Parts List for: Sheet No. 1 of 7. Rev. 19 Date: 4 Nov SPX Hydraulic Technologies. powerteam.com. Model B Units.

Transcription

1 SPX Hydraulic Technologies th Street Rockford, IL USA Tech. Services: (800) Fax: (800) Order Entry: (800) Fax: (800) powerteam.com SPX Corporation 655 Eisenhower Drive Owatonna, N USA Phone: (507) Tech. Services: (800) Fax: (800) Order Entry: (507) Fax: (800) International Sales: (507) Fax: (507) Parts List for: * * B HE172 HE174 P PA172 PA174 PE17-PARK * * Form No PE17-SOLO PE172 PE172-ABC PE172-ET-230 PE172-FS PE172A PE172A-BOC PE172A-DAYCO PE172A-EZE PE172A-FINN PE172A-GRC PE172A-ITR PE172AF-CLEV PE172AH-CLEV * PE172A PE172A PE172F-CLEV PE172H-CLEV * PE172 PE PE172SF-CLEV PE PFAFF PE173-PC * PE174 * PE174 PE174-ETT PE PE PFAFF HYDRAULIC PUP * odel B Units. Sheet No. 1 of 7 SPX Hydraulic Technologies Rev. 19 Date: 4 Nov 2009

2 Parts List, Form No , Back sheet 1 of 7 Item Part No. No. No. Reqʼd Description Cord Set (Elect. Version) Filler/Vent Plug Filler/Vent Plug Remote Hand Switch Ass'y (Elect. Version; See Form No ) Remote Foot Switch Ass'y (For P116-10, PE172AF-CLEV, PE172-FS PE172F-CLEV, & PE172H-CLEV) Retaining Ring (1-3/16 Shaft) Ball Bearing Eccentric Slotted Spring Pin Drive Shaft Gerotor Drive Pin Pump ounting Bracket Washer (3/8 bolt) Cap Screw (3/8-16 UNC X 1" Lg.; Torque to 230/250 in. lbs.) 13 * Seal Seal Filter Support Filter Clamp Ring Cap Screw (1/4-20 UNC X 1-3/4 Lg.; Torque to 60/80 in. lbs.) Lower Gerotor Housing Gerotor Set 20 * O-ring (2-1/8 X 1-15/16 X 3/32) O-ring (2-1/8 X 1-15/16 X 3/32) Upper Gerotor Housing Swivel Elbow Fitting Nut (Air & Electric Versions) Hose Ass'y Brass Washer (1/2 Bolt) Set Screw (Torque to 60/80 in. lbs.) Set Screw (Air Version) Cap Screw (1/4-20 UNC X 1-1/2 Lg.; Torque to 110/130 in. lbs.) High Pressure Piston Piston Block Valve Guide 33 * Compression Spring (5/32 O.D. X 3/4 Lg.) 34 * Ball (3/16 Dia.) Check Block 36 * O-ring (7/16 X 5/16 X 1/16) O-ring (7/16 X 5/16 X 1/16) 37 * Copper Washer (3/8 X 1/4 X 1/32 Thk.) 38 * Replaceable Seat Hollow Lock Screw (7/16-20 UNF-3A; Torque to 110/130 in. lbs.) Relief Valve Ass'y Note: Shaded areas reflect last revision(s) made to this form Relief Valve Ass'y (For PE172A-ITR & PE172A-FINN; Set at 8,900/9,500) Tee Fitting Handle (Air & Electric Versions) WH2 1 Electric otor 58196BK2 1 Electric otor (For PE172AF-CLEV, PE172AH-CLEV, PE172F-CLEV, & PE172H-CLEV) 58196BL20 1 Electric otor (For P116-10) Air otor (For models 4045, 4047, PA172, & PA174 manufactured after July 1991) Cap Screw (5/16-18 UNC X 3/4 Lg.; Torque to 220/240 in. lbs.) AR Self-Tapping Screw (1/4-10 X 7/8 Lg.) Screw (1/4-20 UNC X 3/4 Lg.; For pumps with metal reservoirs.) Reservoir 61165BK2 1 Reservoir (For PE172AF-CLEV, PE172AH-CLEV, PE172SF-CLEV, PE172F-CLEV, & PE172H-CLEV) 64538OR9 1 Reservoir (For PE172, PE172A, PE174A, PE172A , PE172A & PE ) 40063OR9 1 Reservoir (For PE17-SOLO) Part numbers marked with an asterisk (*) are contained in Repair Kit No Part numbers marked with a dagger ( ) are contained in EPR Seal Kit No AR: As Required Continued -

3 Parts List Form No Item Part No. No. No. Reqʼd Description BK2 1 Cover Plate 61166RE2 1 Cover Plate (For P116-10) 66218BK2 1 Cover Plate (For PE17-PARK, PE172-ABC, PE172A-BOC & PE17-SOLO) 48 * Cover Gasket 49 * O-ring (13/16 X 5/8 X 3/32) O-ring (13/16 X 5/8 X 3/32) 50 * O-ring (5/16 X 3/16 X 1/16) O-ring (5/16 X 3/16 X 1/16) Dowel Pin (1/8 Dia. X 3/4 Lg.) 52 * Compression Spring (3/16 O.D. X 1" Lg.) Pipe Plug (1/8 NPTF) Outlet Ball Stop Check Body 56 * O-ring (3/8 X 1/4 X 1/16) O-ring (3/8 X 1/4 X 1/16) Dowel Pin (3/16 Dia. X 1" Lg.; Loctite Pin in Piston Hole with Radius End Out) 58 * Compression Spring (1" O.D. X 7/8 Lg.) 59 * O-ring (2" X 1-5/8 X 3/16) O-ring (2" X 1-5/8 X 3/16) Automatic Valve Piston Automatic Valve Block Cap Screw (1/4-20 UNC X 2" Lg.; Torque to 40/50 in. lbs.) Dowel Pin (1/4 Dia. X 1/2 Lg.; Tapered End Toward Spring) Compression Spring (1/4 O.D. X 1" Lg.) Locknut (3/8-24 UNF) 66 * Adjusting Screw Trade Name Decal (For 4044, 4045, 4046, & 4047) Trade Name Decal (For ) Trade Name Decal (For ) Trade Name Decal (For PE17 Series) Trade Name Decal (For HE172) Trade Name Decal (For HE174) Trade Name Decal (For B) Trade Name Decal (For PE PFAFF & PE PFAFF) Pipe Plug (1/8 NPTF) Rubber Seal Rubber Seal Lockwasher (1/4 Bolt; Air & Electric Versions) Cap Screw (1/4-20 UNC X 3/4 Lg.; Torque to 60/80 in. lbs.; Air & Electric Versions) Washer (Electric Versions) PARTS INCLUDED BUT NOT SHOWN * Warning Decal (Elect. versions) Decal (CSA Approval; For 4044, , 4046, PE172A-ITR & PE172A-FINN) Decal (EPR Seals) Tube Elbow ale Connector Oil Line Fitting (For PE172AF-CLEV & PE172AH-CLEV) Coupler (For PE172AF-CLEV, PE172AH-CLEV, PE172F-CLEV, & PE172H-CLEV) Plug Fitting (3/8 NPTF; For PE172AF-CLEV, & PE172AH-CLEV) Decal (ISO; For PE172A-DAYCO) Coupler (For PE172A-EZE) Gasket (Between motor and cover plate) Serial No. Decal (PFAFF; For PE PFAFF) Foot Switch Guard (For P116-10) 42576WH2 1 Control Box Cover (For PE17-SOLO) Elbow Fitting (For PE172F-CLEV & PE172H-CLEV) Part numbers marked with an asterisk (*) are contained in Repair Kit No Part numbers marked with a dagger ( ) are contained in EPR Seal Kit No Note: Shaded areas reflect last revision(s) made to this form. Sheet No. 2 of 7 Rev. 19 Date: 4 Nov 2009

4 Parts List, Form No , Back sheet 2 of 7 AIR OTOR VERSION (For model no.'s 4045, 4047, PA172 & PA174 manufactured before July 1991) Note: For air version pump models manufactured after July 1991, refer to the list on back sheet 1 of Item Part No. No. No. Req'd Description Cap Screw (5/16-18 UNC X 1/2 Lg.) achine Screw (1/4-20 UNC X 1/2 Lg.) Bracket Handle 5 * Air otor Set Screw (1/4-20 UNC X 1/2 Lg.; Turn in Until Flush with Cover Plate) Straight Fitting (For 4045 & 4047) Straight Fitting (For PA172 & PA174) Directional Valve (For 4045 & 4047) Directional Valve (For PA172 & PA174) uffler *Note: For air motor repair kit, order no Refer to any operating instructions included with this product for detailed information about operation, testing, disassembly, reassembly, and preventive maintenance. Items found in this parts list have been carefully tested and selected. Therefore: Use only genuine replacement parts! Additional questions can be directed to our Technical Services Department.

5 Parts List Form No OPTIONAL VALVE ASSEBLIES 4-Way Tandem Center Directional Valve Item Part No. Item Part No. No. No. Req'd Description No. No. Req'd Description Way Valve Ass'y (see Form No ) 2 * O-ring (1/2 X 3/8 X 1/16) O-ring (1/2 X 3/8 X 1/16) 3 * Backup Washer (1/2 X 3/8 X 1/16) Coupling Cap Screw (5/16-18 UNC X 3/4 Lg.; Torque to 220/240 in. lbs.) Adapter Block anifold 7 * Gasket 8 * Copper Washer (1/4 Bolt) 9 * Replaceable Seat 10 * Steel Ball (3/16 Dia.) Hollow Lock Screw (7/16-20 UNF-3A; Torque to 110/130 in. lbs.) 12 * Compression Spring (5/32 O.D. X 5/8 Lg.) Outlet Ball Stop Part numbers marked with an asterisk (*) are contained in Repair Kit No Part numbers marked with a dagger ( ) are contained in EPR Seal Kit No Part numbers marked with a bullet ( ) are contained in Outlet Check Repair Kit No Sheet No. 3 of 7 Rev. 19 Date: 4 Nov 2009

6 Parts List, Form No , Back sheet 3 of 7 OPTIONAL VALVE ASSEBLIES 2 Position, 2-Way anual Valve Item Part No. Item Part No. No. No. Req'd Description No. No. Req'd Description 1 * Gasket 2 * Retaining Ring (9/16 Shaft) Washer (3/16 Bolt) 4 * Compression Spring (1/4 O.D. X 5/8 Lg.) 5 * Steel Ball (9/32 Dia.) Cap Screw (5/16-18 UNC X 2-1/2 Lg.; Torque to 220/240 in. lbs.) Valve Body 8 * O-ring (7/16 X 5/16 X 1/16) O-ring (7/16 X 5/16 X 1/16) 9 * Backup Washer (7/16 X 5/16 X 3/64 Thk.) Release Valve Screw Release Valve Handle Set Screw (1/4-20 UNC X 1/4 Lg.; Torque to 30/50 in. lbs.) 13 * O-ring (1/2 x 3/8 X 1/16) O-ring (1/2 x 3/8 X 1/16) 14 * Backup Washer (1/2 X 3/8 X 1/16) Coupling Outlet Ball Stop (Part of the Basic Pump Ass'y) Complete Valve Ass'y (Consists of Items 1 thru 15) Part numbers marked with an asterisk (*) are contained in Repair Kit No Part numbers marked with a dagger ( ) are contained in EPR Seal Kit No

7 Parts List Form No ANIFOLD ASSEBLY Item Part No. Item Part No. No. No. Req'd Description No. No. Req'd Description Cap Screw (5/16-18 UNC X 2-1/2 Lg.; Torque to 220/240 in. lbs.) anifold 3 * Gasket 4 * O-ring (1/2 X 3/8 X 1/16) O-ring (1/2 X 3/8 X 1/16) 5 * Backup Washer (1/2 X 3/8 X 1/16) Coupling Drain Line Outlet Ball Stop (Part of the Basic Pump Ass'y) Part numbers marked with as asterisk (*) are contained in Repair Kit No Part numbers marked with a dagger ( ) are contained in EPR Seal Kit No Sheet No. 4 of 7 Rev. 19 Date: 4 Nov 2009

8 Parts List, Form No , Back sheet 4 of 7 HYDRAULIC SCHEATIC FOR ELECTRIC OTOR PUPS HP INTERNAL RELIEF VALVE 10,400 P.S.I. 9,150 P.S.I. FOR PE172A-ITR LP OUTLET AUTOATIC VALVE LOW PRESSURE RELIEF VALVE 260 P.S.I. NOTE: EASURED AT FITTING. HYDRAULIC SCHEATIC FOR AIR OTOR PUPS HP INTERNAL RELIEF VALVE 10,400 P.S.I. LP OUTLET AUTOATIC VALVE LOW PRESSURE RELIEF VALVE 290 P.S.I. NOTE: EASURED AT FITTING.

9 Parts List Form No OTOR CONTROL ASSEBLY FOR PE172A-EZE POWER CORD GROUND (UST BE ISOLATED BETWEEN NUTS AND CAN BE AT TOP OR BOTTO OF STACK.) 16 17, 18 FOR PROPER OTOR VOLTAGE CONNECTION AND ROTATION SEE CONNECTION INFORATION SUPPLIED WITH OTOR. TR-2 TR TR "A" "A" NOTE: SERRATED LOCK WASHER UST BE ADJACENT TO ETAL BOX. ORE WASHERS CAN BE USED IF DESIRED. VIEW A-A , 10, 11 X1 X2 T H1 H2 H3 H , Sheet No. 5 of 7 Rev. 19 Date: 4 Nov 2009

10 Parts List, Form No , Back sheet 5 of 7 Item Part No. Item Part No. No. No. Reqʼd Description No. No. Reqʼd Description Screw (6-20 X 1/4 Lg.) Screw (8-32 UNC X 5/16 Lg.) Starter Electrical Relay Strain Relief Bushing Cord (8 ft.; For 115 V. pumps) ' Electrical Cable (For 220 V. pumps) Conduit Connector Screw (8-32 x 3/8 Lg.) Washer (For #8 bolt) Screw (8-32 UNC X 1/2 Lg.) Nut (#8-32 UNC) Washer (#8 External Tooth) WH2 1 Electrical Control Box Transformer Screw (#10-24 UNC X 3/4 Lg.) Washer (#10 External Tooth) Nut (#10-24 UNC) Nipple Conduit Locknut L1 ELECTRICAL SCHEATIC FOR PE172A-EZE L2 L3 1 TR H1 H3 H2 H4 T Note: Transformer connections are as shown for 115 v., 50/60 Hz. X1 CUSTOER CONNECTION 24V X2 For 220 v., 50/60 Hz. units, transformer connections to be as follows: H1 to L1 H2 to H3 H4 to L2

11 Parts List Form No OTOR CONTROL ASSEBLY FOR PE172-ABC FOR PROPER OTOR VOLTAGE CONNECTION AND ROTATION SEE CONNECTION INFORATION SUPPLIED WITH OTOR. TR TR-1 TR-2-2 THIS VIEW ROTATED 180 TO SHOW WIRE CONNECTIONS. 25 PB2 (STOP) 1 2 PB1 (START) , , 22 PGT-4 FU X1 X2 T H1 H2 H3 H , 14 18, 19 NOTE: No. 29 (.136) drill in motor, if req'd. ax. drill depth to be.265 deep from outside surface of motor. Place washer (12355) between box & motor as a spacer. 17 PGT-2 POWER CORD GROUND (UST BE ISOLATED BETWEEN NUTS AND CAN BE AT TOP OR BOTTO OF STACK.) PGT-1 15 PGT-3 11 GROUND -1 "A" "A" NOTE: SERRATED LOCK WASHER UST BE ADJACENT TO ETAL BOX. ORE WASHERS CAN BE USED IF DESIRED. VIEW "A-A" Sheet No. 6 of 7 Rev. 19 Date: 4 Nov 2009

12 Parts List, Form No , Back sheet 6 of 7 Item Part No. Item Part No. No. No. Reqʼd Description No. No. Reqʼd Description Push Button Switch Snap Plug WH2 1 Control Box Cover Pan Hd. Screw (8-18 x 3/8) WH2 1 Electrical Control Box Contactor (2 pole) Rnd. Hd. Screw (10-24 x 1/4) Ground Decal Strain Relief Bushing ' Cable (18/3 SJTO) Strain Relief Bushing Cord (8' Lg.; 115 V. 12/3 SJTO) Rnd. Hd. Screw (10-24 x 1) Ext. Tooth Washer (.40 x.20) Hex Nut (10-24) Pressure Switch (See Form No ) Strain Relief Bushing Pan Hd. Screw (8-32 x 1/2) Special Washer (.53 x.21) Transformer Fuse (1.25 AP 250 V.) Fuse Holder Nipple Plain Washer (1.76 x.95) Warning Decal ELECTRICAL SCHEATIC FOR PE172-ABC L1 L2 1 TR H1 H3 H2 H4 X1 24V. 4 X2 FUSE 1.25A PB2 PB1 2 LS PS (N.O. HELD CLOSED) CUSTOER CONNECTION

13 Parts List Form No OTOR CONTROL ASSEBLY FOR PE17-SOLO CONTROL BOX HEX. NUT 1 (ETAL SWITCH GUARD) FOR PROPER OTOR VOLTAGE CONNECTION AND ROTATION SEE CONNECTION INFORATION SUPPLIED WITH OTOR. ANTI-ROTATION KEYED WASHER INTERNAL TOOTH LOCK WASHER HEX. NUT TR-2 TR TR TGS -1 4 PGT-1 PGT-2 5, 6 NOTE: NO. 29 (.136) DRILL IN OTOR, IF REQ D. DRILL DEPTH TO BE.265 DEEP FRO OUTSIDE SURFACE OF OTOR. PLACE WASHER (12355) BETWEEN BOX & OTOR AS SPACER. 7 8 POWER CORD GROUND (UST BE ISOLATED BETWEEN NUTS AND CAN BE AT TOP OR BOTTO OF STACK.) NOTE: SERRATED LOCK WASHER UST BE ADJACENT TO ETAL BOX. ORE WASHERS CAN BE USED IF DESIRED. Sheet No. 7 of 7 Rev. 19 Date: 4 Nov 2009

14 Parts List, Form No , Back sheet 7 of 7 Item Part No. Item Part No. No. No. Reqʼd Description No. No. Reqʼd Description Switch Guard Toggle Switch Nipple WH2 1 Electrical Control Box Pan Hd. Screw (8-32 x 3/8) Plain Washer (.44 x.19) Strain Relief Bushing Cord (8' Lg.; 115 V. 16/3 SJTO) Rnd. Hd. Screw (10-24 x 3/4) Ext. Tooth Washer (.40 x.20) Hex Nut (10-24) ELECTRICAL SCHEATIC FOR PE17-SOLO L1 L2 TGS OFF ON TR ELECTRICAL SCHEATIC FOR PUPS WITH REOTE CONTROLS ODEL A UNITS ODEL B UNITS L1 L2 L3 L1 L2 1 REOTE H1 H3 H2 H4 24V X1 X2 REOTE ELECTRICAL SCHEATIC FOR PE172A-BOC L1 L2 L3