BC2B Hard Stop for 0.50 stroke 2 V = Viton Seals option 3 R = Sensor Ready OPTIONS OPTIONS (see product pages for information) 1 S = Stroke (only required for units that have specified strokes below maximum listed on product page) NOTES * etric code not required # Seal Kits include req d qty of parts marked Hard Stop Kits includes (2) full length Stops for user to modify FOR ORE INFORATION CALL US AT OR FAX:

10 PRODUCT FEATURES DURASCAPE BC6B HEAVY DUTY Aircraft Grade Aluminum 2024 with black anodize Simple and Highly Durable Time tested, field approved design One Part Body Design Extremely Reliable and Durable Dowel & Tapped Holes For mounting and precision location Available agnetic Sensors Round Body with Quick Disconnect Sealed Oiler Allows for fast & easy routine oiling without disassembly Hard Stops Accurate and repeatable stroke. Customizable Quality Components Precision Ground & Case hardened fingers Seals Standard BunaN with Viton option (V) Self Lube Bushings Finger support Locking Key Guarantees single part escapement Engineered Surface Coating Antifriction and antiwear coating on fingers DESIGNED ANUFACTURED ASSEBLED IN THE USA OUNTING INFORATION ounts and operates in any orientation AIN BODY TOOLING ount tooling to fingers using Tapped holes. Key tooling to precision ground fingers for positive location. (R) Option rotates fingers 90 degrees if required for custom tooling Bottom ount to ain body using Tapped holes with Dowel Pins for positive location. ount thru unit with Clearance holes. FOR ORE INFORATION CALL US AT OR FAX:

11 DIENSIONAL DRAWING DURASCAPE BC6B HEAVY DUTY SPECIFICATIONS BC6B BC6B aximum Air Pressure 100 psi 6.9 bar aximum Stroke mm Thrust 100 psi / 6.9 bar 99.4 lbf N Unit Force Factor Extend 0.99 lbf/psi 64.1 N/bar Unit Force Factor Retract 0.88 lbf/psi 57.0 N/bar Base Weight 2.14 lb 0.97 kg Cylinder Bore Diameter mm Displacement (per escaped part) in cm 3 Actuation Time (per escaped part) 0.70 sec Parts Escaped Per inute 85 X LOADING BC6B BC6B ax Static oment x, y, z 250 lbfin 28.2 Nm ax Dynamic oment x, y, z 25.0 lbfin 2.8 Nm Y X Y HOW TO ORDER : BASIC UNIT ACCESSORIES (order separately) SENSOR BASIC ODEL BC6B SENSOR READY SEALS Inch: AX1.25, 1.00, 0.50 mm: AX31.8, 25.4, 12.7 If Stroke is not specified, one Plug Kit (BC6H) will be included and unit will have max stroke. FINGERS R Fingers Rotated 90º SEALS V Viton (standard Buna N) FINGERS R R V R agnetic Sensor Ready Includes Sensor slots and Piston agnets. Sensors sold separately see agnetic Sensors SAPLE ORDER: BC6BR Ex) BC6B with rotated fingers, includes Hard Stop Kit (no stroke is specified) AGNETIC SENSOR KITS * (Round track mounted) RN agnetic Sensor NPN w/ quick disconnect Kit RP agnetic Sensor PNP w/ quick disconnect Kit *Requires Sensor Ready (R). Sensor kits include (2) sensors and (2) 5 meter cables. AGNETIC SENSORS * (Round track mounted) RSN agnetic Sensor NPN w/ quick disconnect RSP agnetic Sensor PNP w/ quick disconnect *Requires Sensor Ready (R). Includes (1) sensor. SENSOR CABLE SENCAB5 Quick Disconnect PUR Cable 5 Length FOR ORE INFORATION CALL US AT OR FAX:

12 EXPLODED VIEW DURASCAPE BC6B HEAVY DUTY H PARTS LIST HOW TO ORDER PARTS ITE REQ D NAE BC6B 1 1 ain Body BC End Cap BC Finger BC Bushing * BC Piston BC Shuttle Pin * BC Plug * BC Air Disc BC Gasket * BC Hard Stop BC Shaft Seal * SSA Oring (Piston) * ORG Oring (End Cap) * ORG024 1 Seal Kit # * BC6 H 1 Hard Stop * BC6H OPTIONS R 3 R 3 R 3 S 1 V 2 V 2 V 2 V 2 PART NUBER SAPLE ORDER: BC Ex) BC6B Hard Stop for 0.50 stroke 2 V = Viton Seals option 3 R = Sensor Ready OPTIONS OPTIONS (see product pages for information) 1 S = Stroke (only required for units that have specified strokes below maximum listed on product page) NOTES * etric code not required # Seal Kit includes req d qty of parts marked Hard Stop Kit includes (2) full length Stops for user to modify FOR ORE INFORATION CALL US AT OR FAX: